1 /* $NetBSD: atapi_base.c,v 1.19 2004/03/10 21:57:31 bouyer Exp $ */ 2 3 /*- 4 * Copyright (c) 1998, 1999 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Charles M. Hannum; by Jason R. Thorpe of the Numerical Aerospace 9 * Simulation Facility, NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. All advertising materials mentioning features or use of this software 20 * must display the following acknowledgement: 21 * This product includes software developed by the NetBSD 22 * Foundation, Inc. and its contributors. 23 * 4. Neither the name of The NetBSD Foundation nor the names of its 24 * contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGE. 38 */ 39 40 #include <sys/cdefs.h> 41 __KERNEL_RCSID(0, "$NetBSD: atapi_base.c,v 1.19 2004/03/10 21:57:31 bouyer Exp $"); 42 43 #include <sys/param.h> 44 #include <sys/systm.h> 45 #include <sys/kernel.h> 46 #include <sys/buf.h> 47 #include <sys/uio.h> 48 #include <sys/malloc.h> 49 #include <sys/errno.h> 50 #include <sys/device.h> 51 #include <sys/proc.h> 52 53 #include <dev/scsipi/scsipi_all.h> 54 #include <dev/scsipi/scsipiconf.h> 55 #include <dev/scsipi/atapiconf.h> 56 #include <dev/scsipi/scsipi_base.h> 57 58 /* 59 * Look at the returned sense and act on the error, determining 60 * the unix error number to pass back. (0 = report no error) 61 * 62 * THIS IS THE DEFAULT ERROR HANDLER 63 */ 64 int 65 atapi_interpret_sense(xs) 66 struct scsipi_xfer *xs; 67 { 68 struct scsipi_periph *periph = xs->xs_periph; 69 int key, error; 70 char *msg = NULL; 71 72 /* 73 * If the device has it's own error handler, call it first. 74 * If it returns a legit error value, return that, otherwise 75 * it wants us to continue with normal error processing. 76 */ 77 if (periph->periph_switch->psw_error != NULL) { 78 SC_DEBUG(periph, SCSIPI_DB2, 79 ("calling private err_handler()\n")); 80 error = (*periph->periph_switch->psw_error)(xs); 81 if (error != EJUSTRETURN) 82 return (error); 83 } 84 /* 85 * otherwise use the default, call the generic sense handler if we have 86 * more than the sense key 87 */ 88 if (xs->error == XS_SENSE) 89 return (scsipi_interpret_sense(xs)); 90 91 key = (xs->sense.atapi_sense & 0xf0) >> 4; 92 switch (key) { 93 case SKEY_RECOVERED_ERROR: 94 msg = "soft error (corrected)"; 95 case SKEY_NO_SENSE: 96 if (xs->resid == xs->datalen) 97 xs->resid = 0; /* not short read */ 98 error = 0; 99 break; 100 case SKEY_NOT_READY: 101 if ((periph->periph_flags & PERIPH_REMOVABLE) != 0) 102 periph->periph_flags &= ~PERIPH_MEDIA_LOADED; 103 if ((xs->xs_control & XS_CTL_IGNORE_NOT_READY) != 0) 104 return (0); 105 if ((xs->xs_control & XS_CTL_SILENT) != 0) 106 return (EIO); 107 msg = "not ready"; 108 error = EIO; 109 break; 110 case SKEY_MEDIUM_ERROR: /* MEDIUM ERROR */ 111 msg = "medium error"; 112 error = EIO; 113 break; 114 case SKEY_HARDWARE_ERROR: 115 msg = "non-media hardware failure"; 116 error = EIO; 117 break; 118 case SKEY_ILLEGAL_REQUEST: 119 if ((xs->xs_control & 120 XS_CTL_IGNORE_ILLEGAL_REQUEST) != 0) 121 return (0); 122 if ((xs->xs_control & XS_CTL_SILENT) != 0) 123 return (EIO); 124 msg = "illegal request"; 125 error = EINVAL; 126 break; 127 case SKEY_UNIT_ATTENTION: 128 if ((periph->periph_flags & PERIPH_REMOVABLE) != 0) 129 periph->periph_flags &= ~PERIPH_MEDIA_LOADED; 130 if ((xs->xs_control & 131 XS_CTL_IGNORE_MEDIA_CHANGE) != 0 || 132 /* XXX Should reupload any transient state. */ 133 (periph->periph_flags & PERIPH_REMOVABLE) == 0) 134 return (ERESTART); 135 if ((xs->xs_control & XS_CTL_SILENT) != 0) 136 return (EIO); 137 msg = "unit attention"; 138 error = EIO; 139 break; 140 case SKEY_WRITE_PROTECT: 141 msg = "readonly device"; 142 error = EROFS; 143 break; 144 case SKEY_ABORTED_COMMAND: 145 msg = "command aborted"; 146 if (xs->xs_retries != 0) { 147 xs->xs_retries--; 148 error = ERESTART; 149 } else 150 error = EIO; 151 break; 152 default: 153 error = EIO; 154 break; 155 } 156 157 if (!key) { 158 if (xs->sense.atapi_sense & 0x01) { 159 /* Illegal length indication */ 160 msg = "ATA illegal length indication"; 161 error = EIO; 162 } 163 if (xs->sense.atapi_sense & 0x02) { /* vol overflow */ 164 msg = "ATA volume overflow"; 165 error = ENOSPC; 166 } 167 if (xs->sense.atapi_sense & 0x04) { /* Aborted command */ 168 msg = "ATA command aborted"; 169 if (xs->xs_retries != 0) { 170 xs->xs_retries--; 171 error = ERESTART; 172 } else 173 error = EIO; 174 } 175 } 176 if (msg) { 177 scsipi_printaddr(periph); 178 printf("%s\n", msg); 179 } else { 180 if (error) { 181 scsipi_printaddr(periph); 182 printf("unknown error code %d\n", 183 xs->sense.atapi_sense); 184 } 185 } 186 187 return (error); 188 } 189 190 /* 191 * Utility routines often used in SCSI stuff 192 */ 193 194 195 /* 196 * Print out the scsi_link structure's address info. 197 */ 198 void 199 atapi_print_addr(periph) 200 struct scsipi_periph *periph; 201 { 202 struct scsipi_channel *chan = periph->periph_channel; 203 struct scsipi_adapter *adapt = chan->chan_adapter; 204 205 printf("%s(%s:%d:%d): ", periph->periph_dev != NULL ? 206 periph->periph_dev->dv_xname : "probe", 207 adapt->adapt_dev->dv_xname, 208 chan->chan_channel, periph->periph_target); 209 } 210 211 /* 212 * ask the atapi driver to perform a command for us. 213 * tell it where to read/write the data, and how 214 * long the data is supposed to be. If we have a buf 215 * to associate with the transfer, we need that too. 216 */ 217 int 218 atapi_scsipi_cmd(periph, scsipi_cmd, cmdlen, data, datalen, 219 retries, timeout, bp, flags) 220 struct scsipi_periph *periph; 221 struct scsipi_generic *scsipi_cmd; 222 int cmdlen; 223 void *data; 224 size_t datalen; 225 int retries; 226 int timeout; 227 struct buf *bp; 228 int flags; 229 { 230 struct scsipi_xfer *xs; 231 int error, s; 232 233 SC_DEBUG(periph, SCSIPI_DB2, ("atapi_cmd\n")); 234 235 #ifdef DIAGNOSTIC 236 if (bp != NULL && (flags & XS_CTL_ASYNC) == 0) 237 panic("atapi_scsipi_cmd: buffer without async"); 238 #endif 239 240 if ((xs = scsipi_make_xs(periph, scsipi_cmd, cmdlen, data, 241 datalen, retries, timeout, bp, flags)) == NULL) { 242 if (bp != NULL) { 243 s = splbio(); 244 bp->b_flags |= B_ERROR; 245 bp->b_error = ENOMEM; 246 biodone(bp); 247 splx(s); 248 } 249 return (ENOMEM); 250 } 251 252 xs->cmdlen = (periph->periph_cap & PERIPH_CAP_CMD16) ? 16 : 12; 253 254 if ((error = scsipi_execute_xs(xs)) == EJUSTRETURN) 255 return (0); 256 return (error); 257 } 258