1 /* $NetBSD: rf_driver.c,v 1.104 2004/06/29 17:09:01 oster Exp $ */ 2 /*- 3 * Copyright (c) 1999 The NetBSD Foundation, Inc. 4 * All rights reserved. 5 * 6 * This code is derived from software contributed to The NetBSD Foundation 7 * by Greg Oster 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed by the NetBSD 20 * Foundation, Inc. and its contributors. 21 * 4. Neither the name of The NetBSD Foundation nor the names of its 22 * contributors may be used to endorse or promote products derived 23 * from this software without specific prior written permission. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 26 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 35 * POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38 /* 39 * Copyright (c) 1995 Carnegie-Mellon University. 40 * All rights reserved. 41 * 42 * Author: Mark Holland, Khalil Amiri, Claudson Bornstein, William V. Courtright II, 43 * Robby Findler, Daniel Stodolsky, Rachad Youssef, Jim Zelenka 44 * 45 * Permission to use, copy, modify and distribute this software and 46 * its documentation is hereby granted, provided that both the copyright 47 * notice and this permission notice appear in all copies of the 48 * software, derivative works or modified versions, and any portions 49 * thereof, and that both notices appear in supporting documentation. 50 * 51 * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" 52 * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND 53 * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. 54 * 55 * Carnegie Mellon requests users of this software to return to 56 * 57 * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU 58 * School of Computer Science 59 * Carnegie Mellon University 60 * Pittsburgh PA 15213-3890 61 * 62 * any improvements or extensions that they make and grant Carnegie the 63 * rights to redistribute these changes. 64 */ 65 66 /****************************************************************************** 67 * 68 * rf_driver.c -- main setup, teardown, and access routines for the RAID driver 69 * 70 * all routines are prefixed with rf_ (raidframe), to avoid conficts. 71 * 72 ******************************************************************************/ 73 74 75 #include <sys/cdefs.h> 76 __KERNEL_RCSID(0, "$NetBSD: rf_driver.c,v 1.104 2004/06/29 17:09:01 oster Exp $"); 77 78 #include "opt_raid_diagnostic.h" 79 80 #include <sys/param.h> 81 #include <sys/systm.h> 82 #include <sys/ioctl.h> 83 #include <sys/fcntl.h> 84 #include <sys/vnode.h> 85 86 87 #include "rf_archs.h" 88 #include "rf_threadstuff.h" 89 90 #include <sys/errno.h> 91 92 #include "rf_raid.h" 93 #include "rf_dag.h" 94 #include "rf_aselect.h" 95 #include "rf_diskqueue.h" 96 #include "rf_parityscan.h" 97 #include "rf_alloclist.h" 98 #include "rf_dagutils.h" 99 #include "rf_utils.h" 100 #include "rf_etimer.h" 101 #include "rf_acctrace.h" 102 #include "rf_general.h" 103 #include "rf_desc.h" 104 #include "rf_states.h" 105 #include "rf_decluster.h" 106 #include "rf_map.h" 107 #include "rf_revent.h" 108 #include "rf_callback.h" 109 #include "rf_engine.h" 110 #include "rf_mcpair.h" 111 #include "rf_nwayxor.h" 112 #include "rf_copyback.h" 113 #include "rf_driver.h" 