1 /* $NetBSD: if_kue.c,v 1.86 2016/07/07 06:55:42 msaitoh Exp $ */ 2 3 /* 4 * Copyright (c) 1997, 1998, 1999, 2000 5 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 * 34 * $FreeBSD: src/sys/dev/usb/if_kue.c,v 1.14 2000/01/14 01:36:15 wpaul Exp $ 35 */ 36 37 /* 38 * Kawasaki LSI KL5KUSB101B USB to ethernet adapter driver. 39 * 40 * Written by Bill Paul <wpaul@ee.columbia.edu> 41 * Electrical Engineering Department 42 * Columbia University, New York City 43 */ 44 45 /* 46 * The KLSI USB to ethernet adapter chip contains an USB serial interface, 47 * ethernet MAC and embedded microcontroller (called the QT Engine). 48 * The chip must have firmware loaded into it before it will operate. 49 * Packets are passed between the chip and host via bulk transfers. 50 * There is an interrupt endpoint mentioned in the software spec, however 51 * it's currently unused. This device is 10Mbps half-duplex only, hence 52 * there is no media selection logic. The MAC supports a 128 entry 53 * multicast filter, though the exact size of the filter can depend 54 * on the firmware. Curiously, while the software spec describes various 55 * ethernet statistics counters, my sample adapter and firmware combination 56 * claims not to support any statistics counters at all. 57 * 58 * Note that once we load the firmware in the device, we have to be 59 * careful not to load it again: if you restart your computer but 60 * leave the adapter attached to the USB controller, it may remain 61 * powered on and retain its firmware. In this case, we don't need 62 * to load the firmware a second time. 63 * 64 * Special thanks to Rob Furr for providing an ADS Technologies 65 * adapter for development and testing. No monkeys were harmed during 66 * the development of this driver. 67 */ 68 69 /* 70 * Ported to NetBSD and somewhat rewritten by Lennart Augustsson. 71 */ 72 73 #include <sys/cdefs.h> 74 __KERNEL_RCSID(0, "$NetBSD: if_kue.c,v 1.86 2016/07/07 06:55:42 msaitoh Exp $"); 75 76 #ifdef _KERNEL_OPT 77 #include "opt_inet.h" 78 #endif 79 80 #include <sys/param.h> 81 #include <sys/systm.h> 82 #include <sys/sockio.h> 83 #include <sys/mbuf.h> 84 #include <sys/kmem.h> 85 #include <sys/kernel.h> 86 #include <sys/socket.h> 87 #include <sys/device.h> 88 #include <sys/proc.h> 89 #include <sys/rndsource.h> 90 91 #include <net/if.h> 92 #include <net/if_arp.h> 93 #include <net/if_dl.h> 94 #include <net/bpf.h> 95 #include <net/if_ether.h> 96 97 #ifdef INET 98 #include <netinet/in.h> 99 #include <netinet/if_inarp.h> 100 #endif 101 102 #include <dev/usb/usb.h> 103 #include <dev/usb/usbdi.h> 104 #include <dev/usb/usbdi_util.h> 105 #include <dev/usb/usbdivar.h> 106 #include <dev/usb/usbdevs.h> 107 108 #include <dev/usb/if_kuereg.h> 109 #include <dev/usb/kue_fw.h> 110 111 #ifdef KUE_DEBUG 112 #define DPRINTF(x) if (kuedebug) printf x 113 #define DPRINTFN(n,x) if (kuedebug >= (n)) printf x 114 int kuedebug = 0; 115 #else 116 #define DPRINTF(x) 117 #define DPRINTFN(n,x) 118 #endif 119 120 /* 121 * Various supported device vendors/products. 122 */ 123 static const struct usb_devno kue_devs[] = { 124 { USB_VENDOR_3COM, USB_PRODUCT_3COM_3C19250 }, 125 { USB_VENDOR_3COM, USB_PRODUCT_3COM_3C460 }, 126 { USB_VENDOR_ABOCOM, USB_PRODUCT_ABOCOM_URE450 }, 127 { USB_VENDOR_ADS, USB_PRODUCT_ADS_UBS10BT }, 128 { USB_VENDOR_ADS, USB_PRODUCT_ADS_UBS10BTX }, 129 { USB_VENDOR_AOX, USB_PRODUCT_AOX_USB101 }, 130 { USB_VENDOR_ASANTE, USB_PRODUCT_ASANTE_EA }, 131 { USB_VENDOR_ATEN, USB_PRODUCT_ATEN_UC10T }, 132 { USB_VENDOR_ATEN, USB_PRODUCT_ATEN_DSB650C }, 133 { USB_VENDOR_COREGA, USB_PRODUCT_COREGA_ETHER_USB_T }, 134 { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DSB650C }, 135 { USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_E45 }, 136 { USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_XX1 }, 137 { USB_VENDOR_ENTREGA, USB_PRODUCT_ENTREGA_XX2 }, 138 { USB_VENDOR_IODATA, USB_PRODUCT_IODATA_USBETT }, 139 { USB_VENDOR_JATON, USB_PRODUCT_JATON_EDA }, 140 { USB_VENDOR_KINGSTON, USB_PRODUCT_KINGSTON_XX1 }, 141 { USB_VENDOR_KLSI, USB_PRODUCT_KLSI_DUH3E10BT }, 142 { USB_VENDOR_KLSI, USB_PRODUCT_KLSI_DUH3E10BTN }, 143 { USB_VENDOR_LINKSYS, USB_PRODUCT_LINKSYS_USB10T }, 144 { USB_VENDOR_MOBILITY, USB_PRODUCT_MOBILITY_EA }, 145 { USB_VENDOR_NETGEAR, USB_PRODUCT_NETGEAR_EA101 }, 146 { USB_VENDOR_NETGEAR, USB_PRODUCT_NETGEAR_EA101X }, 147 { USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_ENET }, 148 { USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_ENET2 }, 149 { USB_VENDOR_PERACOM, USB_PRODUCT_PERACOM_ENET3 }, 150 { USB_VENDOR_PORTGEAR, USB_PRODUCT_PORTGEAR_EA8 }, 151 { USB_VENDOR_PORTGEAR, USB_PRODUCT_PORTGEAR_EA9 }, 152 { USB_VENDOR_PORTSMITH, USB_PRODUCT_PORTSMITH_EEA }, 153 { USB_VENDOR_SHARK, USB_PRODUCT_SHARK_PA }, 154 { USB_VENDOR_SILICOM, USB_PRODUCT_SILICOM_U2E }, 155 { USB_VENDOR_SMC, USB_PRODUCT_SMC_2102USB }, 156 }; 157 #define kue_lookup(v, p) (usb_lookup(kue_devs, v, p)) 158 159 int kue_match(device_t, cfdata_t, void *); 160 void kue_attach(device_t, device_t, void *); 161 int kue_detach(device_t, int); 162 int kue_activate(device_t, enum devact); 163 extern struct cfdriver kue_cd; 164 CFATTACH_DECL_NEW(kue, sizeof(struct kue_softc), kue_match, kue_attach, 165 kue_detach, kue_activate); 166 167 static int kue_tx_list_init(struct kue_softc *); 168 static int kue_rx_list_init(struct kue_softc *); 169 static int kue_send(struct kue_softc *, struct mbuf *, int); 170 static int kue_open_pipes(struct kue_softc *); 171 static void kue_rxeof(struct usbd_xfer *, void *, usbd_status); 172 static void kue_txeof(struct usbd_xfer *, void *, usbd_status); 173 static void kue_start(struct ifnet *); 174 static int kue_ioctl(struct ifnet *, u_long, void *); 175 static void kue_init(void *); 176 static void kue_stop(struct kue_softc *); 177 static void kue_watchdog(struct ifnet *); 178 179 static void kue_setmulti(struct kue_softc *); 180 static void kue_reset(struct kue_softc *); 181 182 static usbd_status kue_ctl(struct kue_softc *, int, uint8_t, 183 uint16_t, void *, uint32_t); 184 static usbd_status kue_setword(struct kue_softc *, uint8_t, uint16_t); 185 static int kue_load_fw(struct kue_softc *); 186 187 static usbd_status 188 kue_setword(struct kue_softc *sc, uint8_t breq, uint16_t word) 189 { 190 usb_device_request_t req; 191 192 DPRINTFN(10,("%s: %s: enter\n", device_xname(sc->kue_dev),__func__)); 193 194 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 195 req.bRequest = breq; 196 USETW(req.wValue, word); 197 USETW(req.wIndex, 0); 198 USETW(req.wLength, 0); 199 200 return usbd_do_request(sc->kue_udev, &req, NULL); 201 } 202 203 static usbd_status 204 kue_ctl(struct kue_softc *sc, int rw, uint8_t breq, uint16_t val, 205 void *data, uint32_t len) 206 { 207 usb_device_request_t req; 208 209 DPRINTFN(10,("%s: %s: enter, len=%d\n", device_xname(sc->kue_dev), 210 __func__, len)); 211 212 if (rw == KUE_CTL_WRITE) 213 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 214 else 215 req.bmRequestType = UT_READ_VENDOR_DEVICE; 216 217 req.bRequest = breq; 218 USETW(req.wValue, val); 219 USETW(req.wIndex, 0); 220 USETW(req.wLength, len); 221 222 return usbd_do_request(sc->kue_udev, &req, data); 223 } 224 225 static int 226 kue_load_fw(struct kue_softc *sc) 227 { 228 usb_device_descriptor_t dd; 229 usbd_status err; 230 231 DPRINTFN(1,("%s: %s: enter\n", device_xname(sc->kue_dev), __func__)); 232 233 /* 234 * First, check if we even need to load the firmware. 235 * If the device was still attached when the system was 236 * rebooted, it may already have firmware loaded in it. 237 * If this is the case, we don't need to do it again. 238 * And in fact, if we try to load it again, we'll hang, 239 * so we have to avoid this condition if we don't want 240 * to look stupid. 241 * 242 * We can test this quickly by checking the bcdRevision 243 * code. The NIC will return a different revision code if 244 * it's probed while the firmware is still loaded and 245 * running. 