1 /* $NetBSD: if_axe.c,v 1.9 2005/05/30 04:21:39 christos Exp $ */ 2 3 /* 4 * Copyright (c) 1997, 1998, 1999, 2000-2003 5 * Bill Paul <wpaul@windriver.com>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 /* 36 * ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the 37 * LinkSys USB200M and various other adapters. 38 * 39 * Manuals available from: 40 * http://www.asix.com.tw/datasheet/mac/Ax88172.PDF 41 * (also http://people.freebsd.org/~wpaul/ASIX/Ax88172.PDF) 42 * Note: you need the manual for the AX88170 chip (USB 1.x ethernet 43 * controller) to find the definitions for the RX control register. 44 * http://www.asix.com.tw/datasheet/mac/Ax88170.PDF 45 * 46 * Written by Bill Paul <wpaul@windriver.com> 47 * Senior Engineer 48 * Wind River Systems 49 */ 50 51 /* 52 * The AX88172 provides USB ethernet supports at 10 and 100Mbps. 53 * It uses an external PHY (reference designs use a RealTek chip), 54 * and has a 64-bit multicast hash filter. There is some information 55 * missing from the manual which one needs to know in order to make 56 * the chip function: 57 * 58 * - You must set bit 7 in the RX control register, otherwise the 59 * chip won't receive any packets. 60 * - You must initialize all 3 IPG registers, or you won't be able 61 * to send any packets. 62 * 63 * Note that this device appears to only support loading the station 64 * address via autload from the EEPROM (i.e. there's no way to manaully 65 * set it). 66 * 67 * (Adam Weinberger wanted me to name this driver if_gir.c.) 68 */ 69 70 /* 71 * Ported to OpenBSD 3/28/2004 by Greg Taleck <taleck@oz.net> 72 * with bits and pieces from the aue and url drivers. 73 */ 74 75 #include <sys/cdefs.h> 76 __KERNEL_RCSID(0, "$NetBSD: if_axe.c,v 1.9 2005/05/30 04:21:39 christos Exp $"); 77 78 #if defined(__NetBSD__) 79 #include "opt_inet.h" 80 #include "opt_ns.h" 81 #include "rnd.h" 82 #endif 83 84 #include "bpfilter.h" 85 86 #include <sys/param.h> 87 #include <sys/systm.h> 88 #include <sys/sockio.h> 89 #include <sys/lock.h> 90 #include <sys/mbuf.h> 91 #include <sys/kernel.h> 92 #if defined(__OpenBSD__) 93 #include <sys/proc.h> 94 #endif 95 #include <sys/socket.h> 96 97 #include <sys/device.h> 98 #if NRND > 0 99 #include <sys/rnd.h> 100 #endif 101 102 #include <net/if.h> 103 #if defined(__NetBSD__) 104 #include <net/if_arp.h> 105 #endif 106 #include <net/if_dl.h> 107 #include <net/if_media.h> 108 109 #define BPF_MTAP(ifp, m) bpf_mtap((ifp)->if_bpf, (m)) 110 111 #if NBPFILTER > 0 112 #include <net/bpf.h> 113 #endif 114 115 #if defined(__NetBSD__) 116 #include <net/if_ether.h> 117 #ifdef INET 118 #include <netinet/in.h> 119 #include <netinet/if_inarp.h> 120 #endif 121 #endif /* defined(__NetBSD__) */ 122 123 #if defined(__OpenBSD__) 124 #ifdef INET 125 #include <netinet/in.h> 126 #include <netinet/in_systm.h> 127 #include <netinet/in_var.h> 128 #include <netinet/ip.h> 129 #include <netinet/if_ether.h> 130 #endif 131 #endif /* defined(__OpenBSD__) */ 132 133 #ifdef NS 134 #include <netns/ns.h> 135 #include <netns/ns_if.h> 136 #endif 137 138 #include <dev/mii/mii.h> 139 #include <dev/mii/miivar.h> 140 141 #include <dev/usb/usb.h> 142 #include <dev/usb/usbdi.h> 143 #include <dev/usb/usbdi_util.h> 144 #include <dev/usb/usbdevs.h> 145 146 #include <dev/usb/if_axereg.h> 147 148 #ifdef AXE_DEBUG 149 #define DPRINTF(x) do { if (axedebug) logprintf x; } while (0) 150 #define DPRINTFN(n,x) do { if (axedebug >= (n)) logprintf x; } while (0) 151 int axedebug = 0; 152 #else 153 #define DPRINTF(x) 154 #define DPRINTFN(n,x) 155 #endif 156 157 /* 158 * Various supported device vendors/products. 159 */ 160 Static const struct axe_type axe_devs[] = { 161 { { USB_VENDOR_ASIX, USB_PRODUCT_ASIX_AX88172}, 0 }, 162 { { USB_VENDOR_COREGA, USB_PRODUCT_COREGA_FETHER_USB2_TX }, 0}, 163 { { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DUBE100}, 0 }, 164 { { USB_VENDOR_LINKSYS2, USB_PRODUCT_LINKSYS2_USB200M}, 0 }, 165 { { USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUAU2KTX}, 0 }, 166 { { USB_VENDOR_NETGEAR, USB_PRODUCT_NETGEAR_FA120}, 0 }, 167 { { USB_VENDOR_SITECOM, USB_PRODUCT_SITECOM_LN029}, 0 }, 168 { { USB_VENDOR_SYSTEMTALKS, USB_PRODUCT_SYSTEMTALKS_SGCX2UL}, 0 }, 169 }; 170 #define axe_lookup(v, p) ((const struct axe_type *)usb_lookup(axe_devs, v, p)) 171 172 USB_DECLARE_DRIVER(axe); 173 174 Static int axe_tx_list_init(struct axe_softc *); 175 Static int axe_rx_list_init(struct axe_softc *); 176 Static int axe_newbuf(struct axe_softc *, struct