xref: /spdk/test/unit/lib/iscsi/iscsi.c/iscsi_ut.c (revision 06b537bfdb4393dea857e204b85d8df46a351d8a)
1 /*-
2  *   BSD LICENSE
3  *
4  *   Copyright (c) Intel Corporation.
5  *   All rights reserved.
6  *
7  *   Redistribution and use in source and binary forms, with or without
8  *   modification, are permitted provided that the following conditions
9  *   are met:
10  *
11  *     * Redistributions of source code must retain the above copyright
12  *       notice, this list of conditions and the following disclaimer.
13  *     * Redistributions in binary form must reproduce the above copyright
14  *       notice, this list of conditions and the following disclaimer in
15  *       the documentation and/or other materials provided with the
16  *       distribution.
17  *     * Neither the name of Intel Corporation nor the names of its
18  *       contributors may be used to endorse or promote products derived
19  *       from this software without specific prior written permission.
20  *
21  *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22  *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23  *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24  *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25  *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26  *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27  *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28  *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29  *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  */
33 
34 #include "spdk/stdinc.h"
35 
36 #include "spdk/endian.h"
37 #include "spdk/scsi.h"
38 #include "spdk_cunit.h"
39 
40 #include "CUnit/Basic.h"
41 
42 #include "iscsi/iscsi.c"
43 
44 #include "../common.c"
45 #include "iscsi/portal_grp.h"
46 #include "scsi/scsi_internal.h"
47 #include "common/lib/test_env.c"
48 
49 #include "spdk_internal/mock.h"
50 
51 #define UT_TARGET_NAME1		"iqn.2017-11.spdk.io:t0001"
52 #define UT_TARGET_NAME2		"iqn.2017-11.spdk.io:t0002"
53 #define UT_INITIATOR_NAME1	"iqn.2017-11.spdk.io:i0001"
54 #define UT_INITIATOR_NAME2	"iqn.2017-11.spdk.io:i0002"
55 #define UT_ISCSI_TSIH		256
56 
57 struct spdk_iscsi_tgt_node	g_tgt;
58 
59 struct spdk_iscsi_tgt_node *
60 iscsi_find_tgt_node(const char *target_name)
61 {
62 	if (strcasecmp(target_name, UT_TARGET_NAME1) == 0) {
63 		g_tgt.dev = NULL;
64 		return (struct spdk_iscsi_tgt_node *)&g_tgt;
65 	} else {
66 		return NULL;
67 	}
68 }
69 
70 bool
71 iscsi_tgt_node_access(struct spdk_iscsi_conn *conn,
72 		      struct spdk_iscsi_tgt_node *target,
73 		      const char *iqn, const char *addr)
74 {
75 	if (strcasecmp(conn->initiator_name, UT_INITIATOR_NAME1) == 0) {
76 		return true;
77 	} else {
78 		return false;
79 	}
80 }
81 
82 DEFINE_STUB(iscsi_tgt_node_is_redirected, bool,
83 	    (struct spdk_iscsi_conn *conn, struct spdk_iscsi_tgt_node *target,
84 	     char *buf, int buf_len),
85 	    false);
86 
87 DEFINE_STUB(iscsi_send_tgts, int,
88 	    (struct spdk_iscsi_conn *conn, const char *iiqn,
89 	     const char *tiqn, uint8_t *data, int alloc_len, int data_len),
90 	    0);
91 
92 DEFINE_STUB(iscsi_tgt_node_is_destructed, bool,
93 	    (struct spdk_iscsi_tgt_node *target), false);
94 
95 DEFINE_STUB_V(iscsi_portal_grp_close_all, (void));
96 
97 DEFINE_STUB_V(iscsi_conn_schedule, (struct spdk_iscsi_conn *conn));
98 
99 DEFINE_STUB_V(iscsi_conn_free_pdu,
100 	      (struct spdk_iscsi_conn *conn, struct spdk_iscsi_pdu *pdu));
101 
102 DEFINE_STUB_V(iscsi_conn_pdu_generic_complete, (void *cb_arg));
103 
104 DEFINE_STUB(iscsi_conn_handle_queued_datain_tasks, int,
105 	    (struct spdk_iscsi_conn *conn), 0);
106 
107 DEFINE_STUB(iscsi_conn_abort_queued_datain_task, int,
108 	    (struct spdk_iscsi_conn *conn, uint32_t ref_task_tag), 0);
109 
110 DEFINE_STUB(iscsi_conn_abort_queued_datain_tasks, int,
111 	    (struct spdk_iscsi_conn *conn, struct spdk_scsi_lun *lun,
112 	     struct spdk_iscsi_pdu *pdu), 0);
113 
114 DEFINE_STUB(iscsi_chap_get_authinfo, int,
115 	    (struct iscsi_chap_auth *auth, const char *authuser, int ag_tag),
116 	    0);
117 
118 DEFINE_STUB(spdk_sock_set_recvbuf, int, (struct spdk_sock *sock, int sz), 0);
119 
120 int
121 spdk_scsi_lun_get_id(const struct spdk_scsi_lun *lun)
122 {
123 	return lun->id;
124 }
125 
126 DEFINE_STUB(spdk_scsi_lun_is_removing, bool, (const struct spdk_scsi_lun *lun),
127 	    true);
128 
129 struct spdk_scsi_lun *
130 spdk_scsi_dev_get_lun(struct spdk_scsi_dev *dev, int lun_id)
131 {
132 	if (lun_id < 0 || lun_id >= SPDK_SCSI_DEV_MAX_LUN) {
133 		return NULL;
134 	}
135 
136 	return dev->lun[lun_id];
137 }
138 
139 DEFINE_STUB(spdk_scsi_lun_id_int_to_fmt, uint64_t, (int lun_id), 0);
140 
141 DEFINE_STUB(spdk_scsi_lun_id_fmt_to_int, int, (uint64_t lun_fmt), 0);
142 
143 DEFINE_STUB(spdk_scsi_lun_get_dif_ctx, bool,
144 	    (struct spdk_scsi_lun *lun, struct spdk_scsi_task *task,
145 	     struct spdk_dif_ctx *dif_ctx), false);
146 
147 static void
148 op_login_check_target_test(void)
149 {
150 	struct spdk_iscsi_conn conn = {};
151 	struct spdk_iscsi_pdu rsp_pdu = {};
152 	struct spdk_iscsi_tgt_node *target;
153 	int rc;
154 
155 	/* expect success */
156 	snprintf(conn.initiator_name, sizeof(conn.initiator_name),
157 		 "%s", UT_INITIATOR_NAME1);
158 
159 	rc = iscsi_op_login_check_target(&conn, &rsp_pdu,
160 					 UT_TARGET_NAME1, &target);
161 	CU_ASSERT(rc == 0);
162 
163 	/* expect failure */
164 	snprintf(conn.initiator_name, sizeof(conn.initiator_name),
165 		 "%s", UT_INITIATOR_NAME1);
166 
167 	rc = iscsi_op_login_check_target(&conn, &rsp_pdu,
168 					 UT_TARGET_NAME2, &target);
169 	CU_ASSERT(rc != 0);
170 
171 	/* expect failure */
172 	snprintf(conn.initiator_name, sizeof(conn.initiator_name),
173 		 "%s", UT_INITIATOR_NAME2);
174 
175 	rc = iscsi_op_login_check_target(&conn, &rsp_pdu,
176 					 UT_TARGET_NAME1, &target);
177 	CU_ASSERT(rc != 0);
178 }
179 
180 static void
181 op_login_session_normal_test(void)
182 {
183 	struct spdk_iscsi_conn conn = {};
184 	struct spdk_iscsi_portal portal = {};
185 	struct spdk_iscsi_portal_grp group = {};
186 	struct spdk_iscsi_pdu rsp_pdu = {};
187 	struct iscsi_bhs_login_rsp *rsph;
188 	struct spdk_iscsi_sess sess = {};
189 	struct iscsi_param param = {};
190 	int rc;
191 
192 	/* setup related data structures */
193 	rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu.bhs;
194 	rsph->tsih = 0;
195 	memset(rsph->isid, 0, sizeof(rsph->isid));
196 	conn.portal = &portal;
197 	portal.group = &group;
198 	conn.portal->group->tag = 0;
199 	conn.params = NULL;
200 
201 	/* expect failure: NULL params for target name */
202 	rc = iscsi_op_login_session_normal(&conn, &rsp_pdu, UT_INITIATOR_NAME1,
203 					   NULL, 0);
204 	CU_ASSERT(rc != 0);
205 	CU_ASSERT(rsph->status_class == ISCSI_CLASS_INITIATOR_ERROR);
206 	CU_ASSERT(rsph->status_detail == ISCSI_LOGIN_MISSING_PARMS);
207 
208 	/* expect failure: incorrect key for target name */
209 	param.next = NULL;
210 	rc = iscsi_op_login_session_normal(&conn, &rsp_pdu, UT_INITIATOR_NAME1,
211 					   &param, 0);
212 	CU_ASSERT(rc != 0);
213 	CU_ASSERT(rsph->status_class == ISCSI_CLASS_INITIATOR_ERROR);
214 	CU_ASSERT(rsph->status_detail == ISCSI_LOGIN_MISSING_PARMS);
215 
216 	/* expect failure: NULL target name */
217 	param.key = "TargetName";
218 	param.val = NULL;
219 	rc = iscsi_op_login_session_normal(&conn, &rsp_pdu, UT_INITIATOR_NAME1,
220 					   &param, 0);
221 	CU_ASSERT(rc != 0);
222 	CU_ASSERT(rsph->status_class == ISCSI_CLASS_INITIATOR_ERROR);
223 	CU_ASSERT(rsph->status_detail == ISCSI_LOGIN_MISSING_PARMS);
224 
225 	/* expect failure: session not found */
226 	param.key = "TargetName";
227 	param.val = "iqn.2017-11.spdk.io:t0001";
228 	snprintf(conn.initiator_name, sizeof(conn.initiator_name),
229 		 "%s", UT_INITIATOR_NAME1);
230 	rsph->tsih = 1; /* to append the session */
231 	rc = iscsi_op_login_session_normal(&conn, &rsp_pdu, UT_INITIATOR_NAME1,
232 					   &param, 0);
233 	CU_ASSERT(conn.target_port == NULL);
234 	CU_ASSERT(rc != 0);
235 	CU_ASSERT(rsph->status_class == ISCSI_CLASS_INITIATOR_ERROR);
236 	CU_ASSERT(rsph->status_detail == ISCSI_LOGIN_CONN_ADD_FAIL);
237 
238 	/* expect failure: session found while tag is wrong */
239 	g_iscsi.MaxSessions = UT_ISCSI_TSIH * 2;
240 	g_iscsi.session = calloc(1, sizeof(void *) * g_iscsi.MaxSessions);
241 	g_iscsi.session[UT_ISCSI_TSIH - 1] = &sess;
242 	sess.tsih = UT_ISCSI_TSIH;
243 	rsph->tsih = UT_ISCSI_TSIH >> 8; /* to append the session */
244 	sess.tag = 1;
245 	rc = iscsi_op_login_session_normal(&conn, &rsp_pdu, UT_INITIATOR_NAME1,
246 					   &param, 0);
247 	CU_ASSERT(conn.target_port == NULL);
248 	CU_ASSERT(rc != 0);
249 	CU_ASSERT(rsph->status_class == ISCSI_CLASS_INITIATOR_ERROR);
250 	CU_ASSERT(rsph->status_detail == ISCSI_LOGIN_CONN_ADD_FAIL);
251 
252 	/* expect suceess: drop the session */
253 	rsph->tsih = 0; /* to create the session */
254 	g_iscsi.AllowDuplicateIsid = false;
255 	rc = iscsi_op_login_session_normal(&conn, &rsp_pdu, UT_INITIATOR_NAME1,
256 					   &param, 0);
257 	CU_ASSERT(rc == 0);
258 
259 	/* expect suceess: create the session */
260 	rsph->tsih = 0; /* to create the session */
261 	g_iscsi.AllowDuplicateIsid = true;
262 	rc = iscsi_op_login_session_normal(&conn, &rsp_pdu, UT_INITIATOR_NAME1,
263 					   &param, 0);
264 	CU_ASSERT(rc == 0);
265 
266 	free(g_iscsi.session);
267 }
268 
269 static void
270 maxburstlength_test(void)
271 {
272 	struct spdk_iscsi_sess sess = {};
273 	struct spdk_iscsi_conn conn = {};
274 	struct spdk_scsi_dev dev = {};
275 	struct spdk_scsi_lun lun = {};
276 	struct spdk_iscsi_pdu *req_pdu, *data_out_pdu, *r2t_pdu;
277 	struct iscsi_bhs_scsi_req *req;
278 	struct iscsi_bhs_r2t *r2t;
279 	struct iscsi_bhs_data_out *data_out;
280 	struct spdk_iscsi_pdu *response_pdu;
281 	int rc;
282 
283 	g_iscsi.MaxR2TPerConnection = DEFAULT_MAXR2T;
284 
285 	req_pdu = iscsi_get_pdu(&conn);
286 	data_out_pdu = iscsi_get_pdu(&conn);
287 
288 	sess.ExpCmdSN = 0;
289 	sess.MaxCmdSN = 64;
290 	sess.session_type = SESSION_TYPE_NORMAL;
291 	sess.MaxBurstLength = 1024;
292 
293 	lun.id = 0;
294 
295 	dev.lun[0] = &lun;
296 
297 	conn.full_feature = 1;
298 	conn.sess = &sess;
299 	conn.dev = &dev;
300 	conn.state = ISCSI_CONN_STATE_RUNNING;
301 	TAILQ_INIT(&conn.write_pdu_list);
302 	TAILQ_INIT(&conn.active_r2t_tasks);
303 
304 	req_pdu->bhs.opcode = ISCSI_OP_SCSI;
305 	req_pdu->data_segment_len = 0;
306 
307 	req = (struct iscsi_bhs_scsi_req *)&req_pdu->bhs;
308 
309 	to_be32(&req->cmd_sn, 0);
310 	to_be32(&req->expected_data_xfer_len, 1028);
311 	to_be32(&req->itt, 0x1234);
312 	req->write_bit = 1;
313 	req->final_bit = 1;
314 
315 	rc = iscsi_pdu_hdr_handle(&conn, req_pdu);
316 	if (rc == 0 && !req_pdu->is_rejected) {
317 		rc = iscsi_pdu_payload_handle(&conn, req_pdu);
318 	}
319 	CU_ASSERT(rc == 0);
320 
321 	response_pdu = TAILQ_FIRST(&g_write_pdu_list);
322 	SPDK_CU_ASSERT_FATAL(response_pdu != NULL);
323 
324 	/*
325 	 * Confirm that a correct R2T reply was sent in response to the
326 	 *  SCSI request.
