#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright 2006 Sun Microsystems, Inc.  All rights reserved.
# Use is subject to license terms.
#
# ident	"%Z%%M%	%I%	%E% SMI"
#

Writing Library Makefiles in ON
===============================

Introduction
------------

This document guides you through the gnarly process of writing library
Makefiles for the ON consolidation.  It assumes that you're comfortable with
make(1) and are somewhat familiar with the ON Makefile standards outlined in
/shared/ON/general_docs/make_std.txt.

Makefile Overview
-----------------

Your library should consist of a hierarchical collection of Makefiles:

	lib/<library>/Makefile:

	  This is your library's top-level Makefile.  It should contain rules
	  for building any ISA-independent targets, such as installing header
	  files and building message catalogs, but should defer all other
	  targets to ISA-specific Makefiles.

	lib/<library>/Makefile.com

	  This is your library's common Makefile.  It should contain rules
	  and macros which are common to all ISAs. This Makefile should never
	  be built explicitly, but instead should be included (using the make
	  include mechanism) by all of your ISA-specific Makefiles.

	lib/<library>/<isa>/Makefile

	  These are your library's ISA-specific Makefiles, one per ISA
	  (usually sparc and i386, and often sparcv9 and amd64).  These
	  Makefiles should include your common Makefile and then provide any
	  needed ISA-specific rules and definitions, perhaps overriding those
	  provided in your common Makefile.

To simplify their maintenance and construction, $(SRC)/lib has a handful of
provided Makefiles that yours must include; the examples provided throughout
the document will show how to use them.  Please be sure to consult these
Makefiles before introducing your own custom build macros or rules.

	lib/Makefile.lib:

	  This contains the bulk of the macros for building shared objects.

	lib/Makefile.lib.64

	  This contains macros for building 64-bit objects, and should be
	  included in Makefiles for 64-bit native ISAs.

	lib/Makefile.rootfs

	  This contains macro overrides for libraries that install into /lib
	  (rather than /usr/lib).

	lib/Makefile.targ

	  This contains rules for building shared objects.

The remainder of this document discusses how to write each of your Makefiles
in detail, and provides examples from the libinetutil library.

The Library Top-level Makefile
------------------------------

As described above, your top-level library Makefile should contain
rules for building ISA-independent targets, but should defer the
building of all other targets to ISA-specific Makefiles.  The
ISA-independent targets usually consist of:

	install_h

	  Install all library header files into the proto area.
	  Can be omitted if your library has no header files.

	check

	  Check all library header files for hdrchk compliance.
	  Can be omitted if your library has no header files.

	_msg

	  Build and install a message catalog.
	  Can be omitted if your library has no message catalog.

Of course, other targets (such as `cstyle') are fine as well, as long as
they are ISA-independent.

The ROOTHDRS and CHECKHDRS targets are provided in lib/Makefile.lib to make
it easy for you to install and check your library's header files.  To use
these targets, your Makefile must set the HDRS to the list of your library's
header files to install and HDRDIR to the their location in the source tree.
In addition, if your header files need to be installed in a location other
than $(ROOT)/usr/include, your Makefile must also set ROOTHDRDIR to the
appropriate location in the proto area.  Once HDRS, HDRDIR and (optionally)
ROOTHDRDIR have been set, your Makefile need only contain

	  install_h: $(ROOTHDRS)

	  check: $(CHECKHDRS)

to bind the provided targets to the standard `install_h' and `check' rules.

Similar rules are provided (in $(SRC)/Makefile.msg.targ) to make it easy for
you to build and install message catalogs from your library's source files.

To install a catalog into the catalog directory in the proto area, define the
POFILE macro to be the name of your catalog, and specify that the _msg target
depends on $(MSGDOMAINPOFILE).  The examples below should clarify this.

To build a message catalog from arbitrarily many message source files, use
the BUILDPO.msgfiles macro.

	  include ../Makefile.lib

	  POFILE =	  libfoo.po
	  MSGFILES =	  $(OBJECTS:%.o=%.i)

	  # ...

	  $(POFILE): $(MSGFILES)
		$(BUILDPO.msgfiles)

	  _msg: $(MSGDOMAINPOFILE)

	  include $(SRC)/Makefile.msg.targ

Note that this example doesn't use grep to find message files, since that can
mask unreferenced files, and potentially lead to the inclusion of unwanted
messages or omission of intended messages in the catalogs.  As such, MSGFILES
should be derived from a known list of objects or sources.

It is usually preferable to run the source through the C preprocessor prior
to extracting messages.  To do this, use the ".i" suffix, as shown in the
above example.  If you need to skip the C preprocessor, just use the native
(.[ch]) suffix.