axe_chain *, struct mbuf *); 177 Static int axe_encap(struct axe_softc *, struct mbuf *, int); 178 Static void axe_rxeof(usbd_xfer_handle, usbd_private_handle, usbd_status); 179 Static void axe_txeof(usbd_xfer_handle, usbd_private_handle, usbd_status); 180 Static void axe_tick(void *); 181 Static void axe_tick_task(void *); 182 #if 0 183 Static void axe_rxstart(struct ifnet *); 184 #endif 185 Static void axe_start(struct ifnet *); 186 Static int axe_ioctl(struct ifnet *, u_long, caddr_t); 187 Static void axe_init(void *); 188 Static void axe_stop(struct axe_softc *); 189 Static void axe_watchdog(struct ifnet *); 190 Static int axe_miibus_readreg(device_ptr_t, int, int); 191 Static void axe_miibus_writereg(device_ptr_t, int, int, int); 192 Static void axe_miibus_statchg(device_ptr_t); 193 Static int axe_cmd(struct axe_softc *, int, int, int, void *); 194 Static int axe_ifmedia_upd(struct ifnet *); 195 Static void axe_ifmedia_sts(struct ifnet *, struct ifmediareq *); 196 Static void axe_reset(struct axe_softc *sc); 197 198 Static void axe_setmulti(struct axe_softc *); 199 Static void axe_lock_mii(struct axe_softc *sc); 200 Static void axe_unlock_mii(struct axe_softc *sc); 201 202 /* Get exclusive access to the MII registers */ 203 Static void 204 axe_lock_mii(struct axe_softc *sc) 205 { 206 sc->axe_refcnt++; 207 usb_lockmgr(&sc->axe_mii_lock, LK_EXCLUSIVE, NULL); 208 } 209 210 Static void 211 axe_unlock_mii(struct axe_softc *sc) 212 { 213 usb_lockmgr(&sc->axe_mii_lock, LK_RELEASE, NULL); 214 if (--sc->axe_refcnt < 0) 215 usb_detach_wakeup(USBDEV(sc->axe_dev)); 216 } 217 218 Static int 219 axe_cmd(struct axe_softc *sc, int cmd, int index, int val, void *buf) 220 { 221 usb_device_request_t req; 222 usbd_status err; 223 224 if (sc->axe_dying) 225 return(0); 226 227 axe_lock_mii(sc); 228 if (AXE_CMD_DIR(cmd)) 229 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 230 else 231 req.bmRequestType = UT_READ_VENDOR_DEVICE; 232 req.bRequest = AXE_CMD_CMD(cmd); 233 USETW(req.wValue, val); 234 USETW(req.wIndex, index); 235 USETW(req.wLength, AXE_CMD_LEN(cmd)); 236 237 err = usbd_do_request(sc->axe_udev, &req, buf); 238 axe_unlock_mii(sc); 239 240 if (err) 241 return(-1); 242 243 return(0); 244 } 245 246 Static int 247 axe_miibus_readreg(device_ptr_t dev, int phy, int reg) 248 { 249 struct axe_softc *sc = USBGETSOFTC(dev); 250 usbd_status err; 251 u_int16_t val; 252 253 if (sc->axe_dying) { 254 DPRINTF(("axe: dying\n")); 255 return(0); 256 } 257 258 #ifdef notdef 259 /* 260 * The chip tells us the MII address of any supported 261 * PHYs attached to the chip, so only read from those. 262 */ 263 264 if (sc->axe_phyaddrs[0] != AXE_NOPHY && phy != sc->axe_phyaddrs[0]) 265 return (0); 266 267 if (sc->axe_phyaddrs[1] != AXE_NOPHY && phy != sc->axe_phyaddrs[1]) 268 return (0); 269 #endif 270 if (sc->axe_phyaddrs[0] != 0xFF && sc->axe_phyaddrs[0] != phy) 271 return (0); 272 273 val = 0; 274 275 axe_lock_mii(sc); 276 axe_cmd(sc, AXE_CMD_MII_OPMODE_SW, 0, 0, NULL); 277 err = axe_cmd(sc, AXE_CMD_MII_READ_REG, reg, phy, (void *)&val); 278 axe_cmd(sc, AXE_CMD_MII_OPMODE_HW, 0, 0, NULL); 279 axe_unlock_mii(sc); 280 281 if (err) { 282 printf("%s: read PHY failed\n", USBDEVNAME(sc->axe_dev)); 283 return(-1); 284 } 285 286 if (val) 287 sc->axe_phyaddrs[0] = phy; 288 289 return (val); 290 } 291 292 Static void 293 axe_miibus_writereg(device_ptr_t dev, int phy, int reg, int val) 294 { 295 struct axe_softc *sc = USBGETSOFTC(dev); 296 usbd_status err; 297 298 if (sc->axe_dying) 299 return; 300 301 axe_lock_mii(sc); 302 axe_cmd(sc, AXE_CMD_MII_OPMODE_SW, 0, 0, NULL); 303 err = axe_cmd(sc, AXE_CMD_MII_WRITE_REG, reg, phy, (void *)&val); 304 axe_cmd(sc, AXE_CMD_MII_OPMODE_HW, 0, 0, NULL); 305 axe_unlock_mii(sc); 306 307 if (err) { 308 printf("%s: write PHY failed\n", USBDEVNAME(sc->axe_dev)); 309 return; 310 } 311 } 312 313 Static void 314 axe_miibus_statchg(device_ptr_t dev) 315 { 316 struct axe_softc *sc = USBGETSOFTC(dev); 317 struct mii_data *mii = GET_MII(sc); 318 int val, err; 319 320 if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) 321 val = AXE_MEDIA_FULL_DUPLEX; 322 else 323 val = 0; 324 DPRINTF(("axe_miibus_statchg: val=0x%x\n", val)); 325 err = axe_cmd(sc, AXE_CMD_WRITE_MEDIA, 0, val, NULL); 326 if (err) { 327 printf("%s: media change failed\n", USBDEVNAME(sc->axe_dev)); 328 return; 329 } 330 } 331 332 /* 333 * Set media options. 