327 	 */
328 	TAILQ_REMOVE(&g_write_pdu_list, response_pdu, tailq);
329 	CU_ASSERT(response_pdu->bhs.opcode == ISCSI_OP_R2T);
330 	r2t = (struct iscsi_bhs_r2t *)&response_pdu->bhs;
331 	CU_ASSERT(from_be32(&r2t->desired_xfer_len) == 1024);
332 	CU_ASSERT(from_be32(&r2t->buffer_offset) == 0);
333 	CU_ASSERT(from_be32(&r2t->itt) == 0x1234);
334 
335 	data_out_pdu->bhs.opcode = ISCSI_OP_SCSI_DATAOUT;
336 	data_out_pdu->bhs.flags = ISCSI_FLAG_FINAL;
337 	data_out_pdu->data_segment_len = 1028;
338 	data_out = (struct iscsi_bhs_data_out *)&data_out_pdu->bhs;
339 	data_out->itt = r2t->itt;
340 	data_out->ttt = r2t->ttt;
341 	DSET24(data_out->data_segment_len, 1028);
342 
343 	rc = iscsi_pdu_hdr_handle(&conn, data_out_pdu);
344 	if (rc == 0 && !data_out_pdu->is_rejected) {
345 		rc = iscsi_pdu_payload_handle(&conn, data_out_pdu);
346 	}
347 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
348 
349 	SPDK_CU_ASSERT_FATAL(response_pdu->task != NULL);
350 	iscsi_task_disassociate_pdu(response_pdu->task);
351 	iscsi_task_put(response_pdu->task);
352 	iscsi_put_pdu(response_pdu);
353 
354 	r2t_pdu = TAILQ_FIRST(&g_write_pdu_list);
355 	CU_ASSERT(r2t_pdu != NULL);
356 	TAILQ_REMOVE(&g_write_pdu_list, r2t_pdu, tailq);
357 	iscsi_put_pdu(r2t_pdu);
358 
359 	iscsi_put_pdu(data_out_pdu);
360 	iscsi_put_pdu(req_pdu);
361 }
362 
363 static void
364 underflow_for_read_transfer_test(void)
365 {
366 	struct spdk_iscsi_sess sess = {};
367 	struct spdk_iscsi_conn conn = {};
368 	struct spdk_iscsi_task task = {};
369 	struct spdk_scsi_dev dev = {};
370 	struct spdk_scsi_lun lun = {};
371 	struct spdk_iscsi_pdu *pdu;
372 	struct iscsi_bhs_scsi_req *scsi_req;
373 	struct iscsi_bhs_data_in *datah;
374 	uint32_t residual_count = 0;
375 
376 	sess.MaxBurstLength = SPDK_ISCSI_MAX_BURST_LENGTH;
377 
378 	conn.sess = &sess;
379 	conn.MaxRecvDataSegmentLength = 8192;
380 
381 	dev.lun[0] = &lun;
382 	conn.dev = &dev;
383 
384 	pdu = iscsi_get_pdu(&conn);
385 	SPDK_CU_ASSERT_FATAL(pdu != NULL);
386 
387 	scsi_req = (struct iscsi_bhs_scsi_req *)&pdu->bhs;
388 	scsi_req->read_bit = 1;
389 
390 	iscsi_task_set_pdu(&task, pdu);
391 	task.parent = NULL;
392 
393 	task.scsi.iovs = &task.scsi.iov;
394 	task.scsi.iovcnt = 1;
395 	task.scsi.length = 512;
396 	task.scsi.transfer_len = 512;
397 	task.bytes_completed = 512;
398 	task.scsi.data_transferred = 256;
399 	task.scsi.status = SPDK_SCSI_STATUS_GOOD;
400 
401 	iscsi_task_response(&conn, &task);
402 	iscsi_put_pdu(pdu);
403 
404 	/*
405 	 * In this case, a SCSI Data-In PDU should contain the Status
406 	 * for the data transfer.
407 	 */
408 	to_be32(&residual_count, 256);
409 
410 	pdu = TAILQ_FIRST(&g_write_pdu_list);
411 	SPDK_CU_ASSERT_FATAL(pdu != NULL);
412 
413 	CU_ASSERT(pdu->bhs.opcode == ISCSI_OP_SCSI_DATAIN);
414 
415 	datah = (struct iscsi_bhs_data_in *)&pdu->bhs;
416 
417 	CU_ASSERT(datah->flags == (ISCSI_DATAIN_UNDERFLOW | ISCSI_FLAG_FINAL | ISCSI_DATAIN_STATUS));
418 	CU_ASSERT(datah->res_cnt == residual_count);
419 
420 	TAILQ_REMOVE(&g_write_pdu_list, pdu, tailq);
421 	iscsi_put_pdu(pdu);
422 
423 	CU_ASSERT(TAILQ_EMPTY(&g_write_pdu_list));
424 }
425 
426 static void
427 underflow_for_zero_read_transfer_test(void)
428 {
429 	struct spdk_iscsi_sess sess = {};
430 	struct spdk_iscsi_conn conn = {};
431 	struct spdk_iscsi_task task = {};
432 	struct spdk_scsi_dev dev = {};
433 	struct spdk_scsi_lun lun = {};
434 	struct spdk_iscsi_pdu *pdu;
435 	struct iscsi_bhs_scsi_req *scsi_req;
436 	struct iscsi_bhs_scsi_resp *resph;
437 	uint32_t residual_count = 0, data_segment_len;
438 
439 	sess.MaxBurstLength = SPDK_ISCSI_MAX_BURST_LENGTH;
440 
441 	conn.sess = &sess;
442 	conn.MaxRecvDataSegmentLength = 8192;
443 
444 	dev.lun[0] = &lun;
445 	conn.dev = &dev;
446 
447 	pdu = iscsi_get_pdu(&conn);
448 	SPDK_CU_ASSERT_FATAL(pdu != NULL);
449 
450 	scsi_req = (struct iscsi_bhs_scsi_req *)&pdu->bhs;
451 	scsi_req->read_bit = 1;
452 
453 	iscsi_task_set_pdu(&task, pdu);
454 	task.parent = NULL;
455 
456 	task.scsi.length = 512;
457 	task.scsi.transfer_len = 512;
458 	task.bytes_completed = 512;
459 	task.scsi.data_transferred = 0;
460 	task.scsi.status = SPDK_SCSI_STATUS_GOOD;
461 
462 	iscsi_task_response(&conn, &task);
463 	iscsi_put_pdu(pdu);
464 
465 	/*
466 	 * In this case, only a SCSI Response PDU is expected and
467 	 * underflow must be set in it.
468 	 * */
469 	to_be32(&residual_count, 512);
470 
471 	pdu = TAILQ_FIRST(&g_write_pdu_list);
472 	SPDK_CU_ASSERT_FATAL(pdu != NULL);
473 
474 	CU_ASSERT(pdu->bhs.opcode == ISCSI_OP_SCSI_RSP);
475 
476 	resph = (struct iscsi_bhs_scsi_resp *)&pdu->bhs;
477 
478 	CU_ASSERT(resph->flags == (ISCSI_SCSI_UNDERFLOW | 0x80));
479 
480 	data_segment_len = DGET24(resph->data_segment_len);
481 	CU_ASSERT(data_segment_len == 0);
482 	CU_ASSERT(resph->res_cnt == residual_count);
483 
484 	TAILQ_REMOVE(&g_write_pdu_list, pdu, tailq);
485 	iscsi_put_pdu(pdu);
486 
487 	CU_ASSERT(TAILQ_EMPTY(&g_write_pdu_list));
488 }
489 
490 static void
491 underflow_for_request_sense_test(void)
492 {
493 	struct spdk_iscsi_sess sess = {};
494 	struct spdk_iscsi_conn conn = {};
495 	struct spdk_iscsi_task task = {};
496 	struct spdk_scsi_dev dev = {};
497 	struct spdk_scsi_lun lun = {};
498 	struct spdk_iscsi_pdu *pdu1, *pdu2;
499 	struct iscsi_bhs_scsi_req *scsi_req;
500 	struct iscsi_bhs_data_in *datah;
501 	struct iscsi_bhs_scsi_resp *resph;
502 	uint32_t residual_count = 0, data_segment_len;
503 
504 	sess.MaxBurstLength = SPDK_ISCSI_MAX_BURST_LENGTH;
505 
506 	conn.sess = &sess;
507 	conn.MaxRecvDataSegmentLength = 8192;
508 
509 	dev.lun[0] = &lun;
510 	conn.dev = &dev;
511 
512 	pdu1 = iscsi_get_pdu(&conn);
513 	SPDK_CU_ASSERT_FATAL(pdu1 != NULL);
514 
515 	scsi_req = (struct iscsi_bhs_scsi_req *)&pdu1->bhs;
516 	scsi_req->read_bit = 1;
517 
518 	iscsi_task_set_pdu(&task, pdu1);
519 	task.parent = NULL;
520 
521 	task.scsi.iovs = &task.scsi.iov;
522 	task.scsi.iovcnt = 1;
523 	task.scsi.length = 512;
524 	task.scsi.transfer_len = 512;
525 	task.bytes_completed = 512;
526 
527 	task.scsi.sense_data_len = 18;
528 	task.scsi.data_transferred = 18;
529 	task.scsi.status = SPDK_SCSI_STATUS_GOOD;
530 
531 	iscsi_task_response(&conn, &task);
532 	iscsi_put_pdu(pdu1);
533 
534 	/*
535 	 * In this case, a SCSI Data-In PDU and a SCSI Response PDU are returned.
536 	 * Sense data are set both in payload and sense area.
537 	 * The SCSI Data-In PDU sets FINAL and the SCSI Response PDU sets UNDERFLOW.
538 	 *
539 	 * Probably there will be different implementation but keeping current SPDK
540 	 * implementation by adding UT will be valuable for any implementation.
