1 /* $NetBSD: ieee80211_output.c,v 1.44 2006/10/12 01:32:31 christos Exp $ */ 2 /*- 3 * Copyright (c) 2001 Atsushi Onoe 4 * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. The name of the author may not be used to endorse or promote products 16 * derived from this software without specific prior written permission. 17 * 18 * Alternatively, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") version 2 as published by the Free 20 * Software Foundation. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 23 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 24 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 25 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 27 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 31 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 */ 33 34 #include <sys/cdefs.h> 35 #ifdef __FreeBSD__ 36 __FBSDID("$FreeBSD: src/sys/net80211/ieee80211_output.c,v 1.34 2005/08/10 16:22:29 sam Exp $"); 37 #endif 38 #ifdef __NetBSD__ 39 __KERNEL_RCSID(0, "$NetBSD: ieee80211_output.c,v 1.44 2006/10/12 01:32:31 christos Exp $"); 40 #endif 41 42 #include "opt_inet.h" 43 44 #ifdef __NetBSD__ 45 #include "bpfilter.h" 46 #endif /* __NetBSD__ */ 47 48 #include <sys/param.h> 49 #include <sys/systm.h> 50 #include <sys/mbuf.h> 51 #include <sys/kernel.h> 52 #include <sys/endian.h> 53 #include <sys/errno.h> 54 #include <sys/proc.h> 55 #include <sys/sysctl.h> 56 57 #include <net/if.h> 58 #include <net/if_llc.h> 59 #include <net/if_media.h> 60 #include <net/if_arp.h> 61 #include <net/if_ether.h> 62 #include <net/if_llc.h> 63 #include <net/if_vlanvar.h> 64 65 #include <net80211/ieee80211_netbsd.h> 66 #include <net80211/ieee80211_var.h> 67 68 #if NBPFILTER > 0 69 #include <net/bpf.h> 70 #endif 71 72 #ifdef INET 73 #include <netinet/in.h> 74 #include <netinet/in_systm.h> 75 #include <netinet/in_var.h> 76 #include <netinet/ip.h> 77 #include <net/if_ether.h> 78 #endif 79 80 #ifdef IEEE80211_DEBUG 81 /* 82 * Decide if an outbound management frame should be 83 * printed when debugging is enabled. This filters some 84 * of the less interesting frames that come frequently 85 * (e.g. beacons). 86 */ 87 static __inline int 88 doprint(struct ieee80211com *ic, int subtype) 89 { 90 switch (subtype) { 91 case IEEE80211_FC0_SUBTYPE_PROBE_RESP: 92 return (ic->ic_opmode == IEEE80211_M_IBSS); 93 } 94 return 1; 95 } 96 #endif 97 98 /* 99 * Set the direction field and address fields of an outgoing 100 * non-QoS frame. Note this should be called early on in 101 * constructing a frame as it sets i_fc[1]; other bits can 102 * then be or'd in. 103 */ 104 static void 105 ieee80211_send_setup(struct ieee80211com *ic, 106 struct ieee80211_node *ni, 107 struct ieee80211_frame *wh, 108 int type, 109 const u_int8_t sa[IEEE80211_ADDR_LEN], 110 const u_int8_t da[IEEE80211_ADDR_LEN], 111 const u_int8_t bssid[IEEE80211_ADDR_LEN]) 112 { 113 #define WH4(wh) ((struct ieee80211_frame_addr4 *)wh) 114 115 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | type; 116 if ((type & IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_DATA) { 117 switch (ic->ic_opmode) { 118 case IEEE80211_M_STA: 119 wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; 120 IEEE80211_ADDR_COPY(wh->i_addr1, bssid); 121 IEEE80211_ADDR_COPY(wh->i_addr2, sa); 122 IEEE80211_ADDR_COPY(wh->i_addr3, da); 123 break; 124 case IEEE80211_M_IBSS: 125 case IEEE80211_M_AHDEMO: 126 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 127 IEEE80211_ADDR_COPY(wh->i_addr1, da); 128 IEEE80211_ADDR_COPY(wh->i_addr2, sa); 129 IEEE80211_ADDR_COPY(wh->i_addr3, bssid); 130 break; 131 case IEEE80211_M_HOSTAP: 132 wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; 133 IEEE80211_ADDR_COPY(wh->i_addr1, da); 134 IEEE80211_ADDR_COPY(wh->i_addr2, bssid); 135 IEEE80211_ADDR_COPY(wh->i_addr3, sa); 136 break; 137 case IEEE80211_M_MONITOR: /* NB: to quiet compiler */ 138 break; 139 } 140 } else { 141 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 142 IEEE80211_ADDR_COPY(wh->i_addr1, da); 143 IEEE80211_ADDR_COPY(wh->i_addr2, sa); 144 IEEE80211_ADDR_COPY(wh->i_addr3, bssid); 145 } 146 *(u_int16_t *)&wh->i_dur[0] = 0; 147 /* NB: use non-QoS tid */ 148 *(u_int16_t *)&wh->i_seq[0] = 149 htole16(ni->ni_txseqs[0] << IEEE80211_SEQ_SEQ_SHIFT); 150 ni->ni_txseqs[0]++; 151 #undef WH4 152 } 153 154 /* 155 * Send a management frame to the specified node. The node pointer 156 * must have a reference as the pointer will be passed to the driver 157 * and potentially held for a long time. If the frame is successfully 158 * dispatched to the driver, then it is responsible for freeing the 159 * reference (and potentially free'ing up any associated storage). 160 */ 161 static int 162 ieee80211_mgmt_output(struct ieee80211com *ic, struct ieee80211_node *ni, 163 struct mbuf *m, int type, int timer) 164 { 165 struct ifnet *ifp = ic->ic_ifp; 166 struct ieee80211_frame *wh; 167 168 IASSERT(ni != NULL, ("null node")); 169 170 /* 171 * Yech, hack alert! We want to pass the node down to the 172 * driver's start routine. If we don't do so then the start 173 * routine must immediately look it up again and that can 174 * cause a lock order reversal if, for example, this frame 175 * is being sent because the station is being timedout and 176 * the frame being sent is a DEAUTH message. We could stick 177 * this in an m_tag and tack that on to the mbuf. However 178 * that's rather expensive to do for every frame so instead 179 * we stuff it in the rcvif field since outbound frames do 180 * not (presently) use this. 181 */ 182 M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT); 183 if (m == NULL) 184 return ENOMEM; 185 #ifdef __FreeBSD__ 186 KASSERT(m->m_pkthdr.rcvif == NULL, ("rcvif not null")); 187 #endif 188 m->m_pkthdr.rcvif = (void *)ni; 189 190 wh = mtod(m, struct ieee80211_frame *); 191 ieee80211_send_setup(ic, ni, wh, 192 IEEE80211_FC0_TYPE_MGT | type, 193 ic->ic_myaddr, ni->ni_macaddr, ni->ni_bssid); 194 if ((m->m_flags & M_LINK0) != 0 && ni->ni_challenge != NULL) { 195 m->m_flags &= ~M_LINK0; 196 IEEE80211_DPRINTF(ic, IEEE80211_MSG_AUTH, 197 "[%s] encrypting frame (%s)\n", 198 ether_sprintf(wh->i_addr1), __func__); 199 wh->i_fc[1] |= IEEE80211_FC1_WEP; 200 } 201 #ifdef IEEE80211_DEBUG 202 /* avoid printing too many frames */ 203 if ((ieee80211_msg_debug(ic) && doprint(ic, type)) || 204 ieee80211_msg_dumppkts(ic)) { 205 printf("[%s] send %s on channel %u\n", 206 ether_sprintf(wh->i_addr1), 207 ieee80211_mgt_subtype_name[ 208 (type & IEEE80211_FC0_SUBTYPE_MASK) >> 209 IEEE80211_FC0_SUBTYPE_SHIFT], 210 ieee80211_chan2ieee(ic, ic->ic_curchan)); 211 } 212 #endif 213 IEEE80211_NODE_STAT(ni, tx_mgmt); 214 IF_ENQUEUE(&ic->ic_mgtq, m); 215 if (timer) { 216 /* 217 * Set the mgt frame timeout. 218 */ 219 ic->ic_mgt_timer = timer; 220 ifp->if_timer = 1; 221 } 222 (*ifp->if_start)(ifp); 223 return 0; 224 } 225 226 /* 227 * Send a null data frame to the specified node. 228 * 229 * NB: the caller is assumed to have setup a node reference 230 * for use; this is necessary to deal with a race condition 231 * when probing for inactive stations. 