1 /* $NetBSD: ohci.c,v 1.208 2010/06/09 13:33:13 pgoyette Exp $ */ 2 /* $FreeBSD: src/sys/dev/usb/ohci.c,v 1.22 1999/11/17 22:33:40 n_hibma Exp $ */ 3 4 /* 5 * Copyright (c) 1998, 2004, 2005 The NetBSD Foundation, Inc. 6 * All rights reserved. 7 * 8 * This code is derived from software contributed to The NetBSD Foundation 9 * by Lennart Augustsson (lennart@augustsson.net) at 10 * Carlstedt Research & Technology. 11 * This code is derived from software contributed to The NetBSD Foundation 12 * by Charles M. Hannum. 13 * 14 * Redistribution and use in source and binary forms, with or without 15 * modification, are permitted provided that the following conditions 16 * are met: 17 * 1. Redistributions of source code must retain the above copyright 18 * notice, this list of conditions and the following disclaimer. 19 * 2. Redistributions in binary form must reproduce the above copyright 20 * notice, this list of conditions and the following disclaimer in the 21 * documentation and/or other materials provided with the distribution. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 24 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 25 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 26 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 27 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 28 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 29 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 30 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 31 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 32 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 33 * POSSIBILITY OF SUCH DAMAGE. 34 */ 35 36 /* 37 * USB Open Host Controller driver. 38 * 39 * OHCI spec: http://www.compaq.com/productinfo/development/openhci.html 40 * USB spec: http://www.usb.org/developers/docs/ 41 */ 42 43 #include <sys/cdefs.h> 44 __KERNEL_RCSID(0, "$NetBSD: ohci.c,v 1.208 2010/06/09 13:33:13 pgoyette Exp $"); 45 46 #include <sys/param.h> 47 #include <sys/systm.h> 48 #include <sys/malloc.h> 49 #include <sys/kernel.h> 50 #include <sys/device.h> 51 #include <sys/select.h> 52 #include <uvm/uvm_extern.h> 53 #include <sys/proc.h> 54 #include <sys/queue.h> 55 56 #include <sys/bus.h> 57 #include <machine/endian.h> 58 59 #include <dev/usb/usb.h> 60 #include <dev/usb/usbdi.h> 61 #include <dev/usb/usbdivar.h> 62 #include <dev/usb/usb_mem.h> 63 #include <dev/usb/usb_quirks.h> 64 65 #include <dev/usb/ohcireg.h> 66 #include <dev/usb/ohcivar.h> 67 #include <dev/usb/usbroothub_subr.h> 68 69 70 71 #ifdef OHCI_DEBUG 72 #define DPRINTF(x) if (ohcidebug) logprintf x 73 #define DPRINTFN(n,x) if (ohcidebug>(n)) logprintf x 74 int ohcidebug = 0; 75 #else 76 #define DPRINTF(x) 77 #define DPRINTFN(n,x) 78 #endif 79 80 #if BYTE_ORDER == BIG_ENDIAN 81 #define SWAP_ENDIAN OHCI_LITTLE_ENDIAN 82 #else 83 #define SWAP_ENDIAN OHCI_BIG_ENDIAN 84 #endif 85 86 #define O16TOH(val) (sc->sc_endian == SWAP_ENDIAN ? bswap16(val) : val) 87 #define O32TOH(val) (sc->sc_endian == SWAP_ENDIAN ? bswap32(val) : val) 88 #define HTOO16(val) O16TOH(val) 89 #define HTOO32(val) O32TOH(val) 90 91 struct ohci_pipe; 92 93 Static ohci_soft_ed_t *ohci_alloc_sed(ohci_softc_t *); 94 Static void ohci_free_sed(ohci_softc_t *, ohci_soft_ed_t *); 95 96 Static ohci_soft_td_t *ohci_alloc_std(ohci_softc_t *); 97 Static void ohci_free_std(ohci_softc_t *, ohci_soft_td_t *); 98 99 Static ohci_soft_itd_t *ohci_alloc_sitd(ohci_softc_t *); 100 Static void ohci_free_sitd(ohci_softc_t *,ohci_soft_itd_t *); 101 102 #if 0 103 Static void ohci_free_std_chain(ohci_softc_t *, ohci_soft_td_t *, 104 ohci_soft_td_t *); 105 #endif 106 Static usbd_status ohci_alloc_std_chain(struct ohci_pipe *, 107 ohci_softc_t *, int, int, usbd_xfer_handle, 108 ohci_soft_td_t *, ohci_soft_td_t **); 109 110 Static usbd_status ohci_open(usbd_pipe_handle); 111 Static void ohci_poll(struct usbd_bus *); 112 Static void ohci_softintr(void *); 113 Static void ohci_waitintr(ohci_softc_t *, usbd_xfer_handle); 114 Static void ohci_rhsc(ohci_softc_t *, usbd_xfer_handle); 115 116 Static usbd_status ohci_device_request(usbd_xfer_handle xfer); 117 Static void ohci_add_ed(ohci_softc_t *, ohci_soft_ed_t *, 118 ohci_soft_ed_t *); 119 120 Static void ohci_rem_ed(ohci_soft_ed_t *, ohci_soft_ed_t *); 121 Static void ohci_hash_add_td(ohci_softc_t *, ohci_soft_td_t *); 122 Static void ohci_hash_rem_td(ohci_softc_t *, ohci_soft_td_t *); 123 Static ohci_soft_td_t *ohci_hash_find_td(ohci_softc_t *, ohci_physaddr_t); 124 Static void ohci_hash_add_itd(ohci_softc_t *, ohci_soft_itd_t *); 125 Static void ohci_hash_rem_itd(ohci_softc_t *, ohci_soft_itd_t *); 126 Static ohci_soft_itd_t *ohci_hash_find_itd(ohci_softc_t *, ohci_physaddr_t); 127 128 Static usbd_status ohci_setup_isoc(usbd_pipe_handle pipe); 129 Static void ohci_device_isoc_enter(usbd_xfer_handle); 130 131 Static usbd_status ohci_allocm(struct usbd_bus *, usb_dma_t *, u_int32_t); 132 Static void ohci_freem(struct usbd_bus *, usb_dma_t *); 133 134 Static usbd_xfer_handle ohci_allocx(struct usbd_bus *); 135 Static void ohci_freex(struct usbd_bus *, usbd_xfer_handle); 136 137 Static usbd_status ohci_root_ctrl_transfer(usbd_xfer_handle); 138 Static usbd_status ohci_root_ctrl_start(usbd_xfer_handle); 139 Static void ohci_root_ctrl_abort(usbd_xfer_handle); 140 Static void ohci_root_ctrl_close(usbd_pipe_handle); 141 Static void ohci_root_ctrl_done(usbd_xfer_handle); 142 143 Static usbd_status ohci_root_intr_transfer(usbd_xfer_handle); 144 Static usbd_status ohci_root_intr_start(usbd_xfer_handle); 145 Static void ohci_root_intr_abort(usbd_xfer_handle); 146 Static void ohci_root_intr_close(usbd_pipe_handle); 147 Static void ohci_root_intr_done(usbd_xfer_handle); 148 149 Static usbd_status ohci_device_ctrl_transfer(usbd_xfer_handle); 150 Static usbd_status ohci_device_ctrl_start(usbd_xfer_handle); 151 Static void ohci_device_ctrl_abort(usbd_xfer_handle); 152 Static void ohci_device_ctrl_close(usbd_pipe_handle); 153 Static void ohci_device_ctrl_done(usbd_xfer_handle); 154 155 Static usbd_status ohci_device_bulk_transfer(usbd_xfer_handle); 156 Static usbd_status ohci_device_bulk_start(usbd_xfer_handle); 157 Static void ohci_device_bulk_abort(usbd_xfer_handle); 158 Static void ohci_device_bulk_close(usbd_pipe_handle); 159 Static void ohci_device_bulk_done(usbd_xfer_handle); 160 161 Static usbd_status ohci_device_intr_transfer(usbd_xfer_handle); 162 Static usbd_status ohci_device_intr_start(usbd_xfer_handle); 163 Static void ohci_device_intr_abort(usbd_xfer_handle); 164 Static void ohci_device_intr_close(usbd_pipe_handle); 165 Static void ohci_device_intr_done(usbd_xfer_handle); 166 167 Static usbd_status ohci_device_isoc_transfer(usbd_xfer_handle); 168 Static usbd_status ohci_device_isoc_start(usbd_xfer_handle); 169 Static void ohci_device_isoc_abort(usbd_xfer_handle); 170 Static void ohci_device_isoc_close(usbd_pipe_handle); 171 Static void ohci_device_isoc_done(usbd_xfer_handle); 172 173 Static usbd_status ohci_device_setintr(ohci_softc_t *sc, 174 struct ohci_pipe *pipe, int ival); 175 176 Static void ohci_timeout(void *); 177 Static void ohci_timeout_task(void *); 178 Static void ohci_rhsc_enable(void *); 179 180 Static void ohci_close_pipe(usbd_pipe_handle, ohci_soft_ed_t *); 181 Static void ohci_abort_xfer(usbd_xfer_handle, usbd_status); 182 183 Static void ohci_device_clear_toggle(usbd_pipe_handle pipe); 184 Static void ohci_noop(usbd_pipe_handle pipe); 185 186 #ifdef OHCI_DEBUG 187 Static void ohci_dumpregs(ohci_softc_t *); 188 Static void ohci_dump_tds(ohci_softc_t *, ohci_soft_td_t *); 189 Static void ohci_dump_td(ohci_softc_t *, ohci_soft_td_t *); 190 Static void ohci_dump_ed(ohci_softc_t *, ohci_soft_ed_t *); 191 Static void ohci_dump_itd(ohci_softc_t *, ohci_soft_itd_t *); 192 Static void ohci_dump_itds(ohci_softc_t *, ohci_soft_itd_t *); 193 #endif 194 195 #define OBARR(sc) bus_space_barrier((sc)->iot, (sc)->ioh, 0, (sc)->sc_size, \ 196 BUS_SPACE_BARRIER_READ|BUS_SPACE_BARRIER_WRITE) 197 #define OWRITE1(sc, r, x) \ 198 do { OBARR(sc); bus_space_write_1((sc)->iot, (sc)->ioh, (r), (x)); } while (0) 199 #define OWRITE2(sc, r, x) \ 200 do { OBARR(sc); bus_space_write_2((sc)->iot, (sc)->ioh, (r), (x)); } while (0) 201 #define OWRITE4(sc, r, x) \ 202 do { OBARR(sc); bus_space_write_4((sc)->iot, (sc)->ioh, (r), (x)); } while (0) 203 static __inline uint8_t 204 OREAD1(ohci_softc_t *sc, bus_size_t r) 205 { 206 207 OBARR(sc); 208 return bus_space_read_1(sc->iot, sc->ioh, r); 209 } 210 211 static __inline uint16_t 212 OREAD2(ohci_softc_t *sc, bus_size_t r) 213 { 214 215 OBARR(sc); 216 return bus_space_read_2(sc->iot, sc->ioh, r); 217 } 218 219 static __inline uint32_t 220 OREAD4(ohci_softc_t *sc, bus_size_t r) 221 { 222 223 OBARR(sc); 224 return bus_space_read_4(sc->iot, sc->ioh, r); 225 } 226 227 /* Reverse the bits in a value 0 .. 31 */ 228 Static u_int8_t revbits[OHCI_NO_INTRS] = 229 { 0x00, 0x10, 0x08, 0x18, 0x04, 0x14, 0x0c, 0x1c, 230 0x02, 0x12, 0x0a, 0x1a, 0x06, 0x16, 0x0e, 0x1e, 231 0x01, 0x11, 0x09, 0x19, 0x05, 0x15, 0x0d, 0x1d, 232 0x03, 0x13, 0x0b, 0x1b, 0x07, 0x17, 0x0f, 0x1f }; 233 234 struct ohci_pipe { 235 struct usbd_pipe pipe; 236 ohci_soft_ed_t *sed; 237 union { 238 ohci_soft_td_t *td; 239 ohci_soft_itd_t *itd; 240 } tail; 241 /* Info needed for different pipe kinds. */ 242 union { 243 /* Control pipe */ 244 struct { 245 usb_dma_t reqdma; 246 u_int length; 247 ohci_soft_td_t *setup, *data, *stat; 248 } ctl; 249 /* Interrupt pipe */ 250 struct { 251 int nslots; 252 int pos; 253 } intr; 254 /* Bulk pipe */ 255 struct { 256 u_int length; 257 int isread; 258 } bulk; 259 /* Iso pipe */ 260 struct iso { 261 int next, inuse; 262 } iso; 263 } u; 264 }; 265 266 #define OHCI_INTR_ENDPT 1 267 268 Static const struct usbd_bus_methods ohci_bus_methods = { 269 ohci_open, 270 ohci_softintr, 271 ohci_poll, 272 ohci_allocm, 273 ohci_freem, 274 ohci_allocx, 275 ohci_freex, 276 }; 277 278 Static const struct usbd_pipe_methods ohci_root_ctrl_methods = { 279 ohci_root_ctrl_transfer, 280 ohci_root_ctrl_start, 281 ohci_root_ctrl_abort, 282 ohci_root_ctrl_close, 283 ohci_noop, 284 ohci_root_ctrl_done, 285 }; 286 287 Static const struct usbd_pipe_methods ohci_root_intr_methods = { 288 ohci_root_intr_transfer, 289 ohci_root_intr_start, 290 ohci_root_intr_abort, 291 ohci_root_intr_close, 292 ohci_noop, 293 ohci_root_intr_done, 294 }; 295 296 Static const struct usbd_pipe_methods ohci_device_ctrl_methods = { 297 ohci_device_ctrl_transfer, 298 ohci_device_ctrl_start, 299 ohci_device_ctrl_abort, 300 ohci_device_ctrl_close, 301 ohci_noop, 302 ohci_device_ctrl_done, 303 }; 304 305 Static const struct usbd_pipe_methods ohci_device_intr_methods = { 306 ohci_device_intr_transfer, 307 ohci_device_intr_start, 308 ohci_device_intr_abort, 309 ohci_device_intr_close, 310 ohci_device_clear_toggle, 311 ohci_device_intr_done, 312 }; 313 314 Static const struct usbd_pipe_methods ohci_device_bulk_methods = { 315 ohci_device_bulk_transfer, 316 ohci_device_bulk_start, 317 ohci_device_bulk_abort, 318 ohci_device_bulk_close, 319 ohci_device_clear_toggle, 320 ohci_device_bulk_done, 321 }; 322 323 Static const struct usbd_pipe_methods ohci_device_isoc_methods = { 324 ohci_device_isoc_transfer, 325 ohci_device_isoc_start, 326 ohci_device_isoc_abort, 327 ohci_device_isoc_close, 328 ohci_noop, 329 ohci_device_isoc_done, 330 }; 331 332 int 333 ohci_activate(device_t self, enum devact act) 334 { 335 struct ohci_softc *sc = device_private(self); 336 337 switch (act) { 338 case DVACT_DEACTIVATE: 339 sc->sc_dying = 1; 340 return 0; 341 default: 342 return EOPNOTSUPP; 343 } 344 } 345 346 void 347 ohci_childdet(device_t self, device_t child) 348 { 349 struct ohci_softc *sc = device_private(self); 350 351 KASSERT(sc->sc_child == child); 352 sc->sc_child = NULL; 353 } 354 355 int 356 ohci_detach(struct ohci_softc *sc, int flags) 357 { 358 int rv = 0; 359 usbd_xfer_handle xfer; 360 361 if (sc->sc_child != NULL) 362 rv = config_detach(sc->sc_child, flags); 363 364 if (rv != 0) 365 return (rv); 366 367 usb_uncallout(sc->sc_tmo_rhsc, ohci_rhsc_enable, sc); 368 369 usb_delay_ms(&sc->sc_bus, 300); /* XXX let stray task complete */ 370 usb_callout_destroy(sc->sc_tmo_rhsc); 371 372 if (sc->sc_hcca != NULL) 373 usb_freemem(&sc->sc_bus, &sc->sc_hccadma); 374 while((xfer = SIMPLEQ_FIRST(&sc->sc_free_xfers)) != NULL) { 375 SIMPLEQ_REMOVE_HEAD(&sc->sc_free_xfers, next); 376 free(xfer, M_USB); 377 } 378 379 return (rv); 380 } 381 382 ohci_soft_ed_t * 383 ohci_alloc_sed(ohci_softc_t *sc) 384 { 385 ohci_soft_ed_t *sed; 386 usbd_status err; 387 int i, offs; 388 usb_dma_t dma; 389 390 if (sc->sc_freeeds == NULL) { 391 DPRINTFN(2, ("ohci_alloc_sed: allocating chunk\n")); 392 err = usb_allocmem(&sc->sc_bus, OHCI_SED_SIZE * OHCI_SED_CHUNK, 393 OHCI_ED_ALIGN, &dma); 394 if (err) 395 return (0); 396 for(i = 0; i < OHCI_SED_CHUNK; i++) { 397 offs = i * OHCI_SED_SIZE; 398 sed = KERNADDR(&dma, offs); 399 sed->physaddr = DMAADDR(&dma, offs); 400 sed->dma = dma; 401 sed->offs = offs; 402 sed->next = sc->sc_freeeds; 403 sc->sc_freeeds = sed; 404 } 405 } 406 sed = sc->sc_freeeds; 407 sc->sc_freeeds = sed->next; 408 memset(&sed->ed, 0, sizeof(ohci_ed_t)); 409 sed->next = 0; 