1 /* $NetBSD: ukbd.c,v 1.162 2023/01/10 18:20:10 mrg Exp $ */ 2 3 /* 4 * Copyright (c) 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Lennart Augustsson (lennart@augustsson.net) at 9 * Carlstedt Research & Technology. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * HID spec: http://www.usb.org/developers/devclass_docs/HID1_11.pdf 35 */ 36 37 #include <sys/cdefs.h> 38 __KERNEL_RCSID(0, "$NetBSD: ukbd.c,v 1.162 2023/01/10 18:20:10 mrg Exp $"); 39 40 #ifdef _KERNEL_OPT 41 #include "opt_ddb.h" 42 #include "opt_ukbd.h" 43 #include "opt_ukbd_layout.h" 44 #include "opt_usb.h" 45 #include "opt_usbverbose.h" 46 #include "opt_wsdisplay_compat.h" 47 #endif /* _KERNEL_OPT */ 48 49 #include <sys/param.h> 50 #include <sys/systm.h> 51 #include <sys/callout.h> 52 #include <sys/kernel.h> 53 #include <sys/device.h> 54 #include <sys/ioctl.h> 55 #include <sys/file.h> 56 #include <sys/select.h> 57 #include <sys/proc.h> 58 #include <sys/vnode.h> 59 #include <sys/poll.h> 60 61 #include <dev/usb/usb.h> 62 #include <dev/usb/usbhid.h> 63 64 #include <dev/usb/usbdi.h> 65 #include <dev/usb/usbdi_util.h> 66 #include <dev/usb/usbdivar.h> 67 #include <dev/usb/usbdevs.h> 68 #include <dev/usb/usb_quirks.h> 69 #include <dev/usb/uhidev.h> 70 #include <dev/usb/ukbdvar.h> 71 #include <dev/hid/hid.h> 72 73 #include <dev/wscons/wsconsio.h> 74 #include <dev/wscons/wskbdvar.h> 75 #include <dev/wscons/wsksymdef.h> 76 #include <dev/wscons/wsksymvar.h> 77 78 #ifdef UKBD_DEBUG 79 #define DPRINTF(x) if (ukbddebug) printf x 80 #define DPRINTFN(n,x) if (ukbddebug>(n)) printf x 81 int ukbddebug = 0; 82 #else 83 #define DPRINTF(x) 84 #define DPRINTFN(n,x) 85 #endif 86 87 #define MAXKEYCODE 32 88 #define MAXKEYS 256 89 90 struct ukbd_data { 91 uint8_t keys[MAXKEYS/NBBY]; 92 }; 93 94 #define PRESS 0x000 95 #define RELEASE 0x100 96 #define CODEMASK 0x0ff 97 98 struct ukbd_keycodetrans { 99 uint16_t from; 100 uint16_t to; 101 }; 102 103 #define IS_PMF 0x8000 104 105 Static const struct ukbd_keycodetrans trtab_apple_fn[] = { 106 { 0x0c, 0x5d }, /* i -> KP 5 */ 107 { 0x0d, 0x59 }, /* j -> KP 1 */ 108 { 0x0e, 0x5a }, /* k -> KP 2 */ 109 { 0x0f, 0x5b }, /* l -> KP 3 */ 110 { 0x10, 0x62 }, /* m -> KP 0 */ 111 { 0x12, 0x5e }, /* o -> KP 6 */ 112 { 0x13, 0x55 }, /* o -> KP * */ 113 { 0x18, 0x5c }, /* u -> KP 4 */ 114 { 0x0c, 0x5d }, /* i -> KP 5 */ 115 { 0x2a, 0x4c }, /* Backspace -> Delete */ 116 { 0x28, 0x49 }, /* Return -> Insert */ 117 { 0x24, 0x5f }, /* 7 -> KP 7 */ 118 { 0x25, 0x60 }, /* 8 -> KP 8 */ 119 { 0x26, 0x61 }, /* 9 -> KP 9 */ 120 { 0x27, 0x54 }, /* 0 -> KP / */ 121 { 0x2d, 0x67 }, /* - -> KP = */ 122 { 0x33, 0x56 }, /* ; -> KP - */ 123 { 0x37, 0x63 }, /* . -> KP . */ 124 { 0x38, 0x57 }, /* / -> KP + */ 125 { 0x3a, IS_PMF | PMFE_DISPLAY_BRIGHTNESS_DOWN }, 126 { 0x3b, IS_PMF | PMFE_DISPLAY_BRIGHTNESS_UP }, 127 { 0x3c, IS_PMF | PMFE_AUDIO_VOLUME_TOGGLE }, 128 { 0x3d, IS_PMF | PMFE_AUDIO_VOLUME_DOWN }, 129 { 0x3e, IS_PMF | PMFE_AUDIO_VOLUME_UP }, 130 { 0x3f, 0xd6 }, /* num lock */ 131 { 0x40, 0xd7 }, 132 { 0x41, IS_PMF | PMFE_KEYBOARD_BRIGHTNESS_TOGGLE }, 133 { 0x42, IS_PMF | PMFE_KEYBOARD_BRIGHTNESS_DOWN }, 134 { 0x43, IS_PMF | PMFE_KEYBOARD_BRIGHTNESS_UP }, 135 { 0x44, 0xdb }, 136 { 0x45, 0xdc }, 137 { 0x4f, 0x4d }, /* Right -> End */ 138 { 0x50, 0x4a }, /* Left -> Home */ 139 { 0x51, 0x4e }, /* Down -> PageDown */ 140 { 0x52, 0x4b }, /* Up -> PageUp */ 141 { 0x00, 0x00 } 142 }; 143 144 Static const struct ukbd_keycodetrans trtab_apple_iso[] = { 145 { 0x35, 0x64 }, /* swap the key above tab with key right of shift */ 146 { 0x64, 0x35 }, 147 { 0x31, 0x32 }, /* key left of return is Europe1, not "\|" */ 148 { 0x00, 0x00 } 149 }; 150 151 #ifdef GDIUM_KEYBOARD_HACK 152 Static const struct ukbd_keycodetrans trtab_gdium_fn[] = { 153 #ifdef notyet 154 { 58, 0 }, /* F1 -> toggle camera */ 155 { 59, 0 }, /* F2 -> toggle wireless */ 156 #endif 157 { 60, IS_PMF | PMFE_AUDIO_VOLUME_TOGGLE }, 158 { 61, IS_PMF | PMFE_AUDIO_VOLUME_UP }, 159 { 62, IS_PMF | PMFE_AUDIO_VOLUME_DOWN }, 160 #ifdef notyet 161 { 63, 0 }, /* F6 -> toggle ext. video */ 162 { 64, 0 }, /* F7 -> toggle mouse */ 163 #endif 164 { 65, IS_PMF | PMFE_DISPLAY_BRIGHTNESS_UP }, 165 { 66, IS_PMF | PMFE_DISPLAY_BRIGHTNESS_DOWN }, 166 #ifdef notyet 167 { 67, 0 }, /* F10 -> suspend */ 168 { 68, 0 }, /* F11 -> user1 */ 169 { 69, 0 }, /* F12 -> user2 */ 170 { 70, 0 }, /* print screen -> sysrq */ 171 #endif 172 { 76, 71 }, /* delete -> scroll lock */ 173 { 81, 78 }, /* down -> page down */ 174 { 82, 75 }, /* up -> page up */ 175 { 0, 0 } 176 }; 177 #endif 178 179 Static const struct ukbd_keycodetrans trtab_generic[] = { 180 { 0x7f, IS_PMF | PMFE_AUDIO_VOLUME_TOGGLE }, 181 { 0x80, IS_PMF | PMFE_AUDIO_VOLUME_UP }, 182 { 0x81, IS_PMF | PMFE_AUDIO_VOLUME_DOWN }, 183 { 0x00, 0x00 } 184 }; 185 186 #if defined(WSDISPLAY_COMPAT_RAWKBD) 187 #define NN 0 /* no translation */ 188 /* 189 * Translate USB keycodes to US keyboard XT scancodes. 190 * Scancodes >= 0x80 represent EXTENDED keycodes. 191 * 192 * See http://www.microsoft.com/whdc/archive/scancode.mspx 193 * 194 * Note: a real pckbd(4) has more complexity in its 195 * protocol for some keys than this translation implements. 196 * For example, some keys generate Fake ShiftL events (e0 2a) 197 * before the actual key sequence. 198 */ 199 Static const uint8_t ukbd_trtab[256] = { 200 NN, NN, NN, NN, 0x1e, 0x30, 0x2e, 0x20, /* 00 - 07 */ 201 0x12, 0x21, 0x22, 0x23, 0x17, 0x24, 0x25, 0x26, /* 08 - 0f */ 202 0x32, 0x31, 0x18, 0x19, 0x10, 0x13, 0x1f, 0x14, /* 10 - 17 */ 203 0x16, 0x2f, 0x11, 0x2d, 0x15, 0x2c, 0x02, 0x03, /* 18 - 1f */ 204 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, /* 20 - 27 */ 205 0x1c, 0x01, 0x0e, 0x0f, 0x39, 0x0c, 0x0d, 0x1a, /* 28 - 2f */ 206 0x1b, 0x2b, 0x2b, 0x27, 0x28, 0x29, 0x33, 0x34, /* 30 - 37 */ 207 0x35, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x40, /* 38 - 3f */ 208 0x41, 0x42, 0x43, 0x44, 0x57, 0x58, 0xb7, 0x46, /* 40 - 47 */ 209 0x7f, 0xd2, 0xc7, 0xc9, 0xd3, 0xcf, 0xd1, 0xcd, /* 48 - 4f */ 210 0xcb, 0xd0, 0xc8, 0x45, 0xb5, 0x37, 0x4a, 0x4e, /* 50 - 57 */ 211 0x9c, 0x4f, 0x50, 0x51, 0x4b, 0x4c, 0x4d, 0x47, /* 58 - 5f */ 212 0x48, 0x49, 0x52, 0x53, 0x56, 0xdd, 0xdf, 0x59, /* 60 - 67 */ 213 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6a, NN, /* 68 - 6f */ 214 NN, NN, NN, NN, 0x84, 0x85, 0x87, 0x88, /* 70 - 77 */ 215 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, NN, /* 78 - 7f */ 216 NN, NN, NN, NN, NN, 0x7e, NN, 0x73, /* 80 - 87 */ 217 0x70, 0x7d, 0x79, 0x7b, 0x5c, NN, NN, NN, /* 88 - 8f */ 218 NN, NN, 0x78, 0x77, 0x76, NN, NN, NN, /* 90 - 97 */ 219 NN, NN, NN, NN, NN, NN, NN, NN, /* 98 - 9f */ 220 NN, NN, NN, NN, NN, NN, NN, NN, /* a0 - a7 */ 221 NN, NN, NN, NN, NN, NN, NN, NN, /* a8 - af */ 222 NN, NN, NN, NN, NN, NN, NN, NN, /* b0 - b7 */ 223 NN, NN, NN, NN, NN, NN, NN, NN, /* b8 - bf */ 224 NN, NN, NN, NN, NN, NN, NN, NN, /* c0 - c7 */ 225 NN, NN, NN, NN, NN, NN, NN, NN, /* c8 - cf */ 226 NN, NN, NN, NN, NN, NN, NN, NN, /* d0 - d7 */ 227 NN, NN, NN, NN, NN, NN, NN, NN, /* d8 - df */ 228 0x1d, 0x2a, 0x38, 0xdb, 0x9d, 0x36, 0xb8, 0xdc, /* e0 - e7 */ 229 NN, NN, NN, NN, NN, NN, NN, NN, /* e8 - ef */ 230 NN, NN, NN, NN, NN, NN, NN, NN, /* f0 - f7 */ 231 NN, NN, NN, NN, NN, NN, NN, NN, /* f8 - ff */ 232 }; 233 #endif /* defined(WSDISPLAY_COMPAT_RAWKBD) */ 234 235 #define KEY_ERROR 0x01 236 237 struct ukbd_softc { 238 device_t sc_dev; 239 struct uhidev *sc_hdev; 240 struct usbd_device *sc_udev; 241 struct usbd_interface *sc_iface; 242 int sc_report_id; 243 244 struct ukbd_data sc_ndata; 245 struct ukbd_data sc_odata; 246 struct hid_location sc_keyloc[MAXKEYS]; 247 uint8_t sc_keyuse[MAXKEYS]; 248 u_int sc_nkeyloc; 249 250 struct hid_location sc_keycodeloc; 251 u_int sc_nkeycode; 252 253 u_int sc_flags; /* flags */ 254 #define FLAG_ENABLED 0x0001 255 #define FLAG_POLLING 0x0002 256 #define FLAG_DEBOUNCE 0x0004 /* for quirk handling */ 257 #define FLAG_APPLE_FIX_ISO 0x0008 258 #define FLAG_APPLE_FN 0x0010 259 #define