246 */ 247 if (usbd_get_device_desc(sc->kue_udev, &dd)) 248 return EIO; 249 if (UGETW(dd.bcdDevice) == KUE_WARM_REV) { 250 printf("%s: warm boot, no firmware download\n", 251 device_xname(sc->kue_dev)); 252 return 0; 253 } 254 255 printf("%s: cold boot, downloading firmware\n", 256 device_xname(sc->kue_dev)); 257 258 /* Load code segment */ 259 DPRINTFN(1,("%s: kue_load_fw: download code_seg\n", 260 device_xname(sc->kue_dev))); 261 /*XXXUNCONST*/ 262 err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN, 263 0, __UNCONST(kue_code_seg), sizeof(kue_code_seg)); 264 if (err) { 265 printf("%s: failed to load code segment: %s\n", 266 device_xname(sc->kue_dev), usbd_errstr(err)); 267 return EIO; 268 } 269 270 /* Load fixup segment */ 271 DPRINTFN(1,("%s: kue_load_fw: download fix_seg\n", 272 device_xname(sc->kue_dev))); 273 /*XXXUNCONST*/ 274 err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN, 275 0, __UNCONST(kue_fix_seg), sizeof(kue_fix_seg)); 276 if (err) { 277 printf("%s: failed to load fixup segment: %s\n", 278 device_xname(sc->kue_dev), usbd_errstr(err)); 279 return EIO; 280 } 281 282 /* Send trigger command. */ 283 DPRINTFN(1,("%s: kue_load_fw: download trig_seg\n", 284 device_xname(sc->kue_dev))); 285 /*XXXUNCONST*/ 286 err = kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SEND_SCAN, 287 0, __UNCONST(kue_trig_seg), sizeof(kue_trig_seg)); 288 if (err) { 289 printf("%s: failed to load trigger segment: %s\n", 290 device_xname(sc->kue_dev), usbd_errstr(err)); 291 return EIO; 292 } 293 294 usbd_delay_ms(sc->kue_udev, 10); 295 296 /* 297 * Reload device descriptor. 298 * Why? The chip without the firmware loaded returns 299 * one revision code. The chip with the firmware 300 * loaded and running returns a *different* revision 301 * code. This confuses the quirk mechanism, which is 302 * dependent on the revision data. 303 */ 304 (void)usbd_reload_device_desc(sc->kue_udev); 305 306 DPRINTFN(1,("%s: %s: done\n", device_xname(sc->kue_dev), __func__)); 307 308 /* Reset the adapter. */ 309 kue_reset(sc); 310 311 return 0; 312 } 313 314 static void 315 kue_setmulti(struct kue_softc *sc) 316 { 317 struct ifnet *ifp = GET_IFP(sc); 318 struct ether_multi *enm; 319 struct ether_multistep step; 320 int i; 321 322 DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->kue_dev), __func__)); 323 324 if (ifp->if_flags & IFF_PROMISC) { 325 allmulti: 326 ifp->if_flags |= IFF_ALLMULTI; 327 sc->kue_rxfilt |= KUE_RXFILT_ALLMULTI; 328 sc->kue_rxfilt &= ~KUE_RXFILT_MULTICAST; 329 kue_setword(sc, KUE_CMD_SET_PKT_FILTER, sc->kue_rxfilt); 330 return; 331 } 332 333 sc->kue_rxfilt &= ~KUE_RXFILT_ALLMULTI; 334 335 i = 0; 336 ETHER_FIRST_MULTI(step, &sc->kue_ec, enm); 337 while (enm != NULL) { 338 if (i == KUE_MCFILTCNT(sc) || 339 memcmp(enm->enm_addrlo, enm->enm_addrhi, 340 ETHER_ADDR_LEN) != 0) 341 goto allmulti; 342 343 memcpy(KUE_MCFILT(sc, i), enm->enm_addrlo, ETHER_ADDR_LEN); 344 ETHER_NEXT_MULTI(step, enm); 345 i++; 346 } 347 348 ifp->if_flags &= ~IFF_ALLMULTI; 349 350 sc->kue_rxfilt |= KUE_RXFILT_MULTICAST; 351 kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SET_MCAST_FILTERS, 352 i, sc->kue_mcfilters, i * ETHER_ADDR_LEN); 353 354 kue_setword(sc, KUE_CMD_SET_PKT_FILTER, sc->kue_rxfilt); 355 } 356 357 /* 358 * Issue a SET_CONFIGURATION command to reset the MAC. This should be 359 * done after the firmware is loaded into the adapter in order to 360 * bring it into proper operation. 361 */ 362 static void 363 kue_reset(struct kue_softc *sc) 364 { 365 DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->kue_dev), __func__)); 366 367 if (usbd_set_config_no(sc->kue_udev, KUE_CONFIG_NO, 1) || 368 usbd_device2interface_handle(sc->kue_udev, KUE_IFACE_IDX, 369 &sc->kue_iface)) 370 printf("%s: reset failed\n", device_xname(sc->kue_dev)); 371 372 /* Wait a little while for the chip to get its brains in order. */ 373 usbd_delay_ms(sc->kue_udev, 10); 374 } 375 376 /* 377 * Probe for a KLSI chip. 378 */ 379 int 380 kue_match(device_t parent, cfdata_t match, void *aux) 381 { 382 struct usb_attach_arg *uaa = aux; 383 384 DPRINTFN(25,("kue_match: enter\n")); 385 386 return kue_lookup(uaa->uaa_vendor, uaa->uaa_product) != NULL ? 