xref: /plan9-contrib/sys/src/9/loongson/io.h (revision a81c3ea0c7f009a3088ab7fe55ea9013d9d77a74)

enum {
	Mhz		= 1000*1000,
};

/*
 *  duarts, frequency and registers
 */
#define DUARTFREQ	1843200

/*
 *  interrupt levels on CPU boards.
 */
enum
{
	ILmin		= 2,
	ILpci		= 2,
	ILunused3	= 3,
	ILduart0	= 4,
	IL8259		= 5,
	ILperf		= 6,
	ILclock		= 7,
	ILmax		= 7,

	ILshift		= 8,
};

/*
 * PCI configuration regesters and interrupt bits
 */
#define Reset			(ulong*)(PCICFG+0x104)
#define 	Rstcpucold	(1<<2)		/* cpu cold reset */

#define Pcimapcfg		(ulong*)(PCICFG+0x118)
#define Pciintrsts		(ulong*)(PCICFG+0x13c)
#define Pciintren		(ulong*)(PCICFG+0x138)
#define Pciintrenset	(ulong*)(PCICFG+0x130)
#define Pciintrenclr	(ulong*)(PCICFG+0x134)

#define Pciintrbase		25

/*
 * i8259 interrupts
 */
enum {
	IrqCLOCK	= 0,
	IrqKBD		= 1,
	IrqUART1	= 3,
	IrqUART0	= 4,
	IrqPCMCIA	= 5,
	IrqFLOPPY	= 6,
	IrqLPT		= 7,
	IrqIRQ7		= 7,
	IrqAUX		= 12,		/* PS/2 port */
	IrqIRQ13	= 13,		/* coprocessor on 386 */
	IrqATA0		= 14,
	IrqATA1		= 15,
	MaxIrqPIC	= 15,

	VectorPIC	= 0,
	MaxVectorPIC	= VectorPIC+MaxIrqPIC,
};


/*
 * mostly PCI from here on
 */

typedef struct Pcisiz Pcisiz;
typedef struct Pcidev Pcidev;
typedef struct Vctl Vctl;

struct Vctl {
	Vctl*	next;			/* handlers on this vector */

	char	name[KNAMELEN];		/* of driver */
	int	isintr;			/* interrupt or fault/trap */
	int	irq;
	int	tbdf;
	int	(*isr)(int);		/* get isr bit for this irq */
	int	(*eoi)(int);		/* eoi */

	void	(*f)(Ureg*, void*);	/* handler to call */
	void*	a;			/* argument to call it with */
};

enum {
	BusCBUS		= 0,		/* Corollary CBUS */
	BusCBUSII,			/* Corollary CBUS II */
	BusEISA,			/* Extended ISA */
	BusFUTURE,			/* IEEE Futurebus */
	BusINTERN,			/* Internal bus */
	BusISA,				/* Industry Standard Architecture */
	BusMBI,				/* Multibus I */
	BusMBII,			/* Multibus II */
	BusMCA,				/* Micro Channel Architecture */
	BusMPI,				/* MPI */
	BusMPSA,			/* MPSA */
	BusNUBUS,			/* Apple Macintosh NuBus */
	BusPCI,				/* Peripheral Component Interconnect */
	BusPCMCIA,			/* PC Memory Card International Association */
	BusTC,				/* DEC TurboChannel */
	BusVL,				/* VESA Local bus */
	BusVME,				/* VMEbus */
	BusXPRESS,			/* Express System Bus */
};

#define MKBUS(t,b,d,f)	(((t)<<24)|(((b)&0xFF)<<16)|(((d)&0x1F)<<11)|(((f)&0x07)<<8))
#define BUSFNO(tbdf)	(((tbdf)>>8)&0x07)
#define BUSDNO(tbdf)	(((tbdf)>>11)&0x1F)
#define BUSBNO(tbdf)	(((tbdf)>>16)&0xFF)
#define BUSTYPE(tbdf)	((tbdf)>>24)
#define BUSBDF(tbdf)	((tbdf)&0x00FFFF00)
#define BUSUNKNOWN	(-1)

enum {
	MaxEISA		= 16,
	CfgEISA		= 0xC80,
};

