xref: /openbsd-src/gnu/usr.bin/perl/lib/vmsish.t (revision 50b7afb2c2c0993b0894d4e34bf857cb13ed9c80)
1#!./perl
2
3BEGIN {
4    chdir 't' if -d 't';
5    @INC = '../lib';
6}
7
8my $perl = $^X;
9$perl = VMS::Filespec::vmsify($perl) if $^O eq 'VMS';
10
11my $Invoke_Perl = qq(MCR $perl "-I[-.lib]");
12
13use Test::More tests => 25;
14
15SKIP: {
16    skip("tests for non-VMS only", 1) if $^O eq 'VMS';
17
18    no utf8;
19
20    BEGIN { $Orig_Bits = $^H }
21
22    # make sure that all those 'use vmsish' calls didn't do anything.
23    is( $Orig_Bits, $^H,    'use vmsish a no-op' );
24}
25
26SKIP: {
27    skip("tests for VMS only", 24) unless $^O eq 'VMS';
28
29#========== vmsish status ==========
30`$Invoke_Perl -e 1`;  # Avoid system() from a pipe from harness.  Mutter.
31is($?,0,"simple Perl invocation: POSIX success status");
32{
33  use vmsish qw(status);
34  is(($? & 1),1, "importing vmsish [vmsish status]");
35  {
36    no vmsish qw(status); # check unimport function
37    is($?,0, "unimport vmsish [POSIX STATUS]");
38  }
39  # and lexical scoping
40  is(($? & 1),1,"lex scope of vmsish [vmsish status]");
41}
42is($?,0,"outer lex scope of vmsish [POSIX status]");
43
44{
45  use vmsish qw(exit);  # check import function
46  is($?,0,"importing vmsish exit [POSIX status]");
47}
48
49#========== vmsish exit, messages ==========
50{
51  use vmsish qw(status);
52
53  $msg = do_a_perl('-e "exit 1"');
54    $msg =~ s/\n/\\n/g; # keep output on one line
55  like($msg, qr/ABORT/, "POSIX ERR exit, DCL error message check");
56  is($?&1,0,"vmsish status check, POSIX ERR exit");
57
58  $msg = do_a_perl('-e "use vmsish qw(exit); exit 1"');
59    $msg =~ s/\n/\\n/g; # keep output on one line
60  ok(length($msg)==0,"vmsish OK exit, DCL error message check");
61  is($?&1,1, "vmsish status check, vmsish OK exit");
62
63  $msg = do_a_perl('-e "use vmsish qw(exit); exit 44"');
64    $msg =~ s/\n/\\n/g; # keep output on one line
65  like($msg, qr/ABORT/, "vmsish ERR exit, DCL error message check");
66  is($?&1,0,"vmsish ERR exit, vmsish status check");
67
68  $msg = do_a_perl('-e "use vmsish qw(hushed); exit 1"');
69  $msg =~ s/\n/\\n/g; # keep output on one line
70  ok(($msg !~ /ABORT/),"POSIX ERR exit, vmsish hushed, DCL error message check");
71
72  $msg = do_a_perl('-e "use vmsish qw(exit hushed); exit 44"');
73    $msg =~ s/\n/\\n/g; # keep output on one line
74  ok(($msg !~ /ABORT/),"vmsish ERR exit, vmsish hushed, DCL error message check");
75
76  $msg = do_a_perl('-e "use vmsish qw(exit hushed); no vmsish qw(hushed); exit 44"');
77  $msg =~ s/\n/\\n/g; # keep output on one line
78  like($msg, qr/ABORT/,"vmsish ERR exit, no vmsish hushed, DCL error message check");
79
80  $msg = do_a_perl('-e "use vmsish qw(hushed); die(qw(blah));"');
81  $msg =~ s/\n/\\n/g; # keep output on one line
82  ok(($msg !~ /ABORT/),"die, vmsish hushed, DCL error message check");
83
84  $msg = do_a_perl('-e "use vmsish qw(hushed); use Carp; croak(qw(blah));"');
85  $msg =~ s/\n/\\n/g; # keep output on one line
86  ok(($msg !~ /ABORT/),"croak, vmsish hushed, DCL error message check");
87
88  $msg = do_a_perl('-e "use vmsish qw(exit); vmsish::hushed(1); exit 44;"');
89  $msg =~ s/\n/\\n/g; # keep output on one line
90  ok(($msg !~ /ABORT/),"vmsish ERR exit, vmsish hushed at runtime, DCL error message check");
91
92  local *TEST;
93  open(TEST,'>vmsish_test.pl') || die('not ok ?? : unable to open "vmsish_test.pl" for writing');
94  print TEST "#! perl\n";
95  print TEST "use vmsish qw(hushed);\n";
96  print TEST "\$obvious = (\$compile(\$error;\n";
