1 /* $NetBSD: if_qt.c,v 1.27 2022/09/02 23:48:10 thorpej Exp $ */ 2 /* 3 * Copyright (c) 1992 Steven M. Schultz 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. The name of the author may not be used to endorse or promote products 15 * derived from this software without specific prior written permission 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 * 28 * @(#)if_qt.c 1.2 (2.11BSD) 2/20/93 29 */ 30 /* 31 * 32 * Modification History 33 * 23-Feb-92 -- sms 34 * Rewrite the buffer handling so that fewer than the maximum number of 35 * buffers may be used (32 receive and 12 transmit buffers consume 66+kb 36 * of main system memory in addition to the internal structures in the 37 * networking code). A freelist of available buffers is maintained now. 38 * When I/O operations complete the associated buffer is placed on the 39 * freelist (a single linked list for simplicity) and when an I/O is 40 * started a buffer is pulled off the list. 41 * 42 * 20-Feb-92 -- sms 43 * It works! Darned board couldn't handle "short" rings - those rings 44 * where only half the entries were made available to the board (the 45 * ring descriptors were the full size, merely half the entries were 46 * flagged as belonging always to the driver). Grrrr. Would have thought 47 * the board could skip over those entries reserved by the driver. 48 * Now to find a way not to have to allocated 32+12 times 1.5kb worth of 49 * buffers... 50 * 51 * 03-Feb-92 -- sms 52 * Released but still not working. The driver now responds to arp and 53 * ping requests. The board is apparently not returning ring descriptors 54 * to the driver so eventually we run out of buffers. Back to the 55 * drawing board. 56 * 57 * 28-Dec-92 -- sms 58 * Still not released. Hiatus in finding free time and thin-netting 59 * the systems (many thanks Terry!). 60 * Added logic to dynamically allocate a vector and initialize it. 61 * 62 * 23-Oct-92 -- sms 63 * The INIT block must (apparently) be quadword aligned [no thanks to 64 * the manual for not mentioning that fact]. The necessary alignment 65 * is achieved by allocating the INIT block from main memory ('malloc' 66 * guarantees click alignment) and mapping it as needed (which is _very_ 67 * infrequently). A check for quadword alignment of the ring descriptors 68 * was added - at present the descriptors are properly aligned, if this 69 * should change then something will have to be done (like do it "right"). 70 * Darned alignment restrictions! 71 * 72 * A couple of typos were corrected (missing parentheses, reversed 73 * arguments to printf calls, etc). 74 * 75 * 13-Oct-92 -- sms@wlv.iipo.gtegsc.com 76 * Created based on the DELQA-PLUS addendum to DELQA User's Guide. 77 * This driver ('qt') is selected at system configuration time. If the 78 * board * is not a DELQA-YM an error message will be printed and the 79 * interface will not be attached. 