xref: /netbsd-src/sys/dev/pci/pciide.c (revision 3b435a73967be44dfb4a27315acd72bfacde430c)
1 /*	$NetBSD: pciide.c,v 1.45 1999/10/25 14:13:12 bouyer Exp $	*/
2 
3 
4 /*
5  * Copyright (c) 1999 Manuel Bouyer.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. All advertising materials mentioning features or use of this software
16  *    must display the following acknowledgement:
17  *	This product includes software developed by the University of
18  *	California, Berkeley and its contributors.
19  * 4. Neither the name of the University nor the names of its contributors
20  *    may be used to endorse or promote products derived from this software
21  *    without specific prior written permission.
22  *
23  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
24  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
27  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33  * SUCH DAMAGE.
34  *
35  */
36 
37 
38 /*
39  * Copyright (c) 1996, 1998 Christopher G. Demetriou.  All rights reserved.
40  *
41  * Redistribution and use in source and binary forms, with or without
42  * modification, are permitted provided that the following conditions
43  * are met:
44  * 1. Redistributions of source code must retain the above copyright
45  *    notice, this list of conditions and the following disclaimer.
46  * 2. Redistributions in binary form must reproduce the above copyright
47  *    notice, this list of conditions and the following disclaimer in the
48  *    documentation and/or other materials provided with the distribution.
49  * 3. All advertising materials mentioning features or use of this software
50  *    must display the following acknowledgement:
51  *      This product includes software developed by Christopher G. Demetriou
52  *	for the NetBSD Project.
53  * 4. The name of the author may not be used to endorse or promote products
54  *    derived from this software without specific prior written permission
55  *
56  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
57  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
58  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
59  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
60  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
61  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
62  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
63  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
64  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
65  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
66  */
67 
68 /*
69  * PCI IDE controller driver.
70  *
71  * Author: Christopher G. Demetriou, March 2, 1998 (derived from NetBSD
72  * sys/dev/pci/ppb.c, revision 1.16).
73  *
74  * See "PCI IDE Controller Specification, Revision 1.0 3/4/94" and
75  * "Programming Interface for Bus Master IDE Controller, Revision 1.0
76  * 5/16/94" from the PCI SIG.
77  *
78  */
79 
80 #ifndef WDCDEBUG
81 #define WDCDEBUG
82 #endif
83 
84 #define DEBUG_DMA   0x01
85 #define DEBUG_XFERS  0x02
86 #define DEBUG_FUNCS  0x08
87 #define DEBUG_PROBE  0x10
88 #ifdef WDCDEBUG
89 int wdcdebug_pciide_mask = 0;
90 #define WDCDEBUG_PRINT(args, level) \
91 	if (wdcdebug_pciide_mask & (level)) printf args
92 #else
93 #define WDCDEBUG_PRINT(args, level)
94 #endif
95 #include <sys/param.h>
96 #include <sys/systm.h>
97 #include <sys/device.h>
98 #include <sys/malloc.h>
99 
100 #include <vm/vm.h>
101 #include <vm/vm_param.h>
102 #include <vm/vm_kern.h>
103 
104 #include <dev/pci/pcireg.h>
105 #include <dev/pci/pcivar.h>
106 #include <dev/pci/pcidevs.h>
107 #include <dev/pci/pciidereg.h>
108 #include <dev/pci/pciidevar.h>
109 #include <dev/pci/pciide_piix_reg.h>
110 #include <dev/pci/pciide_apollo_reg.h>
111 #include <dev/pci/pciide_cmd_reg.h>
112 #include <dev/pci/pciide_cy693_reg.h>
113 #include <dev/pci/pciide_sis_reg.h>
114 #include <dev/pci/pciide_acer_reg.h>
115 #include <dev/pci/pciide_pdc202xx_reg.h>
116 #include <dev/ata/atavar.h>
117 #include <dev/ic/wdcreg.h>
118 #include <dev/ic/wdcvar.h>
119 
120 #if BYTE_ORDER == BIG_ENDIAN
121 #include <machine/bswap.h>
122 #define	htopci(x)	bswap32(x)
123 #define	pcitoh(x)	bswap32(x)
124 #else
125 #define	htopci(x)	(x)
126 #define	pcitoh(x)	(x)
127 #endif
128 
129 /* inlines for reading/writing 8-bit PCI registers */
130 static __inline u_int8_t pciide_pci_read __P((pci_chipset_tag_t, pcitag_t,
131 					      int));
132 static __inline void pciide_pci_write __P((pci_chipset_tag_t, pcitag_t,
133 					   int, u_int8_t));
134 
135 static __inline u_int8_t
136 pciide_pci_read(pc, pa, reg)
137 	pci_chipset_tag_t pc;
138 	pcitag_t pa;
139 	int reg;
140 {
141 
142 	return (pci_conf_read(pc, pa, (reg & ~0x03)) >>
143 	    ((reg & 0x03) * 8) & 0xff);
144 }
145 
146 static __inline void
147 pciide_pci_write(pc, pa, reg, val)
148 	pci_chipset_tag_t pc;
149 	pcitag_t pa;
150 	int reg;
151 	u_int8_t val;
152 {
153 	pcireg_t pcival;
154 
155 	pcival = pci_conf_read(pc, pa, (reg & ~0x03));
156 	pcival &= ~(0xff << ((reg & 0x03) * 8));
157 	pcival |= (val << ((reg & 0x03) * 8));
158 	pci_conf_write(pc, pa, (reg & ~0x03), pcival);
159 }
160 
161 struct pciide_softc {
162 	struct wdc_softc	sc_wdcdev;	/* common wdc definitions */
163 	pci_chipset_tag_t	sc_pc;		/* PCI registers info */
164 	pcitag_t		sc_tag;
165 	void			*sc_pci_ih;	/* PCI interrupt handle */
166 	int			sc_dma_ok;	/* bus-master DMA info */
167 	bus_space_tag_t		sc_dma_iot;
168 	bus_space_handle_t	sc_dma_ioh;
169 	bus_dma_tag_t		sc_dmat;
170 	/* Chip description */
171 	const struct pciide_product_desc *sc_pp;
172 	/* common definitions */
173 	struct channel_softc *wdc_chanarray[PCIIDE_NUM_CHANNELS];
174 	/* internal bookkeeping */
175 	struct pciide_channel {			/* per-channel data */
176 		struct channel_softc wdc_channel; /* generic part */
177 		char		*name;
178 		int		hw_ok;		/* hardware mapped & OK? */
179 		int		compat;		/* is it compat? */
180 		void		*ih;		/* compat or pci handle */
181 		/* DMA tables and DMA map for xfer, for each drive */
182 		struct pciide_dma_maps {
183 			bus_dmamap_t    dmamap_table;
184 			struct idedma_table *dma_table;
185 			bus_dmamap_t    dmamap_xfer;
186 		} dma_maps[2];
187 	} pciide_channels[PCIIDE_NUM_CHANNELS];
188 };
189 
190 void default_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
191 
192 void piix_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
193 void piix_setup_channel __P((struct channel_softc*));
194 void piix3_4_setup_channel __P((struct channel_softc*));
195 static u_int32_t piix_setup_idetim_timings __P((u_int8_t, u_int8_t, u_int8_t));
196 static u_int32_t piix_setup_idetim_drvs __P((struct ata_drive_datas*));
197 static u_int32_t piix_setup_sidetim_timings __P((u_int8_t, u_int8_t, u_int8_t));
198 
199 void apollo_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
200 void apollo_setup_channel __P((struct channel_softc*));
201 
202 void cmd_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
203 void cmd0643_6_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
204 void cmd0643_6_setup_channel __P((struct channel_softc*));
205 void cmd_channel_map __P((struct pci_attach_args *,
206 			struct pciide_softc *, int));
207 int  cmd_pci_intr __P((void *));
208 
209 void cy693_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
210 void cy693_setup_channel __P((struct channel_softc*));
211 
212 void sis_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
213 void sis_setup_channel __P((struct channel_softc*));
214 
215 void acer_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
216 void acer_setup_channel __P((struct channel_softc*));
217 int  acer_pci_intr __P((void *));
218 
219 void pdc202xx_chip_map __P((struct pciide_softc*, struct pci_attach_args*));
220 void pdc202xx_setup_channel __P((struct channel_softc*));
221 int  pdc202xx_pci_intr __P((void *));
222 
223 void pciide_channel_dma_setup __P((struct pciide_channel *));
224 int  pciide_dma_table_setup __P((struct pciide_softc*, int, int));
225 int  pciide_dma_init __P((void*, int, int, void *, size_t, int));
226 void pciide_dma_start __P((void*, int, int, int));
227 int  pciide_dma_finish __P((void*, int, int, int));
228 void pciide_print_modes __P((struct pciide_channel *));
229 
230 struct pciide_product_desc {
231 	u_int32_t ide_product;
232 	int ide_flags;
233 	const char *ide_name;
234 	/* map and setup chip, probe drives */
235 	void (*chip_map) __P((struct pciide_softc*, struct pci_attach_args*));
236 };
237 
238 /* Flags for ide_flags */
239 #define IDE_PCI_CLASS_OVERRIDE 0x0001 /* accept even if class != pciide */
240 
241 /* Default product description for devices not known from this controller */
242 const struct pciide_product_desc default_product_desc = {
243 	0,
244 	0,
245 	"Generic PCI IDE controller",
246 	default_chip_map,
247 };
248 
249 const struct pciide_product_desc pciide_intel_products[] =  {
250 	{ PCI_PRODUCT_INTEL_82092AA,
251 	  0,
252 	  "Intel 82092AA IDE controller",
253 	  default_chip_map,
254 	},
255 	{ PCI_PRODUCT_INTEL_82371FB_IDE,
256 	  0,
257 	  "Intel 82371FB IDE controller (PIIX)",
258 	  piix_chip_map,
259 	},
260 	{ PCI_PRODUCT_INTEL_82371SB_IDE,
261 	  0,
262 	  "Intel 82371SB IDE Interface (PIIX3)",
263 	  piix_chip_map,
264 	},
265 	{ PCI_PRODUCT_INTEL_82371AB_IDE,
266 	  0,
267 	  "Intel 82371AB IDE controller (PIIX4)",
268 	  piix_chip_map,
269 	},
270 	{ PCI_PRODUCT_INTEL_82801AA_IDE,
271 	  0,
272 	  "Intel 82801AA IDE Controller (ICH)",
273 	  piix_chip_map,
274 	},
275 	{ PCI_PRODUCT_INTEL_82801AB_IDE,
276 	  0,
277 	  "Intel 82801AB IDE Controller (ICH0)",
278 	  piix_chip_map,
279 	},
280 	{ 0,
281 	  0,
282 	  NULL,
283 	}
284 };
285 
286 const struct pciide_product_desc pciide_cmd_products[] =  {
287 	{ PCI_PRODUCT_CMDTECH_640,
288 	  0,
289 	  "CMD Technology PCI0640",
290 	  cmd_chip_map
291 	},
292 	{ PCI_PRODUCT_CMDTECH_643,
293 	  0,
294 	  "CMD Technology PCI0643",
295 	  cmd0643_6_chip_map,
296 	},
297 	{ PCI_PRODUCT_CMDTECH_646,
298 	  0,
299 	  "CMD Technology PCI0646",
300 	  cmd0643_6_chip_map,
301 	},
302 	{ 0,
303 	  0,
304 	  NULL,
305 	}
306 };
307 
308 const struct pciide_product_desc pciide_via_products[] =  {
309 	{ PCI_PRODUCT_VIATECH_VT82C586_IDE,
310 	  0,
311 	  "VIA Technologies VT82C586 (Apollo VP) IDE Controller",
312 	  apollo_chip_map,
313 	 },
