1 /* $NetBSD: libfdt.h,v 1.1.1.3 2019/12/22 12:30:38 skrll Exp $ */ 2 3 /* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) */ 4 #ifndef LIBFDT_H 5 #define LIBFDT_H 6 /* 7 * libfdt - Flat Device Tree manipulation 8 * Copyright (C) 2006 David Gibson, IBM Corporation. 9 */ 10 11 #include <libfdt_env.h> 12 #include <fdt.h> 13 14 #define FDT_FIRST_SUPPORTED_VERSION 0x02 15 #define FDT_LAST_SUPPORTED_VERSION 0x11 16 17 /* Error codes: informative error codes */ 18 #define FDT_ERR_NOTFOUND 1 19 /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ 20 #define FDT_ERR_EXISTS 2 21 /* FDT_ERR_EXISTS: Attempted to create a node or property which 22 * already exists */ 23 #define FDT_ERR_NOSPACE 3 24 /* FDT_ERR_NOSPACE: Operation needed to expand the device 25 * tree, but its buffer did not have sufficient space to 26 * contain the expanded tree. Use fdt_open_into() to move the 27 * device tree to a buffer with more space. */ 28 29 /* Error codes: codes for bad parameters */ 30 #define FDT_ERR_BADOFFSET 4 31 /* FDT_ERR_BADOFFSET: Function was passed a structure block 32 * offset which is out-of-bounds, or which points to an 33 * unsuitable part of the structure for the operation. */ 34 #define FDT_ERR_BADPATH 5 35 /* FDT_ERR_BADPATH: Function was passed a badly formatted path 36 * (e.g. missing a leading / for a function which requires an 37 * absolute path) */ 38 #define FDT_ERR_BADPHANDLE 6 39 /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle. 40 * This can be caused either by an invalid phandle property 41 * length, or the phandle value was either 0 or -1, which are 42 * not permitted. */ 43 #define FDT_ERR_BADSTATE 7 44 /* FDT_ERR_BADSTATE: Function was passed an incomplete device 45 * tree created by the sequential-write functions, which is 46 * not sufficiently complete for the requested operation. */ 47 48 /* Error codes: codes for bad device tree blobs */ 49 #define FDT_ERR_TRUNCATED 8 50 /* FDT_ERR_TRUNCATED: FDT or a sub-block is improperly 51 * terminated (overflows, goes outside allowed bounds, or 52 * isn't properly terminated). */ 53 #define FDT_ERR_BADMAGIC 9 54 /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a 55 * device tree at all - it is missing the flattened device 56 * tree magic number. */ 57 #define FDT_ERR_BADVERSION 10 58 /* FDT_ERR_BADVERSION: Given device tree has a version which 59 * can't be handled by the requested operation. For 60 * read-write functions, this may mean that fdt_open_into() is 61 * required to convert the tree to the expected version. */ 62 #define FDT_ERR_BADSTRUCTURE 11 63 /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt 64 * structure block or other serious error (e.g. misnested 65 * nodes, or subnodes preceding properties). */ 66 #define FDT_ERR_BADLAYOUT 12 67 /* FDT_ERR_BADLAYOUT: For read-write functions, the given 68 * device tree has it's sub-blocks in an order that the 69 * function can't handle (memory reserve map, then structure, 70 * then strings). Use fdt_open_into() to reorganize the tree 71 * into a form suitable for the read-write operations. */ 72 73 /* "Can't happen" error indicating a bug in libfdt */ 74 #define FDT_ERR_INTERNAL 13 75 /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. 76 * Should never be returned, if it is, it indicates a bug in 77 * libfdt itself. */ 78 79 /* Errors in device tree content */ 80 #define FDT_ERR_BADNCELLS 14 81 /* FDT_ERR_BADNCELLS: Device tree has a #address-cells, #size-cells 82 * or similar property with a bad format or value */ 83 84 #define FDT_ERR_BADVALUE 15 85 /* FDT_ERR_BADVALUE: Device tree has a property with an unexpected 86 * value. For example: a property expected to contain a string list 87 * is not NUL-terminated within the length of its value. */ 88 89 #define FDT_ERR_BADOVERLAY 16 90 /* FDT_ERR_BADOVERLAY: The device tree overlay, while 91 * correctly structured, cannot be applied due to some 92 * unexpected or missing value, property or node. */ 93 94 #define FDT_ERR_NOPHANDLES 17 95 /* FDT_ERR_NOPHANDLES: The device tree doesn't have any 96 * phandle available anymore without causing an overflow */ 97 98 #define FDT_ERR_BADFLAGS 18 99 /* FDT_ERR_BADFLAGS: The function was passed a flags field that 100 * contains invalid flags or an invalid combination of flags. */ 101 102 #define FDT_ERR_MAX 18 103 104 /* constants */ 105 #define FDT_MAX_PHANDLE 0xfffffffe 106 /* Valid values for phandles range from 1 to 2^32-2. */ 107 108 /**********************************************************************/ 109 /* Low-level functions (you probably don't need these) */ 110 /**********************************************************************/ 111 112 #ifndef SWIG /* This function is not useful in Python */ 113 const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen); 114 #endif 115 static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) 116 { 117 return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); 118 } 119 120 uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); 121 122 /* 123 * Alignment helpers: 124 * These helpers access words from a device tree blob. They're 125 * built to work even with unaligned pointers on platforms (ike 126 * ARM) that don't like unaligned loads and stores 127 */ 128 129 static inline uint32_t fdt32_ld(const fdt32_t *p) 130 { 131 const uint8_t *bp = (const uint8_t *)p; 132 133 return ((uint32_t)bp[0] << 24) 134 | ((uint32_t)bp[1] << 16) 135 | ((uint32_t)bp[2] << 8) 136 | bp[3]; 137 } 138 139 static inline void fdt32_st(void *property, uint32_t value) 140 { 141 uint8_t *bp = property; 142 143 bp[0] = value >> 24; 144 bp[1] = (value >> 16) & 0xff; 145 bp[2] = (value >> 8) & 0xff; 146 bp[3] = value & 0xff; 147 } 148 149 static inline uint64_t fdt64_ld(const fdt64_t *p) 150 { 151 const uint8_t *bp = (const uint8_t *)p; 152 153 return ((uint64_t)bp[0] << 56) 154 | ((uint64_t)bp[1] << 48) 155 | ((uint64_t)bp[2] << 40) 156 | ((uint64_t)bp[3] << 32) 157 | ((uint64_t)bp[4] << 24) 158 | ((uint64_t)bp[5] << 16) 159 | ((uint64_t)bp[6] << 8) 160 | bp[7]; 161 } 162 163 static inline void fdt64_st(void *property, uint64_t value) 164 { 165 uint8_t *bp = property; 166 167 bp[0] = value >> 56; 168 bp[1] = (value >> 48) & 0xff; 169 bp[2] = (value >> 40) & 0xff; 170 bp[3] = (value >> 32) & 0xff; 171 bp[4] = (value >> 24) & 0xff; 172 bp[5] = (value >> 16) & 0xff; 173 bp[6] = (value >> 8) & 0xff; 174 bp[7] = value & 0xff; 175 } 176 177 /**********************************************************************/ 178 /* Traversal functions */ 179 /**********************************************************************/ 180 181 int fdt_next_node(const void *fdt, int offset, int *depth); 182 183 /** 184 * fdt_first_subnode() - get offset of first direct subnode 185 * 186 * @fdt: FDT blob 187 * @offset: Offset of node to check 188 * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none 189 */ 190 int fdt_first_subnode(const void *fdt, int offset); 191 192 /** 193 * fdt_next_subnode() - get offset of next direct subnode 194 * 195 * After first calling fdt_first_subnode(), call this function repeatedly to 196 * get direct subnodes of a parent node. 197 * 198 * @fdt: FDT blob 199 * @offset: Offset of previous subnode 200 * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more 201 * subnodes 202 */ 203 int fdt_next_subnode(const void *fdt, int offset); 204 205 /** 206 * fdt_for_each_subnode - iterate over all subnodes of a parent 207 * 208 * @node: child node (int, lvalue) 209 * @fdt: FDT blob (const void *) 210 * @parent: parent node (int) 211 * 212 * This is actually a wrapper around a for loop and would be used like so: 213 * 214 * fdt_for_each_subnode(node, fdt, parent) { 215 * Use node 216 * ... 217 * } 218 * 219 * if ((node < 0) && (node != -FDT_ERR_NOTFOUND)) { 220 * Error handling 221 * } 222 * 223 * Note that this is implemented as a macro and @node is used as 224 * iterator in the loop. The parent variable be constant or even a 225 * literal. 226 * 227 */ 228 #define fdt_for_each_subnode(node, fdt, parent) \ 229 for (node = fdt_first_subnode(fdt, parent); \ 230 node >= 0; \ 231 node = fdt_next_subnode(fdt, node)) 232 233 /**********************************************************************/ 234 /* General functions */ 235 /**********************************************************************/ 236 #define fdt_get_header(fdt, field) \ 237 (fdt32_ld(&((const struct fdt_header *)(fdt))->field)) 238 #define fdt_magic(fdt) (fdt_get_header(fdt, magic)) 239 #define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) 240 #define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) 241 #define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) 242 #define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) 243 #define fdt_version(fdt) (fdt_get_header(fdt, version)) 244 #define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) 245 #define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) 246 #define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) 247 #define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) 248 249 #define fdt_set_hdr_(name) \ 250 static inline void fdt_set_##name(void *fdt, uint32_t val) \ 251 { \ 252 struct fdt_header *fdth = (struct fdt_header *)fdt; \ 253 fdth->name = cpu_to_fdt32(val); \ 254 } 255 fdt_set_hdr_(magic); 256 fdt_set_hdr_(totalsize); 257 fdt_set_hdr_(off_dt_struct); 258 fdt_set_hdr_(off_dt_strings); 259 fdt_set_hdr_(off_mem_rsvmap); 260 fdt_set_hdr_(version); 261 fdt_set_hdr_(last_comp_version); 262 fdt_set_hdr_(boot_cpuid_phys); 263 fdt_set_hdr_(size_dt_strings); 264 fdt_set_hdr_(size_dt_struct); 265 #undef fdt_set_hdr_ 266 267 /** 268 * fdt_header_size - return the size of the tree's header 269 * @fdt: pointer to a flattened device tree 270 */ 271 size_t fdt_header_size_(uint32_t version); 272 static inline size_t fdt_header_size(const void *fdt) 273 { 274 return fdt_header_size_(fdt_version(fdt)); 275 } 276 277 /** 278 * fdt_check_header - sanity check a device tree header 279 280 * @fdt: pointer to data which might be a flattened device tree 281 * 282 * fdt_check_header() checks that the given buffer contains what 283 * appears to be a flattened device tree, and that the header contains 284 * valid information (to the extent that can be determined from the 285 * header alone). 