410 return (sed); 411 } 412 413 void 414 ohci_free_sed(ohci_softc_t *sc, ohci_soft_ed_t *sed) 415 { 416 sed->next = sc->sc_freeeds; 417 sc->sc_freeeds = sed; 418 } 419 420 ohci_soft_td_t * 421 ohci_alloc_std(ohci_softc_t *sc) 422 { 423 ohci_soft_td_t *std; 424 usbd_status err; 425 int i, offs; 426 usb_dma_t dma; 427 int s; 428 429 if (sc->sc_freetds == NULL) { 430 DPRINTFN(2, ("ohci_alloc_std: allocating chunk\n")); 431 err = usb_allocmem(&sc->sc_bus, OHCI_STD_SIZE * OHCI_STD_CHUNK, 432 OHCI_TD_ALIGN, &dma); 433 if (err) 434 return (NULL); 435 s = splusb(); 436 for(i = 0; i < OHCI_STD_CHUNK; i++) { 437 offs = i * OHCI_STD_SIZE; 438 std = KERNADDR(&dma, offs); 439 std->physaddr = DMAADDR(&dma, offs); 440 std->dma = dma; 441 std->offs = offs; 442 std->nexttd = sc->sc_freetds; 443 sc->sc_freetds = std; 444 } 445 splx(s); 446 } 447 448 s = splusb(); 449 std = sc->sc_freetds; 450 sc->sc_freetds = std->nexttd; 451 memset(&std->td, 0, sizeof(ohci_td_t)); 452 std->nexttd = NULL; 453 std->xfer = NULL; 454 ohci_hash_add_td(sc, std); 455 splx(s); 456 457 return (std); 458 } 459 460 void 461 ohci_free_std(ohci_softc_t *sc, ohci_soft_td_t *std) 462 { 463 int s; 464 465 s = splusb(); 466 ohci_hash_rem_td(sc, std); 467 std->nexttd = sc->sc_freetds; 468 sc->sc_freetds = std; 469 splx(s); 470 } 471 472 usbd_status 473 ohci_alloc_std_chain(struct ohci_pipe *opipe, ohci_softc_t *sc, 474 int alen, int rd, usbd_xfer_handle xfer, 475 ohci_soft_td_t *sp, ohci_soft_td_t **ep) 476 { 477 ohci_soft_td_t *next, *cur; 478 ohci_physaddr_t dataphys, dataphysend; 479 u_int32_t tdflags; 480 int len, curlen; 481 usb_dma_t *dma = &xfer->dmabuf; 482 u_int16_t flags = xfer->flags; 483 484 DPRINTFN(alen < 4096,("ohci_alloc_std_chain: start len=%d\n", alen)); 485 486 len = alen; 487 cur = sp; 488 dataphys = DMAADDR(dma, 0); 489 dataphysend = OHCI_PAGE(dataphys + len - 1); 490 usb_syncmem(dma, 0, len, 491 rd ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); 492 tdflags = HTOO32( 493 (rd ? OHCI_TD_IN : OHCI_TD_OUT) | 494 (flags & USBD_SHORT_XFER_OK ? OHCI_TD_R : 0) | 495 OHCI_TD_NOCC | OHCI_TD_TOGGLE_CARRY | OHCI_TD_NOINTR); 496 497 for (;;) { 498 next = ohci_alloc_std(sc); 499 if (next == NULL) 500 goto nomem; 501 502 /* The OHCI hardware can handle at most one page crossing. */ 503 if (OHCI_PAGE(dataphys) == dataphysend || 504 OHCI_PAGE(dataphys) + OHCI_PAGE_SIZE == dataphysend) { 505 /* we can handle it in this TD */ 506 curlen = len; 507 } else { 508 /* must use multiple TDs, fill as much as possible. */ 509 curlen = 2 * OHCI_PAGE_SIZE - 510 (dataphys & (OHCI_PAGE_SIZE-1)); 511 /* the length must be a multiple of the max size */ 512 curlen -= curlen % UGETW(opipe->pipe.endpoint->edesc->wMaxPacketSize); 513 #ifdef DIAGNOSTIC 514 if (curlen == 0) 515 panic("ohci_alloc_std: curlen == 0"); 516 #endif 517 } 518 DPRINTFN(4,("ohci_alloc_std_chain: dataphys=0x%08x " 519 "dataphysend=0x%08x len=%d curlen=%d\n", 520 dataphys, dataphysend, 521 len, curlen)); 522 len -= curlen; 523 524 cur->td.td_flags = tdflags; 525 cur->td.td_cbp = HTOO32(dataphys); 526 cur->nexttd = next; 527 cur->td.td_nexttd = HTOO32(next->physaddr); 528 cur->td.td_be = HTOO32(dataphys + curlen - 1); 529 cur->len = curlen; 530 cur->flags = OHCI_ADD_LEN; 531 cur->xfer = xfer; 532 usb_syncmem(&cur->dma, cur->offs, sizeof(cur->td), 533 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 534 DPRINTFN(10,("ohci_alloc_std_chain: cbp=0x%08x be=0x%08x\n", 535 dataphys, dataphys + curlen - 1)); 536 if (len == 0) 537 break; 538 DPRINTFN(10,("ohci_alloc_std_chain: extend chain\n")); 539 dataphys += curlen; 540 cur = next; 541 } 542 if (!rd && (flags & USBD_FORCE_SHORT_XFER) && 543 alen % UGETW(opipe->pipe.endpoint->edesc->wMaxPacketSize) == 0) { 544 /* Force a 0 length transfer at the end. */ 545 546 cur = next; 547 next = ohci_alloc_std(sc); 548 if (next == NULL) 549 goto nomem; 550 551 cur->td.td_flags = tdflags; 552 cur->td.td_cbp = 0; /* indicate 0 length packet */ 553 cur->nexttd = next; 554 cur->td.td_nexttd = HTOO32(next->physaddr); 555 cur->td.td_be = ~0; 556 cur->len = 0; 557 cur->flags = 0; 558 cur->xfer = xfer; 559 usb_syncmem(&cur->dma, cur->offs, sizeof(cur->td), 560 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 561 DPRINTFN(2,("ohci_alloc_std_chain: add 0 xfer\n")); 562 } 563 *ep = cur; 564 565 return (USBD_NORMAL_COMPLETION); 566 567 nomem: 568 /* XXX free chain */ 569 return (USBD_NOMEM); 570 } 571 572 #if 0 573 Static void 574 ohci_free_std_chain(ohci_softc_t *sc, ohci_soft_td_t *std, 575 ohci_soft_td_t *stdend) 576 { 577 ohci_soft_td_t *p; 578 579 for (; std != stdend; std = p) { 580 p = std->nexttd; 581 ohci_free_std(sc, std); 582 } 583 } 584 #endif 585 586 ohci_soft_itd_t * 587 ohci_alloc_sitd(ohci_softc_t *sc) 588 { 589 ohci_soft_itd_t *sitd; 590 usbd_status err; 591 int i, s, offs; 592 usb_dma_t dma; 593 594 if (sc->sc_freeitds == NULL) { 595 DPRINTFN(2, ("ohci_alloc_sitd: allocating chunk\n")); 596 err = usb_allocmem(&sc->sc_bus, OHCI_SITD_SIZE * OHCI_SITD_CHUNK, 597 OHCI_ITD_ALIGN, &dma); 598 if (err) 599 return (NULL); 600 s = splusb(); 601 for(i = 0; i < OHCI_SITD_CHUNK; i++) { 602 offs = i * OHCI_SITD_SIZE; 603 sitd = KERNADDR(&dma, offs); 604 sitd->physaddr = DMAADDR(&dma, offs); 605 sitd->dma = dma; 606 sitd->offs = offs; 607 sitd->nextitd = sc->sc_freeitds; 608 sc->sc_freeitds = sitd; 609 } 610 splx(s); 611 } 612 613 s = splusb(); 614 sitd = sc->sc_freeitds; 615 sc->sc_freeitds = sitd->nextitd; 616 memset(&sitd->itd, 0, sizeof(ohci_itd_t)); 617 sitd->nextitd = NULL; 618 sitd->xfer = NULL; 619 ohci_hash_add_itd(sc, sitd); 620 splx(s); 621 622 #ifdef DIAGNOSTIC 623 sitd->isdone = 0; 624 #endif 625 626 return (sitd); 627 } 628 629 void 630 ohci_free_sitd(ohci_softc_t *sc, ohci_soft_itd_t *sitd) 631 { 632 int s; 633 634 DPRINTFN(10,("ohci_free_sitd: sitd=%p\n", sitd)); 635 636 #ifdef DIAGNOSTIC 637 if (!sitd->isdone) { 638 panic("ohci_free_sitd: sitd=%p not done", sitd); 639 return; 640 } 641 /* Warn double free */ 642 sitd->isdone = 0; 643 #endif 644 645 s = splusb(); 646 ohci_hash_rem_itd(sc, sitd); 647 sitd->nextitd = sc->sc_freeitds; 648 sc->sc_freeitds = sitd; 649 splx(s); 650 } 651 652 usbd_status 653 ohci_init(ohci_softc_t *sc) 654 { 655 ohci_soft_ed_t *sed, *psed; 656 usbd_status err; 657 int i; 658 u_int32_t s, ctl, rwc, ival, hcr, fm, per, rev, desca, descb; 659 660 DPRINTF(("ohci_init: start\n")); 661 aprint_normal_dev(sc->sc_dev, ""); 662 663 sc->sc_hcca = NULL; 664 usb_callout_init(sc->sc_tmo_rhsc); 665 666 for (i = 0; i < OHCI_HASH_SIZE; i++) 667 LIST_INIT(&sc->sc_hash_tds[i]); 668 for (i = 0; i < OHCI_HASH_SIZE; i++) 669 LIST_INIT(&sc->sc_hash_itds[i]); 670 671 SIMPLEQ_INIT(&sc->sc_free_xfers); 672 673 rev = OREAD4(sc, OHCI_REVISION); 674 aprint_normal("OHCI version %d.%d%s\n", 675 OHCI_REV_HI(rev), OHCI_REV_LO(rev), 676 OHCI_REV_LEGACY(rev) ? ", legacy support" : ""); 677 678 if (OHCI_REV_HI(rev) != 1 || OHCI_REV_LO(rev) != 0) { 679 aprint_error_dev(sc->sc_dev, "unsupported OHCI revision\n"); 680 sc->sc_bus.usbrev = USBREV_UNKNOWN; 681 return (USBD_INVAL); 682 } 683 sc->sc_bus.usbrev = USBREV_1_0; 684 685 usb_setup_reserve(sc->sc_dev, &sc->sc_dma_reserve, sc->sc_bus.dmatag, 686 USB_MEM_RESERVE); 687 688 /* XXX determine alignment by R/W */ 689 /* Allocate the HCCA area. */ 690 err = usb_allocmem(&sc->sc_bus, OHCI_HCCA_SIZE, 691 OHCI_HCCA_ALIGN, &sc->sc_hccadma); 692 if (err) { 693 sc->sc_hcca = NULL; 694 return err; 695 } 696 sc->sc_hcca = KERNADDR(&sc->sc_hccadma, 0); 697 memset(sc->sc_hcca, 0, OHCI_HCCA_SIZE); 698 699 sc->sc_eintrs = OHCI_NORMAL_INTRS; 700 701 /* Allocate dummy ED that starts the control list. */ 702 sc->sc_ctrl_head = ohci_alloc_sed(sc); 703 if (sc->sc_ctrl_head == NULL) { 704 err = USBD_NOMEM; 705 goto bad1; 706 } 707 sc->sc_ctrl_head->ed.ed_flags |= HTOO32(OHCI_ED_SKIP); 708 709 /* Allocate dummy ED that starts the bulk list. */ 710 sc->sc_bulk_head = ohci_alloc_sed(sc); 711 if (sc->sc_bulk_head == NULL) { 712 err = USBD_NOMEM; 713 goto bad2; 714 } 715 sc->sc_bulk_head->ed.ed_flags |= HTOO32(OHCI_ED_SKIP); 716 usb_syncmem(&sc->sc_bulk_head->dma, sc->sc_bulk_head->offs, 717 sizeof(sc->sc_bulk_head->ed), 718 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 719 720 /* Allocate dummy ED that starts the isochronous list. */ 721 sc->sc_isoc_head = ohci_alloc_sed(sc); 722 if (sc->sc_isoc_head == NULL) { 723 err = USBD_NOMEM; 724 goto bad3; 725 } 726 sc->sc_isoc_head->ed.ed_flags |= HTOO32(OHCI_ED_SKIP); 727 usb_syncmem(&sc->sc_isoc_head->dma, sc->sc_isoc_head->offs, 728 sizeof(sc->sc_isoc_head->ed), 729 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 730 731 /* Allocate all the dummy EDs that make up the interrupt tree. */ 732 for (i = 0; i < OHCI_NO_EDS; i++) { 733 sed = ohci_alloc_sed(sc); 734 if (sed == NULL) { 735 while (--i >= 0) 736 ohci_free_sed(sc, sc->sc_eds[i]); 737 err = USBD_NOMEM; 738 goto bad4; 739 } 740 /* All ED fields are set to 0. */ 741 sc->sc_eds[i] = sed; 742 sed->ed.ed_flags |= HTOO32(OHCI_ED_SKIP); 743 if (i != 0) 744 psed = sc->sc_eds[(i-1) / 2]; 745 else 746 psed= sc->sc_isoc_head; 747 sed->next = psed; 748 sed->ed.ed_nexted = HTOO32(psed->physaddr); 749 usb_syncmem(&sed->dma, sed->offs, sizeof(sed->ed), 750 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 751 } 752 /* 753 * Fill HCCA interrupt table. The bit reversal is to get 754 * the tree set up properly to spread the interrupts. 755 */ 756 for (i = 0; i < OHCI_NO_INTRS; i++) 757 sc->sc_hcca->hcca_interrupt_table[revbits[i]] = 758 HTOO32(sc->sc_eds[OHCI_NO_EDS-OHCI_NO_INTRS+i]->physaddr); 759 usb_syncmem(&sc->sc_hccadma, 0, OHCI_HCCA_SIZE, 760 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 761 762 #ifdef OHCI_DEBUG 763 if (ohcidebug > 15) { 764 for (i = 0; i < OHCI_NO_EDS; i++) { 765 printf("ed#%d ", i); 766 ohci_dump_ed(sc, sc->sc_eds[i]); 767 } 768 printf("iso "); 769 ohci_dump_ed(sc, sc->sc_isoc_head); 770 } 771 #endif 772 773 /* Preserve values programmed by SMM/BIOS but lost over reset. */ 774 ctl = OREAD4(sc, OHCI_CONTROL); 775 rwc = ctl & OHCI_RWC; 776 fm = OREAD4(sc, OHCI_FM_INTERVAL); 777 desca = OREAD4(sc, OHCI_RH_DESCRIPTOR_A); 778 descb = OREAD4(sc, OHCI_RH_DESCRIPTOR_B); 779 780 /* Determine in what context we are running. */ 781 if (ctl & OHCI_IR) { 782 /* SMM active, request change */ 783 DPRINTF(("ohci_init: SMM active, request owner change\n")); 784 if ((sc->sc_intre & (OHCI_OC | OHCI_MIE)) == 785 (OHCI_OC | OHCI_MIE)) 786 OWRITE4(sc, OHCI_INTERRUPT_ENABLE, OHCI_MIE); 787 s = OREAD4(sc, OHCI_COMMAND_STATUS); 788 OWRITE4(sc, OHCI_COMMAND_STATUS, s | OHCI_OCR); 789 for (i = 0; i < 100 && (ctl & OHCI_IR); i++) { 790 usb_delay_ms(&sc->sc_bus, 1); 791 ctl = OREAD4(sc, OHCI_CONTROL); 792 } 793 OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_MIE); 794 if ((ctl & OHCI_IR) == 0) { 795 aprint_error_dev(sc->sc_dev, 796 "SMM does not respond, resetting\n"); 797 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET | rwc); 798 goto reset; 799 } 800 #if 0 801 /* Don't bother trying to reuse the BIOS init, we'll reset it anyway. */ 802 } else if ((ctl & OHCI_HCFS_MASK) != OHCI_HCFS_RESET) { 803 /* BIOS started controller. */ 804 DPRINTF(("ohci_init: BIOS active\n")); 805 if ((ctl & OHCI_HCFS_MASK) != OHCI_HCFS_OPERATIONAL) { 806 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_OPERATIONAL | rwc); 807 usb_delay_ms(&sc->sc_bus, USB_RESUME_DELAY); 808 } 809 #endif 810 } else { 811 DPRINTF(("ohci_init: cold started\n")); 812 reset: 813 /* Controller was cold started. */ 814 usb_delay_ms(&sc->sc_bus, USB_BUS_RESET_DELAY); 815 } 816 817 /* 818 * This reset should not be necessary according to the OHCI spec, but 819 * without it some controllers do not start. 820 */ 821 DPRINTF(("%s: resetting\n", device_xname(sc->sc_dev))); 822 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET | rwc); 823 usb_delay_ms(&sc->sc_bus, USB_BUS_RESET_DELAY); 824 825 /* We now own the host controller and the bus has been reset. */ 826 827 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_HCR); /* Reset HC */ 828 /* Nominal time for a reset is 10 us. */ 829 for (i = 0; i < 10; i++) { 830 delay(10); 831 hcr = OREAD4(sc, OHCI_COMMAND_STATUS) & OHCI_HCR; 832 if (!hcr) 833 break; 834 } 835 if (hcr) { 836 aprint_error_dev(sc->sc_dev, "reset timeout\n"); 837 err = USBD_IOERROR; 838 goto bad5; 839 } 840 #ifdef OHCI_DEBUG 841 if (ohcidebug > 15) 842 ohci_dumpregs(sc); 843 #endif 844 845 /* The controller is now in SUSPEND state, we have 2ms to finish. */ 846 847 /* Set up HC registers. */ 848 OWRITE4(sc, OHCI_HCCA, DMAADDR(&sc->sc_hccadma, 0)); 849 OWRITE4(sc, OHCI_CONTROL_HEAD_ED, sc->sc_ctrl_head->physaddr); 850 OWRITE4(sc, OHCI_BULK_HEAD_ED, sc->sc_bulk_head->physaddr); 851 /* disable all interrupts and then switch on all desired interrupts */ 852 OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_ALL_INTRS); 853 /* switch on desired functional features */ 854 ctl = OREAD4(sc, OHCI_CONTROL); 855 ctl &= ~(OHCI_CBSR_MASK | OHCI_LES | OHCI_HCFS_MASK | OHCI_IR); 856 ctl |= OHCI_PLE | OHCI_IE | OHCI_CLE | OHCI_BLE | 857 OHCI_RATIO_1_4 | OHCI_HCFS_OPERATIONAL | rwc; 858 /* And finally start it! */ 859 OWRITE4(sc, OHCI_CONTROL, ctl); 860 861 /* 862 * The controller is now OPERATIONAL. Set a some final 863 * registers that should be set earlier, but that the 864 * controller ignores when in the SUSPEND state. 