1 /* $NetBSD: sysmon_envsys.c,v 1.147 2020/06/11 02:39:31 thorpej Exp $ */ 2 3 /*- 4 * Copyright (c) 2007, 2008 Juan Romero Pardines. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28 /*- 29 * Copyright (c) 2000 Zembu Labs, Inc. 30 * All rights reserved. 31 * 32 * Author: Jason R. Thorpe <thorpej@zembu.com> 33 * 34 * Redistribution and use in source and binary forms, with or without 35 * modification, are permitted provided that the following conditions 36 * are met: 37 * 1. Redistributions of source code must retain the above copyright 38 * notice, this list of conditions and the following disclaimer. 39 * 2. Redistributions in binary form must reproduce the above copyright 40 * notice, this list of conditions and the following disclaimer in the 41 * documentation and/or other materials provided with the distribution. 42 * 3. All advertising materials mentioning features or use of this software 43 * must display the following acknowledgement: 44 * This product includes software developed by Zembu Labs, Inc. 45 * 4. Neither the name of Zembu Labs nor the names of its employees may 46 * be used to endorse or promote products derived from this software 47 * without specific prior written permission. 48 * 49 * THIS SOFTWARE IS PROVIDED BY ZEMBU LABS, INC. ``AS IS'' AND ANY EXPRESS 50 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WAR- 51 * RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DIS- 52 * CLAIMED. IN NO EVENT SHALL ZEMBU LABS BE LIABLE FOR ANY DIRECT, INDIRECT, 53 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 54 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 55 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 56 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 57 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 58 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 59 */ 60 61 /* 62 * Environmental sensor framework for sysmon, exported to userland 63 * with proplib(3). 64 */ 65 66 #include <sys/cdefs.h> 67 __KERNEL_RCSID(0, "$NetBSD: sysmon_envsys.c,v 1.147 2020/06/11 02:39:31 thorpej Exp $"); 68 69 #include <sys/param.h> 70 #include <sys/types.h> 71 #include <sys/conf.h> 72 #include <sys/errno.h> 73 #include <sys/fcntl.h> 74 #include <sys/kernel.h> 75 #include <sys/systm.h> 76 #include <sys/proc.h> 77 #include <sys/mutex.h> 78 #include <sys/kmem.h> 79 #include <sys/rndsource.h> 80 #include <sys/module.h> 81 #include <sys/once.h> 82 83 #include <dev/sysmon/sysmonvar.h> 84 #include <dev/sysmon/sysmon_envsysvar.h> 85 #include <dev/sysmon/sysmon_taskq.h> 86 87 kmutex_t sme_global_mtx; 88 89 prop_dictionary_t sme_propd; 90 91 struct sysmon_envsys_lh sysmon_envsys_list; 92 93 static uint32_t sysmon_envsys_next_sensor_index; 94 static struct sysmon_envsys *sysmon_envsys_find_40(u_int); 95 96 static void sysmon_envsys_destroy_plist(prop_array_t); 97 static void sme_remove_userprops(void); 98 static int sme_add_property_dictionary(struct sysmon_envsys *, prop_array_t, 99 prop_dictionary_t); 100 static sme_event_drv_t * sme_add_sensor_dictionary(struct sysmon_envsys *, 101 prop_array_t, prop_dictionary_t, envsys_data_t *); 102 static void sme_initial_refresh(void *); 103 static uint32_t sme_get_max_value(struct sysmon_envsys *, 104 bool (*)(const envsys_data_t*), bool); 105 106 MODULE(MODULE_CLASS_DRIVER, sysmon_envsys, "sysmon,sysmon_taskq,sysmon_power"); 107 108 static struct sysmon_opvec sysmon_envsys_opvec = { 109 sysmonopen_envsys, sysmonclose_envsys, sysmonioctl_envsys, 110 NULL, NULL, NULL 111 }; 112 113 ONCE_DECL(once_envsys); 114 115 static int 116 sme_preinit(void) 117 { 118 119 LIST_INIT(&sysmon_envsys_list); 120 mutex_init(&sme_global_mtx, MUTEX_DEFAULT, IPL_NONE); 121 sme_propd = prop_dictionary_create(); 122 123 return 0; 124 } 125 126 /* 127 * sysmon_envsys_init: 128 * 129 * + Initialize global mutex, dictionary and the linked list. 130 */ 131 int 132 sysmon_envsys_init(void) 133 { 134 int error; 135 136 (void)RUN_ONCE(&once_envsys, sme_preinit); 137 138 error = sysmon_attach_minor(SYSMON_MINOR_ENVSYS, &sysmon_envsys_opvec); 139 140 return error; 141 } 142 143 int 144 sysmon_envsys_fini(void) 145 { 146 int error; 147 148 if ( ! LIST_EMPTY(&sysmon_envsys_list)) 149 error = EBUSY; 150 else 151 error = sysmon_attach_minor(SYSMON_MINOR_ENVSYS, NULL); 152 153 if (error == 0) 154 mutex_destroy(&sme_global_mtx); 155 156 // XXX: prop_dictionary ??? 157 158 return error; 159 } 160 161 /* 162 * sysmonopen_envsys: 163 * 164 * + Open the system monitor device. 165 */ 166 int 167 sysmonopen_envsys(dev_t dev, int flag, int mode, struct lwp *l) 168 { 169 return 0; 170 } 171 172 /* 173 * sysmonclose_envsys: 174 * 175 * + Close the system monitor device. 176 */ 177 int 178 sysmonclose_envsys(dev_t dev, int flag, int mode, struct lwp *l) 179 { 180 return 0; 181 } 182 183 /* 184 * sysmonioctl_envsys: 185 * 186 * + Perform a sysmon envsys control request. 187 */ 188 int 189 sysmonioctl_envsys(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l) 190 { 191 struct sysmon_envsys *sme = NULL; 192 int error = 0; 193 u_int oidx; 194 195 switch (cmd) { 196 /* 197 * To update the global dictionary with latest data from devices. 198 */ 199 case ENVSYS_GETDICTIONARY: 200 { 201 struct plistref *plist = (struct plistref *)data; 202 203 /* 204 * Update dictionaries on all sysmon envsys devices 205 * registered. 206 */ 207 mutex_enter(&sme_global_mtx); 208 LIST_FOREACH(sme, &sysmon_envsys_list, sme_list) { 209 sysmon_envsys_acquire(sme, false); 210 error = sme_update_dictionary(sme); 211 if (error) { 212 DPRINTF(("%s: sme_update_dictionary, " 213 "error=%d\n", __func__, error)); 214 sysmon_envsys_release(sme, false); 215 mutex_exit(&sme_global_mtx); 216 return error; 217 } 218 sysmon_envsys_release(sme, false); 219 } 220 mutex_exit(&sme_global_mtx); 221 /* 222 * Copy global dictionary to userland. 223 */ 224 error = prop_dictionary_copyout_ioctl(plist, cmd, sme_propd); 225 break; 226 } 227 /* 228 * To set properties on multiple devices. 229 */ 230 case ENVSYS_SETDICTIONARY: 231 { 232 const struct plistref *plist = (const struct plistref *)data; 233 prop_dictionary_t udict; 234 prop_object_iterator_t iter, iter2; 235 prop_object_t obj, obj2; 236 prop_array_t array_u, array_k; 237 const char *devname = NULL; 238 239 if ((flag & FWRITE) == 0) 240 return EPERM; 241 242 /* 243 * Get dictionary from userland. 244 */ 245 error = prop_dictionary_copyin_ioctl(plist, cmd, &udict); 246 if (error) { 247 DPRINTF(("%s: copyin_ioctl error=%d\n", 248 __func__, error)); 249 break; 250 } 251 252 iter = prop_dictionary_iterator(udict); 253 if (!iter) { 254 prop_object_release(udict); 255 return ENOMEM; 256 } 257 258 /* 259 * Iterate over the userland dictionary and process 260 * the list of devices. 261 */ 262 while ((obj = prop_object_iterator_next(iter))) { 263 array_u = prop_dictionary_get_keysym(udict, obj); 264 if (prop_object_type(array_u) != PROP_TYPE_ARRAY) { 265 prop_object_iterator_release(iter); 266 prop_object_release(udict); 267 return EINVAL; 268 } 269 270 devname = prop_dictionary_keysym_value(obj); 271 DPRINTF(("%s: processing the '%s' array requests\n", 272 __func__, devname)); 273 274 /* 275 * find the correct sme device. 