541 	 */
542 	to_be32(&residual_count, 494);
543 
544 	pdu1 = TAILQ_FIRST(&g_write_pdu_list);
545 	SPDK_CU_ASSERT_FATAL(pdu1 != NULL);
546 
547 	CU_ASSERT(pdu1->bhs.opcode == ISCSI_OP_SCSI_DATAIN);
548 
549 	datah = (struct iscsi_bhs_data_in *)&pdu1->bhs;
550 
551 	CU_ASSERT(datah->flags == ISCSI_FLAG_FINAL);
552 
553 	data_segment_len = DGET24(datah->data_segment_len);
554 	CU_ASSERT(data_segment_len == 18);
555 	CU_ASSERT(datah->res_cnt == 0);
556 
557 	TAILQ_REMOVE(&g_write_pdu_list, pdu1, tailq);
558 	iscsi_put_pdu(pdu1);
559 
560 	pdu2 = TAILQ_FIRST(&g_write_pdu_list);
561 	/* inform scan-build (clang 6) that these pointers are not the same */
562 	SPDK_CU_ASSERT_FATAL(pdu1 != pdu2);
563 	SPDK_CU_ASSERT_FATAL(pdu2 != NULL);
564 
565 	CU_ASSERT(pdu2->bhs.opcode == ISCSI_OP_SCSI_RSP);
566 
567 	resph = (struct iscsi_bhs_scsi_resp *)&pdu2->bhs;
568 
569 	CU_ASSERT(resph->flags == (ISCSI_SCSI_UNDERFLOW | 0x80));
570 
571 	data_segment_len = DGET24(resph->data_segment_len);
572 	CU_ASSERT(data_segment_len == task.scsi.sense_data_len + 2);
573 	CU_ASSERT(resph->res_cnt == residual_count);
574 
575 	TAILQ_REMOVE(&g_write_pdu_list, pdu2, tailq);
576 	iscsi_put_pdu(pdu2);
577 
578 	CU_ASSERT(TAILQ_EMPTY(&g_write_pdu_list));
579 }
580 
581 static void
582 underflow_for_check_condition_test(void)
583 {
584 	struct spdk_iscsi_sess sess = {};
585 	struct spdk_iscsi_conn conn = {};
586 	struct spdk_iscsi_task task = {};
587 	struct spdk_scsi_dev dev = {};
588 	struct spdk_scsi_lun lun = {};
589 	struct spdk_iscsi_pdu *pdu;
590 	struct iscsi_bhs_scsi_req *scsi_req;
591 	struct iscsi_bhs_scsi_resp *resph;
592 	uint32_t data_segment_len;
593 
594 	sess.MaxBurstLength = SPDK_ISCSI_MAX_BURST_LENGTH;
595 
596 	conn.sess = &sess;
597 	conn.MaxRecvDataSegmentLength = 8192;
598 
599 	dev.lun[0] = &lun;
600 	conn.dev = &dev;
601 
602 	pdu = iscsi_get_pdu(&conn);
603 	SPDK_CU_ASSERT_FATAL(pdu != NULL);
604 
605 	scsi_req = (struct iscsi_bhs_scsi_req *)&pdu->bhs;
606 	scsi_req->read_bit = 1;
607 
608 	iscsi_task_set_pdu(&task, pdu);
609 	task.parent = NULL;
610 
611 	task.scsi.iovs = &task.scsi.iov;
612 	task.scsi.iovcnt = 1;
613 	task.scsi.length = 512;
614 	task.scsi.transfer_len = 512;
615 	task.bytes_completed = 512;
616 
617 	task.scsi.sense_data_len = 18;
618 	task.scsi.data_transferred = 18;
619 	task.scsi.status = SPDK_SCSI_STATUS_CHECK_CONDITION;
620 
621 	iscsi_task_response(&conn, &task);
622 	iscsi_put_pdu(pdu);
623 
624 	/*
625 	 * In this case, a SCSI Response PDU is returned.
626 	 * Sense data is set in sense area.
627 	 * Underflow is not set.
628 	 */
629 	pdu = TAILQ_FIRST(&g_write_pdu_list);
630 	SPDK_CU_ASSERT_FATAL(pdu != NULL);
631 
632 	CU_ASSERT(pdu->bhs.opcode == ISCSI_OP_SCSI_RSP);
633 
634 	resph = (struct iscsi_bhs_scsi_resp *)&pdu->bhs;
635 
636 	CU_ASSERT(resph->flags == 0x80);
637 
638 	data_segment_len = DGET24(resph->data_segment_len);
639 	CU_ASSERT(data_segment_len == task.scsi.sense_data_len + 2);
640 	CU_ASSERT(resph->res_cnt == 0);
641 
642 	TAILQ_REMOVE(&g_write_pdu_list, pdu, tailq);
643 	iscsi_put_pdu(pdu);
644 
645 	CU_ASSERT(TAILQ_EMPTY(&g_write_pdu_list));
646 }
647 
648 static void
649 add_transfer_task_test(void)
650 {
651 	struct spdk_iscsi_sess sess = {};
652 	struct spdk_iscsi_conn conn = {};
653 	struct spdk_iscsi_task task = {};
654 	struct spdk_iscsi_pdu *pdu, *tmp;
655 	struct iscsi_bhs_r2t *r2th;
656 	int rc, count = 0;
657 	uint32_t buffer_offset, desired_xfer_len;
658 
659 	g_iscsi.MaxR2TPerConnection = DEFAULT_MAXR2T;
660 
661 	sess.MaxBurstLength = SPDK_ISCSI_MAX_BURST_LENGTH;	/* 1M */
662 	sess.MaxOutstandingR2T = DEFAULT_MAXR2T;	/* 4 */
663 
664 	conn.sess = &sess;
665 	TAILQ_INIT(&conn.queued_r2t_tasks);
666 	TAILQ_INIT(&conn.active_r2t_tasks);
667 
668 	pdu = iscsi_get_pdu(&conn);
669 	SPDK_CU_ASSERT_FATAL(pdu != NULL);
670 
671 	pdu->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;	/* 64K */
672 	task.scsi.transfer_len = 16 * 1024 * 1024;
673 	iscsi_task_set_pdu(&task, pdu);
674 
675 	/* The following tests if the task is queued because R2T tasks are full. */
676 	conn.pending_r2t = DEFAULT_MAXR2T;
677 
678 	rc = add_transfer_task(&conn, &task);
679 
680 	CU_ASSERT(rc == 0);
681 	CU_ASSERT(TAILQ_FIRST(&conn.queued_r2t_tasks) == &task);
682 
683 	TAILQ_REMOVE(&conn.queued_r2t_tasks, &task, link);
684 	CU_ASSERT(TAILQ_EMPTY(&conn.queued_r2t_tasks));
685 
686 	/* The following tests if multiple R2Ts are issued. */
687 	conn.pending_r2t = 0;
688 
689 	rc = add_transfer_task(&conn, &task);
690 
691 	CU_ASSERT(rc == 0);
692 	CU_ASSERT(TAILQ_FIRST(&conn.active_r2t_tasks) == &task);
693 
694 	TAILQ_REMOVE(&conn.active_r2t_tasks, &task, link);
695 	CU_ASSERT(TAILQ_EMPTY(&conn.active_r2t_tasks));
696 
697 	CU_ASSERT(conn.data_out_cnt == 255);
698 	CU_ASSERT(conn.pending_r2t == 1);
699 	CU_ASSERT(conn.ttt == 1);
700 
701 	CU_ASSERT(task.data_out_cnt == 255);
702 	CU_ASSERT(task.ttt == 1);
703 	CU_ASSERT(task.outstanding_r2t == sess.MaxOutstandingR2T);
704 	CU_ASSERT(task.next_r2t_offset ==
705 		  pdu->data_segment_len + sess.MaxBurstLength * sess.MaxOutstandingR2T);
706 
707 
708 	while (!TAILQ_EMPTY(&g_write_pdu_list)) {
709 		tmp = TAILQ_FIRST(&g_write_pdu_list);
710 		TAILQ_REMOVE(&g_write_pdu_list, tmp, tailq);
711 
712 		r2th = (struct iscsi_bhs_r2t *)&tmp->bhs;
713 
714 		buffer_offset = from_be32(&r2th->buffer_offset);
715 		CU_ASSERT(buffer_offset == pdu->data_segment_len + sess.MaxBurstLength * count);
716 
717 		desired_xfer_len = from_be32(&r2th->desired_xfer_len);
718 		CU_ASSERT(desired_xfer_len == sess.MaxBurstLength);
719 
720 		iscsi_put_pdu(tmp);
721 		count++;
722 	}
723 
724 	CU_ASSERT(count == DEFAULT_MAXR2T);
725 
726 	iscsi_put_pdu(pdu);
727 }
728 
729 static void
730 get_transfer_task_test(void)
731 {
732 	struct spdk_iscsi_sess sess = {};
733 	struct spdk_iscsi_conn conn = {};
734 	struct spdk_iscsi_task task1 = {}, task2 = {}, *task;
735 	struct spdk_iscsi_pdu *pdu1, *pdu2, *pdu;
736 	int rc;
737 
738 	sess.MaxBurstLength = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
739 	sess.MaxOutstandingR2T = 1;
740 
741 	conn.sess = &sess;
742 	TAILQ_INIT(&conn.active_r2t_tasks);
743 
744 	pdu1 = iscsi_get_pdu(&conn);
745 	SPDK_CU_ASSERT_FATAL(pdu1 != NULL);
746 
747 	pdu1->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
748 	task1.scsi.transfer_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
749 	iscsi_task_set_pdu(&task1, pdu1);
750 
751 	rc = add_transfer_task(&conn, &task1);
752 	CU_ASSERT(rc == 0);
753 
754 	pdu2 = iscsi_get_pdu(&conn);
755 	SPDK_CU_ASSERT_FATAL(pdu2 != NULL);
756 
757 	pdu2->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
758 	task2.scsi.transfer_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
759 	iscsi_task_set_pdu(&task2, pdu2);
760 
761 	rc = add_transfer_task(&conn, &task2);
762 	CU_ASSERT(rc == 0);
763 
764 	task = get_transfer_task(&conn, 1);
765 	CU_ASSERT(task == &task1);
766 
767 	task = get_transfer_task(&conn, 2);
768 	CU_ASSERT(task == &task2);
769 
770 	while (!TAILQ_EMPTY(&conn.active_r2t_tasks)) {
771 		task = TAILQ_FIRST(&conn.active_r2t_tasks);
772 		TAILQ_REMOVE(&conn.active_r2t_tasks, task, link);
773 	}
774 
775 	while (!TAILQ_EMPTY(&g_write_pdu_list)) {
776 		pdu = TAILQ_FIRST(&g_write_pdu_list);
777 		TAILQ_REMOVE(&g_write_pdu_list, pdu, tailq);
778 		iscsi_put_pdu(pdu);
779 	}
780 
781 	iscsi_put_pdu(pdu2);
782 	iscsi_put_pdu(pdu1);
783 }
784 
785 static void
786 del_transfer_task_test(void)
787 {
788 	struct spdk_iscsi_sess sess = {};
789 	struct spdk_iscsi_conn conn = {};
790 	struct spdk_iscsi_task *task1, *task2, *task3, *task4, *task5;
791 	struct spdk_iscsi_pdu *pdu1, *pdu2, *pdu3, *pdu4, *pdu5, *pdu;
792 	int rc;
793 
794 	sess.MaxBurstLength = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
795 	sess.MaxOutstandingR2T = 1;
796 
797 	conn.sess = &sess;
798 	TAILQ_INIT(&conn.active_r2t_tasks);
799 	TAILQ_INIT(&conn.queued_r2t_tasks);
800 
801 	pdu1 = iscsi_get_pdu(&conn);
802 	SPDK_CU_ASSERT_FATAL(pdu1 != NULL);
803 
804 	pdu1->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
805 
806 	task1 = iscsi_task_get(&conn, NULL, NULL);
807 	SPDK_CU_ASSERT_FATAL(task1 != NULL);
808 
809 	task1->scsi.transfer_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
810 	iscsi_task_set_pdu(task1, pdu1);
811 	task1->tag = 11;
812 
813 	rc = add_transfer_task(&conn, task1);
814 	CU_ASSERT(rc == 0);
815 
816 	pdu2 = iscsi_get_pdu(&conn);
817 	SPDK_CU_ASSERT_FATAL(pdu2 != NULL);
818 
819 	pdu2->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
820 
821 	task2 = iscsi_task_get(&conn, NULL, NULL);
822 	SPDK_CU_ASSERT_FATAL(task2 != NULL);
823 
824 	task2->scsi.transfer_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
825 	iscsi_task_set_pdu(task2, pdu2);
826 	task2->tag = 12;
827 
828 	rc = add_transfer_task(&conn, task2);
829 	CU_ASSERT(rc == 0);
830 
831 	pdu3 = iscsi_get_pdu(&conn);
832 	SPDK_CU_ASSERT_FATAL(pdu3 != NULL);
833 
834 	pdu3->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
835 
836 	task3 = iscsi_task_get(&conn, NULL, NULL);
837 	SPDK_CU_ASSERT_FATAL(task3 != NULL);
838 
839 	task3->scsi.transfer_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
840 	iscsi_task_set_pdu(task3, pdu3);
841 	task3->tag = 13;
842 
843 	rc = add_transfer_task(&conn, task3);
844 	CU_ASSERT(rc == 0);
845 
846 	pdu4 = iscsi_get_pdu(&conn);
847 	SPDK_CU_ASSERT_FATAL(pdu4 != NULL);
848 
849 	pdu4->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
850 
851 	task4 = iscsi_task_get(&conn, NULL, NULL);
