1 /* $NetBSD: if_ether.h,v 1.34 2003/08/07 16:32:51 agc Exp $ */ 2 3 /* 4 * Copyright (c) 1982, 1986, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. Neither the name of the University nor the names of its contributors 16 * may be used to endorse or promote products derived from this software 17 * without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 * 31 * @(#)if_ether.h 8.1 (Berkeley) 6/10/93 32 */ 33 34 #ifndef _NET_IF_ETHER_H_ 35 #define _NET_IF_ETHER_H_ 36 37 #ifdef _KERNEL 38 #ifdef _KERNEL_OPT 39 #include "opt_mbuftrace.h" 40 #endif 41 #include <sys/mbuf.h> 42 #endif 43 44 /* 45 * Some basic Ethernet constants. 46 */ 47 #define ETHER_ADDR_LEN 6 /* length of an Ethernet address */ 48 #define ETHER_TYPE_LEN 2 /* length of the Ethernet type field */ 49 #define ETHER_CRC_LEN 4 /* length of the Ethernet CRC */ 50 #define ETHER_HDR_LEN ((ETHER_ADDR_LEN * 2) + ETHER_TYPE_LEN) 51 #define ETHER_MIN_LEN 64 /* minimum frame length, including CRC */ 52 #define ETHER_MAX_LEN 1518 /* maximum frame length, including CRC */ 53 #define ETHER_MAX_LEN_JUMBO 9018 /* maximum jumbo frame len, including CRC */ 54 55 /* 56 * Some Ethernet extensions. 57 */ 58 #define ETHER_VLAN_ENCAP_LEN 4 /* length of 802.1Q VLAN encapsulation */ 59 60 /* 61 * Ethernet address - 6 octets 62 * this is only used by the ethers(3) functions. 63 */ 64 struct ether_addr { 65 u_int8_t ether_addr_octet[ETHER_ADDR_LEN]; 66 } __attribute__((__packed__)); 67 68 /* 69 * Structure of a 10Mb/s Ethernet header. 70 */ 71 struct ether_header { 72 u_int8_t ether_dhost[ETHER_ADDR_LEN]; 73 u_int8_t ether_shost[ETHER_ADDR_LEN]; 74 u_int16_t ether_type; 75 } __attribute__((__packed__)); 76 77 #include <net/ethertypes.h> 78 79 #define ETHER_IS_MULTICAST(addr) (*(addr) & 0x01) /* is address mcast/bcast? */ 80 81 #define ETHERMTU_JUMBO (ETHER_MAX_LEN_JUMBO - ETHER_HDR_LEN - ETHER_CRC_LEN) 82 #define ETHERMTU (ETHER_MAX_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN) 83 #define ETHERMIN (ETHER_MIN_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN) 84 85 /* 86 * Compute the maximum frame size based on ethertype (i.e. possible 87 * encapsulation) and whether or not an FCS is present. 88 */ 89 #define ETHER_MAX_FRAME(ifp, etype, hasfcs) \ 90 ((ifp)->if_mtu + ETHER_HDR_LEN + \ 91 ((hasfcs) ? ETHER_CRC_LEN : 0) + \ 92 (((etype) == ETHERTYPE_VLAN) ? ETHER_VLAN_ENCAP_LEN : 0)) 93 94 /* 95 * Ethernet CRC32 polynomials (big- and little-endian verions). 96 */ 97 #define ETHER_CRC_POLY_LE 0xedb88320 98 #define ETHER_CRC_POLY_BE 0x04c11db6 99 100 #ifndef _STANDALONE 101 102 /* 103 * Ethernet-specific mbuf flags. 104 */ 105 #define M_HASFCS M_LINK0 /* FCS included at end of frame */ 106 #define M_PROMISC M_LINK1 /* this packet is not for us */ 107 108 #ifdef _KERNEL 109 /* 110 * Macro to map an IP multicast address to an Ethernet multicast address. 