1 /* $NetBSD: xhci.c,v 1.91 2018/05/02 09:55:22 jmcneill Exp $ */ 2 3 /* 4 * Copyright (c) 2013 Jonathan A. Kollasch 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 17 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 18 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 19 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 20 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 21 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 22 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; 23 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, 24 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR 25 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 26 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 /* 30 * USB rev 2.0 and rev 3.1 specification 31 * http://www.usb.org/developers/docs/ 32 * xHCI rev 1.1 specification 33 * http://www.intel.com/technology/usb/spec.htm 34 */ 35 36 #include <sys/cdefs.h> 37 __KERNEL_RCSID(0, "$NetBSD: xhci.c,v 1.91 2018/05/02 09:55:22 jmcneill Exp $"); 38 39 #ifdef _KERNEL_OPT 40 #include "opt_usb.h" 41 #endif 42 43 #include <sys/param.h> 44 #include <sys/systm.h> 45 #include <sys/kernel.h> 46 #include <sys/kmem.h> 47 #include <sys/device.h> 48 #include <sys/select.h> 49 #include <sys/proc.h> 50 #include <sys/queue.h> 51 #include <sys/mutex.h> 52 #include <sys/condvar.h> 53 #include <sys/bus.h> 54 #include <sys/cpu.h> 55 #include <sys/sysctl.h> 56 57 #include <machine/endian.h> 58 59 #include <dev/usb/usb.h> 60 #include <dev/usb/usbdi.h> 61 #include <dev/usb/usbdivar.h> 62 #include <dev/usb/usbdi_util.h> 63 #include <dev/usb/usbhist.h> 64 #include <dev/usb/usb_mem.h> 65 #include <dev/usb/usb_quirks.h> 66 67 #include <dev/usb/xhcireg.h> 68 #include <dev/usb/xhcivar.h> 69 #include <dev/usb/usbroothub.h> 70 71 72 #ifdef USB_DEBUG 73 #ifndef XHCI_DEBUG 74 #define xhcidebug 0 75 #else /* !XHCI_DEBUG */ 76 #define HEXDUMP(a, b, c) \ 77 do { \ 78 if (xhcidebug > 0) \ 79 hexdump(printf, a, b, c); \ 80 } while (/*CONSTCOND*/0) 81 static int xhcidebug = 0; 82 83 SYSCTL_SETUP(sysctl_hw_xhci_setup, "sysctl hw.xhci setup") 84 { 85 int err; 86 const struct sysctlnode *rnode; 87 const struct sysctlnode *cnode; 88 89 err = sysctl_createv(clog, 0, NULL, &rnode, 90 CTLFLAG_PERMANENT, CTLTYPE_NODE, "xhci", 91 SYSCTL_DESCR("xhci global controls"), 92 NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL); 93 94 if (err) 95 goto fail; 96 97 /* control debugging printfs */ 98 err = sysctl_createv(clog, 0, &rnode, &cnode, 99 CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_INT, 100 "debug", SYSCTL_DESCR("Enable debugging output"), 101 NULL, 0, &xhcidebug, sizeof(xhcidebug), CTL_CREATE, CTL_EOL); 102 if (err) 103 goto fail; 104 105 return; 106 fail: 107 aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err); 108 } 109 110 #endif /* !XHCI_DEBUG */ 111 #endif /* USB_DEBUG */ 112 113 #ifndef HEXDUMP 114 #define HEXDUMP(a, b, c) 115 #endif 116 117 #define DPRINTFN(N,FMT,A,B,C,D) USBHIST_LOGN(xhcidebug,N,FMT,A,B,C,D) 118 #define XHCIHIST_FUNC() USBHIST_FUNC() 119 #define XHCIHIST_CALLED(name) USBHIST_CALLED(xhcidebug) 120 121 #define XHCI_DCI_SLOT 0 122 #define XHCI_DCI_EP_CONTROL 1 123 124 #define XHCI_ICI_INPUT_CONTROL 0 125 126 struct xhci_pipe { 127 struct usbd_pipe xp_pipe; 128 struct usb_task xp_async_task; 129 }; 130 131 #define XHCI_COMMAND_RING_TRBS 256 132 #define XHCI_EVENT_RING_TRBS 256 133 #define XHCI_EVENT_RING_SEGMENTS 1 134 #define XHCI_TRB_3_ED_BIT XHCI_TRB_3_ISP_BIT 135 136 static usbd_status xhci_open(struct usbd_pipe *); 137 static void xhci_close_pipe(struct usbd_pipe *); 138 static int xhci_intr1(struct xhci_softc * const); 139 static void xhci_softintr(void *); 140 static void xhci_poll(struct usbd_bus *); 141 static struct usbd_xfer *xhci_allocx(struct usbd_bus *, unsigned int); 142 static void xhci_freex(struct usbd_bus *, struct usbd_xfer *); 143 static void xhci_get_lock(struct usbd_bus *, kmutex_t **); 144 static usbd_status xhci_new_device(device_t, struct usbd_bus *, int, int, int, 145 struct usbd_port *); 146 static int xhci_roothub_ctrl(struct usbd_bus *, usb_device_request_t *, 147 void *, int); 148 149 static usbd_status xhci_configure_endpoint(struct usbd_pipe *); 150 //static usbd_status xhci_unconfigure_endpoint(struct usbd_pipe *); 151 static usbd_status xhci_reset_endpoint(struct usbd_pipe *); 152 static usbd_status xhci_stop_endpoint(struct usbd_pipe *); 153 154 static void xhci_host_dequeue(struct xhci_ring * const); 155 static usbd_status xhci_set_dequeue(struct usbd_pipe *); 156 157 static usbd_status xhci_do_command(struct xhci_softc * const, 158 struct xhci_trb * const, int); 159 static usbd_status xhci_do_command_locked(struct xhci_softc * const, 160 struct xhci_trb * const, int); 161 static usbd_status xhci_init_slot(struct usbd_device *, uint32_t); 162 static void xhci_free_slot(struct xhci_softc *, struct xhci_slot *, int, int); 163 static usbd_status xhci_set_address(struct usbd_device *, uint32_t, bool); 164 static usbd_status xhci_enable_slot(struct xhci_softc * const, 165 uint8_t * const); 166 static usbd_status xhci_disable_slot(struct xhci_softc * const, uint8_t); 167 static usbd_status xhci_address_device(struct xhci_softc * const, 168 uint64_t, uint8_t, bool); 169 static void xhci_set_dcba(struct xhci_softc * const, uint64_t, int); 170 static usbd_status xhci_update_ep0_mps(struct xhci_softc * const, 171 struct xhci_slot * const, u_int); 172 static usbd_status xhci_ring_init(struct xhci_softc * const, 173 struct xhci_ring * const, size_t, size_t); 174 static void xhci_ring_free(struct xhci_softc * const, struct xhci_ring * const); 175 176 static void xhci_setup_ctx(struct usbd_pipe *); 177 static void xhci_setup_route(struct usbd_pipe *, uint32_t *); 178 static void xhci_setup_tthub(struct usbd_pipe *, uint32_t *); 179 static void xhci_setup_maxburst(struct usbd_pipe *, uint32_t *); 180 static uint32_t xhci_bival2ival(uint32_t, uint32_t); 181 182 static void xhci_noop(struct usbd_pipe *); 183 184 static usbd_status xhci_root_intr_transfer(struct usbd_xfer *); 185 static usbd_status xhci_root_intr_start(struct usbd_xfer *); 186 static void xhci_root_intr_abort(struct usbd_xfer *); 187 static void xhci_root_intr_close(struct usbd_pipe *); 188 static void xhci_root_intr_done(struct usbd_xfer *); 189 190 static usbd_status xhci_device_ctrl_transfer(struct usbd_xfer *); 191 static usbd_status xhci_device_ctrl_start(struct usbd_xfer *); 192 static void xhci_device_ctrl_abort(struct usbd_xfer *); 193 static void xhci_device_ctrl_close(struct usbd_pipe *); 194 static void xhci_device_ctrl_done(struct usbd_xfer *); 195 196 static usbd_status xhci_device_intr_transfer(struct usbd_xfer *); 197 static usbd_status xhci_device_intr_start(struct usbd_xfer *); 198 static void xhci_device_intr_abort(struct usbd_xfer *); 199 static void xhci_device_intr_close(struct usbd_pipe *); 200 static void xhci_device_intr_done(struct usbd_xfer *); 201 202 static usbd_status xhci_device_bulk_transfer(struct usbd_xfer *); 203 static usbd_status xhci_device_bulk_start(struct usbd_xfer *); 204 static void xhci_device_bulk_abort(struct usbd_xfer *); 205 static void xhci_device_bulk_close(struct usbd_pipe *); 206 static void xhci_device_bulk_done(struct usbd_xfer *); 207 208 static void xhci_timeout(void *); 209 static void xhci_timeout_task(void *); 210 211 static const struct usbd_bus_methods xhci_bus_methods = { 212 .ubm_open = xhci_open, 213 .ubm_softint = xhci_softintr, 214 .ubm_dopoll = xhci_poll, 215 .ubm_allocx = xhci_allocx, 216 .ubm_freex = xhci_freex, 217 .ubm_getlock = xhci_get_lock, 218 .ubm_newdev = xhci_new_device, 219 .ubm_rhctrl = xhci_roothub_ctrl, 220 }; 221 222 static const struct usbd_pipe_methods xhci_root_intr_methods = { 223 .upm_transfer = xhci_root_intr_transfer, 224 .upm_start = xhci_root_intr_start, 225 .upm_abort = xhci_root_intr_abort, 226 .upm_close = xhci_root_intr_close, 227 .upm_cleartoggle = xhci_noop, 228 .upm_done = xhci_root_intr_done, 229 }; 230 231 232 static const struct usbd_pipe_methods xhci_device_ctrl_methods = { 233 .upm_transfer = xhci_device_ctrl_transfer, 234 .upm_start = xhci_device_ctrl_start, 235 .upm_abort = xhci_device_ctrl_abort, 236 .upm_close = xhci_device_ctrl_close, 237 .upm_cleartoggle = xhci_noop, 238 .upm_done = xhci_device_ctrl_done, 239 }; 240 241 static const struct usbd_pipe_methods xhci_device_isoc_methods = { 242 .upm_cleartoggle = xhci_noop, 243 }; 244 245 static const struct usbd_pipe_methods xhci_device_bulk_methods = { 246 .upm_transfer = xhci_device_bulk_transfer, 247 .upm_start = xhci_device_bulk_start, 248 .upm_abort = xhci_device_bulk_abort, 249 .upm_close = xhci_device_bulk_close, 250 .upm_cleartoggle = xhci_noop, 251 .upm_done = xhci_device_bulk_done, 252 }; 253 254 static const struct usbd_pipe_methods xhci_device_intr_methods = { 255 .upm_transfer = xhci_device_intr_transfer, 256 .upm_start = xhci_device_intr_start, 257 .upm_abort = xhci_device_intr_abort, 258 .upm_close = xhci_device_intr_close, 259 .upm_cleartoggle = xhci_noop, 260 .upm_done = xhci_device_intr_done, 261 }; 262 263 static inline uint32_t 264 xhci_read_1(const struct xhci_softc * const sc, bus_size_t offset) 265 { 266 return bus_space_read_1(sc->sc_iot, sc->sc_ioh, offset); 267 } 268 269 static inline uint32_t 270 xhci_read_4(const struct xhci_softc * const sc, bus_size_t offset) 271 { 272 return bus_space_read_4(sc->sc_iot, sc->sc_ioh, offset); 273 } 274 275 static inline void 276 xhci_write_1(const struct xhci_softc * const sc, bus_size_t offset, 277 uint32_t value) 278 { 279 bus_space_write_1(sc->sc_iot, sc->sc_ioh, offset, value); 280 } 281 282 #if 0 /* unused */ 283 static inline void 284 xhci_write_4(const struct xhci_softc * const sc, bus_size_t offset, 285 uint32_t value) 286 { 287 bus_space_write_4(sc->sc_iot, sc->sc_ioh, offset, value); 288 } 289 #endif /* unused */ 290 291 static inline uint32_t 292 xhci_cap_read_4(const struct xhci_softc * const sc, bus_size_t offset) 293 { 294 return bus_space_read_4(sc->sc_iot, sc->sc_cbh, offset); 295 } 296 297 static inline uint32_t 298 xhci_op_read_4(const struct xhci_softc * const sc, bus_size_t offset) 299 { 300 return bus_space_read_4(sc->sc_iot, sc->sc_obh, offset); 301 } 302 303 static inline void 304 xhci_op_write_4(const struct xhci_softc * const sc, bus_size_t offset, 305 uint32_t value) 306 { 307 bus_space_write_4(sc->sc_iot, sc->sc_obh, offset, value); 308 } 309 310 static inline uint64_t 311 xhci_op_read_8(const struct xhci_softc * const sc, bus_size_t offset) 312 { 313 uint64_t value; 314 315 if (sc->sc_ac64) { 316 #ifdef XHCI_USE_BUS_SPACE_8 317 value = bus_space_read_8(sc->sc_iot, sc->sc_obh, offset); 318 #else 319 value = bus_space_read_4(sc->sc_iot, sc->sc_obh, offset); 320 value |= (uint64_t)bus_space_read_4(sc->sc_iot, sc->sc_obh, 321 offset + 4) << 32; 322 #endif 323 } else { 324 value = bus_space_read_4(sc->sc_iot, sc->sc_obh, offset); 325 } 326 327 return value; 328 } 329 330 static inline void 331 xhci_op_write_8(const struct xhci_softc * const sc, bus_size_t offset, 332 uint64_t value) 333 { 334 if (sc->sc_ac64) { 335 #ifdef XHCI_USE_BUS_SPACE_8 336 bus_space_write_8(sc->sc_iot, sc->sc_obh, offset, value); 337 #else 338 bus_space_write_4(sc->sc_iot, sc->sc_obh, offset + 0, 339 (value >> 0) & 0xffffffff); 340 bus_space_write_4(sc->sc_iot, sc->sc_obh, offset + 4, 341 (value >> 32) & 0xffffffff); 342 #endif 343 } else { 344 bus_space_write_4(sc->sc_iot, sc->sc_obh, offset, value); 345 } 346 } 347 348 static inline uint32_t 349 xhci_rt_read_4(const struct xhci_softc * const sc, bus_size_t offset) 350 { 351 return bus_space_read_4(sc->sc_iot, sc->sc_rbh, offset); 352 } 353 354 static inline void 355 xhci_rt_write_4(const struct xhci_softc * const sc, bus_size_t offset, 356 uint32_t value) 357 { 358 bus_space_write_4(sc->sc_iot, sc->sc_rbh, offset, value); 359 } 360 361 #if 0 /* unused */ 362 static inline uint64_t 363 xhci_rt_read_8(const struct xhci_softc * const sc, bus_size_t offset) 364 { 365 uint64_t value; 366 367 if (sc->sc_ac64) { 368 #ifdef XHCI_USE_BUS_SPACE_8 369 value = bus_space_read_8(sc->sc_iot, sc->sc_rbh, offset); 370 #else 371 value = bus_space_read_4(sc->sc_iot, sc->sc_rbh, offset); 372 value |= (uint64_t)bus_space_read_4(sc->sc_iot, sc->sc_rbh, 373 offset + 4) << 32; 374 #endif 375 } else { 376 value = bus_space_read_4(sc->sc_iot, sc->sc_rbh, offset); 377 } 378 379 return value; 380 } 381 #endif /* unused */ 382 383 static inline void 384 xhci_rt_write_8(const struct xhci_softc * const sc, bus_size_t offset, 385 uint64_t value) 386 { 387 if (sc->sc_ac64) { 388 #ifdef XHCI_USE_BUS_SPACE_8 389 bus_space_write_8(sc->sc_iot, sc->sc_rbh, offset, value); 390 #else 391 bus_space_write_4(sc->sc_iot, sc->sc_rbh, offset + 0, 392 (value >> 0) & 0xffffffff); 393 bus_space_write_4(sc->sc_iot, sc->sc_rbh, offset + 4, 394 (value >> 32) & 0xffffffff); 395 #endif 396 } else { 397 bus_space_write_4(sc->sc_iot, sc->sc_rbh, offset, value); 398 } 399 } 400 401 #if 0 /* unused */ 402 static inline uint32_t 403 xhci_db_read_4(const struct xhci_softc * const sc, bus_size_t offset) 404 { 405 return bus_space_read_4(sc->sc_iot, sc->sc_dbh, offset); 406 } 407 #endif /* unused */ 408 409 static inline void 410 xhci_db_write_4(const struct xhci_softc * const sc, bus_size_t offset, 411 uint32_t value) 412 { 413 bus_space_write_4(sc->sc_iot, sc->sc_dbh, offset, value); 414 } 415 416 /* --- */ 417 418 static inline uint8_t 419 xhci_ep_get_type(usb_endpoint_descriptor_t * const ed) 420 { 421 u_int eptype = 0; 422 423 switch (UE_GET_XFERTYPE(ed->bmAttributes)) { 424 case UE_CONTROL: 425 eptype = 0x0; 426 break; 427 case UE_ISOCHRONOUS: 428 eptype = 0x1; 429 break; 430 case UE_BULK: 431 eptype = 0x2; 432 break; 433 case UE_INTERRUPT: 434 eptype = 0x3; 435 break; 436 } 437 438 if ((UE_GET_XFERTYPE(ed->bmAttributes) == UE_CONTROL) || 439 (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN)) 440 return eptype | 0x4; 441 else 442 return eptype; 443 } 444 445 static u_int 446 xhci_ep_get_dci(usb_endpoint_descriptor_t * const ed) 447 { 448 /* xHCI 1.0 section 4.5.1 */ 449 u_int epaddr = UE_GET_ADDR(ed->bEndpointAddress); 450 u_int in = 0; 451 452 if ((UE_GET_XFERTYPE(ed->bmAttributes) == UE_CONTROL) || 453 (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN)) 454 in = 1; 455 456 return epaddr * 2 + in; 457 } 458 459 static inline u_int 460 xhci_dci_to_ici(const u_int i) 461 { 462 return i + 1; 463 } 464 465 static inline void * 466 xhci_slot_get_dcv(struct xhci_softc * const sc, struct xhci_slot * const xs, 467 const u_int dci) 468 { 469 return KERNADDR(&xs->xs_dc_dma, sc->sc_ctxsz * dci); 470 } 471 472 #if 0 /* unused */ 473 static inline bus_addr_t 474 xhci_slot_get_dcp(struct xhci_softc * const sc, struct xhci_slot * const xs, 475 const u_int dci) 476 { 477 return DMAADDR(&xs->xs_dc_dma, sc->sc_ctxsz * dci); 478 } 479 #endif /* unused */ 480 481 static inline void * 482 xhci_slot_get_icv(struct xhci_softc * const sc, struct xhci_slot * const xs, 483 const u_int ici) 484 { 485 return KERNADDR(&xs->xs_ic_dma, sc->sc_ctxsz * ici); 486 } 487 488 static inline bus_addr_t 489 xhci_slot_get_icp(struct xhci_softc * const sc, struct xhci_slot * const xs, 490 const u_int ici) 491 { 492 return DMAADDR(&xs->xs_ic_dma, sc->sc_ctxsz * ici); 493 } 494 495 static inline struct xhci_trb * 496 xhci_ring_trbv(struct xhci_ring * const xr, u_int idx) 497 { 498 return KERNADDR(&xr->xr_dma, XHCI_TRB_SIZE * idx); 499 } 500 501 static inline bus_addr_t 502 xhci_ring_trbp(struct xhci_ring * const xr, u_int idx) 503 { 504 return DMAADDR(&xr->xr_dma, XHCI_TRB_SIZE * idx); 505 } 506 507 static inline void 508 xhci_trb_put(struct xhci_trb * const trb, uint64_t parameter, uint32_t status, 509 uint32_t control) 510 { 511 trb->trb_0 = htole64(parameter); 512 trb->trb_2 = htole32(status); 513 trb->trb_3 = htole32(control); 514 } 515 516 static int 517 xhci_trb_get_idx(struct xhci_ring *xr, uint64_t trb_0, int *idx) 518 { 519 /* base address of TRBs */ 520 bus_addr_t trbp = xhci_ring_trbp(xr, 0); 521 522 /* trb_0 range sanity check */ 523 if (trb_0 == 0 || trb_0 < trbp || 524 (trb_0 - trbp) % sizeof(struct xhci_trb) != 0 || 525 (trb_0 - trbp) / sizeof(struct xhci_trb) >= xr->xr_ntrb) { 526 return 1; 527 } 528 *idx = (trb_0 - trbp) / sizeof(struct xhci_trb); 529 return 0; 530 } 531 532 static unsigned int 533 xhci_get_epstate(struct xhci_softc * const sc, struct xhci_slot * const xs, 534 u_int dci) 535 { 536 uint32_t *cp; 537 538 usb_syncmem(&xs->xs_dc_dma, 0, sc->sc_pgsz, BUS_DMASYNC_POSTREAD); 539 cp = xhci_slot_get_dcv(sc, xs, dci); 540 return XHCI_EPCTX_0_EPSTATE_GET(le32toh(cp[0])); 541 } 542 543 static inline unsigned int 544 xhci_ctlrport2bus(struct xhci_softc * const sc, unsigned int ctlrport) 545 { 546 const unsigned int port = ctlrport - 1; 547 const uint8_t bit = __BIT(port % NBBY); 548 549 return __SHIFTOUT(sc->sc_ctlrportbus[port / NBBY], bit); 550 } 551 552 /* 553 * Return the roothub port for a controller port. Both are 1..n. 554 */ 555 static inline unsigned int 556 xhci_ctlrport2rhport(struct xhci_softc * const sc, unsigned int ctrlport) 557 { 558 559 return sc->sc_ctlrportmap[ctrlport - 1]; 560 } 561 562 /* 563 * Return the controller port for a bus roothub port. Both are 1..n. 564 */ 565 static inline unsigned int 566 xhci_rhport2ctlrport(struct xhci_softc * const sc, unsigned int bn, 567 unsigned int rhport) 568 { 569 570 return sc->sc_rhportmap[bn][rhport - 1]; 571 } 572 573 /* --- */ 574 575 void 576 xhci_childdet(device_t self, device_t child) 577 { 578 struct xhci_softc * const sc = device_private(self); 579 580 KASSERT((sc->sc_child == child) || (sc->sc_child2 == child)); 581 if (child == sc->sc_child2) 582 sc->sc_child2 = NULL; 583 else if (child == sc->sc_child) 584 sc->sc_child = NULL; 585 } 586 587 int 588 xhci_detach(struct xhci_softc *sc, int flags) 589 { 590 int rv = 0; 591 592 if (sc->sc_child2 != NULL) { 593 rv = config_detach(sc->sc_child2, flags); 594 if (rv != 0) 595 return rv; 596 KASSERT(sc->sc_child2 == NULL); 597 } 598 599 if (sc->sc_child != NULL) { 600 rv = config_detach(sc->sc_child, flags); 601 if (rv != 0) 602 return rv; 603 KASSERT(sc->sc_child == NULL); 604 } 605 606 /* XXX unconfigure/free slots */ 607 608 /* verify: */ 609 xhci_rt_write_4(sc, XHCI_IMAN(0), 0); 610 xhci_op_write_4(sc, XHCI_USBCMD, 0); 611 /* do we need to wait for stop? */ 612 613 xhci_op_write_8(sc, XHCI_CRCR, 0); 614 xhci_ring_free(sc, &sc->sc_cr); 615 cv_destroy(&sc->sc_command_cv); 616 cv_destroy(&sc->sc_cmdbusy_cv); 617 618 xhci_rt_write_4(sc, XHCI_ERSTSZ(0), 0); 619 xhci_rt_write_8(sc, XHCI_ERSTBA(0), 0); 620 xhci_rt_write_8(sc, XHCI_ERDP(0), 0|XHCI_ERDP_LO_BUSY); 621 xhci_ring_free(sc, &sc->sc_er); 622 623 usb_freemem(&sc->sc_bus, &sc->sc_eventst_dma); 624 625 xhci_op_write_8(sc, XHCI_DCBAAP, 0); 626 usb_freemem(&sc->sc_bus, &sc->sc_dcbaa_dma); 627 628 kmem_free(sc->sc_slots, sizeof(*sc->sc_slots) * sc->sc_maxslots); 629 630 kmem_free(sc->sc_ctlrportbus, 631 howmany(sc->sc_maxports * sizeof(uint8_t), NBBY)); 632 kmem_free(sc->sc_ctlrportmap, sc->sc_maxports * sizeof(int)); 633 634 for (size_t j = 0; j < __arraycount(sc->sc_rhportmap); j++) { 635 kmem_free(sc->sc_rhportmap[j], sc->sc_maxports * sizeof(int)); 636 } 637 638 mutex_destroy(&sc->sc_lock); 639 mutex_destroy(&sc->sc_intr_lock); 640 641 pool_cache_destroy(sc->sc_xferpool); 642 643 return rv; 644 } 645 646 int 647 xhci_activate(device_t self, enum devact act) 648 { 649 struct xhci_softc * const sc = device_private(self); 650 651 switch (act) { 652 case DVACT_DEACTIVATE: 653 sc->sc_dying = true; 654 return 0; 655 default: 656 return EOPNOTSUPP; 657 } 658 } 659 660 bool 661 xhci_suspend(device_t dv, const pmf_qual_t *qual) 662 { 663 return false; 664 } 665 666 bool 667 xhci_resume(device_t dv, const pmf_qual_t *qual) 668 { 669 return false; 670 } 671 672 bool 673 xhci_shutdown(device_t self, int flags) 674 { 675 return false; 676 } 677 678 static int 679 xhci_hc_reset(struct xhci_softc * const sc) 680 { 681 uint32_t usbcmd, usbsts; 682 int i; 683 684 /* Check controller not ready */ 685 for (i = 0; i < XHCI_WAIT_CNR; i++) { 686 usbsts = xhci_op_read_4(sc, XHCI_USBSTS); 687 if ((usbsts & XHCI_STS_CNR) == 0) 688 break; 689 usb_delay_ms(&sc->sc_bus, 1); 690 } 691 if (i >= XHCI_WAIT_CNR) { 692 aprint_error_dev(sc->sc_dev, "controller not ready timeout\n"); 693 return EIO; 694 } 695 696 /* Halt controller */ 697 usbcmd = 0; 698 xhci_op_write_4(sc, XHCI_USBCMD, usbcmd); 699 usb_delay_ms(&sc->sc_bus, 1); 700 701 /* Reset controller */ 702 usbcmd = XHCI_CMD_HCRST; 703 xhci_op_write_4(sc, XHCI_USBCMD, usbcmd); 704 for (i = 0; i < XHCI_WAIT_HCRST; i++) { 705 /* 706 * Wait 1ms first. Existing Intel xHCI requies 1ms delay to 707 * prevent system hang (Errata). 708 */ 709 usb_delay_ms(&sc->sc_bus, 1); 710 usbcmd = xhci_op_read_4(sc, XHCI_USBCMD); 711 if ((usbcmd & XHCI_CMD_HCRST) == 0) 712 break; 713 } 714 if (i >= XHCI_WAIT_HCRST) { 715 aprint_error_dev(sc->sc_dev, "host controller reset timeout\n"); 716 return EIO; 717 } 718 719 /* Check controller not ready */ 720 for (i = 0; i < XHCI_WAIT_CNR; i++) { 721 usbsts = xhci_op_read_4(sc, XHCI_USBSTS); 722 if ((usbsts & XHCI_STS_CNR) == 0) 723 break; 724 usb_delay_ms(&sc->sc_bus, 1); 725 } 726 if (i >= XHCI_WAIT_CNR) { 727 aprint_error_dev(sc->sc_dev, 728 "controller not ready timeout after reset\n"); 729 return EIO; 730 } 731 732 return 0; 733 } 734 735 736 /* 7.2 xHCI Support Protocol Capability */ 737 static void 738 xhci_id_protocols(struct xhci_softc *sc, bus_size_t ecp) 739 { 740 /* XXX Cache this lot */ 741 742 const uint32_t w0 = xhci_read_4(sc, ecp); 743 const uint32_t w4 = xhci_read_4(sc, ecp + 4); 744 const uint32_t w8 = xhci_read_4(sc, ecp + 8); 745 const uint32_t wc = xhci_read_4(sc, ecp + 0xc); 746 747 aprint_debug_dev(sc->sc_dev, 748 " SP: %08x %08x %08x %08x\n", w0, w4, w8, wc); 749 750 if (w4 != XHCI_XECP_USBID) 751 return; 752 753 const int major = XHCI_XECP_SP_W0_MAJOR(w0); 754 const int minor = XHCI_XECP_SP_W0_MINOR(w0); 755 const uint8_t cpo = XHCI_XECP_SP_W8_CPO(w8); 756 const uint8_t cpc = XHCI_XECP_SP_W8_CPC(w8); 757 758 const uint16_t mm = __SHIFTOUT(w0, __BITS(31, 16)); 759 switch (mm) { 760 case 0x0200: 761 case 0x0300: 762 case 0x0301: 763 aprint_debug_dev(sc->sc_dev, " %s ports %d - %d\n", 764 major == 3 ? "ss" : "hs", cpo, cpo + cpc -1); 765 break; 766 default: 767 aprint_debug_dev(sc->sc_dev, " unknown major/minor (%d/%d)\n", 768 major, minor); 769 return; 770 } 771 772 const size_t bus = (major == 3) ? 0 : 1; 773 774 /* Index arrays with 0..n-1 where ports are numbered 1..n */ 775 for (size_t cp = cpo - 1; cp < cpo + cpc - 1; cp++) { 776 if (sc->sc_ctlrportmap[cp] != 0) { 777 aprint_error_dev(sc->sc_dev, "contoller port %zu " 778 "already assigned", cp); 779 continue; 780 } 781 782 sc->sc_ctlrportbus[cp / NBBY] |= 783 bus == 0 ? 0 : __BIT(cp % NBBY); 784 785 const size_t rhp = sc->sc_rhportcount[bus]++; 786 787 KASSERTMSG(sc->sc_rhportmap[bus][rhp] == 0, 788 "bus %zu rhp %zu is %d", bus, rhp, 789 sc->sc_rhportmap[bus][rhp]); 790 791 sc->sc_rhportmap[bus][rhp] = cp + 1; 792 sc->sc_ctlrportmap[cp] = rhp + 1; 793 } 794 } 795 796 /* Process extended capabilities */ 797 static void 798 xhci_ecp(struct xhci_softc *sc, uint32_t hcc) 799 { 800 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 801 802 bus_size_t ecp = XHCI_HCC_XECP(hcc) * 4; 803 while (ecp != 0) { 804 uint32_t ecr = xhci_read_4(sc, ecp); 805 aprint_debug_dev(sc->sc_dev, "ECR: 0x%08x\n", ecr); 806 switch (XHCI_XECP_ID(ecr)) { 807 case XHCI_ID_PROTOCOLS: { 808 xhci_id_protocols(sc, ecp); 809 break; 810 } 811 case XHCI_ID_USB_LEGACY: { 812 uint8_t bios_sem; 813 814 /* Take host controller ownership from BIOS */ 815 bios_sem = xhci_read_1(sc, ecp + XHCI_XECP_BIOS_SEM); 816 if (bios_sem) { 817 /* sets xHCI to be owned by OS */ 818 xhci_write_1(sc, ecp + XHCI_XECP_OS_SEM, 1); 819 aprint_debug_dev(sc->sc_dev, 820 "waiting for BIOS to give up control\n"); 821 for (int i = 0; i < 5000; i++) { 822 bios_sem = xhci_read_1(sc, ecp + 823 XHCI_XECP_BIOS_SEM); 824 if (bios_sem == 0) 825 break; 826 DELAY(1000); 827 } 828 if (bios_sem) { 829 aprint_error_dev(sc->sc_dev, 830 "timed out waiting for BIOS\n"); 831 } 832 } 833 break; 834 } 835 default: 836 break; 837 } 838 ecr = xhci_read_4(sc, ecp); 839 if (XHCI_XECP_NEXT(ecr) == 0) { 840 ecp = 0; 841 } else { 842 ecp += XHCI_XECP_NEXT(ecr) * 4; 843 } 844 } 845 } 846 847 #define XHCI_HCCPREV1_BITS \ 848 "\177\020" /* New bitmask */ \ 849 "f\020\020XECP\0" \ 850 "f\014\4MAXPSA\0" \ 851 "b\013CFC\0" \ 852 "b\012SEC\0" \ 853 "b\011SBD\0" \ 854 "b\010FSE\0" \ 855 "b\7NSS\0" \ 856 "b\6LTC\0" \ 857 "b\5LHRC\0" \ 858 "b\4PIND\0" \ 859 "b\3PPC\0" \ 860 "b\2CZC\0" \ 861 "b\1BNC\0" \ 862 "b\0AC64\0" \ 863 "\0" 864 #define XHCI_HCCV1_x_BITS \ 865 "\177\020" /* New bitmask */ \ 866 "f\020\020XECP\0" \ 867 "f\014\4MAXPSA\0" \ 868 "b\013CFC\0" \ 869 "b\012SEC\0" \ 870 "b\011SPC\0" \ 871 "b\010PAE\0" \ 872 "b\7NSS\0" \ 873 "b\6LTC\0" \ 874 "b\5LHRC\0" \ 875 "b\4PIND\0" \ 876 "b\3PPC\0" \ 877 "b\2CSZ\0" \ 878 "b\1BNC\0" \ 879 "b\0AC64\0" \ 880 "\0" 881 882 void 883 xhci_start(struct xhci_softc *sc) 884 { 885 xhci_rt_write_4(sc, XHCI_IMAN(0), XHCI_IMAN_INTR_ENA); 886 if ((sc->sc_quirks & XHCI_QUIRK_INTEL) != 0) 887 /* Intel xhci needs interrupt rate moderated. */ 888 xhci_rt_write_4(sc, XHCI_IMOD(0), XHCI_IMOD_DEFAULT_LP); 889 else 890 xhci_rt_write_4(sc, XHCI_IMOD(0), 0); 891 aprint_debug_dev(sc->sc_dev, "current IMOD %u\n", 892 xhci_rt_read_4(sc, XHCI_IMOD(0))); 893 894 xhci_op_write_4(sc, XHCI_USBCMD, XHCI_CMD_INTE|XHCI_CMD_RS); /* Go! */ 895 aprint_debug_dev(sc->sc_dev, "USBCMD %08"PRIx32"\n", 896 xhci_op_read_4(sc, XHCI_USBCMD)); 897 } 898 899 int 900 xhci_init(struct xhci_softc *sc) 901 { 902 bus_size_t bsz; 903 uint32_t cap, hcs1, hcs2, hcs3, hcc, dboff, rtsoff; 904 uint32_t pagesize, config; 905 int i = 0; 906 uint16_t hciversion; 907 uint8_t caplength; 908 909 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 910 911 /* Set up the bus struct for the usb 3 and usb 2 buses */ 912 sc->sc_bus.ub_methods = &xhci_bus_methods; 913 sc->sc_bus.ub_pipesize = sizeof(struct xhci_pipe); 914 sc->sc_bus.ub_revision = USBREV_3_0; 915 sc->sc_bus.ub_usedma = true; 916 sc->sc_bus.ub_hcpriv = sc; 917 918 sc->sc_bus2.ub_methods = &xhci_bus_methods; 919 sc->sc_bus2.ub_pipesize = sizeof(struct xhci_pipe); 920 sc->sc_bus2.ub_revision = USBREV_2_0; 921 sc->sc_bus2.ub_usedma = true; 922 sc->sc_bus2.ub_hcpriv = sc; 923 sc->sc_bus2.ub_dmatag = sc->sc_bus.ub_dmatag; 924 925 cap = xhci_read_4(sc, XHCI_CAPLENGTH); 926 caplength = XHCI_CAP_CAPLENGTH(cap); 927 hciversion = XHCI_CAP_HCIVERSION(cap); 928 929 if (hciversion < XHCI_HCIVERSION_0_96 || 930 hciversion > XHCI_HCIVERSION_1_0) { 931 aprint_normal_dev(sc->sc_dev, 932 "xHCI version %x.%x not known to be supported\n", 933 (hciversion >> 8) & 0xff, (hciversion >> 0) & 0xff); 934 } else { 935 aprint_verbose_dev(sc->sc_dev, "xHCI version %x.%x\n", 936 (hciversion >> 8) & 0xff, (hciversion >> 0) & 0xff); 937 } 938 939 if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, 0, caplength, 940 &sc->sc_cbh) != 0) { 941 aprint_error_dev(sc->sc_dev, "capability subregion failure\n"); 942 return ENOMEM; 943 } 944 945 hcs1 = xhci_cap_read_4(sc, XHCI_HCSPARAMS1); 946 sc->sc_maxslots = XHCI_HCS1_MAXSLOTS(hcs1); 947 sc->sc_maxintrs = XHCI_HCS1_MAXINTRS(hcs1); 948 sc->sc_maxports = XHCI_HCS1_MAXPORTS(hcs1); 949 hcs2 = xhci_cap_read_4(sc, XHCI_HCSPARAMS2); 950 hcs3 = xhci_cap_read_4(sc, XHCI_HCSPARAMS3); 951 aprint_debug_dev(sc->sc_dev, 952 "hcs1=%"PRIx32" hcs2=%"PRIx32" hcs3=%"PRIx32"\n", hcs1, hcs2, hcs3); 953 954 hcc = xhci_cap_read_4(sc, XHCI_HCCPARAMS); 955 sc->sc_ac64 = XHCI_HCC_AC64(hcc); 956 sc->sc_ctxsz = XHCI_HCC_CSZ(hcc) ? 64 : 32; 957 958 char sbuf[128]; 959 if (hciversion < XHCI_HCIVERSION_1_0) 960 snprintb(sbuf, sizeof(sbuf), XHCI_HCCPREV1_BITS, hcc); 961 else 962 snprintb(sbuf, sizeof(sbuf), XHCI_HCCV1_x_BITS, hcc); 963 aprint_debug_dev(sc->sc_dev, "hcc=%s\n", sbuf); 964 aprint_debug_dev(sc->sc_dev, "xECP %x\n", XHCI_HCC_XECP(hcc) * 4); 965 966 /* default all ports to bus 0, i.e. usb 3 */ 967 sc->sc_ctlrportbus = kmem_zalloc( 968 howmany(sc->sc_maxports * sizeof(uint8_t), NBBY), KM_SLEEP); 969 sc->sc_ctlrportmap = kmem_zalloc(sc->sc_maxports * sizeof(int), KM_SLEEP); 970 971 /* controller port to bus roothub port map */ 972 for (size_t j = 0; j < __arraycount(sc->sc_rhportmap); j++) { 973 sc->sc_rhportmap[j] = kmem_zalloc(sc->sc_maxports * sizeof(int), KM_SLEEP); 974 } 975 976 /* 977 * Process all Extended Capabilities 978 */ 979 xhci_ecp(sc, hcc); 980 981 bsz = XHCI_PORTSC(sc->sc_maxports); 982 if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, caplength, bsz, 983 &sc->sc_obh) != 0) { 984 aprint_error_dev(sc->sc_dev, "operational subregion failure\n"); 985 return ENOMEM; 986 } 987 988 dboff = xhci_cap_read_4(sc, XHCI_DBOFF); 989 if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, dboff, 990 sc->sc_maxslots * 4, &sc->sc_dbh) != 0) { 991 aprint_error_dev(sc->sc_dev, "doorbell subregion failure\n"); 992 return ENOMEM; 993 } 994 995 rtsoff = xhci_cap_read_4(sc, XHCI_RTSOFF); 996 if (bus_space_subregion(sc->sc_iot, sc->sc_ioh, rtsoff, 997 sc->sc_maxintrs * 0x20, &sc->sc_rbh) != 0) { 998 aprint_error_dev(sc->sc_dev, "runtime subregion failure\n"); 999 return ENOMEM; 1000 } 1001 1002 int rv; 1003 rv = xhci_hc_reset(sc); 1004 if (rv != 0) { 1005 return rv; 1006 } 1007 1008 if (sc->sc_vendor_init) 1009 sc->sc_vendor_init(sc); 1010 1011 pagesize = xhci_op_read_4(sc, XHCI_PAGESIZE); 1012 aprint_debug_dev(sc->sc_dev, "PAGESIZE 0x%08x\n", pagesize); 1013 pagesize = ffs(pagesize); 1014 if (pagesize == 0) { 1015 aprint_error_dev(sc->sc_dev, "pagesize is 0\n"); 1016 return EIO; 1017 } 1018 sc->sc_pgsz = 1 << (12 + (pagesize - 1)); 1019 aprint_debug_dev(sc->sc_dev, "sc_pgsz 0x%08x\n", (uint32_t)sc->sc_pgsz); 1020 aprint_debug_dev(sc->sc_dev, "sc_maxslots 0x%08x\n", 1021 (uint32_t)sc->sc_maxslots); 1022 aprint_debug_dev(sc->sc_dev, "sc_maxports %d\n", sc->sc_maxports); 1023 1024 usbd_status err; 1025 1026 sc->sc_maxspbuf = XHCI_HCS2_MAXSPBUF(hcs2); 1027 aprint_debug_dev(sc->sc_dev, "sc_maxspbuf %d\n", sc->sc_maxspbuf); 1028 if (sc->sc_maxspbuf != 0) { 1029 err = usb_allocmem(&sc->sc_bus, 1030 sizeof(uint64_t) * sc->sc_maxspbuf, sizeof(uint64_t), 1031 &sc->sc_spbufarray_dma); 1032 if (err) { 1033 aprint_error_dev(sc->sc_dev, 1034 "spbufarray init fail, err %d\n", err); 1035 return ENOMEM; 1036 } 1037 1038 sc->sc_spbuf_dma = kmem_zalloc(sizeof(*sc->sc_spbuf_dma) * 1039 sc->sc_maxspbuf, KM_SLEEP); 1040 uint64_t *spbufarray = KERNADDR(&sc->sc_spbufarray_dma, 0); 1041 for (i = 0; i < sc->sc_maxspbuf; i++) { 1042 usb_dma_t * const dma = &sc->sc_spbuf_dma[i]; 1043 /* allocate contexts */ 1044 err = usb_allocmem(&sc->sc_bus, sc->sc_pgsz, 1045 sc->sc_pgsz, dma); 1046 if (err) { 1047 aprint_error_dev(sc->sc_dev, 1048 "spbufarray_dma