852 	SPDK_CU_ASSERT_FATAL(task4 != NULL);
853 
854 	task4->scsi.transfer_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
855 	iscsi_task_set_pdu(task4, pdu4);
856 	task4->tag = 14;
857 
858 	rc = add_transfer_task(&conn, task4);
859 	CU_ASSERT(rc == 0);
860 
861 	pdu5 = iscsi_get_pdu(&conn);
862 	SPDK_CU_ASSERT_FATAL(pdu5 != NULL);
863 
864 	pdu5->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
865 
866 	task5 = iscsi_task_get(&conn, NULL, NULL);
867 	SPDK_CU_ASSERT_FATAL(task5 != NULL);
868 
869 	task5->scsi.transfer_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
870 	iscsi_task_set_pdu(task5, pdu5);
871 	task5->tag = 15;
872 
873 	rc = add_transfer_task(&conn, task5);
874 	CU_ASSERT(rc == 0);
875 
876 	CU_ASSERT(get_transfer_task(&conn, 1) == task1);
877 	CU_ASSERT(get_transfer_task(&conn, 5) == NULL);
878 	iscsi_del_transfer_task(&conn, 11);
879 	CU_ASSERT(get_transfer_task(&conn, 1) == NULL);
880 	CU_ASSERT(get_transfer_task(&conn, 5) == task5);
881 
882 	CU_ASSERT(get_transfer_task(&conn, 2) == task2);
883 	iscsi_del_transfer_task(&conn, 12);
884 	CU_ASSERT(get_transfer_task(&conn, 2) == NULL);
885 
886 	CU_ASSERT(get_transfer_task(&conn, 3) == task3);
887 	iscsi_del_transfer_task(&conn, 13);
888 	CU_ASSERT(get_transfer_task(&conn, 3) == NULL);
889 
890 	CU_ASSERT(get_transfer_task(&conn, 4) == task4);
891 	iscsi_del_transfer_task(&conn, 14);
892 	CU_ASSERT(get_transfer_task(&conn, 4) == NULL);
893 
894 	CU_ASSERT(get_transfer_task(&conn, 5) == task5);
895 	iscsi_del_transfer_task(&conn, 15);
896 	CU_ASSERT(get_transfer_task(&conn, 5) == NULL);
897 
898 	CU_ASSERT(TAILQ_EMPTY(&conn.active_r2t_tasks));
899 
900 	while (!TAILQ_EMPTY(&g_write_pdu_list)) {
901 		pdu = TAILQ_FIRST(&g_write_pdu_list);
902 		TAILQ_REMOVE(&g_write_pdu_list, pdu, tailq);
903 		iscsi_put_pdu(pdu);
904 	}
905 
906 	iscsi_put_pdu(pdu5);
907 	iscsi_put_pdu(pdu4);
908 	iscsi_put_pdu(pdu3);
909 	iscsi_put_pdu(pdu2);
910 	iscsi_put_pdu(pdu1);
911 }
912 
913 static void
914 clear_all_transfer_tasks_test(void)
915 {
916 	struct spdk_iscsi_sess sess = {};
917 	struct spdk_iscsi_conn conn = {};
918 	struct spdk_iscsi_task *task1, *task2, *task3, *task4, *task5, *task6;
919 	struct spdk_iscsi_pdu *pdu1, *pdu2, *pdu3, *pdu4, *pdu5, *pdu6, *pdu;
920 	struct spdk_iscsi_pdu *mgmt_pdu1, *mgmt_pdu2;
921 	struct spdk_scsi_lun lun1 = {}, lun2 = {};
922 	uint32_t alloc_cmd_sn;
923 	int rc;
924 
925 	sess.MaxBurstLength = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
926 	sess.MaxOutstandingR2T = 1;
927 
928 	conn.sess = &sess;
929 	TAILQ_INIT(&conn.active_r2t_tasks);
930 	TAILQ_INIT(&conn.queued_r2t_tasks);
931 
932 	alloc_cmd_sn = 10;
933 
934 	task1 = iscsi_task_get(&conn, NULL, NULL);
935 	SPDK_CU_ASSERT_FATAL(task1 != NULL);
936 	pdu1 = iscsi_get_pdu(&conn);
937 	SPDK_CU_ASSERT_FATAL(pdu1 != NULL);
938 
939 	pdu1->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
940 	pdu1->cmd_sn = alloc_cmd_sn;
941 	alloc_cmd_sn++;
942 	task1->scsi.transfer_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
943 	task1->scsi.lun = &lun1;
944 	iscsi_task_set_pdu(task1, pdu1);
945 
946 	rc = add_transfer_task(&conn, task1);
947 	CU_ASSERT(rc == 0);
948 
949 	mgmt_pdu1 = iscsi_get_pdu(&conn);
950 	SPDK_CU_ASSERT_FATAL(mgmt_pdu1 != NULL);
951 
952 	mgmt_pdu1->cmd_sn = alloc_cmd_sn;
953 	alloc_cmd_sn++;
954 
955 	task2 = iscsi_task_get(&conn, NULL, NULL);
956 	SPDK_CU_ASSERT_FATAL(task2 != NULL);
957 	pdu2 = iscsi_get_pdu(&conn);
958 	SPDK_CU_ASSERT_FATAL(pdu2 != NULL);
959 
960 	pdu2->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
961 	pdu2->cmd_sn = alloc_cmd_sn;
962 	alloc_cmd_sn++;
963 	task2->scsi.transfer_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
964 	task2->scsi.lun = &lun1;
965 	iscsi_task_set_pdu(task2, pdu2);
966 
967 	rc = add_transfer_task(&conn, task2);
968 	CU_ASSERT(rc == 0);
969 
970 	task3 = iscsi_task_get(&conn, NULL, NULL);
971 	SPDK_CU_ASSERT_FATAL(task3 != NULL);
972 	pdu3 = iscsi_get_pdu(&conn);
973 	SPDK_CU_ASSERT_FATAL(pdu3 != NULL);
974 
975 	pdu3->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
976 	pdu3->cmd_sn = alloc_cmd_sn;
977 	alloc_cmd_sn++;
978 	task3->scsi.transfer_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
979 	task3->scsi.lun = &lun1;
980 	iscsi_task_set_pdu(task3, pdu3);
981 
982 	rc = add_transfer_task(&conn, task3);
983 	CU_ASSERT(rc == 0);
984 
985 	task4 = iscsi_task_get(&conn, NULL, NULL);
986 	SPDK_CU_ASSERT_FATAL(task4 != NULL);
987 	pdu4 = iscsi_get_pdu(&conn);
988 	SPDK_CU_ASSERT_FATAL(pdu4 != NULL);
989 
990 	pdu4->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
991 	pdu4->cmd_sn = alloc_cmd_sn;
992 	alloc_cmd_sn++;
993 	task4->scsi.transfer_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
994 	task4->scsi.lun = &lun2;
995 	iscsi_task_set_pdu(task4, pdu4);
996 
997 	rc = add_transfer_task(&conn, task4);
998 	CU_ASSERT(rc == 0);
999 
1000 	task5 = iscsi_task_get(&conn, NULL, NULL);
1001 	SPDK_CU_ASSERT_FATAL(task5 != NULL);
1002 	pdu5 = iscsi_get_pdu(&conn);
1003 	SPDK_CU_ASSERT_FATAL(pdu5 != NULL);
1004 
1005 	pdu5->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
1006 	pdu5->cmd_sn = alloc_cmd_sn;
1007 	alloc_cmd_sn++;
1008 	task5->scsi.transfer_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
1009 	task5->scsi.lun = &lun2;
1010 	iscsi_task_set_pdu(task5, pdu5);
1011 
1012 	rc = add_transfer_task(&conn, task5);
1013 	CU_ASSERT(rc == 0);
1014 
1015 	mgmt_pdu2 = iscsi_get_pdu(&conn);
1016 	SPDK_CU_ASSERT_FATAL(mgmt_pdu2 != NULL);
1017 
1018 	mgmt_pdu2->cmd_sn = alloc_cmd_sn;
1019 	alloc_cmd_sn++;
1020 
1021 	task6 = iscsi_task_get(&conn, NULL, NULL);
1022 	SPDK_CU_ASSERT_FATAL(task6 != NULL);
1023 	pdu6 = iscsi_get_pdu(&conn);
1024 	SPDK_CU_ASSERT_FATAL(pdu6 != NULL);
1025 
1026 	pdu6->data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
1027 	pdu6->cmd_sn = alloc_cmd_sn;
1028 	alloc_cmd_sn++;
1029 	task5->scsi.transfer_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
1030 	task6->scsi.lun = &lun2;
1031 	iscsi_task_set_pdu(task6, pdu6);
1032 
1033 	rc = add_transfer_task(&conn, task6);
1034 	CU_ASSERT(rc == 0);
1035 
1036 	CU_ASSERT(conn.ttt == 4);
1037 
1038 	CU_ASSERT(get_transfer_task(&conn, 1) == task1);
1039 	CU_ASSERT(get_transfer_task(&conn, 2) == task2);
1040 	CU_ASSERT(get_transfer_task(&conn, 3) == task3);
1041 	CU_ASSERT(get_transfer_task(&conn, 4) == task4);
1042 	CU_ASSERT(get_transfer_task(&conn, 5) == NULL);
1043 
1044 	iscsi_clear_all_transfer_task(&conn, &lun1, mgmt_pdu1);
1045 
1046 	CU_ASSERT(!TAILQ_EMPTY(&conn.queued_r2t_tasks));
1047 	CU_ASSERT(get_transfer_task(&conn, 1) == NULL);
1048 	CU_ASSERT(get_transfer_task(&conn, 2) == task2);
1049 	CU_ASSERT(get_transfer_task(&conn, 3) == task3);
1050 	CU_ASSERT(get_transfer_task(&conn, 4) == task4);
1051 	CU_ASSERT(get_transfer_task(&conn, 5) == task5);
1052 	CU_ASSERT(get_transfer_task(&conn, 6) == NULL);
1053 
1054 	iscsi_clear_all_transfer_task(&conn, &lun1, NULL);
1055 
1056 	CU_ASSERT(TAILQ_EMPTY(&conn.queued_r2t_tasks));
1057 	CU_ASSERT(get_transfer_task(&conn, 1) == NULL);
1058 	CU_ASSERT(get_transfer_task(&conn, 2) == NULL);
1059 	CU_ASSERT(get_transfer_task(&conn, 3) == NULL);
1060 	CU_ASSERT(get_transfer_task(&conn, 4) == task4);
1061 	CU_ASSERT(get_transfer_task(&conn, 5) == task5);
1062 	CU_ASSERT(get_transfer_task(&conn, 6) == task6);
1063 
1064 	iscsi_clear_all_transfer_task(&conn, &lun2, mgmt_pdu2);
1065 
1066 	CU_ASSERT(get_transfer_task(&conn, 4) == NULL);
1067 	CU_ASSERT(get_transfer_task(&conn, 5) == NULL);
1068 	CU_ASSERT(get_transfer_task(&conn, 6) == task6);
1069 
1070 	iscsi_clear_all_transfer_task(&conn, NULL, NULL);
1071 
1072 	CU_ASSERT(get_transfer_task(&conn, 6) == NULL);
1073 
1074 	CU_ASSERT(TAILQ_EMPTY(&conn.active_r2t_tasks));
1075 	while (!TAILQ_EMPTY(&g_write_pdu_list)) {
1076 		pdu = TAILQ_FIRST(&g_write_pdu_list);
1077 		TAILQ_REMOVE(&g_write_pdu_list, pdu, tailq);
1078 		iscsi_put_pdu(pdu);
1079 	}
1080 
1081 	iscsi_put_pdu(mgmt_pdu2);
1082 	iscsi_put_pdu(mgmt_pdu1);
1083 	iscsi_put_pdu(pdu6);
1084 	iscsi_put_pdu(pdu5);
1085 	iscsi_put_pdu(pdu4);
1086 	iscsi_put_pdu(pdu3);
1087 	iscsi_put_pdu(pdu2);
1088 	iscsi_put_pdu(pdu1);
1089 }
1090 
1091 static void
1092 build_iovs_test(void)
1093 {
1094 	struct spdk_iscsi_conn conn = {};
1095 	struct spdk_iscsi_pdu pdu = {};
1096 	struct iovec iovs[5] = {};
1097 	uint8_t *data;
1098 	uint32_t mapped_length = 0;
1099 	int rc;
1100 
1101 	conn.header_digest = true;
1102 	conn.data_digest = true;
1103 
1104 	DSET24(&pdu.bhs.data_segment_len, 512);
1105 	data = calloc(1, 512);
1106 	SPDK_CU_ASSERT_FATAL(data != NULL);
1107 	pdu.data = data;
1108 
1109 	pdu.bhs.total_ahs_len = 0;
1110 	pdu.bhs.opcode = ISCSI_OP_SCSI;
1111 
1112 	pdu.writev_offset = 0;
1113 	rc = iscsi_build_iovs(&conn, iovs, 5, &pdu, &mapped_length);
1114 	CU_ASSERT(rc == 4);
1115 	CU_ASSERT(iovs[0].iov_base == (void *)&pdu.bhs);
1116 	CU_ASSERT(iovs[0].iov_len == ISCSI_BHS_LEN);
1117 	CU_ASSERT(iovs[1].iov_base == (void *)pdu.header_digest);
1118 	CU_ASSERT(iovs[1].iov_len == ISCSI_DIGEST_LEN);
1119 	CU_ASSERT(iovs[2].iov_base == (void *)pdu.data);
1120 	CU_ASSERT(iovs[2].iov_len == 512);
1121 	CU_ASSERT(iovs[3].iov_base == (void *)pdu.data_digest);
1122 	CU_ASSERT(iovs[3].iov_len == ISCSI_DIGEST_LEN);
1123 	CU_ASSERT(mapped_length == ISCSI_BHS_LEN + ISCSI_DIGEST_LEN + 512 + ISCSI_DIGEST_LEN);
1124 
1125 	pdu.writev_offset = ISCSI_BHS_LEN / 2;
1126 	rc = iscsi_build_iovs(&conn, iovs, 5, &pdu, &mapped_length);
1127 	CU_ASSERT(rc == 4);
