xref: /netbsd-src/sys/dev/sbus/bpp.c (revision e5548b402ae4c44fb816de42c7bba9581ce23ef5) 
1 /*	$NetBSD: bpp.c,v 1.25 2005/12/11 12:23:44 christos Exp $ */
2 
3 /*-
4  * Copyright (c) 1998 The NetBSD Foundation, Inc.
5  * All rights reserved.
6  *
7  * This code is derived from software contributed to The NetBSD Foundation
8  * by Paul Kranenburg.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. All advertising materials mentioning features or use of this software
19  *    must display the following acknowledgement:
20  *        This product includes software developed by the NetBSD
21  *        Foundation, Inc. and its contributors.
22  * 4. Neither the name of The NetBSD Foundation nor the names of its
23  *    contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
27  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
28  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
29  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
30  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
31  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
32  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
33  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
34  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
35  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
36  * POSSIBILITY OF SUCH DAMAGE.
37  */
38 
39 #include <sys/cdefs.h>
40 __KERNEL_RCSID(0, "$NetBSD: bpp.c,v 1.25 2005/12/11 12:23:44 christos Exp $");
41 
42 #include <sys/param.h>
43 #include <sys/ioctl.h>
44 #include <sys/fcntl.h>
45 #include <sys/systm.h>
46 #include <sys/kernel.h>
47 #include <sys/vnode.h>
48 #include <sys/poll.h>
49 #include <sys/select.h>
50 #include <sys/malloc.h>
51 #include <sys/proc.h>
52 #include <sys/signalvar.h>
53 #include <sys/conf.h>
54 #include <sys/errno.h>
55 #include <sys/device.h>
56 
57 #include <machine/bus.h>
58 #include <machine/intr.h>
59 #include <machine/autoconf.h>
60 
61 #include <dev/ic/lsi64854reg.h>
62 #include <dev/ic/lsi64854var.h>
63 
64 #include <dev/sbus/sbusvar.h>
65 #include <dev/sbus/bppreg.h>
66 
67 #define splbpp()	spltty()	/* XXX */
68 
69 #ifdef DEBUG
70 #define DPRINTF(x) do { if (bppdebug) printf x ; } while (0)
71 int bppdebug = 1;
72 #else
73 #define DPRINTF(x)
74 #endif
75 
76 #if 0
77 struct bpp_param {
78 	int	bpp_dss;		/* data setup to strobe */
79 	int	bpp_dsw;		/* data strobe width */
80 	int	bpp_outputpins;		/* Select/Autofeed/Init pins */
81 	int	bpp_inputpins;		/* Error/Select/Paperout pins */
82 };
83 #endif
84 
85 struct hwstate {
86 	u_int16_t	hw_hcr;		/* Hardware config register */
87 	u_int16_t	hw_ocr;		/* Operation config register */
88 	u_int8_t	hw_tcr;		/* Transfer Control register */
89 	u_int8_t	hw_or;		/* Output register */
90 	u_int16_t	hw_irq;		/* IRQ; polarity bits only */
91 };
92 
93 struct bpp_softc {
