1 /* $NetBSD: scsipiconf.h,v 1.62 2001/10/14 20:31:24 bouyer Exp $ */ 2 3 /*- 4 * Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Charles M. Hannum; by Jason R. Thorpe of the Numerical Aerospace 9 * Simulation Facility, NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. All advertising materials mentioning features or use of this software 20 * must display the following acknowledgement: 21 * This product includes software developed by the NetBSD 22 * Foundation, Inc. and its contributors. 23 * 4. Neither the name of The NetBSD Foundation nor the names of its 24 * contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGE. 38 */ 39 40 /* 41 * Originally written by Julian Elischer (julian@tfs.com) 42 * for TRW Financial Systems for use under the MACH(2.5) operating system. 43 * 44 * TRW Financial Systems, in accordance with their agreement with Carnegie 45 * Mellon University, makes this software available to CMU to distribute 46 * or use in any manner that they see fit as long as this message is kept with 47 * the software. For this reason TFS also grants any other persons or 48 * organisations permission to use or modify this software. 49 * 50 * TFS supplies this software to be publicly redistributed 51 * on the understanding that TFS is not responsible for the correct 52 * functioning of this software in any circumstances. 53 * 54 * Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992 55 */ 56 57 #ifndef _DEV_SCSIPI_SCSIPICONF_H_ 58 #define _DEV_SCSIPI_SCSIPICONF_H_ 59 60 typedef int boolean; 61 62 #include <sys/callout.h> 63 #include <sys/queue.h> 64 #include <dev/scsipi/scsipi_debug.h> 65 66 struct buf; 67 struct proc; 68 struct device; 69 struct scsipi_channel; 70 struct scsipi_periph; 71 struct scsipi_xfer; 72 73 /* 74 * The following defines the scsipi_xfer queue. 75 */ 76 TAILQ_HEAD(scsipi_xfer_queue, scsipi_xfer); 77 78 struct scsipi_generic { 79 u_int8_t opcode; 80 u_int8_t bytes[15]; 81 }; 82 83 84 /* 85 * scsipi_async_event_t: 86 * 87 * Asynchronous events from the adapter to the mid-layer and 88 * peripherial. 89 * 90 * Arguments: 91 * 92 * ASYNC_EVENT_MAX_OPENINGS scsipi_max_openings * -- max 93 * openings, device specified in 94 * parameters 95 * 96 * ASYNC_EVENT_XFER_MODE scsipi_xfer_mode * -- xfer mode 97 * parameters changed for I_T Nexus 98 * ASYNC_EVENT_RESET NULL - channel has been reset 99 */ 100 typedef enum { 101 ASYNC_EVENT_MAX_OPENINGS, /* set max openings on periph */ 102 ASYNC_EVENT_XFER_MODE, /* xfer mode update for I_T */ 103 ASYNC_EVENT_RESET /* channel reset */ 104 } scsipi_async_event_t; 105 106 /* 107 * scsipi_max_openings: 108 * 109 * Argument for an ASYNC_EVENT_MAX_OPENINGS event. 110 */ 111 struct scsipi_max_openings { 112 int mo_target; /* openings are for this target... */ 113 int mo_lun; /* ...and this lun */ 114 int mo_openings; /* openings value */ 115 }; 116 117 /* 118 * scsipi_xfer_mode: 119 * 120 * Argument for an ASYNC_EVENT_XFER_MODE event. 121 */ 122 struct scsipi_xfer_mode { 123 int xm_target; /* target, for I_T Nexus */ 124 int xm_mode; /* PERIPH_CAP* bits */ 125 int xm_period; /* sync period */ 126 int xm_offset; /* sync offset */ 127 }; 128 129 130 /* 131 * scsipi_adapter_req_t: 132 * 133 * Requests that can be made of an adapter. 134 * 135 * Arguments: 136 * 137 * ADAPTER_REQ_RUN_XFER scsipi_xfer * -- the xfer which 138 * is to be run 139 * 140 * ADAPTER_REQ_GROW_RESOURCES no argument 141 * 142 * ADAPTER_REQ_SET_XFER_MODE scsipi_xfer_mode * -- set the xfer 143 * mode for the I_T Nexus according to 144 * this 145 */ 146 typedef enum { 147 ADAPTER_REQ_RUN_XFER, /* run a scsipi_xfer */ 148 ADAPTER_REQ_GROW_RESOURCES, /* grow xfer execution resources */ 149 ADAPTER_REQ_SET_XFER_MODE /* set xfer mode */ 150 } scsipi_adapter_req_t; 151 152 153 /* 154 * scsipi_periphsw: 155 * 156 * Callbacks into periph driver from midlayer. 