276 */ 277 sme = sysmon_envsys_find(devname); 278 if (!sme) { 279 DPRINTF(("%s: NULL sme\n", __func__)); 280 prop_object_iterator_release(iter); 281 prop_object_release(udict); 282 return EINVAL; 283 } 284 285 /* 286 * Find the correct array object with the string 287 * supplied by the userland dictionary. 288 */ 289 array_k = prop_dictionary_get(sme_propd, devname); 290 if (prop_object_type(array_k) != PROP_TYPE_ARRAY) { 291 DPRINTF(("%s: array device failed\n", 292 __func__)); 293 sysmon_envsys_release(sme, false); 294 prop_object_iterator_release(iter); 295 prop_object_release(udict); 296 return EINVAL; 297 } 298 299 iter2 = prop_array_iterator(array_u); 300 if (!iter2) { 301 sysmon_envsys_release(sme, false); 302 prop_object_iterator_release(iter); 303 prop_object_release(udict); 304 return ENOMEM; 305 } 306 307 /* 308 * Iterate over the array of dictionaries to 309 * process the list of sensors and properties. 310 */ 311 while ((obj2 = prop_object_iterator_next(iter2))) { 312 /* 313 * do the real work now. 314 */ 315 error = sme_userset_dictionary(sme, 316 obj2, 317 array_k); 318 if (error) { 319 sysmon_envsys_release(sme, false); 320 prop_object_iterator_release(iter2); 321 prop_object_iterator_release(iter); 322 prop_object_release(udict); 323 return error; 324 } 325 } 326 327 sysmon_envsys_release(sme, false); 328 prop_object_iterator_release(iter2); 329 } 330 331 prop_object_iterator_release(iter); 332 prop_object_release(udict); 333 break; 334 } 335 /* 336 * To remove all properties from all devices registered. 337 */ 338 case ENVSYS_REMOVEPROPS: 339 { 340 const struct plistref *plist = (const struct plistref *)data; 341 prop_dictionary_t udict; 342 prop_object_t obj; 343 344 if ((flag & FWRITE) == 0) 345 return EPERM; 346 347 error = prop_dictionary_copyin_ioctl(plist, cmd, &udict); 348 if (error) { 349 DPRINTF(("%s: copyin_ioctl error=%d\n", 350 __func__, error)); 351 break; 352 } 353 354 obj = prop_dictionary_get(udict, "envsys-remove-props"); 355 if (!obj || !prop_bool_true(obj)) { 356 DPRINTF(("%s: invalid 'envsys-remove-props'\n", 357 __func__)); 358 return EINVAL; 359 } 360 361 prop_object_release(udict); 362 sme_remove_userprops(); 363 364 break; 365 } 366 /* 367 * Compatibility ioctls with the old interface, only implemented 368 * ENVSYS_GTREDATA and ENVSYS_GTREINFO; enough to make old 369 * applications work. 370 */ 371 case ENVSYS_GTREDATA: 372 { 373 struct envsys_tre_data *tred = (void *)data; 374 envsys_data_t *edata = NULL; 375 bool found = false; 376 377 tred->validflags = 0; 378 379 sme = sysmon_envsys_find_40(tred->sensor); 380 if (!sme) 381 break; 382 383 oidx = tred->sensor; 384 tred->sensor = SME_SENSOR_IDX(sme, tred->sensor); 385 386 DPRINTFOBJ(("%s: sensor=%d oidx=%d dev=%s nsensors=%d\n", 387 __func__, tred->sensor, oidx, sme->sme_name, 388 sme->sme_nsensors)); 389 390 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 391 if (edata->sensor == tred->sensor) { 392 found = true; 393 break; 394 } 395 } 396 397 if (!found) { 398 sysmon_envsys_release(sme, false); 399 error = ENODEV; 400 break; 401 } 402 403 if (tred->sensor < sme->sme_nsensors) { 404 if ((sme->sme_flags & SME_POLL_ONLY) == 0) { 405 mutex_enter(&sme->sme_mtx); 406 sysmon_envsys_refresh_sensor(sme, edata); 407 mutex_exit(&sme->sme_mtx); 408 } 409 410 /* 411 * copy required values to the old interface. 412 */ 413 tred->sensor = edata->sensor; 414 tred->cur.data_us = edata->value_cur; 415 tred->cur.data_s = edata->value_cur; 416 tred->max.data_us = edata->value_max; 417 tred->max.data_s = edata->value_max; 418 tred->min.data_us = edata->value_min; 419 tred->min.data_s = edata->value_min; 420 tred->avg.data_us = 0; 421 tred->avg.data_s = 0; 422 if (edata->units == ENVSYS_BATTERY_CHARGE) 423 tred->units = ENVSYS_INDICATOR; 424 else 425 tred->units = edata->units; 426 427 tred->validflags |= ENVSYS_FVALID; 428 tred->validflags |= ENVSYS_FCURVALID; 429 430 if (edata->flags & ENVSYS_FPERCENT) { 431 tred->validflags |= ENVSYS_FMAXVALID; 432 tred->validflags |= ENVSYS_FFRACVALID; 433 } 434 435 if (edata->state == ENVSYS_SINVALID) { 436 tred->validflags &= ~ENVSYS_FCURVALID; 437 tred->cur.data_us = tred->cur.data_s = 0; 438 } 439 440 DPRINTFOBJ(("%s: sensor=%s tred->cur.data_s=%d\n", 441 __func__, edata->desc, tred->cur.data_s)); 442 DPRINTFOBJ(("%s: tred->validflags=%d tred->units=%d" 443 " tred->sensor=%d\n", __func__, tred->validflags, 444 tred->units, tred->sensor)); 445 } 446 tred->sensor = oidx; 447 sysmon_envsys_release(sme, false); 448 449 break; 450 } 451 case ENVSYS_GTREINFO: 452 { 453 struct envsys_basic_info *binfo = (void *)data; 454 envsys_data_t *edata = NULL; 455 bool found = false; 456 457 binfo->validflags = 0; 458 459 sme = sysmon_envsys_find_40(binfo->sensor); 460 if (!sme) 461 break; 462 463 oidx = binfo->sensor; 464 binfo->sensor = SME_SENSOR_IDX(sme, binfo->sensor); 465 466 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 467 if (edata->sensor == binfo->sensor) { 468 found = true; 469 break; 470 } 471 } 472 473 if (!found) { 474 sysmon_envsys_release(sme, false); 475 error = ENODEV; 476 break; 477 } 478 479 binfo->validflags |= ENVSYS_FVALID; 480 481 if (binfo->sensor < sme->sme_nsensors) { 482 if (edata->units == ENVSYS_BATTERY_CHARGE) 483 binfo->units = ENVSYS_INDICATOR; 484 else 485 binfo->units = edata->units; 486 487 /* 488 * previously, the ACPI sensor names included the 489 * device name. Include that in compatibility code. 490 */ 491 if (strncmp(sme->sme_name, "acpi", 4) == 0) 492 (void)snprintf(binfo->desc, sizeof(binfo->desc), 493 "%s %s", sme->sme_name, edata->desc); 494 else 495 (void)strlcpy(binfo->desc, edata->desc, 496 sizeof(binfo->desc)); 497 } 498 499 DPRINTFOBJ(("%s: binfo->units=%d binfo->validflags=%d\n", 500 __func__, binfo->units, binfo->validflags)); 501 DPRINTFOBJ(("%s: binfo->desc=%s binfo->sensor=%d\n", 502 __func__, binfo->desc, binfo->sensor)); 503 504 binfo->sensor = oidx; 505 sysmon_envsys_release(sme, false); 506 507 break; 508 } 509 default: 510 error = ENOTTY; 511 break; 512 } 513 514 return error; 515 } 516 517 /* 518 * sysmon_envsys_create: 519 * 520 * + Allocates a new sysmon_envsys object and initializes the 521 * stuff for sensors and events. 522 */ 523 struct sysmon_envsys * 524 sysmon_envsys_create(void) 525 { 526 struct sysmon_envsys *sme; 527 528 CTASSERT(SME_CALLOUT_INVALID == 0); 529 530 sme = kmem_zalloc(sizeof(*sme), KM_SLEEP); 531 TAILQ_INIT(&sme->sme_sensors_list); 532 LIST_INIT(&sme->sme_events_list); 533 mutex_init(&sme->sme_mtx, MUTEX_DEFAULT, IPL_NONE); 534 mutex_init(&sme->sme_work_mtx, MUTEX_DEFAULT, IPL_NONE); 535 cv_init(&sme->sme_condvar, "sme_wait"); 536 537 return sme; 538 } 539 540 /* 541 * sysmon_envsys_destroy: 542 * 543 * + Removes all sensors from the tail queue, destroys the callout 544 * and frees the sysmon_envsys object. 