94 	struct lsi64854_softc	sc_lsi64854;	/* base device */
95 	struct sbusdev	sc_sd;			/* sbus device */
96 
97 	size_t		sc_bufsz;		/* temp buffer */
98 	caddr_t		sc_buf;
99 
100 	int		sc_error;		/* bottom-half error */
101 	int		sc_flags;
102 #define BPP_OPEN	0x01		/* Device is open */
103 #define BPP_XCLUDE	0x02		/* Exclusive-open mode */
104 #define BPP_ASYNC	0x04		/* Asynchronous I/O mode */
105 #define BPP_LOCKED	0x08		/* DMA in progress */
106 #define BPP_WANT	0x10		/* Waiting for DMA */
107 
108 	struct selinfo	sc_rsel;
109 	struct selinfo	sc_wsel;
110 	struct proc	*sc_asyncproc;	/* Process to notify if async */
111 
112 	/* Hardware state */
113 	struct hwstate		sc_hwdefault;
114 	struct hwstate		sc_hwcurrent;
115 };
116 
117 static int	bppmatch(struct device *, struct cfdata *, void *);
118 static void	bppattach(struct device *, struct device *, void *);
119 static int	bppintr		(void *);
120 static void	bpp_setparams(struct bpp_softc *, struct hwstate *);
121 
122 CFATTACH_DECL(bpp, sizeof(struct bpp_softc),
123     bppmatch, bppattach, NULL, NULL);
124 
125 extern struct cfdriver bpp_cd;
126 
127 dev_type_open(bppopen);
128 dev_type_close(bppclose);
129 dev_type_write(bppwrite);
130 dev_type_ioctl(bppioctl);
131 dev_type_poll(bpppoll);
132 dev_type_kqfilter(bppkqfilter);
133 
134 const struct cdevsw bpp_cdevsw = {
135 	bppopen, bppclose, noread, bppwrite, bppioctl,
136 	nostop, notty, bpppoll, nommap, bppkqfilter,
137 };
138 
139 #define BPPUNIT(dev)	(minor(dev))
140 
141 
142 int
143 bppmatch(parent, cf, aux)
144 	struct device *parent;
145 	struct cfdata *cf;
146 	void *aux;
147 {
148 	struct sbus_attach_args *sa = aux;
149 
150 	return (strcmp("SUNW,bpp", sa->sa_name) == 0);
151 }
152 
153 void
154 bppattach(parent, self, aux)
155 	struct device *parent, *self;
156 	void *aux;
157 {
158 	struct sbus_attach_args *sa = aux;
159 	struct bpp_softc *dsc = (void *)self;
160 	struct lsi64854_softc *sc = &dsc->sc_lsi64854;
161 	int burst, sbusburst;
162 	int node;
163 
164 	sc->sc_bustag = sa->sa_bustag;
165 	sc->sc_dmatag = sa->sa_dmatag;
166 	node = sa->sa_node;
167 
168 	/* Map device registers */
169 	if (sbus_bus_map(sa->sa_bustag,
170 			 sa->sa_slot, sa->sa_offset, sa->sa_size,
171 			 0, &sc->sc_regs) != 0) {
172 		printf("%s: cannot map registers\n", self->dv_xname);
173 		return;
174 	}
175 
176 	/*
177 	 * Get transfer burst size from PROM and plug it into the
178 	 * controller registers. This is needed on the Sun4m; do
179 	 * others need it too?
180 	 */
181 	sbusburst = ((struct sbus_softc *)parent)->sc_burst;
182 	if (sbusburst == 0)
183 		sbusburst = SBUS_BURST_32 - 1; /* 1->16 */
184 
185 	burst = prom_getpropint(node, "burst-sizes", -1);
186 	if (burst == -1)
187 		/* take SBus burst sizes */
188 		burst = sbusburst;
189 