init fail, err %d\n", err); 1049 rv = ENOMEM; 1050 goto bad1; 1051 } 1052 spbufarray[i] = htole64(DMAADDR(dma, 0)); 1053 usb_syncmem(dma, 0, sc->sc_pgsz, 1054 BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); 1055 } 1056 1057 usb_syncmem(&sc->sc_spbufarray_dma, 0, 1058 sizeof(uint64_t) * sc->sc_maxspbuf, BUS_DMASYNC_PREWRITE); 1059 } 1060 1061 config = xhci_op_read_4(sc, XHCI_CONFIG); 1062 config &= ~0xFF; 1063 config |= sc->sc_maxslots & 0xFF; 1064 xhci_op_write_4(sc, XHCI_CONFIG, config); 1065 1066 err = xhci_ring_init(sc, &sc->sc_cr, XHCI_COMMAND_RING_TRBS, 1067 XHCI_COMMAND_RING_SEGMENTS_ALIGN); 1068 if (err) { 1069 aprint_error_dev(sc->sc_dev, "command ring init fail, err %d\n", 1070 err); 1071 rv = ENOMEM; 1072 goto bad1; 1073 } 1074 1075 err = xhci_ring_init(sc, &sc->sc_er, XHCI_EVENT_RING_TRBS, 1076 XHCI_EVENT_RING_SEGMENTS_ALIGN); 1077 if (err) { 1078 aprint_error_dev(sc->sc_dev, "event ring init fail, err %d\n", 1079 err); 1080 rv = ENOMEM; 1081 goto bad2; 1082 } 1083 1084 usb_dma_t *dma; 1085 size_t size; 1086 size_t align; 1087 1088 dma = &sc->sc_eventst_dma; 1089 size = roundup2(XHCI_EVENT_RING_SEGMENTS * XHCI_ERSTE_SIZE, 1090 XHCI_EVENT_RING_SEGMENT_TABLE_ALIGN); 1091 KASSERTMSG(size <= (512 * 1024), "eventst size %zu too large", size); 1092 align = XHCI_EVENT_RING_SEGMENT_TABLE_ALIGN; 1093 err = usb_allocmem(&sc->sc_bus, size, align, dma); 1094 if (err) { 1095 aprint_error_dev(sc->sc_dev, "eventst init fail, err %d\n", 1096 err); 1097 rv = ENOMEM; 1098 goto bad3; 1099 } 1100 1101 memset(KERNADDR(dma, 0), 0, size); 1102 usb_syncmem(dma, 0, size, BUS_DMASYNC_PREWRITE); 1103 aprint_debug_dev(sc->sc_dev, "eventst: %016jx %p %zx\n", 1104 (uintmax_t)DMAADDR(&sc->sc_eventst_dma, 0), 1105 KERNADDR(&sc->sc_eventst_dma, 0), 1106 sc->sc_eventst_dma.udma_block->size); 1107 1108 dma = &sc->sc_dcbaa_dma; 1109 size = (1 + sc->sc_maxslots) * sizeof(uint64_t); 1110 KASSERTMSG(size <= 2048, "dcbaa size %zu too large", size); 1111 align = XHCI_DEVICE_CONTEXT_BASE_ADDRESS_ARRAY_ALIGN; 1112 err = usb_allocmem(&sc->sc_bus, size, align, dma); 1113 if (err) { 1114 aprint_error_dev(sc->sc_dev, "dcbaa init fail, err %d\n", err); 1115 rv = ENOMEM; 1116 goto bad4; 1117 } 1118 aprint_debug_dev(sc->sc_dev, "dcbaa: %016jx %p %zx\n", 1119 (uintmax_t)DMAADDR(&sc->sc_dcbaa_dma, 0), 1120 KERNADDR(&sc->sc_dcbaa_dma, 0), 1121 sc->sc_dcbaa_dma.udma_block->size); 1122 1123 memset(KERNADDR(dma, 0), 0, size); 1124 if (sc->sc_maxspbuf != 0) { 1125 /* 1126 * DCBA entry 0 hold the scratchbuf array pointer. 1127 */ 1128 *(uint64_t *)KERNADDR(dma, 0) = 1129 htole64(DMAADDR(&sc->sc_spbufarray_dma, 0)); 1130 } 1131 usb_syncmem(dma, 0, size, BUS_DMASYNC_PREWRITE); 1132 1133 sc->sc_slots = kmem_zalloc(sizeof(*sc->sc_slots) * sc->sc_maxslots, 1134 KM_SLEEP); 1135 if (sc->sc_slots == NULL) { 1136 aprint_error_dev(sc->sc_dev, "slots init fail, err %d\n", err); 1137 rv = ENOMEM; 1138 goto bad; 1139 } 1140 1141 sc->sc_xferpool = pool_cache_init(sizeof(struct xhci_xfer), 0, 0, 0, 1142 "xhcixfer", NULL, IPL_USB, NULL, NULL, NULL); 1143 if (sc->sc_xferpool == NULL) { 1144 aprint_error_dev(sc->sc_dev, "pool_cache init fail, err %d\n", 1145 err); 1146 rv = ENOMEM; 1147 goto bad; 1148 } 1149 1150 cv_init(&sc->sc_command_cv, "xhcicmd"); 1151 cv_init(&sc->sc_cmdbusy_cv, "xhcicmdq"); 1152 mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTUSB); 1153 mutex_init(&sc->sc_intr_lock, MUTEX_DEFAULT, IPL_USB); 1154 1155 struct xhci_erste *erst; 1156 erst = KERNADDR(&sc->sc_eventst_dma, 0); 1157 erst[0].erste_0 = htole64(xhci_ring_trbp(&sc->sc_er, 0)); 1158 erst[0].erste_2 = htole32(sc->sc_er.xr_ntrb); 1159 erst[0].erste_3 = htole32(0); 1160 usb_syncmem(&sc->sc_eventst_dma, 0, 1161 XHCI_ERSTE_SIZE * XHCI_EVENT_RING_SEGMENTS, BUS_DMASYNC_PREWRITE); 1162 1163 xhci_rt_write_4(sc, XHCI_ERSTSZ(0), XHCI_EVENT_RING_SEGMENTS); 1164 xhci_rt_write_8(sc, XHCI_ERSTBA(0), DMAADDR(&sc->sc_eventst_dma, 0)); 1165 xhci_rt_write_8(sc, XHCI_ERDP(0), xhci_ring_trbp(&sc->sc_er, 0) | 1166 XHCI_ERDP_LO_BUSY); 1167 xhci_op_write_8(sc, XHCI_DCBAAP, DMAADDR(&sc->sc_dcbaa_dma, 0)); 1168 xhci_op_write_8(sc, XHCI_CRCR, xhci_ring_trbp(&sc->sc_cr, 0) | 1169 sc->sc_cr.xr_cs); 1170 1171 HEXDUMP("eventst", KERNADDR(&sc->sc_eventst_dma, 0), 1172 XHCI_ERSTE_SIZE * XHCI_EVENT_RING_SEGMENTS); 1173 1174 if ((sc->sc_quirks & XHCI_DEFERRED_START) == 0) 1175 xhci_start(sc); 1176 1177 return 0; 1178 1179 bad: 1180 if (sc->sc_xferpool) { 1181 pool_cache_destroy(sc->sc_xferpool); 1182 sc->sc_xferpool = NULL; 1183 } 1184 1185 if (sc->sc_slots) { 1186 kmem_free(sc->sc_slots, sizeof(*sc->sc_slots) * 1187 sc->sc_maxslots); 1188 sc->sc_slots = NULL; 1189 } 1190 1191 usb_freemem(&sc->sc_bus, &sc->sc_dcbaa_dma); 1192 bad4: 1193 usb_freemem(&sc->sc_bus, &sc->sc_eventst_dma); 1194 bad3: 1195 xhci_ring_free(sc, &sc->sc_er); 1196 bad2: 1197 xhci_ring_free(sc, &sc->sc_cr); 1198 i = sc->sc_maxspbuf; 1199 bad1: 1200 for (int j = 0; j < i; j++) 1201 usb_freemem(&sc->sc_bus, &sc->sc_spbuf_dma[j]); 1202 usb_freemem(&sc->sc_bus, &sc->sc_spbufarray_dma); 1203 1204 return rv; 1205 } 1206 1207 static inline bool 1208 xhci_polling_p(struct xhci_softc * const sc) 1209 { 1210 return sc->sc_bus.ub_usepolling || sc->sc_bus2.ub_usepolling; 1211 } 1212 1213 int 1214 xhci_intr(void *v) 1215 { 1216 struct xhci_softc * const sc = v; 1217 int ret = 0; 1218 1219 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1220 1221 if (sc == NULL) 1222 return 0; 1223 1224 mutex_spin_enter(&sc->sc_intr_lock); 1225 1226 if (sc->sc_dying || !device_has_power(sc->sc_dev)) 1227 goto done; 1228 1229 /* If we get an interrupt while polling, then just ignore it. */ 1230 if (xhci_polling_p(sc)) { 1231 #ifdef DIAGNOSTIC 1232 DPRINTFN(16, "ignored interrupt while polling", 0, 0, 0, 0); 1233 #endif 1234 goto done; 1235 } 1236 1237 ret = xhci_intr1(sc); 1238 if (ret) { 1239 KASSERT(sc->sc_child || sc->sc_child2); 1240 1241 /* 1242 * One of child busses could be already detached. It doesn't 1243 * matter on which of the two the softintr is scheduled. 1244 */ 1245 if (sc->sc_child) 1246 usb_schedsoftintr(&sc->sc_bus); 1247 else 1248 usb_schedsoftintr(&sc->sc_bus2); 1249 } 1250 done: 1251 mutex_spin_exit(&sc->sc_intr_lock); 1252 return ret; 1253 } 1254 1255 int 1256 xhci_intr1(struct xhci_softc * const sc) 1257 { 1258 uint32_t usbsts; 1259 uint32_t iman; 1260 1261 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1262 1263 usbsts = xhci_op_read_4(sc, XHCI_USBSTS); 1264 DPRINTFN(16, "USBSTS %08jx", usbsts, 0, 0, 0); 1265 if ((usbsts & (XHCI_STS_HSE | XHCI_STS_EINT | XHCI_STS_PCD | 1266 XHCI_STS_HCE)) == 0) { 1267 DPRINTFN(16, "ignored intr not for %s", 1268 device_xname(sc->sc_dev), 0, 0, 0); 1269 return 0; 1270 } 1271 1272 /* 1273 * Clear EINT and other transient flags, to not misenterpret 1274 * next shared interrupt. Also, to avoid race, EINT must be cleared 1275 * before XHCI_IMAN_INTR_PEND is cleared. 1276 */ 1277 xhci_op_write_4(sc, XHCI_USBSTS, usbsts & XHCI_STS_RSVDP0); 1278 1279 #ifdef XHCI_DEBUG 1280 usbsts = xhci_op_read_4(sc, XHCI_USBSTS); 1281 DPRINTFN(16, "USBSTS %08jx", usbsts, 0, 0, 0); 1282 #endif 1283 1284 iman = xhci_rt_read_4(sc, XHCI_IMAN(0)); 1285 DPRINTFN(16, "IMAN0 %08jx", iman, 0, 0, 0); 1286 iman |= XHCI_IMAN_INTR_PEND; 1287 xhci_rt_write_4(sc, XHCI_IMAN(0), iman); 1288 1289 #ifdef XHCI_DEBUG 1290 iman = xhci_rt_read_4(sc, XHCI_IMAN(0)); 1291 DPRINTFN(16, "IMAN0 %08jx", iman, 0, 0, 0); 1292 usbsts = xhci_op_read_4(sc, XHCI_USBSTS); 1293 DPRINTFN(16, "USBSTS %08jx", usbsts, 0, 0, 0); 1294 #endif 1295 1296 return 1; 1297 } 1298 1299 /* 1300 * 3 port speed types used in USB stack 1301 * 1302 * usbdi speed 1303 * definition: USB_SPEED_* in usb.h 1304 * They are used in struct usbd_device in USB stack. 1305 * ioctl interface uses these values too. 1306 * port_status speed 1307 * definition: UPS_*_SPEED in usb.h 1308 * They are used in usb_port_status_t and valid only for USB 2.0. 1309 * Speed value is always 0 for Super Speed or more, and dwExtPortStatus 1310 * of usb_port_status_ext_t indicates port speed. 1311 * Note that some 3.0 values overlap with 2.0 values. 1312 * (e.g. 0x200 means UPS_POER_POWER_SS in SS and 1313 * means UPS_LOW_SPEED in HS.) 1314 * port status returned from hub also uses these values. 1315 * On NetBSD UPS_OTHER_SPEED indicates port speed is super speed 1316 * or more. 1317 * xspeed: 1318 * definition: Protocol Speed ID (PSI) (xHCI 1.1 7.2.1) 1319 * They are used in only slot context and PORTSC reg of xhci. 1320 * The difference between usbdi speed and xspeed is 1321 * that FS and LS values are swapped. 1322 */ 1323 1324 /* convert usbdi speed to xspeed */ 1325 static int 1326 xhci_speed2xspeed(int speed) 1327 { 1328 switch (speed) { 1329 case USB_SPEED_LOW: return 2; 1330 case USB_SPEED_FULL: return 1; 1331 default: return speed; 1332 } 1333 } 1334 1335 #if 0 1336 /* convert xspeed to usbdi speed */ 1337 static int 1338 xhci_xspeed2speed(int xspeed) 1339 { 1340 switch (xspeed) { 1341 case 1: return USB_SPEED_FULL; 1342 case 2: return USB_SPEED_LOW; 1343 default: return xspeed; 1344 } 1345 } 1346 #endif 1347 1348 /* convert xspeed to port status speed */ 1349 static int 1350 xhci_xspeed2psspeed(int xspeed) 1351 { 1352 switch (xspeed) { 1353 case 0: return 0; 1354 case 1: return UPS_FULL_SPEED; 1355 case 2: return UPS_LOW_SPEED; 1356 case 3: return UPS_HIGH_SPEED; 1357 default: return UPS_OTHER_SPEED; 1358 } 1359 } 1360 1361 /* 1362 * Construct input contexts and issue TRB to open pipe. 1363 */ 1364 static usbd_status 1365 xhci_configure_endpoint(struct usbd_pipe *pipe) 1366 { 1367 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 1368 struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; 1369 #ifdef USB_DEBUG 1370 const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); 1371 #endif 1372 struct xhci_trb trb; 1373 usbd_status err; 1374 1375 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1376 DPRINTFN(4, "slot %ju dci %ju epaddr 0x%02jx attr 0x%02jx", 1377 xs->xs_idx, dci, pipe->up_endpoint->ue_edesc->bEndpointAddress, 1378 pipe->up_endpoint->ue_edesc->bmAttributes); 1379 1380 /* XXX ensure input context is available? */ 1381 1382 memset(xhci_slot_get_icv(sc, xs, 0), 0, sc->sc_pgsz); 1383 1384 /* set up context */ 1385 xhci_setup_ctx(pipe); 1386 1387 HEXDUMP("input control context", xhci_slot_get_icv(sc, xs, 0), 1388 sc->sc_ctxsz * 1); 1389 HEXDUMP("input endpoint context", xhci_slot_get_icv(sc, xs, 1390 xhci_dci_to_ici(dci)), sc->sc_ctxsz * 1); 1391 1392 trb.trb_0 = xhci_slot_get_icp(sc, xs, 0); 1393 trb.trb_2 = 0; 1394 trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | 1395 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_CONFIGURE_EP); 1396 1397 err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); 1398 1399 usb_syncmem(&xs->xs_dc_dma, 0, sc->sc_pgsz, BUS_DMASYNC_POSTREAD); 1400 HEXDUMP("output context", xhci_slot_get_dcv(sc, xs, dci), 1401 sc->sc_ctxsz * 1); 1402 1403 return err; 1404 } 1405 1406 #if 0 1407 static usbd_status 1408 xhci_unconfigure_endpoint(struct usbd_pipe *pipe) 1409 { 1410 #ifdef USB_DEBUG 1411 struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; 1412 #endif 1413 1414 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1415 DPRINTFN(4, "slot %ju", xs->xs_idx, 0, 0, 0); 1416 1417 return USBD_NORMAL_COMPLETION; 1418 } 1419 #endif 1420 1421 /* 4.6.8, 6.4.3.7 */ 1422 static usbd_status 1423 xhci_reset_endpoint_locked(struct usbd_pipe *pipe) 1424 { 1425 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 1426 struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; 1427 const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); 1428 struct xhci_trb trb; 1429 usbd_status err; 1430 1431 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1432 DPRINTFN(4, "slot %ju dci %ju", xs->xs_idx, dci, 0, 0); 1433 1434 KASSERT(mutex_owned(&sc->sc_lock)); 1435 1436 trb.trb_0 = 0; 1437 trb.trb_2 = 0; 1438 trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | 1439 XHCI_TRB_3_EP_SET(dci) | 1440 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_RESET_EP); 1441 1442 err = xhci_do_command_locked(sc, &trb, USBD_DEFAULT_TIMEOUT); 1443 1444 return err; 1445 } 1446 1447 static usbd_status 1448 xhci_reset_endpoint(struct usbd_pipe *pipe) 1449 { 1450 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 1451 1452 mutex_enter(&sc->sc_lock); 1453 usbd_status ret = xhci_reset_endpoint_locked(pipe); 1454 mutex_exit(&sc->sc_lock); 1455 1456 return ret; 1457 } 1458 1459 /* 1460 * 4.6.9, 6.4.3.8 1461 * Stop execution of TDs on xfer ring. 1462 * Should be called with sc_lock held. 1463 */ 1464 static usbd_status 1465 xhci_stop_endpoint(struct usbd_pipe *pipe) 1466 { 1467 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 1468 struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; 1469 struct xhci_trb trb; 1470 usbd_status err; 1471 const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); 1472 1473 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1474 DPRINTFN(4, "slot %ju dci %ju", xs->xs_idx, dci, 0, 0); 1475 1476 KASSERT(mutex_owned(&sc->sc_lock)); 1477 1478 trb.trb_0 = 0; 1479 trb.trb_2 = 0; 1480 trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | 1481 XHCI_TRB_3_EP_SET(dci) | 1482 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_STOP_EP); 1483 1484 err = xhci_do_command_locked(sc, &trb, USBD_DEFAULT_TIMEOUT); 1485 1486 return err; 1487 } 1488 1489 /* 1490 * Set TR Dequeue Pointer. 1491 * xHCI 1.1 4.6.10 6.4.3.9 1492 * Purge all of the TRBs on ring and reinitialize ring. 1493 * Set TR dequeue Pointr to 0 and Cycle State to 1. 1494 * EPSTATE of endpoint must be ERROR or STOPPED, otherwise CONTEXT_STATE 1495 * error will be generated. 1496 */ 1497 static usbd_status 1498 xhci_set_dequeue_locked(struct usbd_pipe *pipe) 1499 { 1500 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 1501 struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; 1502 const u_int dci = xhci_ep_get_dci(pipe->up_endpoint->ue_edesc); 1503 struct xhci_ring * const xr = &xs->xs_ep[dci].xe_tr; 1504 struct xhci_trb trb; 1505 usbd_status err; 1506 1507 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1508 DPRINTFN(4, "slot %ju dci %ju", xs->xs_idx, dci, 0, 0); 1509 1510 KASSERT(mutex_owned(&sc->sc_lock)); 1511 1512 xhci_host_dequeue(xr); 1513 1514 /* set DCS */ 1515 trb.trb_0 = xhci_ring_trbp(xr, 0) | 1; /* XXX */ 1516 trb.trb_2 = 0; 1517 trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | 1518 XHCI_TRB_3_EP_SET(dci) | 1519 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_SET_TR_DEQUEUE); 1520 1521 err = xhci_do_command_locked(sc, &trb, USBD_DEFAULT_TIMEOUT); 1522 1523 return err; 1524 } 1525 1526 static usbd_status 1527 xhci_set_dequeue(struct usbd_pipe *pipe) 1528 { 1529 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 1530 1531 mutex_enter(&sc->sc_lock); 1532 usbd_status ret = xhci_set_dequeue_locked(pipe); 1533 mutex_exit(&sc->sc_lock); 1534 1535 return ret; 1536 } 1537 1538 /* 1539 * Open new pipe: called from usbd_setup_pipe_flags. 1540 * Fills methods of pipe. 1541 * If pipe is not for ep0, calls configure_endpoint. 