1 /* $NetBSD: in6_pcb.h,v 1.17 2001/07/02 15:25:36 itojun Exp $ */ 2 /* $KAME: in6_pcb.h,v 1.45 2001/02/09 05:59:46 itojun Exp $ */ 3 4 /* 5 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. Neither the name of the project nor the names of its contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE 24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 */ 32 33 /* 34 * Copyright (c) 1982, 1986, 1990, 1993 35 * The Regents of the University of California. All rights reserved. 36 * 37 * Redistribution and use in source and binary forms, with or without 38 * modification, are permitted provided that the following conditions 39 * are met: 40 * 1. Redistributions of source code must retain the above copyright 41 * notice, this list of conditions and the following disclaimer. 42 * 2. Redistributions in binary form must reproduce the above copyright 43 * notice, this list of conditions and the following disclaimer in the 44 * documentation and/or other materials provided with the distribution. 45 * 3. All advertising materials mentioning features or use of this software 46 * must display the following acknowledgement: 47 * This product includes software developed by the University of 48 * California, Berkeley and its contributors. 49 * 4. Neither the name of the University nor the names of its contributors 50 * may be used to endorse or promote products derived from this software 51 * without specific prior written permission. 52 * 53 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 54 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 55 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 56 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 57 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 58 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 59 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 60 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 61 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 62 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 63 * SUCH DAMAGE. 64 * 65 * @(#)in_pcb.h 8.1 (Berkeley) 6/10/93 66 */ 67 68 #ifndef _NETINET6_IN6_PCB_H_ 69 #define _NETINET6_IN6_PCB_H_ 70 71 #include <sys/queue.h> 72 73 /* 74 * Common structure pcb for internet protocol implementation. 75 * Here are stored pointers to local and foreign host table 76 * entries, local and foreign socket numbers, and pointers 77 * up (to a socket structure) and down (to a protocol-specific) 78 * control block. 79 */ 80 struct icmp6_filter; 81 struct inpcbpolicy; 82 83 struct in6pcb { 84 struct in6pcb *in6p_next, *in6p_prev; 85 /* pointers to other pcb's */ 86 struct in6pcb *in6p_head; /* pointer back to chain of 87 in6pcb's for this protocol */ 88 struct in6_addr in6p_faddr; /* foreign host table entry */ 89 u_int16_t in6p_fport; /* foreign port */ 90 struct in6_addr in6p_laddr; /* local host table entry */ 91 u_int16_t in6p_lport; /* local port */ 92 u_int32_t in6p_flowinfo; /* priority and flowlabel */ 93 struct socket *in6p_socket; /* back pointer to socket */ 94 caddr_t in6p_ppcb; /* pointer to per-protocol pcb */ 95 struct route_in6 in6p_route; /* placeholder for routing entry */ 96 int in6p_flags; /* generic IP6/datagram flags */ 97 int in6p_hops; /* default hop limit */ 98 struct ip6_hdr in6p_ip6; /* header prototype */ 99 struct mbuf *in6p_options; /* IP6 options */ 100 struct ip6_pktopts *in6p_outputopts; /* IP6 options for outgoing packets */ 101 struct ip6_moptions *in6p_moptions; /* IP6 multicast options */ 102 u_short in6p_ifindex; 103 /* should move the following just after next/prev */ 104 LIST_ENTRY(in6pcb) in6p_hlist; /* hash chain */ 105 u_long in6p_hash; /* hash value */ 106 #if 1 /*IPSEC*/ 107 struct inpcbpolicy *in6p_sp; /* security policy. */ 108 #endif 109 struct icmp6_filter *in6p_icmp6filt; 110 int in6p_cksum; /* IPV6_CHECKSUM setsockopt */ 111 }; 112 113 #ifdef _KERNEL 114 #define in6p_ip6_nxt in6p_ip6.ip6_nxt /* for KAME src sync over BSD*'s */ 115 #endif 116 117 /* 118 * Flags in in6p_flags 119 * We define KAME's original flags in higher 16 bits as much as possible 120 * for compatibility with *bsd*s. 121 */ 122 #define IN6P_RECVOPTS 0x001000 /* receive incoming IP6 options */ 123 #define IN6P_RECVRETOPTS 0x002000 /* receive IP6 options for reply */ 124 #define IN6P_RECVDSTADDR 0x004000 /* receive IP6 dst address */ 125 #define IN6P_PKTINFO 0x010000 /* receive IP6 dst and I/F */ 126 #define IN6P_HOPLIMIT 0x020000 /* receive hoplimit */ 127 #define IN6P_HOPOPTS 0x040000 /* receive hop-by-hop options */ 128 #define IN6P_DSTOPTS 0x080000 /* receive dst options after rthdr */ 129 #define IN6P_RTHDR 0x100000 /* receive routing header */ 130 #define IN6P_RTHDRDSTOPTS 0x200000 /* receive dstoptions before rthdr */ 131 132 #define IN6P_HIGHPORT 0x1000000 /* user wants "high" port binding */ 133 #define IN6P_LOWPORT 0x2000000 /* user wants "low" port binding */ 134 #define IN6P_ANONPORT 0x4000000 /* port chosen for user */ 135 #define IN6P_FAITH 0x8000000 /* accept FAITH'ed connections */ 136 #define IN6P_BINDV6ONLY 0x10000000 /* do not grab IPv4 traffic */ 137 138 #define IN6P_CONTROLOPTS (IN6P_PKTINFO|IN6P_HOPLIMIT|IN6P_HOPOPTS|\ 139 IN6P_DSTOPTS|IN6P_RTHDR|IN6P_RTHDRDSTOPTS) 140 141 142 #define IN6PLOOKUP_WILDCARD 1 143 #define IN6PLOOKUP_SETLOCAL 2 144 145 /* compute hash value for foreign and local in6_addr and port */ 146 #define IN6_HASH(faddr, fport, laddr, lport) \ 147 (((faddr)->s6_addr32[0] ^ (faddr)->s6_addr32[1] ^ \ 148 (faddr)->s6_addr32[2] ^ (faddr)->s6_addr32[3] ^ \ 149 (laddr)->s6_addr32[0] ^ (laddr)->s6_addr32[1] ^ \ 150 (laddr)->s6_addr32[2] ^ (laddr)->s6_addr32[3]) \ 151 + (fport) + (lport)) 152 153 #define sotoin6pcb(so) ((struct in6pcb *)(so)->so_pcb) 154 155 #ifdef _KERNEL 156 void in6_losing __P((struct in6pcb *)); 157 int in6_pcballoc __P((struct socket *, struct in6pcb *)); 158 int in6_pcbbind __P((struct in6pcb *, struct mbuf *, struct proc *)); 159 int in6_pcbconnect __P((struct in6pcb *, struct mbuf *)); 160 void in6_pcbdetach __P((struct in6pcb *)); 161 void in6_pcbdisconnect __P((struct in6pcb *)); 162 struct in6pcb * 163 in6_pcblookup __P((struct in6pcb *, 164 struct in6_addr *, u_int, struct in6_addr *, 165 u_int, int)); 166 int in6_pcbnotify __P((struct in6pcb *, struct sockaddr *, 167 u_int, struct sockaddr *, u_int, int, void *, 168 void (*)(struct in6pcb *, int))); 169 void in6_pcbpurgeif0 __P((struct in6pcb *, struct ifnet *)); 170 void in6_pcbpurgeif __P((struct in6pcb *, struct ifnet *)); 171 void in6_rtchange __P((struct in6pcb *, int)); 172 void in6_setpeeraddr __P((struct in6pcb *, struct mbuf *)); 173 void in6_setsockaddr __P((struct in6pcb *, struct mbuf *)); 174 175 /* in in6_src.c */ 176 struct in6_addr *in6_selectsrc __P((struct sockaddr_in6 *, 177 struct ip6_pktopts *, 178 struct ip6_moptions *, 179 struct route_in6 *, 180 struct in6_addr *, int *)); 181 int in6_selecthlim __P((struct in6pcb *, struct ifnet *)); 182 int in6_pcbsetport __P((struct in6_addr *, struct in6pcb *)); 183 184 extern struct rtentry * 185 in6_pcbrtentry __P((struct in6pcb *)); 186 extern struct in6pcb *in6_pcblookup_connect __P((struct in6pcb *, 187 struct in6_addr *, u_int, struct in6_addr *, u_int, int)); 188 extern struct in6pcb *in6_pcblookup_bind __P((struct in6pcb *, 189 struct in6_addr *, u_int, int)); 190 #endif /* _KERNEL */ 191 192 #endif /* !_NETINET6_IN6_PCB_H_ */ 193