The only time you shouldn't use BUILDPO.msgfiles as the preferred means of
extracting messages is when you're extracting them from shell scripts; in
that case, you can use the BUILDPO.pofiles macro as explained below.

To build a message catalog from other message catalogs, or from source files
that include shell scripts, use the BUILDPO.pofiles macro:

	  include ../Makefile.lib

	  SUBDIRS =	  $(MACH)

	  POFILE =	  libfoo.po
	  POFILES =	  $(SUBDIRS:%=%/_%.po)

	  _msg :=	  TARGET = _msg

	  # ...

	  $(POFILE): $(POFILES)
		$(BUILDPO.pofiles)

	  _msg: $(MSGDOMAINPOFILE)

	  include $(SRC)/Makefile.msg.targ

The Makefile above would work in conjunction with the following in its
subdirectories' Makefiles:

	  POFILE =	  _thissubdir.po
	  MSGFILES =	  $(OBJECTS:%.o=%.i)

	  $(POFILE):	  $(MSGFILES)
		  $(BUILDPO.msgfiles)

	  _msg:		  $(POFILE)

	  include $(SRC)/Makefile.msg.targ

Since this POFILE will be combined with those in other subdirectories by the
parent Makefile and that merged file will be installed into the proto area
via MSGDOMAINPOFILE, there is no need to use MSGDOMAINPOFILE in this Makefile
(in fact, using it would lead to duplicate messages in the catalog).

When using any of these targets, keep in mind that other macros, like
XGETFLAGS and TEXT_DOMAIN may also be set in your Makefile to override or
augment the defaults provided in higher-level Makefiles.

As previously mentioned, you should defer all ISA-specific targets to your
ISA-specific Makefiles.  You can do this by:

	1. Setting SUBDIRS to the list of directories to descend into:

		SUBDIRS = $(MACH)

	   Note that if your library is also built 64-bit, then you should
	   also specify

		$(BUILD64)SUBDIRS += $(MACH64)

	   so that SUBDIRS contains $(MACH64) if and only if you're compiling
	   on a 64-bit ISA.

	2. Providing a common "descend into SUBDIRS" rule:

		$(SUBDIRS): FRC
			@cd $@; pwd; $(MAKE) $(TARGET)

		FRC:

	3. Providing a collection of conditional assignments that set TARGET
	   appropriately:

		all	:= TARGET= all
		clean	:= TARGET= clean
		clobber := TARGET= clobber
		install := TARGET= install
		lint	:= TARGET= lint

	   The order doesn't matter, but alphabetical is preferable.

	4. Having the aforementioned targets depend on SUBDIRS:

		all clean clobber install lint: $(SUBDIRS)

	   The `all' target must be listed first so that make uses it as the
	   default target; the others might as well be listed alphabetically.

As an example of how all of this goes together, here's libinetutil's
top-level library Makefile (license notice and copyright omitted):

	include ../Makefile.lib

	HDRS =		libinetutil.h
	HDRDIR =	common
	SUBDIRS =	$(MACH)
	$(BUILD64)SUBDIRS += $(MACH64)

	all :=		TARGET = all
	clean :=	TARGET = clean
	clobber :=	TARGET = clobber
	install :=	TARGET = install
	lint :=		TARGET = lint

	.KEEP_STATE:

	all clean clobber install lint: $(SUBDIRS)

	install_h:	$(ROOTHDRS)

	check:		$(CHECKHDRS)

	$(SUBDIRS): FRC
		@cd $@; pwd; $(MAKE) $(TARGET)

	FRC:

	include ../Makefile.targ

The Common Makefile
-------------------

In concept, your common Makefile should contain all of the rules and
definitions that are the same on all ISAs.  However, for reasons of
maintainability and cleanliness, you're encouraged to place even
ISA-dependent rules and definitions, as long you express them in an
ISA-independent way (e.g., by using $(MACH), $(TARGETMACH), and their kin).
(TARGETMACH is the same as MACH for 32-bit targets, and the same as MACH64
for 64-bit targets).

The common Makefile can be conceptually split up into four sections:

	1. A copyright and comments section.  Please see the prototype
	   files in usr/src/prototypes for examples of how to format the
	   copyright message properly.  For brevity and clarity, this
	   section has been omitted from the examples shown here.

	2. A list of macros that must be defined prior to the inclusion of
	   Makefile.lib.  This section is conceptually terminated by the
	   inclusion of Makefile.lib, followed, if necessary, by the
	   inclusion of Makefile.rootfs (only if the library is to be
	   installed in /lib rather than the default /usr/lib).

	3. A list of macros that need not be defined prior to the inclusion
	   of Makefile.lib (or which must be defined following the inclusion
	   of Makefile.lib, to override or augment its definitions).  This
	   section is conceptually terminated by the .KEEP_STATE directive.

