1 /* 2 * Author: Tatu Ylonen <ylo@cs.hut.fi> 3 * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland 4 * All rights reserved 5 * This file contains functions for generic socket connection forwarding. 6 * There is also code for initiating connection forwarding for X11 connections, 7 * arbitrary tcp/ip connections, and the authentication agent connection. 8 * 9 * As far as I am concerned, the code I have written for this software 10 * can be used freely for any purpose. Any derived versions of this 11 * software must be clearly marked as such, and if the derived work is 12 * incompatible with the protocol description in the RFC file, it must be 13 * called by a name other than "ssh" or "Secure Shell". 14 * 15 * SSH2 support added by Markus Friedl. 16 * Copyright (c) 1999, 2000, 2001 Markus Friedl. All rights reserved. 17 * Copyright (c) 1999 Dug Song. All rights reserved. 18 * Copyright (c) 1999 Theo de Raadt. All rights reserved. 19 * 20 * Redistribution and use in source and binary forms, with or without 21 * modification, are permitted provided that the following conditions 22 * are met: 23 * 1. Redistributions of source code must retain the above copyright 24 * notice, this list of conditions and the following disclaimer. 25 * 2. Redistributions in binary form must reproduce the above copyright 26 * notice, this list of conditions and the following disclaimer in the 27 * documentation and/or other materials provided with the distribution. 28 * 29 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 30 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 31 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 32 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 33 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 34 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 35 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 36 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 37 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 38 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 39 */ 40 41 #include "includes.h" 42 RCSID("$OpenBSD: channels.c,v 1.134 2001/09/17 21:04:01 markus Exp $"); 43 44 #include "ssh.h" 45 #include "ssh1.h" 46 #include "ssh2.h" 47 #include "packet.h" 48 #include "xmalloc.h" 49 #include "uidswap.h" 50 #include "log.h" 51 #include "misc.h" 52 #include "channels.h" 53 #include "compat.h" 54 #include "canohost.h" 55 #include "key.h" 56 #include "authfd.h" 57 58 59 /* -- channel core */ 60 61 /* 62 * Pointer to an array containing all allocated channels. The array is 63 * dynamically extended as needed. 64 */ 65 static Channel **channels = NULL; 66 67 /* 68 * Size of the channel array. All slots of the array must always be 69 * initialized (at least the type field); unused slots set to NULL 70 */ 71 static int channels_alloc = 0; 72 73 /* 74 * Maximum file descriptor value used in any of the channels. This is 75 * updated in channel_new. 76 */ 77 static int channel_max_fd = 0; 78 79 80 /* -- tcp forwarding */ 81 82 /* 83 * Data structure for storing which hosts are permitted for forward requests. 84 * The local sides of any remote forwards are stored in this array to prevent 85 * a corrupt remote server from accessing arbitrary TCP/IP ports on our local 86 * network (which might be behind a firewall). 87 */ 88 typedef struct { 89 char *host_to_connect; /* Connect to 'host'. */ 90 u_short port_to_connect; /* Connect to 'port'. */ 91 u_short listen_port; /* Remote side should listen port number. */ 92 } ForwardPermission; 93 94 /* List of all permitted host/port pairs to connect. */ 95 static ForwardPermission permitted_opens[SSH_MAX_FORWARDS_PER_DIRECTION]; 96 97 /* Number of permitted host/port pairs in the array. */ 98 static int num_permitted_opens = 0; 99 /* 100 * If this is true, all opens are permitted. This is the case on the server 101 * on which we have to trust the client anyway, and the user could do 102 * anything after logging in anyway. 103 */ 104 static int all_opens_permitted = 0; 105 106 107 /* -- X11 forwarding */ 108 109 /* Maximum number of fake X11 displays to try. */ 110 #define MAX_DISPLAYS 1000 111 112 /* Saved X11 authentication protocol name. */ 113 static char *x11_saved_proto = NULL; 114 115 /* Saved X11 authentication data. This is the real data. */ 116 static char *x11_saved_data = NULL; 117 static u_int x11_saved_data_len = 0; 118 119 /* 120 * Fake X11 authentication data. This is what the server will be sending us; 121 * we should replace any occurrences of this by the real data. 122 */ 123 static char *x11_fake_data = NULL; 124 static u_int x11_fake_data_len; 125 126 127 /* -- agent forwarding */ 128 129 #define NUM_SOCKS 10 130 131 /* Name and directory of socket for authentication agent forwarding. */ 132 static char *auth_sock_name = NULL; 133 static char *auth_sock_dir = NULL; 134 135 /* AF_UNSPEC or AF_INET or AF_INET6 */ 136 extern int IPv4or6; 137 138 /* helper */ 139 static void port_open_helper(Channel *c, char *rtype); 140 141 /* -- channel core */ 142 143 Channel * 144 channel_lookup(int id) 145 { 146 Channel *c; 147 148 if (id < 0 || id > channels_alloc) { 149 log("channel_lookup: %d: bad id", id); 150 return NULL; 151 } 152 c = channels[id]; 153 if (c == NULL) { 154 log("channel_lookup: %d: bad id: channel free", id); 155 return NULL; 156 } 157 return c; 158 } 159 160 /* 161 * Register filedescriptors for a channel, used when allocating a channel or 162 * when the channel consumer/producer is ready, e.g. shell exec'd 163 */ 164 165 static void 166 channel_register_fds(Channel *c, int rfd, int wfd, int efd, 167 int extusage, int nonblock) 168 { 169 /* Update the maximum file descriptor value. */ 170 channel_max_fd = MAX(channel_max_fd, rfd); 171 channel_max_fd = MAX(channel_max_fd, wfd); 172 channel_max_fd = MAX(channel_max_fd, efd); 173 174 /* XXX set close-on-exec -markus */ 175 176 c->rfd = rfd; 177 c->wfd = wfd; 178 c->sock = (rfd == wfd) ? rfd : -1; 179 c->efd = efd; 180 c->extended_usage = extusage; 181 182 /* XXX ugly hack: nonblock is only set by the server */ 183 if (nonblock && isatty(c->rfd)) { 184 debug("channel %d: rfd %d isatty", c->self, c->rfd); 185 c->isatty = 1; 186 if (!isatty(c->wfd)) { 187 error("channel %d: wfd %d is not a tty?", 188 c->self, c->wfd); 189 } 190 } else { 191 c->isatty = 0; 192 } 193 194 /* enable nonblocking mode */ 195 if (nonblock) { 196 if (rfd != -1) 197 set_nonblock(rfd); 198 if (wfd != -1) 199 set_nonblock(wfd); 200 if (efd != -1) 201 set_nonblock(efd); 202 } 203 } 204 205 /* 206 * Allocate a new channel object and set its type and socket. This will cause 207 * remote_name to be freed. 208 */ 209 210 Channel * 211 channel_new(char *ctype, int type, int rfd, int wfd, int efd, 212 int window, int maxpack, int extusage, char *remote_name, int nonblock) 213 { 214 int i, found; 215 Channel *c; 216 217 /* Do initial allocation if this is the first call. */ 218 if (channels_alloc == 0) { 219 chan_init(); 220 channels_alloc = 10; 221 channels = xmalloc(channels_alloc * sizeof(Channel *)); 222 for (i = 0; i < channels_alloc; i++) 223 channels[i] = NULL; 224 fatal_add_cleanup((void (*) (void *)) channel_free_all, NULL); 225 } 226 /* Try to find a free slot where to put the new channel. */ 227 for (found = -1, i = 0; i < channels_alloc; i++) 228 if (channels[i] == NULL) { 229 /* Found a free slot. */ 230 found = i; 231 break; 232 } 233 if (found == -1) { 234 /* There are no free slots. Take last+1 slot and expand the array. */ 235 found = channels_alloc; 236 channels_alloc += 10; 237 debug2("channel: expanding %d", channels_alloc); 238 channels = xrealloc(channels, channels_alloc * sizeof(Channel *)); 239 for (i = found; i < channels_alloc; i++) 240 channels[i] = NULL; 241 } 242 /* Initialize and return new channel. */ 243 c = channels[found] = xmalloc(sizeof(Channel)); 244 buffer_init(&c->input); 245 buffer_init(&c->output); 246 buffer_init(&c->extended); 247 chan_init_iostates(c); 248 channel_register_fds(c, rfd, wfd, efd, extusage, nonblock); 249 c->self = found; 250 c->type = type; 251 c->ctype = ctype; 252 c->local_window = window; 253 c->local_window_max = window; 254 c->local_consumed = 0; 255 c->local_maxpacket = maxpack; 256 c->remote_id = -1; 257 c->remote_name = remote_name; 258 c->remote_window = 0; 259 c->remote_maxpacket = 0; 260 c->cb_fn = NULL; 261 c->cb_arg = NULL; 262 c->cb_event = 0; 263 c->force_drain = 0; 264 c->detach_user = NULL; 265 c->input_filter = NULL; 266 debug("channel %d: new [%s]", found, remote_name); 267 return c; 268 } 269 270 static int 271 channel_find_maxfd(void) 272 { 273 int i, max = 0; 274 Channel *c; 275 276 for (i = 0; i < channels_alloc; i++) { 277 c = channels[i]; 278 if (c != NULL) { 279 max = MAX(max, c->rfd); 280 max = MAX(max, c->wfd); 281 max = MAX(max, c->efd); 282 } 283 } 284 return max; 285 } 286 287 int 288 channel_close_fd(int *fdp) 289 { 290 int ret = 0, fd = *fdp; 291 292 if (fd != -1) { 293 ret = close(fd); 294 *fdp = -1; 295 if (fd == channel_max_fd) 296 channel_max_fd = channel_find_maxfd(); 297 } 298 return ret; 299 } 300 301 /* Close all channel fd/socket. */ 302 303 static void 304 channel_close_fds(Channel *c) 305 { 306 debug3("channel_close_fds: channel %d: r %d w %d e %d", 307 c->self, c->rfd, c->wfd, c->efd); 308 309 channel_close_fd(&c->sock); 310 channel_close_fd(&c->rfd); 311 channel_close_fd(&c->wfd); 312 channel_close_fd(&c->efd); 313 } 314 315 /* Free the channel and close its fd/socket. */ 316 317 void 318 channel_free(Channel *c) 319 { 320 char *s; 321 int i, n; 322 323 for (n = 0, i = 0; i < channels_alloc; i++) 324 if (channels[i]) 325 n++; 326 debug("channel_free: channel %d: %s, nchannels %d", c->self, 327 c->remote_name ? c->remote_name : "???", n); 328 329 s = channel_open_message(); 330 debug3("channel_free: status: %s", s); 331 xfree(s); 332 333 if (c->detach_user != NULL) { 334 debug("channel_free: channel %d: detaching channel user", c->self); 335 c->detach_user(c->self, NULL); 336 } 337 if (c->sock != -1) 338 shutdown(c->sock, SHUT_RDWR); 339 channel_close_fds(c); 340 buffer_free(&c->input); 341 buffer_free(&c->output); 342 buffer_free(&c->extended); 343 if (c->remote_name) { 344 xfree(c->remote_name); 345 c->remote_name = NULL; 346 } 347 channels[c->self] = NULL; 348 xfree(c); 349 } 350 351 void 352 channel_free_all(void) 353 { 354 int i; 355 356 for (i = 0; i < channels_alloc; i++) 357 if (channels[i] != NULL) 358 channel_free(channels[i]); 359 } 360 361 void 362 channel_detach_all(void) 363 { 364 int i; 365 Channel *c; 366 367 for (i = 0; i < channels_alloc; i++) { 368 c = channels[i]; 369 if (c != NULL && c->detach_user != NULL) { 370 debug("channel_detach_all: channel %d", c->self); 371 c->detach_user(c->self, NULL); 372 c->detach_user = NULL; 373 } 374 } 375 } 376 377 /* 378 * Closes the sockets/fds of all channels. This is used to close extra file 379 * descriptors after a fork. 380 */ 381 382 void 383 channel_close_all() 384 { 385 int i; 386 387 for (i = 0; i < channels_alloc; i++) 388 if (channels[i] != NULL) 389 channel_close_fds(channels[i]); 390 } 391 392 /* 393 * Stop listening to channels. 