1 /* $NetBSD: esp_sbus.c,v 1.18 2001/11/15 09:48:15 lukem Exp $ */ 2 3 /*- 4 * Copyright (c) 1997, 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Charles M. Hannum; Jason R. Thorpe of the Numerical Aerospace 9 * Simulation Facility, NASA Ames Research Center; Paul Kranenburg. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. All advertising materials mentioning features or use of this software 20 * must display the following acknowledgement: 21 * This product includes software developed by the NetBSD 22 * Foundation, Inc. and its contributors. 23 * 4. Neither the name of The NetBSD Foundation nor the names of its 24 * contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGE. 38 */ 39 40 #include <sys/cdefs.h> 41 __KERNEL_RCSID(0, "$NetBSD: esp_sbus.c,v 1.18 2001/11/15 09:48:15 lukem Exp $"); 42 43 #include <sys/param.h> 44 #include <sys/systm.h> 45 #include <sys/device.h> 46 #include <sys/buf.h> 47 #include <sys/malloc.h> 48 49 #include <dev/scsipi/scsi_all.h> 50 #include <dev/scsipi/scsipi_all.h> 51 #include <dev/scsipi/scsiconf.h> 52 #include <dev/scsipi/scsi_message.h> 53 54 #include <machine/bus.h> 55 #include <machine/intr.h> 56 #include <machine/autoconf.h> 57 58 #include <dev/ic/lsi64854reg.h> 59 #include <dev/ic/lsi64854var.h> 60 61 #include <dev/ic/ncr53c9xreg.h> 62 #include <dev/ic/ncr53c9xvar.h> 63 64 #include <dev/sbus/sbusvar.h> 65 66 /* #define ESP_SBUS_DEBUG */ 67 68 struct esp_softc { 69 struct ncr53c9x_softc sc_ncr53c9x; /* glue to MI code */ 70 struct sbusdev sc_sd; /* sbus device */ 71 72 bus_space_tag_t sc_bustag; 73 bus_dma_tag_t sc_dmatag; 74 75 bus_space_handle_t sc_reg; /* the registers */ 76 struct lsi64854_softc *sc_dma; /* pointer to my dma */ 77 78 int sc_pri; /* SBUS priority */ 79 }; 80 81 void espattach_sbus __P((struct device *, struct device *, void *)); 82 void espattach_dma __P((struct device *, struct device *, void *)); 83 int espmatch_sbus __P((struct device *, struct cfdata *, void *)); 84 85 86 /* Linkup to the rest of the kernel */ 87 struct cfattach esp_sbus_ca = { 88 sizeof(struct esp_softc), espmatch_sbus, espattach_sbus 89 }; 90 struct cfattach esp_dma_ca = { 91 sizeof(struct esp_softc), espmatch_sbus, espattach_dma 92 }; 93 94 /* 95 * Functions and the switch for the MI code. 96 */ 97 static u_char esp_read_reg __P((struct ncr53c9x_softc *, int)); 98 static void esp_write_reg __P((struct ncr53c9x_softc *, int, u_char)); 99 static u_char esp_rdreg1 __P((struct ncr53c9x_softc *, int)); 100 static void esp_wrreg1 __P((struct ncr53c9x_softc *, int, u_char)); 101 static int esp_dma_isintr __P((struct ncr53c9x_softc *)); 102 static void esp_dma_reset __P((struct ncr53c9x_softc *)); 103 static int esp_dma_intr __P((struct ncr53c9x_softc *)); 104 static int esp_dma_setup __P((struct ncr53c9x_softc *, caddr_t *, 105 size_t *, int, size_t *)); 106 static void esp_dma_go __P((struct ncr53c9x_softc *)); 107 static void esp_dma_stop __P((struct ncr53c9x_softc *)); 108 static int esp_dma_isactive __P((struct ncr53c9x_softc *)); 109 110 static struct ncr53c9x_glue esp_sbus_glue = { 111 esp_read_reg, 112 esp_write_reg, 113 esp_dma_isintr, 114 esp_dma_reset, 115 esp_dma_intr, 116 esp_dma_setup, 117 esp_dma_go, 118 esp_dma_stop, 119 esp_dma_isactive, 120 NULL, /* gl_clear_latched_intr */ 121 }; 122 123 static struct ncr53c9x_glue esp_sbus_glue1 = { 124 esp_rdreg1, 125 esp_wrreg1, 126 esp_dma_isintr, 127 esp_dma_reset, 128 esp_dma_intr, 129 esp_dma_setup, 130 esp_dma_go, 131 esp_dma_stop, 132 esp_dma_isactive, 133 NULL, /* gl_clear_latched_intr */ 134 }; 135 136 static void espattach __P((struct esp_softc *, struct ncr53c9x_glue *)); 137 138 int 139 espmatch_sbus(parent, cf, aux) 140 struct device *parent; 141 struct cfdata *cf; 142 void *aux; 143 { 144 int rv; 145 struct sbus_attach_args *sa = aux; 146 147 if (strcmp("SUNW,fas", sa->sa_name) == 0) 148 return 1; 149 150 rv = (strcmp(cf->cf_driver->cd_name, sa->sa_name) == 0 || 151 strcmp("ptscII", sa->sa_name) == 0); 152 return (rv); 153 } 154 155 void 156 espattach_sbus(parent, self, aux) 157 struct device *parent, *self; 158 void *aux; 159 { 160 struct esp_softc *esc = (void *)self; 161 struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x; 162 struct sbus_attach_args *sa = aux; 163 struct lsi64854_softc *lsc; 164 int burst, sbusburst; 165 166 esc->sc_bustag = sa->sa_bustag; 167 esc->sc_dmatag = sa->sa_dmatag; 168 169 sc->sc_id = PROM_getpropint(sa->sa_node, "initiator-id", 7); 170 sc->sc_freq = PROM_getpropint(sa->sa_node, "clock-frequency", -1); 171 if (sc->sc_freq < 0) 172 sc->sc_freq = ((struct sbus_softc *) 173 sc->sc_dev.dv_parent)->sc_clockfreq; 174 175 #ifdef ESP_SBUS_DEBUG 176 printf("%s: espattach_sbus: sc_id %d, freq %d\n", 177 self->dv_xname, sc->sc_id, sc->sc_freq); 178 #endif 179 180 if (strcmp("SUNW,fas", sa->sa_name) == 0) { 181 182 /* 183 * fas has 2 register spaces: dma(lsi64854) and SCSI core (ncr53c9x) 184 */ 185 if (sa->sa_nreg != 2) { 186 printf("%s: %d register spaces\n", self->dv_xname, sa->sa_nreg); 187 return; 188 } 189 190 /* 191 * allocate space for dma, in SUNW,fas there are no separate 192 * dma device 193 */ 194 lsc = malloc(sizeof (struct lsi64854_softc), M_DEVBUF, M_NOWAIT); 195 196 if (lsc == NULL) { 197 printf("%s: out of memory (lsi64854_softc)\n", 198 self->dv_xname); 199 return; 200 } 201 esc->sc_dma = lsc; 202 203 lsc->sc_bustag = sa->sa_bustag; 204 lsc->sc_dmatag = sa->sa_dmatag; 205 206 bcopy(sc->sc_dev.dv_xname, lsc->sc_dev.dv_xname, 207 sizeof (lsc->sc_dev.dv_xname)); 208 209 /* Map dma registers */ 210 if (bus_space_map2(sa->sa_bustag, 211 sa->sa_reg[0].sbr_slot, 212 sa->sa_reg[0].sbr_offset, 213 sa->sa_reg[0].sbr_size, 214 BUS_SPACE_MAP_LINEAR, 215 0, &lsc->sc_regs) != 0) { 216 printf("%s: cannot map dma registers\n", self->dv_xname); 217 return; 218 } 219 220 /* 221 * XXX is this common(from bpp.c), the same in dma_sbus...etc. 222 * 223 * Get transfer burst size from PROM and plug it into the 224 * controller registers. This is needed on the Sun4m; do 225 * others need it too? 226 */ 227 sbusburst = ((struct sbus_softc *)parent)->sc_burst; 228 if (sbusburst == 0) 229 sbusburst = SBUS_BURST_32 - 1; /* 1->16 */ 230 231 burst = PROM_getpropint(sa->sa_node, "burst-sizes", -1); 232 233 #if ESP_SBUS_DEBUG 234 printf("espattach_sbus: burst 0x%x, sbus 0x%x\n", 235 burst, sbusburst); 236 #endif 237 238 if (burst == -1) 239 /* take SBus burst sizes */ 240 burst = sbusburst; 241 242 /* Clamp at parent's burst sizes */ 243 burst &= sbusburst; 244 lsc->sc_burst = (burst & SBUS_BURST_32) ? 32 : 245 (burst & SBUS_BURST_16) ? 16 : 0; 246 247 lsc->sc_channel = L64854_CHANNEL_SCSI; 248 lsc->sc_client = sc; 249 250 lsi64854_attach(lsc); 251 252 /* 253 * map SCSI core registers 254 */ 255 if (sbus_bus_map(sa->sa_bustag, 256 sa->sa_reg[1].sbr_slot, 257 sa->sa_reg[1].sbr_offset, 258 sa->sa_reg[1].sbr_size, 259 BUS_SPACE_MAP_LINEAR, 260 0, &esc->sc_reg) != 0) { 261 printf("%s @ sbus: cannot map scsi core registers\n", 262 self->dv_xname); 263 return; 264 } 265 266 if (sa->sa_nintr == 0) { 267 printf("\n%s: no interrupt property\n", self->dv_xname); 268 return; 269 } 270 271 esc->sc_pri = sa->sa_pri; 272 273 /* add me to the sbus structures */ 274 esc->sc_sd.sd_reset = (void *) ncr53c9x_reset; 275 sbus_establish(&esc->sc_sd, &sc->sc_dev); 276 277 espattach(esc, &esp_sbus_glue); 278 279 return; 280 } 281 282 /* 283 * Find the DMA by poking around the dma device structures 284 * 285 * What happens here is that if the dma driver has not been 286 * configured, then this returns a NULL pointer. Then when the 287 * dma actually gets configured, it does the opposing test, and 288 * if the sc->sc_esp field in it's softc is NULL, then tries to 289 * find the matching esp driver. 290 */ 291 esc->sc_dma = (struct lsi64854_softc *) 292 getdevunit("dma", sc->sc_dev.dv_unit); 293 294 /* 295 * and a back pointer to us, for DMA 296 */ 297 if (esc->sc_dma) 298 esc->sc_dma->sc_client = sc; 299 else { 300 printf("\n"); 301 panic("espattach: no dma found"); 302 } 303 304 /* 305 * The `ESC' DMA chip must be reset before we can access 306 * the esp registers. 307 */ 308 if (esc->sc_dma->sc_rev == DMAREV_ESC) 309 DMA_RESET(esc->sc_dma); 310 311 /* 312 * Map my registers in, if they aren't already in virtual 313 * address space. 314 */ 315 if (sa->sa_npromvaddrs) 316 esc->sc_reg = (bus_space_handle_t)sa->sa_promvaddrs[0]; 317 else { 318 if (sbus_bus_map(sa->sa_bustag, sa->sa_slot, 319 sa->sa_offset, 320 sa->sa_size, 321 BUS_SPACE_MAP_LINEAR, 322 0, &esc->sc_reg) != 0) { 323 printf("%s @ sbus: cannot map registers\n", 324 self->dv_xname); 325 return; 326 } 327 } 328 329 if (sa->sa_nintr == 0) { 330 /* 331 * No interrupt properties: we quit; this might 332 * happen on e.g. a Sparc X terminal. 