157 * 158 * psw_error Called by the bustype's interpret-sense routine 159 * to do periph-specific sense handling. 160 * 161 * psw_start Called by midlayer to restart a device once 162 * more command openings become available. 163 * 164 * psw_async Called by midlayer when an asynchronous event 165 * from the adapter occurs. 166 * 167 * psw_done Called by the midlayer when an xfer has completed. 168 */ 169 struct scsipi_periphsw { 170 int (*psw_error) __P((struct scsipi_xfer *)); 171 void (*psw_start) __P((struct scsipi_periph *)); 172 int (*psw_async) __P((struct scsipi_periph *, 173 scsipi_async_event_t, void *)); 174 void (*psw_done) __P((struct scsipi_xfer *)); 175 }; 176 177 struct disk_parms; 178 struct scsipi_inquiry_pattern; 179 180 /* 181 * scsipi_adapter: 182 * 183 * This structure describes an instance of a SCSIPI adapter. 184 * 185 * Note that `adapt_openings' is used by (the common case of) adapters 186 * which have per-adapter resources. If an adapter's command resources 187 * are associated with a channel, the the `chan_openings' below will 188 * be used instead. 189 * 190 * Note that all adapter entry points take a pointer to a channel, 191 * as an adapter may have more than one channel, and the channel 192 * structure contains the channel number. 193 */ 194 struct scsipi_adapter { 195 struct device *adapt_dev; /* pointer to adapter's device */ 196 int adapt_nchannels; /* numnber of adapter channels */ 197 int adapt_refcnt; /* adapter's reference count */ 198 int adapt_openings; /* total # of command openings */ 199 int adapt_max_periph; /* max openings per periph */ 200 int adapt_flags; 201 202 void (*adapt_request) __P((struct scsipi_channel *, 203 scsipi_adapter_req_t, void *)); 204 void (*adapt_minphys) __P((struct buf *)); 205 int (*adapt_ioctl) __P((struct scsipi_channel *, u_long, 206 caddr_t, int, struct proc *)); 207 int (*adapt_enable) __P((struct device *, int)); 208 int (*adapt_getgeom) __P((struct scsipi_periph *, 209 struct disk_parms *, u_long)); 210 int (*adapt_accesschk) __P((struct scsipi_periph *, 211 struct scsipi_inquiry_pattern *)); 212 }; 213 214 /* adapt_flags */ 215 #define SCSIPI_ADAPT_POLL_ONLY 0x01 /* Adaptor can't do interrupts. */ 216 217 #define scsipi_adapter_minphys(chan, bp) \ 218 (*(chan)->chan_adapter->adapt_minphys)((bp)) 219 220 #define scsipi_adapter_request(chan, req, arg) \ 221 (*(chan)->chan_adapter->adapt_request)((chan), (req), (arg)) 222 223 #define scsipi_adapter_ioctl(chan, cmd, data, flag, p) \ 224 (*(chan)->chan_adapter->adapt_ioctl)((chan), (cmd), (data), (flag), (p)) 225 226 #define scsipi_adapter_enable(chan, enable) \ 227 (*(chan)->chan_adapt->adapt_enable)((chan), (enable)) 228 229 230 /* 231 * scsipi_bustype: 232 * 233 * This structure describes a SCSIPI bus type. 234 */ 235 struct scsipi_bustype { 236 int bustype_type; /* symbolic name of type */ 237 238 int (*bustype_cmd) __P((struct scsipi_periph *, 239 struct scsipi_generic *, int, void *, size_t, int, 240 int, struct buf *, int)); 241 int (*bustype_interpret_sense) __P((struct scsipi_xfer *)); 242 void (*bustype_printaddr) __P((struct scsipi_periph *)); 243 void (*bustype_kill_pending) __P((struct scsipi_periph *)); 244 }; 245 246 /* bustype_type */ 247 #define SCSIPI_BUSTYPE_SCSI 0 248 #define SCSIPI_BUSTYPE_ATAPI 1 249 250 251 /* 252 * scsipi_channel: 253 * 254 * This structure describes a single channel of a SCSIPI adapter. 