111 * The high-order 25 bits of the Ethernet address are statically assigned, 112 * and the low-order 23 bits are taken from the low end of the IP address. 113 */ 114 #define ETHER_MAP_IP_MULTICAST(ipaddr, enaddr) \ 115 /* struct in_addr *ipaddr; */ \ 116 /* u_int8_t enaddr[ETHER_ADDR_LEN]; */ \ 117 { \ 118 (enaddr)[0] = 0x01; \ 119 (enaddr)[1] = 0x00; \ 120 (enaddr)[2] = 0x5e; \ 121 (enaddr)[3] = ((u_int8_t *)ipaddr)[1] & 0x7f; \ 122 (enaddr)[4] = ((u_int8_t *)ipaddr)[2]; \ 123 (enaddr)[5] = ((u_int8_t *)ipaddr)[3]; \ 124 } 125 /* 126 * Macro to map an IP6 multicast address to an Ethernet multicast address. 127 * The high-order 16 bits of the Ethernet address are statically assigned, 128 * and the low-order 32 bits are taken from the low end of the IP6 address. 129 */ 130 #define ETHER_MAP_IPV6_MULTICAST(ip6addr, enaddr) \ 131 /* struct in6_addr *ip6addr; */ \ 132 /* u_int8_t enaddr[ETHER_ADDR_LEN]; */ \ 133 { \ 134 (enaddr)[0] = 0x33; \ 135 (enaddr)[1] = 0x33; \ 136 (enaddr)[2] = ((u_int8_t *)ip6addr)[12]; \ 137 (enaddr)[3] = ((u_int8_t *)ip6addr)[13]; \ 138 (enaddr)[4] = ((u_int8_t *)ip6addr)[14]; \ 139 (enaddr)[5] = ((u_int8_t *)ip6addr)[15]; \ 140 } 141 #endif 142 143 /* 144 * Structure shared between the ethernet driver modules and 145 * the multicast list code. For example, each ec_softc or il_softc 146 * begins with this structure. 147 */ 148 struct ethercom { 149 struct ifnet ec_if; /* network-visible interface */ 150 LIST_HEAD(, ether_multi) ec_multiaddrs; /* list of ether multicast 151 addrs */ 152 int ec_multicnt; /* length of ec_multiaddrs 153 list */ 154 int ec_capabilities; /* capabilities, provided by 155 driver */ 156 int ec_capenable; /* tells hardware which 157 capabilities to enable */ 158 159 int ec_nvlans; /* # VLANs on this interface */ 160 #ifdef MBUFTRACE 161 struct mowner ec_rx_mowner; /* mbufs received */ 162 struct mowner ec_tx_mowner; /* mbufs transmitted */ 163 #endif 164 }; 165 166 #define ETHERCAP_VLAN_MTU 0x00000001 /* VLAN-compatible MTU */ 167 #define ETHERCAP_VLAN_HWTAGGING 0x00000002 /* hardware VLAN tag support */ 168 #define ETHERCAP_JUMBO_MTU 0x00000004 /* 9000 byte MTU supported */ 169 170 #ifdef _KERNEL 171 extern u_int8_t etherbroadcastaddr[ETHER_ADDR_LEN]; 172 extern u_int8_t ether_ipmulticast_min[ETHER_ADDR_LEN]; 173 extern u_int8_t ether_ipmulticast_max[ETHER_ADDR_LEN]; 174 175 int ether_ioctl(struct ifnet *, u_long, caddr_t); 176 int ether_addmulti (struct ifreq *, struct ethercom *); 177 int ether_delmulti (struct ifreq *, struct ethercom *); 178 int ether_changeaddr (struct ifreq *, struct ethercom *); 179 int ether_multiaddr(struct sockaddr *, u_int8_t[], u_int8_t[]); 180 #endif /* _KERNEL */ 181 182 /* 183 * Ethernet multicast address structure. There is one of these for each 184 * multicast address or range of multicast addresses that we are supposed 185 * to listen to on a particular interface. They are kept in a linked list, 186 * rooted in the interface's ethercom structure. 