1542 */ 1543 static usbd_status 1544 xhci_open(struct usbd_pipe *pipe) 1545 { 1546 struct usbd_device * const dev = pipe->up_dev; 1547 struct xhci_softc * const sc = XHCI_BUS2SC(dev->ud_bus); 1548 usb_endpoint_descriptor_t * const ed = pipe->up_endpoint->ue_edesc; 1549 const uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes); 1550 1551 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1552 DPRINTFN(1, "addr %jd depth %jd port %jd speed %jd", dev->ud_addr, 1553 dev->ud_depth, dev->ud_powersrc->up_portno, dev->ud_speed); 1554 DPRINTFN(1, " dci %ju type 0x%02jx epaddr 0x%02jx attr 0x%02jx", 1555 xhci_ep_get_dci(ed), ed->bDescriptorType, ed->bEndpointAddress, 1556 ed->bmAttributes); 1557 DPRINTFN(1, " mps %ju ival %ju", UGETW(ed->wMaxPacketSize), 1558 ed->bInterval, 0, 0); 1559 1560 if (sc->sc_dying) 1561 return USBD_IOERROR; 1562 1563 /* Root Hub */ 1564 if (dev->ud_depth == 0 && dev->ud_powersrc->up_portno == 0) { 1565 switch (ed->bEndpointAddress) { 1566 case USB_CONTROL_ENDPOINT: 1567 pipe->up_methods = &roothub_ctrl_methods; 1568 break; 1569 case UE_DIR_IN | USBROOTHUB_INTR_ENDPT: 1570 pipe->up_methods = &xhci_root_intr_methods; 1571 break; 1572 default: 1573 pipe->up_methods = NULL; 1574 DPRINTFN(0, "bad bEndpointAddress 0x%02jx", 1575 ed->bEndpointAddress, 0, 0, 0); 1576 return USBD_INVAL; 1577 } 1578 return USBD_NORMAL_COMPLETION; 1579 } 1580 1581 switch (xfertype) { 1582 case UE_CONTROL: 1583 pipe->up_methods = &xhci_device_ctrl_methods; 1584 break; 1585 case UE_ISOCHRONOUS: 1586 pipe->up_methods = &xhci_device_isoc_methods; 1587 return USBD_INVAL; 1588 break; 1589 case UE_BULK: 1590 pipe->up_methods = &xhci_device_bulk_methods; 1591 break; 1592 case UE_INTERRUPT: 1593 pipe->up_methods = &xhci_device_intr_methods; 1594 break; 1595 default: 1596 return USBD_IOERROR; 1597 break; 1598 } 1599 1600 if (ed->bEndpointAddress != USB_CONTROL_ENDPOINT) 1601 return xhci_configure_endpoint(pipe); 1602 1603 return USBD_NORMAL_COMPLETION; 1604 } 1605 1606 /* 1607 * Closes pipe, called from usbd_kill_pipe via close methods. 1608 * If the endpoint to be closed is ep0, disable_slot. 1609 * Should be called with sc_lock held. 1610 */ 1611 static void 1612 xhci_close_pipe(struct usbd_pipe *pipe) 1613 { 1614 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 1615 struct xhci_slot * const xs = pipe->up_dev->ud_hcpriv; 1616 usb_endpoint_descriptor_t * const ed = pipe->up_endpoint->ue_edesc; 1617 const u_int dci = xhci_ep_get_dci(ed); 1618 struct xhci_trb trb; 1619 uint32_t *cp; 1620 1621 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1622 1623 if (sc->sc_dying) 1624 return; 1625 1626 /* xs is uninitialized before xhci_init_slot */ 1627 if (xs == NULL || xs->xs_idx == 0) 1628 return; 1629 1630 DPRINTFN(4, "pipe %#jx slot %ju dci %ju", (uintptr_t)pipe, xs->xs_idx, 1631 dci, 0); 1632 1633 KASSERTMSG(!cpu_intr_p() && !cpu_softintr_p(), "called from intr ctx"); 1634 KASSERT(mutex_owned(&sc->sc_lock)); 1635 1636 if (pipe->up_dev->ud_depth == 0) 1637 return; 1638 1639 if (dci == XHCI_DCI_EP_CONTROL) { 1640 DPRINTFN(4, "closing ep0", 0, 0, 0, 0); 1641 xhci_disable_slot(sc, xs->xs_idx); 1642 return; 1643 } 1644 1645 if (xhci_get_epstate(sc, xs, dci) != XHCI_EPSTATE_STOPPED) 1646 (void)xhci_stop_endpoint(pipe); 1647 1648 /* 1649 * set appropriate bit to be dropped. 1650 * don't set DC bit to 1, otherwise all endpoints 1651 * would be deconfigured. 1652 */ 1653 cp = xhci_slot_get_icv(sc, xs, XHCI_ICI_INPUT_CONTROL); 1654 cp[0] = htole32(XHCI_INCTX_0_DROP_MASK(dci)); 1655 cp[1] = htole32(0); 1656 1657 /* XXX should be most significant one, not dci? */ 1658 cp = xhci_slot_get_icv(sc, xs, xhci_dci_to_ici(XHCI_DCI_SLOT)); 1659 cp[0] = htole32(XHCI_SCTX_0_CTX_NUM_SET(dci)); 1660 1661 /* configure ep context performs an implicit dequeue */ 1662 xhci_host_dequeue(&xs->xs_ep[dci].xe_tr); 1663 1664 /* sync input contexts before they are read from memory */ 1665 usb_syncmem(&xs->xs_ic_dma, 0, sc->sc_pgsz, BUS_DMASYNC_PREWRITE); 1666 1667 trb.trb_0 = xhci_slot_get_icp(sc, xs, 0); 1668 trb.trb_2 = 0; 1669 trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | 1670 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_CONFIGURE_EP); 1671 1672 (void)xhci_do_command_locked(sc, &trb, USBD_DEFAULT_TIMEOUT); 1673 usb_syncmem(&xs->xs_dc_dma, 0, sc->sc_pgsz, BUS_DMASYNC_POSTREAD); 1674 } 1675 1676 /* 1677 * Abort transfer. 1678 * Should be called with sc_lock held. 1679 */ 1680 static void 1681 xhci_abort_xfer(struct usbd_xfer *xfer, usbd_status status) 1682 { 1683 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 1684 struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; 1685 const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); 1686 1687 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1688 DPRINTFN(4, "xfer %#jx pipe %#jx status %jd", 1689 (uintptr_t)xfer, (uintptr_t)xfer->ux_pipe, status, 0); 1690 1691 KASSERT(mutex_owned(&sc->sc_lock)); 1692 1693 if (sc->sc_dying) { 1694 /* If we're dying, just do the software part. */ 1695 DPRINTFN(4, "xfer %#jx dying %ju", (uintptr_t)xfer, 1696 xfer->ux_status, 0, 0); 1697 xfer->ux_status = status; 1698 callout_stop(&xfer->ux_callout); 1699 usb_transfer_complete(xfer); 1700 return; 1701 } 1702 1703 /* 1704 * If an abort is already in progress then just wait for it to 1705 * complete and return. 1706 */ 1707 if (xfer->ux_hcflags & UXFER_ABORTING) { 1708 DPRINTFN(4, "already aborting", 0, 0, 0, 0); 1709 #ifdef DIAGNOSTIC 1710 if (status == USBD_TIMEOUT) 1711 DPRINTFN(4, "TIMEOUT while aborting", 0, 0, 0, 0); 1712 #endif 1713 /* Override the status which might be USBD_TIMEOUT. */ 1714 xfer->ux_status = status; 1715 DPRINTFN(4, "xfer %#jx waiting for abort to finish", 1716 (uintptr_t)xfer, 0, 0, 0); 1717 xfer->ux_hcflags |= UXFER_ABORTWAIT; 1718 while (xfer->ux_hcflags & UXFER_ABORTING) 1719 cv_wait(&xfer->ux_hccv, &sc->sc_lock); 1720 return; 1721 } 1722 xfer->ux_hcflags |= UXFER_ABORTING; 1723 1724 /* 1725 * Step 1: Stop xfer timeout timer. 1726 */ 1727 xfer->ux_status = status; 1728 callout_stop(&xfer->ux_callout); 1729 1730 /* 1731 * Step 2: Stop execution of TD on the ring. 1732 */ 1733 switch (xhci_get_epstate(sc, xs, dci)) { 1734 case XHCI_EPSTATE_HALTED: 1735 (void)xhci_reset_endpoint_locked(xfer->ux_pipe); 1736 break; 1737 case XHCI_EPSTATE_STOPPED: 1738 break; 1739 default: 1740 (void)xhci_stop_endpoint(xfer->ux_pipe); 1741 break; 1742 } 1743 #ifdef DIAGNOSTIC 1744 uint32_t epst = xhci_get_epstate(sc, xs, dci); 1745 if (epst != XHCI_EPSTATE_STOPPED) 1746 DPRINTFN(4, "dci %ju not stopped %ju", dci, epst, 0, 0); 1747 #endif 1748 1749 /* 1750 * Step 3: Remove any vestiges of the xfer from the ring. 1751 */ 1752 xhci_set_dequeue_locked(xfer->ux_pipe); 1753 1754 /* 1755 * Step 4: Notify completion to waiting xfers. 1756 */ 1757 int wake = xfer->ux_hcflags & UXFER_ABORTWAIT; 1758 xfer->ux_hcflags &= ~(UXFER_ABORTING | UXFER_ABORTWAIT); 1759 usb_transfer_complete(xfer); 1760 if (wake) { 1761 cv_broadcast(&xfer->ux_hccv); 1762 } 1763 DPRINTFN(14, "end", 0, 0, 0, 0); 1764 1765 KASSERT(mutex_owned(&sc->sc_lock)); 1766 } 1767 1768 static void 1769 xhci_host_dequeue(struct xhci_ring * const xr) 1770 { 1771 /* When dequeueing the controller, update our struct copy too */ 1772 memset(xr->xr_trb, 0, xr->xr_ntrb * XHCI_TRB_SIZE); 1773 usb_syncmem(&xr->xr_dma, 0, xr->xr_ntrb * XHCI_TRB_SIZE, 1774 BUS_DMASYNC_PREWRITE); 1775 memset(xr->xr_cookies, 0, xr->xr_ntrb * sizeof(*xr->xr_cookies)); 1776 1777 xr->xr_ep = 0; 1778 xr->xr_cs = 1; 1779 } 1780 1781 /* 1782 * Recover STALLed endpoint. 1783 * xHCI 1.1 sect 4.10.2.1 1784 * Issue RESET_EP to recover halt condition and SET_TR_DEQUEUE to remove 1785 * all transfers on transfer ring. 1786 * These are done in thread context asynchronously. 1787 */ 1788 static void 1789 xhci_clear_endpoint_stall_async_task(void *cookie) 1790 { 1791 struct usbd_xfer * const xfer = cookie; 1792 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 1793 struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; 1794 const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); 1795 struct xhci_ring * const tr = &xs->xs_ep[dci].xe_tr; 1796 1797 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1798 DPRINTFN(4, "xfer %#jx slot %ju dci %ju", (uintptr_t)xfer, xs->xs_idx, 1799 dci, 0); 1800 1801 xhci_reset_endpoint(xfer->ux_pipe); 1802 xhci_set_dequeue(xfer->ux_pipe); 1803 1804 mutex_enter(&sc->sc_lock); 1805 tr->is_halted = false; 1806 usb_transfer_complete(xfer); 1807 mutex_exit(&sc->sc_lock); 1808 DPRINTFN(4, "ends", 0, 0, 0, 0); 1809 } 1810 1811 static usbd_status 1812 xhci_clear_endpoint_stall_async(struct usbd_xfer *xfer) 1813 { 1814 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 1815 struct xhci_pipe * const xp = (struct xhci_pipe *)xfer->ux_pipe; 1816 1817 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1818 DPRINTFN(4, "xfer %#jx", (uintptr_t)xfer, 0, 0, 0); 1819 1820 if (sc->sc_dying) { 1821 return USBD_IOERROR; 1822 } 1823 1824 usb_init_task(&xp->xp_async_task, 1825 xhci_clear_endpoint_stall_async_task, xfer, USB_TASKQ_MPSAFE); 1826 usb_add_task(xfer->ux_pipe->up_dev, &xp->xp_async_task, USB_TASKQ_HC); 1827 DPRINTFN(4, "ends", 0, 0, 0, 0); 1828 1829 return USBD_NORMAL_COMPLETION; 1830 } 1831 1832 /* Process roothub port status/change events and notify to uhub_intr. */ 1833 static void 1834 xhci_rhpsc(struct xhci_softc * const sc, u_int ctlrport) 1835 { 1836 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1837 DPRINTFN(4, "xhci%jd: port %ju status change", device_unit(sc->sc_dev), 1838 ctlrport, 0, 0); 1839 1840 if (ctlrport > sc->sc_maxports) 1841 return; 1842 1843 const size_t bn = xhci_ctlrport2bus(sc, ctlrport); 1844 const size_t rhp = xhci_ctlrport2rhport(sc, ctlrport); 1845 struct usbd_xfer * const xfer = sc->sc_intrxfer[bn]; 1846 1847 DPRINTFN(4, "xhci%jd: bus %jd bp %ju xfer %#jx status change", 1848 device_unit(sc->sc_dev), bn, rhp, (uintptr_t)xfer); 1849 1850 if (xfer == NULL) 1851 return; 1852 1853 uint8_t *p = xfer->ux_buf; 1854 memset(p, 0, xfer->ux_length); 1855 p[rhp / NBBY] |= 1 << (rhp % NBBY); 1856 xfer->ux_actlen = xfer->ux_length; 1857 xfer->ux_status = USBD_NORMAL_COMPLETION; 1858 usb_transfer_complete(xfer); 1859 } 1860 1861 /* Process Transfer Events */ 1862 static void 1863 xhci_event_transfer(struct xhci_softc * const sc, 1864 const struct xhci_trb * const trb) 1865 { 1866 uint64_t trb_0; 1867 uint32_t trb_2, trb_3; 1868 uint8_t trbcode; 1869 u_int slot, dci; 1870 struct xhci_slot *xs; 1871 struct xhci_ring *xr; 1872 struct xhci_xfer *xx; 1873 struct usbd_xfer *xfer; 1874 usbd_status err; 1875 1876 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 1877 1878 trb_0 = le64toh(trb->trb_0); 1879 trb_2 = le32toh(trb->trb_2); 1880 trb_3 = le32toh(trb->trb_3); 1881 trbcode = XHCI_TRB_2_ERROR_GET(trb_2); 1882 slot = XHCI_TRB_3_SLOT_GET(trb_3); 1883 dci = XHCI_TRB_3_EP_GET(trb_3); 1884 xs = &sc->sc_slots[slot]; 1885 xr = &xs->xs_ep[dci].xe_tr; 1886 1887 /* sanity check */ 1888 KASSERTMSG(xs->xs_idx != 0 && xs->xs_idx <= sc->sc_maxslots, 1889 "invalid xs_idx %u slot %u", xs->xs_idx, slot); 1890 1891 int idx = 0; 1892 if ((trb_3 & XHCI_TRB_3_ED_BIT) == 0) { 1893 if (xhci_trb_get_idx(xr, trb_0, &idx)) { 1894 DPRINTFN(0, "invalid trb_0 0x%jx", trb_0, 0, 0, 0); 1895 return; 1896 } 1897 xx = xr->xr_cookies[idx]; 1898 1899 /* clear cookie of consumed TRB */ 1900 xr->xr_cookies[idx] = NULL; 1901 1902 /* 1903 * xx is NULL if pipe is opened but xfer is not started. 1904 * It happens when stopping idle pipe. 1905 */ 1906 if (xx == NULL || trbcode == XHCI_TRB_ERROR_LENGTH) { 1907 DPRINTFN(1, "Ignore #%ju: cookie %#jx cc %ju dci %ju", 1908 idx, (uintptr_t)xx, trbcode, dci); 1909 DPRINTFN(1, " orig TRB %jx type %ju", trb_0, 1910 XHCI_TRB_3_TYPE_GET(le32toh(xr->xr_trb[idx].trb_3)), 1911 0, 0); 1912 return; 1913 } 1914 } else { 1915 /* When ED != 0, trb_0 is virtual addr of struct xhci_xfer. */ 1916 xx = (void *)(uintptr_t)(trb_0 & ~0x3); 1917 } 1918 /* XXX this may not happen */ 1919 if (xx == NULL) { 1920 DPRINTFN(1, "xfer done: xx is NULL", 0, 0, 0, 0); 1921 return; 1922 } 1923 xfer = &xx->xx_xfer; 1924 /* XXX this may happen when detaching */ 1925 if (xfer == NULL) { 1926 DPRINTFN(1, "xx(%#jx)->xx_xfer is NULL trb_0 %#jx", 1927 (uintptr_t)xx, trb_0, 0, 0); 1928 return; 1929 } 1930 DPRINTFN(14, "xfer %#jx", (uintptr_t)xfer, 0, 0, 0); 1931 /* XXX I dunno why this happens */ 1932 KASSERTMSG(xfer->ux_pipe != NULL, "xfer(%p)->ux_pipe is NULL", xfer); 1933 1934 if (!xfer->ux_pipe->up_repeat && 1935 SIMPLEQ_EMPTY(&xfer->ux_pipe->up_queue)) { 1936 DPRINTFN(1, "xfer(%#jx)->pipe not queued", (uintptr_t)xfer, 1937 0, 0, 0); 1938 return; 1939 } 1940 1941 /* 4.11.5.2 Event Data TRB */ 1942 if ((trb_3 & XHCI_TRB_3_ED_BIT) != 0) { 1943 DPRINTFN(14, "transfer Event Data: 0x%016jx 0x%08jx" 1944 " %02jx", trb_0, XHCI_TRB_2_REM_GET(trb_2), trbcode, 0); 1945 if ((trb_0 & 0x3) == 0x3) { 1946 xfer->ux_actlen = XHCI_TRB_2_REM_GET(trb_2); 1947 } 1948 } 1949 1950 switch (trbcode) { 1951 case XHCI_TRB_ERROR_SHORT_PKT: 1952 case XHCI_TRB_ERROR_SUCCESS: 1953 /* 1954 * A ctrl transfer can generate two events if it has a Data 1955 * stage. A short data stage can be OK and should not 1956 * complete the transfer as the status stage needs to be 1957 * performed. 1958 * 1959 * Note: Data and Status stage events point at same xfer. 1960 * ux_actlen and ux_dmabuf will be passed to 1961 * usb_transfer_complete after the Status stage event. 1962 * 1963 * It can be distingished which stage generates the event: 1964 * + by checking least 3 bits of trb_0 if ED==1. 1965 * (see xhci_device_ctrl_start). 1966 * + by checking the type of original TRB if ED==0. 1967 * 1968 * In addition, intr, bulk, and isoc transfer currently 1969 * consists of single TD, so the "skip" is not needed. 1970 * ctrl xfer uses EVENT_DATA, and others do not. 1971 * Thus driver can switch the flow by checking ED bit. 1972 */ 1973 if ((trb_3 & XHCI_TRB_3_ED_BIT) == 0) { 1974 if (xfer->ux_actlen == 0) 1975 xfer->ux_actlen = xfer->ux_length - 1976 XHCI_TRB_2_REM_GET(trb_2); 1977 if (XHCI_TRB_3_TYPE_GET(le32toh(xr->xr_trb[idx].trb_3)) 1978 == XHCI_TRB_TYPE_DATA_STAGE) { 1979 return; 1980 } 1981 } else if ((trb_0 & 0x3) == 0x3) { 1982 return; 1983 } 1984 err = USBD_NORMAL_COMPLETION; 1985 break; 1986 case XHCI_TRB_ERROR_STOPPED: 1987 case XHCI_TRB_ERROR_LENGTH: 1988 case XHCI_TRB_ERROR_STOPPED_SHORT: 1989 /* 1990 * don't complete the transfer being aborted 1991 * as abort_xfer does instead. 1992 */ 1993 if (xfer->ux_hcflags & UXFER_ABORTING) { 1994 DPRINTFN(14, "ignore aborting xfer %#jx", 1995 (uintptr_t)xfer, 0, 0, 0); 1996 return; 1997 } 1998 err = USBD_CANCELLED; 1999 break; 2000 case XHCI_TRB_ERROR_STALL: 2001 case XHCI_TRB_ERROR_BABBLE: 2002 DPRINTFN(1, "ERR %ju slot %ju dci %ju", trbcode, slot, dci, 0); 2003 xr->is_halted = true; 2004 err = USBD_STALLED; 2005 /* 2006 * Stalled endpoints can be recoverd by issuing 2007 * command TRB TYPE_RESET_EP on xHCI instead of 2008 * issuing request CLEAR_FEATURE UF_ENDPOINT_HALT 2009 * on the endpoint. However, this function may be 2010 * called from softint context (e.g. from umass), 2011 * in that case driver gets KASSERT in cv_timedwait 2012 * in xhci_do_command. 2013 * To avoid this, this runs reset_endpoint and 2014 * usb_transfer_complete in usb task thread 2015 * asynchronously (and then umass issues clear 2016 * UF_ENDPOINT_HALT). 