1 /* $NetBSD: usbdi.c,v 1.161 2014/08/05 06:35:24 skrll Exp $ */ 2 3 /* 4 * Copyright (c) 1998, 2012 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Lennart Augustsson (lennart@augustsson.net) at 9 * Carlstedt Research & Technology and Matthew R. Green (mrg@eterna.com.au). 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #include <sys/cdefs.h> 34 __KERNEL_RCSID(0, "$NetBSD: usbdi.c,v 1.161 2014/08/05 06:35:24 skrll Exp $"); 35 36 #ifdef _KERNEL_OPT 37 #include "opt_compat_netbsd.h" 38 #endif 39 40 #include <sys/param.h> 41 #include <sys/systm.h> 42 #include <sys/kernel.h> 43 #include <sys/device.h> 44 #include <sys/malloc.h> 45 #include <sys/proc.h> 46 #include <sys/bus.h> 47 #include <sys/cpu.h> 48 49 #include <dev/usb/usb.h> 50 #include <dev/usb/usbdi.h> 51 #include <dev/usb/usbdi_util.h> 52 #include <dev/usb/usbdivar.h> 53 #include <dev/usb/usb_mem.h> 54 #include <dev/usb/usb_quirks.h> 55 56 /* UTF-8 encoding stuff */ 57 #include <fs/unicode.h> 58 59 #ifdef USB_DEBUG 60 #define DPRINTF(x) if (usbdebug) printf x 61 #define DPRINTFN(n,x) if (usbdebug>(n)) printf x 62 extern int usbdebug; 63 #else 64 #define DPRINTF(x) 65 #define DPRINTFN(n,x) 66 #endif 67 68 Static usbd_status usbd_ar_pipe(usbd_pipe_handle); 69 Static void usbd_start_next(usbd_pipe_handle); 70 Static usbd_status usbd_open_pipe_ival 71 (usbd_interface_handle, u_int8_t, u_int8_t, usbd_pipe_handle *, int); 72 73 static inline int 74 usbd_xfer_isread(usbd_xfer_handle xfer) 75 { 76 if (xfer->rqflags & URQ_REQUEST) 77 return (xfer->request.bmRequestType & UT_READ); 78 else 79 return (xfer->pipe->endpoint->edesc->bEndpointAddress & 80 UE_DIR_IN); 81 } 82 83 #if defined(USB_DEBUG) || defined(EHCI_DEBUG) || defined(OHCI_DEBUG) 84 void 85 usbd_dump_iface(struct usbd_interface *iface) 86 { 87 printf("usbd_dump_iface: iface=%p\n", iface); 88 if (iface == NULL) 89 return; 90 printf(" device=%p idesc=%p index=%d altindex=%d priv=%p\n", 91 iface->device, iface->idesc, iface->index, iface->altindex, 92 iface->priv); 93 } 94 95 void 96 usbd_dump_device(struct usbd_device *dev) 97 { 98 printf("usbd_dump_device: dev=%p\n", dev); 99 if (dev == NULL) 100 return; 101 printf(" bus=%p default_pipe=%p\n", dev->bus, dev->default_pipe); 102 printf(" address=%d config=%d depth=%d speed=%d self_powered=%d " 103 "power=%d langid=%d\n", 104 dev->address, dev->config, dev->depth, dev->speed, 105 dev->self_powered, dev->power, dev->langid); 106 } 107 108 void 109 usbd_dump_endpoint(struct usbd_endpoint *endp) 110 { 111 printf("usbd_dump_endpoint: endp=%p\n", endp); 112 if (endp == NULL) 113 return; 114 printf(" edesc=%p refcnt=%d\n", endp->edesc, endp->refcnt); 115 if (endp->edesc) 116 printf(" bEndpointAddress=0x%02x\n", 117 endp->edesc->bEndpointAddress); 118 } 119 120 void 121 usbd_dump_queue(usbd_pipe_handle pipe) 122 { 123 usbd_xfer_handle xfer; 124 125 printf("usbd_dump_queue: pipe=%p\n", pipe); 126 SIMPLEQ_FOREACH(xfer, &pipe->queue, next) { 127 printf(" xfer=%p\n", xfer); 128 } 129 } 130 131 void 132 usbd_dump_pipe(usbd_pipe_handle pipe) 133 { 134 printf("usbd_dump_pipe: pipe=%p\n", pipe); 135 if (pipe == NULL) 136 return; 137 usbd_dump_iface(pipe->iface); 138 usbd_dump_device(pipe->device); 139 usbd_dump_endpoint(pipe->endpoint); 140 printf(" (usbd_dump_pipe:)\n refcnt=%d running=%d aborting=%d\n", 141 pipe->refcnt, pipe->running, pipe->aborting); 142 printf(" intrxfer=%p, repeat=%d, interval=%d\n", 143 pipe->intrxfer, pipe->repeat, pipe->interval); 144 } 145 #endif 146 147 usbd_status 148 usbd_open_pipe(usbd_interface_handle iface, u_int8_t address, 149 u_int8_t flags, usbd_pipe_handle *pipe) 150 { 151 return (usbd_open_pipe_ival(iface, address, flags, pipe, 152 USBD_DEFAULT_INTERVAL)); 153 } 154 155 usbd_status 156 usbd_open_pipe_ival(usbd_interface_handle iface, u_int8_t address, 157 u_int8_t flags, usbd_pipe_handle *pipe, int ival) 158 { 159 usbd_pipe_handle p; 160 struct usbd_endpoint *ep; 161 usbd_status err; 162 int i; 163 164 DPRINTFN(3,("usbd_open_pipe: iface=%p address=0x%x flags=0x%x\n", 165 iface, address, flags)); 166 167 for (i = 0; i < iface->idesc->bNumEndpoints; i++) { 168 ep = &iface->endpoints[i]; 169 if (ep->edesc == NULL) 170 return (USBD_IOERROR); 171 if (ep->edesc->bEndpointAddress == address) 172 goto found; 173 } 174 return (USBD_BAD_ADDRESS); 175 found: 176 if ((flags & USBD_EXCLUSIVE_USE) && ep->refcnt != 0) 177 return (USBD_IN_USE); 178 err = usbd_setup_pipe_flags(iface->device, iface, ep, ival, &p, flags); 179 if (err) 180 return (err); 181 LIST_INSERT_HEAD(&iface->pipes, p, next); 182 *pipe = p; 183 return (USBD_NORMAL_COMPLETION); 184 } 185 186 usbd_status 187 usbd_open_pipe_intr(usbd_interface_handle iface, u_int8_t address, 188 u_int8_t flags, usbd_pipe_handle *pipe, 189 usbd_private_handle priv, void *buffer, u_int32_t len, 190 usbd_callback cb, int ival) 191 { 192 usbd_status err; 193 usbd_xfer_handle xfer; 194 usbd_pipe_handle ipipe; 195 196 DPRINTFN(3,("usbd_open_pipe_intr: address=0x%x flags=0x%x len=%d\n", 197 address, flags, len)); 198 199 err = usbd_open_pipe_ival(iface, address, 200 USBD_EXCLUSIVE_USE | (flags & USBD_MPSAFE), 201 &ipipe, ival); 202 if (err) 203 return (err); 204 xfer = usbd_alloc_xfer(iface->device); 205 if (xfer == NULL) { 206 err = USBD_NOMEM; 207 goto bad1; 208 } 209 usbd_setup_xfer(xfer, ipipe, priv, buffer, len, flags, 210 USBD_NO_TIMEOUT, cb); 211 ipipe->intrxfer = xfer; 212 ipipe->repeat = 1; 213 err = usbd_transfer(xfer); 214 *pipe = ipipe; 215 if (err != USBD_IN_PROGRESS) 216 goto bad2; 217 return (USBD_NORMAL_COMPLETION); 218 219 bad2: 220 ipipe->intrxfer = NULL; 221 ipipe->repeat = 0; 222 usbd_free_xfer(xfer); 223 bad1: 224 usbd_close_pipe(ipipe); 225 return (err); 226 } 227 228 usbd_status 229 usbd_close_pipe(usbd_pipe_handle pipe) 230 { 231 232 #ifdef DIAGNOSTIC 233 if (pipe == NULL) { 234 printf("usbd_close_pipe: pipe==NULL\n"); 235 return (USBD_NORMAL_COMPLETION); 236 } 237 #endif 238 239 usbd_lock_pipe(pipe); 240 if (--pipe->refcnt != 0) { 241 usbd_unlock_pipe(pipe); 242 return (USBD_NORMAL_COMPLETION); 243 } 244 if (! SIMPLEQ_EMPTY(&pipe->queue)) { 245 usbd_unlock_pipe(pipe); 246 return (USBD_PENDING_REQUESTS); 247 } 248 LIST_REMOVE(pipe, next); 249 pipe->endpoint->refcnt--; 250 pipe->methods->close(pipe); 251 usbd_unlock_pipe(pipe); 252 if (pipe->intrxfer != NULL) 253 usbd_free_xfer(pipe->intrxfer); 254 free(pipe, M_USB); 255 return (USBD_NORMAL_COMPLETION); 256 } 257 258 usbd_status 259 usbd_transfer(usbd_xfer_handle xfer) 260 { 261 usbd_pipe_handle pipe = xfer->pipe; 262 usb_dma_t *dmap = &xfer->dmabuf; 263 usbd_status err; 264 unsigned int size, flags; 265 266 DPRINTFN(5,("usbd_transfer: xfer=%p, flags=%#x, pipe=%p, running=%d\n", 267 xfer, xfer->flags, pipe, pipe->running)); 268 269 #ifdef USB_DEBUG 270 if (usbdebug > 5) 271 usbd_dump_queue(pipe); 272 #endif 273 xfer->done = 0; 274 275 if (pipe->aborting) 276 return (USBD_CANCELLED); 277 278 size = xfer->length; 279 /* If there is no buffer, allocate one. */ 280 if (!(xfer->rqflags & URQ_DEV_DMABUF) && size != 0) { 281 struct usbd_bus *bus = pipe->device->bus; 282 283 #ifdef DIAGNOSTIC 284 if (xfer->rqflags & URQ_AUTO_DMABUF) 285 printf("usbd_transfer: has old buffer!\n"); 286 #endif 287 err = bus->methods->allocm(bus, dmap, size); 288 if (err) 289 return (err); 290 xfer->rqflags |= URQ_AUTO_DMABUF; 291 } 292 293 flags = xfer->flags; 294 295 /* Copy data if going out. */ 296 if (!(flags & USBD_NO_COPY) && size != 0 && !usbd_xfer_isread(xfer)) 297 memcpy(KERNADDR(dmap, 0), xfer->buffer, size); 298 299 /* xfer is not valid after the transfer method unless synchronous */ 300 err = pipe->methods->transfer(xfer); 301 302 if (err != USBD_IN_PROGRESS && err) { 303 /* The transfer has not been queued, so free buffer. */ 304 if (xfer->rqflags & URQ_AUTO_DMABUF) { 305 struct usbd_bus *bus = pipe->device->bus; 306 307 bus->methods->freem(bus, &xfer->dmabuf); 308 xfer->rqflags &= ~URQ_AUTO_DMABUF; 309 } 310 } 311 312 if (!