865 */ 866 ival = OHCI_GET_IVAL(fm); 867 fm = (OREAD4(sc, OHCI_FM_INTERVAL) & OHCI_FIT) ^ OHCI_FIT; 868 fm |= OHCI_FSMPS(ival) | ival; 869 OWRITE4(sc, OHCI_FM_INTERVAL, fm); 870 per = OHCI_PERIODIC(ival); /* 90% periodic */ 871 OWRITE4(sc, OHCI_PERIODIC_START, per); 872 873 /* Fiddle the No OverCurrent Protection bit to avoid chip bug. */ 874 OWRITE4(sc, OHCI_RH_DESCRIPTOR_A, desca | OHCI_NOCP); 875 OWRITE4(sc, OHCI_RH_STATUS, OHCI_LPSC); /* Enable port power */ 876 usb_delay_ms(&sc->sc_bus, OHCI_ENABLE_POWER_DELAY); 877 OWRITE4(sc, OHCI_RH_DESCRIPTOR_A, desca); 878 879 /* 880 * The AMD756 requires a delay before re-reading the register, 881 * otherwise it will occasionally report 0 ports. 882 */ 883 sc->sc_noport = 0; 884 for (i = 0; i < 10 && sc->sc_noport == 0; i++) { 885 usb_delay_ms(&sc->sc_bus, OHCI_READ_DESC_DELAY); 886 sc->sc_noport = OHCI_GET_NDP(OREAD4(sc, OHCI_RH_DESCRIPTOR_A)); 887 } 888 889 #ifdef OHCI_DEBUG 890 if (ohcidebug > 5) 891 ohci_dumpregs(sc); 892 #endif 893 894 /* Set up the bus struct. */ 895 sc->sc_bus.methods = &ohci_bus_methods; 896 sc->sc_bus.pipe_size = sizeof(struct ohci_pipe); 897 898 sc->sc_control = sc->sc_intre = 0; 899 900 /* Finally, turn on interrupts. */ 901 DPRINTFN(1,("ohci_init: enabling\n")); 902 OWRITE4(sc, OHCI_INTERRUPT_ENABLE, sc->sc_eintrs | OHCI_MIE); 903 904 return (USBD_NORMAL_COMPLETION); 905 906 bad5: 907 for (i = 0; i < OHCI_NO_EDS; i++) 908 ohci_free_sed(sc, sc->sc_eds[i]); 909 bad4: 910 ohci_free_sed(sc, sc->sc_isoc_head); 911 bad3: 912 ohci_free_sed(sc, sc->sc_bulk_head); 913 bad2: 914 ohci_free_sed(sc, sc->sc_ctrl_head); 915 bad1: 916 usb_freemem(&sc->sc_bus, &sc->sc_hccadma); 917 sc->sc_hcca = NULL; 918 return (err); 919 } 920 921 usbd_status 922 ohci_allocm(struct usbd_bus *bus, usb_dma_t *dma, u_int32_t size) 923 { 924 struct ohci_softc *sc = bus->hci_private; 925 usbd_status status; 926 927 status = usb_allocmem(&sc->sc_bus, size, 0, dma); 928 if (status == USBD_NOMEM) 929 status = usb_reserve_allocm(&sc->sc_dma_reserve, dma, size); 930 return status; 931 } 932 933 void 934 ohci_freem(struct usbd_bus *bus, usb_dma_t *dma) 935 { 936 struct ohci_softc *sc = bus->hci_private; 937 if (dma->block->flags & USB_DMA_RESERVE) { 938 usb_reserve_freem(&sc->sc_dma_reserve, dma); 939 return; 940 } 941 usb_freemem(&sc->sc_bus, dma); 942 } 943 944 usbd_xfer_handle 945 ohci_allocx(struct usbd_bus *bus) 946 { 947 struct ohci_softc *sc = bus->hci_private; 948 usbd_xfer_handle xfer; 949 950 xfer = SIMPLEQ_FIRST(&sc->sc_free_xfers); 951 if (xfer != NULL) { 952 SIMPLEQ_REMOVE_HEAD(&sc->sc_free_xfers, next); 953 #ifdef DIAGNOSTIC 954 if (xfer->busy_free != XFER_FREE) { 955 printf("ohci_allocx: xfer=%p not free, 0x%08x\n", xfer, 956 xfer->busy_free); 957 } 958 #endif 959 } else { 960 xfer = malloc(sizeof(struct ohci_xfer), M_USB, M_NOWAIT); 961 } 962 if (xfer != NULL) { 963 memset(xfer, 0, sizeof (struct ohci_xfer)); 964 #ifdef DIAGNOSTIC 965 xfer->busy_free = XFER_BUSY; 966 #endif 967 } 968 return (xfer); 969 } 970 971 void 972 ohci_freex(struct usbd_bus *bus, usbd_xfer_handle xfer) 973 { 974 struct ohci_softc *sc = bus->hci_private; 975 976 #ifdef DIAGNOSTIC 977 if (xfer->busy_free != XFER_BUSY) { 978 printf("ohci_freex: xfer=%p not busy, 0x%08x\n", xfer, 979 xfer->busy_free); 980 } 981 xfer->busy_free = XFER_FREE; 982 #endif 983 SIMPLEQ_INSERT_HEAD(&sc->sc_free_xfers, xfer, next); 984 } 985 986 /* 987 * Shut down the controller when the system is going down. 988 */ 989 bool 990 ohci_shutdown(device_t self, int flags) 991 { 992 ohci_softc_t *sc = device_private(self); 993 994 DPRINTF(("ohci_shutdown: stopping the HC\n")); 995 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); 996 return true; 997 } 998 999 bool 1000 ohci_resume(device_t dv, const pmf_qual_t *qual) 1001 { 1002 ohci_softc_t *sc = device_private(dv); 1003 uint32_t ctl; 1004 int s; 1005 1006 s = splhardusb(); 1007 sc->sc_bus.use_polling++; 1008 /* Some broken BIOSes do not recover these values */ 1009 OWRITE4(sc, OHCI_HCCA, DMAADDR(&sc->sc_hccadma, 0)); 1010 OWRITE4(sc, OHCI_CONTROL_HEAD_ED, 1011 sc->sc_ctrl_head->physaddr); 1012 OWRITE4(sc, OHCI_BULK_HEAD_ED, 1013 sc->sc_bulk_head->physaddr); 1014 if (sc->sc_intre) 1015 OWRITE4(sc, OHCI_INTERRUPT_ENABLE, sc->sc_intre & 1016 (OHCI_ALL_INTRS | OHCI_MIE)); 1017 if (sc->sc_control) 1018 ctl = sc->sc_control; 1019 else 1020 ctl = OREAD4(sc, OHCI_CONTROL); 1021 ctl |= OHCI_HCFS_RESUME; 1022 OWRITE4(sc, OHCI_CONTROL, ctl); 1023 usb_delay_ms(&sc->sc_bus, USB_RESUME_DELAY); 1024 ctl = (ctl & ~OHCI_HCFS_MASK) | OHCI_HCFS_OPERATIONAL; 1025 OWRITE4(sc, OHCI_CONTROL, ctl); 1026 usb_delay_ms(&sc->sc_bus, USB_RESUME_RECOVERY); 1027 sc->sc_control = sc->sc_intre = 0; 1028 sc->sc_bus.use_polling--; 1029 splx(s); 1030 1031 return true; 1032 } 1033 1034 bool 1035 ohci_suspend(device_t dv, const pmf_qual_t *qual) 1036 { 1037 ohci_softc_t *sc = device_private(dv); 1038 uint32_t ctl; 1039 int s; 1040 1041 s = splhardusb(); 1042 sc->sc_bus.use_polling++; 1043 ctl = OREAD4(sc, OHCI_CONTROL) & ~OHCI_HCFS_MASK; 1044 if (sc->sc_control == 0) { 1045 /* 1046 * Preserve register values, in case that BIOS 1047 * does not recover them. 1048 */ 1049 sc->sc_control = ctl; 1050 sc->sc_intre = OREAD4(sc, 1051 OHCI_INTERRUPT_ENABLE); 1052 } 1053 ctl |= OHCI_HCFS_SUSPEND; 1054 OWRITE4(sc, OHCI_CONTROL, ctl); 1055 usb_delay_ms(&sc->sc_bus, USB_RESUME_WAIT); 1056 sc->sc_bus.use_polling--; 1057 splx(s); 1058 1059 return true; 1060 } 1061 1062 #ifdef OHCI_DEBUG 1063 void 1064 ohci_dumpregs(ohci_softc_t *sc) 1065 { 1066 DPRINTF(("ohci_dumpregs: rev=0x%08x control=0x%08x command=0x%08x\n", 1067 OREAD4(sc, OHCI_REVISION), 1068 OREAD4(sc, OHCI_CONTROL), 1069 OREAD4(sc, OHCI_COMMAND_STATUS))); 1070 DPRINTF((" intrstat=0x%08x intre=0x%08x intrd=0x%08x\n", 1071 OREAD4(sc, OHCI_INTERRUPT_STATUS), 1072 OREAD4(sc, OHCI_INTERRUPT_ENABLE), 1073 OREAD4(sc, OHCI_INTERRUPT_DISABLE))); 1074 DPRINTF((" hcca=0x%08x percur=0x%08x ctrlhd=0x%08x\n", 1075 OREAD4(sc, OHCI_HCCA), 1076 OREAD4(sc, OHCI_PERIOD_CURRENT_ED), 1077 OREAD4(sc, OHCI_CONTROL_HEAD_ED))); 1078 DPRINTF((" ctrlcur=0x%08x bulkhd=0x%08x bulkcur=0x%08x\n", 1079 OREAD4(sc, OHCI_CONTROL_CURRENT_ED), 1080 OREAD4(sc, OHCI_BULK_HEAD_ED), 1081 OREAD4(sc, OHCI_BULK_CURRENT_ED))); 1082 DPRINTF((" done=0x%08x fmival=0x%08x fmrem=0x%08x\n", 1083 OREAD4(sc, OHCI_DONE_HEAD), 1084 OREAD4(sc, OHCI_FM_INTERVAL), 1085 OREAD4(sc, OHCI_FM_REMAINING))); 1086 DPRINTF((" fmnum=0x%08x perst=0x%08x lsthrs=0x%08x\n", 1087 OREAD4(sc, OHCI_FM_NUMBER), 1088 OREAD4(sc, OHCI_PERIODIC_START), 1089 OREAD4(sc, OHCI_LS_THRESHOLD))); 1090 DPRINTF((" desca=0x%08x descb=0x%08x stat=0x%08x\n", 1091 OREAD4(sc, OHCI_RH_DESCRIPTOR_A), 1092 OREAD4(sc, OHCI_RH_DESCRIPTOR_B), 1093 OREAD4(sc, OHCI_RH_STATUS))); 1094 DPRINTF((" port1=0x%08x port2=0x%08x\n", 1095 OREAD4(sc, OHCI_RH_PORT_STATUS(1)), 1096 OREAD4(sc, OHCI_RH_PORT_STATUS(2)))); 1097 DPRINTF((" HCCA: frame_number=0x%04x done_head=0x%08x\n", 1098 O32TOH(sc->sc_hcca->hcca_frame_number), 1099 O32TOH(sc->sc_hcca->hcca_done_head))); 1100 } 1101 #endif 1102 1103 Static int ohci_intr1(ohci_softc_t *); 1104 1105 int 1106 ohci_intr(void *p) 1107 { 1108 ohci_softc_t *sc = p; 1109 1110 if (sc == NULL || sc->sc_dying || !device_has_power(sc->sc_dev)) 1111 return (0); 1112 1113 /* If we get an interrupt while polling, then just ignore it. */ 1114 if (sc->sc_bus.use_polling) { 1115 #ifdef DIAGNOSTIC 1116 DPRINTFN(16, ("ohci_intr: ignored interrupt while polling\n")); 1117 #endif 1118 /* for level triggered intrs, should do something to ack */ 1119 OWRITE4(sc, OHCI_INTERRUPT_STATUS, 1120 OREAD4(sc, OHCI_INTERRUPT_STATUS)); 1121 1122 return (0); 1123 } 1124 1125 return (ohci_intr1(sc)); 1126 } 1127 1128 Static int 1129 ohci_intr1(ohci_softc_t *sc) 1130 { 1131 u_int32_t intrs, eintrs; 1132 1133 DPRINTFN(14,("ohci_intr1: enter\n")); 1134 1135 /* In case the interrupt occurs before initialization has completed. */ 1136 if (sc == NULL || sc->sc_hcca == NULL) { 1137 #ifdef DIAGNOSTIC 1138 printf("ohci_intr: sc->sc_hcca == NULL\n"); 1139 #endif 1140 return (0); 1141 } 1142 1143 intrs = OREAD4(sc, OHCI_INTERRUPT_STATUS); 1144 if (!intrs) 1145 return (0); 1146 1147 OWRITE4(sc, OHCI_INTERRUPT_STATUS, intrs & ~(OHCI_MIE|OHCI_WDH)); /* Acknowledge */ 1148 eintrs = intrs & sc->sc_eintrs; 1149 if (!eintrs) 1150 return (0); 1151 1152 sc->sc_bus.intr_context++; 1153 sc->sc_bus.no_intrs++; 1154 DPRINTFN(7, ("ohci_intr: sc=%p intrs=0x%x(0x%x) eintrs=0x%x\n", 1155 sc, (u_int)intrs, OREAD4(sc, OHCI_INTERRUPT_STATUS), 1156 (u_int)eintrs)); 1157 1158 if (eintrs & OHCI_SO) { 1159 sc->sc_overrun_cnt++; 1160 if (usbd_ratecheck(&sc->sc_overrun_ntc)) { 1161 printf("%s: %u scheduling overruns\n", 1162 device_xname(sc->sc_dev), sc->sc_overrun_cnt); 1163 sc->sc_overrun_cnt = 0; 1164 } 1165 /* XXX do what */ 1166 eintrs &= ~OHCI_SO; 1167 } 1168 if (eintrs & OHCI_WDH) { 1169 /* 1170 * We block the interrupt below, and reenable it later from 1171 * ohci_softintr(). 1172 */ 1173 usb_schedsoftintr(&sc->sc_bus); 1174 } 1175 if (eintrs & OHCI_RD) { 1176 printf("%s: resume detect\n", device_xname(sc->sc_dev)); 1177 /* XXX process resume detect */ 1178 } 1179 if (eintrs & OHCI_UE) { 1180 printf("%s: unrecoverable error, controller halted\n", 1181 device_xname(sc->sc_dev)); 1182 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); 1183 /* XXX what else */ 1184 } 1185 if (eintrs & OHCI_RHSC) { 1186 /* 1187 * We block the interrupt below, and reenable it later from 1188 * a timeout. 1189 */ 1190 ohci_rhsc(sc, sc->sc_intrxfer); 1191 /* Do not allow RHSC interrupts > 1 per second */ 1192 usb_callout(sc->sc_tmo_rhsc, hz, ohci_rhsc_enable, sc); 1193 } 1194 1195 sc->sc_bus.intr_context--; 1196 1197 if (eintrs != 0) { 1198 /* Block unprocessed interrupts. */ 1199 OWRITE4(sc, OHCI_INTERRUPT_DISABLE, eintrs); 1200 sc->sc_eintrs &= ~eintrs; 1201 DPRINTFN(1, ("%s: blocking intrs 0x%x\n", 1202 device_xname(sc->sc_dev), eintrs)); 1203 } 1204 1205 return (1); 1206 } 1207 1208 void 1209 ohci_rhsc_enable(void *v_sc) 1210 { 1211 ohci_softc_t *sc = v_sc; 1212 int s; 1213 1214 s = splhardusb(); 1215 sc->sc_eintrs |= OHCI_RHSC; 1216 OWRITE4(sc, OHCI_INTERRUPT_ENABLE, OHCI_RHSC); 1217 splx(s); 1218 } 1219 1220 #ifdef OHCI_DEBUG 1221 const char *ohci_cc_strs[] = { 1222 "NO_ERROR", 1223 "CRC", 1224 "BIT_STUFFING", 1225 "DATA_TOGGLE_MISMATCH", 1226 "STALL", 1227 "DEVICE_NOT_RESPONDING", 1228 "PID_CHECK_FAILURE", 1229 "UNEXPECTED_PID", 1230 "DATA_OVERRUN", 1231 "DATA_UNDERRUN", 1232 "BUFFER_OVERRUN", 1233 "BUFFER_UNDERRUN", 1234 "reserved", 1235 "reserved", 1236 "NOT_ACCESSED", 1237 "NOT_ACCESSED", 1238 }; 1239 #endif 1240 1241 void 1242 ohci_softintr(void *v) 1243 { 1244 struct usbd_bus *bus = v; 1245 ohci_softc_t *sc = bus->hci_private; 1246 ohci_soft_itd_t *sitd, *sidone, *sitdnext; 1247 ohci_soft_td_t *std, *sdone, *stdnext; 1248 usbd_xfer_handle xfer; 1249 struct ohci_pipe *opipe; 1250 int len, cc, s; 1251 int i, j, actlen, iframes, uedir; 1252 ohci_physaddr_t done; 1253 1254 DPRINTFN(10,("ohci_softintr: enter\n")); 1255 1256 sc->sc_bus.intr_context++; 1257 1258 s = splhardusb(); 1259 usb_syncmem(&sc->sc_hccadma, offsetof(struct ohci_hcca, hcca_done_head), 1260 sizeof(sc->sc_hcca->hcca_done_head), 1261 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 1262 done = O32TOH(sc->sc_hcca->hcca_done_head) & ~OHCI_DONE_INTRS; 1263 sc->sc_hcca->hcca_done_head = 0; 1264 usb_syncmem(&sc->sc_hccadma, offsetof(struct ohci_hcca, hcca_done_head), 1265 sizeof(sc->sc_hcca->hcca_done_head), 1266 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1267 OWRITE4(sc, OHCI_INTERRUPT_STATUS, OHCI_WDH); 1268 sc->sc_eintrs |= OHCI_WDH; 1269 OWRITE4(sc, OHCI_INTERRUPT_ENABLE, OHCI_WDH); 1270 splx(s); 1271 1272 /* Reverse the done list. */ 1273 for (sdone = NULL, sidone = NULL; done != 0; ) { 1274 std = ohci_hash_find_td(sc, done); 1275 if (std != NULL) { 1276 usb_syncmem(&std->dma, std->offs, sizeof(std->td), 1277 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 1278 std->dnext = sdone; 1279 done = O32TOH(std->td.td_nexttd); 1280 sdone = std; 1281 DPRINTFN(10,("add TD %p\n", std)); 1282 continue; 1283 } 1284 sitd = ohci_hash_find_itd(sc, done); 1285 if (sitd != NULL) { 1286 usb_syncmem(&sitd->dma, sitd->offs, sizeof(sitd->itd), 1287 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 1288 sitd->dnext = sidone; 1289 done = O32TOH(sitd->itd.itd_nextitd); 1290 sidone = sitd; 1291 DPRINTFN(5,("add ITD %p\n", sitd)); 1292 continue; 1293 } 1294 panic("ohci_softintr: addr 0x%08lx not found", (u_long)done); 1295 } 1296 1297 DPRINTFN(10,("ohci_softintr: sdone=%p sidone=%p\n", sdone, sidone)); 1298 1299 #ifdef OHCI_DEBUG 1300 if (ohcidebug > 10) { 1301 DPRINTF(("ohci_process_done: TD done:\n")); 1302 ohci_dump_tds(sc, sdone); 1303 } 1304 #endif 1305 1306 for (std = sdone; std; std = stdnext) { 1307 xfer = std->xfer; 1308 stdnext = std->dnext; 1309 DPRINTFN(10, ("ohci_process_done: std=%p xfer=%p hcpriv=%p\n", 1310 std, xfer, xfer ? xfer->hcpriv : 0)); 1311 if (xfer == NULL) { 1312 /* 1313 * xfer == NULL: There seems to be no xfer associated 1314 * with this TD. It is tailp that happened to end up on 1315 * the done queue. 