232 */ 233 int 234 ieee80211_send_nulldata(struct ieee80211_node *ni) 235 { 236 struct ieee80211com *ic = ni->ni_ic; 237 struct ifnet *ifp = ic->ic_ifp; 238 struct mbuf *m; 239 struct ieee80211_frame *wh; 240 241 MGETHDR(m, M_NOWAIT, MT_HEADER); 242 if (m == NULL) { 243 /* XXX debug msg */ 244 ic->ic_stats.is_tx_nobuf++; 245 ieee80211_unref_node(&ni); 246 return ENOMEM; 247 } 248 m->m_pkthdr.rcvif = (void *) ni; 249 250 wh = mtod(m, struct ieee80211_frame *); 251 ieee80211_send_setup(ic, ni, wh, 252 IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_NODATA, 253 ic->ic_myaddr, ni->ni_macaddr, ni->ni_bssid); 254 /* NB: power management bit is never sent by an AP */ 255 if ((ni->ni_flags & IEEE80211_NODE_PWR_MGT) && 256 ic->ic_opmode != IEEE80211_M_HOSTAP) 257 wh->i_fc[1] |= IEEE80211_FC1_PWR_MGT; 258 m->m_len = m->m_pkthdr.len = sizeof(struct ieee80211_frame); 259 260 IEEE80211_NODE_STAT(ni, tx_data); 261 262 IEEE80211_DPRINTF(ic, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, 263 "[%s] send null data frame on channel %u, pwr mgt %s\n", 264 ether_sprintf(ni->ni_macaddr), 265 ieee80211_chan2ieee(ic, ic->ic_curchan), 266 wh->i_fc[1] & IEEE80211_FC1_PWR_MGT ? "ena" : "dis"); 267 268 IF_ENQUEUE(&ic->ic_mgtq, m); /* cheat */ 269 (*ifp->if_start)(ifp); 270 271 return 0; 272 } 273 274 /* 275 * Assign priority to a frame based on any vlan tag assigned 276 * to the station and/or any Diffserv setting in an IP header. 277 * Finally, if an ACM policy is setup (in station mode) it's 278 * applied. 279 */ 280 int 281 ieee80211_classify(struct ieee80211com *ic, struct mbuf *m, struct ieee80211_node *ni) 282 { 283 int v_wme_ac, d_wme_ac, ac; 284 #ifdef INET 285 struct ether_header *eh; 286 #endif 287 288 if ((ni->ni_flags & IEEE80211_NODE_QOS) == 0) { 289 ac = WME_AC_BE; 290 goto done; 291 } 292 293 /* 294 * If node has a vlan tag then all traffic 295 * to it must have a matching tag. 296 */ 297 v_wme_ac = 0; 298 if (ni->ni_vlan != 0) { 299 /* XXX used to check ec_nvlans. */ 300 struct m_tag *mtag = m_tag_find(m, PACKET_TAG_VLAN, NULL); 301 if (mtag == NULL) { 302 IEEE80211_NODE_STAT(ni, tx_novlantag); 303 return 1; 304 } 305 if (EVL_VLANOFTAG(VLAN_TAG_VALUE(mtag)) != 306 EVL_VLANOFTAG(ni->ni_vlan)) { 307 IEEE80211_NODE_STAT(ni, tx_vlanmismatch); 308 return 1; 309 } 310 /* map vlan priority to AC */ 311 switch (EVL_PRIOFTAG(ni->ni_vlan)) { 312 case 1: 313 case 2: 314 v_wme_ac = WME_AC_BK; 315 break; 316 case 0: 317 case 3: 318 v_wme_ac = WME_AC_BE; 319 break; 320 case 4: 321 case 5: 322 v_wme_ac = WME_AC_VI; 323 break; 324 case 6: 325 case 7: 326 v_wme_ac = WME_AC_VO; 327 break; 328 } 329 } 330 331 #ifdef INET 332 eh = mtod(m, struct ether_header *); 333 if (eh->ether_type == htons(ETHERTYPE_IP)) { 334 const struct ip *ip = (struct ip *) 335 (mtod(m, u_int8_t *) + sizeof (*eh)); 336 /* 337 * IP frame, map the TOS field. 338 */ 339 switch (ip->ip_tos) { 340 case 0x08: 341 case 0x20: 342 d_wme_ac = WME_AC_BK; /* background */ 343 break; 344 case 0x28: 345 case 0xa0: 346 d_wme_ac = WME_AC_VI; /* video */ 347 break; 348 case 0x30: /* voice */ 349 case 0xe0: 350 case 0x88: /* XXX UPSD */ 351 case 0xb8: 352 d_wme_ac = WME_AC_VO; 353 break; 354 default: 355 d_wme_ac = WME_AC_BE; 356 break; 357 } 358 } else { 359 #endif /* INET */ 360 d_wme_ac = WME_AC_BE; 361 #ifdef INET 362 } 363 #endif 364 /* 365 * Use highest priority AC. 366 */ 367 if (v_wme_ac > d_wme_ac) 368 ac = v_wme_ac; 369 else 370 ac = d_wme_ac; 371 372 /* 373 * Apply ACM policy. 374 */ 375 if (ic->ic_opmode == IEEE80211_M_STA) { 376 static const int acmap[4] = { 377 WME_AC_BK, /* WME_AC_BE */ 378 WME_AC_BK, /* WME_AC_BK */ 379 WME_AC_BE, /* WME_AC_VI */ 380 WME_AC_VI, /* WME_AC_VO */ 381 }; 382 while (ac != WME_AC_BK && 383 ic->ic_wme.wme_wmeBssChanParams.cap_wmeParams[ac].wmep_acm) 384 ac = acmap[ac]; 385 } 386 done: 387 M_WME_SETAC(m, ac); 388 return 0; 389 } 390 391 /* 392 * Insure there is sufficient contiguous space to encapsulate the 393 * 802.11 data frame. If room isn't already there, arrange for it. 394 * Drivers and cipher modules assume we have done the necessary work 395 * and fail rudely if they don't find the space they need. 396 */ 397 static struct mbuf * 398 ieee80211_mbuf_adjust(struct ieee80211com *ic, int hdrsize, 399 struct ieee80211_key *key, struct mbuf *m) 400 { 401 #define TO_BE_RECLAIMED (sizeof(struct ether_header) - sizeof(struct llc)) 402 int needed_space = hdrsize; 403 int wlen = 0; 404 405 if (key != NULL) { 406 /* XXX belongs in crypto code? */ 407 needed_space += key->wk_cipher->ic_header; 408 /* XXX frags */ 409 } 410 /* 411 * We know we are called just before stripping an Ethernet 412 * header and prepending an LLC header. This means we know 413 * there will be 414 * sizeof(struct ether_header) - sizeof(struct llc) 415 * bytes recovered to which we need additional space for the 416 * 802.11 header and any crypto header. 417 */ 418 /* XXX check trailing space and copy instead? */ 419 if (M_LEADINGSPACE(m) < needed_space - TO_BE_RECLAIMED) { 420 struct mbuf *n = m_gethdr(M_NOWAIT, m->m_type); 421 if (n == NULL) { 422 IEEE80211_DPRINTF(ic, IEEE80211_MSG_OUTPUT, 423 "%s: cannot expand storage\n", __func__); 424 ic->ic_stats.is_tx_nobuf++; 425 m_freem(m); 426 return NULL; 427 } 428 IASSERT(needed_space <= MHLEN, 429 ("not enough room, need %u got %zu\n", needed_space, MHLEN)); 430 /* 431 * Setup new mbuf to have leading space to prepend the 432 * 802.11 header and any crypto header bits that are 433 * required (the latter are added when the driver calls 434 * back to ieee80211_crypto_encap to do crypto encapsulation). 435 */ 436 /* NB: must be first 'cuz it clobbers m_data */ 437 M_MOVE_PKTHDR(n, m); 438 n->m_len = 0; /* NB: m_gethdr does not set */ 439 n->m_data += needed_space; 440 /* 441 * Pull up Ethernet header to create the expected layout. 442 * We could use m_pullup but that's overkill (i.e. we don't 443 * need the actual data) and it cannot fail so do it inline 444 * for speed. 445 */ 446 /* NB: struct ether_header is known to be contiguous */ 447 n->m_len += sizeof(struct ether_header); 448 m->m_len -= sizeof(struct ether_header); 449 m->m_data += sizeof(struct ether_header); 450 /* 451 * Replace the head of the chain. 452 */ 453 n->m_next = m; 454 m = n; 455 } else { 456 /* We will overwrite the ethernet header in the 457 * 802.11 encapsulation stage. Make sure that it 458 * is writable. 459 */ 460 wlen = sizeof(struct ether_header); 461 } 462 463 /* 464 * If we're going to s/w encrypt the mbuf chain make sure it is 465 * writable. 466 */ 467 if (key != NULL && (key->wk_flags & IEEE80211_KEY_SWCRYPT) != 0) 468 wlen = M_COPYALL; 469 470 if (wlen != 0 && m_makewritable(&m, 0, wlen, M_DONTWAIT) != 0) { 471 m_freem(m); 472 return NULL; 473 } 474 return m; 475 #undef TO_BE_RECLAIMED 476 } 477 478 /* 479 * Return the transmit key to use in sending a unicast frame. 480 * If a unicast key is set we use that. When no unicast key is set 481 * we fall back to the default transmit key. 482 */ 483 static __inline struct ieee80211_key * 484 ieee80211_crypto_getucastkey(struct ieee80211com *ic, struct ieee80211_node *ni) 485 { 486 if (IEEE80211_KEY_UNDEFINED(ni->ni_ucastkey)) { 487 if (ic->ic_def_txkey == IEEE80211_KEYIX_NONE || 488 IEEE80211_KEY_UNDEFINED(ic->ic_nw_keys[ic->ic_def_txkey])) 489 return NULL; 490 return &ic->ic_nw_keys[ic->ic_def_txkey]; 491 } else { 492 return &ni->ni_ucastkey; 493 } 494 } 495 496 /* 497 * Return the transmit key to use in sending a multicast frame. 498 * Multicast traffic always uses the group key which is installed as 499 * the default tx key. 500 */ 501 static __inline struct ieee80211_key * 502 ieee80211_crypto_getmcastkey(struct ieee80211com *ic, 503 struct ieee80211_node *ni __unused) 504 { 505 if (ic->ic_def_txkey == IEEE80211_KEYIX_NONE || 506 IEEE80211_KEY_UNDEFINED(ic->ic_nw_keys[ic->ic_def_txkey])) 507 return NULL; 508 return &ic->ic_nw_keys[ic->ic_def_txkey]; 509 } 510 511 /* 512 * Encapsulate an outbound data frame. The mbuf chain is updated. 