286 * 287 * returns: 288 * 0, if the buffer appears to contain a valid device tree 289 * -FDT_ERR_BADMAGIC, 290 * -FDT_ERR_BADVERSION, 291 * -FDT_ERR_BADSTATE, 292 * -FDT_ERR_TRUNCATED, standard meanings, as above 293 */ 294 int fdt_check_header(const void *fdt); 295 296 /** 297 * fdt_move - move a device tree around in memory 298 * @fdt: pointer to the device tree to move 299 * @buf: pointer to memory where the device is to be moved 300 * @bufsize: size of the memory space at buf 301 * 302 * fdt_move() relocates, if possible, the device tree blob located at 303 * fdt to the buffer at buf of size bufsize. The buffer may overlap 304 * with the existing device tree blob at fdt. Therefore, 305 * fdt_move(fdt, fdt, fdt_totalsize(fdt)) 306 * should always succeed. 307 * 308 * returns: 309 * 0, on success 310 * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree 311 * -FDT_ERR_BADMAGIC, 312 * -FDT_ERR_BADVERSION, 313 * -FDT_ERR_BADSTATE, standard meanings 314 */ 315 int fdt_move(const void *fdt, void *buf, int bufsize); 316 317 /**********************************************************************/ 318 /* Read-only functions */ 319 /**********************************************************************/ 320 321 int fdt_check_full(const void *fdt, size_t bufsize); 322 323 /** 324 * fdt_get_string - retrieve a string from the strings block of a device tree 325 * @fdt: pointer to the device tree blob 326 * @stroffset: offset of the string within the strings block (native endian) 327 * @lenp: optional pointer to return the string's length 328 * 329 * fdt_get_string() retrieves a pointer to a single string from the 330 * strings block of the device tree blob at fdt, and optionally also 331 * returns the string's length in *lenp. 332 * 333 * returns: 334 * a pointer to the string, on success 335 * NULL, if stroffset is out of bounds, or doesn't point to a valid string 336 */ 337 const char *fdt_get_string(const void *fdt, int stroffset, int *lenp); 338 339 /** 340 * fdt_string - retrieve a string from the strings block of a device tree 341 * @fdt: pointer to the device tree blob 342 * @stroffset: offset of the string within the strings block (native endian) 343 * 344 * fdt_string() retrieves a pointer to a single string from the 345 * strings block of the device tree blob at fdt. 346 * 347 * returns: 348 * a pointer to the string, on success 349 * NULL, if stroffset is out of bounds, or doesn't point to a valid string 350 */ 351 const char *fdt_string(const void *fdt, int stroffset); 352 353 /** 354 * fdt_find_max_phandle - find and return the highest phandle in a tree 355 * @fdt: pointer to the device tree blob 356 * @phandle: return location for the highest phandle value found in the tree 357 * 358 * fdt_find_max_phandle() finds the highest phandle value in the given device 359 * tree. The value returned in @phandle is only valid if the function returns 360 * success. 361 * 362 * returns: 363 * 0 on success or a negative error code on failure 364 */ 365 int fdt_find_max_phandle(const void *fdt, uint32_t *phandle); 366 367 /** 368 * fdt_get_max_phandle - retrieves the highest phandle in a tree 369 * @fdt: pointer to the device tree blob 370 * 371 * fdt_get_max_phandle retrieves the highest phandle in the given 372 * device tree. This will ignore badly formatted phandles, or phandles 373 * with a value of 0 or -1. 374 * 375 * This function is deprecated in favour of fdt_find_max_phandle(). 376 * 377 * returns: 378 * the highest phandle on success 379 * 0, if no phandle was found in the device tree 380 * -1, if an error occurred 381 */ 382 static inline uint32_t fdt_get_max_phandle(const void *fdt) 383 { 384 uint32_t phandle; 385 int err; 386 387 err = fdt_find_max_phandle(fdt, &phandle); 388 if (err < 0) 389 return (uint32_t)-1; 390 391 return phandle; 392 } 393 394 /** 395 * fdt_generate_phandle - return a new, unused phandle for a device tree blob 396 * @fdt: pointer to the device tree blob 397 * @phandle: return location for the new phandle 398 * 399 * Walks the device tree blob and looks for the highest phandle value. On 400 * success, the new, unused phandle value (one higher than the previously 401 * highest phandle value in the device tree blob) will be returned in the 402 * @phandle parameter. 403 * 404 * Returns: 405 * 0 on success or a negative error-code on failure 406 */ 407 int fdt_generate_phandle(const void *fdt, uint32_t *phandle); 408 409 /** 410 * fdt_num_mem_rsv - retrieve the number of memory reserve map entries 411 * @fdt: pointer to the device tree blob 412 * 413 * Returns the number of entries in the device tree blob's memory 414 * reservation map. This does not include the terminating 0,0 entry 415 * or any other (0,0) entries reserved for expansion. 416 * 417 * returns: 418 * the number of entries 419 */ 420 int fdt_num_mem_rsv(const void *fdt); 421 422 /** 423 * fdt_get_mem_rsv - retrieve one memory reserve map entry 424 * @fdt: pointer to the device tree blob 425 * @address, @size: pointers to 64-bit variables 426 * 427 * On success, *address and *size will contain the address and size of 428 * the n-th reserve map entry from the device tree blob, in 429 * native-endian format. 430 * 431 * returns: 432 * 0, on success 433 * -FDT_ERR_BADMAGIC, 434 * -FDT_ERR_BADVERSION, 435 * -FDT_ERR_BADSTATE, standard meanings 436 */ 437 int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); 438 439 /** 440 * fdt_subnode_offset_namelen - find a subnode based on substring 441 * @fdt: pointer to the device tree blob 442 * @parentoffset: structure block offset of a node 443 * @name: name of the subnode to locate 444 * @namelen: number of characters of name to consider 445 * 446 * Identical to fdt_subnode_offset(), but only examine the first 447 * namelen characters of name for matching the subnode name. This is 448 * useful for finding subnodes based on a portion of a larger string, 449 * such as a full path. 450 */ 451 #ifndef SWIG /* Not available in Python */ 452 int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, 453 const char *name, int namelen); 454 #endif 455 /** 456 * fdt_subnode_offset - find a subnode of a given node 457 * @fdt: pointer to the device tree blob 458 * @parentoffset: structure block offset of a node 459 * @name: name of the subnode to locate 460 * 461 * fdt_subnode_offset() finds a subnode of the node at structure block 462 * offset parentoffset with the given name. name may include a unit 463 * address, in which case fdt_subnode_offset() will find the subnode 464 * with that unit address, or the unit address may be omitted, in 465 * which case fdt_subnode_offset() will find an arbitrary subnode 466 * whose name excluding unit address matches the given name. 467 * 468 * returns: 469 * structure block offset of the requested subnode (>=0), on success 470 * -FDT_ERR_NOTFOUND, if the requested subnode does not exist 471 * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE 472 * tag 473 * -FDT_ERR_BADMAGIC, 474 * -FDT_ERR_BADVERSION, 475 * -FDT_ERR_BADSTATE, 476 * -FDT_ERR_BADSTRUCTURE, 477 * -FDT_ERR_TRUNCATED, standard meanings. 478 */ 479 int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); 480 481 /** 482 * fdt_path_offset_namelen - find a tree node by its full path 483 * @fdt: pointer to the device tree blob 484 * @path: full path of the node to locate 485 * @namelen: number of characters of path to consider 486 * 487 * Identical to fdt_path_offset(), but only consider the first namelen 488 * characters of path as the path name. 489 */ 490 #ifndef SWIG /* Not available in Python */ 491 int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen); 492 #endif 493 494 /** 495 * fdt_path_offset - find a tree node by its full path 496 * @fdt: pointer to the device tree blob 497 * @path: full path of the node to locate 498 * 499 * fdt_path_offset() finds a node of a given path in the device tree. 500 * Each path component may omit the unit address portion, but the 501 * results of this are undefined if any such path component is 502 * ambiguous (that is if there are multiple nodes at the relevant 503 * level matching the given component, differentiated only by unit 504 * address). 505 * 506 * returns: 507 * structure block offset of the node with the requested path (>=0), on 508 * success 509 * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid 510 * -FDT_ERR_NOTFOUND, if the requested node does not exist 511 * -FDT_ERR_BADMAGIC, 512 * -FDT_ERR_BADVERSION, 513 * -FDT_ERR_BADSTATE, 514 * -FDT_ERR_BADSTRUCTURE, 515 * -FDT_ERR_TRUNCATED, standard meanings. 516 */ 517 int fdt_path_offset(const void *fdt, const char *path); 518 519 /** 520 * fdt_get_name - retrieve the name of a given node 521 * @fdt: pointer to the device tree blob 522 * @nodeoffset: structure block offset of the starting node 523 * @lenp: pointer to an integer variable (will be overwritten) or NULL 524 * 525 * fdt_get_name() retrieves the name (including unit address) of the 526 * device tree node at structure block offset nodeoffset. If lenp is 527 * non-NULL, the length of this name is also returned, in the integer 528 * pointed to by lenp. 529 * 530 * returns: 531 * pointer to the node's name, on success 532 * If lenp is non-NULL, *lenp contains the length of that name 533 * (>=0) 534 * NULL, on error 535 * if lenp is non-NULL *lenp contains an error code (<0): 536 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE 537 * tag 538 * -FDT_ERR_BADMAGIC, 539 * -FDT_ERR_BADVERSION, 540 * -FDT_ERR_BADSTATE, standard meanings 541 */ 542 const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); 543 544 /** 545 * fdt_first_property_offset - find the offset of a node's first property 546 * @fdt: pointer to the device tree blob 547 * @nodeoffset: structure block offset of a node 548 * 549 * fdt_first_property_offset() finds the first property of the node at 550 * the given structure block offset. 