	4. A list of targets.

The first section is self-explanatory.  The second typically consists of the
following macros:

	LIBRARY

	  Set to the name of the static version of your library, such
	  as `libinetutil.a'.  You should always specify the `.a' suffix,
	  since pattern-matching rules in higher-level Makefiles rely on it,
	  even though static libraries are not normally built in ON, and
	  are never installed in the proto area.  Note that the LIBS macro
	  (described below) controls the types of libraries that are built
	  when building your library.

	  If you are building a loadable module (i.e., a shared object that
	  is only linked at runtime with dlopen(3dl)), specify the name of
	  the loadable module with a `.a' suffix, such as `devfsadm_mod.a'.

	VERS

	  Set to the version of your shared library, such as `.1'.  You
	  actually do not need to set this prior to the inclusion of
	  Makefile.lib, but it is good practice to do so since VERS and
	  LIBRARY are so closely related.

	OBJECTS

	  Set to the list of object files contained in your library, such as
	  `a.o b.o'.  Usually, this will be the same as your library's source
	  files (except with .o extensions), but if your library compiles
	  source files outside of the library directory itself, it will
	  differ.  We'll see an example of this with libinetutil.

The third section typically consists of the following macros:

	LIBS

	  Set to the list of the types of libraries to build when building
	  your library.  For dynamic libraries, you should set this to
	  `$(DYNLIB) $(LINTLIB)' so that a dynamic library and lint library
	  are built.  For loadable modules, you should just list DYNLIB,
	  since there's no point in building a lint library for libraries
	  that are never linked at compile-time.

	  If your library needs to be built as a static library (typically
	  to be used in other parts of the build), you should set LIBS to
	  `$(LIBRARY)'.  However, you should do this only when absolutely
	  necessary, and you must *never* ship static libraries to customers.

	ROOTLIBDIR (if your library installs to a nonstandard directory)

	  Set to the directory your 32-bit shared objects will install into
	  with the standard $(ROOTxxx) macros.  Since this defaults to
	  $(ROOT)/usr/lib ($(ROOT)/lib if you included Makefile.rootfs),
	  you usually do not need to set this.

	ROOTLIBDIR64 (if your library installs to a nonstandard directory)

	  Set to the directory your 64-bit shared objects will install into
	  with the standard $(ROOTxxx64) macros.  Since this defaults to
	  $(ROOT)/usr/lib/$(MACH64) ($(ROOT)/lib/$(MACH64) if you included
	  Makefile.rootfs), you usually do not need to set this.

	SRCDIR

	  Set to the directory containing your library's source files, such
	  as `../common'.  Because this Makefile is actually included from
	  your ISA-specific Makefiles, make sure you specify the directory
	  relative to your library's <isa> directory.

	SRCS (if necessary)

	  Set to the list of source files required to build your library.
	  This defaults to $(OBJECTS:%.o=$(SRCDIR)/%.c) in Makefile.lib, so
	  you only need to set this when source files from directories other
	  than SRCDIR are needed.  Keep in mind that SRCS should be set to a
	  list of source file *pathnames*, not just a list of filenames.

	LINTLIB-specific SRCS (required if building a lint library)

	  Set to a special "lint stubs" file to use when constructing your
	  library's lint library.  The lint stubs file must be used to
	  guarantee that programs that link against your library will be able
	  to lint clean.  To do this, you must conditionally set SRCS to use
	  your stubs file by specifying `LINTLIB := SRCS= $(SRCDIR)/$(LINTSRC)'
	  in your Makefile.  Of course, you do not need to set this if your
	  library does not build a lint library.

	LDLIBS

	  Appended with the list of libraries and library directories needed
	  to build your library; minimally "-lc".  Note that this should
	  *never* be set, since that will inadvertently clear the library
	  search path, causing the linker to look in the wrong place for
	  the libraries.

	  Since lint targets also make use of LDLIBS, LDLIBS *must* only
	  contain -l and -L directives; all other link-related directives
	  should be put in DYNFLAGS (if they apply only to shared object
	  construction) or LDFLAGS (if they apply in general).

	MAPFILES (if necessary)

	  Set to the list of mapfiles used to link each ISA-specific version
	  of your library.  This defaults to `$(SRCDIR)/mapfile-vers' in
	  Makefile.lib, so you only need to change this if you have additional
	  mapfiles or your mapfile doesn't follow the standard naming
	  convention.  If you have supplemental ISA-dependent mapfiles that
	  reside in the respective <isa> directories, you can augment
	  MAPFILES like this:

		MAPFILES += mapfile-vers

	CPPFLAGS (if necessary)

	   Appended with any flags that need to be passed to the C
	   preprocessor (typically -D and -I flags).  Since lint macros use
	   CPPFLAGS, CPPFLAGS *must* only contain directives known to the C
	   preprocessor.  When compiling MT-safe code, CPPFLAGS *must*
	   include -D_REENTRANT.  When compiling large file aware code,
	   CPPFLAGS *must* include -D_FILE_OFFSET_BITS=64.