255 * An adapter may have one or more channels. See the comment above 256 * regarding the resource counter. 257 */ 258 struct scsipi_channel { 259 u_int8_t type; /* XXX will die, compat with ata_atapi_attach for umass */ 260 #define BUS_SCSI 0 261 #define BUS_ATAPI 1 262 /*define BUS_ATA 2*/ 263 264 struct scsipi_adapter *chan_adapter; /* pointer to our adapter */ 265 266 const struct scsipi_bustype *chan_bustype; /* channel's bus type */ 267 268 /* 269 * Periphs for this channel. 2-dimensional array is dynamically 270 * allocated. 271 * 272 * XXX Consider a different data structure to save space. 273 */ 274 struct scsipi_periph ***chan_periphs; 275 276 int chan_channel; /* channel number */ 277 int chan_flags; /* channel flags */ 278 int chan_openings; /* number of command openings */ 279 int chan_max_periph; /* max openings per periph */ 280 281 int chan_ntargets; /* number of targets */ 282 int chan_nluns; /* number of luns */ 283 int chan_id; /* adapter's ID for this channel */ 284 285 int chan_defquirks; /* default device's quirks */ 286 287 struct proc *chan_thread; /* completion thread */ 288 int chan_tflags; /* flags for the completion thread */ 289 290 int chan_qfreeze; /* freeze count for queue */ 291 292 /* Job queue for this channel. */ 293 struct scsipi_xfer_queue chan_queue; 294 295 /* Completed (async) jobs. */ 296 struct scsipi_xfer_queue chan_complete; 297 298 /* callback we may have to call from completion thread */ 299 void (*chan_callback) __P((struct scsipi_channel *, void *)); 300 void *chan_callback_arg; 301 }; 302 303 /* chan_flags */ 304 #define SCSIPI_CHAN_OPENINGS 0x01 /* use chan_openings */ 305 #define SCSIPI_CHAN_CANGROW 0x02 /* channel can grow resources */ 306 #define SCSIPI_CHAN_NOSETTLE 0x04 /* don't wait for devices to settle */ 307 #define SCSIPI_CHAN_TACTIVE 0x08 /* completion thread is active */ 308 309 /* chan thread flags (chan_tflags) */ 310 #define SCSIPI_CHANT_SHUTDOWN 0x01 /* channel is shutting down */ 311 #define SCSIPI_CHANT_CALLBACK 0x02 /* has to call chan_callback() */ 312 #define SCSIPI_CHANT_KICK 0x04 /* need to run queues */ 313 #define SCSIPI_CHANT_GROWRES 0x08 /* call ADAPTER_REQ_GROW_RESOURCES */ 314 315 #define SCSIPI_CHAN_MAX_PERIPH(chan) \ 316 (((chan)->chan_flags & SCSIPI_CHAN_OPENINGS) ? \ 317 (chan)->chan_max_periph : (chan)->chan_adapter->adapt_max_periph) 318 319 320 #define scsipi_printaddr(periph) \ 321 (*(periph)->periph_channel->chan_bustype->bustype_printaddr)((periph)) 322 323 #define scsipi_periph_bustype(periph) \ 324 (periph)->periph_channel->chan_bustype->bustype_type 325 326 327 /* 328 * Number of tag words in a periph structure: 329 * 330 * n_tag_words = ((256 / NBBY) / sizeof(u_int32_t)) 331 */ 332 #define PERIPH_NTAGWORDS ((256 / 8) / sizeof(u_int32_t)) 333 334 335 /* 336 * scsipi_periph: 337 * 338 * This structure describes the path between a peripherial device 339 * and an adapter. It contains a pointer to the adapter channel 340 * which in turn contains a pointer to the adapter. 341 * 342 * XXX Given the way NetBSD's autoconfiguration works, this is ... 343 * XXX nasty. 344 * 345 * Well, it's a lot nicer than it used to be, but there could 346 * still be an improvement. 