394 */ 395 396 void 397 channel_stop_listening(void) 398 { 399 int i; 400 Channel *c; 401 402 for (i = 0; i < channels_alloc; i++) { 403 c = channels[i]; 404 if (c != NULL) { 405 switch (c->type) { 406 case SSH_CHANNEL_AUTH_SOCKET: 407 case SSH_CHANNEL_PORT_LISTENER: 408 case SSH_CHANNEL_RPORT_LISTENER: 409 case SSH_CHANNEL_X11_LISTENER: 410 channel_close_fd(&c->sock); 411 channel_free(c); 412 break; 413 } 414 } 415 } 416 } 417 418 /* 419 * Returns true if no channel has too much buffered data, and false if one or 420 * more channel is overfull. 421 */ 422 423 int 424 channel_not_very_much_buffered_data() 425 { 426 u_int i; 427 Channel *c; 428 429 for (i = 0; i < channels_alloc; i++) { 430 c = channels[i]; 431 if (c != NULL && c->type == SSH_CHANNEL_OPEN) { 432 if (!compat20 && buffer_len(&c->input) > packet_get_maxsize()) { 433 debug("channel %d: big input buffer %d", 434 c->self, buffer_len(&c->input)); 435 return 0; 436 } 437 if (buffer_len(&c->output) > packet_get_maxsize()) { 438 debug("channel %d: big output buffer %d", 439 c->self, buffer_len(&c->output)); 440 return 0; 441 } 442 } 443 } 444 return 1; 445 } 446 447 /* Returns true if any channel is still open. */ 448 449 int 450 channel_still_open() 451 { 452 int i; 453 Channel *c; 454 455 for (i = 0; i < channels_alloc; i++) { 456 c = channels[i]; 457 if (c == NULL) 458 continue; 459 switch (c->type) { 460 case SSH_CHANNEL_X11_LISTENER: 461 case SSH_CHANNEL_PORT_LISTENER: 462 case SSH_CHANNEL_RPORT_LISTENER: 463 case SSH_CHANNEL_CLOSED: 464 case SSH_CHANNEL_AUTH_SOCKET: 465 case SSH_CHANNEL_DYNAMIC: 466 case SSH_CHANNEL_CONNECTING: 467 case SSH_CHANNEL_ZOMBIE: 468 continue; 469 case SSH_CHANNEL_LARVAL: 470 if (!compat20) 471 fatal("cannot happen: SSH_CHANNEL_LARVAL"); 472 continue; 473 case SSH_CHANNEL_OPENING: 474 case SSH_CHANNEL_OPEN: 475 case SSH_CHANNEL_X11_OPEN: 476 return 1; 477 case SSH_CHANNEL_INPUT_DRAINING: 478 case SSH_CHANNEL_OUTPUT_DRAINING: 479 if (!compat13) 480 fatal("cannot happen: OUT_DRAIN"); 481 return 1; 482 default: 483 fatal("channel_still_open: bad channel type %d", c->type); 484 /* NOTREACHED */ 485 } 486 } 487 return 0; 488 } 489 490 /* Returns the id of an open channel suitable for keepaliving */ 491 492 int 493 channel_find_open() 494 { 495 int i; 496 Channel *c; 497 498 for (i = 0; i < channels_alloc; i++) { 499 c = channels[i]; 500 if (c == NULL) 501 continue; 502 switch (c->type) { 503 case SSH_CHANNEL_CLOSED: 504 case SSH_CHANNEL_DYNAMIC: 505 case SSH_CHANNEL_X11_LISTENER: 506 case SSH_CHANNEL_PORT_LISTENER: 507 case SSH_CHANNEL_RPORT_LISTENER: 508 case SSH_CHANNEL_OPENING: 509 case SSH_CHANNEL_CONNECTING: 510 case SSH_CHANNEL_ZOMBIE: 511 continue; 512 case SSH_CHANNEL_LARVAL: 513 case SSH_CHANNEL_AUTH_SOCKET: 514 case SSH_CHANNEL_OPEN: 515 case SSH_CHANNEL_X11_OPEN: 516 return i; 517 case SSH_CHANNEL_INPUT_DRAINING: 518 case SSH_CHANNEL_OUTPUT_DRAINING: 519 if (!compat13) 520 fatal("cannot happen: OUT_DRAIN"); 521 return i; 522 default: 523 fatal("channel_find_open: bad channel type %d", c->type); 524 /* NOTREACHED */ 525 } 526 } 527 return -1; 528 } 529 530 531 /* 532 * Returns a message describing the currently open forwarded connections, 533 * suitable for sending to the client. The message contains crlf pairs for 534 * newlines. 535 */ 536 537 char * 538 channel_open_message() 539 { 540 Buffer buffer; 541 Channel *c; 542 char buf[1024], *cp; 543 int i; 544 545 buffer_init(&buffer); 546 snprintf(buf, sizeof buf, "The following connections are open:\r\n"); 547 buffer_append(&buffer, buf, strlen(buf)); 548 for (i = 0; i < channels_alloc; i++) { 549 c = channels[i]; 550 if (c == NULL) 551 continue; 552 switch (c->type) { 553 case SSH_CHANNEL_X11_LISTENER: 554 case SSH_CHANNEL_PORT_LISTENER: 555 case SSH_CHANNEL_RPORT_LISTENER: 556 case SSH_CHANNEL_CLOSED: 557 case SSH_CHANNEL_AUTH_SOCKET: 558 case SSH_CHANNEL_ZOMBIE: 559 continue; 560 case SSH_CHANNEL_LARVAL: 561 case SSH_CHANNEL_OPENING: 562 case SSH_CHANNEL_CONNECTING: 563 case SSH_CHANNEL_DYNAMIC: 564 case SSH_CHANNEL_OPEN: 565 case SSH_CHANNEL_X11_OPEN: 566 case SSH_CHANNEL_INPUT_DRAINING: 567 case SSH_CHANNEL_OUTPUT_DRAINING: 568 snprintf(buf, sizeof buf, " #%d %.300s (t%d r%d i%d/%d o%d/%d fd %d/%d)\r\n", 569 c->self, c->remote_name, 570 c->type, c->remote_id, 571 c->istate, buffer_len(&c->input), 572 c->ostate, buffer_len(&c->output), 573 c->rfd, c->wfd); 574 buffer_append(&buffer, buf, strlen(buf)); 575 continue; 576 default: 577 fatal("channel_open_message: bad channel type %d", c->type); 578 /* NOTREACHED */ 579 } 580 } 581 buffer_append(&buffer, "\0", 1); 582 cp = xstrdup(buffer_ptr(&buffer)); 583 buffer_free(&buffer); 584 return cp; 585 } 586 587 void 588 channel_send_open(int id) 589 { 590 Channel *c = channel_lookup(id); 591 if (c == NULL) { 592 log("channel_send_open: %d: bad id", id); 593 return; 594 } 595 debug("send channel open %d", id); 596 packet_start(SSH2_MSG_CHANNEL_OPEN); 597 packet_put_cstring(c->ctype); 598 packet_put_int(c->self); 599 packet_put_int(c->local_window); 600 packet_put_int(c->local_maxpacket); 601 packet_send(); 602 } 603 604 void 605 channel_request(int id, char *service, int wantconfirm) 606 { 607 channel_request_start(id, service, wantconfirm); 608 packet_send(); 609 debug("channel request %d: %s", id, service) ; 610 } 611 void 612 channel_request_start(int id, char *service, int wantconfirm) 613 { 614 Channel *c = channel_lookup(id); 615 if (c == NULL) { 616 log("channel_request: %d: bad id", id); 617 return; 618 } 619 packet_start(SSH2_MSG_CHANNEL_REQUEST); 620 packet_put_int(c->remote_id); 621 packet_put_cstring(service); 622 packet_put_char(wantconfirm); 623 } 624 void 625 channel_register_callback(int id, int mtype, channel_callback_fn *fn, void *arg) 626 { 627 Channel *c = channel_lookup(id); 628 if (c == NULL) { 629 log("channel_register_callback: %d: bad id", id); 630 return; 631 } 632 c->cb_event = mtype; 633 c->cb_fn = fn; 634 c->cb_arg = arg; 635 } 636 void 637 channel_register_cleanup(int id, channel_callback_fn *fn) 638 { 639 Channel *c = channel_lookup(id); 640 if (c == NULL) { 641 log("channel_register_cleanup: %d: bad id", id); 642 return; 643 } 644 c->detach_user = fn; 645 } 646 void 647 channel_cancel_cleanup(int id) 648 { 649 Channel *c = channel_lookup(id); 650 if (c == NULL) { 651 log("channel_cancel_cleanup: %d: bad id", id); 652 return; 653 } 654 c->detach_user = NULL; 655 } 656 void 657 channel_register_filter(int id, channel_filter_fn *fn) 658 { 659 Channel *c = channel_lookup(id); 660 if (c == NULL) { 661 log("channel_register_filter: %d: bad id", id); 662 return; 663 } 664 c->input_filter = fn; 665 } 666 667 void 668 channel_set_fds(int id, int rfd, int wfd, int efd, 669 int extusage, int nonblock) 670 { 671 Channel *c = channel_lookup(id); 672 if (c == NULL || c->type != SSH_CHANNEL_LARVAL) 673 fatal("channel_activate for non-larval channel %d.", id); 674 channel_register_fds(c, rfd, wfd, efd, extusage, nonblock); 675 c->type = SSH_CHANNEL_OPEN; 676 /* XXX window size? */ 677 c->local_window = c->local_window_max = c->local_maxpacket * 2; 678 packet_start(SSH2_MSG_CHANNEL_WINDOW_ADJUST); 679 packet_put_int(c->remote_id); 680 packet_put_int(c->local_window); 681 packet_send(); 682 } 683 684 /* 685 * 'channel_pre*' are called just before select() to add any bits relevant to 686 * channels in the select bitmasks. 687 */ 688 /* 689 * 'channel_post*': perform any appropriate operations for channels which 690 * have events pending. 691 */ 692 typedef void chan_fn(Channel *c, fd_set * readset, fd_set * writeset); 693 chan_fn *channel_pre[SSH_CHANNEL_MAX_TYPE]; 694 chan_fn *channel_post[SSH_CHANNEL_MAX_TYPE]; 695 696 static void 697 channel_pre_listener(Channel *c, fd_set * readset, fd_set * writeset) 698 { 699 FD_SET(c->sock, readset); 700 } 701 702 static void 703 channel_pre_connecting(Channel *c, fd_set * readset, fd_set * writeset) 704 { 705 debug3("channel %d: waiting for connection", c->self); 706 FD_SET(c->sock, writeset); 707 } 708 709 static void 710 channel_pre_open_13(Channel *c, fd_set * readset, fd_set * writeset) 711 { 712 if (buffer_len(&c->input) < packet_get_maxsize()) 713 FD_SET(c->sock, readset); 714 if (buffer_len(&c->output) > 0) 715 FD_SET(c->sock, writeset); 716 } 717 718 static void 719 channel_pre_open_15(Channel *c, fd_set * readset, fd_set * writeset) 720 { 721 /* test whether sockets are 'alive' for read/write */ 722 if (c->istate == CHAN_INPUT_OPEN) 723 if (buffer_len(&c->input) < packet_get_maxsize()) 724 FD_SET(c->sock, readset); 725 if (c->ostate == CHAN_OUTPUT_OPEN || 726 c->ostate == CHAN_OUTPUT_WAIT_DRAIN) { 727 if (buffer_len(&c->output) > 0) { 728 FD_SET(c->sock, writeset); 729 } else if (c->ostate == CHAN_OUTPUT_WAIT_DRAIN) { 730 chan_obuf_empty(c); 731 } 732 } 733 } 734 735 static void 736 channel_pre_open_20(Channel *c, fd_set * readset, fd_set * writeset) 737 { 738 if (c->istate == CHAN_INPUT_OPEN && 739 c->remote_window > 0 && 740 buffer_len(&c->input) < c->remote_window) 741 FD_SET(c->rfd, readset); 742 if (c->ostate == CHAN_OUTPUT_OPEN || 743 c->ostate == CHAN_OUTPUT_WAIT_DRAIN) { 744 if (buffer_len(&c->output) > 0) { 745 FD_SET(c->wfd, writeset); 746 } else if (c->ostate == CHAN_OUTPUT_WAIT_DRAIN) { 747 chan_obuf_empty(c); 748 } 749 } 750 /** XXX check close conditions, too */ 751 if (c->efd != -1) { 752 if (c->extended_usage == CHAN_EXTENDED_WRITE && 753 buffer_len(&c->extended) > 0) 754 FD_SET(c->efd, writeset); 755 else if (c->extended_usage == CHAN_EXTENDED_READ && 756 buffer_len(&c->extended) < c->remote_window) 757 FD_SET(c->efd, readset); 758 } 759 } 760 761 static void 762 channel_pre_input_draining(Channel *c, fd_set * readset, fd_set * writeset) 763 { 764 if (buffer_len(&c->input) == 0) { 765 packet_start(SSH_MSG_CHANNEL_CLOSE); 766 packet_put_int(c->remote_id); 767 packet_send(); 768 c->type = SSH_CHANNEL_CLOSED; 769 debug("channel %d: closing after input drain.", c->self); 770 } 771 } 772 773 static void 774 channel_pre_output_draining(Channel *c, fd_set * readset, fd_set * writeset) 775 { 776 if (buffer_len(&c->output) == 0) 777 chan_mark_dead(c); 778 else 779 FD_SET(c->sock, writeset); 780 } 781 782 /* 783 * This is a