333 */ 334 printf("\n%s: no interrupt property\n", self->dv_xname); 335 return; 336 } 337 338 esc->sc_pri = sa->sa_pri; 339 340 /* add me to the sbus structures */ 341 esc->sc_sd.sd_reset = (void *) ncr53c9x_reset; 342 sbus_establish(&esc->sc_sd, &sc->sc_dev); 343 344 if (strcmp("ptscII", sa->sa_name) == 0) { 345 espattach(esc, &esp_sbus_glue1); 346 } else { 347 espattach(esc, &esp_sbus_glue); 348 } 349 } 350 351 void 352 espattach_dma(parent, self, aux) 353 struct device *parent, *self; 354 void *aux; 355 { 356 struct esp_softc *esc = (void *)self; 357 struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x; 358 struct sbus_attach_args *sa = aux; 359 360 if (strcmp("ptscII", sa->sa_name) == 0) { 361 return; 362 } 363 364 esc->sc_bustag = sa->sa_bustag; 365 esc->sc_dmatag = sa->sa_dmatag; 366 367 sc->sc_id = PROM_getpropint(sa->sa_node, "initiator-id", 7); 368 sc->sc_freq = PROM_getpropint(sa->sa_node, "clock-frequency", -1); 369 370 esc->sc_dma = (struct lsi64854_softc *)parent; 371 esc->sc_dma->sc_client = sc; 372 373 /* 374 * Map my registers in, if they aren't already in virtual 375 * address space. 376 */ 377 if (sa->sa_npromvaddrs) 378 esc->sc_reg = (bus_space_handle_t)sa->sa_promvaddrs[0]; 379 else { 380 if (bus_space_map2(sa->sa_bustag, 381 sa->sa_slot, 382 sa->sa_offset, 383 sa->sa_size, 384 BUS_SPACE_MAP_LINEAR, 385 0, &esc->sc_reg) != 0) { 386 printf("%s @ dma: cannot map registers\n", 387 self->dv_xname); 388 return; 389 } 390 } 391 392 if (sa->sa_nintr == 0) { 393 /* 394 * No interrupt properties: we quit; this might 395 * happen on e.g. a Sparc X terminal. 396 */ 397 printf("\n%s: no interrupt property\n", self->dv_xname); 398 return; 399 } 400 401 esc->sc_pri = sa->sa_pri; 402 403 /* Assume SBus is grandparent */ 404 esc->sc_sd.sd_reset = (void *) ncr53c9x_reset; 405 sbus_establish(&esc->sc_sd, parent); 406 407 espattach(esc, &esp_sbus_glue); 408 } 409 410 411 /* 412 * Attach this instance, and then all the sub-devices 413 */ 414 void 415 espattach(esc, gluep) 416 struct esp_softc *esc; 417 struct ncr53c9x_glue *gluep; 418 { 419 struct ncr53c9x_softc *sc = &esc->sc_ncr53c9x; 420 void *icookie; 421 unsigned int uid = 0; 422 423 /* 424 * Set up glue for MI code early; we use some of it here. 425 */ 426 sc->sc_glue = gluep; 427 428 /* gimme Mhz */ 429 sc->sc_freq /= 1000000; 430 431 /* 432 * XXX More of this should be in ncr53c9x_attach(), but 433 * XXX should we really poke around the chip that much in 434 * XXX the MI code? Think about this more... 435 */ 436 437 /* 438 * It is necessary to try to load the 2nd config register here, 439 * to find out what rev the esp chip is, else the ncr53c9x_reset 440 * will not set up the defaults correctly. 