	CFLAGS

	   Appended with any flags that need to be passed to the C compiler.
	   Minimally, append `$(CCVERBOSE)'.  Keep in mind that you should
	   add any C preprocessor flags to CPPFLAGS, not CFLAGS.

	CFLAGS64 (if necessary)

	   Appended with any flags that need to be passed to the C compiler
	   when compiling 64-bit code.  Since all 64-bit code is compiled
	   $(CCVERBOSE), you usually do not need to modify CFLAGS64.

 	COPTFLAG (if necessary)

	   Set to control the optimization level used by the C compiler when
	   compiling 32-bit code.  You should only set this if absolutely
	   necessary, and it should only contain optimization-related
	   settings (or -g).

 	COPTFLAG64 (if necessary)

	   Set to control the optimization level used by the C compiler when
	   compiling 64-bit code.  You should only set this if absolutely
	   necessary, and it should only contain optimization-related
	   settings (or -g).

	LINTFLAGS (if necessary)

	   Appended with any flags that need to be passed to lint when
	   linting 32-bit code.  You should only modify LINTFLAGS in
	   rare instances where your code cannot (or should not) be fixed.

	LINTFLAGS64 (if necessary)

	   Appended with any flags that need to be passed to lint when
	   linting 64-bit code.  You should only modify LINTFLAGS64 in
	   rare instances where your code cannot (or should not) be fixed.

Of course, you may use other macros as necessary.

The fourth section typically consists of the following targets:

	all

	  Build all of the types of the libraries named by LIBS.  Must always
	  be the first real target in common Makefile.  Since the
	  higher-level Makefiles already contain rules to build all of the
	  different types of libraries, you can usually just specify

		all: $(LIBS)

	  though it should be listed as an empty target if LIBS is set by your
	  ISA-specific Makefiles (see above).

	lint

	  Use the `lintcheck' rule provided by lib/Makefile.targ to lint the
	  actual library sources.  Historically, this target has also been
	  used to build the lint library (using LINTLIB), but that usage is
	  now discouraged.  Thus, this rule should be specified as

		lint: lintcheck

Conspicuously absent from this section are the `clean' and `clobber' targets.
These targets are already provided by lib/Makefile.targ and thus should not
be provided by your common Makefile.  Instead, your common Makefile should
list any additional files to remove during a `clean' and `clobber' by
appending to the CLEANFILES and CLOBBERFILES macros.

Once again, here's libinetutil's common Makefile, which shows how many of
these directives go together.  Note that Makefile.rootfs is included to
cause libinetutil.so.1 to be installed in /lib rather than /usr/lib:

	LIBRARY =	libinetutil.a
	VERS =		.1
	OBJECTS =	octet.o inetutil4.o ifspec.o ifaddrlist.o eh.o tq.o

	include ../../Makefile.lib
	include ../../Makefile.rootfs

	LIBS =		$(DYNLIB) $(LINTLIB)

	SRCDIR =	../common
	COMDIR =	$(SRC)/common/net/dhcp
	SRCS =		$(COMDIR)/octet.c $(SRCDIR)/inetutil4.c \
			$(SRCDIR)/ifspec.c $(SRCDIR)/eh.c $(SRCDIR)/tq.c \
			$(SRCDIR)/ifaddrlist.c

	$(LINTLIB):=	SRCS = $(SRCDIR)/$(LINTSRC)
	LDLIBS +=	-lsocket -lc

	CFLAGS +=	$(CCVERBOSE)
	CPPFLAGS +=	-I$(SRCDIR)

	.KEEP_STATE:

	all: $(LIBS)

	lint: lintcheck

	pics/%.o: $(COMDIR)/%.c
		$(COMPILE.c) -o $@ $<
		$(POST_PROCESS_O)

	include ../../Makefile.targ

The mapfile for libinetutil is named `mapfile-vers' and resides in $(SRCDIR),
so the MAPFILES definition is omitted, defaulting to $(SRCDIR)/mapfile-vers.

Note that for libinetutil, not all of the object files come from SRCDIR.  To
support this, an alternate source file directory named COMDIR is defined, and
the source files listed in SRCS are specified using both COMDIR and SRCDIR.
Additionally, a special build rule is provided to build object files from the
sources in COMDIR; the rule uses COMPILE.c and POST_PROCESS_O so that any
changes to the compilation and object-post-processing phases will be
automatically picked up.