114 #include "rf_options.h" 115 #include "rf_shutdown.h" 116 #include "rf_kintf.h" 117 118 #include <sys/buf.h> 119 120 #ifndef RF_ACCESS_DEBUG 121 #define RF_ACCESS_DEBUG 0 122 #endif 123 124 /* rad == RF_RaidAccessDesc_t */ 125 RF_DECLARE_MUTEX(rf_rad_lock) 126 #define RF_MAX_FREE_RAD 128 127 #define RF_MIN_FREE_RAD 32 128 129 /* debug variables */ 130 char rf_panicbuf[2048]; /* a buffer to hold an error msg when we panic */ 131 132 /* main configuration routines */ 133 static int raidframe_booted = 0; 134 135 static void rf_ConfigureDebug(RF_Config_t * cfgPtr); 136 static void set_debug_option(char *name, long val); 137 static void rf_UnconfigureArray(void); 138 static void rf_ShutdownRDFreeList(void *); 139 static int rf_ConfigureRDFreeList(RF_ShutdownList_t **); 140 141 RF_DECLARE_MUTEX(rf_printf_mutex) /* debug only: avoids interleaved 142 * printfs by different stripes */ 143 144 #define SIGNAL_QUIESCENT_COND(_raid_) wakeup(&((_raid_)->accesses_suspended)) 145 #define WAIT_FOR_QUIESCENCE(_raid_) \ 146 ltsleep(&((_raid_)->accesses_suspended), PRIBIO, \ 147 "raidframe quiesce", 0, &((_raid_)->access_suspend_mutex)) 148 149 static int configureCount = 0; /* number of active configurations */ 150 static int isconfigged = 0; /* is basic raidframe (non per-array) 151 * stuff configged */ 152 RF_DECLARE_LKMGR_STATIC_MUTEX(configureMutex) /* used to lock the configuration 153 * stuff */ 154 static RF_ShutdownList_t *globalShutdown; /* non array-specific 155 * stuff */ 156 157 static int rf_ConfigureRDFreeList(RF_ShutdownList_t ** listp); 158 static int rf_AllocEmergBuffers(RF_Raid_t *); 159 static void rf_FreeEmergBuffers(RF_Raid_t *); 160 161 /* called at system boot time */ 162 int 163 rf_BootRaidframe() 164 { 165 166 if (raidframe_booted) 167 return (EBUSY); 168 raidframe_booted = 1; 169 lockinit(&configureMutex, PRIBIO, "RAIDframe lock", 0, 0); 170 configureCount = 0; 171 isconfigged = 0; 172 globalShutdown = NULL; 173 return (0); 174 } 175 176 /* 177 * Called whenever an array is shutdown 178 */ 179 static void 180 rf_UnconfigureArray() 181 { 182 183 RF_LOCK_LKMGR_MUTEX(configureMutex); 184 if (--configureCount == 0) { /* if no active configurations, shut 185 * everything down */ 186 isconfigged = 0; 187 rf_ShutdownList(&globalShutdown); 188 189 /* 190 * We must wait until now, because the AllocList module 191 * uses the DebugMem module. 192 */ 193 #if RF_DEBUG_MEM 194 if (rf_memDebug) 195 rf_print_unfreed(); 196 #endif 197 } 198 RF_UNLOCK_LKMGR_MUTEX(configureMutex); 199 } 200 201 /* 202 * Called to shut down an array. 203 */ 204 int 205 rf_Shutdown(RF_Raid_t *raidPtr) 206 { 207 208 if (!raidPtr->valid) { 209 RF_ERRORMSG("Attempt to shut down unconfigured RAIDframe driver. Aborting shutdown\n"); 210 return (EINVAL); 211 } 212 /* 213 * wait for outstanding IOs to land 214 * As described in rf_raid.h, we use the rad_freelist lock 215 * to protect the per-array info about outstanding descs 216 * since we need to do freelist locking anyway, and this 217 * cuts down on the amount of serialization we've got going 218 * on. 219 */ 220 RF_LOCK_MUTEX(rf_rad_lock); 221 if (raidPtr->waitShutdown) { 222 RF_UNLOCK_MUTEX(rf_rad_lock); 223 return (EBUSY); 224 } 225 raidPtr->waitShutdown = 1; 226 while (raidPtr->nAccOutstanding) { 227 RF_WAIT_COND(raidPtr->outstandingCond, rf_rad_lock); 228 } 229 RF_UNLOCK_MUTEX(rf_rad_lock); 230 231 /* Wait for any parity re-writes to stop... */ 232 while (raidPtr->parity_rewrite_in_progress) { 233 printf("Waiting for parity re-write to exit...