1128 	CU_ASSERT(iovs[0].iov_base == (void *)((uint8_t *)&pdu.bhs + ISCSI_BHS_LEN / 2));
1129 	CU_ASSERT(iovs[0].iov_len == ISCSI_BHS_LEN / 2);
1130 	CU_ASSERT(iovs[1].iov_base == (void *)pdu.header_digest);
1131 	CU_ASSERT(iovs[1].iov_len == ISCSI_DIGEST_LEN);
1132 	CU_ASSERT(iovs[2].iov_base == (void *)pdu.data);
1133 	CU_ASSERT(iovs[2].iov_len == 512);
1134 	CU_ASSERT(iovs[3].iov_base == (void *)pdu.data_digest);
1135 	CU_ASSERT(iovs[3].iov_len == ISCSI_DIGEST_LEN);
1136 	CU_ASSERT(mapped_length == ISCSI_BHS_LEN / 2 + ISCSI_DIGEST_LEN + 512 + ISCSI_DIGEST_LEN);
1137 
1138 	pdu.writev_offset = ISCSI_BHS_LEN;
1139 	rc = iscsi_build_iovs(&conn, iovs, 5, &pdu, &mapped_length);
1140 	CU_ASSERT(rc == 3);
1141 	CU_ASSERT(iovs[0].iov_base == (void *)pdu.header_digest);
1142 	CU_ASSERT(iovs[0].iov_len == ISCSI_DIGEST_LEN);
1143 	CU_ASSERT(iovs[1].iov_base == (void *)pdu.data);
1144 	CU_ASSERT(iovs[1].iov_len == 512);
1145 	CU_ASSERT(iovs[2].iov_base == (void *)pdu.data_digest);
1146 	CU_ASSERT(iovs[2].iov_len == ISCSI_DIGEST_LEN);
1147 	CU_ASSERT(mapped_length == ISCSI_DIGEST_LEN + 512 + ISCSI_DIGEST_LEN);
1148 
1149 	pdu.writev_offset = ISCSI_BHS_LEN + ISCSI_DIGEST_LEN / 2;
1150 	rc = iscsi_build_iovs(&conn, iovs, 5, &pdu, &mapped_length);
1151 	CU_ASSERT(rc == 3);
1152 	CU_ASSERT(iovs[0].iov_base == (void *)((uint8_t *)pdu.header_digest + ISCSI_DIGEST_LEN / 2));
1153 	CU_ASSERT(iovs[0].iov_len == ISCSI_DIGEST_LEN / 2);
1154 	CU_ASSERT(iovs[1].iov_base == (void *)pdu.data);
1155 	CU_ASSERT(iovs[1].iov_len == 512);
1156 	CU_ASSERT(iovs[2].iov_base == (void *)pdu.data_digest);
1157 	CU_ASSERT(iovs[2].iov_len == ISCSI_DIGEST_LEN);
1158 	CU_ASSERT(mapped_length == ISCSI_DIGEST_LEN / 2 + 512 + ISCSI_DIGEST_LEN);
1159 
1160 	pdu.writev_offset = ISCSI_BHS_LEN + ISCSI_DIGEST_LEN;
1161 	rc = iscsi_build_iovs(&conn, iovs, 5, &pdu, &mapped_length);
1162 	CU_ASSERT(rc == 2);
1163 	CU_ASSERT(iovs[0].iov_base == (void *)pdu.data);
1164 	CU_ASSERT(iovs[0].iov_len == 512);
1165 	CU_ASSERT(iovs[1].iov_base == (void *)pdu.data_digest);
1166 	CU_ASSERT(iovs[1].iov_len == ISCSI_DIGEST_LEN);
1167 	CU_ASSERT(mapped_length == 512 + ISCSI_DIGEST_LEN);
1168 
1169 	pdu.writev_offset = ISCSI_BHS_LEN + ISCSI_DIGEST_LEN + 512;
1170 	rc = iscsi_build_iovs(&conn, iovs, 5, &pdu, &mapped_length);
1171 	CU_ASSERT(rc == 1);
1172 	CU_ASSERT(iovs[0].iov_base == (void *)pdu.data_digest);
1173 	CU_ASSERT(iovs[0].iov_len == ISCSI_DIGEST_LEN);
1174 	CU_ASSERT(mapped_length == ISCSI_DIGEST_LEN);
1175 
1176 	pdu.writev_offset = ISCSI_BHS_LEN + ISCSI_DIGEST_LEN + 512 + ISCSI_DIGEST_LEN / 2;
1177 	rc = iscsi_build_iovs(&conn, iovs, 5, &pdu, &mapped_length);
1178 	CU_ASSERT(rc == 1);
1179 	CU_ASSERT(iovs[0].iov_base == (void *)((uint8_t *)pdu.data_digest + ISCSI_DIGEST_LEN / 2));
1180 	CU_ASSERT(iovs[0].iov_len == ISCSI_DIGEST_LEN / 2);
1181 	CU_ASSERT(mapped_length == ISCSI_DIGEST_LEN / 2);
1182 
1183 	pdu.writev_offset = ISCSI_BHS_LEN + ISCSI_DIGEST_LEN + 512 + ISCSI_DIGEST_LEN;
1184 	rc = iscsi_build_iovs(&conn, iovs, 5, &pdu, &mapped_length);
1185 	CU_ASSERT(rc == 0);
1186 	CU_ASSERT(mapped_length == 0);
1187 
1188 	pdu.writev_offset = 0;
1189 	rc = iscsi_build_iovs(&conn, iovs, 1, &pdu, &mapped_length);
1190 	CU_ASSERT(rc == 1);
1191 	CU_ASSERT(iovs[0].iov_base == (void *)&pdu.bhs);
1192 	CU_ASSERT(iovs[0].iov_len == ISCSI_BHS_LEN);
1193 	CU_ASSERT(mapped_length == ISCSI_BHS_LEN);
1194 
1195 	rc = iscsi_build_iovs(&conn, iovs, 2, &pdu, &mapped_length);
1196 	CU_ASSERT(rc == 2);
1197 	CU_ASSERT(iovs[0].iov_base == (void *)&pdu.bhs);
1198 	CU_ASSERT(iovs[0].iov_len == ISCSI_BHS_LEN);
1199 	CU_ASSERT(iovs[1].iov_base == (void *)pdu.header_digest);
1200 	CU_ASSERT(iovs[1].iov_len == ISCSI_DIGEST_LEN);
1201 	CU_ASSERT(mapped_length == ISCSI_BHS_LEN + ISCSI_DIGEST_LEN);
1202 
1203 	rc = iscsi_build_iovs(&conn, iovs, 3, &pdu, &mapped_length);
1204 	CU_ASSERT(rc == 3);
1205 	CU_ASSERT(iovs[0].iov_base == (void *)&pdu.bhs);
1206 	CU_ASSERT(iovs[0].iov_len == ISCSI_BHS_LEN);
1207 	CU_ASSERT(iovs[1].iov_base == (void *)pdu.header_digest);
1208 	CU_ASSERT(iovs[1].iov_len == ISCSI_DIGEST_LEN);
1209 	CU_ASSERT(iovs[2].iov_base == (void *)pdu.data);
1210 	CU_ASSERT(iovs[2].iov_len == 512);
1211 	CU_ASSERT(mapped_length == ISCSI_BHS_LEN + ISCSI_DIGEST_LEN + 512);
1212 
1213 	rc = iscsi_build_iovs(&conn, iovs, 4, &pdu, &mapped_length);
1214 	CU_ASSERT(rc == 4);
1215 	CU_ASSERT(iovs[0].iov_base == (void *)&pdu.bhs);
1216 	CU_ASSERT(iovs[0].iov_len == ISCSI_BHS_LEN);
1217 	CU_ASSERT(iovs[1].iov_base == (void *)pdu.header_digest);
1218 	CU_ASSERT(iovs[1].iov_len == ISCSI_DIGEST_LEN);
1219 	CU_ASSERT(iovs[2].iov_base == (void *)pdu.data);
1220 	CU_ASSERT(iovs[2].iov_len == 512);
1221 	CU_ASSERT(iovs[3].iov_base == (void *)pdu.data_digest);
1222 	CU_ASSERT(iovs[3].iov_len == ISCSI_DIGEST_LEN);
1223 	CU_ASSERT(mapped_length == ISCSI_BHS_LEN + ISCSI_DIGEST_LEN + 512 + ISCSI_DIGEST_LEN);
1224 
1225 	free(data);
1226 }
1227 
1228 static void
1229 build_iovs_with_md_test(void)
1230 {
1231 	struct spdk_iscsi_conn conn = {};
1232 	struct spdk_iscsi_pdu pdu = {};
1233 	struct iovec iovs[6] = {};
1234 	uint8_t *data;
1235 	uint32_t mapped_length = 0;
1236 	int rc;
1237 
1238 	conn.header_digest = true;
1239 	conn.data_digest = true;
1240 
1241 	DSET24(&pdu.bhs.data_segment_len, 4096 * 2);
1242 	data = calloc(1, (4096 + 128) * 2);
1243 	SPDK_CU_ASSERT_FATAL(data != NULL);
1244 	pdu.data = data;
1245 	pdu.data_buf_len = (4096 + 128) * 2;
1246 
1247 	pdu.bhs.total_ahs_len = 0;
1248 	pdu.bhs.opcode = ISCSI_OP_SCSI;
1249 
1250 	rc = spdk_dif_ctx_init(&pdu.dif_ctx, 4096 + 128, 128, true, false, SPDK_DIF_TYPE1,
1251 			       0, 0, 0, 0, 0, 0);
1252 	CU_ASSERT(rc == 0);
1253 
1254 	pdu.dif_insert_or_strip = true;
1255 
1256 	pdu.writev_offset = 0;
1257 	rc = iscsi_build_iovs(&conn, iovs, 6, &pdu, &mapped_length);
1258 	CU_ASSERT(rc == 5);
1259 	CU_ASSERT(iovs[0].iov_base == (void *)&pdu.bhs);
1260 	CU_ASSERT(iovs[0].iov_len == ISCSI_BHS_LEN);
1261 	CU_ASSERT(iovs[1].iov_base == (void *)pdu.header_digest);
1262 	CU_ASSERT(iovs[1].iov_len == ISCSI_DIGEST_LEN);
1263 	CU_ASSERT(iovs[2].iov_base == (void *)pdu.data);
1264 	CU_ASSERT(iovs[2].iov_len == 4096);
1265 	CU_ASSERT(iovs[3].iov_base == (void *)(pdu.data + 4096 + 128));
1266 	CU_ASSERT(iovs[3].iov_len == 4096);
1267 	CU_ASSERT(iovs[4].iov_base == (void *)pdu.data_digest);
1268 	CU_ASSERT(iovs[4].iov_len == ISCSI_DIGEST_LEN);
1269 	CU_ASSERT(mapped_length == ISCSI_BHS_LEN + ISCSI_DIGEST_LEN + 4096 * 2 + ISCSI_DIGEST_LEN);
1270 
1271 	pdu.writev_offset = ISCSI_BHS_LEN + ISCSI_DIGEST_LEN + 2048;
1272 	rc = iscsi_build_iovs(&conn, iovs, 6, &pdu, &mapped_length);
1273 	CU_ASSERT(rc == 3);
1274 	CU_ASSERT(iovs[0].iov_base == (void *)(pdu.data + 2048));
1275 	CU_ASSERT(iovs[0].iov_len == 2048);
1276 	CU_ASSERT(iovs[1].iov_base == (void *)(pdu.data + 4096 + 128));
1277 	CU_ASSERT(iovs[1].iov_len == 4096);
1278 	CU_ASSERT(iovs[2].iov_base == (void *)pdu.data_digest);
1279 	CU_ASSERT(iovs[2].iov_len == ISCSI_DIGEST_LEN);
1280 	CU_ASSERT(mapped_length == 2048 + 4096 + ISCSI_DIGEST_LEN);
1281 
1282 	pdu.writev_offset = ISCSI_BHS_LEN + ISCSI_DIGEST_LEN + 4096 * 2;
1283 	rc = iscsi_build_iovs(&conn, iovs, 6, &pdu, &mapped_length);
1284 	CU_ASSERT(rc == 1);
1285 	CU_ASSERT(iovs[0].iov_base == (void *)pdu.data_digest);
1286 	CU_ASSERT(iovs[0].iov_len == ISCSI_DIGEST_LEN);
1287 	CU_ASSERT(mapped_length == ISCSI_DIGEST_LEN);
1288 
1289 	pdu.writev_offset = 0;
1290 	rc = iscsi_build_iovs(&conn, iovs, 3, &pdu, &mapped_length);
1291 	CU_ASSERT(rc == 3);
1292 	CU_ASSERT(iovs[0].iov_base == (void *)&pdu.bhs);
1293 	CU_ASSERT(iovs[0].iov_len == ISCSI_BHS_LEN);
1294 	CU_ASSERT(iovs[1].iov_base == (void *)pdu.header_digest);
1295 	CU_ASSERT(iovs[1].iov_len == ISCSI_DIGEST_LEN);
1296 	CU_ASSERT(iovs[2].iov_base == (void *)pdu.data);
1297 	CU_ASSERT(iovs[2].iov_len == 4096);
1298 	CU_ASSERT(mapped_length == ISCSI_BHS_LEN + ISCSI_DIGEST_LEN + 4096);
1299 
1300 	free(data);
1301 }
1302 
1303 static void
1304 check_iscsi_reject(struct spdk_iscsi_pdu *pdu, uint8_t reason)
1305 {
1306 	struct spdk_iscsi_pdu *rsp_pdu;
1307 	struct iscsi_bhs_reject *reject_bhs;
1308 
1309 	CU_ASSERT(pdu->is_rejected == true);
1310 	rsp_pdu = TAILQ_FIRST(&g_write_pdu_list);
1311 	CU_ASSERT(rsp_pdu != NULL);
1312 	reject_bhs = (struct iscsi_bhs_reject *)&rsp_pdu->bhs;
1313 	CU_ASSERT(reject_bhs->reason == reason);
1314 
1315 	TAILQ_REMOVE(&g_write_pdu_list, rsp_pdu, tailq);
1316 	iscsi_put_pdu(rsp_pdu);
1317 	pdu->is_rejected = false;
1318 }
1319 
1320 static void
1321 check_login_response(uint8_t status_class, uint8_t status_detail)
1322 {
1323 	struct spdk_iscsi_pdu *rsp_pdu;
1324 	struct iscsi_bhs_login_rsp *login_rsph;
1325 
1326 	rsp_pdu = TAILQ_FIRST(&g_write_pdu_list);
1327 	CU_ASSERT(rsp_pdu != NULL);
1328 	login_rsph = (struct iscsi_bhs_login_rsp *)&rsp_pdu->bhs;
1329 	CU_ASSERT(login_rsph->status_class == status_class);
1330 	CU_ASSERT(login_rsph->status_detail == status_detail);
1331 
1332 	TAILQ_REMOVE(&g_write_pdu_list, rsp_pdu, tailq);
1333 	iscsi_put_pdu(rsp_pdu);
1334 }
1335 
1336 static void
1337 pdu_hdr_op_login_test(void)
1338 {
1339 	struct spdk_iscsi_sess sess = {};
1340 	struct spdk_iscsi_conn conn = {};
1341 	struct spdk_iscsi_pdu pdu = {};
1342 	struct iscsi_bhs_login_req *login_reqh;
1343 	int rc;
1344 
1345 	login_reqh = (struct iscsi_bhs_login_req *)&pdu.bhs;
1346 
1347 	/* Case 1 - On discovery session, target only accepts text requests with the
1348 	 * SendTargets key and logout request with reason "close the session".