387 UMATCH_VENDOR_PRODUCT : UMATCH_NONE; 388 } 389 390 /* 391 * Attach the interface. Allocate softc structures, do 392 * setup and ethernet/BPF attach. 393 */ 394 void 395 kue_attach(device_t parent, device_t self, void *aux) 396 { 397 struct kue_softc *sc = device_private(self); 398 struct usb_attach_arg *uaa = aux; 399 char *devinfop; 400 int s; 401 struct ifnet *ifp; 402 struct usbd_device * dev = uaa->uaa_device; 403 struct usbd_interface * iface; 404 usbd_status err; 405 usb_interface_descriptor_t *id; 406 usb_endpoint_descriptor_t *ed; 407 int i; 408 409 DPRINTFN(5,(" : kue_attach: sc=%p, dev=%p", sc, dev)); 410 411 sc->kue_dev = self; 412 413 aprint_naive("\n"); 414 aprint_normal("\n"); 415 416 devinfop = usbd_devinfo_alloc(dev, 0); 417 aprint_normal_dev(self, "%s\n", devinfop); 418 usbd_devinfo_free(devinfop); 419 420 err = usbd_set_config_no(dev, KUE_CONFIG_NO, 1); 421 if (err) { 422 aprint_error_dev(self, "failed to set configuration" 423 ", err=%s\n", usbd_errstr(err)); 424 return; 425 } 426 427 sc->kue_udev = dev; 428 sc->kue_product = uaa->uaa_product; 429 sc->kue_vendor = uaa->uaa_vendor; 430 431 /* Load the firmware into the NIC. */ 432 if (kue_load_fw(sc)) { 433 aprint_error_dev(self, "loading firmware failed\n"); 434 return; 435 } 436 437 err = usbd_device2interface_handle(dev, KUE_IFACE_IDX, &iface); 438 if (err) { 439 aprint_error_dev(self, "getting interface handle failed\n"); 440 return; 441 } 442 443 sc->kue_iface = iface; 444 id = usbd_get_interface_descriptor(iface); 445 446 /* Find endpoints. */ 447 for (i = 0; i < id->bNumEndpoints; i++) { 448 ed = usbd_interface2endpoint_descriptor(iface, i); 449 if (ed == NULL) { 450 aprint_error_dev(self, "couldn't get ep %d\n", i); 451 return; 452 } 453 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 454 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 455 sc->kue_ed[KUE_ENDPT_RX] = ed->bEndpointAddress; 456 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && 457 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 458 sc->kue_ed[KUE_ENDPT_TX] = ed->bEndpointAddress; 459 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 460 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { 461 sc->kue_ed[KUE_ENDPT_INTR] = ed->bEndpointAddress; 462 } 463 } 464 465 if (sc->kue_ed[KUE_ENDPT_RX] == 0 || sc->kue_ed[KUE_ENDPT_TX] == 0) { 466 aprint_error_dev(self, "missing endpoint\n"); 467 return; 468 } 469 470 /* Read ethernet descriptor */ 471 err = kue_ctl(sc, KUE_CTL_READ, KUE_CMD_GET_ETHER_DESCRIPTOR, 472 0, &sc->kue_desc, sizeof(sc->kue_desc)); 473 if (err) { 474 aprint_error_dev(self, "could not read Ethernet descriptor\n"); 475 return; 476 } 477 478 sc->kue_mcfilters = kmem_alloc(KUE_MCFILTCNT(sc) * ETHER_ADDR_LEN, 479 KM_SLEEP); 480 if (sc->kue_mcfilters == NULL) { 481 aprint_error_dev(self, 482 "no memory for multicast filter buffer\n"); 483 return; 484 } 485 486 s = splnet(); 487 488 /* 489 * A KLSI chip was detected. Inform the world. 490 */ 491 aprint_normal_dev(self, "Ethernet address %s\n", 492 ether_sprintf(sc->kue_desc.kue_macaddr)); 493 494 /* Initialize interface info.*/ 495 ifp = GET_IFP(sc); 496 ifp->if_softc = sc; 497 ifp->if_mtu = ETHERMTU; 498 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 499 ifp->if_ioctl = kue_ioctl; 500 ifp->if_start = kue_start; 501 ifp->if_watchdog = kue_watchdog; 502 strncpy(ifp->if_xname, device_xname(sc->kue_dev), IFNAMSIZ); 503 504 IFQ_SET_READY(&ifp->if_snd); 505 506 /* Attach the interface. */ 507 if_attach(ifp); 508 ether_ifattach(ifp, sc->kue_desc.kue_macaddr); 509 rnd_attach_source(&sc->rnd_source, device_xname(sc->kue_dev), 510 RND_TYPE_NET, RND_FLAG_DEFAULT); 511 512 sc->kue_attached = true; 513 splx(s); 514 515 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->kue_udev, sc->kue_dev); 516 517 return; 518 } 519 520 int 521 kue_detach(device_t self, int flags) 522 { 523 struct kue_softc *sc = device_private(self); 524 