\n"); 234 tsleep(&raidPtr->parity_rewrite_in_progress, PRIBIO, 235 "rfprwshutdown", 0); 236 } 237 238 raidPtr->valid = 0; 239 240 rf_update_component_labels(raidPtr, RF_FINAL_COMPONENT_UPDATE); 241 242 rf_UnconfigureVnodes(raidPtr); 243 244 rf_FreeEmergBuffers(raidPtr); 245 246 rf_ShutdownList(&raidPtr->shutdownList); 247 248 rf_UnconfigureArray(); 249 250 return (0); 251 } 252 253 254 #define DO_INIT_CONFIGURE(f) { \ 255 rc = f (&globalShutdown); \ 256 if (rc) { \ 257 RF_ERRORMSG2("RAIDFRAME: failed %s with %d\n", RF_STRING(f), rc); \ 258 rf_ShutdownList(&globalShutdown); \ 259 configureCount--; \ 260 RF_UNLOCK_LKMGR_MUTEX(configureMutex); \ 261 return(rc); \ 262 } \ 263 } 264 265 #define DO_RAID_FAIL() { \ 266 rf_UnconfigureVnodes(raidPtr); \ 267 rf_FreeEmergBuffers(raidPtr); \ 268 rf_ShutdownList(&raidPtr->shutdownList); \ 269 rf_UnconfigureArray(); \ 270 } 271 272 #define DO_RAID_INIT_CONFIGURE(f) { \ 273 rc = f (&raidPtr->shutdownList, raidPtr, cfgPtr); \ 274 if (rc) { \ 275 RF_ERRORMSG2("RAIDFRAME: failed %s with %d\n", RF_STRING(f), rc); \ 276 DO_RAID_FAIL(); \ 277 return(rc); \ 278 } \ 279 } 280 281 #define DO_RAID_MUTEX(_m_) { \ 282 rf_mutex_init((_m_)); \ 283 } 284 285 int 286 rf_Configure(RF_Raid_t *raidPtr, RF_Config_t *cfgPtr, RF_AutoConfig_t *ac) 287 { 288 RF_RowCol_t col; 289 int rc; 290 291 RF_LOCK_LKMGR_MUTEX(configureMutex); 292 configureCount++; 293 if (isconfigged == 0) { 294 rf_mutex_init(&rf_printf_mutex); 295 296 /* initialize globals */ 297 298 DO_INIT_CONFIGURE(rf_ConfigureAllocList); 299 300 /* 301 * Yes, this does make debugging general to the whole 302 * system instead of being array specific. Bummer, drag. 303 */ 304 rf_ConfigureDebug(cfgPtr); 305 DO_INIT_CONFIGURE(rf_ConfigureDebugMem); 306 #if RF_ACC_TRACE > 0 307 DO_INIT_CONFIGURE(rf_ConfigureAccessTrace); 308 #endif 309 DO_INIT_CONFIGURE(rf_ConfigureMapModule); 310 DO_INIT_CONFIGURE(rf_ConfigureReconEvent); 311 DO_INIT_CONFIGURE(rf_ConfigureCallback); 312 DO_INIT_CONFIGURE(rf_ConfigureRDFreeList); 313 DO_INIT_CONFIGURE(rf_ConfigureNWayXor); 314 DO_INIT_CONFIGURE(rf_ConfigureStripeLockFreeList); 315 DO_INIT_CONFIGURE(rf_ConfigureMCPair); 316 DO_INIT_CONFIGURE(rf_ConfigureDAGs); 317 DO_INIT_CONFIGURE(rf_ConfigureDAGFuncs); 318 DO_INIT_CONFIGURE(rf_ConfigureReconstruction); 319 DO_INIT_CONFIGURE(rf_ConfigureCopyback); 320 DO_INIT_CONFIGURE(rf_ConfigureDiskQueueSystem); 321 isconfigged = 1; 322 } 323 RF_UNLOCK_LKMGR_MUTEX(configureMutex); 324 325 DO_RAID_MUTEX(&raidPtr->mutex); 326 /* set up the cleanup list. Do this after ConfigureDebug so that 327 * value of memDebug will be set */ 328 329 rf_MakeAllocList(raidPtr->cleanupList); 330 if (raidPtr->cleanupList == NULL) { 331 DO_RAID_FAIL(); 332 return (ENOMEM); 333 } 334 rf_ShutdownCreate(&raidPtr->shutdownList, 335 (void (*) (void *)) rf_FreeAllocList, 336 raidPtr->cleanupList); 337 338 