1349 	 */
1350 	sess.session_type = SESSION_TYPE_DISCOVERY;
1351 	conn.full_feature = true;
1352 	conn.sess = &sess;
1353 
1354 	rc = iscsi_pdu_hdr_op_login(&conn, &pdu);
1355 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1356 
1357 	/* Case 2 - Data segment length is limited to be not more than 8KB, the default
1358 	 * FirstBurstLength, for login request.
1359 	 */
1360 	sess.session_type = SESSION_TYPE_INVALID;
1361 	conn.full_feature = false;
1362 	conn.sess = NULL;
1363 	pdu.data_segment_len = SPDK_ISCSI_FIRST_BURST_LENGTH + 1;
1364 
1365 	rc = iscsi_pdu_hdr_op_login(&conn, &pdu);
1366 	CU_ASSERT(rc == 0);
1367 	check_iscsi_reject(&pdu, ISCSI_REASON_PROTOCOL_ERROR);
1368 
1369 	/* Case 3 - PDU pool is empty */
1370 	pdu.data_segment_len = SPDK_ISCSI_FIRST_BURST_LENGTH;
1371 	g_pdu_pool_is_empty = true;
1372 
1373 	rc = iscsi_pdu_hdr_op_login(&conn, &pdu);
1374 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1375 
1376 	/* Case 4 - A login request with the C bit set to 1 must have the T bit set to 0. */
1377 	g_pdu_pool_is_empty = false;
1378 	login_reqh->flags |= ISCSI_LOGIN_TRANSIT;
1379 	login_reqh->flags |= ISCSI_LOGIN_CONTINUE;
1380 
1381 	rc = iscsi_pdu_hdr_op_login(&conn, &pdu);
1382 	CU_ASSERT(rc == 0);
1383 	check_login_response(ISCSI_CLASS_INITIATOR_ERROR, ISCSI_LOGIN_INITIATOR_ERROR);
1384 
1385 	/* Case 5 - Both version-min and version-max must be set to 0x00. */
1386 	login_reqh->flags = 0;
1387 	login_reqh->version_min = ISCSI_VERSION + 1;
1388 
1389 	rc = iscsi_pdu_hdr_op_login(&conn, &pdu);
1390 	CU_ASSERT(rc == 0);
1391 	check_login_response(ISCSI_CLASS_INITIATOR_ERROR, ISCSI_LOGIN_UNSUPPORTED_VERSION);
1392 
1393 	/* Case 6 - T bit is set to 1 correctly but invalid stage code is set to NSG. */
1394 	login_reqh->version_min = ISCSI_VERSION;
1395 	login_reqh->flags |= ISCSI_LOGIN_TRANSIT;
1396 	login_reqh->flags |= ISCSI_NSG_RESERVED_CODE;
1397 
1398 	rc = iscsi_pdu_hdr_op_login(&conn, &pdu);
1399 	CU_ASSERT(rc == 0);
1400 	check_login_response(ISCSI_CLASS_INITIATOR_ERROR, ISCSI_LOGIN_INITIATOR_ERROR);
1401 
1402 	/* Case 7 - Login request is correct.  Login response is initialized and set to
1403 	 * the current connection.
1404 	 */
1405 	login_reqh->flags = 0;
1406 
1407 	rc = iscsi_pdu_hdr_op_login(&conn, &pdu);
1408 	CU_ASSERT(rc == 0);
1409 	CU_ASSERT(conn.login_rsp_pdu != NULL);
1410 
1411 	iscsi_put_pdu(conn.login_rsp_pdu);
1412 }
1413 
1414 static void
1415 pdu_hdr_op_text_test(void)
1416 {
1417 	struct spdk_iscsi_sess sess = {};
1418 	struct spdk_iscsi_conn conn = {};
1419 	struct spdk_iscsi_pdu pdu = {};
1420 	struct iscsi_bhs_text_req *text_reqh;
1421 	int rc;
1422 
1423 	text_reqh = (struct iscsi_bhs_text_req *)&pdu.bhs;
1424 
1425 	conn.sess = &sess;
1426 
1427 	/* Case 1 - Data segment length for text request must not be more than
1428 	 * FirstBurstLength plus extra space to account for digests.
1429 	 */
1430 	pdu.data_segment_len = iscsi_get_max_immediate_data_size() + 1;
1431 
1432 	rc = iscsi_pdu_hdr_op_text(&conn, &pdu);
1433 	CU_ASSERT(rc == 0);
1434 	check_iscsi_reject(&pdu, ISCSI_REASON_PROTOCOL_ERROR);
1435 
1436 	/* Case 2 - A text request with the C bit set to 1 must have the F bit set to 0. */
1437 	pdu.data_segment_len = iscsi_get_max_immediate_data_size();
1438 	text_reqh->flags |= ISCSI_FLAG_FINAL;
1439 	text_reqh->flags |= ISCSI_TEXT_CONTINUE;
1440 
1441 	rc = iscsi_pdu_hdr_op_text(&conn, &pdu);
1442 	CU_ASSERT(rc == -1);
1443 
1444 	/* Case 3 - ExpStatSN of the text request is expected to match StatSN of the current
1445 	 * connection.  But StarPort iSCSI initiator didn't follow the expectation.  In this
1446 	 * case we overwrite StatSN by ExpStatSN and processes the request as correct.
1447 	 */
1448 	text_reqh->flags = 0;
1449 	to_be32(&text_reqh->exp_stat_sn, 1234);
1450 	to_be32(&conn.StatSN, 4321);
1451 
1452 	rc = iscsi_pdu_hdr_op_text(&conn, &pdu);
1453 	CU_ASSERT(rc == 0);
1454 	CU_ASSERT(conn.StatSN == 1234);
1455 
1456 	/* Case 4 - Text request is the first in the sequence of text requests and responses,
1457 	 * and so its ITT is hold to the current connection.
1458 	 */
1459 	sess.current_text_itt = 0xffffffffU;
1460 	to_be32(&text_reqh->itt, 5678);
1461 
1462 	rc = iscsi_pdu_hdr_op_text(&conn, &pdu);
1463 	CU_ASSERT(rc == 0);
1464 	CU_ASSERT(sess.current_text_itt == 5678);
1465 
1466 	/* Case 5 - If text request is sent as part of a sequence of text requests and responses,
1467 	 * its ITT must be the same for all the text requests.  But it was not.  */
1468 	sess.current_text_itt = 5679;
1469 
1470 	rc = iscsi_pdu_hdr_op_text(&conn, &pdu);
1471 	CU_ASSERT(rc == 0);
1472 	check_iscsi_reject(&pdu, ISCSI_REASON_PROTOCOL_ERROR);
1473 
1474 	/* Case 6 - Different from case 5, its ITT matches the value saved in the connection. */
1475 	text_reqh->flags = 0;
1476 	sess.current_text_itt = 5678;
1477 
1478 	rc = iscsi_pdu_hdr_op_text(&conn, &pdu);
1479 	CU_ASSERT(rc == 0);
1480 }
1481 
1482 static void
1483 check_logout_response(uint8_t response, uint32_t stat_sn, uint32_t exp_cmd_sn,
1484 		      uint32_t max_cmd_sn)
1485 {
1486 	struct spdk_iscsi_pdu *rsp_pdu;
1487 	struct iscsi_bhs_logout_resp *logout_rsph;
1488 
1489 	rsp_pdu = TAILQ_FIRST(&g_write_pdu_list);
1490 	CU_ASSERT(rsp_pdu != NULL);
1491 	logout_rsph = (struct iscsi_bhs_logout_resp *)&rsp_pdu->bhs;
1492 	CU_ASSERT(logout_rsph->response == response);
1493 	CU_ASSERT(from_be32(&logout_rsph->stat_sn) == stat_sn);
1494 	CU_ASSERT(from_be32(&logout_rsph->exp_cmd_sn) == exp_cmd_sn);
1495 	CU_ASSERT(from_be32(&logout_rsph->max_cmd_sn) == max_cmd_sn);
1496 
1497 	TAILQ_REMOVE(&g_write_pdu_list, rsp_pdu, tailq);
1498 	iscsi_put_pdu(rsp_pdu);
1499 }
1500 
1501 static void
1502 pdu_hdr_op_logout_test(void)
1503 {
1504 	struct spdk_iscsi_sess sess = {};
1505 	struct spdk_iscsi_conn conn = {};
1506 	struct spdk_iscsi_pdu pdu = {};
1507 	struct iscsi_bhs_logout_req *logout_reqh;
1508 	int rc;
1509 
1510 	logout_reqh = (struct iscsi_bhs_logout_req *)&pdu.bhs;
1511 
1512 	/* Case 1 - Target can accept logout request only with the reason "close the session"
1513 	 * on discovery session.
1514 	 */
1515 	logout_reqh->reason = 1;
1516 	conn.sess = &sess;
1517 	sess.session_type = SESSION_TYPE_DISCOVERY;
1518 
1519 	rc = iscsi_pdu_hdr_op_logout(&conn, &pdu);
1520 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1521 
1522 	/* Case 2 - Session is not established yet but connection was closed successfully. */
1523 	conn.sess = NULL;
1524 	conn.StatSN = 1234;
1525 	to_be32(&logout_reqh->exp_stat_sn, 1234);
1526 	pdu.cmd_sn = 5678;
1527 
1528 	rc = iscsi_pdu_hdr_op_logout(&conn, &pdu);
1529 	CU_ASSERT(rc == 0);
1530 	check_logout_response(0, 1234, 5678, 5678);
1531 	CU_ASSERT(conn.StatSN == 1235);
1532 
1533 	/* Case 3 - Session type is normal but CID was not found. Hence connection or session
1534 	 * was not closed.