513 * If an error is encountered NULL is returned. The caller is required 514 * to provide a node reference and pullup the ethernet header in the 515 * first mbuf. 516 */ 517 struct mbuf * 518 ieee80211_encap(struct ieee80211com *ic, struct mbuf *m, 519 struct ieee80211_node *ni) 520 { 521 struct ether_header eh; 522 struct ieee80211_frame *wh; 523 struct ieee80211_key *key; 524 struct llc *llc; 525 int hdrsize, datalen, addqos; 526 527 IASSERT(m->m_len >= sizeof(eh), ("no ethernet header!")); 528 memcpy(&eh, mtod(m, caddr_t), sizeof(struct ether_header)); 529 530 /* 531 * Insure space for additional headers. First identify 532 * transmit key to use in calculating any buffer adjustments 533 * required. This is also used below to do privacy 534 * encapsulation work. Then calculate the 802.11 header 535 * size and any padding required by the driver. 536 * 537 * Note key may be NULL if we fall back to the default 538 * transmit key and that is not set. In that case the 539 * buffer may not be expanded as needed by the cipher 540 * routines, but they will/should discard it. 541 */ 542 if (ic->ic_flags & IEEE80211_F_PRIVACY) { 543 if (ic->ic_opmode == IEEE80211_M_STA || 544 !IEEE80211_IS_MULTICAST(eh.ether_dhost)) 545 key = ieee80211_crypto_getucastkey(ic, ni); 546 else 547 key = ieee80211_crypto_getmcastkey(ic, ni); 548 if (key == NULL && eh.ether_type != htons(ETHERTYPE_PAE)) { 549 IEEE80211_DPRINTF(ic, IEEE80211_MSG_CRYPTO, 550 "[%s] no default transmit key (%s) deftxkey %u\n", 551 ether_sprintf(eh.ether_dhost), __func__, 552 ic->ic_def_txkey); 553 ic->ic_stats.is_tx_nodefkey++; 554 } 555 } else 556 key = NULL; 557 /* XXX 4-address format */ 558 /* 559 * XXX Some ap's don't handle QoS-encapsulated EAPOL 560 * frames so suppress use. This may be an issue if other 561 * ap's require all data frames to be QoS-encapsulated 562 * once negotiated in which case we'll need to make this 563 * configurable. 564 */ 565 addqos = (ni->ni_flags & IEEE80211_NODE_QOS) && 566 eh.ether_type != htons(ETHERTYPE_PAE); 567 if (addqos) 568 hdrsize = sizeof(struct ieee80211_qosframe); 569 else 570 hdrsize = sizeof(struct ieee80211_frame); 571 if (ic->ic_flags & IEEE80211_F_DATAPAD) 572 hdrsize = roundup(hdrsize, sizeof(u_int32_t)); 573 m = ieee80211_mbuf_adjust(ic, hdrsize, key, m); 574 if (m == NULL) { 575 /* NB: ieee80211_mbuf_adjust handles msgs+statistics */ 576 goto bad; 577 } 578 579 /* NB: this could be optimized because of ieee80211_mbuf_adjust */ 580 m_adj(m, sizeof(struct ether_header) - sizeof(struct llc)); 581 llc = mtod(m, struct llc *); 582 llc->llc_dsap = llc->llc_ssap = LLC_SNAP_LSAP; 583 llc->llc_control = LLC_UI; 584 llc->llc_snap.org_code[0] = 0; 585 llc->llc_snap.org_code[1] = 0; 586 llc->llc_snap.org_code[2] = 0; 587 llc->llc_snap.ether_type = eh.ether_type; 588 datalen = m->m_pkthdr.len; /* NB: w/o 802.11 header */ 589 590 M_PREPEND(m, hdrsize, M_DONTWAIT); 591 if (m == NULL) { 592 ic->ic_stats.is_tx_nobuf++; 593 goto bad; 594 } 595 wh = mtod(m, struct ieee80211_frame *); 596 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_DATA; 597 *(u_int16_t *)wh->i_dur = 0; 598 switch (ic->ic_opmode) { 599 case IEEE80211_M_STA: 600 wh->i_fc[1] = IEEE80211_FC1_DIR_TODS; 601 IEEE80211_ADDR_COPY(wh->i_addr1, ni->ni_bssid); 602 IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); 603 IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_dhost); 604 break; 605 case IEEE80211_M_IBSS: 606 case IEEE80211_M_AHDEMO: 607 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 608 IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); 609 IEEE80211_ADDR_COPY(wh->i_addr2, eh.ether_shost); 610 /* 611 * NB: always use the bssid from ic_bss as the 612 * neighbor's may be stale after an ibss merge 613 */ 614 IEEE80211_ADDR_COPY(wh->i_addr3, ic->ic_bss->ni_bssid); 615 break; 616 case IEEE80211_M_HOSTAP: 617 #ifndef IEEE80211_NO_HOSTAP 618 wh->i_fc[1] = IEEE80211_FC1_DIR_FROMDS; 619 IEEE80211_ADDR_COPY(wh->i_addr1, eh.ether_dhost); 620 IEEE80211_ADDR_COPY(wh->i_addr2, ni->ni_bssid); 621 IEEE80211_ADDR_COPY(wh->i_addr3, eh.ether_shost); 622 #endif /* !IEEE80211_NO_HOSTAP */ 623 break; 624 case IEEE80211_M_MONITOR: 625 goto bad; 626 } 627 if (m->m_flags & M_MORE_DATA) 628 wh->i_fc[1] |= IEEE80211_FC1_MORE_DATA; 629 if (addqos) { 630 struct ieee80211_qosframe *qwh = 631 (struct ieee80211_qosframe *) wh; 632 int ac, tid; 633 634 ac = M_WME_GETAC(m); 635 /* map from access class/queue to 11e header priorty value */ 636 tid = WME_AC_TO_TID(ac); 637 qwh->i_qos[0] = tid & IEEE80211_QOS_TID; 638 if (ic->ic_wme.wme_wmeChanParams.cap_wmeParams[ac].wmep_noackPolicy) 639 qwh->i_qos[0] |= 1 << IEEE80211_QOS_ACKPOLICY_S; 640 qwh->i_qos[1] = 0; 641 qwh->i_fc[0] |= IEEE80211_FC0_SUBTYPE_QOS; 642 643 *(u_int16_t *)wh->i_seq = 644 htole16(ni->ni_txseqs[tid] << IEEE80211_SEQ_SEQ_SHIFT); 645 ni->ni_txseqs[tid]++; 646 } else { 647 *(u_int16_t *)wh->i_seq = 648 htole16(ni->ni_txseqs[0] << IEEE80211_SEQ_SEQ_SHIFT); 649 ni->ni_txseqs[0]++; 650 } 651 if (key != NULL) { 652 /* 653 * IEEE 802.1X: send EAPOL frames always in the clear. 654 * WPA/WPA2: encrypt EAPOL keys when pairwise keys are set. 655 */ 656 if (eh.ether_type != htons(ETHERTYPE_PAE) || 657 ((ic->ic_flags & IEEE80211_F_WPA) && 658 (ic->ic_opmode == IEEE80211_M_STA ? 659 !IEEE80211_KEY_UNDEFINED(*key) : 660 !IEEE80211_KEY_UNDEFINED(ni->ni_ucastkey)))) { 661 wh->i_fc[1] |= IEEE80211_FC1_WEP; 662 /* XXX do fragmentation */ 663 if (!ieee80211_crypto_enmic(ic, key, m, 0)) { 664 IEEE80211_DPRINTF(ic, IEEE80211_MSG_OUTPUT, 665 "[%s] enmic failed, discard frame\n", 666 ether_sprintf(eh.ether_dhost)); 667 ic->ic_stats.is_crypto_enmicfail++; 668 goto bad; 669 } 670 } 671 } 672 673 IEEE80211_NODE_STAT(ni, tx_data); 674 IEEE80211_NODE_STAT_ADD(ni, tx_bytes, datalen); 675 676 return m; 677 bad: 678 if (m != NULL) 679 m_freem(m); 680 return NULL; 681 } 682 683 /* 684 * Arguments in: 685 * 686 * paylen: payload length (no FCS, no WEP header) 687 * 688 * hdrlen: header length 689 * 690 * rate: MSDU speed, units 500kb/s 691 * 692 * flags: IEEE80211_F_SHPREAMBLE (use short preamble), 693 * IEEE80211_F_SHSLOT (use short slot length) 694 * 695 * Arguments out: 696 * 697 * d: 802.11 Duration field for RTS, 698 * 802.11 Duration field for data frame, 699 * PLCP Length for data frame, 700 * residual octets at end of data slot 701 */ 702 static int 703 ieee80211_compute_duration1(int len, int use_ack, uint32_t icflags, int rate, 704 struct ieee80211_duration *d) 705 { 706 int pre, ctsrate; 707 int ack, bitlen, data_dur, remainder; 708 709 /* RTS reserves medium for SIFS | CTS | SIFS | (DATA) | SIFS | ACK 710 * DATA reserves medium for SIFS | ACK 711 * 712 * XXXMYC: no ACK on multicast/broadcast or control packets 713 */ 714 715 bitlen = len * 8; 716 717 pre = IEEE80211_DUR_DS_SIFS; 718 if ((icflags & IEEE80211_F_SHPREAMBLE) != 0) 719 pre += IEEE80211_DUR_DS_SHORT_PREAMBLE + IEEE80211_DUR_DS_FAST_PLCPHDR; 720 else 721 pre += IEEE80211_DUR_DS_LONG_PREAMBLE + IEEE80211_DUR_DS_SLOW_PLCPHDR; 722 723 d->d_residue = 0; 724 data_dur = (bitlen * 2) / rate; 725 remainder = (bitlen * 2) % rate; 726 if (remainder != 0) { 727 d->d_residue = (rate - remainder) / 16; 728 data_dur++; 729 } 730 731 switch (rate) { 732 case 2: /* 1 Mb/s */ 733 case 4: /* 2 Mb/s */ 734 /* 1 - 2 Mb/s WLAN: send ACK/CTS at 1 Mb/s */ 735 ctsrate = 2; 736 break; 737 case 11: /* 5.5 Mb/s */ 738 case 22: /* 11 Mb/s */ 739 case 44: /* 22 Mb/s */ 740 /* 5.5 - 11 Mb/s WLAN: send ACK/CTS at 2 Mb/s */ 741 ctsrate = 4; 742 break; 743 default: 744 /* TBD */ 745 return -1; 746 } 747 748 d->d_plcp_len = data_dur; 749 750 ack = (use_ack) ? pre + (IEEE80211_DUR_DS_SLOW_ACK * 2) / ctsrate : 0; 751 752 d->d_rts_dur = 753 pre + (IEEE80211_DUR_DS_SLOW_CTS * 2) / ctsrate + 754 pre + data_dur + 755 ack; 756 757 d->d_data_dur = ack; 758 759 return 0; 760 } 761 762 /* 763 * Arguments in: 764 * 765 * wh: 802.11 header 766 * 767 * paylen: payload length (no FCS, no WEP header) 768 * 769 * rate: MSDU speed, units 500kb/s 770 * 771 * fraglen: fragment length, set to maximum (or higher) for no 772 * fragmentation 773 * 774 * flags: IEEE80211_F_PRIVACY (hardware adds WEP), 775 * IEEE80211_F_SHPREAMBLE (use short preamble), 776 * IEEE80211_F_SHSLOT (use short slot length) 777 * 778 * Arguments out: 779 * 780 * d0: 802.11 Duration fields (RTS/Data), PLCP Length, Service fields 781 * of first/only fragment 782 * 783 * dn: 802.11 Duration fields (RTS/Data), PLCP Length, Service fields 784 * of last fragment 785 * 786 * ieee80211_compute_duration assumes crypto-encapsulation, if any, 787 * has already taken place. 