raidPtr->numCol = cfgPtr->numCol; 339 raidPtr->numSpare = cfgPtr->numSpare; 340 341 raidPtr->status = rf_rs_optimal; 342 raidPtr->reconControl = NULL; 343 344 TAILQ_INIT(&(raidPtr->iodone)); 345 simple_lock_init(&(raidPtr->iodone_lock)); 346 347 DO_RAID_INIT_CONFIGURE(rf_ConfigureEngine); 348 DO_RAID_INIT_CONFIGURE(rf_ConfigureStripeLocks); 349 350 raidPtr->outstandingCond = 0; 351 352 raidPtr->nAccOutstanding = 0; 353 raidPtr->waitShutdown = 0; 354 355 DO_RAID_MUTEX(&raidPtr->access_suspend_mutex); 356 357 raidPtr->waitForReconCond = 0; 358 359 if (ac!=NULL) { 360 /* We have an AutoConfig structure.. Don't do the 361 normal disk configuration... call the auto config 362 stuff */ 363 rf_AutoConfigureDisks(raidPtr, cfgPtr, ac); 364 } else { 365 DO_RAID_INIT_CONFIGURE(rf_ConfigureDisks); 366 DO_RAID_INIT_CONFIGURE(rf_ConfigureSpareDisks); 367 } 368 /* do this after ConfigureDisks & ConfigureSpareDisks to be sure dev 369 * no. is set */ 370 DO_RAID_INIT_CONFIGURE(rf_ConfigureDiskQueues); 371 372 DO_RAID_INIT_CONFIGURE(rf_ConfigureLayout); 373 374 DO_RAID_INIT_CONFIGURE(rf_ConfigurePSStatus); 375 376 #if RF_INCLUDE_CHAINDECLUSTER > 0 377 for (col = 0; col < raidPtr->numCol; col++) { 378 /* 379 * XXX better distribution 380 */ 381 raidPtr->hist_diskreq[col] = 0; 382 } 383 #endif 384 raidPtr->numNewFailures = 0; 385 raidPtr->copyback_in_progress = 0; 386 raidPtr->parity_rewrite_in_progress = 0; 387 raidPtr->adding_hot_spare = 0; 388 raidPtr->recon_in_progress = 0; 389 raidPtr->maxOutstanding = cfgPtr->maxOutstandingDiskReqs; 390 391 /* autoconfigure and root_partition will actually get filled in 392 after the config is done */ 393 raidPtr->autoconfigure = 0; 394 raidPtr->root_partition = 0; 395 raidPtr->last_unit = raidPtr->raidid; 396 raidPtr->config_order = 0; 397 398 if (rf_keepAccTotals) { 399 raidPtr->keep_acc_totals = 1; 400 } 401 402 /* Allocate a bunch of buffers to be used in low-memory conditions */ 403 raidPtr->iobuf = NULL; 404 405 rc = rf_AllocEmergBuffers(raidPtr); 406 if (rc) { 407 printf("raid%d: Unable to allocate emergency buffers.\n", 408 raidPtr->raidid); 409 DO_RAID_FAIL(); 410 return(rc); 411 } 412 413 raidPtr->valid = 1; 414 415 printf("raid%d: %s\n", raidPtr->raidid, 416 raidPtr->Layout.map->configName); 417 printf("raid%d: Components:", raidPtr->raidid); 418 419 for (col = 0; col < raidPtr->numCol; col++) { 420 printf(" %s", raidPtr->Disks[col].devname); 421 if (RF_DEAD_DISK(raidPtr->Disks[col].status)) { 422 printf("[**FAILED**]"); 423 } 424 } 425 printf("\n"); 426 printf("raid%d: Total Sectors: %lu (%lu MB)\n", 427 raidPtr->raidid, 428 (unsigned long) raidPtr->totalSectors, 429 (unsigned long) (raidPtr->totalSectors / 1024 * 430 (1 << raidPtr->logBytesPerSector) / 1024)); 431 432 return (0); 433 } 434 435 436 /* 437 438 Routines to allocate and free the "emergency buffers" for a given 439 RAID set. These emergency buffers will be used when the kernel runs 440 out of kernel memory. 441 442 */ 443 444 static int 445 rf_AllocEmergBuffers(RF_Raid_t *raidPtr) 446 { 447 void *tmpbuf; 448 RF_VoidPointerListElem_t *vple; 449 int i; 450 451 /* XXX next line needs tuning... */ 452 raidPtr->numEmergencyBuffers = 10 * raidPtr->numCol; 453 #if DEBUG 454 printf("raid%d: allocating %d buffers of %d bytes.