551 * 552 * returns: 553 * structure block offset of the property (>=0), on success 554 * -FDT_ERR_NOTFOUND, if the requested node has no properties 555 * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_BEGIN_NODE tag 556 * -FDT_ERR_BADMAGIC, 557 * -FDT_ERR_BADVERSION, 558 * -FDT_ERR_BADSTATE, 559 * -FDT_ERR_BADSTRUCTURE, 560 * -FDT_ERR_TRUNCATED, standard meanings. 561 */ 562 int fdt_first_property_offset(const void *fdt, int nodeoffset); 563 564 /** 565 * fdt_next_property_offset - step through a node's properties 566 * @fdt: pointer to the device tree blob 567 * @offset: structure block offset of a property 568 * 569 * fdt_next_property_offset() finds the property immediately after the 570 * one at the given structure block offset. This will be a property 571 * of the same node as the given property. 572 * 573 * returns: 574 * structure block offset of the next property (>=0), on success 575 * -FDT_ERR_NOTFOUND, if the given property is the last in its node 576 * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_PROP tag 577 * -FDT_ERR_BADMAGIC, 578 * -FDT_ERR_BADVERSION, 579 * -FDT_ERR_BADSTATE, 580 * -FDT_ERR_BADSTRUCTURE, 581 * -FDT_ERR_TRUNCATED, standard meanings. 582 */ 583 int fdt_next_property_offset(const void *fdt, int offset); 584 585 /** 586 * fdt_for_each_property_offset - iterate over all properties of a node 587 * 588 * @property_offset: property offset (int, lvalue) 589 * @fdt: FDT blob (const void *) 590 * @node: node offset (int) 591 * 592 * This is actually a wrapper around a for loop and would be used like so: 593 * 594 * fdt_for_each_property_offset(property, fdt, node) { 595 * Use property 596 * ... 597 * } 598 * 599 * if ((property < 0) && (property != -FDT_ERR_NOTFOUND)) { 600 * Error handling 601 * } 602 * 603 * Note that this is implemented as a macro and property is used as 604 * iterator in the loop. The node variable can be constant or even a 605 * literal. 606 */ 607 #define fdt_for_each_property_offset(property, fdt, node) \ 608 for (property = fdt_first_property_offset(fdt, node); \ 609 property >= 0; \ 610 property = fdt_next_property_offset(fdt, property)) 611 612 /** 613 * fdt_get_property_by_offset - retrieve the property at a given offset 614 * @fdt: pointer to the device tree blob 615 * @offset: offset of the property to retrieve 616 * @lenp: pointer to an integer variable (will be overwritten) or NULL 617 * 618 * fdt_get_property_by_offset() retrieves a pointer to the 619 * fdt_property structure within the device tree blob at the given 620 * offset. If lenp is non-NULL, the length of the property value is 621 * also returned, in the integer pointed to by lenp. 622 * 623 * Note that this code only works on device tree versions >= 16. fdt_getprop() 624 * works on all versions. 625 * 626 * returns: 627 * pointer to the structure representing the property 628 * if lenp is non-NULL, *lenp contains the length of the property 629 * value (>=0) 630 * NULL, on error 631 * if lenp is non-NULL, *lenp contains an error code (<0): 632 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag 633 * -FDT_ERR_BADMAGIC, 634 * -FDT_ERR_BADVERSION, 635 * -FDT_ERR_BADSTATE, 636 * -FDT_ERR_BADSTRUCTURE, 637 * -FDT_ERR_TRUNCATED, standard meanings 638 */ 639 const struct fdt_property *fdt_get_property_by_offset(const void *fdt, 640 int offset, 641 int *lenp); 642 643 /** 644 * fdt_get_property_namelen - find a property based on substring 645 * @fdt: pointer to the device tree blob 646 * @nodeoffset: offset of the node whose property to find 647 * @name: name of the property to find 648 * @namelen: number of characters of name to consider 649 * @lenp: pointer to an integer variable (will be overwritten) or NULL 650 * 651 * Identical to fdt_get_property(), but only examine the first namelen 652 * characters of name for matching the property name. 653 */ 654 #ifndef SWIG /* Not available in Python */ 655 const struct fdt_property *fdt_get_property_namelen(const void *fdt, 656 int nodeoffset, 657 const char *name, 658 int namelen, int *lenp); 659 #endif 660 661 /** 662 * fdt_get_property - find a given property in a given node 663 * @fdt: pointer to the device tree blob 664 * @nodeoffset: offset of the node whose property to find 665 * @name: name of the property to find 666 * @lenp: pointer to an integer variable (will be overwritten) or NULL 667 * 668 * fdt_get_property() retrieves a pointer to the fdt_property 669 * structure within the device tree blob corresponding to the property 670 * named 'name' of the node at offset nodeoffset. If lenp is 671 * non-NULL, the length of the property value is also returned, in the 672 * integer pointed to by lenp. 673 * 674 * returns: 675 * pointer to the structure representing the property 676 * if lenp is non-NULL, *lenp contains the length of the property 677 * value (>=0) 678 * NULL, on error 679 * if lenp is non-NULL, *lenp contains an error code (<0): 680 * -FDT_ERR_NOTFOUND, node does not have named property 681 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE 682 * tag 683 * -FDT_ERR_BADMAGIC, 684 * -FDT_ERR_BADVERSION, 685 * -FDT_ERR_BADSTATE, 686 * -FDT_ERR_BADSTRUCTURE, 687 * -FDT_ERR_TRUNCATED, standard meanings 688 */ 689 const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, 690 const char *name, int *lenp); 691 static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, 692 const char *name, 693 int *lenp) 694 { 695 return (struct fdt_property *)(uintptr_t) 696 fdt_get_property(fdt, nodeoffset, name, lenp); 697 } 698 699 /** 700 * fdt_getprop_by_offset - retrieve the value of a property at a given offset 701 * @fdt: pointer to the device tree blob 702 * @offset: offset of the property to read 703 * @namep: pointer to a string variable (will be overwritten) or NULL 704 * @lenp: pointer to an integer variable (will be overwritten) or NULL 705 * 706 * fdt_getprop_by_offset() retrieves a pointer to the value of the 707 * property at structure block offset 'offset' (this will be a pointer 708 * to within the device blob itself, not a copy of the value). If 709 * lenp is non-NULL, the length of the property value is also 710 * returned, in the integer pointed to by lenp. If namep is non-NULL, 711 * the property's namne will also be returned in the char * pointed to 712 * by namep (this will be a pointer to within the device tree's string 713 * block, not a new copy of the name). 714 * 715 * returns: 716 * pointer to the property's value 717 * if lenp is non-NULL, *lenp contains the length of the property 718 * value (>=0) 719 * if namep is non-NULL *namep contiains a pointer to the property 720 * name. 721 * NULL, on error 722 * if lenp is non-NULL, *lenp contains an error code (<0): 723 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag 724 * -FDT_ERR_BADMAGIC, 725 * -FDT_ERR_BADVERSION, 726 * -FDT_ERR_BADSTATE, 727 * -FDT_ERR_BADSTRUCTURE, 728 * -FDT_ERR_TRUNCATED, standard meanings 729 */ 730 #ifndef SWIG /* This function is not useful in Python */ 731 const void *fdt_getprop_by_offset(const void *fdt, int offset, 732 const char **namep, int *lenp); 733 #endif 734 735 /** 736 * fdt_getprop_namelen - get property value based on substring 737 * @fdt: pointer to the device tree blob 738 * @nodeoffset: offset of the node whose property to find 739 * @name: name of the property to find 740 * @namelen: number of characters of name to consider 741 * @lenp: pointer to an integer variable (will be overwritten) or NULL 742 * 743 * Identical to fdt_getprop(), but only examine the first namelen 744 * characters of name for matching the property name. 745 */ 746 #ifndef SWIG /* Not available in Python */ 747 const void *fdt_getprop_namelen(const void *fdt, int nodeoffset, 748 const char *name, int namelen, int *lenp); 749 static inline void *fdt_getprop_namelen_w(void *fdt, int nodeoffset, 750 const char *name, int namelen, 751 int *lenp) 752 { 753 return (void *)(uintptr_t)fdt_getprop_namelen(fdt, nodeoffset, name, 754 namelen, lenp); 755 } 756 #endif 757 758 /** 759 * fdt_getprop - retrieve the value of a given property 760 * @fdt: pointer to the device tree blob 761 * @nodeoffset: offset of the node whose property to find 762 * @name: name of the property to find 763 * @lenp: pointer to an integer variable (will be overwritten) or NULL 764 * 765 * fdt_getprop() retrieves a pointer to the value of the property 766 * named 'name' of the node at offset nodeoffset (this will be a 767 * pointer to within the device blob itself, not a copy of the value). 768 * If lenp is non-NULL, the length of the property value is also 769 * returned, in the integer pointed to by lenp. 770 * 771 * returns: 772 * pointer to the property's value 773 * if lenp is non-NULL, *lenp contains the length of the property 774 * value (>=0) 775 * NULL, on error 776 * if lenp is non-NULL, *lenp contains an error code (<0): 777 * -FDT_ERR_NOTFOUND, node does not have named property 778 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE 779 * tag 780 * -FDT_ERR_BADMAGIC, 781 * -FDT_ERR_BADVERSION, 782 * -FDT_ERR_BADSTATE, 783 * -FDT_ERR_BADSTRUCTURE, 784 * -FDT_ERR_TRUNCATED, standard meanings 785 */ 786 const void *fdt_getprop(const void *fdt, int nodeoffset, 787 const char *name, int *lenp); 788 static inline void *fdt_getprop_w(void *fdt, int nodeoffset, 789 const char *name, int *lenp) 790 { 791 return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); 792 } 793 794 /** 795 * fdt_get_phandle - retrieve the phandle of a given node 796 * @fdt: pointer to the device tree blob 797 * @nodeoffset: structure block offset of the node 798 * 799 * fdt_get_phandle() retrieves the phandle of the device tree node at 800 * structure block offset nodeoffset. 