1/* $NetBSD: msg.mi.en,v 1.44 2022/07/22 16:51:14 christos Exp $ */ 2 3/* 4 * Copyright 1997 Piermont Information Systems Inc. 5 * All rights reserved. 6 * 7 * Written by Philip A. Nelson for Piermont Information Systems Inc. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. The name of Piermont Information Systems Inc. may not be used to endorse 18 * or promote products derived from this software without specific prior 19 * written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY PIERMONT INFORMATION SYSTEMS INC. ``AS IS'' 22 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 23 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 24 * ARE DISCLAIMED. IN NO EVENT SHALL PIERMONT INFORMATION SYSTEMS INC. BE 25 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 31 * THE POSSIBILITY OF SUCH DAMAGE. 32 * 33 */ 34 35/* MI Message catalog -- english, machine independent */ 36 37message sysinst_message_language 38{Installation messages in English} 39 40message sysinst_message_locale 41{en_US.ISO8859-1} 42 43message out_of_memory {Out of memory!} 44message Yes {Yes} 45message No {No} 46message All {All} 47message Some {Some} 48message None {None} 49message none {none} 50message OK {OK} 51message ok {ok} 52message On {On} 53message Off {Off} 54message unchanged {unchanged} 55message Delete {Delete?} 56 57message install 58{install} 59 60message reinstall 61{reinstall sets for} 62 63message upgrade 64{upgrade} 65 66message hello 67{NetBSD/@@MACHINE@@ @@VERSION@@ 68 69This menu-driven tool is designed to help you install NetBSD to a hard 70disk, or upgrade an existing NetBSD system, with a minimum of work. 71In the following menus type the reference letter (a, b, c, ...) to 72select an item, or type CTRL+N/CTRL+P to select the next/previous item. 73The arrow keys and Page-up/Page-down may also work. 74Activate the current selection from the menu by typing the enter key. 75} 76 77message thanks 78{Thank you for using NetBSD! 79} 80 81message installusure 82{You have chosen to install NetBSD on your hard disk. This will change 83information on your hard disk. You should have made a full backup 84before this procedure! This procedure will do the following things: 85 a) Partition your disk 86 b) Create new BSD file systems 87 c) Load and install distribution sets 88 d) Some initial system configuration 89 90(After you enter the partition information but before your disk is 91changed, you will have the opportunity to quit this procedure.) 92 93Shall we continue? 94} 95 96message upgradeusure 97{Ok, let's upgrade NetBSD on your hard disk. As always, this will 98change information on your hard disk. You should have made a full backup 99before this procedure! Do you really want to upgrade NetBSD? 100(This is your last warning before this procedure starts modifying your 101disks.) 102} 103 104message reinstallusure 105{Ok, let's unpack the NetBSD distribution sets to a bootable hard disk. 106This procedure just fetches and unpacks sets onto a pre-partitioned 107bootable disk. It does not label disks, upgrade bootblocks, or save 108any existing configuration info. (Quit and choose `install' or 109`upgrade' if you want those options.) You should have already done an 110`install' or `upgrade' before starting this procedure! 111 112Do you really want to reinstall NetBSD distribution sets? 113(This is your last warning before this procedure starts modifying your 114disks.) 115} 116 117message mount_failed 118{Mounting %s failed. Continue? 119} 120 121message nodisk 122{I can not find any hard disks for use by NetBSD. You will be 123returned to the original menu. 124} 125 126message onedisk 127{I found only one disk, %s. 128Therefore I assume you want to %s NetBSD on it. 129} 130 131message ask_disk 132{On which disk do you want to %s NetBSD? } 133 134message Available_disks 135{Available disks} 136 137message Available_wedges {Existing "wedges"} 138 139message heads 140{heads} 141 142message sectors 143{sectors} 144 145message mountpoint 146{mount point (or 'none')} 147 148message cylname 149{cyl} 150 151message secname 152{sec} 153 154message megname 155{MB} 156 157message gigname 158{GB} 159 160/* Called with: Example 161 * $0 = device name wd0 162 * $1 = partitioning scheme name Guid Partition Table 163 * $2 = short version of $1 GPT 164 * $3 = disk size for NetBSD 3TB 165 * $4 = full install size min. 127M 166 * $5 = install with X min. 427M 167 */ 168message layout_prologue_none 169{You can use a simple editor to set the sizes of the NetBSD partitions, 170or apply the default partition sizes and contents.} 171 172/* Called with: Example 173 * $0 = device name wd0 174 * $1 = partitioning scheme name Guid Partition Table 175 * $2 = short version of $1 GPT 176 * $3 = disk size for NetBSD 3TB 177 * $4 = full install size min. 127M 178 * $5 = install with X min. 427M 179 */ 180 181message layout_prologue_existing 182{If you do not want to use the existing partitions, you can 183use a simple editor to set the sizes of the NetBSD partitions, 184or remove existing ones and apply the default partition sizes.} 185 186/* Called with: Example 187 * $0 = device name wd0 188 * $1 = partitioning scheme name Guid Partition Table 189 * $2 = short version of $1 GPT 190 * $3 = disk size for NetBSD 3TB 191 * $4 = full install size min. 127M 192 * $5 = install with X min. 427M 193 */ 194message layout_main 195{ 196 197You will then be given the opportunity to change any of the partition 198details. 199 200The NetBSD (or free) part of your disk ($0) is $3. 