788 */ 789 int 790 ieee80211_compute_duration(const struct ieee80211_frame_min *wh, 791 const struct ieee80211_key *wk, int len, 792 uint32_t icflags, int fraglen, int rate, struct ieee80211_duration *d0, 793 struct ieee80211_duration *dn, int *npktp, int debug) 794 { 795 int ack, rc; 796 int cryptolen, /* crypto overhead: header+trailer */ 797 firstlen, /* first fragment's payload + overhead length */ 798 hdrlen, /* header length w/o driver padding */ 799 lastlen, /* last fragment's payload length w/ overhead */ 800 lastlen0, /* last fragment's payload length w/o overhead */ 801 npkt, /* number of fragments */ 802 overlen, /* non-802.11 header overhead per fragment */ 803 paylen; /* payload length w/o overhead */ 804 805 hdrlen = ieee80211_anyhdrsize((const void *)wh); 806 807 /* Account for padding required by the driver. */ 808 if (icflags & IEEE80211_F_DATAPAD) 809 paylen = len - roundup(hdrlen, sizeof(u_int32_t)); 810 else 811 paylen = len - hdrlen; 812 813 overlen = IEEE80211_CRC_LEN; 814 815 if (wk != NULL) { 816 cryptolen = wk->wk_cipher->ic_header + 817 wk->wk_cipher->ic_trailer; 818 paylen -= cryptolen; 819 overlen += cryptolen; 820 } 821 822 npkt = paylen / fraglen; 823 lastlen0 = paylen % fraglen; 824 825 if (npkt == 0) /* no fragments */ 826 lastlen = paylen + overlen; 827 else if (lastlen0 != 0) { /* a short "tail" fragment */ 828 lastlen = lastlen0 + overlen; 829 npkt++; 830 } else /* full-length "tail" fragment */ 831 lastlen = fraglen + overlen; 832 833 if (npktp != NULL) 834 *npktp = npkt; 835 836 if (npkt > 1) 837 firstlen = fraglen + overlen; 838 else 839 firstlen = paylen + overlen; 840 841 if (debug) { 842 printf("%s: npkt %d firstlen %d lastlen0 %d lastlen %d " 843 "fraglen %d overlen %d len %d rate %d icflags %08x\n", 844 __func__, npkt, firstlen, lastlen0, lastlen, fraglen, 845 overlen, len, rate, icflags); 846 } 847 848 ack = !IEEE80211_IS_MULTICAST(wh->i_addr1) && 849 (wh->i_fc[1] & IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_CTL; 850 851 rc = ieee80211_compute_duration1(firstlen + hdrlen, 852 ack, icflags, rate, d0); 853 if (rc == -1) 854 return rc; 855 856 if (npkt <= 1) { 857 *dn = *d0; 858 return 0; 859 } 860 return ieee80211_compute_duration1(lastlen + hdrlen, ack, icflags, rate, 861 dn); 862 } 863 864 /* 865 * Add a supported rates element id to a frame. 866 */ 867 static u_int8_t * 868 ieee80211_add_rates(u_int8_t *frm, const struct ieee80211_rateset *rs) 869 { 870 int nrates; 871 872 *frm++ = IEEE80211_ELEMID_RATES; 873 nrates = rs->rs_nrates; 874 if (nrates > IEEE80211_RATE_SIZE) 875 nrates = IEEE80211_RATE_SIZE; 876 *frm++ = nrates; 877 memcpy(frm, rs->rs_rates, nrates); 878 return frm + nrates; 879 } 880 881 /* 882 * Add an extended supported rates element id to a frame. 883 */ 884 static u_int8_t * 885 ieee80211_add_xrates(u_int8_t *frm, const struct ieee80211_rateset *rs) 886 { 887 /* 888 * Add an extended supported rates element if operating in 11g mode. 889 */ 890 if (rs->rs_nrates > IEEE80211_RATE_SIZE) { 891 int nrates = rs->rs_nrates - IEEE80211_RATE_SIZE; 892 *frm++ = IEEE80211_ELEMID_XRATES; 893 *frm++ = nrates; 894 memcpy(frm, rs->rs_rates + IEEE80211_RATE_SIZE, nrates); 895 frm += nrates; 896 } 897 return frm; 898 } 899 900 /* 901 * Add an ssid elemet to a frame. 902 */ 903 static u_int8_t * 904 ieee80211_add_ssid(u_int8_t *frm, const u_int8_t *ssid, u_int len) 905 { 906 *frm++ = IEEE80211_ELEMID_SSID; 907 *frm++ = len; 908 memcpy(frm, ssid, len); 909 return frm + len; 910 } 911 912 /* 913 * Add an erp element to a frame. 914 */ 915 static u_int8_t * 916 ieee80211_add_erp(u_int8_t *frm, struct ieee80211com *ic) 917 { 918 u_int8_t erp; 919 920 *frm++ = IEEE80211_ELEMID_ERP; 921 *frm++ = 1; 922 erp = 0; 923 if (ic->ic_nonerpsta != 0) 924 erp |= IEEE80211_ERP_NON_ERP_PRESENT; 925 if (ic->ic_flags & IEEE80211_F_USEPROT) 926 erp |= IEEE80211_ERP_USE_PROTECTION; 927 if (ic->ic_flags & IEEE80211_F_USEBARKER) 928 erp |= IEEE80211_ERP_LONG_PREAMBLE; 929 *frm++ = erp; 930 return frm; 931 } 932 933 static u_int8_t * 934 ieee80211_setup_wpa_ie(struct ieee80211com *ic, u_int8_t *ie) 935 { 936 #define WPA_OUI_BYTES 0x00, 0x50, 0xf2 937 #define ADDSHORT(frm, v) do { \ 938 frm[0] = (v) & 0xff; \ 939 frm[1] = (v) >> 8; \ 940 frm += 2; \ 941 } while (0) 942 #define ADDSELECTOR(frm, sel) do { \ 943 memcpy(frm, sel, 4); \ 944 frm += 4; \ 945 } while (0) 946 static const u_int8_t oui[4] = { WPA_OUI_BYTES, WPA_OUI_TYPE }; 947 static const u_int8_t cipher_suite[][4] = { 948 { WPA_OUI_BYTES, WPA_CSE_WEP40 }, /* NB: 40-bit */ 949 { WPA_OUI_BYTES, WPA_CSE_TKIP }, 950 { 0x00, 0x00, 0x00, 0x00 }, /* XXX WRAP */ 951 { WPA_OUI_BYTES, WPA_CSE_CCMP }, 952 { 0x00, 0x00, 0x00, 0x00 }, /* XXX CKIP */ 953 { WPA_OUI_BYTES, WPA_CSE_NULL }, 954 }; 955 static const u_int8_t wep104_suite[4] = 956 { WPA_OUI_BYTES, WPA_CSE_WEP104 }; 957 static const u_int8_t key_mgt_unspec[4] = 958 { WPA_OUI_BYTES, WPA_ASE_8021X_UNSPEC }; 959 static const u_int8_t key_mgt_psk[4] = 960 { WPA_OUI_BYTES, WPA_ASE_8021X_PSK }; 961 const struct ieee80211_rsnparms *rsn = &ic->ic_bss->ni_rsn; 962 u_int8_t *frm = ie; 963 u_int8_t *selcnt; 964 965 *frm++ = IEEE80211_ELEMID_VENDOR; 966 *frm++ = 0; /* length filled in below */ 967 memcpy(frm, oui, sizeof(oui)); /* WPA OUI */ 968 frm += sizeof(oui); 969 ADDSHORT(frm, WPA_VERSION); 970 971 /* XXX filter out CKIP */ 972 973 /* multicast cipher */ 974 if (rsn->rsn_mcastcipher == IEEE80211_CIPHER_WEP && 975 rsn->rsn_mcastkeylen >= 13) 976 ADDSELECTOR(frm, wep104_suite); 977 else 978 ADDSELECTOR(frm, cipher_suite[rsn->rsn_mcastcipher]); 979 980 /* unicast cipher list */ 981 selcnt = frm; 982 ADDSHORT(frm, 0); /* selector count */ 983 if (rsn->rsn_ucastcipherset & (1<<IEEE80211_CIPHER_AES_CCM)) { 984 selcnt[0]++; 985 ADDSELECTOR(frm, cipher_suite[IEEE80211_CIPHER_AES_CCM]); 986 } 987 if (rsn->rsn_ucastcipherset & (1<<IEEE80211_CIPHER_TKIP)) { 988 selcnt[0]++; 989 ADDSELECTOR(frm, cipher_suite[IEEE80211_CIPHER_TKIP]); 990 } 991 992 /* authenticator selector list */ 993 selcnt = frm; 994 ADDSHORT(frm, 0); /* selector count */ 995 if (rsn->rsn_keymgmtset & WPA_ASE_8021X_UNSPEC) { 996 selcnt[0]++; 997 ADDSELECTOR(frm, key_mgt_unspec); 998 } 999 if (rsn->rsn_keymgmtset & WPA_ASE_8021X_PSK) { 1000 selcnt[0]++; 1001 ADDSELECTOR(frm, key_mgt_psk); 1002 } 1003 1004 /* optional capabilities */ 1005 if (rsn->rsn_caps != 0 && rsn->rsn_caps != RSN_CAP_PREAUTH) 1006 ADDSHORT(frm, rsn->rsn_caps); 1007 1008 /* calculate element length */ 1009 ie[1] = frm - ie - 2; 1010 IASSERT(ie[1]+2 <= sizeof(struct ieee80211_ie_wpa), 1011 ("WPA IE too big, %u > %zu", 1012 ie[1]+2, sizeof(struct ieee80211_ie_wpa))); 1013 return frm; 1014 #undef ADDSHORT 1015 #undef ADDSELECTOR 