314 	{ PCI_PRODUCT_VIATECH_VT82C586A_IDE,
315 	  0,
316 	  "VIA Technologies VT82C586A IDE Controller",
317 	  apollo_chip_map,
318 	},
319 	{ 0,
320 	  0,
321 	  NULL,
322 	}
323 };
324 
325 const struct pciide_product_desc pciide_cypress_products[] =  {
326 	{ PCI_PRODUCT_CONTAQ_82C693,
327 	  0,
328 	  "Contaq Microsystems CY82C693 IDE Controller",
329 	  cy693_chip_map,
330 	},
331 	{ 0,
332 	  0,
333 	  NULL,
334 	}
335 };
336 
337 const struct pciide_product_desc pciide_sis_products[] =  {
338 	{ PCI_PRODUCT_SIS_5597_IDE,
339 	  0,
340 	  "Silicon Integrated System 5597/5598 IDE controller",
341 	  sis_chip_map,
342 	},
343 	{ 0,
344 	  0,
345 	  NULL,
346 	}
347 };
348 
349 const struct pciide_product_desc pciide_acer_products[] =  {
350 	{ PCI_PRODUCT_ALI_M5229,
351 	  0,
352 	  "Acer Labs M5229 UDMA IDE Controller",
353 	  acer_chip_map,
354 	},
355 	{ 0,
356 	  0,
357 	  NULL,
358 	}
359 };
360 
361 const struct pciide_product_desc pciide_promise_products[] =  {
362 	{ PCI_PRODUCT_PROMISE_ULTRA33,
363 	  IDE_PCI_CLASS_OVERRIDE,
364 	  "Promise Ultra33/ATA Bus Master IDE Accelerator",
365 	  pdc202xx_chip_map,
366 	},
367 	{ PCI_PRODUCT_PROMISE_ULTRA66,
368 	  IDE_PCI_CLASS_OVERRIDE,
369 	  "Promise Ultra66/ATA Bus Master IDE Accelerator",
370 	  pdc202xx_chip_map,
371 	},
372 	{ 0,
373 	  0,
374 	  NULL,
375 	}
376 };
377 
378 struct pciide_vendor_desc {
379 	u_int32_t ide_vendor;
380 	const struct pciide_product_desc *ide_products;
381 };
382 
383 const struct pciide_vendor_desc pciide_vendors[] = {
384 	{ PCI_VENDOR_INTEL, pciide_intel_products },
385 	{ PCI_VENDOR_CMDTECH, pciide_cmd_products },
386 	{ PCI_VENDOR_VIATECH, pciide_via_products },
387 	{ PCI_VENDOR_CONTAQ, pciide_cypress_products },
388 	{ PCI_VENDOR_SIS, pciide_sis_products },
389 	{ PCI_VENDOR_ALI, pciide_acer_products },
390 	{ PCI_VENDOR_PROMISE, pciide_promise_products },
391 	{ 0, NULL }
392 };
393 
394 #define	PCIIDE_CHANNEL_NAME(chan)	((chan) == 0 ? "primary" : "secondary")
395 
396 /* options passed via the 'flags' config keyword */
397 #define PCIIDE_OPTIONS_DMA	0x01
398 
399 int	pciide_match __P((struct device *, struct cfdata *, void *));
400 void	pciide_attach __P((struct device *, struct device *, void *));
401 
402 struct cfattach pciide_ca = {
403 	sizeof(struct pciide_softc), pciide_match, pciide_attach
404 };
405 int	pciide_chipen __P((struct pciide_softc *, struct pci_attach_args *));
406 int	pciide_mapregs_compat __P(( struct pci_attach_args *,
407 	    struct pciide_channel *, int, bus_size_t *, bus_size_t*));
408 int	pciide_mapregs_native __P((struct pci_attach_args *,
409 	    struct pciide_channel *, bus_size_t *, bus_size_t *,
410 	    int (*pci_intr) __P((void *))));
411 void	pciide_mapreg_dma __P((struct pciide_softc *,
412 	    struct pci_attach_args *));
413 int	pciide_chansetup __P((struct pciide_softc *, int, pcireg_t));
414 void	pciide_mapchan __P((struct pci_attach_args *,
415 	    struct pciide_channel *, pcireg_t, bus_size_t *, bus_size_t *,
416 	    int (*pci_intr) __P((void *))));
417 int	pciiide_chan_candisable __P((struct pciide_channel *));
418 void	pciide_map_compat_intr __P(( struct pci_attach_args *,
419 	    struct pciide_channel *, int, int));
420 int	pciide_print __P((void *, const char *pnp));
421 int	pciide_compat_intr __P((void *));
422 int	pciide_pci_intr __P((void *));
423 const struct pciide_product_desc* pciide_lookup_product __P((u_int32_t));
424 
425 const struct pciide_product_desc *
426 pciide_lookup_product(id)
427 	u_int32_t id;
428 {
429 	const struct pciide_product_desc *pp;
430 	const struct pciide_vendor_desc *vp;
431 
432 	for (vp = pciide_vendors; vp->ide_products != NULL; vp++)
433 		if (PCI_VENDOR(id) == vp->ide_vendor)
434 			break;
435 
436 	if ((pp = vp->ide_products) == NULL)
437 		return NULL;
438 
439 	for (; pp->ide_name != NULL; pp++)
440 		if (PCI_PRODUCT(id) == pp->ide_product)
441 			break;
442 
443 	if (pp->ide_name == NULL)
444 		return NULL;
445 	return pp;
446 }
447 
448 int
449 pciide_match(parent, match, aux)
450 	struct device *parent;
451 	struct cfdata *match;
452 	void *aux;
453 {
454 	struct pci_attach_args *pa = aux;
455 	const struct pciide_product_desc *pp;
456 
457 	/*
458 	 * Check the ID register to see that it's a PCI IDE controller.
459 	 * If it is, we assume that we can deal with it; it _should_
460 	 * work in a standardized way...
461 	 */
462 	if (PCI_CLASS(pa->pa_class) == PCI_CLASS_MASS_STORAGE &&
463 	    PCI_SUBCLASS(pa->pa_class) == PCI_SUBCLASS_MASS_STORAGE_IDE) {
464 		return (1);
465 	}
466 
467 	/*
468 	 * Some controllers (e.g. promise Utra-33) don't claim to be PCI IDE
469 	 * controllers. Let see if we can deal with it anyway.
470 	 */
471 	pp = pciide_lookup_product(pa->pa_id);
472 	if (pp  && (pp->ide_flags & IDE_PCI_CLASS_OVERRIDE)) {
473 		return (1);
474 	}
475 
476 	return (0);
477 }
478 
479 void
480 pciide_attach(parent, self, aux)
481 	struct device *parent, *self;
482 	void *aux;
483 {
484 	struct pci_attach_args *pa = aux;
485 	pci_chipset_tag_t pc = pa->pa_pc;
486 	pcitag_t tag = pa->pa_tag;
487 	struct pciide_softc *sc = (struct pciide_softc *)self;
488 	pcireg_t csr;
489 	char devinfo[256];
490 
491 	sc->sc_pp = pciide_lookup_product(pa->pa_id);
492 	if (sc->sc_pp == NULL) {
493 		sc->sc_pp = &default_product_desc;
494 		pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo);
495 		printf(": %s (rev. 0x%02x)\n", devinfo,
496 		    PCI_REVISION(pa->pa_class));
497 	} else {
498 		printf(": %s\n", sc->sc_pp->ide_name);
499 	}
500 	sc->sc_pc = pa->pa_pc;
501 	sc->sc_tag = pa->pa_tag;
502 #ifdef WDCDEBUG
503 	if (wdcdebug_pciide_mask & DEBUG_PROBE)
504 		pci_conf_print(sc->sc_pc, sc->sc_tag, NULL);
505 #endif
506 
507 	sc->sc_pp->chip_map(sc, pa);
508 
509 	if (sc->sc_dma_ok) {
510 		csr = pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG);
511 		csr |= PCI_COMMAND_MASTER_ENABLE;
512 		pci_conf_write(pc, tag, PCI_COMMAND_STATUS_REG, csr);
513 	}
514 	WDCDEBUG_PRINT(("pciide: command/status register=%x\n",
515 	    pci_conf_read(pc, tag, PCI_COMMAND_STATUS_REG)), DEBUG_PROBE);
516 }
517 
518 /* tell wether the chip is enabled or not */
519 int
520 pciide_chipen(sc, pa)
521 	struct pciide_softc *sc;
522 	struct pci_attach_args *pa;
523 {
524 	pcireg_t csr;
525 	if ((pa->pa_flags & PCI_FLAGS_IO_ENABLED) == 0) {
526 		csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
527 		    PCI_COMMAND_STATUS_REG);
528 		printf("%s: device disabled (at %s)\n",
529 	 	   sc->sc_wdcdev.sc_dev.dv_xname,
530 	  	  (csr & PCI_COMMAND_IO_ENABLE) == 0 ?
531 		  "device" : "bridge");
532 		return 0;
533 	}
534 	return 1;
535 }
536 
537 int
538 pciide_mapregs_compat(pa, cp, compatchan, cmdsizep, ctlsizep)
539 	struct pci_attach_args *pa;
540 	struct pciide_channel *cp;
541 	int compatchan;
542 	bus_size_t *cmdsizep, *ctlsizep;
543 {
544 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
545 	struct channel_softc *wdc_cp = &cp->wdc_channel;
546 
547 	cp->compat = 1;
548 	*cmdsizep = PCIIDE_COMPAT_CMD_SIZE;
549 	*ctlsizep = PCIIDE_COMPAT_CTL_SIZE;
550 
551 	wdc_cp->cmd_iot = pa->pa_iot;
552 	if (bus_space_map(wdc_cp->cmd_iot, PCIIDE_COMPAT_CMD_BASE(compatchan),
553 	    PCIIDE_COMPAT_CMD_SIZE, 0, &wdc_cp->cmd_ioh) != 0) {
554 		printf("%s: couldn't map %s channel cmd regs\n",
555 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
556 		return (0);
557 	}
558 
559 	wdc_cp->ctl_iot = pa->pa_iot;
560 	if (bus_space_map(wdc_cp->ctl_iot, PCIIDE_COMPAT_CTL_BASE(compatchan),
561 	    PCIIDE_COMPAT_CTL_SIZE, 0, &wdc_cp->ctl_ioh) != 0) {
562 		printf("%s: couldn't map %s channel ctl regs\n",
563 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
564 		bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh,
565 		    PCIIDE_COMPAT_CMD_SIZE);
566 		return (0);
567 	}
568 
569 	return (1);
570 }
571 
572 int
573 pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep, pci_intr)
574 	struct pci_attach_args * pa;
575 	struct pciide_channel *cp;
576 	bus_size_t *cmdsizep, *ctlsizep;
577 	int (*pci_intr) __P((void *));
578 {
579 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
580 	struct channel_softc *wdc_cp = &cp->wdc_channel;
581 	const char *intrstr;
582 	pci_intr_handle_t intrhandle;
583 
584 	cp->compat = 0;
585 
586 	if (sc->sc_pci_ih == NULL) {
587 		if (pci_intr_map(pa->pa_pc, pa->pa_intrtag, pa->pa_intrpin,
588 		    pa->pa_intrline, &intrhandle) != 0) {
589 			printf("%s: couldn't map native-PCI interrupt\n",
590 			    sc->sc_wdcdev.sc_dev.dv_xname);
591 			return 0;
592 		}
593 		intrstr = pci_intr_string(pa->pa_pc, intrhandle);
594 		sc->sc_pci_ih = pci_intr_establish(pa->pa_pc,
595 		    intrhandle, IPL_BIO, pci_intr, sc);
596 		if (sc->sc_pci_ih != NULL) {
597 			printf("%s: using %s for native-PCI interrupt\n",
598 			    sc->sc_wdcdev.sc_dev.dv_xname,
599 			    intrstr ? intrstr : "unknown interrupt");
600 		} else {
601 			printf("%s: couldn't establish native-PCI interrupt",
602 			    sc->sc_wdcdev.sc_dev.dv_xname);
603 			if (intrstr != NULL)
604 				printf(" at %s", intrstr);
605 			printf("\n");
606 			return 0;
607 		}
608 	}
609 	cp->ih = sc->sc_pci_ih;
610 	if (pci_mapreg_map(pa, PCIIDE_REG_CMD_BASE(wdc_cp->channel),
611 	    PCI_MAPREG_TYPE_IO, 0,
612 	    &wdc_cp->cmd_iot, &wdc_cp->cmd_ioh, NULL, cmdsizep) != 0) {
613 		printf("%s: couldn't map %s channel cmd regs\n",
614 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
615 		return 0;
616 	}
617 
618 	if (pci_mapreg_map(pa, PCIIDE_REG_CTL_BASE(wdc_cp->channel),
619 	    PCI_MAPREG_TYPE_IO, 0,
620 	    &wdc_cp->ctl_iot, &wdc_cp->ctl_ioh, NULL, ctlsizep) != 0) {
621 		printf("%s: couldn't map %s channel ctl regs\n",
622 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
623 		bus_space_unmap(wdc_cp->cmd_iot, wdc_cp->cmd_ioh, *cmdsizep);
624 		return 0;
625 	}
626 	return (1);
627 }
628 
629 void
630 pciide_mapreg_dma(sc, pa)
631 	struct pciide_softc *sc;
632 	struct pci_attach_args *pa;
633 {
634 	/*
635 	 * Map DMA registers
636 	 *
637 	 * Note that sc_dma_ok is the right variable to test to see if
638 	 * DMA can be done.  If the interface doesn't support DMA,
639 	 * sc_dma_ok will never be non-zero.  If the DMA regs couldn't
640 	 * be mapped, it'll be zero.  I.e., sc_dma_ok will only be
641 	 * non-zero if the interface supports DMA and the registers
642 	 * could be mapped.
