1 /* $NetBSD: ehci.c,v 1.174 2011/04/20 09:32:43 drochner Exp $ */ 2 3 /* 4 * Copyright (c) 2004-2008 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Lennart Augustsson (lennart@augustsson.net), Charles M. Hannum and 9 * Jeremy Morse (jeremy.morse@gmail.com). 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * USB Enhanced Host Controller Driver, a.k.a. USB 2.0 controller. 35 * 36 * The EHCI 1.0 spec can be found at 37 * http://www.intel.com/technology/usb/spec.htm 38 * and the USB 2.0 spec at 39 * http://www.usb.org/developers/docs/ 40 * 41 */ 42 43 /* 44 * TODO: 45 * 1) hold off explorations by companion controllers until ehci has started. 46 * 47 * 2) The hub driver needs to handle and schedule the transaction translator, 48 * to assign place in frame where different devices get to go. See chapter 49 * on hubs in USB 2.0 for details. 50 * 51 * 3) Command failures are not recovered correctly. 52 */ 53 54 #include <sys/cdefs.h> 55 __KERNEL_RCSID(0, "$NetBSD: ehci.c,v 1.174 2011/04/20 09:32:43 drochner Exp $"); 56 57 #include "ohci.h" 58 #include "uhci.h" 59 60 #include <sys/param.h> 61 #include <sys/systm.h> 62 #include <sys/kernel.h> 63 #include <sys/malloc.h> 64 #include <sys/device.h> 65 #include <sys/select.h> 66 #include <sys/proc.h> 67 #include <sys/queue.h> 68 #include <sys/mutex.h> 69 #include <sys/bus.h> 70 71 #include <machine/endian.h> 72 73 #include <dev/usb/usb.h> 74 #include <dev/usb/usbdi.h> 75 #include <dev/usb/usbdivar.h> 76 #include <dev/usb/usb_mem.h> 77 #include <dev/usb/usb_quirks.h> 78 79 #include <dev/usb/ehcireg.h> 80 #include <dev/usb/ehcivar.h> 81 #include <dev/usb/usbroothub_subr.h> 82 83 #ifdef EHCI_DEBUG 84 #define DPRINTF(x) do { if (ehcidebug) printf x; } while(0) 85 #define DPRINTFN(n,x) do { if (ehcidebug>(n)) printf x; } while (0) 86 int ehcidebug = 0; 87 #else 88 #define DPRINTF(x) 89 #define DPRINTFN(n,x) 90 #endif 91 92 struct ehci_pipe { 93 struct usbd_pipe pipe; 94 int nexttoggle; 95 96 ehci_soft_qh_t *sqh; 97 union { 98 ehci_soft_qtd_t *qtd; 99 /* ehci_soft_itd_t *itd; */ 100 } tail; 101 union { 102 /* Control pipe */ 103 struct { 104 usb_dma_t reqdma; 105 u_int length; 106 } ctl; 107 /* Interrupt pipe */ 108 struct { 109 u_int length; 110 } intr; 111 /* Bulk pipe */ 112 struct { 113 u_int length; 114 } bulk; 115 /* Iso pipe */ 116 struct { 117 u_int next_frame; 118 u_int cur_xfers; 119 } isoc; 120 } u; 121 }; 122 123 Static usbd_status ehci_open(usbd_pipe_handle); 124 Static void ehci_poll(struct usbd_bus *); 125 Static void ehci_softintr(void *); 126 Static int ehci_intr1(ehci_softc_t *); 127 Static void ehci_waitintr(ehci_softc_t *, usbd_xfer_handle); 128 Static void ehci_check_intr(ehci_softc_t *, struct ehci_xfer *); 129 Static void ehci_check_qh_intr(ehci_softc_t *, struct ehci_xfer *); 130 Static void ehci_check_itd_intr(ehci_softc_t *, struct ehci_xfer *); 131 Static void ehci_idone(struct ehci_xfer *); 132 Static void ehci_timeout(void *); 133 Static void ehci_timeout_task(void *); 134 Static void ehci_intrlist_timeout(void *); 135 136 Static usbd_status ehci_allocm(struct usbd_bus *, usb_dma_t *, u_int32_t); 137 Static void ehci_freem(struct usbd_bus *, usb_dma_t *); 138 139 Static usbd_xfer_handle ehci_allocx(struct usbd_bus *); 140 Static void ehci_freex(struct usbd_bus *, usbd_xfer_handle); 141 142 Static usbd_status ehci_root_ctrl_transfer(usbd_xfer_handle); 143 Static usbd_status ehci_root_ctrl_start(usbd_xfer_handle); 144 Static void ehci_root_ctrl_abort(usbd_xfer_handle); 145 Static void ehci_root_ctrl_close(usbd_pipe_handle); 146 Static void ehci_root_ctrl_done(usbd_xfer_handle); 147 148 Static usbd_status ehci_root_intr_transfer(usbd_xfer_handle); 149 Static usbd_status ehci_root_intr_start(usbd_xfer_handle); 150 Static void ehci_root_intr_abort(usbd_xfer_handle); 151 Static void ehci_root_intr_close(usbd_pipe_handle); 152 Static void ehci_root_intr_done(usbd_xfer_handle); 153 154 Static usbd_status ehci_device_ctrl_transfer(usbd_xfer_handle); 155 Static usbd_status ehci_device_ctrl_start(usbd_xfer_handle); 156 Static void ehci_device_ctrl_abort(usbd_xfer_handle); 157 Static void ehci_device_ctrl_close(usbd_pipe_handle); 158 Static void ehci_device_ctrl_done(usbd_xfer_handle); 159 160 Static usbd_status ehci_device_bulk_transfer(usbd_xfer_handle); 161 Static usbd_status ehci_device_bulk_start(usbd_xfer_handle); 162 Static void ehci_device_bulk_abort(usbd_xfer_handle); 163 Static void ehci_device_bulk_close(usbd_pipe_handle); 164 Static void ehci_device_bulk_done(usbd_xfer_handle); 165 166 Static usbd_status ehci_device_intr_transfer(usbd_xfer_handle); 167 Static usbd_status ehci_device_intr_start(usbd_xfer_handle); 168 Static void ehci_device_intr_abort(usbd_xfer_handle); 169 Static void ehci_device_intr_close(usbd_pipe_handle); 170 Static void ehci_device_intr_done(usbd_xfer_handle); 171 172 Static usbd_status ehci_device_isoc_transfer(usbd_xfer_handle); 173 Static usbd_status ehci_device_isoc_start(usbd_xfer_handle); 174 Static void ehci_device_isoc_abort(usbd_xfer_handle); 175 Static void ehci_device_isoc_close(usbd_pipe_handle); 176 Static void ehci_device_isoc_done(usbd_xfer_handle); 177 178 Static void ehci_device_clear_toggle(usbd_pipe_handle pipe); 179 Static void ehci_noop(usbd_pipe_handle pipe); 180 181 Static void ehci_pcd(ehci_softc_t *, usbd_xfer_handle); 182 Static void ehci_disown(ehci_softc_t *, int, int); 183 184 Static ehci_soft_qh_t *ehci_alloc_sqh(ehci_softc_t *); 185 Static void ehci_free_sqh(ehci_softc_t *, ehci_soft_qh_t *); 186 187 Static ehci_soft_qtd_t *ehci_alloc_sqtd(ehci_softc_t *); 188 Static void ehci_free_sqtd(ehci_softc_t *, ehci_soft_qtd_t *); 189 Static usbd_status ehci_alloc_sqtd_chain(struct ehci_pipe *, 190 ehci_softc_t *, int, int, usbd_xfer_handle, 191 ehci_soft_qtd_t **, ehci_soft_qtd_t **); 192 Static void ehci_free_sqtd_chain(ehci_softc_t *, ehci_soft_qtd_t *, 193 ehci_soft_qtd_t *); 194 195 Static ehci_soft_itd_t *ehci_alloc_itd(ehci_softc_t *sc); 196 Static void ehci_free_itd(ehci_softc_t *sc, ehci_soft_itd_t *itd); 197 Static void ehci_rem_free_itd_chain(ehci_softc_t *sc, 198 struct ehci_xfer *exfer); 199 Static void ehci_abort_isoc_xfer(usbd_xfer_handle xfer, 200 usbd_status status); 201 202 Static usbd_status ehci_device_request(usbd_xfer_handle xfer); 203 204 Static usbd_status ehci_device_setintr(ehci_softc_t *, ehci_soft_qh_t *, 205 int ival); 206 207 Static void ehci_add_qh(ehci_soft_qh_t *, ehci_soft_qh_t *); 208 Static void ehci_rem_qh(ehci_softc_t *, ehci_soft_qh_t *, 209 ehci_soft_qh_t *); 210 Static void ehci_set_qh_qtd(ehci_soft_qh_t *, ehci_soft_qtd_t *); 211 Static void ehci_sync_hc(ehci_softc_t *); 212 213 Static void ehci_close_pipe(usbd_pipe_handle, ehci_soft_qh_t *); 214 Static void ehci_abort_xfer(usbd_xfer_handle, usbd_status); 215 216 #ifdef EHCI_DEBUG 217 Static void ehci_dump_regs(ehci_softc_t *); 218 void ehci_dump(void); 219 Static ehci_softc_t *theehci; 220 Static void ehci_dump_link(ehci_link_t, int); 221 Static void ehci_dump_sqtds(ehci_soft_qtd_t *); 222 Static void ehci_dump_sqtd(ehci_soft_qtd_t *); 223 Static void ehci_dump_qtd(ehci_qtd_t *); 224 Static void ehci_dump_sqh(ehci_soft_qh_t *); 225 #if notyet 226 Static void ehci_dump_sitd(struct ehci_soft_itd *itd); 227 Static void ehci_dump_itd(struct ehci_soft_itd *); 228 #endif 229 #ifdef DIAGNOSTIC 230 Static void ehci_dump_exfer(struct ehci_xfer *); 231 #endif 232 #endif 233 234 #define EHCI_NULL htole32(EHCI_LINK_TERMINATE) 235 236 #define EHCI_INTR_ENDPT 1 237 238 #define ehci_add_intr_list(sc, ex) \ 239 TAILQ_INSERT_TAIL(&(sc)->sc_intrhead, (ex), inext); 240 #define ehci_del_intr_list(sc, ex) \ 241 do { \ 242 TAILQ_REMOVE(&sc->sc_intrhead, (ex), inext); \ 243 (ex)->inext.tqe_prev = NULL; \ 244 } while (0) 245 #define ehci_active_intr_list(ex) ((ex)->inext.tqe_prev != NULL) 246 247 Static const struct usbd_bus_methods ehci_bus_methods = { 248 ehci_open, 249 ehci_softintr, 250 ehci_poll, 251 ehci_allocm, 252 ehci_freem, 253 ehci_allocx, 254 ehci_freex, 255 }; 256 257 Static const struct usbd_pipe_methods ehci_root_ctrl_methods = { 258 ehci_root_ctrl_transfer, 259 ehci_root_ctrl_start, 260 ehci_root_ctrl_abort, 261 ehci_root_ctrl_close, 262 ehci_noop, 263 ehci_root_ctrl_done, 264 }; 265 266 Static const struct usbd_pipe_methods ehci_root_intr_methods = { 267 ehci_root_intr_transfer, 268 ehci_root_intr_start, 269 ehci_root_intr_abort, 270 ehci_root_intr_close, 271 ehci_noop, 272 ehci_root_intr_done, 273 }; 274 275 Static const struct usbd_pipe_methods ehci_device_ctrl_methods = { 276 ehci_device_ctrl_transfer, 277 ehci_device_ctrl_start, 278 ehci_device_ctrl_abort, 279 ehci_device_ctrl_close, 280 ehci_noop, 281 ehci_device_ctrl_done, 282 }; 283 284 Static const struct usbd_pipe_methods ehci_device_intr_methods = { 285 ehci_device_intr_transfer, 286 ehci_device_intr_start, 287 ehci_device_intr_abort, 288 ehci_device_intr_close, 289 ehci_device_clear_toggle, 290 ehci_device_intr_done, 291 }; 292 293 Static const struct usbd_pipe_methods ehci_device_bulk_methods = { 294 ehci_device_bulk_transfer, 295 ehci_device_bulk_start, 296 ehci_device_bulk_abort, 297 ehci_device_bulk_close, 298 ehci_device_clear_toggle, 299 ehci_device_bulk_done, 300 }; 301 302 Static const struct usbd_pipe_methods ehci_device_isoc_methods = { 303 ehci_device_isoc_transfer, 304 ehci_device_isoc_start, 305 ehci_device_isoc_abort, 306 ehci_device_isoc_close, 307 ehci_noop, 308 ehci_device_isoc_done, 309 }; 310 311 static const uint8_t revbits[EHCI_MAX_POLLRATE] = { 312 0x00,0x40,0x20,0x60,0x10,0x50,0x30,0x70,0x08,0x48,0x28,0x68,0x18,0x58,0x38,0x78, 313 0x04,0x44,0x24,0x64,0x14,0x54,0x34,0x74,0x0c,0x4c,0x2c,0x6c,0x1c,0x5c,0x3c,0x7c, 314 0x02,0x42,0x22,0x62,0x12,0x52,0x32,0x72,0x0a,0x4a,0x2a,0x6a,0x1a,0x5a,0x3a,0x7a, 315 0x06,0x46,0x26,0x66,0x16,0x56,0x36,0x76,0x0e,0x4e,0x2e,0x6e,0x1e,0x5e,0x3e,0x7e, 316 0x01,0x41,0x21,0x61,0x11,0x51,0x31,0x71,0x09,0x49,0x29,0x69,0x19,0x59,0x39,0x79, 317 0x05,0x45,0x25,0x65,0x15,0x55,0x35,0x75,0x0d,0x4d,0x2d,0x6d,0x1d,0x5d,0x3d,0x7d, 318 0x03,0x43,0x23,0x63,0x13,0x53,0x33,0x73,0x0b,0x4b,0x2b,0x6b,0x1b,0x5b,0x3b,0x7b, 319 0x07,0x47,0x27,0x67,0x17,0x57,0x37,0x77,0x0f,0x4f,0x2f,0x6f,0x1f,0x5f,0x3f,0x7f, 320 }; 321 322 usbd_status 323 ehci_init(ehci_softc_t *sc) 324 { 325 u_int32_t vers, sparams, cparams, hcr; 326 u_int i; 327 usbd_status err; 328 ehci_soft_qh_t *sqh; 329 u_int ncomp; 330 331 DPRINTF(("ehci_init: start\n")); 332 #ifdef EHCI_DEBUG 333 theehci = sc; 334 #endif 335 336 sc->sc_offs = EREAD1(sc, EHCI_CAPLENGTH); 337 338 vers = EREAD2(sc, EHCI_HCIVERSION); 339 aprint_verbose("%s: EHCI version %x.%x\n", device_xname(sc->sc_dev), 340 vers >> 8, vers & 0xff); 341 342 sparams = EREAD4(sc, EHCI_HCSPARAMS); 343 DPRINTF(("ehci_init: sparams=0x%x\n", sparams)); 344 sc->sc_npcomp = EHCI_HCS_N_PCC(sparams); 345 ncomp = EHCI_HCS_N_CC(sparams); 346 if (ncomp != sc->sc_ncomp) { 347 aprint_verbose("%s: wrong number of companions (%d != %d)\n", 348 device_xname(sc->sc_dev), ncomp, sc->sc_ncomp); 349 #if NOHCI == 0 || NUHCI == 0 350 aprint_error("%s: ohci or uhci probably not configured\n", 351 device_xname(sc->sc_dev)); 352 #endif 353 if (ncomp < sc->sc_ncomp) 354 sc->sc_ncomp = ncomp; 355 } 356 if (sc->sc_ncomp > 0) { 357 KASSERT(!(sc->sc_flags & EHCIF_ETTF)); 358 aprint_normal("%s: companion controller%s, %d port%s each:", 359 device_xname(sc->sc_dev), sc->sc_ncomp!=1 ? "s" : "", 360 EHCI_HCS_N_PCC(sparams), 361 EHCI_HCS_N_PCC(sparams)!=1 ? "s" : ""); 362 for (i = 0; i < sc->sc_ncomp; i++) 363 aprint_normal(" %s", device_xname(sc->sc_comps[i])); 364 aprint_normal("\n"); 365 } 366 sc->sc_noport = EHCI_HCS_N_PORTS(sparams); 367 cparams = EREAD4(sc, EHCI_HCCPARAMS); 368 DPRINTF(("ehci_init: cparams=0x%x\n", cparams)); 369 sc->sc_hasppc = EHCI_HCS_PPC(sparams); 370 371 if (EHCI_HCC_64BIT(cparams)) { 372 /* MUST clear segment register if 64 bit capable. */ 373 EWRITE4(sc, EHCI_CTRLDSSEGMENT, 0); 374 } 375 376 sc->sc_bus.usbrev = USBREV_2_0; 377 378 usb_setup_reserve(sc->sc_dev, &sc->sc_dma_reserve, sc->sc_bus.dmatag, 379 USB_MEM_RESERVE); 380 381 /* Reset the controller */ 382 DPRINTF(("%s: resetting\n", device_xname(sc->sc_dev))); 383 EOWRITE4(sc, EHCI_USBCMD, 0); /* Halt controller */ 384 usb_delay_ms(&sc->sc_bus, 1); 385 EOWRITE4(sc, EHCI_USBCMD, EHCI_CMD_HCRESET); 386 for (i = 0; i < 100; i++) { 387 usb_delay_ms(&sc->sc_bus, 1); 388 hcr = EOREAD4(sc, EHCI_USBCMD) & EHCI_CMD_HCRESET; 389 if (!hcr) 390 break; 391 } 392 if (hcr) { 393 aprint_error("%s: reset timeout\n", device_xname(sc->sc_dev)); 394 return (USBD_IOERROR); 395 } 396 if (sc->sc_vendor_init) 397 sc->sc_vendor_init(sc); 398 399 /* 400 * If we are doing embedded transaction translation function, force 401 * the controller to host mode. 402 */ 403 if (sc->sc_flags & EHCIF_ETTF) { 404 uint32_t usbmode = EREAD4(sc, EHCI_USBMODE); 405 usbmode &= ~EHCI_USBMODE_CM; 406 usbmode |= EHCI_USBMODE_CM_HOST; 407 EWRITE4(sc, EHCI_USBMODE, usbmode); 408 } 409 410 /* XXX need proper intr scheduling */ 411 sc->sc_rand = 96; 412 413 /* frame list size at default, read back what we got and use that */ 414 switch (EHCI_CMD_FLS(EOREAD4(sc, EHCI_USBCMD))) { 415 case 0: sc->sc_flsize = 1024; break; 416 case 1: sc->sc_flsize = 512; break; 417 case 2: sc->sc_flsize = 256; break; 418 case 3: return (USBD_IOERROR); 419 } 420 err = usb_allocmem(&sc->sc_bus, sc->sc_flsize * sizeof(ehci_link_t), 421 EHCI_FLALIGN_ALIGN, &sc->sc_fldma); 422 if (err) 423 return (err); 424 DPRINTF(("%s: flsize=%d\n", device_xname(sc->sc_dev),sc->sc_flsize)); 425 sc->sc_flist = KERNADDR(&sc->sc_fldma, 0); 426 427 for (i = 0; i < sc->sc_flsize; i++) { 428 sc->sc_flist[i] = EHCI_NULL; 429 } 430 431 EOWRITE4(sc, EHCI_PERIODICLISTBASE, DMAADDR(&sc->sc_fldma, 0)); 432 433 sc->sc_softitds = malloc(sc->sc_flsize * sizeof(ehci_soft_itd_t *), 434 M_USB, M_NOWAIT | M_ZERO); 435 if (sc->sc_softitds == NULL) 436 return ENOMEM; 437 LIST_INIT(&sc->sc_freeitds); 438 TAILQ_INIT(&sc->sc_intrhead); 439 mutex_init(&sc->sc_intrhead_lock, MUTEX_DEFAULT, IPL_USB); 440 441 /* Set up the bus struct. */ 442 sc->sc_bus.methods = &ehci_bus_methods; 443 sc->sc_bus.pipe_size = sizeof(struct ehci_pipe); 444 445 sc->sc_eintrs = EHCI_NORMAL_INTRS; 446 447 /* 448 * Allocate the interrupt dummy QHs. These are arranged to give poll 449 * intervals that are powers of 2 times 1ms. 450 */ 451 for (i = 0; i < EHCI_INTRQHS; i++) { 452 sqh = ehci_alloc_sqh(sc); 453 if (sqh == NULL) { 454 err = USBD_NOMEM; 455 goto bad1; 456 } 457 sc->sc_islots[i].sqh = sqh; 458 } 459 for (i = 0; i < EHCI_INTRQHS; i++) { 460 sqh = sc->sc_islots[i].sqh; 461 if (i == 0) { 462 /* The last (1ms) QH terminates. */ 463 sqh->qh.qh_link = EHCI_NULL; 464 sqh->next = NULL; 465 } else { 466 /* Otherwise the next QH has half the poll interval */ 467 sqh->next = sc->sc_islots[(i + 1) / 2 - 1].sqh; 468 sqh->qh.qh_link = htole32(sqh->next->physaddr | 469 EHCI_LINK_QH); 470 } 471 sqh->qh.qh_endp = htole32(EHCI_QH_SET_EPS(EHCI_QH_SPEED_HIGH)); 472 sqh->qh.qh_curqtd = EHCI_NULL; 473 sqh->next = NULL; 474 sqh->qh.qh_qtd.qtd_next = EHCI_NULL; 475 sqh->qh.qh_qtd.qtd_altnext = EHCI_NULL; 476 sqh->qh.qh_qtd.qtd_status = htole32(EHCI_QTD_HALTED); 477 sqh->sqtd = NULL; 478 usb_syncmem(&sqh->dma, sqh->offs, sizeof(sqh->qh), 479 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 480 } 481 /* Point the frame list at the last level (128ms). */ 482 for (i = 0; i < sc->sc_flsize; i++) { 483 int j; 484 485 j = (i & ~(EHCI_MAX_POLLRATE-1)) | 486 revbits[i & (EHCI_MAX_POLLRATE-1)]; 487 sc->sc_flist[j] = htole32(EHCI_LINK_QH | 488 sc->sc_islots[EHCI_IQHIDX(EHCI_IPOLLRATES - 1, 489 i)].sqh->physaddr); 490 } 491 usb_syncmem(&sc->sc_fldma, 0, sc->sc_flsize * sizeof(ehci_link_t), 492 BUS_DMASYNC_PREWRITE); 493 494 /* Allocate dummy QH that starts the async list. */ 495 sqh = ehci_alloc_sqh(sc); 496 if (sqh == NULL) { 497 err = USBD_NOMEM; 498 goto bad1; 499 } 500 /* Fill the QH */ 501 sqh->qh.qh_endp = 502 htole32(EHCI_QH_SET_EPS(EHCI_QH_SPEED_HIGH) | EHCI_QH_HRECL); 503 sqh->qh.qh_link = 504 htole32(sqh->physaddr | EHCI_LINK_QH); 505 sqh->qh.qh_curqtd = EHCI_NULL; 506 sqh->next = NULL; 507 /* Fill the overlay qTD */ 508 sqh->qh.qh_qtd.qtd_next = EHCI_NULL; 509 sqh->qh.qh_qtd.qtd_altnext = EHCI_NULL; 510 sqh->qh.qh_qtd.qtd_status = htole32(EHCI_QTD_HALTED); 511 sqh->sqtd = NULL; 512 usb_syncmem(&sqh->dma, sqh->offs, sizeof(sqh->qh), 513 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 514 #ifdef EHCI_DEBUG 515 if (ehcidebug) { 516 ehci_dump_sqh(sqh); 517 } 518 #endif 519 520 /* Point to async list */ 521 sc->sc_async_head = sqh; 522 EOWRITE4(sc, EHCI_ASYNCLISTADDR, sqh->physaddr | EHCI_LINK_QH); 523 524 callout_init(&(sc->sc_tmo_intrlist), 0); 525 526 mutex_init(&sc->sc_doorbell_lock, MUTEX_DEFAULT, IPL_NONE); 527 528 /* Turn on controller */ 529 EOWRITE4(sc, EHCI_USBCMD, 530 EHCI_CMD_ITC_2 | /* 2 microframes interrupt delay */ 531 (EOREAD4(sc, EHCI_USBCMD) & EHCI_CMD_FLS_M) | 532 EHCI_CMD_ASE | 533 EHCI_CMD_PSE | 534 EHCI_CMD_RS); 535 536 /* Take over port ownership */ 537 EOWRITE4(sc, EHCI_CONFIGFLAG, EHCI_CONF_CF); 538 539 for (i = 0; i < 100; i++) { 540 usb_delay_ms(&sc->sc_bus, 1); 541 hcr = EOREAD4(sc, EHCI_USBSTS) & EHCI_STS_HCH; 542 if (!hcr) 543 break; 544 } 545 if (hcr) { 546 aprint_error("%s: run timeout\n", device_xname(sc->sc_dev)); 547 return (USBD_IOERROR); 548 } 549 550 /* Enable interrupts */ 551 DPRINTFN(1,("ehci_init: enabling\n")); 552 EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs); 553 554 return (USBD_NORMAL_COMPLETION); 555 556 #if 0 557 bad2: 558 ehci_free_sqh(sc, sc->sc_async_head); 559 #endif 560 bad1: 561 usb_freemem(&sc->sc_bus, &sc->sc_fldma); 562 return (err); 563 } 564 565 int 566 ehci_intr(void *v) 567 { 568 ehci_softc_t *sc = v; 569 570 if (sc == NULL || sc->sc_dying || !device_has_power(sc->sc_dev)) 571 return (0); 572 573 /* If we get an interrupt while polling, then just ignore it. */ 574 if (sc->sc_bus.use_polling) { 575 u_int32_t intrs = EHCI_STS_INTRS(EOREAD4(sc, EHCI_USBSTS)); 576 577 if (intrs) 578 EOWRITE4(sc, EHCI_USBSTS, intrs); /* Acknowledge */ 579 #ifdef DIAGNOSTIC 580 DPRINTFN(16, ("ehci_intr: ignored interrupt while polling\n")); 581 #endif 582 return (0); 583 } 584 585 return (ehci_intr1(sc)); 586 } 587 588 Static int 589 ehci_intr1(ehci_softc_t *sc) 590 { 591 u_int32_t intrs, eintrs; 592 593 DPRINTFN(20,("ehci_intr1: enter\n")); 594 595 /* In case the interrupt occurs before initialization has completed. */ 596 if (sc == NULL) { 597 #ifdef DIAGNOSTIC 598 printf("ehci_intr1: sc == NULL\n"); 599 #endif 600 return (0); 601 } 602 603 intrs = EHCI_STS_INTRS(EOREAD4(sc, EHCI_USBSTS)); 604 if (!intrs) 605 return (0); 606 607 eintrs = intrs & sc->sc_eintrs; 608 DPRINTFN(7, ("ehci_intr1: sc=%p intrs=0x%x(0x%x) eintrs=0x%x\n", 609 sc, (u_int)intrs, EOREAD4(sc, EHCI_USBSTS), 610 (u_int)eintrs)); 611 if (!eintrs) 612 return (0); 613 614 EOWRITE4(sc, EHCI_USBSTS, intrs); /* Acknowledge */ 615 sc->sc_bus.intr_context++; 616 sc->sc_bus.no_intrs++; 617 if (eintrs & EHCI_STS_IAA) { 618 DPRINTF(("ehci_intr1: door bell\n")); 619 wakeup(&sc->sc_async_head); 620 eintrs &= ~EHCI_STS_IAA; 621 } 622 if (eintrs & (EHCI_STS_INT | EHCI_STS_ERRINT)) { 623 DPRINTFN(5,("ehci_intr1: %s %s\n", 624 eintrs & EHCI_STS_INT ? "INT" : "", 625 eintrs & EHCI_STS_ERRINT ? "ERRINT" : "")); 626 usb_schedsoftintr(&sc->sc_bus); 627 eintrs &= ~(EHCI_STS_INT | EHCI_STS_ERRINT); 628 } 629 if (eintrs & EHCI_STS_HSE) { 630 printf("%s: unrecoverable error, controller halted\n", 631 device_xname(sc->sc_dev)); 632 /* XXX what else */ 633 } 634 if (eintrs & EHCI_STS_PCD) { 635 ehci_pcd(sc, sc->sc_intrxfer); 636 eintrs &= ~EHCI_STS_PCD; 637 } 638 639 sc->sc_bus.intr_context--; 640 641 if (eintrs != 0) { 642 /* Block unprocessed interrupts. */ 643 sc->sc_eintrs &= ~eintrs; 644 EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs); 645 printf("%s: blocking intrs 0x%x\n", 646 device_xname(sc->sc_dev), eintrs); 647 } 648 649 return (1); 650 } 651 652 653 Static void 654 ehci_pcd(ehci_softc_t *sc, usbd_xfer_handle xfer) 655 { 656 usbd_pipe_handle pipe; 657 u_char *p; 658 int i, m; 659 660 if (xfer == NULL) { 661 /* Just ignore the change. */ 662 return; 663 } 664 665 pipe = xfer->pipe; 666 667 p = KERNADDR(&xfer->dmabuf, 0); 668 m = min(sc->sc_noport, xfer->length * 8 - 1); 669 memset(p, 0, xfer->length); 670 for (i = 1; i <= m; i++) { 671 /* Pick out CHANGE bits from the status reg. */ 672 if (EOREAD4(sc, EHCI_PORTSC(i)) & EHCI_PS_CLEAR) 673 p[i/8] |= 1 << (i%8); 674 } 675 DPRINTF(("ehci_pcd: change=0x%02x\n", *p)); 676 xfer->actlen = xfer->length; 677 xfer->status = USBD_NORMAL_COMPLETION; 678 679 usb_transfer_complete(xfer); 680 } 681 682 Static void 683 ehci_softintr(void *v) 684 { 685 struct usbd_bus *bus = v; 686 ehci_softc_t *sc = bus->hci_private; 687 struct ehci_xfer *ex, *nextex; 688 689 DPRINTFN(10,("%s: ehci_softintr (%d)\n", device_xname(sc->sc_dev), 690 sc->sc_bus.intr_context)); 691 692 sc->sc_bus.intr_context++; 693 694 /* 695 * The only explanation I can think of for why EHCI is as brain dead 696 * as UHCI interrupt-wise is that Intel was involved in both. 697 * An interrupt just tells us that something is done, we have no 698 * clue what, so we need to scan through all active transfers. :-( 699 */ 700 for (ex = TAILQ_FIRST(&sc->sc_intrhead); ex; ex = nextex) { 701 nextex = TAILQ_NEXT(ex, inext); 702 ehci_check_intr(sc, ex); 703 } 704 705 /* Schedule a callout to catch any dropped transactions. */ 706 if ((sc->sc_flags & EHCIF_DROPPED_INTR_WORKAROUND) && 707 !TAILQ_EMPTY(&sc->sc_intrhead)) 708 callout_reset(&(sc->sc_tmo_intrlist), 709 (hz), (ehci_intrlist_timeout), (sc)); 710 711 #ifdef USB_USE_SOFTINTR 712 if (sc->sc_softwake) { 713 sc->sc_softwake = 0; 714 wakeup(&sc->sc_softwake); 715 } 716 #endif /* USB_USE_SOFTINTR */ 717 718 sc->sc_bus.intr_context--; 719 } 720 721 /* Check for an interrupt. */ 722 Static void 723 ehci_check_intr(ehci_softc_t *sc, struct ehci_xfer *ex) 724 { 725 int attr; 726 727 DPRINTFN(/*15*/2, ("ehci_check_intr: ex=%p\n", ex)); 728 729 attr = ex->xfer.pipe->endpoint->edesc->bmAttributes; 730 if (UE_GET_XFERTYPE(attr) == UE_ISOCHRONOUS) 731 ehci_check_itd_intr(sc, ex); 732 else 733 ehci_check_qh_intr(sc, ex); 734 735 return; 736 } 737 738 Static void 739 ehci_check_qh_intr(ehci_softc_t *sc, struct ehci_xfer *ex) 740 { 741 ehci_soft_qtd_t *sqtd, *lsqtd; 742 __uint32_t status; 743 744 if (ex->sqtdstart == NULL) { 745 printf("ehci_check_qh_intr: not valid sqtd\n"); 746 return; 747 } 748 749 lsqtd = ex->sqtdend; 750 #ifdef DIAGNOSTIC 751 if (lsqtd == NULL) { 752 printf("ehci_check_qh_intr: lsqtd==0\n"); 753 return; 754 } 755 #endif 756 /* 757 * If the last TD is still active we need to check whether there 758 * is a an error somewhere in the middle, or whether there was a 759 * short packet (SPD and not ACTIVE). 760 */ 761 usb_syncmem(&lsqtd->dma, 762 lsqtd->offs + offsetof(ehci_qtd_t, qtd_status), 763 sizeof(lsqtd->qtd.qtd_status), 764 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 765 if (le32toh(lsqtd->qtd.qtd_status) & EHCI_QTD_ACTIVE) { 766 DPRINTFN(12, ("ehci_check_intr: active ex=%p\n", ex)); 767 for (sqtd = ex->sqtdstart; sqtd != lsqtd; sqtd=sqtd->nextqtd) { 768 usb_syncmem(&sqtd->dma, 769 sqtd->offs + offsetof(ehci_qtd_t, qtd_status), 770 sizeof(sqtd->qtd.qtd_status), 771 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 772 status = le32toh(sqtd->qtd.qtd_status); 773 usb_syncmem(&sqtd->dma, 774 sqtd->offs + offsetof(ehci_qtd_t, qtd_status), 775 sizeof(sqtd->qtd.qtd_status), BUS_DMASYNC_PREREAD); 776 /* If there's an active QTD the xfer isn't done. */ 777 if (status & EHCI_QTD_ACTIVE) 778 break; 779 /* Any kind of error makes the xfer done. */ 780 if (status & EHCI_QTD_HALTED) 781 goto done; 782 /* We want short packets, and it is short: it's done */ 783 if (EHCI_QTD_GET_BYTES(status) != 0) 784 goto done; 785 } 786 DPRINTFN(12, ("ehci_check_intr: ex=%p std=%p still active\n", 787 ex, ex->sqtdstart)); 788 usb_syncmem(&lsqtd->dma, 789 lsqtd->offs + offsetof(ehci_qtd_t, qtd_status), 790 sizeof(lsqtd->qtd.qtd_status), BUS_DMASYNC_PREREAD); 791 return; 792 } 793 done: 794 DPRINTFN(12, ("ehci_check_intr: ex=%p done\n", ex)); 795 callout_stop(&ex->xfer.timeout_handle); 796 ehci_idone(ex); 797 } 798 799 Static void 800 ehci_check_itd_intr(ehci_softc_t *sc, struct ehci_xfer *ex) { 801 ehci_soft_itd_t *itd; 802 int i; 803 804 if (&ex->xfer != SIMPLEQ_FIRST(&ex->xfer.pipe->queue)) 805 return; 806 807 if (ex->itdstart == NULL) { 808 printf("ehci_check_itd_intr: not valid itd\n"); 809 return; 810 } 811 812 itd = ex->itdend; 813 #ifdef DIAGNOSTIC 814 if (itd == NULL) { 815 printf("ehci_check_itd_intr: itdend == 0\n"); 816 return; 817 } 818 #endif 819 820 /* 821 * check no active transfers in last itd, meaning we're finished 822 */ 823 824 usb_syncmem(&itd->dma, itd->offs + offsetof(ehci_itd_t, itd_ctl), 825 sizeof(itd->itd.itd_ctl), BUS_DMASYNC_POSTWRITE | 826 BUS_DMASYNC_POSTREAD); 827 828 for (i = 0; i < EHCI_ITD_NUFRAMES; i++) { 829 if (le32toh(itd->itd.itd_ctl[i]) & EHCI_ITD_ACTIVE) 830 break; 831 } 832 833 if (i == EHCI_ITD_NUFRAMES) { 834 goto done; /* All 8 descriptors inactive, it's done */ 835 } 836 837 DPRINTFN(12, ("ehci_check_itd_intr: ex %p itd %p still active\n", ex, 838 ex->itdstart)); 839 return; 840 done: 841 DPRINTFN(12, ("ehci_check_itd_intr: ex=%p done\n", ex)); 842 callout_stop(&ex->xfer.timeout_handle); 843 ehci_idone(ex); 844 } 845 846 Static void 847 ehci_idone(struct ehci_xfer *ex) 848 { 849 usbd_xfer_handle xfer = &ex->xfer; 850 struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe; 851 ehci_soft_qtd_t *sqtd, *lsqtd; 852 u_int32_t status = 0, nstatus = 0; 853 int actlen; 854 855 DPRINTFN(/*12*/2, ("ehci_idone: ex=%p\n", ex)); 856 #ifdef DIAGNOSTIC 857 { 858 int s = splhigh(); 859 if (ex->isdone) { 860 splx(s); 861 #ifdef EHCI_DEBUG 862 printf("ehci_idone: ex is done!\n "); 863 ehci_dump_exfer(ex); 864 #else 865 printf("ehci_idone: ex=%p is done!\n", ex); 866 #endif 867 return; 868 } 869 ex->isdone = 1; 870 splx(s); 871 } 872 #endif 873 if (xfer->status == USBD_CANCELLED || 874 xfer->status == USBD_TIMEOUT) { 875 DPRINTF(("ehci_idone: aborted xfer=%p\n", xfer)); 876 return; 877 } 878 879 #ifdef EHCI_DEBUG 880 DPRINTFN(/*10*/2, ("ehci_idone: xfer=%p, pipe=%p ready\n", xfer, epipe)); 881 if (ehcidebug > 10) 882 ehci_dump_sqtds(ex->sqtdstart); 883 #endif 884 885 /* The transfer is done, compute actual length and status. */ 886 887 if (UE_GET_XFERTYPE(xfer->pipe->endpoint->edesc->bmAttributes) 888 == UE_ISOCHRONOUS) { 889 /* Isoc transfer */ 890 struct ehci_soft_itd *itd; 891 int i, nframes, len, uframes; 892 893 nframes = 0; 894 actlen = 0; 895 896 i = xfer->pipe->endpoint->edesc->bInterval; 897 uframes = min(1 << (i - 1), USB_UFRAMES_PER_FRAME); 898 899 for (itd = ex->itdstart; itd != NULL; itd = itd->xfer_next) { 900 usb_syncmem(&itd->dma,itd->offs + offsetof(ehci_itd_t,itd_ctl), 901 sizeof(itd->itd.itd_ctl), BUS_DMASYNC_POSTWRITE | 902 BUS_DMASYNC_POSTREAD); 903 904 for (i = 0; i < EHCI_ITD_NUFRAMES; i += uframes) { 905 /* XXX - driver didn't fill in the frame full 906 * of uframes. This leads to scheduling 907 * inefficiencies, but working around 908 * this doubles complexity of tracking 909 * an xfer. 910 */ 911 if (nframes >= xfer->nframes) 912 break; 913 914 status = le32toh(itd->itd.itd_ctl[i]); 915 len = EHCI_ITD_GET_LEN(status); 916 if (EHCI_ITD_GET_STATUS(status) != 0) 917 len = 0; /*No valid data on error*/ 918 919 xfer->frlengths[nframes++] = len; 920 actlen += len; 921 } 922 923 if (nframes >= xfer->nframes) 924 break; 925 } 926 927 xfer->actlen = actlen; 928 xfer->status = USBD_NORMAL_COMPLETION; 929 goto end; 930 } 931 932 /* Continue processing xfers using queue heads */ 933 934 lsqtd = ex->sqtdend; 935 actlen = 0; 936 for (sqtd = ex->sqtdstart; sqtd != lsqtd->nextqtd; sqtd = sqtd->nextqtd) { 937 usb_syncmem(&sqtd->dma, sqtd->offs, sizeof(sqtd->qtd), 938 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 939 nstatus = le32toh(sqtd->qtd.qtd_status); 940 if (nstatus & EHCI_QTD_ACTIVE) 941 break; 942 943 status = nstatus; 944 if (EHCI_QTD_GET_PID(status) != EHCI_QTD_PID_SETUP) 945 actlen += sqtd->len - EHCI_QTD_GET_BYTES(status); 946 } 947 948 949 /* 950 * If there are left over TDs we need to update the toggle. 951 * The default pipe doesn't need it since control transfers 952 * start the toggle at 0 every time. 953 * For a short transfer we need to update the toggle for the missing 954 * packets within the qTD. 955 */ 956 if ((sqtd != lsqtd->nextqtd || EHCI_QTD_GET_BYTES(status)) && 957 xfer->pipe->device->default_pipe != xfer->pipe) { 958 DPRINTFN(2, ("ehci_idone: need toggle update " 959 "status=%08x nstatus=%08x\n", status, nstatus)); 960 #if 0 961 ehci_dump_sqh(epipe->sqh); 962 ehci_dump_sqtds(ex->sqtdstart); 963 #endif 964 epipe->nexttoggle = EHCI_QTD_GET_TOGGLE(nstatus); 965 } 966 967 DPRINTFN(/*10*/2, ("ehci_idone: len=%d, actlen=%d, status=0x%x\n", 968 xfer->length, actlen, status)); 969 xfer->actlen = actlen; 970 if (status & EHCI_QTD_HALTED) { 971 #ifdef EHCI_DEBUG 972 char sbuf[128]; 973 974 snprintb(sbuf, sizeof(sbuf), 975 "\20\7HALTED\6BUFERR\5BABBLE\4XACTERR\3MISSED\1PINGSTATE", 976 (u_int32_t)status); 977 978 DPRINTFN(2, ("ehci_idone: error, addr=%d, endpt=0x%02x, " 979 "status 0x%s\n", 980 xfer->pipe->device->address, 981 xfer->pipe->endpoint->edesc->bEndpointAddress, 982 sbuf)); 983 if (ehcidebug > 2) { 984 ehci_dump_sqh(epipe->sqh); 985 ehci_dump_sqtds(ex->sqtdstart); 986 } 987 #endif 988 /* low&full speed has an extra error flag */ 989 if (EHCI_QH_GET_EPS(epipe->sqh->qh.qh_endp) != 990 EHCI_QH_SPEED_HIGH) 991 status &= EHCI_QTD_STATERRS | EHCI_QTD_PINGSTATE; 992 else 993 status &= EHCI_QTD_STATERRS; 994 if (status == 0) /* no other errors means a stall */ { 995 xfer->status = USBD_STALLED; 996 } else { 997 xfer->status = USBD_IOERROR; /* more info XXX */ 998 } 999 /* XXX need to reset TT on missed microframe */ 1000 if (status & EHCI_QTD_MISSEDMICRO) { 1001 ehci_softc_t *sc = 1002 xfer->pipe->device->bus->hci_private; 1003 1004 printf("%s: missed microframe, TT reset not " 1005 "implemented, hub might be inoperational\n", 1006 device_xname(sc->sc_dev)); 1007 } 1008 } else { 1009 xfer->status = USBD_NORMAL_COMPLETION; 1010 } 1011 1012 end: 1013 /* XXX transfer_complete memcpys out transfer data (for in endpoints) 1014 * during this call, before methods->done is called: dma sync required 1015 * beforehand? */ 1016 usb_transfer_complete(xfer); 1017 DPRINTFN(/*12*/2, ("ehci_idone: ex=%p done\n", ex)); 1018 } 1019 1020 /* 1021 * Wait here until controller claims to have an interrupt. 