2017 */ 2018 xfer->ux_status = err; 2019 callout_stop(&xfer->ux_callout); 2020 xhci_clear_endpoint_stall_async(xfer); 2021 return; 2022 default: 2023 DPRINTFN(1, "ERR %ju slot %ju dci %ju", trbcode, slot, dci, 0); 2024 err = USBD_IOERROR; 2025 break; 2026 } 2027 xfer->ux_status = err; 2028 2029 if ((trb_3 & XHCI_TRB_3_ED_BIT) != 0) { 2030 if ((trb_0 & 0x3) == 0x0) { 2031 callout_stop(&xfer->ux_callout); 2032 usb_transfer_complete(xfer); 2033 } 2034 } else { 2035 callout_stop(&xfer->ux_callout); 2036 usb_transfer_complete(xfer); 2037 } 2038 } 2039 2040 /* Process Command complete events */ 2041 static void 2042 xhci_event_cmd(struct xhci_softc * const sc, const struct xhci_trb * const trb) 2043 { 2044 uint64_t trb_0; 2045 uint32_t trb_2, trb_3; 2046 2047 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2048 2049 KASSERT(mutex_owned(&sc->sc_lock)); 2050 2051 trb_0 = le64toh(trb->trb_0); 2052 trb_2 = le32toh(trb->trb_2); 2053 trb_3 = le32toh(trb->trb_3); 2054 2055 if (trb_0 == sc->sc_command_addr) { 2056 sc->sc_resultpending = false; 2057 2058 sc->sc_result_trb.trb_0 = trb_0; 2059 sc->sc_result_trb.trb_2 = trb_2; 2060 sc->sc_result_trb.trb_3 = trb_3; 2061 if (XHCI_TRB_2_ERROR_GET(trb_2) != 2062 XHCI_TRB_ERROR_SUCCESS) { 2063 DPRINTFN(1, "command completion " 2064 "failure: 0x%016jx 0x%08jx 0x%08jx", 2065 trb_0, trb_2, trb_3, 0); 2066 } 2067 cv_signal(&sc->sc_command_cv); 2068 } else { 2069 DPRINTFN(1, "spurious event: %#jx 0x%016jx " 2070 "0x%08jx 0x%08jx", (uintptr_t)trb, trb_0, trb_2, trb_3); 2071 } 2072 } 2073 2074 /* 2075 * Process events. 2076 * called from xhci_softintr 2077 */ 2078 static void 2079 xhci_handle_event(struct xhci_softc * const sc, 2080 const struct xhci_trb * const trb) 2081 { 2082 uint64_t trb_0; 2083 uint32_t trb_2, trb_3; 2084 2085 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2086 2087 trb_0 = le64toh(trb->trb_0); 2088 trb_2 = le32toh(trb->trb_2); 2089 trb_3 = le32toh(trb->trb_3); 2090 2091 DPRINTFN(14, "event: %#jx 0x%016jx 0x%08jx 0x%08jx", 2092 (uintptr_t)trb, trb_0, trb_2, trb_3); 2093 2094 /* 2095 * 4.11.3.1, 6.4.2.1 2096 * TRB Pointer is invalid for these completion codes. 2097 */ 2098 switch (XHCI_TRB_2_ERROR_GET(trb_2)) { 2099 case XHCI_TRB_ERROR_RING_UNDERRUN: 2100 case XHCI_TRB_ERROR_RING_OVERRUN: 2101 case XHCI_TRB_ERROR_VF_RING_FULL: 2102 return; 2103 default: 2104 if (trb_0 == 0) { 2105 return; 2106 } 2107 break; 2108 } 2109 2110 switch (XHCI_TRB_3_TYPE_GET(trb_3)) { 2111 case XHCI_TRB_EVENT_TRANSFER: 2112 xhci_event_transfer(sc, trb); 2113 break; 2114 case XHCI_TRB_EVENT_CMD_COMPLETE: 2115 xhci_event_cmd(sc, trb); 2116 break; 2117 case XHCI_TRB_EVENT_PORT_STS_CHANGE: 2118 xhci_rhpsc(sc, (uint32_t)((trb_0 >> 24) & 0xff)); 2119 break; 2120 default: 2121 break; 2122 } 2123 } 2124 2125 static void 2126 xhci_softintr(void *v) 2127 { 2128 struct usbd_bus * const bus = v; 2129 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 2130 struct xhci_ring * const er = &sc->sc_er; 2131 struct xhci_trb *trb; 2132 int i, j, k; 2133 2134 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2135 2136 KASSERT(xhci_polling_p(sc) || mutex_owned(&sc->sc_lock)); 2137 2138 i = er->xr_ep; 2139 j = er->xr_cs; 2140 2141 DPRINTFN(16, "er: xr_ep %jd xr_cs %jd", i, j, 0, 0); 2142 2143 while (1) { 2144 usb_syncmem(&er->xr_dma, XHCI_TRB_SIZE * i, XHCI_TRB_SIZE, 2145 BUS_DMASYNC_POSTREAD); 2146 trb = &er->xr_trb[i]; 2147 k = (le32toh(trb->trb_3) & XHCI_TRB_3_CYCLE_BIT) ? 1 : 0; 2148 2149 if (j != k) 2150 break; 2151 2152 xhci_handle_event(sc, trb); 2153 2154 i++; 2155 if (i == er->xr_ntrb) { 2156 i = 0; 2157 j ^= 1; 2158 } 2159 } 2160 2161 er->xr_ep = i; 2162 er->xr_cs = j; 2163 2164 xhci_rt_write_8(sc, XHCI_ERDP(0), xhci_ring_trbp(er, er->xr_ep) | 2165 XHCI_ERDP_LO_BUSY); 2166 2167 DPRINTFN(16, "ends", 0, 0, 0, 0); 2168 2169 return; 2170 } 2171 2172 static void 2173 xhci_poll(struct usbd_bus *bus) 2174 { 2175 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 2176 2177 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2178 2179 mutex_spin_enter(&sc->sc_intr_lock); 2180 int ret = xhci_intr1(sc); 2181 if (ret) { 2182 xhci_softintr(bus); 2183 } 2184 mutex_spin_exit(&sc->sc_intr_lock); 2185 2186 return; 2187 } 2188 2189 static struct usbd_xfer * 2190 xhci_allocx(struct usbd_bus *bus, unsigned int nframes) 2191 { 2192 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 2193 struct usbd_xfer *xfer; 2194 2195 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2196 2197 xfer = pool_cache_get(sc->sc_xferpool, PR_WAITOK); 2198 if (xfer != NULL) { 2199 memset(xfer, 0, sizeof(struct xhci_xfer)); 2200 #ifdef DIAGNOSTIC 2201 xfer->ux_state = XFER_BUSY; 2202 #endif 2203 } 2204 2205 return xfer; 2206 } 2207 2208 static void 2209 xhci_freex(struct usbd_bus *bus, struct usbd_xfer *xfer) 2210 { 2211 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 2212 2213 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2214 2215 #ifdef DIAGNOSTIC 2216 if (xfer->ux_state != XFER_BUSY) { 2217 DPRINTFN(0, "xfer=%#jx not busy, 0x%08jx", 2218 (uintptr_t)xfer, xfer->ux_state, 0, 0); 2219 } 2220 xfer->ux_state = XFER_FREE; 2221 #endif 2222 pool_cache_put(sc->sc_xferpool, xfer); 2223 } 2224 2225 static void 2226 xhci_get_lock(struct usbd_bus *bus, kmutex_t **lock) 2227 { 2228 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 2229 2230 *lock = &sc->sc_lock; 2231 } 2232 2233 extern uint32_t usb_cookie_no; 2234 2235 /* 2236 * xHCI 4.3 2237 * Called when uhub_explore finds a new device (via usbd_new_device). 2238 * Port initialization and speed detection (4.3.1) are already done in uhub.c. 2239 * This function does: 2240 * Allocate and construct dev structure of default endpoint (ep0). 2241 * Allocate and open pipe of ep0. 2242 * Enable slot and initialize slot context. 2243 * Set Address. 2244 * Read initial device descriptor. 2245 * Determine initial MaxPacketSize (mps) by speed. 2246 * Read full device descriptor. 2247 * Register this device. 2248 * Finally state of device transitions ADDRESSED. 2249 */ 2250 static usbd_status 2251 xhci_new_device(device_t parent, struct usbd_bus *bus, int depth, 2252 int speed, int port, struct usbd_port *up) 2253 { 2254 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 2255 struct usbd_device *dev; 2256 usbd_status err; 2257 usb_device_descriptor_t *dd; 2258 struct xhci_slot *xs; 2259 uint32_t *cp; 2260 2261 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2262 DPRINTFN(4, "port %ju depth %ju speed %ju up %#jx", 2263 port, depth, speed, (uintptr_t)up); 2264 2265 dev = kmem_zalloc(sizeof(*dev), KM_SLEEP); 2266 dev->ud_bus = bus; 2267 dev->ud_quirks = &usbd_no_quirk; 2268 dev->ud_addr = 0; 2269 dev->ud_ddesc.bMaxPacketSize = 0; 2270 dev->ud_depth = depth; 2271 dev->ud_powersrc = up; 2272 dev->ud_myhub = up->up_parent; 2273 dev->ud_speed = speed; 2274 dev->ud_langid = USBD_NOLANG; 2275 dev->ud_cookie.cookie = ++usb_cookie_no; 2276 2277 /* Set up default endpoint handle. */ 2278 dev->ud_ep0.ue_edesc = &dev->ud_ep0desc; 2279 /* doesn't matter, just don't let it uninitialized */ 2280 dev->ud_ep0.ue_toggle = 0; 2281 2282 /* Set up default endpoint descriptor. */ 2283 dev->ud_ep0desc.bLength = USB_ENDPOINT_DESCRIPTOR_SIZE; 2284 dev->ud_ep0desc.bDescriptorType = UDESC_ENDPOINT; 2285 dev->ud_ep0desc.bEndpointAddress = USB_CONTROL_ENDPOINT; 2286 dev->ud_ep0desc.bmAttributes = UE_CONTROL; 2287 dev->ud_ep0desc.bInterval = 0; 2288 2289 /* 4.3, 4.8.2.1 */ 2290 switch (speed) { 2291 case USB_SPEED_SUPER: 2292 case USB_SPEED_SUPER_PLUS: 2293 USETW(dev->ud_ep0desc.wMaxPacketSize, USB_3_MAX_CTRL_PACKET); 2294 break; 2295 case USB_SPEED_FULL: 2296 /* XXX using 64 as initial mps of ep0 in FS */ 2297 case USB_SPEED_HIGH: 2298 USETW(dev->ud_ep0desc.wMaxPacketSize, USB_2_MAX_CTRL_PACKET); 2299 break; 2300 case USB_SPEED_LOW: 2301 default: 2302 USETW(dev->ud_ep0desc.wMaxPacketSize, USB_MAX_IPACKET); 2303 break; 2304 } 2305 2306 up->up_dev = dev; 2307 2308 /* Establish the default pipe. */ 2309 err = usbd_setup_pipe(dev, 0, &dev->ud_ep0, USBD_DEFAULT_INTERVAL, 2310 &dev->ud_pipe0); 2311 if (err) { 2312 goto bad; 2313 } 2314 2315 dd = &dev->ud_ddesc; 2316 2317 if (depth == 0 && port == 0) { 2318 KASSERT(bus->ub_devices[USB_ROOTHUB_INDEX] == NULL); 2319 bus->ub_devices[USB_ROOTHUB_INDEX] = dev; 2320 err = usbd_get_initial_ddesc(dev, dd); 2321 if (err) { 2322 DPRINTFN(1, "get_initial_ddesc %ju", err, 0, 0, 0); 2323 goto bad; 2324 } 2325 2326 err = usbd_reload_device_desc(dev); 2327 if (err) { 2328 DPRINTFN(1, "reload desc %ju", err, 0, 0, 0); 2329 goto bad; 2330 } 2331 } else { 2332 uint8_t slot = 0; 2333 2334 /* 4.3.2 */ 2335 err = xhci_enable_slot(sc, &slot); 2336 if (err) { 2337 DPRINTFN(1, "enable slot %ju", err, 0, 0, 0); 2338 goto bad; 2339 } 2340 2341 xs = &sc->sc_slots[slot]; 2342 dev->ud_hcpriv = xs; 2343 2344 /* 4.3.3 initialize slot structure */ 2345 err = xhci_init_slot(dev, slot); 2346 if (err) { 2347 DPRINTFN(1, "init slot %ju", err, 0, 0, 0); 2348 dev->ud_hcpriv = NULL; 2349 /* 2350 * We have to disable_slot here because 2351 * xs->xs_idx == 0 when xhci_init_slot fails, 2352 * in that case usbd_remove_dev won't work. 2353 */ 2354 mutex_enter(&sc->sc_lock); 2355 xhci_disable_slot(sc, slot); 2356 mutex_exit(&sc->sc_lock); 2357 goto bad; 2358 } 2359 2360 /* 4.3.4 Address Assignment */ 2361 err = xhci_set_address(dev, slot, false); 2362 if (err) { 2363 DPRINTFN(1, "set address w/o bsr %ju", err, 0, 0, 0); 2364 goto bad; 2365 } 2366 2367 /* Allow device time to set new address */ 2368 usbd_delay_ms(dev, USB_SET_ADDRESS_SETTLE); 2369 2370 cp = xhci_slot_get_dcv(sc, xs, XHCI_DCI_SLOT); 2371 HEXDUMP("slot context", cp, sc->sc_ctxsz); 2372 uint8_t addr = XHCI_SCTX_3_DEV_ADDR_GET(le32toh(cp[3])); 2373 DPRINTFN(4, "device address %ju", addr, 0, 0, 0); 2374 /* 2375 * XXX ensure we know when the hardware does something 2376 * we can't yet cope with 2377 */ 2378 KASSERTMSG(addr >= 1 && addr <= 127, "addr %d", addr); 2379 dev->ud_addr = addr; 2380 2381 KASSERTMSG(bus->ub_devices[usb_addr2dindex(dev->ud_addr)] == NULL, 2382 "addr %d already allocated", dev->ud_addr); 2383 /* 2384 * The root hub is given its own slot 2385 */ 2386 bus->ub_devices[usb_addr2dindex(dev->ud_addr)] = dev; 2387 2388 err = usbd_get_initial_ddesc(dev, dd); 2389 if (err) { 2390 DPRINTFN(1, "get_initial_ddesc %ju", err, 0, 0, 0); 2391 goto bad; 2392 } 2393 2394 /* 4.8.2.1 */ 2395 if (USB_IS_SS(speed)) { 2396 if (dd->bMaxPacketSize != 9) { 2397 printf("%s: invalid mps 2^%u for SS ep0," 2398 " using 512\n", 2399 device_xname(sc->sc_dev), 2400 dd->bMaxPacketSize); 2401 dd->bMaxPacketSize = 9; 2402 } 2403 USETW(dev->ud_ep0desc.wMaxPacketSize, 2404 (1 << dd->bMaxPacketSize)); 2405 } else 2406 USETW(dev->ud_ep0desc.wMaxPacketSize, 2407 dd->bMaxPacketSize); 2408 DPRINTFN(4, "bMaxPacketSize %ju", dd->bMaxPacketSize, 0, 0, 0); 2409 err = xhci_update_ep0_mps(sc, xs, 2410 UGETW(dev->ud_ep0desc.wMaxPacketSize)); 2411 if (err) { 2412 DPRINTFN(1, "update mps of ep0 %ju", err, 0, 0, 0); 2413 goto bad; 2414 } 2415 2416 err = usbd_reload_device_desc(dev); 2417 if (err) { 2418 DPRINTFN(1, "reload desc %ju", err, 0, 0, 0); 2419 goto bad; 2420 } 2421 } 2422 2423 DPRINTFN(1, "adding unit addr=%jd, rev=%02jx,", 2424 dev->ud_addr, UGETW(dd->bcdUSB), 0, 0); 2425 DPRINTFN(1, " class=%jd, subclass=%jd, protocol=%jd,", 2426 dd->bDeviceClass, dd->bDeviceSubClass, 2427 dd->bDeviceProtocol, 0); 2428 DPRINTFN(1, " mps=%jd, len=%jd, noconf=%jd, speed=%jd", 2429 dd->bMaxPacketSize, dd->bLength, dd->bNumConfigurations, 2430 dev->ud_speed); 2431 2432 usbd_get_device_strings(dev); 2433 2434 usbd_add_dev_event(USB_EVENT_DEVICE_ATTACH, dev); 2435 2436 if (depth == 0 && port == 0) { 2437 usbd_attach_roothub(parent, dev); 2438 DPRINTFN(1, "root hub %#jx", (uintptr_t)dev, 0, 0, 0); 2439 return USBD_NORMAL_COMPLETION; 2440 } 2441 2442 err = usbd_probe_and_attach(parent, dev, port, dev->ud_addr); 2443 bad: 2444 if (err != USBD_NORMAL_COMPLETION) { 2445 usbd_remove_device(dev, up); 2446 } 2447 2448 return err; 2449 } 2450 2451 static usbd_status 2452 xhci_ring_init(struct xhci_softc * const sc, struct xhci_ring * const xr, 2453 size_t ntrb, size_t align) 2454 { 2455 usbd_status err; 2456 size_t size = ntrb * XHCI_TRB_SIZE; 2457 2458 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2459 2460 err = usb_allocmem(&sc->sc_bus, size, align, &xr->xr_dma); 2461 if (err) 2462 return err; 2463 mutex_init(&xr->xr_lock, MUTEX_DEFAULT, IPL_SOFTUSB); 2464 xr->xr_cookies = kmem_zalloc(sizeof(*xr->xr_cookies) * ntrb, KM_SLEEP); 2465 xr->xr_trb = xhci_ring_trbv(xr, 0); 2466 xr->xr_ntrb = ntrb; 2467 xr->is_halted = false; 2468 xhci_host_dequeue(xr); 2469 2470 return USBD_NORMAL_COMPLETION; 2471 } 2472 2473 static void 2474 xhci_ring_free(struct xhci_softc * const sc, struct xhci_ring * const xr) 2475 { 2476 usb_freemem(&sc->sc_bus, &xr->xr_dma); 2477 mutex_destroy(&xr->xr_lock); 2478 kmem_free(xr->xr_cookies, sizeof(*xr->xr_cookies) * xr->xr_ntrb); 2479 } 2480 2481 static void 2482 xhci_ring_put(struct xhci_softc * const sc, struct xhci_ring * const xr, 2483 void *cookie, struct xhci_trb * const trbs, size_t ntrbs) 2484 { 2485 size_t i; 2486 u_int ri; 2487 u_int cs; 2488 uint64_t parameter; 2489 uint32_t status; 2490 uint32_t control; 2491 2492 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2493 2494 KASSERTMSG(ntrbs <= XHCI_XFER_NTRB, "ntrbs %zu", ntrbs); 2495 for (i = 0; i < ntrbs; i++) { 2496 DPRINTFN(12, "xr %#jx trbs %#jx num %ju", (uintptr_t)xr, 2497 (uintptr_t)trbs, i, 0); 2498 DPRINTFN(12, " %016jx %08jx %08jx", 2499 trbs[i].trb_0, trbs[i].trb_2, trbs[i].trb_3, 0); 2500 KASSERTMSG(XHCI_TRB_3_TYPE_GET(trbs[i].trb_3) != 2501 XHCI_TRB_TYPE_LINK, "trbs[%zu].trb3 %#x", i, trbs[i].trb_3); 2502 } 2503 2504 DPRINTFN(12, "%#jx xr_ep 0x%jx xr_cs %ju", (uintptr_t)xr, xr->xr_ep, 2505 xr->xr_cs, 0); 2506 2507 ri = xr->xr_ep; 2508 cs = xr->xr_cs; 2509 2510 /* 2511 * Although the xhci hardware can do scatter/gather dma from 2512 * arbitrary sized buffers, there is a non-obvious restriction 2513 * that a LINK trb is only allowed at the end of a burst of 2514 * transfers - which might be 16kB. 2515 * Arbitrary aligned LINK trb definitely fail on Ivy bridge. 2516 * The simple solution is not to allow a LINK trb in the middle 2517 * of anything - as here. 2518 * XXX: (dsl) There are xhci controllers out there (eg some made by 2519 * ASMedia) that seem to lock up if they process a LINK trb but 2520 * cannot process the linked-to trb yet. 2521 * The code should write the 'cycle' bit on the link trb AFTER 2522 * adding the other trb. 2523 */ 2524 u_int firstep = xr->xr_ep; 2525 u_int firstcs = xr->xr_cs; 2526 2527 for (i = 0; i < ntrbs; ) { 2528 u_int oldri = ri; 2529 u_int oldcs = cs; 2530 2531 if (ri >= (xr->xr_ntrb - 1)) { 2532 /* Put Link TD at the end of ring */ 2533 parameter = xhci_ring_trbp(xr, 0); 2534 status = 0; 2535 control = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_LINK) | 2536 XHCI_TRB_3_TC_BIT; 2537 xr->xr_cookies[ri] = NULL; 2538 xr->xr_ep = 0; 2539 xr->xr_cs ^= 1; 2540 ri = xr->xr_ep; 2541 cs = xr->xr_cs; 2542 } else { 2543 parameter = trbs[i].trb_0; 2544 status = trbs[i].trb_2; 2545 control = trbs[i].trb_3; 2546 2547 xr->xr_cookies[ri] = cookie; 2548 ri++; 2549 i++; 2550 } 2551 /* 2552 * If this is a first TRB, mark it invalid to prevent 2553 * xHC from running it immediately. 2554 */ 2555 if (oldri == firstep) { 2556 if (oldcs) { 2557 control &= ~XHCI_TRB_3_CYCLE_BIT; 2558 } else { 2559 control |= XHCI_TRB_3_CYCLE_BIT; 2560 } 2561 } else { 2562 if (oldcs) { 2563 control |= XHCI_TRB_3_CYCLE_BIT; 2564 } else { 2565 control &= ~XHCI_TRB_3_CYCLE_BIT; 2566 } 2567 } 2568 xhci_trb_put(&xr->xr_trb[oldri], parameter, status, control); 2569 usb_syncmem(&xr->xr_dma, XHCI_TRB_SIZE * oldri, 2570 XHCI_TRB_SIZE * 1, BUS_DMASYNC_PREWRITE); 2571 } 2572 2573 /* Now invert cycle bit of first TRB */ 2574 if (firstcs) { 2575 xr->xr_trb[firstep].trb_3 |= htole32(XHCI_TRB_3_CYCLE_BIT); 2576 } else { 2577 xr->xr_trb[firstep].trb_3 &= ~htole32(XHCI_TRB_3_CYCLE_BIT); 2578 } 2579 usb_syncmem(&xr->xr_dma, XHCI_TRB_SIZE * firstep, 2580 XHCI_TRB_SIZE * 1, BUS_DMASYNC_PREWRITE); 2581 2582 xr->xr_ep = ri; 2583 xr->xr_cs = cs; 2584 2585 DPRINTFN(12, "%#jx xr_ep 0x%jx xr_cs %ju", (uintptr_t)xr, xr->xr_ep, 2586 xr->xr_cs, 0); 2587 } 2588 2589 /* 2590 * Stop execution commands, purge all commands on command ring, and 2591 * rewind dequeue pointer. 