201 202A full installation requires at least $4 without X and 203at least $5 if the X sets are included.} 204 205message Choose_your_size_specifier 206{Choosing mega- or gigabytes will give partition sizes close 207to your choice, but aligned to cylinder boundaries. 208Choosing sectors will allow you to more accurately specify 209the sizes. On most disks, there is little to gain from 210cylinder alignment. On very old disks, it is most efficient 211to choose partition sizes that are exact multiples of your actual 212cylinder size. 213 214Choose your size specifier} 215 216message ptnsizes 217{You can now change the sizes for the system partitions. The default is 218to allocate all the space to the root file system. However, you may wish 219to have separate /usr (additional system files), /var (log files etc) 220or /home (users' home directories) file systems. 221 222Free space will be added to the partition marked with a '+'.} 223 224/* Called with: Example 225 * $0 = list of marker explanations '=' existining, '@' external 226 */ 227message ptnsizes_markers {Other markers: $0 partition.} 228message ptnsizes_mark_existing {'=' existing} 229message ptnsizes_mark_external {'@' external} 230 231message ptnheaders_size {Size} 232message ptnheaders_filesystem {Filesystem} 233 234message askfsmount 235{Mount point?} 236 237message askfssize 238{Size for %s in %s?} 239 240message askunits 241{Change input units (sectors/cylinders/MB/GB)} 242 243message NetBSD_partition_cant_change 244{NetBSD partition} 245 246message Whole_disk_cant_change 247{Whole disk} 248 249message Boot_partition_cant_change 250{Boot partition} 251 252message add_another_ptn 253{Add a user defined partition} 254 255/* Called with: Example 256 * $0 = free space 1.4 257 * $1 = size unit GB 258 */ 259message fssizesok 260{Go on. Free space $0 $1.} 261 262/* Called with: Example 263 * $0 = missing space 1.4 264 * $1 = size unit GB 265 */ 266message fssizesbad 267{Abort. Not enough space, $0 $1 missing!} 268 269message startoutsidedisk 270{The start value you specified is beyond the end of the disk. 271} 272 273message endoutsidedisk 274{With this value, the partition end is beyond the end of the disk. 275Your partition size has been truncated.} 276 277/* Called with: Example 278 * $0 = device name wd0 279 * $1 = partitioning scheme name Master Boot Record (MBR) 280 * $2 = short version of $1 MBR 281 * $3 = disk size 3TB 282 * $4 = size limit 2TB 283 */ 284message toobigdisklabel 285{ 286This disk ($0) is too large ($3) for a $2 partition table (max $4), 287hence only the start of the disk is usable. 288} 289 290message cvtscheme_hdr {What would you like to do to the existing partitions?} 291message cvtscheme_keep {keep (use only part of disk)} 292message cvtscheme_delete {delete (all data will be lost!)} 293message cvtscheme_convert {convert to another partitioning method} 294message cvtscheme_abort {abort} 295message cvtscheme_error 296{Could not convert all partitions} 297 298/* Called with: Example 299 * $0 = device name wd0 300 * $1 = partitioning scheme name BSD disklabel 301 * $2 = short version of $1 disklabel 302 * $3 = optional install flag (I)nstall, 303 * $4 = additional flags description (B)ootable 304 * $5 = total size 2TB 305 * $6 = free size 244MB 306 */ 307message fspart 308{We now have your $2 partitions for $0 below. 309This is your last chance to change them. 310 311Flags: $3(N)ewfs$4. Total size: $5, free: $6} 312 313message ptnheaders_start {Start} 314message ptnheaders_end {End} 315message ptnheaders_fstype {FS type} 316 317message partition_sizes_ok 318{Partition sizes ok} 319 320message edfspart 321{The current values for this partition are 322displayed below. 323 324Select the field you wish to change:} 325 326message ptn_newfs {newfs} 327message ptn_mount {mount} 328message ptn_mount_options {mount options} 329message ptn_mountpt {mount point} 330 331message toggle 332{Toggle} 333 334message restore 335{Restore original values} 336 337message Select_the_type 338{Select the type} 339 340message other_types 341{other types} 342 343/* Called with: Example 344 * $0 = valid partition shortcuts a-e 345 * $1 = maximum allowed 4292098047 346 * $2 = size unit MB 347 */ 348message label_size_head 349{Special values that can be entered for the size value: 350 -1: use until the end} 351 352/* Called with: Example 353 * $0 = valid partition shortcuts a-e 354 * $1 = maximum allowed 4292098047 355 * $2 = size unit MB 356 */ 357message label_size_part_hint 358{ $0: use until the given partition} 359 360 361/* Called with: Example 362 * $0 = valid partition shortcuts a-e 363 * $1 = maximum allowed 4292098047 364 * $2 = size unit MB 365 */ 366message label_size_tail {Size (max $1 $2)} 367 368/* Called with: Example 369 * $0 = valid partition shortcuts a-e 370 * $1 = valid free space shortcuts f-h 371 * $2 = size unit MB 372 */ 373message label_offset_head 374{Special values that can be entered for the offset value: 375 -1: start at the beginning} 376 377/* Called with: Example 378 * $0 = valid partition shortcuts a-e 379 * $1 = valid free space shortcuts f-h 380 * $2 = size unit MB 381 */ 382message label_offset_part_hint 383{ $0: start at the end of given partition} 384 385/* Called with: Example 386 * $0 = valid partition shortcuts a-e 387 * $1 = valid free space shortcuts f-h 388 * $2 = size unit MB 389 */ 390message label_offset_space_hint 391{ $1: start at the beginning of given free space} 392 393/* Called with: Example 394 * $0 = valid partition shortcuts a-e 395 * $1 = valid free space shortcuts f-h 396 * $2 = size unit MB 397 */ 398message label_offset_tail {Start ($2)} 399 400message invalid_sector_number 401{Badly formed number} 402 403message packname 404{Please enter a name for your NetBSD disk} 405 406message lastchance 407{Ok, we are now ready to install NetBSD on your hard disk (%s). Nothing has been 408written yet. This is your last chance to quit this process before anything 409gets changed. 