1 /* $NetBSD: qd.c,v 1.53 2012/10/27 17:18:37 chs Exp $ */ 2 3 /*- 4 * Copyright (c) 1988 Regents of the University of California. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. Neither the name of the University nor the names of its contributors 16 * may be used to endorse or promote products derived from this software 17 * without specific prior written permission. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 * 31 * @(#)qd.c 7.1 (Berkeley) 6/28/91 32 */ 33 34 /************************************************************************ 35 * * 36 * Copyright (c) 1985-1988 by * 37 * Digital Equipment Corporation, Maynard, MA * 38 * All rights reserved. * 39 * * 40 * This software is furnished under a license and may be used and * 41 * copied only in accordance with the terms of such license and * 42 * with the inclusion of the above copyright notice. This * 43 * software or any other copies thereof may not be provided or * 44 * otherwise made available to any other person. No title to and * 45 * ownership of the software is hereby transferred. * 46 * * 47 * The information in this software is subject to change without * 48 * notice and should not be construed as a commitment by Digital * 49 * Equipment Corporation. * 50 * * 51 * Digital assumes no responsibility for the use or reliability * 52 * of its software on equipment which is not supplied by Digital. * 53 * * 54 *************************************************************************/ 55 56 /* 57 * qd.c - QDSS display driver for VAXSTATION-II GPX workstation 58 */ 59 60 #include <sys/cdefs.h> 61 __KERNEL_RCSID(0, "$NetBSD: qd.c,v 1.53 2012/10/27 17:18:37 chs Exp $"); 62 63 #include "opt_ddb.h" 64 65 #include "qd.h" 66 67 #include <sys/param.h> 68 #include <sys/systm.h> 69 #include <sys/conf.h> 70 #include <sys/tty.h> 71 #include <sys/kernel.h> 72 #include <sys/device.h> 73 #include <sys/poll.h> 74 #include <sys/buf.h> 75 76 #include <dev/cons.h> 77 78 #include <sys/bus.h> 79 #include <machine/scb.h> 80 81 #ifdef __vax__ 82 #include <machine/sid.h> 83 #include <sys/cpu.h> 84 #include <machine/pte.h> 85 #endif 86 87 #include <dev/qbus/ubavar.h> 88 89 #include <dev/qbus/qduser.h> 90 #include <dev/qbus/qdreg.h> 91 #include <dev/qbus/qdioctl.h> 92 93 #include "ioconf.h" 94 95 /* 96 * QDSS driver status flags for tracking operational state 97 */ 98 struct qdflags { 99 u_int inuse; /* which minor dev's are in use now */ 100 u_int config; /* I/O page register content */ 101 u_int mapped; /* user mapping status word */ 102 u_int kernel_loop; /* if kernel console is redirected */ 103 u_int user_dma; /* DMA from user space in progress */ 104 u_short pntr_id; /* type code of pointing device */ 105 u_short duart_imask; /* shadowing for duart intrpt mask reg */ 106 u_short adder_ie; /* shadowing for adder intrpt enbl reg */ 107 u_short curs_acc; /* cursor acceleration factor */ 108 u_short curs_thr; /* cursor acceleration threshold level */ 109 u_short tab_res; /* tablet resolution factor */ 110 u_short selmask; /* mask for active qd select entries */ 111 }; 112 113 /* 114 * Softc struct to keep track of all states in this driver. 115 */ 116 struct qd_softc { 117 bus_space_tag_t sc_iot; 118 bus_space_handle_t sc_ioh; 119 bus_dma_tag_t sc_dmat; 120 }; 121 122 /* 123 * bit definitions for 'inuse' entry 124 */ 125 #define CONS_DEV 0x01 126 #define GRAPHIC_DEV 0x04 127 128 /* 129 * bit definitions for 'mapped' member of flag structure 130 */ 131 #define MAPDEV 0x01 /* hardware is mapped */ 132 #define MAPDMA 0x02 /* DMA buffer mapped */ 133 #define MAPEQ 0x04 /* event queue buffer mapped */ 134 #define MAPSCR 0x08 /* scroll param area mapped */ 135 #define MAPCOLOR 0x10 /* color map writing buffer mapped */ 136 137 /* 138 * constants used in shared memory operations 139 */ 140 #define EVENT_BUFSIZE 1024 /* # of bytes per device's event buffer */ 141 #define MAXEVENTS ( (EVENT_BUFSIZE - sizeof(struct qdinput)) \ 142 / sizeof(struct _vs_event) ) 143 #define DMA_BUFSIZ (1024 * 10) 144 #define COLOR_BUFSIZ ((sizeof(struct color_buf) + 512) & ~0x01FF) 145 146 /* 147 * reference to an array of "uba_device" structures built by the auto 148 * configuration program. The uba_device structure decribes the device 149 * sufficiently for the driver to talk to it. The auto configuration code 150 * fills in the uba_device structures (located in ioconf.c) from user 151 * maintained info. 152 */ 153 struct uba_device *qdinfo[NQD]; /* array of pntrs to each QDSS's */ 154 struct tty *qd_tty[NQD*4]; /* teletype structures for each.. */ 155 volatile char *qvmem[NQD]; 156 volatile struct pte *QVmap[NQD]; 157 #define CHUNK (64 * 1024) 158 #define QMEMSIZE (1024 * 1024 * 4) /* 4 meg */ 159 160 /* 161 * static storage used by multiple functions in this code 162 */ 163 int Qbus_unmap[NQD]; /* Qbus mapper release code */ 164 struct qdmap qdmap[NQD]; /* QDSS register map structure */ 165 struct qdflags qdflags[NQD]; /* QDSS register map structure */ 166 void *qdbase[NQD]; /* base address of each QDSS unit */ 167 short qdopened[NQD]; /* graphics device is open exclusive use */ 168 169 /* 170 * the array "event_shared[]" is made up of a number of event queue buffers 171 * equal to the number of QDSS's configured into the running kernel (NQD). 172 * Each event queue buffer begins with an event queue header (struct qdinput) 173 * followed by a group of event queue entries (struct _vs_event). The array 174 * "*eq_header[]" is an array of pointers to the start of each event queue 175 * buffer in "event_shared[]". 176 */ 177 #define EQSIZE ((EVENT_BUFSIZE * NQD) + 512) 178 179 char event_shared[EQSIZE]; /* reserve space for event bufs */ 180 struct qdinput *eq_header[NQD]; /* event queue header pntrs */ 181 182 /* 183 * This allocation method reserves enough memory pages for NQD shared DMA I/O 184 * buffers. Each buffer must consume an integral number of memory pages to 185 * guarantee that a following buffer will begin on a page boundary. Also, 186 * enough space is allocated so that the FIRST I/O buffer can start at the 187 * 1st page boundary after "&DMA_shared". Page boundaries are used so that 188 * memory protections can be turned on/off for individual buffers. 189 */ 190 #define IOBUFSIZE ((DMA_BUFSIZ * NQD) + 512) 191 192 char DMA_shared[IOBUFSIZE]; /* reserve I/O buffer space */ 193 struct DMAreq_header *DMAheader[NQD]; /* DMA buffer header pntrs */ 194 195 /* 196 * The driver assists a client in scroll operations by loading dragon 197 * registers from an interrupt service routine. The loading is done using 198 * parameters found in memory shrade between the driver and it's client. 199 * The scroll parameter structures are ALL loacted in the same memory page 200 * for reasons of memory economy. 201 */ 202 char scroll_shared[2 * 512]; /* reserve space for scroll structs */ 203 struct scroll *scroll[NQD]; /* pointers to scroll structures */ 204 205 /* 206 * the driver is programmable to provide the user with color map write 207 * services at VSYNC interrupt time. At interrupt time the driver loads 208 * the color map with any user-requested load data found in shared memory 209 */ 210 #define COLOR_SHARED ((COLOR_BUFSIZ * NQD) + 512) 211 212 char color_shared[COLOR_SHARED]; /* reserve space: color bufs */ 213 struct color_buf *color_buf[NQD]; /* pointers to color bufs */ 214 215 /* 216 * mouse input event structures 217 */ 218 struct mouse_report last_rep[NQD]; 219 struct mouse_report current_rep[NQD]; 220 221 struct selinfo qdrsel[NQD]; /* process waiting for select */ 222 struct _vs_cursor cursor[NQD]; /* console cursor */ 223 int qdcount = 0; /* count of successfully probed qd's */ 224 int nNQD = NQD; 225 int DMAbuf_size = DMA_BUFSIZ; 226 int QDlast_DMAtype; /* type of the last DMA operation */ 227 228 /* 229 * macro to get system time. Used to time stamp event queue entries 230 */ 231 #define TOY ((time.tv_sec * 100) + (time.tv_usec / 10000)) 232 233 void qd_attach(device_t, device_t, void *); 234 static int qd_match(device_t, cfdata_t, void *); 235 236 static void qddint(void *); /* DMA gate array intrpt service */ 237 static void qdaint(void *); /* Dragon ADDER intrpt service */ 238 static void qdiint(void *); 239 240 #define QDPRIOR (PZERO-1) /* must be negative */ 241 #define FALSE 0 242 #ifdef TRUE 243 #undef TRUE 244 #endif 245 #define TRUE ~FALSE 246 #define BAD -1 247 #define GOOD 0 248 249 /* 250 * macro to create a system virtual page number from system virtual adrs 251 */ 252 #define VTOP(x) (((int)x & ~0xC0000000) >> VAX_PGSHIFT) 253 254 /* 255 * QDSS register address offsets from start of QDSS address space 256 */ 257 #define QDSIZE (52 * 1024) /* size of entire QDSS foot print */ 258 #define TMPSIZE (16 * 1024) /* template RAM is 8k SHORT WORDS */ 259 #define TMPSTART 0x8000 /* offset of template RAM from base adrs */ 260 #define REGSIZE (5 * 512) /* regs touch 2.5k (5 pages) of addr space */ 261 #define REGSTART 0xC000 /* offset of reg pages from base adrs */ 262 #define ADDER (REGSTART+0x000) 263 #define DGA (REGSTART+0x200) 264 #define DUART (REGSTART+0x400) 265 #define MEMCSR (REGSTART+0x800) 266 #define CLRSIZE (3 * 512) /* color map size */ 267 #define CLRSTART (REGSTART+0xA00) /* color map start offset from base */ 268 /* 0x0C00 really */ 269 #define RED (CLRSTART+0x000) 270 #define BLUE (CLRSTART+0x200) 271 #define GREEN (CLRSTART+0x400) 272 273 274 /* 275 * QDSS minor device numbers. The *real* minor device numbers are in 276 * the bottom two bits of the major/minor device spec. Bits 2 and up are 277 * used to specify the QDSS device number (ie: which one?) 278 */ 279 280 #define CONS 0 281 #define GRAPHIC 2 282 283 /* 284 * console cursor bitmap (white block cursor) 285 */ 286 short cons_cursor[32] = { 287 /* A */ 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 288 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 289 /* B */ 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 290 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF, 0x00FF 291 }; 292 293 /* 294 * constants used in font operations 295 */ 296 #define CHARS 190 /* # of chars in the font */ 297 #define CHAR_HEIGHT 15 /* char height in pixels */ 298 #define CHAR_WIDTH 8 /* char width in pixels*/ 299 #define FONT_WIDTH (CHAR_WIDTH * CHARS) /* font width in pixels */ 300 #define ROWS CHAR_HEIGHT 301 #define FONT_X 0 /* font's off screen adrs */ 302 #define FONT_Y (2048 - CHAR_HEIGHT) 303 304 /* Offset to second row characters (XXX - should remove) */ 305 #define FONT_OFFSET ((MAX_SCREEN_X/CHAR_WIDTH)*CHAR_HEIGHT) 306 307 extern char q_font[]; /* reference font object code */ 308 extern u_short q_key[]; /* reference key xlation tables */ 309 extern u_short q_shift_key[]; 310 extern char *q_special[]; 311 312 /* 313 * definitions for cursor acceleration reporting 314 */ 315 #define ACC_OFF 0x01 /* acceleration is inactive */ 316 317 /* 318 * virtual console support. 319 */ 320 extern struct cdevsw *consops; 321 cons_decl(qd); 322 void setup_dragon(int); 323 void init_shared(int); 324 void clear_qd_screen(int); 325 void ldfont(int); 326 void ldcursor(int, short *); 327 void setup_input(int); 328 void blitc(int, u_char); 329 void scroll_up(volatile struct adder *); 330 void write_ID(volatile struct adder *, short, short); 331 int wait_status(volatile struct adder *, int); 332 void led_control(int, int, int); 333 void qdstart(struct tty *); 334 void qdearly(void); 335 int qdpolling = 0; 336 337 dev_type_open(qdopen); 338 dev_type_close(qdclose); 339 dev_type_read(qdread); 340 dev_type_write(qdwrite); 341 dev_type_ioctl(qdioctl); 342 dev_type_stop(qdstop); 343 dev_type_poll(qdpoll); 344 dev_type_kqfilter(qdkqfilter); 345 346 const struct cdevsw qd_cdevsw = { 347 qdopen, qdclose, qdread, qdwrite, qdioctl, 348 qdstop, notty, qdpoll, nommap, qdkqfilter, 349 }; 350 351 /* 352 * LK-201 state storage for input console keyboard conversion to ASCII 353 */ 354 struct q_keyboard { 355 int shift; /* state variables */ 356 int cntrl; 357 int lock; 358 int lastcode; /* last keycode typed */ 359 unsigned kup[8]; /* bits for each keycode*/ 360 unsigned dkeys[8]; /* down/up mode keys */ 361 char last; /* last character */ 362 } q_keyboard; 363 364 /* 365 * tty settings on first open 366 */ 367 #define IFLAG (BRKINT|ISTRIP|IXON|IXANY|ICRNL|IMAXBEL) 368 #define OFLAG (OPOST|OXTABS|ONLCR) 369 #define LFLAG (ISIG|ICANON|ECHO|IEXTEN) 370 #define CFLAG (PARENB|CREAD|CS7|CLOCAL) 371 372 /* 373 * Kernel virtual addresses where we can map in the QBUS io page and the 374 * QDSS memory during qdcninit. pmap_bootstrap fills this in. 375 */ 376 void *qd_ubaio; 377 378 /* This is the QDSS unit 0 CSR. It is hard-coded in here so that the 379 * QDSS can be used as the console. The console routines don't get 380 * any config info. The ROM also autodetects at this address, so 381 * the console QDSS should be at this address. Furthermore, nothing 382 * else shuld be at this address instead because that would confuse the 383 * ROM and this driver. 