2592 */ 2593 static void 2594 xhci_abort_command(struct xhci_softc *sc) 2595 { 2596 struct xhci_ring * const cr = &sc->sc_cr; 2597 uint64_t crcr; 2598 int i; 2599 2600 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2601 DPRINTFN(14, "command %#jx timeout, aborting", 2602 sc->sc_command_addr, 0, 0, 0); 2603 2604 mutex_enter(&cr->xr_lock); 2605 2606 /* 4.6.1.2 Aborting a Command */ 2607 crcr = xhci_op_read_8(sc, XHCI_CRCR); 2608 xhci_op_write_8(sc, XHCI_CRCR, crcr | XHCI_CRCR_LO_CA); 2609 2610 for (i = 0; i < 500; i++) { 2611 crcr = xhci_op_read_8(sc, XHCI_CRCR); 2612 if ((crcr & XHCI_CRCR_LO_CRR) == 0) 2613 break; 2614 usb_delay_ms(&sc->sc_bus, 1); 2615 } 2616 if ((crcr & XHCI_CRCR_LO_CRR) != 0) { 2617 DPRINTFN(1, "Command Abort timeout", 0, 0, 0, 0); 2618 /* reset HC here? */ 2619 } 2620 2621 /* reset command ring dequeue pointer */ 2622 cr->xr_ep = 0; 2623 cr->xr_cs = 1; 2624 xhci_op_write_8(sc, XHCI_CRCR, xhci_ring_trbp(cr, 0) | cr->xr_cs); 2625 2626 mutex_exit(&cr->xr_lock); 2627 } 2628 2629 /* 2630 * Put a command on command ring, ring bell, set timer, and cv_timedwait. 2631 * Command completion is notified by cv_signal from xhci_event_cmd() 2632 * (called from xhci_softint), or timed-out. 2633 * The completion code is copied to sc->sc_result_trb in xhci_event_cmd(), 2634 * then do_command examines it. 2635 */ 2636 static usbd_status 2637 xhci_do_command_locked(struct xhci_softc * const sc, 2638 struct xhci_trb * const trb, int timeout) 2639 { 2640 struct xhci_ring * const cr = &sc->sc_cr; 2641 usbd_status err; 2642 2643 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2644 DPRINTFN(12, "input: 0x%016jx 0x%08jx 0x%08jx", 2645 trb->trb_0, trb->trb_2, trb->trb_3, 0); 2646 2647 KASSERTMSG(!cpu_intr_p() && !cpu_softintr_p(), "called from intr ctx"); 2648 KASSERT(mutex_owned(&sc->sc_lock)); 2649 2650 while (sc->sc_command_addr != 0) 2651 cv_wait(&sc->sc_cmdbusy_cv, &sc->sc_lock); 2652 2653 /* 2654 * If enqueue pointer points at last of ring, it's Link TRB, 2655 * command TRB will be stored in 0th TRB. 2656 */ 2657 if (cr->xr_ep == cr->xr_ntrb - 1) 2658 sc->sc_command_addr = xhci_ring_trbp(cr, 0); 2659 else 2660 sc->sc_command_addr = xhci_ring_trbp(cr, cr->xr_ep); 2661 2662 sc->sc_resultpending = true; 2663 2664 mutex_enter(&cr->xr_lock); 2665 xhci_ring_put(sc, cr, NULL, trb, 1); 2666 mutex_exit(&cr->xr_lock); 2667 2668 xhci_db_write_4(sc, XHCI_DOORBELL(0), 0); 2669 2670 while (sc->sc_resultpending) { 2671 if (cv_timedwait(&sc->sc_command_cv, &sc->sc_lock, 2672 MAX(1, mstohz(timeout))) == EWOULDBLOCK) { 2673 xhci_abort_command(sc); 2674 err = USBD_TIMEOUT; 2675 goto timedout; 2676 } 2677 } 2678 2679 trb->trb_0 = sc->sc_result_trb.trb_0; 2680 trb->trb_2 = sc->sc_result_trb.trb_2; 2681 trb->trb_3 = sc->sc_result_trb.trb_3; 2682 2683 DPRINTFN(12, "output: 0x%016jx 0x%08jx 0x%08jx", 2684 trb->trb_0, trb->trb_2, trb->trb_3, 0); 2685 2686 switch (XHCI_TRB_2_ERROR_GET(trb->trb_2)) { 2687 case XHCI_TRB_ERROR_SUCCESS: 2688 err = USBD_NORMAL_COMPLETION; 2689 break; 2690 default: 2691 case 192 ... 223: 2692 err = USBD_IOERROR; 2693 break; 2694 case 224 ... 255: 2695 err = USBD_NORMAL_COMPLETION; 2696 break; 2697 } 2698 2699 timedout: 2700 sc->sc_resultpending = false; 2701 sc->sc_command_addr = 0; 2702 cv_broadcast(&sc->sc_cmdbusy_cv); 2703 2704 return err; 2705 } 2706 2707 static usbd_status 2708 xhci_do_command(struct xhci_softc * const sc, struct xhci_trb * const trb, 2709 int timeout) 2710 { 2711 2712 mutex_enter(&sc->sc_lock); 2713 usbd_status ret = xhci_do_command_locked(sc, trb, timeout); 2714 mutex_exit(&sc->sc_lock); 2715 2716 return ret; 2717 } 2718 2719 static usbd_status 2720 xhci_enable_slot(struct xhci_softc * const sc, uint8_t * const slotp) 2721 { 2722 struct xhci_trb trb; 2723 usbd_status err; 2724 2725 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2726 2727 trb.trb_0 = 0; 2728 trb.trb_2 = 0; 2729 trb.trb_3 = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_ENABLE_SLOT); 2730 2731 err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); 2732 if (err != USBD_NORMAL_COMPLETION) { 2733 return err; 2734 } 2735 2736 *slotp = XHCI_TRB_3_SLOT_GET(trb.trb_3); 2737 2738 return err; 2739 } 2740 2741 /* 2742 * xHCI 4.6.4 2743 * Deallocate ring and device/input context DMA buffers, and disable_slot. 2744 * All endpoints in the slot should be stopped. 2745 * Should be called with sc_lock held. 2746 */ 2747 static usbd_status 2748 xhci_disable_slot(struct xhci_softc * const sc, uint8_t slot) 2749 { 2750 struct xhci_trb trb; 2751 struct xhci_slot *xs; 2752 usbd_status err; 2753 2754 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2755 2756 if (sc->sc_dying) 2757 return USBD_IOERROR; 2758 2759 trb.trb_0 = 0; 2760 trb.trb_2 = 0; 2761 trb.trb_3 = htole32( 2762 XHCI_TRB_3_SLOT_SET(slot) | 2763 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_DISABLE_SLOT)); 2764 2765 err = xhci_do_command_locked(sc, &trb, USBD_DEFAULT_TIMEOUT); 2766 2767 if (!err) { 2768 xs = &sc->sc_slots[slot]; 2769 if (xs->xs_idx != 0) { 2770 xhci_free_slot(sc, xs, XHCI_DCI_SLOT + 1, 32); 2771 xhci_set_dcba(sc, 0, slot); 2772 memset(xs, 0, sizeof(*xs)); 2773 } 2774 } 2775 2776 return err; 2777 } 2778 2779 /* 2780 * Set address of device and transition slot state from ENABLED to ADDRESSED 2781 * if Block Setaddress Request (BSR) is false. 2782 * If BSR==true, transition slot state from ENABLED to DEFAULT. 2783 * see xHCI 1.1 4.5.3, 3.3.4 2784 * Should be called without sc_lock held. 2785 */ 2786 static usbd_status 2787 xhci_address_device(struct xhci_softc * const sc, 2788 uint64_t icp, uint8_t slot_id, bool bsr) 2789 { 2790 struct xhci_trb trb; 2791 usbd_status err; 2792 2793 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2794 2795 trb.trb_0 = icp; 2796 trb.trb_2 = 0; 2797 trb.trb_3 = XHCI_TRB_3_SLOT_SET(slot_id) | 2798 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_ADDRESS_DEVICE) | 2799 (bsr ? XHCI_TRB_3_BSR_BIT : 0); 2800 2801 err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); 2802 2803 if (XHCI_TRB_2_ERROR_GET(trb.trb_2) == XHCI_TRB_ERROR_NO_SLOTS) 2804 err = USBD_NO_ADDR; 2805 2806 return err; 2807 } 2808 2809 static usbd_status 2810 xhci_update_ep0_mps(struct xhci_softc * const sc, 2811 struct xhci_slot * const xs, u_int mps) 2812 { 2813 struct xhci_trb trb; 2814 usbd_status err; 2815 uint32_t * cp; 2816 2817 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2818 DPRINTFN(4, "slot %ju mps %ju", xs->xs_idx, mps, 0, 0); 2819 2820 cp = xhci_slot_get_icv(sc, xs, XHCI_ICI_INPUT_CONTROL); 2821 cp[0] = htole32(0); 2822 cp[1] = htole32(XHCI_INCTX_1_ADD_MASK(XHCI_DCI_EP_CONTROL)); 2823 2824 cp = xhci_slot_get_icv(sc, xs, xhci_dci_to_ici(XHCI_DCI_EP_CONTROL)); 2825 cp[1] = htole32(XHCI_EPCTX_1_MAXP_SIZE_SET(mps)); 2826 2827 /* sync input contexts before they are read from memory */ 2828 usb_syncmem(&xs->xs_ic_dma, 0, sc->sc_pgsz, BUS_DMASYNC_PREWRITE); 2829 HEXDUMP("input context", xhci_slot_get_icv(sc, xs, 0), 2830 sc->sc_ctxsz * 4); 2831 2832 trb.trb_0 = xhci_slot_get_icp(sc, xs, 0); 2833 trb.trb_2 = 0; 2834 trb.trb_3 = XHCI_TRB_3_SLOT_SET(xs->xs_idx) | 2835 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_EVALUATE_CTX); 2836 2837 err = xhci_do_command(sc, &trb, USBD_DEFAULT_TIMEOUT); 2838 return err; 2839 } 2840 2841 static void 2842 xhci_set_dcba(struct xhci_softc * const sc, uint64_t dcba, int si) 2843 { 2844 uint64_t * const dcbaa = KERNADDR(&sc->sc_dcbaa_dma, 0); 2845 2846 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2847 DPRINTFN(4, "dcbaa %#jx dc %016jx slot %jd", 2848 (uintptr_t)&dcbaa[si], dcba, si, 0); 2849 2850 dcbaa[si] = htole64(dcba); 2851 usb_syncmem(&sc->sc_dcbaa_dma, si * sizeof(uint64_t), sizeof(uint64_t), 2852 BUS_DMASYNC_PREWRITE); 2853 } 2854 2855 /* 2856 * Allocate device and input context DMA buffer, and 2857 * TRB DMA buffer for each endpoint. 2858 */ 2859 static usbd_status 2860 xhci_init_slot(struct usbd_device *dev, uint32_t slot) 2861 { 2862 struct xhci_softc * const sc = XHCI_BUS2SC(dev->ud_bus); 2863 struct xhci_slot *xs; 2864 usbd_status err; 2865 u_int dci; 2866 2867 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2868 DPRINTFN(4, "slot %ju", slot, 0, 0, 0); 2869 2870 xs = &sc->sc_slots[slot]; 2871 2872 /* allocate contexts */ 2873 err = usb_allocmem(&sc->sc_bus, sc->sc_pgsz, sc->sc_pgsz, 2874 &xs->xs_dc_dma); 2875 if (err) 2876 return err; 2877 memset(KERNADDR(&xs->xs_dc_dma, 0), 0, sc->sc_pgsz); 2878 2879 err = usb_allocmem(&sc->sc_bus, sc->sc_pgsz, sc->sc_pgsz, 2880 &xs->xs_ic_dma); 2881 if (err) 2882 goto bad1; 2883 memset(KERNADDR(&xs->xs_ic_dma, 0), 0, sc->sc_pgsz); 2884 2885 for (dci = 0; dci < 32; dci++) { 2886 //CTASSERT(sizeof(xs->xs_ep[dci]) == sizeof(struct xhci_endpoint)); 2887 memset(&xs->xs_ep[dci], 0, sizeof(xs->xs_ep[dci])); 2888 if (dci == XHCI_DCI_SLOT) 2889 continue; 2890 err = xhci_ring_init(sc, &xs->xs_ep[dci].xe_tr, 2891 XHCI_TRANSFER_RING_TRBS, XHCI_TRB_ALIGN); 2892 if (err) { 2893 DPRINTFN(0, "ring init failure", 0, 0, 0, 0); 2894 goto bad2; 2895 } 2896 } 2897 2898 bad2: 2899 if (err == USBD_NORMAL_COMPLETION) { 2900 xs->xs_idx = slot; 2901 } else { 2902 xhci_free_slot(sc, xs, XHCI_DCI_SLOT + 1, dci); 2903 } 2904 2905 return err; 2906 2907 bad1: 2908 usb_freemem(&sc->sc_bus, &xs->xs_dc_dma); 2909 xs->xs_idx = 0; 2910 return err; 2911 } 2912 2913 static void 2914 xhci_free_slot(struct xhci_softc *sc, struct xhci_slot *xs, int start_dci, 2915 int end_dci) 2916 { 2917 u_int dci; 2918 2919 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2920 DPRINTFN(4, "slot %ju start %ju end %ju", xs->xs_idx, start_dci, 2921 end_dci, 0); 2922 2923 for (dci = start_dci; dci < end_dci; dci++) { 2924 xhci_ring_free(sc, &xs->xs_ep[dci].xe_tr); 2925 memset(&xs->xs_ep[dci], 0, sizeof(xs->xs_ep[dci])); 2926 } 2927 usb_freemem(&sc->sc_bus, &xs->xs_ic_dma); 2928 usb_freemem(&sc->sc_bus, &xs->xs_dc_dma); 2929 xs->xs_idx = 0; 2930 } 2931 2932 /* 2933 * Setup slot context, set Device Context Base Address, and issue 2934 * Set Address Device command. 2935 */ 2936 static usbd_status 2937 xhci_set_address(struct usbd_device *dev, uint32_t slot, bool bsr) 2938 { 2939 struct xhci_softc * const sc = XHCI_BUS2SC(dev->ud_bus); 2940 struct xhci_slot *xs; 2941 usbd_status err; 2942 2943 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2944 DPRINTFN(4, "slot %ju bsr %ju", slot, bsr, 0, 0); 2945 2946 xs = &sc->sc_slots[slot]; 2947 2948 xhci_setup_ctx(dev->ud_pipe0); 2949 2950 HEXDUMP("input context", xhci_slot_get_icv(sc, xs, 0), 2951 sc->sc_ctxsz * 3); 2952 2953 xhci_set_dcba(sc, DMAADDR(&xs->xs_dc_dma, 0), slot); 2954 2955 err = xhci_address_device(sc, xhci_slot_get_icp(sc, xs, 0), slot, bsr); 2956 2957 usb_syncmem(&xs->xs_dc_dma, 0, sc->sc_pgsz, BUS_DMASYNC_POSTREAD); 2958 HEXDUMP("output context", xhci_slot_get_dcv(sc, xs, 0), 2959 sc->sc_ctxsz * 2); 2960 2961 return err; 2962 } 2963 2964 /* 2965 * 4.8.2, 6.2.3.2 2966 * construct slot/endpoint context parameters and do syncmem 2967 */ 2968 static void 2969 xhci_setup_ctx(struct usbd_pipe *pipe) 2970 { 2971 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 2972 struct usbd_device *dev = pipe->up_dev; 2973 struct xhci_slot * const xs = dev->ud_hcpriv; 2974 usb_endpoint_descriptor_t * const ed = pipe->up_endpoint->ue_edesc; 2975 const u_int dci = xhci_ep_get_dci(ed); 2976 const uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes); 2977 uint32_t *cp; 2978 uint16_t mps = UGETW(ed->wMaxPacketSize); 2979 uint8_t speed = dev->ud_speed; 2980 uint8_t ival = ed->bInterval; 2981 2982 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 2983 DPRINTFN(4, "pipe %#jx: slot %ju dci %ju speed %ju", 2984 (uintptr_t)pipe, xs->xs_idx, dci, speed); 2985 2986 /* set up initial input control context */ 2987 cp = xhci_slot_get_icv(sc, xs, XHCI_ICI_INPUT_CONTROL); 2988 cp[0] = htole32(0); 2989 cp[1] = htole32(XHCI_INCTX_1_ADD_MASK(dci)); 2990 cp[1] |= htole32(XHCI_INCTX_1_ADD_MASK(XHCI_DCI_SLOT)); 2991 cp[7] = htole32(0); 2992 2993 /* set up input slot context */ 2994 cp = xhci_slot_get_icv(sc, xs, xhci_dci_to_ici(XHCI_DCI_SLOT)); 2995 cp[0] = 2996 XHCI_SCTX_0_CTX_NUM_SET(dci) | 2997 XHCI_SCTX_0_SPEED_SET(xhci_speed2xspeed(speed)); 2998 cp[1] = 0; 2999 cp[2] = XHCI_SCTX_2_IRQ_TARGET_SET(0); 3000 cp[3] = 0; 3001 xhci_setup_route(pipe, cp); 3002 xhci_setup_tthub(pipe, cp); 3003 3004 cp[0] = htole32(cp[0]); 3005 cp[1] = htole32(cp[1]); 3006 cp[2] = htole32(cp[2]); 3007 cp[3] = htole32(cp[3]); 3008 3009 /* set up input endpoint context */ 3010 cp = xhci_slot_get_icv(sc, xs, xhci_dci_to_ici(dci)); 3011 cp[0] = 3012 XHCI_EPCTX_0_EPSTATE_SET(0) | 3013 XHCI_EPCTX_0_MULT_SET(0) | 3014 XHCI_EPCTX_0_MAXP_STREAMS_SET(0) | 3015 XHCI_EPCTX_0_LSA_SET(0) | 3016 XHCI_EPCTX_0_MAX_ESIT_PAYLOAD_HI_SET(0); 3017 cp[1] = 3018 XHCI_EPCTX_1_EPTYPE_SET(xhci_ep_get_type(ed)) | 3019 XHCI_EPCTX_1_HID_SET(0) | 3020 XHCI_EPCTX_1_MAXB_SET(0); 3021 3022 if (xfertype != UE_ISOCHRONOUS) 3023 cp[1] |= XHCI_EPCTX_1_CERR_SET(3); 3024 3025 if (xfertype == UE_CONTROL) 3026 cp[4] = XHCI_EPCTX_4_AVG_TRB_LEN_SET(8); /* 6.2.3 */ 3027 else if (USB_IS_SS(speed)) 3028 cp[4] = XHCI_EPCTX_4_AVG_TRB_LEN_SET(mps); 3029 else 3030 cp[4] = XHCI_EPCTX_4_AVG_TRB_LEN_SET(UE_GET_SIZE(mps)); 3031 3032 xhci_setup_maxburst(pipe, cp); 3033 3034 switch (xfertype) { 3035 case UE_CONTROL: 3036 break; 3037 case UE_BULK: 3038 /* XXX Set MaxPStreams, HID, and LSA if streams enabled */ 3039 break; 3040 case UE_INTERRUPT: 3041 if (pipe->up_interval != USBD_DEFAULT_INTERVAL) 3042 ival = pipe->up_interval; 3043 3044 ival = xhci_bival2ival(ival, speed); 3045 cp[0] |= XHCI_EPCTX_0_IVAL_SET(ival); 3046 break; 3047 case UE_ISOCHRONOUS: 3048 if (pipe->up_interval != USBD_DEFAULT_INTERVAL) 3049 ival = pipe->up_interval; 3050 3051 /* xHCI 6.2.3.6 Table 65, USB 2.0 9.6.6 */ 3052 if (speed == USB_SPEED_FULL) 3053 ival += 3; /* 1ms -> 125us */ 3054 ival--; 3055 cp[0] |= XHCI_EPCTX_0_IVAL_SET(ival); 3056 break; 3057 default: 3058 break; 3059 } 3060 DPRINTFN(4, "setting ival %ju MaxBurst %#jx", 3061 XHCI_EPCTX_0_IVAL_GET(cp[0]), XHCI_EPCTX_1_MAXB_GET(cp[1]), 0, 0); 3062 3063 /* rewind TR dequeue pointer in xHC */ 3064 /* can't use xhci_ep_get_dci() yet? */ 3065 *(uint64_t *)(&cp[2]) = htole64( 3066 xhci_ring_trbp(&xs->xs_ep[dci].xe_tr, 0) | 3067 XHCI_EPCTX_2_DCS_SET(1)); 3068 3069 cp[0] = htole32(cp[0]); 3070 cp[1] = htole32(cp[1]); 3071 cp[4] = htole32(cp[4]); 3072 3073 /* rewind TR dequeue pointer in driver */ 3074 struct xhci_ring *xr = &xs->xs_ep[dci].xe_tr; 3075 mutex_enter(&xr->xr_lock); 3076 xhci_host_dequeue(xr); 3077 mutex_exit(&xr->xr_lock); 3078 3079 /* sync input contexts before they are read from memory */ 3080 usb_syncmem(&xs->xs_ic_dma, 0, sc->sc_pgsz, BUS_DMASYNC_PREWRITE); 3081 } 3082 3083 /* 3084 * Setup route string and roothub port of given device for slot context 3085 */ 3086 static void 3087 xhci_setup_route(struct usbd_pipe *pipe, uint32_t *cp) 3088 { 3089 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 3090 struct usbd_device *dev = pipe->up_dev; 3091 struct usbd_port *up = dev->ud_powersrc; 3092 struct usbd_device *hub; 3093 struct usbd_device *adev; 3094 uint8_t rhport = 0; 3095 uint32_t route = 0; 3096 3097 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3098 3099 /* Locate root hub port and Determine route string */ 3100 /* 4.3.3 route string does not include roothub port */ 3101 for (hub = dev; hub != NULL; hub = hub->ud_myhub) { 3102 uint32_t dep; 3103 3104 DPRINTFN(4, "hub %#jx depth %jd upport %jp upportno %jd", 3105 (uintptr_t)hub, hub->ud_depth, (uintptr_t)hub->ud_powersrc, 3106 hub->ud_powersrc ? (uintptr_t)hub->ud_powersrc->up_portno : 3107 -1); 3108 3109 if (hub->ud_powersrc == NULL) 3110 break; 3111 dep = hub->ud_depth; 3112 if (dep == 0) 3113 break; 3114 rhport = hub->ud_powersrc->up_portno; 3115 if (dep > USB_HUB_MAX_DEPTH) 3116 continue; 3117 3118 route |= 3119 (rhport > UHD_SS_NPORTS_MAX ? UHD_SS_NPORTS_MAX : rhport) 3120 << ((dep - 1) * 4); 3121 } 3122 route = route >> 4; 3123 size_t bn = hub == sc->sc_bus.ub_roothub ? 