347 */ 348 struct scsipi_periph { 349 struct device *periph_dev; /* pointer to peripherial's device */ 350 struct scsipi_channel *periph_channel; /* channel we're connected to */ 351 352 const struct scsipi_periphsw *periph_switch; /* peripherial's entry 353 points */ 354 int periph_openings; /* max # of outstanding commands */ 355 int periph_active; /* current # of outstanding commands */ 356 int periph_sent; /* current # of commands sent to adapt*/ 357 358 int periph_mode; /* operation modes, CAP bits */ 359 int periph_period; /* sync period (factor) */ 360 int periph_offset; /* sync offset */ 361 362 /* 363 * Information gleaned from the inquiry data. 364 */ 365 u_int8_t periph_type; /* basic device type */ 366 int periph_cap; /* capabilities */ 367 int periph_quirks; /* device's quirks */ 368 369 int periph_flags; /* misc. flags */ 370 int periph_dbflags; /* debugging flags */ 371 372 int periph_target; /* target ID (drive # on ATAPI) */ 373 int periph_lun; /* LUN (not used on ATAPI) */ 374 375 int periph_version; /* ANSI SCSI version */ 376 377 int periph_qfreeze; /* queue freeze count */ 378 379 /* Bitmap of free command tags. */ 380 u_int32_t periph_freetags[PERIPH_NTAGWORDS]; 381 382 /* Pending scsipi_xfers on this peripherial. */ 383 struct scsipi_xfer_queue periph_xferq; 384 385 struct callout periph_callout; 386 387 /* xfer which has a pending CHECK_CONDITION */ 388 struct scsipi_xfer *periph_xscheck; 389 390 }; 391 392 /* 393 * Macro to return the current xfer mode of a periph. 394 */ 395 #define PERIPH_XFER_MODE(periph) \ 396 (((periph)->periph_flags & PERIPH_MODE_VALID) ? \ 397 (periph)->periph_mode : 0) 398 399 /* periph_cap */ 400 #define PERIPH_CAP_ANEC 0x0001 /* async event notification */ 401 #define PERIPH_CAP_TERMIOP 0x0002 /* terminate i/o proc. messages */ 402 #define PERIPH_CAP_RELADR 0x0004 /* relative addressing */ 403 #define PERIPH_CAP_WIDE32 0x0008 /* wide-32 transfers */ 404 #define PERIPH_CAP_WIDE16 0x0010 /* wide-16 transfers */ 405 /* XXX 0x0020 reserved for ATAPI_CFG_DRQ_MASK */ 406 /* XXX 0x0040 reserved for ATAPI_CFG_DRQ_MASK */ 407 #define PERIPH_CAP_SYNC 0x0080 /* synchronous transfers */ 408 #define PERIPH_CAP_LINKCMDS 0x0100 /* linked commands */ 409 #define PERIPH_CAP_TQING 0x0200 /* tagged queueing */ 410 #define PERIPH_CAP_SFTRESET 0x0400 /* soft RESET condition response */ 411 #define PERIPH_CAP_CMD16 0x0800 /* 16 byte commands (ATAPI) */ 412 413 /* periph_flags */ 414 #define PERIPH_REMOVABLE 0x0001 /* media is removable */ 415 #define PERIPH_MEDIA_LOADED 0x0002 /* media is loaded */ 416 #define PERIPH_WAITING 0x0004 /* process waiting for opening */ 417 #define PERIPH_OPEN 0x0008 /* device is open */ 418 #define PERIPH_WAITDRAIN 0x0010 /* waiting for pending xfers to drain */ 419 #define PERIPH_GROW_OPENINGS 0x0020 /* allow openings to grow */ 420 #define PERIPH_MODE_VALID 0x0040 /* periph_mode is valid */ 421 #define PERIPH_RECOVERING 0x0080 /* periph is recovering */ 422 #define PERIPH_RECOVERY_ACTIVE 0x0100 /* a recovery command is active */ 423 #define PERIPH_KEEP_LABEL 0x0200 /* retain label after 'full' close */ 424 #define PERIPH_SENSE 0x0400 /* periph has sense pending */ 425 #define PERIPH_UNTAG 0x0800 /* untagged command running */ 426 427 /* periph_quirks */ 428 #define PQUIRK_AUTOSAVE 0x00000001 /* do implicit SAVE POINTERS */ 429 #define PQUIRK_NOSYNC 0x00000002 /* does not grok SDTR */ 430 #define PQUIRK_NOWIDE 0x00000004 /* does not grok WDTR */ 431 #define PQUIRK_NOTAG 0x00000008 /* does not grok tagged cmds */ 432 #define PQUIRK_NOLUNS 0x00000010 /* DTWT with LUNs */ 433 #define PQUIRK_FORCELUNS 0x00000020 /* prehistoric device groks 434 LUNs */ 435 #define PQUIRK_NOMODESENSE 0x00000040 /* device doesn't do MODE SENSE 436 properly */ 437 #define PQUIRK_NOSTARTUNIT 0x00000080 /* do not issue START UNIT */ 438 #define PQUIRK_NOSYNCCACHE 0x00000100 /* do not issue SYNC CACHE */ 439 #define PQUIRK_CDROM 0x00000200 /* device is a CD-ROM, no 440 matter what else it claims */ 441 #define