384 */ 385 #define QDSSCSR 0x1F00 386 387 volatile u_short *qdaddr; /* Virtual address for QDSS CSR */ 388 389 /* 390 * This flag is set to 1 if the console initialization (qdcninit) 391 * has been performed on qd0. That initialization is required and must 392 * be done before the device probe routine. 393 */ 394 int qd0cninited = 0, qd0iscons = 0; 395 396 /* 397 * Do early check if the qdss is console. If not; don't allocate 398 * any memory for it in bootstrap. 399 */ 400 void 401 qdearly(void) 402 { 403 extern vaddr_t virtual_avail; 404 int tmp; 405 406 /* Make sure we're running on a system that can have a QDSS */ 407 if (vax_boardtype == VAX_BTYP_630) { 408 /* Now check some undocumented flag */ 409 if ((*(int *)(0x200B801E) & 0x60) == 0) 410 /* The KA630 isn't using a QDSS as the console, 411 * so we won't either */ 412 return; 413 } else if (vax_boardtype != VAX_BTYP_650) 414 return; 415 416 /* How to check for console on KA650? We assume that if there is a 417 * QDSS, it is console. 418 */ 419 #define QIOPAGE 0x20000000 /* XXX */ 420 #define UBAIOPAGES 16 421 tmp = QIOPAGE + ubdevreg(QDSSCSR); 422 if (badaddr((void *)tmp, sizeof(short))) 423 return; 424 425 MAPVIRT(qvmem[0], 64 * 1024 * NQD / VAX_NBPG); 426 MAPVIRT(qd_ubaio, 16); 427 pmap_map((int)qd_ubaio, QIOPAGE, QIOPAGE + UBAIOPAGES * VAX_NBPG, 428 VM_PROT_READ|VM_PROT_WRITE); 429 qdaddr = (u_short *)((u_int)qd_ubaio + ubdevreg(QDSSCSR)); 430 qd0iscons = 1; 431 } 432 433 void 434 qdcnprobe(struct consdev *cndev) 435 { 436 int i; 437 438 cndev->cn_pri = CN_DEAD; 439 440 if (mfpr(PR_MAPEN) == 0) 441 return; /* Cannot use qd if vm system is OFF */ 442 443 if (!qd0iscons) 444 return; 445 446 /* Find the console device corresponding to the console QDSS */ 447 cndev->cn_dev = makedev(cdevsw_lookup_major(&qd_cdevsw), 0); 448 cndev->cn_pri = CN_INTERNAL; 449 return; 450 } 451 452 453 /* 454 * Init QDSS as console (before probe routine) 455 */ 456 void 457 qdcninit(struct consdev *cndev) 458 { 459 void *phys_adr; /* physical QDSS base adrs */ 460 u_int mapix; /* index into QVmap[] array */ 461 int unit; 462 463 /* qdaddr must point to CSR for this unit! */ 464 465 /* The console QDSS is QDSS unit 0 */ 466 unit = 0; 467 468 /* 469 * Map q-bus memory used by qdss. (separate map) 470 */ 471 mapix = QMEMSIZE - (CHUNK * (unit + 1)); 472 #define QMEM 0x30000000 473 (int)phys_adr = QMEM + mapix; 474 pmap_map((int)(qvmem[0]), (int)phys_adr, (int)(phys_adr + (CHUNK*NQD)), 475 VM_PROT_READ|VM_PROT_WRITE); 476 477 /* 478 * Set QVmap to point to page table entries for what we just 479 * mapped. 480 */ 481 QVmap[0] = (struct pte *)kvtopte(qvmem[0]); 482 483 /* 484 * tell QDSS which Q memory address base to decode 485 * (shifted right 16 bits - its in 64K units) 486 */ 487 *qdaddr = (u_short)((int)mapix >> 16); 488 qdflags[unit].config = *(u_short *)qdaddr; 489 490 /* 491 * load qdmap struct with the virtual addresses of the QDSS elements 492 */ 493 qdbase[unit] = (void *) (qvmem[0]); 494 qdmap[unit].template = qdbase[unit] + TMPSTART; 495 qdmap[unit].adder = qdbase[unit] + ADDER; 496 qdmap[unit].dga = qdbase[unit] + DGA; 497 qdmap[unit].duart = qdbase[unit] + DUART; 498 qdmap[unit].memcsr = qdbase[unit] + MEMCSR; 499 qdmap[unit].red = qdbase[unit] + RED; 500 qdmap[unit].blue = qdbase[unit] + BLUE; 501 qdmap[unit].green = qdbase[unit] + GREEN; 502 503 qdflags[unit].duart_imask = 0; /* init shadow variables */ 504 505 /* 506 * init the QDSS 507 */ 508 509 *(short *)qdmap[unit].memcsr |= SYNC_ON; /* once only: turn on sync */ 510 511 cursor[unit].x = 0; 512 cursor[unit].y = 0; 513 init_shared(unit); /* init shared memory */ 514 setup_dragon(unit); /* init the ADDER/VIPER stuff */ 515 clear_qd_screen(unit); /* clear the screen */ 516 ldfont(unit); /* load the console font */ 517 ldcursor(unit, cons_cursor); /* load default cursor map */ 518 setup_input(unit); /* init the DUART */ 519 selinit(&qdrsel[unit]); 520 521 /* Set flag so probe knows */ 522 qd0cninited = 1; 523 } /* qdcninit */ 524 525 /* see <sys/device.h> */ 526 CFATTACH_DECL_NEW(qd, sizeof(struct qd_softc), 527 qd_match, qd_attach, NULL, NULL); 528 529 #define QD_RCSR(reg) \ 530 bus_space_read_2(sc->sc_iot, sc->sc_ioh, reg) 531 #define QD_WCSR(reg, val) \ 532 bus_space_write_2(sc->sc_iot, sc->sc_ioh, reg, val) 533 534 /* 535 * Configure QDSS into Q memory and make it intrpt. 536 * 537 * side effects: QDSS gets mapped into Qbus memory space at the first 538 * vacant 64kb boundary counting back from the top of 539 * Qbus memory space (qvmem+4mb) 540 * 541 * return: QDSS bus request level and vector address returned in 542 * registers by UNIX convention. 543 * 544 */ 545 static int 546 qd_match(device_t parent, cfdata_t match, void *aux) 547 { 548 struct qd_softc ssc; 549 struct qd_softc *sc = &ssc; 550 struct uba_attach_args *ua = aux; 551 struct uba_softc *uh = device_private(parent); 552 int unit; 553 volatile struct dga *dga; /* pointer to gate array structure */ 554 int vector; 555 #ifdef notdef 556 int *ptep; /* page table entry pointer */ 557 void *phys_adr; /* physical QDSS base adrs */ 558 u_int mapix; 559 #endif 560 561 /* Create a "fake" softc with only a few fields used. */ 562 sc->sc_iot = ua->ua_iot; 563 sc->sc_ioh = ua->ua_ioh; 564 sc->sc_dmat = ua->ua_dmat; 565 /* 566 * calculate board unit number from I/O page register address 567 */ 568 unit = (int) (((int)sc->sc_ioh >> 1) & 0x0007); 569 570 /* 571 * QDSS regs must be mapped to Qbus memory space at a 64kb 572 * physical boundary. The Qbus memory space is mapped into 573 * the system memory space at config time. After config 574 * runs, "qvmem[0]" (ubavar.h) holds the system virtual adrs 575 * of the start of Qbus memory. The Qbus memory page table 576 * is found via an array of pte ptrs called "QVmap[]" (ubavar.h) 577 * which is also loaded at config time. These are the 578 * variables used below to find a vacant 64kb boundary in 579 * Qbus memory, and load it's corresponding physical adrs 580 * into the QDSS's I/O page CSR. 581 */ 582 583 /* 584 * Only if QD is the graphics device. 585 */ 586 587 /* if this QDSS is NOT the console, then do init here.. */ 588 589 if (unit != 0) { 590 printf("qd: can't support two qdss's (yet)\n"); 591 #ifdef notdef /* can't test */ 592 if (v_consputc != qdputc || unit != 0) { 593 594 /* 595 * read QDSS config info 596 */ 597 qdflags[unit].config = *(u_short *)reg; 598 599 /* 600 * find an empty 64kb adrs boundary 601 */ 602 603 qdbase[unit] = (void *) (qvmem[0] + QMEMSIZE - CHUNK); 604 605 /* 606 * find the cpusw entry that matches this machine. 607 */ 608 cpup = &cpusw[cpu]; 609 while (!(BADADDR(qdbase[unit], sizeof(short)))) 610 qdbase[unit] -= CHUNK; 611 612 /* 613 * tell QDSS which Q memory address base to decode 614 */ 615 mapix = (int) (VTOP(qdbase[unit]) - VTOP(qvmem[0])); 616 ptep = (int *) QVmap[0] + mapix; 617 phys_adr = (void *)(((int)*ptep&0x001FFFFF)<<VAX_PGSHIFT); 618 *(u_short *)reg = (u_short) ((int)phys_adr >> 16); 619 620 /* 621 * load QDSS adrs map with system addresses 622 * of device regs 623 */ 624 qdmap[unit].template = qdbase[unit] + TMPSTART; 625 qdmap[unit].adder = qdbase[unit] + ADDER; 626 qdmap[unit].dga = qdbase[unit] + DGA; 627 qdmap[unit].duart = qdbase[unit] + DUART; 628 qdmap[unit].memcsr = qdbase[unit] + MEMCSR; 629 qdmap[unit].red = qdbase[unit] + RED; 630 qdmap[unit].blue = qdbase[unit] + BLUE; 631 qdmap[unit].green = qdbase[unit] + GREEN; 632 633 /* device init */ 634 635 cursor[unit].x = 0; 636 cursor[unit].y = 0; 637 init_shared(unit); /* init shared memory */ 638 setup_dragon(unit); /* init the ADDER/VIPER stuff */ 639 ldcursor(unit, cons_cursor); /* load default cursor map */ 640 setup_input(unit); /* init the DUART */ 641 clear_qd_screen(unit); 642 ldfont(unit); /* load the console font */ 643 644 /* once only: turn on sync */ 645 646 *(short *)qdmap[unit].memcsr |= SYNC_ON; 647 } 648 #endif /*notdef*/ 649 } else { 650 /* We are dealing with qd0 */ 651 652 if (!qd0cninited) { 653 /* 654 * qd0 has not been initiallized as the console. 655 * We need to do some initialization now 656 * 657 * XXX 658 * However, if the QDSS is not the console then 659 * that stupid undocumented bit (see qdcnprobe) 660 * is cleared. Then the QDSS refuses to work. 661 * (What did the ROM do to it!?) 662 * XXX 663 */ 664 return 0; 665 666 #if 0 667 qdaddr = (void *)reg; 668 669 /* Lame probe for QDSS. Should be ok for qd0 */ 670 if (badaddr((void *)qdaddr, sizeof(short))) 671 return 0; 672 673 qdcninit(NULL); 674 #endif 675 } 676 } 677 678 679 /* 680 * The QDSS interrupts at HEX vectors xx0 (DMA) xx4 681 * (ADDER) and xx8 (DUART). Therefore, we take three 682 * vectors from the vector pool, and then continue 683 * to take them until we get a xx0 HEX vector. The 684 * pool provides vectors in contiguous decending 685 * order. 686 */ 687 688 vector = (uh->uh_lastiv -= 4*3); /* take three vectors */ 689 690 while (vector & 0x0F) { /* if lo nibble != 0.. */ 691 /* ..take another vector */ 692 vector = (uh->uh_lastiv -= 4); 693 } 694 695 /* 696 * setup DGA to do a DMA interrupt (transfer count = 0) 697 */ 698 dga = (struct dga *) qdmap[unit].dga; 699 dga->csr = (short) HALT; /* disable everything */ 700 dga->ivr = (short) vector; /* load intrpt base vector */ 701 dga->bytcnt_lo = (short) 0; /* DMA xfer count = 0 */ 702 dga->bytcnt_hi = (short) 0; 703 704 /* 705 * turn on DMA interrupts 706 */ 707 dga->csr &= ~SET_DONE_FIFO; 708 dga->csr |= DMA_IE | DL_ENB; 709 710 DELAY(20000); /* wait for the intrpt */ 711 dga->csr = HALT; /* stop the wheels */ 712 713 /* 714 * score this as an existing qdss 715 */ 716 qdcount++; 717 718 return 1; 719 } /* qdprobe */ 720 721 722 void 723 qd_attach(device_t parent, device_t self, void *aux) 724 { 725 struct uba_attach_args *ua = aux; 726 int unit; /* QDSS module # for this call */ 727 728 printf("\n"); 729 730 unit = device_unit(self); /* get QDSS number */ 731 732 /* Set interrupt vectors for interrupt handlers */ 733 734 uba_intr_establish(ua->ua_icookie, ua->ua_cvec , qddint, self); 735 uba_intr_establish(ua->ua_icookie, ua->ua_cvec + 4, qdaint, self); 736 uba_intr_establish(ua->ua_icookie, ua->ua_cvec + 8, qdiint, self); 737 738 /* 739 * init "qdflags[]" for this QDSS 740 */ 741 qdflags[unit].inuse = 0; /* init inuse variable EARLY! */ 742 qdflags[unit].mapped = 0; 743 qdflags[unit].kernel_loop = -1; 744 qdflags[unit].user_dma = 0; 745 qdflags[unit].curs_acc = ACC_OFF; 746 qdflags[unit].curs_thr = 128; 747 qdflags[unit].tab_res = 2; /* default tablet resolution factor */ 748 qdflags[unit].duart_imask = 0; /* init shadow variables */ 749 qdflags[unit].adder_ie = 0; 750 751 /* 752 * init structures used in kbd/mouse interrupt service. This code must 753 * come after the "init_shared()" routine has run since that routine 754 * inits the eq_header[unit] structure used here. 755 */ 756 757 /* 758 * init the "latest mouse report" structure 759 */ 760 last_rep[unit].state = 0; 761 last_rep[unit].dx = 0; 762 last_rep[unit].dy = 0; 763 last_rep[unit].bytcnt = 0; 764 765 /* 766 * init the event queue (except mouse position) 767 */ 768 eq_header[unit]->header.events = 769 (struct _vs_event *)((int)eq_header[unit] + sizeof(struct qdinput)); 770 771 eq_header[unit]->header.size = MAXEVENTS; 772 eq_header[unit]->header.head = 0; 773 eq_header[unit]->header.tail = 0; 774 775 /* 776 * open exclusive for graphics device. 777 */ 778 qdopened[unit] = 0; 779 780 } /* qdattach */ 781 782 783 /*ARGSUSED*/ 784 int 785 qdopen(dev_t dev, int flag, int mode, struct proc *p) 786 { 787 volatile struct dga *dga; /* ptr to gate array struct */ 788 struct tty *tp; 789 volatile struct duart *duart; 790 struct uba_softc *sc; 791 int unit; 792 int minor_dev; 793 794 minor_dev = minor(dev); /* get QDSS minor device number */ 795 unit = minor_dev >> 2; 796 797 /* 798 * check for illegal conditions 799 */ 800 sc = device_lookup_private(&qd_cd, unit); 801 if (sc == NULL) 802 return ENXIO; 803 804 duart = (struct duart *) qdmap[unit].duart; 805 dga = (struct dga *) qdmap[unit].dga; 806 807 if ((minor_dev & 0x03) == 2) { 808 /* 809 * this is the graphic device... 