801 * 802 * returns: 803 * the phandle of the node at nodeoffset, on success (!= 0, != -1) 804 * 0, if the node has no phandle, or another error occurs 805 */ 806 uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); 807 808 /** 809 * fdt_get_alias_namelen - get alias based on substring 810 * @fdt: pointer to the device tree blob 811 * @name: name of the alias th look up 812 * @namelen: number of characters of name to consider 813 * 814 * Identical to fdt_get_alias(), but only examine the first namelen 815 * characters of name for matching the alias name. 816 */ 817 #ifndef SWIG /* Not available in Python */ 818 const char *fdt_get_alias_namelen(const void *fdt, 819 const char *name, int namelen); 820 #endif 821 822 /** 823 * fdt_get_alias - retrieve the path referenced by a given alias 824 * @fdt: pointer to the device tree blob 825 * @name: name of the alias th look up 826 * 827 * fdt_get_alias() retrieves the value of a given alias. That is, the 828 * value of the property named 'name' in the node /aliases. 829 * 830 * returns: 831 * a pointer to the expansion of the alias named 'name', if it exists 832 * NULL, if the given alias or the /aliases node does not exist 833 */ 834 const char *fdt_get_alias(const void *fdt, const char *name); 835 836 /** 837 * fdt_get_path - determine the full path of a node 838 * @fdt: pointer to the device tree blob 839 * @nodeoffset: offset of the node whose path to find 840 * @buf: character buffer to contain the returned path (will be overwritten) 841 * @buflen: size of the character buffer at buf 842 * 843 * fdt_get_path() computes the full path of the node at offset 844 * nodeoffset, and records that path in the buffer at buf. 845 * 846 * NOTE: This function is expensive, as it must scan the device tree 847 * structure from the start to nodeoffset. 848 * 849 * returns: 850 * 0, on success 851 * buf contains the absolute path of the node at 852 * nodeoffset, as a NUL-terminated string. 853 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag 854 * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) 855 * characters and will not fit in the given buffer. 856 * -FDT_ERR_BADMAGIC, 857 * -FDT_ERR_BADVERSION, 858 * -FDT_ERR_BADSTATE, 859 * -FDT_ERR_BADSTRUCTURE, standard meanings 860 */ 861 int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); 862 863 /** 864 * fdt_supernode_atdepth_offset - find a specific ancestor of a node 865 * @fdt: pointer to the device tree blob 866 * @nodeoffset: offset of the node whose parent to find 867 * @supernodedepth: depth of the ancestor to find 868 * @nodedepth: pointer to an integer variable (will be overwritten) or NULL 869 * 870 * fdt_supernode_atdepth_offset() finds an ancestor of the given node 871 * at a specific depth from the root (where the root itself has depth 872 * 0, its immediate subnodes depth 1 and so forth). So 873 * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); 874 * will always return 0, the offset of the root node. If the node at 875 * nodeoffset has depth D, then: 876 * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); 877 * will return nodeoffset itself. 878 * 879 * NOTE: This function is expensive, as it must scan the device tree 880 * structure from the start to nodeoffset. 881 * 882 * returns: 883 * structure block offset of the node at node offset's ancestor 884 * of depth supernodedepth (>=0), on success 885 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag 886 * -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of 887 * nodeoffset 888 * -FDT_ERR_BADMAGIC, 889 * -FDT_ERR_BADVERSION, 890 * -FDT_ERR_BADSTATE, 891 * -FDT_ERR_BADSTRUCTURE, standard meanings 892 */ 893 int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, 894 int supernodedepth, int *nodedepth); 895 896 /** 897 * fdt_node_depth - find the depth of a given node 898 * @fdt: pointer to the device tree blob 899 * @nodeoffset: offset of the node whose parent to find 900 * 901 * fdt_node_depth() finds the depth of a given node. The root node 902 * has depth 0, its immediate subnodes depth 1 and so forth. 903 * 904 * NOTE: This function is expensive, as it must scan the device tree 905 * structure from the start to nodeoffset. 906 * 907 * returns: 908 * depth of the node at nodeoffset (>=0), on success 909 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag 910 * -FDT_ERR_BADMAGIC, 911 * -FDT_ERR_BADVERSION, 912 * -FDT_ERR_BADSTATE, 913 * -FDT_ERR_BADSTRUCTURE, standard meanings 914 */ 915 int fdt_node_depth(const void *fdt, int nodeoffset); 916 917 /** 918 * fdt_parent_offset - find the parent of a given node 919 * @fdt: pointer to the device tree blob 920 * @nodeoffset: offset of the node whose parent to find 921 * 922 * fdt_parent_offset() locates the parent node of a given node (that 923 * is, it finds the offset of the node which contains the node at 924 * nodeoffset as a subnode). 925 * 926 * NOTE: This function is expensive, as it must scan the device tree 927 * structure from the start to nodeoffset, *twice*. 928 * 929 * returns: 930 * structure block offset of the parent of the node at nodeoffset 931 * (>=0), on success 932 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag 933 * -FDT_ERR_BADMAGIC, 934 * -FDT_ERR_BADVERSION, 935 * -FDT_ERR_BADSTATE, 936 * -FDT_ERR_BADSTRUCTURE, standard meanings 937 */ 938 int fdt_parent_offset(const void *fdt, int nodeoffset); 939 940 /** 941 * fdt_node_offset_by_prop_value - find nodes with a given property value 942 * @fdt: pointer to the device tree blob 943 * @startoffset: only find nodes after this offset 944 * @propname: property name to check 945 * @propval: property value to search for 946 * @proplen: length of the value in propval 947 * 948 * fdt_node_offset_by_prop_value() returns the offset of the first 949 * node after startoffset, which has a property named propname whose 950 * value is of length proplen and has value equal to propval; or if 951 * startoffset is -1, the very first such node in the tree. 952 * 953 * To iterate through all nodes matching the criterion, the following 954 * idiom can be used: 955 * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, 956 * propval, proplen); 957 * while (offset != -FDT_ERR_NOTFOUND) { 958 * // other code here 959 * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, 960 * propval, proplen); 961 * } 962 * 963 * Note the -1 in the first call to the function, if 0 is used here 964 * instead, the function will never locate the root node, even if it 965 * matches the criterion. 966 * 967 * returns: 968 * structure block offset of the located node (>= 0, >startoffset), 969 * on success 970 * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the 971 * tree after startoffset 972 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag 973 * -FDT_ERR_BADMAGIC, 974 * -FDT_ERR_BADVERSION, 975 * -FDT_ERR_BADSTATE, 976 * -FDT_ERR_BADSTRUCTURE, standard meanings 977 */ 978 int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, 979 const char *propname, 980 const void *propval, int proplen); 981 982 /** 983 * fdt_node_offset_by_phandle - find the node with a given phandle 984 * @fdt: pointer to the device tree blob 985 * @phandle: phandle value 986 * 987 * fdt_node_offset_by_phandle() returns the offset of the node 988 * which has the given phandle value. If there is more than one node 989 * in the tree with the given phandle (an invalid tree), results are 990 * undefined. 991 * 992 * returns: 993 * structure block offset of the located node (>= 0), on success 994 * -FDT_ERR_NOTFOUND, no node with that phandle exists 995 * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) 996 * -FDT_ERR_BADMAGIC, 997 * -FDT_ERR_BADVERSION, 998 * -FDT_ERR_BADSTATE, 999 * -FDT_ERR_BADSTRUCTURE, standard meanings 1000 */ 1001 int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); 1002 1003 /** 1004 * fdt_node_check_compatible: check a node's compatible property 1005 * @fdt: pointer to the device tree blob 1006 * @nodeoffset: offset of a tree node 1007 * @compatible: string to match against 1008 * 1009 * 1010 * fdt_node_check_compatible() returns 0 if the given node contains a 1011 * 'compatible' property with the given string as one of its elements, 1012 * it returns non-zero otherwise, or on error. 1013 * 1014 * returns: 1015 * 0, if the node has a 'compatible' property listing the given string 1016 * 1, if the node has a 'compatible' property, but it does not list 1017 * the given string 1018 * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property 1019 * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag 1020 * -FDT_ERR_BADMAGIC, 1021 * -FDT_ERR_BADVERSION, 1022 * -FDT_ERR_BADSTATE, 1023 * -FDT_ERR_BADSTRUCTURE, standard meanings 1024 */ 1025 int fdt_node_check_compatible(const void *fdt, int nodeoffset, 1026 const char *compatible); 1027 1028 /** 1029 * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value 1030 * @fdt: pointer to the device tree blob 1031 * @startoffset: only find nodes after this offset 1032 * @compatible: 'compatible' string to match against 1033 * 1034 * fdt_node_offset_by_compatible() returns the offset of the first 1035 * node after startoffset, which has a 'compatible' property which 1036 * lists the given compatible string; or if startoffset is -1, the 1037 * very first such node in the tree. 1038 * 1039 * To iterate through all nodes matching the criterion, the following 1040 * idiom can be used: 1041 * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); 1042 * while (offset != -FDT_ERR_NOTFOUND) { 1043 * // other code here 1044 * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); 1045 * } 1046 * 1047 * Note the -1 in the first call to the function, if 0 is used here 1048 * instead, the function will never locate the root node, even if it 1049 * matches the criterion. 