1535 	 */
1536 	sess.session_type = SESSION_TYPE_NORMAL;
1537 	sess.ExpCmdSN = 5679;
1538 	sess.connections = 1;
1539 	conn.sess = &sess;
1540 	conn.id = 1;
1541 
1542 	rc = iscsi_pdu_hdr_op_logout(&conn, &pdu);
1543 	CU_ASSERT(rc == 0);
1544 	check_logout_response(1, 1235, 5679, 1);
1545 	CU_ASSERT(conn.StatSN == 1236);
1546 	CU_ASSERT(sess.MaxCmdSN == 1);
1547 
1548 	/* Case 4 - Session type is normal and CID was found.  Connection or session was closed
1549 	 * successfully.
1550 	 */
1551 	to_be16(&logout_reqh->cid, 1);
1552 
1553 	rc = iscsi_pdu_hdr_op_logout(&conn, &pdu);
1554 	CU_ASSERT(rc == 0);
1555 	check_logout_response(0, 1236, 5679, 2);
1556 	CU_ASSERT(conn.StatSN == 1237);
1557 	CU_ASSERT(sess.MaxCmdSN == 2);
1558 
1559 	/* Case 5 - PDU pool is empty. */
1560 	g_pdu_pool_is_empty = true;
1561 
1562 	rc = iscsi_pdu_hdr_op_logout(&conn, &pdu);
1563 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1564 
1565 	g_pdu_pool_is_empty = false;
1566 }
1567 
1568 static void
1569 check_scsi_task(struct spdk_iscsi_pdu *pdu, enum spdk_scsi_data_dir dir)
1570 {
1571 	struct spdk_iscsi_task *task;
1572 
1573 	task = pdu->task;
1574 	CU_ASSERT(task != NULL);
1575 	CU_ASSERT(task->pdu == pdu);
1576 	CU_ASSERT(task->scsi.dxfer_dir == dir);
1577 
1578 	iscsi_task_put(task);
1579 	pdu->task = NULL;
1580 }
1581 
1582 static void
1583 pdu_hdr_op_scsi_test(void)
1584 {
1585 	struct spdk_iscsi_sess sess = {};
1586 	struct spdk_iscsi_conn conn = {};
1587 	struct spdk_iscsi_pdu pdu = {};
1588 	struct spdk_scsi_dev dev = {};
1589 	struct spdk_scsi_lun lun = {};
1590 	struct iscsi_bhs_scsi_req *scsi_reqh;
1591 	int rc;
1592 
1593 	scsi_reqh = (struct iscsi_bhs_scsi_req *)&pdu.bhs;
1594 
1595 	conn.sess = &sess;
1596 	conn.dev = &dev;
1597 
1598 	/* Case 1 - SCSI command is acceptable only on normal session. */
1599 	sess.session_type = SESSION_TYPE_DISCOVERY;
1600 
1601 	rc = iscsi_pdu_hdr_op_scsi(&conn, &pdu);
1602 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1603 
1604 	/* Case 2 - Task pool is empty. */
1605 	g_task_pool_is_empty = true;
1606 
1607 	rc = iscsi_pdu_hdr_op_scsi(&conn, &pdu);
1608 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1609 
1610 	g_task_pool_is_empty = false;
1611 
1612 	/* Case 3 - bidirectional operations (both R and W flags are set to 1) are not supported. */
1613 	sess.session_type = SESSION_TYPE_NORMAL;
1614 	scsi_reqh->read_bit = 1;
1615 	scsi_reqh->write_bit = 1;
1616 
1617 	rc = iscsi_pdu_hdr_op_scsi(&conn, &pdu);
1618 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1619 
1620 	/* Case 4 - LUN is hot-removed, and return immediately. */
1621 	scsi_reqh->write_bit = 0;
1622 
1623 	rc = iscsi_pdu_hdr_op_scsi(&conn, &pdu);
1624 	CU_ASSERT(rc == 0);
1625 	CU_ASSERT(pdu.task == NULL);
1626 
1627 	/* Case 5 - SCSI read command PDU is correct, and the configured iSCSI task is set to the PDU. */
1628 	dev.lun[0] = &lun;
1629 
1630 	rc = iscsi_pdu_hdr_op_scsi(&conn, &pdu);
1631 	CU_ASSERT(rc == 0);
1632 	check_scsi_task(&pdu, SPDK_SCSI_DIR_FROM_DEV);
1633 
1634 	/* Case 6 - For SCSI write command PDU, its data segment length must not be more than
1635 	 * FirstBurstLength plus extra space to account for digests.
1636 	 */
1637 	scsi_reqh->read_bit = 0;
1638 	scsi_reqh->write_bit = 1;
1639 	pdu.data_segment_len = iscsi_get_max_immediate_data_size() + 1;
1640 
1641 	rc = iscsi_pdu_hdr_op_scsi(&conn, &pdu);
1642 	CU_ASSERT(rc == 0);
1643 	check_iscsi_reject(&pdu, ISCSI_REASON_PROTOCOL_ERROR);
1644 
1645 	/* Case 7 - For SCSI write command PDU, its data segment length must not be more than
1646 	 * Expected Data Transfer Length (EDTL).
1647 	 */
1648 	pdu.data_segment_len = iscsi_get_max_immediate_data_size();
1649 	to_be32(&scsi_reqh->expected_data_xfer_len, pdu.data_segment_len - 1);
1650 
1651 	rc = iscsi_pdu_hdr_op_scsi(&conn, &pdu);
1652 	CU_ASSERT(rc == 0);
1653 	check_iscsi_reject(&pdu, ISCSI_REASON_PROTOCOL_ERROR);
1654 
1655 	/* Case 8 - If ImmediateData is not enabled for the session, SCSI write command PDU
1656 	 * cannot have data segment.
1657 	 */
1658 	to_be32(&scsi_reqh->expected_data_xfer_len, pdu.data_segment_len);
1659 
1660 	rc = iscsi_pdu_hdr_op_scsi(&conn, &pdu);
1661 	CU_ASSERT(rc == 0);
1662 	check_iscsi_reject(&pdu, ISCSI_REASON_PROTOCOL_ERROR);
1663 
1664 	/* Case 9 - For SCSI write command PDU, its data segment length must not be more
1665 	 * than FirstBurstLength.
1666 	 */
1667 	sess.ImmediateData = true;
1668 
1669 	rc = iscsi_pdu_hdr_op_scsi(&conn, &pdu);
1670 	CU_ASSERT(rc == 0);
1671 	check_iscsi_reject(&pdu, ISCSI_REASON_PROTOCOL_ERROR);
1672 
1673 	/* Case 10 - SCSI write command PDU is correct, and the configured iSCSI task is set to the PDU. */
1674 	sess.FirstBurstLength = pdu.data_segment_len;
1675 
1676 	rc = iscsi_pdu_hdr_op_scsi(&conn, &pdu);
1677 	CU_ASSERT(rc == 0);
1678 	check_scsi_task(&pdu, SPDK_SCSI_DIR_TO_DEV);
1679 
1680 	/* Case 11 - R and W must not both be 0 when EDTL is not 0. */
1681 	scsi_reqh->write_bit = 0;
1682 
1683 	rc = iscsi_pdu_hdr_op_scsi(&conn, &pdu);
1684 	CU_ASSERT(rc == 0);
1685 	check_iscsi_reject(&pdu, ISCSI_REASON_INVALID_PDU_FIELD);
1686 
1687 	/* Case 11 - R and W are both 0 and EDTL is also 0, and hence SCSI command PDU is accepted. */
1688 	to_be32(&scsi_reqh->expected_data_xfer_len, 0);
1689 
1690 	rc = iscsi_pdu_hdr_op_scsi(&conn, &pdu);
1691 	CU_ASSERT(rc == 0);
1692 	check_scsi_task(&pdu, SPDK_SCSI_DIR_NONE);
1693 }
1694 
1695 static void
1696 check_iscsi_task_mgmt_response(uint8_t response, uint32_t task_tag, uint32_t stat_sn,
1697 			       uint32_t exp_cmd_sn, uint32_t max_cmd_sn)
1698 {
1699 	struct spdk_iscsi_pdu *rsp_pdu;
1700 	struct iscsi_bhs_task_resp *rsph;
1701 
1702 	rsp_pdu = TAILQ_FIRST(&g_write_pdu_list);
1703 	CU_ASSERT(rsp_pdu != NULL);
1704 	rsph = (struct iscsi_bhs_task_resp *)&rsp_pdu->bhs;
1705 	CU_ASSERT(rsph->response == response);
1706 	CU_ASSERT(from_be32(&rsph->itt) == task_tag);
1707 	CU_ASSERT(from_be32(&rsph->exp_cmd_sn) == exp_cmd_sn);
1708 	CU_ASSERT(from_be32(&rsph->max_cmd_sn) == max_cmd_sn);
1709 
1710 	TAILQ_REMOVE(&g_write_pdu_list, rsp_pdu, tailq);
1711 	iscsi_put_pdu(rsp_pdu);
1712 }
1713 
1714 static void
1715 pdu_hdr_op_task_mgmt_test(void)
1716 {
1717 	struct spdk_iscsi_sess sess = {};
1718 	struct spdk_iscsi_conn conn = {};
1719 	struct spdk_iscsi_pdu pdu = {};
1720 	struct spdk_scsi_dev dev = {};
1721 	struct spdk_scsi_lun lun = {};
1722 	struct iscsi_bhs_task_req *task_reqh;
1723 	int rc;
1724 
1725 	/* TBD: This test covers only error paths before creating iSCSI task for now.
1726 	 * Testing iSCSI task creation in iscsi_pdu_hdr_op_task() by UT is not simple
1727 	 * and do it separately later.
1728 	 */
1729 
1730 	task_reqh = (struct iscsi_bhs_task_req *)&pdu.bhs;
1731 
1732 	conn.sess = &sess;
1733 	conn.dev = &dev;
1734 
1735 	/* Case 1 - Task Management Function request PDU is acceptable only on normal session. */
1736 	sess.session_type = SESSION_TYPE_DISCOVERY;
1737 
1738 	rc = iscsi_pdu_hdr_op_task(&conn, &pdu);
1739 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1740 
1741 	/* Case 2 - LUN is hot removed.  "LUN does not exist" response is sent. */
1742 	sess.session_type = SESSION_TYPE_NORMAL;
1743 	task_reqh->immediate = 0;
1744 	to_be32(&task_reqh->itt, 1234);
1745 
1746 	rc = iscsi_pdu_hdr_op_task(&conn, &pdu);
1747 	CU_ASSERT(rc == 0);
1748 	check_iscsi_task_mgmt_response(ISCSI_TASK_FUNC_RESP_LUN_NOT_EXIST, 1234, 0, 0, 1);
1749 
1750 	/* Case 3 - Unassigned function is specified.  "Function rejected" response is sent. */
1751 	dev.lun[0] = &lun;
1752 	task_reqh->flags = 0;
1753 
1754 	rc = iscsi_pdu_hdr_op_task(&conn, &pdu);
1755 	CU_ASSERT(rc == 0);
1756 	check_iscsi_task_mgmt_response(ISCSI_TASK_FUNC_REJECTED, 1234, 0, 0, 2);
1757 
1758 	/* Case 4 - CLEAR TASK SET is not supported.  "Task management function not supported"
1759 	 * response is sent.
1760 	 */
1761 	task_reqh->flags = ISCSI_TASK_FUNC_CLEAR_TASK_SET;
1762 
1763 	rc = iscsi_pdu_hdr_op_task(&conn, &pdu);
1764 	CU_ASSERT(rc == 0);
1765 	check_iscsi_task_mgmt_response(ISCSI_TASK_FUNC_RESP_FUNC_NOT_SUPPORTED, 1234, 0, 0, 3);
1766 
1767 	/* Case 5 - CLEAR ACA is not supported.  "Task management function not supported" is sent. */
1768 	task_reqh->flags = ISCSI_TASK_FUNC_CLEAR_ACA;
1769 
1770 	rc = iscsi_pdu_hdr_op_task(&conn, &pdu);
1771 	CU_ASSERT(rc == 0);
1772 	check_iscsi_task_mgmt_response(ISCSI_TASK_FUNC_RESP_FUNC_NOT_SUPPORTED, 1234, 0, 0, 4);
1773 
1774 	/* Case 6 - TARGET WARM RESET is not supported.  "Task management function not supported
1775 	 * is sent.
1776 	 */
1777 	task_reqh->flags = ISCSI_TASK_FUNC_TARGET_WARM_RESET;
1778 
1779 	rc = iscsi_pdu_hdr_op_task(&conn, &pdu);
1780 	CU_ASSERT(rc == 0);
1781 	check_iscsi_task_mgmt_response(ISCSI_TASK_FUNC_RESP_FUNC_NOT_SUPPORTED, 1234, 0, 0, 5);
1782 
1783 	/* Case 7 - TARGET COLD RESET is not supported. "Task management function not supported
1784 	 * is sent.