334 */ 335 Static int 336 axe_ifmedia_upd(struct ifnet *ifp) 337 { 338 struct axe_softc *sc = ifp->if_softc; 339 struct mii_data *mii = GET_MII(sc); 340 341 sc->axe_link = 0; 342 if (mii->mii_instance) { 343 struct mii_softc *miisc; 344 LIST_FOREACH(miisc, &mii->mii_phys, mii_list) 345 mii_phy_reset(miisc); 346 } 347 mii_mediachg(mii); 348 349 return (0); 350 } 351 352 /* 353 * Report current media status. 354 */ 355 Static void 356 axe_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 357 { 358 struct axe_softc *sc = ifp->if_softc; 359 struct mii_data *mii = GET_MII(sc); 360 361 mii_pollstat(mii); 362 ifmr->ifm_active = mii->mii_media_active; 363 ifmr->ifm_status = mii->mii_media_status; 364 } 365 366 Static void 367 axe_setmulti(struct axe_softc *sc) 368 { 369 struct ifnet *ifp; 370 struct ether_multi *enm; 371 struct ether_multistep step; 372 u_int32_t h = 0; 373 u_int16_t rxmode; 374 u_int8_t hashtbl[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; 375 376 if (sc->axe_dying) 377 return; 378 379 ifp = GET_IFP(sc); 380 381 axe_cmd(sc, AXE_CMD_RXCTL_READ, 0, 0, (void *)&rxmode); 382 383 if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { 384 allmulti: 385 rxmode |= AXE_RXCMD_ALLMULTI; 386 axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL); 387 return; 388 } else 389 rxmode &= ~AXE_RXCMD_ALLMULTI; 390 391 /* now program new ones */ 392 #if defined(__NetBSD__) 393 ETHER_FIRST_MULTI(step, &sc->axe_ec, enm); 394 #else 395 ETHER_FIRST_MULTI(step, &sc->arpcom, enm); 396 #endif 397 while (enm != NULL) { 398 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, 399 ETHER_ADDR_LEN) != 0) 400 goto allmulti; 401 402 h = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN) >> 26; 403 hashtbl[h / 8] |= 1 << (h % 8); 404 ETHER_NEXT_MULTI(step, enm); 405 } 406 407 ifp->if_flags &= ~IFF_ALLMULTI; 408 axe_cmd(sc, AXE_CMD_WRITE_MCAST, 0, 0, (void *)&hashtbl); 409 axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL); 410 return; 411 } 412 413 Static void 414 axe_reset(struct axe_softc *sc) 415 { 416 if (sc->axe_dying) 417 return; 418 /* XXX What to reset? */ 419 420 /* Wait a little while for the chip to get its brains in order. */ 421 DELAY(1000); 422 return; 423 } 424 425 /* 426 * Probe for a AX88172 chip. 427 */ 428 USB_MATCH(axe) 429 { 430 USB_MATCH_START(axe, uaa); 431 432 if (!uaa->iface) { 433 return(UMATCH_NONE); 434 } 435 436 return (axe_lookup(uaa->vendor, uaa->product) != NULL ? 437 UMATCH_VENDOR_PRODUCT : UMATCH_NONE); 438 } 439 440 /* 441 * Attach the interface. Allocate softc structures, do ifmedia 442 * setup and ethernet/BPF attach. 443 */ 444 USB_ATTACH(axe) 445 { 446 USB_ATTACH_START(axe, sc, uaa); 447 usbd_device_handle dev = uaa->device; 448 usbd_status err; 449 usb_interface_descriptor_t *id; 450 usb_endpoint_descriptor_t *ed; 451 struct mii_data *mii; 452 u_char eaddr[ETHER_ADDR_LEN]; 453 char *devinfop; 454 char *devname = USBDEVNAME(sc->axe_dev); 455 struct ifnet *ifp; 456 int i, s; 457 458 devinfop = usbd_devinfo_alloc(dev, 0); 459 USB_ATTACH_SETUP; 460 461 err = usbd_set_config_no(dev, AXE_CONFIG_NO, 1); 462 if (err) { 463 printf("%s: getting interface handle failed\n", 464 USBDEVNAME(sc->axe_dev)); 465 USB_ATTACH_ERROR_RETURN; 466 } 467 468 usb_init_task(&sc->axe_tick_task, axe_tick_task, sc); 469 lockinit(&sc->axe_mii_lock, PZERO, "axemii", 0, LK_CANRECURSE); 470 usb_init_task(&sc->axe_stop_task, (void (*)(void *))axe_stop, sc); 471 472 err = usbd_device2interface_handle(dev, AXE_IFACE_IDX, &sc->axe_iface); 473 if (err) { 474 printf("%s: getting interface handle failed\n", 475 USBDEVNAME(sc->axe_dev)); 476 USB_ATTACH_ERROR_RETURN; 477 } 478 479 sc->axe_udev = dev; 480 sc->axe_product = uaa->product; 481 sc->axe_vendor = uaa->vendor; 482 483 id = usbd_get_interface_descriptor(sc->axe_iface); 484 485 printf("%s: %s\n", USBDEVNAME(sc->axe_dev), devinfop); 486 usbd_devinfo_free(devinfop); 487 488 /* Find endpoints. */ 489 for (i = 0; i < id->bNumEndpoints; i++) { 490 ed = usbd_interface2endpoint_descriptor(sc->axe_iface, i); 491 if (!ed) { 492 printf("%s: couldn't get ep %d\n", 493 USBDEVNAME(sc->axe_dev), i); 494 USB_ATTACH_ERROR_RETURN; 495 } 496 if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 497 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 498 sc->axe_ed[AXE_ENDPT_RX] = ed->bEndpointAddress; 499 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && 500 UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { 501 sc->axe_ed[AXE_ENDPT_TX] = ed->bEndpointAddress; 502 } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && 503 UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { 504 sc->axe_ed[AXE_ENDPT_INTR] = ed->bEndpointAddress; 505 } 506 } 507 508 s = splnet(); 509 510 /* 511 * Get station address. 