810 */ 811 if (qdopened[unit] != 0) 812 return(EBUSY); 813 else 814 qdopened[unit] = 1; 815 qdflags[unit].inuse |= GRAPHIC_DEV; /* graphics dev is open */ 816 /* 817 * enble kbd & mouse intrpts in DUART mask reg 818 */ 819 qdflags[unit].duart_imask |= 0x22; 820 duart->imask = qdflags[unit].duart_imask; 821 } else { 822 /* Only one console */ 823 if (minor_dev) return ENXIO; 824 825 /* If not done already, allocate tty structure */ 826 if (qd_tty[minor_dev] == NULL) 827 qd_tty[minor_dev] = tty_alloc(); 828 829 if (qd_tty[minor_dev] == NULL) 830 return ENXIO; 831 832 /* 833 * this is the console 834 */ 835 qdflags[unit].inuse |= CONS_DEV; /* mark console as open */ 836 dga->csr |= CURS_ENB; 837 qdflags[unit].duart_imask |= 0x02; 838 duart->imask = qdflags[unit].duart_imask; 839 /* 840 * some setup for tty handling 841 */ 842 tp = qd_tty[minor_dev]; 843 /* tp->t_addr = ui->ui_addr; */ 844 tp->t_oproc = qdstart; 845 tp->t_dev = dev; 846 if ((tp->t_state & TS_ISOPEN) == 0) { 847 ttychars(tp); 848 tp->t_ispeed = B9600; 849 tp->t_ospeed = B9600; 850 tp->t_state = TS_ISOPEN | TS_CARR_ON; 851 tp->t_iflag = TTYDEF_IFLAG; 852 tp->t_oflag = TTYDEF_OFLAG; 853 tp->t_lflag = TTYDEF_LFLAG; 854 tp->t_cflag = TTYDEF_CFLAG; 855 ttsetwater(tp); 856 } 857 /* 858 * enable intrpts, open line discipline 859 */ 860 dga->csr |= GLOBAL_IE; /* turn on the interrupts */ 861 return ((*tp->t_linesw->l_open)(dev, tp)); 862 } 863 dga->csr |= GLOBAL_IE; /* turn on the interrupts */ 864 return(0); 865 866 } /* qdopen */ 867 868 /*ARGSUSED*/ 869 int 870 qdclose(dev_t dev, int flag, int mode, struct proc *p) 871 { 872 struct tty *tp; 873 struct qdmap *qd; 874 volatile int *ptep; 875 volatile struct dga *dga; /* gate array register map pointer */ 876 volatile struct duart *duart; 877 volatile struct adder *adder; 878 int unit; 879 int minor_dev; 880 u_int mapix; 881 int i; /* SIGNED index */ 882 struct uba_softc *uh; 883 884 minor_dev = minor(dev); /* get minor device number */ 885 unit = minor_dev >> 2; /* get QDSS number */ 886 qd = &qdmap[unit]; 887 888 uh = device_private(device_parent(device_lookup(&qd_cd, unit))); 889 890 891 if ((minor_dev & 0x03) == 2) { 892 /* 893 * this is the graphic device... 894 */ 895 if (qdopened[unit] != 1) 896 return(EBUSY); 897 else 898 qdopened[unit] = 0; /* allow it to be re-opened */ 899 /* 900 * re-protect device memory 901 */ 902 if (qdflags[unit].mapped & MAPDEV) { 903 /* 904 * TEMPLATE RAM 905 */ 906 mapix = VTOP((int)qd->template) - VTOP(qvmem[0]); 907 ptep = (int *)(QVmap[0] + mapix); 908 for (i = 0; i < vax_btop(TMPSIZE); i++, ptep++) 909 *ptep = (*ptep & ~PG_PROT) | PG_V | PG_KW; 910 /* 911 * ADDER 912 */ 913 mapix = VTOP((int)qd->adder) - VTOP(qvmem[0]); 914 ptep = (int *)(QVmap[0] + mapix); 915 for (i = 0; i < vax_btop(REGSIZE); i++, ptep++) 916 *ptep = (*ptep & ~PG_PROT) | PG_V | PG_KW; 917 /* 918 * COLOR MAPS 919 */ 920 mapix = VTOP((int)qd->red) - VTOP(qvmem[0]); 921 ptep = (int *)(QVmap[0] + mapix); 922 for (i = 0; i < vax_btop(CLRSIZE); i++, ptep++) 923 *ptep = (*ptep & ~PG_PROT) | PG_V | PG_KW; 924 } 925 926 /* 927 * re-protect DMA buffer and free the map registers 928 */ 929 if (qdflags[unit].mapped & MAPDMA) { 930 panic("Unmapping unmapped buffer"); 931 #ifdef notyet 932 /* 933 * Ragge 990620: 934 * Can't happen because the buffer can't be mapped. 935 */ 936 dga = (struct dga *) qdmap[unit].dga; 937 adder = (struct adder *) qdmap[unit].adder; 938 dga->csr &= ~DMA_IE; 939 dga->csr &= ~0x0600; /* kill DMA */ 940 adder->command = CANCEL; 941 /* 942 * if DMA was running, flush spurious intrpt 943 */ 944 if (dga->bytcnt_lo != 0) { 945 dga->bytcnt_lo = 0; 946 dga->bytcnt_hi = 0; 947 DMA_SETIGNORE(DMAheader[unit]); 948 dga->csr |= DMA_IE; 949 dga->csr &= ~DMA_IE; 950 } 951 ptep = (int *) 952 ((VTOP(DMAheader[unit]*4)) + (mfpr(PR_SBR)|0x80000000)); 953 for (i = 0; i < vax_btop(DMAbuf_size); i++, ptep++) 954 *ptep = (*ptep & ~PG_PROT) | PG_V | PG_KW; 955 ubarelse(uh, &Qbus_unmap[unit]); 956 #endif 957 } 958 959 /* 960 * re-protect 1K (2 pages) event queue 961 */ 962 if (qdflags[unit].mapped & MAPEQ) { 963 ptep = (int *) 964 ((VTOP(eq_header[unit])*4) + (mfpr(PR_SBR)|0x80000000)); 965 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; ptep++; 966 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; 967 } 968 /* 969 * re-protect scroll param area and disable scroll intrpts 970 */ 971 if (qdflags[unit].mapped & MAPSCR) { 972 ptep = (int *) ((VTOP(scroll[unit]) * 4) 973 + (mfpr(PR_SBR) | 0x80000000)); 974 /* 975 * re-protect 512 scroll param area 976 */ 977 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; 978 adder = (struct adder *) qdmap[unit].adder; 979 qdflags[unit].adder_ie &= ~FRAME_SYNC; 980 adder->interrupt_enable = qdflags[unit].adder_ie; 981 } 982 /* 983 * re-protect color map write buffer area and kill intrpts 984 */ 985 if (qdflags[unit].mapped & MAPCOLOR) { 986 ptep = (int *) ((VTOP(color_buf[unit]) * 4) 987 + (mfpr(PR_SBR) | 0x80000000)); 988 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; ptep++; 989 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; 990 color_buf[unit]->status = 0; 991 adder = (struct adder *) qdmap[unit].adder; 992 qdflags[unit].adder_ie &= ~VSYNC; 993 adder->interrupt_enable = qdflags[unit].adder_ie; 994 } 995 mtpr(0, PR_TBIA); 996 /* flag everything now unmapped */ 997 qdflags[unit].mapped = 0; 998 qdflags[unit].inuse &= ~GRAPHIC_DEV; 999 qdflags[unit].curs_acc = ACC_OFF; 1000 qdflags[unit].curs_thr = 128; 1001 /* 1002 * restore the console 1003 */ 1004 dga = (struct dga *) qdmap[unit].dga; 1005 adder = (struct adder *) qdmap[unit].adder; 1006 dga->csr &= ~DMA_IE; 1007 dga->csr &= ~0x0600; /* halt the DMA! (just in case...) */ 1008 dga->csr |= DMA_ERR; /* clear error condition */ 1009 adder->command = CANCEL; 1010 /* 1011 * if DMA was running, flush spurious intrpt 1012 */ 1013 if (dga->bytcnt_lo != 0) { 1014 dga->bytcnt_lo = 0; 1015 dga->bytcnt_hi = 0; 1016 DMA_SETIGNORE(DMAheader[unit]); 1017 dga->csr |= DMA_IE; 1018 dga->csr &= ~DMA_IE; 1019 } 1020 init_shared(unit); /* init shared memory */ 1021 setup_dragon(unit); /* init ADDER/VIPER */ 1022 ldcursor(unit, cons_cursor); /* load default cursor map */ 1023 setup_input(unit); /* init the DUART */ 1024 ldfont(unit); 1025 cursor[unit].x = 0; 1026 cursor[unit].y = 0; 1027 /* 1028 * shut off the mouse rcv intrpt and turn on kbd intrpts 1029 */ 1030 duart = (struct duart *) qdmap[unit].duart; 1031 qdflags[unit].duart_imask &= ~(0x20); 1032 qdflags[unit].duart_imask |= 0x02; 1033 duart->imask = qdflags[unit].duart_imask; 1034 /* 1035 * shut off interrupts if all is closed 1036 */ 1037 if (!(qdflags[unit].inuse & CONS_DEV)) { 1038 dga = (struct dga *) qdmap[unit].dga; 1039 dga->csr &= ~(GLOBAL_IE | DMA_IE); 1040 } 1041 } else { 1042 /* 1043 * this is the console 1044 */ 1045 tp = qd_tty[minor_dev]; 1046 (*tp->t_linesw->l_close)(tp, flag); 1047 ttyclose(tp); 1048 tp->t_state = 0; 1049 qdflags[unit].inuse &= ~CONS_DEV; 1050 /* 1051 * if graphics device is closed, kill interrupts 1052 */ 1053 if (!(qdflags[unit].inuse & GRAPHIC_DEV)) { 1054 dga = (struct dga *) qdmap[unit].dga; 1055 dga->csr &= ~(GLOBAL_IE | DMA_IE); 1056 } 1057 } 1058 1059 return(0); 1060 1061 } /* qdclose */ 1062 1063 int 1064 qdioctl(dev_t dev, u_long cmd, void *datap, int flags, struct proc *p) 1065 { 1066 volatile int *ptep; /* page table entry pointer */ 1067 int mapix; /* QVmap[] page table index */ 1068 struct _vs_event *event; 1069 struct tty *tp; 1070 int i; 1071 struct qdmap *qd; /* pointer to device map struct */ 1072 volatile struct dga *dga; /* Gate Array reg structure pntr */ 1073 volatile struct duart *duart; /* DUART reg structure pointer */ 1074 volatile struct adder *adder; /* ADDER reg structure pointer */ 1075 struct prgkbd *cmdbuf; 1076 struct prg_cursor *curs; 1077 struct _vs_cursor *pos; 1078 int unit = minor(dev) >> 2; /* number of caller's QDSS */ 1079 u_int minor_dev = minor(dev); 1080 int error; 1081 int s; 1082 short *temp; /* a pointer to template RAM */ 1083 struct uba_softc *uh; 1084 1085 uh = device_private(device_parent(device_lookup(&qd_cd, unit))); 1086 1087 /* 1088 * service graphic device ioctl commands 1089 */ 1090 switch (cmd) { 1091 1092 case QD_GETEVENT: 1093 /* 1094 * extract the oldest event from the event queue 1095 */ 1096 if (ISEMPTY(eq_header[unit])) { 1097 event = (struct _vs_event *) datap; 1098 event->vse_device = VSE_NULL; 1099 break; 1100 } 1101 event = (struct _vs_event *) GETBEGIN(eq_header[unit]); 1102 s = spl5(); 1103 GETEND(eq_header[unit]); 1104 splx(s); 1105 memcpy(datap, (void *)event, sizeof(struct _vs_event)); 1106 break; 1107 1108 case QD_RESET: 1109 /* 1110 * init the dragon stuff, DUART, and driver variables 1111 */ 1112 init_shared(unit); /* init shared memory */ 1113 setup_dragon(unit); /* init the ADDER/VIPER stuff */ 1114 clear_qd_screen(unit); 1115 ldcursor(unit, cons_cursor); /* load default cursor map */ 1116 ldfont(unit); /* load the console font */ 1117 setup_input(unit); /* init the DUART */ 1118 break; 1119 1120 case QD_SET: 1121 /* 1122 * init the DUART and driver variables 1123 */ 1124 init_shared(unit); 1125 setup_input(unit); 1126 break; 1127 1128 case QD_CLRSCRN: 1129 /* 1130 * clear the QDSS screen. (NOTE that this reinits the dragon) 1131 */ 1132 #ifdef notdef /* has caused problems and isn't necessary */ 1133 setup_dragon(unit); 1134 clear_qd_screen(unit); 1135 #endif 1136 break; 1137 1138 case QD_WTCURSOR: 1139 /* 1140 * load a cursor into template RAM 1141 */ 1142 ldcursor(unit, (short *)datap); 1143 break; 1144 1145 case QD_RDCURSOR: 1146 1147 temp = (short *) qdmap[unit].template; 1148 /* 1149 * cursor is 32 WORDS from the end of the 8k WORD... 1150 * ...template space 1151 */ 1152 temp += (8 * 1024) - 32; 1153 for (i = 0; i < 32; ++i, datap += sizeof(short)) 1154 *(short *)datap = *temp++; 1155 break; 1156 1157 case QD_POSCURSOR: 1158 /* 1159 * position the mouse cursor 1160 */ 1161 dga = (struct dga *) qdmap[unit].dga; 1162 pos = (struct _vs_cursor *) datap; 1163 s = spl5(); 1164 dga->x_cursor = TRANX(pos->x); 1165 dga->y_cursor = TRANY(pos->y); 1166 eq_header[unit]->curs_pos.x = pos->x; 1167 eq_header[unit]->curs_pos.y = pos->y; 1168 splx(s); 1169 break; 1170 1171 case QD_PRGCURSOR: 1172 /* 1173 * set the cursor acceleration factor 1174 */ 1175 curs = (struct prg_cursor *) datap; 1176 s = spl5(); 1177 qdflags[unit].curs_acc = curs->acc_factor; 1178 qdflags[unit].curs_thr = curs->threshold; 1179 splx(s); 1180 break; 1181 1182 case QD_MAPDEVICE: 1183 /* 1184 * enable 'user write' to device pages 1185 */ 1186 qdflags[unit].mapped |= MAPDEV; 1187 qd = (struct qdmap *) &qdmap[unit]; 1188 /* 1189 * enable user write to template RAM 1190 */ 1191 mapix = VTOP((int)qd->template) - VTOP(qvmem[0]); 1192 ptep = (int *)(QVmap[0] + mapix); 1193 for (i = 0; i < vax_btop(TMPSIZE); i++, ptep++) 1194 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1195 1196 /* 1197 * enable user write to registers 1198 */ 1199 mapix = VTOP((int)qd->adder) - VTOP(qvmem[0]); 1200 ptep = (int *)(QVmap[0] + mapix); 1201 for (i = 0; i < vax_btop(REGSIZE); i++, ptep++) 1202 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1203 1204 /* 1205 * enable user write to color maps 1206 */ 1207 mapix = VTOP((int)qd->red) - VTOP(qvmem[0]); 1208 ptep = (int *)(QVmap[0] + mapix); 1209 for (i = 0; i < vax_btop(CLRSIZE); i++, ptep++) 1210 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1211 1212 /* 1213 * enable user write to DUART 1214 */ 1215 mapix = VTOP((int)qd->duart) - VTOP(qvmem[0]); 1216 ptep = (int *)(QVmap[0] + mapix); 1217 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; /* duart page */ 1218 1219 mtpr(0, PR_TBIA); /* invalidate translation buffer */ 1220 1221 /* 1222 * stuff qdmap structure in return buffer 1223 */ 1224 memcpy(datap, (void *)qd, sizeof(struct qdmap)); 1225 1226 break; 1227 1228 #ifdef notyet 1229 /* 1230 * Ragge 999620: 1231 * Can't map in the graphic buffer into user space for now. 1232 * The best way to fix this is to convert this driver to wscons. 