/*
 * PCI support code.
 */
enum {					/* type 0 & type 1 pre-defined header */
	PciVID		= 0x00,		/* vendor ID */
	PciDID		= 0x02,		/* device ID */
	PciPCR		= 0x04,		/* command */
	PciPSR		= 0x06,		/* status */
	PciRID		= 0x08,		/* revision ID */
	PciCCRp		= 0x09,		/* programming interface class code */
	PciCCRu		= 0x0A,		/* sub-class code */
	PciCCRb		= 0x0B,		/* base class code */
	PciCLS		= 0x0C,		/* cache line size */
	PciLTR		= 0x0D,		/* latency timer */
	PciHDT		= 0x0E,		/* header type */
	PciBST		= 0x0F,		/* BIST */

	PciBAR0		= 0x10,		/* base address */
	PciBAR1		= 0x14,

	PciINTL		= 0x3C,		/* interrupt line */
	PciINTP		= 0x3D,		/* interrupt pin */
};

/* ccrb (base class code) values; controller types */
enum {
	Pcibcpci1	= 0,		/* pci 1.0; no class codes defined */
	Pcibcstore	= 1,		/* mass storage */
	Pcibcnet	= 2,		/* network */
	Pcibcdisp	= 3,		/* display */
	Pcibcmmedia	= 4,		/* multimedia */
	Pcibcmem	= 5,		/* memory */
	Pcibcbridge	= 6,		/* bridge */
	Pcibccomm	= 7,		/* simple comms (e.g., serial) */
	Pcibcbasesys	= 8,		/* base system */
	Pcibcinput	= 9,		/* input */
	Pcibcdock	= 0xa,		/* docking stations */
	Pcibcproc	= 0xb,		/* processors */
	Pcibcserial	= 0xc,		/* serial bus (e.g., USB) */
	Pcibcwireless	= 0xd,		/* wireless */
	Pcibcintell	= 0xe,		/* intelligent i/o */
	Pcibcsatcom	= 0xf,		/* satellite comms */
	Pcibccrypto	= 0x10,		/* encryption/decryption */
	Pcibcdacq	= 0x11,		/* data acquisition & signal proc. */
};

/* ccru (sub-class code) values; common cases only */
enum {
	/* mass storage */
	Pciscscsi	= 0,		/* SCSI */
	Pciscide	= 1,		/* IDE (ATA) */
	Pciscsata	= 6,		/* SATA */

	/* network */
	Pciscether	= 0,		/* Ethernet */

	/* display */
	Pciscvga	= 0,		/* VGA */
	Pciscxga	= 1,		/* XGA */
	Pcisc3d		= 2,		/* 3D */

	/* bridges */
	Pcischostpci	= 0,		/* host/pci */
	Pciscpcicpci	= 1,		/* pci/pci */

	/* simple comms */
	Pciscserial	= 0,		/* 16450, etc. */
	Pciscmultiser	= 1,		/* multiport serial */

	/* serial bus */
	Pciscusb	= 3,		/* USB */
};

enum {					/* type 0 pre-defined header */
	PciCIS		= 0x28,		/* cardbus CIS pointer */
	PciSVID		= 0x2C,		/* subsystem vendor ID */
	PciSID		= 0x2E,		/* cardbus CIS pointer */
	PciEBAR0	= 0x30,		/* expansion ROM base address */
	PciMGNT		= 0x3E,		/* burst period length */
	PciMLT		= 0x3F,		/* maximum latency between bursts */
};

enum {					/* type 1 pre-defined header */
	PciPBN		= 0x18,		/* primary bus number */
	PciSBN		= 0x19,		/* secondary bus number */
	PciUBN		= 0x1A,		/* subordinate bus number */
	PciSLTR		= 0x1B,		/* secondary latency timer */
	PciIBR		= 0x1C,		/* I/O base */
	PciILR		= 0x1D,		/* I/O limit */
	PciSPSR		= 0x1E,		/* secondary status */
	PciMBR		= 0x20,		/* memory base */
	PciMLR		= 0x22,		/* memory limit */
	PciPMBR		= 0x24,		/* prefetchable memory base */
	PciPMLR		= 0x26,		/* prefetchable memory limit */
	PciPUBR		= 0x28,		/* prefetchable base upper 32 bits */
	PciPULR		= 0x2C,		/* prefetchable limit upper 32 bits */
	PciIUBR		= 0x30,		/* I/O base upper 16 bits */
	PciIULR		= 0x32,		/* I/O limit upper 16 bits */
	PciEBAR1	= 0x28,		/* expansion ROM base address */
	PciBCR		= 0x3E,		/* bridge control register */
};