The ISA-Specific Makefiles
--------------------------

As the name implies, your ISA-specific Makefiles should contain macros and
rules that cannot be expressed in an ISA-independent way.  Usually, the only
rule you will need to put here is `install', which has different dependencies
for 32-bit and 64-bit libraries.  For instance, here are the ISA-specific
Makefiles for libinetutil:

	sparc/Makefile:

		include ../Makefile.com

		install: all $(ROOTLIBS) $(ROOTLINKS) $(ROOTLINT)

	sparcv9/Makefile:

		include ../Makefile.com
		include ../../Makefile.lib.64

		install: all $(ROOTLIBS64) $(ROOTLINKS64)

	i386/Makefile:

		include ../Makefile.com

		install: all $(ROOTLIBS) $(ROOTLINKS) $(ROOTLINT)

	amd64/Makefile:

		include ../Makefile.com
		include ../../Makefile.lib.64

		install: all $(ROOTLIBS64) $(ROOTLINKS64)

Observe that there is no .KEEP_STATE directive in these Makefiles, since all
of these Makefiles include libinetutil/Makefile.com, and it already has a
.KEEP_STATE directive.  Also, note that the 64-bit Makefiles also include
Makefile.lib.64, which overrides some of the definitions contained in the
higher level Makefiles included by the common Makefile so that 64-bit
compiles work correctly.

CTF Data in Libraries
---------------------

By default, all position-independent objects are built with CTF data using
ctfconvert, which is then merged together using ctfmerge when the shared
object is built.  All C-source objects processed via ctfmerge need to be
processed via ctfconvert or the build will fail.  Objects built from non-C
sources (such as assembly or C++) are silently ignored for CTF processing.

Filter libraries that have no source files will need to explicitly disable
CTF by setting CTFMERGE_LIB to ":"; see libw/Makefile.com for an example.

More Information
----------------

Other issues and questions will undoubtedly arise while you work on your
library's Makefiles.  To help in this regard, a number of libraries of
varying complexity have been updated to follow the guidelines and practices
outlined in this document:

	lib/libdhcputil

	  Example of a simple 32-bit only library.

	lib/libdhcpagent

	  Example of a simple 32-bit only library that obtains its sources
	  from multiple directories.

	lib/ncad_addr

	  Example of a simple loadable module.

	lib/libipmp

	  Example of a simple library that builds a message catalog.

	lib/libdhcpsvc

	  Example of a Makefile hierarchy for a library and a collection
	  of related pluggable modules.

	lib/lvm

	  Example of a Makefile hierarchy for a collection of related
	  libraries and pluggable modules.

	  Also an example of a Makefile hierarchy that supports the
	  _dc target for domain and category specific messages.

Of course, if you still have questions, please do not hesitate to send email
to the ON gatekeepers.

#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License (the "License").
# You may not use this file except in compliance with the License.
#
# You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
# or http://www.opensolaris.org/os/licensing.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at usr/src/OPENSOLARIS.LICENSE.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information: Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
# Copyright (c) 2006, 2010, Oracle and/or its affiliates. All rights reserved.
#

Mapfiles and versioning in ON
=============================

1.0 Objective of this README

This README describes the engineering practices of creating and updating
visible library interfaces.  It describes various kinds of actions that
typically occur as libraries are evolved, and shows how interface
specifications are affected or updated in accordance.  It tells you what
you must do as a shared library developer if you:

	1. Make interface additions to an existing library
		- add a Public interface
		- add a Private interface
	2. Update an interface in an existing library
		- remove an existing interface
		- promote a Private interface to Public
		- scope a Private interface to local
		- move an interface from one library to another
		- copy interfaces which are part of the standard to a new or
		  existing library
	3. Introduce a new library
		- source directory hierarchy
		- creation of the "mapfile-vers" file
		- Makefiles
	4. Make an entire library obsolete before end-of-life
		- introduce SUNWobsolete to the "mapfile-vers" file

-------------------------------------------------------------------------------

2.0 What's a mapfile?

Mapfiles are used to tell the link-editor ("ld") all sorts of things about
how to generate an executable file or a shared object from a collection of
relocatable objects, such as generated by a compiler.  For all the gory
details, see the Solaris Linker and Libraries Guide, which can be found
under http://docs.sun.com.

There are two versions of the mapfile language accepted by the link-editor.
Version 1 derives from AT&T System V Release 4 Unix. Version 2 is a newer
syntax specific to Solaris. All mapfiles in the OSnet (ON consolidation) are
required to use version 2 syntax. Note that every mapfile using version 2
syntax must start with the line:

        $mapfile_version 2

Here, we are only concerned with specifying externally-visible interfaces
for shared libraries (shared objects) and with specifying their versions
for ABI (Application Binary Interface) purposes.  For these purposes, we
only need to deal with a subset of the mapfile language.