1233 */ 1234 case QD_MAPIOBUF: 1235 /* 1236 * do setup for DMA by user process 1237 * 1238 * set 'user write enable' bits for DMA buffer 1239 */ 1240 qdflags[unit].mapped |= MAPDMA; 1241 ptep = (int *) ((VTOP(DMAheader[unit]) * 4) 1242 + (mfpr(PR_SBR) | 0x80000000)); 1243 for (i = 0; i < vax_btop(DMAbuf_size); i++, ptep++) 1244 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1245 mtpr(0, PR_TBIA); /* invalidate translation buffer */ 1246 /* 1247 * set up QBUS map registers for DMA 1248 */ 1249 DMAheader[unit]->QBAreg = 1250 uballoc(uh, (void *)DMAheader[unit], DMAbuf_size, 0); 1251 if (DMAheader[unit]->QBAreg == 0) 1252 printf("qd%d: qdioctl: QBA setup error\n", unit); 1253 Qbus_unmap[unit] = DMAheader[unit]->QBAreg; 1254 DMAheader[unit]->QBAreg &= 0x3FFFF; 1255 /* 1256 * return I/O buf adr 1257 */ 1258 *(int *)datap = (int) DMAheader[unit]; 1259 break; 1260 #endif 1261 1262 case QD_MAPSCROLL: 1263 /* 1264 * map the shared scroll param area and enable scroll interpts 1265 */ 1266 qdflags[unit].mapped |= MAPSCR; 1267 ptep = (int *) ((VTOP(scroll[unit]) * 4) 1268 + (mfpr(PR_SBR) | 0x80000000)); 1269 /* 1270 * allow user write to scroll area 1271 */ 1272 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1273 mtpr(0, PR_TBIA); /* invalidate translation buf */ 1274 scroll[unit]->status = 0; 1275 adder = (struct adder *) qdmap[unit].adder; 1276 qdflags[unit].adder_ie |= FRAME_SYNC; 1277 adder->interrupt_enable = qdflags[unit].adder_ie; 1278 *(int *)datap = (int) scroll[unit]; /* return scroll area */ 1279 break; 1280 1281 case QD_UNMAPSCROLL: 1282 /* 1283 * unmap shared scroll param area and disable scroll intrpts 1284 */ 1285 if (qdflags[unit].mapped & MAPSCR) { 1286 qdflags[unit].mapped &= ~MAPSCR; 1287 ptep = (int *) ((VTOP(scroll[unit]) * 4) 1288 + (mfpr(PR_SBR) | 0x80000000)); 1289 /* 1290 * re-protect 512 scroll param area 1291 */ 1292 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; 1293 mtpr(0, PR_TBIA); /* smash CPU's translation buf */ 1294 adder = (struct adder *) qdmap[unit].adder; 1295 qdflags[unit].adder_ie &= ~FRAME_SYNC; 1296 adder->interrupt_enable = qdflags[unit].adder_ie; 1297 } 1298 break; 1299 1300 case QD_MAPCOLOR: 1301 /* 1302 * map shared color map write buf and turn on vsync intrpt 1303 */ 1304 qdflags[unit].mapped |= MAPCOLOR; 1305 ptep = (int *) ((VTOP(color_buf[unit]) * 4) 1306 + (mfpr(PR_SBR) | 0x80000000)); 1307 /* 1308 * allow user write to color map write buffer 1309 */ 1310 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; ptep++; 1311 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1312 mtpr(0, PR_TBIA); /* clr CPU translation buf */ 1313 adder = (struct adder *) qdmap[unit].adder; 1314 qdflags[unit].adder_ie |= VSYNC; 1315 adder->interrupt_enable = qdflags[unit].adder_ie; 1316 /* 1317 * return color area address 1318 */ 1319 *(int *)datap = (int) color_buf[unit]; 1320 break; 1321 1322 case QD_UNMAPCOLOR: 1323 /* 1324 * unmap shared color map write buffer and kill VSYNC intrpts 1325 */ 1326 if (qdflags[unit].mapped & MAPCOLOR) { 1327 qdflags[unit].mapped &= ~MAPCOLOR; 1328 ptep = (int *) ((VTOP(color_buf[unit]) * 4) 1329 + (mfpr(PR_SBR) | 0x80000000)); 1330 /* 1331 * re-protect color map write buffer 1332 */ 1333 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; ptep++; 1334 *ptep = (*ptep & ~PG_PROT) | PG_KW | PG_V; 1335 mtpr(0, PR_TBIA); 1336 adder = (struct adder *) qdmap[unit].adder; 1337 qdflags[unit].adder_ie &= ~VSYNC; 1338 adder->interrupt_enable = qdflags[unit].adder_ie; 1339 } 1340 break; 1341 1342 case QD_MAPEVENT: 1343 /* 1344 * give user write access to the event queue 1345 */ 1346 qdflags[unit].mapped |= MAPEQ; 1347 ptep = (int *) ((VTOP(eq_header[unit]) * 4) 1348 + (mfpr(PR_SBR) | 0x80000000)); 1349 /* 1350 * allow user write to 1K event queue 1351 */ 1352 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; ptep++; 1353 *ptep = (*ptep & ~PG_PROT) | PG_RW | PG_V; 1354 mtpr(0, PR_TBIA); /* clr CPU translation buf */ 1355 /* 1356 * return event queue address 1357 */ 1358 *(int *)datap = (int)eq_header[unit]; 1359 break; 1360 1361 case QD_PRGKBD: 1362 /* 1363 * pass caller's programming commands to LK201 1364 */ 1365 duart = (struct duart *)qdmap[unit].duart; 1366 cmdbuf = (struct prgkbd *)datap; /* pnt to kbd cmd buf */ 1367 /* 1368 * send command 1369 */ 1370 for (i = 1000; i > 0; --i) { 1371 if (duart->statusA&XMT_RDY) { 1372 duart->dataA = cmdbuf->cmd; 1373 break; 1374 } 1375 } 1376 if (i == 0) { 1377 printf("qd%d: qdioctl: timeout on XMT_RDY [1]\n", unit); 1378 break; 1379 } 1380 /* 1381 * send param1? 1382 */ 1383 if (cmdbuf->cmd & LAST_PARAM) 1384 break; 1385 for (i = 1000; i > 0; --i) { 1386 if (duart->statusA&XMT_RDY) { 1387 duart->dataA = cmdbuf->param1; 1388 break; 1389 } 1390 } 1391 if (i == 0) { 1392 printf("qd%d: qdioctl: timeout on XMT_RDY [2]\n", unit); 1393 break; 1394 } 1395 /* 1396 * send param2? 1397 */ 1398 if (cmdbuf->param1 & LAST_PARAM) 1399 break; 1400 for (i = 1000; i > 0; --i) { 1401 if (duart->statusA&XMT_RDY) { 1402 duart->dataA = cmdbuf->param2; 1403 break; 1404 } 1405 } 1406 if (i == 0) { 1407 printf("qd%d: qdioctl: timeout on XMT_RDY [3]\n", unit); 1408 break; 1409 } 1410 break; 1411 1412 case QD_PRGMOUSE: 1413 /* 1414 * pass caller's programming commands to the mouse 1415 */ 1416 duart = (struct duart *) qdmap[unit].duart; 1417 for (i = 1000; i > 0; --i) { 1418 if (duart->statusB&XMT_RDY) { 1419 duart->dataB = *datap; 1420 break; 1421 } 1422 } 1423 if (i == 0) { 1424 printf("qd%d: qdioctl: timeout on XMT_RDY [4]\n", unit); 1425 } 1426 break; 1427 1428 case QD_RDCONFIG: 1429 /* 1430 * get QDSS configuration word and return it 1431 */ 1432 *(short *)datap = qdflags[unit].config; 1433 break; 1434 1435 case QD_KERN_LOOP: 1436 case QD_KERN_UNLOOP: 1437 /* 1438 * vestige from ultrix. BSD uses TIOCCONS to redirect 1439 * kernel console output. 1440 */ 1441 break; 1442 1443 case QD_PRGTABLET: 1444 /* 1445 * program the tablet 1446 */ 1447 duart = (struct duart *) qdmap[unit].duart; 1448 for (i = 1000; i > 0; --i) { 1449 if (duart->statusB&XMT_RDY) { 1450 duart->dataB = *datap; 1451 break; 1452 } 1453 } 1454 if (i == 0) { 1455 printf("qd%d: qdioctl: timeout on XMT_RDY [5]\n", unit); 1456 } 1457 break; 1458 1459 case QD_PRGTABRES: 1460 /* 1461 * program the tablet report resolution factor 1462 */ 1463 qdflags[unit].tab_res = *(short *)datap; 1464 break; 1465 1466 default: 1467 /* 1468 * service tty ioctl's 1469 */ 1470 if (!(minor_dev & 0x02)) { 1471 tp = qd_tty[minor_dev]; 1472 error = 1473 1474 (*tp->t_linesw->l_ioctl)(tp, cmd, datap, flags, p); 1475 if (error != EPASSTHROUGH) { 1476 return(error); 1477 } 1478 return ttioctl(tp, cmd, datap, flags, p); 1479 } 1480 break; 1481 } 1482 1483 return(0); 1484 1485 } /* qdioctl */ 1486 1487 1488 int 1489 qdpoll(dev_t dev, int events, struct proc *p) 1490 { 1491 int s; 1492 int unit; 1493 struct tty *tp; 1494 u_int minor_dev = minor(dev); 1495 int revents = 0; 1496 1497 s = spl5(); 1498 unit = minor_dev >> 2; 1499 1500 if ((minor_dev & 0x03) == 2) { 1501 /* 1502 * This is a graphics device, so check for events. 1503 */ 1504 1505 if (events & (POLLIN | POLLRDNORM)) 1506 if(!(ISEMPTY(eq_header[unit]))) 1507 revents |= events & (POLLIN | POLLRDNORM); 1508 1509 if (events & (POLLOUT | POLLWRNORM)) 1510 if (DMA_ISEMPTY(DMAheader[unit])) 1511 revents |= events & (POLLOUT | POLLWRNORM); 1512 1513 if (revents == 0) { 1514 if (events & (POLLIN | POLLRDNORM)) 1515 selrecord(p, &qdrsel[unit]); 1516 1517 if (events & (POLLOUT | POLLWRNORM)) 1518 selrecord(p, &qdrsel[unit]); 1519 } 1520 } else { 1521 /* 1522 * this is a tty device 1523 */ 1524 tp = qd_tty[minor_dev]; 1525 revents = (*tp->t_linesw->l_poll)(tp, events, p); 1526 } 1527 1528 splx(s); 1529 return (revents); 1530 } /* qdpoll() */ 1531 1532 static void 1533 filt_qdrdetach(struct knote *kn) 1534 { 1535 dev_t dev = (intptr_t) kn->kn_hook; 1536 u_int minor_dev = minor(dev); 1537 int unit = minor_dev >> 2; 1538 int s; 1539 1540 s = spl5(); 1541 SLIST_REMOVE(&qdrsel[unit].sel_klist, kn, knote, kn_selnext); 1542 splx(s); 1543 } 1544 1545 static int 1546 filt_qdread(struct knote *kn, long hint) 1547 { 1548 dev_t dev = (intptr_t) kn->kn_hook; 1549 u_int minor_dev = minor(dev); 1550 int unit = minor_dev >> 2; 1551 1552 if (ISEMPTY(eq_header[unit])) 1553 return (0); 1554 1555 kn->kn_data = 0; /* XXXLUKEM (thorpej): what to put here? */ 1556 return (1); 1557 } 1558 1559 static int 1560 filt_qdwrite(struct knote *kn, long hint) 1561 { 1562 dev_t dev = (intptr_t) kn->kn_hook; 1563 u_int minor_dev = minor(dev); 1564 int unit = minor_dev >> 2; 1565 1566 if (! DMA_ISEMPTY(DMAheader[unit])) 1567 return (0); 1568 1569 kn->kn_data = 0; /* XXXLUKEM (thorpej): what to put here? */ 1570 return (1); 1571 } 1572 1573 static const struct filterops qdread_filtops = 1574 { 1, NULL, filt_qdrdetach, filt_qdread }; 1575 1576 static const struct filterops qdwrite_filtops = 1577 { 1, NULL, filt_qdrdetach, filt_qdwrite }; 1578 1579 int 1580 qdkqfilter(dev_t dev, struct knote *kn) 1581 { 1582 struct klist *klist; 1583 u_int minor_dev = minor(dev); 1584 int s, unit = minor_dev >> 2; 1585 1586 if ((minor_dev & 0x03) != 2) { 1587 /* TTY device. */ 1588 return (ttykqfilter(dev, kn)); 1589 } 1590 1591 switch (kn->kn_filter) { 1592 case EVFILT_READ: 1593 klist = &qdrsel[unit].sel_klist; 1594 kn->kn_fop = &qdread_filtops; 1595 break; 1596 1597 case EVFILT_WRITE: 1598 klist = &qdrsel[unit].sel_klist; 1599 kn->kn_fop = &qdwrite_filtops; 1600 break; 1601 1602 default: 1603 return (EINVAL); 1604 } 1605 1606 kn->kn_hook = (void *)(intptr_t) dev; 1607 1608 s = spl5(); 1609 SLIST_INSERT_HEAD(klist, kn, kn_selnext); 1610 splx(s); 1611 1612 return (0); 1613 } 1614 1615 void qd_strategy(struct buf *bp); 1616 1617 /*ARGSUSED*/ 1618 int 1619 qdwrite(dev_t dev, struct uio *uio, int flag) 1620 { 1621 struct tty *tp; 1622 int minor_dev; 1623 int unit; 1624 1625 minor_dev = minor(dev); 1626 unit = (minor_dev >> 2) & 0x07; 1627 1628 if (((minor_dev&0x03) != 0x02) && (qdflags[unit].inuse&CONS_DEV)) { 1629 /* 1630 * this is the console... 1631 */ 1632 tp = qd_tty[minor_dev]; 1633 return ((*tp->t_linesw->l_write)(tp, uio, flag)); 1634 } else if (qdflags[unit].inuse & GRAPHIC_DEV) { 1635 /* 1636 * this is a DMA xfer from user space 1637 */ 1638 return (physio(qd_strategy, NULL, dev, B_WRITE, minphys, uio)); 1639 } 1640 return (ENXIO); 1641 } 1642 1643 /*ARGSUSED*/ 1644 int 1645 qdread(dev_t dev, struct uio *uio, int flag) 1646 { 1647 struct tty *tp; 1648 int minor_dev; 1649 int unit; 1650 1651 minor_dev = minor(dev); 1652 unit = (minor_dev >> 2) & 0x07; 1653 1654 if ((minor_dev & 0x03) != 0x02 && qdflags[unit].inuse & CONS_DEV) { 1655 /* 1656 * this is the console 1657 */ 1658 tp = qd_tty[minor_dev]; 1659 return ((*tp->t_linesw->l_read)(tp, uio, flag)); 1660 } else if (qdflags[unit].inuse & GRAPHIC_DEV) { 1661 /* 1662 * this is a bitmap-to-processor xfer 1663 */ 1664 return (physio(qd_strategy, NULL, dev, B_READ, minphys, uio)); 1665 } 1666 return (ENXIO); 1667 } 1668 1669 /*************************************************************** 1670 * 1671 * qd_strategy()... strategy routine to do DMA 1672 * 1673 ***************************************************************/ 1674 1675 void 1676 qd_strategy(struct buf *bp) 1677 { 1678 volatile struct dga *dga; 1679 volatile struct adder *adder; 1680 int unit; 1681 int QBAreg; 1682 int s; 1683 int cookie; 1684 struct uba_softc *uh; 1685 1686 unit = (minor(bp->b_dev) >> 2) & 0x07; 1687 1688 uh = device_private(device_parent(device_lookup(&qd_cd, unit))); 1689 1690 /* 1691 * init pointers 1692 */ 1693 dga = (struct dga *) qdmap[unit].dga; 1694 panic("qd_strategy"); 1695 #ifdef notyet 1696 if ((QBAreg = ubasetup(uh, bp, 0)) == 0) { 1697 printf("qd%d: qd_strategy: QBA setup error\n", unit); 1698 goto STRAT_ERR; 1699 } 1700 #endif 1701 s = spl5(); 1702 qdflags[unit].user_dma = -1; 1703 dga->csr |= DMA_IE; 1704 cookie = QBAreg & 0x3FFFF; 1705 dga->adrs_lo = (short) cookie; 1706 dga->adrs_hi = (short) (cookie >> 16); 1707 dga->bytcnt_lo = (short) bp->b_bcount; 1708 dga->bytcnt_hi = (short) (bp->b_bcount >> 16); 1709 1710 while (qdflags[unit].user_dma) { 1711 (void) tsleep(&qdflags[unit].user_dma, QSPRIOR, 1712 "qdstrat", 0); 1713 } 1714 splx(s); 1715 #ifdef notyet 1716 ubarelse(uh, &QBAreg); 1717 #endif 1718 if (!(dga->csr & DMA_ERR)) { 1719 biodone(bp); 1720 return; 1721 } 1722 1723 /* STRAT_ERR: */ 1724 adder = (struct adder *) qdmap[unit].adder; 1725 adder->command = CANCEL; /* cancel adder activity */ 1726 dga->csr &= ~DMA_IE; 1727 dga->csr &= ~0x0600; /* halt DMA (reset fifo) */ 1728 dga->csr |= DMA_ERR; /* clear error condition */ 1729 bp->b_error = EIO; /* flag an error to physio() */ 1730 1731 /* 1732 * if DMA was running, flush spurious intrpt 1733 */ 1734 if (dga->bytcnt_lo != 0) { 1735 dga->bytcnt_lo = 0; 1736 dga->bytcnt_hi = 0; 1737 DMA_SETIGNORE(DMAheader[unit]); 1738 dga->csr |= DMA_IE; 1739 } 1740 biodone(bp); 1741 } /* qd_strategy */ 1742 1743 1744 /* 1745 * Start output to the console screen 1746 */ 1747 void qdstart(tp) 1748 struct tty *tp; 1749 { 1750 int which_unit, unit, c; 1751 int s; 1752 1753 unit = minor(tp->t_dev); 1754 which_unit = (unit >> 2) & 0x3; 1755 unit &= 0x03; 1756 1757 s = spl5(); 1758 1759 /* 1760 * If it's currently active, or delaying, no need to do anything. 1761 */ 1762 if (tp->t_state & (TS_TIMEOUT|TS_BUSY|TS_TTSTOP)) 1763 goto out; 1764 1765 /* 1766 * Display chars until the queue is empty. 1767 * Drop input from anything but the console 1768 * device on the floor. 1769 * 1770 * XXX - this loop is done at spltty. 1771 * 1772 */ 1773 while (tp->t_outq.c_cc) { 1774 c = getc(&tp->t_outq); 1775 if (unit == 0) 1776 blitc(which_unit, (u_char)c); 1777 } 1778 ttypull(tp); 1779 tp->t_state &= ~TS_BUSY; 1780 1781 out: 1782 splx(s); 1783 1784 } /* qdstart */ 1785 1786 /*ARGSUSED*/ 1787 void 1788 qdstop(struct tty *tp, int flag) 1789 { 1790 int s; 1791 1792 s = spl5(); /* block intrpts during state modification */ 1793 if (tp->t_state & TS_BUSY) { 1794 if ((tp->t_state & TS_TTSTOP) == 0) 1795 tp->t_state |= TS_FLUSH; 1796 else 1797 tp->t_state &= ~TS_BUSY; 1798 } 1799 splx(s); 1800 } 1801 1802 /* 1803 * Output a character to the QDSS screen 1804 */ 1805 void 1806 blitc(int unit, u_char chr) 1807 { 1808 volatile struct adder *adder; 1809 volatile struct dga *dga; 1810 int i; 1811 int nograph = !(qdflags[unit].inuse&GRAPHIC_DEV); 1812 static short inescape[NQD]; 1813 1814 adder = (struct adder *)qdmap[unit].adder; 1815 dga = (struct dga *) qdmap[unit].dga; 1816 /* 1817 * BSD comment: this (&=0177) defeats the extended character 1818 * set code for the glass tty, but if i had the time i would 1819 * spend it ripping out the code completely. This driver 1820 * is too big for its own good. 1821 */ 1822 chr &= 0177; 1823 /* 1824 * Cursor addressing (so vi will work). 