1016 #undef WPA_OUI_BYTES 1017 } 1018 1019 static u_int8_t * 1020 ieee80211_setup_rsn_ie(struct ieee80211com *ic, u_int8_t *ie) 1021 { 1022 #define RSN_OUI_BYTES 0x00, 0x0f, 0xac 1023 #define ADDSHORT(frm, v) do { \ 1024 frm[0] = (v) & 0xff; \ 1025 frm[1] = (v) >> 8; \ 1026 frm += 2; \ 1027 } while (0) 1028 #define ADDSELECTOR(frm, sel) do { \ 1029 memcpy(frm, sel, 4); \ 1030 frm += 4; \ 1031 } while (0) 1032 static const u_int8_t cipher_suite[][4] = { 1033 { RSN_OUI_BYTES, RSN_CSE_WEP40 }, /* NB: 40-bit */ 1034 { RSN_OUI_BYTES, RSN_CSE_TKIP }, 1035 { RSN_OUI_BYTES, RSN_CSE_WRAP }, 1036 { RSN_OUI_BYTES, RSN_CSE_CCMP }, 1037 { 0x00, 0x00, 0x00, 0x00 }, /* XXX CKIP */ 1038 { RSN_OUI_BYTES, RSN_CSE_NULL }, 1039 }; 1040 static const u_int8_t wep104_suite[4] = 1041 { RSN_OUI_BYTES, RSN_CSE_WEP104 }; 1042 static const u_int8_t key_mgt_unspec[4] = 1043 { RSN_OUI_BYTES, RSN_ASE_8021X_UNSPEC }; 1044 static const u_int8_t key_mgt_psk[4] = 1045 { RSN_OUI_BYTES, RSN_ASE_8021X_PSK }; 1046 const struct ieee80211_rsnparms *rsn = &ic->ic_bss->ni_rsn; 1047 u_int8_t *frm = ie; 1048 u_int8_t *selcnt; 1049 1050 *frm++ = IEEE80211_ELEMID_RSN; 1051 *frm++ = 0; /* length filled in below */ 1052 ADDSHORT(frm, RSN_VERSION); 1053 1054 /* XXX filter out CKIP */ 1055 1056 /* multicast cipher */ 1057 if (rsn->rsn_mcastcipher == IEEE80211_CIPHER_WEP && 1058 rsn->rsn_mcastkeylen >= 13) 1059 ADDSELECTOR(frm, wep104_suite); 1060 else 1061 ADDSELECTOR(frm, cipher_suite[rsn->rsn_mcastcipher]); 1062 1063 /* unicast cipher list */ 1064 selcnt = frm; 1065 ADDSHORT(frm, 0); /* selector count */ 1066 if (rsn->rsn_ucastcipherset & (1<<IEEE80211_CIPHER_AES_CCM)) { 1067 selcnt[0]++; 1068 ADDSELECTOR(frm, cipher_suite[IEEE80211_CIPHER_AES_CCM]); 1069 } 1070 if (rsn->rsn_ucastcipherset & (1<<IEEE80211_CIPHER_TKIP)) { 1071 selcnt[0]++; 1072 ADDSELECTOR(frm, cipher_suite[IEEE80211_CIPHER_TKIP]); 1073 } 1074 1075 /* authenticator selector list */ 1076 selcnt = frm; 1077 ADDSHORT(frm, 0); /* selector count */ 1078 if (rsn->rsn_keymgmtset & WPA_ASE_8021X_UNSPEC) { 1079 selcnt[0]++; 1080 ADDSELECTOR(frm, key_mgt_unspec); 1081 } 1082 if (rsn->rsn_keymgmtset & WPA_ASE_8021X_PSK) { 1083 selcnt[0]++; 1084 ADDSELECTOR(frm, key_mgt_psk); 1085 } 1086 1087 /* optional capabilities */ 1088 ADDSHORT(frm, rsn->rsn_caps); 1089 /* XXX PMKID */ 1090 1091 /* calculate element length */ 1092 ie[1] = frm - ie - 2; 1093 IASSERT(ie[1]+2 <= sizeof(struct ieee80211_ie_wpa), 1094 ("RSN IE too big, %u > %zu", 1095 ie[1]+2, sizeof(struct ieee80211_ie_wpa))); 1096 return frm; 1097 #undef ADDSELECTOR 1098 #undef ADDSHORT 1099 #undef RSN_OUI_BYTES 1100 } 1101 1102 /* 1103 * Add a WPA/RSN element to a frame. 1104 */ 1105 static u_int8_t * 1106 ieee80211_add_wpa(u_int8_t *frm, struct ieee80211com *ic) 1107 { 1108 1109 IASSERT(ic->ic_flags & IEEE80211_F_WPA, ("no WPA/RSN!")); 1110 if (ic->ic_flags & IEEE80211_F_WPA2) 1111 frm = ieee80211_setup_rsn_ie(ic, frm); 1112 if (ic->ic_flags & IEEE80211_F_WPA1) 1113 frm = ieee80211_setup_wpa_ie(ic, frm); 1114 return frm; 1115 } 1116 1117 #define WME_OUI_BYTES 0x00, 0x50, 0xf2 1118 /* 1119 * Add a WME information element to a frame. 1120 */ 1121 static u_int8_t * 1122 ieee80211_add_wme_info(u_int8_t *frm, struct ieee80211_wme_state *wme __unused) 1123 { 1124 static const struct ieee80211_wme_info info = { 1125 .wme_id = IEEE80211_ELEMID_VENDOR, 1126 .wme_len = sizeof(struct ieee80211_wme_info) - 2, 1127 .wme_oui = { WME_OUI_BYTES }, 1128 .wme_type = WME_OUI_TYPE, 1129 .wme_subtype = WME_INFO_OUI_SUBTYPE, 1130 .wme_version = WME_VERSION, 1131 .wme_info = 0, 1132 }; 1133 memcpy(frm, &info, sizeof(info)); 1134 return frm + sizeof(info); 1135 } 1136 1137 /* 1138 * Add a WME parameters element to a frame. 1139 */ 1140 static u_int8_t * 1141 ieee80211_add_wme_param(u_int8_t *frm, struct ieee80211_wme_state *wme) 1142 { 1143 #define SM(_v, _f) (((_v) << _f##_S) & _f) 1144 #define ADDSHORT(frm, v) do { \ 1145 frm[0] = (v) & 0xff; \ 1146 frm[1] = (v) >> 8; \ 1147 frm += 2; \ 1148 } while (0) 1149 /* NB: this works 'cuz a param has an info at the front */ 1150 static const struct ieee80211_wme_info param = { 1151 .wme_id = IEEE80211_ELEMID_VENDOR, 1152 .wme_len = sizeof(struct ieee80211_wme_param) - 2, 1153 .wme_oui = { WME_OUI_BYTES }, 1154 .wme_type = WME_OUI_TYPE, 1155 .wme_subtype = WME_PARAM_OUI_SUBTYPE, 1156 .wme_version = WME_VERSION, 1157 }; 1158 int i; 1159 1160 memcpy(frm, ¶m, sizeof(param)); 1161 frm += __offsetof(struct ieee80211_wme_info, wme_info); 1162 *frm++ = wme->wme_bssChanParams.cap_info; /* AC info */ 1163 *frm++ = 0; /* reserved field */ 1164 for (i = 0; i < WME_NUM_AC; i++) { 1165 const struct wmeParams *ac = 1166 &wme->wme_bssChanParams.cap_wmeParams[i]; 1167 *frm++ = SM(i, WME_PARAM_ACI) 1168 | SM(ac->wmep_acm, WME_PARAM_ACM) 1169 | SM(ac->wmep_aifsn, WME_PARAM_AIFSN) 1170 ; 1171 *frm++ = SM(ac->wmep_logcwmax, WME_PARAM_LOGCWMAX) 1172 | SM(ac->wmep_logcwmin, WME_PARAM_LOGCWMIN) 1173 ; 1174 ADDSHORT(frm, ac->wmep_txopLimit); 1175 } 1176 return frm; 1177 #undef SM 1178 #undef ADDSHORT 1179 } 1180 #undef WME_OUI_BYTES 1181 1182 /* 1183 * Send a probe request frame with the specified ssid 1184 * and any optional information element data. 1185 */ 1186 int 1187 ieee80211_send_probereq(struct ieee80211_node *ni, 1188 const u_int8_t sa[IEEE80211_ADDR_LEN], 1189 const u_int8_t da[IEEE80211_ADDR_LEN], 1190 const u_int8_t bssid[IEEE80211_ADDR_LEN], 1191 const u_int8_t *ssid, size_t ssidlen, 1192 const void *optie, size_t optielen) 1193 { 1194 struct ieee80211com *ic = ni->ni_ic; 1195 enum ieee80211_phymode mode; 1196 struct ieee80211_frame *wh; 1197 struct mbuf *m; 1198 u_int8_t *frm; 1199 1200 /* 1201 * Hold a reference on the node so it doesn't go away until after 1202 * the xmit is complete all the way in the driver. On error we 1203 * will remove our reference. 1204 */ 1205 IEEE80211_DPRINTF(ic, IEEE80211_MSG_NODE, 1206 "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", 1207 __func__, __LINE__, 1208 ni, ether_sprintf(ni->ni_macaddr), 1209 ieee80211_node_refcnt(ni)+1); 1210 ieee80211_ref_node(ni); 1211 1212 /* 1213 * prreq frame format 1214 * [tlv] ssid 1215 * [tlv] supported rates 1216 * [tlv] extended supported rates 1217 * [tlv] user-specified ie's 1218 */ 1219 m = ieee80211_getmgtframe(&frm, 1220 2 + IEEE80211_NWID_LEN 1221 + 2 + IEEE80211_RATE_SIZE 1222 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 1223 + (optie != NULL ? optielen : 0) 1224 ); 1225 if (m == NULL) { 1226 ic->ic_stats.is_tx_nobuf++; 1227 ieee80211_free_node(ni); 1228 return ENOMEM; 1229 } 1230 1231 frm = ieee80211_add_ssid(frm, ssid, ssidlen); 1232 mode = ieee80211_chan2mode(ic, ic->ic_curchan); 1233 frm = ieee80211_add_rates(frm, &ic->ic_sup_rates[mode]); 1234 frm = ieee80211_add_xrates(frm, &ic->ic_sup_rates[mode]); 1235 1236 if (optie != NULL) { 1237 memcpy(frm, optie, optielen); 1238 frm += optielen; 1239 } 1240 m->m_pkthdr.len = m->m_len = frm - mtod(m, u_int8_t *); 1241 1242 M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT); 1243 if (m == NULL) 1244 return ENOMEM; 1245 IASSERT(m->m_pkthdr.rcvif == NULL, ("rcvif not null")); 1246 m->m_pkthdr.rcvif = (void *)ni; 1247 1248 wh = mtod(m, struct ieee80211_frame *); 1249 ieee80211_send_setup(ic, ni, wh, 1250 IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ, 1251 sa, da, bssid); 1252 /* XXX power management? */ 1253 1254 IEEE80211_NODE_STAT(ni, tx_probereq); 1255 IEEE80211_NODE_STAT(ni, tx_mgmt); 1256 1257 IEEE80211_DPRINTF(ic, IEEE80211_MSG_DEBUG | IEEE80211_MSG_DUMPPKTS, 1258 "[%s] send probe req on channel %u\n", 1259 ether_sprintf(wh->i_addr1), 1260 ieee80211_chan2ieee(ic, ic->ic_curchan)); 1261 1262 IF_ENQUEUE(&ic->ic_mgtq, m); 1263 (*ic->ic_ifp->if_start)(ic->ic_ifp); 1264 return 0; 1265 } 1266 1267 /* 1268 * Send a management frame. The node is for the destination (or ic_bss 1269 * when in station mode). Nodes other than ic_bss have their reference 1270 * count bumped to reflect our use for an indeterminant time. 1271 */ 1272 int 1273 ieee80211_send_mgmt(struct ieee80211com *ic, struct ieee80211_node *ni, 1274 int type, int arg) 1275 { 1276 #define senderr(_x, _v) do { ic->ic_stats._v++; ret = _x; goto bad; } while (0) 1277 struct mbuf *m; 1278 u_int8_t *frm; 1279 u_int16_t capinfo; 1280 int has_challenge, is_shared_key, ret, timer, status; 1281 1282 IASSERT(ni != NULL, ("null node")); 1283 1284 /* 1285 * Hold a reference on the node so it doesn't go away until after 1286 * the xmit is complete all the way in the driver. On error we 1287 * will remove our reference. 