PQUIRK_LITTLETOC 0x00000400 /* audio TOC is little-endian */ 442 #define PQUIRK_NOCAPACITY 0x00000800 /* no READ CD CAPACITY */ 443 #define PQUIRK_NOTUR 0x00001000 /* no TEST UNIT READY */ 444 #define PQUIRK_NODOORLOCK 0x00002000 /* can't lock door */ 445 #define PQUIRK_NOSENSE 0x00004000 /* can't REQUEST SENSE */ 446 #define PQUIRK_ONLYBIG 0x00008000 /* only use SCSI_{R,W}_BIG */ 447 #define PQUIRK_BYTE5_ZERO 0x00010000 /* byte5 in capacity is wrong */ 448 #define PQUIRK_NO_FLEX_PAGE 0x00020000 /* does not support flex geom page */ 449 #define PQUIRK_NOBIGMODESENSE 0x00040000 /* has no big mode-sense op */ 450 451 452 /* 453 * Error values an adapter driver may return 454 */ 455 typedef enum { 456 XS_NOERROR, /* there is no error, (sense is invalid) */ 457 XS_SENSE, /* Check the returned sense for the error */ 458 XS_SHORTSENSE, /* Check the ATAPI sense for the error */ 459 XS_DRIVER_STUFFUP, /* Driver failed to perform operation */ 460 XS_RESOURCE_SHORTAGE, /* adapter resource shortage */ 461 XS_SELTIMEOUT, /* The device timed out.. turned off? */ 462 XS_TIMEOUT, /* The Timeout reported was caught by SW */ 463 XS_BUSY, /* The device busy, try again later? */ 464 XS_RESET, /* bus was reset; possible retry command */ 465 XS_REQUEUE /* requeue this command */ 466 } scsipi_xfer_result_t; 467 468 /* 469 * Each scsipi transaction is fully described by one of these structures 470 * It includes information about the source of the command and also the 471 * device and adapter for which the command is destined. 472 * 473 * Before the HBA is given this transaction, channel_q is the linkage on 474 * the related channel's chan_queue. 475 * 476 * When the this transaction is taken off the channel's chan_queue and 477 * the HBA's request entry point is called with this transaction, the 478 * HBA can use the channel_q tag for whatever it likes until it calls 479 * scsipi_done for this transaction, at which time it has to stop 480 * using channel_q. 481 * 482 * After scsipi_done is called with this transaction and if there was an 483 * error on it, channel_q then becomes the linkage on the related channel's 484 * chan_complete cqueue. 485 * 486 * The device_q member is maintained by the scsipi middle layer. When 487 * a device issues a command, the xfer is placed on that device's 488 * pending commands queue. When an xfer is done and freed, it is taken 489 * off the device's queue. This allows for a device to wait for all of 490 * its pending commands to complete. 491 */ 492 struct scsipi_xfer { 493 TAILQ_ENTRY(scsipi_xfer) channel_q; /* entry on channel queue */ 494 TAILQ_ENTRY(scsipi_xfer) device_q; /* device's pending xfers */ 495 struct callout xs_callout; /* callout for adapter use */ 496 int xs_control; /* control flags */ 497 __volatile int xs_status; /* status flags */ 498 struct scsipi_periph *xs_periph;/* peripherial doing the xfer */ 499 int xs_retries; /* the number of times to retry */ 500 int xs_requeuecnt; /* number of requeues */ 501 int timeout; /* in milliseconds */ 502 struct scsipi_generic *cmd; /* The scsipi command to execute */ 503 int cmdlen; /* how long it is */ 504 u_char *data; /* dma address OR a uio address */ 505 int datalen; /* data len (blank if uio) */ 506 int resid; /* how much buffer was not touched */ 507 scsipi_xfer_result_t error; /* an error value */ 508 struct buf *bp; /* If we need to associate with */ 509 /* a buf */ 510 union { 511 struct scsipi_sense_data scsi_sense; /* 32 bytes */ 512 u_int32_t atapi_sense; 513 } sense; 514 515 struct scsipi_xfer *xs_sensefor;/* we are requesting sense for this */ 516 /* xfer */ 517 518 u_int8_t status; /* SCSI status */ 519 520 /* 521 * Info for tagged command queueing. This may or may not 522 * be used by a given adapter driver. These are the same 523 * as the bytes in the tag message. 