xref: /netbsd-src/sys/dev/usb/uipaq.c (revision 6a493d6bc668897c91594964a732d38505b70cbb)
1 /*	$NetBSD: uipaq.c,v 1.19 2012/12/27 16:42:32 skrll Exp $	*/
2 /*	$OpenBSD: uipaq.c,v 1.1 2005/06/17 23:50:33 deraadt Exp $	*/
3 
4 /*
5  * Copyright (c) 2000-2005 The NetBSD Foundation, Inc.
6  * All rights reserved.
7  *
8  * This code is derived from software contributed to The NetBSD Foundation
9  * by Lennart Augustsson (lennart@augustsson.net) at
10  * Carlstedt Research & Technology.
11  *
12  * Redistribution and use in source and binary forms, with or without
13  * modification, are permitted provided that the following conditions
14  * are met:
15  * 1. Redistributions of source code must retain the above copyright
16  *    notice, this list of conditions and the following disclaimer.
17  * 2. Redistributions in binary form must reproduce the above copyright
18  *    notice, this list of conditions and the following disclaimer in the
19  *    documentation and/or other materials provided with the distribution.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
22  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
23  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
24  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
25  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31  * POSSIBILITY OF SUCH DAMAGE.
32  */
33 
34 /*
35  * iPAQ driver
36  *
37  * 19 July 2003:	Incorporated changes suggested by Sam Lawrance from
38  * 			the uppc module
39  *
40  *
41  * Contact isis@cs.umd.edu if you have any questions/comments about this driver
42  */
43 
44 #include <sys/cdefs.h>
45 __KERNEL_RCSID(0, "$NetBSD: uipaq.c,v 1.19 2012/12/27 16:42:32 skrll Exp $");
46 
47 #include <sys/param.h>
48 #include <sys/systm.h>
49 #include <sys/kernel.h>
50 #include <sys/device.h>
51 #include <sys/conf.h>
52 #include <sys/tty.h>
53 
54 #include <dev/usb/usb.h>
55 
56 #include <dev/usb/usbcdc.h>	/*UCDC_* stuff */
57 
58 #include <dev/usb/usbdi.h>
59 #include <dev/usb/usbdi_util.h>
60 #include <dev/usb/usbdevs.h>
61 
62 #include <dev/usb/ucomvar.h>
63 
64 #ifdef UIPAQ_DEBUG
65 #define DPRINTF(x)	if (uipaqdebug) printf x
66 #define DPRINTFN(n,x)	if (uipaqdebug>(n)) printf x
67 int uipaqdebug = 0;
68 #else
69 #define DPRINTF(x)
70 #define DPRINTFN(n,x)
71 #endif
72 
73 #define UIPAQ_CONFIG_NO		1
74 #define UIPAQ_IFACE_INDEX	0
75 
76 #define UIPAQIBUFSIZE 1024
77 #define UIPAQOBUFSIZE 1024
78 
79 struct uipaq_softc {
80 	device_t		sc_dev;		/* base device */
81 	usbd_device_handle	sc_udev;	/* device */
82 	usbd_interface_handle	sc_iface;	/* interface */
83 
84 	device_t		sc_subdev;	/* ucom uses that */
85 	u_int16_t		sc_lcr;		/* state for DTR/RTS */
86 
87 	u_int16_t		sc_flags;
88 
89 	u_char			sc_dying;
90 };
91 
92 /* Callback routines */
93 Static void	uipaq_set(void *, int, int, int);
94 
95 
96 /* Support routines. */
97 /* based on uppc module by Sam Lawrance */
98 Static void	uipaq_dtr(struct uipaq_softc *sc, int onoff);
99 Static void	uipaq_rts(struct uipaq_softc *sc, int onoff);
100 Static void	uipaq_break(struct uipaq_softc* sc, int onoff);
101 
102 
103 struct ucom_methods uipaq_methods = {
104 	NULL,
105 	uipaq_set,
106 	NULL,
107 	NULL,
108 	NULL,	/*open*/
109 	NULL,	/*close*/
110 	NULL,
111 	NULL
112 };
113 
114 struct uipaq_type {
115 	struct usb_devno	uv_dev;
116 	u_int16_t		uv_flags;
117 };
118 
119 static const struct uipaq_type uipaq_devs[] = {
120 	{{ USB_VENDOR_HP, USB_PRODUCT_HP_2215 }, 0 },
121 	{{ USB_VENDOR_HP, USB_PRODUCT_HP_568J }, 0},
122 	{{ USB_VENDOR_COMPAQ, USB_PRODUCT_COMPAQ_IPAQPOCKETPC} , 0},
123 	{{ USB_VENDOR_CASIO, USB_PRODUCT_CASIO_BE300} , 0},
124 	{{ USB_VENDOR_SHARP, USB_PRODUCT_SHARP_WS007SH} , 0},
125 	{{ USB_VENDOR_SHARP, USB_PRODUCT_SHARP_WS011SH} , 0}
126 };
127 
128 #define uipaq_lookup(v, p) ((const struct uipaq_type *)usb_lookup(uipaq_devs, v, p))
129 
130 int uipaq_match(device_t, cfdata_t, void *);
131 void uipaq_attach(device_t, device_t, void *);
132 void uipaq_childdet(device_t, device_t);
133 int uipaq_detach(device_t, int);
134 int uipaq_activate(device_t, enum devact);
135 extern struct cfdriver uipaq_cd;
136 CFATTACH_DECL2_NEW(uipaq, sizeof(struct uipaq_softc), uipaq_match,
137     uipaq_attach, uipaq_detach, uipaq_activate, NULL, uipaq_childdet);
138 
139 int
140 uipaq_match(device_t parent, cfdata_t match, void *aux)
141 {
142 	struct usb_attach_arg *uaa = aux;
143 
144 	DPRINTFN(20,("uipaq: vendor=0x%x, product=0x%x\n",
145 	    uaa->vendor, uaa->product));
146 
147 	return (uipaq_lookup(uaa->vendor, uaa->product) != NULL ?