97  close TEST;
98  $msg = do_a_perl('vmsish_test.pl');
99  $msg =~ s/\n/\\n/g; # keep output on one line
100  ok(($msg !~ /ABORT/),"compile ERR exit, vmsish hushed, DCL error message check");
101  unlink 'vmsish_test.pl';
102}
103
104
105#========== vmsish time ==========
106{
107  my($utctime, @utclocal, @utcgmtime, $utcmtime,
108     $vmstime, @vmslocal, @vmsgmtime, $vmsmtime,
109     $utcval,  $vmaval, $offset);
110  # Make sure apparent local time isn't GMT
111  if (not $ENV{'SYS$TIMEZONE_DIFFERENTIAL'}) {
112    $oldtz = $ENV{'SYS$TIMEZONE_DIFFERENTIAL'};
113    $ENV{'SYS$TIMEZONE_DIFFERENTIAL'} = 3600;
114    eval "END { \$ENV{'SYS\$TIMEZONE_DIFFERENTIAL'} = $oldtz; }";
115    gmtime(0); # Force reset of tz offset
116  }
117
118  # Unless we are prepared to parse the timezone rules here and figure out
119  # what the correct offset was when the file was last revised, we need to
120  # use a file for which the current offset is known to be valid.  That's why
121  # we create a file rather than using an existing one for the stat() test.
122
123  my $file = 'sys$scratch:vmsish_t_flirble.tmp';
124  open TMP, ">$file" or die "Couldn't open file $file";
125  close TMP;
126  END { 1 while unlink $file; }
127
128  {
129     use_ok('vmsish', 'time');
130
131     # but that didn't get it in our current scope
132     use vmsish qw(time);
133
134     $vmstime   = time;
135     @vmslocal  = localtime($vmstime);
136     @vmsgmtime = gmtime($vmstime);
137     $vmsmtime  = (stat $file)[9];
138  }
139  $utctime   = time;
140  @utclocal  = localtime($vmstime);
141  @utcgmtime = gmtime($vmstime);
142  $utcmtime  = (stat $file)[9];
143
144  $offset = $ENV{'SYS$TIMEZONE_DIFFERENTIAL'};
145
146  # We allow lots of leeway (10 sec) difference for these tests,
147  # since it's unlikely local time will differ from UTC by so small
148  # an amount, and it renders the test resistant to delays from
149  # things like stat() on a file mounted over a slow network link.
150  ok(abs($utctime - $vmstime + $offset) <= 10,"(time) UTC: $utctime VMS: $vmstime");
151
152  $utcval = $utclocal[5] * 31536000 + $utclocal[7] * 86400 +
153            $utclocal[2] * 3600     + $utclocal[1] * 60 + $utclocal[0];
154  $vmsval = $vmslocal[5] * 31536000 + $vmslocal[7] * 86400 +
155            $vmslocal[2] * 3600     + $vmslocal[1] * 60 + $vmslocal[0];
156  ok(abs($vmsval - $utcval + $offset) <= 10, "(localtime) UTC: $utcval  VMS: $vmsval");
157  print "# UTC: @utclocal\n# VMS: @vmslocal\n";
158
159  $utcval = $utcgmtime[5] * 31536000 + $utcgmtime[7] * 86400 +
160            $utcgmtime[2] * 3600     + $utcgmtime[1] * 60 + $utcgmtime[0];
161  $vmsval = $vmsgmtime[5] * 31536000 + $vmsgmtime[7] * 86400 +
162            $vmsgmtime[2] * 3600     + $vmsgmtime[1] * 60 + $vmsgmtime[0];
163  ok(abs($vmsval - $utcval + $offset) <= 10, "(gmtime) UTC: $utcval  VMS: $vmsval");
164  print "# UTC: @utcgmtime\n# VMS: @vmsgmtime\n";
165
166  ok(abs($utcmtime - $vmsmtime + $offset) <= 10,"(stat) UTC: $utcmtime  VMS: $vmsmtime");
167}
168}
169
170#====== need this to make sure error messages come out, even if
171#       they were turned off in invoking procedure
172sub do_a_perl {
173    local *P;
174    open(P,'>vmsish_test.com') || die('not ok ?? : unable to open "vmsish_test.com" for writing');
175    print P "\$ set message/facil/sever/ident/text\n";
176    print P "\$ define/nolog/user sys\$error _nla0:\n";
177    print P "\$ $Invoke_Perl @_\n";
178    close P;
179    my $x = `\@vmsish_test.com`;
180    unlink 'vmsish_test.com';
181    return $x;
182}
183
184