524 */ 525 u_int8_t xs_tag_type; /* tag type */ 526 u_int8_t xs_tag_id; /* tag ID */ 527 528 struct scsipi_generic cmdstore 529 __attribute__ ((aligned (4)));/* stash the command in here */ 530 }; 531 532 /* 533 * scsipi_xfer control flags 534 * 535 * To do: 536 * 537 * - figure out what to do with XS_CTL_ESCAPE 538 * 539 * - replace XS_CTL_URGENT with an `xs_priority' field? 540 */ 541 #define XS_CTL_NOSLEEP 0x00000001 /* don't sleep */ 542 #define XS_CTL_POLL 0x00000002 /* poll for completion */ 543 #define XS_CTL_DISCOVERY 0x00000004 /* doing device discovery */ 544 #define XS_CTL_ASYNC 0x00000008 /* command completes 545 asynchronously */ 546 #define XS_CTL_USERCMD 0x00000010 /* user issued command */ 547 #define XS_CTL_SILENT 0x00000020 /* don't print sense info */ 548 #define XS_CTL_IGNORE_NOT_READY 0x00000040 /* ignore NOT READY */ 549 #define XS_CTL_IGNORE_MEDIA_CHANGE \ 550 0x00000080 /* ignore media change */ 551 #define XS_CTL_IGNORE_ILLEGAL_REQUEST \ 552 0x00000100 /* ignore ILLEGAL REQUEST */ 553 #define XS_CTL_SILENT_NODEV 0x00000200 /* don't print sense info 554 if sense info is nodev */ 555 #define XS_CTL_RESET 0x00000400 /* reset the device */ 556 #define XS_CTL_DATA_UIO 0x00000800 /* xs_data points to uio */ 557 #define XS_CTL_DATA_IN 0x00001000 /* data coming into memory */ 558 #define XS_CTL_DATA_OUT 0x00002000 /* data going out of memory */ 559 #define XS_CTL_TARGET 0x00004000 /* target mode operation */ 560 #define XS_CTL_ESCAPE 0x00008000 /* escape operation */ 561 #define XS_CTL_URGENT 0x00010000 /* urgent (recovery) 562 operation */ 563 #define XS_CTL_SIMPLE_TAG 0x00020000 /* use a Simple Tag */ 564 #define XS_CTL_ORDERED_TAG 0x00040000 /* use an Ordered Tag */ 565 #define XS_CTL_HEAD_TAG 0x00080000 /* use a Head of Queue Tag */ 566 #define XS_CTL_THAW_PERIPH 0x00100000 /* thaw periph once enqueued */ 567 #define XS_CTL_FREEZE_PERIPH 0x00200000 /* freeze periph when done */ 568 #define XS_CTL_DATA_ONSTACK 0x00400000 /* data is alloc'ed on stack */ 569 #define XS_CTL_REQSENSE 0x00800000 /* xfer is a request sense */ 570 571 #define XS_CTL_TAGMASK (XS_CTL_SIMPLE_TAG|XS_CTL_ORDERED_TAG|XS_CTL_HEAD_TAG) 572 573 #define XS_CTL_TAGTYPE(xs) ((xs)->xs_control & XS_CTL_TAGMASK) 574 575 /* 576 * scsipi_xfer status flags 577 */ 578 #define XS_STS_DONE 0x00000001 /* scsipi_xfer is done */ 579 #define XS_STS_PRIVATE 0xf0000000 /* reserved for HBA's use */ 580 581 /* 582 * This describes matching information for scsipi_inqmatch(). The more things 583 * match, the higher the configuration priority. 584 */ 585 struct scsipi_inquiry_pattern { 586 u_int8_t type; 587 boolean removable; 588 char *vendor; 589 char *product; 590 char *revision; 591 }; 592 593 /* 594 * This is used to pass information from the high-level configuration code 595 * to the device-specific drivers. 596 */ 597 struct scsipibus_attach_args { 598 struct scsipi_periph *sa_periph; 599 struct scsipi_inquiry_pattern sa_inqbuf; 600 struct scsipi_inquiry_data *sa_inqptr; 601 union { /* bus-type specific infos */ 602 u_int8_t scsi_version; /* SCSI version */ 603 } scsipi_info; 604 }; 605 606 /* 607 * this describes a quirk entry 608 */ 609 struct scsi_quirk_inquiry_pattern { 610 struct scsipi_inquiry_pattern pattern; 611 int quirks; 612 }; 613 614 /* 615 * Default number of retries, used for generic routines. 