148 	    UMATCH_VENDOR_PRODUCT : UMATCH_NONE);
149 }
150 
151 void
152 uipaq_attach(device_t parent, device_t self, void *aux)
153 {
154 	struct uipaq_softc *sc = device_private(self);
155 	struct usb_attach_arg *uaa = aux;
156 	usbd_device_handle dev = uaa->device;
157 	usbd_interface_handle iface;
158 	usb_interface_descriptor_t *id;
159 	usb_endpoint_descriptor_t *ed;
160 	char *devinfop;
161 	const char *devname = device_xname(self);
162 	int i;
163 	usbd_status err;
164 	struct ucom_attach_args uca;
165 
166 	DPRINTFN(10,("\nuipaq_attach: sc=%p\n", sc));
167 
168 	sc->sc_dev = self;
169 
170 	aprint_naive("\n");
171 	aprint_normal("\n");
172 
173 	devinfop = usbd_devinfo_alloc(dev, 0);
174 	aprint_normal_dev(self, "%s\n", devinfop);
175 	usbd_devinfo_free(devinfop);
176 
177 	/* Move the device into the configured state. */
178 	err = usbd_set_config_no(dev, UIPAQ_CONFIG_NO, 1);
179 	if (err) {
180 		aprint_error_dev(self, "failed to set configuration"
181 		    ", err=%s\n", usbd_errstr(err));
182 		goto bad;
183 	}
184 
185 	err = usbd_device2interface_handle(dev, UIPAQ_IFACE_INDEX, &iface);
186 	if (err) {
187 		aprint_error("\n%s: failed to get interface, err=%s\n",
188 		    devname, usbd_errstr(err));
189 		goto bad;
190 	}
191 
192 	sc->sc_flags = uipaq_lookup(uaa->vendor, uaa->product)->uv_flags;
193 
194 	id = usbd_get_interface_descriptor(iface);
195 
196 	sc->sc_udev = dev;
197 	sc->sc_iface = iface;
198 
199 	uca.ibufsize = UIPAQIBUFSIZE;
200 	uca.obufsize = UIPAQOBUFSIZE;
201 	uca.ibufsizepad = UIPAQIBUFSIZE;
202 	uca.opkthdrlen = 0;
203 	uca.device = dev;
204 	uca.iface = iface;
205 	uca.methods = &uipaq_methods;
206 	uca.arg = sc;
207 	uca.portno = UCOM_UNK_PORTNO;
208 	uca.info = "Generic";
209 
210 /*	err = uipaq_init(sc);
211 	if (err) {
212 		printf("%s: init failed, %s\n", device_xname(sc->sc_dev),
213 		    usbd_errstr(err));
214 		goto bad;
215 	}*/
216 
217 	usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
218 	    sc->sc_dev);
219 
220 	uca.bulkin = uca.bulkout = -1;
221 	for (i=0; i<id->bNumEndpoints; i++) {
222 		ed = usbd_interface2endpoint_descriptor(iface, i);
223 		if (ed == NULL) {
224 			aprint_error_dev(self,
225 			    "no endpoint descriptor for %d\n", i);
226 			goto bad;
227 		}
228 		if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
229 		    (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
230 			uca.bulkin = ed->bEndpointAddress;
231 		} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
232 		    (ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
233 			uca.bulkout = ed->bEndpointAddress;
234 		}
235 	}
236 	if (uca.bulkin == -1 || uca.bulkout == -1) {
237 		aprint_error_dev(self, "no proper endpoints found (%d,%d) \n",
238 		    uca.bulkin, uca.bulkout);
239 		return;
240 	}
241 
242 	sc->sc_subdev = config_found_sm_loc(self, "ucombus", NULL, &uca,
243 					    ucomprint, ucomsubmatch);
244 
245 	return;
246 
247 bad:
248 	DPRINTF(("uipaq_attach: ATTACH ERROR\n"));
249 	sc->sc_dying = 1;
250 	return;
251 }
252 
253 
254 void
255 uipaq_dtr(struct uipaq_softc* sc, int onoff)
256 {
257 	usb_device_request_t req;
258 	usbd_status err;
259 	int retries = 3;
260 
261 	DPRINTF(("%s: uipaq_dtr: onoff=%x\n", device_xname(sc->sc_dev), onoff));
262 
263 	/* Avoid sending unnecessary requests */
264 	if (onoff && (sc->sc_lcr & UCDC_LINE_DTR))
265 		return;
266 	if (!onoff && !(sc->sc_lcr & UCDC_LINE_DTR))