1785 	 */
1786 	task_reqh->flags = ISCSI_TASK_FUNC_TARGET_COLD_RESET;
1787 
1788 	rc = iscsi_pdu_hdr_op_task(&conn, &pdu);
1789 	CU_ASSERT(rc == 0);
1790 	check_iscsi_task_mgmt_response(ISCSI_TASK_FUNC_RESP_FUNC_NOT_SUPPORTED, 1234, 0, 0, 6);
1791 
1792 	/* Case 8 - TASK REASSIGN is not supported. "Task management function not supported" is sent. */
1793 	task_reqh->flags = ISCSI_TASK_FUNC_TASK_REASSIGN;
1794 
1795 	rc = iscsi_pdu_hdr_op_task(&conn, &pdu);
1796 	CU_ASSERT(rc == 0);
1797 	check_iscsi_task_mgmt_response(ISCSI_TASK_FUNC_RESP_FUNC_NOT_SUPPORTED, 1234, 0, 0, 7);
1798 }
1799 
1800 static void
1801 pdu_hdr_op_nopout_test(void)
1802 {
1803 	struct spdk_iscsi_sess sess = {};
1804 	struct spdk_iscsi_conn conn = {};
1805 	struct spdk_iscsi_pdu pdu = {};
1806 	struct iscsi_bhs_nop_out *nopout_reqh;
1807 	int rc;
1808 
1809 	nopout_reqh = (struct iscsi_bhs_nop_out *)&pdu.bhs;
1810 
1811 	conn.sess = &sess;
1812 
1813 	/* Case 1 - NOP-Out PDU is acceptable only on normal session. */
1814 	sess.session_type = SESSION_TYPE_DISCOVERY;
1815 
1816 	rc = iscsi_pdu_hdr_op_nopout(&conn, &pdu);
1817 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1818 
1819 	/* Case 2 - The length of the reflected ping data is limited to MaxRecvDataSegmentLength. */
1820 	sess.session_type = SESSION_TYPE_NORMAL;
1821 	pdu.data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH + 1;
1822 
1823 	rc = iscsi_pdu_hdr_op_nopout(&conn, &pdu);
1824 	CU_ASSERT(rc == 0);
1825 	check_iscsi_reject(&pdu, ISCSI_REASON_PROTOCOL_ERROR);
1826 
1827 	/* Case 3 - If Initiator Task Tag contains 0xffffffff, the I bit must be set
1828 	 * to 1 and Target Transfer Tag should be copied from NOP-In PDU.  This case
1829 	 * satisfies the former but doesn't satisfy the latter, but ignore the error
1830 	 * for now.
1831 	 */
1832 	pdu.data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
1833 	conn.id = 1234;
1834 	to_be32(&nopout_reqh->ttt, 1235);
1835 	to_be32(&nopout_reqh->itt, 0xffffffffU);
1836 	nopout_reqh->immediate = 1;
1837 
1838 	rc = iscsi_pdu_hdr_op_nopout(&conn, &pdu);
1839 	CU_ASSERT(rc == 0);
1840 
1841 	/* Case 4 - This case doesn't satisfy the above former. This error is not ignored. */
1842 	nopout_reqh->immediate = 0;
1843 
1844 	rc = iscsi_pdu_hdr_op_nopout(&conn, &pdu);
1845 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1846 }
1847 
1848 static void
1849 check_iscsi_r2t(struct spdk_iscsi_task *task, uint32_t len)
1850 {
1851 	struct spdk_iscsi_pdu *rsp_pdu;
1852 	struct iscsi_bhs_r2t *rsph;
1853 
1854 	rsp_pdu = TAILQ_FIRST(&g_write_pdu_list);
1855 	CU_ASSERT(rsp_pdu != NULL);
1856 	rsph = (struct iscsi_bhs_r2t *)&rsp_pdu->bhs;
1857 	CU_ASSERT(rsph->opcode == ISCSI_OP_R2T);
1858 	CU_ASSERT(from_be64(&rsph->lun) == spdk_scsi_lun_id_int_to_fmt(task->lun_id));
1859 	CU_ASSERT(from_be32(&rsph->buffer_offset) == task->next_r2t_offset);
1860 	CU_ASSERT(from_be32(&rsph->desired_xfer_len) == len);
1861 
1862 	TAILQ_REMOVE(&g_write_pdu_list, rsp_pdu, tailq);
1863 	iscsi_put_pdu(rsp_pdu);
1864 }
1865 
1866 static void
1867 pdu_hdr_op_data_test(void)
1868 {
1869 	struct spdk_iscsi_sess sess = {};
1870 	struct spdk_iscsi_conn conn = {};
1871 	struct spdk_iscsi_pdu pdu = {};
1872 	struct spdk_iscsi_task primary = {};
1873 	struct spdk_scsi_dev dev = {};
1874 	struct spdk_scsi_lun lun = {};
1875 	struct iscsi_bhs_data_out *data_reqh;
1876 	int rc;
1877 
1878 	data_reqh = (struct iscsi_bhs_data_out *)&pdu.bhs;
1879 
1880 	conn.sess = &sess;
1881 	conn.dev = &dev;
1882 	TAILQ_INIT(&conn.active_r2t_tasks);
1883 
1884 	/* Case 1 - SCSI Data-Out PDU is acceptable only on normal session. */
1885 	sess.session_type = SESSION_TYPE_DISCOVERY;
1886 
1887 	rc = iscsi_pdu_hdr_op_data(&conn, &pdu);
1888 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1889 
1890 	/* Case 2 - Data segment length must not be more than MaxRecvDataSegmentLength. */
1891 	sess.session_type = SESSION_TYPE_NORMAL;
1892 	pdu.data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH + 1;
1893 
1894 	rc = iscsi_pdu_hdr_op_data(&conn, &pdu);
1895 	CU_ASSERT(rc == 0);
1896 	check_iscsi_reject(&pdu, ISCSI_REASON_PROTOCOL_ERROR);
1897 
1898 	/* Case 3 - R2T task whose Target Transfer Tag matches is not found. */
1899 	pdu.data_segment_len = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
1900 
1901 	rc = iscsi_pdu_hdr_op_data(&conn, &pdu);
1902 	CU_ASSERT(rc == 0);
1903 	check_iscsi_reject(&pdu, ISCSI_REASON_INVALID_PDU_FIELD);
1904 
1905 	/* Case 4 - R2T task whose Target Transfer Tag matches is found but data segment length
1906 	 * is more than Desired Data Transfer Length of the R2T.
1907 	 */
1908 	primary.desired_data_transfer_length = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH - 1;
1909 	conn.pending_r2t = 1;
1910 	TAILQ_INSERT_TAIL(&conn.active_r2t_tasks, &primary, link);
1911 
1912 	rc = iscsi_pdu_hdr_op_data(&conn, &pdu);
1913 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1914 
1915 	/* Case 5 - Initiator task tag doesn't match tag of R2T task. */
1916 	primary.desired_data_transfer_length = SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH;
1917 	to_be32(&data_reqh->itt, 1);
1918 
1919 	rc = iscsi_pdu_hdr_op_data(&conn, &pdu);
1920 	CU_ASSERT(rc == 0);
1921 	check_iscsi_reject(&pdu, ISCSI_REASON_INVALID_PDU_FIELD);
1922 
1923 	/* Case 6 - DataSN doesn't match the Data-Out PDU number within the current
1924 	 * output sequence.
1925 	 */
1926 	to_be32(&data_reqh->itt, 0);
1927 	to_be32(&data_reqh->data_sn, 1);
1928 
1929 	rc = iscsi_pdu_hdr_op_data(&conn, &pdu);
1930 	CU_ASSERT(rc == 0);
1931 	check_iscsi_reject(&pdu, ISCSI_REASON_PROTOCOL_ERROR);
1932 
1933 	/* Case 7 - Output sequence must be in increasing buffer offset and must not
1934 	 * be overlaid but they are not satisfied.
1935 	 */
1936 	to_be32(&data_reqh->data_sn, 0);
1937 	to_be32(&data_reqh->buffer_offset, 4096);
1938 
1939 	rc = iscsi_pdu_hdr_op_data(&conn, &pdu);
1940 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1941 
1942 	/* Case 8 - Data segment length must not exceed MaxBurstLength. */
1943 	to_be32(&data_reqh->buffer_offset, 0);
1944 	sess.MaxBurstLength = pdu.data_segment_len - 1;
1945 
1946 	rc = iscsi_pdu_hdr_op_data(&conn, &pdu);
1947 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1948 
1949 	/* Case 9 - LUN is hot removed. */
1950 	sess.MaxBurstLength = pdu.data_segment_len * 4;
1951 	to_be32(&data_reqh->data_sn, primary.r2t_datasn);
1952 	to_be32(&data_reqh->buffer_offset, primary.next_expected_r2t_offset);
1953 
1954 	rc = iscsi_pdu_hdr_op_data(&conn, &pdu);
1955 	CU_ASSERT(rc == 0);
1956 	CU_ASSERT(pdu.task == NULL);
1957 
1958 	/* Case 10 - SCSI Data-Out PDU is correct and processed. Created task is held
1959 	 * to the PDU, but its F bit is 0 and hence R2T is not sent.
1960 	 */
1961 	dev.lun[0] = &lun;
1962 	to_be32(&data_reqh->data_sn, primary.r2t_datasn);
1963 	to_be32(&data_reqh->buffer_offset, primary.next_expected_r2t_offset);
1964 
1965 	rc = iscsi_pdu_hdr_op_data(&conn, &pdu);
1966 	CU_ASSERT(rc == 0);
1967 	CU_ASSERT(pdu.task != NULL);
1968 	iscsi_task_put(pdu.task);
1969 	pdu.task = NULL;
1970 
1971 	/* Case 11 - SCSI Data-Out PDU is correct and processed. Created task is held
1972 	 * to the PDU, and Its F bit is 1 and hence R2T is sent.
1973 	 */
1974 	data_reqh->flags |= ISCSI_FLAG_FINAL;
1975 	to_be32(&data_reqh->data_sn, primary.r2t_datasn);
1976 	to_be32(&data_reqh->buffer_offset, primary.next_expected_r2t_offset);
1977 	primary.scsi.transfer_len = pdu.data_segment_len * 5;
1978 
1979 	rc = iscsi_pdu_hdr_op_data(&conn, &pdu);
1980 	CU_ASSERT(rc == 0);
1981 	CU_ASSERT(pdu.task != NULL);
1982 	check_iscsi_r2t(pdu.task, pdu.data_segment_len * 4);
1983 	iscsi_task_put(pdu.task);
1984 
1985 	/* Case 12 - Task pool is empty. */
1986 	to_be32(&data_reqh->data_sn, primary.r2t_datasn);
1987 	to_be32(&data_reqh->buffer_offset, primary.next_expected_r2t_offset);
1988 	g_task_pool_is_empty = true;
1989 
1990 	rc = iscsi_pdu_hdr_op_data(&conn, &pdu);
1991 	CU_ASSERT(rc == SPDK_ISCSI_CONNECTION_FATAL);
1992 
1993 	g_task_pool_is_empty = false;
1994 }
1995 
1996 int
1997 main(int argc, char **argv)
1998 {
1999 	CU_pSuite	suite = NULL;
2000 	unsigned int	num_failures;
2001 
2002 	CU_set_error_action(CUEA_ABORT);
2003 	CU_initialize_registry();
2004 
2005 	suite = CU_add_suite("iscsi_suite", NULL, NULL);
2006 
2007 	CU_ADD_TEST(suite, op_login_check_target_test);
2008 	CU_ADD_TEST(suite, op_login_session_normal_test);
2009 	CU_ADD_TEST(suite, maxburstlength_test);
2010 	CU_ADD_TEST(suite, underflow_for_read_transfer_test);
2011 	CU_ADD_TEST(suite, underflow_for_zero_read_transfer_test);
2012 	CU_ADD_TEST(suite, underflow_for_request_sense_test);
2013 	CU_ADD_TEST(suite, underflow_for_check_condition_test);
2014 	CU_ADD_TEST(suite, add_transfer_task_test);
2015 	CU_ADD_TEST(suite, get_transfer_task_test);
2016 	CU_ADD_TEST(suite, del_transfer_task_test);
2017 	CU_ADD_TEST(suite, clear_all_transfer_tasks_test);
2018 	CU_ADD_TEST(suite, build_iovs_test);
2019 	CU_ADD_TEST(suite, build_iovs_with_md_test);
2020 	CU_ADD_TEST(suite, pdu_hdr_op_login_test);
2021 	CU_ADD_TEST(suite, pdu_hdr_op_text_test);
2022 	CU_ADD_TEST(suite, pdu_hdr_op_logout_test);
2023 	CU_ADD_TEST(suite, pdu_hdr_op_scsi_test);
2024 	CU_ADD_TEST(suite, pdu_hdr_op_task_mgmt_test);
2025 	CU_ADD_TEST(suite, pdu_hdr_op_nopout_test);
2026 	CU_ADD_TEST(suite, pdu_hdr_op_data_test);
2027 
2028 	CU_basic_set_mode(CU_BRM_VERBOSE);
2029 	CU_basic_run_tests();
2030 	num_failures = CU_get_number_of_failures();
2031 	CU_cleanup_registry();
2032 	return num_failures;
2033 }
2034