512 */ 513 axe_cmd(sc, AXE_CMD_READ_NODEID, 0, 0, &eaddr); 514 515 /* 516 * Load IPG values and PHY indexes. 517 */ 518 axe_cmd(sc, AXE_CMD_READ_IPG012, 0, 0, (void *)&sc->axe_ipgs); 519 axe_cmd(sc, AXE_CMD_READ_PHYID, 0, 0, (void *)&sc->axe_phyaddrs); 520 521 /* 522 * Work around broken adapters that appear to lie about 523 * their PHY addresses. 524 */ 525 sc->axe_phyaddrs[0] = sc->axe_phyaddrs[1] = 0xFF; 526 527 /* 528 * An ASIX chip was detected. Inform the world. 529 */ 530 printf("%s: Ethernet address %s\n", USBDEVNAME(sc->axe_dev), 531 ether_sprintf(eaddr)); 532 533 /* Initialize interface info.*/ 534 ifp = GET_IFP(sc); 535 ifp->if_softc = sc; 536 strncpy(ifp->if_xname, devname, IFNAMSIZ); 537 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 538 ifp->if_ioctl = axe_ioctl; 539 ifp->if_start = axe_start; 540 541 ifp->if_watchdog = axe_watchdog; 542 543 /* ifp->if_baudrate = 10000000; */ 544 /* ifp->if_snd.ifq_maxlen = IFQ_MAXLEN;*/ 545 546 IFQ_SET_READY(&ifp->if_snd); 547 548 /* Initialize MII/media info. */ 549 mii = &sc->axe_mii; 550 mii->mii_ifp = ifp; 551 mii->mii_readreg = axe_miibus_readreg; 552 mii->mii_writereg = axe_miibus_writereg; 553 mii->mii_statchg = axe_miibus_statchg; 554 mii->mii_flags = MIIF_AUTOTSLEEP; 555 556 ifmedia_init(&mii->mii_media, 0, axe_ifmedia_upd, axe_ifmedia_sts); 557 mii_attach(self, mii, 0xffffffff, MII_PHY_ANY, MII_OFFSET_ANY, 0); 558 559 if (LIST_FIRST(&mii->mii_phys) == NULL) { 560 ifmedia_add(&mii->mii_media, IFM_ETHER | IFM_NONE, 0, NULL); 561 ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_NONE); 562 } else 563 ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_AUTO); 564 565 /* Attach the interface. */ 566 if_attach(ifp); 567 Ether_ifattach(ifp, eaddr); 568 #if NRND > 0 569 rnd_attach_source(&sc->rnd_source, USBDEVNAME(sc->axe_dev), 570 RND_TYPE_NET, 0); 571 #endif 572 573 usb_callout_init(sc->axe_stat_ch); 574 575 sc->axe_attached = 1; 576 splx(s); 577 578 usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->axe_udev, 579 USBDEV(sc->axe_dev)); 580 581 USB_ATTACH_SUCCESS_RETURN; 582 } 583 584 USB_DETACH(axe) 585 { 586 USB_DETACH_START(axe, sc); 587 int s; 588 struct ifnet *ifp = GET_IFP(sc); 589 590 DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->axe_dev), __func__)); 591 592 /* Detached before attached finished, so just bail out. */ 593 if (!sc->axe_attached) 594 return (0); 595 596 usb_uncallout(sc->axe_stat_ch, axe_tick, sc); 597 598 sc->axe_dying = 1; 599 600 ether_ifdetach(ifp); 601 602 if (sc->axe_ep[AXE_ENDPT_TX] != NULL) 603 usbd_abort_pipe(sc->axe_ep[AXE_ENDPT_TX]); 604 if (sc->axe_ep[AXE_ENDPT_RX] != NULL) 605 usbd_abort_pipe(sc->axe_ep[AXE_ENDPT_RX]); 606 if (sc->axe_ep[AXE_ENDPT_INTR] != NULL) 607 usbd_abort_pipe(sc->axe_ep[AXE_ENDPT_INTR]); 608 609 /* 610 * Remove any pending tasks. They cannot be executing because they run 611 * in the same thread as detach. 612 */ 613 usb_rem_task(sc->axe_udev, &sc->axe_tick_task); 614 usb_rem_task(sc->axe_udev, &sc->axe_stop_task); 615 616 s = splusb(); 617 618 if (--sc->axe_refcnt >= 0) { 619 /* Wait for processes to go away */ 620 usb_detach_wait(USBDEV(sc->axe_dev)); 621 } 622 623 if (ifp->if_flags & IFF_RUNNING) 624 axe_stop(sc); 625 626 #if defined(__NetBSD__) 627 #if NRND > 0 628 rnd_detach_source(&sc->rnd_source); 629 #endif 630 #endif /* __NetBSD__ */ 631 mii_detach(&sc->axe_mii, MII_PHY_ANY, MII_OFFSET_ANY); 632 ifmedia_delete_instance(&sc->axe_mii.mii_media, IFM_INST_ANY); 633 ether_ifdetach(ifp); 634 if_detach(ifp); 635 636 #ifdef DIAGNOSTIC 637 if (sc->axe_ep[AXE_ENDPT_TX] != NULL || 638 sc->axe_ep[AXE_ENDPT_RX] != NULL || 639 sc->axe_ep[AXE_ENDPT_INTR] != NULL) 640 printf("%s: detach has active endpoints\n", 641 USBDEVNAME(sc->axe_dev)); 642 #endif 643 644 sc->axe_attached = 0; 645 646 if (--sc->axe_refcnt >= 0) { 647 /* Wait for processes to go away. */ 648 usb_detach_wait(USBDEV(sc->axe_dev)); 649 } 650 splx(s); 651 652 usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->axe_udev, 653 USBDEV(sc->axe_dev)); 654 655 return (0); 656 } 657 658 int 659 axe_activate(device_ptr_t self, enum devact act) 660 { 661 struct axe_softc *sc = (struct axe_softc *)self; 662 663 DPRINTFN(2,("%s: %s: enter\n", USBDEVNAME(sc->axe_dev), __func__)); 664 665 switch (act) { 666 case DVACT_ACTIVATE: 667 return (EOPNOTSUPP); 668 break; 669 670 case DVACT_DEACTIVATE: 671 if_deactivate(&sc->axe_ec.ec_if); 672 sc->axe_dying = 1; 673 break; 674 } 675 return (0); 676 } 677 678 /* 679 * Initialize an RX descriptor and attach an MBUF cluster. 