special state for X11 authentication spoofing. An opened X11 784 * connection (when authentication spoofing is being done) remains in this 785 * state until the first packet has been completely read. The authentication 786 * data in that packet is then substituted by the real data if it matches the 787 * fake data, and the channel is put into normal mode. 788 * XXX All this happens at the client side. 789 * Returns: 0 = need more data, -1 = wrong cookie, 1 = ok 790 */ 791 static int 792 x11_open_helper(Buffer *b) 793 { 794 u_char *ucp; 795 u_int proto_len, data_len; 796 797 /* Check if the fixed size part of the packet is in buffer. */ 798 if (buffer_len(b) < 12) 799 return 0; 800 801 /* Parse the lengths of variable-length fields. */ 802 ucp = (u_char *) buffer_ptr(b); 803 if (ucp[0] == 0x42) { /* Byte order MSB first. */ 804 proto_len = 256 * ucp[6] + ucp[7]; 805 data_len = 256 * ucp[8] + ucp[9]; 806 } else if (ucp[0] == 0x6c) { /* Byte order LSB first. */ 807 proto_len = ucp[6] + 256 * ucp[7]; 808 data_len = ucp[8] + 256 * ucp[9]; 809 } else { 810 debug("Initial X11 packet contains bad byte order byte: 0x%x", 811 ucp[0]); 812 return -1; 813 } 814 815 /* Check if the whole packet is in buffer. */ 816 if (buffer_len(b) < 817 12 + ((proto_len + 3) & ~3) + ((data_len + 3) & ~3)) 818 return 0; 819 820 /* Check if authentication protocol matches. */ 821 if (proto_len != strlen(x11_saved_proto) || 822 memcmp(ucp + 12, x11_saved_proto, proto_len) != 0) { 823 debug("X11 connection uses different authentication protocol."); 824 return -1; 825 } 826 /* Check if authentication data matches our fake data. */ 827 if (data_len != x11_fake_data_len || 828 memcmp(ucp + 12 + ((proto_len + 3) & ~3), 829 x11_fake_data, x11_fake_data_len) != 0) { 830 debug("X11 auth data does not match fake data."); 831 return -1; 832 } 833 /* Check fake data length */ 834 if (x11_fake_data_len != x11_saved_data_len) { 835 error("X11 fake_data_len %d != saved_data_len %d", 836 x11_fake_data_len, x11_saved_data_len); 837 return -1; 838 } 839 /* 840 * Received authentication protocol and data match 841 * our fake data. Substitute the fake data with real 842 * data. 843 */ 844 memcpy(ucp + 12 + ((proto_len + 3) & ~3), 845 x11_saved_data, x11_saved_data_len); 846 return 1; 847 } 848 849 static void 850 channel_pre_x11_open_13(Channel *c, fd_set * readset, fd_set * writeset) 851 { 852 int ret = x11_open_helper(&c->output); 853 if (ret == 1) { 854 /* Start normal processing for the channel. */ 855 c->type = SSH_CHANNEL_OPEN; 856 channel_pre_open_13(c, readset, writeset); 857 } else if (ret == -1) { 858 /* 859 * We have received an X11 connection that has bad 860 * authentication information. 861 */ 862 log("X11 connection rejected because of wrong authentication."); 863 buffer_clear(&c->input); 864 buffer_clear(&c->output); 865 channel_close_fd(&c->sock); 866 c->sock = -1; 867 c->type = SSH_CHANNEL_CLOSED; 868 packet_start(SSH_MSG_CHANNEL_CLOSE); 869 packet_put_int(c->remote_id); 870 packet_send(); 871 } 872 } 873 874 static void 875 channel_pre_x11_open(Channel *c, fd_set * readset, fd_set * writeset) 876 { 877 int ret = x11_open_helper(&c->output); 878 879 /* c->force_drain = 1; */ 880 881 if (ret == 1) { 882 c->type = SSH_CHANNEL_OPEN; 883 if (compat20) 884 channel_pre_open_20(c, readset, writeset); 885 else 886 channel_pre_open_15(c, readset, writeset); 887 } else if (ret == -1) { 888 debug("X11 rejected %d i%d/o%d", c->self, c->istate, c->ostate); 889 chan_read_failed(c); /** force close? */ 890 chan_write_failed(c); 891 debug("X11 closed %d i%d/o%d", c->self, c->istate, c->ostate); 892 } 893 } 894 895 /* try to decode a socks4 header */ 896 static int 897 channel_decode_socks4(Channel *c, fd_set * readset, fd_set * writeset) 898 { 899 u_char *p, *host; 900 int len, have, i, found; 901 char username[256]; 902 struct { 903 u_int8_t version; 904 u_int8_t command; 905 u_int16_t dest_port; 906 struct in_addr dest_addr; 907 } s4_req, s4_rsp; 908 909 debug2("channel %d: decode socks4", c->self); 910 911 have = buffer_len(&c->input); 912 len = sizeof(s4_req); 913 if (have < len) 914 return 0; 915 p = buffer_ptr(&c->input); 916 for (found = 0, i = len; i < have; i++) { 917 if (p[i] == '\0') { 918 found = 1; 919 break; 920 } 921 if (i > 1024) { 922 /* the peer is probably sending garbage */ 923 debug("channel %d: decode socks4: too long", 924 c->self); 925 return -1; 926 } 927 } 928 if (!found) 929 return 0; 930 buffer_get(&c->input, (char *)&s4_req.version, 1); 931 buffer_get(&c->input, (char *)&s4_req.command, 1); 932 buffer_get(&c->input, (char *)&s4_req.dest_port, 2); 933 buffer_get(&c->input, (char *)&s4_req.dest_addr, 4); 934 have = buffer_len(&c->input); 935 p = buffer_ptr(&c->input); 936 len = strlen(p); 937 debug2("channel %d: decode socks4: user %s/%d", c->self, p, len); 938 if (len > have) 939 fatal("channel %d: decode socks4: len %d > have %d", 940 c->self, len, have); 941 strlcpy(username, p, sizeof(username)); 942 buffer_consume(&c->input, len); 943 buffer_consume(&c->input, 1); /* trailing '\0' */ 944 945 host = inet_ntoa(s4_req.dest_addr); 946 strlcpy(c->path, host, sizeof(c->path)); 947 c->host_port = ntohs(s4_req.dest_port); 948 949 debug("channel %d: dynamic request: socks4 host %s port %u command %u", 950 c->self, host, c->host_port, s4_req.command); 951 952 if (s4_req.command != 1) { 953 debug("channel %d: cannot handle: socks4 cn %d", 954 c->self, s4_req.command); 955 return -1; 956 } 957 s4_rsp.version = 0; /* vn: 0 for reply */ 958 s4_rsp.command = 90; /* cd: req granted */ 959 s4_rsp.dest_port = 0; /* ignored */ 960 s4_rsp.dest_addr.s_addr = INADDR_ANY; /* ignored */ 961 buffer_append(&c->output, (char *)&s4_rsp, sizeof(s4_rsp)); 962 return 1; 963 } 964 965 /* dynamic port forwarding */ 966 static void 967 channel_pre_dynamic(Channel *c, fd_set * readset, fd_set * writeset) 968 { 969 u_char *p; 970 int have, ret; 971 972 have = buffer_len(&c->input); 973 974 debug2("channel %d: pre_dynamic: have %d", c->self, have); 975 /* buffer_dump(&c->input); */ 976 /* check if the fixed size part of the packet is in buffer. */ 977 if (have < 4) { 978 /* need more */ 979 FD_SET(c->sock, readset); 980 return; 981 } 982 /* try to guess the protocol */ 983 p = buffer_ptr(&c->input); 984 switch (p[0]) { 985 case 0x04: 986 ret = channel_decode_socks4(c, readset, writeset); 987 break; 988 default: 989 ret = -1; 990 break; 991 } 992 if (ret < 0) { 993 chan_mark_dead(c); 994 } else if (ret == 0) { 995 debug2("channel %d: pre_dynamic: need more", c->self); 996 /* need more */ 997 FD_SET(c->sock, readset); 998 } else { 999 /* switch to the next state */ 1000 c->type = SSH_CHANNEL_OPENING; 1001 port_open_helper(c, "direct-tcpip"); 1002 } 1003 } 1004 1005 /* This is our fake X11 server socket. */ 1006 static void 1007 channel_post_x11_listener(Channel *c, fd_set * readset, fd_set * writeset) 1008 { 1009 Channel *nc; 1010 struct sockaddr addr; 1011 int newsock; 1012 socklen_t addrlen; 1013 char buf[16384], *remote_ipaddr; 1014 int remote_port; 1015 1016 if (FD_ISSET(c->sock, readset)) { 1017 debug("X11 connection requested."); 1018 addrlen = sizeof(addr); 1019 newsock = accept(c->sock, &addr, &addrlen); 1020 if (newsock < 0) { 1021 error("accept: %.100s", strerror(errno)); 1022 return; 1023 } 1024 remote_ipaddr = get_peer_ipaddr(newsock); 1025 remote_port = get_peer_port(newsock); 1026 snprintf(buf, sizeof buf, "X11 connection from %.200s port %d", 1027 remote_ipaddr, remote_port); 1028 1029 nc = channel_new("accepted x11 socket", 1030 SSH_CHANNEL_OPENING, newsock, newsock, -1, 1031 c->local_window_max, c->local_maxpacket, 1032 0, xstrdup(buf), 1); 1033 if (nc == NULL) { 1034 close(newsock); 1035 xfree(remote_ipaddr); 1036 return; 1037 } 1038 if (compat20) { 1039 packet_start(SSH2_MSG_CHANNEL_OPEN); 1040 packet_put_cstring("x11"); 1041 packet_put_int(nc->self); 1042 packet_put_int(c->local_window_max); 1043 packet_put_int(c->local_maxpacket); 1044 /* originator ipaddr and port */ 1045 packet_put_cstring(remote_ipaddr); 1046 if (datafellows & SSH_BUG_X11FWD) { 1047 debug("ssh2 x11 bug compat mode"); 1048 } else { 1049 packet_put_int(remote_port); 1050 } 1051 packet_send(); 1052 } else { 1053 packet_start(SSH_SMSG_X11_OPEN); 1054 packet_put_int(nc->self); 1055 if (packet_get_protocol_flags() & 1056 SSH_PROTOFLAG_HOST_IN_FWD_OPEN) 1057 packet_put_cstring(buf); 1058 packet_send(); 1059 } 1060 xfree(remote_ipaddr); 1061 } 1062 } 1063 1064 static void 1065 port_open_helper(Channel *c, char *rtype) 1066 { 1067 int direct; 1068 char buf[1024]; 1069 char *remote_ipaddr = get_peer_ipaddr(c->sock); 1070 u_short remote_port = get_peer_port(c->sock); 1071 1072 direct = (strcmp(rtype, "direct-tcpip") == 0); 1073 1074 snprintf(buf, sizeof buf, 1075 "%s: listening port %d for %.100s port %d, " 1076 "connect from %.200s port %d", 1077 rtype, c->listening_port, c->path, c->host_port, 1078 remote_ipaddr, remote_port); 1079 1080 xfree(c->remote_name); 1081 c->remote_name = xstrdup(buf); 1082 1083 if (compat20) { 1084 packet_start(SSH2_MSG_CHANNEL_OPEN); 1085 packet_put_cstring(rtype); 1086 packet_put_int(c->self); 1087 packet_put_int(c->local_window_max); 1088 packet_put_int(c->local_maxpacket); 1089 if (direct) { 1090 /* target host, port */ 1091 packet_put_cstring(c->path); 1092 packet_put_int(c->host_port); 1093 } else { 1094 /* listen address, port */ 1095 packet_put_cstring(c->path); 1096 packet_put_int(c->listening_port); 1097 } 1098 /* originator host and port */ 1099 packet_put_cstring(remote_ipaddr); 1100 packet_put_int(remote_port); 1101 packet_send(); 1102 } else { 1103 packet_start(SSH_MSG_PORT_OPEN); 1104 packet_put_int(c->self); 1105 packet_put_cstring(c->path); 1106 packet_put_int(c->host_port); 1107 if (packet_get_protocol_flags() & 1108 SSH_PROTOFLAG_HOST_IN_FWD_OPEN) 1109 packet_put_cstring(c->remote_name); 1110 packet_send(); 1111 } 1112 xfree(remote_ipaddr); 1113 } 1114 1115 /* 1116 * This socket is listening for connections to a forwarded TCP/IP port. 1117 */ 1118 static void 1119 channel_post_port_listener(Channel *c, fd_set * readset, fd_set * writeset) 1120 { 1121 Channel *nc; 1122 struct sockaddr addr; 1123 int newsock, nextstate; 1124 socklen_t addrlen; 1125 char *rtype; 1126 1127 if (FD_ISSET(c->sock, readset)) { 1128 debug("Connection to port %d forwarding " 1129 "to %.100s port %d requested.", 1130 c->listening_port, c->path, c->host_port); 1131 1132 rtype = (c->type == SSH_CHANNEL_RPORT_LISTENER) ? 1133 "forwarded-tcpip" : "direct-tcpip"; 1134 nextstate = (c->host_port == 0 && 1135 c->type != SSH_CHANNEL_RPORT_LISTENER) ? 