80 */ 81 82 #include <sys/cdefs.h> 83 __KERNEL_RCSID(0, "$NetBSD: if_qt.c,v 1.27 2022/09/02 23:48:10 thorpej Exp $"); 84 85 #include "opt_inet.h" 86 87 #include <sys/param.h> 88 #include <sys/systm.h> 89 #include <sys/mbuf.h> 90 #include <sys/protosw.h> 91 #include <sys/socket.h> 92 #include <sys/ioctl.h> 93 #include <sys/device.h> 94 #include <sys/errno.h> 95 #include <sys/syslog.h> 96 #include <sys/time.h> 97 #include <sys/kernel.h> 98 99 #include <net/if.h> 100 #include <net/if_ether.h> 101 #include <net/route.h> 102 #include <net/bpf.h> 103 104 #ifdef INET 105 #include <sys/domain.h> 106 #include <netinet/in.h> 107 #include <netinet/in_systm.h> 108 #include <netinet/in_var.h> 109 #include <netinet/ip.h> 110 #endif 111 112 #include <sys/bus.h> 113 114 #include <dev/qbus/ubavar.h> 115 #include <dev/qbus/if_uba.h> 116 #include <dev/qbus/if_qtreg.h> 117 118 #define NRCV QT_MAX_RCV /* Receive descriptors (must be == 32) */ 119 #define NXMT QT_MAX_XMT /* Transmit descriptors (must be == 12) */ 120 #if NRCV != 32 || NXMT != 12 121 hardware requires these sizes. 122 #endif 123 124 /* 125 * Control data structures, must be in DMA-friendly memory. 126 */ 127 struct qt_cdata { 128 struct qt_init qc_init; /* Init block */ 129 struct qt_rring qc_r[NRCV]; /* Receive descriptor ring */ 130 struct qt_tring qc_t[NXMT]; /* Transmit descriptor ring */ 131 }; 132 133 struct qt_softc { 134 device_t sc_dev; /* Configuration common part */ 135 struct ethercom is_ec; /* common part - must be first */ 136 struct uba_softc *sc_uh; 137 struct evcnt sc_intrcnt; /* Interrupt counting */ 138 #define is_if is_ec.ec_if /* network-visible interface */ 139 u_int8_t is_addr[ETHER_ADDR_LEN]; /* hardware Ethernet address */ 140 bus_space_tag_t sc_iot; 141 bus_addr_t sc_ioh; 142 143 struct ubinfo sc_ui; /* control block address desc */ 144 struct qt_cdata *sc_ib; /* virt address of ctrl block */ 145 struct qt_cdata *sc_pib; /* phys address of ctrl block */ 146 147 struct ifubinfo sc_ifuba; /* UNIBUS resources */ 148 struct ifrw sc_ifr[NRCV]; /* UNIBUS receive buffer maps */ 149 struct ifxmt sc_ifw[NXMT]; /* UNIBUS receive buffer maps */ 150 151 int rindex; /* Receive Completed Index */ 152 int nxtrcv; /* Next Receive Index */ 153 int nrcv; /* Number of Receives active */ 154 155 int xnext; /* Next descriptor to transmit */ 156 int xlast; /* Last descriptor transmitted */ 157 int nxmit; /* # packets in send queue */ 158 159 short vector; /* Interrupt vector assigned */ 160 }; 161 162 static int qtmatch(device_t, cfdata_t, void *); 163 static void qtattach(device_t, device_t, void *); 164 static void lance_setladrf(struct ethercom *ec, uint16_t *af); 165 static void qtintr(void *); 166 static int qtinit(struct ifnet *); 167 static int qtioctl(struct ifnet *, u_long, void *); 168 static int qtturbo(struct qt_softc *); 169 static void qtstart(struct ifnet *ifp); 170 static void qtstop(struct ifnet *ifp, int disable); 171 static void qtsrr(struct qt_softc *, int); 172 static void qtrint(struct qt_softc *sc); 173 static void qttint(struct qt_softc *sc); 174 175 /* static void qtrestart(struct qt_softc *sc); */ 176 177 CFATTACH_DECL_NEW(qt, sizeof(struct qt_softc), 178 qtmatch, qtattach, NULL, NULL); 179 180 /* 181 * Maximum packet size needs to include 4 bytes for the CRC 182 * on received packets. 