410 411Shall we continue? 412} 413 414message disksetupdone 415{Ok, the first part of the procedure is finished. Sysinst has 416written a disklabel to the target disk, and newfs'ed and fsck'ed 417the new partitions you specified for the target disk. 418} 419 420message disksetupdoneupdate 421{Ok, the first part of the procedure is finished. Sysinst has 422written a disklabel to the target disk, and fsck'ed the new 423partitions you specified for the target disk. 424} 425 426message openfail 427{Could not open %s, error message was: %s. 428} 429 430/* Called with: Example 431 * $0 = device name /dev/wd0a 432 * $1 = mount path /usr 433 */ 434message mountfail 435{mount of device $0 on $1 failed. 436} 437 438message extractcomplete 439{The extraction of the selected sets for NetBSD-@@VERSION@@ is complete. 440The system is now able to boot from the selected hard disk. To complete 441the installation, sysinst will give you the opportunity to configure 442some essential things first. 443} 444 445message instcomplete 446{The installation of NetBSD-@@VERSION@@ is now complete. The system 447should boot from hard disk. Follow the instructions in the INSTALL 448document about final configuration of your system. We also recommend 449reading the afterboot(8) manpage; it contains a list of things to be 450checked after the first complete boot. 451 452At a minimum, you should edit /etc/rc.conf to match your needs. See 453/etc/defaults/rc.conf for the default values. 454} 455 456message upgrcomplete 457{The upgrade to NetBSD-@@VERSION@@ is now complete. You will 458now need to follow the instructions in the INSTALL document as to 459what you need to do to get your system reconfigured for your situation. 460Remember to (re)read the afterboot(8) manpage as it may contain new 461items since your last upgrade. 462} 463 464 465message unpackcomplete 466{Unpacking additional release sets of NetBSD-@@VERSION@@ is now complete. 467You will now need to follow the instructions in the INSTALL document 468to get your system reconfigured for your situation. 469The afterboot(8) manpage can also be of some help. 470 471If you unpacked the etc set, you will need to edit /etc/rc.conf to get a 472multi-user system. At a minimum, you will need to change rc_configured=NO 473to rc_configured=YES. 474} 475 476message distmedium 477{Your disk is now ready for installing the kernel and the distribution 478sets. As noted in your INSTALL notes, you have several options. For 479ftp or nfs, you must be connected to a network with access to the proper 480machines. 481 482Sets selected %d, processed %d, Next set %s. 483 484} 485 486message distset 487{The NetBSD distribution is broken into a collection of distribution 488sets. There are some basic sets that are needed by all installations 489and there are some other sets that are optional. You may choose to install 490a core set (Minimal installation), all of them (Full installation), or a custom 491group of sets (Custom installation). 492} 493 494/* Called with: Example 495 * $0 = sets suffix .tgz 496 * $1 = URL protocol used ftp 497 */ 498message ftpsource 499{The following are the $1 site, directory, user, and password that 500will be used. If "user" is "ftp", then the password is not needed. 501 502} 503 504message email 505{e-mail address} 506 507message dev 508{device} 509 510/* Called with: Example 511 * $0 = sets suffix .tgz 512 */ 513message nfssource 514{Enter the nfs host and server directory where the distribution is located. 515Remember, the directory should contain the $0 files and 516must be nfs mountable. 517 518} 519 520message floppysource 521{Enter the floppy device to be used and transfer directory on the target 522file system. The set files must be in the root directory of the floppies. 523 524} 525 526/* Called with: Example 527 * $0 = sets suffix .tgz 528 */ 529message cdromsource 530{Enter the CDROM device to be used and directory on the CDROM where 531the distribution is located. 532Remember, the directory should contain the $0 files. 533 534} 535 536message No_cd_found 537{Could not locate a CD medium in any drive with the distribution sets! 538Enter the correct data manually, or insert a disk and retry. 539} 540 541message abort_install 542{Cancel installation} 543 544message source_sel_retry 545{Back to source selection & retry} 546 547message Available_cds 548{Available CDs } 549 550message ask_cd 551{Multiple CDs found. Please select the one containing the install CD.} 552 553message cd_path_not_found 554{The installation sets have not been found at the default location on this 555CD. Please check the device and path name.} 556 557/* Called with: Example 558 * $0 = sets suffix .tgz 559 */ 560message localfssource 561{Enter the unmounted local device and directory on that device where 562the distribution is located. 563Remember, the directory should contain the $0 files. 564 565} 566 567/* Called with: Example 568 * $0 = sets suffix .tgz 569 */ 570message localdir 571{Enter the already-mounted local directory where the distribution is located. 572Remember, the directory should contain the $0 files. 