1050 * 1051 * returns: 1052 * structure block offset of the located node (>= 0, >startoffset), 1053 * on success 1054 * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the 1055 * tree after startoffset 1056 * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag 1057 * -FDT_ERR_BADMAGIC, 1058 * -FDT_ERR_BADVERSION, 1059 * -FDT_ERR_BADSTATE, 1060 * -FDT_ERR_BADSTRUCTURE, standard meanings 1061 */ 1062 int fdt_node_offset_by_compatible(const void *fdt, int startoffset, 1063 const char *compatible); 1064 1065 /** 1066 * fdt_stringlist_contains - check a string list property for a string 1067 * @strlist: Property containing a list of strings to check 1068 * @listlen: Length of property 1069 * @str: String to search for 1070 * 1071 * This is a utility function provided for convenience. The list contains 1072 * one or more strings, each terminated by \0, as is found in a device tree 1073 * "compatible" property. 1074 * 1075 * @return: 1 if the string is found in the list, 0 not found, or invalid list 1076 */ 1077 int fdt_stringlist_contains(const char *strlist, int listlen, const char *str); 1078 1079 /** 1080 * fdt_stringlist_count - count the number of strings in a string list 1081 * @fdt: pointer to the device tree blob 1082 * @nodeoffset: offset of a tree node 1083 * @property: name of the property containing the string list 1084 * @return: 1085 * the number of strings in the given property 1086 * -FDT_ERR_BADVALUE if the property value is not NUL-terminated 1087 * -FDT_ERR_NOTFOUND if the property does not exist 1088 */ 1089 int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property); 1090 1091 /** 1092 * fdt_stringlist_search - find a string in a string list and return its index 1093 * @fdt: pointer to the device tree blob 1094 * @nodeoffset: offset of a tree node 1095 * @property: name of the property containing the string list 1096 * @string: string to look up in the string list 1097 * 1098 * Note that it is possible for this function to succeed on property values 1099 * that are not NUL-terminated. That's because the function will stop after 1100 * finding the first occurrence of @string. This can for example happen with 1101 * small-valued cell properties, such as #address-cells, when searching for 1102 * the empty string. 1103 * 1104 * @return: 1105 * the index of the string in the list of strings 1106 * -FDT_ERR_BADVALUE if the property value is not NUL-terminated 1107 * -FDT_ERR_NOTFOUND if the property does not exist or does not contain 1108 * the given string 1109 */ 1110 int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property, 1111 const char *string); 1112 1113 /** 1114 * fdt_stringlist_get() - obtain the string at a given index in a string list 1115 * @fdt: pointer to the device tree blob 1116 * @nodeoffset: offset of a tree node 1117 * @property: name of the property containing the string list 1118 * @index: index of the string to return 1119 * @lenp: return location for the string length or an error code on failure 1120 * 1121 * Note that this will successfully extract strings from properties with 1122 * non-NUL-terminated values. For example on small-valued cell properties 1123 * this function will return the empty string. 1124 * 1125 * If non-NULL, the length of the string (on success) or a negative error-code 1126 * (on failure) will be stored in the integer pointer to by lenp. 1127 * 1128 * @return: 1129 * A pointer to the string at the given index in the string list or NULL on 1130 * failure. On success the length of the string will be stored in the memory 1131 * location pointed to by the lenp parameter, if non-NULL. On failure one of 1132 * the following negative error codes will be returned in the lenp parameter 1133 * (if non-NULL): 1134 * -FDT_ERR_BADVALUE if the property value is not NUL-terminated 1135 * -FDT_ERR_NOTFOUND if the property does not exist 1136 */ 1137 const char *fdt_stringlist_get(const void *fdt, int nodeoffset, 1138 const char *property, int index, 1139 int *lenp); 1140 1141 /**********************************************************************/ 1142 /* Read-only functions (addressing related) */ 1143 /**********************************************************************/ 1144 1145 /** 1146 * FDT_MAX_NCELLS - maximum value for #address-cells and #size-cells 1147 * 1148 * This is the maximum value for #address-cells, #size-cells and 1149 * similar properties that will be processed by libfdt. IEE1275 1150 * requires that OF implementations handle values up to 4. 1151 * Implementations may support larger values, but in practice higher 1152 * values aren't used. 1153 */ 1154 #define FDT_MAX_NCELLS 4 1155 1156 /** 1157 * fdt_address_cells - retrieve address size for a bus represented in the tree 1158 * @fdt: pointer to the device tree blob 1159 * @nodeoffset: offset of the node to find the address size for 1160 * 1161 * When the node has a valid #address-cells property, returns its value. 1162 * 1163 * returns: 1164 * 0 <= n < FDT_MAX_NCELLS, on success 1165 * 2, if the node has no #address-cells property 1166 * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid 1167 * #address-cells property 1168 * -FDT_ERR_BADMAGIC, 1169 * -FDT_ERR_BADVERSION, 1170 * -FDT_ERR_BADSTATE, 1171 * -FDT_ERR_BADSTRUCTURE, 1172 * -FDT_ERR_TRUNCATED, standard meanings 1173 */ 1174 int fdt_address_cells(const void *fdt, int nodeoffset); 1175 1176 /** 1177 * fdt_size_cells - retrieve address range size for a bus represented in the 1178 * tree 1179 * @fdt: pointer to the device tree blob 1180 * @nodeoffset: offset of the node to find the address range size for 1181 * 1182 * When the node has a valid #size-cells property, returns its value. 1183 * 1184 * returns: 1185 * 0 <= n < FDT_MAX_NCELLS, on success 1186 * 1, if the node has no #size-cells property 1187 * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid 1188 * #size-cells property 1189 * -FDT_ERR_BADMAGIC, 1190 * -FDT_ERR_BADVERSION, 1191 * -FDT_ERR_BADSTATE, 1192 * -FDT_ERR_BADSTRUCTURE, 1193 * -FDT_ERR_TRUNCATED, standard meanings 1194 */ 1195 int fdt_size_cells(const void *fdt, int nodeoffset); 1196 1197 1198 /**********************************************************************/ 1199 /* Write-in-place functions */ 1200 /**********************************************************************/ 1201 1202 /** 1203 * fdt_setprop_inplace_namelen_partial - change a property's value, 1204 * but not its size 1205 * @fdt: pointer to the device tree blob 1206 * @nodeoffset: offset of the node whose property to change 1207 * @name: name of the property to change 1208 * @namelen: number of characters of name to consider 1209 * @idx: index of the property to change in the array 1210 * @val: pointer to data to replace the property value with 1211 * @len: length of the property value 1212 * 1213 * Identical to fdt_setprop_inplace(), but modifies the given property 1214 * starting from the given index, and using only the first characters 1215 * of the name. It is useful when you want to manipulate only one value of 1216 * an array and you have a string that doesn't end with \0. 1217 */ 1218 #ifndef SWIG /* Not available in Python */ 1219 int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset, 1220 const char *name, int namelen, 1221 uint32_t idx, const void *val, 1222 int len); 1223 #endif 1224 1225 /** 1226 * fdt_setprop_inplace - change a property's value, but not its size 1227 * @fdt: pointer to the device tree blob 1228 * @nodeoffset: offset of the node whose property to change 1229 * @name: name of the property to change 1230 * @val: pointer to data to replace the property value with 1231 * @len: length of the property value 1232 * 1233 * fdt_setprop_inplace() replaces the value of a given property with 1234 * the data in val, of length len. This function cannot change the 1235 * size of a property, and so will only work if len is equal to the 1236 * current length of the property. 1237 * 1238 * This function will alter only the bytes in the blob which contain 1239 * the given property value, and will not alter or move any other part 1240 * of the tree. 1241 * 1242 * returns: 1243 * 0, on success 1244 * -FDT_ERR_NOSPACE, if len is not equal to the property's current length 1245 * -FDT_ERR_NOTFOUND, node does not have the named property 1246 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1247 * -FDT_ERR_BADMAGIC, 1248 * -FDT_ERR_BADVERSION, 1249 * -FDT_ERR_BADSTATE, 1250 * -FDT_ERR_BADSTRUCTURE, 1251 * -FDT_ERR_TRUNCATED, standard meanings 1252 */ 1253 #ifndef SWIG /* Not available in Python */ 1254 int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, 1255 const void *val, int len); 1256 #endif 1257 1258 /** 1259 * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property 1260 * @fdt: pointer to the device tree blob 1261 * @nodeoffset: offset of the node whose property to change 1262 * @name: name of the property to change 1263 * @val: 32-bit integer value to replace the property with 1264 * 1265 * fdt_setprop_inplace_u32() replaces the value of a given property 1266 * with the 32-bit integer value in val, converting val to big-endian 1267 * if necessary. This function cannot change the size of a property, 1268 * and so will only work if the property already exists and has length 1269 * 4. 