1136 SSH_CHANNEL_DYNAMIC : SSH_CHANNEL_OPENING; 1137 1138 addrlen = sizeof(addr); 1139 newsock = accept(c->sock, &addr, &addrlen); 1140 if (newsock < 0) { 1141 error("accept: %.100s", strerror(errno)); 1142 return; 1143 } 1144 nc = channel_new(rtype, 1145 nextstate, newsock, newsock, -1, 1146 c->local_window_max, c->local_maxpacket, 1147 0, xstrdup(rtype), 1); 1148 if (nc == NULL) { 1149 error("channel_post_port_listener: no new channel:"); 1150 close(newsock); 1151 return; 1152 } 1153 nc->listening_port = c->listening_port; 1154 nc->host_port = c->host_port; 1155 strlcpy(nc->path, c->path, sizeof(nc->path)); 1156 1157 if (nextstate != SSH_CHANNEL_DYNAMIC) 1158 port_open_helper(nc, rtype); 1159 } 1160 } 1161 1162 /* 1163 * This is the authentication agent socket listening for connections from 1164 * clients. 1165 */ 1166 static void 1167 channel_post_auth_listener(Channel *c, fd_set * readset, fd_set * writeset) 1168 { 1169 Channel *nc; 1170 char *name; 1171 int newsock; 1172 struct sockaddr addr; 1173 socklen_t addrlen; 1174 1175 if (FD_ISSET(c->sock, readset)) { 1176 addrlen = sizeof(addr); 1177 newsock = accept(c->sock, &addr, &addrlen); 1178 if (newsock < 0) { 1179 error("accept from auth socket: %.100s", strerror(errno)); 1180 return; 1181 } 1182 name = xstrdup("accepted auth socket"); 1183 nc = channel_new("accepted auth socket", 1184 SSH_CHANNEL_OPENING, newsock, newsock, -1, 1185 c->local_window_max, c->local_maxpacket, 1186 0, name, 1); 1187 if (nc == NULL) { 1188 error("channel_post_auth_listener: channel_new failed"); 1189 xfree(name); 1190 close(newsock); 1191 } 1192 if (compat20) { 1193 packet_start(SSH2_MSG_CHANNEL_OPEN); 1194 packet_put_cstring("auth-agent@openssh.com"); 1195 packet_put_int(nc->self); 1196 packet_put_int(c->local_window_max); 1197 packet_put_int(c->local_maxpacket); 1198 } else { 1199 packet_start(SSH_SMSG_AGENT_OPEN); 1200 packet_put_int(nc->self); 1201 } 1202 packet_send(); 1203 } 1204 } 1205 1206 static void 1207 channel_post_connecting(Channel *c, fd_set * readset, fd_set * writeset) 1208 { 1209 int err = 0; 1210 socklen_t sz = sizeof(err); 1211 1212 if (FD_ISSET(c->sock, writeset)) { 1213 if (getsockopt(c->sock, SOL_SOCKET, SO_ERROR, (char *)&err, 1214 &sz) < 0) { 1215 err = errno; 1216 error("getsockopt SO_ERROR failed"); 1217 } 1218 if (err == 0) { 1219 debug("channel %d: connected", c->self); 1220 c->type = SSH_CHANNEL_OPEN; 1221 if (compat20) { 1222 packet_start(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION); 1223 packet_put_int(c->remote_id); 1224 packet_put_int(c->self); 1225 packet_put_int(c->local_window); 1226 packet_put_int(c->local_maxpacket); 1227 } else { 1228 packet_start(SSH_MSG_CHANNEL_OPEN_CONFIRMATION); 1229 packet_put_int(c->remote_id); 1230 packet_put_int(c->self); 1231 } 1232 } else { 1233 debug("channel %d: not connected: %s", 1234 c->self, strerror(err)); 1235 if (compat20) { 1236 packet_start(SSH2_MSG_CHANNEL_OPEN_FAILURE); 1237 packet_put_int(c->remote_id); 1238 packet_put_int(SSH2_OPEN_CONNECT_FAILED); 1239 if (!(datafellows & SSH_BUG_OPENFAILURE)) { 1240 packet_put_cstring(strerror(err)); 1241 packet_put_cstring(""); 1242 } 1243 } else { 1244 packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE); 1245 packet_put_int(c->remote_id); 1246 } 1247 chan_mark_dead(c); 1248 } 1249 packet_send(); 1250 } 1251 } 1252 1253 static int 1254 channel_handle_rfd(Channel *c, fd_set * readset, fd_set * writeset) 1255 { 1256 char buf[16*1024]; 1257 int len; 1258 1259 if (c->rfd != -1 && 1260 FD_ISSET(c->rfd, readset)) { 1261 len = read(c->rfd, buf, sizeof(buf)); 1262 if (len < 0 && (errno == EINTR || errno == EAGAIN)) 1263 return 1; 1264 if (len <= 0) { 1265 debug("channel %d: read<=0 rfd %d len %d", 1266 c->self, c->rfd, len); 1267 if (c->type != SSH_CHANNEL_OPEN) { 1268 debug("channel %d: not open", c->self); 1269 chan_mark_dead(c); 1270 return -1; 1271 } else if (compat13) { 1272 buffer_consume(&c->output, buffer_len(&c->output)); 1273 c->type = SSH_CHANNEL_INPUT_DRAINING; 1274 debug("channel %d: input draining.", c->self); 1275 } else { 1276 chan_read_failed(c); 1277 } 1278 return -1; 1279 } 1280 if(c->input_filter != NULL) { 1281 if (c->input_filter(c, buf, len) == -1) { 1282 debug("channel %d: filter stops", c->self); 1283 chan_read_failed(c); 1284 } 1285 } else { 1286 buffer_append(&c->input, buf, len); 1287 } 1288 } 1289 return 1; 1290 } 1291 static int 1292 channel_handle_wfd(Channel *c, fd_set * readset, fd_set * writeset) 1293 { 1294 struct termios tio; 1295 u_char *data; 1296 u_int dlen; 1297 int len; 1298 1299 /* Send buffered output data to the socket. */ 1300 if (c->wfd != -1 && 1301 FD_ISSET(c->wfd, writeset) && 1302 buffer_len(&c->output) > 0) { 1303 data = buffer_ptr(&c->output); 1304 dlen = buffer_len(&c->output); 1305 len = write(c->wfd, data, dlen); 1306 if (len < 0 && (errno == EINTR || errno == EAGAIN)) 1307 return 1; 1308 if (len <= 0) { 1309 if (c->type != SSH_CHANNEL_OPEN) { 1310 debug("channel %d: not open", c->self); 1311 chan_mark_dead(c); 1312 return -1; 1313 } else if (compat13) { 1314 buffer_consume(&c->output, buffer_len(&c->output)); 1315 debug("channel %d: input draining.", c->self); 1316 c->type = SSH_CHANNEL_INPUT_DRAINING; 1317 } else { 1318 chan_write_failed(c); 1319 } 1320 return -1; 1321 } 1322 if (compat20 && c->isatty && dlen >= 1 && data[0] != '\r') { 1323 if (tcgetattr(c->wfd, &tio) == 0 && 1324 !(tio.c_lflag & ECHO) && (tio.c_lflag & ICANON)) { 1325 /* 1326 * Simulate echo to reduce the impact of 1327 * traffic analysis. We need to match the 1328 * size of a SSH2_MSG_CHANNEL_DATA message 1329 * (4 byte channel id + data) 1330 */ 1331 packet_send_ignore(4 + len); 1332 packet_send(); 1333 } 1334 } 1335 buffer_consume(&c->output, len); 1336 if (compat20 && len > 0) { 1337 c->local_consumed += len; 1338 } 1339 } 1340 return 1; 1341 } 1342 static int 1343 channel_handle_efd(Channel *c, fd_set * readset, fd_set * writeset) 1344 { 1345 char buf[16*1024]; 1346 int len; 1347 1348 /** XXX handle drain efd, too */ 1349 if (c->efd != -1) { 1350 if (c->extended_usage == CHAN_EXTENDED_WRITE && 1351 FD_ISSET(c->efd, writeset) && 1352 buffer_len(&c->extended) > 0) { 1353 len = write(c->efd, buffer_ptr(&c->extended), 1354 buffer_len(&c->extended)); 1355 debug2("channel %d: written %d to efd %d", 1356 c->self, len, c->efd); 1357 if (len < 0 && (errno == EINTR || errno == EAGAIN)) 1358 return 1; 1359 if (len <= 0) { 1360 debug2("channel %d: closing write-efd %d", 1361 c->self, c->efd); 1362 channel_close_fd(&c->efd); 1363 } else { 1364 buffer_consume(&c->extended, len); 1365 c->local_consumed += len; 1366 } 1367 } else if (c->extended_usage == CHAN_EXTENDED_READ && 1368 FD_ISSET(c->efd, readset)) { 1369 len = read(c->efd, buf, sizeof(buf)); 1370 debug2("channel %d: read %d from efd %d", 1371 c->self, len, c->efd); 1372 if (len < 0 && (errno == EINTR || errno == EAGAIN)) 1373 return 1; 1374 if (len <= 0) { 1375 debug2("channel %d: closing read-efd %d", 1376 c->self, c->efd); 1377 channel_close_fd(&c->efd); 1378 } else { 1379 buffer_append(&c->extended, buf, len); 1380 } 1381 } 1382 } 1383 return 1; 1384 } 1385 static int 1386 channel_check_window(Channel *c) 1387 { 1388 if (c->type == SSH_CHANNEL_OPEN && 1389 !(c->flags & (CHAN_CLOSE_SENT|CHAN_CLOSE_RCVD)) && 1390 c->local_window < c->local_window_max/2 && 1391 c->local_consumed > 0) { 1392 packet_start(SSH2_MSG_CHANNEL_WINDOW_ADJUST); 1393 packet_put_int(c->remote_id); 1394 packet_put_int(c->local_consumed); 1395 packet_send(); 1396 debug2("channel %d: window %d sent adjust %d", 1397 c->self, c->local_window, 1398 c->local_consumed); 1399 c->local_window += c->local_consumed; 1400 c->local_consumed = 0; 1401 } 1402 return 1; 1403 } 1404 1405 static void 1406 channel_post_open_1(Channel *c, fd_set * readset, fd_set * writeset) 1407 { 1408 channel_handle_rfd(c, readset, writeset); 1409 channel_handle_wfd(c, readset, writeset); 1410 } 1411 1412 static void 1413 channel_post_open_2(Channel *c, fd_set * readset, fd_set * writeset) 1414 { 1415 channel_handle_rfd(c, readset, writeset); 1416 channel_handle_wfd(c, readset, writeset); 1417 channel_handle_efd(c, readset, writeset); 1418 1419 channel_check_window(c); 1420 } 1421 1422 static void 1423 channel_post_output_drain_13(Channel *c, fd_set * readset, fd_set * writeset) 1424 { 1425 int len; 1426 /* Send buffered output data to the socket. */ 1427 if (FD_ISSET(c->sock, writeset) && buffer_len(&c->output) > 0) { 1428 len = write(c->sock, buffer_ptr(&c->output), 1429 buffer_len(&c->output)); 1430 if (len <= 0) 1431 buffer_consume(&c->output, buffer_len(&c->output)); 1432 else 1433 buffer_consume(&c->output, len); 1434 } 1435 } 1436 1437 static void 1438 channel_handler_init_20(void) 1439 { 1440 channel_pre[SSH_CHANNEL_OPEN] = &channel_pre_open_20; 1441 channel_pre[SSH_CHANNEL_X11_OPEN] = &channel_pre_x11_open; 1442 channel_pre[SSH_CHANNEL_PORT_LISTENER] = &channel_pre_listener; 1443 channel_pre[SSH_CHANNEL_RPORT_LISTENER] = &channel_pre_listener; 1444 channel_pre[SSH_CHANNEL_X11_LISTENER] = &channel_pre_listener; 1445 channel_pre[SSH_CHANNEL_AUTH_SOCKET] = &channel_pre_listener; 1446 channel_pre[SSH_CHANNEL_CONNECTING] = &channel_pre_connecting; 1447 channel_pre[SSH_CHANNEL_DYNAMIC] = &channel_pre_dynamic; 1448 1449 channel_post[SSH_CHANNEL_OPEN] = &channel_post_open_2; 1450 channel_post[SSH_CHANNEL_PORT_LISTENER] = &channel_post_port_listener; 1451 channel_post[SSH_CHANNEL_RPORT_LISTENER] = &channel_post_port_listener; 1452 channel_post[SSH_CHANNEL_X11_LISTENER] = &channel_post_x11_listener; 1453 channel_post[SSH_CHANNEL_AUTH_SOCKET] = &channel_post_auth_listener; 1454 channel_post[SSH_CHANNEL_CONNECTING] = &channel_post_connecting; 1455 channel_post[SSH_CHANNEL_DYNAMIC] = &channel_post_open_2; 1456 } 1457 1458 static void 1459 channel_handler_init_13(void) 1460 { 1461 channel_pre[SSH_CHANNEL_OPEN] = &channel_pre_open_13; 1462 channel_pre[SSH_CHANNEL_X11_OPEN] = &channel_pre_x11_open_13; 1463 channel_pre[SSH_CHANNEL_X11_LISTENER] = &channel_pre_listener; 1464 channel_pre[SSH_CHANNEL_PORT_LISTENER] = &channel_pre_listener; 1465 channel_pre[SSH_CHANNEL_AUTH_SOCKET] = &channel_pre_listener; 1466 channel_pre[SSH_CHANNEL_INPUT_DRAINING] = &channel_pre_input_draining; 1467 channel_pre[SSH_CHANNEL_OUTPUT_DRAINING] = &channel_pre_output_draining; 1468 channel_pre[SSH_CHANNEL_CONNECTING] = &channel_pre_connecting; 1469 channel_pre[SSH_CHANNEL_DYNAMIC] = &channel_pre_dynamic; 1470 1471 channel_post[SSH_CHANNEL_OPEN] = &channel_post_open_1; 1472 channel_post[SSH_CHANNEL_X11_LISTENER] = &channel_post_x11_listener; 1473 channel_post[SSH_CHANNEL_PORT_LISTENER] = &channel_post_port_listener; 1474 channel_post[SSH_CHANNEL_AUTH_SOCKET] = &channel_post_auth_listener; 