190 	/* Clamp at parent's burst sizes */
191 	burst &= sbusburst;
192 	sc->sc_burst = (burst & SBUS_BURST_32) ? 32 :
193 		       (burst & SBUS_BURST_16) ? 16 : 0;
194 
195 	/* Join the Sbus device family */
196 	dsc->sc_sd.sd_reset = (void *)0;
197 	sbus_establish(&dsc->sc_sd, self);
198 
199 	/* Initialize the DMA channel */
200 	sc->sc_channel = L64854_CHANNEL_PP;
201 	lsi64854_attach(sc);
202 
203 	/* Establish interrupt handler */
204 	if (sa->sa_nintr) {
205 		sc->sc_intrchain = bppintr;
206 		sc->sc_intrchainarg = dsc;
207 		(void)bus_intr_establish(sa->sa_bustag, sa->sa_pri, IPL_TTY,
208 					 bppintr, sc);
209 	}
210 
211 	/* Allocate buffer XXX - should actually use dmamap_uio() */
212 	dsc->sc_bufsz = 1024;
213 	dsc->sc_buf = malloc(dsc->sc_bufsz, M_DEVBUF, M_NOWAIT);
214 
215 	/* XXX read default state */
216 	{
217 	bus_space_handle_t h = sc->sc_regs;
218 	struct hwstate *hw = &dsc->sc_hwdefault;
219 	int ack_rate = sa->sa_frequency/1000000;
220 
221 	hw->hw_hcr = bus_space_read_2(sc->sc_bustag, h, L64854_REG_HCR);
222 	hw->hw_ocr = bus_space_read_2(sc->sc_bustag, h, L64854_REG_OCR);
223 	hw->hw_tcr = bus_space_read_1(sc->sc_bustag, h, L64854_REG_TCR);
224 	hw->hw_or = bus_space_read_1(sc->sc_bustag, h, L64854_REG_OR);
225 
226 	DPRINTF(("bpp: hcr %x ocr %x tcr %x or %x\n",
227 		 hw->hw_hcr, hw->hw_ocr, hw->hw_tcr, hw->hw_or));
228 	/* Set these to sane values */
229 	hw->hw_hcr = ((ack_rate<<BPP_HCR_DSS_SHFT)&BPP_HCR_DSS_MASK)
230 		| ((ack_rate<<BPP_HCR_DSW_SHFT)&BPP_HCR_DSW_MASK);
231 	hw->hw_ocr |= BPP_OCR_ACK_OP;
232 	}
233 }
234 
235 void
236 bpp_setparams(sc, hw)
237 	struct bpp_softc *sc;
238 	struct hwstate *hw;
239 {
240 	u_int16_t irq;
241 	bus_space_tag_t t = sc->sc_lsi64854.sc_bustag;
242 	bus_space_handle_t h = sc->sc_lsi64854.sc_regs;
243 
244 	bus_space_write_2(t, h, L64854_REG_HCR, hw->hw_hcr);
245 	bus_space_write_2(t, h, L64854_REG_OCR, hw->hw_ocr);
246 	bus_space_write_1(t, h, L64854_REG_TCR, hw->hw_tcr);
247 	bus_space_write_1(t, h, L64854_REG_OR, hw->hw_or);
248 
249 	/* Only change IRP settings in interrupt status register */
250 	irq = bus_space_read_2(t, h, L64854_REG_ICR);
251 	irq &= ~BPP_ALLIRP;
252 	irq |= (hw->hw_irq & BPP_ALLIRP);
253 	bus_space_write_2(t, h, L64854_REG_ICR, irq);
254 	DPRINTF(("bpp_setparams: hcr %x ocr %x tcr %x or %x, irq %x\n",
255 		 hw->hw_hcr, hw->hw_ocr, hw->hw_tcr, hw->hw_or, irq));
256 }
257 
258 int
259 bppopen(dev, flags, mode, l)
260 	dev_t dev;
261 	int flags, mode;
262 	struct lwp *l;
263 {
264 	int unit = BPPUNIT(dev);
265 	struct bpp_softc *sc;
266 	struct lsi64854_softc *lsi;
267 	u_int16_t irq;
268 	int s;
269 
270 	if (unit >= bpp_cd.cd_ndevs)
271 		return (ENXIO);
272 	sc = bpp_cd.cd_devs[unit];
273 
274 	if ((sc->sc_flags & (BPP_OPEN|BPP_XCLUDE)) == (BPP_OPEN|BPP_XCLUDE))
275 		return (EBUSY);
276 