enum {					/* type 2 pre-defined header */
	PciCBExCA	= 0x10,
	PciCBSPSR	= 0x16,
	PciCBPBN	= 0x18,		/* primary bus number */
	PciCBSBN	= 0x19,		/* secondary bus number */
	PciCBUBN	= 0x1A,		/* subordinate bus number */
	PciCBSLTR	= 0x1B,		/* secondary latency timer */
	PciCBMBR0	= 0x1C,
	PciCBMLR0	= 0x20,
	PciCBMBR1	= 0x24,
	PciCBMLR1	= 0x28,
	PciCBIBR0	= 0x2C,		/* I/O base */
	PciCBILR0	= 0x30,		/* I/O limit */
	PciCBIBR1	= 0x34,		/* I/O base */
	PciCBILR1	= 0x38,		/* I/O limit */
	PciCBSVID	= 0x40,		/* subsystem vendor ID */
	PciCBSID	= 0x42,		/* subsystem ID */
	PciCBLMBAR	= 0x44,		/* legacy mode base address */
};

struct Pcisiz
{
	Pcidev*	dev;
	int	siz;
	int	bar;
};

struct Pcidev
{
	int	tbdf;			/* type+bus+device+function */
	ushort	vid;			/* vendor ID */
	ushort	did;			/* device ID */

	ushort	pcr;

	uchar	rid;
	uchar	ccrp;
	uchar	ccru;
	uchar	ccrb;
	uchar	cls;
	uchar	ltr;

	struct {
		ulong	bar;		/* base address */
		int	size;
	} mem[6];

	struct {
		ulong	bar;
		int	size;
	} rom;
	uchar	intl;			/* interrupt line */
	uchar	intp;			/* interrupt pin */

	Pcidev*	list;
	Pcidev*	link;			/* next device on this bno */

	Pcidev*	bridge;			/* down a bus */
	struct {
		ulong	bar;
		int	size;
	} ioa, mema;

	int	pmrb;			/* power management register block */
};

enum {
	/* vendor ids */
	Vatiamd	= 0x1002,
	Vintel	= 0x8086,
	Vjmicron= 0x197b,
	Vmarvell= 0x1b4b,
	Vmyricom= 0x14c1,
	Vrtl	= 0x10ec,
	Vsm		= 0x126f,
};

#define PCIWINDOW	0x80000000
#define PCIWADDR(va)	(PADDR(va)+PCIWINDOW)
#define ISAWINDOW	0
#define ISAWADDR(va)	(PADDR(va)+ISAWINDOW)

#define PCIMEMADDR(pa)	((pa)|PCIMEM)

/* SMBus transactions */
enum
{
	SMBquick,		/* sends address only */

	/* write */
	SMBsend,		/* sends address and cmd */
	SMBbytewrite,		/* sends address and cmd and 1 byte */
	SMBwordwrite,		/* sends address and cmd and 2 bytes */

	/* read */
	SMBrecv,		/* sends address, recvs 1 byte */
	SMBbyteread,		/* sends address and cmd, recv's byte */
	SMBwordread,		/* sends address and cmd, recv's 2 bytes */
};

typedef struct SMBus SMBus;
struct SMBus {
	QLock;		/* mutex */
	Rendez	r;	/* rendezvous point for completion interrupts */
	void	*arg;	/* implementation dependent */
	ulong	base;	/* port or memory base of smbus */
	int	busy;
	void	(*transact)(SMBus*, int, int, int, uchar*);
};

#pragma varargck	type	"T"	int
#pragma varargck	type	"T"	uint