1022 * Then call ehci_intr and return. Use timeout to avoid waiting 1023 * too long. 1024 */ 1025 Static void 1026 ehci_waitintr(ehci_softc_t *sc, usbd_xfer_handle xfer) 1027 { 1028 int timo; 1029 u_int32_t intrs; 1030 1031 xfer->status = USBD_IN_PROGRESS; 1032 for (timo = xfer->timeout; timo >= 0; timo--) { 1033 usb_delay_ms(&sc->sc_bus, 1); 1034 if (sc->sc_dying) 1035 break; 1036 intrs = EHCI_STS_INTRS(EOREAD4(sc, EHCI_USBSTS)) & 1037 sc->sc_eintrs; 1038 DPRINTFN(15,("ehci_waitintr: 0x%04x\n", intrs)); 1039 #ifdef EHCI_DEBUG 1040 if (ehcidebug > 15) 1041 ehci_dump_regs(sc); 1042 #endif 1043 if (intrs) { 1044 ehci_intr1(sc); 1045 if (xfer->status != USBD_IN_PROGRESS) 1046 return; 1047 } 1048 } 1049 1050 /* Timeout */ 1051 DPRINTF(("ehci_waitintr: timeout\n")); 1052 xfer->status = USBD_TIMEOUT; 1053 usb_transfer_complete(xfer); 1054 /* XXX should free TD */ 1055 } 1056 1057 Static void 1058 ehci_poll(struct usbd_bus *bus) 1059 { 1060 ehci_softc_t *sc = bus->hci_private; 1061 #ifdef EHCI_DEBUG 1062 static int last; 1063 int new; 1064 new = EHCI_STS_INTRS(EOREAD4(sc, EHCI_USBSTS)); 1065 if (new != last) { 1066 DPRINTFN(10,("ehci_poll: intrs=0x%04x\n", new)); 1067 last = new; 1068 } 1069 #endif 1070 1071 if (EOREAD4(sc, EHCI_USBSTS) & sc->sc_eintrs) 1072 ehci_intr1(sc); 1073 } 1074 1075 void 1076 ehci_childdet(device_t self, device_t child) 1077 { 1078 struct ehci_softc *sc = device_private(self); 1079 1080 KASSERT(sc->sc_child == child); 1081 sc->sc_child = NULL; 1082 } 1083 1084 int 1085 ehci_detach(struct ehci_softc *sc, int flags) 1086 { 1087 int rv = 0; 1088 1089 if (sc->sc_child != NULL) 1090 rv = config_detach(sc->sc_child, flags); 1091 1092 if (rv != 0) 1093 return (rv); 1094 1095 callout_stop(&sc->sc_tmo_intrlist); 1096 1097 usb_delay_ms(&sc->sc_bus, 300); /* XXX let stray task complete */ 1098 1099 /* XXX free other data structures XXX */ 1100 mutex_destroy(&sc->sc_doorbell_lock); 1101 mutex_destroy(&sc->sc_intrhead_lock); 1102 1103 EOWRITE4(sc, EHCI_CONFIGFLAG, 0); 1104 1105 return (rv); 1106 } 1107 1108 1109 int 1110 ehci_activate(device_t self, enum devact act) 1111 { 1112 struct ehci_softc *sc = device_private(self); 1113 1114 switch (act) { 1115 case DVACT_DEACTIVATE: 1116 sc->sc_dying = 1; 1117 return 0; 1118 default: 1119 return EOPNOTSUPP; 1120 } 1121 } 1122 1123 /* 1124 * Handle suspend/resume. 1125 * 1126 * We need to switch to polling mode here, because this routine is 1127 * called from an interrupt context. This is all right since we 1128 * are almost suspended anyway. 1129 * 1130 * Note that this power handler isn't to be registered directly; the 1131 * bus glue needs to call out to it. 1132 */ 1133 bool 1134 ehci_suspend(device_t dv, const pmf_qual_t *qual) 1135 { 1136 ehci_softc_t *sc = device_private(dv); 1137 int i, s; 1138 uint32_t cmd, hcr; 1139 1140 s = splhardusb(); 1141 1142 sc->sc_bus.use_polling++; 1143 1144 for (i = 1; i <= sc->sc_noport; i++) { 1145 cmd = EOREAD4(sc, EHCI_PORTSC(i)) & ~EHCI_PS_CLEAR; 1146 if ((cmd & EHCI_PS_PO) == 0 && (cmd & EHCI_PS_PE) == EHCI_PS_PE) 1147 EOWRITE4(sc, EHCI_PORTSC(i), cmd | EHCI_PS_SUSP); 1148 } 1149 1150 sc->sc_cmd = EOREAD4(sc, EHCI_USBCMD); 1151 1152 cmd = sc->sc_cmd & ~(EHCI_CMD_ASE | EHCI_CMD_PSE); 1153 EOWRITE4(sc, EHCI_USBCMD, cmd); 1154 1155 for (i = 0; i < 100; i++) { 1156 hcr = EOREAD4(sc, EHCI_USBSTS) & (EHCI_STS_ASS | EHCI_STS_PSS); 1157 if (hcr == 0) 1158 break; 1159 1160 usb_delay_ms(&sc->sc_bus, 1); 1161 } 1162 if (hcr != 0) 1163 printf("%s: reset timeout\n", device_xname(dv)); 1164 1165 cmd &= ~EHCI_CMD_RS; 1166 EOWRITE4(sc, EHCI_USBCMD, cmd); 1167 1168 for (i = 0; i < 100; i++) { 1169 hcr = EOREAD4(sc, EHCI_USBSTS) & EHCI_STS_HCH; 1170 if (hcr == EHCI_STS_HCH) 1171 break; 1172 1173 usb_delay_ms(&sc->sc_bus, 1); 1174 } 1175 if (hcr != EHCI_STS_HCH) 1176 printf("%s: config timeout\n", device_xname(dv)); 1177 1178 sc->sc_bus.use_polling--; 1179 splx(s); 1180 1181 return true; 1182 } 1183 1184 bool 1185 ehci_resume(device_t dv, const pmf_qual_t *qual) 1186 { 1187 ehci_softc_t *sc = device_private(dv); 1188 int i; 1189 uint32_t cmd, hcr; 1190 1191 /* restore things in case the bios sucks */ 1192 EOWRITE4(sc, EHCI_CTRLDSSEGMENT, 0); 1193 EOWRITE4(sc, EHCI_PERIODICLISTBASE, DMAADDR(&sc->sc_fldma, 0)); 1194 EOWRITE4(sc, EHCI_ASYNCLISTADDR, 1195 sc->sc_async_head->physaddr | EHCI_LINK_QH); 1196 1197 EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs & ~EHCI_INTR_PCIE); 1198 1199 EOWRITE4(sc, EHCI_USBCMD, sc->sc_cmd); 1200 1201 hcr = 0; 1202 for (i = 1; i <= sc->sc_noport; i++) { 1203 cmd = EOREAD4(sc, EHCI_PORTSC(i)) & ~EHCI_PS_CLEAR; 1204 if ((cmd & EHCI_PS_PO) == 0 && 1205 (cmd & EHCI_PS_SUSP) == EHCI_PS_SUSP) { 1206 EOWRITE4(sc, EHCI_PORTSC(i), cmd | EHCI_PS_FPR); 1207 hcr = 1; 1208 } 1209 } 1210 1211 if (hcr) { 1212 usb_delay_ms(&sc->sc_bus, USB_RESUME_WAIT); 1213 1214 for (i = 1; i <= sc->sc_noport; i++) { 1215 cmd = EOREAD4(sc, EHCI_PORTSC(i)) & ~EHCI_PS_CLEAR; 1216 if ((cmd & EHCI_PS_PO) == 0 && 1217 (cmd & EHCI_PS_SUSP) == EHCI_PS_SUSP) 1218 EOWRITE4(sc, EHCI_PORTSC(i), 1219 cmd & ~EHCI_PS_FPR); 1220 } 1221 } 1222 1223 EOWRITE4(sc, EHCI_USBCMD, sc->sc_cmd); 1224 EOWRITE4(sc, EHCI_USBINTR, sc->sc_eintrs); 1225 1226 for (i = 0; i < 100; i++) { 1227 hcr = EOREAD4(sc, EHCI_USBSTS) & EHCI_STS_HCH; 1228 if (hcr != EHCI_STS_HCH) 1229 break; 1230 1231 usb_delay_ms(&sc->sc_bus, 1); 1232 } 1233 if (hcr == EHCI_STS_HCH) 1234 printf("%s: config timeout\n", device_xname(dv)); 1235 1236 return true; 1237 } 1238 1239 /* 1240 * Shut down the controller when the system is going down. 1241 */ 1242 bool 1243 ehci_shutdown(device_t self, int flags) 1244 { 1245 ehci_softc_t *sc = device_private(self); 1246 1247 DPRINTF(("ehci_shutdown: stopping the HC\n")); 1248 EOWRITE4(sc, EHCI_USBCMD, 0); /* Halt controller */ 1249 EOWRITE4(sc, EHCI_USBCMD, EHCI_CMD_HCRESET); 1250 return true; 1251 } 1252 1253 Static usbd_status 1254 ehci_allocm(struct usbd_bus *bus, usb_dma_t *dma, u_int32_t size) 1255 { 1256 struct ehci_softc *sc = bus->hci_private; 1257 usbd_status err; 1258 1259 err = usb_allocmem(&sc->sc_bus, size, 0, dma); 1260 if (err == USBD_NOMEM) 1261 err = usb_reserve_allocm(&sc->sc_dma_reserve, dma, size); 1262 #ifdef EHCI_DEBUG 1263 if (err) 1264 printf("ehci_allocm: usb_allocmem()=%d\n", err); 1265 #endif 1266 return (err); 1267 } 1268 1269 Static void 1270 ehci_freem(struct usbd_bus *bus, usb_dma_t *dma) 1271 { 1272 struct ehci_softc *sc = bus->hci_private; 1273 1274 if (dma->block->flags & USB_DMA_RESERVE) { 1275 usb_reserve_freem(&sc->sc_dma_reserve, 1276 dma); 1277 return; 1278 } 1279 usb_freemem(&sc->sc_bus, dma); 1280 } 1281 1282 Static usbd_xfer_handle 1283 ehci_allocx(struct usbd_bus *bus) 1284 { 1285 struct ehci_softc *sc = bus->hci_private; 1286 usbd_xfer_handle xfer; 1287 1288 xfer = SIMPLEQ_FIRST(&sc->sc_free_xfers); 1289 if (xfer != NULL) { 1290 SIMPLEQ_REMOVE_HEAD(&sc->sc_free_xfers, next); 1291 #ifdef DIAGNOSTIC 1292 if (xfer->busy_free != XFER_FREE) { 1293 printf("ehci_allocx: xfer=%p not free, 0x%08x\n", xfer, 1294 xfer->busy_free); 1295 } 1296 #endif 1297 } else { 1298 xfer = malloc(sizeof(struct ehci_xfer), M_USB, M_NOWAIT); 1299 } 1300 if (xfer != NULL) { 1301 memset(xfer, 0, sizeof(struct ehci_xfer)); 1302 #ifdef DIAGNOSTIC 1303 EXFER(xfer)->isdone = 1; 1304 xfer->busy_free = XFER_BUSY; 1305 #endif 1306 } 1307 return (xfer); 1308 } 1309 1310 Static void 1311 ehci_freex(struct usbd_bus *bus, usbd_xfer_handle xfer) 1312 { 1313 struct ehci_softc *sc = bus->hci_private; 1314 1315 #ifdef DIAGNOSTIC 1316 if (xfer->busy_free != XFER_BUSY) { 1317 printf("ehci_freex: xfer=%p not busy, 0x%08x\n", xfer, 1318 xfer->busy_free); 1319 } 1320 xfer->busy_free = XFER_FREE; 1321 if (!EXFER(xfer)->isdone) { 1322 printf("ehci_freex: !isdone\n"); 1323 } 1324 #endif 1325 SIMPLEQ_INSERT_HEAD(&sc->sc_free_xfers, xfer, next); 1326 } 1327 1328 Static void 1329 ehci_device_clear_toggle(usbd_pipe_handle pipe) 1330 { 1331 struct ehci_pipe *epipe = (struct ehci_pipe *)pipe; 1332 1333 DPRINTF(("ehci_device_clear_toggle: epipe=%p status=0x%x\n", 1334 epipe, epipe->sqh->qh.qh_qtd.qtd_status)); 1335 #ifdef EHCI_DEBUG 1336 if (ehcidebug) 1337 usbd_dump_pipe(pipe); 1338 #endif 1339 epipe->nexttoggle = 0; 1340 } 1341 1342 Static void 1343 ehci_noop(usbd_pipe_handle pipe) 1344 { 1345 } 1346 1347 #ifdef EHCI_DEBUG 1348 Static void 1349 ehci_dump_regs(ehci_softc_t *sc) 1350 { 1351 int i; 1352 printf("cmd=0x%08x, sts=0x%08x, ien=0x%08x\n", 1353 EOREAD4(sc, EHCI_USBCMD), 1354 EOREAD4(sc, EHCI_USBSTS), 1355 EOREAD4(sc, EHCI_USBINTR)); 1356 printf("frindex=0x%08x ctrdsegm=0x%08x periodic=0x%08x async=0x%08x\n", 1357 EOREAD4(sc, EHCI_FRINDEX), 1358 EOREAD4(sc, EHCI_CTRLDSSEGMENT), 1359 EOREAD4(sc, EHCI_PERIODICLISTBASE), 1360 EOREAD4(sc, EHCI_ASYNCLISTADDR)); 1361 for (i = 1; i <= sc->sc_noport; i++) 1362 printf("port %d status=0x%08x\n", i, 1363 EOREAD4(sc, EHCI_PORTSC(i))); 1364 } 1365 1366 /* 1367 * Unused function - this is meant to be called from a kernel 1368 * debugger. 1369 */ 1370 void 1371 ehci_dump(void) 1372 { 1373 ehci_dump_regs(theehci); 1374 } 1375 1376 Static void 1377 ehci_dump_link(ehci_link_t link, int type) 1378 { 1379 link = le32toh(link); 1380 printf("0x%08x", link); 1381 if (link & EHCI_LINK_TERMINATE) 1382 printf("<T>"); 1383 else { 1384 printf("<"); 1385 if (type) { 1386 switch (EHCI_LINK_TYPE(link)) { 1387 case EHCI_LINK_ITD: printf("ITD"); break; 1388 case EHCI_LINK_QH: printf("QH"); break; 1389 case EHCI_LINK_SITD: printf("SITD"); break; 1390 case EHCI_LINK_FSTN: printf("FSTN"); break; 1391 } 1392 } 1393 printf(">"); 1394 } 1395 } 1396 1397 Static void 1398 ehci_dump_sqtds(ehci_soft_qtd_t *sqtd) 1399 { 1400 int i; 1401 u_int32_t stop; 1402 1403 stop = 0; 1404 for (i = 0; sqtd && i < 20 && !stop; sqtd = sqtd->nextqtd, i++) { 1405 ehci_dump_sqtd(sqtd); 1406 usb_syncmem(&sqtd->dma, 1407 sqtd->offs + offsetof(ehci_qtd_t, qtd_next), 1408 sizeof(sqtd->qtd), 1409 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 1410 stop = sqtd->qtd.qtd_next & htole32(EHCI_LINK_TERMINATE); 1411 usb_syncmem(&sqtd->dma, 1412 sqtd->offs + offsetof(ehci_qtd_t, qtd_next), 1413 sizeof(sqtd->qtd), BUS_DMASYNC_PREREAD); 1414 } 1415 if (sqtd) 1416 printf("dump aborted, too many TDs\n"); 1417 } 1418 1419 Static void 1420 ehci_dump_sqtd(ehci_soft_qtd_t *sqtd) 1421 { 1422 usb_syncmem(&sqtd->dma, sqtd->offs, 1423 sizeof(sqtd->qtd), BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 1424 printf("QTD(%p) at 0x%08x:\n", sqtd, sqtd->physaddr); 1425 ehci_dump_qtd(&sqtd->qtd); 1426 usb_syncmem(&sqtd->dma, sqtd->offs, 1427 sizeof(sqtd->qtd), BUS_DMASYNC_PREREAD); 1428 } 1429 1430 Static void 1431 ehci_dump_qtd(ehci_qtd_t *qtd) 1432 { 1433 u_int32_t s; 1434 char sbuf[128]; 1435 1436 printf(" next="); ehci_dump_link(qtd->qtd_next, 0); 1437 printf(" altnext="); ehci_dump_link(qtd->qtd_altnext, 0); 1438 printf("\n"); 1439 s = le32toh(qtd->qtd_status); 1440 snprintb(sbuf, sizeof(sbuf), 1441 "\20\10ACTIVE\7HALTED\6BUFERR\5BABBLE\4XACTERR" 1442 "\3MISSED\2SPLIT\1PING", EHCI_QTD_GET_STATUS(s)); 1443 printf(" status=0x%08x: toggle=%d bytes=0x%x ioc=%d c_page=0x%x\n", 1444 s, EHCI_QTD_GET_TOGGLE(s), EHCI_QTD_GET_BYTES(s), 1445 EHCI_QTD_GET_IOC(s), EHCI_QTD_GET_C_PAGE(s)); 1446 printf(" cerr=%d pid=%d stat=0x%s\n", EHCI_QTD_GET_CERR(s), 1447 EHCI_QTD_GET_PID(s), sbuf); 1448 for (s = 0; s < 5; s++) 1449 printf(" buffer[%d]=0x%08x\n", s, le32toh(qtd->qtd_buffer[s])); 1450 } 1451 1452 Static void 1453 ehci_dump_sqh(ehci_soft_qh_t *sqh) 1454 { 1455 ehci_qh_t *qh = &sqh->qh; 1456 u_int32_t endp, endphub; 1457 1458 usb_syncmem(&sqh->dma, sqh->offs, 1459 sizeof(sqh->qh), BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 1460 printf("QH(%p) at 0x%08x:\n", sqh, sqh->physaddr); 1461 printf(" link="); ehci_dump_link(qh->qh_link, 1); printf("\n"); 1462 endp = le32toh(qh->qh_endp); 1463 printf(" endp=0x%08x\n", endp); 1464 printf(" addr=0x%02x inact=%d endpt=%d eps=%d dtc=%d hrecl=%d\n", 1465 EHCI_QH_GET_ADDR(endp), EHCI_QH_GET_INACT(endp), 1466 EHCI_QH_GET_ENDPT(endp), EHCI_QH_GET_EPS(endp), 1467 EHCI_QH_GET_DTC(endp), EHCI_QH_GET_HRECL(endp)); 1468 printf(" mpl=0x%x ctl=%d nrl=%d\n", 1469 EHCI_QH_GET_MPL(endp), EHCI_QH_GET_CTL(endp), 1470 EHCI_QH_GET_NRL(endp)); 1471 endphub = le32toh(qh->qh_endphub); 1472 printf(" endphub=0x%08x\n", endphub); 1473 printf(" smask=0x%02x cmask=0x%02x huba=0x%02x port=%d mult=%d\n", 1474 EHCI_QH_GET_SMASK(endphub), EHCI_QH_GET_CMASK(endphub), 1475 EHCI_QH_GET_HUBA(endphub), EHCI_QH_GET_PORT(endphub), 1476 EHCI_QH_GET_MULT(endphub)); 1477 printf(" curqtd="); ehci_dump_link(qh->qh_curqtd, 0); printf("\n"); 1478 printf("Overlay qTD:\n"); 1479 ehci_dump_qtd(&qh->qh_qtd); 1480 usb_syncmem(&sqh->dma, sqh->offs, 1481 sizeof(sqh->qh), BUS_DMASYNC_PREREAD); 1482 } 1483 1484 #if notyet 1485 Static void 1486 ehci_dump_itd(struct ehci_soft_itd *itd) 1487 { 1488 ehci_isoc_trans_t t; 1489 ehci_isoc_bufr_ptr_t b, b2, b3; 1490 int i; 1491 1492 printf("ITD: next phys=%X\n", itd->itd.itd_next); 1493 1494 for (i = 0; i < EHCI_ITD_NUFRAMES; i++) { 1495 t = le32toh(itd->itd.itd_ctl[i]); 1496 printf("ITDctl %d: stat=%X len=%X ioc=%X pg=%X offs=%X\n", i, 1497 EHCI_ITD_GET_STATUS(t), EHCI_ITD_GET_LEN(t), 1498 EHCI_ITD_GET_IOC(t), EHCI_ITD_GET_PG(t), 1499 EHCI_ITD_GET_OFFS(t)); 1500 } 1501 printf("ITDbufr: "); 1502 for (i = 0; i < EHCI_ITD_NBUFFERS; i++) 1503 printf("%X,", EHCI_ITD_GET_BPTR(le32toh(itd->itd.itd_bufr[i]))); 1504 1505 b = le32toh(itd->itd.itd_bufr[0]); 1506 b2 = le32toh(itd->itd.itd_bufr[1]); 1507 b3 = le32toh(itd->itd.itd_bufr[2]); 1508 printf("\nep=%X daddr=%X dir=%d maxpkt=%X multi=%X\n", 1509 EHCI_ITD_GET_EP(b), EHCI_ITD_GET_DADDR(b), EHCI_ITD_GET_DIR(b2), 1510 EHCI_ITD_GET_MAXPKT(b2), EHCI_ITD_GET_MULTI(b3)); 1511 } 1512 1513 Static void 1514 ehci_dump_sitd(struct ehci_soft_itd *itd) 1515 { 1516 printf("SITD %p next=%p prev=%p xfernext=%p physaddr=%X slot=%d\n", 1517 itd, itd->u.frame_list.next, itd->u.frame_list.prev, 1518 itd->xfer_next, itd->physaddr, itd->slot); 1519 } 1520 #endif 1521 1522 #ifdef DIAGNOSTIC 1523 Static void 1524 ehci_dump_exfer(struct ehci_xfer *ex) 1525 { 1526 printf("ehci_dump_exfer: ex=%p sqtdstart=%p end=%p itdstart=%p end=%p isdone=%d\n", ex, ex->sqtdstart, ex->sqtdend, ex->itdstart, ex->itdend, ex->isdone); 1527 } 1528 #endif 1529 #endif 1530 1531 Static usbd_status 1532 ehci_open(usbd_pipe_handle pipe) 1533 { 1534 usbd_device_handle dev = pipe->device; 1535 ehci_softc_t *sc = dev->bus->hci_private; 1536 usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc; 1537 u_int8_t addr = dev->address; 1538 u_int8_t xfertype = ed->bmAttributes & UE_XFERTYPE; 1539 struct ehci_pipe *epipe = (struct ehci_pipe *)pipe; 1540 ehci_soft_qh_t *sqh; 1541 usbd_status err; 1542 int s; 1543 int ival, speed, naks; 1544 int hshubaddr, hshubport; 1545 1546 DPRINTFN(1, ("ehci_open: pipe=%p, addr=%d, endpt=%d (%d)\n", 1547 pipe, addr, ed->bEndpointAddress, sc->sc_addr)); 1548 1549 if (dev->myhsport) { 1550 /* 1551 * When directly attached FS/LS device while doing embedded 1552 * transaction translations and we are the hub, set the hub 1553 * adddress to 0 (us). 1554 */ 1555 if (!