(flags & USBD_SYNCHRONOUS)) 313 return (err); 314 315 /* Sync transfer, wait for completion. */ 316 if (err != USBD_IN_PROGRESS) 317 return (err); 318 usbd_lock_pipe(pipe); 319 while (!xfer->done) { 320 if (pipe->device->bus->use_polling) 321 panic("usbd_transfer: not done"); 322 323 err = 0; 324 if ((flags & USBD_SYNCHRONOUS_SIG) != 0) { 325 err = cv_wait_sig(&xfer->cv, pipe->device->bus->lock); 326 } else { 327 cv_wait(&xfer->cv, pipe->device->bus->lock); 328 } 329 if (err) { 330 if (!xfer->done) 331 pipe->methods->abort(xfer); 332 break; 333 } 334 } 335 usbd_unlock_pipe(pipe); 336 return (xfer->status); 337 } 338 339 /* Like usbd_transfer(), but waits for completion. */ 340 usbd_status 341 usbd_sync_transfer(usbd_xfer_handle xfer) 342 { 343 xfer->flags |= USBD_SYNCHRONOUS; 344 return (usbd_transfer(xfer)); 345 } 346 347 /* Like usbd_transfer(), but waits for completion and listens for signals. */ 348 usbd_status 349 usbd_sync_transfer_sig(usbd_xfer_handle xfer) 350 { 351 xfer->flags |= USBD_SYNCHRONOUS | USBD_SYNCHRONOUS_SIG; 352 return (usbd_transfer(xfer)); 353 } 354 355 void * 356 usbd_alloc_buffer(usbd_xfer_handle xfer, u_int32_t size) 357 { 358 struct usbd_bus *bus = xfer->device->bus; 359 usbd_status err; 360 361 #ifdef DIAGNOSTIC 362 if (xfer->rqflags & (URQ_DEV_DMABUF | URQ_AUTO_DMABUF)) 363 printf("usbd_alloc_buffer: xfer already has a buffer\n"); 364 #endif 365 err = bus->methods->allocm(bus, &xfer->dmabuf, size); 366 if (err) 367 return (NULL); 368 xfer->rqflags |= URQ_DEV_DMABUF; 369 return (KERNADDR(&xfer->dmabuf, 0)); 370 } 371 372 void 373 usbd_free_buffer(usbd_xfer_handle xfer) 374 { 375 #ifdef DIAGNOSTIC 376 if (!(xfer->rqflags & (URQ_DEV_DMABUF | URQ_AUTO_DMABUF))) { 377 printf("usbd_free_buffer: no buffer\n"); 378 return; 379 } 380 #endif 381 xfer->rqflags &= ~(URQ_DEV_DMABUF | URQ_AUTO_DMABUF); 382 xfer->device->bus->methods->freem(xfer->device->bus, &xfer->dmabuf); 383 } 384 385 void * 386 usbd_get_buffer(usbd_xfer_handle xfer) 387 { 388 if (!(xfer->rqflags & URQ_DEV_DMABUF)) 389 return (NULL); 390 return (KERNADDR(&xfer->dmabuf, 0)); 391 } 392 393 usbd_xfer_handle 394 usbd_alloc_xfer(usbd_device_handle dev) 395 { 396 usbd_xfer_handle xfer; 397 398 xfer = dev->bus->methods->allocx(dev->bus); 399 if (xfer == NULL) 400 return (NULL); 401 xfer->device = dev; 402 callout_init(&xfer->timeout_handle, CALLOUT_MPSAFE); 403 cv_init(&xfer->cv, "usbxfer"); 404 cv_init(&xfer->hccv, "usbhcxfer"); 405 DPRINTFN(5,("usbd_alloc_xfer() = %p\n", xfer)); 406 return (xfer); 407 } 408 409 usbd_status 410 usbd_free_xfer(usbd_xfer_handle xfer) 411 { 412 DPRINTFN(5,("usbd_free_xfer: %p\n", xfer)); 413 if (xfer->rqflags & (URQ_DEV_DMABUF | URQ_AUTO_DMABUF)) 414 usbd_free_buffer(xfer); 415 #if defined(DIAGNOSTIC) 416 if (callout_pending(&xfer->timeout_handle)) { 417 callout_stop(&xfer->timeout_handle); 418 printf("usbd_free_xfer: timeout_handle pending\n"); 419 } 420 #endif 421 cv_destroy(&xfer->cv); 422 cv_destroy(&xfer->hccv); 423 xfer->device->bus->methods->freex(xfer->device->bus, xfer); 424 return (USBD_NORMAL_COMPLETION); 425 } 426 427 void 428 usbd_setup_xfer(usbd_xfer_handle xfer, usbd_pipe_handle pipe, 429 usbd_private_handle priv, void *buffer, u_int32_t length, 430 u_int16_t flags, u_int32_t timeout, 431 usbd_callback callback) 432 { 433 xfer->pipe = pipe; 434 xfer->priv = priv; 435 xfer->buffer = buffer; 436 xfer->length = length; 437 xfer->actlen = 0; 438 xfer->flags = flags; 439 xfer->timeout = timeout; 440 xfer->status = USBD_NOT_STARTED; 441 xfer->callback = callback; 442 xfer->rqflags &= ~URQ_REQUEST; 443 xfer->nframes = 0; 444 } 445 446 void 447 usbd_setup_default_xfer(usbd_xfer_handle xfer, usbd_device_handle dev, 448 usbd_private_handle priv, u_int32_t timeout, 449 usb_device_request_t *req, void *buffer, 450 u_int32_t length, u_int16_t flags, 451 usbd_callback callback) 452 { 453 xfer->pipe = dev->default_pipe; 454 xfer->priv = priv; 455 xfer->buffer = buffer; 456 xfer->length = length; 457 xfer->actlen = 0; 458 xfer->flags = flags; 459 xfer->timeout = timeout; 460 xfer->status = USBD_NOT_STARTED; 461 xfer->callback = callback; 462 xfer->request = *req; 463 xfer->rqflags |= URQ_REQUEST; 464 xfer->nframes = 0; 465 } 466 467 void 468 usbd_setup_isoc_xfer(usbd_xfer_handle xfer, usbd_pipe_handle pipe, 469 usbd_private_handle priv, u_int16_t *frlengths, 470 u_int32_t nframes, u_int16_t flags, usbd_callback callback) 471 { 472 xfer->pipe = pipe; 473 xfer->priv = priv; 474 xfer->buffer = 0; 475 xfer->length = 0; 476 xfer->actlen = 0; 477 xfer->flags = flags; 478 xfer->timeout = USBD_NO_TIMEOUT; 479 xfer->status = USBD_NOT_STARTED; 480 xfer->callback = callback; 481 xfer->rqflags &= ~URQ_REQUEST; 482 xfer->frlengths = frlengths; 483 xfer->nframes = nframes; 484 } 485 486 void 487 usbd_get_xfer_status(usbd_xfer_handle xfer, usbd_private_handle *priv, 488 void **buffer, u_int32_t *count, usbd_status *status) 489 { 490 if (priv != NULL) 491 *priv = xfer->priv; 492 if (buffer != NULL) 493 *buffer = xfer->buffer; 494 if (count != NULL) 495 *count = xfer->actlen; 496 if (status != NULL) 497 *status = xfer->status; 498 } 499 500 usb_config_descriptor_t * 501 usbd_get_config_descriptor(usbd_device_handle dev) 502 { 503 #ifdef DIAGNOSTIC 504 if (dev == NULL) { 505 printf("usbd_get_config_descriptor: dev == NULL\n"); 506 return (NULL); 507 } 508 #endif 509 return (dev->cdesc); 510 } 511 512 usb_interface_descriptor_t * 513 usbd_get_interface_descriptor(usbd_interface_handle iface) 514 { 515 #ifdef DIAGNOSTIC 516 if (iface == NULL) { 517 printf("usbd_get_interface_descriptor: dev == NULL\n"); 518 return (NULL); 519 } 520 #endif 521 return (iface->idesc); 522 } 523 524 usb_device_descriptor_t * 525 usbd_get_device_descriptor(usbd_device_handle dev) 526 { 527 return (&dev->ddesc); 528 } 529 530 usb_endpoint_descriptor_t * 531 usbd_interface2endpoint_descriptor(usbd_interface_handle iface, u_int8_t index) 532 { 533 if (index >= iface->idesc->bNumEndpoints) 534 return (NULL); 535 return (iface->endpoints[index].edesc); 536 } 537 538 /* Some drivers may wish to abort requests on the default pipe, * 539 * but there is no mechanism for getting a handle on it. */ 540 usbd_status 541 usbd_abort_default_pipe(struct usbd_device *device) 542 { 543 544 return usbd_abort_pipe(device->default_pipe); 545 } 546 547 usbd_status 548 usbd_abort_pipe(usbd_pipe_handle pipe) 549 { 550 usbd_status err; 551 552 #ifdef DIAGNOSTIC 553 if (pipe == NULL) { 554 printf("usbd_abort_pipe: pipe==NULL\n"); 555 return (USBD_NORMAL_COMPLETION); 556 } 557 #endif 558 usbd_lock_pipe(pipe); 559 err = usbd_ar_pipe(pipe); 560 usbd_unlock_pipe(pipe); 561 return (err); 562 } 563 564 usbd_status 565 usbd_clear_endpoint_stall(usbd_pipe_handle pipe) 566 { 567 usbd_device_handle dev = pipe->device; 568 usb_device_request_t req; 569 usbd_status err; 570 571 DPRINTFN(8, ("usbd_clear_endpoint_stall\n")); 572 573 /* 574 * Clearing en endpoint stall resets the endpoint toggle, so 575 * do the same to the HC toggle. 576 */ 577 pipe->methods->cleartoggle(pipe); 578 579 req.bmRequestType = UT_WRITE_ENDPOINT; 580 req.bRequest = UR_CLEAR_FEATURE; 581 USETW(req.wValue, UF_ENDPOINT_HALT); 582 USETW(req.wIndex, pipe->endpoint->edesc->bEndpointAddress); 583 USETW(req.wLength, 0); 584 err = usbd_do_request(dev, &req, 0); 585 #if 0 586 XXX should we do this? 587 if (!err) { 588 pipe->state = USBD_PIPE_ACTIVE; 589 /* XXX activate pipe */ 590 } 591 #endif 592 return (err); 593 } 594 595 void 596 usbd_clear_endpoint_stall_task(void *arg) 597 { 598 usbd_pipe_handle pipe = arg; 599 usbd_device_handle dev = pipe->device; 600 usb_device_request_t req; 601 602 pipe->methods->cleartoggle(pipe); 603 604 req.bmRequestType = UT_WRITE_ENDPOINT; 605 req.bRequest = UR_CLEAR_FEATURE; 606 USETW(req.wValue, UF_ENDPOINT_HALT); 607 USETW(req.wIndex, pipe->endpoint->edesc->bEndpointAddress); 608 USETW(req.wLength, 0); 609 (void)usbd_do_request(dev, &req, 0); 610 } 611 612 void 613 usbd_clear_endpoint_stall_async(usbd_pipe_handle pipe) 614 { 615 616 usb_add_task(pipe->device, &pipe->async_task, USB_TASKQ_DRIVER); 617 } 618 619 void 620 usbd_clear_endpoint_toggle(usbd_pipe_handle pipe) 621 { 622 pipe->methods->cleartoggle(pipe); 623 } 624 625 usbd_status 626 usbd_endpoint_count(usbd_interface_handle iface, u_int8_t *count) 627 { 628 #ifdef DIAGNOSTIC 629 if (iface == NULL || iface->idesc == NULL) { 630 printf("usbd_endpoint_count: NULL pointer\n"); 631 return (USBD_INVAL); 632 } 633 #endif 634 *count = iface->idesc->bNumEndpoints; 635 return (USBD_NORMAL_COMPLETION); 636 } 637 638 usbd_status 639 usbd_interface_count(usbd_device_handle dev, u_int8_t *count) 640 { 641 if (dev->cdesc == NULL) 642 return (USBD_NOT_CONFIGURED); 643 *count = dev->cdesc->bNumInterface; 644 return (USBD_NORMAL_COMPLETION); 645 } 646 647 void 648 usbd_interface2device_handle(usbd_interface_handle iface, 649 usbd_device_handle *dev) 650 { 651 *dev = iface->device; 652 } 653 654 usbd_status 655 usbd_device2interface_handle(usbd_device_handle dev, 656 u_int8_t ifaceno, usbd_interface_handle *iface) 657 { 658 if (dev->cdesc == NULL) 659 return (USBD_NOT_CONFIGURED); 660 if (ifaceno >= dev->cdesc->bNumInterface) 661 return (USBD_INVAL); 662 *iface = &dev->ifaces[ifaceno]; 663 return (USBD_NORMAL_COMPLETION); 664 } 665 666 usbd_device_handle 667 usbd_pipe2device_handle(usbd_pipe_handle pipe) 668 { 669 return (pipe->device); 670 } 671 672 /* XXXX use altno */ 673 usbd_status 674 usbd_set_interface(usbd_interface_handle iface, int altidx) 675 { 676 usb_device_request_t req; 677 usbd_status err; 678 void *endpoints; 679 680 if (LIST_FIRST(&iface->pipes) != 0) 681 return (USBD_IN_USE); 682 683 endpoints = iface->endpoints; 684 err = usbd_fill_iface_data(iface->device, iface->index, altidx); 685 if (err) 686 return (err); 687 688 /* new setting works, we can free old endpoints */ 689 if (endpoints != NULL) 690 free(endpoints, M_USB); 691 692 #ifdef DIAGNOSTIC 693 if (iface->idesc == NULL) { 694 printf("usbd_set_interface: NULL pointer\n"); 695 return (USBD_INVAL); 696 } 697 #endif 698 699 req.bmRequestType = UT_WRITE_INTERFACE; 700 req.bRequest = UR_SET_INTERFACE; 701 USETW(req.wValue, iface->idesc->bAlternateSetting); 702 USETW(req.wIndex, iface->idesc->bInterfaceNumber); 703 USETW(req.wLength, 0); 704 return (usbd_do_request(iface->device, &req, 0)); 705 } 706 707 int 708 usbd_get_no_alts(usb_config_descriptor_t *cdesc, int ifaceno) 709 { 710 char *p = (char *)cdesc; 711 char *end = p + UGETW(cdesc->wTotalLength); 712 usb_interface_descriptor_t *d; 713 int n; 714 715 for (n = 0; p < end; p += d->bLength) { 716 d = (usb_interface_descriptor_t *)p; 717 if (p + d->bLength <= end && 718 d->bDescriptorType == UDESC_INTERFACE && 719 d->bInterfaceNumber == ifaceno) 720 n++; 721 } 722 return (n); 723 } 724 725 int 726 usbd_get_interface_altindex(usbd_interface_handle iface) 727 { 728 return (iface->altindex); 729 } 730 731 usbd_status 732 usbd_get_interface(usbd_interface_handle iface, u_int8_t *aiface) 733 { 734 usb_device_request_t req; 735 736 req.bmRequestType = UT_READ_INTERFACE; 737 req.bRequest = UR_GET_INTERFACE; 738 USETW(req.wValue, 0); 739 USETW(req.wIndex, iface->idesc->bInterfaceNumber); 740 USETW(req.wLength, 1); 741 return (usbd_do_request(iface->device, &req, aiface)); 742 } 743 744 /*** Internal routines ***/ 745 746 /* Dequeue all pipe operations, called at splusb(). */ 747 Static usbd_status 748 usbd_ar_pipe(usbd_pipe_handle pipe) 749 { 750 usbd_xfer_handle xfer; 751 752 KASSERT(mutex_owned(pipe->device->bus->lock)); 753 754 DPRINTFN(2,("usbd_ar_pipe: pipe=%p\n", pipe)); 755 #ifdef USB_DEBUG 756 if (usbdebug > 5) 757 usbd_dump_queue(pipe); 758 #endif 759 pipe->repeat = 0; 760 pipe->aborting = 1; 761 while ((xfer = SIMPLEQ_FIRST(&pipe->queue)) != NULL) { 762 DPRINTFN(2,("usbd_ar_pipe: pipe=%p xfer=%p (methods=%p)\n", 763 pipe, xfer, pipe->methods)); 764 /* Make the HC abort it (and invoke the callback). */ 765 pipe->methods->abort(xfer); 766 /* XXX only for non-0 usbd_clear_endpoint_stall(pipe); */ 767 } 768 pipe->aborting = 0; 769 return (USBD_NORMAL_COMPLETION); 770 } 771 772 /* Called with USB lock held. */ 773 void 774 usb_transfer_complete(usbd_xfer_handle xfer) 775 { 776 usbd_pipe_handle pipe = xfer->pipe; 777 usb_dma_t *dmap = &xfer->dmabuf; 778 int sync = xfer->flags & USBD_SYNCHRONOUS; 779 int erred = xfer->status == USBD_CANCELLED || 780 xfer->status == USBD_TIMEOUT; 781 int polling = pipe->device->bus->use_polling; 782 int repeat; 783 784 DPRINTFN(5, ("usb_transfer_complete: pipe=%p xfer=%p status=%d " 785 "actlen=%d\n", pipe, xfer, xfer->status, xfer->actlen)); 786 787 KASSERT(polling || mutex_owned(pipe->device->bus->lock)); 788 789 #ifdef DIAGNOSTIC 790 if (xfer->busy_free != XFER_ONQU) { 791 printf("usb_transfer_complete: xfer=%p not queued 0x%08x\n", 792 xfer, xfer->busy_free); 793 } 794 #endif 795 796 #ifdef DIAGNOSTIC 797 if (pipe == NULL) { 798 printf("usb_transfer_complete: pipe==0, xfer=%p\n", xfer); 799 return; 800 } 801 #endif 802 repeat = pipe->repeat; 803 /* XXXX */ 804 if (polling) 805 pipe->running = 0; 806 807 if (!