1 /* $NetBSD: uchcom.c,v 1.12 2011/12/23 00:51:45 jakllsch Exp $ */ 2 3 /* 4 * Copyright (c) 2007 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Takuya SHIOZAKI (tshiozak@netbsd.org). 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 #include <sys/cdefs.h> 33 __KERNEL_RCSID(0, "$NetBSD: uchcom.c,v 1.12 2011/12/23 00:51:45 jakllsch Exp $"); 34 35 /* 36 * driver for WinChipHead CH341/340, the worst USB-serial chip in the world. 37 */ 38 39 #include <sys/param.h> 40 #include <sys/systm.h> 41 #include <sys/kernel.h> 42 #include <sys/malloc.h> 43 #include <sys/ioctl.h> 44 #include <sys/conf.h> 45 #include <sys/tty.h> 46 #include <sys/file.h> 47 #include <sys/select.h> 48 #include <sys/proc.h> 49 #include <sys/device.h> 50 #include <sys/poll.h> 51 #include <sys/workqueue.h> 52 53 #include <dev/usb/usb.h> 54 #include <dev/usb/usbcdc.h> 55 56 #include <dev/usb/usbdi.h> 57 #include <dev/usb/usbdi_util.h> 58 #include <dev/usb/usbdevs.h> 59 #include <dev/usb/usb_quirks.h> 60 61 #include <dev/usb/ucomvar.h> 62 63 #ifdef UCHCOM_DEBUG 64 #define DPRINTFN(n, x) if (uchcomdebug > (n)) printf x 65 int uchcomdebug = 0; 66 #else 67 #define DPRINTFN(n, x) 68 #endif 69 #define DPRINTF(x) DPRINTFN(0, x) 70 71 #define UCHCOM_IFACE_INDEX 0 72 #define UCHCOM_CONFIG_INDEX 0 73 74 #define UCHCOM_REV_CH340 0x0250 75 #define UCHCOM_INPUT_BUF_SIZE 8 76 77 #define UCHCOM_REQ_GET_VERSION 0x5F 78 #define UCHCOM_REQ_READ_REG 0x95 79 #define UCHCOM_REQ_WRITE_REG 0x9A 80 #define UCHCOM_REQ_RESET 0xA1 81 #define UCHCOM_REQ_SET_DTRRTS 0xA4 82 83 #define UCHCOM_REG_STAT1 0x06 84 #define UCHCOM_REG_STAT2 0x07 85 #define UCHCOM_REG_BPS_PRE 0x12 86 #define UCHCOM_REG_BPS_DIV 0x13 87 #define UCHCOM_REG_BPS_MOD 0x14 88 #define UCHCOM_REG_BPS_PAD 0x0F 89 #define UCHCOM_REG_BREAK1 0x05 90 #define UCHCOM_REG_BREAK2 0x18 91 #define UCHCOM_REG_LCR1 0x18 92 #define UCHCOM_REG_LCR2 0x25 93 94 #define UCHCOM_VER_20 0x20 95 96 #define UCHCOM_BASE_UNKNOWN 0 97 #define UCHCOM_BPS_MOD_BASE 20000000 98 #define UCHCOM_BPS_MOD_BASE_OFS 1100 99 100 #define UCHCOM_DTR_MASK 0x20 101 #define UCHCOM_RTS_MASK 0x40 102 103 #define UCHCOM_BRK1_MASK 0x01 104 #define UCHCOM_BRK2_MASK 0x40 105 106 #define UCHCOM_LCR1_MASK 0xAF 107 #define UCHCOM_LCR2_MASK 0x07 108 #define UCHCOM_LCR1_PARENB 0x80 109 #define UCHCOM_LCR2_PAREVEN 0x07 110 #define UCHCOM_LCR2_PARODD 0x06 111 #define UCHCOM_LCR2_PARMARK 0x05 112 #define UCHCOM_LCR2_PARSPACE 0x04 113 114 #define UCHCOM_INTR_STAT1 0x02 115 #define UCHCOM_INTR_STAT2 0x03 116 #define UCHCOM_INTR_LEAST 4 117 118 #define UCHCOMIBUFSIZE 256 119 #define UCHCOMOBUFSIZE 256 120 121 struct uchcom_softc 122 { 123 device_t sc_dev; 124 usbd_device_handle sc_udev; 125 device_t sc_subdev; 126 usbd_interface_handle sc_iface; 127 int sc_dying; 128 /* */ 129 int sc_intr_endpoint; 130 int sc_intr_size; 131 usbd_pipe_handle sc_intr_pipe; 132 u_char *sc_intr_buf; 133 /* */ 134 uint8_t sc_version; 135 int sc_dtr; 136 int sc_rts; 137 u_char sc_lsr; 138 u_char sc_msr; 139 int sc_lcr1; 140 int sc_lcr2; 141 }; 142 143 struct uchcom_endpoints 144 { 145 int ep_bulkin; 