\n", 455 raidPtr->raidid, 456 raidPtr->numEmergencyBuffers, 457 (int)(raidPtr->Layout.sectorsPerStripeUnit << 458 raidPtr->logBytesPerSector)); 459 #endif 460 for (i = 0; i < raidPtr->numEmergencyBuffers; i++) { 461 tmpbuf = malloc( raidPtr->Layout.sectorsPerStripeUnit << 462 raidPtr->logBytesPerSector, 463 M_RAIDFRAME, M_NOWAIT); 464 if (tmpbuf) { 465 vple = rf_AllocVPListElem(); 466 vple->p= tmpbuf; 467 vple->next = raidPtr->iobuf; 468 raidPtr->iobuf = vple; 469 raidPtr->iobuf_count++; 470 } else { 471 printf("raid%d: failed to allocate emergency buffer!\n", 472 raidPtr->raidid); 473 break; 474 } 475 } 476 477 /* XXX next line needs tuning too... */ 478 raidPtr->numEmergencyStripeBuffers = 10; 479 for (i = 0; i < raidPtr->numEmergencyStripeBuffers; i++) { 480 tmpbuf = malloc( raidPtr->numCol * (raidPtr->Layout.sectorsPerStripeUnit << 481 raidPtr->logBytesPerSector), 482 M_RAIDFRAME, M_NOWAIT); 483 if (tmpbuf) { 484 vple = rf_AllocVPListElem(); 485 vple->p= tmpbuf; 486 vple->next = raidPtr->stripebuf; 487 raidPtr->stripebuf = vple; 488 raidPtr->stripebuf_count++; 489 } else { 490 printf("raid%d: failed to allocate emergency stripe buffer!\n", 491 raidPtr->raidid); 492 break; 493 } 494 } 495 496 return (0); 497 } 498 499 static void 500 rf_FreeEmergBuffers(RF_Raid_t *raidPtr) 501 { 502 RF_VoidPointerListElem_t *tmp; 503 504 /* Free the emergency IO buffers */ 505 while (raidPtr->iobuf != NULL) { 506 tmp = raidPtr->iobuf; 507 raidPtr->iobuf = raidPtr->iobuf->next; 508 free(tmp->p, M_RAIDFRAME); 509 rf_FreeVPListElem(tmp); 510 } 511 512 /* Free the emergency stripe buffers */ 513 while (raidPtr->stripebuf != NULL) { 514 tmp = raidPtr->stripebuf; 515 raidPtr->stripebuf = raidPtr->stripebuf->next; 516 free(tmp->p, M_RAIDFRAME); 517 rf_FreeVPListElem(tmp); 518 } 519 } 520 521 522 static void 523 rf_ShutdownRDFreeList(void *ignored) 524 { 525 pool_destroy(&rf_pools.rad); 526 } 527 528 static int 529 rf_ConfigureRDFreeList(RF_ShutdownList_t **listp) 530 { 531 532 rf_pool_init(&rf_pools.rad, sizeof(RF_RaidAccessDesc_t), 533 "rf_rad_pl", RF_MIN_FREE_RAD, RF_MAX_FREE_RAD); 534 rf_ShutdownCreate(listp, rf_ShutdownRDFreeList, NULL); 535 simple_lock_init(&rf_rad_lock); 536 return (0); 537 } 538 539 RF_RaidAccessDesc_t * 540 rf_AllocRaidAccDesc(RF_Raid_t *raidPtr, RF_IoType_t type, 541 RF_RaidAddr_t raidAddress, RF_SectorCount_t numBlocks, 542 caddr_t bufPtr, void *bp, RF_RaidAccessFlags_t flags, 543 const RF_AccessState_t *states) 544 { 545 RF_RaidAccessDesc_t *desc; 546 547 desc = pool_get(&rf_pools.rad, PR_WAITOK); 548 549 RF_LOCK_MUTEX(rf_rad_lock); 550 if (raidPtr->waitShutdown) { 551 /* 552 * Actually, we're shutting the array down. Free the desc 553 * and return NULL. 554 */ 555 556 RF_UNLOCK_MUTEX(rf_rad_lock); 557 pool_put(&rf_pools.rad, desc); 558 return (NULL); 559 } 560 raidPtr->nAccOutstanding++; 561 562 RF_UNLOCK_MUTEX(rf_rad_lock); 563 564 desc->raidPtr = (void *) raidPtr; 565 desc->type = type; 566 desc->raidAddress = raidAddress; 567 desc->numBlocks = numBlocks; 568 desc->bufPtr = bufPtr; 569 desc->bp = bp; 570 desc->flags = flags; 571 desc->states = states; 572 desc->state = 