680 */ 681 Static int 682 axe_newbuf(struct axe_softc *sc, struct axe_chain *c, struct mbuf *m) 683 { 684 struct mbuf *m_new = NULL; 685 686 DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->axe_dev),__func__)); 687 688 if (m == NULL) { 689 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 690 if (m_new == NULL) { 691 printf("%s: no memory for rx list " 692 "-- packet dropped!\n", USBDEVNAME(sc->axe_dev)); 693 return (ENOBUFS); 694 } 695 696 MCLGET(m_new, M_DONTWAIT); 697 if (!(m_new->m_flags & M_EXT)) { 698 printf("%s: no memory for rx list " 699 "-- packet dropped!\n", USBDEVNAME(sc->axe_dev)); 700 m_freem(m_new); 701 return (ENOBUFS); 702 } 703 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 704 } else { 705 m_new = m; 706 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 707 m_new->m_data = m_new->m_ext.ext_buf; 708 } 709 710 m_adj(m_new, ETHER_ALIGN); 711 c->axe_mbuf = m_new; 712 713 return (0); 714 } 715 716 Static int 717 axe_rx_list_init(struct axe_softc *sc) 718 { 719 struct axe_cdata *cd; 720 struct axe_chain *c; 721 int i; 722 723 DPRINTF(("%s: %s: enter\n", USBDEVNAME(sc->axe_dev), __func__)); 724 725 cd = &sc->axe_cdata; 726 for (i = 0; i < AXE_RX_LIST_CNT; i++) { 727 c = &cd->axe_rx_chain[i]; 728 c->axe_sc = sc; 729 c->axe_idx = i; 730 if (axe_newbuf(sc, c, NULL) == ENOBUFS) 731 return (ENOBUFS); 732 if (c->axe_xfer == NULL) { 733 c->axe_xfer = usbd_alloc_xfer(sc->axe_udev); 734 if (c->axe_xfer == NULL) 735 return (ENOBUFS); 736 c->axe_buf = usbd_alloc_buffer(c->axe_xfer, AXE_BUFSZ); 737 if (c->axe_buf == NULL) { 738 usbd_free_xfer(c->axe_xfer); 739 return (ENOBUFS); 740 } 741 } 742 } 743 744 return (0); 745 } 746 747 Static int 748 axe_tx_list_init(struct axe_softc *sc) 749 { 750 struct axe_cdata *cd; 751 struct axe_chain *c; 752 int i; 753 754 DPRINTF(("%s: %s: enter\n", USBDEVNAME(sc->axe_dev), __func__)); 755 756 cd = &sc->axe_cdata; 757 for (i = 0; i < AXE_TX_LIST_CNT; i++) { 758 c = &cd->axe_tx_chain[i]; 759 c->axe_sc = sc; 760 c->axe_idx = i; 761 c->axe_mbuf = NULL; 762 if (c->axe_xfer == NULL) { 763 c->axe_xfer = usbd_alloc_xfer(sc->axe_udev); 764 if (c->axe_xfer == NULL) 765 return (ENOBUFS); 766 c->axe_buf = usbd_alloc_buffer(c->axe_xfer, AXE_BUFSZ); 767 if (c->axe_buf == NULL) { 768 usbd_free_xfer(c->axe_xfer); 769 return (ENOBUFS); 770 } 771 } 772 } 773 774 return (0); 775 } 776 777 #if 0 778 Static void 779 axe_rxstart(struct ifnet *ifp) 780 { 781 struct axe_softc *sc; 782 struct axe_chain *c; 783 784 sc = ifp->if_softc; 785 axe_lock_mii(sc); 786 c = &sc->axe_cdata.axe_rx_chain[sc->axe_cdata.axe_rx_prod]; 787 788 if (axe_newbuf(sc, c, NULL) == ENOBUFS) { 789 ifp->if_ierrors++; 790 axe_unlock_mii(sc); 791 return; 792 } 793 794 /* Setup new transfer. */ 795 usbd_setup_xfer(c->axe_xfer, sc->axe_ep[AXE_ENDPT_RX], 796 c, mtod(c->axe_mbuf, char *), AXE_BUFSZ, USBD_SHORT_XFER_OK, 797 USBD_NO_TIMEOUT, axe_rxeof); 798 usbd_transfer(c->axe_xfer); 799 axe_unlock_mii(sc); 800 801 return; 802 } 803 #endif 804 805 /* 806 * A frame has been uploaded: pass the resulting mbuf chain up to 807 * the higher level protocols. 808 */ 809 Static void 810 axe_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) 811 { 812 struct axe_softc *sc; 813 struct axe_chain *c; 814 struct ifnet *ifp; 815 struct mbuf *m; 816 u_int32_t total_len; 817 int s; 818 819 c = priv; 820 sc = c->axe_sc; 821 ifp = GET_IFP(sc); 822 823 DPRINTFN(10,("%s: %s: enter\n", USBDEVNAME(sc->axe_dev),__func__)); 824 825 if (sc->axe_dying) 826 return; 827 828 if (!(ifp->if_flags & IFF_RUNNING)) 829 return; 830 831 if (status != USBD_NORMAL_COMPLETION) { 832 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) 833 return; 834 if (usbd_ratecheck(&sc->axe_rx_notice)) { 835 printf("%s: usb errors on rx: %s\n", 836 USBDEVNAME(sc->axe_dev), usbd_errstr(status)); 837 } 838 if (status == USBD_STALLED) 839 usbd_clear_endpoint_stall(sc->axe_ep[AXE_ENDPT_RX]); 840 goto done; 841 } 842 843 usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL); 844 845 m = c->axe_mbuf; 846 847 if (total_len <= sizeof(struct ether_header)) { 848 ifp->if_ierrors++; 849 goto done; 850 } 851 852 ifp->if_ipackets++; 853 m->m_pkthdr.rcvif = ifp; 854 m->m_pkthdr.len = m->m_len = total_len; 855 856 857 memcpy(mtod(c->axe_mbuf, char *), c->axe_buf, total_len); 858 859 /* No errors; receive the packet. */ 860 total_len -= ETHER_CRC_LEN + 4; 861 862 s = splnet(); 863 864 /* XXX ugly */ 865 if (axe_newbuf(sc, c, NULL) == ENOBUFS) { 866 ifp->if_ierrors++; 867 goto done1; 868 } 869 870 #if NBPFILTER > 0 871 if (ifp->if_bpf) 872 BPF_MTAP(ifp, m); 873 #endif 874 875 DPRINTFN(10,("%s: %s: deliver %d\n", USBDEVNAME(sc->axe_dev), 876 __func__, m->m_len)); 877 IF_INPUT(ifp, m); 878 done1: 879 splx(s); 880 881 done: 882 883 /* Setup new transfer. */ 884 usbd_setup_xfer(xfer, sc->axe_ep[AXE_ENDPT_RX], 885 c, c->axe_buf, AXE_BUFSZ, 886 USBD_SHORT_XFER_OK | USBD_NO_COPY, 887 USBD_NO_TIMEOUT, axe_rxeof); 888 usbd_transfer(xfer); 889 890 DPRINTFN(10,("%s: %s: start rx\n", USBDEVNAME(sc->axe_dev), 891 __func__)); 892 return; 893 } 894 895 /* 896 * A frame was downloaded to the chip. It's safe for us to clean up 897 * the list buffers. 898 */ 899 900 Static void 901 axe_txeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) 902 { 903 struct axe_softc *sc; 904 struct axe_chain *c; 905 struct ifnet *ifp; 906 int s; 907 908 c = priv; 909 sc = c->axe_sc; 910 ifp = GET_IFP(sc); 911 912 if (sc->axe_dying) 913 return; 914 915 s = splnet(); 916 917 if (status != USBD_NORMAL_COMPLETION) { 918 if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) { 919 splx(s); 920 return; 921 } 922 ifp->if_oerrors++; 923 printf("%s: usb error on tx: %s\n", USBDEVNAME(sc->axe_dev), 924 usbd_errstr(status)); 925 if (status == USBD_STALLED) 926 usbd_clear_endpoint_stall(sc->axe_ep[AXE_ENDPT_TX]); 927 splx(s); 928 return; 929 } 930 931 ifp->if_timer = 0; 932 ifp->if_flags &= ~IFF_OACTIVE; 933 934 m_freem(c->axe_mbuf); 935 c->axe_mbuf = NULL; 936 937 if (IFQ_IS_EMPTY(&ifp->if_snd) == 0) 938 axe_start(ifp); 939 940 ifp->if_opackets++; 941 splx(s); 942 return; 943 } 944 945 Static void 946 axe_tick(void *xsc) 947 { 948 struct axe_softc *sc = xsc; 949 950 if (sc == NULL) 951 return; 952 953 DPRINTFN(0xff, ("%s: %s: enter\n", USBDEVNAME(sc->axe_dev), 954 __func__)); 955 956 if (sc->axe_dying) 957 return; 958 959 /* Perform periodic stuff in process context */ 960 usb_add_task(sc->axe_udev, &sc->axe_tick_task); 961 962 } 963 964 Static void 965 axe_tick_task(void *xsc) 966 { 967 int s; 968 struct axe_softc *sc; 969 struct ifnet *ifp; 970 struct mii_data *mii; 971 972 sc = xsc; 973 974 if (sc == NULL) 975 return; 976 977 if (sc->axe_dying) 978 return; 979 980 ifp = GET_IFP(sc); 981 mii = GET_MII(sc); 982 if (mii == NULL) 983 return; 984 985 s = splnet(); 986 987 mii_tick(mii); 988 if (!sc->axe_link) { 989 mii_pollstat(mii); 990 if (mii->mii_media_status & IFM_ACTIVE && 991 IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { 992 DPRINTF(("%s: %s: got link\n", 993 USBDEVNAME(sc->axe_dev), __func__)); 994 sc->axe_link++; 995 if (IFQ_IS_EMPTY(&ifp->if_snd) == 0) 996 axe_start(ifp); 997 } 998 } 999 1000 usb_callout(sc->axe_stat_ch, hz, axe_tick, sc); 1001 1002 splx(s); 1003 } 1004 1005 Static int 1006 axe_encap(struct axe_softc *sc, struct mbuf *m, int idx) 1007 { 1008 struct axe_chain *c; 1009 usbd_status err; 1010 1011 c = &sc->axe_cdata.axe_tx_chain[idx]; 1012 1013 /* 1014 * Copy the mbuf data into a contiguous buffer, leaving two 1015 * bytes at the beginning to hold the frame length. 1016 */ 1017 m_copydata(m, 0, m->m_pkthdr.len, c->axe_buf); 1018 c->axe_mbuf = m; 1019 1020 usbd_setup_xfer(c->axe_xfer, sc->axe_ep[AXE_ENDPT_TX], 1021 c, c->axe_buf, m->m_pkthdr.len, USBD_FORCE_SHORT_XFER, 10000, 1022 axe_txeof); 1023 1024 /* Transmit */ 1025 err = usbd_transfer(c->axe_xfer); 1026 if (err != USBD_IN_PROGRESS) { 1027 axe_stop(sc); 1028 return(EIO); 1029 } 1030 1031 sc->axe_cdata.axe_tx_cnt++; 1032 1033 return(0); 1034 } 1035 1036 Static void 1037 axe_start(struct ifnet *ifp) 1038 { 1039 struct axe_softc *sc; 1040 struct mbuf *m_head = NULL; 1041 1042 sc = ifp->if_softc; 1043 1044 if (!sc->axe_link) { 1045 return; 1046 } 1047 1048 if (ifp->if_flags & IFF_OACTIVE) { 1049 return; 1050 } 1051 1052 IF_DEQUEUE(&ifp->if_snd, m_head); 1053 if (m_head == NULL) { 1054 return; 1055 } 1056 1057 if (axe_encap(sc, m_head, 0)) { 1058 IF_PREPEND(&ifp->if_snd, m_head); 1059 ifp->if_flags |= IFF_OACTIVE; 1060 return; 1061 } 1062 1063 /* 1064 * If there's a BPF listener, bounce a copy of this frame 1065 * to him. 1066 */ 1067 #if NBPFILTER > 0 1068 if (ifp->if_bpf) 1069 BPF_MTAP(ifp, m_head); 1070 #endif 1071 1072 ifp->if_flags |= IFF_OACTIVE; 1073 1074 /* 1075 * Set a timeout in case the chip goes out to lunch. 