FLAG_GDIUM_FN 0x0020 260 #define FLAG_FN_PRESSED 0x0100 /* FN key is held down */ 261 #define FLAG_FN_ALT 0x0200 /* Last Alt key was FN-Alt = AltGr */ 262 #define FLAG_NO_CONSOLE 0x0400 /* Don't attach as console */ 263 264 int sc_console_keyboard; /* we are the console keyboard */ 265 266 struct callout sc_delay; /* for quirk handling */ 267 #define MAXPENDING 32 268 struct ukbd_data sc_data[MAXPENDING]; 269 size_t sc_data_w, sc_data_r; 270 271 struct hid_location sc_apple_fn; 272 struct hid_location sc_numloc; 273 struct hid_location sc_capsloc; 274 struct hid_location sc_scroloc; 275 struct hid_location sc_compose; 276 int sc_leds; 277 struct usb_task sc_ledtask; 278 struct callout sc_ledreset; 279 int sc_leds_set; 280 device_t sc_wskbddev; 281 282 #if defined(WSDISPLAY_COMPAT_RAWKBD) 283 int sc_rawkbd; 284 #if defined(UKBD_REPEAT) 285 struct callout sc_rawrepeat_ch; 286 #define REP_DELAY1 400 287 #define REP_DELAYN 100 288 int sc_nrep; 289 char sc_rep[MAXKEYS]; 290 #endif /* defined(UKBD_REPEAT) */ 291 #endif /* defined(WSDISPLAY_COMPAT_RAWKBD) */ 292 293 int sc_spl; 294 int sc_npollchar; 295 uint16_t sc_pollchars[MAXKEYS]; 296 297 bool sc_dying; 298 bool sc_attached; 299 }; 300 301 #ifdef UKBD_DEBUG 302 #define UKBDTRACESIZE 64 303 struct ukbdtraceinfo { 304 int unit; 305 struct timeval tv; 306 struct ukbd_data ud; 307 }; 308 struct ukbdtraceinfo ukbdtracedata[UKBDTRACESIZE]; 309 int ukbdtraceindex = 0; 310 int ukbdtrace = 0; 311 void ukbdtracedump(void); 312 void 313 ukbdtracedump(void) 314 { 315 size_t i, j; 316 for (i = 0; i < UKBDTRACESIZE; i++) { 317 struct ukbdtraceinfo *p = 318 &ukbdtracedata[(i+ukbdtraceindex)%UKBDTRACESIZE]; 319 printf("%"PRIu64".%06"PRIu64":", p->tv.tv_sec, 320 (uint64_t)p->tv.tv_usec); 321 for (j = 0; j < MAXKEYS; j++) { 322 if (isset(p->ud.keys, j)) 323 printf(" %zu", j); 324 } 325 printf(".\n"); 326 } 327 } 328 #endif 329 330 #define UKBDUNIT(dev) (minor(dev)) 331 #define UKBD_CHUNK 128 /* chunk size for read */ 332 #define UKBD_BSIZE 1020 /* buffer size */ 333 334 Static int ukbd_is_console; 335 336 Static void ukbd_cngetc(void *, u_int *, int *); 337 Static void ukbd_cnpollc(void *, int); 338 339 const struct wskbd_consops ukbd_consops = { 340 .getc = ukbd_cngetc, 341 .pollc = ukbd_cnpollc, 342 .bell = NULL, 343 }; 344 345 Static const char *ukbd_parse_desc(struct ukbd_softc *); 346 347 Static void ukbd_intr(void *, void *, u_int); 348 Static void ukbd_decode(struct ukbd_softc *, struct ukbd_data *); 349 Static void ukbd_delayed_decode(void *); 350 351 Static int ukbd_enable(void *, int); 352 Static void ukbd_set_leds(void *, int); 353 Static void ukbd_set_leds_task(void *); 354 Static void ukbd_delayed_leds_off(void *); 355 356 Static int ukbd_ioctl(void *, u_long, void *, int, struct lwp *); 357 #if defined(WSDISPLAY_COMPAT_RAWKBD) && defined(UKBD_REPEAT) 358 Static void ukbd_rawrepeat(void *v); 359 #endif 360 361 const struct wskbd_accessops ukbd_accessops = { 362 ukbd_enable, 363 ukbd_set_leds, 364 ukbd_ioctl, 365 }; 366 367 extern const struct wscons_keydesc hidkbd_keydesctab[]; 368 369 const struct wskbd_mapdata ukbd_keymapdata = { 370 hidkbd_keydesctab, 371 #if defined(UKBD_LAYOUT) 372 UKBD_LAYOUT, 373 #elif defined(PCKBD_LAYOUT) 374 PCKBD_LAYOUT, 375 #else 376 KB_US, 377 #endif 378 }; 379 380 static const struct ukbd_type { 381 struct usb_devno dev; 382 int flags; 383 } ukbd_devs[] = { 384 #define UKBD_DEV(v, p, f) \ 385 { { USB_VENDOR_##v, USB_PRODUCT_##v##_##p }, (f) } 386 #ifdef GDIUM_KEYBOARD_HACK 387 UKBD_DEV(CYPRESS, LPRDK, FLAG_GDIUM_FN), 388 #endif 389 UKBD_DEV(YUBICO, YUBIKEY4MODE1, FLAG_NO_CONSOLE), 390 UKBD_DEV(YUBICO, YUBIKEY4MODE2, FLAG_NO_CONSOLE), 391 UKBD_DEV(YUBICO, YUBIKEY4MODE6, FLAG_NO_CONSOLE) 392 }; 393 #define ukbd_lookup(v, p) \ 394 ((const struct ukbd_type *)usb_lookup(ukbd_devs, v, p)) 395 396 static int ukbd_match(device_t, cfdata_t, void *); 397 static void ukbd_attach(device_t, device_t, void *); 398 static int ukbd_detach(device_t, int); 399 static int