187 */ 188 struct ether_multi { 189 u_int8_t enm_addrlo[ETHER_ADDR_LEN]; /* low or only address of range */ 190 u_int8_t enm_addrhi[ETHER_ADDR_LEN]; /* high or only address of range */ 191 struct ethercom *enm_ec; /* back pointer to ethercom */ 192 u_int enm_refcount; /* no. claims to this addr/range */ 193 LIST_ENTRY(ether_multi) enm_list; 194 }; 195 196 /* 197 * Structure used by macros below to remember position when stepping through 198 * all of the ether_multi records. 199 */ 200 struct ether_multistep { 201 struct ether_multi *e_enm; 202 }; 203 204 /* 205 * Macro for looking up the ether_multi record for a given range of Ethernet 206 * multicast addresses connected to a given ethercom structure. If no matching 207 * record is found, "enm" returns NULL. 208 */ 209 #define ETHER_LOOKUP_MULTI(addrlo, addrhi, ec, enm) \ 210 /* u_int8_t addrlo[ETHER_ADDR_LEN]; */ \ 211 /* u_int8_t addrhi[ETHER_ADDR_LEN]; */ \ 212 /* struct ethercom *ec; */ \ 213 /* struct ether_multi *enm; */ \ 214 { \ 215 for ((enm) = LIST_FIRST(&(ec)->ec_multiaddrs); \ 216 (enm) != NULL && \ 217 (bcmp((enm)->enm_addrlo, (addrlo), ETHER_ADDR_LEN) != 0 || \ 218 bcmp((enm)->enm_addrhi, (addrhi), ETHER_ADDR_LEN) != 0); \ 219 (enm) = LIST_NEXT((enm), enm_list)); \ 220 } 221 222 /* 223 * Macro to step through all of the ether_multi records, one at a time. 224 * The current position is remembered in "step", which the caller must 225 * provide. ETHER_FIRST_MULTI(), below, must be called to initialize "step" 226 * and get the first record. Both macros return a NULL "enm" when there 227 * are no remaining records. 228 */ 229 #define ETHER_NEXT_MULTI(step, enm) \ 230 /* struct ether_multistep step; */ \ 231 /* struct ether_multi *enm; */ \ 232 { \ 233 if (((enm) = (step).e_enm) != NULL) \ 234 (step).e_enm = LIST_NEXT((enm), enm_list); \ 235 } 236 237 #define ETHER_FIRST_MULTI(step, ec, enm) \ 238 /* struct ether_multistep step; */ \ 239 /* struct ethercom *ec; */ \ 240 /* struct ether_multi *enm; */ \ 241 { \ 242 (step).e_enm = LIST_FIRST(&(ec)->ec_multiaddrs); \ 243 ETHER_NEXT_MULTI((step), (enm)); \ 244 } 245 246 #ifdef _KERNEL 247 void ether_ifattach(struct ifnet *, const u_int8_t *); 248 void ether_ifdetach(struct ifnet *); 249 250 char *ether_sprintf(const u_int8_t *); 251 252 u_int32_t ether_crc32_le(const u_int8_t *, size_t); 253 u_int32_t ether_crc32_be(const u_int8_t *, size_t); 254 255 #else 256 /* 257 * Prototype ethers(3) functions. 258 */ 259 #include <sys/cdefs.h> 260 __BEGIN_DECLS 261 char * ether_ntoa __P((const struct ether_addr *)); 262 struct ether_addr * 263 ether_aton __P((const char *)); 264 int ether_ntohost __P((char *, const struct ether_addr *)); 265 int ether_hostton __P((const char *, struct ether_addr *)); 266 int ether_line __P((const char *, struct ether_addr *, char *)); 267 __END_DECLS 268 #endif 269 270 #endif /* _STANDALONE */ 271 272 #endif /* _NET_IF_ETHER_H_ */ 273