1316 * Shouldn't happen, but some chips are broken(?). 1317 */ 1318 continue; 1319 } 1320 if (xfer->status == USBD_CANCELLED || 1321 xfer->status == USBD_TIMEOUT) { 1322 DPRINTF(("ohci_process_done: cancel/timeout %p\n", 1323 xfer)); 1324 /* Handled by abort routine. */ 1325 continue; 1326 } 1327 usb_uncallout(xfer->timeout_handle, ohci_timeout, xfer); 1328 1329 len = std->len; 1330 if (std->td.td_cbp != 0) 1331 len -= O32TOH(std->td.td_be) - 1332 O32TOH(std->td.td_cbp) + 1; 1333 DPRINTFN(10, ("ohci_process_done: len=%d, flags=0x%x\n", len, 1334 std->flags)); 1335 if (std->flags & OHCI_ADD_LEN) 1336 xfer->actlen += len; 1337 1338 cc = OHCI_TD_GET_CC(O32TOH(std->td.td_flags)); 1339 if (cc == OHCI_CC_NO_ERROR) { 1340 if (std->flags & OHCI_CALL_DONE) { 1341 xfer->status = USBD_NORMAL_COMPLETION; 1342 s = splusb(); 1343 usb_transfer_complete(xfer); 1344 splx(s); 1345 } 1346 ohci_free_std(sc, std); 1347 } else { 1348 /* 1349 * Endpoint is halted. First unlink all the TDs 1350 * belonging to the failed transfer, and then restart 1351 * the endpoint. 1352 */ 1353 ohci_soft_td_t *p, *n; 1354 opipe = (struct ohci_pipe *)xfer->pipe; 1355 1356 DPRINTFN(15,("ohci_process_done: error cc=%d (%s)\n", 1357 OHCI_TD_GET_CC(O32TOH(std->td.td_flags)), 1358 ohci_cc_strs[OHCI_TD_GET_CC(O32TOH(std->td.td_flags))])); 1359 1360 /* remove TDs */ 1361 for (p = std; p->xfer == xfer; p = n) { 1362 n = p->nexttd; 1363 ohci_free_std(sc, p); 1364 } 1365 1366 /* clear halt */ 1367 opipe->sed->ed.ed_headp = HTOO32(p->physaddr); 1368 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); 1369 1370 if (cc == OHCI_CC_STALL) 1371 xfer->status = USBD_STALLED; 1372 else 1373 xfer->status = USBD_IOERROR; 1374 s = splusb(); 1375 usb_transfer_complete(xfer); 1376 splx(s); 1377 } 1378 } 1379 1380 #ifdef OHCI_DEBUG 1381 if (ohcidebug > 10) { 1382 DPRINTF(("ohci_softintr: ITD done:\n")); 1383 ohci_dump_itds(sc, sidone); 1384 } 1385 #endif 1386 1387 for (sitd = sidone; sitd != NULL; sitd = sitdnext) { 1388 xfer = sitd->xfer; 1389 sitdnext = sitd->dnext; 1390 DPRINTFN(1, ("ohci_process_done: sitd=%p xfer=%p hcpriv=%p\n", 1391 sitd, xfer, xfer ? xfer->hcpriv : 0)); 1392 if (xfer == NULL) 1393 continue; 1394 if (xfer->status == USBD_CANCELLED || 1395 xfer->status == USBD_TIMEOUT) { 1396 DPRINTF(("ohci_process_done: cancel/timeout %p\n", 1397 xfer)); 1398 /* Handled by abort routine. */ 1399 continue; 1400 } 1401 #ifdef DIAGNOSTIC 1402 if (sitd->isdone) 1403 printf("ohci_softintr: sitd=%p is done\n", sitd); 1404 sitd->isdone = 1; 1405 #endif 1406 if (sitd->flags & OHCI_CALL_DONE) { 1407 ohci_soft_itd_t *next; 1408 1409 opipe = (struct ohci_pipe *)xfer->pipe; 1410 opipe->u.iso.inuse -= xfer->nframes; 1411 uedir = UE_GET_DIR(xfer->pipe->endpoint->edesc-> 1412 bEndpointAddress); 1413 xfer->status = USBD_NORMAL_COMPLETION; 1414 actlen = 0; 1415 for (i = 0, sitd = xfer->hcpriv;; 1416 sitd = next) { 1417 next = sitd->nextitd; 1418 if (OHCI_ITD_GET_CC(O32TOH(sitd-> 1419 itd.itd_flags)) != OHCI_CC_NO_ERROR) 1420 xfer->status = USBD_IOERROR; 1421 /* For input, update frlengths with actual */ 1422 /* XXX anything necessary for output? */ 1423 if (uedir == UE_DIR_IN && 1424 xfer->status == USBD_NORMAL_COMPLETION) { 1425 iframes = OHCI_ITD_GET_FC(O32TOH( 1426 sitd->itd.itd_flags)); 1427 for (j = 0; j < iframes; i++, j++) { 1428 len = O16TOH(sitd-> 1429 itd.itd_offset[j]); 1430 if ((OHCI_ITD_PSW_GET_CC(len) & 1431 OHCI_CC_NOT_ACCESSED_MASK) 1432 == OHCI_CC_NOT_ACCESSED) 1433 len = 0; 1434 else 1435 len = OHCI_ITD_PSW_LENGTH(len); 1436 xfer->frlengths[i] = len; 1437 actlen += len; 1438 } 1439 } 1440 if (sitd->flags & OHCI_CALL_DONE) 1441 break; 1442 ohci_free_sitd(sc, sitd); 1443 } 1444 ohci_free_sitd(sc, sitd); 1445 if (uedir == UE_DIR_IN && 1446 xfer->status == USBD_NORMAL_COMPLETION) 1447 xfer->actlen = actlen; 1448 xfer->hcpriv = NULL; 1449 1450 s = splusb(); 1451 usb_transfer_complete(xfer); 1452 splx(s); 1453 } 1454 } 1455 1456 #ifdef USB_USE_SOFTINTR 1457 if (sc->sc_softwake) { 1458 sc->sc_softwake = 0; 1459 wakeup(&sc->sc_softwake); 1460 } 1461 #endif /* USB_USE_SOFTINTR */ 1462 1463 sc->sc_bus.intr_context--; 1464 DPRINTFN(10,("ohci_softintr: done:\n")); 1465 } 1466 1467 void 1468 ohci_device_ctrl_done(usbd_xfer_handle xfer) 1469 { 1470 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 1471 int len = UGETW(xfer->request.wLength); 1472 int isread = (xfer->request.bmRequestType & UT_READ); 1473 1474 DPRINTFN(10,("ohci_device_ctrl_done: xfer=%p\n", xfer)); 1475 1476 #ifdef DIAGNOSTIC 1477 if (!(xfer->rqflags & URQ_REQUEST)) { 1478 panic("ohci_device_ctrl_done: not a request"); 1479 } 1480 #endif 1481 if (len) 1482 usb_syncmem(&xfer->dmabuf, 0, len, 1483 isread ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 1484 usb_syncmem(&opipe->u.ctl.reqdma, 0, 1485 sizeof(usb_device_request_t), BUS_DMASYNC_POSTWRITE); 1486 } 1487 1488 void 1489 ohci_device_intr_done(usbd_xfer_handle xfer) 1490 { 1491 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 1492 ohci_softc_t *sc = opipe->pipe.device->bus->hci_private; 1493 ohci_soft_ed_t *sed = opipe->sed; 1494 ohci_soft_td_t *data, *tail; 1495 int isread = 1496 (UE_GET_DIR(xfer->pipe->endpoint->edesc->bEndpointAddress) == UE_DIR_IN); 1497 1498 1499 DPRINTFN(10,("ohci_device_intr_done: xfer=%p, actlen=%d\n", 1500 xfer, xfer->actlen)); 1501 1502 usb_syncmem(&xfer->dmabuf, 0, xfer->length, 1503 isread ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 1504 if (xfer->pipe->repeat) { 1505 data = opipe->tail.td; 1506 tail = ohci_alloc_std(sc); /* XXX should reuse TD */ 1507 if (tail == NULL) { 1508 xfer->status = USBD_NOMEM; 1509 return; 1510 } 1511 tail->xfer = NULL; 1512 1513 data->td.td_flags = HTOO32( 1514 OHCI_TD_IN | OHCI_TD_NOCC | 1515 OHCI_TD_SET_DI(1) | OHCI_TD_TOGGLE_CARRY); 1516 if (xfer->flags & USBD_SHORT_XFER_OK) 1517 data->td.td_flags |= HTOO32(OHCI_TD_R); 1518 data->td.td_cbp = HTOO32(DMAADDR(&xfer->dmabuf, 0)); 1519 data->nexttd = tail; 1520 data->td.td_nexttd = HTOO32(tail->physaddr); 1521 data->td.td_be = HTOO32(O32TOH(data->td.td_cbp) + 1522 xfer->length - 1); 1523 data->len = xfer->length; 1524 data->xfer = xfer; 1525 data->flags = OHCI_CALL_DONE | OHCI_ADD_LEN; 1526 usb_syncmem(&data->dma, data->offs, sizeof(data->td), 1527 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1528 xfer->hcpriv = data; 1529 xfer->actlen = 0; 1530 1531 sed->ed.ed_tailp = HTOO32(tail->physaddr); 1532 usb_syncmem(&sed->dma, 1533 sed->offs + offsetof(ohci_ed_t, ed_tailp), 1534 sizeof(sed->ed.ed_tailp), 1535 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1536 opipe->tail.td = tail; 1537 } 1538 } 1539 1540 void 1541 ohci_device_bulk_done(usbd_xfer_handle xfer) 1542 { 1543 int isread = 1544 (UE_GET_DIR(xfer->pipe->endpoint->edesc->bEndpointAddress) == UE_DIR_IN); 1545 1546 DPRINTFN(10,("ohci_device_bulk_done: xfer=%p, actlen=%d\n", 1547 xfer, xfer->actlen)); 1548 usb_syncmem(&xfer->dmabuf, 0, xfer->length, 1549 isread ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 1550 } 1551 1552 void 1553 ohci_rhsc(ohci_softc_t *sc, usbd_xfer_handle xfer) 1554 { 1555 usbd_pipe_handle pipe; 1556 u_char *p; 1557 int i, m; 1558 int hstatus; 1559 1560 hstatus = OREAD4(sc, OHCI_RH_STATUS); 1561 DPRINTF(("ohci_rhsc: sc=%p xfer=%p hstatus=0x%08x\n", 1562 sc, xfer, hstatus)); 1563 1564 if (xfer == NULL) { 1565 /* Just ignore the change. */ 1566 return; 1567 } 1568 1569 pipe = xfer->pipe; 1570 1571 p = KERNADDR(&xfer->dmabuf, 0); 1572 m = min(sc->sc_noport, xfer->length * 8 - 1); 1573 memset(p, 0, xfer->length); 1574 for (i = 1; i <= m; i++) { 1575 /* Pick out CHANGE bits from the status reg. */ 1576 if (OREAD4(sc, OHCI_RH_PORT_STATUS(i)) >> 16) 1577 p[i/8] |= 1 << (i%8); 1578 } 1579 DPRINTF(("ohci_rhsc: change=0x%02x\n", *p)); 1580 xfer->actlen = xfer->length; 1581 xfer->status = USBD_NORMAL_COMPLETION; 1582 1583 usb_transfer_complete(xfer); 1584 } 1585 1586 void 1587 ohci_root_intr_done(usbd_xfer_handle xfer) 1588 { 1589 } 1590 1591 void 1592 ohci_root_ctrl_done(usbd_xfer_handle xfer) 1593 { 1594 } 1595 1596 /* 1597 * Wait here until controller claims to have an interrupt. 1598 * Then call ohci_intr and return. Use timeout to avoid waiting 1599 * too long. 1600 */ 1601 void 1602 ohci_waitintr(ohci_softc_t *sc, usbd_xfer_handle xfer) 1603 { 1604 int timo; 1605 u_int32_t intrs; 1606 1607 xfer->status = USBD_IN_PROGRESS; 1608 for (timo = xfer->timeout; timo >= 0; timo--) { 1609 usb_delay_ms(&sc->sc_bus, 1); 1610 if (sc->sc_dying) 1611 break; 1612 intrs = OREAD4(sc, OHCI_INTERRUPT_STATUS) & sc->sc_eintrs; 1613 DPRINTFN(15,("ohci_waitintr: 0x%04x\n", intrs)); 1614 #ifdef OHCI_DEBUG 1615 if (ohcidebug > 15) 1616 ohci_dumpregs(sc); 1617 #endif 1618 if (intrs) { 1619 ohci_intr1(sc); 1620 if (xfer->status != USBD_IN_PROGRESS) 1621 return; 1622 } 1623 } 1624 1625 /* Timeout */ 1626 DPRINTF(("ohci_waitintr: timeout\n")); 1627 xfer->status = USBD_TIMEOUT; 1628 usb_transfer_complete(xfer); 1629 /* XXX should free TD */ 1630 } 1631 1632 void 1633 ohci_poll(struct usbd_bus *bus) 1634 { 1635 ohci_softc_t *sc = bus->hci_private; 1636 #ifdef OHCI_DEBUG 1637 static int last; 1638 int new; 1639 new = OREAD4(sc, OHCI_INTERRUPT_STATUS); 1640 if (new != last) { 1641 DPRINTFN(10,("ohci_poll: intrs=0x%04x\n", new)); 1642 last = new; 1643 } 1644 #endif 1645 1646 if (OREAD4(sc, OHCI_INTERRUPT_STATUS) & sc->sc_eintrs) 1647 ohci_intr1(sc); 1648 } 1649 1650 usbd_status 1651 ohci_device_request(usbd_xfer_handle xfer) 1652 { 1653 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 1654 usb_device_request_t *req = &xfer->request; 1655 usbd_device_handle dev = opipe->pipe.device; 1656 ohci_softc_t *sc = dev->bus->hci_private; 1657 int addr = dev->address; 1658 ohci_soft_td_t *setup, *stat, *next, *tail; 1659 ohci_soft_ed_t *sed; 1660 int isread; 1661 int len; 1662 usbd_status err; 1663 int s; 1664 1665 isread = req->bmRequestType & UT_READ; 1666 len = UGETW(req->wLength); 1667 1668 DPRINTFN(3,("ohci_device_control type=0x%02x, request=0x%02x, " 1669 "wValue=0x%04x, wIndex=0x%04x len=%d, addr=%d, endpt=%d\n", 1670 req->bmRequestType, req->bRequest, UGETW(req->wValue), 1671 UGETW(req->wIndex), len, addr, 1672 opipe->pipe.endpoint->edesc->bEndpointAddress)); 1673 1674 setup = opipe->tail.td; 1675 stat = ohci_alloc_std(sc); 1676 if (stat == NULL) { 1677 err = USBD_NOMEM; 1678 goto bad1; 1679 } 1680 tail = ohci_alloc_std(sc); 1681 if (tail == NULL) { 1682 err = USBD_NOMEM; 1683 goto bad2; 1684 } 1685 tail->xfer = NULL; 1686 1687 sed = opipe->sed; 1688 opipe->u.ctl.length = len; 1689 1690 /* Update device address and length since they may have changed 1691 during the setup of the control pipe in usbd_new_device(). */ 1692 /* XXX This only needs to be done once, but it's too early in open. */ 1693 /* XXXX Should not touch ED here! */ 1694 1695 usb_syncmem(&sed->dma, sed->offs + offsetof(ohci_ed_t, ed_flags), 1696 sizeof(sed->ed.ed_flags), 1697 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 1698 sed->ed.ed_flags = HTOO32( 1699 (O32TOH(sed->ed.ed_flags) & ~(OHCI_ED_ADDRMASK | OHCI_ED_MAXPMASK)) | 1700 OHCI_ED_SET_FA(addr) | 1701 OHCI_ED_SET_MAXP(UGETW(opipe->pipe.endpoint->edesc->wMaxPacketSize))); 1702 usb_syncmem(&sed->dma, sed->offs + offsetof(ohci_ed_t, ed_flags), 1703 sizeof(sed->ed.ed_flags), 1704 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1705 1706 next = stat; 1707 1708 /* Set up data transaction */ 1709 if (len != 0) { 1710 ohci_soft_td_t *std = stat; 1711 1712 err = ohci_alloc_std_chain(opipe, sc, len, isread, xfer, 1713 std, &stat); 1714 stat = stat->nexttd; /* point at free TD */ 1715 if (err) 1716 goto bad3; 1717 /* Start toggle at 1 and then use the carried toggle. */ 1718 std->td.td_flags &= HTOO32(~OHCI_TD_TOGGLE_MASK); 1719 std->td.td_flags |= HTOO32(OHCI_TD_TOGGLE_1); 1720 usb_syncmem(&std->dma, 1721 std->offs + offsetof(ohci_td_t, td_flags), 1722 sizeof(std->td.td_flags), 1723 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1724 } 1725 1726 memcpy(KERNADDR(&opipe->u.ctl.reqdma, 0), req, sizeof *req); 1727 usb_syncmem(&opipe->u.ctl.reqdma, 0, sizeof *req, BUS_DMASYNC_PREWRITE); 1728 1729 setup->td.td_flags = HTOO32(OHCI_TD_SETUP | OHCI_TD_NOCC | 1730 OHCI_TD_TOGGLE_0 | OHCI_TD_NOINTR); 1731 setup->td.td_cbp = HTOO32(DMAADDR(&opipe->u.ctl.reqdma, 0)); 1732 setup->nexttd = next; 1733 setup->td.td_nexttd = HTOO32(next->physaddr); 1734 setup->td.td_be = HTOO32(O32TOH(setup->td.td_cbp) + sizeof *req - 1); 1735 setup->len = 0; 1736 setup->xfer = xfer; 1737 setup->flags = 0; 1738 xfer->hcpriv = setup; 1739 usb_syncmem(&setup->dma, setup->offs, sizeof(setup->td), 1740 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1741 1742 stat->td.td_flags = HTOO32( 1743 (isread ? OHCI_TD_OUT : OHCI_TD_IN) | 1744 OHCI_TD_NOCC | OHCI_TD_TOGGLE_1 | OHCI_TD_SET_DI(1)); 1745 stat->td.td_cbp = 0; 1746 stat->nexttd = tail; 1747 stat->td.td_nexttd = HTOO32(tail->physaddr); 1748 stat->td.td_be = 0; 1749 stat->flags = OHCI_CALL_DONE; 1750 stat->len = 0; 1751 stat->xfer = xfer; 1752 usb_syncmem(&stat->dma, stat->offs, sizeof(stat->td), 1753 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1754 1755 #ifdef OHCI_DEBUG 1756 if (ohcidebug > 5) { 1757 DPRINTF(("ohci_device_request:\n")); 1758 ohci_dump_ed(sc, sed); 1759 ohci_dump_tds(sc, setup); 1760 } 1761 #endif 1762 1763 /* Insert ED in schedule */ 1764 s = splusb(); 1765 sed->ed.ed_tailp = HTOO32(tail->physaddr); 1766 usb_syncmem(&sed->dma, 1767 sed->offs + offsetof(ohci_ed_t, ed_tailp), 1768 sizeof(sed->ed.ed_tailp), 1769 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1770 opipe->tail.td = tail; 1771 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); 1772 if (xfer->timeout && !sc->sc_bus.use_polling) { 1773 usb_callout(xfer->timeout_handle, mstohz(xfer->timeout), 1774 ohci_timeout, xfer); 1775 } 1776 splx(s); 1777 1778 #ifdef OHCI_DEBUG 1779 if (ohcidebug > 20) { 1780 delay(10000); 1781 DPRINTF(("ohci_device_request: status=%x\n", 1782 OREAD4(sc, OHCI_COMMAND_STATUS))); 1783 ohci_dumpregs(sc); 1784 printf("ctrl head:\n"); 1785 ohci_dump_ed(sc, sc->sc_ctrl_head); 1786 printf("sed:\n"); 1787 ohci_dump_ed(sc, sed); 1788 ohci_dump_tds(sc, setup); 1789 } 1790 #endif 1791 1792 return (USBD_NORMAL_COMPLETION); 1793 1794 bad3: 1795 ohci_free_std(sc, tail); 1796 bad2: 1797 ohci_free_std(sc, stat); 1798 bad1: 1799 return (err); 1800 } 1801 1802 /* 1803 * Add an ED to the schedule. Called at splusb(). 