1288 */ 1289 IEEE80211_DPRINTF(ic, IEEE80211_MSG_NODE, 1290 "ieee80211_ref_node (%s:%u) %p<%s> refcnt %d\n", 1291 __func__, __LINE__, 1292 ni, ether_sprintf(ni->ni_macaddr), 1293 ieee80211_node_refcnt(ni)+1); 1294 ieee80211_ref_node(ni); 1295 1296 timer = 0; 1297 switch (type) { 1298 case IEEE80211_FC0_SUBTYPE_PROBE_RESP: 1299 /* 1300 * probe response frame format 1301 * [8] time stamp 1302 * [2] beacon interval 1303 * [2] cabability information 1304 * [tlv] ssid 1305 * [tlv] supported rates 1306 * [tlv] parameter set (FH/DS) 1307 * [tlv] parameter set (IBSS) 1308 * [tlv] extended rate phy (ERP) 1309 * [tlv] extended supported rates 1310 * [tlv] WPA 1311 * [tlv] WME (optional) 1312 */ 1313 m = ieee80211_getmgtframe(&frm, 1314 8 1315 + sizeof(u_int16_t) 1316 + sizeof(u_int16_t) 1317 + 2 + IEEE80211_NWID_LEN 1318 + 2 + IEEE80211_RATE_SIZE 1319 + 7 /* max(7,3) */ 1320 + 6 1321 + 3 1322 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 1323 /* XXX !WPA1+WPA2 fits w/o a cluster */ 1324 + (ic->ic_flags & IEEE80211_F_WPA ? 1325 2*sizeof(struct ieee80211_ie_wpa) : 0) 1326 + sizeof(struct ieee80211_wme_param) 1327 ); 1328 if (m == NULL) 1329 senderr(ENOMEM, is_tx_nobuf); 1330 1331 memset(frm, 0, 8); /* timestamp should be filled later */ 1332 frm += 8; 1333 *(u_int16_t *)frm = htole16(ic->ic_bss->ni_intval); 1334 frm += 2; 1335 if (ic->ic_opmode == IEEE80211_M_IBSS) 1336 capinfo = IEEE80211_CAPINFO_IBSS; 1337 else 1338 capinfo = IEEE80211_CAPINFO_ESS; 1339 if (ic->ic_flags & IEEE80211_F_PRIVACY) 1340 capinfo |= IEEE80211_CAPINFO_PRIVACY; 1341 if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && 1342 IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) 1343 capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; 1344 if (ic->ic_flags & IEEE80211_F_SHSLOT) 1345 capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; 1346 *(u_int16_t *)frm = htole16(capinfo); 1347 frm += 2; 1348 1349 frm = ieee80211_add_ssid(frm, ic->ic_bss->ni_essid, 1350 ic->ic_bss->ni_esslen); 1351 frm = ieee80211_add_rates(frm, &ni->ni_rates); 1352 1353 if (ic->ic_phytype == IEEE80211_T_FH) { 1354 *frm++ = IEEE80211_ELEMID_FHPARMS; 1355 *frm++ = 5; 1356 *frm++ = ni->ni_fhdwell & 0x00ff; 1357 *frm++ = (ni->ni_fhdwell >> 8) & 0x00ff; 1358 *frm++ = IEEE80211_FH_CHANSET( 1359 ieee80211_chan2ieee(ic, ic->ic_curchan)); 1360 *frm++ = IEEE80211_FH_CHANPAT( 1361 ieee80211_chan2ieee(ic, ic->ic_curchan)); 1362 *frm++ = ni->ni_fhindex; 1363 } else { 1364 *frm++ = IEEE80211_ELEMID_DSPARMS; 1365 *frm++ = 1; 1366 *frm++ = ieee80211_chan2ieee(ic, ic->ic_curchan); 1367 } 1368 1369 if (ic->ic_opmode == IEEE80211_M_IBSS) { 1370 *frm++ = IEEE80211_ELEMID_IBSSPARMS; 1371 *frm++ = 2; 1372 *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ 1373 } 1374 if (ic->ic_flags & IEEE80211_F_WPA) 1375 frm = ieee80211_add_wpa(frm, ic); 1376 if (ic->ic_curmode == IEEE80211_MODE_11G) 1377 frm = ieee80211_add_erp(frm, ic); 1378 frm = ieee80211_add_xrates(frm, &ni->ni_rates); 1379 if (ic->ic_flags & IEEE80211_F_WME) 1380 frm = ieee80211_add_wme_param(frm, &ic->ic_wme); 1381 m->m_pkthdr.len = m->m_len = frm - mtod(m, u_int8_t *); 1382 break; 1383 1384 case IEEE80211_FC0_SUBTYPE_AUTH: 1385 status = arg >> 16; 1386 arg &= 0xffff; 1387 has_challenge = ((arg == IEEE80211_AUTH_SHARED_CHALLENGE || 1388 arg == IEEE80211_AUTH_SHARED_RESPONSE) && 1389 ni->ni_challenge != NULL); 1390 1391 /* 1392 * Deduce whether we're doing open authentication or 1393 * shared key authentication. We do the latter if 1394 * we're in the middle of a shared key authentication 1395 * handshake or if we're initiating an authentication 1396 * request and configured to use shared key. 1397 */ 1398 is_shared_key = has_challenge || 1399 arg >= IEEE80211_AUTH_SHARED_RESPONSE || 1400 (arg == IEEE80211_AUTH_SHARED_REQUEST && 1401 ic->ic_bss->ni_authmode == IEEE80211_AUTH_SHARED); 1402 1403 m = ieee80211_getmgtframe(&frm, 1404 3 * sizeof(u_int16_t) 1405 + (has_challenge && status == IEEE80211_STATUS_SUCCESS ? 1406 sizeof(u_int16_t)+IEEE80211_CHALLENGE_LEN : 0) 1407 ); 1408 if (m == NULL) 1409 senderr(ENOMEM, is_tx_nobuf); 1410 1411 ((u_int16_t *)frm)[0] = 1412 (is_shared_key) ? htole16(IEEE80211_AUTH_ALG_SHARED) 1413 : htole16(IEEE80211_AUTH_ALG_OPEN); 1414 ((u_int16_t *)frm)[1] = htole16(arg); /* sequence number */ 1415 ((u_int16_t *)frm)[2] = htole16(status);/* status */ 1416 1417 if (has_challenge && status == IEEE80211_STATUS_SUCCESS) { 1418 ((u_int16_t *)frm)[3] = 1419 htole16((IEEE80211_CHALLENGE_LEN << 8) | 1420 IEEE80211_ELEMID_CHALLENGE); 1421 memcpy(&((u_int16_t *)frm)[4], ni->ni_challenge, 1422 IEEE80211_CHALLENGE_LEN); 1423 m->m_pkthdr.len = m->m_len = 1424 4 * sizeof(u_int16_t) + IEEE80211_CHALLENGE_LEN; 1425 if (arg == IEEE80211_AUTH_SHARED_RESPONSE) { 1426 IEEE80211_DPRINTF(ic, IEEE80211_MSG_AUTH, 1427 "[%s] request encrypt frame (%s)\n", 1428 ether_sprintf(ni->ni_macaddr), __func__); 1429 m->m_flags |= M_LINK0; /* WEP-encrypt, please */ 1430 } 1431 } else 1432 m->m_pkthdr.len = m->m_len = 3 * sizeof(u_int16_t); 1433 1434 /* XXX not right for shared key */ 1435 if (status == IEEE80211_STATUS_SUCCESS) 1436 IEEE80211_NODE_STAT(ni, tx_auth); 1437 else 1438 IEEE80211_NODE_STAT(ni, tx_auth_fail); 1439 1440 if (ic->ic_opmode == IEEE80211_M_STA) 1441 timer = IEEE80211_TRANS_WAIT; 1442 break; 1443 1444 case IEEE80211_FC0_SUBTYPE_DEAUTH: 1445 IEEE80211_DPRINTF(ic, IEEE80211_MSG_AUTH, 1446 "[%s] send station deauthenticate (reason %d)\n", 1447 ether_sprintf(ni->ni_macaddr), arg); 1448 m = ieee80211_getmgtframe(&frm, sizeof(u_int16_t)); 1449 if (m == NULL) 1450 senderr(ENOMEM, is_tx_nobuf); 1451 *(u_int16_t *)frm = htole16(arg); /* reason */ 1452 m->m_pkthdr.len = m->m_len = sizeof(u_int16_t); 1453 1454 IEEE80211_NODE_STAT(ni, tx_deauth); 1455 IEEE80211_NODE_STAT_SET(ni, tx_deauth_code, arg); 1456 1457 ieee80211_node_unauthorize(ni); /* port closed */ 1458 break; 1459 1460 case IEEE80211_FC0_SUBTYPE_ASSOC_REQ: 1461 case IEEE80211_FC0_SUBTYPE_REASSOC_REQ: 1462 /* 1463 * asreq frame format 1464 * [2] capability information 1465 * [2] listen interval 1466 * [6*] current AP address (reassoc only) 1467 * [tlv] ssid 1468 * [tlv] supported rates 1469 * [tlv] extended supported rates 1470 * [tlv] WME 1471 * [tlv] user-specified ie's 1472 */ 1473 m = ieee80211_getmgtframe(&frm, 1474 sizeof(u_int16_t) 1475 + sizeof(u_int16_t) 1476 + IEEE80211_ADDR_LEN 1477 + 2 + IEEE80211_NWID_LEN 1478 + 2 + IEEE80211_RATE_SIZE 1479 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 1480 + sizeof(struct ieee80211_wme_info) 1481 + (ic->ic_opt_ie != NULL ? ic->ic_opt_ie_len : 0) 1482 ); 1483 if (m == NULL) 1484 senderr(ENOMEM, is_tx_nobuf); 1485 1486 