146 int ep_bulkout; 147 int ep_intr; 148 int ep_intr_size; 149 }; 150 151 struct uchcom_divider 152 { 153 uint8_t dv_prescaler; 154 uint8_t dv_div; 155 uint8_t dv_mod; 156 }; 157 158 struct uchcom_divider_record 159 { 160 uint32_t dvr_high; 161 uint32_t dvr_low; 162 uint32_t dvr_base_clock; 163 struct uchcom_divider dvr_divider; 164 }; 165 166 static const struct uchcom_divider_record dividers[] = 167 { 168 { 307200, 307200, UCHCOM_BASE_UNKNOWN, { 7, 0xD9, 0 } }, 169 { 921600, 921600, UCHCOM_BASE_UNKNOWN, { 7, 0xF3, 0 } }, 170 { 2999999, 23530, 6000000, { 3, 0, 0 } }, 171 { 23529, 2942, 750000, { 2, 0, 0 } }, 172 { 2941, 368, 93750, { 1, 0, 0 } }, 173 { 367, 1, 11719, { 0, 0, 0 } }, 174 }; 175 #define NUM_DIVIDERS (sizeof (dividers) / sizeof (dividers[0])) 176 177 static const struct usb_devno uchcom_devs[] = { 178 { USB_VENDOR_WINCHIPHEAD, USB_PRODUCT_WINCHIPHEAD_CH341SER }, 179 { USB_VENDOR_WINCHIPHEAD2, USB_PRODUCT_WINCHIPHEAD2_CH341 }, 180 }; 181 #define uchcom_lookup(v, p) usb_lookup(uchcom_devs, v, p) 182 183 Static void uchcom_get_status(void *, int, u_char *, u_char *); 184 Static void uchcom_set(void *, int, int, int); 185 Static int uchcom_param(void *, int, struct termios *); 186 Static int uchcom_open(void *, int); 187 Static void uchcom_close(void *, int); 188 Static void uchcom_intr(usbd_xfer_handle, usbd_private_handle, 189 usbd_status); 190 191 static int set_config(struct uchcom_softc *); 192 static int find_ifaces(struct uchcom_softc *, usbd_interface_handle *); 193 static int find_endpoints(struct uchcom_softc *, 194 struct uchcom_endpoints *); 195 static void close_intr_pipe(struct uchcom_softc *); 196 197 198 struct ucom_methods uchcom_methods = { 199 .ucom_get_status = uchcom_get_status, 200 .ucom_set = uchcom_set, 201 .ucom_param = uchcom_param, 202 .ucom_ioctl = NULL, 203 .ucom_open = uchcom_open, 204 .ucom_close = uchcom_close, 205 .ucom_read = NULL, 206 .ucom_write = NULL, 207 }; 208 209 int uchcom_match(device_t, cfdata_t, void *); 210 void uchcom_attach(device_t, device_t, void *); 211 void uchcom_childdet(device_t, device_t); 212 int uchcom_detach(device_t, int); 213 int uchcom_activate(device_t, enum devact); 214 215 extern struct cfdriver uchcom_cd; 216 217 CFATTACH_DECL2_NEW(uchcom, 218 sizeof(struct uchcom_softc), 219 uchcom_match, 220 uchcom_attach, 221 uchcom_detach, 222 uchcom_activate, 223 NULL, 224 uchcom_childdet); 225 226 /* ---------------------------------------------------------------------- 227 * driver entry points 228 */ 229 230 int 231 uchcom_match(device_t parent, cfdata_t match, void *aux) 232 { 233 struct usb_attach_arg *uaa = aux; 234 235 return (uchcom_lookup(uaa->vendor, uaa->product) != NULL ? 