545 */ 546 void 547 sysmon_envsys_destroy(struct sysmon_envsys *sme) 548 { 549 envsys_data_t *edata; 550 551 KASSERT(sme != NULL); 552 553 while (!TAILQ_EMPTY(&sme->sme_sensors_list)) { 554 edata = TAILQ_FIRST(&sme->sme_sensors_list); 555 TAILQ_REMOVE(&sme->sme_sensors_list, edata, sensors_head); 556 } 557 mutex_destroy(&sme->sme_mtx); 558 mutex_destroy(&sme->sme_work_mtx); 559 cv_destroy(&sme->sme_condvar); 560 kmem_free(sme, sizeof(*sme)); 561 } 562 563 /* 564 * sysmon_envsys_sensor_attach: 565 * 566 * + Attaches a sensor into a sysmon_envsys device checking that units 567 * is set to a valid type and description is unique and not empty. 568 */ 569 int 570 sysmon_envsys_sensor_attach(struct sysmon_envsys *sme, envsys_data_t *edata) 571 { 572 const struct sme_descr_entry *sdt_units; 573 envsys_data_t *oedata; 574 575 KASSERT(sme != NULL || edata != NULL); 576 577 /* 578 * Find the correct units for this sensor. 579 */ 580 sdt_units = sme_find_table_entry(SME_DESC_UNITS, edata->units); 581 if (sdt_units == NULL || sdt_units->type == -1) 582 return EINVAL; 583 584 /* 585 * Check that description is not empty or duplicate. 586 */ 587 if (strlen(edata->desc) == 0) 588 return EINVAL; 589 590 mutex_enter(&sme->sme_mtx); 591 sysmon_envsys_acquire(sme, true); 592 TAILQ_FOREACH(oedata, &sme->sme_sensors_list, sensors_head) { 593 if (strcmp(oedata->desc, edata->desc) == 0) { 594 sysmon_envsys_release(sme, true); 595 mutex_exit(&sme->sme_mtx); 596 return EEXIST; 597 } 598 } 599 /* 600 * Ok, the sensor has been added into the device queue. 601 */ 602 TAILQ_INSERT_TAIL(&sme->sme_sensors_list, edata, sensors_head); 603 604 /* 605 * Give the sensor an index position. 606 */ 607 edata->sensor = sme->sme_nsensors; 608 sme->sme_nsensors++; 609 sysmon_envsys_release(sme, true); 610 mutex_exit(&sme->sme_mtx); 611 612 DPRINTF(("%s: attached #%d (%s), units=%d (%s)\n", 613 __func__, edata->sensor, edata->desc, 614 sdt_units->type, sdt_units->desc)); 615 616 return 0; 617 } 618 619 /* 620 * sysmon_envsys_sensor_detach: 621 * 622 * + Detachs a sensor from a sysmon_envsys device and decrements the 623 * sensors count on success. 624 */ 625 int 626 sysmon_envsys_sensor_detach(struct sysmon_envsys *sme, envsys_data_t *edata) 627 { 628 envsys_data_t *oedata; 629 bool found = false; 630 bool destroy = false; 631 632 KASSERT(sme != NULL || edata != NULL); 633 634 /* 635 * Check the sensor is already on the list. 636 */ 637 mutex_enter(&sme->sme_mtx); 638 sysmon_envsys_acquire(sme, true); 639 TAILQ_FOREACH(oedata, &sme->sme_sensors_list, sensors_head) { 640 if (oedata->sensor == edata->sensor) { 641 found = true; 642 break; 643 } 644 } 645 646 if (!found) { 647 sysmon_envsys_release(sme, true); 648 mutex_exit(&sme->sme_mtx); 649 return EINVAL; 650 } 651 652 /* 653 * remove it, unhook from rnd(4), and decrement the sensors count. 654 */ 655 if (oedata->flags & ENVSYS_FHAS_ENTROPY) 656 rnd_detach_source(&oedata->rnd_src); 657 sme_event_unregister_sensor(sme, edata); 658 if (LIST_EMPTY(&sme->sme_events_list)) { 659 if (sme->sme_callout_state == SME_CALLOUT_READY) 660 sme_events_halt_callout(sme); 661 destroy = true; 662 } 663 TAILQ_REMOVE(&sme->sme_sensors_list, edata, sensors_head); 664 sme->sme_nsensors--; 665 sysmon_envsys_release(sme, true); 666 mutex_exit(&sme->sme_mtx); 667 668 if (destroy) 669 sme_events_destroy(sme); 670 671 return 0; 672 } 673 674 675 /* 676 * sysmon_envsys_register: 677 * 678 * + Register a sysmon envsys device. 679 * + Create array of dictionaries for a device. 680 */ 681 int 682 sysmon_envsys_register(struct sysmon_envsys *sme) 683 { 684 struct sme_evdrv { 685 SLIST_ENTRY(sme_evdrv) evdrv_head; 686 sme_event_drv_t *evdrv; 687 }; 688 SLIST_HEAD(, sme_evdrv) sme_evdrv_list; 689 struct sme_evdrv *evdv = NULL; 690 struct sysmon_envsys *lsme; 691 prop_array_t array = NULL; 692 prop_dictionary_t dict, dict2; 693 envsys_data_t *edata = NULL; 694 sme_event_drv_t *this_evdrv; 695 int nevent; 696 int error = 0; 697 char rnd_name[sizeof(edata->rnd_src.name)]; 698 699 KASSERT(sme != NULL); 700 KASSERT(sme->sme_name != NULL); 701 702 (void)RUN_ONCE(&once_envsys, sme_preinit); 703 704 /* 705 * Check if requested sysmon_envsys device is valid 706 * and does not exist already in the list. 707 */ 708 mutex_enter(&sme_global_mtx); 709 LIST_FOREACH(lsme, &sysmon_envsys_list, sme_list) { 710 if (strcmp(lsme->sme_name, sme->sme_name) == 0) { 711 mutex_exit(&sme_global_mtx); 712 return EEXIST; 713 } 714 } 715 mutex_exit(&sme_global_mtx); 716 717 /* 718 * sanity check: if SME_DISABLE_REFRESH is not set, 719 * the sme_refresh function callback must be non NULL. 720 */ 721 if ((sme->sme_flags & SME_DISABLE_REFRESH) == 0) 722 if (!sme->sme_refresh) 723 return EINVAL; 724 725 /* 726 * If the list of sensors is empty, there's no point to continue... 727 */ 728 if (TAILQ_EMPTY(&sme->sme_sensors_list)) { 729 DPRINTF(("%s: sensors list empty for %s\n", __func__, 730 sme->sme_name)); 731 return ENOTSUP; 732 } 733 734 /* 735 * Initialize the singly linked list for driver events. 736 */ 737 SLIST_INIT(&sme_evdrv_list); 738 739 array = prop_array_create(); 740 if (!array) 741 return ENOMEM; 742 743 /* 744 * Iterate over all sensors and create a dictionary per sensor. 745 * We must respect the order in which the sensors were added. 746 */ 747 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 748 dict = prop_dictionary_create(); 749 if (!dict) { 750 error = ENOMEM; 751 goto out2; 752 } 753 754 /* 755 * Create all objects in sensor's dictionary. 756 */ 757 this_evdrv = sme_add_sensor_dictionary(sme, array, 758 dict, edata); 759 if (this_evdrv) { 760 evdv = kmem_zalloc(sizeof(*evdv), KM_SLEEP); 761 evdv->evdrv = this_evdrv; 762 SLIST_INSERT_HEAD(&sme_evdrv_list, evdv, evdrv_head); 763 } 764 } 765 766 /* 767 * If the array does not contain any object (sensor), there's 768 * no need to attach the driver. 769 */ 770 if (prop_array_count(array) == 0) { 771 error = EINVAL; 772 DPRINTF(("%s: empty array for '%s'\n", __func__, 773 sme->sme_name)); 774 goto out; 775 } 776 777 /* 778 * Add the dictionary for the global properties of this device. 779 */ 780 dict2 = prop_dictionary_create(); 781 if (!dict2) { 782 error = ENOMEM; 783 goto out; 784 } 785 786 error = sme_add_property_dictionary(sme, array, dict2); 787 if (error) { 788 prop_object_release(dict2); 789 goto out; 790 } 791 792 /* 793 * Add the array into the global dictionary for the driver. 794 * 795 * <dict> 796 * <key>foo0</key> 797 * <array> 798 * ... 799 */ 800 mutex_enter(&sme_global_mtx); 801 if (!prop_dictionary_set(sme_propd, sme->sme_name, array)) { 802 error = EINVAL; 803 mutex_exit(&sme_global_mtx); 804 DPRINTF(("%s: prop_dictionary_set for '%s'\n", __func__, 805 sme->sme_name)); 806 goto out; 807 } 808 809 /* 810 * Add the device into the list. 811 */ 812 LIST_INSERT_HEAD(&sysmon_envsys_list, sme, sme_list); 813 sme->sme_fsensor = sysmon_envsys_next_sensor_index; 814 sysmon_envsys_next_sensor_index += sme->sme_nsensors; 815 mutex_exit(&sme_global_mtx); 816 817 out: 818 /* 819 * No errors? Make an initial data refresh if was requested, 820 * then register the events that were set in the driver. Do 821 * the refresh first in case it is needed to establish the 822 * limits or max_value needed by some events. 