struct ifnet *ifp = GET_IFP(sc); 525 int s; 526 527 s = splusb(); /* XXX why? */ 528 529 if (sc->kue_mcfilters != NULL) { 530 kmem_free(sc->kue_mcfilters, 531 KUE_MCFILTCNT(sc) * ETHER_ADDR_LEN); 532 sc->kue_mcfilters = NULL; 533 } 534 535 if (!sc->kue_attached) { 536 /* Detached before attached finished, so just bail out. */ 537 splx(s); 538 return 0; 539 } 540 541 if (ifp->if_flags & IFF_RUNNING) 542 kue_stop(sc); 543 544 rnd_detach_source(&sc->rnd_source); 545 ether_ifdetach(ifp); 546 547 if_detach(ifp); 548 549 #ifdef DIAGNOSTIC 550 if (sc->kue_ep[KUE_ENDPT_TX] != NULL || 551 sc->kue_ep[KUE_ENDPT_RX] != NULL || 552 sc->kue_ep[KUE_ENDPT_INTR] != NULL) 553 aprint_debug_dev(self, "detach has active endpoints\n"); 554 #endif 555 556 sc->kue_attached = false; 557 splx(s); 558 559 return 0; 560 } 561 562 int 563 kue_activate(device_t self, enum devact act) 564 { 565 struct kue_softc *sc = device_private(self); 566 567 DPRINTFN(2,("%s: %s: enter\n", device_xname(sc->kue_dev), __func__)); 568 569 switch (act) { 570 case DVACT_DEACTIVATE: 571 /* Deactivate the interface. */ 572 if_deactivate(&sc->kue_ec.ec_if); 573 sc->kue_dying = true; 574 return 0; 575 default: 576 return EOPNOTSUPP; 577 } 578 } 579 580 static int 581 kue_rx_list_init(struct kue_softc *sc) 582 { 583 struct kue_cdata *cd; 584 struct kue_chain *c; 585 int i; 586 587 DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->kue_dev), __func__)); 588 589 cd = &sc->kue_cdata; 590 for (i = 0; i < KUE_RX_LIST_CNT; i++) { 591 c = &cd->kue_rx_chain[i]; 592 c->kue_sc = sc; 593 c->kue_idx = i; 594 if (c->kue_xfer == NULL) { 595 int error = usbd_create_xfer(sc->kue_ep[KUE_ENDPT_RX], 596 KUE_BUFSZ, USBD_SHORT_XFER_OK, 0, &c->kue_xfer); 597 if (error) 598 return error; 599 c->kue_buf = usbd_get_buffer(c->kue_xfer); 600 } 601 } 602 603 return 0; 604 } 605 606 static int 607 kue_tx_list_init(struct kue_softc *sc) 608 { 609 struct kue_cdata *cd; 610 struct kue_chain *c; 611 int i; 612 613 DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->kue_dev), __func__)); 614 615 cd = &sc->kue_cdata; 616 for (i = 0; i < KUE_TX_LIST_CNT; i++) { 617 c = &cd->kue_tx_chain[i]; 618 c->kue_sc = sc; 619 c->kue_idx = i; 620 if (c->kue_xfer == NULL) { 621 int error = usbd_create_xfer(sc->kue_ep[KUE_ENDPT_TX], 622 KUE_BUFSZ, 0, 0, &c->kue_xfer); 623 if (error) 624 return error; 625 c->kue_buf = usbd_get_buffer(c->kue_xfer); 626 } 627 } 628 629 return 0; 630 } 631 632 /* 633 * A frame has been uploaded: pass the resulting mbuf chain up to 634 * the higher level protocols. 635 */ 636 static void 637 kue_rxeof(struct usbd_xfer *xfer, void *priv, usbd_status status) 638 { 639 struct kue_chain *c = priv; 640 struct kue_softc *sc = c->kue_sc; 641 struct ifnet *ifp = GET_IFP(sc); 642 struct mbuf *m; 643 int total_len, pktlen; 644 int s; 645 646 DPRINTFN(10,("%s: %s: enter status=%d\n", device_xname(sc->kue_dev), 647 __func__, status)); 648 649 if (sc->kue_dying) 650 return; 651 652 if (!(ifp->if_flags & IFF_RUNNING)) 653 return; 654 655 if (status != USBD_NORMAL_COMPLETION) { 656 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) 657 return; 658 sc->kue_rx_errs++; 659 if (usbd_ratecheck(&sc->kue_rx_notice)) { 660 printf("%s: %u usb errors on rx: %s\n", 661 device_xname(sc->kue_dev), sc->kue_rx_errs, 662 usbd_errstr(status)); 663 sc->kue_rx_errs = 0; 664 } 665 if (status == USBD_STALLED) 666 usbd_clear_endpoint_stall_async(sc->kue_ep[KUE_ENDPT_RX]); 667 goto done; 668 } 669 670 usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL); 671 672 DPRINTFN(10,("%s: %s: total_len=%d len=%d\n", device_xname(sc->kue_dev), 673 __func__, total_len, 674 le16dec(c->kue_buf))); 675 676 if (total_len <= 1) 677 goto done; 678 679 pktlen = le16dec(c->kue_buf); 680 if (pktlen > total_len - 2) 681 pktlen = total_len - 2; 682 683 if (pktlen < ETHER_MIN_LEN - ETHER_CRC_LEN || 684 pktlen > MCLBYTES - ETHER_ALIGN) { 685 ifp->if_ierrors++; 686 goto done; 687 } 688 689 /* No errors; receive the packet. */ 690 MGETHDR(m, M_DONTWAIT, MT_DATA); 