xref: /netbsd-src/sys/dev/usb/uipaq.c (revision b1c86f5f087524e68db12794ee9c3e3da1ab17a0)
1 /*	$NetBSD: uipaq.c,v 1.15 2009/11/12 19:58:27 dyoung Exp $	*/
2 /*	$OpenBSD: uipaq.c,v 1.1 2005/06/17 23:50:33 deraadt Exp $	*/
3 
4 /*
5  * Copyright (c) 2000-2005 The NetBSD Foundation, Inc.
6  * All rights reserved.
7  *
8  * This code is derived from software contributed to The NetBSD Foundation
9  * by Lennart Augustsson (lennart@augustsson.net) at
10  * Carlstedt Research & Technology.
11  *
12  * Redistribution and use in source and binary forms, with or without
13  * modification, are permitted provided that the following conditions
14  * are met:
15  * 1. Redistributions of source code must retain the above copyright
16  *    notice, this list of conditions and the following disclaimer.
17  * 2. Redistributions in binary form must reproduce the above copyright
18  *    notice, this list of conditions and the following disclaimer in the
19  *    documentation and/or other materials provided with the distribution.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
22  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
23  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
24  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
25  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31  * POSSIBILITY OF SUCH DAMAGE.
32  */
33 
34 /*
35  * iPAQ driver
36  *
37  * 19 July 2003:	Incorporated changes suggested by Sam Lawrance from
38  * 			the uppc module
39  *
40  *
41  * Contact isis@cs.umd.edu if you have any questions/comments about this driver
42  */
43 
44 #include <sys/cdefs.h>
45 __KERNEL_RCSID(0, "$NetBSD: uipaq.c,v 1.15 2009/11/12 19:58:27 dyoung Exp $");
46 
47 #include <sys/param.h>
48 #include <sys/systm.h>
49 #include <sys/kernel.h>
50 #include <sys/device.h>
51 #include <sys/conf.h>
52 #include <sys/tty.h>
53 
54 #include <dev/usb/usb.h>
55 
56 #include <dev/usb/usbcdc.h>	/*UCDC_* stuff */
57 
58 #include <dev/usb/usbdi.h>
59 #include <dev/usb/usbdi_util.h>
60 #include <dev/usb/usbdevs.h>
61 
62 #include <dev/usb/ucomvar.h>
63 
64 #ifdef UIPAQ_DEBUG
65 #define DPRINTF(x)	if (uipaqdebug) printf x
66 #define DPRINTFN(n,x)	if (uipaqdebug>(n)) printf x
67 int uipaqdebug = 0;
68 #else
69 #define DPRINTF(x)
70 #define DPRINTFN(n,x)
71 #endif
72 
73 #define UIPAQ_CONFIG_NO		1
74 #define UIPAQ_IFACE_INDEX	0
75 
76 #define UIPAQIBUFSIZE 1024
77 #define UIPAQOBUFSIZE 1024
78 
79 struct uipaq_softc {
80 	USBBASEDEVICE		sc_dev;		/* base device */
81 	usbd_device_handle	sc_udev;	/* device */
82 	usbd_interface_handle	sc_iface;	/* interface */
83 
84 	device_t		sc_subdev;	/* ucom uses that */
85 	u_int16_t		sc_lcr;		/* state for DTR/RTS */
86 
87 	u_int16_t		sc_flags;
88 
89 	u_char			sc_dying;
90 };
91 
92 /* Callback routines */
93 Static void	uipaq_set(void *, int, int, int);
94 
95 
96 /* Support routines. */
97 /* based on uppc module by Sam Lawrance */
98 Static void	uipaq_dtr(struct uipaq_softc *sc, int onoff);
99 Static void	uipaq_rts(struct uipaq_softc *sc, int onoff);
100 Static void	uipaq_break(struct uipaq_softc* sc, int onoff);
101 
102 
103 struct ucom_methods uipaq_methods = {
104 	NULL,
105 	uipaq_set,
106 	NULL,
107 	NULL,
108 	NULL,	/*open*/
109 	NULL,	/*close*/
110 	NULL,
111 	NULL
112 };
113 
114 struct uipaq_type {
115 	struct usb_devno	uv_dev;
116 	u_int16_t		uv_flags;
117 };
118 
119 static const struct uipaq_type uipaq_devs[] = {
120 	{{ USB_VENDOR_HP, USB_PRODUCT_HP_2215 }, 0 },
121 	{{ USB_VENDOR_HP, USB_PRODUCT_HP_568J }, 0},
122 	{{ USB_VENDOR_COMPAQ, USB_PRODUCT_COMPAQ_IPAQPOCKETPC} , 0},
123 	{{ USB_VENDOR_CASIO, USB_PRODUCT_CASIO_BE300} , 0},
124 	{{ USB_VENDOR_SHARP, USB_PRODUCT_SHARP_WS007SH} , 0},
125 	{{ USB_VENDOR_SHARP, USB_PRODUCT_SHARP_WS011SH} , 0}
126 };
127 
128 #define uipaq_lookup(v, p) ((const struct uipaq_type *)usb_lookup(uipaq_devs, v, p))
129 
130 int uipaq_match(device_t, cfdata_t, void *);
131 void uipaq_attach(device_t, device_t, void *);
132 void uipaq_childdet(device_t, device_t);
133 int uipaq_detach(device_t, int);
134 int uipaq_activate(device_t, enum devact);
135 extern struct cfdriver uipaq_cd;
136 CFATTACH_DECL2_NEW(uipaq, sizeof(struct uipaq_softc), uipaq_match,
137     uipaq_attach, uipaq_detach, uipaq_activate, NULL, uipaq_childdet);
138 
139 USB_MATCH(uipaq)
140 {
141 	USB_MATCH_START(uipaq, uaa);
142 
143 	DPRINTFN(20,("uipaq: vendor=0x%x, product=0x%x\n",
144 	    uaa->vendor, uaa->product));
145 
146 	return (uipaq_lookup(uaa->vendor, uaa->product) != NULL ?