1475 channel_post[SSH_CHANNEL_OUTPUT_DRAINING] = &channel_post_output_drain_13; 1476 channel_post[SSH_CHANNEL_CONNECTING] = &channel_post_connecting; 1477 channel_post[SSH_CHANNEL_DYNAMIC] = &channel_post_open_1; 1478 } 1479 1480 static void 1481 channel_handler_init_15(void) 1482 { 1483 channel_pre[SSH_CHANNEL_OPEN] = &channel_pre_open_15; 1484 channel_pre[SSH_CHANNEL_X11_OPEN] = &channel_pre_x11_open; 1485 channel_pre[SSH_CHANNEL_X11_LISTENER] = &channel_pre_listener; 1486 channel_pre[SSH_CHANNEL_PORT_LISTENER] = &channel_pre_listener; 1487 channel_pre[SSH_CHANNEL_AUTH_SOCKET] = &channel_pre_listener; 1488 channel_pre[SSH_CHANNEL_CONNECTING] = &channel_pre_connecting; 1489 channel_pre[SSH_CHANNEL_DYNAMIC] = &channel_pre_dynamic; 1490 1491 channel_post[SSH_CHANNEL_X11_LISTENER] = &channel_post_x11_listener; 1492 channel_post[SSH_CHANNEL_PORT_LISTENER] = &channel_post_port_listener; 1493 channel_post[SSH_CHANNEL_AUTH_SOCKET] = &channel_post_auth_listener; 1494 channel_post[SSH_CHANNEL_OPEN] = &channel_post_open_1; 1495 channel_post[SSH_CHANNEL_CONNECTING] = &channel_post_connecting; 1496 channel_post[SSH_CHANNEL_DYNAMIC] = &channel_post_open_1; 1497 } 1498 1499 static void 1500 channel_handler_init(void) 1501 { 1502 int i; 1503 for(i = 0; i < SSH_CHANNEL_MAX_TYPE; i++) { 1504 channel_pre[i] = NULL; 1505 channel_post[i] = NULL; 1506 } 1507 if (compat20) 1508 channel_handler_init_20(); 1509 else if (compat13) 1510 channel_handler_init_13(); 1511 else 1512 channel_handler_init_15(); 1513 } 1514 1515 static void 1516 channel_handler(chan_fn *ftab[], fd_set * readset, fd_set * writeset) 1517 { 1518 static int did_init = 0; 1519 int i; 1520 Channel *c; 1521 1522 if (!did_init) { 1523 channel_handler_init(); 1524 did_init = 1; 1525 } 1526 for (i = 0; i < channels_alloc; i++) { 1527 c = channels[i]; 1528 if (c == NULL) 1529 continue; 1530 if (ftab[c->type] != NULL) 1531 (*ftab[c->type])(c, readset, writeset); 1532 if (chan_is_dead(c)) { 1533 /* 1534 * we have to remove the fd's from the select mask 1535 * before the channels are free'd and the fd's are 1536 * closed 1537 */ 1538 if (c->wfd != -1) 1539 FD_CLR(c->wfd, writeset); 1540 if (c->rfd != -1) 1541 FD_CLR(c->rfd, readset); 1542 if (c->efd != -1) { 1543 if (c->extended_usage == CHAN_EXTENDED_READ) 1544 FD_CLR(c->efd, readset); 1545 if (c->extended_usage == CHAN_EXTENDED_WRITE) 1546 FD_CLR(c->efd, writeset); 1547 } 1548 channel_free(c); 1549 } 1550 } 1551 } 1552 1553 /* 1554 * Allocate/update select bitmasks and add any bits relevant to channels in 1555 * select bitmasks. 1556 */ 1557 void 1558 channel_prepare_select(fd_set **readsetp, fd_set **writesetp, int *maxfdp, 1559 int *nallocp, int rekeying) 1560 { 1561 int n; 1562 u_int sz; 1563 1564 n = MAX(*maxfdp, channel_max_fd); 1565 1566 sz = howmany(n+1, NFDBITS) * sizeof(fd_mask); 1567 /* perhaps check sz < nalloc/2 and shrink? */ 1568 if (*readsetp == NULL || sz > *nallocp) { 1569 *readsetp = xrealloc(*readsetp, sz); 1570 *writesetp = xrealloc(*writesetp, sz); 1571 *nallocp = sz; 1572 } 1573 *maxfdp = n; 1574 memset(*readsetp, 0, sz); 1575 memset(*writesetp, 0, sz); 1576 1577 if (!rekeying) 1578 channel_handler(channel_pre, *readsetp, *writesetp); 1579 } 1580 1581 /* 1582 * After select, perform any appropriate operations for channels which have 1583 * events pending. 1584 */ 1585 void 1586 channel_after_select(fd_set * readset, fd_set * writeset) 1587 { 1588 channel_handler(channel_post, readset, writeset); 1589 } 1590 1591 1592 /* If there is data to send to the connection, enqueue some of it now. */ 1593 1594 void 1595 channel_output_poll() 1596 { 1597 int len, i; 1598 Channel *c; 1599 1600 for (i = 0; i < channels_alloc; i++) { 1601 c = channels[i]; 1602 if (c == NULL) 1603 continue; 1604 1605 /* 1606 * We are only interested in channels that can have buffered 1607 * incoming data. 1608 */ 1609 if (compat13) { 1610 if (c->type != SSH_CHANNEL_OPEN && 1611 c->type != SSH_CHANNEL_INPUT_DRAINING) 1612 continue; 1613 } else { 1614 if (c->type != SSH_CHANNEL_OPEN) 1615 continue; 1616 } 1617 if (compat20 && 1618 (c->flags & (CHAN_CLOSE_SENT|CHAN_CLOSE_RCVD))) { 1619 /* XXX is this true? */ 1620 debug2("channel %d: no data after CLOSE", c->self); 1621 continue; 1622 } 1623 1624 /* Get the amount of buffered data for this channel. */ 1625 if ((c->istate == CHAN_INPUT_OPEN || 1626 c->istate == CHAN_INPUT_WAIT_DRAIN) && 1627 (len = buffer_len(&c->input)) > 0) { 1628 /* 1629 * Send some data for the other side over the secure 1630 * connection. 1631 */ 1632 if (compat20) { 1633 if (len > c->remote_window) 1634 len = c->remote_window; 1635 if (len > c->remote_maxpacket) 1636 len = c->remote_maxpacket; 1637 } else { 1638 if (packet_is_interactive()) { 1639 if (len > 1024) 1640 len = 512; 1641 } else { 1642 /* Keep the packets at reasonable size. */ 1643 if (len > packet_get_maxsize()/2) 1644 len = packet_get_maxsize()/2; 1645 } 1646 } 1647 if (len > 0) { 1648 packet_start(compat20 ? 1649 SSH2_MSG_CHANNEL_DATA : SSH_MSG_CHANNEL_DATA); 1650 packet_put_int(c->remote_id); 1651 packet_put_string(buffer_ptr(&c->input), len); 1652 packet_send(); 1653 buffer_consume(&c->input, len); 1654 c->remote_window -= len; 1655 } 1656 } else if (c->istate == CHAN_INPUT_WAIT_DRAIN) { 1657 if (compat13) 1658 fatal("cannot happen: istate == INPUT_WAIT_DRAIN for proto 1.3"); 1659 /* 1660 * input-buffer is empty and read-socket shutdown: 1661 * tell peer, that we will not send more data: send IEOF 1662 */ 1663 chan_ibuf_empty(c); 1664 } 1665 /* Send extended data, i.e. stderr */ 1666 if (compat20 && 1667 c->remote_window > 0 && 1668 (len = buffer_len(&c->extended)) > 0 && 1669 c->extended_usage == CHAN_EXTENDED_READ) { 1670 debug2("channel %d: rwin %d elen %d euse %d", 1671 c->self, c->remote_window, buffer_len(&c->extended), 1672 c->extended_usage); 1673 if (len > c->remote_window) 1674 len = c->remote_window; 1675 if (len > c->remote_maxpacket) 1676 len = c->remote_maxpacket; 1677 packet_start(SSH2_MSG_CHANNEL_EXTENDED_DATA); 1678 packet_put_int(c->remote_id); 1679 packet_put_int(SSH2_EXTENDED_DATA_STDERR); 1680 packet_put_string(buffer_ptr(&c->extended), len); 1681 packet_send(); 1682 buffer_consume(&c->extended, len); 1683 c->remote_window -= len; 1684 debug2("channel %d: sent ext data %d", c->self, len); 1685 } 1686 } 1687 } 1688 1689 1690 /* -- protocol input */ 1691 1692 void 1693 channel_input_data(int type, int plen, void *ctxt) 1694 { 1695 int id; 1696 char *data; 1697 u_int data_len; 1698 Channel *c; 1699 1700 /* Get the channel number and verify it. */ 1701 id = packet_get_int(); 1702 c = channel_lookup(id); 1703 if (c == NULL) 1704 packet_disconnect("Received data for nonexistent channel %d.", id); 1705 1706 /* Ignore any data for non-open channels (might happen on close) */ 1707 if (c->type != SSH_CHANNEL_OPEN && 1708 c->type != SSH_CHANNEL_X11_OPEN) 1709 return; 1710 1711 /* same for protocol 1.5 if output end is no longer open */ 1712 if (!compat13 && c->ostate != CHAN_OUTPUT_OPEN) 1713 return; 1714 1715 /* Get the data. */ 1716 data = packet_get_string(&data_len); 1717 packet_done(); 1718 1719 if (compat20){ 1720 if (data_len > c->local_maxpacket) { 1721 log("channel %d: rcvd big packet %d, maxpack %d", 1722 c->self, data_len, c->local_maxpacket); 1723 } 1724 if (data_len > c->local_window) { 1725 log("channel %d: rcvd too much data %d, win %d", 1726 c->self, data_len, c->local_window); 1727 xfree(data); 1728 return; 1729 } 1730 c->local_window -= data_len; 1731 }else{ 1732 packet_integrity_check(plen, 4 + 4 + data_len, type); 1733 } 1734 buffer_append(&c->output, data, data_len); 1735 xfree(data); 1736 } 1737 1738 void 1739 channel_input_extended_data(int type, int plen, void *ctxt) 1740 { 1741 int id; 1742 int tcode; 1743 char *data; 1744 u_int data_len; 1745 Channel *c; 1746 1747 /* Get the channel number and verify it. */ 1748 id = packet_get_int(); 1749 c = channel_lookup(id); 1750 1751 if (c == NULL) 1752 packet_disconnect("Received extended_data for bad channel %d.", id); 1753 if (c->type != SSH_CHANNEL_OPEN) { 1754 log("channel %d: ext data for non open", id); 1755 return; 1756 } 1757 tcode = packet_get_int(); 1758 if (c->efd == -1 || 1759 c->extended_usage != CHAN_EXTENDED_WRITE || 1760 tcode != SSH2_EXTENDED_DATA_STDERR) { 1761 log("channel %d: bad ext data", c->self); 1762 return; 1763 } 1764 data = packet_get_string(&data_len); 1765 packet_done(); 1766 if (data_len > c->local_window) { 1767 log("channel %d: rcvd too much extended_data %d, win %d", 1768 c->self, data_len, c->local_window); 1769 xfree(data); 1770 return; 1771 } 1772 debug2("channel %d: rcvd ext data %d", c->self, data_len); 1773 c->local_window -= data_len; 1774 buffer_append(&c->extended, data, data_len); 1775 xfree(data); 1776 } 1777 1778 void 1779 channel_input_ieof(int type, int plen, void *ctxt) 1780 { 1781 int id; 1782 Channel *c; 1783 1784 packet_integrity_check(plen, 4, type); 1785 1786 id = packet_get_int(); 1787 c = channel_lookup(id); 1788 if (c == NULL) 1789 packet_disconnect("Received ieof for nonexistent channel %d.", id); 1790 chan_rcvd_ieof(c); 1791 1792 /* XXX force input close */ 1793 if (c->force_drain) { 1794 debug("channel %d: FORCE input drain", c->self); 1795 c->istate = CHAN_INPUT_WAIT_DRAIN; 1796 } 1797 1798 } 1799 1800 void 1801 channel_input_close(int type, int plen, void *ctxt) 1802 { 1803 int id; 1804 Channel *c; 1805 1806 packet_integrity_check(plen, 4, type); 1807 1808 id = packet_get_int(); 1809 c = channel_lookup(id); 1810 if (c == NULL) 1811 packet_disconnect("Received close for nonexistent channel %d.", id); 1812 1813 /* 1814 * Send a confirmation that we have closed the channel and no more 1815 * data is coming for it. 1816 */ 1817 packet_start(SSH_MSG_CHANNEL_CLOSE_CONFIRMATION); 1818 packet_put_int(c->remote_id); 1819 packet_send(); 1820 1821 /* 1822 * If the channel is in closed state, we have sent a close request, 1823 * and the other side will eventually respond with a confirmation. 1824 * Thus, we cannot free the channel here, because then there would be 1825 * no-one to receive the confirmation. The channel gets freed when 1826 * the confirmation arrives. 1827 */ 1828 if (c->type != SSH_CHANNEL_CLOSED) { 1829 /* 1830 * Not a closed channel - mark it as draining, which will 1831 * cause it to be freed later. 