(sc->sc_flags & EHCIF_ETTF) 1556 || (dev->myhsport->parent->address != sc->sc_addr)) { 1557 hshubaddr = dev->myhsport->parent->address; 1558 } else { 1559 hshubaddr = 0; 1560 } 1561 hshubport = dev->myhsport->portno; 1562 } else { 1563 hshubaddr = 0; 1564 hshubport = 0; 1565 } 1566 1567 if (sc->sc_dying) 1568 return (USBD_IOERROR); 1569 1570 epipe->nexttoggle = 0; 1571 1572 if (addr == sc->sc_addr) { 1573 switch (ed->bEndpointAddress) { 1574 case USB_CONTROL_ENDPOINT: 1575 pipe->methods = &ehci_root_ctrl_methods; 1576 break; 1577 case UE_DIR_IN | EHCI_INTR_ENDPT: 1578 pipe->methods = &ehci_root_intr_methods; 1579 break; 1580 default: 1581 DPRINTF(("ehci_open: bad bEndpointAddress 0x%02x\n", 1582 ed->bEndpointAddress)); 1583 return (USBD_INVAL); 1584 } 1585 return (USBD_NORMAL_COMPLETION); 1586 } 1587 1588 /* XXX All this stuff is only valid for async. */ 1589 switch (dev->speed) { 1590 case USB_SPEED_LOW: speed = EHCI_QH_SPEED_LOW; break; 1591 case USB_SPEED_FULL: speed = EHCI_QH_SPEED_FULL; break; 1592 case USB_SPEED_HIGH: speed = EHCI_QH_SPEED_HIGH; break; 1593 default: panic("ehci_open: bad device speed %d", dev->speed); 1594 } 1595 if (speed != EHCI_QH_SPEED_HIGH && xfertype == UE_ISOCHRONOUS) { 1596 aprint_error_dev(sc->sc_dev, "error opening low/full speed " 1597 "isoc endpoint.\n"); 1598 aprint_normal_dev(sc->sc_dev, "a low/full speed device is " 1599 "attached to a USB2 hub, and transaction translations are " 1600 "not yet supported.\n"); 1601 aprint_normal_dev(sc->sc_dev, "reattach the device to the " 1602 "root hub instead.\n"); 1603 DPRINTFN(1,("ehci_open: hshubaddr=%d hshubport=%d\n", 1604 hshubaddr, hshubport)); 1605 return USBD_INVAL; 1606 } 1607 1608 /* 1609 * For interrupt transfer, nak throttling must be disabled, but for 1610 * the other transfer type, nak throttling should be enabled from the 1611 * veiwpoint that avoids the memory thrashing. 1612 */ 1613 naks = (xfertype == UE_INTERRUPT) ? 0 1614 : ((speed == EHCI_QH_SPEED_HIGH) ? 4 : 0); 1615 1616 /* Allocate sqh for everything, save isoc xfers */ 1617 if (xfertype != UE_ISOCHRONOUS) { 1618 sqh = ehci_alloc_sqh(sc); 1619 if (sqh == NULL) 1620 return (USBD_NOMEM); 1621 /* qh_link filled when the QH is added */ 1622 sqh->qh.qh_endp = htole32( 1623 EHCI_QH_SET_ADDR(addr) | 1624 EHCI_QH_SET_ENDPT(UE_GET_ADDR(ed->bEndpointAddress)) | 1625 EHCI_QH_SET_EPS(speed) | 1626 EHCI_QH_DTC | 1627 EHCI_QH_SET_MPL(UGETW(ed->wMaxPacketSize)) | 1628 (speed != EHCI_QH_SPEED_HIGH && xfertype == UE_CONTROL ? 1629 EHCI_QH_CTL : 0) | 1630 EHCI_QH_SET_NRL(naks) 1631 ); 1632 sqh->qh.qh_endphub = htole32( 1633 EHCI_QH_SET_MULT(1) | 1634 EHCI_QH_SET_SMASK(xfertype == UE_INTERRUPT ? 0x02 : 0) 1635 ); 1636 if (speed != EHCI_QH_SPEED_HIGH) 1637 sqh->qh.qh_endphub |= htole32( 1638 EHCI_QH_SET_PORT(hshubport) | 1639 EHCI_QH_SET_HUBA(hshubaddr) | 1640 EHCI_QH_SET_CMASK(0x08) /* XXX */ 1641 ); 1642 sqh->qh.qh_curqtd = EHCI_NULL; 1643 /* Fill the overlay qTD */ 1644 sqh->qh.qh_qtd.qtd_next = EHCI_NULL; 1645 sqh->qh.qh_qtd.qtd_altnext = EHCI_NULL; 1646 sqh->qh.qh_qtd.qtd_status = htole32(0); 1647 1648 usb_syncmem(&sqh->dma, sqh->offs, sizeof(sqh->qh), 1649 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1650 epipe->sqh = sqh; 1651 } else { 1652 sqh = NULL; 1653 } /*xfertype == UE_ISOC*/ 1654 1655 switch (xfertype) { 1656 case UE_CONTROL: 1657 err = usb_allocmem(&sc->sc_bus, sizeof(usb_device_request_t), 1658 0, &epipe->u.ctl.reqdma); 1659 #ifdef EHCI_DEBUG 1660 if (err) 1661 printf("ehci_open: usb_allocmem()=%d\n", err); 1662 #endif 1663 if (err) 1664 goto bad; 1665 pipe->methods = &ehci_device_ctrl_methods; 1666 s = splusb(); 1667 ehci_add_qh(sqh, sc->sc_async_head); 1668 splx(s); 1669 break; 1670 case UE_BULK: 1671 pipe->methods = &ehci_device_bulk_methods; 1672 s = splusb(); 1673 ehci_add_qh(sqh, sc->sc_async_head); 1674 splx(s); 1675 break; 1676 case UE_INTERRUPT: 1677 pipe->methods = &ehci_device_intr_methods; 1678 ival = pipe->interval; 1679 if (ival == USBD_DEFAULT_INTERVAL) { 1680 if (speed == EHCI_QH_SPEED_HIGH) { 1681 if (ed->bInterval > 16) { 1682 /* 1683 * illegal with high-speed, but there 1684 * were documentation bugs in the spec, 1685 * so be generous 1686 */ 1687 ival = 256; 1688 } else 1689 ival = (1 << (ed->bInterval - 1)) / 8; 1690 } else 1691 ival = ed->bInterval; 1692 } 1693 err = ehci_device_setintr(sc, sqh, ival); 1694 if (err) 1695 goto bad; 1696 break; 1697 case UE_ISOCHRONOUS: 1698 pipe->methods = &ehci_device_isoc_methods; 1699 if (ed->bInterval == 0 || ed->bInterval > 16) { 1700 printf("ehci: opening pipe with invalid bInterval\n"); 1701 err = USBD_INVAL; 1702 goto bad; 1703 } 1704 if (UGETW(ed->wMaxPacketSize) == 0) { 1705 printf("ehci: zero length endpoint open request\n"); 1706 err = USBD_INVAL; 1707 goto bad; 1708 } 1709 epipe->u.isoc.next_frame = 0; 1710 epipe->u.isoc.cur_xfers = 0; 1711 break; 1712 default: 1713 DPRINTF(("ehci: bad xfer type %d\n", xfertype)); 1714 err = USBD_INVAL; 1715 goto bad; 1716 } 1717 return (USBD_NORMAL_COMPLETION); 1718 1719 bad: 1720 if (sqh != NULL) 1721 ehci_free_sqh(sc, sqh); 1722 return (err); 1723 } 1724 1725 /* 1726 * Add an ED to the schedule. Called at splusb(). 1727 */ 1728 Static void 1729 ehci_add_qh(ehci_soft_qh_t *sqh, ehci_soft_qh_t *head) 1730 { 1731 SPLUSBCHECK; 1732 1733 usb_syncmem(&head->dma, head->offs + offsetof(ehci_qh_t, qh_link), 1734 sizeof(head->qh.qh_link), BUS_DMASYNC_POSTWRITE); 1735 sqh->next = head->next; 1736 sqh->qh.qh_link = head->qh.qh_link; 1737 usb_syncmem(&sqh->dma, sqh->offs + offsetof(ehci_qh_t, qh_link), 1738 sizeof(sqh->qh.qh_link), BUS_DMASYNC_PREWRITE); 1739 head->next = sqh; 1740 head->qh.qh_link = htole32(sqh->physaddr | EHCI_LINK_QH); 1741 usb_syncmem(&head->dma, head->offs + offsetof(ehci_qh_t, qh_link), 1742 sizeof(head->qh.qh_link), BUS_DMASYNC_PREWRITE); 1743 1744 #ifdef EHCI_DEBUG 1745 if (ehcidebug > 5) { 1746 printf("ehci_add_qh:\n"); 1747 ehci_dump_sqh(sqh); 1748 } 1749 #endif 1750 } 1751 1752 /* 1753 * Remove an ED from the schedule. Called at splusb(). 1754 */ 1755 Static void 1756 ehci_rem_qh(ehci_softc_t *sc, ehci_soft_qh_t *sqh, ehci_soft_qh_t *head) 1757 { 1758 ehci_soft_qh_t *p; 1759 1760 SPLUSBCHECK; 1761 /* XXX */ 1762 for (p = head; p != NULL && p->next != sqh; p = p->next) 1763 ; 1764 if (p == NULL) 1765 panic("ehci_rem_qh: ED not found"); 1766 usb_syncmem(&sqh->dma, sqh->offs + offsetof(ehci_qh_t, qh_link), 1767 sizeof(sqh->qh.qh_link), BUS_DMASYNC_POSTWRITE); 1768 p->next = sqh->next; 1769 p->qh.qh_link = sqh->qh.qh_link; 1770 usb_syncmem(&p->dma, p->offs + offsetof(ehci_qh_t, qh_link), 1771 sizeof(p->qh.qh_link), BUS_DMASYNC_PREWRITE); 1772 1773 ehci_sync_hc(sc); 1774 } 1775 1776 Static void 1777 ehci_set_qh_qtd(ehci_soft_qh_t *sqh, ehci_soft_qtd_t *sqtd) 1778 { 1779 int i; 1780 u_int32_t status; 1781 1782 /* Save toggle bit and ping status. */ 1783 usb_syncmem(&sqh->dma, sqh->offs, sizeof(sqh->qh), 1784 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 1785 status = sqh->qh.qh_qtd.qtd_status & 1786 htole32(EHCI_QTD_TOGGLE_MASK | 1787 EHCI_QTD_SET_STATUS(EHCI_QTD_PINGSTATE)); 1788 /* Set HALTED to make hw leave it alone. */ 1789 sqh->qh.qh_qtd.qtd_status = 1790 htole32(EHCI_QTD_SET_STATUS(EHCI_QTD_HALTED)); 1791 usb_syncmem(&sqh->dma, 1792 sqh->offs + offsetof(ehci_qh_t, qh_qtd.qtd_status), 1793 sizeof(sqh->qh.qh_qtd.qtd_status), 1794 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1795 sqh->qh.qh_curqtd = 0; 1796 sqh->qh.qh_qtd.qtd_next = htole32(sqtd->physaddr); 1797 sqh->qh.qh_qtd.qtd_altnext = 0; 1798 for (i = 0; i < EHCI_QTD_NBUFFERS; i++) 1799 sqh->qh.qh_qtd.qtd_buffer[i] = 0; 1800 sqh->sqtd = sqtd; 1801 usb_syncmem(&sqh->dma, sqh->offs, sizeof(sqh->qh), 1802 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1803 /* Set !HALTED && !ACTIVE to start execution, preserve some fields */ 1804 sqh->qh.qh_qtd.qtd_status = status; 1805 usb_syncmem(&sqh->dma, 1806 sqh->offs + offsetof(ehci_qh_t, qh_qtd.qtd_status), 1807 sizeof(sqh->qh.qh_qtd.qtd_status), 1808 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1809 } 1810 1811 /* 1812 * Ensure that the HC has released all references to the QH. We do this 1813 * by asking for a Async Advance Doorbell interrupt and then we wait for 1814 * the interrupt. 1815 * To make this easier we first obtain exclusive use of the doorbell. 1816 */ 1817 Static void 1818 ehci_sync_hc(ehci_softc_t *sc) 1819 { 1820 int s, error; 1821 1822 if (sc->sc_dying) { 1823 DPRINTFN(2,("ehci_sync_hc: dying\n")); 1824 return; 1825 } 1826 DPRINTFN(2,("ehci_sync_hc: enter\n")); 1827 mutex_enter(&sc->sc_doorbell_lock); /* get doorbell */ 1828 s = splhardusb(); 1829 /* ask for doorbell */ 1830 EOWRITE4(sc, EHCI_USBCMD, EOREAD4(sc, EHCI_USBCMD) | EHCI_CMD_IAAD); 1831 DPRINTFN(1,("ehci_sync_hc: cmd=0x%08x sts=0x%08x\n", 1832 EOREAD4(sc, EHCI_USBCMD), EOREAD4(sc, EHCI_USBSTS))); 1833 error = tsleep(&sc->sc_async_head, PZERO, "ehcidi", hz); /* bell wait */ 1834 DPRINTFN(1,("ehci_sync_hc: cmd=0x%08x sts=0x%08x\n", 1835 EOREAD4(sc, EHCI_USBCMD), EOREAD4(sc, EHCI_USBSTS))); 1836 splx(s); 1837 mutex_exit(&sc->sc_doorbell_lock); /* release doorbell */ 1838 #ifdef DIAGNOSTIC 1839 if (error) 1840 printf("ehci_sync_hc: tsleep() = %d\n", error); 1841 #endif 1842 DPRINTFN(2,("ehci_sync_hc: exit\n")); 1843 } 1844 1845 /*Call at splusb*/ 1846 Static void 1847 ehci_rem_free_itd_chain(ehci_softc_t *sc, struct ehci_xfer *exfer) 1848 { 1849 struct ehci_soft_itd *itd, *prev; 1850 1851 prev = NULL; 1852 1853 if (exfer->itdstart == NULL || exfer->itdend == NULL) 1854 panic("ehci isoc xfer being freed, but with no itd chain\n"); 1855 1856 for (itd = exfer->itdstart; itd != NULL; itd = itd->xfer_next) { 1857 prev = itd->u.frame_list.prev; 1858 /* Unlink itd from hardware chain, or frame array */ 1859 if (prev == NULL) { /* We're at the table head */ 1860 sc->sc_softitds[itd->slot] = itd->u.frame_list.next; 1861 sc->sc_flist[itd->slot] = itd->itd.itd_next; 1862 usb_syncmem(&sc->sc_fldma, 1863 sizeof(ehci_link_t) * itd->slot, 1864 sizeof(ehci_link_t), 1865 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 1866 1867 if (itd->u.frame_list.next != NULL) 1868 itd->u.frame_list.next->u.frame_list.prev = NULL; 1869 } else { 1870 /* XXX this part is untested... */ 1871 prev->itd.itd_next = itd->itd.itd_next; 1872 usb_syncmem(&itd->dma, 1873 itd->offs + offsetof(ehci_itd_t, itd_next), 1874 sizeof(itd->itd.itd_next), BUS_DMASYNC_PREWRITE); 1875 1876 prev->u.frame_list.next = itd->u.frame_list.next; 1877 if (itd->u.frame_list.next != NULL) 1878 itd->u.frame_list.next->u.frame_list.prev = prev; 1879 } 1880 } 1881 1882 prev = NULL; 1883 for (itd = exfer->itdstart; itd != NULL; itd = itd->xfer_next) { 1884 if (prev != NULL) 1885 ehci_free_itd(sc, prev); 1886 prev = itd; 1887 } 1888 if (prev) 1889 ehci_free_itd(sc, prev); 1890 exfer->itdstart = NULL; 1891 exfer->itdend = NULL; 1892 } 1893 1894 /***********/ 1895 1896 /* 1897 * Data structures and routines to emulate the root hub. 1898 */ 1899 Static usb_device_descriptor_t ehci_devd = { 1900 USB_DEVICE_DESCRIPTOR_SIZE, 1901 UDESC_DEVICE, /* type */ 1902 {0x00, 0x02}, /* USB version */ 1903 UDCLASS_HUB, /* class */ 1904 UDSUBCLASS_HUB, /* subclass */ 1905 UDPROTO_HSHUBSTT, /* protocol */ 1906 64, /* max packet */ 1907 {0},{0},{0x00,0x01}, /* device id */ 1908 1,2,0, /* string indicies */ 1909 1 /* # of configurations */ 1910 }; 1911 1912 Static const usb_device_qualifier_t ehci_odevd = { 1913 USB_DEVICE_DESCRIPTOR_SIZE, 1914 UDESC_DEVICE_QUALIFIER, /* type */ 1915 {0x00, 0x02}, /* USB version */ 1916 UDCLASS_HUB, /* class */ 1917 UDSUBCLASS_HUB, /* subclass */ 1918 UDPROTO_FSHUB, /* protocol */ 1919 64, /* max packet */ 1920 1, /* # of configurations */ 1921 0 1922 }; 1923 1924 Static const usb_config_descriptor_t ehci_confd = { 1925 USB_CONFIG_DESCRIPTOR_SIZE, 1926 UDESC_CONFIG, 1927 {USB_CONFIG_DESCRIPTOR_SIZE + 1928 USB_INTERFACE_DESCRIPTOR_SIZE + 1929 USB_ENDPOINT_DESCRIPTOR_SIZE}, 1930 1, 1931 1, 1932 0, 1933 UC_ATTR_MBO | UC_SELF_POWERED, 1934 0 /* max power */ 1935 }; 1936 1937 Static const usb_interface_descriptor_t ehci_ifcd = { 1938 USB_INTERFACE_DESCRIPTOR_SIZE, 1939 UDESC_INTERFACE, 1940 0, 1941 0, 1942 1, 1943 UICLASS_HUB, 1944 UISUBCLASS_HUB, 1945 UIPROTO_HSHUBSTT, 1946 0 1947 }; 1948 1949 Static const usb_endpoint_descriptor_t ehci_endpd = { 1950 USB_ENDPOINT_DESCRIPTOR_SIZE, 1951 UDESC_ENDPOINT, 1952 UE_DIR_IN | EHCI_INTR_ENDPT, 1953 UE_INTERRUPT, 1954 {8, 0}, /* max packet */ 1955 12 1956 }; 1957 1958 Static const usb_hub_descriptor_t ehci_hubd = { 1959 USB_HUB_DESCRIPTOR_SIZE, 1960 UDESC_HUB, 1961 0, 1962 {0,0}, 1963 0, 1964 0, 1965 {""}, 1966 {""}, 1967 }; 1968 1969 /* 1970 * Simulate a hardware hub by handling all the necessary requests. 1971 */ 1972 Static usbd_status 1973 ehci_root_ctrl_transfer(usbd_xfer_handle xfer) 1974 { 1975 usbd_status err; 1976 1977 /* Insert last in queue. */ 1978 err = usb_insert_transfer(xfer); 1979 if (err) 1980 return (err); 1981 1982 /* Pipe isn't running, start first */ 1983 return (ehci_root_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 1984 } 1985 1986 Static usbd_status 1987 ehci_root_ctrl_start(usbd_xfer_handle xfer) 1988 { 1989 ehci_softc_t *sc = xfer->pipe->device->bus->hci_private; 1990 usb_device_request_t *req; 1991 void *buf = NULL; 1992 int port, i; 1993 int s, len, value, index, l, totlen = 0; 1994 usb_port_status_t ps; 1995 usb_hub_descriptor_t hubd; 1996 usbd_status err; 1997 u_int32_t v; 1998 1999 if (sc->sc_dying) 2000 return (USBD_IOERROR); 2001 2002 #ifdef DIAGNOSTIC 2003 if (!(xfer->rqflags & URQ_REQUEST)) 2004 /* XXX panic */ 2005 return (USBD_INVAL); 2006 #endif 2007 req = &xfer->request; 2008 2009 DPRINTFN(4,("ehci_root_ctrl_start: type=0x%02x request=%02x\n", 2010 req->bmRequestType, req->bRequest)); 2011 2012 len = UGETW(req->wLength); 2013 value = UGETW(req->wValue); 2014 index = UGETW(req->wIndex); 2015 2016 if (len != 0) 2017 buf = KERNADDR(&xfer->dmabuf, 0); 2018 2019 #define C(x,y) ((x) | ((y) << 8)) 2020 switch(C(req->bRequest, req->bmRequestType)) { 2021 case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE): 2022 case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE): 2023 case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT): 2024 /* 2025 * DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops 2026 * for the integrated root hub. 2027 */ 2028 break; 2029 case C(UR_GET_CONFIG, UT_READ_DEVICE): 2030 if (len > 0) { 2031 *(u_int8_t *)buf = sc->sc_conf; 2032 totlen = 1; 2033 } 2034 break; 2035 case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): 2036 DPRINTFN(8,("ehci_root_ctrl_start: wValue=0x%04x\n", value)); 2037 if (len == 0) 2038 break; 2039 switch(value >> 8) { 2040 case UDESC_DEVICE: 2041 if ((value & 0xff) != 0) { 2042 err = USBD_IOERROR; 2043 goto ret; 2044 } 2045 totlen = l = min(len, USB_DEVICE_DESCRIPTOR_SIZE); 2046 USETW(ehci_devd.idVendor, sc->sc_id_vendor); 2047 memcpy(buf, &ehci_devd, l); 2048 break; 2049 /* 2050 * We can't really operate at another speed, but the spec says 2051 * we need this descriptor. 2052 */ 2053 case UDESC_DEVICE_QUALIFIER: 2054 if ((value & 0xff) != 0) { 2055 err = USBD_IOERROR; 2056 goto ret; 2057 } 2058 totlen = l = min(len, USB_DEVICE_DESCRIPTOR_SIZE); 2059 memcpy(buf, &ehci_odevd, l); 2060 break; 2061 /* 2062 * We can't really operate at another speed, but the spec says 2063 * we need this descriptor. 