823 */ 824 if (error == 0) { 825 nevent = 0; 826 827 /* 828 * Hook the sensor into rnd(4) entropy pool if requested 829 */ 830 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 831 if (edata->flags & ENVSYS_FHAS_ENTROPY) { 832 uint32_t rnd_type, rnd_flag = 0; 833 size_t n; 834 int tail = 1; 835 836 snprintf(rnd_name, sizeof(rnd_name), "%s-%s", 837 sme->sme_name, edata->desc); 838 n = strlen(rnd_name); 839 /* 840 * 1) Remove trailing white space(s). 841 * 2) If space exist, replace it with '-' 842 */ 843 while (--n) { 844 if (rnd_name[n] == ' ') { 845 if (tail != 0) 846 rnd_name[n] = '\0'; 847 else 848 rnd_name[n] = '-'; 849 } else 850 tail = 0; 851 } 852 rnd_flag |= RND_FLAG_COLLECT_TIME; 853 rnd_flag |= RND_FLAG_ESTIMATE_TIME; 854 855 switch (edata->units) { 856 case ENVSYS_STEMP: 857 case ENVSYS_SFANRPM: 858 case ENVSYS_INTEGER: 859 rnd_type = RND_TYPE_ENV; 860 rnd_flag |= RND_FLAG_COLLECT_VALUE; 861 rnd_flag |= RND_FLAG_ESTIMATE_VALUE; 862 break; 863 case ENVSYS_SVOLTS_AC: 864 case ENVSYS_SVOLTS_DC: 865 case ENVSYS_SOHMS: 866 case ENVSYS_SWATTS: 867 case ENVSYS_SAMPS: 868 case ENVSYS_SWATTHOUR: 869 case ENVSYS_SAMPHOUR: 870 rnd_type = RND_TYPE_POWER; 871 rnd_flag |= RND_FLAG_COLLECT_VALUE; 872 rnd_flag |= RND_FLAG_ESTIMATE_VALUE; 873 break; 874 default: 875 rnd_type = RND_TYPE_UNKNOWN; 876 break; 877 } 878 rnd_attach_source(&edata->rnd_src, rnd_name, 879 rnd_type, rnd_flag); 880 } 881 } 882 883 if (sme->sme_flags & SME_INIT_REFRESH) { 884 sysmon_task_queue_sched(0, sme_initial_refresh, sme); 885 DPRINTF(("%s: scheduled initial refresh for '%s'\n", 886 __func__, sme->sme_name)); 887 } 888 SLIST_FOREACH(evdv, &sme_evdrv_list, evdrv_head) { 889 sysmon_task_queue_sched(0, 890 sme_event_drvadd, evdv->evdrv); 891 nevent++; 892 } 893 DPRINTF(("%s: driver '%s' registered (nsens=%d nevent=%d)\n", 894 __func__, sme->sme_name, sme->sme_nsensors, nevent)); 895 } 896 897 out2: 898 while (!SLIST_EMPTY(&sme_evdrv_list)) { 899 evdv = SLIST_FIRST(&sme_evdrv_list); 900 SLIST_REMOVE_HEAD(&sme_evdrv_list, evdrv_head); 901 kmem_free(evdv, sizeof(*evdv)); 902 } 903 if (!error) 904 return 0; 905 906 /* 907 * Ugh... something wasn't right; unregister all events and sensors 908 * previously assigned and destroy the array with all its objects. 909 */ 910 DPRINTF(("%s: failed to register '%s' (%d)\n", __func__, 911 sme->sme_name, error)); 912 913 sme_event_unregister_all(sme); 914 while (!TAILQ_EMPTY(&sme->sme_sensors_list)) { 915 edata = TAILQ_FIRST(&sme->sme_sensors_list); 916 TAILQ_REMOVE(&sme->sme_sensors_list, edata, sensors_head); 917 } 918 sysmon_envsys_destroy_plist(array); 919 return error; 920 } 921 922 /* 923 * sysmon_envsys_destroy_plist: 924 * 925 * + Remove all objects from the array of dictionaries that is 926 * created in a sysmon envsys device. 927 */ 928 static void 929 sysmon_envsys_destroy_plist(prop_array_t array) 930 { 931 prop_object_iterator_t iter, iter2; 932 prop_dictionary_t dict; 933 prop_object_t obj; 934 935 KASSERT(array != NULL); 936 KASSERT(prop_object_type(array) == PROP_TYPE_ARRAY); 937 938 DPRINTFOBJ(("%s: objects in array=%d\n", __func__, 939 prop_array_count(array))); 940 941 iter = prop_array_iterator(array); 942 if (!iter) 943 return; 944 945 while ((dict = prop_object_iterator_next(iter))) { 946 KASSERT(prop_object_type(dict) == PROP_TYPE_DICTIONARY); 947 iter2 = prop_dictionary_iterator(dict); 948 if (!iter2) 949 goto out; 950 DPRINTFOBJ(("%s: iterating over dictionary\n", __func__)); 951 while ((obj = prop_object_iterator_next(iter2)) != NULL) { 952 DPRINTFOBJ(("%s: obj=%s\n", __func__, 953 prop_dictionary_keysym_value(obj))); 954 prop_dictionary_remove(dict, 955 prop_dictionary_keysym_value(obj)); 956 prop_object_iterator_reset(iter2); 957 } 958 prop_object_iterator_release(iter2); 959 DPRINTFOBJ(("%s: objects in dictionary:%d\n", 960 __func__, prop_dictionary_count(dict))); 961 prop_object_release(dict); 962 } 963 964 out: 965 prop_object_iterator_release(iter); 966 prop_object_release(array); 967 } 968 969 /* 970 * sysmon_envsys_unregister: 971 * 972 * + Unregister a sysmon envsys device. 973 */ 974 void 975 sysmon_envsys_unregister(struct sysmon_envsys *sme) 976 { 977 prop_array_t array; 978 struct sysmon_envsys *osme; 979 envsys_data_t *edata; 980 981 KASSERT(sme != NULL); 982 983 /* 984 * Decrement global sensors counter and the first_sensor index 985 * for remaining devices in the list (only used for compatibility 986 * with previous API), and remove the device from the list. 987 */ 988 mutex_enter(&sme_global_mtx); 989 sysmon_envsys_next_sensor_index -= sme->sme_nsensors; 990 LIST_FOREACH(osme, &sysmon_envsys_list, sme_list) { 991 if (osme->sme_fsensor >= sme->sme_fsensor) 992 osme->sme_fsensor -= sme->sme_nsensors; 993 } 994 LIST_REMOVE(sme, sme_list); 995 mutex_exit(&sme_global_mtx); 996 997 while ((edata = TAILQ_FIRST(&sme->sme_sensors_list)) != NULL) { 998 sysmon_envsys_sensor_detach(sme, edata); 999 } 1000 1001 /* 1002 * Unregister all events associated with device. 1003 */ 1004 sme_event_unregister_all(sme); 1005 1006 /* 1007 * Remove the device (and all its objects) from the global dictionary. 1008 */ 1009 array = prop_dictionary_get(sme_propd, sme->sme_name); 1010 if (array && prop_object_type(array) == PROP_TYPE_ARRAY) { 1011 mutex_enter(&sme_global_mtx); 1012 prop_dictionary_remove(sme_propd, sme->sme_name); 1013 mutex_exit(&sme_global_mtx); 1014 sysmon_envsys_destroy_plist(array); 1015 } 1016 /* 1017 * And finally destroy the sysmon_envsys object. 1018 */ 1019 sysmon_envsys_destroy(sme); 1020 } 1021 1022 /* 1023 * sysmon_envsys_find: 1024 * 1025 * + Find a sysmon envsys device and mark it as busy 1026 * once it's available. 1027 */ 1028 struct sysmon_envsys * 1029 sysmon_envsys_find(const char *name) 1030 { 1031 struct sysmon_envsys *sme; 1032 1033 mutex_enter(&sme_global_mtx); 1034 LIST_FOREACH(sme, &sysmon_envsys_list, sme_list) { 1035 if (strcmp(sme->sme_name, name) == 0) { 1036 sysmon_envsys_acquire(sme, false); 1037 break; 1038 } 1039 } 1040 mutex_exit(&sme_global_mtx); 1041 1042 return sme; 1043 } 1044 1045 /* 1046 * Compatibility function with the old API. 1047 */ 1048 struct sysmon_envsys * 1049 sysmon_envsys_find_40(u_int idx) 1050 { 1051 struct sysmon_envsys *sme; 1052 1053 mutex_enter(&sme_global_mtx); 1054 LIST_FOREACH(sme, &sysmon_envsys_list, sme_list) { 1055 if (idx >= sme->sme_fsensor && 1056 idx < (sme->sme_fsensor + sme->sme_nsensors)) { 1057 sysmon_envsys_acquire(sme, false); 1058 break; 1059 } 1060 } 1061 mutex_exit(&sme_global_mtx); 1062 1063 return sme; 1064 } 1065 1066 /* 1067 * sysmon_envsys_acquire: 1068 * 1069 * + Wait until a sysmon envsys device is available and mark 1070 * it as busy. 1071 */ 1072 void 1073 sysmon_envsys_acquire(struct sysmon_envsys *sme, bool locked) 1074 { 1075 KASSERT(sme != NULL); 1076 1077 if (locked) { 1078 while (sme->sme_flags & SME_FLAG_BUSY) 1079 cv_wait(&sme->sme_condvar, &sme->sme_mtx); 1080 sme->sme_flags |= SME_FLAG_BUSY; 1081 } else { 1082 mutex_enter(&sme->sme_mtx); 1083 while (sme->sme_flags & SME_FLAG_BUSY) 1084 cv_wait(&sme->sme_condvar, &sme->sme_mtx); 1085 sme->sme_flags |= SME_FLAG_BUSY; 1086 mutex_exit(&sme->sme_mtx); 1087 } 1088 } 1089 1090 /* 1091 * sysmon_envsys_release: 1092 * 1093 * + Unmark a sysmon envsys device as busy, and notify 1094 * waiters. 