There should be a "mapfile-vers" file associated with every shared library
and it should reside in the common source directory for that library, most
often in a "common" directory.  This is the usual layout of a library's
top-level directory (usr/src/lib/libwombat):
	Makefile       amd64/         i386/          sparcv9/
	Makefile.com   common/        sparc/

The "common" directory contains the source files and other common files
for the library:
	bat.c              libwombat_impl.h   mapfile-vers       wom.c
	libwombat.h        llib-lwombat       util.c             wombat.c

The mapfile's name is, by convention, "mapfile-vers" because it is used
for only two purposes: to specify externally-visible interface names while
suppressing visibility of all other names, and to specify their respective
unique version names.

-------------------------------------------------------------------------------

3.0 Contents of mapfile-vers

The structure of mapfile-vers is best explained by an example
(the license notification and copyright notice is omitted here
for brevity):

$mapfile_version 2

SYMBOL_VERSION SUNW_1.2 {	# update to libwombat, Solaris 10
    global:
	wb_readv;
	wb_stat;
	wb_writev;
} SUNW_1.1;

SYMBOL_VERSION SUNW_1.1 {	# first release of libwombat, Solaris 9
    global:
	wb_read;
	wb_write;
};

SYMBOL_VERSION SUNWprivate {	# private libwombat symbols
    global:
	wb_add;
	wb_delete;
	wb_search;
    local:
	*;
};

The SUNW_1.* names are the Public version names for the library.
There should be at most one version name for each release of Solaris,
with the minor number incremented by one over the previous version.

If no update to the Public-visible names in the library is made
in a given Solaris release, no new version name should be generated
for that release.  If multiple updates are made to the library at
different points in the development of a given release of Solaris,
only one version should be used for the entire release.

So, for example, if an update to libwombat is made in Solaris 11,
you would add "SUNW_1.3" at the start of the mapfile:

SYMBOL_VERSION SUNW_1.3 {	# update to libwombat, Solaris 11
    global:
	wb_lseek;
} SUNW_1.2;

Each version must inherit all symbols from its preceding version,
specified at the ending "}" for each version.  SUNW_1.1 does not
inherit any symbols.  SUNWprivate, if present, stands alone.

The two lines in SUNWprivate:
    local:
	*;
ensure that no symbols other than those listed in the mapfile are
visible to clients of the library.  If there is no SUNWprivate,
these two lines should appear in SUNW_1.1.

For maintainability, the list of names in each version block should
be sorted in dictionary order (sort -d).  Please comply.

The version 2 mapfile language supports a simple mechanism for conditional
input, in which lines in the mapfile apply only to a specific platform or
ELFCLASS (32/64-bit). This mechanism works very much like the #if/#endif
feature of the C preprocessor. For instance, the following mapfile declares
a version SUNW_1.1 that always exports a symbol foo, and also exports
the symbol bar on 32-bit sparc platforms:

$mapfile_version
SYMBOL_VERSION SUNW_1.1 {
        foo;
$if _sparc && _ELF32
	bar;
$endif
};

Conditional input can be used if there are ISA-specific library interfaces
not common to all instances of the library. It is the preferred method for
expressing platform specific items, as long as the differences are simple
(which is almost always the case).  For example, see libproc, or, if you
are masochistic, libc or libnsl.

In addition to conditional input, there is a second heavier weight mechanism
for expressing ISA-specific differences. In addition to the common mapfile:
	common/mapfile-vers
some libraries may have ISA-specific supplemental mapfiles, one in each
of the ISA directories:
	amd64/mapfile-vers
	i386/mapfile-vers
	sparc/mapfile-vers
	sparcv9/mapfile-vers
The ISA-specific mapfiles look like the common mapfile, except that only
the ISA-specific names appear.  The version names are the same as those
in the common mapfile, but only non-empty version instances are present
and no inheritance specification is present. The link-editor reads the
information from the common and ISA-specific mapfiles and merges them
in memory into a single description used to create the resulting object.

ISA-specific mapfiles were used with the version 1 mapfile language, which
lacked conditional input. Their use is rare now, as conditional input is
generally preferred. However, it is important to use conditional input
carefully, or the resulting mapfile can be extremly difficult to read.

-------------------------------------------------------------------------------

4.0 Making interface additions to an existing library

4.1 Adding a Public interface

The first engineer to update the existing mapfile-vers file in a release needs
to identify the current highest version name and properly increment the minor
version number by 1 to be the new version name.  If this is the first Public
interface in the shared object, a new SUNW_1.1 version name must be introduced.