(xfer->flags & USBD_NO_COPY) && xfer->actlen != 0 && 808 usbd_xfer_isread(xfer)) { 809 #ifdef DIAGNOSTIC 810 if (xfer->actlen > xfer->length) { 811 printf("%s: actlen (%d) > len (%d)\n", __func__, 812 xfer->actlen, xfer->length); 813 xfer->actlen = xfer->length; 814 } 815 #endif 816 memcpy(xfer->buffer, KERNADDR(dmap, 0), xfer->actlen); 817 } 818 819 /* if we allocated the buffer in usbd_transfer() we free it here. */ 820 if (xfer->rqflags & URQ_AUTO_DMABUF) { 821 if (!repeat) { 822 struct usbd_bus *bus = pipe->device->bus; 823 bus->methods->freem(bus, dmap); 824 xfer->rqflags &= ~URQ_AUTO_DMABUF; 825 } 826 } 827 828 if (!repeat) { 829 /* Remove request from queue. */ 830 831 KASSERTMSG(!SIMPLEQ_EMPTY(&pipe->queue), 832 "pipe %p is empty, but xfer %p wants to complete", pipe, 833 xfer); 834 #ifdef DIAGNOSTIC 835 if (xfer != SIMPLEQ_FIRST(&pipe->queue)) 836 printf("%s: bad dequeue %p != %p\n", __func__, 837 xfer, SIMPLEQ_FIRST(&pipe->queue)); 838 xfer->busy_free = XFER_BUSY; 839 #endif 840 SIMPLEQ_REMOVE_HEAD(&pipe->queue, next); 841 } 842 DPRINTFN(5,("usb_transfer_complete: repeat=%d new head=%p\n", 843 repeat, SIMPLEQ_FIRST(&pipe->queue))); 844 845 /* Count completed transfers. */ 846 ++pipe->device->bus->stats.uds_requests 847 [pipe->endpoint->edesc->bmAttributes & UE_XFERTYPE]; 848 849 xfer->done = 1; 850 if (!xfer->status && xfer->actlen < xfer->length && 851 !(xfer->flags & USBD_SHORT_XFER_OK)) { 852 DPRINTFN(-1,("usb_transfer_complete: short transfer %d<%d\n", 853 xfer->actlen, xfer->length)); 854 xfer->status = USBD_SHORT_XFER; 855 } 856 857 if (repeat) { 858 if (xfer->callback) { 859 if (!polling) 860 mutex_exit(pipe->device->bus->lock); 861 862 if (!(pipe->flags & USBD_MPSAFE)) 863 KERNEL_LOCK(1, curlwp); 864 xfer->callback(xfer, xfer->priv, xfer->status); 865 if (!(pipe->flags & USBD_MPSAFE)) 866 KERNEL_UNLOCK_ONE(curlwp); 867 868 if (!polling) 869 mutex_enter(pipe->device->bus->lock); 870 } 871 pipe->methods->done(xfer); 872 } else { 873 pipe->methods->done(xfer); 874 if (xfer->callback) { 875 if (!polling) 876 mutex_exit(pipe->device->bus->lock); 877 878 if (!(pipe->flags & USBD_MPSAFE)) 879 KERNEL_LOCK(1, curlwp); 880 xfer->callback(xfer, xfer->priv, xfer->status); 881 if (!(pipe->flags & USBD_MPSAFE)) 882 KERNEL_UNLOCK_ONE(curlwp); 883 884 if (!polling) 885 mutex_enter(pipe->device->bus->lock); 886 } 887 } 888 889 if (sync && !polling) { 890 cv_broadcast(&xfer->cv); 891 } 892 893 if (!repeat) { 894 /* XXX should we stop the queue on all errors? */ 895 if (erred && pipe->iface != NULL) /* not control pipe */ 896 pipe->running = 0; 897 else 898 usbd_start_next(pipe); 899 } 900 } 901 902 /* Called with USB lock held. */ 903 usbd_status 904 usb_insert_transfer(usbd_xfer_handle xfer) 905 { 906 usbd_pipe_handle pipe = xfer->pipe; 907 usbd_status err; 908 909 DPRINTFN(5,("usb_insert_transfer: pipe=%p running=%d timeout=%d\n", 910 pipe, pipe->running, xfer->timeout)); 911 912 KASSERT(mutex_owned(pipe->device->bus->lock)); 913 914 #ifdef DIAGNOSTIC 915 if (xfer->busy_free != XFER_BUSY) { 916 printf("usb_insert_transfer: xfer=%p not busy 0x%08x\n", 917 xfer, xfer->busy_free); 918 return (USBD_INVAL); 919 } 920 xfer->busy_free = XFER_ONQU; 921 #endif 922 SIMPLEQ_INSERT_TAIL(&pipe->queue, xfer, next); 923 if (pipe->running) 924 err = USBD_IN_PROGRESS; 925 else { 926 pipe->running = 1; 927 err = USBD_NORMAL_COMPLETION; 928 } 929 return (err); 930 } 931 932 /* Called with USB lock held. */ 933 void 934 usbd_start_next(usbd_pipe_handle pipe) 935 { 936 usbd_xfer_handle xfer; 937 usbd_status err; 938 939 #ifdef DIAGNOSTIC 940 if (pipe == NULL) { 941 printf("usbd_start_next: pipe == NULL\n"); 942 return; 943 } 944 if (pipe->methods == NULL || pipe->methods->start == NULL) { 945 printf("usbd_start_next: pipe=%p no start method\n", pipe); 946 return; 947 } 948 #endif 949 950 KASSERT(mutex_owned(pipe->device->bus->lock)); 951 952 /* Get next request in queue. */ 953 xfer = SIMPLEQ_FIRST(&pipe->queue); 954 DPRINTFN(5, ("usbd_start_next: pipe=%p, xfer=%p\n", pipe, xfer)); 955 if (xfer == NULL) { 956 pipe->running = 0; 957 } else { 958 mutex_exit(pipe->device->bus->lock); 959 err = pipe->methods->start(xfer); 960 mutex_enter(pipe->device->bus->lock); 961 962 if (err != USBD_IN_PROGRESS) { 963 printf("usbd_start_next: error=%d\n", err); 964 pipe->running = 0; 965 /* XXX do what? */ 966 } 967 } 968 969 KASSERT(mutex_owned(pipe->device->bus->lock)); 970 } 971 972 usbd_status 973 usbd_do_request(usbd_device_handle dev, usb_device_request_t *req, void *data) 974 { 975 return (usbd_do_request_flags(dev, req, data, 0, 0, 976 USBD_DEFAULT_TIMEOUT)); 977 } 978 979 usbd_status 980 usbd_do_request_flags(usbd_device_handle dev, usb_device_request_t *req, 981 void *data, u_int16_t flags, int *actlen, u_int32_t timo) 982 { 983 return (usbd_do_request_flags_pipe(dev, dev->default_pipe, req, 984 data, flags, actlen, timo)); 985 } 986 987 usbd_status 988 usbd_do_request_flags_pipe(usbd_device_handle dev, usbd_pipe_handle pipe, 989 usb_device_request_t *req, void *data, u_int16_t flags, int *actlen, 990 u_int32_t timeout) 991 { 992 usbd_xfer_handle xfer; 993 usbd_status err; 994 995 #ifdef DIAGNOSTIC 996 if (cpu_intr_p() || cpu_softintr_p()) { 997 printf("usbd_do_request: not in process context\n"); 998 return (USBD_INVAL); 999 } 1000 #endif 1001 1002 xfer = usbd_alloc_xfer(dev); 1003 if (xfer == NULL) 1004 return (USBD_NOMEM); 1005 usbd_setup_default_xfer(xfer, dev, 0, timeout, req, 1006 data, UGETW(req->wLength), flags, 0); 1007 xfer->pipe = pipe; 1008 err = usbd_sync_transfer(xfer); 1009 #if defined(USB_DEBUG) || defined(DIAGNOSTIC) 1010 if (xfer->actlen > xfer->length) { 1011 DPRINTF(("%s: overrun addr=%d type=0x%02x req=0x" 1012 "%02x val=%d index=%d rlen=%d length=%d actlen=%d\n", 1013 __func__, dev->address, xfer->request.bmRequestType, 1014 xfer->request.bRequest, UGETW(xfer->request.wValue), 1015 UGETW(xfer->request.wIndex), 1016 UGETW(xfer->request.wLength), 1017 xfer->length, xfer->actlen)); 1018 } 1019 #endif 1020 if (actlen != NULL) 1021 *actlen = xfer->actlen; 1022 if (err == USBD_STALLED) { 1023 /* 1024 * The control endpoint has stalled. Control endpoints 1025 * should not halt, but some may do so anyway so clear 1026 * any halt condition. 1027 */ 1028 usb_device_request_t treq; 1029 usb_status_t status; 1030 u_int16_t s; 1031 usbd_status nerr; 1032 1033 treq.bmRequestType = UT_READ_ENDPOINT; 1034 treq.bRequest = UR_GET_STATUS; 1035 USETW(treq.wValue, 0); 1036 USETW(treq.wIndex, 0); 1037 USETW(treq.wLength, sizeof(usb_status_t)); 1038 usbd_setup_default_xfer(xfer, dev, 0, USBD_DEFAULT_TIMEOUT, 1039 &treq, &status,sizeof(usb_status_t), 1040 0, 0); 1041 nerr = usbd_sync_transfer(xfer); 1042 if (nerr) 1043 goto bad; 1044 s = UGETW(status.wStatus); 1045 DPRINTF(("usbd_do_request: status = 0x%04x\n", s)); 1046 if (!(s & UES_HALT)) 1047 goto bad; 1048 treq.bmRequestType = UT_WRITE_ENDPOINT; 1049 treq.bRequest = UR_CLEAR_FEATURE; 1050 USETW(treq.wValue, UF_ENDPOINT_HALT); 1051 USETW(treq.wIndex, 0); 1052 USETW(treq.wLength, 0); 1053 usbd_setup_default_xfer(xfer, dev, 0, USBD_DEFAULT_TIMEOUT, 1054 &treq, &status, 0, 0, 0); 1055 nerr = usbd_sync_transfer(xfer); 1056 if (nerr) 1057 goto bad; 1058 } 1059 1060 bad: 1061 if (err) { 1062 DPRINTF(("%s: returning err=%s\n", __func__, usbd_errstr(err))); 1063 } 1064 usbd_free_xfer(xfer); 1065 return (err); 1066 } 1067 1068 const struct usbd_quirks * 1069 usbd_get_quirks(usbd_device_handle dev) 1070 { 1071 #ifdef DIAGNOSTIC 1072 if (dev == NULL) { 1073 printf("usbd_get_quirks: dev == NULL\n"); 1074 return 0; 1075 } 1076 #endif 1077 return (dev->quirks); 1078 } 1079 1080 /* XXX do periodic free() of free list */ 1081 1082 /* 1083 * Called from keyboard driver when in polling mode. 1084 */ 1085 void 1086 usbd_dopoll(usbd_interface_handle iface) 1087 { 1088 iface->device->bus->methods->do_poll(iface->device->bus); 1089 } 1090 1091 /* 1092 * XXX use this more??? use_polling it touched manually all over 1093 */ 1094 void 1095 usbd_set_polling(usbd_device_handle dev, int on) 1096 { 1097 if (on) 1098 dev->bus->use_polling++; 1099 else 1100 