xref: /netbsd-src/usr.sbin/sysinst/arch/hppa/md.c (revision 946379e7b37692fc43f68eb0d1c10daa0a7f3b6c)
1 /*	$NetBSD: md.c,v 1.2 2014/08/03 16:09:39 martin Exp $	*/
2 
3 /*
4  * Copyright 1997 Piermont Information Systems Inc.
5  * All rights reserved.
6  *
7  * Based on code written by Philip A. Nelson for Piermont Information
8  * Systems Inc.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. The name of Piermont Information Systems Inc. may not be used to endorse
19  *    or promote products derived from this software without specific prior
20  *    written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY PIERMONT INFORMATION SYSTEMS INC. ``AS IS''
23  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED. IN NO EVENT SHALL PIERMONT INFORMATION SYSTEMS INC. BE
26  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32  * THE POSSIBILITY OF SUCH DAMAGE.
33  */
34 
35 /* md.c -- hppa machine specific routines */
36 /* This file is in close sync with pmax, vax, and x68k, sparc md.c */
37 
38 #include <sys/types.h>
39 #include <sys/disklabel.h>
40 #include <sys/ioctl.h>
41 #include <sys/param.h>
42 #include <stdio.h>
43 #include <curses.h>
44 #include <unistd.h>
45 #include <fcntl.h>
46 #include <util.h>
47 
48 #include "defs.h"
49 #include "md.h"
50 #include "msg_defs.h"
51 #include "menu_defs.h"
52 
53 #define HP700_PDC_LIMIT	((unsigned)2*1024*1024*1024)
54 
55 void
56 md_init(void)
57 {
58 }
59 
60 void
61 md_init_set_status(int flags)
62 {
63 	(void)flags;
64 }
65 
66 int
67 md_get_info(void)
68 {
69 	struct disklabel disklabel;
70 	int fd;
71 	char dev_name[100];
72 
73 	snprintf(dev_name, 100, "/dev/r%sc", pm->diskdev);
74 
75 	fd = open(dev_name, O_RDONLY, 0);
76 	if (fd < 0) {
77 		if (logfp)
78 			(void)fprintf(logfp, "Can't open %s\n", dev_name);
79 		endwin();
80 		fprintf(stderr, "Can't open %s\n", dev_name);
81 		exit(1);
82 	}
83 	if (ioctl(fd, DIOCGDINFO, &disklabel) == -1) {
84 		if (logfp)
85 			(void)fprintf(logfp, "Can't read disklabel on %s.\n",
86 				dev_name);
87 		endwin();
88 		fprintf(stderr, "Can't read disklabel on %s.\n", dev_name);
89 		close(fd);
90 		exit(1);
91 	}
92 	close(fd);
93 
94 	pm->dlcyl = disklabel.d_ncylinders;
95 	pm->dlhead = disklabel.d_ntracks;
96 	pm->dlsec = disklabel.d_nsectors;
97 	pm->sectorsize = disklabel.d_secsize;
98 	pm->dlcylsize = disklabel.d_secpercyl;
99 
100 	/*
101 	 * Compute whole disk size. Take max of (pm->dlcyl*pm->dlhead*pm->dlsec)
102 	 * and secperunit,  just in case the disk is already labelled.
103 	 * (If our new label's RAW_PART size ends up smaller than the
104 	 * in-core RAW_PART size  value, updating the label will fail.)
105 	 */
106 	pm->dlsize = pm->dlcyl*pm->dlhead*pm->dlsec;
107 	if (disklabel.d_secperunit > pm->dlsize)
108 		pm->dlsize = disklabel.d_secperunit;
109 
110 	/*
111 	 * hp700 PDC can only address up to 2GB.
112 	 */
113 	root_limit = HP700_PDC_LIMIT / (unsigned)pm->sectorsize;
114 
115 	return 1;
116 }
117 
118 /*
119  * md back-end code for menu-driven BSD disklabel editor.
120  */
121 int
122 md_make_bsd_partitions(void)
123 {
124 	return make_bsd_partitions();
125 }
126 
127 /*
128  * any additional partition validation
129  */
130 int
131 md_check_partitions(void)
132 {
133 	/* Check the root partition is sane. */
134 	uint32_t limit = HP700_PDC_LIMIT / (unsigned)pm->sectorsize;
135 	int part;
136 
137 	for (part = PART_A; part < MAXPARTITIONS; part++) {
138 		if (strcmp(pm->bsdlabel[part].pi_mount, "/") == 0) {
139 			uint32_t offset = pm->bsdlabel[part].pi_offset;
140 			uint32_t size = pm->bsdlabel[part].pi_size;
141 
142 			if (offset > limit || offset + size > limit) {
143 				msg_display(MSG_md_pdclimit);
144 				process_menu(MENU_ok, NULL);
145 				return 0;
146 			}
147 		}
148 	}
149 
150 	return 1;
151 }
152 
153 /*
154  * hook called before writing new disklabel.
155  */
156 int
157 md_pre_disklabel(void)
158 {
159 	return 0;
160 }
161 
162 /*
163  * hook called after writing disklabel to new target disk.
164  */
165 int
166 md_post_disklabel(void)
167 {
168 	return 0;
169 }
170 
171 /*
172  * hook called after upgrade() or install() has finished setting
173  * up the target disk but immediately before the user is given the
174  * ``disks are now set up'' message.
175  */
176 int
177 md_post_newfs(void)
178 {
179 	int error;
180 
181 	error = cp_to_target("/usr/mdec/boot", "/boot");
182 	if (error)
183 		return error;
184 
185 	/* boot blocks ... */
186 	msg_display(MSG_dobootblks, pm->diskdev);
187 	if (run_program(RUN_DISPLAY | RUN_NO_CLEAR,
188 	    "/usr/sbin/installboot -v /dev/r%sc /usr/mdec/xxboot",
189 	    pm->diskdev))
190 		process_menu(MENU_ok,
191 			 deconst("Warning: disk is probably not bootable"));
192 	return 0;
193 }
194 
195 int
196 md_post_extract(void)
197 {
198 	return 0;
199 }
200 
201 void
202 md_cleanup_install(void)
203 {
204 #ifndef DEBUG
205 	enable_rc_conf();
206 #endif
207 }
208 
209 int
210 md_pre_update(void)
211 {
212 	return 1;
213 }
214 
215 /* Upgrade support */
216 int
217 md_update(void)
218 {
219 	md_post_newfs();
220 	return 1;
221 }
222 
223 int
224 md_pre_mount()
225 {
226 	return 0;
227 }
228