277 	lsi = &sc->sc_lsi64854;
278 
279 	/* Set default parameters */
280 	sc->sc_hwcurrent = sc->sc_hwdefault;
281 	s = splbpp();
282 	bpp_setparams(sc, &sc->sc_hwdefault);
283 	splx(s);
284 
285 	/* Enable interrupts */
286 	irq = BPP_ERR_IRQ_EN;
287 	irq |= sc->sc_hwdefault.hw_irq;
288 	bus_space_write_2(lsi->sc_bustag, lsi->sc_regs, L64854_REG_ICR, irq);
289 	return (0);
290 }
291 
292 int
293 bppclose(dev, flags, mode, l)
294 	dev_t dev;
295 	int flags, mode;
296 	struct lwp *l;
297 {
298 	struct bpp_softc *sc = bpp_cd.cd_devs[BPPUNIT(dev)];
299 	struct lsi64854_softc *lsi = &sc->sc_lsi64854;
300 	u_int16_t irq;
301 
302 	/* Turn off all interrupt enables */
303 	irq = sc->sc_hwdefault.hw_irq | BPP_ALLIRQ;
304 	irq &= ~BPP_ALLEN;
305 	bus_space_write_2(lsi->sc_bustag, lsi->sc_regs, L64854_REG_ICR, irq);
306 
307 	sc->sc_asyncproc = NULL;
308 	sc->sc_flags = 0;
309 	return (0);
310 }
311 
312 int
313 bppwrite(dev, uio, flags)
314 	dev_t dev;
315 	struct uio *uio;
316 	int flags;
317 {
318 	struct bpp_softc *sc = bpp_cd.cd_devs[BPPUNIT(dev)];
319 	struct lsi64854_softc *lsi = &sc->sc_lsi64854;
320 	int error = 0;
321 	int s;
322 
323 	/*
324 	 * Wait until the DMA engine is free.
325 	 */
326 	s = splbpp();
327 	while ((sc->sc_flags & BPP_LOCKED) != 0) {
328 		if ((flags & IO_NDELAY) != 0) {
329 			splx(s);
330 			return (EWOULDBLOCK);
331 		}
332 
333 		sc->sc_flags |= BPP_WANT;
334 		error = tsleep(sc->sc_buf, PZERO|PCATCH, "bppwrite", 0);
335 		if (error != 0) {
336 			splx(s);
337 			return (error);
338 		}
339 	}
340 	sc->sc_flags |= BPP_LOCKED;
341 	splx(s);
342 
343 	/*
344 	 * Move data from user space into our private buffer
345 	 * and start DMA.
346 	 */
347 	while (uio->uio_resid > 0) {
348 		caddr_t bp = sc->sc_buf;
349 		size_t len = min(sc->sc_bufsz, uio->uio_resid);
350 
351 		if ((error = uiomove(bp, len, uio)) != 0)
352 			break;
353 
354 		while (len > 0) {
355 			u_int8_t tcr;
356 			size_t size = len;
357 			DMA_SETUP(lsi, &bp, &len, 0, &size);
358 
359 #ifdef DEBUG
360 			if (bppdebug) {
361 				int i;
362 				printf("bpp: writing %ld : ", len);
363 				for (i=0; i<len; i++) printf("%c(0x%x)", bp[i], bp[i]);
364 				printf("\n");
365 			}
366 #endif
367 
368 			/* Clear direction control bit */
369 			tcr = bus_space_read_1(lsi->sc_bustag, lsi->sc_regs,
370 						L64854_REG_TCR);
371 			tcr &= ~BPP_TCR_DIR;
372 			bus_space_write_1(lsi->sc_bustag, lsi->sc_regs,
373 					  L64854_REG_TCR, tcr);
374 
375 			/* Enable DMA */
376 			s = splbpp();
377 			DMA_GO(lsi);
378 			error = tsleep(sc, PZERO|PCATCH, "bppdma", 0);
379 			splx(s);
380 			if (error != 0)
381 				goto out;
382 
383 			/* Bail out if bottom half reported an error */
384 			if ((error = sc->sc_error) != 0)
385 				goto out;
386 
387 			/*
388 			 * lsi64854_pp_intr() does this part.