1076 */ 1077 ifp->if_timer = 5; 1078 1079 return; 1080 } 1081 1082 Static void 1083 axe_init(void *xsc) 1084 { 1085 struct axe_softc *sc = xsc; 1086 struct ifnet *ifp = GET_IFP(sc); 1087 struct axe_chain *c; 1088 usbd_status err; 1089 int rxmode; 1090 int i, s; 1091 1092 if (ifp->if_flags & IFF_RUNNING) 1093 return; 1094 1095 s = splnet(); 1096 1097 /* 1098 * Cancel pending I/O and free all RX/TX buffers. 1099 */ 1100 axe_reset(sc); 1101 1102 /* Enable RX logic. */ 1103 1104 /* Init RX ring. */ 1105 if (axe_rx_list_init(sc) == ENOBUFS) { 1106 printf("%s: rx list init failed\n", USBDEVNAME(sc->axe_dev)); 1107 splx(s); 1108 return; 1109 } 1110 1111 /* Init TX ring. */ 1112 if (axe_tx_list_init(sc) == ENOBUFS) { 1113 printf("%s: tx list init failed\n", USBDEVNAME(sc->axe_dev)); 1114 splx(s); 1115 return; 1116 } 1117 1118 /* Set transmitter IPG values */ 1119 axe_cmd(sc, AXE_CMD_WRITE_IPG0, 0, sc->axe_ipgs[0], NULL); 1120 axe_cmd(sc, AXE_CMD_WRITE_IPG1, 0, sc->axe_ipgs[1], NULL); 1121 axe_cmd(sc, AXE_CMD_WRITE_IPG2, 0, sc->axe_ipgs[2], NULL); 1122 1123 /* Enable receiver, set RX mode */ 1124 rxmode = AXE_RXCMD_UNICAST|AXE_RXCMD_MULTICAST|AXE_RXCMD_ENABLE; 1125 1126 /* If we want promiscuous mode, set the allframes bit. */ 1127 if (ifp->if_flags & IFF_PROMISC) 1128 rxmode |= AXE_RXCMD_PROMISC; 1129 1130 if (ifp->if_flags & IFF_BROADCAST) 1131 rxmode |= AXE_RXCMD_BROADCAST; 1132 1133 axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL); 1134 1135 /* Load the multicast filter. */ 1136 axe_setmulti(sc); 1137 1138 /* Open RX and TX pipes. */ 1139 err = usbd_open_pipe(sc->axe_iface, sc->axe_ed[AXE_ENDPT_RX], 1140 USBD_EXCLUSIVE_USE, &sc->axe_ep[AXE_ENDPT_RX]); 1141 if (err) { 1142 printf("%s: open rx pipe failed: %s\n", 1143 USBDEVNAME(sc->axe_dev), usbd_errstr(err)); 1144 splx(s); 1145 return; 1146 } 1147 1148 err = usbd_open_pipe(sc->axe_iface, sc->axe_ed[AXE_ENDPT_TX], 1149 USBD_EXCLUSIVE_USE, &sc->axe_ep[AXE_ENDPT_TX]); 1150 if (err) { 1151 printf("%s: open tx pipe failed: %s\n", 1152 USBDEVNAME(sc->axe_dev), usbd_errstr(err)); 1153 splx(s); 1154 return; 1155 } 1156 1157 /* Start up the receive pipe. */ 1158 for (i = 0; i < AXE_RX_LIST_CNT; i++) { 1159 c = &sc->axe_cdata.axe_rx_chain[i]; 1160 usbd_setup_xfer(c->axe_xfer, sc->axe_ep[AXE_ENDPT_RX], 1161 c, mtod(c->axe_mbuf, char *), AXE_BUFSZ, 1162 USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, axe_rxeof); 1163 usbd_transfer(c->axe_xfer); 1164 } 1165 1166 ifp->if_flags |= IFF_RUNNING; 1167 ifp->if_flags &= ~IFF_OACTIVE; 1168 1169 splx(s); 1170 1171 usb_callout_init(sc->axe_stat_ch); 1172 usb_callout(sc->axe_stat_ch, hz, axe_tick, sc); 1173 return; 1174 } 1175 1176 Static int 1177 axe_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) 1178 { 1179 struct axe_softc *sc = ifp->if_softc; 1180 struct ifreq *ifr = (struct ifreq *)data; 1181 struct ifaddr *ifa = (struct ifaddr *)data; 1182 struct mii_data *mii; 1183 u_int16_t rxmode; 1184 int error = 0; 1185 1186 switch(cmd) { 1187 case SIOCSIFADDR: 1188 ifp->if_flags |= IFF_UP; 1189 axe_init(sc); 1190 1191 switch (ifa->ifa_addr->sa_family) { 1192 #ifdef INET 1193 case AF_INET: 1194 #if defined(__NetBSD__) 1195 arp_ifinit(ifp, ifa); 1196 #else 1197 arp_ifinit(&sc->arpcom, ifa); 1198 #endif 1199 break; 1200 #endif /* INET */ 1201 #ifdef NS 1202 case AF_NS: 1203 { 1204 struct ns_addr *ina = &IA_SNS(ifa)->sns_addr; 1205 1206 if (ns_nullhost(*ina)) 1207 ina->x_host = *(union ns_host *) 1208 LLADDR(ifp->if_sadl); 1209 else 1210 memcpy(LLADDR(ifp->if_sadl), 1211 ina->x_host.c_host, 1212 ifp->if_addrlen); 1213 break; 1214 } 1215 #endif /* NS */ 1216 } 1217 break; 1218 1219 case SIOCSIFMTU: 1220 if (ifr->ifr_mtu > ETHERMTU) 1221 error = EINVAL; 1222 else 1223 ifp->if_mtu = ifr->ifr_mtu; 1224 break; 1225 1226 case SIOCSIFFLAGS: 1227 if (ifp->if_flags & IFF_UP) { 1228 if (ifp->if_flags & IFF_RUNNING && 1229 ifp->if_flags & IFF_PROMISC && 1230 !(sc->axe_if_flags & IFF_PROMISC)) { 1231 1232 axe_cmd(sc, AXE_CMD_RXCTL_READ, 1233 0, 0, (void *)&rxmode); 1234 rxmode |= AXE_RXCMD_PROMISC; 1235 axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 1236 0, rxmode, NULL); 1237 1238 axe_setmulti(sc); 1239 } else if (ifp->if_flags & IFF_RUNNING && 1240 !(ifp->if_flags & IFF_PROMISC) && 1241 sc->axe_if_flags & IFF_PROMISC) { 1242 axe_cmd(sc, AXE_CMD_RXCTL_READ, 1243 0, 0, (void *)&rxmode); 1244 rxmode &= ~AXE_RXCMD_PROMISC; 1245 axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 1246 0, rxmode, NULL); 1247 axe_setmulti(sc); 1248 } else if (!