0; 573 desc->dagList = NULL; 574 575 desc->status = 0; 576 #if RF_ACC_TRACE > 0 577 memset((char *) &desc->tracerec, 0, sizeof(RF_AccTraceEntry_t)); 578 #endif 579 desc->callbackFunc = NULL; 580 desc->callbackArg = NULL; 581 desc->next = NULL; 582 desc->iobufs = NULL; 583 desc->stripebufs = NULL; 584 585 return (desc); 586 } 587 588 void 589 rf_FreeRaidAccDesc(RF_RaidAccessDesc_t *desc) 590 { 591 RF_Raid_t *raidPtr = desc->raidPtr; 592 RF_DagList_t *dagList, *temp; 593 RF_VoidPointerListElem_t *tmp; 594 595 RF_ASSERT(desc); 596 597 /* Cleanup the dagList(s) */ 598 dagList = desc->dagList; 599 while(dagList != NULL) { 600 temp = dagList; 601 dagList = dagList->next; 602 rf_FreeDAGList(temp); 603 } 604 605 while (desc->iobufs) { 606 tmp = desc->iobufs; 607 desc->iobufs = desc->iobufs->next; 608 rf_FreeIOBuffer(raidPtr, tmp); 609 } 610 611 while (desc->stripebufs) { 612 tmp = desc->stripebufs; 613 desc->stripebufs = desc->stripebufs->next; 614 rf_FreeStripeBuffer(raidPtr, tmp); 615 } 616 617 pool_put(&rf_pools.rad, desc); 618 RF_LOCK_MUTEX(rf_rad_lock); 619 raidPtr->nAccOutstanding--; 620 if (raidPtr->waitShutdown) { 621 RF_SIGNAL_COND(raidPtr->outstandingCond); 622 } 623 RF_UNLOCK_MUTEX(rf_rad_lock); 624 } 625 /********************************************************************* 626 * Main routine for performing an access. 627 * Accesses are retried until a DAG can not be selected. This occurs 628 * when either the DAG library is incomplete or there are too many 629 * failures in a parity group. 630 * 631 * type should be read or write async_flag should be RF_TRUE or 632 * RF_FALSE bp_in is a buf pointer. void * to facilitate ignoring it 633 * outside the kernel 634 ********************************************************************/ 635 int 636 rf_DoAccess(RF_Raid_t * raidPtr, RF_IoType_t type, int async_flag, 637 RF_RaidAddr_t raidAddress, RF_SectorCount_t numBlocks, 638 caddr_t bufPtr, void *bp_in, RF_RaidAccessFlags_t flags) 639 { 640 RF_RaidAccessDesc_t *desc; 641 caddr_t lbufPtr = bufPtr; 642 struct buf *bp = (struct buf *) bp_in; 643 644 raidAddress += rf_raidSectorOffset; 645 646 #if RF_ACCESS_DEBUG 647 if (rf_accessDebug) { 648 649 printf("logBytes is: %d %d %d\n", raidPtr->raidid, 650 raidPtr->logBytesPerSector, 651 (int) rf_RaidAddressToByte(raidPtr, numBlocks)); 652 printf("raid%d: %s raidAddr %d (stripeid %d-%d) numBlocks %d (%d bytes) buf 0x%lx\n", raidPtr->raidid, 653 (type == RF_IO_TYPE_READ) ? "READ" : "WRITE", (int) raidAddress, 654 (int) rf_RaidAddressToStripeID(&raidPtr->Layout, raidAddress), 655 (int) rf_RaidAddressToStripeID(&raidPtr->Layout, raidAddress + numBlocks - 1), 656 (int) numBlocks, 657 (int) rf_RaidAddressToByte(raidPtr, numBlocks), 658 (long) bufPtr); 659 } 660 #endif 661 662 desc = rf_AllocRaidAccDesc(raidPtr, type, raidAddress, 663 numBlocks, lbufPtr, bp, flags, raidPtr->Layout.map->states); 664 665 if (desc == NULL) { 666 return (ENOMEM); 667 } 668 #if RF_ACC_TRACE > 0 669 RF_ETIMER_START(desc->tracerec.tot_timer); 670 #endif 671 desc->async_flag = async_flag; 672 673 rf_ContinueRaidAccess(desc); 674 675 return (0); 676 } 677 #if 0 678 /* force the array into reconfigured mode without doing reconstruction */ 679 int 680 rf_SetReconfiguredMode(RF_Raid_t *raidPtr, int col) 681 { 682 if (!