1804 */ 1805 void 1806 ohci_add_ed(ohci_softc_t *sc, ohci_soft_ed_t *sed, ohci_soft_ed_t *head) 1807 { 1808 DPRINTFN(8,("ohci_add_ed: sed=%p head=%p\n", sed, head)); 1809 1810 SPLUSBCHECK; 1811 usb_syncmem(&head->dma, head->offs + offsetof(ohci_ed_t, ed_nexted), 1812 sizeof(head->ed.ed_nexted), 1813 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 1814 sed->next = head->next; 1815 sed->ed.ed_nexted = head->ed.ed_nexted; 1816 usb_syncmem(&sed->dma, sed->offs + offsetof(ohci_ed_t, ed_nexted), 1817 sizeof(sed->ed.ed_nexted), 1818 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1819 head->next = sed; 1820 head->ed.ed_nexted = HTOO32(sed->physaddr); 1821 usb_syncmem(&head->dma, head->offs + offsetof(ohci_ed_t, ed_nexted), 1822 sizeof(head->ed.ed_nexted), 1823 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1824 } 1825 1826 /* 1827 * Remove an ED from the schedule. Called at splusb(). 1828 */ 1829 void 1830 ohci_rem_ed(ohci_soft_ed_t *sed, ohci_soft_ed_t *head) 1831 { 1832 ohci_soft_ed_t *p; 1833 1834 SPLUSBCHECK; 1835 1836 /* XXX */ 1837 for (p = head; p != NULL && p->next != sed; p = p->next) 1838 ; 1839 if (p == NULL) 1840 panic("ohci_rem_ed: ED not found"); 1841 usb_syncmem(&sed->dma, sed->offs + offsetof(ohci_ed_t, ed_nexted), 1842 sizeof(sed->ed.ed_nexted), 1843 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 1844 p->next = sed->next; 1845 p->ed.ed_nexted = sed->ed.ed_nexted; 1846 usb_syncmem(&p->dma, p->offs + offsetof(ohci_ed_t, ed_nexted), 1847 sizeof(p->ed.ed_nexted), 1848 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1849 } 1850 1851 /* 1852 * When a transfer is completed the TD is added to the done queue by 1853 * the host controller. This queue is the processed by software. 1854 * Unfortunately the queue contains the physical address of the TD 1855 * and we have no simple way to translate this back to a kernel address. 1856 * To make the translation possible (and fast) we use a hash table of 1857 * TDs currently in the schedule. The physical address is used as the 1858 * hash value. 1859 */ 1860 1861 #define HASH(a) (((a) >> 4) % OHCI_HASH_SIZE) 1862 /* Called at splusb() */ 1863 void 1864 ohci_hash_add_td(ohci_softc_t *sc, ohci_soft_td_t *std) 1865 { 1866 int h = HASH(std->physaddr); 1867 1868 SPLUSBCHECK; 1869 1870 LIST_INSERT_HEAD(&sc->sc_hash_tds[h], std, hnext); 1871 } 1872 1873 /* Called at splusb() */ 1874 void 1875 ohci_hash_rem_td(ohci_softc_t *sc, ohci_soft_td_t *std) 1876 { 1877 SPLUSBCHECK; 1878 1879 LIST_REMOVE(std, hnext); 1880 } 1881 1882 ohci_soft_td_t * 1883 ohci_hash_find_td(ohci_softc_t *sc, ohci_physaddr_t a) 1884 { 1885 int h = HASH(a); 1886 ohci_soft_td_t *std; 1887 1888 for (std = LIST_FIRST(&sc->sc_hash_tds[h]); 1889 std != NULL; 1890 std = LIST_NEXT(std, hnext)) 1891 if (std->physaddr == a) 1892 return (std); 1893 return (NULL); 1894 } 1895 1896 /* Called at splusb() */ 1897 void 1898 ohci_hash_add_itd(ohci_softc_t *sc, ohci_soft_itd_t *sitd) 1899 { 1900 int h = HASH(sitd->physaddr); 1901 1902 SPLUSBCHECK; 1903 1904 DPRINTFN(10,("ohci_hash_add_itd: sitd=%p physaddr=0x%08lx\n", 1905 sitd, (u_long)sitd->physaddr)); 1906 1907 LIST_INSERT_HEAD(&sc->sc_hash_itds[h], sitd, hnext); 1908 } 1909 1910 /* Called at splusb() */ 1911 void 1912 ohci_hash_rem_itd(ohci_softc_t *sc, ohci_soft_itd_t *sitd) 1913 { 1914 SPLUSBCHECK; 1915 1916 DPRINTFN(10,("ohci_hash_rem_itd: sitd=%p physaddr=0x%08lx\n", 1917 sitd, (u_long)sitd->physaddr)); 1918 1919 LIST_REMOVE(sitd, hnext); 1920 } 1921 1922 ohci_soft_itd_t * 1923 ohci_hash_find_itd(ohci_softc_t *sc, ohci_physaddr_t a) 1924 { 1925 int h = HASH(a); 1926 ohci_soft_itd_t *sitd; 1927 1928 for (sitd = LIST_FIRST(&sc->sc_hash_itds[h]); 1929 sitd != NULL; 1930 sitd = LIST_NEXT(sitd, hnext)) 1931 if (sitd->physaddr == a) 1932 return (sitd); 1933 return (NULL); 1934 } 1935 1936 void 1937 ohci_timeout(void *addr) 1938 { 1939 struct ohci_xfer *oxfer = addr; 1940 struct ohci_pipe *opipe = (struct ohci_pipe *)oxfer->xfer.pipe; 1941 ohci_softc_t *sc = opipe->pipe.device->bus->hci_private; 1942 1943 DPRINTF(("ohci_timeout: oxfer=%p\n", oxfer)); 1944 1945 if (sc->sc_dying) { 1946 ohci_abort_xfer(&oxfer->xfer, USBD_TIMEOUT); 1947 return; 1948 } 1949 1950 /* Execute the abort in a process context. */ 1951 usb_init_task(&oxfer->abort_task, ohci_timeout_task, addr); 1952 usb_add_task(oxfer->xfer.pipe->device, &oxfer->abort_task, 1953 USB_TASKQ_HC); 1954 } 1955 1956 void 1957 ohci_timeout_task(void *addr) 1958 { 1959 usbd_xfer_handle xfer = addr; 1960 int s; 1961 1962 DPRINTF(("ohci_timeout_task: xfer=%p\n", xfer)); 1963 1964 s = splusb(); 1965 ohci_abort_xfer(xfer, USBD_TIMEOUT); 1966 splx(s); 1967 } 1968 1969 #ifdef OHCI_DEBUG 1970 void 1971 ohci_dump_tds(ohci_softc_t *sc, ohci_soft_td_t *std) 1972 { 1973 for (; std; std = std->nexttd) 1974 ohci_dump_td(sc, std); 1975 } 1976 1977 void 1978 ohci_dump_td(ohci_softc_t *sc, ohci_soft_td_t *std) 1979 { 1980 char sbuf[128]; 1981 1982 usb_syncmem(&std->dma, std->offs, sizeof(std->td), 1983 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 1984 snprintb(sbuf, sizeof(sbuf), 1985 "\20\23R\24OUT\25IN\31TOG1\32SETTOGGLE", 1986 (u_int32_t)O32TOH(std->td.td_flags)); 1987 printf("TD(%p) at %08lx: %s delay=%d ec=%d cc=%d\ncbp=0x%08lx " 1988 "nexttd=0x%08lx be=0x%08lx\n", 1989 std, (u_long)std->physaddr, sbuf, 1990 OHCI_TD_GET_DI(O32TOH(std->td.td_flags)), 1991 OHCI_TD_GET_EC(O32TOH(std->td.td_flags)), 1992 OHCI_TD_GET_CC(O32TOH(std->td.td_flags)), 1993 (u_long)O32TOH(std->td.td_cbp), 1994 (u_long)O32TOH(std->td.td_nexttd), 1995 (u_long)O32TOH(std->td.td_be)); 1996 } 1997 1998 void 1999 ohci_dump_itd(ohci_softc_t *sc, ohci_soft_itd_t *sitd) 2000 { 2001 int i; 2002 2003 usb_syncmem(&sitd->dma, sitd->offs, sizeof(sitd->itd), 2004 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 2005 printf("ITD(%p) at %08lx: sf=%d di=%d fc=%d cc=%d\n" 2006 "bp0=0x%08lx next=0x%08lx be=0x%08lx\n", 2007 sitd, (u_long)sitd->physaddr, 2008 OHCI_ITD_GET_SF(O32TOH(sitd->itd.itd_flags)), 2009 OHCI_ITD_GET_DI(O32TOH(sitd->itd.itd_flags)), 2010 OHCI_ITD_GET_FC(O32TOH(sitd->itd.itd_flags)), 2011 OHCI_ITD_GET_CC(O32TOH(sitd->itd.itd_flags)), 2012 (u_long)O32TOH(sitd->itd.itd_bp0), 2013 (u_long)O32TOH(sitd->itd.itd_nextitd), 2014 (u_long)O32TOH(sitd->itd.itd_be)); 2015 for (i = 0; i < OHCI_ITD_NOFFSET; i++) 2016 printf("offs[%d]=0x%04x ", i, 2017 (u_int)O16TOH(sitd->itd.itd_offset[i])); 2018 printf("\n"); 2019 } 2020 2021 void 2022 ohci_dump_itds(ohci_softc_t *sc, ohci_soft_itd_t *sitd) 2023 { 2024 for (; sitd; sitd = sitd->nextitd) 2025 ohci_dump_itd(sc, sitd); 2026 } 2027 2028 void 2029 ohci_dump_ed(ohci_softc_t *sc, ohci_soft_ed_t *sed) 2030 { 2031 char sbuf[128], sbuf2[128]; 2032 2033 usb_syncmem(&sed->dma, sed->offs, sizeof(sed->ed), 2034 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 2035 snprintb(sbuf, sizeof(sbuf), 2036 "\20\14OUT\15IN\16LOWSPEED\17SKIP\20ISO", 2037 (u_int32_t)O32TOH(sed->ed.ed_flags)); 2038 snprintb(sbuf2, sizeof(sbuf2), "\20\1HALT\2CARRY", 2039 (u_int32_t)O32TOH(sed->ed.ed_headp)); 2040 2041 printf("ED(%p) at 0x%08lx: addr=%d endpt=%d maxp=%d flags=%s\ntailp=0x%08lx " 2042 "headflags=%s headp=0x%08lx nexted=0x%08lx\n", 2043 sed, (u_long)sed->physaddr, 2044 OHCI_ED_GET_FA(O32TOH(sed->ed.ed_flags)), 2045 OHCI_ED_GET_EN(O32TOH(sed->ed.ed_flags)), 2046 OHCI_ED_GET_MAXP(O32TOH(sed->ed.ed_flags)), sbuf, 2047 (u_long)O32TOH(sed->ed.ed_tailp), sbuf2, 2048 (u_long)O32TOH(sed->ed.ed_headp), 2049 (u_long)O32TOH(sed->ed.ed_nexted)); 2050 } 2051 #endif 2052 2053 usbd_status 2054 ohci_open(usbd_pipe_handle pipe) 2055 { 2056 usbd_device_handle dev = pipe->device; 2057 ohci_softc_t *sc = dev->bus->hci_private; 2058 usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc; 2059 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 2060 u_int8_t addr = dev->address; 2061 u_int8_t xfertype = ed->bmAttributes & UE_XFERTYPE; 2062 ohci_soft_ed_t *sed; 2063 ohci_soft_td_t *std; 2064 ohci_soft_itd_t *sitd; 2065 ohci_physaddr_t tdphys; 2066 u_int32_t fmt; 2067 usbd_status err; 2068 int s; 2069 int ival; 2070 2071 DPRINTFN(1, ("ohci_open: pipe=%p, addr=%d, endpt=%d (%d)\n", 2072 pipe, addr, ed->bEndpointAddress, sc->sc_addr)); 2073 2074 if (sc->sc_dying) 2075 return (USBD_IOERROR); 2076 2077 std = NULL; 2078 sed = NULL; 2079 2080 if (addr == sc->sc_addr) { 2081 switch (ed->bEndpointAddress) { 2082 case USB_CONTROL_ENDPOINT: 2083 pipe->methods = &ohci_root_ctrl_methods; 2084 break; 2085 case UE_DIR_IN | OHCI_INTR_ENDPT: 2086 pipe->methods = &ohci_root_intr_methods; 2087 break; 2088 default: 2089 return (USBD_INVAL); 2090 } 2091 } else { 2092 sed = ohci_alloc_sed(sc); 2093 if (sed == NULL) 2094 goto bad0; 2095 opipe->sed = sed; 2096 if (xfertype == UE_ISOCHRONOUS) { 2097 sitd = ohci_alloc_sitd(sc); 2098 if (sitd == NULL) 2099 goto bad1; 2100 opipe->tail.itd = sitd; 2101 tdphys = sitd->physaddr; 2102 fmt = OHCI_ED_FORMAT_ISO; 2103 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN) 2104 fmt |= OHCI_ED_DIR_IN; 2105 else 2106 fmt |= OHCI_ED_DIR_OUT; 2107 } else { 2108 std = ohci_alloc_std(sc); 2109 if (std == NULL) 2110 goto bad1; 2111 opipe->tail.td = std; 2112 tdphys = std->physaddr; 2113 fmt = OHCI_ED_FORMAT_GEN | OHCI_ED_DIR_TD; 2114 } 2115 sed->ed.ed_flags = HTOO32( 2116 OHCI_ED_SET_FA(addr) | 2117 OHCI_ED_SET_EN(UE_GET_ADDR(ed->bEndpointAddress)) | 2118 (dev->speed == USB_SPEED_LOW ? OHCI_ED_SPEED : 0) | 2119 fmt | 2120 OHCI_ED_SET_MAXP(UGETW(ed->wMaxPacketSize))); 2121 sed->ed.ed_headp = sed->ed.ed_tailp = HTOO32(tdphys); 2122 usb_syncmem(&sed->dma, sed->offs, sizeof(sed->ed), 2123 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2124 2125 switch (xfertype) { 2126 case UE_CONTROL: 2127 pipe->methods = &ohci_device_ctrl_methods; 2128 err = usb_allocmem(&sc->sc_bus, 2129 sizeof(usb_device_request_t), 2130 0, &opipe->u.ctl.reqdma); 2131 if (err) 2132 goto bad; 2133 s = splusb(); 2134 ohci_add_ed(sc, sed, sc->sc_ctrl_head); 2135 splx(s); 2136 break; 2137 case UE_INTERRUPT: 2138 pipe->methods = &ohci_device_intr_methods; 2139 ival = pipe->interval; 2140 if (ival == USBD_DEFAULT_INTERVAL) 2141 ival = ed->bInterval; 2142 return (ohci_device_setintr(sc, opipe, ival)); 2143 case UE_ISOCHRONOUS: 2144 pipe->methods = &ohci_device_isoc_methods; 2145 return (ohci_setup_isoc(pipe)); 2146 case UE_BULK: 2147 pipe->methods = &ohci_device_bulk_methods; 2148 s = splusb(); 2149 ohci_add_ed(sc, sed, sc->sc_bulk_head); 2150 splx(s); 2151 break; 2152 } 2153 } 2154 return (USBD_NORMAL_COMPLETION); 2155 2156 bad: 2157 if (std != NULL) 2158 ohci_free_std(sc, std); 2159 bad1: 2160 if (sed != NULL) 2161 ohci_free_sed(sc, sed); 2162 bad0: 2163 return (USBD_NOMEM); 2164 2165 } 2166 2167 /* 2168 * Close a reqular pipe. 2169 * Assumes that there are no pending transactions. 2170 */ 2171 void 2172 ohci_close_pipe(usbd_pipe_handle pipe, ohci_soft_ed_t *head) 2173 { 2174 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 2175 ohci_softc_t *sc = pipe->device->bus->hci_private; 2176 ohci_soft_ed_t *sed = opipe->sed; 2177 int s; 2178 2179 s = splusb(); 2180 #ifdef DIAGNOSTIC 2181 sed->ed.ed_flags |= HTOO32(OHCI_ED_SKIP); 2182 if ((O32TOH(sed->ed.ed_tailp) & OHCI_HEADMASK) != 2183 (O32TOH(sed->ed.ed_headp) & OHCI_HEADMASK)) { 2184 ohci_soft_td_t *std; 2185 std = ohci_hash_find_td(sc, O32TOH(sed->ed.ed_headp)); 2186 printf("ohci_close_pipe: pipe not empty sed=%p hd=0x%x " 2187 "tl=0x%x pipe=%p, std=%p\n", sed, 2188 (int)O32TOH(sed->ed.ed_headp), 2189 (int)O32TOH(sed->ed.ed_tailp), 2190 pipe, std); 2191 #ifdef USB_DEBUG 2192 usbd_dump_pipe(&opipe->pipe); 2193 #endif 2194 #ifdef OHCI_DEBUG 2195 ohci_dump_ed(sc, sed); 2196 if (std) 2197 ohci_dump_td(sc, std); 2198 #endif 2199 usb_delay_ms(&sc->sc_bus, 2); 2200 if ((O32TOH(sed->ed.ed_tailp) & OHCI_HEADMASK) != 2201 (O32TOH(sed->ed.ed_headp) & OHCI_HEADMASK)) 2202 printf("ohci_close_pipe: pipe still not empty\n"); 2203 } 2204 #endif 2205 ohci_rem_ed(sed, head); 2206 /* Make sure the host controller is not touching this ED */ 2207 usb_delay_ms(&sc->sc_bus, 1); 2208 splx(s); 2209 ohci_free_sed(sc, opipe->sed); 2210 } 2211 2212 /* 2213 * Abort a device request. 