xref: /netbsd-src/sys/dev/sbus/p9100reg.h (revision f81322cf185a4db50f71fcf7701f20198272620e)
1 /*	$NetBSD: p9100reg.h,v 1.3 2006/03/06 21:53:17 macallan Exp $ */
2 
3 /*-
4  * Copyright (c) 1998 The NetBSD Foundation, Inc.
5  * All rights reserved.
6  *
7  * This code is derived from software contributed to The NetBSD Foundation
8  * by Matt Thomas.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. All advertising materials mentioning features or use of this software
19  *    must display the following acknowledgement:
20  *        This product includes software developed by the NetBSD
21  *        Foundation, Inc. and its contributors.
22  * 4. Neither the name of The NetBSD Foundation nor the names of its
23  *    contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
27  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
28  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
30  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36  * POSSIBILITY OF SUCH DAMAGE.
37  */
38 
39 
40 #ifndef P9100_REG_H
41 #define P9100_REG_H
42 
43 /* The Tadpole 3GX Technical Reference Manual lies.  The ramdac registers
44  * are map in 4 byte increments, not 8.
45  */
46 #define	SCRN_RPNT_CTL_1	0x0138	/* Screen Respaint Timing Control 1 */
47 #define	VIDEO_ENABLED	0x00000020
48 #define	PWRUP_CNFG	0x0194	/* Power Up Configuration */
49 #define	DAC_CMAP_WRIDX	0x0200	/* IBM RGB528 Palette Address (Write) */
50 #define	DAC_CMAP_DATA	0x0204	/* IBM RGB528 Palette Data */
51 #define	DAC_PXL_MASK	0x0208	/* IBM RGB528 Pixel Mask */
52 #define	DAC_CMAP_RDIDX	0x020c	/* IBM RGB528 Palette Address (Read) */
53 #define	DAC_INDX_LO	0x0210	/* IBM RGB528 Index Low */
54 #define	DAC_INDX_HI	0x0214	/* IBM RGB528 Index High */
55 #define	DAC_INDX_DATA	0x0218	/* IBM RGB528 Index Data (Indexed Registers) */
56 #define	DAC_INDX_CTL	0x021c	/* IBM RGB528 Index Control */
57 	#define DAC_INDX_AUTOINCR	0x01
58 
59 #define DAC_VERSION	0x01
60 #define DAC_POWER	0x05
61 	#define DAC_POWER_SCLK_DISABLE	0x10
62 	#define DAC_POWER_DDOT_DISABLE	0x08
63 	#define DAC_POWER_SYNC_DISABLE	0x04
64 	/* Disable internal DAC clock */
65 	#define DAC_POWER_ICLK_DISABLE	0x02
66 	/* Disable internal DAC power */
67 	#define DAC_POWER_IPWR_DISABLE	0x01
68 
69 #define DAC_CURSOR_CTL	0x30
70 	#define DAC_CURSOR_OFF	0x00
71 	#define DAC_CURSOR_WIN	0x02
72 	#define DAC_CURSOR_X11	0x03
73 	#define DAC_CURSOR_64	0x04	/* clear for 32x32 cursor */
74 #define DAC_CURSOR_X		0x31	/* 8-low, 8-high */
75 #define DAC_CURSOR_Y		0x33	/* 8-low, 8-high */
76 #define DAC_CURSOR_HOT_X	0x35	/* hotspot */
77 #define DAC_CURSOR_HOT_Y	0x36
78 #define DAC_CURSOR_COL_1	0x40	/* red. green and blue */
79 #define DAC_CURSOR_COL_2	0x43
80 #define DAC_CURSOR_COL_3	0x46
81 #define DAC_PIX_PLL		0x8e
82 #define DAC_CURSOR_DATA		0x100
83 
84 #define ENGINE_STATUS	0x2000	/* drawing engine status register */
85 	#define BLITTER_BUSY	0x80000000
86 	#define ENGINE_BUSY	0x40000000
87 #define COMMAND_BLIT		0x2004
88 #define COMMAND_QUAD		0x2008
89 /* pixel data for monochrome colour expansion */
90 #define PIXEL_1			0x2080