ukbd_activate(device_t, enum devact); 400 static void ukbd_childdet(device_t, device_t); 401 402 403 404 CFATTACH_DECL2_NEW(ukbd, sizeof(struct ukbd_softc), ukbd_match, ukbd_attach, 405 ukbd_detach, ukbd_activate, NULL, ukbd_childdet); 406 407 int 408 ukbd_match(device_t parent, cfdata_t match, void *aux) 409 { 410 struct uhidev_attach_arg *uha = aux; 411 int size; 412 void *desc; 413 414 uhidev_get_report_desc(uha->parent, &desc, &size); 415 if (!hid_is_collection(desc, size, uha->reportid, 416 HID_USAGE2(HUP_GENERIC_DESKTOP, HUG_KEYBOARD))) 417 return UMATCH_NONE; 418 419 return UMATCH_IFACECLASS; 420 } 421 422 void 423 ukbd_attach(device_t parent, device_t self, void *aux) 424 { 425 struct ukbd_softc *sc = device_private(self); 426 struct uhidev_attach_arg *uha = aux; 427 uint32_t qflags; 428 const char *parseerr; 429 struct wskbddev_attach_args a; 430 const struct ukbd_type *ukt; 431 432 sc->sc_dev = self; 433 sc->sc_hdev = uha->parent; 434 sc->sc_udev = uha->uiaa->uiaa_device; 435 sc->sc_iface = uha->uiaa->uiaa_iface; 436 sc->sc_report_id = uha->reportid; 437 sc->sc_flags = 0; 438 439 aprint_naive("\n"); 440 441 if (!pmf_device_register(self, NULL, NULL)) { 442 aprint_normal("\n"); 443 aprint_error_dev(self, "couldn't establish power handler\n"); 444 } 445 446 parseerr = ukbd_parse_desc(sc); 447 if (parseerr != NULL) { 448 aprint_normal("\n"); 449 aprint_error_dev(self, "attach failed, %s\n", parseerr); 450 return; 451 } 452 453 /* Quirks */ 454 qflags = usbd_get_quirks(sc->sc_udev)->uq_flags; 455 if (qflags & UQ_SPUR_BUT_UP) 456 sc->sc_flags |= FLAG_DEBOUNCE; 457 if (qflags & UQ_APPLE_ISO) 458 sc->sc_flags |= FLAG_APPLE_FIX_ISO; 459 460 /* Other Quirks */ 461 ukt = ukbd_lookup(uha->uiaa->uiaa_vendor, uha->uiaa->uiaa_product); 462 if (ukt) 463 sc->sc_flags |= ukt->flags; 464 465 #ifdef USBVERBOSE 466 aprint_normal(": %d Variable keys, %d Array codes", sc->sc_nkeyloc, 467 sc->sc_nkeycode); 468 if (sc->sc_flags & FLAG_APPLE_FN) 469 aprint_normal(", apple fn key"); 470 if (sc->sc_flags & FLAG_APPLE_FIX_ISO) 471 aprint_normal(", fix apple iso"); 472 if (sc->sc_flags & FLAG_GDIUM_FN) 473 aprint_normal(", Gdium fn key"); 474 #endif 475 aprint_normal("\n"); 476 477 if ((sc->sc_flags & FLAG_NO_CONSOLE) == 0) { 478 /* 479 * Remember if we're the console keyboard. 480 * 481 * XXX This always picks the first keyboard on the 482 * first USB bus, but what else can we really do? 483 */ 484 if ((sc->sc_console_keyboard = ukbd_is_console) != 0) { 485 /* Don't let any other keyboard have it. */ 486 ukbd_is_console = 0; 487 } 488 } 489 490 if (sc->sc_console_keyboard) { 491 DPRINTF(("%s: console keyboard sc=%p\n", __func__, sc)); 492 wskbd_cnattach(&ukbd_consops, sc, &ukbd_keymapdata); 493 ukbd_enable(sc, 1); 494 } 495 496 a.console = sc->sc_console_keyboard; 497 498 a.keymap = &ukbd_keymapdata; 499 500 a.accessops = &ukbd_accessops; 501 a.accesscookie = sc; 502 503 #ifdef UKBD_REPEAT 504 callout_init(&sc->sc_rawrepeat_ch, 0); 505 #endif 506 507 callout_init(&sc->sc_delay, 0); 508 509 sc->sc_data_w = 0; 510 sc->sc_data_r = 0; 511 512 usb_init_task(&sc->sc_ledtask, ukbd_set_leds_task, sc, 0); 513 callout_init(&sc->sc_ledreset, 0); 514 515 /* Flash the leds; no real purpose, just shows we're alive. */ 516 ukbd_set_leds(sc, WSKBD_LED_SCROLL | WSKBD_LED_NUM | WSKBD_LED_CAPS 517 | WSKBD_LED_COMPOSE); 518 sc->sc_leds_set = 0; /* not explicitly set by wskbd yet */ 519 callout_reset(&sc->sc_ledreset, mstohz(400), ukbd_delayed_leds_off, 520 sc); 521 522 sc->sc_wskbddev = config_found(self, &a, wskbddevprint, CFARGS_NONE); 523 524 sc->sc_attached = true; 525 526 return; 527 } 528 529 int 530 ukbd_enable(void *v, int on) 531 { 532 struct ukbd_softc *sc = v; 533 534 if (on && sc->sc_dying) 535 return EIO; 536 537 /* Should only be called to change state */ 538 if ((sc->sc_flags & FLAG_ENABLED) != 0 && on != 0) { 539 #ifdef DIAGNOSTIC 540 aprint_error_dev(sc->sc_dev, "bad call on=%d\n", on); 541 #endif 542 return EBUSY; 543 } 544 545 DPRINTF(("%s: sc=%p on=%d\n", __func__, sc, on)); 546 if (on) { 547 sc->sc_flags |= FLAG_ENABLED; 548 return uhidev_open(sc->sc_hdev, &ukbd_intr, sc); 549 } else { 550 sc->sc_flags &= ~FLAG_ENABLED; 551 uhidev_close(sc->sc_hdev); 552 return 0; 553 } 554 } 555 556 557 static void 558 ukbd_childdet(device_t self, device_t child) 559 { 560 struct ukbd_softc *sc = device_private(self); 561 562 KASSERT(sc->sc_wskbddev == child); 563 sc->sc_wskbddev = NULL; 564 } 565 566 int 567 ukbd_activate(device_t self, enum devact act) 568 { 569 struct ukbd_softc *sc = device_private(self); 570 571 switch (act) { 572 case DVACT_DEACTIVATE: 573 sc->sc_dying = true; 574 return 0; 575 default: 576 return EOPNOTSUPP; 577 } 578 } 579 580 int 581 ukbd_detach(device_t self, int flags) 582 { 583 struct ukbd_softc *sc = device_private(self); 584 int rv = 0; 585 586 DPRINTF(("%s: sc=%p flags=%d\n", __func__, sc, flags)); 587 588 pmf_device_deregister(self); 589 590 if (!sc->sc_attached) 591 return rv; 592 593 if (sc->sc_console_keyboard) { 594 /* 595 * Disconnect our consops and set ukbd_is_console 596 * back to 1 so that the next USB keyboard attached 597 * to the system will get it. 598 * XXX Should notify some other keyboard that it can be 599 * XXX console, if there are any other keyboards. 600 */ 601 printf("%s: was console keyboard\n", 602 device_xname(sc->sc_dev)); 603 wskbd_cndetach(); 604 ukbd_is_console = 1; 605 } 606 /* No need to do reference counting of ukbd, wskbd has all the goo. */ 607 if (sc->sc_wskbddev != NULL) 608 rv = config_detach(sc->sc_wskbddev, flags); 609 610 callout_halt(&sc->sc_delay, NULL); 611 callout_halt(&sc->sc_ledreset, NULL); 612 usb_rem_task_wait(sc->sc_udev, &sc->sc_ledtask, 613 USB_TASKQ_DRIVER, NULL); 614 615 /* The console keyboard does not get a disable call, so check pipe. */ 616 if (sc->sc_flags & FLAG_ENABLED) 617 uhidev_close(sc->sc_hdev); 618 619 return rv; 620 } 621 622 static void 623 ukbd_translate_keycodes(struct ukbd_softc *sc, struct ukbd_data *ud, 624 const struct ukbd_keycodetrans *tab) 625 { 626 const struct ukbd_keycodetrans *tp; 627 struct ukbd_data oud; 628 int i; 629 630 oud = *ud; 631 632 for (i = 4; i < MAXKEYS; i++) { 633 if (isset(oud.keys, i)) 634 for (tp = tab; tp->from; tp++) 635 if (tp->from == i) { 636 if (tp->to & IS_PMF) { 637 pmf_event_inject(sc->sc_dev, 638 tp->to & 0xff); 639 } else 640 setbit(ud->keys, tp->to); 641 clrbit(ud->keys, i); 642 break; 643 } 644 } 645 } 646 647 static uint16_t 648 ukbd_translate_modifier(struct ukbd_softc *sc, uint16_t key) 649 { 650 if ((sc->sc_flags & FLAG_APPLE_FN) && (key & CODEMASK) == 0x00e2) { 651 if ((key & ~CODEMASK) == PRESS) { 652 if (sc->sc_flags & FLAG_FN_PRESSED) { 653 /* pressed FN-Alt, translate to AltGr */ 654 key = 0x00e6 | PRESS; 655 sc->sc_flags |= FLAG_FN_ALT; 656 } 657 } else { 658 if (sc->sc_flags & FLAG_FN_ALT) { 659 /* released Alt, which was treated as FN-Alt */ 660 key = 0x00e6 | RELEASE; 661 sc->sc_flags &= ~FLAG_FN_ALT; 662 } 663 } 664 } 665 return key; 666 } 667 668 void 669 ukbd_intr(void *cookie, void *ibuf, u_int len) 670 { 671 struct ukbd_softc *sc = cookie; 672 struct ukbd_data *ud = &sc->sc_ndata; 673 int i; 674 675 #ifdef UKBD_DEBUG 676 if (ukbddebug > 5) { 677 printf("ukbd_intr: data"); 678 for (i = 0; i < len; i++) 679 printf(" 0x%02x", ((u_char *)ibuf)[i]); 680 printf("\n"); 681 } 682 #endif 683 684 memset(ud->keys, 0, sizeof(ud->keys)); 685 686 for (i = 0; i < sc->sc_nkeyloc; i++) 687 if (hid_get_data(ibuf, &sc->sc_keyloc[i])) 688 setbit(ud->keys, sc->sc_keyuse[i]); 689 690 const uint8_t * const scancode = (char *)ibuf + sc->sc_keycodeloc.pos / 8; 691 const uint16_t Keyboard_NoEvent = 0x0000; 692 for (i = 0; i < sc->sc_nkeycode; i++) { 693 if (scancode[i] != Keyboard_NoEvent) 694 setbit(ud->keys, scancode[i]); 695 } 696 697 if (sc->sc_flags & FLAG_APPLE_FN) { 698 if (hid_get_data(ibuf, &sc->sc_apple_fn)) { 699 sc->sc_flags |= FLAG_FN_PRESSED; 700 ukbd_translate_keycodes(sc, ud, trtab_apple_fn); 701 } 702 else 703 sc->sc_flags &= ~FLAG_FN_PRESSED; 704 } 705 706 #ifdef GDIUM_KEYBOARD_HACK 707 if (sc->sc_flags & FLAG_GDIUM_FN) { 708 if (sc->sc_flags & FLAG_FN_PRESSED) { 709 ukbd_translate_keycodes(sc, ud, trtab_gdium_fn); 710 } 711 } 712 #endif 713 714 ukbd_translate_keycodes(sc, ud, trtab_generic); 715 716 if ((sc->sc_flags & FLAG_DEBOUNCE) && !