1270 * 1271 * This function will alter only the bytes in the blob which contain 1272 * the given property value, and will not alter or move any other part 1273 * of the tree. 1274 * 1275 * returns: 1276 * 0, on success 1277 * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 1278 * -FDT_ERR_NOTFOUND, node does not have the named property 1279 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1280 * -FDT_ERR_BADMAGIC, 1281 * -FDT_ERR_BADVERSION, 1282 * -FDT_ERR_BADSTATE, 1283 * -FDT_ERR_BADSTRUCTURE, 1284 * -FDT_ERR_TRUNCATED, standard meanings 1285 */ 1286 static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset, 1287 const char *name, uint32_t val) 1288 { 1289 fdt32_t tmp = cpu_to_fdt32(val); 1290 return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); 1291 } 1292 1293 /** 1294 * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property 1295 * @fdt: pointer to the device tree blob 1296 * @nodeoffset: offset of the node whose property to change 1297 * @name: name of the property to change 1298 * @val: 64-bit integer value to replace the property with 1299 * 1300 * fdt_setprop_inplace_u64() replaces the value of a given property 1301 * with the 64-bit integer value in val, converting val to big-endian 1302 * if necessary. This function cannot change the size of a property, 1303 * and so will only work if the property already exists and has length 1304 * 8. 1305 * 1306 * This function will alter only the bytes in the blob which contain 1307 * the given property value, and will not alter or move any other part 1308 * of the tree. 1309 * 1310 * returns: 1311 * 0, on success 1312 * -FDT_ERR_NOSPACE, if the property's length is not equal to 8 1313 * -FDT_ERR_NOTFOUND, node does not have the named property 1314 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1315 * -FDT_ERR_BADMAGIC, 1316 * -FDT_ERR_BADVERSION, 1317 * -FDT_ERR_BADSTATE, 1318 * -FDT_ERR_BADSTRUCTURE, 1319 * -FDT_ERR_TRUNCATED, standard meanings 1320 */ 1321 static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset, 1322 const char *name, uint64_t val) 1323 { 1324 fdt64_t tmp = cpu_to_fdt64(val); 1325 return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); 1326 } 1327 1328 /** 1329 * fdt_setprop_inplace_cell - change the value of a single-cell property 1330 * 1331 * This is an alternative name for fdt_setprop_inplace_u32() 1332 */ 1333 static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, 1334 const char *name, uint32_t val) 1335 { 1336 return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val); 1337 } 1338 1339 /** 1340 * fdt_nop_property - replace a property with nop tags 1341 * @fdt: pointer to the device tree blob 1342 * @nodeoffset: offset of the node whose property to nop 1343 * @name: name of the property to nop 1344 * 1345 * fdt_nop_property() will replace a given property's representation 1346 * in the blob with FDT_NOP tags, effectively removing it from the 1347 * tree. 1348 * 1349 * This function will alter only the bytes in the blob which contain 1350 * the property, and will not alter or move any other part of the 1351 * tree. 1352 * 1353 * returns: 1354 * 0, on success 1355 * -FDT_ERR_NOTFOUND, node does not have the named property 1356 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1357 * -FDT_ERR_BADMAGIC, 1358 * -FDT_ERR_BADVERSION, 1359 * -FDT_ERR_BADSTATE, 1360 * -FDT_ERR_BADSTRUCTURE, 1361 * -FDT_ERR_TRUNCATED, standard meanings 1362 */ 1363 int fdt_nop_property(void *fdt, int nodeoffset, const char *name); 1364 1365 /** 1366 * fdt_nop_node - replace a node (subtree) with nop tags 1367 * @fdt: pointer to the device tree blob 1368 * @nodeoffset: offset of the node to nop 1369 * 1370 * fdt_nop_node() will replace a given node's representation in the 1371 * blob, including all its subnodes, if any, with FDT_NOP tags, 1372 * effectively removing it from the tree. 1373 * 1374 * This function will alter only the bytes in the blob which contain 1375 * the node and its properties and subnodes, and will not alter or 1376 * move any other part of the tree. 1377 * 1378 * returns: 1379 * 0, on success 1380 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1381 * -FDT_ERR_BADMAGIC, 1382 * -FDT_ERR_BADVERSION, 1383 * -FDT_ERR_BADSTATE, 1384 * -FDT_ERR_BADSTRUCTURE, 1385 * -FDT_ERR_TRUNCATED, standard meanings 1386 */ 1387 int fdt_nop_node(void *fdt, int nodeoffset); 1388 1389 /**********************************************************************/ 1390 /* Sequential write functions */ 1391 /**********************************************************************/ 1392 1393 /* fdt_create_with_flags flags */ 1394 #define FDT_CREATE_FLAG_NO_NAME_DEDUP 0x1 1395 /* FDT_CREATE_FLAG_NO_NAME_DEDUP: Do not try to de-duplicate property 1396 * names in the fdt. This can result in faster creation times, but 1397 * a larger fdt. */ 1398 1399 #define FDT_CREATE_FLAGS_ALL (FDT_CREATE_FLAG_NO_NAME_DEDUP) 1400 1401 /** 1402 * fdt_create_with_flags - begin creation of a new fdt 1403 * @fdt: pointer to memory allocated where fdt will be created 1404 * @bufsize: size of the memory space at fdt 1405 * @flags: a valid combination of FDT_CREATE_FLAG_ flags, or 0. 1406 * 1407 * fdt_create_with_flags() begins the process of creating a new fdt with 1408 * the sequential write interface. 1409 * 1410 * fdt creation process must end with fdt_finished() to produce a valid fdt. 1411 * 1412 * returns: 1413 * 0, on success 1414 * -FDT_ERR_NOSPACE, bufsize is insufficient for a minimal fdt 1415 * -FDT_ERR_BADFLAGS, flags is not valid 1416 */ 1417 int fdt_create_with_flags(void *buf, int bufsize, uint32_t flags); 1418 1419 /** 1420 * fdt_create - begin creation of a new fdt 1421 * @fdt: pointer to memory allocated where fdt will be created 1422 * @bufsize: size of the memory space at fdt 1423 * 1424 * fdt_create() is equivalent to fdt_create_with_flags() with flags=0. 1425 * 1426 * returns: 1427 * 0, on success 1428 * -FDT_ERR_NOSPACE, bufsize is insufficient for a minimal fdt 1429 */ 1430 int fdt_create(void *buf, int bufsize); 1431 1432 int fdt_resize(void *fdt, void *buf, int bufsize); 1433 int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); 1434 int fdt_finish_reservemap(void *fdt); 1435 int fdt_begin_node(void *fdt, const char *name); 1436 int fdt_property(void *fdt, const char *name, const void *val, int len); 1437 static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val) 1438 { 1439 fdt32_t tmp = cpu_to_fdt32(val); 1440 return fdt_property(fdt, name, &tmp, sizeof(tmp)); 1441 } 1442 static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val) 1443 { 1444 fdt64_t tmp = cpu_to_fdt64(val); 1445 return fdt_property(fdt, name, &tmp, sizeof(tmp)); 1446 } 1447 1448 #ifndef SWIG /* Not available in Python */ 1449 static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) 1450 { 1451 return fdt_property_u32(fdt, name, val); 1452 } 1453 #endif 1454 1455 /** 1456 * fdt_property_placeholder - add a new property and return a ptr to its value 1457 * 1458 * @fdt: pointer to the device tree blob 1459 * @name: name of property to add 1460 * @len: length of property value in bytes 1461 * @valp: returns a pointer to where where the value should be placed 1462 * 1463 * returns: 1464 * 0, on success 1465 * -FDT_ERR_BADMAGIC, 1466 * -FDT_ERR_NOSPACE, standard meanings 1467 */ 1468 int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp); 1469 1470 #define fdt_property_string(fdt, name, str) \ 1471 fdt_property(fdt, name, str, strlen(str)+1) 1472 int fdt_end_node(void *fdt); 1473 int fdt_finish(void *fdt); 1474 1475 /**********************************************************************/ 1476 /* Read-write functions */ 1477 /**********************************************************************/ 1478 1479 int fdt_create_empty_tree(void *buf, int bufsize); 1480 int fdt_open_into(const void *fdt, void *buf, int bufsize); 1481 int fdt_pack(void *fdt); 1482 1483 /** 1484 * fdt_add_mem_rsv - add one memory reserve map entry 1485 * @fdt: pointer to the device tree blob 1486 * @address, @size: 64-bit values (native endian) 1487 * 1488 * Adds a reserve map entry to the given blob reserving a region at 1489 * address address of length size. 1490 * 1491 * This function will insert data into the reserve map and will 1492 * therefore change the indexes of some entries in the table. 1493 * 1494 * returns: 1495 * 0, on success 1496 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1497 * contain the new reservation entry 1498 * -FDT_ERR_BADMAGIC, 1499 * -FDT_ERR_BADVERSION, 1500 * -FDT_ERR_BADSTATE, 1501 * -FDT_ERR_BADSTRUCTURE, 1502 * -FDT_ERR_BADLAYOUT, 1503 * -FDT_ERR_TRUNCATED, standard meanings 1504 */ 1505 int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); 1506 1507 /** 1508 * fdt_del_mem_rsv - remove a memory reserve map entry 1509 * @fdt: pointer to the device tree blob 1510 * @n: entry to remove 1511 * 1512 * fdt_del_mem_rsv() removes the n-th memory reserve map entry from 1513 * the blob. 1514 * 1515 * This function will delete data from the reservation table and will 1516 * therefore change the indexes of some entries in the table. 1517 * 1518 * returns: 1519 * 0, on success 1520 * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there 1521 * are less than n+1 reserve map entries) 1522 * -FDT_ERR_BADMAGIC, 1523 * -FDT_ERR_BADVERSION, 1524 * -FDT_ERR_BADSTATE, 1525 * -FDT_ERR_BADSTRUCTURE, 1526 * -FDT_ERR_BADLAYOUT, 1527 * -FDT_ERR_TRUNCATED, standard meanings 1528 */ 1529 int fdt_del_mem_rsv(void *fdt, int n); 1530 1531 /** 1532 * fdt_set_name - change the name of a given node 1533 * @fdt: pointer to the device tree blob 1534 * @nodeoffset: structure block offset of a node 1535 * @name: name to give the node 1536 * 1537 * fdt_set_name() replaces the name (including unit address, if any) 1538 * of the given node with the given string. NOTE: this function can't 1539 * efficiently check if the new name is unique amongst the given 1540 * node's siblings; results are undefined if this function is invoked 1541 * with a name equal to one of the given node's siblings. 1542 * 1543 * This function may insert or delete data from the blob, and will 1544 * therefore change the offsets of some existing nodes. 