643 	 *
644 	 * XXX Note that despite the fact that the Bus Master IDE specs
645 	 * XXX say that "The bus master IDE function uses 16 bytes of IO
646 	 * XXX space," some controllers (at least the United
647 	 * XXX Microelectronics UM8886BF) place it in memory space.
648 	 * XXX eventually, we should probably read the register and check
649 	 * XXX which type it is.  Either that or 'quirk' certain devices.
650 	 */
651 	sc->sc_dma_ok = (pci_mapreg_map(pa,
652 	    PCIIDE_REG_BUS_MASTER_DMA, PCI_MAPREG_TYPE_IO, 0,
653 	    &sc->sc_dma_iot, &sc->sc_dma_ioh, NULL, NULL) == 0);
654 	sc->sc_dmat = pa->pa_dmat;
655 	if (sc->sc_dma_ok == 0) {
656 		printf(", but unused (couldn't map registers)");
657 	} else {
658 		sc->sc_wdcdev.dma_arg = sc;
659 		sc->sc_wdcdev.dma_init = pciide_dma_init;
660 		sc->sc_wdcdev.dma_start = pciide_dma_start;
661 		sc->sc_wdcdev.dma_finish = pciide_dma_finish;
662 	}
663 }
664 int
665 pciide_compat_intr(arg)
666 	void *arg;
667 {
668 	struct pciide_channel *cp = arg;
669 
670 #ifdef DIAGNOSTIC
671 	/* should only be called for a compat channel */
672 	if (cp->compat == 0)
673 		panic("pciide compat intr called for non-compat chan %p\n", cp);
674 #endif
675 	return (wdcintr(&cp->wdc_channel));
676 }
677 
678 int
679 pciide_pci_intr(arg)
680 	void *arg;
681 {
682 	struct pciide_softc *sc = arg;
683 	struct pciide_channel *cp;
684 	struct channel_softc *wdc_cp;
685 	int i, rv, crv;
686 
687 	rv = 0;
688 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
689 		cp = &sc->pciide_channels[i];
690 		wdc_cp = &cp->wdc_channel;
691 
692 		/* If a compat channel skip. */
693 		if (cp->compat)
694 			continue;
695 		/* if this channel not waiting for intr, skip */
696 		if ((wdc_cp->ch_flags & WDCF_IRQ_WAIT) == 0)
697 			continue;
698 
699 		crv = wdcintr(wdc_cp);
700 		if (crv == 0)
701 			;		/* leave rv alone */
702 		else if (crv == 1)
703 			rv = 1;		/* claim the intr */
704 		else if (rv == 0)	/* crv should be -1 in this case */
705 			rv = crv;	/* if we've done no better, take it */
706 	}
707 	return (rv);
708 }
709 
710 void
711 pciide_channel_dma_setup(cp)
712 	struct pciide_channel *cp;
713 {
714 	int drive;
715 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
716 	struct ata_drive_datas *drvp;
717 
718 	for (drive = 0; drive < 2; drive++) {
719 		drvp = &cp->wdc_channel.ch_drive[drive];
720 		/* If no drive, skip */
721 		if ((drvp->drive_flags & DRIVE) == 0)
722 			continue;
723 		/* setup DMA if needed */
724 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
725 		    (drvp->drive_flags & DRIVE_UDMA) == 0) ||
726 		    sc->sc_dma_ok == 0) {
727 			drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
728 			continue;
729 		}
730 		if (pciide_dma_table_setup(sc, cp->wdc_channel.channel, drive)
731 		    != 0) {
732 			/* Abort DMA setup */
733 			drvp->drive_flags &= ~(DRIVE_DMA | DRIVE_UDMA);
734 			continue;
735 		}
736 	}
737 }
738 
739 int
740 pciide_dma_table_setup(sc, channel, drive)
741 	struct pciide_softc *sc;
742 	int channel, drive;
743 {
744 	bus_dma_segment_t seg;
745 	int error, rseg;
746 	const bus_size_t dma_table_size =
747 	    sizeof(struct idedma_table) * NIDEDMA_TABLES;
748 	struct pciide_dma_maps *dma_maps =
749 	    &sc->pciide_channels[channel].dma_maps[drive];
750 
751 	/* If table was already allocated, just return */
752 	if (dma_maps->dma_table)
753 		return 0;
754 
755 	/* Allocate memory for the DMA tables and map it */
756 	if ((error = bus_dmamem_alloc(sc->sc_dmat, dma_table_size,
757 	    IDEDMA_TBL_ALIGN, IDEDMA_TBL_ALIGN, &seg, 1, &rseg,
758 	    BUS_DMA_NOWAIT)) != 0) {
759 		printf("%s:%d: unable to allocate table DMA for "
760 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
761 		    channel, drive, error);
762 		return error;
763 	}
764 	if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg,
765 	    dma_table_size,
766 	    (caddr_t *)&dma_maps->dma_table,
767 	    BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
768 		printf("%s:%d: unable to map table DMA for"
769 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
770 		    channel, drive, error);
771 		return error;
772 	}
773 	WDCDEBUG_PRINT(("pciide_dma_table_setup: table at %p len %ld, "
774 	    "phy 0x%lx\n", dma_maps->dma_table, dma_table_size,
775 	    seg.ds_addr), DEBUG_PROBE);
776 
777 	/* Create and load table DMA map for this disk */
778 	if ((error = bus_dmamap_create(sc->sc_dmat, dma_table_size,
779 	    1, dma_table_size, IDEDMA_TBL_ALIGN, BUS_DMA_NOWAIT,
780 	    &dma_maps->dmamap_table)) != 0) {
781 		printf("%s:%d: unable to create table DMA map for "
782 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
783 		    channel, drive, error);
784 		return error;
785 	}
786 	if ((error = bus_dmamap_load(sc->sc_dmat,
787 	    dma_maps->dmamap_table,
788 	    dma_maps->dma_table,
789 	    dma_table_size, NULL, BUS_DMA_NOWAIT)) != 0) {
790 		printf("%s:%d: unable to load table DMA map for "
791 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
792 		    channel, drive, error);
793 		return error;
794 	}
795 	WDCDEBUG_PRINT(("pciide_dma_table_setup: phy addr of table 0x%lx\n",
796 	    dma_maps->dmamap_table->dm_segs[0].ds_addr), DEBUG_PROBE);
797 	/* Create a xfer DMA map for this drive */
798 	if ((error = bus_dmamap_create(sc->sc_dmat, IDEDMA_BYTE_COUNT_MAX,
799 	    NIDEDMA_TABLES, IDEDMA_BYTE_COUNT_MAX, IDEDMA_BYTE_COUNT_ALIGN,
800 	    BUS_DMA_NOWAIT | BUS_DMA_ALLOCNOW,
801 	    &dma_maps->dmamap_xfer)) != 0) {
802 		printf("%s:%d: unable to create xfer DMA map for "
803 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
804 		    channel, drive, error);
805 		return error;
806 	}
807 	return 0;
808 }
809 
810 int
811 pciide_dma_init(v, channel, drive, databuf, datalen, flags)
812 	void *v;
813 	int channel, drive;
814 	void *databuf;
815 	size_t datalen;
816 	int flags;
817 {
818 	struct pciide_softc *sc = v;
819 	int error, seg;
820 	struct pciide_dma_maps *dma_maps =
821 	    &sc->pciide_channels[channel].dma_maps[drive];
822 
823 	error = bus_dmamap_load(sc->sc_dmat,
824 	    dma_maps->dmamap_xfer,
825 	    databuf, datalen, NULL, BUS_DMA_NOWAIT);
826 	if (error) {
827 		printf("%s:%d: unable to load xfer DMA map for"
828 		    "drive %d, error=%d\n", sc->sc_wdcdev.sc_dev.dv_xname,
829 		    channel, drive, error);
830 		return error;
831 	}
832 
833 	bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
834 	    dma_maps->dmamap_xfer->dm_mapsize,
835 	    (flags & WDC_DMA_READ) ?
836 	    BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
837 
838 	for (seg = 0; seg < dma_maps->dmamap_xfer->dm_nsegs; seg++) {
839 #ifdef DIAGNOSTIC
840 		/* A segment must not cross a 64k boundary */
841 		{
842 		u_long phys = dma_maps->dmamap_xfer->dm_segs[seg].ds_addr;
843 		u_long len = dma_maps->dmamap_xfer->dm_segs[seg].ds_len;
844 		if ((phys & ~IDEDMA_BYTE_COUNT_MASK) !=
845 		    ((phys + len - 1) & ~IDEDMA_BYTE_COUNT_MASK)) {
846 			printf("pciide_dma: segment %d physical addr 0x%lx"
847 			    " len 0x%lx not properly aligned\n",
848 			    seg, phys, len);
849 			panic("pciide_dma: buf align");
850 		}
851 		}
852 #endif
853 		dma_maps->dma_table[seg].base_addr =
854 		    htopci(dma_maps->dmamap_xfer->dm_segs[seg].ds_addr);
855 		dma_maps->dma_table[seg].byte_count =
856 		    htopci(dma_maps->dmamap_xfer->dm_segs[seg].ds_len &
857 		    IDEDMA_BYTE_COUNT_MASK);
858 		WDCDEBUG_PRINT(("\t seg %d len %d addr 0x%x\n",
859 		   seg, pcitoh(dma_maps->dma_table[seg].byte_count),
860 		   pcitoh(dma_maps->dma_table[seg].base_addr)), DEBUG_DMA);
861 
862 	}
863 	dma_maps->dma_table[dma_maps->dmamap_xfer->dm_nsegs -1].byte_count |=
864 	    htopci(IDEDMA_BYTE_COUNT_EOT);
865 
866 	bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_table, 0,
867 	    dma_maps->dmamap_table->dm_mapsize,
868 	    BUS_DMASYNC_PREWRITE);
869 
870 	/* Maps are ready. Start DMA function */
871 #ifdef DIAGNOSTIC
872 	if (dma_maps->dmamap_table->dm_segs[0].ds_addr & ~IDEDMA_TBL_MASK) {
873 		printf("pciide_dma_init: addr 0x%lx not properly aligned\n",
874 		    dma_maps->dmamap_table->dm_segs[0].ds_addr);
875 		panic("pciide_dma_init: table align");
876 	}
877 #endif
878 
879 	/* Clear status bits */
880 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
881 	    IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel,
882 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
883 		IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel));
884 	/* Write table addr */
885 	bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh,
886 	    IDEDMA_TBL + IDEDMA_SCH_OFFSET * channel,
887 	    dma_maps->dmamap_table->dm_segs[0].ds_addr);
888 	/* set read/write */
889 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
890 	    IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
891 	    (flags & WDC_DMA_READ) ? IDEDMA_CMD_WRITE: 0);
892 	return 0;
893 }
894 
895 void
896 pciide_dma_start(v, channel, drive, flags)
897 	void *v;
898 	int channel, drive, flags;
899 {
900 	struct pciide_softc *sc = v;
901 
902 	WDCDEBUG_PRINT(("pciide_dma_start\n"),DEBUG_XFERS);
903 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
904 	    IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
905 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
906 		IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) | IDEDMA_CMD_START);
907 }
908 
909 int
910 pciide_dma_finish(v, channel, drive, flags)
911 	void *v;
912 	int channel, drive;
913 	int flags;
914 {
915 	struct pciide_softc *sc = v;
916 	u_int8_t status;
917 	struct pciide_dma_maps *dma_maps =
918 	    &sc->pciide_channels[channel].dma_maps[drive];
919 
920 	/* Unload the map of the data buffer */
921 	bus_dmamap_sync(sc->sc_dmat, dma_maps->dmamap_xfer, 0,
922 	    dma_maps->dmamap_xfer->dm_mapsize,
923 	    (flags & WDC_DMA_READ) ?
