1 /* SPDX-License-Identifier: BSD-3-Clause 2 * Copyright(c) 2010-2015 Intel Corporation. 3 * Copyright 2013-2014 6WIND S.A. 4 */ 5 6 #ifndef _RTE_BUS_PCI_H_ 7 #define _RTE_BUS_PCI_H_ 8 9 /** 10 * @file 11 * PCI device & driver interface 12 */ 13 14 #ifdef __cplusplus 15 extern "C" { 16 #endif 17 18 #include <stdio.h> 19 #include <stdlib.h> 20 #include <limits.h> 21 #include <errno.h> 22 #include <stdint.h> 23 #include <inttypes.h> 24 25 #include <rte_debug.h> 26 #include <rte_interrupts.h> 27 #include "rte_dev.h" 28 #include "rte_bus.h" 29 #include <rte_pci.h> 30 31 /** Pathname of PCI devices directory. */ 32 const char *rte_pci_get_sysfs_path(void); 33 34 /* Forward declarations */ 35 struct rte_pci_device; 36 struct rte_pci_driver; 37 38 /** List of PCI devices */ 39 RTE_TAILQ_HEAD(rte_pci_device_list, rte_pci_device); 40 /** List of PCI drivers */ 41 RTE_TAILQ_HEAD(rte_pci_driver_list, rte_pci_driver); 42 43 /* PCI Bus iterators */ 44 #define FOREACH_DEVICE_ON_PCIBUS(p) \ 45 RTE_TAILQ_FOREACH(p, &(rte_pci_bus.device_list), next) 46 47 #define FOREACH_DRIVER_ON_PCIBUS(p) \ 48 RTE_TAILQ_FOREACH(p, &(rte_pci_bus.driver_list), next) 49 50 struct rte_devargs; 51 52 enum rte_pci_kernel_driver { 53 RTE_PCI_KDRV_UNKNOWN = 0, /* may be misc UIO or bifurcated driver */ 54 RTE_PCI_KDRV_IGB_UIO, /* igb_uio for Linux */ 55 RTE_PCI_KDRV_VFIO, /* VFIO for Linux */ 56 RTE_PCI_KDRV_UIO_GENERIC, /* uio_pci_generic for Linux */ 57 RTE_PCI_KDRV_NIC_UIO, /* nic_uio for FreeBSD */ 58 RTE_PCI_KDRV_NONE, /* no attached driver */ 59 RTE_PCI_KDRV_NET_UIO, /* NetUIO for Windows */ 60 }; 61 62 /** 63 * A structure describing a PCI device. 64 */ 65 struct rte_pci_device { 66 RTE_TAILQ_ENTRY(rte_pci_device) next; /**< Next probed PCI device. */ 67 struct rte_device device; /**< Inherit core device */ 68 struct rte_pci_addr addr; /**< PCI location. */ 69 struct rte_pci_id id; /**< PCI ID. */ 70 struct rte_mem_resource mem_resource[PCI_MAX_RESOURCE]; 71 /**< PCI Memory Resource */ 72 #if RTE_VERSION < RTE_VERSION_NUM(21, 11, 0, 0) 73 struct rte_intr_handle intr_handle; /**< Interrupt handle */ 74 #else 75 struct rte_intr_handle *intr_handle; /**< Interrupt handle */ 76 #endif 77 struct rte_pci_driver *driver; /**< PCI driver used in probing */ 78 uint16_t max_vfs; /**< sriov enable if not zero */ 79 enum rte_pci_kernel_driver kdrv; /**< Kernel driver passthrough */ 80 char name[PCI_PRI_STR_SIZE+1]; /**< PCI location (ASCII) */ 81 struct rte_intr_handle *vfio_req_intr_handle; 82 /**< Handler of VFIO request interrupt */ 83 }; 84 85 /** 86 * @internal 87 * Helper macro for drivers that need to convert to struct rte_pci_device. 88 */ 89 #define RTE_DEV_TO_PCI(ptr) container_of(ptr, struct rte_pci_device, device) 90 91 #define RTE_DEV_TO_PCI_CONST(ptr) \ 92 container_of(ptr, const struct rte_pci_device, device) 93 94 #define RTE_ETH_DEV_TO_PCI(eth_dev) RTE_DEV_TO_PCI((eth_dev)->device) 95 96 #ifdef __cplusplus 97 /** C++ macro used to help building up tables of device IDs */ 98 #define RTE_PCI_DEVICE(vend, dev) \ 99 RTE_CLASS_ANY_ID, \ 100 (vend), \ 101 (dev), \ 102 RTE_PCI_ANY_ID, \ 103 RTE_PCI_ANY_ID 104 #else 105 /** Macro used to help building up tables of device IDs */ 106 #define RTE_PCI_DEVICE(vend, dev) \ 107 .class_id = RTE_CLASS_ANY_ID, \ 108 .vendor_id = (vend), \ 109 .device_id = (dev), \ 110 .subsystem_vendor_id = RTE_PCI_ANY_ID, \ 111 .subsystem_device_id = RTE_PCI_ANY_ID 112 #endif 113 114 /** 115 * Initialisation function for the driver called during PCI probing. 116 */ 117 typedef int (rte_pci_probe_t)(struct rte_pci_driver *, struct rte_pci_device *); 118 119 /** 120 * Uninitialisation function for the driver called during hotplugging. 121 */ 122 typedef int (rte_pci_remove_t)(struct rte_pci_device *); 123 124 /** 125 * Driver-specific DMA mapping. After a successful call the device 126 * will be able to read/write from/to this segment. 127 * 128 * @param dev 129 * Pointer to the PCI device. 130 * @param addr 131 * Starting virtual address of memory to be mapped. 132 * @param iova 133 * Starting IOVA address of memory to be mapped. 134 * @param len 135 * Length of memory segment being mapped. 