183 */ 184 #define MAXPACKETSIZE (ETHERMTU + sizeof (struct ether_header) + 4) 185 #define MINPACKETSIZE 64 186 187 #define QT_WCSR(csr, val) \ 188 bus_space_write_2(sc->sc_iot, sc->sc_ioh, csr, val) 189 #define QT_RCSR(csr) \ 190 bus_space_read_2(sc->sc_iot, sc->sc_ioh, csr) 191 192 193 #define loint(x) ((int)(x) & 0xffff) 194 #define hiint(x) (((int)(x) >> 16) & 0x3f) 195 196 /* 197 * Check if this card is a turbo delqa. 198 */ 199 int 200 qtmatch(device_t parent, cfdata_t cf, void *aux) 201 { 202 struct qt_softc ssc; 203 struct qt_softc *sc = &ssc; 204 struct uba_attach_args *ua = aux; 205 struct uba_softc *uh = device_private(parent); 206 struct qt_init *qi; 207 struct ubinfo ui; 208 209 sc->sc_iot = ua->ua_iot; 210 sc->sc_ioh = ua->ua_ioh; 211 if (qtturbo(sc) == 0) 212 return 0; /* Not a turbo card */ 213 214 /* Force the card to interrupt */ 215 ui.ui_size = sizeof(struct qt_init); 216 if (ubmemalloc(uh, &ui, 0)) 217 return 0; /* Failed */ 218 qi = (struct qt_init *)ui.ui_vaddr; 219 memset(qi, 0, sizeof(struct qt_init)); 220 qi->vector = uh->uh_lastiv - 4; 221 qi->options = INIT_OPTIONS_INT; 222 223 QT_WCSR(CSR_IBAL, loint(ui.ui_baddr)); 224 QT_WCSR(CSR_IBAH, hiint(ui.ui_baddr)); 225 QT_WCSR(CSR_SRQR, 2); 226 delay(100000); /* Wait some time for interrupt */ 227 QT_WCSR(CSR_SRQR, 3); /* Stop card */ 228 229 ubmemfree(uh, &ui); 230 231 return 10; 232 } 233 234 235 /* 236 * Interface exists. More accurately, something exists at the CSR (see 237 * sys/sys_net.c) -- there's no guarantee it's a DELQA-YM. 238 * 239 * The ring descriptors are initialized, the buffers allocated using first the 240 * DMA region allocated at network load time and then later main memory. The 241 * INIT block is filled in and the device is poked/probed to see if it really 242 * is a DELQA-YM. If the device is not a -YM then a message is printed and 243 * the 'if_attach' call is skipped. For a -YM the START command is issued, 244 * but the device is not marked as running|up - that happens at interrupt level 245 * when the device interrupts to say it has started. 246 */ 247 248 void 249 qtattach(device_t parent, device_t self, void *aux) 250 { 251 struct qt_softc *sc = device_private(self); 252 struct ifnet *ifp = &sc->is_if; 253 struct uba_attach_args *ua = aux; 254 255 sc->sc_dev = self; 256 257 uba_intr_establish(ua->ua_icookie, ua->ua_cvec, qtintr, sc, 258 &sc->sc_intrcnt); 259 evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, ua->ua_evcnt, 260 device_xname(sc->sc_dev), "intr"); 261 262 sc->sc_uh = device_private(parent); 263 sc->sc_iot = ua->ua_iot; 264 sc->sc_ioh = ua->ua_ioh; 265 sc->sc_uh->uh_lastiv -= 4; 266 sc->vector = sc->sc_uh->uh_lastiv; 267 268 /* 269 * Now allocate the buffers and initialize the buffers. This should _never_ 270 * fail because main memory is allocated after the DMA pool is used up. 271 */ 272 273 sc->is_addr[0] = QT_RCSR(0); 274 sc->is_addr[1] = QT_RCSR(2); 275 sc->is_addr[2] = QT_RCSR(4); 276 sc->is_addr[3] = QT_RCSR(6); 277 sc->is_addr[4] = QT_RCSR(8); 278 sc->is_addr[5] = QT_RCSR(10); 279 280 strcpy(ifp->if_xname, device_xname(sc->sc_dev)); 281 ifp->if_softc = sc; 282 ifp->if_flags = IFF_BROADCAST|IFF_MULTICAST; 283 ifp->if_ioctl = qtioctl; 284 ifp->if_start = qtstart; 285 ifp->if_init = qtinit; 286 ifp->if_stop = qtstop; 287 IFQ_SET_READY(&ifp->if_snd); 288 289 printf("\n%s: delqa-plus in Turbo mode, hardware address %s\n", 290 device_xname(sc->sc_dev), ether_sprintf(sc->is_addr)); 291 if_attach(ifp); 292 ether_ifattach(ifp, sc->is_addr); 293 } 294 295 int 296 qtturbo(struct qt_softc *sc) 297 { 298 int i; 299 300 /* 301 * Issue the software reset. Delay 150us. The board should now be in 302 * DELQA-Normal mode. Set ITB and DEQTA select. If both bits do not 303 * stay turned on then the board is not a DELQA-YM. 304 */ 305 QT_WCSR(CSR_ARQR, ARQR_SR); 306 QT_WCSR(CSR_ARQR, 0); 307 delay(150L); 308 309 QT_WCSR(CSR_SRR, 0x8001); /* MS | ITB */ 310 i = QT_RCSR(CSR_SRR); 311 QT_WCSR(CSR_SRR, 0x8000); /* Turn off ITB, set DELQA select */ 312 if (i != 0x8001) 313 return(0); 314 /* 315 * Board is a DELQA-YM. Send the commands to enable Turbo mode. Delay 316 * 1 second, testing the SRR register every millisecond to see if the 317 * board has shifted to Turbo mode. 318 */ 319 QT_WCSR(CSR_XCR0, 0x0baf); 320 QT_WCSR(CSR_XCR1, 0xff00); 321 for (i = 0; i < 1000; i++) 322 { 323 if ((QT_RCSR(CSR_SRR) & SRR_RESP) == 1) 324 break; 325 delay(1000L); 326 } 327 if (i >= 1000) 328 { 329 printf("qt !Turbo\n"); 330 return(0); 331 } 332 return(1); 333 } 334 335 #define ETHER_CMP(a,b) memcmp((a), (b), 6) 336 337 /* 338 * Set up the logical address filter. 339 */ 340 void 341 lance_setladrf(struct ethercom *ec, uint16_t *af) 342 { 343 struct ifnet *ifp = &ec->ec_if; 344 struct ether_multi *enm; 345 uint32_t crc; 346 struct ether_multistep step; 347 348 /* 349 * Set up multicast address filter by passing all multicast addresses 350 * through a crc generator, and then using the high order 6 bits as an 351 * index into the 64 bit logical address filter. The high order bit 352 * selects the word, while the rest of the bits select the bit within 353 * the word. 354 */ 355 356 if (ifp->if_flags & IFF_PROMISC) 357 goto allmulti; 358 359 af[0] = af[1] = af[2] = af[3] = 0x0000; 360 361 ETHER_LOCK(ec); 362 ETHER_FIRST_MULTI(step, ec, enm); 363 while (enm != NULL) { 364 if (ETHER_CMP(enm->enm_addrlo, enm->enm_addrhi)) { 365 /* 366 * We must listen to a range of multicast addresses. 367 * For now, just accept all multicasts, rather than 368 * trying to set only those filter bits needed to match 369 * the range. (At this time, the only use of address 370 * ranges is for IP multicast routing, for which the 371 * range is big enough to require all bits set.) 372 */ 373 ETHER_UNLOCK(ec); 374 goto allmulti; 375 } 376 377 crc = ether_crc32_le(enm->enm_addrlo, ETHER_ADDR_LEN); 378 379 /* Just want the 6 most significant bits. */ 380 crc >>= 26; 381 382 /* Set the corresponding bit in the filter. */ 383 af[crc >> 4] |= 1 << (crc & 0xf); 384 385 ETHER_NEXT_MULTI(step, enm); 386 } 387 ETHER_UNLOCK(ec); 388 ifp->if_flags &= ~IFF_ALLMULTI; 389 return; 390 391 allmulti: 392 ifp->if_flags |= IFF_ALLMULTI; 393 af[0] = af[1] = af[2] = af[3] = 0xffff; 394 } 395 396 int 397 qtinit(struct ifnet *ifp) 398 { 399 struct qt_softc *sc = ifp->if_softc; 400 struct qt_init *iniblk; 401 struct ifrw *ifrw; 402 struct ifxmt *ifxp; 403 struct qt_rring *rp; 404 struct qt_tring *tp; 405 int i, error; 406 407 if (ifp->if_flags & IFF_RUNNING) { 408 /* Cancel any pending I/O. */ 409 qtstop(ifp, 0); 410 } 411 412 if (sc->sc_ib == NULL) { 413 if (if_ubaminit(&sc->sc_ifuba, sc->sc_uh, 414 MCLBYTES, sc->sc_ifr, NRCV, sc->sc_ifw, NXMT)) { 415 printf("%s: can't initialize\n", device_xname(sc->sc_dev)); 416 ifp->if_flags &= ~IFF_UP; 417 return 0; 418 } 419 sc->sc_ui.ui_size = sizeof(struct qt_cdata); 420 if ((error = ubmemalloc(sc->sc_uh, &sc->sc_ui, 0))) { 421 printf(": failed ubmemalloc(), error = %d\n", error); 422 return error; 423 } 424 sc->sc_ib = (struct qt_cdata *)sc->sc_ui.ui_vaddr; 425 sc->sc_pib = (struct qt_cdata *)sc->sc_ui.ui_baddr; 426 427 /* 428 * Fill in most of the INIT block: vector, options (interrupt enable), ring 429 * locations. The physical address is copied from the ROMs as part of the 430 * -YM testing procedure. The CSR is saved here rather than in qtinit() 431 * because the qtturbo() routine needs it. 432 * 433 * The INIT block must be quadword aligned. Using malloc() guarantees click 434 * (64 byte) alignment. Since the only time the INIT block is referenced is 435 * at 'startup' or 'reset' time there is really no time penalty (and a modest 436 * D space savings) involved. 437 */ 438 memset(sc->sc_ib, 0, sizeof(struct qt_cdata)); 439 iniblk = &sc->sc_ib->qc_init; 440 441 iniblk->vector = sc->vector; 442 memcpy(iniblk->paddr, sc->is_addr, 6); 443 444 iniblk->options = INIT_OPTIONS_INT; 445 iniblk->rx_lo = loint(&sc->sc_pib->qc_r); 446 iniblk->rx_hi = hiint(&sc->sc_pib->qc_r); 447 iniblk->tx_lo = loint(&sc->sc_pib->qc_t); 448 iniblk->tx_hi = hiint(&sc->sc_pib->qc_t); 449 } 450 iniblk = &sc->sc_ib->qc_init; 451 iniblk->mode = ifp->if_flags & IFF_PROMISC ? INIT_MODE_PRO : 0; 452 /* 453 * The multicast filter works "like LANCE". 454 */ 455 lance_setladrf(&sc->is_ec, iniblk->laddr); 456 457 /* 458 * Now initialize the receive ring descriptors. Because this routine can be 459 * called with outstanding I/O operations we check the ring descriptors for 460 * a non-zero 'rhost0' (or 'thost0') word and place those buffers back on 461 * the free list. 462 */ 463 for (i = 0; i < NRCV; i++) { 464 rp = &sc->sc_ib->qc_r[i]; 465 ifrw = &sc->sc_ifr[i]; 466 rp->rmd1 = MCLBYTES; 467 rp->rmd4 = loint(ifrw->ifrw_info); 468 rp->rmd5 = hiint(ifrw->ifrw_info); 469 rp->rmd3 = 0; /* clear RMD3_OWN */ 470 } 471 for (i = 0; i < NXMT; i++) { 472 tp = &sc->sc_ib->qc_t[i]; 473 ifxp = &sc->sc_ifw[i]; 474 tp->tmd4 = loint(ifxp->ifw_info); 475 tp->tmd5 = hiint(ifxp->ifw_info); 476 tp->tmd3 = TMD3_OWN; 477 } 478 479 sc->xnext = sc->xlast = sc->nxmit = 0; 480 sc->rindex = 0; 481 sc->nxtrcv = 0; 482 sc->nrcv = 0; 483 484 /* 485 * Now we tell the device the address of the INIT block. The device 486 * _must_ be in the Turbo mode at this time. The "START" command is 487 * then issued to the device. A 1 second timeout is then started. 