441 */ 442 sc->sc_cfg1 = sc->sc_id | NCRCFG1_PARENB; 443 sc->sc_cfg2 = NCRCFG2_SCSI2 | NCRCFG2_RPE; 444 sc->sc_cfg3 = NCRCFG3_CDB; 445 NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2); 446 447 if ((NCR_READ_REG(sc, NCR_CFG2) & ~NCRCFG2_RSVD) != 448 (NCRCFG2_SCSI2 | NCRCFG2_RPE)) { 449 sc->sc_rev = NCR_VARIANT_ESP100; 450 } else { 451 sc->sc_cfg2 = NCRCFG2_SCSI2; 452 NCR_WRITE_REG(sc, NCR_CFG2, sc->sc_cfg2); 453 sc->sc_cfg3 = 0; 454 NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3); 455 sc->sc_cfg3 = (NCRCFG3_CDB | NCRCFG3_FCLK); 456 NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3); 457 if (NCR_READ_REG(sc, NCR_CFG3) != 458 (NCRCFG3_CDB | NCRCFG3_FCLK)) { 459 sc->sc_rev = NCR_VARIANT_ESP100A; 460 } else { 461 /* NCRCFG2_FE enables > 64K transfers */ 462 sc->sc_cfg2 |= NCRCFG2_FE; 463 sc->sc_cfg3 = 0; 464 NCR_WRITE_REG(sc, NCR_CFG3, sc->sc_cfg3); 465 sc->sc_rev = NCR_VARIANT_ESP200; 466 467 /* XXX spec says it's valid after power up or chip reset */ 468 uid = NCR_READ_REG(sc, NCR_UID); 469 if (((uid & 0xf8) >> 3) == 0x0a) /* XXX */ 470 sc->sc_rev = NCR_VARIANT_FAS366; 471 } 472 } 473 474 #ifdef ESP_SBUS_DEBUG 475 printf("espattach: revision %d, uid 0x%x\n", sc->sc_rev, uid); 476 #endif 477 478 /* 479 * XXX minsync and maxxfer _should_ be set up in MI code, 480 * XXX but it appears to have some dependency on what sort 481 * XXX of DMA we're hooked up to, etc. 482 */ 483 484 /* 485 * This is the value used to start sync negotiations 486 * Note that the NCR register "SYNCTP" is programmed 487 * in "clocks per byte", and has a minimum value of 4. 488 * The SCSI period used in negotiation is one-fourth 489 * of the time (in nanoseconds) needed to transfer one byte. 490 * Since the chip's clock is given in MHz, we have the following 491 * formula: 4 * period = (1000 / freq) * 4 492 */ 493 sc->sc_minsync = 1000 / sc->sc_freq; 494 495 /* 496 * Alas, we must now modify the value a bit, because it's 497 * only valid when can switch on FASTCLK and FASTSCSI bits 498 * in config register 3... 499 */ 500 switch (sc->sc_rev) { 501 case NCR_VARIANT_ESP100: 502 sc->sc_maxxfer = 64 * 1024; 503 sc->sc_minsync = 0; /* No synch on old chip? */ 504 break; 505 506 case NCR_VARIANT_ESP100A: 507 sc->sc_maxxfer = 64 * 1024; 508 /* Min clocks/byte is 5 */ 509 sc->sc_minsync = ncr53c9x_cpb2stp(sc, 5); 510 break; 511 512 case NCR_VARIANT_ESP200: 513 case NCR_VARIANT_FAS366: 514 sc->sc_maxxfer = 16 * 1024 * 1024; 515 /* XXX - do actually set FAST* bits */ 516 break; 517 } 518 519 /* Establish interrupt channel */ 520 icookie = bus_intr_establish(esc->sc_bustag, esc->sc_pri, IPL_BIO, 0, 521 ncr53c9x_intr, sc); 522 523 /* register interrupt stats */ 524 evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, NULL, 525 sc->sc_dev.dv_xname, "intr"); 526 527 /* Turn on target selection using the `dma' method */ 528 if (sc->sc_rev != NCR_VARIANT_FAS366) 529 sc->sc_features |= NCR_F_DMASELECT; 530 531 /* Do the common parts of attachment. */ 532 sc->sc_adapter.adapt_minphys = minphys; 533 sc->sc_adapter.adapt_request = ncr53c9x_scsipi_request; 534 ncr53c9x_attach(sc); 535 536 } 537 538 /* 539 * Glue functions. 