(raidPtr->Layout.map->flags & RF_DISTRIBUTE_SPARE)) { 683 printf("Can't set reconfigured mode in dedicated-spare array\n"); 684 RF_PANIC(); 685 } 686 RF_LOCK_MUTEX(raidPtr->mutex); 687 raidPtr->numFailures++; 688 raidPtr->Disks[col].status = rf_ds_dist_spared; 689 raidPtr->status = rf_rs_reconfigured; 690 rf_update_component_labels(raidPtr, RF_NORMAL_COMPONENT_UPDATE); 691 /* install spare table only if declustering + distributed sparing 692 * architecture. */ 693 if (raidPtr->Layout.map->flags & RF_BD_DECLUSTERED) 694 rf_InstallSpareTable(raidPtr, col); 695 RF_UNLOCK_MUTEX(raidPtr->mutex); 696 return (0); 697 } 698 #endif 699 700 int 701 rf_FailDisk(RF_Raid_t *raidPtr, int fcol, int initRecon) 702 { 703 704 /* need to suspend IO's here -- if there are DAGs in flight 705 and we pull the rug out from under ci_vp, Bad Things 706 can happen. */ 707 708 rf_SuspendNewRequestsAndWait(raidPtr); 709 710 RF_LOCK_MUTEX(raidPtr->mutex); 711 if (raidPtr->Disks[fcol].status != rf_ds_failed) { 712 /* must be failing something that is valid, or else it's 713 already marked as failed (in which case we don't 714 want to mark it failed again!) */ 715 raidPtr->numFailures++; 716 raidPtr->Disks[fcol].status = rf_ds_failed; 717 raidPtr->status = rf_rs_degraded; 718 } 719 RF_UNLOCK_MUTEX(raidPtr->mutex); 720 721 rf_update_component_labels(raidPtr, RF_NORMAL_COMPONENT_UPDATE); 722 723 /* Close the component, so that it's not "locked" if someone 724 else want's to use it! */ 725 726 rf_close_component(raidPtr, raidPtr->raid_cinfo[fcol].ci_vp, 727 raidPtr->Disks[fcol].auto_configured); 728 729 RF_LOCK_MUTEX(raidPtr->mutex); 730 raidPtr->raid_cinfo[fcol].ci_vp = NULL; 731 732 /* Need to mark the component as not being auto_configured 733 (in case it was previously). */ 734 735 raidPtr->Disks[fcol].auto_configured = 0; 736 RF_UNLOCK_MUTEX(raidPtr->mutex); 737 /* now we can allow IO to continue -- we'll be suspending it 738 again in rf_ReconstructFailedDisk() if we have to.. */ 739 740 rf_ResumeNewRequests(raidPtr); 741 742 if (initRecon) 743 rf_ReconstructFailedDisk(raidPtr, fcol); 744 return (0); 745 } 746 /* releases a thread that is waiting for the array to become quiesced. 747 * access_suspend_mutex should be locked upon calling this 748 */ 749 void 750 rf_SignalQuiescenceLock(RF_Raid_t *raidPtr) 751 { 752 #if RF_DEBUG_QUIESCE 753 if (rf_quiesceDebug) { 754 printf("raid%d: Signalling quiescence lock\n", 755 raidPtr->raidid); 756 } 757 #endif 758 raidPtr->access_suspend_release = 1; 759 760 if (raidPtr->waiting_for_quiescence) { 761 SIGNAL_QUIESCENT_COND(raidPtr); 762 } 763 } 764 /* suspends all new requests to the array. No effect on accesses that are in flight. */ 765 int 766 rf_SuspendNewRequestsAndWait(RF_Raid_t *raidPtr) 767 { 768 #if RF_DEBUG_QUIESCE 769 if (rf_quiesceDebug) 770 printf("raid%d: Suspending new reqs\n", raidPtr->raidid); 771 #endif 772 RF_LOCK_MUTEX(raidPtr->access_suspend_mutex); 773 raidPtr->accesses_suspended++; 774 raidPtr->waiting_for_quiescence = (raidPtr->accs_in_flight == 0) ? 