236 UMATCH_VENDOR_PRODUCT : UMATCH_NONE); 237 } 238 239 void 240 uchcom_attach(device_t parent, device_t self, void *aux) 241 { 242 struct uchcom_softc *sc = device_private(self); 243 struct usb_attach_arg *uaa = aux; 244 usbd_device_handle dev = uaa->device; 245 char *devinfop; 246 struct uchcom_endpoints endpoints; 247 struct ucom_attach_args uca; 248 249 aprint_naive("\n"); 250 aprint_normal("\n"); 251 252 devinfop = usbd_devinfo_alloc(dev, 0); 253 aprint_normal_dev(self, "%s\n", devinfop); 254 usbd_devinfo_free(devinfop); 255 256 sc->sc_dev = self; 257 sc->sc_udev = dev; 258 sc->sc_dying = 0; 259 sc->sc_dtr = sc->sc_rts = -1; 260 sc->sc_lsr = sc->sc_msr = 0; 261 262 DPRINTF(("\n\nuchcom attach: sc=%p\n", sc)); 263 264 if (set_config(sc)) 265 goto failed; 266 267 switch (uaa->release) { 268 case UCHCOM_REV_CH340: 269 aprint_normal_dev(self, "CH340 detected\n"); 270 break; 271 default: 272 aprint_normal_dev(self, "CH341 detected\n"); 273 break; 274 } 275 276 if (find_ifaces(sc, &sc->sc_iface)) 277 goto failed; 278 279 if (find_endpoints(sc, &endpoints)) 280 goto failed; 281 282 sc->sc_intr_endpoint = endpoints.ep_intr; 283 sc->sc_intr_size = endpoints.ep_intr_size; 284 285 /* setup ucom layer */ 286 uca.portno = UCOM_UNK_PORTNO; 287 uca.bulkin = endpoints.ep_bulkin; 288 uca.bulkout = endpoints.ep_bulkout; 289 uca.ibufsize = UCHCOMIBUFSIZE; 290 uca.obufsize = UCHCOMOBUFSIZE; 291 uca.ibufsizepad = UCHCOMIBUFSIZE; 292 uca.opkthdrlen = 0; 293 uca.device = dev; 294 uca.iface = sc->sc_iface; 295 uca.methods = &uchcom_methods; 296 uca.arg = sc; 297 uca.info = NULL; 298 299 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, 300 sc->sc_dev); 301 302 sc->sc_subdev = config_found_sm_loc(self, "ucombus", NULL, &uca, 303 ucomprint, ucomsubmatch); 304 305 return; 306 307 failed: 308 sc->sc_dying = 1; 309 return; 310 } 311 312 void 313 uchcom_childdet(device_t self, device_t child) 314 { 315 struct uchcom_softc *sc = device_private(self); 316 317 KASSERT(sc->sc_subdev == child); 318 sc->sc_subdev = NULL; 319 } 320 321 int 322 uchcom_detach(device_t self, int flags) 323 { 324 struct uchcom_softc *sc = device_private(self); 325 int rv = 0; 326 327 DPRINTF(("uchcom_detach: sc=%p flags=%d\n", sc, flags)); 328 329 close_intr_pipe(sc); 330 331 sc->sc_dying = 1; 332 333 if (sc->sc_subdev != NULL) 334 rv = config_detach(sc->sc_subdev, flags); 335 336 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, 337 sc->sc_dev); 338 339 return rv; 340 } 341 342 int 343 uchcom_activate(device_t self, enum devact act) 344 { 345 struct uchcom_softc *sc = device_private(self); 346 347 switch (act) { 348 case DVACT_DEACTIVATE: 349 close_intr_pipe(sc); 350 sc->sc_dying = 1; 351 return 0; 352 default: 353 return EOPNOTSUPP; 354 } 355 } 356 357 static int 358 set_config(struct uchcom_softc *sc) 359 { 360 usbd_status err; 361 362 err = usbd_set_config_index(sc->sc_udev, UCHCOM_CONFIG_INDEX, 1); 363 if (err) { 364 aprint_error_dev(sc->sc_dev, 365 "failed to set configuration: %s\n", usbd_errstr(err)); 366 return -1; 367 } 368 369 return 0; 370 } 371 372 static int 373 find_ifaces(struct uchcom_softc *sc, usbd_interface_handle *riface) 374 { 375 usbd_status err; 376 377 err = usbd_device2interface_handle(sc->sc_udev, UCHCOM_IFACE_INDEX, 378 riface); 379 if (err) { 380 aprint_error("\n%s: failed to get interface: %s\n", 381 device_xname(sc->sc_dev), usbd_errstr(err)); 382 return -1; 383 } 384 385 return 0; 386 } 387 388 static int 389 