2214 * If this routine is called at splusb() it guarantees that the request 2215 * will be removed from the hardware scheduling and that the callback 2216 * for it will be called with USBD_CANCELLED status. 2217 * It's impossible to guarantee that the requested transfer will not 2218 * have happened since the hardware runs concurrently. 2219 * If the transaction has already happened we rely on the ordinary 2220 * interrupt processing to process it. 2221 */ 2222 void 2223 ohci_abort_xfer(usbd_xfer_handle xfer, usbd_status status) 2224 { 2225 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 2226 ohci_softc_t *sc = opipe->pipe.device->bus->hci_private; 2227 ohci_soft_ed_t *sed = opipe->sed; 2228 ohci_soft_td_t *p, *n; 2229 ohci_physaddr_t headp; 2230 int s, hit; 2231 int wake; 2232 2233 DPRINTF(("ohci_abort_xfer: xfer=%p pipe=%p sed=%p\n", xfer, opipe,sed)); 2234 2235 if (sc->sc_dying) { 2236 /* If we're dying, just do the software part. */ 2237 s = splusb(); 2238 xfer->status = status; /* make software ignore it */ 2239 usb_uncallout(xfer->timeout_handle, ohci_timeout, xfer); 2240 usb_transfer_complete(xfer); 2241 splx(s); 2242 return; 2243 } 2244 2245 if (xfer->device->bus->intr_context || !curproc) 2246 panic("ohci_abort_xfer: not in process context"); 2247 2248 /* 2249 * If an abort is already in progress then just wait for it to 2250 * complete and return. 2251 */ 2252 if (xfer->hcflags & UXFER_ABORTING) { 2253 DPRINTFN(2, ("ohci_abort_xfer: already aborting\n")); 2254 #ifdef DIAGNOSTIC 2255 if (status == USBD_TIMEOUT) 2256 printf("0hci_abort_xfer: TIMEOUT while aborting\n"); 2257 #endif 2258 /* Override the status which might be USBD_TIMEOUT. */ 2259 xfer->status = status; 2260 DPRINTFN(2, ("ohci_abort_xfer: waiting for abort to finish\n")); 2261 xfer->hcflags |= UXFER_ABORTWAIT; 2262 while (xfer->hcflags & UXFER_ABORTING) 2263 tsleep(&xfer->hcflags, PZERO, "ohciaw", 0); 2264 return; 2265 } 2266 xfer->hcflags |= UXFER_ABORTING; 2267 2268 /* 2269 * Step 1: Make interrupt routine and hardware ignore xfer. 2270 */ 2271 s = splusb(); 2272 xfer->status = status; /* make software ignore it */ 2273 usb_uncallout(xfer->timeout_handle, ohci_timeout, xfer); 2274 splx(s); 2275 DPRINTFN(1,("ohci_abort_xfer: stop ed=%p\n", sed)); 2276 usb_syncmem(&sed->dma, sed->offs + offsetof(ohci_ed_t, ed_flags), 2277 sizeof(sed->ed.ed_flags), 2278 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 2279 sed->ed.ed_flags |= HTOO32(OHCI_ED_SKIP); /* force hardware skip */ 2280 usb_syncmem(&sed->dma, sed->offs + offsetof(ohci_ed_t, ed_flags), 2281 sizeof(sed->ed.ed_flags), 2282 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2283 2284 /* 2285 * Step 2: Wait until we know hardware has finished any possible 2286 * use of the xfer. Also make sure the soft interrupt routine 2287 * has run. 2288 */ 2289 usb_delay_ms(opipe->pipe.device->bus, 20); /* Hardware finishes in 1ms */ 2290 s = splusb(); 2291 #ifdef USB_USE_SOFTINTR 2292 sc->sc_softwake = 1; 2293 #endif /* USB_USE_SOFTINTR */ 2294 usb_schedsoftintr(&sc->sc_bus); 2295 #ifdef USB_USE_SOFTINTR 2296 tsleep(&sc->sc_softwake, PZERO, "ohciab", 0); 2297 #endif /* USB_USE_SOFTINTR */ 2298 splx(s); 2299 2300 /* 2301 * Step 3: Remove any vestiges of the xfer from the hardware. 2302 * The complication here is that the hardware may have executed 2303 * beyond the xfer we're trying to abort. So as we're scanning 2304 * the TDs of this xfer we check if the hardware points to 2305 * any of them. 2306 */ 2307 s = splusb(); /* XXX why? */ 2308 p = xfer->hcpriv; 2309 #ifdef DIAGNOSTIC 2310 if (p == NULL) { 2311 xfer->hcflags &= ~UXFER_ABORTING; /* XXX */ 2312 splx(s); 2313 printf("ohci_abort_xfer: hcpriv is NULL\n"); 2314 return; 2315 } 2316 #endif 2317 #ifdef OHCI_DEBUG 2318 if (ohcidebug > 1) { 2319 DPRINTF(("ohci_abort_xfer: sed=\n")); 2320 ohci_dump_ed(sc, sed); 2321 ohci_dump_tds(sc, p); 2322 } 2323 #endif 2324 headp = O32TOH(sed->ed.ed_headp) & OHCI_HEADMASK; 2325 hit = 0; 2326 for (; p->xfer == xfer; p = n) { 2327 hit |= headp == p->physaddr; 2328 n = p->nexttd; 2329 ohci_free_std(sc, p); 2330 } 2331 /* Zap headp register if hardware pointed inside the xfer. */ 2332 if (hit) { 2333 DPRINTFN(1,("ohci_abort_xfer: set hd=0x%08x, tl=0x%08x\n", 2334 (int)p->physaddr, (int)O32TOH(sed->ed.ed_tailp))); 2335 sed->ed.ed_headp = HTOO32(p->physaddr); /* unlink TDs */ 2336 usb_syncmem(&sed->dma, 2337 sed->offs + offsetof(ohci_ed_t, ed_headp), 2338 sizeof(sed->ed.ed_headp), 2339 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2340 } else { 2341 DPRINTFN(1,("ohci_abort_xfer: no hit\n")); 2342 } 2343 2344 /* 2345 * Step 4: Turn on hardware again. 2346 */ 2347 usb_syncmem(&sed->dma, sed->offs + offsetof(ohci_ed_t, ed_flags), 2348 sizeof(sed->ed.ed_flags), 2349 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 2350 sed->ed.ed_flags &= HTOO32(~OHCI_ED_SKIP); /* remove hardware skip */ 2351 usb_syncmem(&sed->dma, sed->offs + offsetof(ohci_ed_t, ed_flags), 2352 sizeof(sed->ed.ed_flags), 2353 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2354 2355 /* 2356 * Step 5: Execute callback. 2357 */ 2358 wake = xfer->hcflags & UXFER_ABORTWAIT; 2359 xfer->hcflags &= ~(UXFER_ABORTING | UXFER_ABORTWAIT); 2360 usb_transfer_complete(xfer); 2361 if (wake) 2362 wakeup(&xfer->hcflags); 2363 2364 splx(s); 2365 } 2366 2367 /* 2368 * Data structures and routines to emulate the root hub. 2369 */ 2370 Static usb_device_descriptor_t ohci_devd = { 2371 USB_DEVICE_DESCRIPTOR_SIZE, 2372 UDESC_DEVICE, /* type */ 2373 {0x00, 0x01}, /* USB version */ 2374 UDCLASS_HUB, /* class */ 2375 UDSUBCLASS_HUB, /* subclass */ 2376 UDPROTO_FSHUB, /* protocol */ 2377 64, /* max packet */ 2378 {0},{0},{0x00,0x01}, /* device id */ 2379 1,2,0, /* string indicies */ 2380 1 /* # of configurations */ 2381 }; 2382 2383 Static const usb_config_descriptor_t ohci_confd = { 2384 USB_CONFIG_DESCRIPTOR_SIZE, 2385 UDESC_CONFIG, 2386 {USB_CONFIG_DESCRIPTOR_SIZE + 2387 USB_INTERFACE_DESCRIPTOR_SIZE + 2388 USB_ENDPOINT_DESCRIPTOR_SIZE}, 2389 1, 2390 1, 2391 0, 2392 UC_ATTR_MBO | UC_SELF_POWERED, 2393 0 /* max power */ 2394 }; 2395 2396 Static const usb_interface_descriptor_t ohci_ifcd = { 2397 USB_INTERFACE_DESCRIPTOR_SIZE, 2398 UDESC_INTERFACE, 2399 0, 2400 0, 2401 1, 2402 UICLASS_HUB, 2403 UISUBCLASS_HUB, 2404 UIPROTO_FSHUB, 2405 0 2406 }; 2407 2408 Static const usb_endpoint_descriptor_t ohci_endpd = { 2409 .bLength = USB_ENDPOINT_DESCRIPTOR_SIZE, 2410 .bDescriptorType = UDESC_ENDPOINT, 2411 .bEndpointAddress = UE_DIR_IN | OHCI_INTR_ENDPT, 2412 .bmAttributes = UE_INTERRUPT, 2413 .wMaxPacketSize = {8, 0}, /* max packet */ 2414 .bInterval = 255, 2415 }; 2416 2417 Static const usb_hub_descriptor_t ohci_hubd = { 2418 .bDescLength = USB_HUB_DESCRIPTOR_SIZE, 2419 .bDescriptorType = UDESC_HUB, 2420 }; 2421 2422 /* 2423 * Simulate a hardware hub by handling all the necessary requests. 2424 */ 2425 Static usbd_status 2426 ohci_root_ctrl_transfer(usbd_xfer_handle xfer) 2427 { 2428 usbd_status err; 2429 2430 /* Insert last in queue. */ 2431 err = usb_insert_transfer(xfer); 2432 if (err) 2433 return (err); 2434 2435 /* Pipe isn't running, start first */ 2436 return (ohci_root_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 2437 } 2438 2439 Static usbd_status 2440 ohci_root_ctrl_start(usbd_xfer_handle xfer) 2441 { 2442 ohci_softc_t *sc = xfer->pipe->device->bus->hci_private; 2443 usb_device_request_t *req; 2444 void *buf = NULL; 2445 int port, i; 2446 int s, len, value, index, l, totlen = 0; 2447 usb_port_status_t ps; 2448 usb_hub_descriptor_t hubd; 2449 usbd_status err; 2450 u_int32_t v; 2451 2452 if (sc->sc_dying) 2453 return (USBD_IOERROR); 2454 2455 #ifdef DIAGNOSTIC 2456 if (!(xfer->rqflags & URQ_REQUEST)) 2457 /* XXX panic */ 2458 return (USBD_INVAL); 2459 #endif 2460 req = &xfer->request; 2461 2462 DPRINTFN(4,("ohci_root_ctrl_control type=0x%02x request=%02x\n", 2463 req->bmRequestType, req->bRequest)); 2464 2465 len = UGETW(req->wLength); 2466 value = UGETW(req->wValue); 2467 index = UGETW(req->wIndex); 2468 2469 if (len != 0) 2470 buf = KERNADDR(&xfer->dmabuf, 0); 2471 2472 #define C(x,y) ((x) | ((y) << 8)) 2473 switch(C(req->bRequest, req->bmRequestType)) { 2474 case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE): 2475 case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE): 2476 case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT): 2477 /* 2478 * DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops 2479 * for the integrated root hub. 2480 */ 2481 break; 2482 case C(UR_GET_CONFIG, UT_READ_DEVICE): 2483 if (len > 0) { 2484 *(u_int8_t *)buf = sc->sc_conf; 2485 totlen = 1; 2486 } 2487 break; 2488 case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): 2489 DPRINTFN(8,("ohci_root_ctrl_control wValue=0x%04x\n", value)); 2490 if (len == 0) 2491 break; 2492 switch(value >> 8) { 2493 case UDESC_DEVICE: 2494 if ((value & 0xff) != 0) { 2495 err = USBD_IOERROR; 2496 goto ret; 2497 } 2498 totlen = l = min(len, USB_DEVICE_DESCRIPTOR_SIZE); 2499 USETW(ohci_devd.idVendor, sc->sc_id_vendor); 2500 memcpy(buf, &ohci_devd, l); 2501 break; 2502 case UDESC_CONFIG: 2503 if ((value & 0xff) != 0) { 2504 err = USBD_IOERROR; 2505 goto ret; 2506 } 2507 totlen = l = min(len, USB_CONFIG_DESCRIPTOR_SIZE); 2508 memcpy(buf, &ohci_confd, l); 2509 buf = (char *)buf + l; 2510 len -= l; 2511 l = min(len, USB_INTERFACE_DESCRIPTOR_SIZE); 2512 totlen += l; 2513 memcpy(buf, &ohci_ifcd, l); 2514 buf = (char *)buf + l; 2515 len -= l; 2516 l = min(len, USB_ENDPOINT_DESCRIPTOR_SIZE); 2517 totlen += l; 2518 memcpy(buf, &ohci_endpd, l); 2519 break; 2520 case UDESC_STRING: 2521 #define sd ((usb_string_descriptor_t *)buf) 2522 switch (value & 0xff) { 2523 case 0: /* Language table */ 2524 totlen = usb_makelangtbl(sd, len); 2525 break; 2526 case 1: /* Vendor */ 2527 totlen = usb_makestrdesc(sd, len, 2528 sc->sc_vendor); 2529 break; 2530 case 2: /* Product */ 2531 totlen = usb_makestrdesc(sd, len, 2532 "OHCI root hub"); 2533 break; 2534 } 2535 #undef sd 2536 break; 2537 default: 2538 err = USBD_IOERROR; 2539 goto ret; 2540 } 2541 break; 2542 case C(UR_GET_INTERFACE, UT_READ_INTERFACE): 2543 if (len > 0) { 2544 *(u_int8_t *)buf = 0; 2545 totlen = 1; 2546 } 2547 break; 2548 case C(UR_GET_STATUS, UT_READ_DEVICE): 2549 if (len > 1) { 2550 USETW(((usb_status_t *)buf)->wStatus,UDS_SELF_POWERED); 2551 totlen = 2; 2552 } 2553 break; 2554 case C(UR_GET_STATUS, UT_READ_INTERFACE): 2555 case C(UR_GET_STATUS, UT_READ_ENDPOINT): 2556 if (len > 1) { 2557 USETW(((usb_status_t *)buf)->wStatus, 0); 2558 totlen = 2; 2559 } 2560 break; 2561 case C(UR_SET_ADDRESS, UT_WRITE_DEVICE): 2562 if (value >= USB_MAX_DEVICES) { 2563 err = USBD_IOERROR; 2564 goto ret; 2565 } 2566 sc->sc_addr = value; 2567 break; 2568 case C(UR_SET_CONFIG, UT_WRITE_DEVICE): 2569 if (value != 0 && value != 1) { 2570 err = USBD_IOERROR; 2571 goto ret; 2572 } 2573 sc->sc_conf = value; 2574 break; 2575 case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE): 2576 break; 2577 case C(UR_SET_FEATURE, UT_WRITE_DEVICE): 2578 case C(UR_SET_FEATURE, UT_WRITE_INTERFACE): 2579 case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT): 2580 err = USBD_IOERROR; 2581 goto ret; 2582 case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE): 2583 break; 2584 case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT): 2585 break; 2586 /* Hub requests */ 2587 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): 2588 break; 2589 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): 2590 DPRINTFN(8, ("ohci_root_ctrl_control: UR_CLEAR_PORT_FEATURE " 2591 "port=%d feature=%d\n", 2592 index, value)); 2593 if (index < 1 || index > sc->sc_noport) { 2594 err = USBD_IOERROR; 2595 goto ret; 2596 } 2597 port = OHCI_RH_PORT_STATUS(index); 2598 switch(value) { 2599 case UHF_PORT_ENABLE: 2600 OWRITE4(sc, port, UPS_CURRENT_CONNECT_STATUS); 2601 break; 2602 case UHF_PORT_SUSPEND: 2603 OWRITE4(sc, port, UPS_OVERCURRENT_INDICATOR); 2604 break; 2605 case UHF_PORT_POWER: 2606 /* Yes, writing to the LOW_SPEED bit clears power. */ 2607 OWRITE4(sc, port, UPS_LOW_SPEED); 2608 break; 2609 case UHF_C_PORT_CONNECTION: 2610 OWRITE4(sc, port, UPS_C_CONNECT_STATUS << 16); 2611 break; 2612 case UHF_C_PORT_ENABLE: 2613 OWRITE4(sc, port, UPS_C_PORT_ENABLED << 16); 2614 break; 2615 case UHF_C_PORT_SUSPEND: 2616 OWRITE4(sc, port, UPS_C_SUSPEND << 16); 2617 break; 2618 case UHF_C_PORT_OVER_CURRENT: 2619 OWRITE4(sc, port, UPS_C_OVERCURRENT_INDICATOR << 16); 2620 break; 2621 case UHF_C_PORT_RESET: 2622 OWRITE4(sc, port, UPS_C_PORT_RESET << 16); 2623 break; 2624 default: 2625 err = USBD_IOERROR; 2626 goto ret; 2627 } 2628 switch(value) { 2629 case UHF_C_PORT_CONNECTION: 2630 case UHF_C_PORT_ENABLE: 2631 case UHF_C_PORT_SUSPEND: 2632 case UHF_C_PORT_OVER_CURRENT: 2633 case UHF_C_PORT_RESET: 2634 /* Enable RHSC interrupt if condition is cleared. */ 2635 if ((OREAD4(sc, port) >> 16) == 0) 2636 ohci_rhsc_enable(sc); 2637 