1825 * Decode for "\E=%.%." cursor motion description. 1826 * Corresponds to type "qdcons" in /etc/termcap: 1827 * 1828 * qd|qdss|qdcons|qdss glass tty (4.4 BSD):\ 1829 * :am:do=^J:le=^H:bs:cm=\E=%.%.:cl=1^Z:co#128:li#57::nd=^L:up=^K: 1830 * 1831 */ 1832 if (inescape[unit] && nograph) { 1833 switch (inescape[unit]++) { 1834 case 1: 1835 if (chr != '=') { 1836 /* abort escape sequence */ 1837 inescape[unit] = 0; 1838 blitc(unit, chr); 1839 } 1840 return; 1841 case 2: 1842 /* position row */ 1843 cursor[unit].y = CHAR_HEIGHT * chr; 1844 if (cursor[unit].y > 863 - CHAR_HEIGHT) 1845 cursor[unit].y = 863 - CHAR_HEIGHT; 1846 dga->y_cursor = TRANY(cursor[unit].y); 1847 return; 1848 case 3: 1849 /* position column */ 1850 cursor[unit].x = CHAR_WIDTH * chr; 1851 if (cursor[unit].x > 1024 - CHAR_WIDTH) 1852 cursor[unit].x = 1023 - CHAR_WIDTH; 1853 dga->x_cursor = TRANX(cursor[unit].x); 1854 inescape[unit] = 0; 1855 return; 1856 default: 1857 inescape[unit] = 0; 1858 blitc(unit, chr); 1859 } 1860 } 1861 1862 switch (chr) { 1863 case '\r': /* return char */ 1864 cursor[unit].x = 0; 1865 if (nograph) 1866 dga->x_cursor = TRANX(cursor[unit].x); 1867 return; 1868 1869 case '\t': /* tab char */ 1870 for (i = 8 - ((cursor[unit].x >> 3) & 0x07); i > 0; --i) { 1871 blitc(unit, ' '); 1872 } 1873 return; 1874 1875 case '\n': /* line feed char */ 1876 if ((cursor[unit].y += CHAR_HEIGHT) > (863 - CHAR_HEIGHT)) { 1877 if (nograph) { 1878 cursor[unit].y -= CHAR_HEIGHT; 1879 scroll_up(adder); 1880 } else 1881 cursor[unit].y = 0; 1882 } 1883 if (nograph) 1884 dga->y_cursor = TRANY(cursor[unit].y); 1885 return; 1886 1887 case '\b': /* backspace char */ 1888 if (cursor[unit].x > 0) { 1889 cursor[unit].x -= CHAR_WIDTH; 1890 if (nograph) 1891 dga->x_cursor = TRANX(cursor[unit].x); 1892 } 1893 return; 1894 case CTRL('k'): /* cursor up */ 1895 if (nograph && cursor[unit].y > 0) { 1896 cursor[unit].y -= CHAR_HEIGHT; 1897 dga->y_cursor = TRANY(cursor[unit].y); 1898 } 1899 return; 1900 1901 case CTRL('^'): /* home cursor */ 1902 if (nograph) { 1903 cursor[unit].x = 0; 1904 dga->x_cursor = TRANX(cursor[unit].x); 1905 cursor[unit].y = 0; 1906 dga->y_cursor = TRANY(cursor[unit].y); 1907 } 1908 return; 1909 1910 case CTRL('l'): /* cursor right */ 1911 if (nograph && cursor[unit].x < 1023 - CHAR_WIDTH) { 1912 cursor[unit].x += CHAR_WIDTH; 1913 dga->x_cursor = TRANX(cursor[unit].x); 1914 } 1915 return; 1916 1917 case CTRL('z'): /* clear screen */ 1918 if (nograph) { 1919 setup_dragon(unit); 1920 clear_qd_screen(unit); 1921 /* home cursor - termcap seems to assume this */ 1922 cursor[unit].x = 0; 1923 dga->x_cursor = TRANX(cursor[unit].x); 1924 cursor[unit].y = 0; 1925 dga->y_cursor = TRANY(cursor[unit].y); 1926 } 1927 return; 1928 1929 case '\033': /* start escape sequence */ 1930 if (nograph) 1931 inescape[unit] = 1; 1932 return; 1933 1934 default: 1935 if ((chr < ' ') || (chr > '~')) 1936 return; 1937 } 1938 /* 1939 * setup VIPER operand control registers 1940 */ 1941 write_ID(adder, CS_UPDATE_MASK, 0x0001); /* select plane #0 */ 1942 write_ID(adder, SRC1_OCR_B, 1943 EXT_NONE | INT_SOURCE | ID | BAR_SHIFT_DELAY); 1944 write_ID(adder, CS_UPDATE_MASK, 0x00FE); /* select other planes */ 1945 write_ID(adder, SRC1_OCR_B, 1946 EXT_SOURCE | INT_NONE | NO_ID | BAR_SHIFT_DELAY); 1947 write_ID(adder, CS_UPDATE_MASK, 0x00FF); /* select all planes */ 1948 write_ID(adder, DST_OCR_B, 1949 EXT_NONE | INT_NONE | NO_ID | NO_BAR_SHIFT_DELAY); 1950 write_ID(adder, MASK_1, 0xFFFF); 1951 write_ID(adder, VIPER_Z_LOAD | FOREGROUND_COLOR_Z, 1); 1952 write_ID(adder, VIPER_Z_LOAD | BACKGROUND_COLOR_Z, 0); 1953 adder->x_clip_min = 0; 1954 adder->x_clip_max = 1024; 1955 adder->y_clip_min = 0; 1956 adder->y_clip_max = 864; 1957 /* 1958 * load DESTINATION origin and vectors 1959 */ 1960 adder->fast_dest_dy = 0; 1961 adder->slow_dest_dx = 0; 1962 adder->error_1 = 0; 1963 adder->error_2 = 0; 1964 adder->rasterop_mode = DST_WRITE_ENABLE | NORMAL; 1965 (void)wait_status(adder, RASTEROP_COMPLETE); 1966 adder->destination_x = cursor[unit].x; 1967 adder->fast_dest_dx = CHAR_WIDTH; 1968 adder->destination_y = cursor[unit].y; 1969 adder->slow_dest_dy = CHAR_HEIGHT; 1970 /* 1971 * load SOURCE origin and vectors 1972 */ 1973 if ((chr - ' ') > (CHARS - 1)) { 1974 printf("Invalid character (x)%x in blitc\n",chr); 1975 chr = ' '; 1976 } 1977 /* 1978 * X position is modulo the number of characters per line 1979 */ 1980 adder->source_1_x = FONT_X + 1981 (((chr - ' ') % (MAX_SCREEN_X/CHAR_WIDTH)) * CHAR_WIDTH); 1982 /* 1983 * Point to either first or second row 1984 */ 1985 adder->source_1_y = 2048 - 15 * 1986 (((chr - ' ')/(MAX_SCREEN_X/CHAR_WIDTH)) + 1); 1987 adder->source_1_dx = CHAR_WIDTH; 1988 adder->source_1_dy = CHAR_HEIGHT; 1989 write_ID(adder, LU_FUNCTION_R1, FULL_SRC_RESOLUTION | LF_SOURCE); 1990 adder->cmd = RASTEROP | OCRB | 0 | S1E | DTE; 1991 /* 1992 * update console cursor coordinates 1993 */ 1994 cursor[unit].x += CHAR_WIDTH; 1995 if (nograph) 1996 dga->x_cursor = TRANX(cursor[unit].x); 1997 if (cursor[unit].x > (1024 - CHAR_WIDTH)) { 1998 blitc(unit, '\r'); 1999 blitc(unit, '\n'); 2000 } 2001 2002 } /* blitc */ 2003 2004 /* 2005 * INTERRUPT SERVICE ROUTINES 2006 */ 2007 2008 /* 2009 * Service "DMA DONE" interrupt condition 2010 */ 2011 2012 static void 2013 qddint(void *arg) 2014 { 2015 device_t dv = arg; 2016 struct DMAreq_header *header; 2017 struct DMAreq *request; 2018 volatile struct dga *dga; 2019 volatile struct adder *adder; 2020 int cookie; /* DMA adrs for QDSS */ 2021 int unit = device_unit(dv); 2022 2023 (void)spl4(); /* allow interval timer in */ 2024 2025 /* 2026 * init pointers 2027 */ 2028 header = DMAheader[unit]; /* register for optimization */ 2029 dga = (struct dga *) qdmap[unit].dga; 2030 adder = (struct adder *) qdmap[unit].adder; 2031 2032 /* 2033 * if this interrupt flagged as bogus for interrupt flushing purposes.. 2034 */ 2035 if (DMA_ISIGNORE(header)) { 2036 DMA_CLRIGNORE(header); 2037 return; 2038 } 2039 2040 /* 2041 * dump a DMA hardware error message if appropriate 2042 */ 2043 if (dga->csr & DMA_ERR) { 2044 2045 if (dga->csr & PARITY_ERR) 2046 printf("qd%d: qddint: DMA hardware parity fault.\n", unit); 2047 2048 if (dga->csr & BUS_ERR) 2049 printf("qd%d: qddint: DMA hardware bus error.\n", unit); 2050 } 2051 2052 /* 2053 * if this was a DMA from user space... 2054 */ 2055 if (qdflags[unit].user_dma) { 2056 qdflags[unit].user_dma = 0; 2057 wakeup((void *)&qdflags[unit].user_dma); 2058 return; 2059 } 2060 2061 /* 2062 * if we're doing DMA request queue services, field the error condition 2063 */ 2064 if (dga->csr & DMA_ERR) { 2065 2066 dga->csr &= ~0x0600; /* halt DMA (reset fifo) */ 2067 dga->csr |= DMA_ERR; /* clear error condition */ 2068 adder->command = CANCEL; /* cancel adder activity */ 2069 2070 DMA_SETERROR(header); /* flag error in header status word */ 2071 DMA_CLRACTIVE(header); 2072 header->DMAreq[header->oldest].DMAdone |= HARD_ERROR; 2073 header->newest = header->oldest; 2074 header->used = 0; 2075 2076 selnotify(&qdrsel[unit], 0, 0); 2077 2078 if (dga->bytcnt_lo != 0) { 2079 dga->bytcnt_lo = 0; 2080 dga->bytcnt_hi = 0; 2081 DMA_SETIGNORE(header); 2082 } 2083 return; 2084 } 2085 2086 /* 2087 * if the DMA request queue is now becoming non-full, 2088 * wakeup "select" client. 2089 */ 2090 if (DMA_ISFULL(header)) { 2091 selnotify(&qdrsel[unit], 0, 0); 2092 } 2093 2094 header->DMAreq[header->oldest].DMAdone |= REQUEST_DONE; 2095 QDlast_DMAtype = header->DMAreq[header->oldest].DMAtype; 2096 2097 /* check for unexpected interrupt */ 2098 if (DMA_ISEMPTY(header)) 2099 return; 2100 2101 DMA_GETEND(header); /* update request queue indices */ 2102 2103 /* 2104 * if no more DMA pending, wake up "select" client and exit 2105 */ 2106 if (DMA_ISEMPTY(header)) { 2107 selnotify(&qdrsel[unit], 0, 0); 2108 DMA_CLRACTIVE(header); /* flag DMA done */ 2109 return; 2110 } 2111 2112 /* 2113 * initiate next DMA xfer 2114 */ 2115 request = DMA_GETBEGIN(header); 2116 if (request->DMAtype != QDlast_DMAtype) { 2117 dga->csr &= ~0x0600; /* halt DMA (reset fifo) */ 2118 adder->command = CANCEL; /* cancel adder activity */ 2119 } 2120 2121 2122 switch (request->DMAtype) { 2123 2124 case DISPLIST: 2125 if (request->DMAtype != QDlast_DMAtype) { 2126 dga->csr |= DL_ENB; 2127 dga->csr &= ~(BTOP_ENB | BYTE_DMA); 2128 } 2129 break; 2130 2131 case PTOB: 2132 if (request->DMAtype != QDlast_DMAtype) { 2133 if (request->DMAdone & BYTE_PACK) 2134 dga->csr |= (PTOB_ENB | BYTE_DMA); 2135 else { 2136 dga->csr |= PTOB_ENB; 2137 dga->csr &= ~BYTE_DMA; 2138 } 2139 } 2140 break; 2141 2142 case BTOP: 2143 if (request->DMAtype != QDlast_DMAtype) { 2144 if (request->DMAdone & BYTE_PACK) { 2145 dga->csr &= ~DL_ENB; 2146 dga->csr |= (BTOP_ENB | BYTE_DMA); 2147 } 2148 else { 2149 dga->csr |= BTOP_ENB; 2150 dga->csr &= ~(BYTE_DMA | DL_ENB); 2151 } 2152 } 2153 break; 2154 default: 2155 printf("qd%d: qddint: illegal DMAtype parameter.\n", unit); 2156 DMA_CLRACTIVE(header); /* flag DMA done */ 2157 return; 2158 } 2159 2160 if (request->DMAdone & COUNT_ZERO) { 2161 dga->csr &= ~SET_DONE_FIFO; 2162 } 2163 else if (request->DMAdone & FIFO_EMPTY) { 2164 dga->csr |= SET_DONE_FIFO; 2165 } 2166 2167 if (request->DMAdone & WORD_PACK) 2168 dga->csr &= ~BYTE_DMA; 2169 else if (request->DMAdone & BYTE_PACK) 2170 dga->csr |= BYTE_DMA; 2171 2172 dga->csr |= DMA_IE; 2173 QDlast_DMAtype = request->DMAtype; 2174 2175 cookie = ((int)request->bufp - (int)header) + (int)header->QBAreg; 2176 2177 dga->adrs_lo = (short) cookie; 2178 dga->adrs_hi = (short) (cookie >> 16); 2179 2180 dga->bytcnt_lo = (short) request->length; 2181 dga->bytcnt_hi = (short) (request->length >> 16); 2182 2183 return; 2184 } 2185 2186 /* 2187 * ADDER interrupt service routine 2188 */ 2189 static void 2190 qdaint(void *arg) 2191 { 2192 device_t dv = arg; 2193 volatile struct adder *adder; 2194 struct color_buf *cbuf; 2195 int i; 2196 struct rgb *rgbp; 2197 volatile short *red; 2198 volatile short *green; 2199 volatile short *blue; 2200 int unit = device_unit(dv); 2201 2202 (void)spl4(); /* allow interval timer in */ 2203 2204 adder = (struct adder *) qdmap[unit].adder; 2205 2206 /* 2207 * service the vertical blank interrupt (VSYNC bit) by loading 2208 * any pending color map load request 2209 */ 2210 if (adder->status & VSYNC) { 2211 adder->status &= ~VSYNC; /* clear the interrupt */ 2212 cbuf = color_buf[unit]; 2213 if (cbuf->status & LOAD_COLOR_MAP) { 2214 2215 red = (short *) qdmap[unit].red; 2216 green = (short *) qdmap[unit].green; 2217 blue = (short *) qdmap[unit].blue; 2218 2219 for (i = cbuf->count, rgbp = cbuf->rgb; 2220 --i >= 0; rgbp++) { 2221 red[rgbp->offset] = (short) rgbp->red; 2222 green[rgbp->offset] = (short) rgbp->green; 2223 blue[rgbp->offset] = (short) rgbp->blue; 2224 } 2225 2226 cbuf->status &= ~LOAD_COLOR_MAP; 2227 } 2228 } 2229 2230 /* 2231 * service the scroll interrupt (FRAME_SYNC bit) 2232 */ 2233 if (adder->status & FRAME_SYNC) { 2234 adder->status &= ~FRAME_SYNC; /* clear the interrupt */ 2235 2236 if (scroll[unit]->status & LOAD_REGS) { 2237 2238 for (i = 1000, adder->status = 0; i > 0 && 2239 !