573 574} 575 576message filesys 577{file system} 578 579message nonet 580{I can not find any network interfaces for use by NetBSD. You will be 581returned to the previous menu. 582} 583 584message netup 585{The following network interfaces are active: %s 586Does one of them connect to the required server?} 587 588message asknetdev 589{Which network device would you like to use?} 590 591message netdevs 592{Available interfaces} 593 594message netinfo 595{To be able to use the network, we need answers to the following: 596 597} 598 599message net_domain 600{Your DNS domain} 601 602message net_host 603{Your host name} 604 605message net_ip 606{Your IPv4 address} 607 608message net_srv_ip 609{Server IPv4 address} 610 611message net_mask 612{IPv4 Netmask} 613 614message net_namesrv 615{Your name server} 616 617message net_defroute 618{IPv4 gateway} 619 620message net_media 621{Network media type} 622 623message net_ssid 624{Wi-Fi SSID?} 625 626message net_passphrase 627{Wi-Fi passphrase?} 628 629message netok 630{The following are the values you entered. 631 632DNS Domain: %s 633Host Name: %s 634Nameserver: %s 635Primary Interface: %s 636Media type: %s 637Host IP: %s 638Netmask: %s 639IPv4 Gateway: %s 640} 641 642message netok_slip 643{The following are the values you entered. Are they OK? 644 645DNS Domain: %s 646Host Name: %s 647Nameserver: %s 648Primary Interface: %s 649Media type: %s 650Host IP: %s 651Server IP: %s 652Netmask: %s 653IPv4 Gateway: %s 654} 655 656message netokv6 657{IPv6 autoconf: %s 658} 659 660message netok_ok 661{Are they OK?} 662 663message wait_network 664{ 665Waiting while network interface comes up. 666} 667 668message resolv 669{Could not create /etc/resolv.conf. Install aborted. 670} 671 672/* Called with: Example 673 * $0 = target prefix /target 674 * $1 = error message No such file or directory 675 */ 676message realdir 677{Could not change to directory $0: $1. 678Install aborted.} 679 680message delete_xfer_file 681{Delete after install} 682 683/* Called with: Example 684 * $0 = set name base 685 */ 686message notarfile 687{Release set $0 does not exist.} 688 689message endtarok 690{All selected distribution sets unpacked successfully.} 691 692message endtar 693{There were problems unpacking distribution sets. 694Your installation is incomplete. 695 696You selected %d distribution sets. %d sets couldn't be found 697and %d were skipped after an error occurred. Of the %d 698that were attempted, %d unpacked without errors and %d with errors. 699 700Aborting installation. Please recheck your distribution source 701and consider reinstalling sets from the main menu.} 702 703message abort_inst {Install aborted.} 704message abort_part {Partitioning aborted.} 705 706message abortinst 707{The distribution was not successfully loaded. You will need to proceed 708by hand. Installation aborted. 709} 710 711message abortupgr 712{The distribution was not successfully loaded. You will need to proceed 713by hand. Upgrade aborted. 714} 715 716message abortunpack 717{Unpacking additional sets was not successful. You will need to 718proceed by hand, or choose a different source for release sets and try 719again. 720} 721 722message createfstab 723{There is a big problem! Can not create /mnt/etc/fstab. Bailing out! 724} 725 726 727message noetcfstab 728{Help! No /etc/fstab in target disk %s. Aborting upgrade. 729} 730 731message badetcfstab 732{Help! Can't parse /etc/fstab in target disk %s. Aborting upgrade. 733} 734 735message X_oldexists 736{I cannot save %s/bin/X as %s/bin/X.old, because the 737target disk already has an %s/bin/X.old. Please fix this before 738continuing. 739 740One way is to start a shell from the Utilities menu, examine the 741target %s/bin/X and %s/bin/X.old. If 742%s/bin/X.old is from a completed upgrade, you can rm -f 743%s/bin/X.old and restart. Or if %s/bin/X.old is from 744a recent, incomplete upgrade, you can rm -f %s/bin/X and mv 745%s/bin/X.old to %s/bin/X 746 747Aborting upgrade.} 748 749message netnotup 750{There was a problem in setting up the network. Either your gateway 751or your nameserver was not reachable by a ping. Do you want to 752configure your network again? ("No" allows you to continue anyway 753or abort the install process.) 754} 755 756message netnotup_continueanyway 757{Would you like to continue the install process anyway, and assume 758that the network is working? ("No" aborts the install process.) 759} 760 761message makedev 762{Making device nodes ... 763} 764 765/* Called with: Example 766 * $0 = device name /dev/rwd0a 767 * $1 = file system type ffs 768 * $2 = error return code form fsck 8 769 */ 770message badfs 771{It appears that $0 is not a $1 file system or the fsck was 772not successful. Try mounting it anyway? (Error number $2.) 773} 774 775message rootmissing 776{ target root is missing %s. 777} 778 779message badroot 780{The completed new root file system failed a basic sanity check. 781Are you sure you installed all the required sets? 782} 783 784message fd_type 785{Floppy file system type} 786 787message fdnotfound 788{Could not find the file on the floppy. 789} 790 791message fdremount 792{The floppy was not mounted successfully. 793} 794 795message fdmount 796{Please load the floppy containing the file named "%s.%s". 