924 	    BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
925 	bus_dmamap_unload(sc->sc_dmat, dma_maps->dmamap_xfer);
926 
927 	status = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
928 	    IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel);
929 	WDCDEBUG_PRINT(("pciide_dma_finish: status 0x%x\n", status),
930 	    DEBUG_XFERS);
931 
932 	/* stop DMA channel */
933 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
934 	    IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel,
935 	    bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh,
936 		IDEDMA_CMD + IDEDMA_SCH_OFFSET * channel) & ~IDEDMA_CMD_START);
937 
938 	/* Clear status bits */
939 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
940 	    IDEDMA_CTL + IDEDMA_SCH_OFFSET * channel,
941 	    status);
942 
943 	if ((status & IDEDMA_CTL_ERR) != 0) {
944 		printf("%s:%d:%d: Bus-Master DMA error: status=0x%x\n",
945 		    sc->sc_wdcdev.sc_dev.dv_xname, channel, drive, status);
946 		return -1;
947 	}
948 
949 	if ((flags & WDC_DMA_POLL) == 0 && (status & IDEDMA_CTL_INTR) == 0) {
950 		printf("%s:%d:%d: Bus-Master DMA error: missing interrupt, "
951 		    "status=0x%x\n", sc->sc_wdcdev.sc_dev.dv_xname, channel,
952 		    drive, status);
953 		return -1;
954 	}
955 
956 	if ((status & IDEDMA_CTL_ACT) != 0) {
957 		/* data underrun, may be a valid condition for ATAPI */
958 		return 1;
959 	}
960 	return 0;
961 }
962 
963 /* some common code used by several chip_map */
964 int
965 pciide_chansetup(sc, channel, interface)
966 	struct pciide_softc *sc;
967 	int channel;
968 	pcireg_t interface;
969 {
970 	struct pciide_channel *cp = &sc->pciide_channels[channel];
971 	sc->wdc_chanarray[channel] = &cp->wdc_channel;
972 	cp->name = PCIIDE_CHANNEL_NAME(channel);
973 	cp->wdc_channel.channel = channel;
974 	cp->wdc_channel.wdc = &sc->sc_wdcdev;
975 	cp->wdc_channel.ch_queue =
976 	    malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
977 	if (cp->wdc_channel.ch_queue == NULL) {
978 		printf("%s %s channel: "
979 		    "can't allocate memory for command queue",
980 		sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
981 		return 0;
982 	}
983 	printf("%s: %s channel %s to %s mode\n",
984 	    sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
985 	    (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
986 	    "configured" : "wired",
987 	    (interface & PCIIDE_INTERFACE_PCI(channel)) ?
988 	    "native-PCI" : "compatibility");
989 	return 1;
990 }
991 
992 /* some common code used by several chip channel_map */
993 void
994 pciide_mapchan(pa, cp, interface, cmdsizep, ctlsizep, pci_intr)
995 	struct pci_attach_args *pa;
996 	struct pciide_channel *cp;
997 	pcireg_t interface;
998 	bus_size_t *cmdsizep, *ctlsizep;
999 	int (*pci_intr) __P((void *));
1000 {
1001 	struct channel_softc *wdc_cp = &cp->wdc_channel;
1002 
1003 	if (interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel))
1004 		cp->hw_ok = pciide_mapregs_native(pa, cp, cmdsizep, ctlsizep,
1005 		    pci_intr);
1006 	else
1007 		cp->hw_ok = pciide_mapregs_compat(pa, cp,
1008 		    wdc_cp->channel, cmdsizep, ctlsizep);
1009 
1010 	if (cp->hw_ok == 0)
1011 		return;
1012 	wdc_cp->data32iot = wdc_cp->cmd_iot;
1013 	wdc_cp->data32ioh = wdc_cp->cmd_ioh;
1014 	wdcattach(wdc_cp);
1015 }
1016 
1017 /*
1018  * Generic code to call to know if a channel can be disabled. Return 1
1019  * if channel can be disabled, 0 if not
1020  */
1021 int
1022 pciiide_chan_candisable(cp)
1023 	struct pciide_channel *cp;
1024 {
1025 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
1026 	struct channel_softc *wdc_cp = &cp->wdc_channel;
1027 
1028 	if ((wdc_cp->ch_drive[0].drive_flags & DRIVE) == 0 &&
1029 	    (wdc_cp->ch_drive[1].drive_flags & DRIVE) == 0) {
1030 		printf("%s: disabling %s channel (no drives)\n",
1031 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
1032 		cp->hw_ok = 0;
1033 		return 1;
1034 	}
1035 	return 0;
1036 }
1037 
1038 /*
1039  * generic code to map the compat intr if hw_ok=1 and it is a compat channel.
1040  * Set hw_ok=0 on failure
1041  */
1042 void
1043 pciide_map_compat_intr(pa, cp, compatchan, interface)
1044 	struct pci_attach_args *pa;
1045 	struct pciide_channel *cp;
1046 	int compatchan, interface;
1047 {
1048 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
1049 	struct channel_softc *wdc_cp = &cp->wdc_channel;
1050 
1051 	if (cp->hw_ok == 0)
1052 		return;
1053 	if ((interface & PCIIDE_INTERFACE_PCI(wdc_cp->channel)) != 0)
1054 		return;
1055 
1056 	cp->ih = pciide_machdep_compat_intr_establish(&sc->sc_wdcdev.sc_dev,
1057 	    pa, compatchan, pciide_compat_intr, cp);
1058 	if (cp->ih == NULL) {
1059 		printf("%s: no compatibility interrupt for use by %s "
1060 		    "channel\n", sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
1061 		cp->hw_ok = 0;
1062 	}
1063 }
1064 
1065 void
1066 pciide_print_modes(cp)
1067 	struct pciide_channel *cp;
1068 {
1069 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
1070 	int drive;
1071 	struct channel_softc *chp;
1072 	struct ata_drive_datas *drvp;
1073 
1074 	chp = &cp->wdc_channel;
1075 	for (drive = 0; drive < 2; drive++) {
1076 		drvp = &chp->ch_drive[drive];
1077 		if ((drvp->drive_flags & DRIVE) == 0)
1078 			continue;
1079 		printf("%s(%s:%d:%d): using PIO mode %d",
1080 		    drvp->drv_softc->dv_xname,
1081 		    sc->sc_wdcdev.sc_dev.dv_xname,
1082 		    chp->channel, drive, drvp->PIO_mode);
1083 		if (drvp->drive_flags & DRIVE_DMA)
1084 			printf(", DMA mode %d", drvp->DMA_mode);
1085 		if (drvp->drive_flags & DRIVE_UDMA)
1086 			printf(", Ultra-DMA mode %d", drvp->UDMA_mode);
1087 		if (drvp->drive_flags & (DRIVE_DMA | DRIVE_UDMA))
1088 			printf(" (using DMA data transfers)");
1089 		printf("\n");
1090 	}
1091 }
1092 
1093 void
1094 default_chip_map(sc, pa)
1095 	struct pciide_softc *sc;
1096 	struct pci_attach_args *pa;
1097 {
1098 	struct pciide_channel *cp;
1099 	pcireg_t interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc,
1100 				    sc->sc_tag, PCI_CLASS_REG));
1101 	pcireg_t csr;
1102 	int channel, drive;
1103 	struct ata_drive_datas *drvp;
1104 	u_int8_t idedma_ctl;
1105 	bus_size_t cmdsize, ctlsize;
1106 	char *failreason;
1107 
1108 	if (pciide_chipen(sc, pa) == 0)
1109 		return;
1110 
1111 	if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
1112 		printf("%s: bus-master DMA support present",
1113 		    sc->sc_wdcdev.sc_dev.dv_xname);
1114 		if (sc->sc_pp == &default_product_desc &&
1115 		    (sc->sc_wdcdev.sc_dev.dv_cfdata->cf_flags &
1116 		    PCIIDE_OPTIONS_DMA) == 0) {
1117 			printf(", but unused (no driver support)");
1118 			sc->sc_dma_ok = 0;
1119 		} else {
1120 			pciide_mapreg_dma(sc, pa);
1121 		if (sc->sc_dma_ok != 0)
1122 			printf(", used without full driver "
1123 			    "support");
1124 		}
1125 	} else {
1126 		printf("%s: hardware does not support DMA",
1127 		    sc->sc_wdcdev.sc_dev.dv_xname);
1128 		sc->sc_dma_ok = 0;
1129 	}
1130 	printf("\n");
1131 	if (sc->sc_dma_ok)
1132 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
1133 	sc->sc_wdcdev.PIO_cap = 0;
1134 	sc->sc_wdcdev.DMA_cap = 0;
1135 
1136 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
1137 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
1138 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16;
1139 
1140 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
1141 		cp = &sc->pciide_channels[channel];
1142 		if (pciide_chansetup(sc, channel, interface) == 0)
1143 			continue;
1144 		if (interface & PCIIDE_INTERFACE_PCI(channel)) {
1145 			cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize,
1146 			    &ctlsize, pciide_pci_intr);
1147 		} else {
1148 			cp->hw_ok = pciide_mapregs_compat(pa, cp,
1149 			    channel, &cmdsize, &ctlsize);
1150 		}
1151 		if (cp->hw_ok == 0)
1152 			continue;
1153 		/*
1154 		 * Check to see if something appears to be there.
1155 		 */
1156 		failreason = NULL;
1157 		if (!wdcprobe(&cp->wdc_channel)) {
1158 			failreason = "not responding; disabled or no drives?";
1159 			goto next;
1160 		}
1161 		/*
1162 		 * Now, make sure it's actually attributable to this PCI IDE
1163 		 * channel by trying to access the channel again while the
1164 		 * PCI IDE controller's I/O space is disabled.  (If the
1165 		 * channel no longer appears to be there, it belongs to
1166 		 * this controller.)  YUCK!