389 			 *
390 			 * len -= size;
391 			 */
392 		}
393 	}
394 
395 out:
396 	DPRINTF(("bpp done %x\n", error));
397 	s = splbpp();
398 	sc->sc_flags &= ~BPP_LOCKED;
399 	if ((sc->sc_flags & BPP_WANT) != 0) {
400 		sc->sc_flags &= ~BPP_WANT;
401 		wakeup(sc->sc_buf);
402 	}
403 	splx(s);
404 	return (error);
405 }
406 
407 /* move to header: */
408 #define BPPIOCSPARAM	_IOW('P', 0x1, struct hwstate)
409 #define BPPIOCGPARAM	_IOR('P', 0x2, struct hwstate)
410 
411 int
412 bppioctl(dev, cmd, data, flag, l)
413 	dev_t	dev;
414 	u_long	cmd;
415 	caddr_t	data;
416 	int	flag;
417 	struct	lwp *l;
418 {
419 	struct bpp_softc *sc = bpp_cd.cd_devs[BPPUNIT(dev)];
420 	struct proc *p = l->l_proc;
421 	struct hwstate *hw, *chw;
422 	int error = 0;
423 	int s;
424 
425 	switch(cmd) {
426 	case BPPIOCSPARAM:
427 		chw = &sc->sc_hwcurrent;
428 		hw = (struct hwstate *)data;
429 
430 		/*
431 		 * Extract and store user-settable bits.
432 		 */
433 #define _bpp_set(reg,mask) do {		\
434 	chw->reg &= ~(mask);		\
435 	chw->reg |= (hw->reg & (mask));	\
436 } while (0)
437 		_bpp_set(hw_hcr, BPP_HCR_DSS_MASK|BPP_HCR_DSW_MASK);
438 		_bpp_set(hw_ocr, BPP_OCR_USER);
439 		_bpp_set(hw_tcr, BPP_TCR_USER);
440 		_bpp_set(hw_or,  BPP_OR_USER);
441 		_bpp_set(hw_irq, BPP_IRQ_USER);
442 #undef _bpp_set
443 
444 		/* Apply settings */
445 		s = splbpp();
446 		bpp_setparams(sc, chw);
447 		splx(s);
448 		break;
449 	case BPPIOCGPARAM:
450 		*((struct hwstate *)data) = sc->sc_hwcurrent;
451 		break;
452 	case TIOCEXCL:
453 		s = splbpp();
454 		sc->sc_flags |= BPP_XCLUDE;
455 		splx(s);
456 		break;
457 	case TIOCNXCL:
458 		s = splbpp();
459 		sc->sc_flags &= ~BPP_XCLUDE;
460 		splx(s);
461 		break;
462 	case FIOASYNC:
463 		s = splbpp();
464 		if (*(int *)data) {
465 			if (sc->sc_asyncproc != NULL)
466 				error = EBUSY;
467 			else
468 				sc->sc_asyncproc = p;
469 		} else
470 			sc->sc_asyncproc = NULL;
471 		splx(s);
472 		break;
473 	default:
474 		break;
475 	}
476 
477 	return (error);
478 }
479 
480 int
481 bpppoll(dev, events, l)
482 	dev_t dev;
483 	int events;
484 	struct lwp *l;
485 {
486 	struct bpp_softc *sc = bpp_cd.cd_devs[BPPUNIT(dev)];
487 	int revents = 0;
488 
489 	if (events & (POLLIN | POLLRDNORM)) {
490 		/* read is not yet implemented */
491 	}
492 
493 	if (events & (POLLOUT | POLLWRNORM)) {
494 		if ((sc->sc_flags & BPP_LOCKED) == 0)
495 			revents |= (POLLOUT | POLLWRNORM);
496 	}
497 
498 	if (revents == 0) {
499 		if (events & (POLLIN | POLLRDNORM))
500 			selrecord(l, &sc->sc_rsel);
501 		if (events & (POLLOUT | POLLWRNORM))
502 			selrecord(l, &sc->sc_wsel);
503 	}
504 
505 	return (revents);