488 * When the interrupt occurs the IFF_UP|IFF_RUNNING state is entered and 489 * full operations will proceed. If the timeout expires without an interrupt 490 * being received an error is printed, the flags cleared and the device left 491 * marked down. 492 */ 493 QT_WCSR(CSR_IBAL, loint(&sc->sc_pib->qc_init)); 494 QT_WCSR(CSR_IBAH, hiint(&sc->sc_pib->qc_init)); 495 QT_WCSR(CSR_SRQR, 2); 496 497 sc->is_if.if_flags |= IFF_RUNNING; 498 return 0; 499 } 500 501 /* 502 * Start output on interface. 503 */ 504 505 void 506 qtstart(struct ifnet *ifp) 507 { 508 int len, nxmit; 509 struct qt_softc *sc = ifp->if_softc; 510 struct qt_tring *rp; 511 struct mbuf *m = NULL; 512 513 for (nxmit = sc->nxmit; nxmit < NXMT; nxmit++) { 514 IF_DEQUEUE(&sc->is_if.if_snd, m); 515 if (m == 0) 516 break; 517 518 rp = &sc->sc_ib->qc_t[sc->xnext]; 519 if ((rp->tmd3 & TMD3_OWN) == 0) 520 panic("qtstart"); 521 522 bpf_mtap(ifp, m, BPF_D_OUT); 523 524 len = if_ubaput(&sc->sc_ifuba, &sc->sc_ifw[sc->xnext], m); 525 if (len < MINPACKETSIZE) 526 len = MINPACKETSIZE; 527 rp->tmd3 = len & TMD3_BCT; /* set length,clear ownership */ 528 QT_WCSR(CSR_ARQR, ARQR_TRQ); /* tell device it has buffer */ 529 530 if (++sc->xnext >= NXMT) 531 sc->xnext = 0; 532 } 533 if (sc->nxmit != nxmit) 534 sc->nxmit = nxmit; 535 /* XXX - set OACTIVE */ 536 } 537 538 /* 539 * General interrupt service routine. Receive, transmit, device start 540 * interrupts and timeouts come here. Check for hard device errors and print a 541 * message if any errors are found. If we are waiting for the device to 542 * START then check if the device is now running. 543 */ 544 545 void 546 qtintr(void *arg) 547 { 548 struct qt_softc *sc = arg; 549 struct ifnet *ifp = &sc->is_if; 550 short status; 551 552 553 status = QT_RCSR(CSR_SRR); 554 if (status < 0) 555 /* should we reset the device after a bunch of these errs? */ 556 qtsrr(sc, status); 557 if ((ifp->if_flags & IFF_UP) == 0) 558 return; /* Unwanted interrupt */ 559 qtrint(sc); 560 qttint(sc); 561 qtstart(&sc->is_ec.ec_if); 562 } 563 564 /* 565 * Transmit interrupt service. Only called if there are outstanding transmit 566 * requests which could have completed. The DELQA-YM doesn't provide the 567 * status bits telling the kind (receive, transmit) of interrupt. 568 */ 569 570 #define BBLMIS (TMD2_BBL|TMD2_MIS) 571 572 void 573 qttint(struct qt_softc *sc) 574 { 575 struct qt_tring *rp; 576 577 while (sc->nxmit > 0) { 578 rp = &sc->sc_ib->qc_t[sc->xlast]; 579 if ((rp->tmd3 & TMD3_OWN) == 0) 580 break; 581 if_statinc(&sc->is_if, if_opackets); 582 /* 583 * Collisions don't count as output errors, but babbling and missing packets 584 * do count as output errors. 585 */ 586 if (rp->tmd2 & TMD2_CER) 587 if_statinc(&sc->is_if, if_collisions); 588 if ((rp->tmd0 & TMD0_ERR1) || 589 ((rp->tmd2 & TMD2_ERR2) && (rp->tmd2 & BBLMIS))) { 590 #ifdef QTDEBUG 591 char buf[100]; 592 snprintb(buf, sizeof(buf), TMD2_BITS, rp->tmd2); 593 printf("%s: tmd2 %s\n", device_xname(sc->sc_dev), buf); 594 #endif 595 if_statinc(&sc->is_if, if_oerrors); 596 } 597 if_ubaend(&sc->sc_ifuba, &sc->sc_ifw[sc->xlast]); 598 if (++sc->xlast >= NXMT) 599 sc->xlast = 0; 600 sc->nxmit--; 601 } 602 } 603 604 /* 605 * Receive interrupt service. Pull packet off the interface and put into 606 * a mbuf chain for processing later. 