1# $NetBSD: t_pppoe_unnumbered.sh,v 1.1 2022/11/25 08:43:16 knakahara Exp $ 2# 3# Copyright (c) 2022 Internet Initiative Japan Inc. 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions 8# are met: 9# 1. Redistributions of source code must retain the above copyright 10# notice, this list of conditions and the following disclaimer. 11# 2. Redistributions in binary form must reproduce the above copyright 12# notice, this list of conditions and the following disclaimer in the 13# documentation and/or other materials provided with the distribution. 14# 15# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 16# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 17# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 18# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 19# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 20# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 21# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 22# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 24# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 25# POSSIBILITY OF SUCH DAMAGE. 26# 27 28SERVER=unix://pppoe_server 29CLIENT=unix://pppoe_client 30 31SERVER_IP=10.0.0.1 32CLIENT_IP=10.1.1.1 33AUTHNAME=foobar@baz.com 34SECRET=oink 35BUS_G=bus_global 36BUS_CLIENT_L=bus_client_local 37TIMEOUT=3 38WAITTIME=10 39DEBUG=${DEBUG:-false} 40 41atf_ifconfig() 42{ 43 44 atf_check -s exit:0 rump.ifconfig $* 45} 46 47atf_pppoectl() 48{ 49 50 atf_check -s exit:0 -x "$HIJACKING pppoectl $*" 51} 52 53setup_ifaces() 54{ 55 56 rump_server_add_iface $SERVER shmif0 $BUS_G 57 rump_server_add_iface $CLIENT shmif0 $BUS_G 58 rump_server_add_iface $CLIENT shmif1 $BUS_CLIENT_L 59 rump_server_add_iface $SERVER pppoe0 60 rump_server_add_iface $CLIENT pppoe0 61 62 export RUMP_SERVER=$SERVER 63 64 atf_ifconfig shmif0 up 65 $inet && atf_ifconfig pppoe0 \ 66 inet $SERVER_IP $CLIENT_IP down 67 atf_ifconfig pppoe0 link0 68 69 $DEBUG && rump.ifconfig pppoe0 debug 70 $DEBUG && rump.ifconfig 71 $DEBUG && $HIJACKING pppoectl -d pppoe0 72 unset RUMP_SERVER 73 74 export RUMP_SERVER=$CLIENT 75 atf_ifconfig shmif0 up 76 77 $inet && atf_ifconfig pppoe0 \ 78 inet $CLIENT_IP/32 0.0.0.1 down 79 80 $DEBUG && rump.ifconfig pppoe0 debug 81 $DEBUG && rump.ifconfig 82 $DEBUG && $HIJACKING pppoectl -d pppoe0 83 84 atf_ifconfig shmif1 inet $CLIENT_IP/29 85 unset RUMP_SERVER 86} 87 88setup() 89{ 90 inet=true 91 92 if [ $# -ne 0 ]; then 93 eval $@ 94 fi 95 96 rump_server_start $SERVER pppoe 97 rump_server_start $CLIENT pppoe 98 99 setup_ifaces 100 101 export RUMP_SERVER=$SERVER 102 atf_pppoectl -e shmif0 pppoe0 103 unset RUMP_SERVER 104 105 export RUMP_SERVER=$CLIENT 106 atf_pppoectl -e shmif0 pppoe0 107 unset RUMP_SERVER 108} 109 110wait_for_opened() 111{ 112 local cp=$1 113 local dontfail=$2 114 local n=$WAITTIME 115 116 for i in $(seq $n); do 117 $HIJACKING pppoectl -dd pppoe0 | grep -q "$cp state: opened" 118 if [ $? = 0 ]; then 119 rump.ifconfig -w 10 120 return 121 fi 122 sleep 1 123 done 124 125 if [ "$dontfail" != "dontfail" ]; then 126 atf_fail "Couldn't connect to the server for $n seconds." 127 fi 128} 129 130wait_for_disconnected() 131{ 132 local dontfail=$1 133 local n=$WAITTIME 134 135 for i in $(seq $n); do 136 # If PPPoE client is disconnected by PPPoE server, then 137 # the LCP state will of the client is in a starting to send PADI. 138 $HIJACKING pppoectl -dd pppoe0 | grep -q \ 139 -e "LCP state: initial" -e "LCP state: starting" 140 [ $? = 0 ] && return 141 142 sleep 1 143 done 144 145 if [ "$dontfail" != "dontfail" ]; then 146 atf_fail "Couldn't disconnect for $n seconds." 147 fi 148} 149 150run_test_unnumbered() 151{ 152 local auth="chap" 153 local cp="IPCP" 154 setup 155 156 # As pppoe client doesn't support rechallenge yet. 157 local server_optparam="" 158 if [ $auth = "chap" ]; then 159 server_optparam="norechallenge" 160 fi 161 162 export RUMP_SERVER=$SERVER 163 atf_pppoectl pppoe0 "hisauthproto=$auth" \ 164 "hisauthname=$AUTHNAME" "hisauthsecret=$SECRET" \ 165 "myauthproto=none" $server_optparam 166 atf_ifconfig pppoe0 up 167 unset RUMP_SERVER 168 169 export RUMP_SERVER=$CLIENT 170 atf_pppoectl pppoe0 \ 171 "myauthname=$AUTHNAME" "myauthsecret=$SECRET" \ 172 "myauthproto=$auth" "hisauthproto=none" 173 atf_ifconfig pppoe0 unnumbered 174 atf_ifconfig pppoe0 up 175 $DEBUG && rump.ifconfig 176 $DEBUG && rump.route -nL show 177 wait_for_opened $cp 178 atf_check -s exit:0 -o ignore \ 179 rump.route add -inet default -ifp pppoe0 $CLIENT_IP 180 atf_check -s exit:0 -o ignore \ 181 rump.ping -c 1 -w $TIMEOUT -I $CLIENT_IP $SERVER_IP 182 unset RUMP_SERVER 183 184 # test for disconnection from client just in case 185 export RUMP_SERVER=$CLIENT 186 atf_ifconfig pppoe0 down 187 wait_for_disconnected 188 export RUMP_SERVER=$SERVER 189 wait_for_disconnected 190 $DEBUG && $HIJACKING pppoectl -d pppoe0 191 atf_check -s not-exit:0 -o ignore -e ignore \ 192 rump.ping -c 1 -w $TIMEOUT $CLIENT_IP 193 atf_check -s exit:0 -o match:'initial' -x "$HIJACKING pppoectl -d pppoe0" 194 unset RUMP_SERVER 195} 196 197atf_test_case pppoe_unnumbered cleanup 198 199pppoe_unnumbered_head() 200{ 201 202 atf_set "descr" "Does pppoe unnumbered tests" 203 atf_set "require.progs" "rump_server pppoectl" 204} 205 206pppoe_unnumbered_body() 207{ 208 209 run_test_unnumbered 210} 211 212pppoe_unnumbered_cleanup() 213{ 214 215 $DEBUG && dump 216 cleanup 217} 218 219atf_init_test_cases() 220{ 221 222 atf_add_test_case pppoe_unnumbered 223} 224