136 * @return 137 * - 0 On success. 138 * - Negative value and rte_errno is set otherwise. 139 */ 140 typedef int (pci_dma_map_t)(struct rte_pci_device *dev, void *addr, 141 uint64_t iova, size_t len); 142 143 /** 144 * Driver-specific DMA un-mapping. After a successful call the device 145 * will not be able to read/write from/to this segment. 146 * 147 * @param dev 148 * Pointer to the PCI device. 149 * @param addr 150 * Starting virtual address of memory to be unmapped. 151 * @param iova 152 * Starting IOVA address of memory to be unmapped. 153 * @param len 154 * Length of memory segment being unmapped. 155 * @return 156 * - 0 On success. 157 * - Negative value and rte_errno is set otherwise. 158 */ 159 typedef int (pci_dma_unmap_t)(struct rte_pci_device *dev, void *addr, 160 uint64_t iova, size_t len); 161 162 /** 163 * A structure describing a PCI driver. 164 */ 165 struct rte_pci_driver { 166 RTE_TAILQ_ENTRY(rte_pci_driver) next; /**< Next in list. */ 167 struct rte_driver driver; /**< Inherit core driver. */ 168 struct rte_pci_bus *bus; /**< PCI bus reference. */ 169 rte_pci_probe_t *probe; /**< Device probe function. */ 170 rte_pci_remove_t *remove; /**< Device remove function. */ 171 pci_dma_map_t *dma_map; /**< device dma map function. */ 172 pci_dma_unmap_t *dma_unmap; /**< device dma unmap function. */ 173 const struct rte_pci_id *id_table; /**< ID table, NULL terminated. */ 174 uint32_t drv_flags; /**< Flags RTE_PCI_DRV_*. */ 175 }; 176 177 /** 178 * Structure describing the PCI bus 179 */ 180 struct rte_pci_bus { 181 struct rte_bus bus; /**< Inherit the generic class */ 182 struct rte_pci_device_list device_list; /**< List of PCI devices */ 183 struct rte_pci_driver_list driver_list; /**< List of PCI drivers */ 184 }; 185 186 /** Device needs PCI BAR mapping (done with either IGB_UIO or VFIO) */ 187 #define RTE_PCI_DRV_NEED_MAPPING 0x0001 188 /** Device needs PCI BAR mapping with enabled write combining (wc) */ 189 #define RTE_PCI_DRV_WC_ACTIVATE 0x0002 190 /** Device already probed can be probed again to check for new ports. */ 191 #define RTE_PCI_DRV_PROBE_AGAIN 0x0004 192 /** Device driver supports link state interrupt */ 193 #define RTE_PCI_DRV_INTR_LSC 0x0008 194 /** Device driver supports device removal interrupt */ 195 #define RTE_PCI_DRV_INTR_RMV 0x0010 196 /** Device driver needs to keep mapped resources if unsupported dev detected */ 197 #define RTE_PCI_DRV_KEEP_MAPPED_RES 0x0020 198 /** Device driver needs IOVA as VA and cannot work with IOVA as PA */ 199 #define RTE_PCI_DRV_NEED_IOVA_AS_VA 0x0040 200 201 /** 202 * Map the PCI device resources in user space virtual memory address 203 * 204 * Note that driver should not call this function when flag 205 * RTE_PCI_DRV_NEED_MAPPING is set, as EAL will do that for 206 * you when it's on. 207 * 208 * @param dev 209 * A pointer to a rte_pci_device structure describing the device 210 * to use 211 * 212 * @return 213 * 0 on success, negative on error and positive if no driver 214 * is found for the device. 215 */ 216 int rte_pci_map_device(struct rte_pci_device *dev); 217 218 /** 219 * Unmap this device 220 * 221 * @param dev 222 * A pointer to a rte_pci_device structure describing the device 223 * to use 224 */ 225 void rte_pci_unmap_device(struct rte_pci_device *dev); 226 227 /** 228 * Dump the content of the PCI bus. 229 * 230 * @param f 231 * A pointer to a file for output 232 */ 233 void rte_pci_dump(FILE *f); 234 235 /** 236 * Find device's extended PCI capability. 237 * 238 * @param dev 239 * A pointer to rte_pci_device structure. 240 * 241 * @param cap 242 * Extended capability to be found, which can be any from 243 * RTE_PCI_EXT_CAP_ID_*, defined in librte_pci. 244 * 245 * @return 246 * > 0: The offset of the next matching extended capability structure 247 * within the device's PCI configuration space. 248 * < 0: An error in PCI config space read. 249 * = 0: Device does not support it. 250 */ 251 __rte_experimental 252 off_t rte_pci_find_ext_capability(struct rte_pci_device *dev, uint32_t cap); 253 254 /** 255 * Enables/Disables Bus Master for device's PCI command register. 