dev->bus->use_polling--; 1101 1102 /* Kick the host controller when switching modes */ 1103 mutex_enter(dev->bus->lock); 1104 (*dev->bus->methods->soft_intr)(dev->bus); 1105 mutex_exit(dev->bus->lock); 1106 } 1107 1108 1109 usb_endpoint_descriptor_t * 1110 usbd_get_endpoint_descriptor(usbd_interface_handle iface, u_int8_t address) 1111 { 1112 struct usbd_endpoint *ep; 1113 int i; 1114 1115 for (i = 0; i < iface->idesc->bNumEndpoints; i++) { 1116 ep = &iface->endpoints[i]; 1117 if (ep->edesc->bEndpointAddress == address) 1118 return (iface->endpoints[i].edesc); 1119 } 1120 return (NULL); 1121 } 1122 1123 /* 1124 * usbd_ratecheck() can limit the number of error messages that occurs. 1125 * When a device is unplugged it may take up to 0.25s for the hub driver 1126 * to notice it. If the driver continuosly tries to do I/O operations 1127 * this can generate a large number of messages. 1128 */ 1129 int 1130 usbd_ratecheck(struct timeval *last) 1131 { 1132 static struct timeval errinterval = { 0, 250000 }; /* 0.25 s*/ 1133 1134 return (ratecheck(last, &errinterval)); 1135 } 1136 1137 /* 1138 * Search for a vendor/product pair in an array. The item size is 1139 * given as an argument. 1140 */ 1141 const struct usb_devno * 1142 usb_match_device(const struct usb_devno *tbl, u_int nentries, u_int sz, 1143 u_int16_t vendor, u_int16_t product) 1144 { 1145 while (nentries-- > 0) { 1146 u_int16_t tproduct = tbl->ud_product; 1147 if (tbl->ud_vendor == vendor && 1148 (tproduct == product || tproduct == USB_PRODUCT_ANY)) 1149 return (tbl); 1150 tbl = (const struct usb_devno *)((const char *)tbl + sz); 1151 } 1152 return (NULL); 1153 } 1154 1155 1156 void 1157 usb_desc_iter_init(usbd_device_handle dev, usbd_desc_iter_t *iter) 1158 { 1159 const usb_config_descriptor_t *cd = usbd_get_config_descriptor(dev); 1160 1161 iter->cur = (const uByte *)cd; 1162 iter->end = (const uByte *)cd + UGETW(cd->wTotalLength); 1163 } 1164 1165 const usb_descriptor_t * 1166 usb_desc_iter_next(usbd_desc_iter_t *iter) 1167 { 1168 const usb_descriptor_t *desc; 1169 1170 if (iter->cur + sizeof(usb_descriptor_t) >= iter->end) { 1171 if (iter->cur != iter->end) 1172 printf("usb_desc_iter_next: bad descriptor\n"); 1173 return NULL; 1174 } 1175 desc = (const usb_descriptor_t *)iter->cur; 1176 if (desc->bLength == 0) { 1177 printf("usb_desc_iter_next: descriptor length = 0\n"); 1178 return NULL; 1179 } 1180 iter->cur += desc->bLength; 1181 if (iter->cur > iter->end) { 1182 printf("usb_desc_iter_next: descriptor length too large\n"); 1183 return NULL; 1184 } 1185 return desc; 1186 } 1187 1188 usbd_status 1189 usbd_get_string(usbd_device_handle dev, int si, char *buf) 1190 { 1191 return usbd_get_string0(dev, si, buf, 1); 1192 } 1193 1194 usbd_status 1195 usbd_get_string0(usbd_device_handle dev, int si, char *buf, int unicode) 1196 { 1197 int swap = dev->quirks->uq_flags & UQ_SWAP_UNICODE; 1198 usb_string_descriptor_t us; 1199 char *s; 1200 int i, n; 1201 u_int16_t c; 1202 usbd_status err; 1203 int size; 1204 1205 buf[0] = '\0'; 1206 if (si == 0) 1207 return (USBD_INVAL); 1208 if (dev->quirks->uq_flags & UQ_NO_STRINGS) 1209 return (USBD_STALLED); 1210 if (dev->langid == USBD_NOLANG) { 1211 /* Set up default language */ 1212 err = usbd_get_string_desc(dev, USB_LANGUAGE_TABLE, 0, &us, 1213 &size); 1214 if (err || size < 4) { 1215 DPRINTFN(-1,("usbd_get_string: getting lang failed, using 0\n")); 1216 dev->langid = 0; /* Well, just pick something then */ 1217 } else { 1218 /* Pick the first language as the default. */ 1219 dev->langid = UGETW(us.bString[0]); 1220 } 1221 } 1222 err = usbd_get_string_desc(dev, si, dev->langid, &us, &size); 1223 if (err) 1224 return (err); 1225 s = buf; 1226 n = size / 2 - 1; 1227 if (unicode) { 1228 for (i = 0; i < n; i++) { 1229 c = UGETW(us.bString[i]); 1230 if (swap) 1231 c = (c >> 8) | (c << 8); 1232 s += wput_utf8(s, 3, c); 1233 } 1234 *s++ = 0; 1235 } 1236 #ifdef COMPAT_30 1237 else { 1238 for (i = 0; i < n; i++) { 1239 c = UGETW(us.bString[i]); 1240 if (swap) 1241 c = (c >> 8) | (c << 8); 1242 *s++ = (c < 0x80) ? c : '?'; 1243 } 1244 *s++ = 0; 1245 } 1246 #endif 1247 return (USBD_NORMAL_COMPLETION); 1248 } 1249