1832 */ 1833 buffer_consume(&c->input, buffer_len(&c->input)); 1834 c->type = SSH_CHANNEL_OUTPUT_DRAINING; 1835 } 1836 } 1837 1838 /* proto version 1.5 overloads CLOSE_CONFIRMATION with OCLOSE */ 1839 void 1840 channel_input_oclose(int type, int plen, void *ctxt) 1841 { 1842 int id = packet_get_int(); 1843 Channel *c = channel_lookup(id); 1844 packet_integrity_check(plen, 4, type); 1845 if (c == NULL) 1846 packet_disconnect("Received oclose for nonexistent channel %d.", id); 1847 chan_rcvd_oclose(c); 1848 } 1849 1850 void 1851 channel_input_close_confirmation(int type, int plen, void *ctxt) 1852 { 1853 int id = packet_get_int(); 1854 Channel *c = channel_lookup(id); 1855 1856 packet_done(); 1857 if (c == NULL) 1858 packet_disconnect("Received close confirmation for " 1859 "out-of-range channel %d.", id); 1860 if (c->type != SSH_CHANNEL_CLOSED) 1861 packet_disconnect("Received close confirmation for " 1862 "non-closed channel %d (type %d).", id, c->type); 1863 channel_free(c); 1864 } 1865 1866 void 1867 channel_input_open_confirmation(int type, int plen, void *ctxt) 1868 { 1869 int id, remote_id; 1870 Channel *c; 1871 1872 if (!compat20) 1873 packet_integrity_check(plen, 4 + 4, type); 1874 1875 id = packet_get_int(); 1876 c = channel_lookup(id); 1877 1878 if (c==NULL || c->type != SSH_CHANNEL_OPENING) 1879 packet_disconnect("Received open confirmation for " 1880 "non-opening channel %d.", id); 1881 remote_id = packet_get_int(); 1882 /* Record the remote channel number and mark that the channel is now open. */ 1883 c->remote_id = remote_id; 1884 c->type = SSH_CHANNEL_OPEN; 1885 1886 if (compat20) { 1887 c->remote_window = packet_get_int(); 1888 c->remote_maxpacket = packet_get_int(); 1889 packet_done(); 1890 if (c->cb_fn != NULL && c->cb_event == type) { 1891 debug2("callback start"); 1892 c->cb_fn(c->self, c->cb_arg); 1893 debug2("callback done"); 1894 } 1895 debug("channel %d: open confirm rwindow %d rmax %d", c->self, 1896 c->remote_window, c->remote_maxpacket); 1897 } 1898 } 1899 1900 static char * 1901 reason2txt(int reason) 1902 { 1903 switch(reason) { 1904 case SSH2_OPEN_ADMINISTRATIVELY_PROHIBITED: 1905 return "administratively prohibited"; 1906 case SSH2_OPEN_CONNECT_FAILED: 1907 return "connect failed"; 1908 case SSH2_OPEN_UNKNOWN_CHANNEL_TYPE: 1909 return "unknown channel type"; 1910 case SSH2_OPEN_RESOURCE_SHORTAGE: 1911 return "resource shortage"; 1912 } 1913 return "unknown reason"; 1914 } 1915 1916 void 1917 channel_input_open_failure(int type, int plen, void *ctxt) 1918 { 1919 int id, reason; 1920 char *msg = NULL, *lang = NULL; 1921 Channel *c; 1922 1923 if (!compat20) 1924 packet_integrity_check(plen, 4, type); 1925 1926 id = packet_get_int(); 1927 c = channel_lookup(id); 1928 1929 if (c==NULL || c->type != SSH_CHANNEL_OPENING) 1930 packet_disconnect("Received open failure for " 1931 "non-opening channel %d.", id); 1932 if (compat20) { 1933 reason = packet_get_int(); 1934 if (!(datafellows & SSH_BUG_OPENFAILURE)) { 1935 msg = packet_get_string(NULL); 1936 lang = packet_get_string(NULL); 1937 } 1938 packet_done(); 1939 log("channel %d: open failed: %s%s%s", id, 1940 reason2txt(reason), msg ? ": ": "", msg ? msg : ""); 1941 if (msg != NULL) 1942 xfree(msg); 1943 if (lang != NULL) 1944 xfree(lang); 1945 } 1946 /* Free the channel. This will also close the socket. */ 1947 channel_free(c); 1948 } 1949 1950 void 1951 channel_input_channel_request(int type, int plen, void *ctxt) 1952 { 1953 int id; 1954 Channel *c; 1955 1956 id = packet_get_int(); 1957 c = channel_lookup(id); 1958 1959 if (c == NULL || 1960 (c->type != SSH_CHANNEL_OPEN && c->type != SSH_CHANNEL_LARVAL)) 1961 packet_disconnect("Received request for " 1962 "non-open channel %d.", id); 1963 if (c->cb_fn != NULL && c->cb_event == type) { 1964 debug2("callback start"); 1965 c->cb_fn(c->self, c->cb_arg); 1966 debug2("callback done"); 1967 } else { 1968 char *service = packet_get_string(NULL); 1969 debug("channel %d: rcvd request for %s", c->self, service); 1970 debug("cb_fn %p cb_event %d", c->cb_fn , c->cb_event); 1971 xfree(service); 1972 } 1973 } 1974 1975 void 1976 channel_input_window_adjust(int type, int plen, void *ctxt) 1977 { 1978 Channel *c; 1979 int id, adjust; 1980 1981 if (!compat20) 1982 return; 1983 1984 /* Get the channel number and verify it. */ 1985 id = packet_get_int(); 1986 c = channel_lookup(id); 1987 1988 if (c == NULL || c->type != SSH_CHANNEL_OPEN) { 1989 log("Received window adjust for " 1990 "non-open channel %d.", id); 1991 return; 1992 } 1993 adjust = packet_get_int(); 1994 packet_done(); 1995 debug2("channel %d: rcvd adjust %d", id, adjust); 1996 c->remote_window += adjust; 1997 } 1998 1999 void 2000 channel_input_port_open(int type, int plen, void *ctxt) 2001 { 2002 Channel *c = NULL; 2003 u_short host_port; 2004 char *host, *originator_string; 2005 int remote_id, sock = -1; 2006 2007 remote_id = packet_get_int(); 2008 host = packet_get_string(NULL); 2009 host_port = packet_get_int(); 2010 2011 if (packet_get_protocol_flags() & SSH_PROTOFLAG_HOST_IN_FWD_OPEN) { 2012 originator_string = packet_get_string(NULL); 2013 } else { 2014 originator_string = xstrdup("unknown (remote did not supply name)"); 2015 } 2016 packet_done(); 2017 sock = channel_connect_to(host, host_port); 2018 if (sock != -1) { 2019 c = channel_new("connected socket", 2020 SSH_CHANNEL_CONNECTING, sock, sock, -1, 0, 0, 0, 2021 originator_string, 1); 2022 if (c == NULL) { 2023 error("channel_input_port_open: channel_new failed"); 2024 close(sock); 2025 } else { 2026 c->remote_id = remote_id; 2027 } 2028 } 2029 if (c == NULL) { 2030 packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE); 2031 packet_put_int(remote_id); 2032 packet_send(); 2033 } 2034 xfree(host); 2035 } 2036 2037 2038 /* -- tcp forwarding */ 2039 2040 /* 2041 * Initiate forwarding of connections to local port "port" through the secure 2042 * channel to host:port from remote side. 2043 */ 2044 int 2045 channel_request_local_forwarding(u_short listen_port, const char *host_to_connect, 2046 u_short port_to_connect, int gateway_ports) 2047 { 2048 return channel_request_forwarding( 2049 NULL, listen_port, 2050 host_to_connect, port_to_connect, 2051 gateway_ports, /*remote_fwd*/ 0); 2052 } 2053 2054 /* 2055 * If 'remote_fwd' is true we have a '-R style' listener for protocol 2 2056 * (SSH_CHANNEL_RPORT_LISTENER). 2057 */ 2058 int 2059 channel_request_forwarding( 2060 const char *listen_address, u_short listen_port, 2061 const char *host_to_connect, u_short port_to_connect, 2062 int gateway_ports, int remote_fwd) 2063 { 2064 Channel *c; 2065 int success, sock, on = 1, type; 2066 struct addrinfo hints, *ai, *aitop; 2067 char ntop[NI_MAXHOST], strport[NI_MAXSERV]; 2068 const char *host; 2069 struct linger linger; 2070 2071 success = 0; 2072 2073 if (remote_fwd) { 2074 host = listen_address; 2075 type = SSH_CHANNEL_RPORT_LISTENER; 2076 } else { 2077 host = host_to_connect; 2078 type = SSH_CHANNEL_PORT_LISTENER; 2079 } 2080 2081 if (strlen(host) > SSH_CHANNEL_PATH_LEN - 1) { 2082 error("Forward host name too long."); 2083 return success; 2084 } 2085 2086 /* XXX listen_address is currently ignored */ 2087 /* 2088 * getaddrinfo returns a loopback address if the hostname is 2089 * set to NULL and hints.ai_flags is not AI_PASSIVE 2090 */ 2091 memset(&hints, 0, sizeof(hints)); 2092 hints.ai_family = IPv4or6; 2093 hints.ai_flags = gateway_ports ? AI_PASSIVE : 0; 2094 hints.ai_socktype = SOCK_STREAM; 2095 snprintf(strport, sizeof strport, "%d", listen_port); 2096 if (getaddrinfo(NULL, strport, &hints, &aitop) != 0) 2097 packet_disconnect("getaddrinfo: fatal error"); 2098 2099 for (ai = aitop; ai; ai = ai->ai_next) { 2100 if (ai->ai_family != AF_INET && ai->ai_family != AF_INET6) 2101 continue; 2102 if (getnameinfo(ai->ai_addr, ai->ai_addrlen, ntop, sizeof(ntop), 2103 strport, sizeof(strport), NI_NUMERICHOST|NI_NUMERICSERV) != 0) { 2104 error("channel_request_forwarding: getnameinfo failed"); 2105 continue; 2106 } 2107 /* Create a port to listen for the host. */ 2108 sock = socket(ai->ai_family, SOCK_STREAM, 0); 2109 if (sock < 0) { 2110 /* this is no error since kernel may not support ipv6 */ 2111 verbose("socket: %.100s", strerror(errno)); 2112 continue; 2113 } 2114 /* 2115 * Set socket options. We would like the socket to disappear 2116 * as soon as it has been closed for whatever reason. 2117 */ 2118 setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, (void *)&on, sizeof(on)); 2119 linger.l_onoff = 1; 2120 linger.l_linger = 5; 2121 setsockopt(sock, SOL_SOCKET, SO_LINGER, (void *)&linger, sizeof(linger)); 2122 debug("Local forwarding listening on %s port %s.", ntop, strport); 2123 2124 /* Bind the socket to the address. */ 2125 if (bind(sock, ai->ai_addr, ai->ai_addrlen) < 0) { 2126 /* address can be in use ipv6 address is already bound */ 2127 verbose("bind: %.100s", strerror(errno)); 2128 close(sock); 2129 continue; 2130 } 2131 /* Start listening for connections on the socket. */ 2132 if (listen(sock, 5) < 0) { 2133 error("listen: %.100s", strerror(errno)); 2134 close(sock); 2135 continue; 2136 } 2137 /* Allocate a channel number for the socket. */ 2138 c = channel_new("port listener", type, sock, sock, -1, 2139 CHAN_TCP_WINDOW_DEFAULT, CHAN_TCP_PACKET_DEFAULT, 2140 0, xstrdup("port listener"), 1); 2141 if (c == NULL) { 2142 error("channel_request_forwarding: channel_new failed"); 2143 close(sock); 2144 continue; 2145 } 2146 strlcpy(c->path, host, sizeof(c->path)); 2147 c->host_port = port_to_connect; 2148 c->listening_port = listen_port; 2149 success = 1; 2150 } 2151 if (success == 0) 2152 error("channel_request_forwarding: cannot listen to port: %d", 2153 listen_port); 2154 freeaddrinfo(aitop); 2155 return success; 2156 } 2157 2158 /* 2159 * Initiate forwarding of connections to port "port" on remote host through 2160 * the secure channel to host:port from local side. 2161 */ 2162 2163 void 2164 channel_request_remote_forwarding(u_short listen_port, 2165 const char *host_to_connect, u_short port_to_connect) 2166 { 2167 int payload_len, type, success = 0; 2168 2169 /* Record locally that connection to this host/port is permitted. */ 2170 if (num_permitted_opens >= SSH_MAX_FORWARDS_PER_DIRECTION) 2171 fatal("channel_request_remote_forwarding: too many forwards"); 2172 2173 /* Send the forward request to the remote side. */ 2174 if (compat20) { 2175 const char *address_to_bind = "0.0.0.0"; 2176 packet_start(SSH2_MSG_GLOBAL_REQUEST); 2177 packet_put_cstring("tcpip-forward"); 2178 packet_put_char(0); /* boolean: want reply */ 2179 packet_put_cstring(address_to_bind); 2180 packet_put_int(listen_port); 2181 packet_send(); 2182 packet_write_wait(); 2183 /* Assume that server accepts the request */ 2184 success = 1; 2185 } else { 2186 packet_start(SSH_CMSG_PORT_FORWARD_REQUEST); 2187 packet_put_int(listen_port); 2188 packet_put_cstring(host_to_connect); 2189 packet_put_int(port_to_connect); 2190 packet_send(); 2191 packet_write_wait(); 2192 2193 /* Wait for response from the remote side. */ 2194 type = packet_read(&payload_len); 2195 switch (type) { 2196 case SSH_SMSG_SUCCESS: 2197 success = 1; 2198 break; 2199 case SSH_SMSG_FAILURE: 2200 log("Warning: Server denied remote port forwarding."); 2201 break; 2202 default: 2203 /* Unknown packet */ 2204 packet_disconnect("Protocol error for port forward request:" 2205 "received packet type %d.", type); 2206 } 2207 } 2208 if (success) { 2209 permitted_opens[num_permitted_opens].host_to_connect = xstrdup(host_to_connect); 2210 permitted_opens[num_permitted_opens].port_to_connect = port_to_connect; 2211 permitted_opens[num_permitted_opens].listen_port = listen_port; 2212 num_permitted_opens++; 2213 } 2214 } 2215 2216 /* 2217 * This is called after receiving CHANNEL_FORWARDING_REQUEST. This initates 2218 * listening for the port, and sends back a success reply (or disconnect 2219 * message if there was an error). This never returns if there was an error. 