1167 		 */
1168 		csr = pci_conf_read(sc->sc_pc, sc->sc_tag,
1169 		    PCI_COMMAND_STATUS_REG);
1170 		pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_COMMAND_STATUS_REG,
1171 		    csr & ~PCI_COMMAND_IO_ENABLE);
1172 		if (wdcprobe(&cp->wdc_channel))
1173 			failreason = "other hardware responding at addresses";
1174 		pci_conf_write(sc->sc_pc, sc->sc_tag,
1175 		    PCI_COMMAND_STATUS_REG, csr);
1176 next:
1177 		if (failreason) {
1178 			printf("%s: %s channel ignored (%s)\n",
1179 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
1180 			    failreason);
1181 			cp->hw_ok = 0;
1182 			bus_space_unmap(cp->wdc_channel.cmd_iot,
1183 			    cp->wdc_channel.cmd_ioh, cmdsize);
1184 			bus_space_unmap(cp->wdc_channel.ctl_iot,
1185 			    cp->wdc_channel.ctl_ioh, ctlsize);
1186 		} else {
1187 			pciide_map_compat_intr(pa, cp, channel, interface);
1188 		}
1189 		if (cp->hw_ok) {
1190 			cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
1191 			cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
1192 			wdcattach(&cp->wdc_channel);
1193 		}
1194 	}
1195 
1196 	if (sc->sc_dma_ok == 0)
1197 		return;
1198 
1199 	/* Allocate DMA maps */
1200 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
1201 		idedma_ctl = 0;
1202 		cp = &sc->pciide_channels[channel];
1203 		for (drive = 0; drive < 2; drive++) {
1204 			drvp = &cp->wdc_channel.ch_drive[drive];
1205 			/* If no drive, skip */
1206 			if ((drvp->drive_flags & DRIVE) == 0)
1207 				continue;
1208 			if ((drvp->drive_flags & DRIVE_DMA) == 0)
1209 				continue;
1210 			if (pciide_dma_table_setup(sc, channel, drive) != 0) {
1211 				/* Abort DMA setup */
1212 				printf("%s:%d:%d: can't allocate DMA maps, "
1213 				    "using PIO transfers\n",
1214 				    sc->sc_wdcdev.sc_dev.dv_xname,
1215 				    channel, drive);
1216 				drvp->drive_flags &= ~DRIVE_DMA;
1217 			}
1218 			printf("%s:%d:%d: using DMA data transfers\n",
1219 			    sc->sc_wdcdev.sc_dev.dv_xname,
1220 			    channel, drive);
1221 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
1222 		}
1223 		if (idedma_ctl != 0) {
1224 			/* Add software bits in status register */
1225 			bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
1226 			    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel),
1227 			    idedma_ctl);
1228 		}
1229 	}
1230 }
1231 
1232 void
1233 piix_chip_map(sc, pa)
1234 	struct pciide_softc *sc;
1235 	struct pci_attach_args *pa;
1236 {
1237 	struct pciide_channel *cp;
1238 	int channel;
1239 	u_int32_t idetim;
1240 	bus_size_t cmdsize, ctlsize;
1241 
1242 	if (pciide_chipen(sc, pa) == 0)
1243 		return;
1244 
1245 	printf("%s: bus-master DMA support present",
1246 	    sc->sc_wdcdev.sc_dev.dv_xname);
1247 	pciide_mapreg_dma(sc, pa);
1248 	printf("\n");
1249 	if (sc->sc_dma_ok) {
1250 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
1251 		switch(sc->sc_pp->ide_product) {
1252 		case PCI_PRODUCT_INTEL_82371AB_IDE:
1253 		case PCI_PRODUCT_INTEL_82801AA_IDE:
1254 		case PCI_PRODUCT_INTEL_82801AB_IDE:
1255 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
1256 		}
1257 	}
1258 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
1259 	    WDC_CAPABILITY_MODE;
1260 	sc->sc_wdcdev.PIO_cap = 4;
1261 	sc->sc_wdcdev.DMA_cap = 2;
1262 	sc->sc_wdcdev.UDMA_cap =
1263 	    (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE) ? 4 : 2;
1264 	if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82371FB_IDE)
1265 		sc->sc_wdcdev.set_modes = piix_setup_channel;
1266 	else
1267 		sc->sc_wdcdev.set_modes = piix3_4_setup_channel;
1268 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
1269 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
1270 
1271 	WDCDEBUG_PRINT(("piix_setup_chip: old idetim=0x%x",
1272 	    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
1273 	    DEBUG_PROBE);
1274 	if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
1275 		WDCDEBUG_PRINT((", sidetim=0x%x",
1276 		    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
1277 		    DEBUG_PROBE);
1278 		if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
1279 			WDCDEBUG_PRINT((", udamreg 0x%x",
1280 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
1281 			    DEBUG_PROBE);
1282 		}
1283 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
1284 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE) {
1285 			WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
1286 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
1287 			    DEBUG_PROBE);
1288 		}
1289 
1290 	}
1291 	WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
1292 
1293 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
1294 		cp = &sc->pciide_channels[channel];
1295 		/* PIIX is compat-only */
1296 		if (pciide_chansetup(sc, channel, 0) == 0)
1297 			continue;
1298 		idetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
1299 		if ((PIIX_IDETIM_READ(idetim, channel) &
1300 		    PIIX_IDETIM_IDE) == 0) {
1301 			printf("%s: %s channel ignored (disabled)\n",
1302 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
1303 			return;
1304 		}
1305 		/* PIIX are compat-only pciide devices */
1306 		pciide_mapchan(pa, cp, 0, &cmdsize, &ctlsize, pciide_pci_intr);
1307 		if (cp->hw_ok == 0)
1308 			continue;
1309 		if (pciiide_chan_candisable(cp)) {
1310 			idetim = PIIX_IDETIM_CLEAR(idetim, PIIX_IDETIM_IDE,
1311 			    channel);
1312 			pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM,
1313 			    idetim);
1314 		}
1315 		pciide_map_compat_intr(pa, cp, channel, 0);
1316 		if (cp->hw_ok == 0)
1317 			continue;
1318 		sc->sc_wdcdev.set_modes(&cp->wdc_channel);
1319 	}
1320 
1321 	WDCDEBUG_PRINT(("piix_setup_chip: idetim=0x%x",
1322 	    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM)),
1323 	    DEBUG_PROBE);
1324 	if (sc->sc_pp->ide_product != PCI_PRODUCT_INTEL_82371FB_IDE) {
1325 		WDCDEBUG_PRINT((", sidetim=0x%x",
1326 		    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM)),
1327 		    DEBUG_PROBE);
1328 		if (sc->sc_wdcdev.cap & WDC_CAPABILITY_UDMA) {
1329 			WDCDEBUG_PRINT((", udamreg 0x%x",
1330 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG)),
1331 			    DEBUG_PROBE);
1332 		}
1333 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
1334 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE) {
1335 			WDCDEBUG_PRINT((", IDE_CONTROL 0x%x",
1336 			    pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG)),
1337 			    DEBUG_PROBE);
1338 		}
1339 	}
1340 	WDCDEBUG_PRINT(("\n"), DEBUG_PROBE);
1341 }
1342 
1343 void
1344 piix_setup_channel(chp)
1345 	struct channel_softc *chp;
1346 {
1347 	u_int8_t mode[2], drive;
1348 	u_int32_t oidetim, idetim, idedma_ctl;
1349 	struct pciide_channel *cp = (struct pciide_channel*)chp;
1350 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
1351 	struct ata_drive_datas *drvp = cp->wdc_channel.ch_drive;
1352 
1353 	oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
1354 	idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, chp->channel);
1355 	idedma_ctl = 0;
1356 
1357 	/* set up new idetim: Enable IDE registers decode */
1358 	idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE,
1359 	    chp->channel);
1360 
1361 	/* setup DMA */
1362 	pciide_channel_dma_setup(cp);
1363 
1364 	/*
1365 	 * Here we have to mess up with drives mode: PIIX can't have
1366 	 * different timings for master and slave drives.
1367 	 * We need to find the best combination.
1368 	 */
1369 
1370 	/* If both drives supports DMA, take the lower mode */
1371 	if ((drvp[0].drive_flags & DRIVE_DMA) &&
1372 	    (drvp[1].drive_flags & DRIVE_DMA)) {
1373 		mode[0] = mode[1] =
1374 		    min(drvp[0].DMA_mode, drvp[1].DMA_mode);
1375 		    drvp[0].DMA_mode = mode[0];
1376 		    drvp[1].DMA_mode = mode[1];
1377 		goto ok;
1378 	}
1379 	/*
1380 	 * If only one drive supports DMA, use its mode, and
1381 	 * put the other one in PIO mode 0 if mode not compatible
1382 	 */
1383 	if (drvp[0].drive_flags & DRIVE_DMA) {
1384 		mode[0] = drvp[0].DMA_mode;
1385 		mode[1] = drvp[1].PIO_mode;
1386 		if (piix_isp_pio[mode[1]] != piix_isp_dma[mode[0]] ||
1387 		    piix_rtc_pio[mode[1]] != piix_rtc_dma[mode[0]])
1388 			mode[1] = drvp[1].PIO_mode = 0;
1389 		goto ok;
1390 	}
1391 	if (drvp[1].drive_flags & DRIVE_DMA) {
1392 		mode[1] = drvp[1].DMA_mode;
1393 		mode[0] = drvp[0].PIO_mode;
1394 		if (piix_isp_pio[mode[0]] != piix_isp_dma[mode[1]] ||
1395 		    piix_rtc_pio[mode[0]] != piix_rtc_dma[mode[1]])
1396 			mode[0] = drvp[0].PIO_mode = 0;
1397 		goto ok;
1398 	}
1399 	/*
1400 	 * If both drives are not DMA, takes the lower mode, unless
1401 	 * one of them is PIO mode < 2
1402 	 */
1403 	if (drvp[0].PIO_mode < 2) {
1404 		mode[0] = drvp[0].PIO_mode = 0;
1405 		mode[1] = drvp[1].PIO_mode;
1406 	} else if (drvp[1].PIO_mode < 2) {
1407 		mode[1] = drvp[1].PIO_mode = 0;
1408 		mode[0] = drvp[0].PIO_mode;
1409 	} else {
1410 		mode[0] = mode[1] =
1411 		    min(drvp[1].PIO_mode, drvp[0].PIO_mode);
1412 		drvp[0].PIO_mode = mode[0];
1413 		drvp[1].PIO_mode = mode[1];
1414 	}
1415 ok:	/* The modes are setup */
1416 	for (drive = 0; drive < 2; drive++) {
1417 		if (drvp[drive].drive_flags & DRIVE_DMA) {
1418 			idetim |= piix_setup_idetim_timings(
1419 			    mode[drive], 1, chp->channel);
1420 			goto end;
1421 		}
1422 	}
1423 	/* If we are there, none of the drives are DMA */
1424 	if (mode[0] >= 2)
1425 		idetim |= piix_setup_idetim_timings(
1426 		    mode[0], 0, chp->channel);
1427 	else
1428 		idetim |= piix_setup_idetim_timings(
1429 		    mode[1], 0, chp->channel);
1430 end:	/*
1431 	 * timing mode is now set up in the controller. Enable
1432 	 * it per-drive
1433 	 */
1434 	for (drive = 0; drive < 2; drive++) {
1435 		/* If no drive, skip */
1436 		if ((drvp[drive].drive_flags & DRIVE) == 0)
1437 			continue;
1438 		idetim |= piix_setup_idetim_drvs(&drvp[drive]);
1439 		if (drvp[drive].drive_flags & DRIVE_DMA)
1440 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
1441 	}
1442 	if (idedma_ctl != 0) {
1443 		/* Add software bits in status register */
1444 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
1445 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
1446 		    idedma_ctl);
1447 	}
1448 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
1449 	pciide_print_modes(cp);
1450 }
1451 
1452 void
1453 piix3_4_setup_channel(chp)
1454 	struct channel_softc *chp;
1455 {
1456 	struct ata_drive_datas *drvp;
1457 	u_int32_t oidetim, idetim, sidetim, udmareg, ideconf, idedma_ctl;
1458 	struct pciide_channel *cp = (struct pciide_channel*)chp;
1459 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
1460 	int drive;
1461 	int channel = chp->channel;
1462 
1463 	oidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_IDETIM);
1464 	sidetim = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM);
1465 	udmareg = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG);
1466 	ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, PIIX_CONFIG);
1467 	idetim = PIIX_IDETIM_CLEAR(oidetim, 0xffff, channel);
1468 	sidetim &= ~(PIIX_SIDETIM_ISP_MASK(channel) |
1469 	    PIIX_SIDETIM_RTC_MASK(channel));
1470 
1471 	idedma_ctl = 0;
1472 	/* If channel disabled, no need to go further */
1473 	if ((PIIX_IDETIM_READ(oidetim, channel) & PIIX_IDETIM_IDE) == 0)
1474 		return;
1475 	/* set up new idetim: Enable IDE registers decode */
1476 	idetim = PIIX_IDETIM_SET(idetim, PIIX_IDETIM_IDE, channel);
1477 
1478 	/* setup DMA if needed */
1479 	pciide_channel_dma_setup(cp);
1480 
1481 	for (drive = 0; drive < 2; drive++) {
1482 		udmareg &= ~(PIIX_UDMACTL_DRV_EN(channel, drive) |
1483 		    PIIX_UDMATIM_SET(0x3, channel, drive));
1484 		drvp = &chp->ch_drive[drive];
1485 		/* If no drive, skip */
1486 		if ((drvp->drive_flags & DRIVE) == 0)
1487 			continue;
1488 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
1489 		    (drvp->drive_flags & DRIVE_UDMA) == 0))
1490 			goto pio;
1491 
1492 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE ||
1493 		    sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AB_IDE) {
1494 			ideconf |= PIIX_CONFIG_PINGPONG;
1495 		}
1496 		if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_82801AA_IDE) {
1497 			/* setup Ultra/66 */
1498 			if (drvp->UDMA_mode > 2 &&
1499 			    (ideconf & PIIX_CONFIG_CR(channel, drive)) == 0)
1500 				drvp->UDMA_mode = 2;
1501 			if (drvp->UDMA_mode > 2)
1502 				ideconf |= PIIX_CONFIG_UDMA66(channel, drive);
1503 			else
1504 				ideconf &= ~PIIX_CONFIG_UDMA66(channel, drive);
1505 		}
1506 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
1507 		    (drvp->drive_flags & DRIVE_UDMA)) {
1508 			/* use Ultra/DMA */
1509 			drvp->drive_flags &= ~DRIVE_DMA;
1510 			udmareg |= PIIX_UDMACTL_DRV_EN( channel, drive);
1511 			udmareg |= PIIX_UDMATIM_SET(
1512 			    piix4_sct_udma[drvp->UDMA_mode], channel, drive);
1513 		} else {
1514 			/* use Multiword DMA */
1515 			drvp->drive_flags &= ~DRIVE_UDMA;
1516 			if (drive == 0) {
1517 				idetim |= piix_setup_idetim_timings(
1518 				    drvp->DMA_mode, 1, channel);
1519 			} else {
1520 				sidetim |= piix_setup_sidetim_timings(
1521 					drvp->DMA_mode, 1, channel);
1522 				idetim =PIIX_IDETIM_SET(idetim,
1523 				    PIIX_IDETIM_SITRE, channel);
1524 			}
1525 		}
1526 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
1527 
1528 pio:		/* use PIO mode */
1529 		idetim |= piix_setup_idetim_drvs(drvp);
1530 		if (drive == 0) {
1531 			idetim |= piix_setup_idetim_timings(
1532 			    drvp->PIO_mode, 0, channel);
1533 		} else {
1534 			sidetim |= piix_setup_sidetim_timings(
1535 				drvp->PIO_mode, 0, channel);
1536 			idetim =PIIX_IDETIM_SET(idetim,
1537 			    PIIX_IDETIM_SITRE, channel);
1538 		}
1539 	}
1540 	if (idedma_ctl != 0) {
1541 		/* Add software bits in status register */
1542 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
1543 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * channel),
1544 		    idedma_ctl);
1545 	}
1546 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_IDETIM, idetim);
1547 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_SIDETIM, sidetim);
1548 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_UDMAREG, udmareg);
1549 	pci_conf_write(sc->sc_pc, sc->sc_tag, PIIX_CONFIG, ideconf);
1550 	pciide_print_modes(cp);
1551 }
1552 
1553 
1554 /* setup ISP and RTC fields, based on mode */
1555 static u_int32_t
1556 piix_setup_idetim_timings(mode, dma, channel)
1557 	u_int8_t mode;
1558 	u_int8_t dma;
1559 	u_int8_t channel;
1560 {
1561 
1562 	if (dma)
1563 		return PIIX_IDETIM_SET(0,
1564 		    PIIX_IDETIM_ISP_SET(piix_isp_dma[mode]) |
1565 		    PIIX_IDETIM_RTC_SET(piix_rtc_dma[mode]),
1566 		    channel);
1567 	else
1568 		return PIIX_IDETIM_SET(0,
1569 		    PIIX_IDETIM_ISP_SET(piix_isp_pio[mode]) |
1570 		    PIIX_IDETIM_RTC_SET(piix_rtc_pio[mode]),
1571 		    channel);
1572 }
1573 
1574 /* setup DTE, PPE, IE and TIME field based on PIO mode */
1575 static u_int32_t
1576 piix_setup_idetim_drvs(drvp)
1577 	struct ata_drive_datas *drvp;
1578 {
1579 	u_int32_t ret = 0;
1580 	struct channel_softc *chp = drvp->chnl_softc;
1581 	u_int8_t channel = chp->channel;
1582 	u_int8_t drive = drvp->drive;
1583 
1584 	/*
1585 	 * If drive is using UDMA, timings setups are independant
1586 	 * So just check DMA and PIO here.