break; 2638 default: 2639 break; 2640 } 2641 break; 2642 case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): 2643 if (len == 0) 2644 break; 2645 if ((value & 0xff) != 0) { 2646 err = USBD_IOERROR; 2647 goto ret; 2648 } 2649 v = OREAD4(sc, OHCI_RH_DESCRIPTOR_A); 2650 hubd = ohci_hubd; 2651 hubd.bNbrPorts = sc->sc_noport; 2652 USETW(hubd.wHubCharacteristics, 2653 (v & OHCI_NPS ? UHD_PWR_NO_SWITCH : 2654 v & OHCI_PSM ? UHD_PWR_GANGED : UHD_PWR_INDIVIDUAL) 2655 /* XXX overcurrent */ 2656 ); 2657 hubd.bPwrOn2PwrGood = OHCI_GET_POTPGT(v); 2658 v = OREAD4(sc, OHCI_RH_DESCRIPTOR_B); 2659 for (i = 0, l = sc->sc_noport; l > 0; i++, l -= 8, v >>= 8) 2660 hubd.DeviceRemovable[i++] = (u_int8_t)v; 2661 hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE + i; 2662 l = min(len, hubd.bDescLength); 2663 totlen = l; 2664 memcpy(buf, &hubd, l); 2665 break; 2666 case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): 2667 if (len != 4) { 2668 err = USBD_IOERROR; 2669 goto ret; 2670 } 2671 memset(buf, 0, len); /* ? XXX */ 2672 totlen = len; 2673 break; 2674 case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): 2675 DPRINTFN(8,("ohci_root_ctrl_transfer: get port status i=%d\n", 2676 index)); 2677 if (index < 1 || index > sc->sc_noport) { 2678 err = USBD_IOERROR; 2679 goto ret; 2680 } 2681 if (len != 4) { 2682 err = USBD_IOERROR; 2683 goto ret; 2684 } 2685 v = OREAD4(sc, OHCI_RH_PORT_STATUS(index)); 2686 DPRINTFN(8,("ohci_root_ctrl_transfer: port status=0x%04x\n", 2687 v)); 2688 USETW(ps.wPortStatus, v); 2689 USETW(ps.wPortChange, v >> 16); 2690 l = min(len, sizeof ps); 2691 memcpy(buf, &ps, l); 2692 totlen = l; 2693 break; 2694 case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): 2695 err = USBD_IOERROR; 2696 goto ret; 2697 case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): 2698 break; 2699 case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): 2700 if (index < 1 || index > sc->sc_noport) { 2701 err = USBD_IOERROR; 2702 goto ret; 2703 } 2704 port = OHCI_RH_PORT_STATUS(index); 2705 switch(value) { 2706 case UHF_PORT_ENABLE: 2707 OWRITE4(sc, port, UPS_PORT_ENABLED); 2708 break; 2709 case UHF_PORT_SUSPEND: 2710 OWRITE4(sc, port, UPS_SUSPEND); 2711 break; 2712 case UHF_PORT_RESET: 2713 DPRINTFN(5,("ohci_root_ctrl_transfer: reset port %d\n", 2714 index)); 2715 OWRITE4(sc, port, UPS_RESET); 2716 for (i = 0; i < 5; i++) { 2717 usb_delay_ms(&sc->sc_bus, 2718 USB_PORT_ROOT_RESET_DELAY); 2719 if (sc->sc_dying) { 2720 err = USBD_IOERROR; 2721 goto ret; 2722 } 2723 if ((OREAD4(sc, port) & UPS_RESET) == 0) 2724 break; 2725 } 2726 DPRINTFN(8,("ohci port %d reset, status = 0x%04x\n", 2727 index, OREAD4(sc, port))); 2728 break; 2729 case UHF_PORT_POWER: 2730 DPRINTFN(2,("ohci_root_ctrl_transfer: set port power " 2731 "%d\n", index)); 2732 OWRITE4(sc, port, UPS_PORT_POWER); 2733 break; 2734 default: 2735 err = USBD_IOERROR; 2736 goto ret; 2737 } 2738 break; 2739 default: 2740 err = USBD_IOERROR; 2741 goto ret; 2742 } 2743 xfer->actlen = totlen; 2744 err = USBD_NORMAL_COMPLETION; 2745 ret: 2746 xfer->status = err; 2747 s = splusb(); 2748 usb_transfer_complete(xfer); 2749 splx(s); 2750 return (USBD_IN_PROGRESS); 2751 } 2752 2753 /* Abort a root control request. */ 2754 Static void 2755 ohci_root_ctrl_abort(usbd_xfer_handle xfer) 2756 { 2757 /* Nothing to do, all transfers are synchronous. */ 2758 } 2759 2760 /* Close the root pipe. */ 2761 Static void 2762 ohci_root_ctrl_close(usbd_pipe_handle pipe) 2763 { 2764 DPRINTF(("ohci_root_ctrl_close\n")); 2765 /* Nothing to do. */ 2766 } 2767 2768 Static usbd_status 2769 ohci_root_intr_transfer(usbd_xfer_handle xfer) 2770 { 2771 usbd_status err; 2772 2773 /* Insert last in queue. */ 2774 err = usb_insert_transfer(xfer); 2775 if (err) 2776 return (err); 2777 2778 /* Pipe isn't running, start first */ 2779 return (ohci_root_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 2780 } 2781 2782 Static usbd_status 2783 ohci_root_intr_start(usbd_xfer_handle xfer) 2784 { 2785 usbd_pipe_handle pipe = xfer->pipe; 2786 ohci_softc_t *sc = pipe->device->bus->hci_private; 2787 2788 if (sc->sc_dying) 2789 return (USBD_IOERROR); 2790 2791 sc->sc_intrxfer = xfer; 2792 2793 return (USBD_IN_PROGRESS); 2794 } 2795 2796 /* Abort a root interrupt request. */ 2797 Static void 2798 ohci_root_intr_abort(usbd_xfer_handle xfer) 2799 { 2800 int s; 2801 2802 if (xfer->pipe->intrxfer == xfer) { 2803 DPRINTF(("ohci_root_intr_abort: remove\n")); 2804 xfer->pipe->intrxfer = NULL; 2805 } 2806 xfer->status = USBD_CANCELLED; 2807 s = splusb(); 2808 usb_transfer_complete(xfer); 2809 splx(s); 2810 } 2811 2812 /* Close the root pipe. */ 2813 Static void 2814 ohci_root_intr_close(usbd_pipe_handle pipe) 2815 { 2816 ohci_softc_t *sc = pipe->device->bus->hci_private; 2817 2818 DPRINTF(("ohci_root_intr_close\n")); 2819 2820 sc->sc_intrxfer = NULL; 2821 } 2822 2823 /************************/ 2824 2825 Static usbd_status 2826 ohci_device_ctrl_transfer(usbd_xfer_handle xfer) 2827 { 2828 usbd_status err; 2829 2830 /* Insert last in queue. */ 2831 err = usb_insert_transfer(xfer); 2832 if (err) 2833 return (err); 2834 2835 /* Pipe isn't running, start first */ 2836 return (ohci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 2837 } 2838 2839 Static usbd_status 2840 ohci_device_ctrl_start(usbd_xfer_handle xfer) 2841 { 2842 ohci_softc_t *sc = xfer->pipe->device->bus->hci_private; 2843 usbd_status err; 2844 2845 if (sc->sc_dying) 2846 return (USBD_IOERROR); 2847 2848 #ifdef DIAGNOSTIC 2849 if (!(xfer->rqflags & URQ_REQUEST)) { 2850 /* XXX panic */ 2851 printf("ohci_device_ctrl_transfer: not a request\n"); 2852 return (USBD_INVAL); 2853 } 2854 #endif 2855 2856 err = ohci_device_request(xfer); 2857 if (err) 2858 return (err); 2859 2860 if (sc->sc_bus.use_polling) 2861 ohci_waitintr(sc, xfer); 2862 return (USBD_IN_PROGRESS); 2863 } 2864 2865 /* Abort a device control request. */ 2866 Static void 2867 ohci_device_ctrl_abort(usbd_xfer_handle xfer) 2868 { 2869 DPRINTF(("ohci_device_ctrl_abort: xfer=%p\n", xfer)); 2870 ohci_abort_xfer(xfer, USBD_CANCELLED); 2871 } 2872 2873 /* Close a device control pipe. */ 2874 Static void 2875 ohci_device_ctrl_close(usbd_pipe_handle pipe) 2876 { 2877 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 2878 ohci_softc_t *sc = pipe->device->bus->hci_private; 2879 2880 DPRINTF(("ohci_device_ctrl_close: pipe=%p\n", pipe)); 2881 ohci_close_pipe(pipe, sc->sc_ctrl_head); 2882 ohci_free_std(sc, opipe->tail.td); 2883 } 2884 2885 /************************/ 2886 2887 Static void 2888 ohci_device_clear_toggle(usbd_pipe_handle pipe) 2889 { 2890 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 2891 ohci_softc_t *sc = pipe->device->bus->hci_private; 2892 2893 opipe->sed->ed.ed_headp &= HTOO32(~OHCI_TOGGLECARRY); 2894 } 2895 2896 Static void 2897 ohci_noop(usbd_pipe_handle pipe) 2898 { 2899 } 2900 2901 Static usbd_status 2902 ohci_device_bulk_transfer(usbd_xfer_handle xfer) 2903 { 2904 usbd_status err; 2905 2906 /* Insert last in queue. */ 2907 err = usb_insert_transfer(xfer); 2908 if (err) 2909 return (err); 2910 2911 /* Pipe isn't running, start first */ 2912 return (ohci_device_bulk_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 2913 } 2914 2915 Static usbd_status 2916 ohci_device_bulk_start(usbd_xfer_handle xfer) 2917 { 2918 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 2919 usbd_device_handle dev = opipe->pipe.device; 2920 ohci_softc_t *sc = dev->bus->hci_private; 2921 int addr = dev->address; 2922 ohci_soft_td_t *data, *tail, *tdp; 2923 ohci_soft_ed_t *sed; 2924 int s, len, isread, endpt; 2925 usbd_status err; 2926 2927 if (sc->sc_dying) 2928 return (USBD_IOERROR); 2929 2930 #ifdef DIAGNOSTIC 2931 if (xfer->rqflags & URQ_REQUEST) { 2932 /* XXX panic */ 2933 printf("ohci_device_bulk_start: a request\n"); 2934 return (USBD_INVAL); 2935 } 2936 #endif 2937 2938 len = xfer->length; 2939 endpt = xfer->pipe->endpoint->edesc->bEndpointAddress; 2940 isread = UE_GET_DIR(endpt) == UE_DIR_IN; 2941 sed = opipe->sed; 2942 2943 DPRINTFN(4,("ohci_device_bulk_start: xfer=%p len=%d isread=%d " 2944 "flags=%d endpt=%d\n", xfer, len, isread, xfer->flags, 2945 endpt)); 2946 2947 opipe->u.bulk.isread = isread; 2948 opipe->u.bulk.length = len; 2949 2950 usb_syncmem(&sed->dma, sed->offs, sizeof(sed->ed), 2951 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 2952 /* Update device address */ 2953 sed->ed.ed_flags = HTOO32( 2954 (O32TOH(sed->ed.ed_flags) & ~OHCI_ED_ADDRMASK) | 2955 OHCI_ED_SET_FA(addr)); 2956 2957 /* Allocate a chain of new TDs (including a new tail). */ 2958 data = opipe->tail.td; 2959 err = ohci_alloc_std_chain(opipe, sc, len, isread, xfer, 2960 data, &tail); 2961 /* We want interrupt at the end of the transfer. */ 2962 tail->td.td_flags &= HTOO32(~OHCI_TD_INTR_MASK); 2963 tail->td.td_flags |= HTOO32(OHCI_TD_SET_DI(1)); 2964 tail->flags |= OHCI_CALL_DONE; 2965 tail = tail->nexttd; /* point at sentinel */ 2966 usb_syncmem(&tail->dma, tail->offs + offsetof(ohci_td_t, td_flags), 2967 sizeof(tail->td.td_flags), 2968 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2969 if (err) 2970 return (err); 2971 2972 tail->xfer = NULL; 2973 xfer->hcpriv = data; 2974 2975 DPRINTFN(4,("ohci_device_bulk_start: ed_flags=0x%08x td_flags=0x%08x " 2976 "td_cbp=0x%08x td_be=0x%08x\n", 2977 (int)O32TOH(sed->ed.ed_flags), 2978 (int)O32TOH(data->td.td_flags), 2979 (int)O32TOH(data->td.td_cbp), 2980 (int)O32TOH(data->td.td_be))); 2981 2982 #ifdef OHCI_DEBUG 2983 if (ohcidebug > 5) { 2984 ohci_dump_ed(sc, sed); 2985 ohci_dump_tds(sc, data); 2986 } 2987 #endif 2988 2989 /* Insert ED in schedule */ 2990 s = splusb(); 2991 for (tdp = data; tdp != tail; tdp = tdp->nexttd) { 2992 tdp->xfer = xfer; 2993 } 2994 sed->ed.ed_tailp = HTOO32(tail->physaddr); 2995 opipe->tail.td = tail; 2996 sed->ed.ed_flags &= HTOO32(~OHCI_ED_SKIP); 2997 usb_syncmem(&sed->dma, sed->offs, sizeof(sed->ed), 2998 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2999 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_BLF); 3000 if (xfer->timeout && !sc->sc_bus.use_polling) { 3001 usb_callout(xfer->timeout_handle, mstohz(xfer->timeout), 3002 ohci_timeout, xfer); 3003 } 3004 3005 #if 0 3006 /* This goes wrong if we are too slow. */ 3007 if (ohcidebug > 10) { 3008 delay(10000); 3009 DPRINTF(("ohci_device_intr_transfer: status=%x\n", 3010 OREAD4(sc, OHCI_COMMAND_STATUS))); 3011 ohci_dump_ed(sc, sed); 3012 ohci_dump_tds(sc, data); 3013 } 3014 #endif 3015 3016 splx(s); 3017 3018 return (USBD_IN_PROGRESS); 3019 } 3020 3021 Static void 3022 ohci_device_bulk_abort(usbd_xfer_handle xfer) 3023 { 3024 DPRINTF(("ohci_device_bulk_abort: xfer=%p\n", xfer)); 3025 ohci_abort_xfer(xfer, USBD_CANCELLED); 3026 } 3027 3028 /* 3029 * Close a device bulk pipe. 3030 */ 3031 Static void 3032 ohci_device_bulk_close(usbd_pipe_handle pipe) 3033 { 3034 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 3035 ohci_softc_t *sc = pipe->device->bus->hci_private; 3036 3037 DPRINTF(("ohci_device_bulk_close: pipe=%p\n", pipe)); 3038 ohci_close_pipe(pipe, sc->sc_bulk_head); 3039 ohci_free_std(sc, opipe->tail.td); 3040 } 3041 3042 /************************/ 3043 3044 Static usbd_status 3045 ohci_device_intr_transfer(usbd_xfer_handle xfer) 3046 { 3047 usbd_status err; 3048 3049 /* Insert last in queue. */ 3050 err = usb_insert_transfer(xfer); 3051 if (err) 3052 return (err); 3053 3054 /* Pipe isn't running, start first */ 3055 return (ohci_device_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 3056 } 3057 3058 Static usbd_status 3059 ohci_device_intr_start(usbd_xfer_handle xfer) 3060 { 3061 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 3062 usbd_device_handle dev = opipe->pipe.device; 3063 ohci_softc_t *sc = dev->bus->hci_private; 3064 ohci_soft_ed_t *sed = opipe->sed; 3065 ohci_soft_td_t *data, *tail; 3066 int s, len, isread, endpt; 3067 3068 if (sc->sc_dying) 3069 return (USBD_IOERROR); 3070 3071 DPRINTFN(3, ("ohci_device_intr_transfer: xfer=%p len=%d " 3072 "flags=%d priv=%p\n", 3073 xfer, xfer->length, xfer->flags, xfer->priv)); 3074 3075 #ifdef DIAGNOSTIC 3076 if (xfer->rqflags & URQ_REQUEST) 3077 panic("ohci_device_intr_transfer: a request"); 3078 #endif 3079 3080 len = xfer->length; 3081 endpt = xfer->pipe->endpoint->edesc->bEndpointAddress; 3082 isread = UE_GET_DIR(endpt) == UE_DIR_IN; 3083 3084 data = opipe->tail.td; 3085 tail = ohci_alloc_std(sc); 3086 if (tail == NULL) 3087 return (USBD_NOMEM); 3088 tail->xfer = NULL; 3089 3090 data->td.td_flags = HTOO32( 3091 isread ? OHCI_TD_IN : OHCI_TD_OUT | 3092 OHCI_TD_NOCC | 3093 OHCI_TD_SET_DI(1) | OHCI_TD_TOGGLE_CARRY); 3094 if (xfer->flags & USBD_SHORT_XFER_OK) 3095 data->td.td_flags |= HTOO32(OHCI_TD_R); 3096 data->td.td_cbp = HTOO32(DMAADDR(&xfer->dmabuf, 0)); 3097 data->nexttd = tail; 3098 data->td.td_nexttd = HTOO32(tail->physaddr); 3099 data->td.td_be = HTOO32(O32TOH(data->td.td_cbp) + len - 1); 3100 data->len = len; 3101 data->xfer = xfer; 3102 data->flags = OHCI_CALL_DONE | OHCI_ADD_LEN; 3103 usb_syncmem(&data->dma, data->offs, sizeof(data->td), 3104 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3105 xfer->hcpriv = data; 3106 3107 #ifdef OHCI_DEBUG 3108 if (ohcidebug > 5) { 3109 