(sc->sc_flags & FLAG_POLLING)) { 717 /* 718 * Some keyboards have a peculiar quirk. They sometimes 719 * generate a key up followed by a key down for the same 720 * key after about 10 ms. 721 * We avoid this bug by holding off decoding for 20 ms. 722 * Note that this comes at a cost: we deliberately overwrite 723 * the data for any keyboard event that is followed by 724 * another one within this time window. 725 */ 726 if (sc->sc_data_w == sc->sc_data_r) { 727 sc->sc_data_w = (sc->sc_data_w + 1) % MAXPENDING; 728 } 729 sc->sc_data[sc->sc_data_w] = *ud; 730 callout_reset(&sc->sc_delay, hz / 50, ukbd_delayed_decode, sc); 731 #ifdef DDB 732 } else if (sc->sc_console_keyboard && !(sc->sc_flags & FLAG_POLLING)) { 733 /* 734 * For the console keyboard we can't deliver CTL-ALT-ESC 735 * from the interrupt routine. Doing so would start 736 * polling from inside the interrupt routine and that 737 * loses bigtime. 738 */ 739 sc->sc_data_w = (sc->sc_data_w + 1) % MAXPENDING; 740 sc->sc_data[sc->sc_data_w] = *ud; 741 callout_reset(&sc->sc_delay, 0, ukbd_delayed_decode, sc); 742 #endif 743 } else { 744 ukbd_decode(sc, ud); 745 } 746 } 747 748 Static void 749 ukbd_delayed_leds_off(void *addr) 750 { 751 struct ukbd_softc *sc = addr; 752 753 /* 754 * If the LEDs have already been set after attach, other than 755 * by our initial flashing of them, leave them be. 756 */ 757 if (sc->sc_leds_set) 758 return; 759 760 ukbd_set_leds(sc, 0); 761 } 762 763 void 764 ukbd_delayed_decode(void *addr) 765 { 766 struct ukbd_softc *sc = addr; 767 768 while (sc->sc_data_r != sc->sc_data_w) { 769 sc->sc_data_r = (sc->sc_data_r + 1) % MAXPENDING; 770 ukbd_decode(sc, &sc->sc_data[sc->sc_data_r]); 771 } 772 } 773 774 void 775 ukbd_decode(struct ukbd_softc *sc, struct ukbd_data *ud) 776 { 777 uint16_t ibuf[MAXKEYS]; /* chars events */ 778 int s; 779 int nkeys, i; 780 #ifdef WSDISPLAY_COMPAT_RAWKBD 781 int j; 782 #endif 783 int key; 784 #define ADDKEY(c) do { \ 785 KASSERT(nkeys < MAXKEYS); \ 786 ibuf[nkeys++] = (c); \ 787 } while (0) 788 789 #ifdef UKBD_DEBUG 790 /* 791 * Keep a trace of the last events. Using printf changes the 792 * timing, so this can be useful sometimes. 793 */ 794 if (ukbdtrace) { 795 struct ukbdtraceinfo *p = &ukbdtracedata[ukbdtraceindex]; 796 p->unit = device_unit(sc->sc_dev); 797 microtime(&p->tv); 798 p->ud = *ud; 799 if (++ukbdtraceindex >= UKBDTRACESIZE) 800 ukbdtraceindex = 0; 801 } 802 if (ukbddebug > 5) { 803 struct timeval tv; 804 microtime(&tv); 805 DPRINTF((" at %"PRIu64".%06"PRIu64":", tv.tv_sec, 806 (uint64_t)tv.tv_usec)); 807 for (size_t k = 0; k < MAXKEYS; k++) { 808 if (isset(ud->keys, k)) 809 DPRINTF((" %zu", k)); 810 } 811 DPRINTF((".\n")); 812 } 813 #endif 814 815 if (isset(ud->keys, KEY_ERROR)) { 816 DPRINTF(("%s: KEY_ERROR\n", __func__)); 817 return; /* ignore */ 818 } 819 820 if (sc->sc_flags & FLAG_APPLE_FIX_ISO) 821 ukbd_translate_keycodes(sc, ud, trtab_apple_iso); 822 823 nkeys = 0; 824 for (i = 0; i < MAXKEYS; i++) { 825 #ifdef GDIUM_KEYBOARD_HACK 826 if (sc->sc_flags & FLAG_GDIUM_FN && i == 0x82) { 827 if (isset(ud->keys, i)) 828 sc->sc_flags |= FLAG_FN_PRESSED; 829 else 830 sc->sc_flags &= ~FLAG_FN_PRESSED; 831 } 832 #endif 833 if (isset(ud->keys, i) != isset(sc->sc_odata.keys, i)) { 834 key = i | ((isset(ud->keys, i) ? PRESS : RELEASE)); 835 ADDKEY(ukbd_translate_modifier(sc, key)); 836 } 837 } 838 sc->sc_odata = *ud; 839 840 if (nkeys == 0) 841 return; 842 843 if (sc->sc_flags & FLAG_POLLING) { 844 DPRINTFN(1,("%s: pollchar = 0x%03x\n", __func__, ibuf[0])); 845 memcpy(sc->sc_pollchars, ibuf, nkeys * sizeof(uint16_t)); 846 sc->sc_npollchar = nkeys; 847 return; 848 } 849 #ifdef WSDISPLAY_COMPAT_RAWKBD 850 if (sc->sc_rawkbd) { 851 u_char cbuf[MAXKEYS * 2]; 852 int c; 853 #if defined(UKBD_REPEAT) 854 int npress = 0; 855 #endif 856 857 for (i = j = 0; i < nkeys; i++) { 858 key = ibuf[i]; 859 c = ukbd_trtab[key & CODEMASK]; 860 if (c == NN) 861 continue; 862 if (c == 0x7f) { 863 /* pause key */ 864 cbuf[j++] = 0xe1; 865 cbuf[j++] = 0x1d; 866 cbuf[j-1] |= (key & RELEASE) ? 