find_endpoints(struct uchcom_softc *sc, struct uchcom_endpoints *endpoints) 390 { 391 int i, bin=-1, bout=-1, intr=-1, isize=0; 392 usb_interface_descriptor_t *id; 393 usb_endpoint_descriptor_t *ed; 394 395 id = usbd_get_interface_descriptor(sc->sc_iface); 396 397 for (i = 0; i < id->bNumEndpoints; i++) { 398 ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i); 399 if (ed == NULL) { 400 aprint_error_dev(sc->sc_dev, 401 "no endpoint descriptor for %d\n", i); 402 return -1; 403 } 404 405 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 406 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { 407 intr = ed->bEndpointAddress; 408 isize = UGETW(ed->wMaxPacketSize); 409 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 410 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 411 bin = ed->bEndpointAddress; 412 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && 413 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 414 bout = ed->bEndpointAddress; 415 } 416 } 417 418 if (intr == -1 || bin == -1 || bout == -1) { 419 if (intr == -1) { 420 aprint_error_dev(sc->sc_dev, 421 "no interrupt end point\n"); 422 } 423 if (bin == -1) { 424 aprint_error_dev(sc->sc_dev, 425 "no data bulk in end point\n"); 426 } 427 if (bout == -1) { 428 aprint_error_dev(sc->sc_dev, 429 "no data bulk out end point\n"); 430 } 431 return -1; 432 } 433 if (isize < UCHCOM_INTR_LEAST) { 434 aprint_error_dev(sc->sc_dev, "intr pipe is too short\n"); 435 return -1; 436 } 437 438 DPRINTF(("%s: bulkin=%d, bulkout=%d, intr=%d, isize=%d\n", 439 device_xname(sc->sc_dev), bin, bout, intr, isize)); 440 441 endpoints->ep_intr = intr; 442 endpoints->ep_intr_size = isize; 443 endpoints->ep_bulkin = bin; 444 endpoints->ep_bulkout = bout; 445 446 return 0; 447 } 448 449 450 /* ---------------------------------------------------------------------- 451 * low level i/o 452 */ 453 454 static __inline usbd_status 455 generic_control_out(struct uchcom_softc *sc, uint8_t reqno, 456 uint16_t value, uint16_t index) 457 { 458 usb_device_request_t req; 459 460 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 461 req.bRequest = reqno; 462 USETW(req.wValue, value); 463 USETW(req.wIndex, index); 464 USETW(req.wLength, 0); 465 466 return usbd_do_request(sc->sc_udev, &req, 0); 467 } 468 469 static __inline usbd_status 470 generic_control_in(struct uchcom_softc *sc, uint8_t reqno, 471 uint16_t value, uint16_t index, void *buf, int buflen, 472 int *actlen) 473 { 474 usb_device_request_t req; 475 476 req.bmRequestType = UT_READ_VENDOR_DEVICE; 477 req.bRequest = reqno; 478 USETW(req.wValue, value); 479 USETW(req.wIndex, index); 480 USETW(req.wLength, (uint16_t)buflen); 481 482 return usbd_do_request_flags(sc->sc_udev, &req, buf, 483 USBD_SHORT_XFER_OK, actlen, 484 USBD_DEFAULT_TIMEOUT); 485 } 486 487 static __inline usbd_status 488 write_reg(struct uchcom_softc *sc, 489 uint8_t reg1, uint8_t val1, uint8_t reg2, uint8_t val2) 490 { 491 DPRINTF(("uchcom: write reg 0x%02X<-0x%02X, 0x%02X<-0x%02X\n", 492 (unsigned)reg1, (unsigned)val1, 493 (unsigned)reg2, (unsigned)val2)); 494 