0 : 1; 3124 3125 /* Locate port on upstream high speed hub */ 3126 for (adev = dev, hub = up->up_parent; 3127 hub != NULL && hub->ud_speed != USB_SPEED_HIGH; 3128 adev = hub, hub = hub->ud_myhub) 3129 ; 3130 if (hub) { 3131 int p; 3132 for (p = 0; p < hub->ud_hub->uh_hubdesc.bNbrPorts; p++) { 3133 if (hub->ud_hub->uh_ports[p].up_dev == adev) { 3134 dev->ud_myhsport = &hub->ud_hub->uh_ports[p]; 3135 goto found; 3136 } 3137 } 3138 panic("%s: cannot find HS port", __func__); 3139 found: 3140 DPRINTFN(4, "high speed port %jd", p, 0, 0, 0); 3141 } else { 3142 dev->ud_myhsport = NULL; 3143 } 3144 3145 const size_t ctlrport = xhci_rhport2ctlrport(sc, bn, rhport); 3146 3147 DPRINTFN(4, "rhport %ju ctlrport %ju Route %05jx hub %#jx", rhport, 3148 ctlrport, route, (uintptr_t)hub); 3149 3150 cp[0] |= XHCI_SCTX_0_ROUTE_SET(route); 3151 cp[1] |= XHCI_SCTX_1_RH_PORT_SET(ctlrport); 3152 } 3153 3154 /* 3155 * Setup whether device is hub, whether device uses MTT, and 3156 * TT informations if it uses MTT. 3157 */ 3158 static void 3159 xhci_setup_tthub(struct usbd_pipe *pipe, uint32_t *cp) 3160 { 3161 struct usbd_device *dev = pipe->up_dev; 3162 struct usbd_port *myhsport = dev->ud_myhsport; 3163 usb_device_descriptor_t * const dd = &dev->ud_ddesc; 3164 uint32_t speed = dev->ud_speed; 3165 uint8_t rhaddr = dev->ud_bus->ub_rhaddr; 3166 uint8_t tthubslot, ttportnum; 3167 bool ishub; 3168 bool usemtt; 3169 3170 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3171 3172 /* 3173 * 6.2.2, Table 57-60, 6.2.2.1, 6.2.2.2 3174 * tthubslot: 3175 * This is the slot ID of parent HS hub 3176 * if LS/FS device is connected && connected through HS hub. 3177 * This is 0 if device is not LS/FS device || 3178 * parent hub is not HS hub || 3179 * attached to root hub. 3180 * ttportnum: 3181 * This is the downstream facing port of parent HS hub 3182 * if LS/FS device is connected. 3183 * This is 0 if device is not LS/FS device || 3184 * parent hub is not HS hub || 3185 * attached to root hub. 3186 */ 3187 if (myhsport && 3188 myhsport->up_parent->ud_addr != rhaddr && 3189 (speed == USB_SPEED_LOW || speed == USB_SPEED_FULL)) { 3190 ttportnum = myhsport->up_portno; 3191 tthubslot = myhsport->up_parent->ud_addr; 3192 } else { 3193 ttportnum = 0; 3194 tthubslot = 0; 3195 } 3196 DPRINTFN(4, "myhsport %#jx ttportnum=%jd tthubslot=%jd", 3197 (uintptr_t)myhsport, ttportnum, tthubslot, 0); 3198 3199 /* ishub is valid after reading UDESC_DEVICE */ 3200 ishub = (dd->bDeviceClass == UDCLASS_HUB); 3201 3202 /* dev->ud_hub is valid after reading UDESC_HUB */ 3203 if (ishub && dev->ud_hub) { 3204 usb_hub_descriptor_t *hd = &dev->ud_hub->uh_hubdesc; 3205 uint8_t ttt = 3206 __SHIFTOUT(UGETW(hd->wHubCharacteristics), UHD_TT_THINK); 3207 3208 cp[1] |= XHCI_SCTX_1_NUM_PORTS_SET(hd->bNbrPorts); 3209 cp[2] |= XHCI_SCTX_2_TT_THINK_TIME_SET(ttt); 3210 DPRINTFN(4, "nports=%jd ttt=%jd", hd->bNbrPorts, ttt, 0, 0); 3211 } 3212 3213 #define IS_MTTHUB(dd) \ 3214 ((dd)->bDeviceProtocol == UDPROTO_HSHUBMTT) 3215 3216 /* 3217 * MTT flag is set if 3218 * 1. this is HS hub && MTTs are supported and enabled; or 3219 * 2. this is LS or FS device && there is a parent HS hub where MTTs 3220 * are supported and enabled. 3221 * 3222 * XXX enabled is not tested yet 3223 */ 3224 if (ishub && speed == USB_SPEED_HIGH && IS_MTTHUB(dd)) 3225 usemtt = true; 3226 else if ((speed == USB_SPEED_LOW || speed == USB_SPEED_FULL) && 3227 myhsport && 3228 myhsport->up_parent->ud_addr != rhaddr && 3229 IS_MTTHUB(&myhsport->up_parent->ud_ddesc)) 3230 usemtt = true; 3231 else 3232 usemtt = false; 3233 DPRINTFN(4, "class %ju proto %ju ishub %jd usemtt %jd", 3234 dd->bDeviceClass, dd->bDeviceProtocol, ishub, usemtt); 3235 3236 #undef IS_MTTHUB 3237 3238 cp[0] |= 3239 XHCI_SCTX_0_HUB_SET(ishub ? 1 : 0) | 3240 XHCI_SCTX_0_MTT_SET(usemtt ? 1 : 0); 3241 cp[2] |= 3242 XHCI_SCTX_2_TT_HUB_SID_SET(tthubslot) | 3243 XHCI_SCTX_2_TT_PORT_NUM_SET(ttportnum); 3244 } 3245 3246 /* set up params for periodic endpoint */ 3247 static void 3248 xhci_setup_maxburst(struct usbd_pipe *pipe, uint32_t *cp) 3249 { 3250 struct usbd_device *dev = pipe->up_dev; 3251 usb_endpoint_descriptor_t * const ed = pipe->up_endpoint->ue_edesc; 3252 const uint8_t xfertype = UE_GET_XFERTYPE(ed->bmAttributes); 3253 usbd_desc_iter_t iter; 3254 const usb_cdc_descriptor_t *cdcd; 3255 uint32_t maxb = 0; 3256 uint16_t mps = UGETW(ed->wMaxPacketSize); 3257 uint8_t speed = dev->ud_speed; 3258 uint8_t ep; 3259 3260 /* config desc is NULL when opening ep0 */ 3261 if (dev == NULL || dev->ud_cdesc == NULL) 3262 goto no_cdcd; 3263 cdcd = (const usb_cdc_descriptor_t *)usb_find_desc(dev, 3264 UDESC_INTERFACE, USBD_CDCSUBTYPE_ANY); 3265 if (cdcd == NULL) 3266 goto no_cdcd; 3267 usb_desc_iter_init(dev, &iter); 3268 iter.cur = (const void *)cdcd; 3269 3270 /* find endpoint_ss_comp desc for ep of this pipe */ 3271 for (ep = 0;;) { 3272 cdcd = (const usb_cdc_descriptor_t *)usb_desc_iter_next(&iter); 3273 if (cdcd == NULL) 3274 break; 3275 if (ep == 0 && cdcd->bDescriptorType == UDESC_ENDPOINT) { 3276 ep = ((const usb_endpoint_descriptor_t *)cdcd)-> 3277 bEndpointAddress; 3278 if (UE_GET_ADDR(ep) == 3279 UE_GET_ADDR(ed->bEndpointAddress)) { 3280 cdcd = (const usb_cdc_descriptor_t *) 3281 usb_desc_iter_next(&iter); 3282 break; 3283 } 3284 ep = 0; 3285 } 3286 } 3287 if (cdcd != NULL && cdcd->bDescriptorType == UDESC_ENDPOINT_SS_COMP) { 3288 const usb_endpoint_ss_comp_descriptor_t * esscd = 3289 (const usb_endpoint_ss_comp_descriptor_t *)cdcd; 3290 maxb = esscd->bMaxBurst; 3291 } 3292 3293 no_cdcd: 3294 /* 6.2.3.4, 4.8.2.4 */ 3295 if (USB_IS_SS(speed)) { 3296 /* USB 3.1 9.6.6 */ 3297 cp[1] |= XHCI_EPCTX_1_MAXP_SIZE_SET(mps); 3298 /* USB 3.1 9.6.7 */ 3299 cp[1] |= XHCI_EPCTX_1_MAXB_SET(maxb); 3300 #ifdef notyet 3301 if (xfertype == UE_ISOCHRONOUS) { 3302 } 3303 if (XHCI_HCC2_LEC(sc->sc_hcc2) != 0) { 3304 /* use ESIT */ 3305 cp[4] |= XHCI_EPCTX_4_MAX_ESIT_PAYLOAD_SET(x); 3306 cp[0] |= XHCI_EPCTX_0_MAX_ESIT_PAYLOAD_HI_SET(x); 3307 3308 /* XXX if LEC = 1, set ESIT instead */ 3309 cp[0] |= XHCI_EPCTX_0_MULT_SET(0); 3310 } else { 3311 /* use ival */ 3312 } 3313 #endif 3314 } else { 3315 /* USB 2.0 9.6.6 */ 3316 cp[1] |= XHCI_EPCTX_1_MAXP_SIZE_SET(UE_GET_SIZE(mps)); 3317 3318 /* 6.2.3.4 */ 3319 if (speed == USB_SPEED_HIGH && 3320 (xfertype == UE_ISOCHRONOUS || xfertype == UE_INTERRUPT)) { 3321 maxb = UE_GET_TRANS(mps); 3322 } else { 3323 /* LS/FS or HS CTRL or HS BULK */ 3324 maxb = 0; 3325 } 3326 cp[1] |= XHCI_EPCTX_1_MAXB_SET(maxb); 3327 } 3328 } 3329 3330 /* 3331 * Convert endpoint bInterval value to endpoint context interval value 3332 * for Interrupt pipe. 3333 * xHCI 6.2.3.6 Table 65, USB 2.0 9.6.6 3334 */ 3335 static uint32_t 3336 xhci_bival2ival(uint32_t ival, uint32_t speed) 3337 { 3338 if (speed == USB_SPEED_LOW || speed == USB_SPEED_FULL) { 3339 int i; 3340 3341 /* 3342 * round ival down to "the nearest base 2 multiple of 3343 * bInterval * 8". 3344 * bInterval is at most 255 as its type is uByte. 3345 * 255(ms) = 2040(x 125us) < 2^11, so start with 10. 3346 */ 3347 for (i = 10; i > 0; i--) { 3348 if ((ival * 8) >= (1 << i)) 3349 break; 3350 } 3351 ival = i; 3352 } else { 3353 /* Interval = bInterval-1 for SS/HS */ 3354 ival--; 3355 } 3356 3357 return ival; 3358 } 3359 3360 /* ----- */ 3361 3362 static void 3363 xhci_noop(struct usbd_pipe *pipe) 3364 { 3365 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3366 } 3367 3368 /* 3369 * Process root hub request. 3370 */ 3371 static int 3372 xhci_roothub_ctrl(struct usbd_bus *bus, usb_device_request_t *req, 3373 void *buf, int buflen) 3374 { 3375 struct xhci_softc * const sc = XHCI_BUS2SC(bus); 3376 usb_port_status_t ps; 3377 int l, totlen = 0; 3378 uint16_t len, value, index; 3379 int port, i; 3380 uint32_t v; 3381 3382 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3383 3384 if (sc->sc_dying) 3385 return -1; 3386 3387 size_t bn = bus == &sc->sc_bus ? 0 : 1; 3388 3389 len = UGETW(req->wLength); 3390 value = UGETW(req->wValue); 3391 index = UGETW(req->wIndex); 3392 3393 DPRINTFN(12, "rhreq: %04jx %04jx %04jx %04jx", 3394 req->bmRequestType | (req->bRequest << 8), value, index, len); 3395 3396 #define C(x,y) ((x) | ((y) << 8)) 3397 switch (C(req->bRequest, req->bmRequestType)) { 3398 case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): 3399 DPRINTFN(8, "getdesc: wValue=0x%04jx", value, 0, 0, 0); 3400 if (len == 0) 3401 break; 3402 switch (value) { 3403 #define sd ((usb_string_descriptor_t *)buf) 3404 case C(2, UDESC_STRING): 3405 /* Product */ 3406 totlen = usb_makestrdesc(sd, len, "xHCI root hub"); 3407 break; 3408 #undef sd 3409 default: 3410 /* default from usbroothub */ 3411 return buflen; 3412 } 3413 break; 3414 3415 /* Hub requests */ 3416 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): 3417 break; 3418 /* Clear Port Feature request */ 3419 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): { 3420 const size_t cp = xhci_rhport2ctlrport(sc, bn, index); 3421 3422 DPRINTFN(4, "UR_CLEAR_PORT_FEAT bp=%jd feat=%jd bus=%jd cp=%jd", 3423 index, value, bn, cp); 3424 if (index < 1 || index > sc->sc_rhportcount[bn]) { 3425 return -1; 3426 } 3427 port = XHCI_PORTSC(cp); 3428 v = xhci_op_read_4(sc, port); 3429 DPRINTFN(4, "portsc=0x%08jx", v, 0, 0, 0); 3430 v &= ~XHCI_PS_CLEAR; 3431 switch (value) { 3432 case UHF_PORT_ENABLE: 3433 xhci_op_write_4(sc, port, v & ~XHCI_PS_PED); 3434 break; 3435 case UHF_PORT_SUSPEND: 3436 return -1; 3437 case UHF_PORT_POWER: 3438 break; 3439 case UHF_PORT_TEST: 3440 case UHF_PORT_INDICATOR: 3441 return -1; 3442 case UHF_C_PORT_CONNECTION: 3443 xhci_op_write_4(sc, port, v | XHCI_PS_CSC); 3444 break; 3445 case UHF_C_PORT_ENABLE: 3446 case UHF_C_PORT_SUSPEND: 3447 case UHF_C_PORT_OVER_CURRENT: 3448 return -1; 3449 case UHF_C_BH_PORT_RESET: 3450 xhci_op_write_4(sc, port, v | XHCI_PS_WRC); 3451 break; 3452 case UHF_C_PORT_RESET: 3453 xhci_op_write_4(sc, port, v | XHCI_PS_PRC); 3454 break; 3455 case UHF_C_PORT_LINK_STATE: 3456 xhci_op_write_4(sc, port, v | XHCI_PS_PLC); 3457 break; 3458 case UHF_C_PORT_CONFIG_ERROR: 3459 xhci_op_write_4(sc, port, v | XHCI_PS_CEC); 3460 break; 3461 default: 3462 return -1; 3463 } 3464 break; 3465 } 3466 case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): 3467 if (len == 0) 3468 break; 3469 if ((value & 0xff) != 0) { 3470 return -1; 3471 } 3472 usb_hub_descriptor_t hubd; 3473 3474 totlen = min(buflen, sizeof(hubd)); 3475 memcpy(&hubd, buf, totlen); 3476 hubd.bNbrPorts = sc->sc_rhportcount[bn]; 3477 USETW(hubd.wHubCharacteristics, UHD_PWR_NO_SWITCH); 3478 hubd.bPwrOn2PwrGood = 200; 3479 for (i = 0, l = sc->sc_rhportcount[bn]; l > 0; i++, l -= 8) { 3480 /* XXX can't find out? */ 3481 hubd.DeviceRemovable[i++] = 0; 3482 } 3483 hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE + i; 3484 totlen = min(totlen, hubd.bDescLength); 3485 memcpy(buf, &hubd, totlen); 3486 break; 3487 case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): 3488 if (len != 4) { 3489 return -1; 3490 } 3491 memset(buf, 0, len); /* ? XXX */ 3492 totlen = len; 3493 break; 3494 /* Get Port Status request */ 3495 case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): { 3496 const size_t cp = xhci_rhport2ctlrport(sc, bn, index); 3497 3498 DPRINTFN(8, "get port status bn=%jd i=%jd cp=%ju", 3499 bn, index, cp, 0); 3500 if (index < 1 || index > sc->sc_rhportcount[bn]) { 3501 return -1; 3502 } 3503 if (len != 4) { 3504 return -1; 3505 } 3506 v = xhci_op_read_4(sc, XHCI_PORTSC(cp)); 3507 DPRINTFN(4, "getrhportsc %jd %08jx", cp, v, 0, 0); 3508 i = xhci_xspeed2psspeed(XHCI_PS_SPEED_GET(v)); 3509 if (v & XHCI_PS_CCS) i |= UPS_CURRENT_CONNECT_STATUS; 3510 if (v & XHCI_PS_PED) i |= UPS_PORT_ENABLED; 3511 if (v & XHCI_PS_OCA) i |= UPS_OVERCURRENT_INDICATOR; 3512 //if (v & XHCI_PS_SUSP) i |= UPS_SUSPEND; 3513 if (v & XHCI_PS_PR) i |= UPS_RESET; 3514 if (v & XHCI_PS_PP) { 3515 if (i & UPS_OTHER_SPEED) 3516 i |= UPS_PORT_POWER_SS; 3517 else 3518 i |= UPS_PORT_POWER; 3519 } 3520 if (i & UPS_OTHER_SPEED) 3521 i |= UPS_PORT_LS_SET(XHCI_PS_PLS_GET(v)); 3522 if (sc->sc_vendor_port_status) 3523 i = sc->sc_vendor_port_status(sc, v, i); 3524 USETW(ps.wPortStatus, i); 3525 i = 0; 3526 if (v & XHCI_PS_CSC) i |= UPS_C_CONNECT_STATUS; 3527 if (v & XHCI_PS_PEC) i |= UPS_C_PORT_ENABLED; 3528 if (v & XHCI_PS_OCC) i |= UPS_C_OVERCURRENT_INDICATOR; 3529 if (v & XHCI_PS_PRC) i |= UPS_C_PORT_RESET; 3530 if (v & XHCI_PS_WRC) i |= UPS_C_BH_PORT_RESET; 3531 if (v & XHCI_PS_PLC) i |= UPS_C_PORT_LINK_STATE; 3532 if (v & XHCI_PS_CEC) i |= UPS_C_PORT_CONFIG_ERROR; 3533 USETW(ps.wPortChange, i); 3534 totlen = min(len, sizeof(ps)); 3535 memcpy(buf, &ps, totlen); 3536 break; 3537 } 3538 case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): 3539 return -1; 3540 case C(UR_SET_HUB_DEPTH, UT_WRITE_CLASS_DEVICE): 3541 break; 3542 case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): 3543 break; 3544 /* Set Port Feature request */ 3545 case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): { 3546 int optval = (index >> 8) & 0xff; 3547 index &= 0xff; 3548 if (index < 1 || index > sc->sc_rhportcount[bn]) { 3549 return -1; 3550 } 3551 3552 const size_t cp = xhci_rhport2ctlrport(sc, bn, index); 3553 3554 port = XHCI_PORTSC(cp); 3555 v = xhci_op_read_4(sc, port); 3556 DPRINTFN(4, "index %jd cp %jd portsc=0x%08jx", index, cp, v, 0); 3557 v &= ~XHCI_PS_CLEAR; 3558 switch (value) { 3559 case UHF_PORT_ENABLE: 3560 xhci_op_write_4(sc, port, v | XHCI_PS_PED); 3561 break; 3562 case UHF_PORT_SUSPEND: 3563 /* XXX suspend */ 3564 break; 3565 case UHF_PORT_RESET: 3566 v &= ~(XHCI_PS_PED | XHCI_PS_PR); 3567 xhci_op_write_4(sc, port, v | XHCI_PS_PR); 3568 /* Wait for reset to complete. */ 3569 usb_delay_ms(&sc->sc_bus, USB_PORT_ROOT_RESET_DELAY); 3570 if (sc->sc_dying) { 3571 return -1; 3572 } 3573 v = xhci_op_read_4(sc, port); 3574 if (v & XHCI_PS_PR) { 3575 xhci_op_write_4(sc, port, v & ~XHCI_PS_PR); 3576 usb_delay_ms(&sc->sc_bus, 10); 3577 /* XXX */ 3578 } 3579 break; 3580 case UHF_PORT_POWER: 3581 /* XXX power control */ 3582 break; 3583 /* XXX more */ 3584 case UHF_C_PORT_RESET: 3585 xhci_op_write_4(sc, port, v | XHCI_PS_PRC); 3586 break; 3587 case UHF_PORT_U1_TIMEOUT: 3588 if (XHCI_PS_SPEED_GET(v) < XHCI_PS_SPEED_SS) { 3589 return -1; 3590 } 3591 port = XHCI_PORTPMSC(cp); 3592 v = xhci_op_read_4(sc, port); 3593 DPRINTFN(4, "index %jd cp %jd portpmsc=0x%08jx", 3594 index, cp, v, 0); 3595 v &= ~XHCI_PM3_U1TO_SET(0xff); 3596 v |= XHCI_PM3_U1TO_SET(optval); 3597 xhci_op_write_4(sc, port, v); 3598 break; 3599 case UHF_PORT_U2_TIMEOUT: 3600 if (XHCI_PS_SPEED_GET(v) < XHCI_PS_SPEED_SS) { 3601 return -1; 3602 } 3603 port = XHCI_PORTPMSC(cp); 3604 v = xhci_op_read_4(sc, port); 3605 DPRINTFN(4, "index %jd cp %jd portpmsc=0x%08jx", 3606 index, cp, v, 0); 3607 v &= ~XHCI_PM3_U2TO_SET(0xff); 3608 v |= XHCI_PM3_U2TO_SET(optval); 3609 xhci_op_write_4(sc, port, v); 3610 break; 3611 default: 3612 return -1; 3613 } 3614 } 3615 break; 3616 case C(UR_CLEAR_TT_BUFFER, UT_WRITE_CLASS_OTHER): 3617 case C(UR_RESET_TT, UT_WRITE_CLASS_OTHER): 3618 case C(UR_GET_TT_STATE, UT_READ_CLASS_OTHER): 3619 case C(UR_STOP_TT, UT_WRITE_CLASS_OTHER): 3620 break; 3621 default: 3622 /* default from usbroothub */ 3623 return buflen; 3624 } 3625 3626 return totlen; 3627 } 3628 3629 /* root hub interrupt */ 3630 3631 static usbd_status 3632 xhci_root_intr_transfer(struct usbd_xfer *xfer) 3633 { 3634 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3635 usbd_status err; 3636 3637 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3638 3639 /* Insert last in queue. */ 3640 mutex_enter(&sc->sc_lock); 3641 err = usb_insert_transfer(xfer); 3642 mutex_exit(&sc->sc_lock); 3643 if (err) 3644 return err; 3645 3646 /* Pipe isn't running, start first */ 3647 return xhci_root_intr_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue)); 3648 } 3649 3650 /* Wait for roothub port status/change */ 3651 static usbd_status 3652 xhci_root_intr_start(struct usbd_xfer *xfer) 3653 { 3654 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3655 const size_t bn = XHCI_XFER2BUS(xfer) == &sc->sc_bus ? 