capinfo = 0; 1487 if (ic->ic_opmode == IEEE80211_M_IBSS) 1488 capinfo |= IEEE80211_CAPINFO_IBSS; 1489 else /* IEEE80211_M_STA */ 1490 capinfo |= IEEE80211_CAPINFO_ESS; 1491 if (ic->ic_flags & IEEE80211_F_PRIVACY) 1492 capinfo |= IEEE80211_CAPINFO_PRIVACY; 1493 /* 1494 * NB: Some 11a AP's reject the request when 1495 * short premable is set. 1496 */ 1497 if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && 1498 IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) 1499 capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; 1500 if ((ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME) && 1501 (ic->ic_caps & IEEE80211_C_SHSLOT)) 1502 capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; 1503 *(u_int16_t *)frm = htole16(capinfo); 1504 frm += 2; 1505 1506 *(u_int16_t *)frm = htole16(ic->ic_lintval); 1507 frm += 2; 1508 1509 if (type == IEEE80211_FC0_SUBTYPE_REASSOC_REQ) { 1510 IEEE80211_ADDR_COPY(frm, ic->ic_bss->ni_bssid); 1511 frm += IEEE80211_ADDR_LEN; 1512 } 1513 1514 frm = ieee80211_add_ssid(frm, ni->ni_essid, ni->ni_esslen); 1515 frm = ieee80211_add_rates(frm, &ni->ni_rates); 1516 frm = ieee80211_add_xrates(frm, &ni->ni_rates); 1517 if ((ic->ic_flags & IEEE80211_F_WME) && ni->ni_wme_ie != NULL) 1518 frm = ieee80211_add_wme_info(frm, &ic->ic_wme); 1519 if (ic->ic_opt_ie != NULL) { 1520 memcpy(frm, ic->ic_opt_ie, ic->ic_opt_ie_len); 1521 frm += ic->ic_opt_ie_len; 1522 } 1523 m->m_pkthdr.len = m->m_len = frm - mtod(m, u_int8_t *); 1524 1525 timer = IEEE80211_TRANS_WAIT; 1526 break; 1527 1528 case IEEE80211_FC0_SUBTYPE_ASSOC_RESP: 1529 case IEEE80211_FC0_SUBTYPE_REASSOC_RESP: 1530 /* 1531 * asreq frame format 1532 * [2] capability information 1533 * [2] status 1534 * [2] association ID 1535 * [tlv] supported rates 1536 * [tlv] extended supported rates 1537 * [tlv] WME (if enabled and STA enabled) 1538 */ 1539 m = ieee80211_getmgtframe(&frm, 1540 sizeof(u_int16_t) 1541 + sizeof(u_int16_t) 1542 + sizeof(u_int16_t) 1543 + 2 + IEEE80211_RATE_SIZE 1544 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 1545 + sizeof(struct ieee80211_wme_param) 1546 ); 1547 if (m == NULL) 1548 senderr(ENOMEM, is_tx_nobuf); 1549 1550 capinfo = IEEE80211_CAPINFO_ESS; 1551 if (ic->ic_flags & IEEE80211_F_PRIVACY) 1552 capinfo |= IEEE80211_CAPINFO_PRIVACY; 1553 if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && 1554 IEEE80211_IS_CHAN_2GHZ(ic->ic_curchan)) 1555 capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; 1556 if (ic->ic_flags & IEEE80211_F_SHSLOT) 1557 capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; 1558 *(u_int16_t *)frm = htole16(capinfo); 1559 frm += 2; 1560 1561 *(u_int16_t *)frm = htole16(arg); /* status */ 1562 frm += 2; 1563 1564 if (arg == IEEE80211_STATUS_SUCCESS) { 1565 *(u_int16_t *)frm = htole16(ni->ni_associd); 1566 IEEE80211_NODE_STAT(ni, tx_assoc); 1567 } else 1568 IEEE80211_NODE_STAT(ni, tx_assoc_fail); 1569 frm += 2; 1570 1571 frm = ieee80211_add_rates(frm, &ni->ni_rates); 1572 frm = ieee80211_add_xrates(frm, &ni->ni_rates); 1573 if ((ic->ic_flags & IEEE80211_F_WME) && ni->ni_wme_ie != NULL) 1574 frm = ieee80211_add_wme_param(frm, &ic->ic_wme); 1575 m->m_pkthdr.len = m->m_len = frm - mtod(m, u_int8_t *); 1576 break; 1577 1578 case IEEE80211_FC0_SUBTYPE_DISASSOC: 1579 IEEE80211_DPRINTF(ic, IEEE80211_MSG_ASSOC, 1580 "[%s] send station disassociate (reason %d)\n", 1581 ether_sprintf(ni->ni_macaddr), arg); 1582 m = ieee80211_getmgtframe(&frm, sizeof(u_int16_t)); 1583 if (m == NULL) 1584 senderr(ENOMEM, is_tx_nobuf); 1585 *(u_int16_t *)frm = htole16(arg); /* reason */ 1586 m->m_pkthdr.len = m->m_len = sizeof(u_int16_t); 1587 1588 IEEE80211_NODE_STAT(ni, tx_disassoc); 1589 IEEE80211_NODE_STAT_SET(ni, tx_disassoc_code, arg); 1590 break; 1591 1592 default: 1593 IEEE80211_DPRINTF(ic, IEEE80211_MSG_ANY, 1594 "[%s] invalid mgmt frame type %u\n", 1595 ether_sprintf(ni->ni_macaddr), type); 1596 senderr(EINVAL, is_tx_unknownmgt); 1597 /* NOTREACHED */ 1598 } 1599 ret = ieee80211_mgmt_output(ic, ni, m, type, timer); 1600 if (ret != 0) { 1601 bad: 1602 ieee80211_free_node(ni); 1603 } 1604 return ret; 1605 #undef senderr 1606 } 1607 1608 /* 1609 * Allocate a beacon frame and fillin the appropriate bits. 1610 */ 1611 struct mbuf * 1612 ieee80211_beacon_alloc(struct ieee80211com *ic, struct ieee80211_node *ni, 1613 struct ieee80211_beacon_offsets *bo) 1614 { 1615 struct ifnet *ifp = ic->ic_ifp; 1616 struct ieee80211_frame *wh; 1617 struct mbuf *m; 1618 int pktlen; 1619 u_int8_t *frm, *efrm; 1620 u_int16_t capinfo; 1621 struct ieee80211_rateset *rs; 1622 1623 /* 1624 * beacon frame format 1625 * [8] time stamp 1626 * [2] beacon interval 1627 * [2] cabability information 1628 * [tlv] ssid 1629 * [tlv] supported rates 1630 * [3] parameter set (DS) 1631 * [tlv] parameter set (IBSS/TIM) 1632 * [tlv] extended rate phy (ERP) 1633 * [tlv] extended supported rates 1634 * [tlv] WME parameters 1635 * [tlv] WPA/RSN parameters 1636 * XXX Vendor-specific OIDs (e.g. Atheros) 1637 * NB: we allocate the max space required for the TIM bitmap. 1638 */ 1639 rs = &ni->ni_rates; 1640 pktlen = 8 /* time stamp */ 1641 + sizeof(u_int16_t) /* beacon interval */ 1642 + sizeof(u_int16_t) /* capabilities */ 1643 + 2 + ni->ni_esslen /* ssid */ 1644 + 2 + IEEE80211_RATE_SIZE /* supported rates */ 1645 + 2 + 1 /* DS parameters */ 1646 + 2 + 4 + ic->ic_tim_len /* DTIM/IBSSPARMS */ 1647 + 2 + 1 /* ERP */ 1648 + 2 + (IEEE80211_RATE_MAXSIZE - IEEE80211_RATE_SIZE) 1649 + (ic->ic_caps & IEEE80211_C_WME ? /* WME */ 1650 sizeof(struct ieee80211_wme_param) : 0) 1651 + (ic->ic_caps & IEEE80211_C_WPA ? /* WPA 1+2 */ 1652 2*sizeof(struct ieee80211_ie_wpa) : 0) 1653 ; 1654 m = ieee80211_getmgtframe(&frm, pktlen); 1655 if (m == NULL) { 1656 IEEE80211_DPRINTF(ic, IEEE80211_MSG_ANY, 1657 "%s: cannot get buf; size %u\n", __func__, pktlen); 1658 ic->ic_stats.is_tx_nobuf++; 1659 return NULL; 1660 } 1661 1662 memset(frm, 0, 8); /* XXX timestamp is set by hardware/driver */ 1663 frm += 8; 1664 *(u_int16_t *)frm = htole16(ni->ni_intval); 1665 frm += 2; 1666 if (ic->ic_opmode == IEEE80211_M_IBSS) 1667 capinfo = IEEE80211_CAPINFO_IBSS; 1668 else 1669 capinfo = IEEE80211_CAPINFO_ESS; 1670 if (ic->ic_flags & IEEE80211_F_PRIVACY) 1671 capinfo |= IEEE80211_CAPINFO_PRIVACY; 1672 if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && 1673 IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) 1674 capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; 1675 if (ic->ic_flags & IEEE80211_F_SHSLOT) 1676 capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; 1677 bo->bo_caps = (u_int16_t *)frm; 1678 *(u_int16_t *)frm = htole16(capinfo); 1679 frm += 2; 1680 *frm++ = IEEE80211_ELEMID_SSID; 1681 if ((ic->ic_flags & IEEE80211_F_HIDESSID) == 0) { 1682 *frm++ = ni->ni_esslen; 1683 memcpy(frm, ni->ni_essid, ni->ni_esslen); 1684 frm += ni->ni_esslen; 1685 } else 1686 *frm++ = 0; 1687 frm = ieee80211_add_rates(frm, rs); 1688 if (ic->ic_curmode != IEEE80211_MODE_FH) { 1689 *frm++ = IEEE80211_ELEMID_DSPARMS; 1690 *frm++ = 1; 1691 *frm++ = ieee80211_chan2ieee(ic, ni->ni_chan); 1692 } 1693 bo->bo_tim = frm; 1694 if (ic->ic_opmode == IEEE80211_M_IBSS) { 1695 *frm++ = IEEE80211_ELEMID_IBSSPARMS; 1696 *frm++ = 2; 1697 *frm++ = 0; *frm++ = 0; /* TODO: ATIM window */ 1698 bo->bo_tim_len = 0; 1699 } else { 1700 struct ieee80211_tim_ie *tie = (struct ieee80211_tim_ie *) frm; 1701 1702 tie->tim_ie = IEEE80211_ELEMID_TIM; 1703 tie->tim_len = 4; /* length */ 1704 tie->tim_count = 0; /* DTIM count */ 1705 tie->tim_period = ic->ic_dtim_period; /* DTIM period */ 1706 tie->tim_bitctl = 0; /* bitmap control */ 1707 