return generic_control_out( 495 sc, UCHCOM_REQ_WRITE_REG, 496 reg1|((uint16_t)reg2<<8), val1|((uint16_t)val2<<8)); 497 } 498 499 static __inline usbd_status 500 read_reg(struct uchcom_softc *sc, 501 uint8_t reg1, uint8_t *rval1, uint8_t reg2, uint8_t *rval2) 502 { 503 uint8_t buf[UCHCOM_INPUT_BUF_SIZE]; 504 usbd_status err; 505 int actin; 506 507 err = generic_control_in( 508 sc, UCHCOM_REQ_READ_REG, 509 reg1|((uint16_t)reg2<<8), 0, buf, sizeof buf, &actin); 510 if (err) 511 return err; 512 513 DPRINTF(("uchcom: read reg 0x%02X->0x%02X, 0x%02X->0x%02X\n", 514 (unsigned)reg1, (unsigned)buf[0], 515 (unsigned)reg2, (unsigned)buf[1])); 516 517 if (rval1) *rval1 = buf[0]; 518 if (rval2) *rval2 = buf[1]; 519 520 return USBD_NORMAL_COMPLETION; 521 } 522 523 static __inline usbd_status 524 get_version(struct uchcom_softc *sc, uint8_t *rver) 525 { 526 uint8_t buf[UCHCOM_INPUT_BUF_SIZE]; 527 usbd_status err; 528 int actin; 529 530 err = generic_control_in( 531 sc, UCHCOM_REQ_GET_VERSION, 0, 0, buf, sizeof buf, &actin); 532 if (err) 533 return err; 534 535 if (rver) *rver = buf[0]; 536 537 return USBD_NORMAL_COMPLETION; 538 } 539 540 static __inline usbd_status 541 get_status(struct uchcom_softc *sc, uint8_t *rval) 542 { 543 return read_reg(sc, UCHCOM_REG_STAT1, rval, UCHCOM_REG_STAT2, NULL); 544 } 545 546 static __inline usbd_status 547 set_dtrrts_10(struct uchcom_softc *sc, uint8_t val) 548 { 549 return write_reg(sc, UCHCOM_REG_STAT1, val, UCHCOM_REG_STAT1, val); 550 } 551 552 static __inline usbd_status 553 set_dtrrts_20(struct uchcom_softc *sc, uint8_t val) 554 { 555 return generic_control_out(sc, UCHCOM_REQ_SET_DTRRTS, val, 0); 556 } 557 558 559 /* ---------------------------------------------------------------------- 560 * middle layer 561 */ 562 563 static int 564 update_version(struct uchcom_softc *sc) 565 { 566 usbd_status err; 567 568 err = get_version(sc, &sc->sc_version); 569 if (err) { 570 aprint_error_dev(sc->sc_dev, "cannot get version: %s\n", 571 usbd_errstr(err)); 572 return EIO; 573 } 574 575 return 0; 576 } 577 578 static void 579 convert_status(struct uchcom_softc *sc, uint8_t cur) 580 { 581 sc->sc_dtr = !(cur & UCHCOM_DTR_MASK); 582 sc->sc_rts = !(cur & UCHCOM_RTS_MASK); 583 584 cur = ~cur & 0x0F; 585 sc->sc_msr = (cur << 4) | ((sc->sc_msr >> 4) ^ cur); 586 } 587 588 static int 589 update_status(struct uchcom_softc *sc) 590 { 591 usbd_status err; 592 uint8_t cur; 593 594 err = get_status(sc, &cur); 595 if (err) { 596 aprint_error_dev(sc->sc_dev, 597 "cannot update status: %s\n", usbd_errstr(err)); 598 return EIO; 599 } 600 convert_status(sc, cur); 601 602 return 0; 603 } 604 605 606 static int 607 set_dtrrts(struct uchcom_softc *sc, int dtr, int rts) 608 { 609 usbd_status err; 610 uint8_t val = 0; 611 612 if (dtr) val |= UCHCOM_DTR_MASK; 613 if (rts) val |= UCHCOM_RTS_MASK; 614 615 if (sc->sc_version < UCHCOM_VER_20) 616 err = set_dtrrts_10(sc, ~val); 617 else 618 err = set_dtrrts_20(sc, ~val); 619 620 if (err) { 621 aprint_error_dev(sc->sc_dev, "cannot set DTR/RTS: %s\n", 622 usbd_errstr(err)); 623 return EIO; 