691 if (m == NULL) { 692 ifp->if_ierrors++; 693 goto done; 694 } 695 if (pktlen > MHLEN - ETHER_ALIGN) { 696 MCLGET(m, M_DONTWAIT); 697 if ((m->m_flags & M_EXT) == 0) { 698 m_freem(m); 699 ifp->if_ierrors++; 700 goto done; 701 } 702 } 703 m->m_data += ETHER_ALIGN; 704 705 /* copy data to mbuf */ 706 memcpy(mtod(m, uint8_t *), c->kue_buf + 2, pktlen); 707 708 ifp->if_ipackets++; 709 m->m_pkthdr.len = m->m_len = pktlen; 710 m_set_rcvif(m, ifp); 711 712 s = splnet(); 713 714 /* 715 * Handle BPF listeners. Let the BPF user see the packet, but 716 * don't pass it up to the ether_input() layer unless it's 717 * a broadcast packet, multicast packet, matches our ethernet 718 * address or the interface is in promiscuous mode. 719 */ 720 bpf_mtap(ifp, m); 721 722 DPRINTFN(10,("%s: %s: deliver %d\n", device_xname(sc->kue_dev), 723 __func__, m->m_len)); 724 if_percpuq_enqueue(ifp->if_percpuq, m); 725 726 splx(s); 727 728 done: 729 730 /* Setup new transfer. */ 731 usbd_setup_xfer(c->kue_xfer, c, c->kue_buf, KUE_BUFSZ, 732 USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, kue_rxeof); 733 usbd_transfer(c->kue_xfer); 734 735 DPRINTFN(10,("%s: %s: start rx\n", device_xname(sc->kue_dev), 736 __func__)); 737 } 738 739 /* 740 * A frame was downloaded to the chip. It's safe for us to clean up 741 * the list buffers. 742 */ 743 744 static void 745 kue_txeof(struct usbd_xfer *xfer, void *priv, 746 usbd_status status) 747 { 748 struct kue_chain *c = priv; 749 struct kue_softc *sc = c->kue_sc; 750 struct ifnet *ifp = GET_IFP(sc); 751 int s; 752 753 if (sc->kue_dying) 754 return; 755 756 s = splnet(); 757 758 DPRINTFN(10,("%s: %s: enter status=%d\n", device_xname(sc->kue_dev), 759 __func__, status)); 760 761 ifp->if_timer = 0; 762 ifp->if_flags &= ~IFF_OACTIVE; 763 764 if (status != USBD_NORMAL_COMPLETION) { 765 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) { 766 splx(s); 767 return; 768 } 769 ifp->if_oerrors++; 770 printf("%s: usb error on tx: %s\n", device_xname(sc->kue_dev), 771 usbd_errstr(status)); 772 if (status == USBD_STALLED) 773 usbd_clear_endpoint_stall_async(sc->kue_ep[KUE_ENDPT_TX]); 774 splx(s); 775 return; 776 } 777 778 ifp->if_opackets++; 779 780 if (IFQ_IS_EMPTY(&ifp->if_snd) == 0) 781 kue_start(ifp); 782 783 splx(s); 784 } 785 786 static int 787 kue_send(struct kue_softc *sc, struct mbuf *m, int idx) 788 { 789 int total_len; 790 struct kue_chain *c; 791 usbd_status err; 792 793 DPRINTFN(10,("%s: %s: enter\n", device_xname(sc->kue_dev),__func__)); 794 795 c = &sc->kue_cdata.kue_tx_chain[idx]; 796 797 /* Frame length is specified in the first 2 bytes of the buffer. */ 798 le16enc(c->kue_buf, (uint16_t)m->m_pkthdr.len); 799 800 /* 801 * Copy the mbuf data into a contiguous buffer, leaving two 802 * bytes at the beginning to hold the frame length. 803 */ 804 m_copydata(m, 0, m->m_pkthdr.len, c->kue_buf + 2); 805 806 total_len = 2 + m->m_pkthdr.len; 807 total_len = roundup2(total_len, 64); 808 809 usbd_setup_xfer(c->kue_xfer, c, c->kue_buf, total_len, 0, 810 USBD_DEFAULT_TIMEOUT, kue_txeof); 811 812 /* Transmit */ 813 err = usbd_transfer(c->kue_xfer); 814 if (err != USBD_IN_PROGRESS) { 815 printf("%s: kue_send error=%s\n", device_xname(sc->kue_dev), 816 usbd_errstr(err)); 817 kue_stop(sc); 818 return EIO; 819 } 820 821 sc->kue_cdata.kue_tx_cnt++; 822 823 return 0; 824 } 825 826 static void 827 kue_start(struct ifnet *ifp) 828 { 829 struct kue_softc *sc = ifp->if_softc; 830 struct mbuf *m; 831 832 DPRINTFN(10,("%s: %s: enter\n", device_xname(sc->kue_dev),__func__)); 833 834 if (sc->kue_dying) 835 return; 836 837 if (ifp->if_flags & IFF_OACTIVE) 838 return; 839 840 IFQ_POLL(&ifp->if_snd, m); 841 if (m == NULL) 842 return; 843 844 if (kue_send(sc, m, 0)) { 845 ifp->if_flags |= IFF_OACTIVE; 846 return; 847 } 848 849 IFQ_DEQUEUE(&ifp->if_snd, m); 850 851 /* 852 * If there's a BPF listener, bounce a copy of this frame 853 * to him. 854 */ 855 bpf_mtap(ifp, m); 856 m_freem(m); 857 858 ifp->if_flags |= IFF_OACTIVE; 859 860 /* 861 * Set a timeout in case the chip goes out to lunch. 