797 798If the set has no more disks, select "Set finished" to install the set. 799Select "Abort fetch" to return to the install media selection menu. 800} 801 802message mntnetconfig 803{Is the network information you entered accurate for this machine 804in regular operation and do you want it installed in /etc? } 805 806message cur_distsets 807{The following is the list of distribution sets that will be used. 808 809} 810 811message cur_distsets_header 812{ Distribution set Selected 813 ------------------------ -------- 814} 815 816message set_base 817{Base} 818 819message set_system 820{Configuration files (/etc)} 821 822message set_compiler 823{Compiler tools} 824 825message set_dtb 826{Devicetree hardware descriptions} 827 828message set_games 829{Games} 830 831message set_gpufw 832{Graphics driver firmware} 833 834message set_man_pages 835{Manual pages} 836 837message set_misc 838{Miscellaneous} 839 840message set_modules 841{Kernel modules} 842 843message set_rescue 844{Recovery tools} 845 846message set_tests 847{Test programs} 848 849message set_text_tools 850{Text processing tools} 851 852message set_X11 853{X11 sets} 854 855message set_X11_base 856{X11 base and clients} 857 858message set_X11_etc 859{X11 configuration} 860 861message set_X11_fonts 862{X11 fonts} 863 864message set_X11_servers 865{X11 servers} 866 867message set_X11_prog 868{X11 programming} 869 870message set_source 871{Source and debug sets} 872 873message set_syssrc 874{Kernel sources} 875 876message set_src 877{Base sources} 878 879message set_sharesrc 880{Share sources} 881 882message set_gnusrc 883{GNU sources} 884 885message set_xsrc 886{X11 sources} 887 888message set_debug 889{Debug symbols} 890 891message set_xdebug 892{X11 debug symbols} 893 894message select_all 895{Select all the above sets} 896 897message select_none 898{Deselect all the above sets} 899 900message install_selected_sets 901{Install selected sets} 902 903message tarerror 904{There was an error in extracting the file %s. That means 905some files were not extracted correctly and your system will not be 906complete. 907 908Continue extracting sets?} 909 910/* Called with: Example 911 * $0 = partitioning name Master Boot Record (MBR) 912 * $1 = short version of $0 MBR 913 */ 914message must_be_one_root 915{There must be a single partition marked to be mounted on '/'.} 916 917/* Called with: Example 918 * $0 = first partition description 70 - 90 MB, MSDOS 919 * $1 = second partition description 80 - 1500 MB, 4.2BSD 920 */ 921message partitions_overlap 922{partitions $0 and $1 overlap.} 923 924message No_Bootcode 925{No bootcode for specified FS type of root partition} 926 927message cannot_ufs2_root 928{Sorry, the root file system can't be FFSv2 due to lack of bootloader support 929on this port.} 930 931message edit_partitions_again 932{ 933 934You can either edit the partition table by hand, or give up and return 935to the main menu. 936 937Edit the partition table again?} 938 939/* Called with: Example 940 * $0 = missing file /some/path 941 */ 942message config_open_error 943{Could not open config file $0} 944 945message choose_timezone 946{Please choose the timezone that fits you best from the list below. 947Press RETURN to select an entry. 948Press 'x' followed by RETURN to quit the timezone selection. 949 950 Default: %s 951 Selected: %s 952 Local time: %s %s 953} 954 955message tz_back 956{ Back to main timezone list} 957 958message swapactive 959{The disk that you selected has a swap partition that may currently be 960in use if your system is low on memory. Because you are going to 961repartition this disk, this swap partition will be disabled now. Please 962beware that this might lead to out of swap errors. Should you get such 963an error, please restart the system and try again.} 964 965message swapdelfailed 966{Sysinst failed to deactivate the swap partition on the disk that you 967chose for installation. Please reboot and try again.} 968 969message rootpw 970{The root password of the newly installed system has not yet been initialized, 971and is thus empty. Do you want to set a root password for the system now?} 972 973message force_rootpw 974{The root password of the newly installed system has not yet been 975initialized. 976 977If you do not want to set a password, enter an empty line.} 978 979message rootsh 980{You can now select which shell to use for the root user. The default is 981/bin/sh, but you may prefer another one.} 982 983message no_root_fs 984{ 985There is no defined root file system. You need to define at least 986one mount point with "/". 987 988Press <return> to continue. 989} 990 991message slattach { 992Enter slattach flags 993} 994 995message Pick_an_option {Pick an option to turn on or off.} 996message Scripting {Scripting} 997message Logging {Logging} 998 999message Status { Status: } 1000message Command {Command: } 1001message Running {Running} 1002message Finished {Finished} 1003message Command_failed {Command failed} 1004message Command_ended_on_signal {Command ended on signal} 1005 1006message NetBSD_VERSION_Install_System {NetBSD-@@VERSION@@ Install System} 1007message Exit_Install_System {Exit Install System} 1008message Install_NetBSD_to_hard_disk {Install NetBSD to hard disk} 1009message Upgrade_NetBSD_on_a_hard_disk {Upgrade NetBSD on a hard disk} 1010message Re_install_sets_or_install_additional_sets {Re-install sets or install additional sets} 1011message Reboot_the_computer {Reboot the computer} 1012message Utility_menu {Utility menu} 1013message Config_menu {Config menu} 1014message exit_utility_menu {Back to main menu} 1015message exit_menu_generic {Exit} 1016message NetBSD_VERSION_Utilities {NetBSD-@@VERSION@@ Utilities} 1017message Run_bin_sh {Run /bin/sh} 1018message Set_timezone {Set timezone} 1019message Configure_network {Configure network} 1020message Partition_a_disk {Partition a disk} 1021message Logging_functions {Logging functions} 1022message Halt_the_system {Halt the system} 1023message yes_or_no {Yes or no?