1587 	 */
1588 	if (drvp->drive_flags & DRIVE_DMA) {
1589 		/* if mode = DMA mode 0, use compatible timings */
1590 		if ((drvp->drive_flags & DRIVE_DMA) &&
1591 		    drvp->DMA_mode == 0) {
1592 			drvp->PIO_mode = 0;
1593 			return ret;
1594 		}
1595 		ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
1596 		/*
1597 		 * PIO and DMA timings are the same, use fast timings for PIO
1598 		 * too, else use compat timings.
1599 		 */
1600 		if ((piix_isp_pio[drvp->PIO_mode] !=
1601 		    piix_isp_dma[drvp->DMA_mode]) ||
1602 		    (piix_rtc_pio[drvp->PIO_mode] !=
1603 		    piix_rtc_dma[drvp->DMA_mode]))
1604 			drvp->PIO_mode = 0;
1605 		/* if PIO mode <= 2, use compat timings for PIO */
1606 		if (drvp->PIO_mode <= 2) {
1607 			ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_DTE(drive),
1608 			    channel);
1609 			return ret;
1610 		}
1611 	}
1612 
1613 	/*
1614 	 * Now setup PIO modes. If mode < 2, use compat timings.
1615 	 * Else enable fast timings. Enable IORDY and prefetch/post
1616 	 * if PIO mode >= 3.
1617 	 */
1618 
1619 	if (drvp->PIO_mode < 2)
1620 		return ret;
1621 
1622 	ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_TIME(drive), channel);
1623 	if (drvp->PIO_mode >= 3) {
1624 		ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_IE(drive), channel);
1625 		ret = PIIX_IDETIM_SET(ret, PIIX_IDETIM_PPE(drive), channel);
1626 	}
1627 	return ret;
1628 }
1629 
1630 /* setup values in SIDETIM registers, based on mode */
1631 static u_int32_t
1632 piix_setup_sidetim_timings(mode, dma, channel)
1633 	u_int8_t mode;
1634 	u_int8_t dma;
1635 	u_int8_t channel;
1636 {
1637 	if (dma)
1638 		return PIIX_SIDETIM_ISP_SET(piix_isp_dma[mode], channel) |
1639 		    PIIX_SIDETIM_RTC_SET(piix_rtc_dma[mode], channel);
1640 	else
1641 		return PIIX_SIDETIM_ISP_SET(piix_isp_pio[mode], channel) |
1642 		    PIIX_SIDETIM_RTC_SET(piix_rtc_pio[mode], channel);
1643 }
1644 
1645 void
1646 apollo_chip_map(sc, pa)
1647 	struct pciide_softc *sc;
1648 	struct pci_attach_args *pa;
1649 {
1650 	struct pciide_channel *cp;
1651 	pcireg_t interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc,
1652 				    sc->sc_tag, PCI_CLASS_REG));
1653 	int channel;
1654 	u_int32_t ideconf;
1655 	bus_size_t cmdsize, ctlsize;
1656 
1657 	if (pciide_chipen(sc, pa) == 0)
1658 		return;
1659 	printf("%s: bus-master DMA support present",
1660 	    sc->sc_wdcdev.sc_dev.dv_xname);
1661 	pciide_mapreg_dma(sc, pa);
1662 	printf("\n");
1663 	if (sc->sc_dma_ok) {
1664 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
1665 		if (sc->sc_pp->ide_product == PCI_PRODUCT_VIATECH_VT82C586A_IDE)
1666 			sc->sc_wdcdev.cap |= WDC_CAPABILITY_UDMA;
1667 	}
1668 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA32 | WDC_CAPABILITY_MODE;
1669 	sc->sc_wdcdev.PIO_cap = 4;
1670 	sc->sc_wdcdev.DMA_cap = 2;
1671 	sc->sc_wdcdev.UDMA_cap = 2;
1672 	sc->sc_wdcdev.set_modes = apollo_setup_channel;
1673 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
1674 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
1675 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16;
1676 
1677 	WDCDEBUG_PRINT(("apollo_chip_map: old APO_IDECONF=0x%x, "
1678 	    "APO_CTLMISC=0x%x, APO_DATATIM=0x%x, APO_UDMA=0x%x\n",
1679 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF),
1680 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_CTLMISC),
1681 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM),
1682 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA)),
1683 	    DEBUG_PROBE);
1684 
1685 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
1686 		cp = &sc->pciide_channels[channel];
1687 		if (pciide_chansetup(sc, channel, interface) == 0)
1688 			continue;
1689 
1690 		ideconf = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_IDECONF);
1691 		if ((ideconf & APO_IDECONF_EN(channel)) == 0) {
1692 			printf("%s: %s channel ignored (disabled)\n",
1693 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
1694 			return;
1695 		}
1696 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
1697 		    pciide_pci_intr);
1698 		if (cp->hw_ok == 0)
1699 			continue;
1700 		if (pciiide_chan_candisable(cp)) {
1701 			ideconf &= ~APO_IDECONF_EN(channel);
1702 			pci_conf_write(sc->sc_pc, sc->sc_tag, APO_IDECONF,
1703 			    ideconf);
1704 		}
1705 		pciide_map_compat_intr(pa, cp, channel, interface);
1706 
1707 		if (cp->hw_ok == 0)
1708 			continue;
1709 		apollo_setup_channel(&sc->pciide_channels[channel].wdc_channel);
1710 	}
1711 	WDCDEBUG_PRINT(("apollo_chip_map: APO_DATATIM=0x%x, APO_UDMA=0x%x\n",
1712 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM),
1713 	    pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA)), DEBUG_PROBE);
1714 }
1715 
1716 void
1717 apollo_setup_channel(chp)
1718 	struct channel_softc *chp;
1719 {
1720 	u_int32_t udmatim_reg, datatim_reg;
1721 	u_int8_t idedma_ctl;
1722 	int mode, drive;
1723 	struct ata_drive_datas *drvp;
1724 	struct pciide_channel *cp = (struct pciide_channel*)chp;
1725 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
1726 
1727 	idedma_ctl = 0;
1728 	datatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_DATATIM);
1729 	udmatim_reg = pci_conf_read(sc->sc_pc, sc->sc_tag, APO_UDMA);
1730 	datatim_reg &= ~APO_DATATIM_MASK(chp->channel);
1731 	udmatim_reg &= ~AP0_UDMA_MASK(chp->channel);
1732 
1733 	/* setup DMA if needed */
1734 	pciide_channel_dma_setup(cp);
1735 
1736 	for (drive = 0; drive < 2; drive++) {
1737 		drvp = &chp->ch_drive[drive];
1738 		/* If no drive, skip */
1739 		if ((drvp->drive_flags & DRIVE) == 0)
1740 			continue;
1741 		/* add timing values, setup DMA if needed */
1742 		if (((drvp->drive_flags & DRIVE_DMA) == 0 &&
1743 		    (drvp->drive_flags & DRIVE_UDMA) == 0)) {
1744 			mode = drvp->PIO_mode;
1745 			goto pio;
1746 		}
1747 		if ((chp->wdc->cap & WDC_CAPABILITY_UDMA) &&
1748 		    (drvp->drive_flags & DRIVE_UDMA)) {
1749 			/* use Ultra/DMA */
1750 			drvp->drive_flags &= ~DRIVE_DMA;
1751 			udmatim_reg |= APO_UDMA_EN(chp->channel, drive) |
1752 			    APO_UDMA_EN_MTH(chp->channel, drive) |
1753 			    APO_UDMA_TIME(chp->channel, drive,
1754 				apollo_udma_tim[drvp->UDMA_mode]);
1755 			/* can use PIO timings, MW DMA unused */
1756 			mode = drvp->PIO_mode;
1757 		} else {
1758 			/* use Multiword DMA */
1759 			drvp->drive_flags &= ~DRIVE_UDMA;
1760 			/* mode = min(pio, dma+2) */
1761 			if (drvp->PIO_mode <= (drvp->DMA_mode +2))
1762 				mode = drvp->PIO_mode;
1763 			else
1764 				mode = drvp->DMA_mode + 2;
1765 		}
1766 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
1767 
1768 pio:		/* setup PIO mode */
1769 		if (mode <= 2) {
1770 			drvp->DMA_mode = 0;
1771 			drvp->PIO_mode = 0;
1772 			mode = 0;
1773 		} else {
1774 			drvp->PIO_mode = mode;
1775 			drvp->DMA_mode = mode - 2;
1776 		}
1777 		datatim_reg |=
1778 		    APO_DATATIM_PULSE(chp->channel, drive,
1779 			apollo_pio_set[mode]) |
1780 		    APO_DATATIM_RECOV(chp->channel, drive,
1781 			apollo_pio_rec[mode]);
1782 	}
1783 	if (idedma_ctl != 0) {
1784 		/* Add software bits in status register */
1785 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
1786 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
1787 		    idedma_ctl);
1788 	}
1789 	pciide_print_modes(cp);
1790 	pci_conf_write(sc->sc_pc, sc->sc_tag, APO_DATATIM, datatim_reg);
1791 	pci_conf_write(sc->sc_pc, sc->sc_tag, APO_UDMA, udmatim_reg);
1792 }
1793 
1794 void
1795 cmd_channel_map(pa, sc, channel)
1796 	struct pci_attach_args *pa;
1797 	struct pciide_softc *sc;
1798 	int channel;
1799 {
1800 	struct pciide_channel *cp = &sc->pciide_channels[channel];
1801 	bus_size_t cmdsize, ctlsize;
1802 	u_int8_t ctrl = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CTRL);
1803 	int interface =
1804 	    PCI_INTERFACE(pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG));
1805 
1806 	sc->wdc_chanarray[channel] = &cp->wdc_channel;
1807 	cp->name = PCIIDE_CHANNEL_NAME(channel);
1808 	cp->wdc_channel.channel = channel;
1809 	cp->wdc_channel.wdc = &sc->sc_wdcdev;
1810 
1811 	if (channel > 0) {
1812 		cp->wdc_channel.ch_queue =
1813 		    sc->pciide_channels[0].wdc_channel.ch_queue;
1814 	} else {
1815 		cp->wdc_channel.ch_queue =
1816 		    malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
1817 	}
1818 	if (cp->wdc_channel.ch_queue == NULL) {
1819 		printf("%s %s channel: "
1820 		    "can't allocate memory for command queue",
1821 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
1822 		    return;
1823 	}
1824 
1825 	printf("%s: %s channel %s to %s mode\n",
1826 	    sc->sc_wdcdev.sc_dev.dv_xname, cp->name,
1827 	    (interface & PCIIDE_INTERFACE_SETTABLE(channel)) ?