862 */ 863 ifp->if_timer = 6; 864 } 865 866 static void 867 kue_init(void *xsc) 868 { 869 struct kue_softc *sc = xsc; 870 struct ifnet *ifp = GET_IFP(sc); 871 int s; 872 uint8_t eaddr[ETHER_ADDR_LEN]; 873 874 DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->kue_dev),__func__)); 875 876 if (ifp->if_flags & IFF_RUNNING) 877 return; 878 879 s = splnet(); 880 881 memcpy(eaddr, CLLADDR(ifp->if_sadl), sizeof(eaddr)); 882 /* Set MAC address */ 883 kue_ctl(sc, KUE_CTL_WRITE, KUE_CMD_SET_MAC, 0, eaddr, ETHER_ADDR_LEN); 884 885 sc->kue_rxfilt = KUE_RXFILT_UNICAST | KUE_RXFILT_BROADCAST; 886 887 /* If we want promiscuous mode, set the allframes bit. */ 888 if (ifp->if_flags & IFF_PROMISC) 889 sc->kue_rxfilt |= KUE_RXFILT_PROMISC; 890 891 kue_setword(sc, KUE_CMD_SET_PKT_FILTER, sc->kue_rxfilt); 892 893 /* I'm not sure how to tune these. */ 894 #if 0 895 /* 896 * Leave this one alone for now; setting it 897 * wrong causes lockups on some machines/controllers. 898 */ 899 kue_setword(sc, KUE_CMD_SET_SOFS, 1); 900 #endif 901 kue_setword(sc, KUE_CMD_SET_URB_SIZE, 64); 902 903 /* Load the multicast filter. */ 904 kue_setmulti(sc); 905 906 if (sc->kue_ep[KUE_ENDPT_RX] == NULL) { 907 if (kue_open_pipes(sc)) { 908 splx(s); 909 return; 910 } 911 } 912 /* Init TX ring. */ 913 if (kue_tx_list_init(sc)) { 914 printf("%s: tx list init failed\n", device_xname(sc->kue_dev)); 915 splx(s); 916 return; 917 } 918 919 /* Init RX ring. */ 920 if (kue_rx_list_init(sc)) { 921 printf("%s: rx list init failed\n", device_xname(sc->kue_dev)); 922 splx(s); 923 return; 924 } 925 926 /* Start up the receive pipe. */ 927 for (size_t i = 0; i < KUE_RX_LIST_CNT; i++) { 928 struct kue_chain *c = &sc->kue_cdata.kue_rx_chain[i]; 929 usbd_setup_xfer(c->kue_xfer, c, c->kue_buf, KUE_BUFSZ, 930 USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, kue_rxeof); 931 DPRINTFN(5,("%s: %s: start read\n", device_xname(sc->kue_dev), 932 __func__)); 933 usbd_transfer(c->kue_xfer); 934 } 935 936 ifp->if_flags |= IFF_RUNNING; 937 ifp->if_flags &= ~IFF_OACTIVE; 938 939 splx(s); 940 } 941 942 static int 943 kue_open_pipes(struct kue_softc *sc) 944 { 945 usbd_status err; 946 947 DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->kue_dev),__func__)); 948 949 /* Open RX and TX pipes. */ 950 err = usbd_open_pipe(sc->kue_iface, sc->kue_ed[KUE_ENDPT_RX], 951 USBD_EXCLUSIVE_USE, &sc->kue_ep[KUE_ENDPT_RX]); 952 if (err) { 953 printf("%s: open rx pipe failed: %s\n", 954 device_xname(sc->kue_dev), usbd_errstr(err)); 955 return EIO; 956 } 957 958 err = usbd_open_pipe(sc->kue_iface, sc->kue_ed[KUE_ENDPT_TX], 959 USBD_EXCLUSIVE_USE, &sc->kue_ep[KUE_ENDPT_TX]); 960 if (err) { 961 printf("%s: open tx pipe failed: %s\n", 962 device_xname(sc->kue_dev), usbd_errstr(err)); 963 return EIO; 964 } 965 966 return 0; 967 } 968 969 static int 970 kue_ioctl(struct ifnet *ifp, u_long command, void *data) 971 { 972 struct kue_softc *sc = ifp->if_softc; 973 struct ifaddr *ifa = (struct ifaddr *)data; 974 struct ifreq *ifr = (struct ifreq *)data; 975 int s, error = 0; 976 977 DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->kue_dev),__func__)); 978 979 if (sc->kue_dying) 980 return EIO; 981 982 s = splnet(); 983 984 switch(command) { 985 case SIOCINITIFADDR: 986 ifp->if_flags |= IFF_UP; 987 kue_init(sc); 988 989 switch (ifa->ifa_addr->sa_family) { 990 #ifdef INET 991 case AF_INET: 992 arp_ifinit(ifp, ifa); 993 break; 994 #endif /* INET */ 995 } 996 break; 997 998 case SIOCSIFMTU: 999 if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ETHERMTU) 1000 error = EINVAL; 1001 else if ((error = ifioctl_common(ifp, command, data)) == ENETRESET) 1002 error = 0; 1003 break; 1004 1005 case SIOCSIFFLAGS: 1006 if ((error = ifioctl_common(ifp, command, data)) != 0) 1007 break; 1008 if (ifp->if_flags & IFF_UP) { 1009 if (ifp->if_flags & IFF_RUNNING && 1010 ifp->if_flags & IFF_PROMISC && 1011 !(sc->kue_if_flags & IFF_PROMISC)) { 1012 sc->kue_rxfilt |= KUE_RXFILT_PROMISC; 1013 kue_setword(sc, KUE_CMD_SET_PKT_FILTER, 1014 sc->kue_rxfilt); 1015 } else if (ifp->if_flags & IFF_RUNNING && 1016 !