607 */ 608 609 void 610 qtrint(struct qt_softc *sc) 611 { 612 struct qt_rring *rp; 613 struct ifnet *ifp = &sc->is_ec.ec_if; 614 struct mbuf *m; 615 int len; 616 617 while (sc->sc_ib->qc_r[(int)sc->rindex].rmd3 & RMD3_OWN) 618 { 619 rp = &sc->sc_ib->qc_r[(int)sc->rindex]; 620 if ((rp->rmd0 & (RMD0_STP|RMD0_ENP)) != (RMD0_STP|RMD0_ENP)) { 621 printf("%s: chained packet\n", device_xname(sc->sc_dev)); 622 if_statinc(&sc->is_if, if_ierrors); 623 goto rnext; 624 } 625 len = (rp->rmd1 & RMD1_MCNT) - 4; /* -4 for CRC */ 626 627 if ((rp->rmd0 & RMD0_ERR3) || (rp->rmd2 & RMD2_ERR4)) { 628 #ifdef QTDEBUG 629 char buf[100]; 630 snprintb(buf, sizeof(buf), RMD0_BITS, rp->rmd0); 631 printf("%s: rmd0 %s\n", device_xname(sc->sc_dev), buf); 632 snprintb(buf, sizeof(buf), RMD2_BITS, rp->rmd2); 633 printf("%s: rmd2 %s\n", device_xname(sc->sc_dev), buf); 634 #endif 635 if_statinc(&sc->is_if, if_ierrors); 636 goto rnext; 637 } 638 m = if_ubaget(&sc->sc_ifuba, &sc->sc_ifr[(int)sc->rindex], 639 ifp, len); 640 if (m == 0) { 641 if_statinc(&sc->is_if, if_ierrors); 642 goto rnext; 643 } 644 if_percpuq_enqueue(ifp->if_percpuq, m); 645 rnext: 646 --sc->nrcv; 647 rp->rmd3 = 0; 648 rp->rmd1 = MCLBYTES; 649 if (++sc->rindex >= NRCV) 650 sc->rindex = 0; 651 } 652 QT_WCSR(CSR_ARQR, ARQR_RRQ); /* tell device it has buffer */ 653 } 654 655 int 656 qtioctl(struct ifnet *ifp, u_long cmd, void *data) 657 { 658 int s, error; 659 660 s = splnet(); 661 662 error = ether_ioctl(ifp, cmd, data); 663 if (error == ENETRESET) { 664 if (ifp->if_flags & IFF_RUNNING) 665 error = qtinit(ifp); 666 else 667 error = 0; 668 } 669 splx(s); 670 return (error); 671 } 672 673 void 674 qtsrr(struct qt_softc *sc, int srrbits) 675 { 676 char buf[100]; 677 snprintb(buf, sizeof(buf), SRR_BITS, srrbits); 678 printf("%s: srr=%s\n", device_xname(sc->sc_dev), buf); 679 } 680 681 /* 682 * Stop activity on the interface. 683 * Lose outstanding transmit requests. XXX - not good for multicast. 684 */ 685 void 686 qtstop(struct ifnet *ifp, int disable) 687 { 688 struct qt_softc *sc = ifp->if_softc; 689 int i; 690 691 QT_WCSR(CSR_SRQR, 3); 692 for (i = 0; i < 100; i++) 693 if ((QT_RCSR(CSR_SRR) & SRR_RESP) == 3) 694 break; 695 if (QT_RCSR(CSR_SRR) & SRR_FES) 696 qtsrr(sc, QT_RCSR(CSR_SRR)); 697 /* Forget already queued transmit requests */ 698 while (sc->nxmit > 0) { 699 if_ubaend(&sc->sc_ifuba, &sc->sc_ifw[sc->xlast]); 700 if (++sc->xlast >= NXMT) 701 sc->xlast = 0; 702 sc->nxmit--; 703 } 704 /* Handle late received packets */ 705 qtrint(sc); 706 ifp->if_flags &= ~IFF_RUNNING; 707 } 708 709 #ifdef notyet 710 /* 711 * Reset the device. This moves it from DELQA-T mode to DELQA-Normal mode. 712 * After the reset put the device back in -T mode. Then call qtinit() to 713 * reinitialize the ring structures and issue the 'timeout' for the "device 714 * started interrupt". 715 */ 716 717 void 718 qtreset(sc) 719 struct qt_softc *sc; 720 { 721 722 qtturbo(sc); 723 qtinit(&sc->is_ec.ec_if); 724 } 725 #endif 726