(ifp->if_flags & IFF_RUNNING)) 1249 axe_init(sc); 1250 } else { 1251 if (ifp->if_flags & IFF_RUNNING) 1252 axe_stop(sc); 1253 } 1254 sc->axe_if_flags = ifp->if_flags; 1255 error = 0; 1256 break; 1257 case SIOCADDMULTI: 1258 case SIOCDELMULTI: 1259 #ifdef __NetBSD__ 1260 error = (cmd == SIOCADDMULTI) ? 1261 ether_addmulti(ifr, &sc->axe_ec) : 1262 ether_delmulti(ifr, &sc->axe_ec); 1263 #else 1264 error = (cmd == SIOCADDMULTI) ? 1265 ether_addmulti(ifr, &sc->arpcom) : 1266 ether_delmulti(ifr, &sc->arpcom); 1267 #endif /* __NetBSD__ */ 1268 if (error == ENETRESET) { 1269 /* 1270 * Multicast list has changed; set the hardware 1271 * filter accordingly. 1272 */ 1273 if (ifp->if_flags & IFF_RUNNING) 1274 axe_setmulti(sc); 1275 error = 0; 1276 } 1277 break; 1278 case SIOCGIFMEDIA: 1279 case SIOCSIFMEDIA: 1280 mii = GET_MII(sc); 1281 error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd); 1282 break; 1283 1284 default: 1285 error = EINVAL; 1286 break; 1287 } 1288 1289 return(error); 1290 } 1291 1292 /* 1293 * XXX 1294 * You can't call axe_txeof since the USB transfer has not 1295 * completed yet. 1296 */ 1297 Static void 1298 axe_watchdog(struct ifnet *ifp) 1299 { 1300 struct axe_softc *sc; 1301 struct axe_chain *c; 1302 usbd_status stat; 1303 int s; 1304 1305 sc = ifp->if_softc; 1306 1307 ifp->if_oerrors++; 1308 printf("%s: watchdog timeout\n", USBDEVNAME(sc->axe_dev)); 1309 1310 s = splusb(); 1311 c = &sc->axe_cdata.axe_tx_chain[0]; 1312 usbd_get_xfer_status(c->axe_xfer, NULL, NULL, NULL, &stat); 1313 axe_txeof(c->axe_xfer, c, stat); 1314 1315 if (ifp->if_snd.ifq_head != NULL) 1316 axe_start(ifp); 1317 splx(s); 1318 } 1319 1320 /* 1321 * Stop the adapter and free any mbufs allocated to the 1322 * RX and TX lists. 1323 */ 1324 Static void 1325 axe_stop(struct axe_softc *sc) 1326 { 1327 usbd_status err; 1328 struct ifnet *ifp; 1329 int i; 1330 1331 axe_reset(sc); 1332 1333 ifp = GET_IFP(sc); 1334 ifp->if_timer = 0; 1335 1336 usb_uncallout(sc->axe_stat_ch, axe_tick, sc); 1337 1338 /* Stop transfers. */ 1339 if (sc->axe_ep[AXE_ENDPT_RX] != NULL) { 1340 err = usbd_abort_pipe(sc->axe_ep[AXE_ENDPT_RX]); 1341 if (err) { 1342 printf("%s: abort rx pipe failed: %s\n", 1343 USBDEVNAME(sc->axe_dev), usbd_errstr(err)); 1344 } 1345 err = usbd_close_pipe(sc->axe_ep[AXE_ENDPT_RX]); 1346 if (err) { 1347 printf("%s: close rx pipe failed: %s\n", 1348 USBDEVNAME(sc->axe_dev), usbd_errstr(err)); 1349 } 1350 sc->axe_ep[AXE_ENDPT_RX] = NULL; 1351 } 1352 1353 if (sc->axe_ep[AXE_ENDPT_TX] != NULL) { 1354 err = usbd_abort_pipe(sc->axe_ep[AXE_ENDPT_TX]); 1355 if (err) { 1356 printf("%s: abort tx pipe failed: %s\n", 1357 USBDEVNAME(sc->axe_dev), usbd_errstr(err)); 1358 } 1359 err = usbd_close_pipe(sc->axe_ep[AXE_ENDPT_TX]); 1360 if (err) { 1361 printf("%s: close tx pipe failed: %s\n", 1362 USBDEVNAME(sc->axe_dev), usbd_errstr(err)); 1363 } 1364 sc->axe_ep[AXE_ENDPT_TX] = NULL; 1365 } 1366 1367 if (sc->axe_ep[AXE_ENDPT_INTR] != NULL) { 1368 err = usbd_abort_pipe(sc->axe_ep[AXE_ENDPT_INTR]); 1369 if (err) { 1370 printf("%s: abort intr pipe failed: %s\n", 1371 USBDEVNAME(sc->axe_dev), usbd_errstr(err)); 1372 } 1373 err = usbd_close_pipe(sc->axe_ep[AXE_ENDPT_INTR]); 1374 if (err) { 1375 printf("%s: close intr pipe failed: %s\n", 1376 USBDEVNAME(sc->axe_dev), usbd_errstr(err)); 1377 } 1378 sc->axe_ep[AXE_ENDPT_INTR] = NULL; 1379 } 1380 1381 /* Free RX resources. */ 1382 for (i = 0; i < AXE_RX_LIST_CNT; i++) { 1383 if (sc->axe_cdata.axe_rx_chain[i].axe_mbuf != NULL) { 1384 m_freem(sc->axe_cdata.axe_rx_chain[i].axe_mbuf); 1385 sc->axe_cdata.axe_rx_chain[i].axe_mbuf = NULL; 1386 } 1387 if (sc->axe_cdata.axe_rx_chain[i].axe_xfer != NULL) { 1388 usbd_free_xfer(sc->axe_cdata.axe_rx_chain[i].axe_xfer); 1389 sc->axe_cdata.axe_rx_chain[i].axe_xfer = NULL; 1390 } 1391 } 1392 1393 /* Free TX resources. */ 1394 for (i = 0; i < AXE_TX_LIST_CNT; i++) { 1395 if (sc->axe_cdata.axe_tx_chain[i].axe_mbuf != NULL) { 1396 m_freem(sc->axe_cdata.axe_tx_chain[i].axe_mbuf); 1397 sc->axe_cdata.axe_tx_chain[i].axe_mbuf = NULL; 1398 } 1399 if (sc->axe_cdata.axe_tx_chain[i].axe_xfer != NULL) { 1400 usbd_free_xfer(sc->axe_cdata.axe_tx_chain[i].axe_xfer); 1401 sc->axe_cdata.axe_tx_chain[i].axe_xfer = NULL; 1402 } 1403 } 1404 1405 sc->axe_link = 0; 1406 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 1407 } 1408 1409