0 : 1; 3656 3657 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3658 3659 if (sc->sc_dying) 3660 return USBD_IOERROR; 3661 3662 mutex_enter(&sc->sc_lock); 3663 sc->sc_intrxfer[bn] = xfer; 3664 mutex_exit(&sc->sc_lock); 3665 3666 return USBD_IN_PROGRESS; 3667 } 3668 3669 static void 3670 xhci_root_intr_abort(struct usbd_xfer *xfer) 3671 { 3672 struct xhci_softc * const sc __diagused = XHCI_XFER2SC(xfer); 3673 3674 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3675 3676 KASSERT(mutex_owned(&sc->sc_lock)); 3677 KASSERT(xfer->ux_pipe->up_intrxfer == xfer); 3678 3679 xfer->ux_status = USBD_CANCELLED; 3680 usb_transfer_complete(xfer); 3681 } 3682 3683 static void 3684 xhci_root_intr_close(struct usbd_pipe *pipe) 3685 { 3686 struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 3687 const struct usbd_xfer *xfer = pipe->up_intrxfer; 3688 const size_t bn = XHCI_XFER2BUS(xfer) == &sc->sc_bus ? 0 : 1; 3689 3690 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3691 3692 KASSERT(mutex_owned(&sc->sc_lock)); 3693 3694 sc->sc_intrxfer[bn] = NULL; 3695 } 3696 3697 static void 3698 xhci_root_intr_done(struct usbd_xfer *xfer) 3699 { 3700 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3701 3702 } 3703 3704 /* -------------- */ 3705 /* device control */ 3706 3707 static usbd_status 3708 xhci_device_ctrl_transfer(struct usbd_xfer *xfer) 3709 { 3710 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3711 usbd_status err; 3712 3713 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3714 3715 /* Insert last in queue. */ 3716 mutex_enter(&sc->sc_lock); 3717 err = usb_insert_transfer(xfer); 3718 mutex_exit(&sc->sc_lock); 3719 if (err) 3720 return err; 3721 3722 /* Pipe isn't running, start first */ 3723 return xhci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue)); 3724 } 3725 3726 static usbd_status 3727 xhci_device_ctrl_start(struct usbd_xfer *xfer) 3728 { 3729 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3730 struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; 3731 const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); 3732 struct xhci_ring * const tr = &xs->xs_ep[dci].xe_tr; 3733 struct xhci_xfer * const xx = XHCI_XFER2XXFER(xfer); 3734 usb_device_request_t * const req = &xfer->ux_request; 3735 const int isread = usbd_xfer_isread(xfer); 3736 const uint32_t len = UGETW(req->wLength); 3737 usb_dma_t * const dma = &xfer->ux_dmabuf; 3738 uint64_t parameter; 3739 uint32_t status; 3740 uint32_t control; 3741 u_int i; 3742 3743 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3744 DPRINTFN(12, "req: %04jx %04jx %04jx %04jx", 3745 req->bmRequestType | (req->bRequest << 8), UGETW(req->wValue), 3746 UGETW(req->wIndex), UGETW(req->wLength)); 3747 3748 /* we rely on the bottom bits for extra info */ 3749 KASSERTMSG(((uintptr_t)xfer & 0x3) == 0x0, "xfer %zx", 3750 (uintptr_t) xfer); 3751 3752 KASSERT((xfer->ux_rqflags & URQ_REQUEST) != 0); 3753 3754 i = 0; 3755 3756 /* setup phase */ 3757 memcpy(¶meter, req, sizeof(parameter)); 3758 status = XHCI_TRB_2_IRQ_SET(0) | XHCI_TRB_2_BYTES_SET(sizeof(*req)); 3759 control = ((len == 0) ? XHCI_TRB_3_TRT_NONE : 3760 (isread ? XHCI_TRB_3_TRT_IN : XHCI_TRB_3_TRT_OUT)) | 3761 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_SETUP_STAGE) | 3762 XHCI_TRB_3_IDT_BIT; 3763 xhci_trb_put(&xx->xx_trb[i++], parameter, status, control); 3764 3765 if (len != 0) { 3766 /* data phase */ 3767 parameter = DMAADDR(dma, 0); 3768 KASSERTMSG(len <= 0x10000, "len %d", len); 3769 status = XHCI_TRB_2_IRQ_SET(0) | 3770 XHCI_TRB_2_TDSZ_SET(1) | 3771 XHCI_TRB_2_BYTES_SET(len); 3772 control = (isread ? XHCI_TRB_3_DIR_IN : 0) | 3773 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_DATA_STAGE) | 3774 (usbd_xfer_isread(xfer) ? XHCI_TRB_3_ISP_BIT : 0) | 3775 XHCI_TRB_3_IOC_BIT; 3776 xhci_trb_put(&xx->xx_trb[i++], parameter, status, control); 3777 } 3778 3779 parameter = 0; 3780 status = XHCI_TRB_2_IRQ_SET(0); 3781 /* the status stage has inverted direction */ 3782 control = ((isread && (len > 0)) ? 0 : XHCI_TRB_3_DIR_IN) | 3783 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_STATUS_STAGE) | 3784 XHCI_TRB_3_IOC_BIT; 3785 xhci_trb_put(&xx->xx_trb[i++], parameter, status, control); 3786 3787 mutex_enter(&tr->xr_lock); 3788 xhci_ring_put(sc, tr, xfer, xx->xx_trb, i); 3789 mutex_exit(&tr->xr_lock); 3790 3791 xhci_db_write_4(sc, XHCI_DOORBELL(xs->xs_idx), dci); 3792 3793 if (xfer->ux_timeout && !xhci_polling_p(sc)) { 3794 callout_reset(&xfer->ux_callout, mstohz(xfer->ux_timeout), 3795 xhci_timeout, xfer); 3796 } 3797 3798 return USBD_IN_PROGRESS; 3799 } 3800 3801 static void 3802 xhci_device_ctrl_done(struct usbd_xfer *xfer) 3803 { 3804 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3805 usb_device_request_t *req = &xfer->ux_request; 3806 int len = UGETW(req->wLength); 3807 int rd = req->bmRequestType & UT_READ; 3808 3809 if (len) 3810 usb_syncmem(&xfer->ux_dmabuf, 0, len, 3811 rd ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 3812 } 3813 3814 static void 3815 xhci_device_ctrl_abort(struct usbd_xfer *xfer) 3816 { 3817 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3818 3819 xhci_abort_xfer(xfer, USBD_CANCELLED); 3820 } 3821 3822 static void 3823 xhci_device_ctrl_close(struct usbd_pipe *pipe) 3824 { 3825 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3826 3827 xhci_close_pipe(pipe); 3828 } 3829 3830 /* ------------------ */ 3831 /* device isochronous */ 3832 3833 /* ----------- */ 3834 /* device bulk */ 3835 3836 static usbd_status 3837 xhci_device_bulk_transfer(struct usbd_xfer *xfer) 3838 { 3839 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3840 usbd_status err; 3841 3842 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3843 3844 /* Insert last in queue. */ 3845 mutex_enter(&sc->sc_lock); 3846 err = usb_insert_transfer(xfer); 3847 mutex_exit(&sc->sc_lock); 3848 if (err) 3849 return err; 3850 3851 /* 3852 * Pipe isn't running (otherwise err would be USBD_INPROG), 3853 * so start it first. 3854 */ 3855 return xhci_device_bulk_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue)); 3856 } 3857 3858 static usbd_status 3859 xhci_device_bulk_start(struct usbd_xfer *xfer) 3860 { 3861 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3862 struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; 3863 const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); 3864 struct xhci_ring * const tr = &xs->xs_ep[dci].xe_tr; 3865 struct xhci_xfer * const xx = XHCI_XFER2XXFER(xfer); 3866 const uint32_t len = xfer->ux_length; 3867 usb_dma_t * const dma = &xfer->ux_dmabuf; 3868 uint64_t parameter; 3869 uint32_t status; 3870 uint32_t control; 3871 u_int i = 0; 3872 3873 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3874 3875 DPRINTFN(15, "%#jx slot %ju dci %ju", (uintptr_t)xfer, xs->xs_idx, dci, 3876 0); 3877 3878 if (sc->sc_dying) 3879 return USBD_IOERROR; 3880 3881 KASSERT((xfer->ux_rqflags & URQ_REQUEST) == 0); 3882 3883 parameter = DMAADDR(dma, 0); 3884 /* 3885 * XXX: (dsl) The physical buffer must not cross a 64k boundary. 3886 * If the user supplied buffer crosses such a boundary then 2 3887 * (or more) TRB should be used. 3888 * If multiple TRB are used the td_size field must be set correctly. 3889 * For v1.0 devices (like ivy bridge) this is the number of usb data 3890 * blocks needed to complete the transfer. 3891 * Setting it to 1 in the last TRB causes an extra zero-length 3892 * data block be sent. 3893 * The earlier documentation differs, I don't know how it behaves. 3894 */ 3895 KASSERTMSG(len <= 0x10000, "len %d", len); 3896 status = XHCI_TRB_2_IRQ_SET(0) | 3897 XHCI_TRB_2_TDSZ_SET(1) | 3898 XHCI_TRB_2_BYTES_SET(len); 3899 control = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_NORMAL) | 3900 (usbd_xfer_isread(xfer) ? XHCI_TRB_3_ISP_BIT : 0) | 3901 XHCI_TRB_3_IOC_BIT; 3902 xhci_trb_put(&xx->xx_trb[i++], parameter, status, control); 3903 3904 mutex_enter(&tr->xr_lock); 3905 xhci_ring_put(sc, tr, xfer, xx->xx_trb, i); 3906 mutex_exit(&tr->xr_lock); 3907 3908 xhci_db_write_4(sc, XHCI_DOORBELL(xs->xs_idx), dci); 3909 3910 if (xfer->ux_timeout && !xhci_polling_p(sc)) { 3911 callout_reset(&xfer->ux_callout, mstohz(xfer->ux_timeout), 3912 xhci_timeout, xfer); 3913 } 3914 3915 return USBD_IN_PROGRESS; 3916 } 3917 3918 static void 3919 xhci_device_bulk_done(struct usbd_xfer *xfer) 3920 { 3921 #ifdef USB_DEBUG 3922 struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; 3923 const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); 3924 #endif 3925 const int isread = usbd_xfer_isread(xfer); 3926 3927 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3928 3929 DPRINTFN(15, "%#jx slot %ju dci %ju", (uintptr_t)xfer, xs->xs_idx, dci, 3930 0); 3931 3932 usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_length, 3933 isread ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 3934 } 3935 3936 static void 3937 xhci_device_bulk_abort(struct usbd_xfer *xfer) 3938 { 3939 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3940 3941 xhci_abort_xfer(xfer, USBD_CANCELLED); 3942 } 3943 3944 static void 3945 xhci_device_bulk_close(struct usbd_pipe *pipe) 3946 { 3947 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3948 3949 xhci_close_pipe(pipe); 3950 } 3951 3952 /* ---------------- */ 3953 /* device interrupt */ 3954 3955 static usbd_status 3956 xhci_device_intr_transfer(struct usbd_xfer *xfer) 3957 { 3958 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3959 usbd_status err; 3960 3961 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3962 3963 /* Insert last in queue. */ 3964 mutex_enter(&sc->sc_lock); 3965 err = usb_insert_transfer(xfer); 3966 mutex_exit(&sc->sc_lock); 3967 if (err) 3968 return err; 3969 3970 /* 3971 * Pipe isn't running (otherwise err would be USBD_INPROG), 3972 * so start it first. 3973 */ 3974 return xhci_device_intr_start(SIMPLEQ_FIRST(&xfer->ux_pipe->up_queue)); 3975 } 3976 3977 static usbd_status 3978 xhci_device_intr_start(struct usbd_xfer *xfer) 3979 { 3980 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 3981 struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; 3982 const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); 3983 struct xhci_ring * const tr = &xs->xs_ep[dci].xe_tr; 3984 struct xhci_xfer * const xx = XHCI_XFER2XXFER(xfer); 3985 const uint32_t len = xfer->ux_length; 3986 usb_dma_t * const dma = &xfer->ux_dmabuf; 3987 uint64_t parameter; 3988 uint32_t status; 3989 uint32_t control; 3990 u_int i = 0; 3991 3992 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 3993 3994 DPRINTFN(15, "%#jx slot %ju dci %ju", (uintptr_t)xfer, xs->xs_idx, dci, 3995 0); 3996 3997 if (sc->sc_dying) 3998 return USBD_IOERROR; 3999 4000 KASSERT((xfer->ux_rqflags & URQ_REQUEST) == 0); 4001 4002 parameter = DMAADDR(dma, 0); 4003 KASSERTMSG(len <= 0x10000, "len %d", len); 4004 status = XHCI_TRB_2_IRQ_SET(0) | 4005 XHCI_TRB_2_TDSZ_SET(1) | 4006 XHCI_TRB_2_BYTES_SET(len); 4007 control = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_NORMAL) | 4008 (usbd_xfer_isread(xfer) ? XHCI_TRB_3_ISP_BIT : 0) | 4009 XHCI_TRB_3_IOC_BIT; 4010 xhci_trb_put(&xx->xx_trb[i++], parameter, status, control); 4011 4012 mutex_enter(&tr->xr_lock); 4013 xhci_ring_put(sc, tr, xfer, xx->xx_trb, i); 4014 mutex_exit(&tr->xr_lock); 4015 4016 xhci_db_write_4(sc, XHCI_DOORBELL(xs->xs_idx), dci); 4017 4018 if (xfer->ux_timeout && !xhci_polling_p(sc)) { 4019 callout_reset(&xfer->ux_callout, mstohz(xfer->ux_timeout), 4020 xhci_timeout, xfer); 4021 } 4022 4023 return USBD_IN_PROGRESS; 4024 } 4025 4026 static void 4027 xhci_device_intr_done(struct usbd_xfer *xfer) 4028 { 4029 struct xhci_softc * const sc __diagused = XHCI_XFER2SC(xfer); 4030 #ifdef USB_DEBUG 4031 struct xhci_slot * const xs = xfer->ux_pipe->up_dev->ud_hcpriv; 4032 const u_int dci = xhci_ep_get_dci(xfer->ux_pipe->up_endpoint->ue_edesc); 4033 #endif 4034 const int isread = usbd_xfer_isread(xfer); 4035 4036 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 4037 4038 DPRINTFN(15, "%#jx slot %ju dci %ju", (uintptr_t)xfer, xs->xs_idx, dci, 4039 0); 4040 4041 KASSERT(xhci_polling_p(sc) || mutex_owned(&sc->sc_lock)); 4042 4043 usb_syncmem(&xfer->ux_dmabuf, 0, xfer->ux_length, 4044 isread ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 4045 } 4046 4047 static void 4048 xhci_device_intr_abort(struct usbd_xfer *xfer) 4049 { 4050 struct xhci_softc * const sc __diagused = XHCI_XFER2SC(xfer); 4051 4052 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 4053 4054 KASSERT(mutex_owned(&sc->sc_lock)); 4055 DPRINTFN(15, "%#jx", (uintptr_t)xfer, 0, 0, 0); 4056 KASSERT(xfer->ux_pipe->up_intrxfer == xfer); 4057 xhci_abort_xfer(xfer, USBD_CANCELLED); 4058 } 4059 4060 static void 4061 xhci_device_intr_close(struct usbd_pipe *pipe) 4062 { 4063 //struct xhci_softc * const sc = XHCI_PIPE2SC(pipe); 4064 4065 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 4066 DPRINTFN(15, "%#jx", (uintptr_t)pipe, 0, 0, 0); 4067 4068 xhci_close_pipe(pipe); 4069 } 4070 4071 /* ------------ */ 4072 4073 static void 4074 xhci_timeout(void *addr) 4075 { 4076 struct xhci_xfer * const xx = addr; 4077 struct usbd_xfer * const xfer = &xx->xx_xfer; 4078 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 4079 4080 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 4081 4082 if (sc->sc_dying) { 4083 return; 4084 } 4085 4086 usb_init_task(&xx->xx_abort_task, xhci_timeout_task, addr, 4087 USB_TASKQ_MPSAFE); 4088 usb_add_task(xx->xx_xfer.ux_pipe->up_dev, &xx->xx_abort_task, 4089 USB_TASKQ_HC); 4090 } 4091 4092 static void 4093 xhci_timeout_task(void *addr) 4094 { 4095 struct usbd_xfer * const xfer = addr; 4096 struct xhci_softc * const sc = XHCI_XFER2SC(xfer); 4097 4098 XHCIHIST_FUNC(); XHCIHIST_CALLED(); 4099 4100 mutex_enter(&sc->sc_lock); 4101 xhci_abort_xfer(xfer, USBD_TIMEOUT); 4102 mutex_exit(&sc->sc_lock); 4103 } 4104