147 	    UMATCH_VENDOR_PRODUCT : UMATCH_NONE);
148 }
149 
150 USB_ATTACH(uipaq)
151 {
152 	USB_ATTACH_START(uipaq, sc, uaa);
153 	usbd_device_handle dev = uaa->device;
154 	usbd_interface_handle iface;
155 	usb_interface_descriptor_t *id;
156 	usb_endpoint_descriptor_t *ed;
157 	char *devinfop;
158 	const char *devname = device_xname(self);
159 	int i;
160 	usbd_status err;
161 	struct ucom_attach_args uca;
162 
163 	DPRINTFN(10,("\nuipaq_attach: sc=%p\n", sc));
164 
165 	sc->sc_dev = self;
166 
167 	aprint_naive("\n");
168 	aprint_normal("\n");
169 
170 	devinfop = usbd_devinfo_alloc(dev, 0);
171 	aprint_normal_dev(self, "%s\n", devinfop);
172 	usbd_devinfo_free(devinfop);
173 
174 	/* Move the device into the configured state. */
175 	err = usbd_set_config_no(dev, UIPAQ_CONFIG_NO, 1);
176 	if (err) {
177 		aprint_error("\n%s: failed to set configuration, err=%s\n",
178 		    devname, usbd_errstr(err));
179 		goto bad;
180 	}
181 
182 	err = usbd_device2interface_handle(dev, UIPAQ_IFACE_INDEX, &iface);
183 	if (err) {
184 		aprint_error("\n%s: failed to get interface, err=%s\n",
185 		    devname, usbd_errstr(err));
186 		goto bad;
187 	}
188 
189 	sc->sc_flags = uipaq_lookup(uaa->vendor, uaa->product)->uv_flags;
190 
191 	id = usbd_get_interface_descriptor(iface);
192 
193 	sc->sc_udev = dev;
194 	sc->sc_iface = iface;
195 
196 	uca.ibufsize = UIPAQIBUFSIZE;
197 	uca.obufsize = UIPAQOBUFSIZE;
198 	uca.ibufsizepad = UIPAQIBUFSIZE;
199 	uca.opkthdrlen = 0;
200 	uca.device = dev;
201 	uca.iface = iface;
202 	uca.methods = &uipaq_methods;
203 	uca.arg = sc;
204 	uca.portno = UCOM_UNK_PORTNO;
205 	uca.info = "Generic";
206 
207 /*	err = uipaq_init(sc);
208 	if (err) {
209 		printf("%s: init failed, %s\n", USBDEVNAME(sc->sc_dev),
210 		    usbd_errstr(err));
211 		goto bad;
212 	}*/
213 
214 	usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
215 	    USBDEV(sc->sc_dev));
216 
217 	uca.bulkin = uca.bulkout = -1;
218 	for (i=0; i<id->bNumEndpoints; i++) {
219 		ed = usbd_interface2endpoint_descriptor(iface, i);
220 		if (ed == NULL) {
221 			aprint_error_dev(self,
222 			    "no endpoint descriptor for %d\n", i);
223 			goto bad;
224 		}
225 		if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
226 		    (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
227 			uca.bulkin = ed->bEndpointAddress;
228 		} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
229 		    (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
230 			uca.bulkout = ed->bEndpointAddress;
231 		}
232 	}
233 	if (uca.bulkin == -1 || uca.bulkout == -1) {
234 		aprint_error_dev(self, "no proper endpoints found (%d,%d) \n",
235 		    uca.bulkin, uca.bulkout);
236 		USB_ATTACH_ERROR_RETURN;
237 	}
238 
239 	sc->sc_subdev = config_found_sm_loc(self, "ucombus", NULL, &uca,
240 					    ucomprint, ucomsubmatch);
241 
242 	USB_ATTACH_SUCCESS_RETURN;
243 
244 bad:
245 	DPRINTF(("uipaq_attach: ATTACH ERROR\n"));
246 	sc->sc_dying = 1;
247 	USB_ATTACH_ERROR_RETURN;
248 }
249 
250 
251 void
252 uipaq_dtr(struct uipaq_softc* sc, int onoff)
253 {
254 	usb_device_request_t req;
255 	usbd_status err;
256 	int retries = 3;
257 
258 	DPRINTF(("%s: uipaq_dtr: onoff=%x\n", USBDEVNAME(sc->sc_dev), onoff));
259 
260 	/* Avoid sending unnecessary requests */
261 	if (onoff && (sc->sc_lcr & UCDC_LINE_DTR))
262 		return;
263 	if (!onoff && !(sc->sc_lcr & UCDC_LINE_DTR))
264 		return;
265 