2064 */ 2065 case UDESC_OTHER_SPEED_CONFIGURATION: 2066 case UDESC_CONFIG: 2067 if ((value & 0xff) != 0) { 2068 err = USBD_IOERROR; 2069 goto ret; 2070 } 2071 totlen = l = min(len, USB_CONFIG_DESCRIPTOR_SIZE); 2072 memcpy(buf, &ehci_confd, l); 2073 ((usb_config_descriptor_t *)buf)->bDescriptorType = 2074 value >> 8; 2075 buf = (char *)buf + l; 2076 len -= l; 2077 l = min(len, USB_INTERFACE_DESCRIPTOR_SIZE); 2078 totlen += l; 2079 memcpy(buf, &ehci_ifcd, l); 2080 buf = (char *)buf + l; 2081 len -= l; 2082 l = min(len, USB_ENDPOINT_DESCRIPTOR_SIZE); 2083 totlen += l; 2084 memcpy(buf, &ehci_endpd, l); 2085 break; 2086 case UDESC_STRING: 2087 #define sd ((usb_string_descriptor_t *)buf) 2088 switch (value & 0xff) { 2089 case 0: /* Language table */ 2090 totlen = usb_makelangtbl(sd, len); 2091 break; 2092 case 1: /* Vendor */ 2093 totlen = usb_makestrdesc(sd, len, 2094 sc->sc_vendor); 2095 break; 2096 case 2: /* Product */ 2097 totlen = usb_makestrdesc(sd, len, 2098 "EHCI root hub"); 2099 break; 2100 } 2101 #undef sd 2102 break; 2103 default: 2104 err = USBD_IOERROR; 2105 goto ret; 2106 } 2107 break; 2108 case C(UR_GET_INTERFACE, UT_READ_INTERFACE): 2109 if (len > 0) { 2110 *(u_int8_t *)buf = 0; 2111 totlen = 1; 2112 } 2113 break; 2114 case C(UR_GET_STATUS, UT_READ_DEVICE): 2115 if (len > 1) { 2116 USETW(((usb_status_t *)buf)->wStatus,UDS_SELF_POWERED); 2117 totlen = 2; 2118 } 2119 break; 2120 case C(UR_GET_STATUS, UT_READ_INTERFACE): 2121 case C(UR_GET_STATUS, UT_READ_ENDPOINT): 2122 if (len > 1) { 2123 USETW(((usb_status_t *)buf)->wStatus, 0); 2124 totlen = 2; 2125 } 2126 break; 2127 case C(UR_SET_ADDRESS, UT_WRITE_DEVICE): 2128 if (value >= USB_MAX_DEVICES) { 2129 err = USBD_IOERROR; 2130 goto ret; 2131 } 2132 sc->sc_addr = value; 2133 break; 2134 case C(UR_SET_CONFIG, UT_WRITE_DEVICE): 2135 if (value != 0 && value != 1) { 2136 err = USBD_IOERROR; 2137 goto ret; 2138 } 2139 sc->sc_conf = value; 2140 break; 2141 case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE): 2142 break; 2143 case C(UR_SET_FEATURE, UT_WRITE_DEVICE): 2144 case C(UR_SET_FEATURE, UT_WRITE_INTERFACE): 2145 case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT): 2146 err = USBD_IOERROR; 2147 goto ret; 2148 case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE): 2149 break; 2150 case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT): 2151 break; 2152 /* Hub requests */ 2153 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): 2154 break; 2155 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): 2156 DPRINTFN(4, ("ehci_root_ctrl_start: UR_CLEAR_PORT_FEATURE " 2157 "port=%d feature=%d\n", 2158 index, value)); 2159 if (index < 1 || index > sc->sc_noport) { 2160 err = USBD_IOERROR; 2161 goto ret; 2162 } 2163 port = EHCI_PORTSC(index); 2164 v = EOREAD4(sc, port); 2165 DPRINTFN(4, ("ehci_root_ctrl_start: portsc=0x%08x\n", v)); 2166 v &= ~EHCI_PS_CLEAR; 2167 switch(value) { 2168 case UHF_PORT_ENABLE: 2169 EOWRITE4(sc, port, v &~ EHCI_PS_PE); 2170 break; 2171 case UHF_PORT_SUSPEND: 2172 if (!(v & EHCI_PS_SUSP)) /* not suspended */ 2173 break; 2174 v &= ~EHCI_PS_SUSP; 2175 EOWRITE4(sc, port, v | EHCI_PS_FPR); 2176 /* see USB2 spec ch. 7.1.7.7 */ 2177 usb_delay_ms(&sc->sc_bus, 20); 2178 EOWRITE4(sc, port, v); 2179 usb_delay_ms(&sc->sc_bus, 2); 2180 #ifdef DEBUG 2181 v = EOREAD4(sc, port); 2182 if (v & (EHCI_PS_FPR | EHCI_PS_SUSP)) 2183 printf("ehci: resume failed: %x\n", v); 2184 #endif 2185 break; 2186 case UHF_PORT_POWER: 2187 if (sc->sc_hasppc) 2188 EOWRITE4(sc, port, v &~ EHCI_PS_PP); 2189 break; 2190 case UHF_PORT_TEST: 2191 DPRINTFN(2,("ehci_root_ctrl_start: clear port test " 2192 "%d\n", index)); 2193 break; 2194 case UHF_PORT_INDICATOR: 2195 DPRINTFN(2,("ehci_root_ctrl_start: clear port ind " 2196 "%d\n", index)); 2197 EOWRITE4(sc, port, v &~ EHCI_PS_PIC); 2198 break; 2199 case UHF_C_PORT_CONNECTION: 2200 EOWRITE4(sc, port, v | EHCI_PS_CSC); 2201 break; 2202 case UHF_C_PORT_ENABLE: 2203 EOWRITE4(sc, port, v | EHCI_PS_PEC); 2204 break; 2205 case UHF_C_PORT_SUSPEND: 2206 /* how? */ 2207 break; 2208 case UHF_C_PORT_OVER_CURRENT: 2209 EOWRITE4(sc, port, v | EHCI_PS_OCC); 2210 break; 2211 case UHF_C_PORT_RESET: 2212 sc->sc_isreset[index] = 0; 2213 break; 2214 default: 2215 err = USBD_IOERROR; 2216 goto ret; 2217 } 2218 #if 0 2219 switch(value) { 2220 case UHF_C_PORT_CONNECTION: 2221 case UHF_C_PORT_ENABLE: 2222 case UHF_C_PORT_SUSPEND: 2223 case UHF_C_PORT_OVER_CURRENT: 2224 case UHF_C_PORT_RESET: 2225 default: 2226 break; 2227 } 2228 #endif 2229 break; 2230 case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): 2231 if (len == 0) 2232 break; 2233 if ((value & 0xff) != 0) { 2234 err = USBD_IOERROR; 2235 goto ret; 2236 } 2237 hubd = ehci_hubd; 2238 hubd.bNbrPorts = sc->sc_noport; 2239 v = EOREAD4(sc, EHCI_HCSPARAMS); 2240 USETW(hubd.wHubCharacteristics, 2241 EHCI_HCS_PPC(v) ? UHD_PWR_INDIVIDUAL : UHD_PWR_NO_SWITCH | 2242 EHCI_HCS_P_INDICATOR(EREAD4(sc, EHCI_HCSPARAMS)) 2243 ? UHD_PORT_IND : 0); 2244 hubd.bPwrOn2PwrGood = 200; /* XXX can't find out? */ 2245 for (i = 0, l = sc->sc_noport; l > 0; i++, l -= 8, v >>= 8) 2246 hubd.DeviceRemovable[i++] = 0; /* XXX can't find out? */ 2247 hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE + i; 2248 l = min(len, hubd.bDescLength); 2249 totlen = l; 2250 memcpy(buf, &hubd, l); 2251 break; 2252 case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): 2253 if (len != 4) { 2254 err = USBD_IOERROR; 2255 goto ret; 2256 } 2257 memset(buf, 0, len); /* ? XXX */ 2258 totlen = len; 2259 break; 2260 case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): 2261 DPRINTFN(8,("ehci_root_ctrl_start: get port status i=%d\n", 2262 index)); 2263 if (index < 1 || index > sc->sc_noport) { 2264 err = USBD_IOERROR; 2265 goto ret; 2266 } 2267 if (len != 4) { 2268 err = USBD_IOERROR; 2269 goto ret; 2270 } 2271 v = EOREAD4(sc, EHCI_PORTSC(index)); 2272 DPRINTFN(8,("ehci_root_ctrl_start: port status=0x%04x\n", 2273 v)); 2274 2275 if (sc->sc_flags & EHCIF_ETTF) { 2276 /* 2277 * If we are doing embedded transaction translation, 2278 * then directly attached LS/FS devices are reset by 2279 * the EHCI controller itself. PSPD is encoded 2280 * the same way as in USBSTATUS. 2281 */ 2282 i = __SHIFTOUT(v, EHCI_PS_PSPD) * UPS_LOW_SPEED; 2283 } else { 2284 i = UPS_HIGH_SPEED; 2285 } 2286 if (v & EHCI_PS_CS) i |= UPS_CURRENT_CONNECT_STATUS; 2287 if (v & EHCI_PS_PE) i |= UPS_PORT_ENABLED; 2288 if (v & EHCI_PS_SUSP) i |= UPS_SUSPEND; 2289 if (v & EHCI_PS_OCA) i |= UPS_OVERCURRENT_INDICATOR; 2290 if (v & EHCI_PS_PR) i |= UPS_RESET; 2291 if (v & EHCI_PS_PP) i |= UPS_PORT_POWER; 2292 if (sc->sc_vendor_port_status) 2293 i = sc->sc_vendor_port_status(sc, v, i); 2294 USETW(ps.wPortStatus, i); 2295 i = 0; 2296 if (v & EHCI_PS_CSC) i |= UPS_C_CONNECT_STATUS; 2297 if (v & EHCI_PS_PEC) i |= UPS_C_PORT_ENABLED; 2298 if (v & EHCI_PS_OCC) i |= UPS_C_OVERCURRENT_INDICATOR; 2299 if (sc->sc_isreset[index]) i |= UPS_C_PORT_RESET; 2300 USETW(ps.wPortChange, i); 2301 l = min(len, sizeof ps); 2302 memcpy(buf, &ps, l); 2303 totlen = l; 2304 break; 2305 case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): 2306 err = USBD_IOERROR; 2307 goto ret; 2308 case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): 2309 break; 2310 case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): 2311 if (index < 1 || index > sc->sc_noport) { 2312 err = USBD_IOERROR; 2313 goto ret; 2314 } 2315 port = EHCI_PORTSC(index); 2316 v = EOREAD4(sc, port); 2317 DPRINTFN(4, ("ehci_root_ctrl_start: portsc=0x%08x\n", v)); 2318 v &= ~EHCI_PS_CLEAR; 2319 switch(value) { 2320 case UHF_PORT_ENABLE: 2321 EOWRITE4(sc, port, v | EHCI_PS_PE); 2322 break; 2323 case UHF_PORT_SUSPEND: 2324 EOWRITE4(sc, port, v | EHCI_PS_SUSP); 2325 break; 2326 case UHF_PORT_RESET: 2327 DPRINTFN(5,("ehci_root_ctrl_start: reset port %d\n", 2328 index)); 2329 if (EHCI_PS_IS_LOWSPEED(v) 2330 && sc->sc_ncomp > 0 2331 && !(sc->sc_flags & EHCIF_ETTF)) { 2332 /* 2333 * Low speed device on non-ETTF controller or 2334 * unaccompanied controller, give up ownership. 2335 */ 2336 ehci_disown(sc, index, 1); 2337 break; 2338 } 2339 /* Start reset sequence. */ 2340 v &= ~ (EHCI_PS_PE | EHCI_PS_PR); 2341 EOWRITE4(sc, port, v | EHCI_PS_PR); 2342 /* Wait for reset to complete. */ 2343 usb_delay_ms(&sc->sc_bus, USB_PORT_ROOT_RESET_DELAY); 2344 if (sc->sc_dying) { 2345 err = USBD_IOERROR; 2346 goto ret; 2347 } 2348 /* 2349 * An embedded transaction translater will automatically 2350 * terminate the reset sequence so there's no need to 2351 * it. 2352 */ 2353 if (!(sc->sc_flags & EHCIF_ETTF)) { 2354 /* Terminate reset sequence. */ 2355 v = EOREAD4(sc, port); 2356 EOWRITE4(sc, port, v & ~EHCI_PS_PR); 2357 /* Wait for HC to complete reset. */ 2358 usb_delay_ms(&sc->sc_bus, 2359 EHCI_PORT_RESET_COMPLETE); 2360 if (sc->sc_dying) { 2361 err = USBD_IOERROR; 2362 goto ret; 2363 } 2364 } 2365 2366 v = EOREAD4(sc, port); 2367 DPRINTF(("ehci after reset, status=0x%08x\n", v)); 2368 if (v & EHCI_PS_PR) { 2369 printf("%s: port reset timeout\n", 2370 device_xname(sc->sc_dev)); 2371 return (USBD_TIMEOUT); 2372 } 2373 if (!(v & EHCI_PS_PE)) { 2374 /* Not a high speed device, give up ownership.*/ 2375 ehci_disown(sc, index, 0); 2376 break; 2377 } 2378 sc->sc_isreset[index] = 1; 2379 DPRINTF(("ehci port %d reset, status = 0x%08x\n", 2380 index, v)); 2381 break; 2382 case UHF_PORT_POWER: 2383 DPRINTFN(2,("ehci_root_ctrl_start: set port power " 2384 "%d (has PPC = %d)\n", index, 2385 sc->sc_hasppc)); 2386 if (sc->sc_hasppc) 2387 EOWRITE4(sc, port, v | EHCI_PS_PP); 2388 break; 2389 case UHF_PORT_TEST: 2390 DPRINTFN(2,("ehci_root_ctrl_start: set port test " 2391 "%d\n", index)); 2392 break; 2393 case UHF_PORT_INDICATOR: 2394 DPRINTFN(2,("ehci_root_ctrl_start: set port ind " 2395 "%d\n", index)); 2396 EOWRITE4(sc, port, v | EHCI_PS_PIC); 2397 break; 2398 default: 2399 err = USBD_IOERROR; 2400 goto ret; 2401 } 2402 break; 2403 case C(UR_CLEAR_TT_BUFFER, UT_WRITE_CLASS_OTHER): 2404 case C(UR_RESET_TT, UT_WRITE_CLASS_OTHER): 2405 case C(UR_GET_TT_STATE, UT_READ_CLASS_OTHER): 2406 case C(UR_STOP_TT, UT_WRITE_CLASS_OTHER): 2407 break; 2408 default: 2409 err = USBD_IOERROR; 2410 goto ret; 2411 } 2412 xfer->actlen = totlen; 2413 err = USBD_NORMAL_COMPLETION; 2414 ret: 2415 xfer->status = err; 2416 s = splusb(); 2417 usb_transfer_complete(xfer); 2418 splx(s); 2419 return (USBD_IN_PROGRESS); 2420 } 2421 2422 Static void 2423 ehci_disown(ehci_softc_t *sc, int index, int lowspeed) 2424 { 2425 int port; 2426 u_int32_t v; 2427 2428 DPRINTF(("ehci_disown: index=%d lowspeed=%d\n", index, lowspeed)); 2429 #ifdef DIAGNOSTIC 2430 if (sc->sc_npcomp != 0) { 2431 int i = (index-1) / sc->sc_npcomp; 2432 if (i >= sc->sc_ncomp) 2433 printf("%s: strange port\n", 2434 device_xname(sc->sc_dev)); 2435 else 2436 printf("%s: handing over %s speed device on " 2437 "port %d to %s\n", 2438 device_xname(sc->sc_dev), 2439 lowspeed ? "low" : "full", 2440 index, device_xname(sc->sc_comps[i])); 2441 } else { 2442 printf("%s: npcomp == 0\n", device_xname(sc->sc_dev)); 2443 } 2444 #endif 2445 port = EHCI_PORTSC(index); 2446 v = EOREAD4(sc, port) &~ EHCI_PS_CLEAR; 2447 EOWRITE4(sc, port, v | EHCI_PS_PO); 2448 } 2449 2450 /* Abort a root control request. */ 2451 Static void 2452 ehci_root_ctrl_abort(usbd_xfer_handle xfer) 2453 { 2454 /* Nothing to do, all transfers are synchronous. */ 2455 } 2456 2457 /* Close the root pipe. */ 2458 Static void 2459 ehci_root_ctrl_close(usbd_pipe_handle pipe) 2460 { 2461 DPRINTF(("ehci_root_ctrl_close\n")); 2462 /* Nothing to do. */ 2463 } 2464 2465 Static void 2466 ehci_root_intr_done(usbd_xfer_handle xfer) 2467 { 2468 xfer->hcpriv = NULL; 2469 } 2470 2471 Static usbd_status 2472 ehci_root_intr_transfer(usbd_xfer_handle xfer) 2473 { 2474 usbd_status err; 2475 2476 /* Insert last in queue. */ 2477 err = usb_insert_transfer(xfer); 2478 if (err) 2479 return (err); 2480 2481 /* Pipe isn't running, start first */ 2482 return (ehci_root_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 2483 } 2484 2485 Static usbd_status 2486 ehci_root_intr_start(usbd_xfer_handle xfer) 2487 { 2488 usbd_pipe_handle pipe = xfer->pipe; 2489 ehci_softc_t *sc = pipe->device->bus->hci_private; 2490 2491 if (sc->sc_dying) 2492 return (USBD_IOERROR); 2493 2494 sc->sc_intrxfer = xfer; 2495 2496 return (USBD_IN_PROGRESS); 2497 } 2498 2499 /* Abort a root interrupt request. */ 2500 Static void 2501 ehci_root_intr_abort(usbd_xfer_handle xfer) 2502 { 2503 int s; 2504 2505 if (xfer->pipe->intrxfer == xfer) { 2506 DPRINTF(("ehci_root_intr_abort: remove\n")); 2507 xfer->pipe->intrxfer = NULL; 2508 } 2509 xfer->status = USBD_CANCELLED; 2510 s = splusb(); 2511 usb_transfer_complete(xfer); 2512 splx(s); 2513 } 2514 2515 /* Close the root pipe. */ 2516 Static void 2517 ehci_root_intr_close(usbd_pipe_handle pipe) 2518 { 2519 ehci_softc_t *sc = pipe->device->bus->hci_private; 2520 2521 DPRINTF(("ehci_root_intr_close\n")); 2522 2523 sc->sc_intrxfer = NULL; 2524 } 2525 2526 Static void 2527 ehci_root_ctrl_done(usbd_xfer_handle xfer) 2528 { 2529 xfer->hcpriv = NULL; 2530 } 2531 2532 /************************/ 2533 2534 Static ehci_soft_qh_t * 2535 ehci_alloc_sqh(ehci_softc_t *sc) 2536 { 2537 ehci_soft_qh_t *sqh; 2538 usbd_status err; 2539 int i, offs; 2540 usb_dma_t dma; 2541 2542 if (sc->sc_freeqhs == NULL) { 2543 DPRINTFN(2, ("ehci_alloc_sqh: allocating chunk\n")); 2544 err = usb_allocmem(&sc->sc_bus, EHCI_SQH_SIZE * EHCI_SQH_CHUNK, 2545 EHCI_PAGE_SIZE, &dma); 2546 #ifdef EHCI_DEBUG 2547 if (err) 2548 printf("ehci_alloc_sqh: usb_allocmem()=%d\n", err); 2549 #endif 2550 if (err) 2551 return (NULL); 2552 for(i = 0; i < EHCI_SQH_CHUNK; i++) { 2553 offs = i * EHCI_SQH_SIZE; 2554 sqh = KERNADDR(&dma, offs); 2555 sqh->physaddr = DMAADDR(&dma, offs); 2556 sqh->dma = dma; 2557 sqh->offs = offs; 2558 sqh->next = sc->sc_freeqhs; 2559 sc->sc_freeqhs = sqh; 2560 } 2561 } 2562 sqh = sc->sc_freeqhs; 2563 sc->sc_freeqhs = sqh->next; 2564 memset(&sqh->qh, 0, sizeof(ehci_qh_t)); 2565 sqh->next = NULL; 2566 return (sqh); 2567 } 2568 2569 Static void 2570 ehci_free_sqh(ehci_softc_t *sc, ehci_soft_qh_t *sqh) 2571 { 2572 sqh->next = sc->sc_freeqhs; 2573 sc->sc_freeqhs = sqh; 2574 } 2575 2576 Static ehci_soft_qtd_t * 2577 ehci_alloc_sqtd(ehci_softc_t *sc) 2578 { 2579 ehci_soft_qtd_t *sqtd; 2580 usbd_status err; 2581 int i, offs; 2582 usb_dma_t dma; 2583 int s; 2584 2585 if (sc->sc_freeqtds == NULL) { 2586 DPRINTFN(2, ("ehci_alloc_sqtd: allocating chunk\n")); 2587 err = usb_allocmem(&sc->sc_bus, EHCI_SQTD_SIZE*EHCI_SQTD_CHUNK, 2588 EHCI_PAGE_SIZE, &dma); 2589 #ifdef EHCI_DEBUG 2590 if (err) 2591 printf("ehci_alloc_sqtd: usb_allocmem()=%d\n", err); 2592 #endif 2593 if (err) 2594 return (NULL); 2595 s = splusb(); 2596 for(i = 0; i < EHCI_SQTD_CHUNK; i++) { 2597 offs = i * EHCI_SQTD_SIZE; 2598 sqtd = KERNADDR(&dma, offs); 2599 sqtd->physaddr = DMAADDR(&dma, offs); 2600 sqtd->dma = dma; 2601 sqtd->offs = offs; 2602 sqtd->nextqtd = sc->sc_freeqtds; 2603 sc->sc_freeqtds = sqtd; 2604 } 2605 splx(s); 2606 } 2607 2608 s = splusb(); 2609 sqtd = sc->sc_freeqtds; 2610 sc->sc_freeqtds = sqtd->nextqtd; 2611 memset(&sqtd->qtd, 0, sizeof(ehci_qtd_t)); 2612 sqtd->nextqtd = NULL; 2613 sqtd->xfer = NULL; 2614 splx(s); 2615 2616 return (sqtd); 2617 } 2618 2619 Static void 2620 ehci_free_sqtd(ehci_softc_t *sc, ehci_soft_qtd_t *sqtd) 2621 { 2622 int s; 2623 2624 s = splusb(); 2625 sqtd->nextqtd = sc->sc_freeqtds; 2626 sc->sc_freeqtds = sqtd; 2627 splx(s); 2628 } 2629 2630 Static usbd_status 2631 ehci_alloc_sqtd_chain(struct ehci_pipe *epipe, ehci_softc_t *sc, 2632 int alen, int rd, usbd_xfer_handle xfer, 2633 ehci_soft_qtd_t **sp, ehci_soft_qtd_t **ep) 2634 { 2635 ehci_soft_qtd_t *next, *cur; 2636 ehci_physaddr_t dataphys, dataphyspage, dataphyslastpage, nextphys; 2637 u_int32_t qtdstatus; 2638 int len, curlen, mps; 2639 int i, tog; 2640 usb_dma_t *dma = &xfer->dmabuf; 2641 u_int16_t flags = xfer->flags; 2642 2643 DPRINTFN(alen<4*4096,("ehci_alloc_sqtd_chain: start len=%d\n", alen)); 2644 2645 len = alen; 2646 dataphys = DMAADDR(dma, 0); 2647 dataphyslastpage = EHCI_PAGE(dataphys + len - 1); 2648 qtdstatus = EHCI_QTD_ACTIVE | 2649 EHCI_QTD_SET_PID(rd ? EHCI_QTD_PID_IN : EHCI_QTD_PID_OUT) | 2650 EHCI_QTD_SET_CERR(3) 2651 /* IOC set below */ 2652 /* BYTES set below */ 2653 ; 2654 mps = UGETW(epipe->pipe.endpoint->edesc->wMaxPacketSize); 2655 tog = epipe->nexttoggle; 2656 qtdstatus |= EHCI_QTD_SET_TOGGLE(tog); 2657 2658 cur = ehci_alloc_sqtd(sc); 2659 *sp = cur; 2660 if (cur == NULL) 2661 goto nomem; 2662 2663 usb_syncmem(dma, 0, alen, 2664 rd ? BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE); 2665 for (;;) { 2666 dataphyspage = EHCI_PAGE(dataphys); 2667 /* The EHCI hardware can handle at most 5 pages. */ 2668 if (dataphyslastpage - dataphyspage < 2669 EHCI_QTD_NBUFFERS * EHCI_PAGE_SIZE) { 2670 /* we can handle it in this QTD */ 2671 curlen = len; 2672 } else { 2673 /* must use multiple TDs, fill as much as possible. */ 2674 curlen = EHCI_QTD_NBUFFERS * EHCI_PAGE_SIZE - 2675 EHCI_PAGE_OFFSET(dataphys); 2676 #ifdef DIAGNOSTIC 2677 if (curlen > len) { 2678 printf("ehci_alloc_sqtd_chain: curlen=0x%x " 2679 "len=0x%x offs=0x%x\n", curlen, len, 2680 EHCI_PAGE_OFFSET(dataphys)); 2681 printf("lastpage=0x%x page=0x%x phys=0x%x\n", 2682 dataphyslastpage, dataphyspage, 2683 dataphys); 2684 curlen = len; 2685 } 2686 #endif 2687 /* the length must be a multiple of the max size */ 2688 curlen -= curlen % mps; 2689 DPRINTFN(1,("ehci_alloc_sqtd_chain: multiple QTDs, " 2690 "curlen=%d\n", curlen)); 2691 #ifdef DIAGNOSTIC 2692 if (curlen == 0) 2693 panic("ehci_alloc_sqtd_chain: curlen == 0"); 2694 #endif 2695 } 2696 DPRINTFN(4,("ehci_alloc_sqtd_chain: dataphys=0x%08x " 2697 "dataphyslastpage=0x%08x len=%d curlen=%d\n", 2698 dataphys, dataphyslastpage, 2699 len, curlen)); 2700 len -= curlen; 2701 2702 /* 2703 * Allocate another transfer if there's more data left, 2704 * or if force last short transfer flag is set and we're 2705 * allocating a multiple of the max packet size. 2706 */ 2707 if (len != 0 || 2708 ((curlen % mps) == 0 && !rd && curlen != 0 && 2709 (flags & USBD_FORCE_SHORT_XFER))) { 2710 next = ehci_alloc_sqtd(sc); 2711 if (next == NULL) 2712 goto nomem; 2713 nextphys = htole32(next->physaddr); 2714 } else { 2715 next = NULL; 2716 nextphys = EHCI_NULL; 2717 } 2718 2719 for (i = 0; i * EHCI_PAGE_SIZE < 2720 curlen + EHCI_PAGE_OFFSET(dataphys); i++) { 2721 ehci_physaddr_t a = dataphys + i * EHCI_PAGE_SIZE; 2722 if (i != 0) /* use offset only in first buffer */ 2723 a = EHCI_PAGE(a); 2724 cur->qtd.qtd_buffer[i] = htole32(a); 2725 cur->qtd.qtd_buffer_hi[i] = 0; 2726 #ifdef DIAGNOSTIC 2727 if (i >= EHCI_QTD_NBUFFERS) { 2728 printf("ehci_alloc_sqtd_chain: i=%d\n", i); 2729 goto nomem; 2730 } 2731 #endif 2732 } 2733 cur->nextqtd = next; 2734 cur->qtd.qtd_next = cur->qtd.qtd_altnext = nextphys; 2735 cur->qtd.qtd_status = 2736 htole32(qtdstatus | EHCI_QTD_SET_BYTES(curlen)); 2737 cur->xfer = xfer; 2738 cur->len = curlen; 2739 2740 DPRINTFN(10,("ehci_alloc_sqtd_chain: cbp=0x%08x end=0x%08x\n", 2741 dataphys, dataphys + curlen)); 2742 /* adjust the toggle based on the number of packets in this 2743 qtd */ 2744 if (((curlen + mps - 1) / mps) & 1) { 2745 tog ^= 1; 2746 qtdstatus ^= EHCI_QTD_TOGGLE_MASK; 2747 } 2748 if (next == NULL) 2749 break; 2750 usb_syncmem(&cur->dma, cur->offs, sizeof(cur->qtd), 2751 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2752 DPRINTFN(10,("ehci_alloc_sqtd_chain: extend chain\n")); 2753 if (len) 2754 dataphys += curlen; 2755 cur = next; 2756 } 2757 cur->qtd.qtd_status |= htole32(EHCI_QTD_IOC); 2758 usb_syncmem(&cur->dma, cur->offs, sizeof(cur->qtd), 2759 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2760 *ep = cur; 2761 epipe->nexttoggle = tog; 2762 2763 DPRINTFN(10,("ehci_alloc_sqtd_chain: return sqtd=%p sqtdend=%p\n", 2764 *sp, *ep)); 2765 2766 return (USBD_NORMAL_COMPLETION); 2767 2768 nomem: 2769 /* XXX free chain */ 2770 DPRINTFN(-1,("ehci_alloc_sqtd_chain: no memory\n")); 2771 return (USBD_NOMEM); 2772 } 2773 2774 Static void 2775 ehci_free_sqtd_chain(ehci_softc_t *sc, ehci_soft_qtd_t *sqtd, 2776 ehci_soft_qtd_t *sqtdend) 2777 { 2778 ehci_soft_qtd_t *p; 2779 int i; 2780 2781 DPRINTFN(10,("ehci_free_sqtd_chain: sqtd=%p sqtdend=%p\n", 2782 sqtd, sqtdend)); 2783 2784 for (i = 0; sqtd != sqtdend; sqtd = p, i++) { 2785 p = sqtd->nextqtd; 2786 ehci_free_sqtd(sc, sqtd); 2787 } 2788 } 2789 2790 Static ehci_soft_itd_t * 2791 ehci_alloc_itd(ehci_softc_t *sc) 2792 { 2793 struct ehci_soft_itd *itd, *freeitd; 2794 usbd_status err; 2795 int i, s, offs, frindex, previndex; 2796 usb_dma_t dma; 2797 2798 s = splusb(); 2799 2800 /* Find an itd that wasn't freed this frame or last frame. This can 2801 * discard itds that were freed before frindex wrapped around 2802 * XXX - can this lead to thrashing? Could fix by enabling wrap-around 2803 * interrupt and fiddling with list when that happens */ 2804 frindex = (EOREAD4(sc, EHCI_FRINDEX) + 1) >> 3; 2805 previndex = (frindex != 0) ? frindex - 1 : sc->sc_flsize; 2806 2807 freeitd = NULL; 2808 LIST_FOREACH(itd, &sc->sc_freeitds, u.free_list) { 2809 if (itd == NULL) 2810 break; 2811 if (itd->slot != frindex && itd->slot != previndex) { 2812 freeitd = itd; 2813 break; 2814 } 2815 } 2816 2817 if (freeitd == NULL) { 2818 DPRINTFN(2, ("ehci_alloc_itd allocating chunk\n")); 2819 err = usb_allocmem(&sc->sc_bus, EHCI_ITD_SIZE * EHCI_ITD_CHUNK, 2820 EHCI_PAGE_SIZE, &dma); 2821 2822 if (err) { 2823 DPRINTF(("ehci_alloc_itd, alloc returned %d\n", err)); 2824 return NULL; 2825 } 2826 2827 for (i = 0; i < EHCI_ITD_CHUNK; i++) { 2828 offs = i * EHCI_ITD_SIZE; 2829 itd = KERNADDR(&dma, offs); 2830 itd->physaddr = DMAADDR(&dma, offs); 2831 itd->dma = dma; 2832 itd->offs = offs; 2833 LIST_INSERT_HEAD(&sc->sc_freeitds, itd, u.free_list); 2834 } 2835 freeitd = LIST_FIRST(&sc->sc_freeitds); 2836 } 2837 2838 itd = freeitd; 2839 LIST_REMOVE(itd, u.free_list); 2840 memset(&itd->itd, 0, sizeof(ehci_itd_t)); 2841 usb_syncmem(&itd->dma, itd->offs + offsetof(ehci_itd_t, itd_next), 2842 sizeof(itd->itd.itd_next), BUS_DMASYNC_PREWRITE | 2843 BUS_DMASYNC_PREREAD); 2844 2845 itd->u.frame_list.next = NULL; 2846 itd->u.frame_list.prev = NULL; 2847 itd->xfer_next = NULL; 2848 itd->slot = 0; 2849 splx(s); 2850 2851 return itd; 2852 } 2853 2854 Static void 2855 ehci_free_itd(ehci_softc_t *sc, ehci_soft_itd_t *itd) 2856 { 2857 int s; 2858 2859 s = splusb(); 2860 LIST_INSERT_HEAD(&sc->sc_freeitds, itd, u.free_list); 2861 splx(s); 2862 } 2863 2864 /****************/ 2865 2866 /* 2867 * Close a reqular pipe. 2868 * Assumes that there are no pending transactions. 2869 */ 2870 Static void 2871 ehci_close_pipe(usbd_pipe_handle pipe, ehci_soft_qh_t *head) 2872 { 2873 struct ehci_pipe *epipe = (struct ehci_pipe *)pipe; 2874 ehci_softc_t *sc = pipe->device->bus->hci_private; 2875 ehci_soft_qh_t *sqh = epipe->sqh; 2876 int s; 2877 2878 s = splusb(); 2879 ehci_rem_qh(sc, sqh, head); 2880 splx(s); 2881 ehci_free_sqh(sc, epipe->sqh); 2882 } 2883 2884 /* 2885 * Abort a device request. 2886 * If this routine is called at splusb() it guarantees that the request 2887 * will be removed from the hardware scheduling and that the callback 2888 * for it will be called with USBD_CANCELLED status. 2889 * It's impossible to guarantee that the requested transfer will not 2890 * have happened since the hardware runs concurrently. 2891 * If the transaction has already happened we rely on the ordinary 2892 * interrupt processing to process it. 2893 * XXX This is most probably wrong. 2894 */ 2895 Static void 2896 ehci_abort_xfer(usbd_xfer_handle xfer, usbd_status status) 2897 { 2898 #define exfer EXFER(xfer) 2899 struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe; 2900 ehci_softc_t *sc = epipe->pipe.device->bus->hci_private; 2901 ehci_soft_qh_t *sqh = epipe->sqh; 2902 ehci_soft_qtd_t *sqtd; 2903 ehci_physaddr_t cur; 2904 u_int32_t qhstatus; 2905 int s; 2906 int hit; 2907 int wake; 2908 2909 DPRINTF(("ehci_abort_xfer: xfer=%p pipe=%p\n", xfer, epipe)); 2910 2911 if (sc->sc_dying) { 2912 /* If we're dying, just do the software part. */ 2913 s = splusb(); 2914 xfer->status = status; /* make software ignore it */ 2915 callout_stop(&xfer->timeout_handle); 2916 usb_transfer_complete(xfer); 2917 splx(s); 2918 return; 2919 } 2920 2921 if (xfer->device->bus->intr_context) 2922 panic("ehci_abort_xfer: not in process context"); 2923 2924 /* 2925 * If an abort is already in progress then just wait for it to 2926 * complete and return. 2927 */ 2928 if (xfer->hcflags & UXFER_ABORTING) { 2929 DPRINTFN(2, ("ehci_abort_xfer: already aborting\n")); 2930 #ifdef DIAGNOSTIC 2931 if (status == USBD_TIMEOUT) 2932 printf("ehci_abort_xfer: TIMEOUT while aborting\n"); 2933 #endif 2934 /* Override the status which might be USBD_TIMEOUT. */ 2935 xfer->status = status; 2936 DPRINTFN(2, ("ehci_abort_xfer: waiting for abort to finish\n")); 2937 xfer->hcflags |= UXFER_ABORTWAIT; 2938 while (xfer->hcflags & UXFER_ABORTING) 2939 tsleep(&xfer->hcflags, PZERO, "ehciaw", 0); 2940 return; 2941 } 2942 xfer->hcflags |= UXFER_ABORTING; 2943 2944 /* 2945 * Step 1: Make interrupt routine and hardware ignore xfer. 2946 */ 2947 s = splusb(); 2948 xfer->status = status; /* make software ignore it */ 2949 callout_stop(&xfer->timeout_handle); 2950 2951 usb_syncmem(&sqh->dma, 2952 sqh->offs + offsetof(ehci_qh_t, qh_qtd.qtd_status), 2953 sizeof(sqh->qh.qh_qtd.qtd_status), 2954 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 2955 qhstatus = sqh->qh.qh_qtd.qtd_status; 2956 sqh->qh.qh_qtd.qtd_status = qhstatus | htole32(EHCI_QTD_HALTED); 2957 usb_syncmem(&sqh->dma, 2958 sqh->offs + offsetof(ehci_qh_t, qh_qtd.qtd_status), 2959 sizeof(sqh->qh.qh_qtd.qtd_status), 2960 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2961 for (sqtd = exfer->sqtdstart; ; sqtd = sqtd->nextqtd) { 2962 usb_syncmem(&sqtd->dma, 2963 sqtd->offs + offsetof(ehci_qtd_t, qtd_status), 2964 sizeof(sqtd->qtd.qtd_status), 2965 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 2966 sqtd->qtd.qtd_status |= htole32(EHCI_QTD_HALTED); 2967 usb_syncmem(&sqtd->dma, 2968 sqtd->offs + offsetof(ehci_qtd_t, qtd_status), 2969 sizeof(sqtd->qtd.qtd_status), 2970 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 2971 if (sqtd == exfer->sqtdend) 2972 break; 2973 } 2974 splx(s); 2975 2976 /* 2977 * Step 2: Wait until we know hardware has finished any possible 2978 * use of the xfer. Also make sure the soft interrupt routine 2979 * has run. 2980 */ 2981 ehci_sync_hc(sc); 2982 s = splusb(); 2983 #ifdef USB_USE_SOFTINTR 2984 sc->sc_softwake = 1; 2985 #endif /* USB_USE_SOFTINTR */ 2986 usb_schedsoftintr(&sc->sc_bus); 2987 #ifdef USB_USE_SOFTINTR 2988 tsleep(&sc->sc_softwake, PZERO, "ehciab", 0); 2989 #endif /* USB_USE_SOFTINTR */ 2990 splx(s); 2991 2992 /* 2993 * Step 3: Remove any vestiges of the xfer from the hardware. 2994 * The complication here is that the hardware may have executed 2995 * beyond the xfer we're trying to abort. So as we're scanning 2996 * the TDs of this xfer we check if the hardware points to 2997 * any of them. 2998 */ 2999 s = splusb(); /* XXX why? */ 3000 3001 usb_syncmem(&sqh->dma, 3002 sqh->offs + offsetof(ehci_qh_t, qh_curqtd), 3003 sizeof(sqh->qh.qh_curqtd), 3004 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 3005 cur = EHCI_LINK_ADDR(le32toh(sqh->qh.qh_curqtd)); 3006 hit = 0; 3007 for (sqtd = exfer->sqtdstart; ; sqtd = sqtd->nextqtd) { 3008 hit |= cur == sqtd->physaddr; 3009 if (sqtd == exfer->sqtdend) 3010 break; 3011 } 3012 sqtd = sqtd->nextqtd; 3013 /* Zap curqtd register if hardware pointed inside the xfer. */ 3014 if (hit && sqtd != NULL) { 3015 DPRINTFN(1,("ehci_abort_xfer: cur=0x%08x\n", sqtd->physaddr)); 3016 sqh->qh.qh_curqtd = htole32(sqtd->physaddr); /* unlink qTDs */ 3017 usb_syncmem(&sqh->dma, 3018 sqh->offs + offsetof(ehci_qh_t, qh_curqtd), 3019 sizeof(sqh->qh.qh_curqtd), 3020 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3021 sqh->qh.qh_qtd.qtd_status = qhstatus; 3022 usb_syncmem(&sqh->dma, 3023 sqh->offs + offsetof(ehci_qh_t, qh_qtd.qtd_status), 3024 sizeof(sqh->qh.qh_qtd.qtd_status), 3025 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3026 } else { 3027 DPRINTFN(1,("ehci_abort_xfer: no hit\n")); 3028 } 3029 3030 /* 3031 * Step 4: Execute callback. 3032 */ 3033 #ifdef DIAGNOSTIC 3034 exfer->isdone = 1; 3035 #endif 3036 wake = xfer->hcflags & UXFER_ABORTWAIT; 3037 xfer->hcflags &= ~(UXFER_ABORTING | UXFER_ABORTWAIT); 3038 usb_transfer_complete(xfer); 3039 if (wake) 3040 wakeup(&xfer->hcflags); 3041 3042 splx(s); 3043 #undef exfer 3044 } 3045 3046 Static void 3047 ehci_abort_isoc_xfer(usbd_xfer_handle xfer, usbd_status status) 3048 { 3049 ehci_isoc_trans_t trans_status; 3050 struct ehci_pipe *epipe; 3051 struct ehci_xfer *exfer; 3052 ehci_softc_t *sc; 3053 struct ehci_soft_itd *itd; 3054 int s, i, wake; 3055 3056 epipe = (struct ehci_pipe *) xfer->pipe; 3057 exfer = EXFER(xfer); 3058 sc = epipe->pipe.device->bus->hci_private; 3059 3060 DPRINTF(("ehci_abort_isoc_xfer: xfer %p pipe %p\n", xfer, epipe)); 3061 3062 if (sc->sc_dying) { 3063 s = splusb(); 3064 xfer->status = status; 3065 callout_stop(&xfer->timeout_handle); 3066 usb_transfer_complete(xfer); 3067 splx(s); 3068 return; 3069 } 3070 3071 if (xfer->hcflags & UXFER_ABORTING) { 3072 DPRINTFN(2, ("ehci_abort_isoc_xfer: already aborting\n")); 3073 3074 #ifdef DIAGNOSTIC 3075 if (status == USBD_TIMEOUT) 3076 printf("ehci_abort_xfer: TIMEOUT while aborting\n"); 3077 #endif 3078 3079 xfer->status = status; 3080 DPRINTFN(2, ("ehci_abort_xfer: waiting for abort to finish\n")); 3081 xfer->hcflags |= UXFER_ABORTWAIT; 3082 while (xfer->hcflags & UXFER_ABORTING) 3083 tsleep(&xfer->hcflags, PZERO, "ehciiaw", 0); 3084 return; 3085 } 3086 xfer->hcflags |= UXFER_ABORTING; 3087 3088 xfer->status = status; 3089 callout_stop(&xfer->timeout_handle); 3090 3091 s = splusb(); 3092 for (itd = exfer->itdstart; itd != NULL; itd = itd->xfer_next) { 3093 usb_syncmem(&itd->dma, 3094 itd->offs + offsetof(ehci_itd_t, itd_ctl), 3095 sizeof(itd->itd.itd_ctl), 3096 BUS_DMASYNC_POSTWRITE | BUS_DMASYNC_POSTREAD); 3097 3098 for (i = 0; i < 8; i++) { 3099 trans_status = le32toh(itd->itd.itd_ctl[i]); 3100 trans_status &= ~EHCI_ITD_ACTIVE; 3101 itd->itd.itd_ctl[i] = htole32(trans_status); 3102 } 3103 3104 usb_syncmem(&itd->dma, 3105 itd->offs + offsetof(ehci_itd_t, itd_ctl), 3106 sizeof(itd->itd.itd_ctl), 3107 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3108 } 3109 splx(s); 3110 3111 s = splusb(); 3112 #ifdef USB_USE_SOFTINTR 3113 sc->sc_softwake = 1; 3114 #endif /* USB_USE_SOFTINTR */ 3115 usb_schedsoftintr(&sc->sc_bus); 3116 #ifdef USB_USE_SOFTINTR 3117 tsleep(&sc->sc_softwake, PZERO, "ehciab", 0); 3118 #endif /* USB_USE_SOFTINTR */ 3119 splx(s); 3120 3121 #ifdef DIAGNOSTIC 3122 exfer->isdone = 1; 3123 #endif 3124 wake = xfer->hcflags & UXFER_ABORTWAIT; 3125 xfer->hcflags &= ~(UXFER_ABORTING | UXFER_ABORTWAIT); 3126 usb_transfer_complete(xfer); 3127 if (wake) 3128 wakeup(&xfer->hcflags); 3129 3130 return; 3131 } 3132 3133 Static void 3134 ehci_timeout(void *addr) 3135 { 3136 struct ehci_xfer *exfer = addr; 3137 struct ehci_pipe *epipe = (struct ehci_pipe *)exfer->xfer.pipe; 3138 ehci_softc_t *sc = epipe->pipe.device->bus->hci_private; 3139 3140 DPRINTF(("ehci_timeout: exfer=%p\n", exfer)); 3141 #ifdef EHCI_DEBUG 3142 if (ehcidebug > 1) 3143 usbd_dump_pipe(exfer->xfer.pipe); 3144 #endif 3145 3146 if (sc->sc_dying) { 3147 ehci_abort_xfer(&exfer->xfer, USBD_TIMEOUT); 3148 return; 3149 } 3150 3151 /* Execute the abort in a process context. */ 3152 usb_init_task(&exfer->abort_task, ehci_timeout_task, addr); 3153 usb_add_task(exfer->xfer.pipe->device, &exfer->abort_task, 3154 USB_TASKQ_HC); 3155 } 3156 3157 Static void 3158 ehci_timeout_task(void *addr) 3159 { 3160 usbd_xfer_handle xfer = addr; 3161 int s; 3162 3163 DPRINTF(("ehci_timeout_task: xfer=%p\n", xfer)); 3164 3165 s = splusb(); 3166 ehci_abort_xfer(xfer, USBD_TIMEOUT); 3167 splx(s); 3168 } 3169 3170 /************************/ 3171 3172 Static usbd_status 3173 ehci_device_ctrl_transfer(usbd_xfer_handle xfer) 3174 { 3175 usbd_status err; 3176 3177 /* Insert last in queue. */ 3178 err = usb_insert_transfer(xfer); 3179 if (err) 3180 return (err); 3181 3182 /* Pipe isn't running, start first */ 3183 return (ehci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 3184 } 3185 3186 Static usbd_status 3187 ehci_device_ctrl_start(usbd_xfer_handle xfer) 3188 { 3189 ehci_softc_t *sc = xfer->pipe->device->bus->hci_private; 3190 usbd_status err; 3191 3192 if (sc->sc_dying) 3193 return (USBD_IOERROR); 3194 3195 #ifdef DIAGNOSTIC 3196 if (!