0 : 1; 775 776 if (raidPtr->waiting_for_quiescence) { 777 raidPtr->access_suspend_release = 0; 778 while (!raidPtr->access_suspend_release) { 779 #if RF_DEBUG_QUIESCE 780 printf("raid%d: Suspending: Waiting for Quiescence\n", 781 raidPtr->raidid); 782 #endif 783 WAIT_FOR_QUIESCENCE(raidPtr); 784 raidPtr->waiting_for_quiescence = 0; 785 } 786 } 787 #if RF_DEBUG_QUIESCE 788 printf("raid%d: Quiescence reached..\n", raidPtr->raidid); 789 #endif 790 791 RF_UNLOCK_MUTEX(raidPtr->access_suspend_mutex); 792 return (raidPtr->waiting_for_quiescence); 793 } 794 /* wake up everyone waiting for quiescence to be released */ 795 void 796 rf_ResumeNewRequests(RF_Raid_t *raidPtr) 797 { 798 RF_CallbackDesc_t *t, *cb; 799 800 #if RF_DEBUG_QUIESCE 801 if (rf_quiesceDebug) 802 printf("Resuming new reqs\n"); 803 #endif 804 805 RF_LOCK_MUTEX(raidPtr->access_suspend_mutex); 806 raidPtr->accesses_suspended--; 807 if (raidPtr->accesses_suspended == 0) 808 cb = raidPtr->quiesce_wait_list; 809 else 810 cb = NULL; 811 raidPtr->quiesce_wait_list = NULL; 812 RF_UNLOCK_MUTEX(raidPtr->access_suspend_mutex); 813 814 while (cb) { 815 t = cb; 816 cb = cb->next; 817 (t->callbackFunc) (t->callbackArg); 818 rf_FreeCallbackDesc(t); 819 } 820 } 821 /***************************************************************************************** 822 * 823 * debug routines 824 * 825 ****************************************************************************************/ 826 827 static void 828 set_debug_option(char *name, long val) 829 { 830 RF_DebugName_t *p; 831 832 for (p = rf_debugNames; p->name; p++) { 833 if (!strcmp(p->name, name)) { 834 *(p->ptr) = val; 835 printf("[Set debug variable %s to %ld]\n", name, val); 836 return; 837 } 838 } 839 RF_ERRORMSG1("Unknown debug string \"%s\"\n", name); 840 } 841 842 843 /* would like to use sscanf here, but apparently not available in kernel */ 844 /*ARGSUSED*/ 845 static void 846 rf_ConfigureDebug(RF_Config_t *cfgPtr) 847 { 848 char *val_p, *name_p, *white_p; 849 long val; 850 int i; 851 852 rf_ResetDebugOptions(); 853 for (i = 0; cfgPtr->debugVars[i][0] && i < RF_MAXDBGV; i++) { 854 name_p = rf_find_non_white(&cfgPtr->debugVars[i][0]); 855 white_p = rf_find_white(name_p); /* skip to start of 2nd 856 * word */ 857 val_p = rf_find_non_white(white_p); 858 if (*val_p == '0' && *(val_p + 1) == 'x') 859 val = rf_htoi(val_p + 2); 860 else 861 val = rf_atoi(val_p); 862 *white_p = '\0'; 863 set_debug_option(name_p, val); 864 } 865 } 866 867 void 868 rf_print_panic_message(int line, char *file) 869 { 870 snprintf(rf_panicbuf, sizeof(rf_panicbuf), 871 "raidframe error at line %d file %s", line, file); 872 } 873 874 #ifdef RAID_DIAGNOSTIC 875 void 876 rf_print_assert_panic_message(int line, char *file, char *condition) 877 { 878 snprintf(rf_panicbuf, sizeof(rf_panicbuf), 879 "raidframe error at line %d file %s (failed asserting %s)\n", 880 line, file, condition); 881 } 882 #endif 883 884 void 885 rf_print_unable_to_init_mutex(char *file, int line, int rc) 886 { 887 RF_ERRORMSG3("Unable to init mutex file %s line %d rc=%d\n", 888 file, line, rc); 889 } 890 891 void 892 rf_print_unable_to_add_shutdown(char *file, int line, int rc) 893 { 894 RF_ERRORMSG3("Unable to add to shutdown list file %s line %d rc=%d\n", 895 file, line, rc); 896 } 897