267 		return;
268 
269 	/* Other parameters depend on reg */
270 	req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
271 	req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
272 	sc->sc_lcr = onoff ? sc->sc_lcr | UCDC_LINE_DTR : sc->sc_lcr & ~UCDC_LINE_DTR;
273 	USETW(req.wValue, sc->sc_lcr);
274 	USETW(req.wIndex, 0x0);
275 	USETW(req.wLength, 0);
276 
277 	/* Fire off the request a few times if necessary */
278 	while (retries) {
279 		err = usbd_do_request(sc->sc_udev, &req, NULL);
280 		if (!err)
281 			break;
282 		retries--;
283 	}
284 }
285 
286 
287 void
288 uipaq_rts(struct uipaq_softc* sc, int onoff)
289 {
290 	usb_device_request_t req;
291 	usbd_status err;
292 	int retries = 3;
293 
294 	DPRINTF(("%s: uipaq_rts: onoff=%x\n", device_xname(sc->sc_dev), onoff));
295 
296 	/* Avoid sending unnecessary requests */
297 	if (onoff && (sc->sc_lcr & UCDC_LINE_RTS)) return;
298 	if (!onoff && !(sc->sc_lcr & UCDC_LINE_RTS)) return;
299 
300 	req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
301 	req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
302 	sc->sc_lcr = onoff ? sc->sc_lcr | UCDC_LINE_RTS : sc->sc_lcr & ~UCDC_LINE_RTS;
303 	USETW(req.wValue, sc->sc_lcr);
304 	USETW(req.wIndex, 0x0);
305 	USETW(req.wLength, 0);
306 
307 	while (retries) {
308 		err = usbd_do_request(sc->sc_udev, &req, NULL);
309 		if (!err)
310 			break;
311 		retries--;
312 	}
313 }
314 
315 
316 void
317 uipaq_break(struct uipaq_softc* sc, int onoff)
318 {
319 	usb_device_request_t req;
320 	usbd_status err;
321 	int retries = 3;
322 
323 	DPRINTF(("%s: uipaq_break: onoff=%x\n", device_xname(sc->sc_dev), onoff));
324 
325 	req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
326 	req.bRequest = UCDC_SEND_BREAK;
327 
328 	USETW(req.wValue, onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF);
329 	USETW(req.wIndex, 0x0);
330 	USETW(req.wLength, 0);
331 
332 	while (retries) {
333 		err = usbd_do_request(sc->sc_udev, &req, NULL);
334 		if (!err)
335 			break;
336 		retries--;
337 	}
338 }
339 
340 
341 void
342 uipaq_set(void *addr, int portno, int reg, int onoff)
343 {
344 	struct uipaq_softc* sc = addr;
345 
346 	switch (reg) {
347 	case UCOM_SET_DTR:
348 		uipaq_dtr(addr, onoff);
349 		break;
350 	case UCOM_SET_RTS:
351 		uipaq_rts(addr, onoff);
352 		break;
353 	case UCOM_SET_BREAK:
354 		uipaq_break(addr, onoff);
355 		break;
356 	default:
357 		aprint_error_dev(sc->sc_dev,
358 		    "unhandled set request: reg=%x onoff=%x\n", reg, onoff);
359 		return;
360 	}
361 }
362 
363 
364 int
365 uipaq_activate(device_t self, enum devact act)
366 {
367 	struct uipaq_softc *sc = device_private(self);
368 
369 	switch (act) {
370 	case DVACT_DEACTIVATE:
371 		sc->sc_dying = 1;
372 		return 0;
373 	default:
374 		return EOPNOTSUPP;
375 	}
376 }
377 
378 void
379 uipaq_childdet(device_t self, device_t child)
380 {
381 	struct uipaq_softc *sc = device_private(self);
382 
383 	KASSERT(sc->sc_subdev == child);
384 	sc->sc_subdev = NULL;
385 }
386 
387 int
388 uipaq_detach(device_t self, int flags)
389 {
390 	struct uipaq_softc *sc = device_private(self);
391 	int rv = 0;
392 
393 	DPRINTF(("uipaq_detach: sc=%p flags=%d\n", sc, flags));
394 	sc->sc_dying = 1;
395 	if (sc->sc_subdev != NULL)
396 		rv |= config_detach(sc->sc_subdev, flags);
397 
398 	usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev,
399 	    sc->sc_dev);
400 
401 	return (rv);
402 }
403 
404