(xfer->rqflags & URQ_REQUEST)) { 3197 /* XXX panic */ 3198 printf("ehci_device_ctrl_transfer: not a request\n"); 3199 return (USBD_INVAL); 3200 } 3201 #endif 3202 3203 err = ehci_device_request(xfer); 3204 if (err) 3205 return (err); 3206 3207 if (sc->sc_bus.use_polling) 3208 ehci_waitintr(sc, xfer); 3209 return (USBD_IN_PROGRESS); 3210 } 3211 3212 Static void 3213 ehci_device_ctrl_done(usbd_xfer_handle xfer) 3214 { 3215 struct ehci_xfer *ex = EXFER(xfer); 3216 ehci_softc_t *sc = xfer->pipe->device->bus->hci_private; 3217 struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe; 3218 usb_device_request_t *req = &xfer->request; 3219 int len = UGETW(req->wLength); 3220 int rd = req->bmRequestType & UT_READ; 3221 3222 DPRINTFN(10,("ehci_ctrl_done: xfer=%p\n", xfer)); 3223 3224 #ifdef DIAGNOSTIC 3225 if (!(xfer->rqflags & URQ_REQUEST)) { 3226 panic("ehci_ctrl_done: not a request"); 3227 } 3228 #endif 3229 3230 mutex_enter(&sc->sc_intrhead_lock); 3231 if (xfer->status != USBD_NOMEM && ehci_active_intr_list(ex)) { 3232 ehci_del_intr_list(sc, ex); /* remove from active list */ 3233 ehci_free_sqtd_chain(sc, ex->sqtdstart, NULL); 3234 usb_syncmem(&epipe->u.ctl.reqdma, 0, sizeof *req, 3235 BUS_DMASYNC_POSTWRITE); 3236 if (len) 3237 usb_syncmem(&xfer->dmabuf, 0, len, 3238 rd ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 3239 } 3240 mutex_exit(&sc->sc_intrhead_lock); 3241 3242 DPRINTFN(5, ("ehci_ctrl_done: length=%d\n", xfer->actlen)); 3243 } 3244 3245 /* Abort a device control request. */ 3246 Static void 3247 ehci_device_ctrl_abort(usbd_xfer_handle xfer) 3248 { 3249 DPRINTF(("ehci_device_ctrl_abort: xfer=%p\n", xfer)); 3250 ehci_abort_xfer(xfer, USBD_CANCELLED); 3251 } 3252 3253 /* Close a device control pipe. */ 3254 Static void 3255 ehci_device_ctrl_close(usbd_pipe_handle pipe) 3256 { 3257 ehci_softc_t *sc = pipe->device->bus->hci_private; 3258 /*struct ehci_pipe *epipe = (struct ehci_pipe *)pipe;*/ 3259 3260 DPRINTF(("ehci_device_ctrl_close: pipe=%p\n", pipe)); 3261 ehci_close_pipe(pipe, sc->sc_async_head); 3262 } 3263 3264 Static usbd_status 3265 ehci_device_request(usbd_xfer_handle xfer) 3266 { 3267 #define exfer EXFER(xfer) 3268 struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe; 3269 usb_device_request_t *req = &xfer->request; 3270 usbd_device_handle dev = epipe->pipe.device; 3271 ehci_softc_t *sc = dev->bus->hci_private; 3272 int addr = dev->address; 3273 ehci_soft_qtd_t *setup, *stat, *next; 3274 ehci_soft_qh_t *sqh; 3275 int isread; 3276 int len; 3277 usbd_status err; 3278 int s; 3279 3280 isread = req->bmRequestType & UT_READ; 3281 len = UGETW(req->wLength); 3282 3283 DPRINTFN(3,("ehci_device_request: type=0x%02x, request=0x%02x, " 3284 "wValue=0x%04x, wIndex=0x%04x len=%d, addr=%d, endpt=%d\n", 3285 req->bmRequestType, req->bRequest, UGETW(req->wValue), 3286 UGETW(req->wIndex), len, addr, 3287 epipe->pipe.endpoint->edesc->bEndpointAddress)); 3288 3289 setup = ehci_alloc_sqtd(sc); 3290 if (setup == NULL) { 3291 err = USBD_NOMEM; 3292 goto bad1; 3293 } 3294 stat = ehci_alloc_sqtd(sc); 3295 if (stat == NULL) { 3296 err = USBD_NOMEM; 3297 goto bad2; 3298 } 3299 3300 sqh = epipe->sqh; 3301 epipe->u.ctl.length = len; 3302 3303 /* Update device address and length since they may have changed 3304 during the setup of the control pipe in usbd_new_device(). */ 3305 /* XXX This only needs to be done once, but it's too early in open. */ 3306 /* XXXX Should not touch ED here! */ 3307 sqh->qh.qh_endp = 3308 (sqh->qh.qh_endp & htole32(~(EHCI_QH_ADDRMASK | EHCI_QH_MPLMASK))) | 3309 htole32( 3310 EHCI_QH_SET_ADDR(addr) | 3311 EHCI_QH_SET_MPL(UGETW(epipe->pipe.endpoint->edesc->wMaxPacketSize)) 3312 ); 3313 3314 /* Set up data transaction */ 3315 if (len != 0) { 3316 ehci_soft_qtd_t *end; 3317 3318 /* Start toggle at 1. */ 3319 epipe->nexttoggle = 1; 3320 err = ehci_alloc_sqtd_chain(epipe, sc, len, isread, xfer, 3321 &next, &end); 3322 if (err) 3323 goto bad3; 3324 end->qtd.qtd_status &= htole32(~EHCI_QTD_IOC); 3325 end->nextqtd = stat; 3326 end->qtd.qtd_next = 3327 end->qtd.qtd_altnext = htole32(stat->physaddr); 3328 usb_syncmem(&end->dma, end->offs, sizeof(end->qtd), 3329 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3330 } else { 3331 next = stat; 3332 } 3333 3334 memcpy(KERNADDR(&epipe->u.ctl.reqdma, 0), req, sizeof *req); 3335 usb_syncmem(&epipe->u.ctl.reqdma, 0, sizeof *req, BUS_DMASYNC_PREWRITE); 3336 3337 /* Clear toggle */ 3338 setup->qtd.qtd_status = htole32( 3339 EHCI_QTD_ACTIVE | 3340 EHCI_QTD_SET_PID(EHCI_QTD_PID_SETUP) | 3341 EHCI_QTD_SET_CERR(3) | 3342 EHCI_QTD_SET_TOGGLE(0) | 3343 EHCI_QTD_SET_BYTES(sizeof *req) 3344 ); 3345 setup->qtd.qtd_buffer[0] = htole32(DMAADDR(&epipe->u.ctl.reqdma, 0)); 3346 setup->qtd.qtd_buffer_hi[0] = 0; 3347 setup->nextqtd = next; 3348 setup->qtd.qtd_next = setup->qtd.qtd_altnext = htole32(next->physaddr); 3349 setup->xfer = xfer; 3350 setup->len = sizeof *req; 3351 usb_syncmem(&setup->dma, setup->offs, sizeof(setup->qtd), 3352 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3353 3354 stat->qtd.qtd_status = htole32( 3355 EHCI_QTD_ACTIVE | 3356 EHCI_QTD_SET_PID(isread ? EHCI_QTD_PID_OUT : EHCI_QTD_PID_IN) | 3357 EHCI_QTD_SET_CERR(3) | 3358 EHCI_QTD_SET_TOGGLE(1) | 3359 EHCI_QTD_IOC 3360 ); 3361 stat->qtd.qtd_buffer[0] = 0; /* XXX not needed? */ 3362 stat->qtd.qtd_buffer_hi[0] = 0; /* XXX not needed? */ 3363 stat->nextqtd = NULL; 3364 stat->qtd.qtd_next = stat->qtd.qtd_altnext = EHCI_NULL; 3365 stat->xfer = xfer; 3366 stat->len = 0; 3367 usb_syncmem(&stat->dma, stat->offs, sizeof(stat->qtd), 3368 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 3369 3370 #ifdef EHCI_DEBUG 3371 if (ehcidebug > 5) { 3372 DPRINTF(("ehci_device_request:\n")); 3373 ehci_dump_sqh(sqh); 3374 ehci_dump_sqtds(setup); 3375 } 3376 #endif 3377 3378 exfer->sqtdstart = setup; 3379 exfer->sqtdend = stat; 3380 #ifdef DIAGNOSTIC 3381 if (!exfer->isdone) { 3382 printf("ehci_device_request: not done, exfer=%p\n", exfer); 3383 } 3384 exfer->isdone = 0; 3385 #endif 3386 3387 /* Insert qTD in QH list. */ 3388 s = splusb(); 3389 ehci_set_qh_qtd(sqh, setup); /* also does usb_syncmem(sqh) */ 3390 if (xfer->timeout && !sc->sc_bus.use_polling) { 3391 callout_reset(&(xfer->timeout_handle), (mstohz(xfer->timeout)), 3392 (ehci_timeout), (xfer)); 3393 } 3394 mutex_enter(&sc->sc_intrhead_lock); 3395 ehci_add_intr_list(sc, exfer); 3396 mutex_exit(&sc->sc_intrhead_lock); 3397 xfer->status = USBD_IN_PROGRESS; 3398 splx(s); 3399 3400 #ifdef EHCI_DEBUG 3401 if (ehcidebug > 10) { 3402 DPRINTF(("ehci_device_request: status=%x\n", 3403 EOREAD4(sc, EHCI_USBSTS))); 3404 delay(10000); 3405 ehci_dump_regs(sc); 3406 ehci_dump_sqh(sc->sc_async_head); 3407 ehci_dump_sqh(sqh); 3408 ehci_dump_sqtds(setup); 3409 } 3410 #endif 3411 3412 return (USBD_NORMAL_COMPLETION); 3413 3414 bad3: 3415 ehci_free_sqtd(sc, stat); 3416 bad2: 3417 ehci_free_sqtd(sc, setup); 3418 bad1: 3419 DPRINTFN(-1,("ehci_device_request: no memory\n")); 3420 xfer->status = err; 3421 usb_transfer_complete(xfer); 3422 return (err); 3423 #undef exfer 3424 } 3425 3426 /* 3427 * Some EHCI chips from VIA seem to trigger interrupts before writing back the 3428 * qTD status, or miss signalling occasionally under heavy load. If the host 3429 * machine is too fast, we we can miss transaction completion - when we scan 3430 * the active list the transaction still seems to be active. This generally 3431 * exhibits itself as a umass stall that never recovers. 3432 * 3433 * We work around this behaviour by setting up this callback after any softintr 3434 * that completes with transactions still pending, giving us another chance to 3435 * check for completion after the writeback has taken place. 3436 */ 3437 Static void 3438 ehci_intrlist_timeout(void *arg) 3439 { 3440 ehci_softc_t *sc = arg; 3441 int s = splusb(); 3442 3443 DPRINTF(("ehci_intrlist_timeout\n")); 3444 usb_schedsoftintr(&sc->sc_bus); 3445 3446 splx(s); 3447 } 3448 3449 /************************/ 3450 3451 Static usbd_status 3452 ehci_device_bulk_transfer(usbd_xfer_handle xfer) 3453 { 3454 usbd_status err; 3455 3456 /* Insert last in queue. */ 3457 err = usb_insert_transfer(xfer); 3458 if (err) 3459 return (err); 3460 3461 /* Pipe isn't running, start first */ 3462 return (ehci_device_bulk_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 3463 } 3464 3465 Static usbd_status 3466 ehci_device_bulk_start(usbd_xfer_handle xfer) 3467 { 3468 #define exfer EXFER(xfer) 3469 struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe; 3470 usbd_device_handle dev = epipe->pipe.device; 3471 ehci_softc_t *sc = dev->bus->hci_private; 3472 ehci_soft_qtd_t *data, *dataend; 3473 ehci_soft_qh_t *sqh; 3474 usbd_status err; 3475 int len, isread, endpt; 3476 int s; 3477 3478 DPRINTFN(2, ("ehci_device_bulk_start: xfer=%p len=%d flags=%d\n", 3479 xfer, xfer->length, xfer->flags)); 3480 3481 if (sc->sc_dying) 3482 return (USBD_IOERROR); 3483 3484 #ifdef DIAGNOSTIC 3485 if (xfer->rqflags & URQ_REQUEST) 3486 panic("ehci_device_bulk_start: a request"); 3487 #endif 3488 3489 len = xfer->length; 3490 endpt = epipe->pipe.endpoint->edesc->bEndpointAddress; 3491 isread = UE_GET_DIR(endpt) == UE_DIR_IN; 3492 sqh = epipe->sqh; 3493 3494 epipe->u.bulk.length = len; 3495 3496 err = ehci_alloc_sqtd_chain(epipe, sc, len, isread, xfer, &data, 3497 &dataend); 3498 if (err) { 3499 DPRINTFN(-1,("ehci_device_bulk_transfer: no memory\n")); 3500 xfer->status = err; 3501 usb_transfer_complete(xfer); 3502 return (err); 3503 } 3504 3505 #ifdef EHCI_DEBUG 3506 if (ehcidebug > 5) { 3507 DPRINTF(("ehci_device_bulk_start: data(1)\n")); 3508 ehci_dump_sqh(sqh); 3509 ehci_dump_sqtds(data); 3510 } 3511 #endif 3512 3513 /* Set up interrupt info. */ 3514 exfer->sqtdstart = data; 3515 exfer->sqtdend = dataend; 3516 #ifdef DIAGNOSTIC 3517 if (!exfer->isdone) { 3518 printf("ehci_device_bulk_start: not done, ex=%p\n", exfer); 3519 } 3520 exfer->isdone = 0; 3521 #endif 3522 3523 s = splusb(); 3524 ehci_set_qh_qtd(sqh, data); /* also does usb_syncmem(sqh) */ 3525 if (xfer->timeout && !sc->sc_bus.use_polling) { 3526 callout_reset(&(xfer->timeout_handle), (mstohz(xfer->timeout)), 3527 (ehci_timeout), (xfer)); 3528 } 3529 mutex_enter(&sc->sc_intrhead_lock); 3530 ehci_add_intr_list(sc, exfer); 3531 mutex_exit(&sc->sc_intrhead_lock); 3532 xfer->status = USBD_IN_PROGRESS; 3533 splx(s); 3534 3535 #ifdef EHCI_DEBUG 3536 if (ehcidebug > 10) { 3537 DPRINTF(("ehci_device_bulk_start: data(2)\n")); 3538 delay(10000); 3539 DPRINTF(("ehci_device_bulk_start: data(3)\n")); 3540 ehci_dump_regs(sc); 3541 #if 0 3542 printf("async_head:\n"); 3543 ehci_dump_sqh(sc->sc_async_head); 3544 #endif 3545 printf("sqh:\n"); 3546 ehci_dump_sqh(sqh); 3547 ehci_dump_sqtds(data); 3548 } 3549 #endif 3550 3551 if (sc->sc_bus.use_polling) 3552 ehci_waitintr(sc, xfer); 3553 3554 return (USBD_IN_PROGRESS); 3555 #undef exfer 3556 } 3557 3558 Static void 3559 ehci_device_bulk_abort(usbd_xfer_handle xfer) 3560 { 3561 DPRINTF(("ehci_device_bulk_abort: xfer=%p\n", xfer)); 3562 ehci_abort_xfer(xfer, USBD_CANCELLED); 3563 } 3564 3565 /* 3566 * Close a device bulk pipe. 3567 */ 3568 Static void 3569 ehci_device_bulk_close(usbd_pipe_handle pipe) 3570 { 3571 ehci_softc_t *sc = pipe->device->bus->hci_private; 3572 3573 DPRINTF(("ehci_device_bulk_close: pipe=%p\n", pipe)); 3574 ehci_close_pipe(pipe, sc->sc_async_head); 3575 } 3576 3577 Static void 3578 ehci_device_bulk_done(usbd_xfer_handle xfer) 3579 { 3580 struct ehci_xfer *ex = EXFER(xfer); 3581 ehci_softc_t *sc = xfer->pipe->device->bus->hci_private; 3582 struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe; 3583 int endpt = epipe->pipe.endpoint->edesc->bEndpointAddress; 3584 int rd = UE_GET_DIR(endpt) == UE_DIR_IN; 3585 3586 DPRINTFN(10,("ehci_bulk_done: xfer=%p, actlen=%d\n", 3587 xfer, xfer->actlen)); 3588 3589 mutex_enter(&sc->sc_intrhead_lock); 3590 if (xfer->status != USBD_NOMEM && ehci_active_intr_list(ex)) { 3591 ehci_del_intr_list(sc, ex); /* remove from active list */ 3592 ehci_free_sqtd_chain(sc, ex->sqtdstart, NULL); 3593 usb_syncmem(&xfer->dmabuf, 0, xfer->length, 3594 rd ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 3595 } 3596 mutex_exit(&sc->sc_intrhead_lock); 3597 3598 DPRINTFN(5, ("ehci_bulk_done: length=%d\n", xfer->actlen)); 3599 } 3600 3601 /************************/ 3602 3603 Static usbd_status 3604 ehci_device_setintr(ehci_softc_t *sc, ehci_soft_qh_t *sqh, int ival) 3605 { 3606 struct ehci_soft_islot *isp; 3607 int islot, lev; 3608 3609 /* Find a poll rate that is large enough. */ 3610 for (lev = EHCI_IPOLLRATES - 1; lev > 0; lev--) 3611 if (EHCI_ILEV_IVAL(lev) <= ival) 3612 break; 3613 3614 /* Pick an interrupt slot at the right level. */ 3615 /* XXX could do better than picking at random */ 3616 sc->sc_rand = (sc->sc_rand + 191) % sc->sc_flsize; 3617 islot = EHCI_IQHIDX(lev, sc->sc_rand); 3618 3619 sqh->islot = islot; 3620 isp = &sc->sc_islots[islot]; 3621 ehci_add_qh(sqh, isp->sqh); 3622 3623 return (USBD_NORMAL_COMPLETION); 3624 } 3625 3626 Static usbd_status 3627 ehci_device_intr_transfer(usbd_xfer_handle xfer) 3628 { 3629 usbd_status err; 3630 3631 /* Insert last in queue. */ 3632 err = usb_insert_transfer(xfer); 3633 if (err) 3634 return (err); 3635 3636 /* 3637 * Pipe isn't running (otherwise err would be USBD_INPROG), 3638 * so start it first. 