} 1024message Hit_enter_to_continue {Hit enter to continue} 1025message Choose_your_installation {Choose your installation} 1026 1027/* Called with: Example 1028 * $0 = partitioning name Master Boot Record (MBR) 1029 * $1 = short version of $0 MBR 1030 */ 1031message Keep_existing_partitions 1032{Use existing $1 partitions} 1033 1034/* Called with: Example 1035 * $0 = partitioning name Master Boot Record (MBR) 1036 * $1 = short version of $0 MBR 1037 */ 1038message Set_Sizes {Set sizes of NetBSD partitions} 1039 1040/* Called with: Example 1041 * $0 = partitioning name Master Boot Record (MBR) 1042 * $1 = short version of $0 MBR 1043 */ 1044message Use_Default_Parts {Use default partition sizes} 1045 1046/* Called with: Example 1047 * $0 = current partitioning name Master Boot Record (MBR) 1048 * $1 = short version of $0 MBR 1049 */ 1050message Use_Different_Part_Scheme 1051{Delete everything, use different partitions (not $1)} 1052 1053message Gigabytes {Gigabytes} 1054message Megabytes {Megabytes} 1055message Bytes {Bytes} 1056message Cylinders {Cylinders} 1057message Sectors {Sectors} 1058message Select_medium {Install from} 1059message ftp {FTP} 1060message http {HTTP} 1061message nfs {NFS} 1062.if HAVE_INSTALL_IMAGE 1063message cdrom {CD-ROM / DVD / install image media} 1064.else 1065message cdrom {CD-ROM / DVD} 1066.endif 1067message floppy {Floppy} 1068message local_fs {Unmounted fs} 1069message local_dir {Local directory} 1070message Select_your_distribution {Select your distribution} 1071message Full_installation {Full installation} 1072message Full_installation_nox {Installation without X11} 1073message Minimal_installation {Minimal installation} 1074message Custom_installation {Custom installation} 1075message hidden {** hidden **} 1076message Host {Host} 1077message Base_dir {Base directory} 1078message Set_dir_bin {Binary set directory} 1079message Set_dir_src {Source set directory} 1080message Dist_postfix {File extension} 1081message Xfer_dir {Transfer directory} 1082message transfer_method {Download via} 1083message User {User} 1084message Password {Password} 1085message Proxy {Proxy} 1086message Get_Distribution {Get Distribution} 1087message Continue {Continue} 1088message Prompt_Continue {Continue?} 1089message What_do_you_want_to_do {What do you want to do?} 1090message Try_again {Try again} 1091message Set_finished {Set finished} 1092message Skip_set {Skip set} 1093message Skip_group {Skip set group} 1094message Abandon {Abandon installation} 1095message Abort_fetch {Abort fetch} 1096message Device {Device} 1097message File_system {File system} 1098message Select_DNS_server { Select DNS server} 1099message other {other } 1100message Perform_autoconfiguration {Perform autoconfiguration?} 1101message Root_shell {Root shell} 1102message User_shell {User shell} 1103message Color_scheme {Color scheme} 1104message White_on_black {White on black} 1105message Black_on_white {Black on white} 1106message White_on_blue {White on blue} 1107message Green_on_black {Green on black} 1108 1109.if AOUT2ELF 1110message aoutfail 1111{The directory where the old a.out shared libraries should be moved to could 1112not be created. Please try the upgrade procedure again and make sure you 1113have mounted all file systems.} 1114 1115message emulbackup 1116{Either the /emul/aout or /emul directory on your system was a symbolic link 1117pointing to an unmounted file system. It has been given a '.old' extension. 1118Once you bring your upgraded system back up, you may need to take care 1119of merging the newly created /emul/aout directory with the old one. 1120} 1121.endif 1122 1123message oldsendmail 1124{Sendmail is no longer in this release of NetBSD, default MTA is 1125postfix. The file /etc/mailer.conf still chooses the removed 1126sendmail. Do you want to upgrade /etc/mailer.conf automatically for 1127postfix? If you choose "No" you will have to update /etc/mailer.conf 1128yourself to ensure proper email delivery.} 1129 1130message license 1131{To use the network interface %s, you must agree to the license in 1132file %s. To view this file now, you can type ^Z, look at the contents of 1133the file and then type "fg" to resume.} 1134 1135message binpkg 1136{To configure the binary package system, please choose the network location 1137to fetch packages from. Once your system comes up, you can use 'pkgin' 1138to install additional packages, or remove packages.} 1139 1140message pkgpath 1141{Enabling binary packages with pkgin requires setting up the repository. 1142The following are the host, directory, user, and password that 1143will be used. If "user" is "ftp", then the password is not needed. 1144 1145} 1146message rcconf_backup_failed {Making backup of rc.conf failed. Continue?} 1147message rcconf_backup_succeeded {rc.conf backup saved to %s.} 1148message rcconf_restore_failed {Restoring backup rc.conf failed.} 1149message rcconf_delete_failed {Deleting old %s entry failed.} 1150message Pkg_dir {Package directory} 1151message configure_prior {configure a prior installation of} 1152message configure {configure} 1153message change {change} 1154message password_set {password set} 1155message YES {YES} 1156message NO {NO} 1157message DONE {DONE} 1158message abandoned {Abandoned} 1159message empty {***EMPTY***} 1160message timezone {Timezone} 1161message change_rootpw {Change root password} 1162message enable_binpkg {Enable installation of binary packages} 1163message enable_sshd {Enable sshd} 1164message enable_ntpd {Enable ntpd} 1165message run_ntpdate {Run ntpdate at boot} 1166message enable_mdnsd {Enable multicast DNS support} 1167message enable_xdm {Enable xdm} 1168message enable_cgd {Enable cgd} 1169message enable_lvm {Enable lvm} 1170message enable_raid {Enable raidframe} 1171message add_a_user {Add a user} 1172message configmenu {Configure the additional items as needed.