506 }
507 
508 static void
509 filt_bpprdetach(struct knote *kn)
510 {
511 	struct bpp_softc *sc = kn->kn_hook;
512 	int s;
513 
514 	s = splbpp();
515 	SLIST_REMOVE(&sc->sc_rsel.sel_klist, kn, knote, kn_selnext);
516 	splx(s);
517 }
518 
519 static int
520 filt_bppread(struct knote *kn, long hint)
521 {
522 	/* XXX Read not yet implemented. */
523 	return (0);
524 }
525 
526 static const struct filterops bppread_filtops =
527 	{ 1, NULL, filt_bpprdetach, filt_bppread };
528 
529 static void
530 filt_bppwdetach(struct knote *kn)
531 {
532 	struct bpp_softc *sc = kn->kn_hook;
533 	int s;
534 
535 	s = splbpp();
536 	SLIST_REMOVE(&sc->sc_wsel.sel_klist, kn, knote, kn_selnext);
537 	splx(s);
538 }
539 
540 static int
541 filt_bpfwrite(struct knote *kn, long hint)
542 {
543 	struct bpp_softc *sc = kn->kn_hook;
544 
545 	if (sc->sc_flags & BPP_LOCKED)
546 		return (0);
547 
548 	kn->kn_data = 0;	/* XXXLUKEM (thorpej): what to put here? */
549 	return (1);
550 }
551 
552 static const struct filterops bppwrite_filtops =
553 	{ 1, NULL, filt_bppwdetach, filt_bpfwrite };
554 
555 int
556 bppkqfilter(dev_t dev, struct knote *kn)
557 {
558 	struct bpp_softc *sc = bpp_cd.cd_devs[BPPUNIT(dev)];
559 	struct klist *klist;
560 	int s;
561 
562 	switch (kn->kn_filter) {
563 	case EVFILT_READ:
564 		klist = &sc->sc_rsel.sel_klist;
565 		kn->kn_fop = &bppread_filtops;
566 		break;
567 
568 	case EVFILT_WRITE:
569 		klist = &sc->sc_wsel.sel_klist;
570 		kn->kn_fop = &bppwrite_filtops;
571 		break;
572 
573 	default:
574 		return (1);
575 	}
576 
577 	kn->kn_hook = sc;
578 
579 	s = splbpp();
580 	SLIST_INSERT_HEAD(klist, kn, kn_selnext);
581 	splx(s);
582 
583 	return (0);
584 }
585 
586 int
587 bppintr(arg)
588 	void *arg;
589 {
590 	struct bpp_softc *sc = arg;
591 	struct lsi64854_softc *lsi = &sc->sc_lsi64854;
592 	u_int16_t irq;
593 
594 	/* First handle any possible DMA interrupts */
595 	if (lsi64854_pp_intr((void *)lsi) == -1)
596 		sc->sc_error = 1;
597 
598 	irq = bus_space_read_2(lsi->sc_bustag, lsi->sc_regs, L64854_REG_ICR);
599 	/* Ack all interrupts */
600 	bus_space_write_2(lsi->sc_bustag, lsi->sc_regs, L64854_REG_ICR,
601 			  irq | BPP_ALLIRQ);
602 
603 	DPRINTF(("bpp_intr: %x\n", irq));
604 	/* Did our device interrupt? */
605 	if ((irq & BPP_ALLIRQ) == 0)
606 		return (0);
607 
608 	if ((sc->sc_flags & BPP_LOCKED) != 0)
609 		wakeup(sc);
610 	else if ((sc->sc_flags & BPP_WANT) != 0) {
611 		sc->sc_flags &= ~BPP_WANT;
612 		wakeup(sc->sc_buf);
613 	} else {
614 		selnotify(&sc->sc_wsel, 0);
615 		if (sc->sc_asyncproc != NULL)
616 			psignal(sc->sc_asyncproc, SIGIO);
617 	}
618 	return (1);
619 }
620