(ifp->if_flags & IFF_PROMISC) && 1017 sc->kue_if_flags & IFF_PROMISC) { 1018 sc->kue_rxfilt &= ~KUE_RXFILT_PROMISC; 1019 kue_setword(sc, KUE_CMD_SET_PKT_FILTER, 1020 sc->kue_rxfilt); 1021 } else if (!(ifp->if_flags & IFF_RUNNING)) 1022 kue_init(sc); 1023 } else { 1024 if (ifp->if_flags & IFF_RUNNING) 1025 kue_stop(sc); 1026 } 1027 sc->kue_if_flags = ifp->if_flags; 1028 error = 0; 1029 break; 1030 case SIOCADDMULTI: 1031 case SIOCDELMULTI: 1032 error = ether_ioctl(ifp, command, data); 1033 if (error == ENETRESET) { 1034 if (ifp->if_flags & IFF_RUNNING) 1035 kue_setmulti(sc); 1036 error = 0; 1037 } 1038 break; 1039 default: 1040 error = ether_ioctl(ifp, command, data); 1041 break; 1042 } 1043 1044 splx(s); 1045 1046 return error; 1047 } 1048 1049 static void 1050 kue_watchdog(struct ifnet *ifp) 1051 { 1052 struct kue_softc *sc = ifp->if_softc; 1053 struct kue_chain *c; 1054 usbd_status stat; 1055 int s; 1056 1057 DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->kue_dev),__func__)); 1058 1059 if (sc->kue_dying) 1060 return; 1061 1062 ifp->if_oerrors++; 1063 printf("%s: watchdog timeout\n", device_xname(sc->kue_dev)); 1064 1065 s = splusb(); 1066 c = &sc->kue_cdata.kue_tx_chain[0]; 1067 usbd_get_xfer_status(c->kue_xfer, NULL, NULL, NULL, &stat); 1068 kue_txeof(c->kue_xfer, c, stat); 1069 1070 if (IFQ_IS_EMPTY(&ifp->if_snd) == 0) 1071 kue_start(ifp); 1072 splx(s); 1073 } 1074 1075 /* 1076 * Stop the adapter and free any mbufs allocated to the 1077 * RX and TX lists. 1078 */ 1079 static void 1080 kue_stop(struct kue_softc *sc) 1081 { 1082 usbd_status err; 1083 struct ifnet *ifp; 1084 int i; 1085 1086 DPRINTFN(5,("%s: %s: enter\n", device_xname(sc->kue_dev),__func__)); 1087 1088 ifp = GET_IFP(sc); 1089 ifp->if_timer = 0; 1090 1091 /* Stop transfers. */ 1092 if (sc->kue_ep[KUE_ENDPT_RX] != NULL) { 1093 err = usbd_abort_pipe(sc->kue_ep[KUE_ENDPT_RX]); 1094 if (err) { 1095 printf("%s: abort rx pipe failed: %s\n", 1096 device_xname(sc->kue_dev), usbd_errstr(err)); 1097 } 1098 } 1099 1100 if (sc->kue_ep[KUE_ENDPT_TX] != NULL) { 1101 err = usbd_abort_pipe(sc->kue_ep[KUE_ENDPT_TX]); 1102 if (err) { 1103 printf("%s: abort tx pipe failed: %s\n", 1104 device_xname(sc->kue_dev), usbd_errstr(err)); 1105 } 1106 } 1107 1108 if (sc->kue_ep[KUE_ENDPT_INTR] != NULL) { 1109 err = usbd_abort_pipe(sc->kue_ep[KUE_ENDPT_INTR]); 1110 if (err) { 1111 printf("%s: abort intr pipe failed: %s\n", 1112 device_xname(sc->kue_dev), usbd_errstr(err)); 1113 } 1114 } 1115 1116 /* Free RX resources. */ 1117 for (i = 0; i < KUE_RX_LIST_CNT; i++) { 1118 if (sc->kue_cdata.kue_rx_chain[i].kue_xfer != NULL) { 1119 usbd_destroy_xfer(sc->kue_cdata.kue_rx_chain[i].kue_xfer); 1120 sc->kue_cdata.kue_rx_chain[i].kue_xfer = NULL; 1121 } 1122 } 1123 1124 /* Free TX resources. */ 1125 for (i = 0; i < KUE_TX_LIST_CNT; i++) { 1126 if (sc->kue_cdata.kue_tx_chain[i].kue_xfer != NULL) { 1127 usbd_destroy_xfer(sc->kue_cdata.kue_tx_chain[i].kue_xfer); 1128 sc->kue_cdata.kue_tx_chain[i].kue_xfer = NULL; 1129 } 1130 } 1131 1132 /* Close pipes. */ 1133 if (sc->kue_ep[KUE_ENDPT_RX] != NULL) { 1134 err = usbd_close_pipe(sc->kue_ep[KUE_ENDPT_RX]); 1135 if (err) { 1136 printf("%s: close rx pipe failed: %s\n", 1137 device_xname(sc->kue_dev), usbd_errstr(err)); 1138 } 1139 sc->kue_ep[KUE_ENDPT_RX] = NULL; 1140 } 1141 1142 if (sc->kue_ep[KUE_ENDPT_TX] != NULL) { 1143 err = usbd_close_pipe(sc->kue_ep[KUE_ENDPT_TX]); 1144 if (err) { 1145 printf("%s: close tx pipe failed: %s\n", 1146 device_xname(sc->kue_dev), usbd_errstr(err)); 1147 } 1148 sc->kue_ep[KUE_ENDPT_TX] = NULL; 1149 } 1150 1151 if (sc->kue_ep[KUE_ENDPT_INTR] != NULL) { 1152 err = usbd_close_pipe(sc->kue_ep[KUE_ENDPT_INTR]); 1153 if (err) { 1154 printf("%s: close intr pipe failed: %s\n", 1155 device_xname(sc->kue_dev), usbd_errstr(err)); 1156 } 1157 sc->kue_ep[KUE_ENDPT_INTR] = NULL; 1158 } 1159 1160 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1161 } 1162