1545 * 1546 * returns: 1547 * 0, on success 1548 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob 1549 * to contain the new name 1550 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1551 * -FDT_ERR_BADMAGIC, 1552 * -FDT_ERR_BADVERSION, 1553 * -FDT_ERR_BADSTATE, standard meanings 1554 */ 1555 int fdt_set_name(void *fdt, int nodeoffset, const char *name); 1556 1557 /** 1558 * fdt_setprop - create or change a property 1559 * @fdt: pointer to the device tree blob 1560 * @nodeoffset: offset of the node whose property to change 1561 * @name: name of the property to change 1562 * @val: pointer to data to set the property value to 1563 * @len: length of the property value 1564 * 1565 * fdt_setprop() sets the value of the named property in the given 1566 * node to the given value and length, creating the property if it 1567 * does not already exist. 1568 * 1569 * This function may insert or delete data from the blob, and will 1570 * therefore change the offsets of some existing nodes. 1571 * 1572 * returns: 1573 * 0, on success 1574 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1575 * contain the new property value 1576 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1577 * -FDT_ERR_BADLAYOUT, 1578 * -FDT_ERR_BADMAGIC, 1579 * -FDT_ERR_BADVERSION, 1580 * -FDT_ERR_BADSTATE, 1581 * -FDT_ERR_BADSTRUCTURE, 1582 * -FDT_ERR_BADLAYOUT, 1583 * -FDT_ERR_TRUNCATED, standard meanings 1584 */ 1585 int fdt_setprop(void *fdt, int nodeoffset, const char *name, 1586 const void *val, int len); 1587 1588 /** 1589 * fdt_setprop_placeholder - allocate space for a property 1590 * @fdt: pointer to the device tree blob 1591 * @nodeoffset: offset of the node whose property to change 1592 * @name: name of the property to change 1593 * @len: length of the property value 1594 * @prop_data: return pointer to property data 1595 * 1596 * fdt_setprop_placeholer() allocates the named property in the given node. 1597 * If the property exists it is resized. In either case a pointer to the 1598 * property data is returned. 1599 * 1600 * This function may insert or delete data from the blob, and will 1601 * therefore change the offsets of some existing nodes. 1602 * 1603 * returns: 1604 * 0, on success 1605 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1606 * contain the new property value 1607 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1608 * -FDT_ERR_BADLAYOUT, 1609 * -FDT_ERR_BADMAGIC, 1610 * -FDT_ERR_BADVERSION, 1611 * -FDT_ERR_BADSTATE, 1612 * -FDT_ERR_BADSTRUCTURE, 1613 * -FDT_ERR_BADLAYOUT, 1614 * -FDT_ERR_TRUNCATED, standard meanings 1615 */ 1616 int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name, 1617 int len, void **prop_data); 1618 1619 /** 1620 * fdt_setprop_u32 - set a property to a 32-bit integer 1621 * @fdt: pointer to the device tree blob 1622 * @nodeoffset: offset of the node whose property to change 1623 * @name: name of the property to change 1624 * @val: 32-bit integer value for the property (native endian) 1625 * 1626 * fdt_setprop_u32() sets the value of the named property in the given 1627 * node to the given 32-bit integer value (converting to big-endian if 1628 * necessary), or creates a new property with that value if it does 1629 * not already exist. 1630 * 1631 * This function may insert or delete data from the blob, and will 1632 * therefore change the offsets of some existing nodes. 1633 * 1634 * returns: 1635 * 0, on success 1636 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1637 * contain the new property value 1638 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1639 * -FDT_ERR_BADLAYOUT, 1640 * -FDT_ERR_BADMAGIC, 1641 * -FDT_ERR_BADVERSION, 1642 * -FDT_ERR_BADSTATE, 1643 * -FDT_ERR_BADSTRUCTURE, 1644 * -FDT_ERR_BADLAYOUT, 1645 * -FDT_ERR_TRUNCATED, standard meanings 1646 */ 1647 static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name, 1648 uint32_t val) 1649 { 1650 fdt32_t tmp = cpu_to_fdt32(val); 1651 return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); 1652 } 1653 1654 /** 1655 * fdt_setprop_u64 - set a property to a 64-bit integer 1656 * @fdt: pointer to the device tree blob 1657 * @nodeoffset: offset of the node whose property to change 1658 * @name: name of the property to change 1659 * @val: 64-bit integer value for the property (native endian) 1660 * 1661 * fdt_setprop_u64() sets the value of the named property in the given 1662 * node to the given 64-bit integer value (converting to big-endian if 1663 * necessary), or creates a new property with that value if it does 1664 * not already exist. 1665 * 1666 * This function may insert or delete data from the blob, and will 1667 * therefore change the offsets of some existing nodes. 1668 * 1669 * returns: 1670 * 0, on success 1671 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1672 * contain the new property value 1673 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1674 * -FDT_ERR_BADLAYOUT, 1675 * -FDT_ERR_BADMAGIC, 1676 * -FDT_ERR_BADVERSION, 1677 * -FDT_ERR_BADSTATE, 1678 * -FDT_ERR_BADSTRUCTURE, 1679 * -FDT_ERR_BADLAYOUT, 1680 * -FDT_ERR_TRUNCATED, standard meanings 1681 */ 1682 static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name, 1683 uint64_t val) 1684 { 1685 fdt64_t tmp = cpu_to_fdt64(val); 1686 return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); 1687 } 1688 1689 /** 1690 * fdt_setprop_cell - set a property to a single cell value 1691 * 1692 * This is an alternative name for fdt_setprop_u32() 1693 */ 1694 static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, 1695 uint32_t val) 1696 { 1697 return fdt_setprop_u32(fdt, nodeoffset, name, val); 1698 } 1699 1700 /** 1701 * fdt_setprop_string - set a property to a string value 1702 * @fdt: pointer to the device tree blob 1703 * @nodeoffset: offset of the node whose property to change 1704 * @name: name of the property to change 1705 * @str: string value for the property 1706 * 1707 * fdt_setprop_string() sets the value of the named property in the 1708 * given node to the given string value (using the length of the 1709 * string to determine the new length of the property), or creates a 1710 * new property with that value if it does not already exist. 1711 * 1712 * This function may insert or delete data from the blob, and will 1713 * therefore change the offsets of some existing nodes. 1714 * 1715 * returns: 1716 * 0, on success 1717 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1718 * contain the new property value 1719 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1720 * -FDT_ERR_BADLAYOUT, 1721 * -FDT_ERR_BADMAGIC, 1722 * -FDT_ERR_BADVERSION, 1723 * -FDT_ERR_BADSTATE, 1724 * -FDT_ERR_BADSTRUCTURE, 1725 * -FDT_ERR_BADLAYOUT, 1726 * -FDT_ERR_TRUNCATED, standard meanings 1727 */ 1728 #define fdt_setprop_string(fdt, nodeoffset, name, str) \ 1729 fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) 1730 1731 1732 /** 1733 * fdt_setprop_empty - set a property to an empty value 1734 * @fdt: pointer to the device tree blob 1735 * @nodeoffset: offset of the node whose property to change 1736 * @name: name of the property to change 1737 * 1738 * fdt_setprop_empty() sets the value of the named property in the 1739 * given node to an empty (zero length) value, or creates a new empty 1740 * property if it does not already exist. 1741 * 1742 * This function may insert or delete data from the blob, and will 1743 * therefore change the offsets of some existing nodes. 1744 * 1745 * returns: 1746 * 0, on success 1747 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1748 * contain the new property value 1749 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1750 * -FDT_ERR_BADLAYOUT, 1751 * -FDT_ERR_BADMAGIC, 1752 * -FDT_ERR_BADVERSION, 1753 * -FDT_ERR_BADSTATE, 1754 * -FDT_ERR_BADSTRUCTURE, 1755 * -FDT_ERR_BADLAYOUT, 1756 * -FDT_ERR_TRUNCATED, standard meanings 1757 */ 1758 #define fdt_setprop_empty(fdt, nodeoffset, name) \ 1759 fdt_setprop((fdt), (nodeoffset), (name), NULL, 0) 1760 1761 /** 1762 * fdt_appendprop - append to or create a property 1763 * @fdt: pointer to the device tree blob 1764 * @nodeoffset: offset of the node whose property to change 1765 * @name: name of the property to append to 1766 * @val: pointer to data to append to the property value 1767 * @len: length of the data to append to the property value 1768 * 1769 * fdt_appendprop() appends the value to the named property in the 1770 * given node, creating the property if it does not already exist. 1771 * 1772 * This function may insert data into the blob, and will therefore 1773 * change the offsets of some existing nodes. 1774 * 1775 * returns: 1776 * 0, on success 1777 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1778 * contain the new property value 1779 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1780 * -FDT_ERR_BADLAYOUT, 1781 * -FDT_ERR_BADMAGIC, 1782 * -FDT_ERR_BADVERSION, 1783 * -FDT_ERR_BADSTATE, 1784 * -FDT_ERR_BADSTRUCTURE, 1785 * -FDT_ERR_BADLAYOUT, 1786 * -FDT_ERR_TRUNCATED, standard meanings 1787 */ 1788 int fdt_appendprop(void *fdt, int nodeoffset, const char *name, 1789 const void *val, int len); 1790 1791 /** 1792 * fdt_appendprop_u32 - append a 32-bit integer value to a property 1793 * @fdt: pointer to the device tree blob 1794 * @nodeoffset: offset of the node whose property to change 1795 * @name: name of the property to change 1796 * @val: 32-bit integer value to append to the property (native endian) 1797 * 1798 * fdt_appendprop_u32() appends the given 32-bit integer value 1799 * (converting to big-endian if necessary) to the value of the named 1800 * property in the given node, or creates a new property with that 1801 * value if it does not already exist. 1802 * 1803 * This function may insert data into the blob, and will therefore 1804 * change the offsets of some existing nodes. 