The major revision number is incremented whenever an incompatible change is
made to an interface.  This could be the case if an API changes so dramatically
as to invalidate dependencies.  This rarely occurs in practice.  It also
requires changing the suffix of the shared object from, say, .so.1 to .so.2
and introducing code to continue to ship the .so.1 version of the library.

The minor revision number is incremented whenever one or more new interfaces
is added to a library.  Note that the minor number is not incremented on every
putback that makes an interface addition to the library.  Rather, it is
incremented at most once per (external to Sun) release of the library.

4.2 Adding a Private interface

Private interfaces are the non-ABI interfaces of the library.  Unlike
introducing a Public interface, a new entry is simply added to the
SUNWprivate version.  No minor number increment is necessary.

If this interface happens to be the first Private interface introduced
into the library, the SUNWprivate version must be created (no major.minor
version numbers).  It inherits nothing and nothing inherits from it.

If the library already has Private interfaces, they may have numbered version
names like SUNWprivate_m.n (due to errors of the past).  If so, just use the
highest numbered private version name to version the new interface.  There
is no need to introduce a new private version name.  Be careful not to use
a lower numbered private version name; doing so can cause runtime errors
(as opposed to load time errors) when running an application with older
versions of the library.

There are libraries in the OSnet consolidation that contain only private
interfaces. In such libraries, the SUNWprivate_m.n may be incremented
to ensure that the programs that depend on them are built and delivered as a
integrated unit. A notable example of this is libld.so (usr/src/cmd/sgs/libld),
which contains the implementation of the link-editor, the public interface to
which is provided by the ld command. When making a modification to the interface
of such a library, you should follow the convention already in place.

4.3 Adding new public interfaces in an update release

Adding new public interfaces in an update release requires careful
coordination with the next marketing release currently under development.
Multiple updates ship during the period before the next marketing release
ships, and since it is generally impossible to know the full set of new
interfaces in the next marketing release until late in its development
(after multiple updates have shipped) it must be assumed that not all
interfaces added to the next marketing release will be added to an update.

Consequently, the new version number for an update cannot be a minor
increment, but must be a micro increment.  For example, if Release N
has version number SUNW_1.3 and Release N+1 will have SUNW_1.4, then
interfaces added to an update of Release N must have micro numbers such
as SUNW_1.3.1, SUNW_1.3.2, etc.  (note that the micro number is not
directly tied to the update number: SUNW_1.3.1 may appear in Update 2).
The micro versions form an inheritance chain that is inserted between
two successive minor versions.  For example, the mapfile-vers file for
minor release "N+1" to reflect its inclusion of micro releases will
look like the following:

$mapfile_version 2

SYMBOL_VERSION SUNW_1.4 {	# release N+1
    global:
	...
} SUNW_1.3.2;

SYMBOL_VERSION SUNW_1.3.2 {	# micro release 2 (e.g., release NU3)
    global:
	...
} SUNW_1.3.1;

SYMBOL_VERSION SUNW_1.3.1 {	# micro release 1 (e.g., release NU2)
    global:
	...
} SUNW_1.3;

SYMBOL_VERSION SUNW_1.3 {	# release N
    global:
	...
} SUNW_1.2;

SYMBOL_VERSION SUNW_1.2 {	# release N-1
    global:
	...
} SUNW_1.1;

SYMBOL_VERSION SUNW_1.1 {	# first release
    global:
	...
};

SYMBOL_VERSION SUNW_private {	# same in all releases
    global:
	...
    local:
	*;
};

The corresponding update/patch mapfile-vers file will be identical
except for the exclusion of SUNW_1.4.

Those interfaces which are only present in Release N+1 are always put
into the next minor version set, SUNW_1.4.

Thus when adding a new public interface to an update, both the mapfiles
of the update release and next marketing release must be modified to be
consistent.  The update versions should not be added to the marketing
release until the putback to the update release has occurred, to avoid
timing problems with the update releases (it's all too easy for projects
to slip out of updates, or to change ordering).

-------------------------------------------------------------------------------

5.0 How to update an interface in an existing library

5.1 Removing an existing interface

5.1.1 Moving a Public interface

No Public interfaces should ever be removed from any mapfile.

To move an interface from one library to (say) libc, the code has to be
deleted from the library and added to libc, then the mapfile for the
library has to have the interface's entry changed from:
	getfoobar;
to:
	getfoobar       { TYPE = FUNCTION; FILTER = libc.so.1 };
See, for example, libnsl's common/mapfile-vers file.

Follow the rules for adding a new interface for the necessary changes
to libc's mapfile to accommodate the moved interface.  In particular,
the new interface must be added to the current highest libc version.

To move an entire library into libc, look at what has already been done
for libthread, libaio, and librt.