1095 */ 1096 void 1097 sysmon_envsys_release(struct sysmon_envsys *sme, bool locked) 1098 { 1099 KASSERT(sme != NULL); 1100 1101 if (locked) { 1102 sme->sme_flags &= ~SME_FLAG_BUSY; 1103 cv_broadcast(&sme->sme_condvar); 1104 } else { 1105 mutex_enter(&sme->sme_mtx); 1106 sme->sme_flags &= ~SME_FLAG_BUSY; 1107 cv_broadcast(&sme->sme_condvar); 1108 mutex_exit(&sme->sme_mtx); 1109 } 1110 } 1111 1112 /* 1113 * sme_initial_refresh: 1114 * 1115 * + Do an initial refresh of the sensors in a device just after 1116 * interrupts are enabled in the autoconf(9) process. 1117 * 1118 */ 1119 static void 1120 sme_initial_refresh(void *arg) 1121 { 1122 struct sysmon_envsys *sme = arg; 1123 envsys_data_t *edata; 1124 1125 mutex_enter(&sme->sme_mtx); 1126 sysmon_envsys_acquire(sme, true); 1127 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) 1128 sysmon_envsys_refresh_sensor(sme, edata); 1129 sysmon_envsys_release(sme, true); 1130 mutex_exit(&sme->sme_mtx); 1131 } 1132 1133 /* 1134 * sme_sensor_dictionary_get: 1135 * 1136 * + Returns a dictionary of a device specified by its index 1137 * position. 1138 */ 1139 prop_dictionary_t 1140 sme_sensor_dictionary_get(prop_array_t array, const char *index) 1141 { 1142 prop_object_iterator_t iter; 1143 prop_dictionary_t dict; 1144 prop_object_t obj; 1145 1146 KASSERT(array != NULL || index != NULL); 1147 1148 iter = prop_array_iterator(array); 1149 if (!iter) 1150 return NULL; 1151 1152 while ((dict = prop_object_iterator_next(iter))) { 1153 obj = prop_dictionary_get(dict, "index"); 1154 if (prop_string_equals_string(obj, index)) 1155 break; 1156 } 1157 1158 prop_object_iterator_release(iter); 1159 return dict; 1160 } 1161 1162 /* 1163 * sme_remove_userprops: 1164 * 1165 * + Remove all properties from all devices that were set by 1166 * the ENVSYS_SETDICTIONARY ioctl. 1167 */ 1168 static void 1169 sme_remove_userprops(void) 1170 { 1171 struct sysmon_envsys *sme; 1172 prop_array_t array; 1173 prop_dictionary_t sdict; 1174 envsys_data_t *edata = NULL; 1175 char tmp[ENVSYS_DESCLEN]; 1176 char rnd_name[sizeof(edata->rnd_src.name)]; 1177 sysmon_envsys_lim_t lims; 1178 const struct sme_descr_entry *sdt_units; 1179 uint32_t props; 1180 int ptype; 1181 1182 mutex_enter(&sme_global_mtx); 1183 LIST_FOREACH(sme, &sysmon_envsys_list, sme_list) { 1184 sysmon_envsys_acquire(sme, false); 1185 array = prop_dictionary_get(sme_propd, sme->sme_name); 1186 1187 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 1188 (void)snprintf(tmp, sizeof(tmp), "sensor%d", 1189 edata->sensor); 1190 sdict = sme_sensor_dictionary_get(array, tmp); 1191 KASSERT(sdict != NULL); 1192 1193 ptype = 0; 1194 if (edata->upropset & PROP_BATTCAP) { 1195 prop_dictionary_remove(sdict, 1196 "critical-capacity"); 1197 ptype = PENVSYS_EVENT_CAPACITY; 1198 } 1199 1200 if (edata->upropset & PROP_BATTWARN) { 1201 prop_dictionary_remove(sdict, 1202 "warning-capacity"); 1203 ptype = PENVSYS_EVENT_CAPACITY; 1204 } 1205 1206 if (edata->upropset & PROP_BATTHIGH) { 1207 prop_dictionary_remove(sdict, 1208 "high-capacity"); 1209 ptype = PENVSYS_EVENT_CAPACITY; 1210 } 1211 1212 if (edata->upropset & PROP_BATTMAX) { 1213 prop_dictionary_remove(sdict, 1214 "maximum-capacity"); 1215 ptype = PENVSYS_EVENT_CAPACITY; 1216 } 1217 if (edata->upropset & PROP_WARNMAX) { 1218 prop_dictionary_remove(sdict, "warning-max"); 1219 ptype = PENVSYS_EVENT_LIMITS; 1220 } 1221 1222 if (edata->upropset & PROP_WARNMIN) { 1223 prop_dictionary_remove(sdict, "warning-min"); 1224 ptype = PENVSYS_EVENT_LIMITS; 1225 } 1226 1227 if (edata->upropset & PROP_CRITMAX) { 1228 prop_dictionary_remove(sdict, "critical-max"); 1229 ptype = PENVSYS_EVENT_LIMITS; 1230 } 1231 1232 if (edata->upropset & PROP_CRITMIN) { 1233 prop_dictionary_remove(sdict, "critical-min"); 1234 ptype = PENVSYS_EVENT_LIMITS; 1235 } 1236 if (edata->upropset & PROP_RFACT) { 1237 (void)sme_sensor_upint32(sdict, "rfact", 0); 1238 edata->rfact = 0; 1239 } 1240 1241 if (edata->upropset & PROP_DESC) 1242 (void)sme_sensor_upstring(sdict, 1243 "description", edata->desc); 1244 1245 if (ptype == 0) 1246 continue; 1247 1248 /* 1249 * If there were any limit values removed, we 1250 * need to revert to initial limits. 1251 * 1252 * First, tell the driver that we need it to 1253 * restore any h/w limits which may have been 1254 * changed to stored, boot-time values. 1255 */ 1256 if (sme->sme_set_limits) { 1257 DPRINTF(("%s: reset limits for %s %s\n", 1258 __func__, sme->sme_name, edata->desc)); 1259 (*sme->sme_set_limits)(sme, edata, NULL, NULL); 1260 } 1261 1262 /* 1263 * Next, we need to retrieve those initial limits. 1264 */ 1265 props = 0; 1266 edata->upropset &= ~PROP_LIMITS; 1267 if (sme->sme_get_limits) { 1268 DPRINTF(("%s: retrieve limits for %s %s\n", 1269 __func__, sme->sme_name, edata->desc)); 1270 lims = edata->limits; 1271 (*sme->sme_get_limits)(sme, edata, &lims, 1272 &props); 1273 } 1274 1275 /* 1276 * If the sensor is providing entropy data, 1277 * get rid of the rndsrc; we'll provide a new 1278 * one shortly. 1279 */ 1280 if (edata->flags & ENVSYS_FHAS_ENTROPY) 1281 rnd_detach_source(&edata->rnd_src); 1282 1283 /* 1284 * Remove the old limits event, if any 1285 */ 1286 sme_event_unregister(sme, edata->desc, 1287 PENVSYS_EVENT_LIMITS); 1288 1289 /* 1290 * Create and install a new event (which will 1291 * update the dictionary) with the correct 1292 * units. 1293 */ 1294 sdt_units = sme_find_table_entry(SME_DESC_UNITS, 1295 edata->units); 1296 1297 if (props & PROP_LIMITS) { 1298 DPRINTF(("%s: install limits for %s %s\n", 1299 __func__, sme->sme_name, edata->desc)); 1300 1301 sme_event_register(sdict, edata, sme, 1302 &lims, props, PENVSYS_EVENT_LIMITS, 1303 sdt_units->crittype); 1304 } 1305 1306 /* Finally, if the sensor provides entropy, 1307 * create an additional event entry and attach 1308 * the rndsrc 1309 */ 1310 if (edata->flags & ENVSYS_FHAS_ENTROPY) { 1311 sme_event_register(sdict, edata, sme, 1312 &lims, props, PENVSYS_EVENT_NULL, 1313 sdt_units->crittype); 1314 snprintf(rnd_name, sizeof(rnd_name), "%s-%s", 1315 sme->sme_name, edata->desc); 1316 rnd_attach_source(&edata->rnd_src, rnd_name, 1317 RND_TYPE_ENV, RND_FLAG_COLLECT_VALUE| 1318 RND_FLAG_COLLECT_TIME| 1319 RND_FLAG_ESTIMATE_VALUE| 1320 RND_FLAG_ESTIMATE_TIME); 1321 } 1322 } 1323 1324 /* 1325 * Restore default timeout value. 1326 */ 1327 sme->sme_events_timeout = SME_EVENTS_DEFTIMEOUT; 1328 1329 /* 1330 * Note that we need to hold the sme_mtx while calling 1331 * sme_schedule_callout(). Thus to avoid dropping, 1332 * reacquiring, and dropping it again, we just tell 1333 * sme_envsys_release() that the mutex is already owned. 1334 */ 1335 mutex_enter(&sme->sme_mtx); 1336 sme_schedule_callout(sme); 1337 sysmon_envsys_release(sme, true); 1338 mutex_exit(&sme->sme_mtx); 1339 } 1340 mutex_exit(&sme_global_mtx); 1341 } 1342 1343 /* 1344 * sme_add_property_dictionary: 1345 * 1346 * + Add global properties into a device. 