1805 * 1806 * returns: 1807 * 0, on success 1808 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1809 * contain the new property value 1810 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1811 * -FDT_ERR_BADLAYOUT, 1812 * -FDT_ERR_BADMAGIC, 1813 * -FDT_ERR_BADVERSION, 1814 * -FDT_ERR_BADSTATE, 1815 * -FDT_ERR_BADSTRUCTURE, 1816 * -FDT_ERR_BADLAYOUT, 1817 * -FDT_ERR_TRUNCATED, standard meanings 1818 */ 1819 static inline int fdt_appendprop_u32(void *fdt, int nodeoffset, 1820 const char *name, uint32_t val) 1821 { 1822 fdt32_t tmp = cpu_to_fdt32(val); 1823 return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); 1824 } 1825 1826 /** 1827 * fdt_appendprop_u64 - append a 64-bit integer value to a property 1828 * @fdt: pointer to the device tree blob 1829 * @nodeoffset: offset of the node whose property to change 1830 * @name: name of the property to change 1831 * @val: 64-bit integer value to append to the property (native endian) 1832 * 1833 * fdt_appendprop_u64() appends the given 64-bit integer value 1834 * (converting to big-endian if necessary) to the value of the named 1835 * property in the given node, or creates a new property with that 1836 * value if it does not already exist. 1837 * 1838 * This function may insert data into the blob, and will therefore 1839 * change the offsets of some existing nodes. 1840 * 1841 * returns: 1842 * 0, on success 1843 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1844 * contain the new property value 1845 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1846 * -FDT_ERR_BADLAYOUT, 1847 * -FDT_ERR_BADMAGIC, 1848 * -FDT_ERR_BADVERSION, 1849 * -FDT_ERR_BADSTATE, 1850 * -FDT_ERR_BADSTRUCTURE, 1851 * -FDT_ERR_BADLAYOUT, 1852 * -FDT_ERR_TRUNCATED, standard meanings 1853 */ 1854 static inline int fdt_appendprop_u64(void *fdt, int nodeoffset, 1855 const char *name, uint64_t val) 1856 { 1857 fdt64_t tmp = cpu_to_fdt64(val); 1858 return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); 1859 } 1860 1861 /** 1862 * fdt_appendprop_cell - append a single cell value to a property 1863 * 1864 * This is an alternative name for fdt_appendprop_u32() 1865 */ 1866 static inline int fdt_appendprop_cell(void *fdt, int nodeoffset, 1867 const char *name, uint32_t val) 1868 { 1869 return fdt_appendprop_u32(fdt, nodeoffset, name, val); 1870 } 1871 1872 /** 1873 * fdt_appendprop_string - append a string to a property 1874 * @fdt: pointer to the device tree blob 1875 * @nodeoffset: offset of the node whose property to change 1876 * @name: name of the property to change 1877 * @str: string value to append to the property 1878 * 1879 * fdt_appendprop_string() appends the given string to the value of 1880 * the named property in the given node, or creates a new property 1881 * with that value if it does not already exist. 1882 * 1883 * This function may insert data into the blob, and will therefore 1884 * change the offsets of some existing nodes. 1885 * 1886 * returns: 1887 * 0, on success 1888 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1889 * contain the new property value 1890 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1891 * -FDT_ERR_BADLAYOUT, 1892 * -FDT_ERR_BADMAGIC, 1893 * -FDT_ERR_BADVERSION, 1894 * -FDT_ERR_BADSTATE, 1895 * -FDT_ERR_BADSTRUCTURE, 1896 * -FDT_ERR_BADLAYOUT, 1897 * -FDT_ERR_TRUNCATED, standard meanings 1898 */ 1899 #define fdt_appendprop_string(fdt, nodeoffset, name, str) \ 1900 fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) 1901 1902 /** 1903 * fdt_appendprop_addrrange - append a address range property 1904 * @fdt: pointer to the device tree blob 1905 * @parent: offset of the parent node 1906 * @nodeoffset: offset of the node to add a property at 1907 * @name: name of property 1908 * @addr: start address of a given range 1909 * @size: size of a given range 1910 * 1911 * fdt_appendprop_addrrange() appends an address range value (start 1912 * address and size) to the value of the named property in the given 1913 * node, or creates a new property with that value if it does not 1914 * already exist. 1915 * If "name" is not specified, a default "reg" is used. 1916 * Cell sizes are determined by parent's #address-cells and #size-cells. 1917 * 1918 * This function may insert data into the blob, and will therefore 1919 * change the offsets of some existing nodes. 1920 * 1921 * returns: 1922 * 0, on success 1923 * -FDT_ERR_BADLAYOUT, 1924 * -FDT_ERR_BADMAGIC, 1925 * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid 1926 * #address-cells property 1927 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1928 * -FDT_ERR_BADSTATE, 1929 * -FDT_ERR_BADSTRUCTURE, 1930 * -FDT_ERR_BADVERSION, 1931 * -FDT_ERR_BADVALUE, addr or size doesn't fit to respective cells size 1932 * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to 1933 * contain a new property 1934 * -FDT_ERR_TRUNCATED, standard meanings 1935 */ 1936 int fdt_appendprop_addrrange(void *fdt, int parent, int nodeoffset, 1937 const char *name, uint64_t addr, uint64_t size); 1938 1939 /** 1940 * fdt_delprop - delete a property 1941 * @fdt: pointer to the device tree blob 1942 * @nodeoffset: offset of the node whose property to nop 1943 * @name: name of the property to nop 1944 * 1945 * fdt_del_property() will delete the given property. 1946 * 1947 * This function will delete data from the blob, and will therefore 1948 * change the offsets of some existing nodes. 1949 * 1950 * returns: 1951 * 0, on success 1952 * -FDT_ERR_NOTFOUND, node does not have the named property 1953 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 1954 * -FDT_ERR_BADLAYOUT, 1955 * -FDT_ERR_BADMAGIC, 1956 * -FDT_ERR_BADVERSION, 1957 * -FDT_ERR_BADSTATE, 1958 * -FDT_ERR_BADSTRUCTURE, 1959 * -FDT_ERR_TRUNCATED, standard meanings 1960 */ 1961 int fdt_delprop(void *fdt, int nodeoffset, const char *name); 1962 1963 /** 1964 * fdt_add_subnode_namelen - creates a new node based on substring 1965 * @fdt: pointer to the device tree blob 1966 * @parentoffset: structure block offset of a node 1967 * @name: name of the subnode to locate 1968 * @namelen: number of characters of name to consider 1969 * 1970 * Identical to fdt_add_subnode(), but use only the first namelen 1971 * characters of name as the name of the new node. This is useful for 1972 * creating subnodes based on a portion of a larger string, such as a 1973 * full path. 1974 */ 1975 #ifndef SWIG /* Not available in Python */ 1976 int fdt_add_subnode_namelen(void *fdt, int parentoffset, 1977 const char *name, int namelen); 1978 #endif 1979 1980 /** 1981 * fdt_add_subnode - creates a new node 1982 * @fdt: pointer to the device tree blob 1983 * @parentoffset: structure block offset of a node 1984 * @name: name of the subnode to locate 1985 * 1986 * fdt_add_subnode() creates a new node as a subnode of the node at 1987 * structure block offset parentoffset, with the given name (which 1988 * should include the unit address, if any). 1989 * 1990 * This function will insert data into the blob, and will therefore 1991 * change the offsets of some existing nodes. 1992 1993 * returns: 1994 * structure block offset of the created nodeequested subnode (>=0), on 1995 * success 1996 * -FDT_ERR_NOTFOUND, if the requested subnode does not exist 1997 * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE 1998 * tag 1999 * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of 2000 * the given name 2001 * -FDT_ERR_NOSPACE, if there is insufficient free space in the 2002 * blob to contain the new node 2003 * -FDT_ERR_NOSPACE 2004 * -FDT_ERR_BADLAYOUT 2005 * -FDT_ERR_BADMAGIC, 2006 * -FDT_ERR_BADVERSION, 2007 * -FDT_ERR_BADSTATE, 2008 * -FDT_ERR_BADSTRUCTURE, 2009 * -FDT_ERR_TRUNCATED, standard meanings. 2010 */ 2011 int fdt_add_subnode(void *fdt, int parentoffset, const char *name); 2012 2013 /** 2014 * fdt_del_node - delete a node (subtree) 2015 * @fdt: pointer to the device tree blob 2016 * @nodeoffset: offset of the node to nop 2017 * 2018 * fdt_del_node() will remove the given node, including all its 2019 * subnodes if any, from the blob. 2020 * 2021 * This function will delete data from the blob, and will therefore 2022 * change the offsets of some existing nodes. 2023 * 2024 * returns: 2025 * 0, on success 2026 * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag 2027 * -FDT_ERR_BADLAYOUT, 2028 * -FDT_ERR_BADMAGIC, 2029 * -FDT_ERR_BADVERSION, 2030 * -FDT_ERR_BADSTATE, 2031 * -FDT_ERR_BADSTRUCTURE, 2032 * -FDT_ERR_TRUNCATED, standard meanings 2033 */ 2034 int fdt_del_node(void *fdt, int nodeoffset); 2035 2036 /** 2037 * fdt_overlay_apply - Applies a DT overlay on a base DT 2038 * @fdt: pointer to the base device tree blob 2039 * @fdto: pointer to the device tree overlay blob 2040 * 2041 * fdt_overlay_apply() will apply the given device tree overlay on the 2042 * given base device tree. 2043 * 2044 * Expect the base device tree to be modified, even if the function 2045 * returns an error. 2046 * 2047 * returns: 2048 * 0, on success 2049 * -FDT_ERR_NOSPACE, there's not enough space in the base device tree 2050 * -FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or 2051 * properties in the base DT 2052 * -FDT_ERR_BADPHANDLE, 2053 * -FDT_ERR_BADOVERLAY, 2054 * -FDT_ERR_NOPHANDLES, 2055 * -FDT_ERR_INTERNAL, 2056 * -FDT_ERR_BADLAYOUT, 2057 * -FDT_ERR_BADMAGIC, 2058 * -FDT_ERR_BADOFFSET, 2059 * -FDT_ERR_BADPATH, 2060 * -FDT_ERR_BADVERSION, 2061 * -FDT_ERR_BADSTRUCTURE, 2062 * -FDT_ERR_BADSTATE, 2063 * -FDT_ERR_TRUNCATED, standard meanings 2064 */ 2065 int fdt_overlay_apply(void *fdt, void *fdto); 2066 2067 /**********************************************************************/ 2068 /* Debugging / informational functions */ 2069 /**********************************************************************/ 2070 2071 const char *fdt_strerror(int errval); 2072 2073 #endif /* LIBFDT_H */ 2074