tie->tim_bitmap[0] = 0; /* Partial Virtual Bitmap */ 1708 frm += sizeof(struct ieee80211_tim_ie); 1709 bo->bo_tim_len = 1; 1710 } 1711 bo->bo_trailer = frm; 1712 if (ic->ic_flags & IEEE80211_F_WME) { 1713 bo->bo_wme = frm; 1714 frm = ieee80211_add_wme_param(frm, &ic->ic_wme); 1715 ic->ic_flags &= ~IEEE80211_F_WMEUPDATE; 1716 } 1717 if (ic->ic_flags & IEEE80211_F_WPA) 1718 frm = ieee80211_add_wpa(frm, ic); 1719 if (ic->ic_curmode == IEEE80211_MODE_11G) 1720 frm = ieee80211_add_erp(frm, ic); 1721 efrm = ieee80211_add_xrates(frm, rs); 1722 bo->bo_trailer_len = efrm - bo->bo_trailer; 1723 m->m_pkthdr.len = m->m_len = efrm - mtod(m, u_int8_t *); 1724 1725 M_PREPEND(m, sizeof(struct ieee80211_frame), M_DONTWAIT); 1726 IASSERT(m != NULL, ("no space for 802.11 header?")); 1727 wh = mtod(m, struct ieee80211_frame *); 1728 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | 1729 IEEE80211_FC0_SUBTYPE_BEACON; 1730 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 1731 *(u_int16_t *)wh->i_dur = 0; 1732 IEEE80211_ADDR_COPY(wh->i_addr1, ifp->if_broadcastaddr); 1733 IEEE80211_ADDR_COPY(wh->i_addr2, ic->ic_myaddr); 1734 IEEE80211_ADDR_COPY(wh->i_addr3, ni->ni_bssid); 1735 *(u_int16_t *)wh->i_seq = 0; 1736 1737 return m; 1738 } 1739 1740 /* 1741 * Update the dynamic parts of a beacon frame based on the current state. 1742 */ 1743 int 1744 ieee80211_beacon_update(struct ieee80211com *ic, struct ieee80211_node *ni, 1745 struct ieee80211_beacon_offsets *bo, struct mbuf *m __unused, int mcast) 1746 { 1747 int len_changed = 0; 1748 u_int16_t capinfo; 1749 1750 IEEE80211_BEACON_LOCK(ic); 1751 /* XXX faster to recalculate entirely or just changes? */ 1752 if (ic->ic_opmode == IEEE80211_M_IBSS) 1753 capinfo = IEEE80211_CAPINFO_IBSS; 1754 else 1755 capinfo = IEEE80211_CAPINFO_ESS; 1756 if (ic->ic_flags & IEEE80211_F_PRIVACY) 1757 capinfo |= IEEE80211_CAPINFO_PRIVACY; 1758 if ((ic->ic_flags & IEEE80211_F_SHPREAMBLE) && 1759 IEEE80211_IS_CHAN_2GHZ(ni->ni_chan)) 1760 capinfo |= IEEE80211_CAPINFO_SHORT_PREAMBLE; 1761 if (ic->ic_flags & IEEE80211_F_SHSLOT) 1762 capinfo |= IEEE80211_CAPINFO_SHORT_SLOTTIME; 1763 *bo->bo_caps = htole16(capinfo); 1764 1765 if (ic->ic_flags & IEEE80211_F_WME) { 1766 struct ieee80211_wme_state *wme = &ic->ic_wme; 1767 1768 /* 1769 * Check for agressive mode change. When there is 1770 * significant high priority traffic in the BSS 1771 * throttle back BE traffic by using conservative 1772 * parameters. Otherwise BE uses agressive params 1773 * to optimize performance of legacy/non-QoS traffic. 1774 */ 1775 if (wme->wme_flags & WME_F_AGGRMODE) { 1776 if (wme->wme_hipri_traffic > 1777 wme->wme_hipri_switch_thresh) { 1778 IEEE80211_DPRINTF(ic, IEEE80211_MSG_WME, 1779 "%s: traffic %u, disable aggressive mode\n", 1780 __func__, wme->wme_hipri_traffic); 1781 wme->wme_flags &= ~WME_F_AGGRMODE; 1782 ieee80211_wme_updateparams_locked(ic); 1783 wme->wme_hipri_traffic = 1784 wme->wme_hipri_switch_hysteresis; 1785 } else 1786 wme->wme_hipri_traffic = 0; 1787 } else { 1788 if (wme->wme_hipri_traffic <= 1789 wme->wme_hipri_switch_thresh) { 1790 IEEE80211_DPRINTF(ic, IEEE80211_MSG_WME, 1791 "%s: traffic %u, enable aggressive mode\n", 1792 __func__, wme->wme_hipri_traffic); 1793 wme->wme_flags |= WME_F_AGGRMODE; 1794 ieee80211_wme_updateparams_locked(ic); 1795 wme->wme_hipri_traffic = 0; 1796 } else 1797 wme->wme_hipri_traffic = 1798 wme->wme_hipri_switch_hysteresis; 1799 } 1800 if (ic->ic_flags & IEEE80211_F_WMEUPDATE) { 1801 (void) ieee80211_add_wme_param(bo->bo_wme, wme); 1802 ic->ic_flags &= ~IEEE80211_F_WMEUPDATE; 1803 } 1804 } 1805 1806 #ifndef IEEE80211_NO_HOSTAP 1807 if (ic->ic_opmode == IEEE80211_M_HOSTAP) { /* NB: no IBSS support*/ 1808 struct ieee80211_tim_ie *tie = 1809 (struct ieee80211_tim_ie *) bo->bo_tim; 1810 if (ic->ic_flags & IEEE80211_F_TIMUPDATE) { 1811 u_int timlen, timoff, i; 1812 /* 1813 * ATIM/DTIM needs updating. If it fits in the 1814 * current space allocated then just copy in the 1815 * new bits. Otherwise we need to move any trailing 1816 * data to make room. Note that we know there is 1817 * contiguous space because ieee80211_beacon_allocate 1818 * insures there is space in the mbuf to write a 1819 * maximal-size virtual bitmap (based on ic_max_aid). 1820 */ 1821 /* 1822 * Calculate the bitmap size and offset, copy any 1823 * trailer out of the way, and then copy in the 1824 * new bitmap and update the information element. 1825 * Note that the tim bitmap must contain at least 1826 * one byte and any offset must be even. 1827 */ 1828 if (ic->ic_ps_pending != 0) { 1829 timoff = 128; /* impossibly large */ 1830 for (i = 0; i < ic->ic_tim_len; i++) 1831 if (ic->ic_tim_bitmap[i]) { 1832 timoff = i &~ 1; 1833 break; 1834 } 1835 IASSERT(timoff != 128, ("tim bitmap empty!")); 1836 for (i = ic->ic_tim_len-1; i >= timoff; i--) 1837 if (ic->ic_tim_bitmap[i]) 1838 break; 1839 timlen = 1 + (i - timoff); 1840 } else { 1841 timoff = 0; 1842 timlen = 1; 1843 } 1844 if (timlen != bo->bo_tim_len) { 1845 /* copy up/down trailer */ 1846 ovbcopy(bo->bo_trailer, tie->tim_bitmap+timlen, 1847 bo->bo_trailer_len); 1848 bo->bo_trailer = tie->tim_bitmap+timlen; 1849 bo->bo_wme = bo->bo_trailer; 1850 bo->bo_tim_len = timlen; 1851 1852 /* update information element */ 1853 tie->tim_len = 3 + timlen; 1854 tie->tim_bitctl = timoff; 1855 len_changed = 1; 1856 } 1857 memcpy(tie->tim_bitmap, ic->ic_tim_bitmap + timoff, 1858 bo->bo_tim_len); 1859 1860 ic->ic_flags &= ~IEEE80211_F_TIMUPDATE; 1861 1862 IEEE80211_DPRINTF(ic, IEEE80211_MSG_POWER, 1863 "%s: TIM updated, pending %u, off %u, len %u\n", 1864 __func__, ic->ic_ps_pending, timoff, timlen); 1865 } 1866 /* count down DTIM period */ 1867 if (tie->tim_count == 0) 1868 tie->tim_count = tie->tim_period - 1; 1869 else 1870 tie->tim_count--; 1871 /* update state for buffered multicast frames on DTIM */ 1872 if (mcast && (tie->tim_count == 1 || tie->tim_period == 1)) 1873 tie->tim_bitctl |= 1; 1874 else 1875 tie->tim_bitctl &= ~1; 1876 } 1877 #endif /* !IEEE80211_NO_HOSTAP */ 1878 IEEE80211_BEACON_UNLOCK(ic); 1879 1880 return len_changed; 1881 } 1882 1883 /* 1884 * Save an outbound packet for a node in power-save sleep state. 1885 * The new packet is placed on the node's saved queue, and the TIM 1886 * is changed, if necessary. 1887 */ 1888 void 1889 ieee80211_pwrsave(struct ieee80211com *ic, struct ieee80211_node *ni, 1890 struct mbuf *m) 1891 { 1892 int qlen, age; 1893 1894 IEEE80211_NODE_SAVEQ_LOCK(ni); 1895 if (IF_QFULL(&ni->ni_savedq)) { 1896 IF_DROP(&ni->ni_savedq); 1897 IEEE80211_NODE_SAVEQ_UNLOCK(ni); 1898 IEEE80211_DPRINTF(ic, IEEE80211_MSG_ANY, 1899 "[%s] pwr save q overflow, drops %d (size %d)\n", 1900 ether_sprintf(ni->ni_macaddr), 1901 ni->ni_savedq.ifq_drops, IEEE80211_PS_MAX_QUEUE); 1902 #ifdef IEEE80211_DEBUG 1903 if (ieee80211_msg_dumppkts(ic)) 1904 ieee80211_dump_pkt(mtod(m, caddr_t), m->m_len, -1, -1); 1905 #endif 1906 m_freem(m); 1907 return; 1908 } 1909 /* 1910 * Tag the frame with it's expiry time and insert 1911 * it in the queue. The aging interval is 4 times 1912 * the listen interval specified by the station. 1913 * Frames that sit around too long are reclaimed 1914 * using this information. 1915 */ 1916 /* XXX handle overflow? */ 1917 age = ((ni->ni_intval * ic->ic_bintval) << 2) / 1024; /* TU -> secs */ 1918 _IEEE80211_NODE_SAVEQ_ENQUEUE(ni, m, qlen, age); 1919 IEEE80211_NODE_SAVEQ_UNLOCK(ni); 1920 1921 IEEE80211_DPRINTF(ic, IEEE80211_MSG_POWER, 1922 "[%s] save frame with age %d, %u now queued\n", 1923 ether_sprintf(ni->ni_macaddr), age, qlen); 1924 1925 if (qlen == 1) 1926 ic->ic_set_tim(ni, 1); 1927 } 1928