616 */ 617 #define SCSIPIRETRIES 4 618 619 620 #ifdef _KERNEL 621 void scsipi_init __P((void)); 622 int scsipi_command __P((struct scsipi_periph *, 623 struct scsipi_generic *, int, u_char *, int, 624 int, int, struct buf *, int)); 625 void scsipi_create_completion_thread __P((void *)); 626 caddr_t scsipi_inqmatch __P((struct scsipi_inquiry_pattern *, caddr_t, 627 int, int, int *)); 628 char *scsipi_dtype __P((int)); 629 void scsipi_strvis __P((u_char *, int, u_char *, int)); 630 int scsipi_execute_xs __P((struct scsipi_xfer *)); 631 u_long scsipi_size __P((struct scsipi_periph *, int)); 632 int scsipi_test_unit_ready __P((struct scsipi_periph *, int)); 633 int scsipi_prevent __P((struct scsipi_periph *, int, int)); 634 int scsipi_inquire __P((struct scsipi_periph *, 635 struct scsipi_inquiry_data *, int)); 636 int scsipi_mode_select __P((struct scsipi_periph *, int, 637 struct scsipi_mode_header *, int, int, int, int)); 638 int scsipi_mode_select_big __P((struct scsipi_periph *, int, 639 struct scsipi_mode_header_big *, int, int, int, int)); 640 int scsipi_mode_sense __P((struct scsipi_periph *, int, int, 641 struct scsipi_mode_header *, int, int, int, int)); 642 int scsipi_mode_sense_big __P((struct scsipi_periph *, int, int, 643 struct scsipi_mode_header_big *, int, int, int, int)); 644 int scsipi_start __P((struct scsipi_periph *, int, int)); 645 void scsipi_done __P((struct scsipi_xfer *)); 646 void scsipi_user_done __P((struct scsipi_xfer *)); 647 int scsipi_interpret_sense __P((struct scsipi_xfer *)); 648 void scsipi_wait_drain __P((struct scsipi_periph *)); 649 void scsipi_kill_pending __P((struct scsipi_periph *)); 650 struct scsipi_periph *scsipi_alloc_periph __P((int)); 651 #ifdef SCSIVERBOSE 652 void scsipi_print_sense __P((struct scsipi_xfer *, int)); 653 void scsipi_print_sense_data __P((struct scsipi_sense_data *, int)); 654 char *scsipi_decode_sense __P((void *, int)); 655 #endif 656 int scsipi_thread_call_callback __P((struct scsipi_channel *, 657 void (*callback) __P((struct scsipi_channel *, void *)), 658 void *)); 659 void scsipi_async_event __P((struct scsipi_channel *, 660 scsipi_async_event_t, void *)); 661 int scsipi_do_ioctl __P((struct scsipi_periph *, dev_t, u_long, caddr_t, 662 int, struct proc *)); 663 664 void scsipi_print_xfer_mode __P((struct scsipi_periph *)); 665 void scsipi_set_xfer_mode __P((struct scsipi_channel *, int, int)); 666 667 int scsipi_channel_init __P((struct scsipi_channel *)); 668 void scsipi_channel_shutdown __P((struct scsipi_channel *)); 669 670 void scsipi_insert_periph __P((struct scsipi_channel *, 671 struct scsipi_periph *)); 672 void scsipi_remove_periph __P((struct scsipi_channel *, 673 struct scsipi_periph *)); 674 struct scsipi_periph *scsipi_lookup_periph __P((struct scsipi_channel *, 675 int, int)); 676 int scsipi_target_detach __P((struct scsipi_channel *, int, int, int)); 677 678 int scsipi_adapter_addref __P((struct scsipi_adapter *)); 679 void scsipi_adapter_delref __P((struct scsipi_adapter *)); 680 681 void scsipi_channel_freeze __P((struct scsipi_channel *, int)); 682 void scsipi_channel_thaw __P((struct scsipi_channel *, int)); 683 void scsipi_channel_timed_thaw __P((void *)); 684 685 void scsipi_periph_freeze __P((struct scsipi_periph *, int)); 686 void scsipi_periph_thaw __P((struct scsipi_periph *, int)); 687 void scsipi_periph_timed_thaw __P((void *)); 688 689 int scsipi_sync_period_to_factor __P((int)); 690 int scsipi_sync_factor_to_period __P((int)); 691 int scsipi_sync_factor_to_freq __P((int)); 692 693 void show_scsipi_xs __P((struct scsipi_xfer *)); 694 void show_scsipi_cmd __P((struct scsipi_xfer *)); 695 void show_mem __P((u_char *, int)); 696 #endif /* _KERNEL */ 