(adder->status&ID_SCROLL_READY); --i) 2240 ; 2241 2242 if (i == 0) { 2243 printf("qd%d: qdaint: timeout on ID_SCROLL_READY\n", 2244 qd); 2245 return; 2246 } 2247 2248 adder->ID_scroll_data = scroll[unit]->viper_constant; 2249 adder->ID_scroll_command = ID_LOAD | SCROLL_CONSTANT; 2250 2251 adder->y_scroll_constant = 2252 scroll[unit]->y_scroll_constant; 2253 adder->y_offset_pending = scroll[unit]->y_offset; 2254 2255 if (scroll[unit]->status & LOAD_INDEX) { 2256 2257 adder->x_index_pending = 2258 scroll[unit]->x_index_pending; 2259 adder->y_index_pending = 2260 scroll[unit]->y_index_pending; 2261 } 2262 2263 scroll[unit]->status = 0x00; 2264 } 2265 } 2266 } 2267 2268 /* 2269 * DUART input interrupt service routine 2270 * 2271 * XXX - this routine should be broken out - it is essentially 2272 * straight line code. 2273 */ 2274 2275 static void 2276 qdiint(void *arg) 2277 { 2278 device_t dv = arg; 2279 struct _vs_event *event; 2280 struct qdinput *eqh; 2281 volatile struct dga *dga; 2282 volatile struct duart *duart; 2283 struct mouse_report *new_rep; 2284 struct tty *tp; 2285 u_short chr; 2286 u_short status; 2287 u_short data; 2288 u_short key; 2289 char do_wakeup = 0; /* flag to do a select wakeup call */ 2290 char a, b, c; /* mouse button test variables */ 2291 int unit = device_unit(dv); 2292 2293 (void)spl4(); /* allow interval timer in */ 2294 2295 eqh = eq_header[unit]; /* optimized as a register */ 2296 new_rep = ¤t_rep[unit]; 2297 duart = (struct duart *) qdmap[unit].duart; 2298 2299 /* 2300 * if the graphic device is turned on.. 2301 */ 2302 if (qdflags[unit].inuse & GRAPHIC_DEV) { 2303 /* 2304 * empty DUART 2305 */ 2306 while (duart->statusA&RCV_RDY || duart->statusB&RCV_RDY) { 2307 /* 2308 * pick up LK-201 input (if any) 2309 */ 2310 if (duart->statusA&RCV_RDY) { 2311 2312 /* if error condition, then reset it */ 2313 2314 if (duart->statusA&0x70) { 2315 duart->cmdA = 0x40; 2316 continue; 2317 } 2318 2319 /* event queue full now? (overflow condition) */ 2320 2321 if (ISFULL(eqh) == TRUE) { 2322 printf( 2323 "qd%d: qdiint: event queue overflow\n", 2324 qd); 2325 break; 2326 } 2327 2328 /* 2329 * Check for various keyboard errors */ 2330 2331 key = duart->dataA & 0xFF; 2332 2333 if (key==LK_POWER_ERROR || 2334 key==LK_KDOWN_ERROR || 2335 key == LK_INPUT_ERROR || 2336 key == LK_OUTPUT_ERROR) { 2337 printf( 2338 "qd%d: qdiint: keyboard error, code = %x\n", 2339 qd,key); 2340 return; 2341 } 2342 2343 if (key < LK_LOWEST) 2344 return; 2345 2346 ++do_wakeup; /* request a select wakeup call */ 2347 2348 event = PUTBEGIN(eqh); 2349 PUTEND(eqh); 2350 2351 event->vse_key = key; 2352 event->vse_key &= 0x00FF; 2353 event->vse_x = eqh->curs_pos.x; 2354 event->vse_y = eqh->curs_pos.y; 2355 event->vse_time = TOY; 2356 event->vse_type = VSE_BUTTON; 2357 event->vse_direction = VSE_KBTRAW; 2358 event->vse_device = VSE_DKB; 2359 } 2360 2361 /* 2362 * pick up the mouse input (if any) */ 2363 2364 if ((status = duart->statusB) & RCV_RDY && 2365 qdflags[unit].pntr_id == MOUSE_ID) { 2366 2367 if (status & 0x70) { 2368 duart->cmdB = 0x40; 2369 continue; 2370 } 2371 2372 /* event queue full now? (overflow condition) */ 2373 2374 if (ISFULL(eqh) == TRUE) { 2375 printf( 2376 "qd%d: qdiint: event queue overflow\n", 2377 qd); 2378 break; 2379 } 2380 2381 data = duart->dataB; /* get report byte */ 2382 ++new_rep->bytcnt; /* bump report byte count */ 2383 2384 /* 2385 * if 1st byte of report.. */ 2386 2387 if ( data & START_FRAME) { 2388 new_rep->state = data; 2389 if (new_rep->bytcnt > 1) { 2390 /* start of new frame */ 2391 new_rep->bytcnt = 1; 2392 /* ..continue looking */ 2393 continue; 2394 } 2395 } 2396 2397 /* 2398 * if 2nd byte of report.. */ 2399 2400 else if (new_rep->bytcnt == 2) { 2401 new_rep->dx = data & 0x00FF; 2402 } 2403 2404 /* 2405 * if 3rd byte of report, load input event queue */ 2406 2407 else if (new_rep->bytcnt == 3) { 2408 2409 new_rep->dy = data & 0x00FF; 2410 new_rep->bytcnt = 0; 2411 2412 /* 2413 * if mouse position has changed.. */ 2414 2415 if (new_rep->dx != 0 || new_rep->dy != 0) { 2416 2417 /* 2418 * calculate acceleration factor, if needed */ 2419 2420 if (qdflags[unit].curs_acc > ACC_OFF) { 2421 2422 if (qdflags[unit].curs_thr <= new_rep->dx) 2423 new_rep->dx += 2424 (new_rep->dx - qdflags[unit].curs_thr) 2425 * qdflags[unit].curs_acc; 2426 2427 if (qdflags[unit].curs_thr <= new_rep->dy) 2428 new_rep->dy += 2429 (new_rep->dy - qdflags[unit].curs_thr) 2430 * qdflags[unit].curs_acc; 2431 } 2432 2433 /* 2434 * update cursor position coordinates */ 2435 2436 if (new_rep->state & X_SIGN) { 2437 eqh->curs_pos.x += new_rep->dx; 2438 if (eqh->curs_pos.x > 1023) 2439 eqh->curs_pos.x = 1023; 2440 } 2441 else { 2442 eqh->curs_pos.x -= new_rep->dx; 2443 if (eqh->curs_pos.x < -15) 2444 eqh->curs_pos.x = -15; 2445 } 2446 2447 if (new_rep->state & Y_SIGN) { 2448 eqh->curs_pos.y -= new_rep->dy; 2449 if (eqh->curs_pos.y < -15) 2450 eqh->curs_pos.y = -15; 2451 } 2452 else { 2453 eqh->curs_pos.y += new_rep->dy; 2454 if (eqh->curs_pos.y > 863) 2455 eqh->curs_pos.y = 863; 2456 } 2457 2458 /* 2459 * update cursor screen position */ 2460 2461 dga = (struct dga *) qdmap[unit].dga; 2462 dga->x_cursor = TRANX(eqh->curs_pos.x); 2463 dga->y_cursor = TRANY(eqh->curs_pos.y); 2464 2465 /* 2466 * if cursor is in the box, no event report */ 2467 2468 if (eqh->curs_pos.x <= eqh->curs_box.right && 2469 eqh->curs_pos.x >= eqh->curs_box.left && 2470 eqh->curs_pos.y >= eqh->curs_box.top && 2471 eqh->curs_pos.y <= eqh->curs_box.bottom ) { 2472 goto GET_MBUTTON; 2473 } 2474 2475 /* 2476 * report the mouse motion event */ 2477 2478 event = PUTBEGIN(eqh); 2479 PUTEND(eqh); 2480 2481 ++do_wakeup; /* request a select wakeup call */ 2482 2483 event->vse_x = eqh->curs_pos.x; 2484 event->vse_y = eqh->curs_pos.y; 2485 2486 event->vse_device = VSE_MOUSE; /* mouse */ 2487 event->vse_type = VSE_MMOTION; /* pos changed */ 2488 event->vse_key = 0; 2489 event->vse_direction = 0; 2490 event->vse_time = TOY; /* time stamp */ 2491 } 2492 2493 GET_MBUTTON: 2494 /* 2495 * if button state has changed */ 2496 2497 a = new_rep->state & 0x07; /*mask nonbutton bits */ 2498 b = last_rep[unit].state & 0x07; 2499 2500 if (a ^ b) { 2501 2502 for ( c = 1; c < 8; c <<= 1) { 2503 2504 if (!( c & (a ^ b))) /* this button change? */ 2505 continue; 2506 2507 /* event queue full? (overflow condition) */ 2508 2509 if (ISFULL(eqh) == TRUE) { 2510 printf("qd%d: qdiint: event queue overflow\n", qd); 2511 break; 2512 } 2513 2514 event = PUTBEGIN(eqh); /* get new event */ 2515 PUTEND(eqh); 2516 2517 ++do_wakeup; /* request select wakeup */ 2518 2519 event->vse_x = eqh->curs_pos.x; 2520 event->vse_y = eqh->curs_pos.y; 2521 2522 event->vse_device = VSE_MOUSE; /* mouse */ 2523 event->vse_type = VSE_BUTTON; /* new button */ 2524 event->vse_time = TOY; /* time stamp */ 2525 2526 /* flag changed button and if up or down */ 2527 2528 if (c == RIGHT_BUTTON) 2529 event->vse_key = VSE_RIGHT_BUTTON; 2530 else if (c == MIDDLE_BUTTON) 2531 event->vse_key = VSE_MIDDLE_BUTTON; 2532 else if (c == LEFT_BUTTON) 2533 event->vse_key = VSE_LEFT_BUTTON; 2534 2535 /* set bit = button depressed */ 2536 2537 if (c & a) 2538 event->vse_direction = VSE_KBTDOWN; 2539 else 2540 event->vse_direction = VSE_KBTUP; 2541 } 2542 } 2543 2544 /* refresh last report */ 2545 2546 last_rep[unit] = current_rep[unit]; 2547 2548 } /* get last byte of report */ 2549 } else if ((status = duart->statusB)&RCV_RDY && 2550 qdflags[unit].pntr_id == TABLET_ID) { 2551 /* 2552 * pickup tablet input, if any 2553 */ 2554 if (status&0x70) { 2555 duart->cmdB = 0x40; 2556 continue; 2557 } 2558 /* 2559 * event queue full now? (overflow condition) 2560 */ 2561 if (ISFULL(eqh) == TRUE) { 2562 printf("qd%d: qdiint: event queue overflow\n", qd); 2563 break; 2564 } 2565 2566 data = duart->dataB; /* get report byte */ 2567 ++new_rep->bytcnt; /* bump report byte count */ 2568 2569 /* 2570 * if 1st byte of report.. */ 2571 2572 if (data & START_FRAME) { 2573 new_rep->state = data; 2574 if (new_rep->bytcnt > 1) { 2575 new_rep->bytcnt = 1; /* start of new frame */ 2576 continue; /* ..continue looking */ 2577 } 2578 } 2579 2580 /* 2581 * if 2nd byte of report.. */ 2582 2583 else if (new_rep->bytcnt == 2) { 2584 new_rep->dx = data & 0x3F; 2585 } 2586 2587 /* 2588 * if 3rd byte of report.. */ 2589 2590 else if (new_rep->bytcnt == 3) { 2591 new_rep->dx |= (data & 0x3F) << 6; 2592 } 2593 2594 /* 2595 * if 4th byte of report.. */ 2596 2597 else if (new_rep->bytcnt == 4) { 2598 new_rep->dy = data & 0x3F; 2599 } 2600 2601 /* 2602 * if 5th byte of report, load input event queue */ 2603 2604 else if (new_rep->bytcnt == 5) { 2605 2606 new_rep->dy |= (data & 0x3F) << 6; 2607 new_rep->bytcnt = 0; 2608 2609 /* 2610 * update cursor position coordinates */ 2611 2612 new_rep->dx /= qdflags[unit].tab_res; 2613 new_rep->dy = (2200 - new_rep->dy) 2614 / qdflags[unit].tab_res; 2615 2616 if (new_rep->dx > 1023) { 2617 new_rep->dx = 1023; 2618 } 2619 if (new_rep->dy > 863) { 2620 new_rep->dy = 863; 2621 } 2622 2623 /* 2624 * report an event if the puck/stylus has moved 2625 */ 2626 2627 if (eqh->curs_pos.x != new_rep->dx || 2628 eqh->curs_pos.y != new_rep->dy) { 2629 2630 eqh->curs_pos.x = new_rep->dx; 2631 eqh->curs_pos.y = new_rep->dy; 2632 2633 /* 2634 * update cursor screen position */ 2635 2636 dga = (struct dga *) qdmap[unit].dga; 2637 dga->x_cursor = TRANX(eqh->curs_pos.x); 2638 dga->y_cursor = TRANY(eqh->curs_pos.y); 2639 2640 /* 2641 * if cursor is in the box, no event report 2642 */ 2643 2644 if (eqh->curs_pos.x <= eqh->curs_box.right && 2645 eqh->curs_pos.x >= eqh->curs_box.left && 2646 eqh->curs_pos.y >= eqh->curs_box.top && 2647 eqh->curs_pos.y <= eqh->curs_box.bottom ) { 2648 goto GET_TBUTTON; 2649 } 2650 2651 /* 2652 * report the tablet motion event */ 2653 2654 event = PUTBEGIN(eqh); 2655 PUTEND(eqh); 2656 2657 ++do_wakeup; /* request a select wakeup call */ 2658 2659 event->vse_x = eqh->curs_pos.x; 2660 event->vse_y = eqh->curs_pos.y; 2661 2662 event->vse_device = VSE_TABLET; /* tablet */ 2663 /* 2664 * right now, X handles tablet motion the same 2665 * as mouse motion 2666 */ 2667 event->vse_type = VSE_MMOTION; /* pos changed */ 2668 event->vse_key = 0; 2669 event->vse_direction = 0; 2670 event->vse_time = TOY; /* time stamp */ 2671 } 2672 GET_TBUTTON: 2673 /* 2674 * if button state has changed */ 2675 2676 a = new_rep->state & 0x1E; /* mask nonbutton bits */ 2677 b = last_rep[unit].state & 0x1E; 2678 2679 if (a ^ b) { 2680 2681 /* event queue full now? (overflow condition) */ 2682 2683 if (ISFULL(eqh) == TRUE) { 2684 printf("qd%d: qdiint: event queue overflow\n",qd); 2685 break; 2686 } 2687 2688 event = PUTBEGIN(eqh); /* get new event */ 2689 PUTEND(eqh); 2690 2691 ++do_wakeup; /* request a select wakeup call */ 2692 2693 event->vse_x = eqh->curs_pos.x; 2694 event->vse_y = eqh->curs_pos.y; 2695 2696 event->vse_device = VSE_TABLET; /* tablet */ 2697 event->vse_type = VSE_BUTTON; /* button changed */ 2698 event->vse_time = TOY; /* time stamp */ 2699 2700 /* define the changed button and if up or down */ 2701 2702 for ( c = 1; c <= 0x10; c <<= 1) { 2703 if (c & (a ^ b)) { 2704 if (c == T_LEFT_BUTTON) 2705 event->vse_key = VSE_T_LEFT_BUTTON; 2706 else if (c == T_FRONT_BUTTON) 2707 event->vse_key = VSE_T_FRONT_BUTTON; 2708 else if (c == T_RIGHT_BUTTON) 2709 event->vse_key = VSE_T_RIGHT_BUTTON; 2710 else if (c == T_BACK_BUTTON) 2711 event->vse_key = VSE_T_BACK_BUTTON; 2712 break; 2713 } 2714 } 2715 2716 /* set bit = button depressed */ 2717 2718 if (c & a) 2719 event->vse_direction = VSE_KBTDOWN; 2720 else 2721 event->vse_direction = VSE_KBTUP; 2722 } 2723 2724 /* refresh last report */ 2725 2726 last_rep[unit] = current_rep[unit]; 2727 2728 } /* get last byte of report */ 2729 } /* pick up tablet input */ 2730 2731 } /* while input available.. */ 2732 2733 /* 2734 * do select wakeup 2735 */ 2736 if (do_wakeup) { 2737 selnotify(&qdrsel[unit], 0, 0); 2738 do_wakeup = 0; 2739 } 2740 } else { 2741 /* 2742 * if the graphic device is not turned on, this is console input 2743 */ 2744 if (qdpolling) 2745 return; 2746 2747 if (unit >= qd_cd.cd_ndevs || device_lookup(&qd_cd, unit) == NULL) 2748 return; /* no such device or address */ 2749 2750 tp = qd_tty[unit << 2]; 2751 2752 /* 2753 * Get a character from the keyboard. 2754 */ 2755 while (duart->statusA&RCV_RDY) { 2756 key = duart->dataA; 2757 key &= 0xFF; 2758 /* 2759 * Check for various keyboard errors 2760 */ 2761 if (key == LK_POWER_ERROR || key == LK_KDOWN_ERROR || 2762 key == LK_INPUT_ERROR || key == LK_OUTPUT_ERROR) { 2763 printf("qd%d: qdiint: Keyboard error, code = %x\n",qd,key); 2764 return; 2765 } 2766 2767 if (key < LK_LOWEST) 2768 return; 2769 2770 /* 2771 * See if its a state change key */ 2772 2773 switch (key) { 2774 2775 case LOCK: 2776 q_keyboard.lock ^= 0xffff; /* toggle */ 2777 if (q_keyboard.lock) 2778 led_control(qd, LK_LED_ENABLE, 2779 LK_LED_LOCK); 2780 else 2781 led_control(qd, LK_LED_DISABLE, 2782 LK_LED_LOCK); 2783 return; 2784 2785 case SHIFT: 2786 q_keyboard.shift ^= 0xFFFF; 2787 return; 2788 2789 case CNTRL: 2790 q_keyboard.cntrl ^= 0xFFFF; 2791 return; 2792 2793 case ALLUP: 2794 q_keyboard.cntrl = 0; 2795 q_keyboard.shift = 0; 2796 return; 2797 2798 case REPEAT: 2799 chr = q_keyboard.last; 2800 break; 2801 2802 /* 2803 * Test for cntrl characters. If set, see if the character 2804 * is elligible to become a control character. */ 2805 2806 default: 2807 2808 if (q_keyboard.cntrl) { 2809 chr = q_key[key]; 2810 if (chr >= ' ' && chr <= '~') 2811 chr &= 0x1F; 2812 else if (chr >= 0xA1 && chr <= 0xFE) 2813 chr &= 0x9F; 2814 } 2815 else if( q_keyboard.lock || q_keyboard.shift ) 2816 chr = q_shift_key[key]; 2817 else 2818 chr = q_key[key]; 2819 break; 2820 } 2821 2822 q_keyboard.last = chr; 2823 2824 /* 2825 * Check for special function keys */ 2826 2827 if (chr & 0x100) { 2828 char *string; 2829 string = q_special[chr & 0x7F]; 2830 while(*string) 2831 (*tp->t_linesw->l_rint)(*string++, tp); 2832 } 2833 else { 2834 #ifdef DDB 2835 /* Check for kernel debugger escape here */ 2836 int j; 2837 2838 j = kdbrint(chr&0177); 2839 2840 if (j == 1) /* Escape received, just return */ 2841 return; 2842 2843 if (j == 2) /* Second char wasn't 'D' */ 2844 (*tp->t_linesw->l_rint)(27, tp); 2845 #endif 2846 (*tp->t_linesw->l_rint)(chr&0177, tp); 2847 } 2848 } 2849 } 2850 } /* qdiint */ 2851 2852 /* 2853 * 2854 * Clear the QDSS screen 2855 * 2856 * >>> NOTE <<< 2857 * 2858 * This code requires that certain adder initialization be valid. To 2859 * assure that this requirement is satisfied, this routine should be 2860 * called only after calling the "setup_dragon()" function. 