0x80 : 0; 867 cbuf[j] = 0x45; 868 } else { 869 if (c & 0x80) 870 cbuf[j++] = 0xe0; 871 cbuf[j] = c & 0x7f; 872 } 873 if (key & RELEASE) 874 cbuf[j] |= 0x80; 875 #if defined(UKBD_REPEAT) 876 else { 877 /* remember pressed keys for autorepeat */ 878 if (c & 0x80) 879 sc->sc_rep[npress++] = 0xe0; 880 sc->sc_rep[npress++] = c & 0x7f; 881 } 882 #endif 883 DPRINTFN(1,("%s: raw = %s0x%02x\n", __func__, 884 c & 0x80 ? "0xe0 " : "", 885 cbuf[j])); 886 j++; 887 } 888 s = spltty(); 889 wskbd_rawinput(sc->sc_wskbddev, cbuf, j); 890 splx(s); 891 #ifdef UKBD_REPEAT 892 callout_stop(&sc->sc_rawrepeat_ch); 893 if (npress != 0) { 894 sc->sc_nrep = npress; 895 callout_reset(&sc->sc_rawrepeat_ch, 896 hz * REP_DELAY1 / 1000, ukbd_rawrepeat, sc); 897 } 898 #endif 899 return; 900 } 901 #endif 902 903 s = spltty(); 904 for (i = 0; i < nkeys; i++) { 905 key = ibuf[i]; 906 wskbd_input(sc->sc_wskbddev, 907 key&RELEASE ? WSCONS_EVENT_KEY_UP : WSCONS_EVENT_KEY_DOWN, 908 key&CODEMASK); 909 } 910 splx(s); 911 } 912 913 void 914 ukbd_set_leds(void *v, int leds) 915 { 916 struct ukbd_softc *sc = v; 917 struct usbd_device *udev = sc->sc_udev; 918 919 DPRINTF(("%s: sc=%p leds=%d, sc_leds=%d\n", __func__, 920 sc, leds, sc->sc_leds)); 921 922 if (sc->sc_dying) 923 return; 924 925 sc->sc_leds_set = 1; 926 927 if (sc->sc_leds == leds) 928 return; 929 930 sc->sc_leds = leds; 931 usb_add_task(udev, &sc->sc_ledtask, USB_TASKQ_DRIVER); 932 } 933 934 void 935 ukbd_set_leds_task(void *v) 936 { 937 struct ukbd_softc *sc = v; 938 int leds = sc->sc_leds; 939 uint8_t res = 0; 940 941 /* XXX not really right */ 942 if ((leds & WSKBD_LED_COMPOSE) && sc->sc_compose.size == 1) 943 res |= 1 << sc->sc_compose.pos; 944 if ((leds & WSKBD_LED_SCROLL) && sc->sc_scroloc.size == 1) 945 res |= 1 << sc->sc_scroloc.pos; 946 if ((leds & WSKBD_LED_NUM) && sc->sc_numloc.size == 1) 947 res |= 1 << sc->sc_numloc.pos; 948 if ((leds & WSKBD_LED_CAPS) && sc->sc_capsloc.size == 1) 949 res |= 1 << sc->sc_capsloc.pos; 950 951 uhidev_set_report(sc->sc_hdev, UHID_OUTPUT_REPORT, &res, 1); 952 } 953 954 #if defined(WSDISPLAY_COMPAT_RAWKBD) && defined(UKBD_REPEAT) 955 void 956 ukbd_rawrepeat(void *v) 957 { 958 struct ukbd_softc *sc = v; 959 int s; 960 961 s = spltty(); 962 wskbd_rawinput(sc->sc_wskbddev, sc->sc_rep, sc->sc_nrep); 963 splx(s); 964 callout_reset(&sc->sc_rawrepeat_ch, hz * REP_DELAYN / 1000, 965 ukbd_rawrepeat, sc); 966 } 967 #endif /* defined(WSDISPLAY_COMPAT_RAWKBD) && defined(UKBD_REPEAT) */ 968 969 int 970 ukbd_ioctl(void *v, u_long cmd, void *data, int flag, 971 struct lwp *l) 972 { 973 struct ukbd_softc *sc = v; 974 975 switch (cmd) { 976 case WSKBDIO_GTYPE: 977 *(int *)data = WSKBD_TYPE_USB; 978 return 0; 979 case WSKBDIO_SETLEDS: 980 ukbd_set_leds(v, *(int *)data); 981 return 0; 982 case WSKBDIO_GETLEDS: 983 *(int *)data = sc->sc_leds; 984 return 0; 985 #if defined(WSDISPLAY_COMPAT_RAWKBD) 986 case WSKBDIO_SETMODE: 987 DPRINTF(("%s: set raw = %d\n", __func__, *(int *)data)); 988 sc->sc_rawkbd = *(int *)data == WSKBD_RAW; 989 #if defined(UKBD_REPEAT) 990 callout_stop(&sc->sc_rawrepeat_ch); 991 #endif 992 return 0; 993 #endif 994 } 995 return EPASSTHROUGH; 996 } 997 998 /* 999 * This is a hack to work around some broken ports that don't call 1000 * cnpollc() before cngetc(). 1001 */ 1002 static int pollenter, warned; 1003 1004 /* Console interface. */ 1005 void 1006 ukbd_cngetc(void *v, u_int *type, int *data) 1007 { 1008 struct ukbd_softc *sc = v; 1009 int c; 1010 int broken; 1011 1012 if (pollenter == 0) { 1013 if (!warned) { 1014 printf("\n" 1015 "This port is broken, it does not call cnpollc() before calling cngetc().