5.1.2 Removing a Private interface

Deletion of Private interfaces is allowed, but caution should be taken;
it should first be established that the interface is not being used.
To remove a Private interface, simply delete the corresponding entry
for that symbol from the mapfile's SUNWprivate section.

Do not forget to delete these Public or Private interfaces from the library's
header files as well as from the code that implements the interfaces.

5.2 Promoting a Private interface to Public

This is similar to what's done when adding a Public interface.  Promoting an
existing Private interface to a Public one only requires a change to the
existing interface definition.  Private interfaces have the symbol version name
"SUNWprivate" associated with them.  To make the interface a Public one, the
interface must be put into a set associated with the current Public release
level of the library.

As an example, if we were modifying libwombat.so.1 and its version in the
last release of Solaris was SUNW_1.23, any new ABI introduced in the next
release would be put into a version called SUNW_1.24.  Therefore, whether
you wish to promote an existing Private interface to Public, or to introduce
a new Public interface, this (next successive minor numbered version level)
would be the version that it would be associated with.

5.3 Scoping a Private interface local

Any interfaces not present in the mapfile-vers file will be scoped local
due to the presence of the
    local:
	*;
lines discussed earlier. This ensures that such interfaces will not be visible
outside the library.  To move an interface from Private to local scope, simply
remove the Private interface from the mapfile-vers file and the header file
to prevent it from being exported.  This may require moving the Private
interface into a library-private header file.  Scope reduction of Public
interfaces is not allowed without specific ARC review and approval.

For the interface to be used in more than one file within the library, it
should be in a header file that can be included by each file in the library
that uses the interface.  For example:

	#include "libprivate.h"

5.4 How to copy interfaces which are part of a standard to a new or existing
    library

SYSVABI and SISCD are reserved version names for interfaces listed in the
System V Interface Definition and the Sparc Compliance Definition.  Avoid using
these version names when copying the implementation of standard interfaces to
another library.  Instead, use SUNW_1.1 for a new library, and SUNW_m.n for
an existing library (where m.n is the next release version; i.e., if the
last version was SUNW_1.18, then you should version the interfaces with
SUNW_1.19).

-------------------------------------------------------------------------------

6.0 Introducing a new library

6.1 Directories

The normal discipline for introducing a new library in OS/Net is to create a
new subdirectory of /usr/src/lib.  The interface definition discipline is to
create a common/mapfile-vers file for the new library.  If we were introducing
a new foo library, libfoo, we'd create /usr/src/lib/libfoo containing:
	Makefile       amd64/         i386/          sparcv9/
	Makefile.com   common/        sparc/
The common subdirectory would contain the normal source files plus the
mapfile-vers file.  See usr/src/lib/README.Makefiles for directions on
how to organize the Makefiles.

6.2 The mapfile

The new common/mapfile-vers file would contain:

$mapfile_version 2

SYMBOL_VERSION SUNW_1.1 {	# first release of libfoo
    global:
	...
};

SYMBOL_VERSION SUNWprivate {
    global:
	...
    local:
	*;
};

If there are no Public interfaces, the SUNW_1.1 section would be omitted.
If there are no Private interfaces, the SUNWprivate section would be
omitted and the two lines:
    local:
	*;
would be moved into SUNW_1.1

To decide which interfaces are Public (part of the ABI) and which are Private
(unstable interfaces not intended to be used by third party applications or
unbundled products), the heuristic which works to a first approximation is
that if it has a man page then it's Public.  Also, it is really the ARC case
for the new interfaces that prescribes which interfaces are Public and
which are not (hence, which interfaces have man pages and which do not).

For maintainability, the list of names in each version block should
be sorted in dictionary order (sort -d).  Please comply.

-------------------------------------------------------------------------------

7.0 Make an entire library obsolete

7.1 Introduce SUNWobsolete version

Use this version name not for specific interfaces but for marking an entire
library as obsolete.  The existing public/private version names are left
unchanged, but a new SUNWobsolete version is created with no symbols in it.
This becomes a tag by which the obsolescence of the library can be recognized.
There is no numbering of this version name.

$mapfile_version 2

SYMBOL_VERSION SUNWobsolete {
    global:
	SUNWobsolete;	# This is the only way to do it.
} SUNW_1.2;

SYMBOL_VERSION SUNW_1.2 {
...

-------------------------------------------------------------------------------

8.0 Documentation

For further information, please refer to the following documents:

	"Solaris Linker and Libraries Guide", http://docs.sun.com
	/shared/ON/general_docs/scoping-rules.fm.ps

For information on the now-obsolete spec files, used in Solaris releases
7 through 10, see:
	/shared/ON/general_docs/README.spec
	/shared/ON/general_docs/libspec-rules.ps
	/shared/ON/general_docs/spectrans/*