} 1173message doneconfig {Finished configuring} 1174message Install_pkgin {Install pkgin and update package summary} 1175message binpkg_installed 1176{Your system is now configured to use pkgin to install binary packages. To 1177install a package, run: 1178 1179pkgin install <packagename> 1180 1181from a root shell. Read the pkgin(1) manual page for further information.} 1182message Install_pkgsrc {Fetch and unpack pkgsrc} 1183message pkgsrc 1184{Installing pkgsrc requires unpacking an archive retrieved over the network. 1185The following are the host, directory, user, and password that 1186will be used. If "user" is "ftp", then the password is not needed. 1187 1188} 1189message Pkgsrc_dir {pkgsrc directory} 1190message get_pkgsrc {Fetch and unpack pkgsrc} 1191message retry_pkgsrc_network {Network configuration failed. Retry?} 1192message quit_pkgsrc {Quit without installing pkgsrc} 1193message quit_pkgs_install {Quit installing binary pkgs} 1194message pkgin_failed 1195{Installation of pkgin failed, possibly because no binary packages 1196exist. Please check the package path and try again.} 1197message failed {Failed} 1198 1199message askfsmountadv {Mountpoint (or 'raid', 'cgd', 'lvm')?} 1200message partman {Extended partitioning} 1201message editpart {Edit partitions} 1202message selectwedge {Preconfigured "wedges" dk(4)} 1203 1204message fremove {REMOVE} 1205message remove {Remove} 1206message add {Add} 1207message auto {auto} 1208 1209message removepartswarn {This removes all partitions on the disk!} 1210message saveprompt {Save changes before finishing?} 1211message cantsave {Changes cannot be saved.} 1212message noroot {No root partition defined. Cannot continue\n} 1213 1214message addusername {8 character username to add} 1215message addusertowheel {Do you wish to add this user to group wheel?} 1216 1217message Delete_partition 1218{Delete partition} 1219 1220message No_filesystem_newfs 1221{The selected partition does not seem to have a valid file system. 1222Do you want to newfs (format) it?} 1223 1224message swap_display {swap} 1225 1226/* Called with: Example 1227 * $0 = parent device name sd0 1228 * $1 = swap partition name my_swap 1229 */ 1230message Auto_add_swap_part 1231{A swap partition (named $1) 1232seems to exist on $0. 1233Do you want to use that?} 1234 1235message parttype_disklabel {BSD disklabel} 1236message parttype_disklabel_short {disklabel} 1237/* 1238 * This is used on architectures with MBR above disklabel when there is 1239 * no MBR on a disk. 1240 */ 1241message parttype_only_disklabel {disklabel (NetBSD only)} 1242 1243message select_part_scheme 1244{The disk seems not to have been partitioned before. Please select 1245a partitioning scheme from the available options below. } 1246 1247message select_other_partscheme 1248{Please select a different partitioning scheme from the available 1249options below. } 1250 1251message select_part_limit 1252{Some schemes have size limits and can only be used for the start 1253of huge disks. The limit is displayed below.} 1254 1255/* Called with: Example 1256 * $0 = device name ld0 1257 * $1 = size 3 TB 1258 */ 1259message part_limit_disksize 1260{This device ($0) is $1 big.} 1261 1262message size_limit {Max:} 1263 1264message addpart {Add a partition} 1265message nopart { (no partition defined)} 1266message custom_type {Unknown} 1267 1268message dl_type_invalid {Invalid file system type code (0 .. 255)} 1269 1270message cancel {Cancel} 1271 1272message out_of_range {Invalid value} 1273message invalid_guid {Invalid GUID} 1274 1275message reedit_partitions {Re-edit} 1276message abort_installation {Abort installation} 1277 1278message dl_get_custom_fstype {File system type code (upto 255)} 1279 1280message err_too_many_partitions {Too many partitions} 1281 1282/* Called with: Example 1283 * $0 = mount point /home 1284 */ 1285message mp_already_exists {$0 already defined!} 1286 1287message ptnsize_replace_existing 1288{This is an already existing partition. 1289To change its size, the partition will need to be deleted and later 1290recreated. All data in this partition will be lost. 1291 1292Would you like to delete this partition and continue?} 1293 1294message part_not_deletable {Non-deletable system partition} 1295 1296message ptn_type {type} 1297message ptn_start {start} 1298message ptn_size {size} 1299message ptn_end {end} 1300 1301message ptn_bsize {block size} 1302message ptn_fsize {fragment size} 1303message ptn_isize {avg file size} 1304 1305/* Called with: Example 1306 * $0 = avg file size in byte 1200 1307 */ 1308message ptn_isize_bytes {$0 bytes (for number of inodes)} 1309message ptn_isize_dflt {4 fragments} 1310 1311message Select_file_system_block_size 1312{Select file system block size} 1313 1314message Select_file_system_fragment_size 1315{Select file system fragment size} 1316 1317message ptn_isize_prompt 1318{average file size (bytes)} 1319 1320message No_free_space {No free space} 1321message Invalid_numeric {Invalid numeric!} 1322message Too_large {Too large!