624 } 625 626 return 0; 627 } 628 629 static int 630 set_break(struct uchcom_softc *sc, int onoff) 631 { 632 usbd_status err; 633 uint8_t brk1, brk2; 634 635 err = read_reg(sc, UCHCOM_REG_BREAK1, &brk1, UCHCOM_REG_BREAK2, &brk2); 636 if (err) 637 return EIO; 638 if (onoff) { 639 /* on - clear bits */ 640 brk1 &= ~UCHCOM_BRK1_MASK; 641 brk2 &= ~UCHCOM_BRK2_MASK; 642 } else { 643 /* off - set bits */ 644 brk1 |= UCHCOM_BRK1_MASK; 645 brk2 |= UCHCOM_BRK2_MASK; 646 } 647 err = write_reg(sc, UCHCOM_REG_BREAK1, brk1, UCHCOM_REG_BREAK2, brk2); 648 if (err) 649 return EIO; 650 651 return 0; 652 } 653 654 static int 655 calc_divider_settings(struct uchcom_divider *dp, uint32_t rate) 656 { 657 int i; 658 const struct uchcom_divider_record *rp; 659 uint32_t div, rem, mod; 660 661 /* find record */ 662 for (i=0; i<NUM_DIVIDERS; i++) { 663 if (dividers[i].dvr_high >= rate && 664 dividers[i].dvr_low <= rate) { 665 rp = ÷rs[i]; 666 goto found; 667 } 668 } 669 return -1; 670 671 found: 672 dp->dv_prescaler = rp->dvr_divider.dv_prescaler; 673 if (rp->dvr_base_clock == UCHCOM_BASE_UNKNOWN) 674 dp->dv_div = rp->dvr_divider.dv_div; 675 else { 676 div = rp->dvr_base_clock / rate; 677 rem = rp->dvr_base_clock % rate; 678 if (div==0 || div>=0xFF) 679 return -1; 680 if ((rem<<1) >= rate) 681 div += 1; 682 dp->dv_div = (uint8_t)-div; 683 } 684 685 mod = UCHCOM_BPS_MOD_BASE/rate + UCHCOM_BPS_MOD_BASE_OFS; 686 mod = mod + mod/2; 687 688 dp->dv_mod = mod / 0x100; 689 690 return 0; 691 } 692 693 static int 694 set_dte_rate(struct uchcom_softc *sc, uint32_t rate) 695 { 696 usbd_status err; 697 struct uchcom_divider dv; 698 699 if (calc_divider_settings(&dv, rate)) 700 return EINVAL; 701 702 if ((err = write_reg(sc, 703 UCHCOM_REG_BPS_PRE, dv.dv_prescaler, 704 UCHCOM_REG_BPS_DIV, dv.dv_div)) || 705 (err = write_reg(sc, 706 UCHCOM_REG_BPS_MOD, dv.dv_mod, 707 UCHCOM_REG_BPS_PAD, 0))) { 708 aprint_error_dev(sc->sc_dev, "cannot set DTE rate: %s\n", 709 usbd_errstr(err)); 710 return EIO; 711 } 712 713 return 0; 714 } 715 716 static int 717 set_line_control(struct uchcom_softc *sc, tcflag_t cflag) 718 { 719 usbd_status err; 720 uint8_t lcr1val = 0, lcr2val = 0; 721 722 err = read_reg(sc, UCHCOM_REG_LCR1, &lcr1val, UCHCOM_REG_LCR2, &lcr2val); 723 if (err) { 724 aprint_error_dev(sc->sc_dev, "cannot get LCR: %s\n", 725 usbd_errstr(err)); 726 return EIO; 727 } 728 729 lcr1val &= ~UCHCOM_LCR1_MASK; 730 lcr2val &= ~UCHCOM_LCR2_MASK; 731 732 /* 733 * XXX: it is difficult to handle the line control appropriately: 734 * - CS8, !CSTOPB and any parity mode seems ok, but 735 * - the chip doesn't have the function to calculate parity 736 * in !CS8 mode. 737 * - it is unclear that the chip supports CS5,6 mode. 738 * - it is unclear how to handle stop bits. 739 */ 740 741 switch (ISSET(cflag, CSIZE)) { 742 case CS5: 743 case CS6: 744 case CS7: 745 return EINVAL; 746 case CS8: 747 break; 748 } 749 750 if (ISSET(cflag, PARENB)) { 751 lcr1val |= UCHCOM_LCR1_PARENB; 752 if (ISSET(cflag, PARODD)) 753 lcr2val |= UCHCOM_LCR2_PARODD; 754 else 755 lcr2val |= UCHCOM_LCR2_PAREVEN; 756 } 