\n" 1016 "This should be fixed, but it will work anyway (for now).\n"); 1017 warned = 1; 1018 } 1019 broken = 1; 1020 ukbd_cnpollc(v, 1); 1021 } else 1022 broken = 0; 1023 1024 DPRINTFN(0,("%s: enter\n", __func__)); 1025 sc->sc_flags |= FLAG_POLLING; 1026 if (sc->sc_npollchar <= 0) 1027 usbd_dopoll(sc->sc_iface); 1028 sc->sc_flags &= ~FLAG_POLLING; 1029 if (sc->sc_npollchar > 0) { 1030 c = sc->sc_pollchars[0]; 1031 sc->sc_npollchar--; 1032 memmove(sc->sc_pollchars, sc->sc_pollchars+1, 1033 sc->sc_npollchar * sizeof(uint16_t)); 1034 *type = c & RELEASE ? WSCONS_EVENT_KEY_UP : WSCONS_EVENT_KEY_DOWN; 1035 *data = c & CODEMASK; 1036 DPRINTFN(0,("%s: return 0x%02x\n", __func__, c)); 1037 } else { 1038 *type = 0; 1039 *data = 0; 1040 } 1041 if (broken) 1042 ukbd_cnpollc(v, 0); 1043 } 1044 1045 void 1046 ukbd_cnpollc(void *v, int on) 1047 { 1048 struct ukbd_softc *sc = v; 1049 struct usbd_device *dev; 1050 1051 DPRINTFN(2,("%s: sc=%p on=%d\n", __func__, v, on)); 1052 1053 /* XXX Can this just use sc->sc_udev, or am I mistaken? */ 1054 usbd_interface2device_handle(sc->sc_iface, &dev); 1055 if (on) { 1056 sc->sc_spl = splusb(); 1057 pollenter++; 1058 } else { 1059 splx(sc->sc_spl); 1060 pollenter--; 1061 } 1062 usbd_set_polling(dev, on); 1063 } 1064 1065 int 1066 ukbd_cnattach(void) 1067 { 1068 1069 /* 1070 * XXX USB requires too many parts of the kernel to be running 1071 * XXX in order to work, so we can't do much for the console 1072 * XXX keyboard until autoconfiguration has run its course. 1073 */ 1074 ukbd_is_console = 1; 1075 return 0; 1076 } 1077 1078 const char * 1079 ukbd_parse_desc(struct ukbd_softc *sc) 1080 { 1081 struct hid_data *d; 1082 struct hid_item h; 1083 int size; 1084 void *desc; 1085 int ikey; 1086 1087 uhidev_get_report_desc(sc->sc_hdev, &desc, &size); 1088 ikey = 0; 1089 sc->sc_nkeycode = 0; 1090 d = hid_start_parse(desc, size, hid_input); 1091 while (hid_get_item(d, &h)) { 1092 /* Check for special Apple notebook FN key */ 1093 if (HID_GET_USAGE_PAGE(h.usage) == 0x00ff && 1094 HID_GET_USAGE(h.usage) == 0x0003 && 1095 h.kind == hid_input && (h.flags & HIO_VARIABLE)) { 1096 sc->sc_flags |= FLAG_APPLE_FN; 1097 sc->sc_apple_fn = h.loc; 1098 } 1099 1100 if (h.kind != hid_input || (h.flags & HIO_CONST) || 1101 HID_GET_USAGE_PAGE(h.usage) != HUP_KEYBOARD || 1102 h.report_ID != sc->sc_report_id) 1103 continue; 1104 DPRINTF(("%s: ikey=%d usage=%#x flags=%#x pos=%d size=%d " 1105 "cnt=%d\n", __func__, ikey, h.usage, h.flags, h.loc.pos, 1106 h.loc.size, h.loc.count)); 1107 if (h.flags & HIO_VARIABLE) { 1108 if (h.loc.size != 1) { 1109 hid_end_parse(d); 1110 return "bad modifier size"; 1111 } 1112 /* Single item */ 1113 if (ikey < MAXKEYS) { 1114 sc->sc_keyloc[ikey] = h.loc; 1115 sc->sc_keyuse[ikey] = HID_GET_USAGE(h.usage); 1116 ikey++; 1117 } else { 1118 hid_end_parse(d); 1119 return "too many Variable keys"; 1120 } 1121 } else { 1122 /* Array */ 1123 if (h.loc.size != 8) { 1124 hid_end_parse(d); 1125 return "key code size != 8"; 1126 } 1127 if (h.loc.count > MAXKEYCODE) 1128 h.loc.count = MAXKEYCODE; 1129 if (h.loc.pos % 8 != 0) { 1130 hid_end_parse(d); 1131 return "key codes not on byte boundary"; 1132 } 1133 if (sc->sc_nkeycode != 0) { 1134 hid_end_parse(d); 1135 return "multiple key code arrays"; 1136 } 1137 sc->sc_keycodeloc = h.loc; 1138 sc->sc_nkeycode = h.loc.count; 1139 } 1140 } 1141 sc->sc_nkeyloc = ikey; 1142 hid_end_parse(d); 1143 1144 hid_locate(desc, size, HID_USAGE2(HUP_LEDS, HUD_LED_NUM_LOCK), 1145 sc->sc_report_id, hid_output, &sc->sc_numloc, NULL); 1146 hid_locate(desc, size, HID_USAGE2(HUP_LEDS, HUD_LED_CAPS_LOCK), 1147 sc->sc_report_id, hid_output, &sc->sc_capsloc, NULL); 1148 hid_locate(desc, size, HID_USAGE2(HUP_LEDS, HUD_LED_SCROLL_LOCK), 1149 sc->sc_report_id, hid_output, &sc->sc_scroloc, NULL); 1150 hid_locate(desc, size, HID_USAGE2(HUP_LEDS, HUD_LED_COMPOSE), 1151 sc->sc_report_id, hid_output, &sc->sc_compose, NULL); 1152 1153 return NULL; 1154 } 1155