540 */ 541 542 #ifdef ESP_SBUS_DEBUG 543 int esp_sbus_debug = 0; 544 545 static struct { 546 char *r_name; 547 int r_flag; 548 } esp__read_regnames [] = { 549 { "TCL", 0}, /* 0/00 */ 550 { "TCM", 0}, /* 1/04 */ 551 { "FIFO", 0}, /* 2/08 */ 552 { "CMD", 0}, /* 3/0c */ 553 { "STAT", 0}, /* 4/10 */ 554 { "INTR", 0}, /* 5/14 */ 555 { "STEP", 0}, /* 6/18 */ 556 { "FFLAGS", 1}, /* 7/1c */ 557 { "CFG1", 1}, /* 8/20 */ 558 { "STAT2", 0}, /* 9/24 */ 559 { "CFG4", 1}, /* a/28 */ 560 { "CFG2", 1}, /* b/2c */ 561 { "CFG3", 1}, /* c/30 */ 562 { "-none", 1}, /* d/34 */ 563 { "TCH", 1}, /* e/38 */ 564 { "TCX", 1}, /* f/3c */ 565 }; 566 567 static struct { 568 char *r_name; 569 int r_flag; 570 } esp__write_regnames[] = { 571 { "TCL", 1}, /* 0/00 */ 572 { "TCM", 1}, /* 1/04 */ 573 { "FIFO", 0}, /* 2/08 */ 574 { "CMD", 0}, /* 3/0c */ 575 { "SELID", 1}, /* 4/10 */ 576 { "TIMEOUT", 1}, /* 5/14 */ 577 { "SYNCTP", 1}, /* 6/18 */ 578 { "SYNCOFF", 1}, /* 7/1c */ 579 { "CFG1", 1}, /* 8/20 */ 580 { "CCF", 1}, /* 9/24 */ 581 { "TEST", 1}, /* a/28 */ 582 { "CFG2", 1}, /* b/2c */ 583 { "CFG3", 1}, /* c/30 */ 584 { "-none", 1}, /* d/34 */ 585 { "TCH", 1}, /* e/38 */ 586 { "TCX", 1}, /* f/3c */ 587 }; 588 #endif 589 590 u_char 591 esp_read_reg(sc, reg) 592 struct ncr53c9x_softc *sc; 593 int reg; 594 { 595 struct esp_softc *esc = (struct esp_softc *)sc; 596 u_char v; 597 598 v = bus_space_read_1(esc->sc_bustag, esc->sc_reg, reg * 4); 599 #ifdef ESP_SBUS_DEBUG 600 if (esp_sbus_debug && (reg < 0x10) && esp__read_regnames[reg].r_flag) 601 printf("RD:%x <%s> %x\n", reg * 4, 602 ((unsigned)reg < 0x10) ? esp__read_regnames[reg].r_name : "<***>", v); 603 #endif 604 return v; 605 } 606 607 void 608 esp_write_reg(sc, reg, v) 609 struct ncr53c9x_softc *sc; 610 int reg; 611 u_char v; 612 { 613 struct esp_softc *esc = (struct esp_softc *)sc; 614 615 #ifdef ESP_SBUS_DEBUG 616 if (esp_sbus_debug && (reg < 0x10) && esp__write_regnames[reg].r_flag) 617 printf("WR:%x <%s> %x\n", reg * 4, 618 ((unsigned)reg < 0x10) ? esp__write_regnames[reg].r_name : "<***>", v); 619 #endif 620 bus_space_write_1(esc->sc_bustag, esc->sc_reg, reg * 4, v); 621 } 622 623 u_char 624 esp_rdreg1(sc, reg) 625 struct ncr53c9x_softc *sc; 626 int reg; 627 { 628 struct esp_softc *esc = (struct esp_softc *)sc; 629 630 return (bus_space_read_1(esc->sc_bustag, esc->sc_reg, reg)); 631 } 632 633 void 634 esp_wrreg1(sc, reg, v) 635 struct ncr53c9x_softc *sc; 636 int reg; 637 u_char v; 638 { 639 struct esp_softc *esc = (struct esp_softc *)sc; 640 641 bus_space_write_1(esc->sc_bustag, esc->sc_reg, reg, v); 642 } 643 644 int 645 esp_dma_isintr(sc) 