757 758 err = write_reg(sc, UCHCOM_REG_LCR1, lcr1val, UCHCOM_REG_LCR2, lcr2val); 759 if (err) { 760 aprint_error_dev(sc->sc_dev, "cannot set LCR: %s\n", 761 usbd_errstr(err)); 762 return EIO; 763 } 764 765 return 0; 766 } 767 768 static int 769 clear_chip(struct uchcom_softc *sc) 770 { 771 usbd_status err; 772 773 DPRINTF(("%s: clear\n", device_xname(sc->sc_dev))); 774 err = generic_control_out(sc, UCHCOM_REQ_RESET, 0, 0); 775 if (err) { 776 aprint_error_dev(sc->sc_dev, "cannot clear: %s\n", 777 usbd_errstr(err)); 778 return EIO; 779 } 780 781 return 0; 782 } 783 784 static int 785 reset_chip(struct uchcom_softc *sc) 786 { 787 usbd_status err; 788 uint8_t lcr1val, lcr2val, pre, div, mod; 789 uint16_t val=0, idx=0; 790 791 err = read_reg(sc, UCHCOM_REG_LCR1, &lcr1val, UCHCOM_REG_LCR2, &lcr2val); 792 if (err) 793 goto failed; 794 795 err = read_reg(sc, UCHCOM_REG_BPS_PRE, &pre, UCHCOM_REG_BPS_DIV, &div); 796 if (err) 797 goto failed; 798 799 err = read_reg(sc, UCHCOM_REG_BPS_MOD, &mod, UCHCOM_REG_BPS_PAD, NULL); 800 if (err) 801 goto failed; 802 803 val |= (uint16_t)(lcr1val&0xF0) << 8; 804 val |= 0x01; 805 val |= (uint16_t)(lcr2val&0x0F) << 8; 806 val |= 0x02; 807 idx |= pre & 0x07; 808 val |= 0x04; 809 idx |= (uint16_t)div << 8; 810 val |= 0x08; 811 idx |= mod & 0xF8; 812 val |= 0x10; 813 814 DPRINTF(("%s: reset v=0x%04X, i=0x%04X\n", 815 device_xname(sc->sc_dev), val, idx)); 816 817 err = generic_control_out(sc, UCHCOM_REQ_RESET, val, idx); 818 if (err) 819 goto failed; 820 821 return 0; 822 823 failed: 824 printf("%s: cannot reset: %s\n", 825 device_xname(sc->sc_dev), usbd_errstr(err)); 826 return EIO; 827 } 828 829 static int 830 setup_comm(struct uchcom_softc *sc) 831 { 832 int ret; 833 834 ret = update_version(sc); 835 if (ret) 836 return ret; 837 838 ret = clear_chip(sc); 839 if (ret) 840 return ret; 841 842 ret = set_dte_rate(sc, TTYDEF_SPEED); 843 if (ret) 844 return ret; 845 846 ret = set_line_control(sc, CS8); 847 if (ret) 848 return ret; 849 850 ret = update_status(sc); 851 if (ret) 852 return ret; 853 854 ret = reset_chip(sc); 855 if (ret) 856 return ret; 857 858 ret = set_dte_rate(sc, TTYDEF_SPEED); /* XXX */ 859 if (ret) 860 return ret; 861 862 sc->sc_dtr = sc->sc_rts = 1; 863 ret = set_dtrrts(sc, sc->sc_dtr, sc->sc_rts); 864 if (ret) 865 return ret; 866 867 return 0; 868 } 869 870 static int 871 setup_intr_pipe(struct uchcom_softc *sc) 872 { 873 usbd_status err; 874 875 if (sc->sc_intr_endpoint != -1 && sc->sc_intr_pipe == NULL) { 876 sc->sc_intr_buf = malloc(sc->sc_intr_size, M_USBDEV, M_WAITOK); 877 err = usbd_open_pipe_intr(sc->sc_iface, 878 sc->sc_intr_endpoint, 879 USBD_SHORT_XFER_OK, 880 &sc->sc_intr_pipe, sc, 881 sc->sc_intr_buf, 882 sc->sc_intr_size, 883 uchcom_intr, USBD_DEFAULT_INTERVAL); 884 if (err) { 885 aprint_error_dev(sc->sc_dev, 886 "cannot open interrupt pipe: %s\n", 887 usbd_errstr(err)); 888 return EIO; 889 } 890 } 891 return 0; 892 } 893 894 static void 895 close_intr_pipe(struct uchcom_softc *sc) 896 { 897 usbd_status err; 898 899 if (sc->sc_dying) 900 return; 901 902 if (sc->sc_intr_pipe != NULL) { 903 err = usbd_abort_pipe(sc->sc_intr_pipe); 904 if (err) 905 aprint_error_dev(sc->sc_dev, 906 "abort interrupt pipe failed: %s\n", 907 usbd_errstr(err)); 908 err = usbd_close_pipe(sc->sc_intr_pipe); 909 if (err) 910 aprint_error_dev(sc->sc_dev, 911 "close interrupt pipe failed: %s\n", 912 usbd_errstr(err)); 913 free(sc->sc_intr_buf, M_USBDEV); 914 sc->sc_intr_pipe = NULL; 915 } 916 } 917 918 919 /* ---------------------------------------------------------------------- 920 * methods for ucom 921 */ 922 void 923 uchcom_get_status(void *arg, int portno, u_char *rlsr, u_char *rmsr) 924 { 925 struct uchcom_softc *sc = arg; 926 927 if (sc->sc_dying) 928 return; 929 930 *rlsr = sc->sc_lsr; 931 *rmsr = sc->sc_msr; 932 } 933 934 void 935 uchcom_set(void *arg, int portno, int reg, int onoff) 936 { 937 struct uchcom_softc *sc = arg; 938 939 if (sc->sc_dying) 940 return; 941 942 switch (reg) { 943 case UCOM_SET_DTR: 944 sc->sc_dtr = !!onoff; 945 set_dtrrts(sc, sc->sc_dtr, sc->sc_rts); 946 break; 947 case UCOM_SET_RTS: 948 sc->sc_rts = !!onoff; 949 set_dtrrts(sc, sc->sc_dtr, sc->sc_rts); 950 break; 951 case UCOM_SET_BREAK: 952 set_break(sc, onoff); 953 break; 954 } 955 } 956 957 int 958 uchcom_param(void *arg, int portno, struct termios *t) 959 { 960 struct uchcom_softc *sc = arg; 961 int ret; 962 963 if (sc->sc_dying) 964 return 0; 965 966 ret = set_line_control(sc, t->c_cflag); 967 if (ret) 968 return ret; 969 970 ret = set_dte_rate(sc, t->c_ospeed); 971 if (ret) 972 return ret; 973 974 return 0; 975 } 976 977 int 978 uchcom_open(void *arg, int portno) 979 { 980 int ret; 981 struct uchcom_softc *sc = arg; 982 983 if (sc->sc_dying) 984 return EIO; 985 986 ret = setup_intr_pipe(sc); 987 if (ret) 988 return ret; 989 990 ret = setup_comm(sc); 991 if (ret) 992 return ret; 993 994 return 0; 995 } 996 997 void 998 uchcom_close(void *arg, int portno) 999 { 1000 struct uchcom_softc *sc = arg; 1001 1002 if (sc->sc_dying) 1003 return; 1004 1005 close_intr_pipe(sc); 1006 } 1007 1008 1009 /* ---------------------------------------------------------------------- 1010 * callback when the modem status is changed. 1011 */ 1012 void 1013 uchcom_intr(usbd_xfer_handle xfer, usbd_private_handle priv, 1014 usbd_status status) 1015 { 1016 struct uchcom_softc *sc = priv; 1017 u_char *buf = sc->sc_intr_buf; 1018 1019 if (sc->sc_dying) 1020 return; 1021 1022 if (status != USBD_NORMAL_COMPLETION) { 1023 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) 1024 return; 1025 1026 DPRINTF(("%s: abnormal status: %s\n", 1027 device_xname(sc->sc_dev), usbd_errstr(status))); 1028 usbd_clear_endpoint_stall_async(sc->sc_intr_pipe); 1029 return; 1030 } 1031 DPRINTF(("%s: intr: 0x%02X 0x%02X 0x%02X 0x%02X " 1032 "0x%02X 0x%02X 0x%02X 0x%02X\n", 1033 device_xname(sc->sc_dev), 1034 (unsigned)buf[0], (unsigned)buf[1], 1035 (unsigned)buf[2], (unsigned)buf[3], 1036 (unsigned)buf[4], (unsigned)buf[5], 1037 (unsigned)buf[6], (unsigned)buf[7])); 1038 1039 convert_status(sc, buf[UCHCOM_INTR_STAT1]); 1040 ucom_status_change(device_private(sc->sc_subdev)); 1041 } 1042