DPRINTF(("ohci_device_intr_transfer:\n")); 3110 ohci_dump_ed(sc, sed); 3111 ohci_dump_tds(sc, data); 3112 } 3113 #endif 3114 3115 /* Insert ED in schedule */ 3116 s = splusb(); 3117 usb_syncmem(&sed->dma, sed->offs, sizeof(sed->ed), 3118 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 3119 sed->ed.ed_tailp = HTOO32(tail->physaddr); 3120 opipe->tail.td = tail; 3121 sed->ed.ed_flags &= HTOO32(~OHCI_ED_SKIP); 3122 usb_syncmem(&sed->dma, sed->offs, sizeof(sed->ed), 3123 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3124 3125 #if 0 3126 /* 3127 * This goes horribly wrong, printing thousands of descriptors, 3128 * because false references are followed due to the fact that the 3129 * TD is gone. 3130 */ 3131 if (ohcidebug > 5) { 3132 usb_delay_ms(&sc->sc_bus, 5); 3133 DPRINTF(("ohci_device_intr_transfer: status=%x\n", 3134 OREAD4(sc, OHCI_COMMAND_STATUS))); 3135 ohci_dump_ed(sc, sed); 3136 ohci_dump_tds(sc, data); 3137 } 3138 #endif 3139 splx(s); 3140 3141 return (USBD_IN_PROGRESS); 3142 } 3143 3144 /* Abort a device control request. */ 3145 Static void 3146 ohci_device_intr_abort(usbd_xfer_handle xfer) 3147 { 3148 if (xfer->pipe->intrxfer == xfer) { 3149 DPRINTF(("ohci_device_intr_abort: remove\n")); 3150 xfer->pipe->intrxfer = NULL; 3151 } 3152 ohci_abort_xfer(xfer, USBD_CANCELLED); 3153 } 3154 3155 /* Close a device interrupt pipe. */ 3156 Static void 3157 ohci_device_intr_close(usbd_pipe_handle pipe) 3158 { 3159 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 3160 ohci_softc_t *sc = pipe->device->bus->hci_private; 3161 int nslots = opipe->u.intr.nslots; 3162 int pos = opipe->u.intr.pos; 3163 int j; 3164 ohci_soft_ed_t *p, *sed = opipe->sed; 3165 int s; 3166 3167 DPRINTFN(1,("ohci_device_intr_close: pipe=%p nslots=%d pos=%d\n", 3168 pipe, nslots, pos)); 3169 s = splusb(); 3170 usb_syncmem(&sed->dma, sed->offs, 3171 sizeof(sed->ed), BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 3172 sed->ed.ed_flags |= HTOO32(OHCI_ED_SKIP); 3173 usb_syncmem(&sed->dma, sed->offs + offsetof(ohci_ed_t, ed_flags), 3174 sizeof(sed->ed.ed_flags), 3175 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3176 if ((O32TOH(sed->ed.ed_tailp) & OHCI_HEADMASK) != 3177 (O32TOH(sed->ed.ed_headp) & OHCI_HEADMASK)) 3178 usb_delay_ms(&sc->sc_bus, 2); 3179 3180 for (p = sc->sc_eds[pos]; p && p->next != sed; p = p->next) 3181 continue; 3182 #ifdef DIAGNOSTIC 3183 if (p == NULL) 3184 panic("ohci_device_intr_close: ED not found"); 3185 #endif 3186 p->next = sed->next; 3187 p->ed.ed_nexted = sed->ed.ed_nexted; 3188 usb_syncmem(&p->dma, p->offs + offsetof(ohci_ed_t, ed_nexted), 3189 sizeof(p->ed.ed_nexted), 3190 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3191 splx(s); 3192 3193 for (j = 0; j < nslots; j++) 3194 --sc->sc_bws[(pos * nslots + j) % OHCI_NO_INTRS]; 3195 3196 ohci_free_std(sc, opipe->tail.td); 3197 ohci_free_sed(sc, opipe->sed); 3198 } 3199 3200 Static usbd_status 3201 ohci_device_setintr(ohci_softc_t *sc, struct ohci_pipe *opipe, int ival) 3202 { 3203 int i, j, s, best; 3204 u_int npoll, slow, shigh, nslots; 3205 u_int bestbw, bw; 3206 ohci_soft_ed_t *hsed, *sed = opipe->sed; 3207 3208 DPRINTFN(2, ("ohci_setintr: pipe=%p\n", opipe)); 3209 if (ival == 0) { 3210 printf("ohci_setintr: 0 interval\n"); 3211 return (USBD_INVAL); 3212 } 3213 3214 npoll = OHCI_NO_INTRS; 3215 while (npoll > ival) 3216 npoll /= 2; 3217 DPRINTFN(2, ("ohci_setintr: ival=%d npoll=%d\n", ival, npoll)); 3218 3219 /* 3220 * We now know which level in the tree the ED must go into. 3221 * Figure out which slot has most bandwidth left over. 3222 * Slots to examine: 3223 * npoll 3224 * 1 0 3225 * 2 1 2 3226 * 4 3 4 5 6 3227 * 8 7 8 9 10 11 12 13 14 3228 * N (N-1) .. (N-1+N-1) 3229 */ 3230 slow = npoll-1; 3231 shigh = slow + npoll; 3232 nslots = OHCI_NO_INTRS / npoll; 3233 for (best = i = slow, bestbw = ~0; i < shigh; i++) { 3234 bw = 0; 3235 for (j = 0; j < nslots; j++) 3236 bw += sc->sc_bws[(i * nslots + j) % OHCI_NO_INTRS]; 3237 if (bw < bestbw) { 3238 best = i; 3239 bestbw = bw; 3240 } 3241 } 3242 DPRINTFN(2, ("ohci_setintr: best=%d(%d..%d) bestbw=%d\n", 3243 best, slow, shigh, bestbw)); 3244 3245 s = splusb(); 3246 hsed = sc->sc_eds[best]; 3247 sed->next = hsed->next; 3248 usb_syncmem(&hsed->dma, hsed->offs + offsetof(ohci_ed_t, ed_flags), 3249 sizeof(hsed->ed.ed_flags), 3250 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 3251 sed->ed.ed_nexted = hsed->ed.ed_nexted; 3252 usb_syncmem(&sed->dma, sed->offs + offsetof(ohci_ed_t, ed_flags), 3253 sizeof(sed->ed.ed_flags), 3254 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3255 hsed->next = sed; 3256 hsed->ed.ed_nexted = HTOO32(sed->physaddr); 3257 usb_syncmem(&hsed->dma, hsed->offs + offsetof(ohci_ed_t, ed_flags), 3258 sizeof(hsed->ed.ed_flags), 3259 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3260 splx(s); 3261 3262 for (j = 0; j < nslots; j++) 3263 ++sc->sc_bws[(best * nslots + j) % OHCI_NO_INTRS]; 3264 opipe->u.intr.nslots = nslots; 3265 opipe->u.intr.pos = best; 3266 3267 DPRINTFN(5, ("ohci_setintr: returns %p\n", opipe)); 3268 return (USBD_NORMAL_COMPLETION); 3269 } 3270 3271 /***********************/ 3272 3273 usbd_status 3274 ohci_device_isoc_transfer(usbd_xfer_handle xfer) 3275 { 3276 usbd_status err; 3277 3278 DPRINTFN(5,("ohci_device_isoc_transfer: xfer=%p\n", xfer)); 3279 3280 /* Put it on our queue, */ 3281 err = usb_insert_transfer(xfer); 3282 3283 /* bail out on error, */ 3284 if (err && err != USBD_IN_PROGRESS) 3285 return (err); 3286 3287 /* XXX should check inuse here */ 3288 3289 /* insert into schedule, */ 3290 ohci_device_isoc_enter(xfer); 3291 3292 /* and start if the pipe wasn't running */ 3293 if (!err) 3294 ohci_device_isoc_start(SIMPLEQ_FIRST(&xfer->pipe->queue)); 3295 3296 return (err); 3297 } 3298 3299 void 3300 ohci_device_isoc_enter(usbd_xfer_handle xfer) 3301 { 3302 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 3303 usbd_device_handle dev = opipe->pipe.device; 3304 ohci_softc_t *sc = dev->bus->hci_private; 3305 ohci_soft_ed_t *sed = opipe->sed; 3306 struct iso *iso = &opipe->u.iso; 3307 ohci_soft_itd_t *sitd, *nsitd; 3308 ohci_physaddr_t buf, offs, noffs, bp0; 3309 int i, ncur, nframes; 3310 int s; 3311 3312 DPRINTFN(1,("ohci_device_isoc_enter: used=%d next=%d xfer=%p " 3313 "nframes=%d\n", 3314 iso->inuse, iso->next, xfer, xfer->nframes)); 3315 3316 if (sc->sc_dying) 3317 return; 3318 3319 if (iso->next == -1) { 3320 /* Not in use yet, schedule it a few frames ahead. */ 3321 iso->next = O32TOH(sc->sc_hcca->hcca_frame_number) + 5; 3322 DPRINTFN(2,("ohci_device_isoc_enter: start next=%d\n", 3323 iso->next)); 3324 } 3325 3326 sitd = opipe->tail.itd; 3327 buf = DMAADDR(&xfer->dmabuf, 0); 3328 bp0 = OHCI_PAGE(buf); 3329 offs = OHCI_PAGE_OFFSET(buf); 3330 nframes = xfer->nframes; 3331 xfer->hcpriv = sitd; 3332 for (i = ncur = 0; i < nframes; i++, ncur++) { 3333 noffs = offs + xfer->frlengths[i]; 3334 if (ncur == OHCI_ITD_NOFFSET || /* all offsets used */ 3335 OHCI_PAGE(buf + noffs) > bp0 + OHCI_PAGE_SIZE) { /* too many page crossings */ 3336 3337 /* Allocate next ITD */ 3338 nsitd = ohci_alloc_sitd(sc); 3339 if (nsitd == NULL) { 3340 /* XXX what now? */ 3341 printf("%s: isoc TD alloc failed\n", 3342 device_xname(sc->sc_dev)); 3343 return; 3344 } 3345 3346 /* Fill current ITD */ 3347 sitd->itd.itd_flags = HTOO32( 3348 OHCI_ITD_NOCC | 3349 OHCI_ITD_SET_SF(iso->next) | 3350 OHCI_ITD_SET_DI(6) | /* delay intr a little */ 3351 OHCI_ITD_SET_FC(ncur)); 3352 sitd->itd.itd_bp0 = HTOO32(bp0); 3353 sitd->nextitd = nsitd; 3354 sitd->itd.itd_nextitd = HTOO32(nsitd->physaddr); 3355 sitd->itd.itd_be = HTOO32(bp0 + offs - 1); 3356 sitd->xfer = xfer; 3357 sitd->flags = 0; 3358 usb_syncmem(&sitd->dma, sitd->offs, sizeof(sitd->itd), 3359 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3360 3361 sitd = nsitd; 3362 iso->next = iso->next + ncur; 3363 bp0 = OHCI_PAGE(buf + offs); 3364 ncur = 0; 3365 } 3366 sitd->itd.itd_offset[ncur] = HTOO16(OHCI_ITD_MK_OFFS(offs)); 3367 offs = noffs; 3368 } 3369 nsitd = ohci_alloc_sitd(sc); 3370 if (nsitd == NULL) { 3371 /* XXX what now? */ 3372 printf("%s: isoc TD alloc failed\n", 3373 device_xname(sc->sc_dev)); 3374 return; 3375 } 3376 /* Fixup last used ITD */ 3377 sitd->itd.itd_flags = HTOO32( 3378 OHCI_ITD_NOCC | 3379 OHCI_ITD_SET_SF(iso->next) | 3380 OHCI_ITD_SET_DI(0) | 3381 OHCI_ITD_SET_FC(ncur)); 3382 sitd->itd.itd_bp0 = HTOO32(bp0); 3383 sitd->nextitd = nsitd; 3384 sitd->itd.itd_nextitd = HTOO32(nsitd->physaddr); 3385 sitd->itd.itd_be = HTOO32(bp0 + offs - 1); 3386 sitd->xfer = xfer; 3387 sitd->flags = OHCI_CALL_DONE; 3388 usb_syncmem(&sitd->dma, sitd->offs, sizeof(sitd->itd), 3389 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3390 3391 iso->next = iso->next + ncur; 3392 iso->inuse += nframes; 3393 3394 xfer->actlen = offs; /* XXX pretend we did it all */ 3395 3396 xfer->status = USBD_IN_PROGRESS; 3397 3398 #ifdef OHCI_DEBUG 3399 if (ohcidebug > 5) { 3400 DPRINTF(("ohci_device_isoc_enter: frame=%d\n", 3401 O32TOH(sc->sc_hcca->hcca_frame_number))); 3402 ohci_dump_itds(sc, xfer->hcpriv); 3403 ohci_dump_ed(sc, sed); 3404 } 3405 #endif 3406 3407 s = splusb(); 3408 usb_syncmem(&sed->dma, sed->offs, sizeof(sed->ed), 3409 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 3410 sed->ed.ed_tailp = HTOO32(nsitd->physaddr); 3411 opipe->tail.itd = nsitd; 3412 sed->ed.ed_flags &= HTOO32(~OHCI_ED_SKIP); 3413 usb_syncmem(&sed->dma, sed->offs + offsetof(ohci_ed_t, ed_flags), 3414 sizeof(sed->ed.ed_flags), 3415 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3416 splx(s); 3417 3418 #ifdef OHCI_DEBUG 3419 if (ohcidebug > 5) { 3420 delay(150000); 3421 DPRINTF(("ohci_device_isoc_enter: after frame=%d\n", 3422 O32TOH(sc->sc_hcca->hcca_frame_number))); 3423 ohci_dump_itds(sc, xfer->hcpriv); 3424 ohci_dump_ed(sc, sed); 3425 } 3426 #endif 3427 } 3428 3429 usbd_status 3430 ohci_device_isoc_start(usbd_xfer_handle xfer) 3431 { 3432 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 3433 ohci_softc_t *sc = opipe->pipe.device->bus->hci_private; 3434 3435 DPRINTFN(5,("ohci_device_isoc_start: xfer=%p\n", xfer)); 3436 3437 if (sc->sc_dying) 3438 return (USBD_IOERROR); 3439 3440 #ifdef DIAGNOSTIC 3441 if (xfer->status != USBD_IN_PROGRESS) 3442 printf("ohci_device_isoc_start: not in progress %p\n", xfer); 3443 #endif 3444 3445 /* XXX anything to do? */ 3446 3447 return (USBD_IN_PROGRESS); 3448 } 3449 3450 void 3451 ohci_device_isoc_abort(usbd_xfer_handle xfer) 3452 { 3453 struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe; 3454 ohci_softc_t *sc = opipe->pipe.device->bus->hci_private; 3455 ohci_soft_ed_t *sed; 3456 ohci_soft_itd_t *sitd; 3457 int s; 3458 3459 s = splusb(); 3460 3461 DPRINTFN(1,("ohci_device_isoc_abort: xfer=%p\n", xfer)); 3462 3463 /* Transfer is already done. */ 3464 if (xfer->status != USBD_NOT_STARTED && 3465 xfer->status != USBD_IN_PROGRESS) { 3466 splx(s); 3467 printf("ohci_device_isoc_abort: early return\n"); 3468 return; 3469 } 3470 3471 /* Give xfer the requested abort code. */ 3472 xfer->status = USBD_CANCELLED; 3473 3474 sed = opipe->sed; 3475 usb_syncmem(&sed->dma, sed->offs, sizeof(sed->ed), 3476 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 3477 sed->ed.ed_flags |= HTOO32(OHCI_ED_SKIP); /* force hardware skip */ 3478 usb_syncmem(&sed->dma, sed->offs + offsetof(ohci_ed_t, ed_flags), 3479 sizeof(sed->ed.ed_flags), 3480 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3481 3482 sitd = xfer->hcpriv; 3483 #ifdef DIAGNOSTIC 3484 if (sitd == NULL) { 3485 splx(s); 3486 printf("ohci_device_isoc_abort: hcpriv==0\n"); 3487 return; 3488 } 3489 #endif 3490 for (; sitd->xfer == xfer; sitd = sitd->nextitd) { 3491 #ifdef DIAGNOSTIC 3492 DPRINTFN(1,("abort sets done sitd=%p\n", sitd)); 3493 sitd->isdone = 1; 3494 #endif 3495 } 3496 3497 splx(s); 3498 3499 usb_delay_ms(&sc->sc_bus, OHCI_ITD_NOFFSET); 3500 3501 s = splusb(); 3502 3503 /* Run callback. */ 3504 usb_transfer_complete(xfer); 3505 3506 sed->ed.ed_headp = HTOO32(sitd->physaddr); /* unlink TDs */ 3507 sed->ed.ed_flags &= HTOO32(~OHCI_ED_SKIP); /* remove hardware skip */ 3508 usb_syncmem(&sed->dma, sed->offs, sizeof(sed->ed), 3509 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3510 3511 splx(s); 3512 } 3513 3514 void 3515 ohci_device_isoc_done(usbd_xfer_handle xfer) 3516 { 3517 DPRINTFN(1,("ohci_device_isoc_done: xfer=%p\n", xfer)); 3518 } 3519 3520 usbd_status 3521 ohci_setup_isoc(usbd_pipe_handle pipe) 3522 { 3523 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 3524 ohci_softc_t *sc = pipe->device->bus->hci_private; 3525 struct iso *iso = &opipe->u.iso; 3526 int s; 3527 3528 iso->next = -1; 3529 iso->inuse = 0; 3530 3531 s = splusb(); 3532 ohci_add_ed(sc, opipe->sed, sc->sc_isoc_head); 3533 splx(s); 3534 3535 return (USBD_NORMAL_COMPLETION); 3536 } 3537 3538 void 3539 ohci_device_isoc_close(usbd_pipe_handle pipe) 3540 { 3541 struct ohci_pipe *opipe = (struct ohci_pipe *)pipe; 3542 ohci_softc_t *sc = pipe->device->bus->hci_private; 3543 3544 DPRINTF(("ohci_device_isoc_close: pipe=%p\n", pipe)); 3545 ohci_close_pipe(pipe, sc->sc_isoc_head); 3546 #ifdef DIAGNOSTIC 3547 opipe->tail.itd->isdone = 1; 3548 #endif 3549 ohci_free_sitd(sc, opipe->tail.itd); 3550 } 3551