3639 */ 3640 return (ehci_device_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue))); 3641 } 3642 3643 Static usbd_status 3644 ehci_device_intr_start(usbd_xfer_handle xfer) 3645 { 3646 #define exfer EXFER(xfer) 3647 struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe; 3648 usbd_device_handle dev = xfer->pipe->device; 3649 ehci_softc_t *sc = dev->bus->hci_private; 3650 ehci_soft_qtd_t *data, *dataend; 3651 ehci_soft_qh_t *sqh; 3652 usbd_status err; 3653 int len, isread, endpt; 3654 int s; 3655 3656 DPRINTFN(2, ("ehci_device_intr_start: xfer=%p len=%d flags=%d\n", 3657 xfer, xfer->length, xfer->flags)); 3658 3659 if (sc->sc_dying) 3660 return (USBD_IOERROR); 3661 3662 #ifdef DIAGNOSTIC 3663 if (xfer->rqflags & URQ_REQUEST) 3664 panic("ehci_device_intr_start: a request"); 3665 #endif 3666 3667 len = xfer->length; 3668 endpt = epipe->pipe.endpoint->edesc->bEndpointAddress; 3669 isread = UE_GET_DIR(endpt) == UE_DIR_IN; 3670 sqh = epipe->sqh; 3671 3672 epipe->u.intr.length = len; 3673 3674 err = ehci_alloc_sqtd_chain(epipe, sc, len, isread, xfer, &data, 3675 &dataend); 3676 if (err) { 3677 DPRINTFN(-1, ("ehci_device_intr_start: no memory\n")); 3678 xfer->status = err; 3679 usb_transfer_complete(xfer); 3680 return (err); 3681 } 3682 3683 #ifdef EHCI_DEBUG 3684 if (ehcidebug > 5) { 3685 DPRINTF(("ehci_device_intr_start: data(1)\n")); 3686 ehci_dump_sqh(sqh); 3687 ehci_dump_sqtds(data); 3688 } 3689 #endif 3690 3691 /* Set up interrupt info. */ 3692 exfer->sqtdstart = data; 3693 exfer->sqtdend = dataend; 3694 #ifdef DIAGNOSTIC 3695 if (!exfer->isdone) { 3696 printf("ehci_device_intr_start: not done, ex=%p\n", exfer); 3697 } 3698 exfer->isdone = 0; 3699 #endif 3700 3701 s = splusb(); 3702 ehci_set_qh_qtd(sqh, data); /* also does usb_syncmem(sqh) */ 3703 if (xfer->timeout && !sc->sc_bus.use_polling) { 3704 callout_reset(&(xfer->timeout_handle), (mstohz(xfer->timeout)), 3705 (ehci_timeout), (xfer)); 3706 } 3707 mutex_enter(&sc->sc_intrhead_lock); 3708 ehci_add_intr_list(sc, exfer); 3709 mutex_exit(&sc->sc_intrhead_lock); 3710 xfer->status = USBD_IN_PROGRESS; 3711 splx(s); 3712 3713 #ifdef EHCI_DEBUG 3714 if (ehcidebug > 10) { 3715 DPRINTF(("ehci_device_intr_start: data(2)\n")); 3716 delay(10000); 3717 DPRINTF(("ehci_device_intr_start: data(3)\n")); 3718 ehci_dump_regs(sc); 3719 printf("sqh:\n"); 3720 ehci_dump_sqh(sqh); 3721 ehci_dump_sqtds(data); 3722 } 3723 #endif 3724 3725 if (sc->sc_bus.use_polling) 3726 ehci_waitintr(sc, xfer); 3727 3728 return (USBD_IN_PROGRESS); 3729 #undef exfer 3730 } 3731 3732 Static void 3733 ehci_device_intr_abort(usbd_xfer_handle xfer) 3734 { 3735 DPRINTFN(1, ("ehci_device_intr_abort: xfer=%p\n", xfer)); 3736 if (xfer->pipe->intrxfer == xfer) { 3737 DPRINTFN(1, ("echi_device_intr_abort: remove\n")); 3738 xfer->pipe->intrxfer = NULL; 3739 } 3740 /* 3741 * XXX - abort_xfer uses ehci_sync_hc, which syncs via the advance 3742 * async doorbell. That's dependant on the async list, wheras 3743 * intr xfers are periodic, should not use this? 3744 */ 3745 ehci_abort_xfer(xfer, USBD_CANCELLED); 3746 } 3747 3748 Static void 3749 ehci_device_intr_close(usbd_pipe_handle pipe) 3750 { 3751 ehci_softc_t *sc = pipe->device->bus->hci_private; 3752 struct ehci_pipe *epipe = (struct ehci_pipe *)pipe; 3753 struct ehci_soft_islot *isp; 3754 3755 isp = &sc->sc_islots[epipe->sqh->islot]; 3756 ehci_close_pipe(pipe, isp->sqh); 3757 } 3758 3759 Static void 3760 ehci_device_intr_done(usbd_xfer_handle xfer) 3761 { 3762 #define exfer EXFER(xfer) 3763 struct ehci_xfer *ex = EXFER(xfer); 3764 ehci_softc_t *sc = xfer->pipe->device->bus->hci_private; 3765 struct ehci_pipe *epipe = (struct ehci_pipe *)xfer->pipe; 3766 ehci_soft_qtd_t *data, *dataend; 3767 ehci_soft_qh_t *sqh; 3768 usbd_status err; 3769 int len, isread, endpt, s; 3770 3771 DPRINTFN(10, ("ehci_device_intr_done: xfer=%p, actlen=%d\n", 3772 xfer, xfer->actlen)); 3773 3774 mutex_enter(&sc->sc_intrhead_lock); 3775 if (xfer->pipe->repeat) { 3776 ehci_free_sqtd_chain(sc, ex->sqtdstart, NULL); 3777 3778 len = epipe->u.intr.length; 3779 xfer->length = len; 3780 endpt = epipe->pipe.endpoint->edesc->bEndpointAddress; 3781 isread = UE_GET_DIR(endpt) == UE_DIR_IN; 3782 usb_syncmem(&xfer->dmabuf, 0, len, 3783 isread ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 3784 sqh = epipe->sqh; 3785 3786 err = ehci_alloc_sqtd_chain(epipe, sc, len, isread, xfer, 3787 &data, &dataend); 3788 if (err) { 3789 DPRINTFN(-1, ("ehci_device_intr_done: no memory\n")); 3790 xfer->status = err; 3791 mutex_exit(&sc->sc_intrhead_lock); 3792 return; 3793 } 3794 3795 /* Set up interrupt info. */ 3796 exfer->sqtdstart = data; 3797 exfer->sqtdend = dataend; 3798 #ifdef DIAGNOSTIC 3799 if (!exfer->isdone) { 3800 printf("ehci_device_intr_done: not done, ex=%p\n", 3801 exfer); 3802 } 3803 exfer->isdone = 0; 3804 #endif 3805 3806 s = splusb(); 3807 ehci_set_qh_qtd(sqh, data); /* also does usb_syncmem(sqh) */ 3808 if (xfer->timeout && !sc->sc_bus.use_polling) { 3809 callout_reset(&(xfer->timeout_handle), 3810 (mstohz(xfer->timeout)), (ehci_timeout), (xfer)); 3811 } 3812 splx(s); 3813 3814 xfer->status = USBD_IN_PROGRESS; 3815 } else if (xfer->status != USBD_NOMEM && ehci_active_intr_list(ex)) { 3816 ehci_del_intr_list(sc, ex); /* remove from active list */ 3817 ehci_free_sqtd_chain(sc, ex->sqtdstart, NULL); 3818 endpt = epipe->pipe.endpoint->edesc->bEndpointAddress; 3819 isread = UE_GET_DIR(endpt) == UE_DIR_IN; 3820 usb_syncmem(&xfer->dmabuf, 0, xfer->length, 3821 isread ? BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE); 3822 } 3823 mutex_exit(&sc->sc_intrhead_lock); 3824 #undef exfer 3825 } 3826 3827 /************************/ 3828 3829 Static usbd_status 3830 ehci_device_isoc_transfer(usbd_xfer_handle xfer) 3831 { 3832 usbd_status err; 3833 3834 err = usb_insert_transfer(xfer); 3835 if (err && err != USBD_IN_PROGRESS) 3836 return err; 3837 3838 return ehci_device_isoc_start(xfer); 3839 } 3840 3841 Static usbd_status 3842 ehci_device_isoc_start(usbd_xfer_handle xfer) 3843 { 3844 struct ehci_pipe *epipe; 3845 usbd_device_handle dev; 3846 ehci_softc_t *sc; 3847 struct ehci_xfer *exfer; 3848 ehci_soft_itd_t *itd, *prev, *start, *stop; 3849 usb_dma_t *dma_buf; 3850 int i, j, k, frames, uframes, ufrperframe; 3851 int s, trans_count, offs, total_length; 3852 int frindex; 3853 3854 start = NULL; 3855 prev = NULL; 3856 itd = NULL; 3857 trans_count = 0; 3858 total_length = 0; 3859 exfer = (struct ehci_xfer *) xfer; 3860 sc = xfer->pipe->device->bus->hci_private; 3861 dev = xfer->pipe->device; 3862 epipe = (struct ehci_pipe *)xfer->pipe; 3863 3864 /* 3865 * To allow continuous transfers, above we start all transfers 3866 * immediately. However, we're still going to get usbd_start_next call 3867 * this when another xfer completes. So, check if this is already 3868 * in progress or not 3869 */ 3870 3871 if (exfer->itdstart != NULL) 3872 return USBD_IN_PROGRESS; 3873 3874 DPRINTFN(2, ("ehci_device_isoc_start: xfer %p len %d flags %d\n", 3875 xfer, xfer->length, xfer->flags)); 3876 3877 if (sc->sc_dying) 3878 return USBD_IOERROR; 3879 3880 /* 3881 * To avoid complication, don't allow a request right now that'll span 3882 * the entire frame table. To within 4 frames, to allow some leeway 3883 * on either side of where the hc currently is. 3884 */ 3885 if ((1 << (epipe->pipe.endpoint->edesc->bInterval)) * 3886 xfer->nframes >= (sc->sc_flsize - 4) * 8) { 3887 printf("ehci: isoc descriptor requested that spans the entire frametable, too many frames\n"); 3888 return USBD_INVAL; 3889 } 3890 3891 #ifdef DIAGNOSTIC 3892 if (xfer->rqflags & URQ_REQUEST) 3893 panic("ehci_device_isoc_start: request\n"); 3894 3895 if (!exfer->isdone) 3896 printf("ehci_device_isoc_start: not done, ex = %p\n", exfer); 3897 exfer->isdone = 0; 3898 #endif 3899 3900 /* 3901 * Step 1: Allocate and initialize itds, how many do we need? 3902 * One per transfer if interval >= 8 microframes, fewer if we use 3903 * multiple microframes per frame. 3904 */ 3905 3906 i = epipe->pipe.endpoint->edesc->bInterval; 3907 if (i > 16 || i == 0) { 3908 /* Spec page 271 says intervals > 16 are invalid */ 3909 DPRINTF(("ehci_device_isoc_start: bInvertal %d invalid\n", i)); 3910 return USBD_INVAL; 3911 } 3912 3913 ufrperframe = max(1, USB_UFRAMES_PER_FRAME / (1 << (i - 1))); 3914 frames = (xfer->nframes + (ufrperframe - 1)) / ufrperframe; 3915 uframes = USB_UFRAMES_PER_FRAME / ufrperframe; 3916 3917 if (frames == 0) { 3918 DPRINTF(("ehci_device_isoc_start: frames == 0\n")); 3919 return USBD_INVAL; 3920 } 3921 3922 dma_buf = &xfer->dmabuf; 3923 offs = 0; 3924 3925 for (i = 0; i < frames; i++) { 3926 int froffs = offs; 3927 itd = ehci_alloc_itd(sc); 3928 3929 if (prev != NULL) { 3930 prev->itd.itd_next = 3931 htole32(itd->physaddr | EHCI_LINK_ITD); 3932 usb_syncmem(&itd->dma, 3933 itd->offs + offsetof(ehci_itd_t, itd_next), 3934 sizeof(itd->itd.itd_next), BUS_DMASYNC_POSTWRITE); 3935 3936 prev->xfer_next = itd; 3937 } else { 3938 start = itd; 3939 } 3940 3941 /* 3942 * Step 1.5, initialize uframes 3943 */ 3944 for (j = 0; j < EHCI_ITD_NUFRAMES; j += uframes) { 3945 /* Calculate which page in the list this starts in */ 3946 int addr = DMAADDR(dma_buf, froffs); 3947 addr = EHCI_PAGE_OFFSET(addr); 3948 addr += (offs - froffs); 3949 addr = EHCI_PAGE(addr); 3950 addr /= EHCI_PAGE_SIZE; 3951 3952 /* This gets the initial offset into the first page, 3953 * looks how far further along the current uframe 3954 * offset is. Works out how many pages that is. 3955 */ 3956 3957 itd->itd.itd_ctl[j] = htole32 ( EHCI_ITD_ACTIVE | 3958 EHCI_ITD_SET_LEN(xfer->frlengths[trans_count]) | 3959 EHCI_ITD_SET_PG(addr) | 3960 EHCI_ITD_SET_OFFS(EHCI_PAGE_OFFSET(DMAADDR(dma_buf,offs)))); 3961 3962 total_length += xfer->frlengths[trans_count]; 3963 offs += xfer->frlengths[trans_count]; 3964 trans_count++; 3965 3966 if (trans_count >= xfer->nframes) { /*Set IOC*/ 3967 itd->itd.itd_ctl[j] |= htole32(EHCI_ITD_IOC); 3968 break; 3969 } 3970 } 3971 3972 /* Step 1.75, set buffer pointers. To simplify matters, all 3973 * pointers are filled out for the next 7 hardware pages in 3974 * the dma block, so no need to worry what pages to cover 3975 * and what to not. 3976 */ 3977 3978 for (j = 0; j < EHCI_ITD_NBUFFERS; j++) { 3979 /* 3980 * Don't try to lookup a page that's past the end 3981 * of buffer 3982 */ 3983 int page_offs = EHCI_PAGE(froffs + (EHCI_PAGE_SIZE * j)); 3984 if (page_offs >= dma_buf->block->size) 3985 break; 3986 3987 long long page = DMAADDR(dma_buf, page_offs); 3988 page = EHCI_PAGE(page); 3989 itd->itd.itd_bufr[j] = 3990 htole32(EHCI_ITD_SET_BPTR(page)); 3991 itd->itd.itd_bufr_hi[j] = 3992 htole32(page >> 32); 3993 } 3994 3995 /* 3996 * Other special values 3997 */ 3998 3999 k = epipe->pipe.endpoint->edesc->bEndpointAddress; 4000 itd->itd.itd_bufr[0] |= htole32(EHCI_ITD_SET_EP(UE_GET_ADDR(k)) | 4001 EHCI_ITD_SET_DADDR(epipe->pipe.device->address)); 4002 4003 k = (UE_GET_DIR(epipe->pipe.endpoint->edesc->bEndpointAddress)) 4004 ? 1 : 0; 4005 j = UGETW(epipe->pipe.endpoint->edesc->wMaxPacketSize); 4006 itd->itd.itd_bufr[1] |= htole32(EHCI_ITD_SET_DIR(k) | 4007 EHCI_ITD_SET_MAXPKT(UE_GET_SIZE(j))); 4008 4009 /* FIXME: handle invalid trans */ 4010 itd->itd.itd_bufr[2] |= 4011 htole32(EHCI_ITD_SET_MULTI(UE_GET_TRANS(j)+1)); 4012 4013 usb_syncmem(&itd->dma, 4014 itd->offs + offsetof(ehci_itd_t, itd_next), 4015 sizeof(ehci_itd_t), 4016 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 4017 4018 prev = itd; 4019 } /* End of frame */ 4020 4021 stop = itd; 4022 stop->xfer_next = NULL; 4023 exfer->isoc_len = total_length; 4024 4025 usb_syncmem(&exfer->xfer.dmabuf, 0, total_length, 4026 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 4027 4028 /* 4029 * Part 2: Transfer descriptors have now been set up, now they must 4030 * be scheduled into the period frame list. Erk. Not wanting to 4031 * complicate matters, transfer is denied if the transfer spans 4032 * more than the period frame list. 4033 */ 4034 4035 s = splusb(); 4036 4037 /* Start inserting frames */ 4038 if (epipe->u.isoc.cur_xfers > 0) { 4039 frindex = epipe->u.isoc.next_frame; 4040 } else { 4041 frindex = EOREAD4(sc, EHCI_FRINDEX); 4042 frindex = frindex >> 3; /* Erase microframe index */ 4043 frindex += 2; 4044 } 4045 4046 if (frindex >= sc->sc_flsize) 4047 frindex &= (sc->sc_flsize - 1); 4048 4049 /* What's the frame interval? */ 4050 i = (1 << (epipe->pipe.endpoint->edesc->bInterval - 1)); 4051 if (i / USB_UFRAMES_PER_FRAME == 0) 4052 i = 1; 4053 else 4054 i /= USB_UFRAMES_PER_FRAME; 4055 4056 itd = start; 4057 for (j = 0; j < frames; j++) { 4058 if (itd == NULL) 4059 panic("ehci: unexpectedly ran out of isoc itds, isoc_start\n"); 4060 4061 itd->itd.itd_next = sc->sc_flist[frindex]; 4062 if (itd->itd.itd_next == 0) 4063 /* FIXME: frindex table gets initialized to NULL 4064 * or EHCI_NULL? */ 4065 itd->itd.itd_next = EHCI_NULL; 4066 4067 usb_syncmem(&itd->dma, 4068 itd->offs + offsetof(ehci_itd_t, itd_next), 4069 sizeof(itd->itd.itd_next), 4070 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 4071 4072 sc->sc_flist[frindex] = htole32(EHCI_LINK_ITD | itd->physaddr); 4073 4074 usb_syncmem(&sc->sc_fldma, 4075 sizeof(ehci_link_t) * frindex, 4076 sizeof(ehci_link_t), 4077 BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD); 4078 4079 itd->u.frame_list.next = sc->sc_softitds[frindex]; 4080 sc->sc_softitds[frindex] = itd; 4081 if (itd->u.frame_list.next != NULL) 4082 itd->u.frame_list.next->u.frame_list.prev = itd; 4083 itd->slot = frindex; 4084 itd->u.frame_list.prev = NULL; 4085 4086 frindex += i; 4087 if (frindex >= sc->sc_flsize) 4088 frindex -= sc->sc_flsize; 4089 4090 itd = itd->xfer_next; 4091 } 4092 4093 epipe->u.isoc.cur_xfers++; 4094 epipe->u.isoc.next_frame = frindex; 4095 4096 exfer->itdstart = start; 4097 exfer->itdend = stop; 4098 exfer->sqtdstart = NULL; 4099 exfer->sqtdstart = NULL; 4100 4101 mutex_enter(&sc->sc_intrhead_lock); 4102 ehci_add_intr_list(sc, exfer); 4103 mutex_exit(&sc->sc_intrhead_lock); 4104 xfer->status = USBD_IN_PROGRESS; 4105 xfer->done = 0; 4106 splx(s); 4107 4108 if (sc->sc_bus.use_polling) { 4109 printf("Starting ehci isoc xfer with polling. Bad idea?\n"); 4110 ehci_waitintr(sc, xfer); 4111 } 4112 4113 return USBD_IN_PROGRESS; 4114 } 4115 4116 Static void 4117 ehci_device_isoc_abort(usbd_xfer_handle xfer) 4118 { 4119 DPRINTFN(1, ("ehci_device_isoc_abort: xfer = %p\n", xfer)); 4120 ehci_abort_isoc_xfer(xfer, USBD_CANCELLED); 4121 } 4122 4123 Static void 4124 ehci_device_isoc_close(usbd_pipe_handle pipe) 4125 { 4126 DPRINTFN(1, ("ehci_device_isoc_close: nothing in the pipe to free?\n")); 4127 } 4128 4129 Static void 4130 ehci_device_isoc_done(usbd_xfer_handle xfer) 4131 { 4132 struct ehci_xfer *exfer; 4133 ehci_softc_t *sc; 4134 struct ehci_pipe *epipe; 4135 int s; 4136 4137 exfer = EXFER(xfer); 4138 sc = xfer->pipe->device->bus->hci_private; 4139 epipe = (struct ehci_pipe *) xfer->pipe; 4140 4141 s = splusb(); 4142 epipe->u.isoc.cur_xfers--; 4143 mutex_enter(&sc->sc_intrhead_lock); 4144 if (xfer->status != USBD_NOMEM && ehci_active_intr_list(exfer)) { 4145 ehci_del_intr_list(sc, exfer); 4146 ehci_rem_free_itd_chain(sc, exfer); 4147 } 4148 mutex_exit(&sc->sc_intrhead_lock); 4149 splx(s); 4150 4151 usb_syncmem(&xfer->dmabuf, 0, xfer->length, BUS_DMASYNC_POSTWRITE | 4152 BUS_DMASYNC_POSTREAD); 4153 4154 } 4155