91 /* apparently bits 2-6 control how many pixels we write - n+1 */
92 
93 /* drawing engine registers */
94 #define COORD_INDEX			0x218c
95 #define WINDOW_OFFSET		0x2190
96 
97 #define FOREGROUND_COLOR	0x2200
98 #define BACKGROUND_COLOR	0x2204
99 #define PLANE_MASK			0x2208
100 #define DRAW_MODE			0x220c
101 #define PATTERN_ORIGIN_X	0x2210
102 #define PATTERN_ORIGIN_Y	0x2214
103 #define RASTER_OP			0x2218
104 	#define ROP_NO_SOLID		0x02000	/* if set use pattern instead of color for quad operations */
105 	#define ROP_2BIT_PATTERN	0x04000 /* 4-colour pattern instead of mono */
106 	#define ROP_PIX1_TRANS		0x08000	/* transparent background in mono */
107 	#define ROP_OVERSIZE		0x10000
108 	#define ROP_PATTERN			0x20000		/* the manual says pattern enable */
109 	#define ROP_TRANS			0x20000		/* but XFree86 says trans */
110 	#define ROP_SRC 			0xCC
111 	#define ROP_PAT				0xF0
112 	#define ROP_DST 			0xAA
113 	#define ROP_SET				0xff
114 
115 #define PIXEL_8				0x221c
116 #define WINDOW_MIN			0x2220
117 #define WINDOW_MAX			0x2224
118 
119 #define PATTERN0			0x2280
120 #define PATTERN1			0x2284
121 #define PATTERN2			0x2288
122 #define PATTERN3			0x228c
123 #define USER0				0x2290
124 #define USER1				0x2294
125 #define USER2				0x2298
126 #define USER3				0x229c
127 #define BYTE_CLIP_MIN		0x22a0
128 #define BYTE_CLIP_MAX		0x22a4
129 
130 /* coordinate registers */
131 #define ABS_X0		0x3008
132 #define ABS_Y0		0x3010
133 #define ABS_XY0		0x3018
134 #define REL_X0		0x3028
135 #define REL_Y0		0x3030
136 #define REL_XY0		0x3038
137 
138 #define ABS_X1		0x3048
139 #define ABS_Y1		0x3050
140 #define ABS_XY1		0x3058
141 #define REL_X1		0x3068
142 #define REL_Y1		0x3070
143 #define REL_XY1		0x3078
144 
145 #define ABS_X2		0x3088
146 #define ABS_Y2		0x3090
147 #define ABS_XY2		0x3098
148 #define REL_X2		0x30a8
149 #define REL_Y2		0x30b0
150 #define REL_XY2		0x30b8
151 
152 #define ABS_X3		0x30c8
153 #define ABS_Y3		0x30d0
154 #define ABS_XY3		0x30d8
155 #define REL_X3		0x30e8
156 #define REL_Y3		0x30f0
157 #define REL_XY3		0x30f8
158 
159 /* meta-coordinates */
160 #define POINT_RTW_X		0x3208
161 #define POINT_RTW_Y		0x3210
162 #define POINT_RTW_XY	0x3218
163 #define POINT_RTP_X		0x3228
164 #define POINT_RTP_Y		0x3220
165 #define POINT_RTP_XY	0x3238
166 
167 #define LINE_RTW_X		0x3248
168 #define LINE_RTW_Y		0x3250
169 #define LINE_RTW_XY		0x3258
170 #define LINE_RTP_X		0x3268
171 #define LINE_RTP_Y		0x3260
172 #define LINE_RTP_XY		0x3278
173 
174 #define TRIANGLE_RTW_X	0x3288
175 #define TRIANGLE_RTW_Y	0x3290
176 #define TRIANGLE_RTW_XY	0x3298
177 #define TRIANGLE_RTP_X	0x32a8
178 #define TRIANGLE_RTP_Y	0x32a0
179 #define TRIANGLE_RTP_XY	0x32b8
180 
181 #define QUAD_RTW_X		0x32c8
182 #define QUAD_RTW_Y		0x32d0
183 #define QUAD_RTW_XY		0x32d8
184 #define QUAD_RTP_X		0x32e8
185 #define QUAD_RTP_Y		0x32e0
186 #define QUAD_RTP_XY		0x32f8
187 
188 #define RECT_RTW_X		0x3308
189 #define RECT_RTW_Y		0x3310
190 #define RECT_RTW_XY		0x3318
191 #define RECT_RTP_X		0x3328
192 #define RECT_RTP_Y		0x3320
193 #define RECT_RTP_XY		0x3338
194 
195 #endif
196