1 /* $NetBSD: atapiconf.h,v 1.3 1997/10/01 01:18:42 enami Exp $ */ 2 3 /* 4 * Copyright (c) 1996 Manuel Bouyer. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Manuel Bouyer. 17 * 4. The name of the author may not be used to endorse or promote products 18 * derived from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 21 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 22 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 23 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 26 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 27 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 #ifndef SCSI_ATAPICONF_H 33 #define SCSI_ATAPICONF_H 34 35 #include <dev/scsipi/scsipiconf.h> 36 37 #undef ATAPI_DEBUG 38 #undef ATAPI_DEBUG2 39 #undef ATAPI_DEBUG_PROBE 40 #undef ATAPI_DEBUG_WDC 41 42 struct atapi_identify { 43 struct config_s { 44 u_int8_t cmd_drq_rem; 45 #define ATAPI_PACKET_SIZE_MASK 0x03 46 #define ATAPI_PACKET_SIZE_12 0x00 47 #define ATAPI_PACKET_SIZE_16 0x01 48 49 #define ATAPI_DRQ_MASK 0x60 50 #define ATAPI_MICROPROCESSOR_DRQ 0x00 51 #define ATAPI_INTERRUPT_DRQ 0x20 52 #define ATAPI_ACCELERATED_DRQ 0x40 53 54 #define ATAPI_REMOVABLE 0x80 55 56 u_int8_t device_type; 57 #define ATAPI_DEVICE_TYPE_MASK 0x1f 58 #define ATAPI_DEVICE_TYPE_DAD 0x00 /* direct access device */ 59 /* 0x1-0x4 reserved */ 60 #define ATAPI_DEVICE_TYPE_CD 0x05 /* CD-ROM */ 61 /* 0x6 reserved */ 62 #define ATAPI_DEVICE_TYPE_OMD 0x07 /* optical memory device */ 63 /* 0x8-0x1e reserved */ 64 #define ATAPI_DEVICE_TYPE_UNKNOWN 0x1f 65 66 #define ATAPI_GC_PROTOCOL_MASK 0xc0 /* mask of protocol bits */ 67 /* 0x00 and 0x01 are ATA */ 68 #define ATAPI_GC_PROTO_TYPE_ATAPI 0x80 69 #define ATAPI_GC_PROTO_TYPE_RESERVED 0xc0 70 } config; /* general configuration */ 71 72 u_int8_t cylinders[2]; 73 u_int8_t reserved1[2]; 74 u_int8_t heads[2]; 75 u_int8_t unf_bytes_per_track[2]; 76 u_int8_t unf_bytes_per_sector[2]; 77 u_int8_t sectors_per_track[2]; 78 u_int8_t reserved2[6]; 79 char serial_number[20]; 80 u_int8_t buffer_type[2]; 81 u_int8_t buffer_size[2]; 82 u_int8_t ECC_bytes_available[2]; 83 char firmware_revision[8]; 84 char model[40]; 85 u_int8_t sector_count[2]; 86 u_int8_t double_word[2]; /* == 0 for CD-ROMs */ 87 88 struct capabilities_s { 89 u_int8_t vendor; 90 u_int8_t capflags; 91 #define ATAPI_CAP_DMA 0x01 /* DMA supported */ 92 #define ATAPI_CAP_LBA 0x02 /* LBA supported */ 93 #define ATAPI_IORDY_DISABLE 0x04 /* IORDY can be disabled */ 94 #define ATAPI_IORDY 0x08 /* IORDY supported */ 95 } capabilities; 96 97 u_int8_t reserved3[2]; 98 u_int8_t PIO_cycle_timing[2]; 99 u_int8_t DMA_cycle_timing[2]; 100 u_int8_t validity[2]; /* of words 54-58, 64-70 in this table */ 101 102 #define ATAPI_VALID_FIRST 0x0 /* == 1 => words 54-58 are valid */ 103 #define ATAPI_VALID_SECOND 0x1 /* == 1 => words 64-70 are valid */ 104 105 u_int8_t current_chs[6]; /* cylinder/head/sector */ 106 u_int8_t current_capacity[4]; 107 u_int8_t reserved4[2]; 108 u_int8_t user_addressable_sectors[4]; 109 u_int8_t singleword_DMA_mode[2]; 110 111 #define ATAPI_SW_DMA_MODE_AVAIL 0x00ff /* Mode 0 is supported */ 112 #define ATAPI_SW_DMA_MODE_ACTIVE 0xff00 /* which mode is active */ 113 114 u_int8_t multiword_DMA_mode[2]; 115 116 #define ATAPI_MW_DMA_MODE_AVAIL 0x00ff /* Mode 0 is supported */ 117 #define ATAPI_MW_DMA_MODE_ACTIVE 0xff00 /* which mode is active */ 118 119 u_int8_t enhanced_PIO_mode[2]; 120 121 #define ATAPI_ENHANCED_PIO_AVAIL 0x0001 /* PIO Mode 3 is supported */ 122 123 u_int8_t blind_PIO_minimum_cycles[2]; 124 u_int8_t mw_dma_tct[2]; /* multi-word DMA transfer cycle time */ 125 u_int8_t min_PIO_tct_no_flow_control[2]; 126 u_int8_t min_PIO_tct_with_flow_control[2]; 127 u_int8_t reserved5[4]; 128 u_int8_t reserved6[114]; 129 u_int8_t vendor[64]; /* vendor unique */ 130 u_int8_t reserved7[192]; 131 }; 132 133 struct atapibus_attach_args { 134 struct scsipi_link *sa_sc_link; 135 struct atapi_identify *sa_inqbuf; 136 }; 137 138 int wdc_atapi_get_params __P((struct scsipi_link *, u_int8_t, 139 struct atapi_identify *)); 140 void atapi_print_addr __P((struct scsipi_link *)); 141 int atapi_interpret_sense __P((struct scsipi_xfer *)); 142 int atapi_scsipi_cmd __P((struct scsipi_link *, struct scsipi_generic *, 143 int, u_char *, int, int, int, struct buf *, int)); 144 #endif /* SCSI_ATAPICONF_H */ 145