1347 */ 1348 static int 1349 sme_add_property_dictionary(struct sysmon_envsys *sme, prop_array_t array, 1350 prop_dictionary_t dict) 1351 { 1352 prop_dictionary_t pdict; 1353 const char *class; 1354 int error = 0; 1355 1356 pdict = prop_dictionary_create(); 1357 if (!pdict) 1358 return EINVAL; 1359 1360 /* 1361 * Add the 'refresh-timeout' and 'dev-class' objects into the 1362 * 'device-properties' dictionary. 1363 * 1364 * ... 1365 * <dict> 1366 * <key>device-properties</key> 1367 * <dict> 1368 * <key>refresh-timeout</key> 1369 * <integer>120</integer< 1370 * <key>device-class</key> 1371 * <string>class_name</string> 1372 * </dict> 1373 * </dict> 1374 * ... 1375 * 1376 */ 1377 if (sme->sme_events_timeout == 0) { 1378 sme->sme_events_timeout = SME_EVENTS_DEFTIMEOUT; 1379 mutex_enter(&sme->sme_mtx); 1380 sme_schedule_callout(sme); 1381 mutex_exit(&sme->sme_mtx); 1382 } 1383 1384 if (!prop_dictionary_set_uint64(pdict, "refresh-timeout", 1385 sme->sme_events_timeout)) { 1386 error = EINVAL; 1387 goto out; 1388 } 1389 if (sme->sme_class == SME_CLASS_BATTERY) 1390 class = "battery"; 1391 else if (sme->sme_class == SME_CLASS_ACADAPTER) 1392 class = "ac-adapter"; 1393 else 1394 class = "other"; 1395 if (!prop_dictionary_set_string_nocopy(pdict, "device-class", class)) { 1396 error = EINVAL; 1397 goto out; 1398 } 1399 1400 if (!prop_dictionary_set(dict, "device-properties", pdict)) { 1401 error = EINVAL; 1402 goto out; 1403 } 1404 1405 /* 1406 * Add the device dictionary into the sysmon envsys array. 1407 */ 1408 if (!prop_array_add(array, dict)) 1409 error = EINVAL; 1410 1411 out: 1412 prop_object_release(pdict); 1413 return error; 1414 } 1415 1416 /* 1417 * sme_add_sensor_dictionary: 1418 * 1419 * + Adds the sensor objects into the dictionary and returns a pointer 1420 * to a sme_event_drv_t object if a monitoring flag was set 1421 * (or NULL otherwise). 1422 */ 1423 static sme_event_drv_t * 1424 sme_add_sensor_dictionary(struct sysmon_envsys *sme, prop_array_t array, 1425 prop_dictionary_t dict, envsys_data_t *edata) 1426 { 1427 const struct sme_descr_entry *sdt; 1428 int error; 1429 sme_event_drv_t *sme_evdrv_t = NULL; 1430 char indexstr[ENVSYS_DESCLEN]; 1431 bool mon_supported, allow_rfact; 1432 1433 /* 1434 * Add the index sensor string. 1435 * 1436 * ... 1437 * <key>index</eyr 1438 * <string>sensor0</string> 1439 * ... 1440 */ 1441 (void)snprintf(indexstr, sizeof(indexstr), "sensor%d", edata->sensor); 1442 if (sme_sensor_upstring(dict, "index", indexstr)) 1443 goto bad; 1444 1445 /* 1446 * ... 1447 * <key>description</key> 1448 * <string>blah blah</string> 1449 * ... 1450 */ 1451 if (sme_sensor_upstring(dict, "description", edata->desc)) 1452 goto bad; 1453 1454 /* 1455 * Add the monitoring boolean object: 1456 * 1457 * ... 1458 * <key>monitoring-supported</key> 1459 * <true/> 1460 * ... 1461 * 1462 * always false on Battery {capacity,charge}, Drive and Indicator types. 1463 * They cannot be monitored. 1464 * 1465 */ 1466 if ((edata->flags & ENVSYS_FMONNOTSUPP) || 1467 (edata->units == ENVSYS_INDICATOR) || 1468 (edata->units == ENVSYS_DRIVE) || 1469 (edata->units == ENVSYS_BATTERY_CAPACITY) || 1470 (edata->units == ENVSYS_BATTERY_CHARGE)) 1471 mon_supported = false; 1472 else 1473 mon_supported = true; 1474 if (sme_sensor_upbool(dict, "monitoring-supported", mon_supported)) 1475 goto out; 1476 1477 /* 1478 * Add the allow-rfact boolean object, true if 1479 * ENVSYS_FCHANGERFACT is set, false otherwise. 1480 * 1481 * ... 1482 * <key>allow-rfact</key> 1483 * <true/> 1484 * ... 1485 */ 1486 if (edata->units == ENVSYS_SVOLTS_DC || 1487 edata->units == ENVSYS_SVOLTS_AC) { 1488 if (edata->flags & ENVSYS_FCHANGERFACT) 1489 allow_rfact = true; 1490 else 1491 allow_rfact = false; 1492 if (sme_sensor_upbool(dict, "allow-rfact", allow_rfact)) 1493 goto out; 1494 } 1495 1496 error = sme_update_sensor_dictionary(dict, edata, 1497 (edata->state == ENVSYS_SVALID)); 1498 if (error < 0) 1499 goto bad; 1500 else if (error) 1501 goto out; 1502 1503 /* 1504 * ... 1505 * </dict> 1506 * 1507 * Add the dictionary into the array. 1508 * 1509 */ 1510 if (!prop_array_add(array, dict)) { 1511 DPRINTF(("%s: prop_array_add\n", __func__)); 1512 goto bad; 1513 } 1514 1515 /* 1516 * Register new event(s) if any monitoring flag was set or if 1517 * the sensor provides entropy for rnd(4). 1518 */ 1519 if (edata->flags & (ENVSYS_FMONANY | ENVSYS_FHAS_ENTROPY)) { 1520 sme_evdrv_t = kmem_zalloc(sizeof(*sme_evdrv_t), KM_SLEEP); 1521 sme_evdrv_t->sed_sdict = dict; 1522 sme_evdrv_t->sed_edata = edata; 1523 sme_evdrv_t->sed_sme = sme; 1524 sdt = sme_find_table_entry(SME_DESC_UNITS, edata->units); 1525 sme_evdrv_t->sed_powertype = sdt->crittype; 1526 } 1527 1528 out: 1529 return sme_evdrv_t; 1530 1531 bad: 1532 prop_object_release(dict); 1533 return NULL; 1534 } 1535 1536 /* 1537 * Find the maximum of all currently reported values. 1538 * The provided callback decides whether a sensor is part of the 1539 * maximum calculation (by returning true) or ignored (callback 1540 * returns false). Example usage: callback selects temperature 1541 * sensors in a given thermal zone, the function calculates the 1542 * maximum currently reported temperature in this zone. 1543 * If the parameter "refresh" is true, new values will be aquired 1544 * from the hardware, if not, the last reported value will be used. 1545 */ 1546 uint32_t 1547 sysmon_envsys_get_max_value(bool (*predicate)(const envsys_data_t*), 1548 bool refresh) 1549 { 1550 struct sysmon_envsys *sme; 1551 uint32_t maxv, v; 1552 1553 maxv = 0; 1554 mutex_enter(&sme_global_mtx); 1555 LIST_FOREACH(sme, &sysmon_envsys_list, sme_list) { 1556 sysmon_envsys_acquire(sme, false); 1557 v = sme_get_max_value(sme, predicate, refresh); 1558 sysmon_envsys_release(sme, false); 1559 if (v > maxv) 1560 maxv = v; 1561 } 1562 mutex_exit(&sme_global_mtx); 1563 return maxv; 1564 } 1565 1566 static uint32_t 1567 sme_get_max_value(struct sysmon_envsys *sme, 1568 bool (*predicate)(const envsys_data_t*), 1569 bool refresh) 1570 { 1571 envsys_data_t *edata; 1572 uint32_t maxv, v; 1573 1574 /* 1575 * Iterate over all sensors that match the predicate 1576 */ 1577 maxv = 0; 1578 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 1579 if (!(*predicate)(edata)) 1580 continue; 1581 1582 /* 1583 * refresh sensor data 1584 */ 1585 mutex_enter(&sme->sme_mtx); 1586 sysmon_envsys_refresh_sensor(sme, edata); 1587 mutex_exit(&sme->sme_mtx); 1588 1589 v = edata->value_cur; 1590 if (v > maxv) 1591 maxv = v; 1592 1593 } 1594 1595 return maxv; 1596 } 1597 1598 /* 1599 * sme_update_dictionary: 1600 * 1601 * + Update per-sensor dictionaries with new values if there were 1602 * changes, otherwise the object in dictionary is untouched. 1603 */ 1604 int 1605 sme_update_dictionary(struct sysmon_envsys *sme) 1606 { 1607 envsys_data_t *edata; 1608 prop_object_t array, dict, obj, obj2; 1609 int error = 0; 1610 1611 /* 1612 * Retrieve the array of dictionaries in device. 1613 */ 1614 array = prop_dictionary_get(sme_propd, sme->sme_name); 1615 if (prop_object_type(array) != PROP_TYPE_ARRAY) { 1616 DPRINTF(("%s: not an array (%s)\n", __func__, sme->sme_name)); 1617 return EINVAL; 1618 } 1619 1620 /* 1621 * Get the last dictionary on the array, this contains the 1622 * 'device-properties' sub-dictionary. 