2220 */ 2221 2222 void 2223 channel_input_port_forward_request(int is_root, int gateway_ports) 2224 { 2225 u_short port, host_port; 2226 char *hostname; 2227 2228 /* Get arguments from the packet. */ 2229 port = packet_get_int(); 2230 hostname = packet_get_string(NULL); 2231 host_port = packet_get_int(); 2232 2233 /* 2234 * Check that an unprivileged user is not trying to forward a 2235 * privileged port. 2236 */ 2237 if (port < IPPORT_RESERVED && !is_root) 2238 packet_disconnect("Requested forwarding of port %d but user is not root.", 2239 port); 2240 /* Initiate forwarding */ 2241 channel_request_local_forwarding(port, hostname, host_port, gateway_ports); 2242 2243 /* Free the argument string. */ 2244 xfree(hostname); 2245 } 2246 2247 /* 2248 * Permits opening to any host/port if permitted_opens[] is empty. This is 2249 * usually called by the server, because the user could connect to any port 2250 * anyway, and the server has no way to know but to trust the client anyway. 2251 */ 2252 void 2253 channel_permit_all_opens() 2254 { 2255 if (num_permitted_opens == 0) 2256 all_opens_permitted = 1; 2257 } 2258 2259 void 2260 channel_add_permitted_opens(char *host, int port) 2261 { 2262 if (num_permitted_opens >= SSH_MAX_FORWARDS_PER_DIRECTION) 2263 fatal("channel_request_remote_forwarding: too many forwards"); 2264 debug("allow port forwarding to host %s port %d", host, port); 2265 2266 permitted_opens[num_permitted_opens].host_to_connect = xstrdup(host); 2267 permitted_opens[num_permitted_opens].port_to_connect = port; 2268 num_permitted_opens++; 2269 2270 all_opens_permitted = 0; 2271 } 2272 2273 void 2274 channel_clear_permitted_opens(void) 2275 { 2276 int i; 2277 2278 for (i = 0; i < num_permitted_opens; i++) 2279 xfree(permitted_opens[i].host_to_connect); 2280 num_permitted_opens = 0; 2281 2282 } 2283 2284 2285 /* return socket to remote host, port */ 2286 static int 2287 connect_to(const char *host, u_short port) 2288 { 2289 struct addrinfo hints, *ai, *aitop; 2290 char ntop[NI_MAXHOST], strport[NI_MAXSERV]; 2291 int gaierr; 2292 int sock = -1; 2293 2294 memset(&hints, 0, sizeof(hints)); 2295 hints.ai_family = IPv4or6; 2296 hints.ai_socktype = SOCK_STREAM; 2297 snprintf(strport, sizeof strport, "%d", port); 2298 if ((gaierr = getaddrinfo(host, strport, &hints, &aitop)) != 0) { 2299 error("connect_to %.100s: unknown host (%s)", host, 2300 gai_strerror(gaierr)); 2301 return -1; 2302 } 2303 for (ai = aitop; ai; ai = ai->ai_next) { 2304 if (ai->ai_family != AF_INET && ai->ai_family != AF_INET6) 2305 continue; 2306 if (getnameinfo(ai->ai_addr, ai->ai_addrlen, ntop, sizeof(ntop), 2307 strport, sizeof(strport), NI_NUMERICHOST|NI_NUMERICSERV) != 0) { 2308 error("connect_to: getnameinfo failed"); 2309 continue; 2310 } 2311 sock = socket(ai->ai_family, SOCK_STREAM, 0); 2312 if (sock < 0) { 2313 error("socket: %.100s", strerror(errno)); 2314 continue; 2315 } 2316 if (fcntl(sock, F_SETFL, O_NONBLOCK) < 0) 2317 fatal("connect_to: F_SETFL: %s", strerror(errno)); 2318 if (connect(sock, ai->ai_addr, ai->ai_addrlen) < 0 && 2319 errno != EINPROGRESS) { 2320 error("connect_to %.100s port %s: %.100s", ntop, strport, 2321 strerror(errno)); 2322 close(sock); 2323 continue; /* fail -- try next */ 2324 } 2325 break; /* success */ 2326 2327 } 2328 freeaddrinfo(aitop); 2329 if (!ai) { 2330 error("connect_to %.100s port %d: failed.", host, port); 2331 return -1; 2332 } 2333 /* success */ 2334 return sock; 2335 } 2336 2337 int 2338 channel_connect_by_listen_address(u_short listen_port) 2339 { 2340 int i; 2341 2342 for (i = 0; i < num_permitted_opens; i++) 2343 if (permitted_opens[i].listen_port == listen_port) 2344 return connect_to( 2345 permitted_opens[i].host_to_connect, 2346 permitted_opens[i].port_to_connect); 2347 error("WARNING: Server requests forwarding for unknown listen_port %d", 2348 listen_port); 2349 return -1; 2350 } 2351 2352 /* Check if connecting to that port is permitted and connect. */ 2353 int 2354 channel_connect_to(const char *host, u_short port) 2355 { 2356 int i, permit; 2357 2358 permit = all_opens_permitted; 2359 if (!permit) { 2360 for (i = 0; i < num_permitted_opens; i++) 2361 if (permitted_opens[i].port_to_connect == port && 2362 strcmp(permitted_opens[i].host_to_connect, host) == 0) 2363 permit = 1; 2364 2365 } 2366 if (!permit) { 2367 log("Received request to connect to host %.100s port %d, " 2368 "but the request was denied.", host, port); 2369 return -1; 2370 } 2371 return connect_to(host, port); 2372 } 2373 2374 /* -- X11 forwarding */ 2375 2376 /* 2377 * Creates an internet domain socket for listening for X11 connections. 2378 * Returns a suitable value for the DISPLAY variable, or NULL if an error 2379 * occurs. 2380 */ 2381 char * 2382 x11_create_display_inet(int screen_number, int x11_display_offset) 2383 { 2384 int display_number, sock; 2385 u_short port; 2386 struct addrinfo hints, *ai, *aitop; 2387 char strport[NI_MAXSERV]; 2388 int gaierr, n, num_socks = 0, socks[NUM_SOCKS]; 2389 char display[512]; 2390 char hostname[MAXHOSTNAMELEN]; 2391 2392 for (display_number = x11_display_offset; 2393 display_number < MAX_DISPLAYS; 2394 display_number++) { 2395 port = 6000 + display_number; 2396 memset(&hints, 0, sizeof(hints)); 2397 hints.ai_family = IPv4or6; 2398 hints.ai_flags = AI_PASSIVE; /* XXX loopback only ? */ 2399 hints.ai_socktype = SOCK_STREAM; 2400 snprintf(strport, sizeof strport, "%d", port); 2401 if ((gaierr = getaddrinfo(NULL, strport, &hints, &aitop)) != 0) { 2402 error("getaddrinfo: %.100s", gai_strerror(gaierr)); 2403 return NULL; 2404 } 2405 for (ai = aitop; ai; ai = ai->ai_next) { 2406 if (ai->ai_family != AF_INET && ai->ai_family != AF_INET6) 2407 continue; 2408 sock = socket(ai->ai_family, SOCK_STREAM, 0); 2409 if (sock < 0) { 2410 error("socket: %.100s", strerror(errno)); 2411 return NULL; 2412 } 2413 if (bind(sock, ai->ai_addr, ai->ai_addrlen) < 0) { 2414 debug("bind port %d: %.100s", port, strerror(errno)); 2415 shutdown(sock, SHUT_RDWR); 2416 close(sock); 2417 for (n = 0; n < num_socks; n++) { 2418 shutdown(socks[n], SHUT_RDWR); 2419 close(socks[n]); 2420 } 2421 num_socks = 0; 2422 break; 2423 } 2424 socks[num_socks++] = sock; 2425 if (num_socks == NUM_SOCKS) 2426 break; 2427 } 2428 freeaddrinfo(aitop); 2429 if (num_socks > 0) 2430 break; 2431 } 2432 if (display_number >= MAX_DISPLAYS) { 2433 error("Failed to allocate internet-domain X11 display socket."); 2434 return NULL; 2435 } 2436 /* Start listening for connections on the socket. */ 2437 for (n = 0; n < num_socks; n++) { 2438 sock = socks[n]; 2439 if (listen(sock, 5) < 0) { 2440 error("listen: %.100s", strerror(errno)); 2441 shutdown(sock, SHUT_RDWR); 2442 close(sock); 2443 return NULL; 2444 } 2445 } 2446 2447 /* Set up a suitable value for the DISPLAY variable. */ 2448 if (gethostname(hostname, sizeof(hostname)) < 0) 2449 fatal("gethostname: %.100s", strerror(errno)); 2450 snprintf(display, sizeof display, "%.400s:%d.%d", hostname, 2451 display_number, screen_number); 2452 2453 /* Allocate a channel for each socket. */ 2454 for (n = 0; n < num_socks; n++) { 2455 sock = socks[n]; 2456 (void) channel_new("x11 listener", 2457 SSH_CHANNEL_X11_LISTENER, sock, sock, -1, 2458 CHAN_X11_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT, 2459 0, xstrdup("X11 inet listener"), 1); 2460 } 2461 2462 /* Return a suitable value for the DISPLAY environment variable. */ 2463 return xstrdup(display); 2464 } 2465 2466 #ifndef X_UNIX_PATH 2467 #define X_UNIX_PATH "/tmp/.X11-unix/X" 2468 #endif 2469 2470 static int 2471 connect_local_xsocket(u_int dnr) 2472 { 2473 static const char *const x_sockets[] = { 2474 X_UNIX_PATH "%u", 2475 "/var/X/.X11-unix/X" "%u", 2476 "/usr/spool/sockets/X11/" "%u", 2477 NULL 2478 }; 2479 int sock; 2480 struct sockaddr_un addr; 2481 const char *const * path; 2482 2483 for (path = x_sockets; *path; ++path) { 2484 sock = socket(AF_UNIX, SOCK_STREAM, 0); 2485 if (sock < 0) 2486 error("socket: %.100s", strerror(errno)); 2487 memset(&addr, 0, sizeof(addr)); 2488 addr.sun_family = AF_UNIX; 2489 snprintf(addr.sun_path, sizeof addr.sun_path, *path, dnr); 2490 if (connect(sock, (struct sockaddr *) & addr, sizeof(addr)) == 0) 2491 return sock; 2492 close(sock); 2493 } 2494 error("connect %.100s: %.100s", addr.sun_path, strerror(errno)); 2495 return -1; 2496 } 2497 2498 int 2499 x11_connect_display(void) 2500 { 2501 int display_number, sock = 0; 2502 const char *display; 2503 char buf[1024], *cp; 2504 struct addrinfo hints, *ai, *aitop; 2505 char strport[NI_MAXSERV]; 2506 int gaierr; 2507 2508 /* Try to open a socket for the local X server. */ 2509 display = getenv("DISPLAY"); 2510 if (!display) { 2511 error("DISPLAY not set."); 2512 return -1; 2513 } 2514 /* 2515 * Now we decode the value of the DISPLAY variable and make a 2516 * connection to the real X server. 2517 */ 2518 2519 /* 2520 * Check if it is a unix domain socket. Unix domain displays are in 2521 * one of the following formats: unix:d[.s], :d[.s], ::d[.s] 2522 */ 2523 if (strncmp(display, "unix:", 5) == 0 || 2524 display[0] == ':') { 2525 /* Connect to the unix domain socket. */ 2526 if (sscanf(strrchr(display, ':') + 1, "%d", &display_number) != 1) { 2527 error("Could not parse display number from DISPLAY: %.100s", 2528 display); 2529 return -1; 2530 } 2531 /* Create a socket. */ 2532 sock = connect_local_xsocket(display_number); 2533 if (sock < 0) 2534 return -1; 2535 2536 /* OK, we now have a connection to the display. */ 2537 return sock; 2538 } 2539 /* 2540 * Connect to an inet socket. The DISPLAY value is supposedly 2541 * hostname:d[.s], where hostname may also be numeric IP address. 