2861 * 2862 * Clear the bitmap a piece at a time. Since the fast scroll clear 2863 * only clears the current displayed portion of the bitmap put a 2864 * temporary value in the y limit register so we can access whole 2865 * bitmap 2866 * 2867 */ 2868 void 2869 clear_qd_screen(int unit) 2870 { 2871 volatile struct adder *adder; 2872 adder = (struct adder *) qdmap[unit].adder; 2873 2874 adder->x_limit = 1024; 2875 adder->y_limit = 2048 - CHAR_HEIGHT; 2876 adder->y_offset_pending = 0; 2877 #define WSV (void)wait_status(adder, VSYNC); (void)wait_status(adder, VSYNC) 2878 WSV; 2879 adder->y_scroll_constant = SCROLL_ERASE; 2880 WSV; 2881 adder->y_offset_pending = 864; 2882 WSV; 2883 adder->y_scroll_constant = SCROLL_ERASE; 2884 WSV; 2885 adder->y_offset_pending = 1728; 2886 WSV; 2887 adder->y_scroll_constant = SCROLL_ERASE; 2888 WSV; 2889 adder->y_offset_pending = 0; /* back to normal */ 2890 WSV; 2891 adder->x_limit = MAX_SCREEN_X; 2892 adder->y_limit = MAX_SCREEN_Y + FONT_HEIGHT; 2893 #undef WSV 2894 2895 } /* clear_qd_screen */ 2896 2897 /* 2898 * kernel console output to the glass tty 2899 */ 2900 void 2901 qdcnputc(dev_t dev, int chr) 2902 { 2903 2904 /* 2905 * if system is now physical, forget it (ie: crash DUMP) 2906 */ 2907 if ((mfpr(PR_MAPEN) & 1) == 0) 2908 return; 2909 2910 blitc(0, (u_char)(chr & 0xff)); 2911 if ((chr & 0177) == '\n') 2912 blitc(0, '\r'); 2913 2914 } /* qdputc */ 2915 2916 /* 2917 * load the mouse cursor's template RAM bitmap 2918 */ 2919 void 2920 ldcursor(int unit, short *bitmap) 2921 { 2922 volatile struct dga *dga; 2923 volatile short *temp; 2924 int i; 2925 int curs; 2926 2927 dga = (struct dga *) qdmap[unit].dga; 2928 temp = (short *) qdmap[unit].template; 2929 2930 if (dga->csr & CURS_ENB) { /* if the cursor is enabled.. */ 2931 curs = -1; /* ..note that.. */ 2932 dga->csr &= ~CURS_ENB; /* ..and shut it off */ 2933 } else 2934 curs = 0; 2935 2936 dga->csr &= ~CURS_ENB; /* shut off the cursor */ 2937 2938 temp += (8 * 1024) - 32; /* cursor is 32 WORDS from the end */ 2939 /* ..of the 8k WORD template space */ 2940 for (i = 0; i < 32; ++i) 2941 *temp++ = *bitmap++; 2942 2943 if (curs) { /* if cursor was enabled.. */ 2944 dga->csr |= CURS_ENB; /* ..turn it back on */ 2945 } 2946 2947 } /* ldcursor */ 2948 2949 /* 2950 * Put the console font in the QDSS off-screen memory 2951 */ 2952 void 2953 ldfont(int unit) 2954 { 2955 volatile struct adder *adder; 2956 2957 int i, j, k, max_chars_line; 2958 short packed; 2959 2960 adder = (struct adder *) qdmap[unit].adder; 2961 2962 /* 2963 * setup VIPER operand control registers 2964 */ 2965 write_ID(adder, MASK_1, 0xFFFF); 2966 write_ID(adder, VIPER_Z_LOAD | FOREGROUND_COLOR_Z, 255); 2967 write_ID(adder, VIPER_Z_LOAD | BACKGROUND_COLOR_Z, 0); 2968 2969 write_ID(adder, SRC1_OCR_B, 2970 EXT_NONE | INT_NONE | ID | BAR_SHIFT_DELAY); 2971 write_ID(adder, SRC2_OCR_B, 2972 EXT_NONE | INT_NONE | ID | BAR_SHIFT_DELAY); 2973 write_ID(adder, DST_OCR_B, 2974 EXT_SOURCE | INT_NONE | NO_ID | NO_BAR_SHIFT_DELAY); 2975 2976 adder->rasterop_mode = DST_WRITE_ENABLE | DST_INDEX_ENABLE | NORMAL; 2977 2978 /* 2979 * load destination data 2980 */ 2981 (void)wait_status(adder, RASTEROP_COMPLETE); 2982 2983 adder->destination_x = FONT_X; 2984 adder->destination_y = FONT_Y; 2985 #if FONT_WIDTH > MAX_SCREEN_X 2986 adder->fast_dest_dx = MAX_SCREEN_X; 2987 #else 2988 adder->fast_dest_dx = FONT_WIDTH; 2989 #endif 2990 adder->slow_dest_dy = CHAR_HEIGHT; 2991 2992 /* 2993 * setup for processor to bitmap xfer */ 2994 2995 write_ID(adder, CS_UPDATE_MASK, 0x0001); 2996 adder->cmd = PBT | OCRB | 2 | DTE | 2; 2997 2998 /* 2999 * Figure out how many characters can be stored on one "line" of 3000 * offscreen memory. 3001 */ 3002 max_chars_line = MAX_SCREEN_X/(CHAR_WIDTH*2); 3003 if ((CHARS/2 + CHARS%2) < max_chars_line) 3004 max_chars_line = CHARS/2 + CHARS%2; 3005 3006 /* 3007 * iteratively do the processor to bitmap xfer */ 3008 3009 for (i = 0; i < ROWS; ++i) { 3010 3011 /* PTOB a scan line */ 3012 3013 for (j = 0, k = i; j < max_chars_line; ++j) { 3014 /* PTOB one scan of a char cell */ 3015 3016 packed = q_font[k]; 3017 k += ROWS; 3018 packed |= ((short)q_font[k] << 8); 3019 k += ROWS; 3020 3021 (void)wait_status(adder, TX_READY); 3022 adder->id_data = packed; 3023 } 3024 } 3025 3026 /* 3027 * (XXX XXX XXX - should remove) 3028 * 3029 * Copy the second row of characters. Subtract the first 3030 * row from the total number. Divide this quantity by 2 3031 * because 2 chars are stored in a short in the PTOB loop 3032 * below. Figure out how many characters can be stored on 3033 * one "line" of offscreen memory 3034 */ 3035 3036 max_chars_line = MAX_SCREEN_X/(CHAR_WIDTH*2); 3037 if ((CHARS/2 + CHARS%2) < max_chars_line) 3038 return; 3039 max_chars_line = (CHARS/2 + CHARS%2) - max_chars_line; /* 95 - 64 */ 3040 /* Paranoia check to see if 3rd row may be needed */ 3041 if (max_chars_line > (MAX_SCREEN_X/(CHAR_WIDTH*2))) 3042 max_chars_line = MAX_SCREEN_X/(CHAR_WIDTH*2); 3043 3044 adder->destination_x = FONT_X; 3045 adder->destination_y = FONT_Y - CHAR_HEIGHT; 3046 adder->fast_dest_dx = max_chars_line * CHAR_WIDTH * 2; 3047 adder->slow_dest_dy = CHAR_HEIGHT; 3048 3049 /* 3050 * setup for processor to bitmap xfer 3051 */ 3052 write_ID(adder, CS_UPDATE_MASK, 0x0001); 3053 adder->cmd = PBT | OCRB | 2 | DTE | 2; 3054 3055 /* 3056 * iteratively do the processor to bitmap xfer 3057 */ 3058 for (i = 0; i < ROWS; ++i) { 3059 /* 3060 * PTOB a scan line 3061 */ 3062 for (j = 0, k = i; j < max_chars_line; ++j) { 3063 /* 3064 * PTOB one scan of a char cell 3065 */ 3066 packed = q_font[k + FONT_OFFSET]; 3067 k += ROWS; 3068 packed |= ((short)q_font[k + FONT_OFFSET] << 8); 3069 k += ROWS; 3070 (void)wait_status(adder, TX_READY); 3071 adder->id_data = packed; 3072 } 3073 } 3074 3075 } /* ldfont */ 3076 3077 3078 /* 3079 * Disable or enable polling. This is used when entering or leaving the 3080 * kernel debugger. 3081 */ 3082 void 3083 qdcnpollc(dev_t dev, int onoff) 3084 { 3085 qdpolling = onoff; 3086 } 3087 3088 3089 /* 3090 * Get a character from the LK201 (polled) 3091 */ 3092 int 3093 qdcngetc(dev_t dev) 3094 { 3095 short key; 3096 char chr; 3097 volatile struct duart *duart; 3098 3099 duart = (struct duart *) qdmap[0].duart; 3100 3101 /* 3102 * Get a character from the keyboard. 3103 */ 3104 LOOP: 3105 while (!(duart->statusA&RCV_RDY)) 3106 ; 3107 3108 key = duart->dataA; 3109 key &= 0xFF; 3110 3111 /* 3112 * Check for various keyboard errors */ 3113 3114 if (key == LK_POWER_ERROR || key == LK_KDOWN_ERROR || 3115 key == LK_INPUT_ERROR || key == LK_OUTPUT_ERROR) { 3116 printf("Keyboard error, code = %x\n", key); 3117 return(0); 3118 } 3119 3120 if (key < LK_LOWEST) 3121 return(0); 3122 3123 /* 3124 * See if its a state change key 3125 */ 3126 switch (key) { 3127 3128 case LOCK: 3129 q_keyboard.lock ^= 0xffff; /* toggle */ 3130 if (q_keyboard.lock) 3131 led_control(0, LK_LED_ENABLE, LK_LED_LOCK); 3132 else 3133 led_control(0, LK_LED_DISABLE, LK_LED_LOCK); 3134 goto LOOP; 3135 3136 case SHIFT: 3137 q_keyboard.shift ^= 0xFFFF; 3138 goto LOOP; 3139 3140 case CNTRL: 3141 q_keyboard.cntrl ^= 0xFFFF; 3142 goto LOOP; 3143 3144 case ALLUP: 3145 q_keyboard.cntrl = 0; 3146 q_keyboard.shift = 0; 3147 goto LOOP; 3148 3149 case REPEAT: 3150 chr = q_keyboard.last; 3151 break; 3152 3153 /* 3154 * Test for cntrl characters. If set, see if the character 3155 * is elligible to become a control character. 3156 */ 3157 default: 3158 3159 if (q_keyboard.cntrl) { 3160 chr = q_key[key]; 3161 if (chr >= ' ' && chr <= '~') 3162 chr &= 0x1F; 3163 } 3164 else if ( q_keyboard.lock || q_keyboard.shift ) 3165 chr = q_shift_key[key]; 3166 else 3167 chr = q_key[key]; 3168 break; 3169 } 3170 3171 if (chr < ' ' && chr > '~') /* if input is non-displayable */ 3172 return(0); /* ..then pitch it! */ 3173 3174 q_keyboard.last = chr; 3175 3176 /* 3177 * Check for special function keys */ 3178 3179 if (chr & 0x80) /* pitch the function keys */ 3180 return(0); 3181 else 3182 return(chr); 3183 3184 } /* qdgetc */ 3185 3186 /* 3187 * led_control()... twiddle LK-201 LED's 3188 */ 3189 void 3190 led_control(int unit, int cmd, int led_mask) 3191 { 3192 int i; 3193 volatile struct duart *duart; 3194 3195 duart = (struct duart *)qdmap[unit].duart; 3196 3197 for (i = 1000; i > 0; --i) { 3198 if (duart->statusA&XMT_RDY) { 3199 duart->dataA = cmd; 3200 break; 3201 } 3202 } 3203 for (i = 1000; i > 0; --i) { 3204 if (duart->statusA&XMT_RDY) { 3205 duart->dataA = led_mask; 3206 break; 3207 } 3208 } 3209 return; 3210 3211 } /* led_control */ 3212 3213 /* 3214 * scroll_up()... move the screen up one character height 3215 */ 3216 void 3217 scroll_up(volatile struct adder *adder) 3218 { 3219 /* 3220 * setup VIPER operand control registers 3221 */ 3222 (void)wait_status(adder, ADDRESS_COMPLETE); 3223 write_ID(adder, CS_UPDATE_MASK, 0x00FF); /* select all planes */ 3224 write_ID(adder, MASK_1, 0xFFFF); 3225 write_ID(adder, VIPER_Z_LOAD | FOREGROUND_COLOR_Z, 255); 3226 write_ID(adder, VIPER_Z_LOAD | BACKGROUND_COLOR_Z, 0); 3227 write_ID(adder, SRC1_OCR_B, 3228 EXT_NONE | INT_SOURCE | ID | BAR_SHIFT_DELAY); 3229 write_ID(adder, DST_OCR_B, 3230 EXT_NONE | INT_NONE | NO_ID | NO_BAR_SHIFT_DELAY); 3231 /* 3232 * load DESTINATION origin and vectors 3233 */ 3234 adder->fast_dest_dy = 0; 3235 adder->slow_dest_dx = 0; 3236 adder->error_1 = 0; 3237 adder->error_2 = 0; 3238 adder->rasterop_mode = DST_WRITE_ENABLE | NORMAL; 3239 adder->destination_x = 0; 3240 adder->fast_dest_dx = 1024; 3241 adder->destination_y = 0; 3242 adder->slow_dest_dy = 864 - CHAR_HEIGHT; 3243 /* 3244 * load SOURCE origin and vectors 3245 */ 3246 adder->source_1_x = 0; 3247 adder->source_1_dx = 1024; 3248 adder->source_1_y = 0 + CHAR_HEIGHT; 3249 adder->source_1_dy = 864 - CHAR_HEIGHT; 3250 write_ID(adder, LU_FUNCTION_R1, FULL_SRC_RESOLUTION | LF_SOURCE); 3251 adder->cmd = RASTEROP | OCRB | 0 | S1E | DTE; 3252 /* 3253 * do a rectangle clear of last screen line 3254 */ 3255 write_ID(adder, MASK_1, 0xffff); 3256 write_ID(adder, SOURCE, 0xffff); 3257 write_ID(adder,DST_OCR_B, 3258 (EXT_NONE | INT_NONE | NO_ID | NO_BAR_SHIFT_DELAY)); 3259 write_ID(adder, VIPER_Z_LOAD | FOREGROUND_COLOR_Z, 0); 3260 adder->error_1 = 0; 3261 adder->error_2 = 0; 3262 adder->slow_dest_dx = 0; /* set up the width of */ 3263 adder->slow_dest_dy = CHAR_HEIGHT; /* rectangle */ 3264 adder->rasterop_mode = (NORMAL | DST_WRITE_ENABLE) ; 3265 (void)wait_status(adder, RASTEROP_COMPLETE); 3266 adder->destination_x = 0; 3267 adder->destination_y = 864 - CHAR_HEIGHT; 3268 adder->fast_dest_dx = 1024; /* set up the height */ 3269 adder->fast_dest_dy = 0; /* of rectangle */ 3270 write_ID(adder, LU_FUNCTION_R2, (FULL_SRC_RESOLUTION | LF_SOURCE)); 3271 adder->cmd = (RASTEROP | OCRB | LF_R2 | DTE ) ; 3272 3273 } /* scroll_up */ 3274 3275 /* 3276 * init shared memory pointers and structures 3277 */ 3278 void 3279 init_shared(int unit) 3280 { 3281 volatile struct dga *dga; 3282 3283 dga = (struct dga *) qdmap[unit].dga; 3284 3285 /* 3286 * initialize the event queue pointers and header */ 3287 3288 eq_header[unit] = (struct qdinput *) 3289 ((((int)event_shared & ~(0x01FF)) + 512) 3290 + (EVENT_BUFSIZE * unit)); 3291 eq_header[unit]->curs_pos.x = 0; 3292 eq_header[unit]->curs_pos.y = 0; 3293 dga->x_cursor = TRANX(eq_header[unit]->curs_pos.x); 3294 dga->y_cursor = TRANY(eq_header[unit]->curs_pos.y); 3295 eq_header[unit]->curs_box.left = 0; 3296 eq_header[unit]->curs_box.right = 0; 3297 eq_header[unit]->curs_box.top = 0; 3298 eq_header[unit]->curs_box.bottom = 0; 3299 /* 3300 * assign a pointer to the DMA I/O buffer for this QDSS. 3301 */ 3302 DMAheader[unit] = (struct DMAreq_header *) 3303 (((int)(&DMA_shared[0] + 512) & ~0x1FF) 3304 + (DMAbuf_size * unit)); 3305 DMAheader[unit]->DMAreq = (struct DMAreq *) ((int)DMAheader[unit] 3306 + sizeof(struct DMAreq_header)); 3307 DMAheader[unit]->QBAreg = 0; 3308 DMAheader[unit]->status = 0; 3309 DMAheader[unit]->shared_size = DMAbuf_size; 3310 DMAheader[unit]->used = 0; 3311 DMAheader[unit]->size = 10; /* default = 10 requests */ 3312 DMAheader[unit]->oldest = 0; 3313 DMAheader[unit]->newest = 0; 3314 /* 3315 * assign a pointer to the scroll structure for this QDSS. 3316 */ 3317 scroll[unit] = (struct scroll *) 3318 (((int)(&scroll_shared[0] + 512) & ~0x1FF) 3319 + (sizeof(struct scroll) * unit)); 3320 scroll[unit]->status = 0; 3321 scroll[unit]->viper_constant = 0; 3322 scroll[unit]->y_scroll_constant = 0; 3323 scroll[unit]->y_offset = 0; 3324 scroll[unit]->x_index_pending = 0; 3325 scroll[unit]->y_index_pending = 0; 3326 /* 3327 * assign a pointer to the color map write buffer for this QDSS 3328 */ 3329 color_buf[unit] = (struct color_buf *) 3330 (((int)(&color_shared[0] + 512) & ~0x1FF) 3331 + (COLOR_BUFSIZ * unit)); 3332 color_buf[unit]->status = 0; 3333 color_buf[unit]->count = 0; 3334 3335 } /* init_shared */ 3336 3337 /* 3338 * init the ADDER, VIPER, bitmaps, & color map 3339 */ 3340 void 3341 setup_dragon(int unit) 3342 { 3343 3344 volatile struct adder *adder; 3345 