1623 */ 1624 obj = prop_array_get(array, prop_array_count(array) - 1); 1625 if (!obj || prop_object_type(obj) != PROP_TYPE_DICTIONARY) { 1626 DPRINTF(("%s: not a device-properties dictionary\n", __func__)); 1627 return EINVAL; 1628 } 1629 1630 obj2 = prop_dictionary_get(obj, "device-properties"); 1631 if (!obj2) 1632 return EINVAL; 1633 1634 /* 1635 * Update the 'refresh-timeout' property. 1636 */ 1637 if (!prop_dictionary_set_uint64(obj2, "refresh-timeout", 1638 sme->sme_events_timeout)) 1639 return EINVAL; 1640 1641 /* 1642 * - iterate over all sensors. 1643 * - fetch new data. 1644 * - check if data in dictionary is different than new data. 1645 * - update dictionary if there were changes. 1646 */ 1647 DPRINTF(("%s: updating '%s' with nsensors=%d\n", __func__, 1648 sme->sme_name, sme->sme_nsensors)); 1649 1650 /* 1651 * Don't bother with locking when traversing the queue, 1652 * the device is already marked as busy; if a sensor 1653 * is going to be removed or added it will have to wait. 1654 */ 1655 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 1656 /* 1657 * refresh sensor data via sme_envsys_refresh_sensor 1658 */ 1659 mutex_enter(&sme->sme_mtx); 1660 sysmon_envsys_refresh_sensor(sme, edata); 1661 mutex_exit(&sme->sme_mtx); 1662 1663 /* 1664 * retrieve sensor's dictionary. 1665 */ 1666 dict = prop_array_get(array, edata->sensor); 1667 if (prop_object_type(dict) != PROP_TYPE_DICTIONARY) { 1668 DPRINTF(("%s: not a dictionary (%d:%s)\n", 1669 __func__, edata->sensor, sme->sme_name)); 1670 return EINVAL; 1671 } 1672 1673 /* 1674 * update sensor's state. 1675 */ 1676 error = sme_update_sensor_dictionary(dict, edata, true); 1677 1678 if (error) 1679 break; 1680 } 1681 1682 return error; 1683 } 1684 1685 int 1686 sme_update_sensor_dictionary(prop_object_t dict, envsys_data_t *edata, 1687 bool value_update) 1688 { 1689 const struct sme_descr_entry *sdt; 1690 int error = 0; 1691 1692 sdt = sme_find_table_entry(SME_DESC_STATES, edata->state); 1693 if (sdt == NULL) { 1694 printf("sme_update_sensor_dictionary: cannot update sensor %d " 1695 "state %d unknown\n", edata->sensor, edata->state); 1696 return EINVAL; 1697 } 1698 1699 DPRINTFOBJ(("%s: sensor #%d type=%d (%s) flags=%d\n", __func__, 1700 edata->sensor, sdt->type, sdt->desc, edata->flags)); 1701 1702 error = sme_sensor_upstring(dict, "state", sdt->desc); 1703 if (error) 1704 return (-error); 1705 1706 /* 1707 * update sensor's type. 1708 */ 1709 sdt = sme_find_table_entry(SME_DESC_UNITS, edata->units); 1710 if (sdt == NULL) 1711 return EINVAL; 1712 1713 DPRINTFOBJ(("%s: sensor #%d units=%d (%s)\n", __func__, edata->sensor, 1714 sdt->type, sdt->desc)); 1715 1716 error = sme_sensor_upstring(dict, "type", sdt->desc); 1717 if (error) 1718 return (-error); 1719 1720 if (value_update) { 1721 /* 1722 * update sensor's current value. 1723 */ 1724 error = sme_sensor_upint32(dict, "cur-value", edata->value_cur); 1725 if (error) 1726 return error; 1727 } 1728 1729 /* 1730 * Battery charge and Indicator types do not 1731 * need the remaining objects, so skip them. 1732 */ 1733 if (edata->units == ENVSYS_INDICATOR || 1734 edata->units == ENVSYS_BATTERY_CHARGE) 1735 return error; 1736 1737 /* 1738 * update sensor flags. 1739 */ 1740 if (edata->flags & ENVSYS_FPERCENT) { 1741 error = sme_sensor_upbool(dict, "want-percentage", true); 1742 if (error) 1743 return error; 1744 } 1745 1746 if (value_update) { 1747 /* 1748 * update sensor's {max,min}-value. 1749 */ 1750 if (edata->flags & ENVSYS_FVALID_MAX) { 1751 error = sme_sensor_upint32(dict, "max-value", 1752 edata->value_max); 1753 if (error) 1754 return error; 1755 } 1756 1757 if (edata->flags & ENVSYS_FVALID_MIN) { 1758 error = sme_sensor_upint32(dict, "min-value", 1759 edata->value_min); 1760 if (error) 1761 return error; 1762 } 1763 1764 /* 1765 * update 'rpms' only for ENVSYS_SFANRPM sensors. 1766 */ 1767 if (edata->units == ENVSYS_SFANRPM) { 1768 error = sme_sensor_upuint32(dict, "rpms", edata->rpms); 1769 if (error) 1770 return error; 1771 } 1772 1773 /* 1774 * update 'rfact' only for ENVSYS_SVOLTS_[AD]C sensors. 1775 */ 1776 if (edata->units == ENVSYS_SVOLTS_AC || 1777 edata->units == ENVSYS_SVOLTS_DC) { 1778 error = sme_sensor_upint32(dict, "rfact", edata->rfact); 1779 if (error) 1780 return error; 1781 } 1782 } 1783 1784 /* 1785 * update 'drive-state' only for ENVSYS_DRIVE sensors. 1786 */ 1787 if (edata->units == ENVSYS_DRIVE) { 1788 sdt = sme_find_table_entry(SME_DESC_DRIVE_STATES, 1789 edata->value_cur); 1790 if (sdt == NULL) 1791 return EINVAL; 1792 error = sme_sensor_upstring(dict, "drive-state", sdt->desc); 1793 if (error) 1794 return error; 1795 } 1796 1797 /* 1798 * update 'battery-capacity' only for ENVSYS_BATTERY_CAPACITY 1799 * sensors. 1800 */ 1801 if (edata->units == ENVSYS_BATTERY_CAPACITY) { 1802 sdt = sme_find_table_entry(SME_DESC_BATTERY_CAPACITY, 1803 edata->value_cur); 1804 if (sdt == NULL) 1805 return EINVAL; 1806 error = sme_sensor_upstring(dict, "battery-capacity", 1807 sdt->desc); 1808 if (error) 1809 return error; 1810 } 1811 1812 return error; 1813 } 1814 1815 /* 1816 * sme_userset_dictionary: 1817 * 1818 * + Parse the userland dictionary and run the appropiate tasks 1819 * that were specified. 1820 */ 1821 int 1822 sme_userset_dictionary(struct sysmon_envsys *sme, prop_dictionary_t udict, 1823 prop_array_t array) 1824 { 1825 const struct sme_descr_entry *sdt; 1826 envsys_data_t *edata; 1827 prop_dictionary_t dict, tdict = NULL; 1828 prop_object_t obj, obj1, obj2, tobj = NULL; 1829 uint32_t props; 1830 uint64_t refresh_timo = 0; 1831 sysmon_envsys_lim_t lims; 1832 int i, error = 0; 1833 const char *blah; 1834 bool targetfound = false; 1835 1836 /* 1837 * The user wanted to change the refresh timeout value for this 1838 * device. 1839 * 1840 * Get the 'device-properties' object from the userland dictionary. 1841 */ 1842 obj = prop_dictionary_get(udict, "device-properties"); 1843 if (obj && prop_object_type(obj) == PROP_TYPE_DICTIONARY) { 1844 /* 1845 * Get the 'refresh-timeout' property for this device. 1846 */ 1847 obj1 = prop_dictionary_get(obj, "refresh-timeout"); 1848 if (obj1 && prop_object_type(obj1) == PROP_TYPE_NUMBER) { 1849 targetfound = true; 1850 refresh_timo = 1851 prop_number_unsigned_value(obj1); 1852 if (refresh_timo < 1) 1853 error = EINVAL; 1854 else { 1855 mutex_enter(&sme->sme_mtx); 1856 if (sme->sme_events_timeout != refresh_timo) { 1857 sme->sme_events_timeout = refresh_timo; 1858 sme_schedule_callout(sme); 1859 } 1860 mutex_exit(&sme->sme_mtx); 1861 } 1862 } 1863 return error; 1864 1865 } else if (!obj) { 1866 /* 1867 * Get sensor's index from userland dictionary. 1868 */ 1869 obj = prop_dictionary_get(udict, "index"); 1870 if (!obj) 1871 return EINVAL; 1872 if (prop_object_type(obj) != PROP_TYPE_STRING) { 1873 DPRINTF(("%s: 'index' not a string\n", __func__)); 1874 return EINVAL; 1875 } 1876 } else 1877 return EINVAL; 1878 1879 /* 1880 * Don't bother with locking when traversing the queue, 1881 * the device is already marked as busy; if a sensor 1882 * is going to be removed or added it will have to wait. 1883 */ 1884 TAILQ_FOREACH(edata, &sme->sme_sensors_list, sensors_head) { 1885 /* 1886 * Get a dictionary and check if it's our sensor by checking 1887 * at its index position. 