2542 */ 2543 strncpy(buf, display, sizeof(buf)); 2544 buf[sizeof(buf) - 1] = 0; 2545 cp = strchr(buf, ':'); 2546 if (!cp) { 2547 error("Could not find ':' in DISPLAY: %.100s", display); 2548 return -1; 2549 } 2550 *cp = 0; 2551 /* buf now contains the host name. But first we parse the display number. */ 2552 if (sscanf(cp + 1, "%d", &display_number) != 1) { 2553 error("Could not parse display number from DISPLAY: %.100s", 2554 display); 2555 return -1; 2556 } 2557 2558 /* Look up the host address */ 2559 memset(&hints, 0, sizeof(hints)); 2560 hints.ai_family = IPv4or6; 2561 hints.ai_socktype = SOCK_STREAM; 2562 snprintf(strport, sizeof strport, "%d", 6000 + display_number); 2563 if ((gaierr = getaddrinfo(buf, strport, &hints, &aitop)) != 0) { 2564 error("%.100s: unknown host. (%s)", buf, gai_strerror(gaierr)); 2565 return -1; 2566 } 2567 for (ai = aitop; ai; ai = ai->ai_next) { 2568 /* Create a socket. */ 2569 sock = socket(ai->ai_family, SOCK_STREAM, 0); 2570 if (sock < 0) { 2571 debug("socket: %.100s", strerror(errno)); 2572 continue; 2573 } 2574 /* Connect it to the display. */ 2575 if (connect(sock, ai->ai_addr, ai->ai_addrlen) < 0) { 2576 debug("connect %.100s port %d: %.100s", buf, 2577 6000 + display_number, strerror(errno)); 2578 close(sock); 2579 continue; 2580 } 2581 /* Success */ 2582 break; 2583 } 2584 freeaddrinfo(aitop); 2585 if (!ai) { 2586 error("connect %.100s port %d: %.100s", buf, 6000 + display_number, 2587 strerror(errno)); 2588 return -1; 2589 } 2590 return sock; 2591 } 2592 2593 /* 2594 * This is called when SSH_SMSG_X11_OPEN is received. The packet contains 2595 * the remote channel number. We should do whatever we want, and respond 2596 * with either SSH_MSG_OPEN_CONFIRMATION or SSH_MSG_OPEN_FAILURE. 2597 */ 2598 2599 void 2600 x11_input_open(int type, int plen, void *ctxt) 2601 { 2602 Channel *c = NULL; 2603 int remote_id, sock = 0; 2604 char *remote_host; 2605 2606 debug("Received X11 open request."); 2607 2608 remote_id = packet_get_int(); 2609 2610 if (packet_get_protocol_flags() & SSH_PROTOFLAG_HOST_IN_FWD_OPEN) { 2611 remote_host = packet_get_string(NULL); 2612 } else { 2613 remote_host = xstrdup("unknown (remote did not supply name)"); 2614 } 2615 packet_done(); 2616 2617 /* Obtain a connection to the real X display. */ 2618 sock = x11_connect_display(); 2619 if (sock != -1) { 2620 /* Allocate a channel for this connection. */ 2621 c = channel_new("connected x11 socket", 2622 SSH_CHANNEL_X11_OPEN, sock, sock, -1, 0, 0, 0, 2623 remote_host, 1); 2624 if (c == NULL) { 2625 error("x11_input_open: channel_new failed"); 2626 close(sock); 2627 } else { 2628 c->remote_id = remote_id; 2629 c->force_drain = 1; 2630 } 2631 } 2632 if (c == NULL) { 2633 /* Send refusal to the remote host. */ 2634 packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE); 2635 packet_put_int(remote_id); 2636 } else { 2637 /* Send a confirmation to the remote host. */ 2638 packet_start(SSH_MSG_CHANNEL_OPEN_CONFIRMATION); 2639 packet_put_int(remote_id); 2640 packet_put_int(c->self); 2641 } 2642 packet_send(); 2643 } 2644 2645 /* dummy protocol handler that denies SSH-1 requests (agent/x11) */ 2646 void 2647 deny_input_open(int type, int plen, void *ctxt) 2648 { 2649 int rchan = packet_get_int(); 2650 switch(type){ 2651 case SSH_SMSG_AGENT_OPEN: 2652 error("Warning: ssh server tried agent forwarding."); 2653 break; 2654 case SSH_SMSG_X11_OPEN: 2655 error("Warning: ssh server tried X11 forwarding."); 2656 break; 2657 default: 2658 error("deny_input_open: type %d plen %d", type, plen); 2659 break; 2660 } 2661 error("Warning: this is probably a break in attempt by a malicious server."); 2662 packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE); 2663 packet_put_int(rchan); 2664 packet_send(); 2665 } 2666 2667 /* 2668 * Requests forwarding of X11 connections, generates fake authentication 2669 * data, and enables authentication spoofing. 2670 * This should be called in the client only. 2671 */ 2672 void 2673 x11_request_forwarding_with_spoofing(int client_session_id, 2674 const char *proto, const char *data) 2675 { 2676 u_int data_len = (u_int) strlen(data) / 2; 2677 u_int i, value, len; 2678 char *new_data; 2679 int screen_number; 2680 const char *cp; 2681 u_int32_t rand = 0; 2682 2683 cp = getenv("DISPLAY"); 2684 if (cp) 2685 cp = strchr(cp, ':'); 2686 if (cp) 2687 cp = strchr(cp, '.'); 2688 if (cp) 2689 screen_number = atoi(cp + 1); 2690 else 2691 screen_number = 0; 2692 2693 /* Save protocol name. */ 2694 x11_saved_proto = xstrdup(proto); 2695 2696 /* 2697 * Extract real authentication data and generate fake data of the 2698 * same length. 2699 */ 2700 x11_saved_data = xmalloc(data_len); 2701 x11_fake_data = xmalloc(data_len); 2702 for (i = 0; i < data_len; i++) { 2703 if (sscanf(data + 2 * i, "%2x", &value) != 1) 2704 fatal("x11_request_forwarding: bad authentication data: %.100s", data); 2705 if (i % 4 == 0) 2706 rand = arc4random(); 2707 x11_saved_data[i] = value; 2708 x11_fake_data[i] = rand & 0xff; 2709 rand >>= 8; 2710 } 2711 x11_saved_data_len = data_len; 2712 x11_fake_data_len = data_len; 2713 2714 /* Convert the fake data into hex. */ 2715 len = 2 * data_len + 1; 2716 new_data = xmalloc(len); 2717 for (i = 0; i < data_len; i++) 2718 snprintf(new_data + 2 * i, len - 2 * i, 2719 "%02x", (u_char) x11_fake_data[i]); 2720 2721 /* Send the request packet. */ 2722 if (compat20) { 2723 channel_request_start(client_session_id, "x11-req", 0); 2724 packet_put_char(0); /* XXX bool single connection */ 2725 } else { 2726 packet_start(SSH_CMSG_X11_REQUEST_FORWARDING); 2727 } 2728 packet_put_cstring(proto); 2729 packet_put_cstring(new_data); 2730 packet_put_int(screen_number); 2731 packet_send(); 2732 packet_write_wait(); 2733 xfree(new_data); 2734 } 2735 2736 2737 /* -- agent forwarding */ 2738 2739 /* Sends a message to the server to request authentication fd forwarding. */ 2740 2741 void 2742 auth_request_forwarding() 2743 { 2744 packet_start(SSH_CMSG_AGENT_REQUEST_FORWARDING); 2745 packet_send(); 2746 packet_write_wait(); 2747 } 2748 2749 /* 2750 * Returns the name of the forwarded authentication socket. Returns NULL if 2751 * there is no forwarded authentication socket. The returned value points to 2752 * a static buffer. 2753 */ 2754 2755 char * 2756 auth_get_socket_name() 2757 { 2758 return auth_sock_name; 2759 } 2760 2761 /* removes the agent forwarding socket */ 2762 2763 void 2764 auth_sock_cleanup_proc(void *_pw) 2765 { 2766 struct passwd *pw = _pw; 2767 2768 if (auth_sock_name) { 2769 temporarily_use_uid(pw); 2770 unlink(auth_sock_name); 2771 rmdir(auth_sock_dir); 2772 auth_sock_name = NULL; 2773 restore_uid(); 2774 } 2775 } 2776 2777 /* 2778 * This is called to process SSH_CMSG_AGENT_REQUEST_FORWARDING on the server. 2779 * This starts forwarding authentication requests. 2780 */ 2781 2782 int 2783 auth_input_request_forwarding(struct passwd * pw) 2784 { 2785 Channel *nc; 2786 int sock; 2787 struct sockaddr_un sunaddr; 2788 2789 if (auth_get_socket_name() != NULL) { 2790 error("authentication forwarding requested twice."); 2791 return 0; 2792 } 2793 2794 /* Temporarily drop privileged uid for mkdir/bind. */ 2795 temporarily_use_uid(pw); 2796 2797 /* Allocate a buffer for the socket name, and format the name. */ 2798 auth_sock_name = xmalloc(MAXPATHLEN); 2799 auth_sock_dir = xmalloc(MAXPATHLEN); 2800 strlcpy(auth_sock_dir, "/tmp/ssh-XXXXXXXX", MAXPATHLEN); 2801 2802 /* Create private directory for socket */ 2803 if (mkdtemp(auth_sock_dir) == NULL) { 2804 packet_send_debug("Agent forwarding disabled: " 2805 "mkdtemp() failed: %.100s", strerror(errno)); 2806 restore_uid(); 2807 xfree(auth_sock_name); 2808 xfree(auth_sock_dir); 2809 auth_sock_name = NULL; 2810 auth_sock_dir = NULL; 2811 return 0; 2812 } 2813 snprintf(auth_sock_name, MAXPATHLEN, "%s/agent.%d", 2814 auth_sock_dir, (int) getpid()); 2815 2816 /* delete agent socket on fatal() */ 2817 fatal_add_cleanup(auth_sock_cleanup_proc, pw); 2818 2819 /* Create the socket. */ 2820 sock = socket(AF_UNIX, SOCK_STREAM, 0); 2821 if (sock < 0) 2822 packet_disconnect("socket: %.100s", strerror(errno)); 2823 2824 /* Bind it to the name. */ 2825 memset(&sunaddr, 0, sizeof(sunaddr)); 2826 sunaddr.sun_family = AF_UNIX; 2827 strncpy(sunaddr.sun_path, auth_sock_name, 2828 sizeof(sunaddr.sun_path)); 2829 2830 if (bind(sock, (struct sockaddr *) & sunaddr, sizeof(sunaddr)) < 0) 2831 packet_disconnect("bind: %.100s", strerror(errno)); 2832 2833 /* Restore the privileged uid. */ 2834 restore_uid(); 2835 2836 /* Start listening on the socket. */ 2837 if (listen(sock, 5) < 0) 2838 packet_disconnect("listen: %.100s", strerror(errno)); 2839 2840 /* Allocate a channel for the authentication agent socket. */ 2841 nc = channel_new("auth socket", 2842 SSH_CHANNEL_AUTH_SOCKET, sock, sock, -1, 2843 CHAN_X11_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT, 2844 0, xstrdup("auth socket"), 1); 2845 if (nc == NULL) { 2846 error("auth_input_request_forwarding: channel_new failed"); 2847 auth_sock_cleanup_proc(pw); 2848 fatal_remove_cleanup(auth_sock_cleanup_proc, pw); 2849 close(sock); 2850 return 0; 2851 } 2852 strlcpy(nc->path, auth_sock_name, sizeof(nc->path)); 2853 return 1; 2854 } 2855 2856 /* This is called to process an SSH_SMSG_AGENT_OPEN message. */ 2857 2858 void 2859 auth_input_open_request(int type, int plen, void *ctxt) 2860 { 2861 Channel *c = NULL; 2862 int remote_id, sock; 2863 char *name; 2864 2865 packet_integrity_check(plen, 4, type); 2866 2867 /* Read the remote channel number from the message. */ 2868 remote_id = packet_get_int(); 2869 2870 /* 2871 * Get a connection to the local authentication agent (this may again 2872 * get forwarded). 2873 */ 2874 sock = ssh_get_authentication_socket(); 2875 2876 /* 2877 * If we could not connect the agent, send an error message back to 2878 * the server. This should never happen unless the agent dies, 2879 * because authentication forwarding is only enabled if we have an 2880 * agent. 2881 */ 2882 if (sock >= 0) { 2883 name = xstrdup("authentication agent connection"); 2884 c = channel_new("", SSH_CHANNEL_OPEN, sock, sock, 2885 -1, 0, 0, 0, name, 1); 2886 if (c == NULL) { 2887 error("auth_input_open_request: channel_new failed"); 2888 xfree(name); 2889 close(sock); 2890 } else { 2891 c->remote_id = remote_id; 2892 c->force_drain = 1; 2893 } 2894 } 2895 if (c == NULL) { 2896 packet_start(SSH_MSG_CHANNEL_OPEN_FAILURE); 2897 packet_put_int(remote_id); 2898 } else { 2899 /* Send a confirmation to the remote host. */ 2900 debug("Forwarding authentication connection."); 2901 packet_start(SSH_MSG_CHANNEL_OPEN_CONFIRMATION); 2902 packet_put_int(remote_id); 2903 packet_put_int(c->self); 2904 } 2905 packet_send(); 2906 } 2907