volatile struct dga *dga; 3346 volatile short *memcsr; 3347 int i; 3348 short top; /* clipping/scrolling boundaries */ 3349 short bottom; 3350 short right; 3351 short left; 3352 volatile short *red; /* color map pointers */ 3353 volatile short *green; 3354 volatile short *blue; 3355 3356 /* 3357 * init for setup 3358 */ 3359 adder = (struct adder *) qdmap[unit].adder; 3360 dga = (struct dga *) qdmap[unit].dga; 3361 memcsr = (short *) qdmap[unit].memcsr; 3362 dga->csr &= ~(DMA_IE | 0x700); /* halt DMA and kill the intrpts */ 3363 *memcsr = SYNC_ON; /* blank screen and turn off LED's */ 3364 adder->command = CANCEL; 3365 /* 3366 * set monitor timing 3367 */ 3368 adder->x_scan_count_0 = 0x2800; 3369 adder->x_scan_count_1 = 0x1020; 3370 adder->x_scan_count_2 = 0x003A; 3371 adder->x_scan_count_3 = 0x38F0; 3372 adder->x_scan_count_4 = 0x6128; 3373 adder->x_scan_count_5 = 0x093A; 3374 adder->x_scan_count_6 = 0x313C; 3375 adder->sync_phase_adj = 0x0100; 3376 adder->x_scan_conf = 0x00C8; 3377 /* 3378 * got a bug in secound pass ADDER! lets take care of it 3379 * 3380 * normally, just use the code in the following bug fix code, but to 3381 * make repeated demos look pretty, load the registers as if there was 3382 * no bug and then test to see if we are getting sync 3383 */ 3384 adder->y_scan_count_0 = 0x135F; 3385 adder->y_scan_count_1 = 0x3363; 3386 adder->y_scan_count_2 = 0x2366; 3387 adder->y_scan_count_3 = 0x0388; 3388 /* 3389 * if no sync, do the bug fix code 3390 */ 3391 if (wait_status(adder, VSYNC) == BAD) { 3392 /* first load all Y scan registers with very short frame and 3393 * wait for scroll service. This guarantees at least one SYNC 3394 * to fix the pass 2 Adder initialization bug (synchronizes 3395 * XCINCH with DMSEEDH) 3396 */ 3397 adder->y_scan_count_0 = 0x01; 3398 adder->y_scan_count_1 = 0x01; 3399 adder->y_scan_count_2 = 0x01; 3400 adder->y_scan_count_3 = 0x01; 3401 /* 3402 * delay at least 1 full frame time 3403 */ 3404 (void)wait_status(adder, VSYNC); 3405 (void)wait_status(adder, VSYNC); 3406 /* 3407 * now load the REAL sync values (in reverse order just to 3408 * be safe. 3409 */ 3410 adder->y_scan_count_3 = 0x0388; 3411 adder->y_scan_count_2 = 0x2366; 3412 adder->y_scan_count_1 = 0x3363; 3413 adder->y_scan_count_0 = 0x135F; 3414 } 3415 *memcsr = SYNC_ON | UNBLANK; /* turn off leds and turn on video */ 3416 /* 3417 * zero the index registers 3418 */ 3419 adder->x_index_pending = 0; 3420 adder->y_index_pending = 0; 3421 adder->x_index_new = 0; 3422 adder->y_index_new = 0; 3423 adder->x_index_old = 0; 3424 adder->y_index_old = 0; 3425 adder->pause = 0; 3426 /* 3427 * set rasterop mode to normal pen down 3428 */ 3429 adder->rasterop_mode = DST_WRITE_ENABLE | DST_INDEX_ENABLE | NORMAL; 3430 /* 3431 * set the rasterop registers to a default values 3432 */ 3433 adder->source_1_dx = 1; 3434 adder->source_1_dy = 1; 3435 adder->source_1_x = 0; 3436 adder->source_1_y = 0; 3437 adder->destination_x = 0; 3438 adder->destination_y = 0; 3439 adder->fast_dest_dx = 1; 3440 adder->fast_dest_dy = 0; 3441 adder->slow_dest_dx = 0; 3442 adder->slow_dest_dy = 1; 3443 adder->error_1 = 0; 3444 adder->error_2 = 0; 3445 /* 3446 * scale factor = UNITY 3447 */ 3448 adder->fast_scale = UNITY; 3449 adder->slow_scale = UNITY; 3450 /* 3451 * set the source 2 parameters 3452 */ 3453 adder->source_2_x = 0; 3454 adder->source_2_y = 0; 3455 adder->source_2_size = 0x0022; 3456 /* 3457 * initialize plane addresses for eight vipers 3458 */ 3459 write_ID(adder, CS_UPDATE_MASK, 0x0001); 3460 write_ID(adder, PLANE_ADDRESS, 0x0000); 3461 write_ID(adder, CS_UPDATE_MASK, 0x0002); 3462 write_ID(adder, PLANE_ADDRESS, 0x0001); 3463 write_ID(adder, CS_UPDATE_MASK, 0x0004); 3464 write_ID(adder, PLANE_ADDRESS, 0x0002); 3465 write_ID(adder, CS_UPDATE_MASK, 0x0008); 3466 write_ID(adder, PLANE_ADDRESS, 0x0003); 3467 write_ID(adder, CS_UPDATE_MASK, 0x0010); 3468 write_ID(adder, PLANE_ADDRESS, 0x0004); 3469 write_ID(adder, CS_UPDATE_MASK, 0x0020); 3470 write_ID(adder, PLANE_ADDRESS, 0x0005); 3471 write_ID(adder, CS_UPDATE_MASK, 0x0040); 3472 write_ID(adder, PLANE_ADDRESS, 0x0006); 3473 write_ID(adder, CS_UPDATE_MASK, 0x0080); 3474 write_ID(adder, PLANE_ADDRESS, 0x0007); 3475 /* 3476 * initialize the external registers. 3477 */ 3478 write_ID(adder, CS_UPDATE_MASK, 0x00FF); 3479 write_ID(adder, CS_SCROLL_MASK, 0x00FF); 3480 /* 3481 * initialize resolution mode 3482 */ 3483 write_ID(adder, MEMORY_BUS_WIDTH, 0x000C); /* bus width = 16 */ 3484 write_ID(adder, RESOLUTION_MODE, 0x0000); /* one bit/pixel */ 3485 /* 3486 * initialize viper registers 3487 */ 3488 write_ID(adder, SCROLL_CONSTANT, SCROLL_ENABLE|VIPER_LEFT|VIPER_UP); 3489 write_ID(adder, SCROLL_FILL, 0x0000); 3490 /* 3491 * set clipping and scrolling limits to full screen 3492 */ 3493 for (i = 1000, adder->status = 0; 3494 i > 0 && !(adder->status&ADDRESS_COMPLETE); --i) 3495 ; 3496 if (i == 0) 3497 printf("qd%d: setup_dragon: timeout on ADDRESS_COMPLETE\n",unit); 3498 top = 0; 3499 bottom = 2048; 3500 left = 0; 3501 right = 1024; 3502 adder->x_clip_min = left; 3503 adder->x_clip_max = right; 3504 adder->y_clip_min = top; 3505 adder->y_clip_max = bottom; 3506 adder->scroll_x_min = left; 3507 adder->scroll_x_max = right; 3508 adder->scroll_y_min = top; 3509 adder->scroll_y_max = bottom; 3510 (void)wait_status(adder, VSYNC); /* wait at LEAST 1 full frame */ 3511 (void)wait_status(adder, VSYNC); 3512 adder->x_index_pending = left; 3513 adder->y_index_pending = top; 3514 adder->x_index_new = left; 3515 adder->y_index_new = top; 3516 adder->x_index_old = left; 3517 adder->y_index_old = top; 3518 3519 for (i = 1000, adder->status = 0; i > 0 && 3520 !(adder->status&ADDRESS_COMPLETE) ; --i) 3521 ; 3522 if (i == 0) 3523 printf("qd%d: setup_dragon: timeout on ADDRESS_COMPLETE\n",unit); 3524 3525 write_ID(adder, LEFT_SCROLL_MASK, 0x0000); 3526 write_ID(adder, RIGHT_SCROLL_MASK, 0x0000); 3527 /* 3528 * set source and the mask register to all ones (ie: white) o 3529 */ 3530 write_ID(adder, SOURCE, 0xFFFF); 3531 write_ID(adder, MASK_1, 0xFFFF); 3532 write_ID(adder, VIPER_Z_LOAD | FOREGROUND_COLOR_Z, 255); 3533 write_ID(adder, VIPER_Z_LOAD | BACKGROUND_COLOR_Z, 0); 3534 /* 3535 * initialize Operand Control Register banks for fill command 3536 */ 3537 write_ID(adder, SRC1_OCR_A, EXT_NONE | INT_M1_M2 | NO_ID | WAIT); 3538 write_ID(adder, SRC2_OCR_A, EXT_NONE | INT_SOURCE | NO_ID | NO_WAIT); 3539 write_ID(adder, DST_OCR_A, EXT_NONE | INT_NONE | NO_ID | NO_WAIT); 3540 write_ID(adder, SRC1_OCR_B, EXT_NONE | INT_SOURCE | NO_ID | WAIT); 3541 write_ID(adder, SRC2_OCR_B, EXT_NONE | INT_M1_M2 | NO_ID | NO_WAIT); 3542 write_ID(adder, DST_OCR_B, EXT_NONE | INT_NONE | NO_ID | NO_WAIT); 3543 /* 3544 * init Logic Unit Function registers, (these are just common values, 3545 * and may be changed as required). 3546 */ 3547 write_ID(adder, LU_FUNCTION_R1, FULL_SRC_RESOLUTION | LF_SOURCE); 3548 write_ID(adder, LU_FUNCTION_R2, FULL_SRC_RESOLUTION | LF_SOURCE | 3549 INV_M1_M2); 3550 write_ID(adder, LU_FUNCTION_R3, FULL_SRC_RESOLUTION | LF_D_OR_S); 3551 write_ID(adder, LU_FUNCTION_R4, FULL_SRC_RESOLUTION | LF_D_XOR_S); 3552 /* 3553 * load the color map for black & white 3554 */ 3555 for (i = 0, adder->status = 0; i < 10000 && !(adder->status&VSYNC); ++i) 3556 ; 3557 3558 if (i == 0) 3559 printf("qd%d: setup_dragon: timeout on VSYNC\n", unit); 3560 3561 red = (short *) qdmap[unit].red; 3562 green = (short *) qdmap[unit].green; 3563 blue = (short *) qdmap[unit].blue; 3564 3565 *red++ = 0x00; /* black */ 3566 *green++ = 0x00; 3567 *blue++ = 0x00; 3568 3569 *red-- = 0xFF; /* white */ 3570 *green-- = 0xFF; 3571 *blue-- = 0xFF; 3572 3573 /* 3574 * set color map for mouse cursor 3575 */ 3576 3577 red += 254; 3578 green += 254; 3579 blue += 254; 3580 3581 *red++ = 0x00; /* black */ 3582 *green++ = 0x00; 3583 *blue++ = 0x00; 3584 3585 *red = 0xFF; /* white */ 3586 *green = 0xFF; 3587 *blue = 0xFF; 3588 3589 } /* setup_dragon */ 3590 3591 /* 3592 * Init the DUART and set defaults in input 3593 */ 3594 void 3595 setup_input(int unit) 3596 { 3597 volatile struct duart *duart; /* DUART register structure pointer */ 3598 int i, bits; 3599 char id_byte; 3600 3601 duart = (struct duart *) qdmap[unit].duart; 3602 duart->imask = 0; 3603 3604 /* 3605 * setup the DUART for kbd & pointing device 3606 */ 3607 duart->cmdA = RESET_M; /* reset mode reg ptr for kbd */ 3608 duart->modeA = 0x13; /* 8 bits, no parity, rcv IE, */ 3609 /* no RTS control,char error mode */ 3610 duart->modeA = 0x07; /* 1 stop bit,CTS does not IE XMT */ 3611 /* no RTS control,no echo or loop */ 3612 duart->cmdB = RESET_M; /* reset mode reg pntr for host */ 3613 duart->modeB = 0x07; /* 8 bits, odd parity, rcv IE.. */ 3614 /* ..no RTS cntrl, char error mode */ 3615 duart->modeB = 0x07; /* 1 stop bit,CTS does not IE XMT */ 3616 /* no RTS control,no echo or loop */ 3617 duart->auxctl = 0x00; /* baud rate set 1 */ 3618 duart->clkselA = 0x99; /* 4800 baud for kbd */ 3619 duart->clkselB = 0x99; /* 4800 baud for mouse */ 3620 3621 /* reset everything for keyboard */ 3622 3623 for (bits = RESET_M; bits < START_BREAK; bits += 0x10) 3624 duart->cmdA = bits; 3625 3626 /* reset everything for host */ 3627 3628 for (bits = RESET_M; bits < START_BREAK; bits += 0x10) 3629 duart->cmdB = bits; 3630 3631 duart->cmdA = EN_RCV | EN_XMT; /* enbl xmt & rcv for kbd */ 3632 duart->cmdB = EN_RCV | EN_XMT; /* enbl xmt & rcv for pointer device */ 3633 3634 /* 3635 * init keyboard defaults (DUART channel A) 3636 */ 3637 for (i = 500; i > 0; --i) { 3638 if (duart->statusA&XMT_RDY) { 3639 duart->dataA = LK_DEFAULTS; 3640 break; 3641 } 3642 } 3643 3644 for (i = 100000; i > 0; --i) { 3645 if (duart->statusA&RCV_RDY) { 3646 break; 3647 } 3648 } 3649 3650 if (duart->dataA) /* flush the ACK */ 3651 ; 3652 3653 /* 3654 * identify the pointing device 3655 */ 3656 for (i = 500; i > 0; --i) { 3657 if (duart->statusB&XMT_RDY) { 3658 duart->dataB = SELF_TEST; 3659 break; 3660 } 3661 } 3662 3663 /* 3664 * wait for 1st byte of self test report */ 3665 3666 for (i = 100000; i > 0; --i) { 3667 if (duart->statusB&RCV_RDY) { 3668 break; 3669 } 3670 } 3671 3672 if (i == 0) { 3673 printf("qd[%d]: setup_input: timeout on 1st byte of self test\n" 3674 ,unit); 3675 goto OUT; 3676 } 3677 3678 if (duart->dataB) 3679 ; 3680 3681 /* 3682 * wait for ID byte of self test report 3683 */ 3684 for (i = 100000; i > 0; --i) { 3685 if (duart->statusB&RCV_RDY) { 3686 break; 3687 } 3688 } 3689 3690 if (i == 0) { 3691 printf("qd[%d]: setup_input: timeout on 2nd byte of self test\n", unit); 3692 goto OUT; 3693 } 3694 3695 id_byte = duart->dataB; 3696 3697 /* 3698 * wait for other bytes to come in 3699 */ 3700 for (i = 100000; i > 0; --i) { 3701 if (duart->statusB & RCV_RDY) { 3702 if (duart->dataB) 3703 ; 3704 break; 3705 } 3706 } 3707 if (i == 0) { 3708 printf("qd[%d]: setup_input: timeout on 3rd byte of self test\n", unit); 3709 goto OUT; 3710 } 3711 for (i = 100000; i > 0; --i) { 3712 if (duart->statusB&RCV_RDY) { 3713 if (duart->dataB) 3714 ; 3715 break; 3716 } 3717 } 3718 if (i == 0) { 3719 printf("qd[%d]: setup_input: timeout on 4th byte of self test\n", unit); 3720 goto OUT; 3721 } 3722 /* 3723 * flag pointing device type and set defaults 3724 */ 3725 for (i=100000; i>0; --i) 3726 ; /*XXX*/ 3727 3728 if ((id_byte & 0x0F) != TABLET_ID) { 3729 qdflags[unit].pntr_id = MOUSE_ID; 3730 3731 for (i = 500; i > 0; --i) { 3732 if (duart->statusB&XMT_RDY) { 3733 duart->dataB = INC_STREAM_MODE; 3734 break; 3735 } 3736 } 3737 } 3738 else { 3739 qdflags[unit].pntr_id = TABLET_ID; 3740 3741 for (i = 500; i > 0; --i) { 3742 if (duart->statusB&XMT_RDY) { 3743 duart->dataB = T_STREAM; 3744 break; 3745 } 3746 } 3747 } 3748 OUT: 3749 duart->imask = qdflags[unit].duart_imask; 3750 3751 } /* setup_input */ 3752 3753 /* 3754 * delay for at least one display frame time 3755 * 3756 * return: BAD means that we timed out without ever seeing the 3757 * vertical sync status bit 3758 * GOOD otherwise 3759 */ 3760 int 3761 wait_status(volatile struct adder *adder, int mask) 3762 { 3763 int i; 3764 3765 for (i = 10000, adder->status = 0 ; i > 0 && 3766 !(adder->status&mask) ; --i) 3767 ; 3768 3769 if (i == 0) { 3770 printf("wait_status: timeout polling for 0x%x in adder->status\n", mask); 3771 return(BAD); 3772 } 3773 3774 return(GOOD); 3775 3776 } /* wait_status */ 3777 3778 /* 3779 * write out onto the ID bus 3780 */ 3781 void 3782 write_ID(volatile struct adder *adder, short adrs, short data) 3783 { 3784 int i; 3785 3786 for (i = 100000, adder->status = 0 ; 3787 i > 0 && !(adder->status&ADDRESS_COMPLETE) ; --i) 3788 ; 3789 3790 if (i == 0) 3791 goto ERR; 3792 3793 for (i = 100000, adder->status = 0 ; 3794 i > 0 && !(adder->status&TX_READY) ; --i) 3795 ; 3796 3797 if (i > 0) { 3798 adder->id_data = data; 3799 adder->command = ID_LOAD | adrs; 3800 return ; 3801 } 3802 3803 ERR: 3804 printf("write_ID: timeout trying to write to VIPER\n"); 3805 return ; 3806 3807 } /* write_ID */ 3808