1828 	    "configured" : "wired",
1829 	    (interface & PCIIDE_INTERFACE_PCI(channel)) ?
1830 	    "native-PCI" : "compatibility");
1831 
1832 	/*
1833 	 * with a CMD PCI64x, if we get here, the first channel is enabled:
1834 	 * there's no way to disable the first channel without disabling
1835 	 * the whole device
1836 	 */
1837 	if (channel != 0 && (ctrl & CMD_CTRL_2PORT) == 0) {
1838 		printf("%s: %s channel ignored (disabled)\n",
1839 		    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
1840 		return;
1841 	}
1842 
1843 	pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize, cmd_pci_intr);
1844 	if (cp->hw_ok == 0)
1845 		return;
1846 	if (channel == 1) {
1847 		if (pciiide_chan_candisable(cp)) {
1848 			ctrl &= ~CMD_CTRL_2PORT;
1849 			pciide_pci_write(pa->pa_pc, pa->pa_tag,
1850 			    CMD_CTRL, ctrl);
1851 		}
1852 	}
1853 	pciide_map_compat_intr(pa, cp, channel, interface);
1854 }
1855 
1856 int
1857 cmd_pci_intr(arg)
1858 	void *arg;
1859 {
1860 	struct pciide_softc *sc = arg;
1861 	struct pciide_channel *cp;
1862 	struct channel_softc *wdc_cp;
1863 	int i, rv, crv;
1864 	u_int32_t priirq, secirq;
1865 
1866 	rv = 0;
1867 	priirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_CONF);
1868 	secirq = pciide_pci_read(sc->sc_pc, sc->sc_tag, CMD_ARTTIM23);
1869 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
1870 		cp = &sc->pciide_channels[i];
1871 		wdc_cp = &cp->wdc_channel;
1872 		/* If a compat channel skip. */
1873 		if (cp->compat)
1874 			continue;
1875 		if ((i == 0 && (priirq & CMD_CONF_DRV0_INTR)) ||
1876 		    (i == 1 && (secirq & CMD_ARTTIM23_IRQ))) {
1877 			crv = wdcintr(wdc_cp);
1878 			if (crv == 0)
1879 				printf("%s:%d: bogus intr\n",
1880 				    sc->sc_wdcdev.sc_dev.dv_xname, i);
1881 			else
1882 				rv = 1;
1883 		}
1884 	}
1885 	return rv;
1886 }
1887 
1888 void
1889 cmd_chip_map(sc, pa)
1890 	struct pciide_softc *sc;
1891 	struct pci_attach_args *pa;
1892 {
1893 	int channel;
1894 
1895 	/*
1896 	 * For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
1897 	 * and base adresses registers can be disabled at
1898 	 * hardware level. In this case, the device is wired
1899 	 * in compat mode and its first channel is always enabled,
1900 	 * but we can't rely on PCI_COMMAND_IO_ENABLE.
1901 	 * In fact, it seems that the first channel of the CMD PCI0640
1902 	 * can't be disabled.
1903 	 */
1904 
1905 #ifdef PCIIDE_CMD064x_DISABLE
1906 	if (pciide_chipen(sc, pa) == 0)
1907 		return;
1908 #endif
1909 
1910 	printf("%s: hardware does not support DMA\n",
1911 	    sc->sc_wdcdev.sc_dev.dv_xname);
1912 	sc->sc_dma_ok = 0;
1913 
1914 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
1915 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
1916 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16;
1917 
1918 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
1919 		cmd_channel_map(pa, sc, channel);
1920 	}
1921 }
1922 
1923 void
1924 cmd0643_6_chip_map(sc, pa)
1925 	struct pciide_softc *sc;
1926 	struct pci_attach_args *pa;
1927 {
1928 	struct pciide_channel *cp;
1929 	int channel;
1930 
1931 	/*
1932 	 * For a CMD PCI064x, the use of PCI_COMMAND_IO_ENABLE
1933 	 * and base adresses registers can be disabled at
1934 	 * hardware level. In this case, the device is wired
1935 	 * in compat mode and its first channel is always enabled,
1936 	 * but we can't rely on PCI_COMMAND_IO_ENABLE.
1937 	 * In fact, it seems that the first channel of the CMD PCI0640
1938 	 * can't be disabled.
1939 	 */
1940 
1941 #ifdef PCIIDE_CMD064x_DISABLE
1942 	if (pciide_chipen(sc, pa) == 0)
1943 		return;
1944 #endif
1945 	printf("%s: bus-master DMA support present",
1946 	    sc->sc_wdcdev.sc_dev.dv_xname);
1947 	pciide_mapreg_dma(sc, pa);
1948 	printf("\n");
1949 	if (sc->sc_dma_ok)
1950 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
1951 
1952 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
1953 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
1954 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
1955 	    WDC_CAPABILITY_MODE;
1956 	sc->sc_wdcdev.PIO_cap = 4;
1957 	sc->sc_wdcdev.DMA_cap = 2;
1958 	sc->sc_wdcdev.set_modes = cmd0643_6_setup_channel;
1959 
1960 	WDCDEBUG_PRINT(("cmd0643_6_chip_map: old timings reg 0x%x 0x%x\n",
1961 		pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
1962 		pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
1963 		DEBUG_PROBE);
1964 
1965 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
1966 		cp = &sc->pciide_channels[channel];
1967 		cmd_channel_map(pa, sc, channel);
1968 		if (cp->hw_ok == 0)
1969 			continue;
1970 		cmd0643_6_setup_channel(&cp->wdc_channel);
1971 	}
1972 	pciide_pci_write(sc->sc_pc, sc->sc_tag, CMD_DMA_MODE, CMD_DMA_MULTIPLE);
1973 	WDCDEBUG_PRINT(("cmd0643_6_chip_map: timings reg now 0x%x 0x%x\n",
1974 	    pci_conf_read(sc->sc_pc, sc->sc_tag, 0x54),
1975 	    pci_conf_read(sc->sc_pc, sc->sc_tag, 0x58)),
1976 	    DEBUG_PROBE);
1977 }
1978 
1979 void
1980 cmd0643_6_setup_channel(chp)
1981 	struct channel_softc *chp;
1982 {
1983 	struct ata_drive_datas *drvp;
1984 	u_int8_t tim;
1985 	u_int32_t idedma_ctl;
1986 	int drive;
1987 	struct pciide_channel *cp = (struct pciide_channel*)chp;
1988 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
1989 
1990 	idedma_ctl = 0;
1991 	/* setup DMA if needed */
1992 	pciide_channel_dma_setup(cp);
1993 
1994 	for (drive = 0; drive < 2; drive++) {
1995 		drvp = &chp->ch_drive[drive];
1996 		/* If no drive, skip */
1997 		if ((drvp->drive_flags & DRIVE) == 0)
1998 			continue;
1999 		/* add timing values, setup DMA if needed */
2000 		tim = cmd0643_6_data_tim_pio[drvp->PIO_mode];
2001 		if (drvp->drive_flags & DRIVE_DMA) {
2002 			/*
2003 			 * use Multiword DMA.
2004 			 * Timings will be used for both PIO and DMA, so adjust
2005 			 * DMA mode if needed
2006 			 */
2007 			if (drvp->PIO_mode >= 3 &&
2008 			    (drvp->DMA_mode + 2) > drvp->PIO_mode) {
2009 				drvp->DMA_mode = drvp->PIO_mode - 2;
2010 			}
2011 			tim = cmd0643_6_data_tim_dma[drvp->DMA_mode];
2012 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
2013 		}
2014 		pciide_pci_write(sc->sc_pc, sc->sc_tag,
2015 		    CMD_DATA_TIM(chp->channel, drive), tim);
2016 	}
2017 	if (idedma_ctl != 0) {
2018 		/* Add software bits in status register */
2019 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
2020 		    IDEDMA_CTL + (IDEDMA_SCH_OFFSET * chp->channel),
2021 		    idedma_ctl);
2022 	}
2023 	pciide_print_modes(cp);
2024 }
2025 
2026 void
2027 cy693_chip_map(sc, pa)
2028 	struct pciide_softc *sc;
2029 	struct pci_attach_args *pa;
2030 {
2031 	struct pciide_channel *cp;
2032 	pcireg_t interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc,
2033 				    sc->sc_tag, PCI_CLASS_REG));
2034 	int compatchan;
2035 	bus_size_t cmdsize, ctlsize;
2036 
2037 	if (pciide_chipen(sc, pa) == 0)
2038 		return;
2039 	/*
2040 	 * this chip has 2 PCI IDE functions, one for primary and one for
2041 	 * secondary. So we need to call pciide_mapregs_compat() with
2042 	 * the real channel
2043 	 */
2044 	if (pa->pa_function == 1) {
2045 		compatchan = 0;
2046 	} else if (pa->pa_function == 2) {
2047 		compatchan = 1;
2048 	} else {
2049 		printf("%s: unexpected PCI function %d\n",
2050 		    sc->sc_wdcdev.sc_dev.dv_xname, pa->pa_function);
2051 		cp->hw_ok = 0;
2052 		return;
2053 	}
2054 	if (interface & PCIIDE_INTERFACE_BUS_MASTER_DMA) {
2055 		printf("%s: bus-master DMA support present",
2056 		    sc->sc_wdcdev.sc_dev.dv_xname);
2057 		pciide_mapreg_dma(sc, pa);
2058 	} else {
2059 		printf("%s: hardware does not support DMA",
2060 		    sc->sc_wdcdev.sc_dev.dv_xname);
2061 		sc->sc_dma_ok = 0;
2062 	}
2063 	printf("\n");
2064 
2065 	if (sc->sc_dma_ok)
2066 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA;
2067 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
2068 	    WDC_CAPABILITY_MODE;
2069 	sc->sc_wdcdev.PIO_cap = 4;
2070 	sc->sc_wdcdev.DMA_cap = 2;
2071 	sc->sc_wdcdev.set_modes = cy693_setup_channel;
2072 
2073 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
2074 	sc->sc_wdcdev.nchannels = 1;
2075 
2076 	/* Only one channel for this chip; if we are here it's enabled */
2077 	cp = &sc->pciide_channels[0];
2078 		sc->wdc_chanarray[0] = &cp->wdc_channel;
2079 	cp->name = PCIIDE_CHANNEL_NAME(0);
2080 	cp->wdc_channel.channel = 0;
2081 	cp->wdc_channel.wdc = &sc->sc_wdcdev;
2082 	cp->wdc_channel.ch_queue =
2083 	    malloc(sizeof(struct channel_queue), M_DEVBUF, M_NOWAIT);
2084 	if (cp->wdc_channel.ch_queue == NULL) {
2085 		printf("%s primary channel: "
2086 		    "can't allocate memory for command queue",
2087 		sc->sc_wdcdev.sc_dev.dv_xname);
2088 		return;
2089 	}
2090 	printf("%s: primary channel %s to ",
2091 	    sc->sc_wdcdev.sc_dev.dv_xname,
2092 	    (interface & PCIIDE_INTERFACE_SETTABLE(0)) ?