1888 */ 1889 dict = prop_array_get(array, edata->sensor); 1890 obj1 = prop_dictionary_get(dict, "index"); 1891 1892 /* 1893 * is it our sensor? 1894 */ 1895 if (!prop_string_equals(obj1, obj)) 1896 continue; 1897 1898 props = 0; 1899 1900 /* 1901 * Check if a new description operation was 1902 * requested by the user and set new description. 1903 */ 1904 obj2 = prop_dictionary_get(udict, "description"); 1905 if (obj2 && prop_object_type(obj2) == PROP_TYPE_STRING) { 1906 targetfound = true; 1907 blah = prop_string_value(obj2); 1908 1909 /* 1910 * Check for duplicate description. 1911 */ 1912 for (i = 0; i < sme->sme_nsensors; i++) { 1913 if (i == edata->sensor) 1914 continue; 1915 tdict = prop_array_get(array, i); 1916 tobj = 1917 prop_dictionary_get(tdict, "description"); 1918 if (prop_string_equals(obj2, tobj)) { 1919 error = EEXIST; 1920 goto out; 1921 } 1922 } 1923 1924 /* 1925 * Update the object in dictionary. 1926 */ 1927 mutex_enter(&sme->sme_mtx); 1928 error = sme_sensor_upstring(dict, 1929 "description", 1930 blah); 1931 if (error) { 1932 mutex_exit(&sme->sme_mtx); 1933 goto out; 1934 } 1935 1936 DPRINTF(("%s: sensor%d changed desc to: %s\n", 1937 __func__, edata->sensor, blah)); 1938 edata->upropset |= PROP_DESC; 1939 mutex_exit(&sme->sme_mtx); 1940 } 1941 1942 /* 1943 * did the user want to change the rfact? 1944 */ 1945 obj2 = prop_dictionary_get(udict, "rfact"); 1946 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 1947 targetfound = true; 1948 if (edata->flags & ENVSYS_FCHANGERFACT) { 1949 mutex_enter(&sme->sme_mtx); 1950 edata->rfact = prop_number_signed_value(obj2); 1951 edata->upropset |= PROP_RFACT; 1952 mutex_exit(&sme->sme_mtx); 1953 DPRINTF(("%s: sensor%d changed rfact to %d\n", 1954 __func__, edata->sensor, edata->rfact)); 1955 } else { 1956 error = ENOTSUP; 1957 goto out; 1958 } 1959 } 1960 1961 sdt = sme_find_table_entry(SME_DESC_UNITS, edata->units); 1962 1963 /* 1964 * did the user want to set a critical capacity event? 1965 */ 1966 obj2 = prop_dictionary_get(udict, "critical-capacity"); 1967 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 1968 targetfound = true; 1969 lims.sel_critmin = prop_number_signed_value(obj2); 1970 props |= PROP_BATTCAP; 1971 } 1972 1973 /* 1974 * did the user want to set a warning capacity event? 1975 */ 1976 obj2 = prop_dictionary_get(udict, "warning-capacity"); 1977 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 1978 targetfound = true; 1979 lims.sel_warnmin = prop_number_signed_value(obj2); 1980 props |= PROP_BATTWARN; 1981 } 1982 1983 /* 1984 * did the user want to set a high capacity event? 1985 */ 1986 obj2 = prop_dictionary_get(udict, "high-capacity"); 1987 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 1988 targetfound = true; 1989 lims.sel_warnmin = prop_number_signed_value(obj2); 1990 props |= PROP_BATTHIGH; 1991 } 1992 1993 /* 1994 * did the user want to set a maximum capacity event? 1995 */ 1996 obj2 = prop_dictionary_get(udict, "maximum-capacity"); 1997 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 1998 targetfound = true; 1999 lims.sel_warnmin = prop_number_signed_value(obj2); 2000 props |= PROP_BATTMAX; 2001 } 2002 2003 /* 2004 * did the user want to set a critical max event? 2005 */ 2006 obj2 = prop_dictionary_get(udict, "critical-max"); 2007 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 2008 targetfound = true; 2009 lims.sel_critmax = prop_number_signed_value(obj2); 2010 props |= PROP_CRITMAX; 2011 } 2012 2013 /* 2014 * did the user want to set a warning max event? 2015 */ 2016 obj2 = prop_dictionary_get(udict, "warning-max"); 2017 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 2018 targetfound = true; 2019 lims.sel_warnmax = prop_number_signed_value(obj2); 2020 props |= PROP_WARNMAX; 2021 } 2022 2023 /* 2024 * did the user want to set a critical min event? 2025 */ 2026 obj2 = prop_dictionary_get(udict, "critical-min"); 2027 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 2028 targetfound = true; 2029 lims.sel_critmin = prop_number_signed_value(obj2); 2030 props |= PROP_CRITMIN; 2031 } 2032 2033 /* 2034 * did the user want to set a warning min event? 2035 */ 2036 obj2 = prop_dictionary_get(udict, "warning-min"); 2037 if (obj2 && prop_object_type(obj2) == PROP_TYPE_NUMBER) { 2038 targetfound = true; 2039 lims.sel_warnmin = prop_number_signed_value(obj2); 2040 props |= PROP_WARNMIN; 2041 } 2042 2043 if (props && (edata->flags & ENVSYS_FMONNOTSUPP) != 0) { 2044 error = ENOTSUP; 2045 goto out; 2046 } 2047 if (props || (edata->flags & ENVSYS_FHAS_ENTROPY) != 0) { 2048 error = sme_event_register(dict, edata, sme, &lims, 2049 props, 2050 (edata->flags & ENVSYS_FPERCENT)? 2051 PENVSYS_EVENT_CAPACITY: 2052 PENVSYS_EVENT_LIMITS, 2053 sdt->crittype); 2054 if (error == EEXIST) 2055 error = 0; 2056 if (error) 2057 goto out; 2058 } 2059 2060 /* 2061 * All objects in dictionary were processed. 2062 */ 2063 break; 2064 } 2065 2066 out: 2067 /* 2068 * invalid target? return the error. 2069 */ 2070 if (!targetfound) 2071 error = EINVAL; 2072 2073 return error; 2074 } 2075 2076 /* 2077 * + sysmon_envsys_foreach_sensor 2078 * 2079 * Walk through the devices' sensor lists and execute the callback. 2080 * If the callback returns false, the remainder of the current 2081 * device's sensors are skipped. 2082 */ 2083 void 2084 sysmon_envsys_foreach_sensor(sysmon_envsys_callback_t func, void *arg, 2085 bool refresh) 2086 { 2087 struct sysmon_envsys *sme; 2088 envsys_data_t *sensor; 2089 2090 mutex_enter(&sme_global_mtx); 2091 LIST_FOREACH(sme, &sysmon_envsys_list, sme_list) { 2092 2093 sysmon_envsys_acquire(sme, false); 2094 TAILQ_FOREACH(sensor, &sme->sme_sensors_list, sensors_head) { 2095 if (refresh) { 2096 mutex_enter(&sme->sme_mtx); 2097 sysmon_envsys_refresh_sensor(sme, sensor); 2098 mutex_exit(&sme->sme_mtx); 2099 } 2100 if (!(*func)(sme, sensor, arg)) 2101 break; 2102 } 2103 sysmon_envsys_release(sme, false); 2104 } 2105 mutex_exit(&sme_global_mtx); 2106 } 2107 2108 /* 2109 * Call the sensor's refresh function, and collect/stir entropy 2110 */ 2111 void 2112 sysmon_envsys_refresh_sensor(struct sysmon_envsys *sme, envsys_data_t *edata) 2113 { 2114 2115 if ((sme->sme_flags & SME_DISABLE_REFRESH) == 0) 2116 (*sme->sme_refresh)(sme, edata); 2117 2118 if (edata->flags & ENVSYS_FHAS_ENTROPY && 2119 edata->state != ENVSYS_SINVALID && 2120 edata->value_prev != edata->value_cur) 2121 rnd_add_uint32(&edata->rnd_src, edata->value_cur); 2122 edata->value_prev = edata->value_cur; 2123 } 2124 2125 static 2126 int 2127 sysmon_envsys_modcmd(modcmd_t cmd, void *arg) 2128 { 2129 int ret; 2130 2131 switch (cmd) { 2132 case MODULE_CMD_INIT: 2133 ret = sysmon_envsys_init(); 2134 break; 2135 2136 case MODULE_CMD_FINI: 2137 ret = sysmon_envsys_fini(); 2138 break; 2139 2140 case MODULE_CMD_STAT: 2141 default: 2142 ret = ENOTTY; 2143 } 2144 2145 return ret; 2146 } 2147