266 	/* Other parameters depend on reg */
267 	req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
268 	req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
269 	sc->sc_lcr = onoff ? sc->sc_lcr | UCDC_LINE_DTR : sc->sc_lcr & ~UCDC_LINE_DTR;
270 	USETW(req.wValue, sc->sc_lcr);
271 	USETW(req.wIndex, 0x0);
272 	USETW(req.wLength, 0);
273 
274 	/* Fire off the request a few times if necessary */
275 	while (retries) {
276 		err = usbd_do_request(sc->sc_udev, &req, NULL);
277 		if (!err)
278 			break;
279 		retries--;
280 	}
281 }
282 
283 
284 void
285 uipaq_rts(struct uipaq_softc* sc, int onoff)
286 {
287 	usb_device_request_t req;
288 	usbd_status err;
289 	int retries = 3;
290 
291 	DPRINTF(("%s: uipaq_rts: onoff=%x\n", USBDEVNAME(sc->sc_dev), onoff));
292 
293 	/* Avoid sending unnecessary requests */
294 	if (onoff && (sc->sc_lcr & UCDC_LINE_RTS)) return;
295 	if (!onoff && !(sc->sc_lcr & UCDC_LINE_RTS)) return;
296 
297 	req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
298 	req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
299 	sc->sc_lcr = onoff ? sc->sc_lcr | UCDC_LINE_RTS : sc->sc_lcr & ~UCDC_LINE_RTS;
300 	USETW(req.wValue, sc->sc_lcr);
301 	USETW(req.wIndex, 0x0);
302 	USETW(req.wLength, 0);
303 
304 	while (retries) {
305 		err = usbd_do_request(sc->sc_udev, &req, NULL);
306 		if (!err)
307 			break;
308 		retries--;
309 	}
310 }
311 
312 
313 void
314 uipaq_break(struct uipaq_softc* sc, int onoff)
315 {
316 	usb_device_request_t req;
317 	usbd_status err;
318 	int retries = 3;
319 
320 	DPRINTF(("%s: uipaq_break: onoff=%x\n", USBDEVNAME(sc->sc_dev), onoff));
321 
322 	req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
323 	req.bRequest = UCDC_SEND_BREAK;
324 
325 	USETW(req.wValue, onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF);
326 	USETW(req.wIndex, 0x0);
327 	USETW(req.wLength, 0);
328 
329 	while (retries) {
330 		err = usbd_do_request(sc->sc_udev, &req, NULL);
331 		if (!err)
332 			break;
333 		retries--;
334 	}
335 }
336 
337 
338 void
339 uipaq_set(void *addr, int portno, int reg, int onoff)
340 {
341 	struct uipaq_softc* sc = addr;
342 
343 	switch (reg) {
344 	case UCOM_SET_DTR:
345 		uipaq_dtr(addr, onoff);
346 		break;
347 	case UCOM_SET_RTS:
348 		uipaq_rts(addr, onoff);
349 		break;
350 	case UCOM_SET_BREAK:
351 		uipaq_break(addr, onoff);
352 		break;
353 	default:
354 		aprint_error_dev(sc->sc_dev,
355 		    "unhandled set request: reg=%x onoff=%x\n", reg, onoff);
356 		return;
357 	}
358 }
359 
360 
361 int
362 uipaq_activate(device_t self, enum devact act)
363 {
364 	struct uipaq_softc *sc = device_private(self);
365 
366 	switch (act) {
367 	case DVACT_DEACTIVATE:
368 		sc->sc_dying = 1;
369 		return 0;
370 	default:
371 		return EOPNOTSUPP;
372 	}
373 }
374 
375 void
376 uipaq_childdet(device_t self, device_t child)
377 {
378 	struct uipaq_softc *sc = device_private(self);
379 
380 	KASSERT(sc->sc_subdev == child);
381 	sc->sc_subdev = NULL;
382 }
383 
384 int
385 uipaq_detach(device_t self, int flags)
386 {
387 	struct uipaq_softc *sc = device_private(self);
388 	int rv = 0;
389 
390 	DPRINTF(("uipaq_detach: sc=%p flags=%d\n", sc, flags));
391 	sc->sc_dying = 1;
392 	if (sc->sc_subdev != NULL)
393 		rv |= config_detach(sc->sc_subdev, flags);
394 
395 	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev,
396 	    USBDEV(sc->sc_dev));
397 
398 	return (rv);
399 }
400 
401