256 * 257 * @param dev 258 * A pointer to rte_pci_device structure. 259 * @param enable 260 * Enable or disable Bus Master. 261 * 262 * @return 263 * 0 on success, -1 on error in PCI config space read/write. 264 */ 265 __rte_experimental 266 int rte_pci_set_bus_master(struct rte_pci_device *dev, bool enable); 267 268 /** 269 * Register a PCI driver. 270 * 271 * @param driver 272 * A pointer to a rte_pci_driver structure describing the driver 273 * to be registered. 274 */ 275 void rte_pci_register(struct rte_pci_driver *driver); 276 277 /** Helper for PCI device registration from driver (eth, crypto) instance */ 278 #define RTE_PMD_REGISTER_PCI(nm, pci_drv) \ 279 RTE_INIT(pciinitfn_ ##nm) \ 280 {\ 281 (pci_drv).driver.name = RTE_STR(nm);\ 282 rte_pci_register(&pci_drv); \ 283 } \ 284 RTE_PMD_EXPORT_NAME(nm, __COUNTER__) 285 286 /** 287 * Unregister a PCI driver. 288 * 289 * @param driver 290 * A pointer to a rte_pci_driver structure describing the driver 291 * to be unregistered. 292 */ 293 void rte_pci_unregister(struct rte_pci_driver *driver); 294 295 /** 296 * Read PCI config space. 297 * 298 * @param device 299 * A pointer to a rte_pci_device structure describing the device 300 * to use 301 * @param buf 302 * A data buffer where the bytes should be read into 303 * @param len 304 * The length of the data buffer. 305 * @param offset 306 * The offset into PCI config space 307 * @return 308 * Number of bytes read on success, negative on error. 309 */ 310 int rte_pci_read_config(const struct rte_pci_device *device, 311 void *buf, size_t len, off_t offset); 312 313 /** 314 * Write PCI config space. 315 * 316 * @param device 317 * A pointer to a rte_pci_device structure describing the device 318 * to use 319 * @param buf 320 * A data buffer containing the bytes should be written 321 * @param len 322 * The length of the data buffer. 323 * @param offset 324 * The offset into PCI config space 325 */ 326 int rte_pci_write_config(const struct rte_pci_device *device, 327 const void *buf, size_t len, off_t offset); 328 329 /** 330 * A structure used to access io resources for a pci device. 331 * rte_pci_ioport is arch, os, driver specific, and should not be used outside 332 * of pci ioport api. 333 */ 334 struct rte_pci_ioport { 335 struct rte_pci_device *dev; 336 uint64_t base; 337 uint64_t len; /* only filled for memory mapped ports */ 338 }; 339 340 /** 341 * Initialize a rte_pci_ioport object for a pci device io resource. 342 * 343 * This object is then used to gain access to those io resources (see below). 344 * 345 * @param dev 346 * A pointer to a rte_pci_device structure describing the device 347 * to use. 348 * @param bar 349 * Index of the io pci resource we want to access. 350 * @param p 351 * The rte_pci_ioport object to be initialized. 352 * @return 353 * 0 on success, negative on error. 354 */ 355 int rte_pci_ioport_map(struct rte_pci_device *dev, int bar, 356 struct rte_pci_ioport *p); 357 358 /** 359 * Release any resources used in a rte_pci_ioport object. 360 * 361 * @param p 362 * The rte_pci_ioport object to be uninitialized. 363 * @return 364 * 0 on success, negative on error. 365 */ 366 int rte_pci_ioport_unmap(struct rte_pci_ioport *p); 367 368 /** 369 * Read from a io pci resource. 370 * 371 * @param p 372 * The rte_pci_ioport object from which we want to read. 373 * @param data 374 * A data buffer where the bytes should be read into 375 * @param len 376 * The length of the data buffer. 377 * @param offset 378 * The offset into the pci io resource. 379 */ 380 void rte_pci_ioport_read(struct rte_pci_ioport *p, 381 void *data, size_t len, off_t offset); 382 383 /** 384 * Write to a io pci resource. 385 * 386 * @param p 387 * The rte_pci_ioport object to which we want to write. 388 * @param data 389 * A data buffer where the bytes should be read into 390 * @param len 391 * The length of the data buffer. 392 * @param offset 393 * The offset into the pci io resource. 394 */ 395 void rte_pci_ioport_write(struct rte_pci_ioport *p, 396 const void *data, size_t len, off_t offset); 397 398 #ifdef __cplusplus 399 } 400 #endif 401 402 #endif /* _RTE_BUS_PCI_H_ */ 403