697 698 static __inline void _lto2b __P((u_int32_t val, u_int8_t *bytes)) 699 __attribute__ ((unused)); 700 static __inline void _lto3b __P((u_int32_t val, u_int8_t *bytes)) 701 __attribute__ ((unused)); 702 static __inline void _lto4b __P((u_int32_t val, u_int8_t *bytes)) 703 __attribute__ ((unused)); 704 static __inline u_int32_t _2btol __P((const u_int8_t *bytes)) 705 __attribute__ ((unused)); 706 static __inline u_int32_t _3btol __P((const u_int8_t *bytes)) 707 __attribute__ ((unused)); 708 static __inline u_int32_t _4btol __P((const u_int8_t *bytes)) 709 __attribute__ ((unused)); 710 711 static __inline void _lto2l __P((u_int32_t val, u_int8_t *bytes)) 712 __attribute__ ((unused)); 713 static __inline void _lto3l __P((u_int32_t val, u_int8_t *bytes)) 714 __attribute__ ((unused)); 715 static __inline void _lto4l __P((u_int32_t val, u_int8_t *bytes)) 716 __attribute__ ((unused)); 717 static __inline u_int32_t _2ltol __P((const u_int8_t *bytes)) 718 __attribute__ ((unused)); 719 static __inline u_int32_t _3ltol __P((const u_int8_t *bytes)) 720 __attribute__ ((unused)); 721 static __inline u_int32_t _4ltol __P((const u_int8_t *bytes)) 722 __attribute__ ((unused)); 723 724 static __inline void 725 _lto2b(val, bytes) 726 u_int32_t val; 727 u_int8_t *bytes; 728 { 729 730 bytes[0] = (val >> 8) & 0xff; 731 bytes[1] = val & 0xff; 732 } 733 734 static __inline void 735 _lto3b(val, bytes) 736 u_int32_t val; 737 u_int8_t *bytes; 738 { 739 740 bytes[0] = (val >> 16) & 0xff; 741 bytes[1] = (val >> 8) & 0xff; 742 bytes[2] = val & 0xff; 743 } 744 745 static __inline void 746 _lto4b(val, bytes) 747 u_int32_t val; 748 u_int8_t *bytes; 749 { 750 751 bytes[0] = (val >> 24) & 0xff; 752 bytes[1] = (val >> 16) & 0xff; 753 bytes[2] = (val >> 8) & 0xff; 754 bytes[3] = val & 0xff; 755 } 756 757 static __inline u_int32_t 758 _2btol(bytes) 759 const u_int8_t *bytes; 760 { 761 u_int32_t rv; 762 763 rv = (bytes[0] << 8) | 764 bytes[1]; 765 return (rv); 766 } 767 768 static __inline u_int32_t 769 _3btol(bytes) 770 const u_int8_t *bytes; 771 { 772 u_int32_t rv; 773 774 rv = (bytes[0] << 16) | 775 (bytes[1] << 8) | 776 bytes[2]; 777 return (rv); 778 } 779 780 static __inline u_int32_t 781 _4btol(bytes) 782 const u_int8_t *bytes; 783 { 784 u_int32_t rv; 785 786 rv = (bytes[0] << 24) | 787 (bytes[1] << 16) | 788 (bytes[2] << 8) | 789 bytes[3]; 790 return (rv); 791 } 792 793 static __inline void 794 _lto2l(val, bytes) 795 u_int32_t val; 796 u_int8_t *bytes; 797 { 798 799 bytes[0] = val & 0xff; 800 bytes[1] = (val >> 8) & 0xff; 801 } 802 803 static __inline void 804 _lto3l(val, bytes) 805 u_int32_t val; 806 u_int8_t *bytes; 807 { 808 809 bytes[0] = val & 0xff; 810 bytes[1] = (val >> 8) & 0xff; 811 bytes[2] = (val >> 16) & 0xff; 812 } 813 814 static __inline void 815 _lto4l(val, bytes) 816 u_int32_t val; 817 u_int8_t *bytes; 818 { 819 820 bytes[0] = val & 0xff; 821 bytes[1] = (val >> 8) & 0xff; 822 bytes[2] = (val >> 16) & 0xff; 823 bytes[3] = (val >> 24) & 0xff; 824 } 825 826 static __inline u_int32_t 827 _2ltol(bytes) 828 const u_int8_t *bytes; 829 { 830 u_int32_t rv; 831 832 rv = bytes[0] | 833 (bytes[1] << 8); 834 return (rv); 835 } 836 837 static __inline u_int32_t 838 _3ltol(bytes) 839 const u_int8_t *bytes; 840 { 841 u_int32_t rv; 842 843 rv = bytes[0] | 844 (bytes[1] << 8) | 845 (bytes[2] << 16); 846 return (rv); 847 } 848 849 static __inline u_int32_t 850 _4ltol(bytes) 851 const u_int8_t *bytes; 852 { 853 u_int32_t rv; 854 855 rv = bytes[0] | 856 (bytes[1] << 8) | 857 (bytes[2] << 16) | 858 (bytes[3] << 24); 859 return (rv); 860 } 861 862 #endif /* _DEV_SCSIPI_SCSIPICONF_H_ */ 863