646 struct ncr53c9x_softc *sc; 647 { 648 struct esp_softc *esc = (struct esp_softc *)sc; 649 650 return (DMA_ISINTR(esc->sc_dma)); 651 } 652 653 void 654 esp_dma_reset(sc) 655 struct ncr53c9x_softc *sc; 656 { 657 struct esp_softc *esc = (struct esp_softc *)sc; 658 659 DMA_RESET(esc->sc_dma); 660 } 661 662 int 663 esp_dma_intr(sc) 664 struct ncr53c9x_softc *sc; 665 { 666 struct esp_softc *esc = (struct esp_softc *)sc; 667 668 return (DMA_INTR(esc->sc_dma)); 669 } 670 671 int 672 esp_dma_setup(sc, addr, len, datain, dmasize) 673 struct ncr53c9x_softc *sc; 674 caddr_t *addr; 675 size_t *len; 676 int datain; 677 size_t *dmasize; 678 { 679 struct esp_softc *esc = (struct esp_softc *)sc; 680 681 return (DMA_SETUP(esc->sc_dma, addr, len, datain, dmasize)); 682 } 683 684 void 685 esp_dma_go(sc) 686 struct ncr53c9x_softc *sc; 687 { 688 struct esp_softc *esc = (struct esp_softc *)sc; 689 690 DMA_GO(esc->sc_dma); 691 } 692 693 void 694 esp_dma_stop(sc) 695 struct ncr53c9x_softc *sc; 696 { 697 struct esp_softc *esc = (struct esp_softc *)sc; 698 u_int32_t csr; 699 700 csr = L64854_GCSR(esc->sc_dma); 701 csr &= ~D_EN_DMA; 702 L64854_SCSR(esc->sc_dma, csr); 703 } 704 705 int 706 esp_dma_isactive(sc) 707 struct ncr53c9x_softc *sc; 708 { 709 struct esp_softc *esc = (struct esp_softc *)sc; 710 711 return (DMA_ISACTIVE(esc->sc_dma)); 712 } 713 714 #include "opt_ddb.h" 715 #ifdef DDB 716 #include <machine/db_machdep.h> 717 #include <ddb/db_output.h> 718 719 void db_esp __P((db_expr_t, int, db_expr_t, char*)); 720 721 void 722 db_esp(addr, have_addr, count, modif) 723 db_expr_t addr; 724 int have_addr; 725 db_expr_t count; 726 char *modif; 727 { 728 struct ncr53c9x_softc *sc; 729 struct ncr53c9x_ecb *ecb; 730 struct ncr53c9x_linfo *li; 731 int u, t, i; 732 733 for (u=0; u<10; u++) { 734 sc = (struct ncr53c9x_softc *) 735 getdevunit("esp", u); 736 if (!sc) continue; 737 738 db_printf("esp%d: nexus %p phase %x prev %x dp %p dleft %lx ify %x\n", 739 u, sc->sc_nexus, sc->sc_phase, sc->sc_prevphase, 740 sc->sc_dp, sc->sc_dleft, sc->sc_msgify); 741 db_printf("\tmsgout %x msgpriq %x msgin %x:%x:%x:%x:%x\n", 742 sc->sc_msgout, sc->sc_msgpriq, sc->sc_imess[0], 743 sc->sc_imess[1], sc->sc_imess[2], sc->sc_imess[3], 744 sc->sc_imess[0]); 745 db_printf("ready: "); 746 for (ecb = sc->ready_list.tqh_first; ecb; ecb = ecb->chain.tqe_next) { 747 db_printf("ecb %p ", ecb); 748 if (ecb == ecb->chain.tqe_next) { 749 db_printf("\nWARNING: tailq loop on ecb %p", ecb); 750 break; 751 } 752 } 753 db_printf("\n"); 754 755 for (t=0; t<NCR_NTARG; t++) { 756 LIST_FOREACH(li, &sc->sc_tinfo[t].luns, link) { 757 db_printf("t%d lun %d untagged %p busy %d used %x\n", 758 t, (int)li->lun, li->untagged, li->busy, 759 li->used); 760 for (i=0; i<256; i++) 761 if ((ecb = li->queued[i])) { 762 db_printf("ecb %p tag %x\n", ecb, i); 763 } 764 } 765 } 766 } 767 } 768 #endif 769 770