} 1323 1324/* Called with: Example 1325 * $0 = start of free space 500 1326 * $1 = end of free space 599 1327 * $2 = size of free space 100 1328 * $3 = unit in use MB 1329 */ 1330message free_space_line {Space at $0..$1 $3 (size $2 $3)\n} 1331 1332message fs_type_ffsv2 {FFSv2} 1333message fs_type_ffs {FFS} 1334message fs_type_efi_sp {EFI system partition} 1335message fs_type_ext2old {Linux Ext2 (old)} 1336message other_fs_type {Other type} 1337 1338message editpack {Edit name of the disk} 1339message edit_disk_pack_hdr 1340{The name of the disk is arbitrary. 1341It is useful for distinguishing between multiple disks. 1342It may also be used when auto-creating dk(4) "wedges" for this disk. 1343 1344Enter disk name} 1345 1346 1347/* Called with: Example 1348 * $0 = outer partitioning name Master Boot Record (MBR) 1349 * $1 = short version of $0 MBR 1350 */ 1351message reeditpart 1352{Do you want to re-edit the $1 partitions?} 1353 1354 1355/* Called with: Example 1356 * $0 = device name wd0 1357 * $1 = outer partitioning name Master Boot Record (MBR) 1358 * $2 = inner partitioning name BSD disklabel 1359 * $3 = short version of $1 MBR 1360 * $4 = short version of $2 disklabel 1361 * $5 = size needed for NetBSD 250M 1362 * $6 = size needed to build NetBSD 15G 1363 */ 1364message fullpart 1365{We are now going to install NetBSD on the disk $0. 1366 1367NetBSD requires a single partition in the disk's $1 1368partition table, this is split further by the $2. 1369NetBSD can also access file systems in other $3 partitions. 1370 1371If you select 'Use the entire disk' then the previous contents of the 1372disk will be overwritten and a single $3 partition used to cover the 1373entire disk. 1374If you want to install more than one operating system then edit the 1375$3 partition table and create a partition for NetBSD. 1376 1377About $5 is enough for a basic installation, but you should allow 1378extra for additional software and user files. 1379Allow at least $6 if you want to build NetBSD itself.} 1380 1381message Select_your_choice 1382{What would you like to do?} 1383 1384/* Called with: Example 1385 * $0 = partitioning name Master Boot Record (MBR) 1386 * $1 = short version of $0 MBR 1387 */ 1388message Use_only_part_of_the_disk 1389{Edit the $1 partition table} 1390 1391/* Called with: Example 1392 * $0 = partitioning name Master Boot Record (MBR) 1393 * $1 = short version of $0 MBR 1394 */ 1395message Use_the_entire_disk 1396{Use the entire disk} 1397 1398/* Called with: Example 1399 * $0 = device name wd0 1400 * $1 = total disk size 3000 GB 1401 * $2 = unallocated space 1.2 GB 1402 */ 1403message part_header 1404{ Total size of $0 is $1, available: $2} 1405message part_header_col_start {Start} 1406message part_header_col_size {Size} 1407message part_header_col_flag {Flag} 1408 1409message Partition_table_ok 1410{Partition table OK} 1411 1412message Dont_change 1413{Don't change} 1414message Other_kind 1415{Other} 1416 1417/* Called with: Example 1418 * $0 = outer partitioning name Master Boot Record (MBR) 1419 * $1 = short version of $0 MBR 1420 */ 1421message nobsdpart 1422{There is no NetBSD partition in the $1.} 1423 1424/* Called with: Example 1425 * $0 = outer partitioning name Master Boot Record (MBR) 1426 * $1 = short version of $0 MBR 1427 */ 1428message multbsdpart 1429{There are multiple NetBSD partitions in the $1. 1430You should set the 'install' flag on the one you want to use.} 1431 1432message ovrwrite 1433{Your disk currently has a non-NetBSD partition. Do you really want to 1434overwrite that partition with NetBSD? 1435} 1436 1437message Partition_OK 1438{Partition OK} 1439 1440/* Called with: Example 1441 * $0 = device name wd0 1442 * $1 = outer partitioning name Master Boot Record (MBR) 1443 * $2 = short version of $1 MBR 1444 * $3 = other flag options d = bootselect default, a = active 1445 */ 1446message editparttable 1447{The Current $2 partition table of $0 is shown below. 1448Flags: (I)nstall here$3. 1449Select the partition you wish to change: 1450 1451} 1452 1453message install_flag {I} 1454message newfs_flag {N} 1455 1456message clone_flag {C} 1457message clone_flag_desc {, (C)lone} 1458 1459message ptn_install {install} 1460message ptn_instflag_desc {(I)nstall, } 1461 1462message parttype_gpt {Guid Partition Table (GPT)} 1463message parttype_gpt_short {GPT} 1464 1465message ptn_label {Label} 1466message ptn_uuid {UUID} 1467message ptn_gpt_type {GPT Type} 1468message ptn_boot {Boot} 1469 1470/* Called with: Example 1471 * $0 = outer partitioning name Master Boot Record (MBR) 1472 * $1 = short version of $0 MBR 1473 */ 1474message use_partitions_anyway 1475{Use this partitions anyway} 1476 1477message gpt_flags {B} 1478message gpt_flag_desc {, (B)ootable} 1479 1480/* Called with: Example 1481 * $0 = file system type FFSv2 1482 */ 1483message size_ptn_not_mounted {(Other: $0)} 1484 1485message running_system {current system} 1486 1487message clone_from_elsewhere {Clone external partition(s)} 1488message select_foreign_part 1489{Please select an external source partition:} 1490message select_source_hdr 1491{Your currently selected source partitions are:} 1492message clone_with_data {Clone with data} 1493message select_source_add {Add another partition} 1494message clone_target_end {Add at end} 1495message clone_target_hdr 1496{Insert cloned partitions before:} 1497message clone_target_disp {cloned partition(s)} 1498message clone_src_done 1499{Source selection OK, proceed to target selection} 1500 1501message network_ok 1502{Your network seems to work fine. 1503Should we skip the configuration 1504and just use the network as-is?} 1505