2093 	    "configured" : "wired");
2094 	if (interface & PCIIDE_INTERFACE_PCI(0)) {
2095 		printf("native-PCI");
2096 		cp->hw_ok = pciide_mapregs_native(pa, cp, &cmdsize, &ctlsize,
2097 		    pciide_pci_intr);
2098 	} else {
2099 		printf("compatibility");
2100 		cp->hw_ok = pciide_mapregs_compat(pa, cp, compatchan,
2101 		    &cmdsize, &ctlsize);
2102 	}
2103 	printf(" mode\n");
2104 	cp->wdc_channel.data32iot = cp->wdc_channel.cmd_iot;
2105 	cp->wdc_channel.data32ioh = cp->wdc_channel.cmd_ioh;
2106 	wdcattach(&cp->wdc_channel);
2107 	if (pciiide_chan_candisable(cp)) {
2108 		pci_conf_write(sc->sc_pc, sc->sc_tag,
2109 		    PCI_COMMAND_STATUS_REG, 0);
2110 	}
2111 	pciide_map_compat_intr(pa, cp, compatchan, interface);
2112 	if (cp->hw_ok == 0)
2113 		return;
2114 	WDCDEBUG_PRINT(("cy693_chip_map: old timings reg 0x%x\n",
2115 	    pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)),DEBUG_PROBE);
2116 	cy693_setup_channel(&cp->wdc_channel);
2117 	WDCDEBUG_PRINT(("cy693_chip_map: new timings reg 0x%x\n",
2118 	    pci_conf_read(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL)), DEBUG_PROBE);
2119 }
2120 
2121 void
2122 cy693_setup_channel(chp)
2123 	struct channel_softc *chp;
2124 {
2125 	struct ata_drive_datas *drvp;
2126 	int drive;
2127 	u_int32_t cy_cmd_ctrl;
2128 	u_int32_t idedma_ctl;
2129 	struct pciide_channel *cp = (struct pciide_channel*)chp;
2130 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
2131 	int dma_mode = -1;
2132 
2133 	cy_cmd_ctrl = idedma_ctl = 0;
2134 
2135 	/* setup DMA if needed */
2136 	pciide_channel_dma_setup(cp);
2137 
2138 	for (drive = 0; drive < 2; drive++) {
2139 		drvp = &chp->ch_drive[drive];
2140 		/* If no drive, skip */
2141 		if ((drvp->drive_flags & DRIVE) == 0)
2142 			continue;
2143 		/* add timing values, setup DMA if needed */
2144 		if (drvp->drive_flags & DRIVE_DMA) {
2145 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
2146 			/* use Multiword DMA */
2147 			if (dma_mode == -1 || dma_mode > drvp->DMA_mode)
2148 				dma_mode = drvp->DMA_mode;
2149 		}
2150 		cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
2151 		    CY_CMD_CTRL_IOW_PULSE_OFF(drive));
2152 		cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
2153 		    CY_CMD_CTRL_IOW_REC_OFF(drive));
2154 		cy_cmd_ctrl |= (cy_pio_pulse[drvp->PIO_mode] <<
2155 		    CY_CMD_CTRL_IOR_PULSE_OFF(drive));
2156 		cy_cmd_ctrl |= (cy_pio_rec[drvp->PIO_mode] <<
2157 		    CY_CMD_CTRL_IOR_REC_OFF(drive));
2158 	}
2159 	pci_conf_write(sc->sc_pc, sc->sc_tag, CY_CMD_CTRL, cy_cmd_ctrl);
2160 	chp->ch_drive[0].DMA_mode = dma_mode;
2161 	chp->ch_drive[1].DMA_mode = dma_mode;
2162 	pciide_print_modes(cp);
2163 	if (idedma_ctl != 0) {
2164 		/* Add software bits in status register */
2165 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
2166 		    IDEDMA_CTL, idedma_ctl);
2167 	}
2168 }
2169 
2170 void
2171 sis_chip_map(sc, pa)
2172 	struct pciide_softc *sc;
2173 	struct pci_attach_args *pa;
2174 {
2175 	struct pciide_channel *cp;
2176 	int channel;
2177 	u_int8_t sis_ctr0 = pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_CTRL0);
2178 	pcireg_t interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc,
2179 				    sc->sc_tag, PCI_CLASS_REG));
2180 	bus_size_t cmdsize, ctlsize;
2181 
2182 	if (pciide_chipen(sc, pa) == 0)
2183 		return;
2184 	printf("%s: bus-master DMA support present",
2185 	    sc->sc_wdcdev.sc_dev.dv_xname);
2186 	pciide_mapreg_dma(sc, pa);
2187 	printf("\n");
2188 	if (sc->sc_dma_ok)
2189 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
2190 
2191 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
2192 	    WDC_CAPABILITY_MODE;
2193 	sc->sc_wdcdev.PIO_cap = 4;
2194 	sc->sc_wdcdev.DMA_cap = 2;
2195 	sc->sc_wdcdev.UDMA_cap = 2;
2196 	sc->sc_wdcdev.set_modes = sis_setup_channel;
2197 
2198 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
2199 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
2200 
2201 	pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_MISC,
2202 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, SIS_MISC) |
2203 	    SIS_MISC_TIM_SEL | SIS_MISC_FIFO_SIZE);
2204 
2205 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
2206 		cp = &sc->pciide_channels[channel];
2207 		if (pciide_chansetup(sc, channel, interface) == 0)
2208 			continue;
2209 		if ((channel == 0 && (sis_ctr0 & SIS_CTRL0_CHAN0_EN) == 0) ||
2210 		    (channel == 1 && (sis_ctr0 & SIS_CTRL0_CHAN1_EN) == 0)) {
2211 			printf("%s: %s channel ignored (disabled)\n",
2212 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
2213 			return;
2214 		}
2215 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
2216 		    pciide_pci_intr);
2217 		if (cp->hw_ok == 0)
2218 			continue;
2219 		if (pciiide_chan_candisable(cp)) {
2220 			if (channel == 0)
2221 				sis_ctr0 &= ~SIS_CTRL0_CHAN0_EN;
2222 			else
2223 				sis_ctr0 &= ~SIS_CTRL0_CHAN1_EN;
2224 			pciide_pci_write(sc->sc_pc, sc->sc_tag, SIS_CTRL0,
2225 			    sis_ctr0);
2226 		}
2227 		pciide_map_compat_intr(pa, cp, channel, interface);
2228 		if (cp->hw_ok == 0)
2229 			continue;
2230 		sis_setup_channel(&cp->wdc_channel);
2231 	}
2232 }
2233 
2234 void
2235 sis_setup_channel(chp)
2236 	struct channel_softc *chp;
2237 {
2238 	struct ata_drive_datas *drvp;
2239 	int drive;
2240 	u_int32_t sis_tim;
2241 	u_int32_t idedma_ctl;
2242 	struct pciide_channel *cp = (struct pciide_channel*)chp;
2243 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
2244 
2245 	WDCDEBUG_PRINT(("sis_setup_channel: old timings reg for "
2246 	    "channel %d 0x%x\n", chp->channel,
2247 	    pci_conf_read(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel))),
2248 	    DEBUG_PROBE);
2249 	sis_tim = 0;
2250 	idedma_ctl = 0;
2251 	/* setup DMA if needed */
2252 	pciide_channel_dma_setup(cp);
2253 
2254 	for (drive = 0; drive < 2; drive++) {
2255 		drvp = &chp->ch_drive[drive];
2256 		/* If no drive, skip */
2257 		if ((drvp->drive_flags & DRIVE) == 0)
2258 			continue;
2259 		/* add timing values, setup DMA if needed */
2260 		if ((drvp->drive_flags & DRIVE_DMA) == 0 &&
2261 		    (drvp->drive_flags & DRIVE_UDMA) == 0)
2262 			goto pio;
2263 
2264 		if (drvp->drive_flags & DRIVE_UDMA) {
2265 			/* use Ultra/DMA */
2266 			drvp->drive_flags &= ~DRIVE_DMA;
2267 			sis_tim |= sis_udma_tim[drvp->UDMA_mode] <<
2268 			    SIS_TIM_UDMA_TIME_OFF(drive);
2269 			sis_tim |= SIS_TIM_UDMA_EN(drive);
2270 		} else {
2271 			/*
2272 			 * use Multiword DMA
2273 			 * Timings will be used for both PIO and DMA,
2274 			 * so adjust DMA mode if needed
2275 			 */
2276 			if (drvp->PIO_mode > (drvp->DMA_mode + 2))
2277 				drvp->PIO_mode = drvp->DMA_mode + 2;
2278 			if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
2279 				drvp->DMA_mode = (drvp->PIO_mode > 2) ?
2280 				    drvp->PIO_mode - 2 : 0;
2281 			if (drvp->DMA_mode == 0)
2282 				drvp->PIO_mode = 0;
2283 		}
2284 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
2285 pio:		sis_tim |= sis_pio_act[drvp->PIO_mode] <<
2286 		    SIS_TIM_ACT_OFF(drive);
2287 		sis_tim |= sis_pio_rec[drvp->PIO_mode] <<
2288 		    SIS_TIM_REC_OFF(drive);
2289 	}
2290 	WDCDEBUG_PRINT(("sis_setup_channel: new timings reg for "
2291 	    "channel %d 0x%x\n", chp->channel, sis_tim), DEBUG_PROBE);
2292 	pci_conf_write(sc->sc_pc, sc->sc_tag, SIS_TIM(chp->channel), sis_tim);
2293 	if (idedma_ctl != 0) {
2294 		/* Add software bits in status register */
2295 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
2296 		    IDEDMA_CTL, idedma_ctl);
2297 	}
2298 	pciide_print_modes(cp);
2299 }
2300 
2301 void
2302 acer_chip_map(sc, pa)
2303 	struct pciide_softc *sc;
2304 	struct pci_attach_args *pa;
2305 {
2306 	struct pciide_channel *cp;
2307 	int channel;
2308 	pcireg_t cr, interface;
2309 	bus_size_t cmdsize, ctlsize;
2310 
2311 	if (pciide_chipen(sc, pa) == 0)
2312 		return;
2313 	printf("%s: bus-master DMA support present",
2314 	    sc->sc_wdcdev.sc_dev.dv_xname);
2315 	pciide_mapreg_dma(sc, pa);
2316 	printf("\n");
2317 	if (sc->sc_dma_ok)
2318 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
2319 
2320 	sc->sc_wdcdev.cap |= WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
2321 	    WDC_CAPABILITY_MODE;
2322 
2323 	sc->sc_wdcdev.PIO_cap = 4;
2324 	sc->sc_wdcdev.DMA_cap = 2;
2325 	sc->sc_wdcdev.UDMA_cap = 2;
2326 	sc->sc_wdcdev.set_modes = acer_setup_channel;
2327 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
2328 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
2329 
2330 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CDRC,
2331 	    (pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CDRC) |
2332 		ACER_CDRC_DMA_EN) & ~ACER_CDRC_FIFO_DISABLE);
2333 
2334 	/* Enable "microsoft register bits" R/W. */
2335 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR3,
2336 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR3) | ACER_CCAR3_PI);
2337 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR1,
2338 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR1) &
2339 	    ~(ACER_CHANSTATUS_RO|PCIIDE_CHAN_RO(0)|PCIIDE_CHAN_RO(1)));
2340 	pciide_pci_write(sc->sc_pc, sc->sc_tag, ACER_CCAR2,
2341 	    pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CCAR2) &
2342 	    ~ACER_CHANSTATUSREGS_RO);
2343 	cr = pci_conf_read(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG);
2344 	cr |= (PCIIDE_CHANSTATUS_EN << PCI_INTERFACE_SHIFT);
2345 	pci_conf_write(sc->sc_pc, sc->sc_tag, PCI_CLASS_REG, cr);
2346 	/* Don't use cr, re-read the real register content instead */
2347 	interface = PCI_INTERFACE(pci_conf_read(sc->sc_pc, sc->sc_tag,
2348 	    PCI_CLASS_REG));
2349 
2350 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
2351 		cp = &sc->pciide_channels[channel];
2352 		if (pciide_chansetup(sc, channel, interface) == 0)
2353 			continue;
2354 		if ((interface & PCIIDE_CHAN_EN(channel)) == 0) {
2355 			printf("%s: %s channel ignored (disabled)\n",
2356 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
2357 			continue;
2358 		}
2359 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
2360 		    acer_pci_intr);
2361 		if (cp->hw_ok == 0)
2362 			continue;
2363 		if (pciiide_chan_candisable(cp)) {
2364 			cr &= ~(PCIIDE_CHAN_EN(channel) << PCI_INTERFACE_SHIFT);
2365 			pci_conf_write(sc->sc_pc, sc->sc_tag,
2366 			    PCI_CLASS_REG, cr);
2367 		}
2368 		pciide_map_compat_intr(pa, cp, channel, interface);
2369 		acer_setup_channel(&cp->wdc_channel);
2370 	}
2371 }
2372 
2373 void
2374 acer_setup_channel(chp)
2375 	struct channel_softc *chp;
2376 {
2377 	struct ata_drive_datas *drvp;
2378 	int drive;
2379 	u_int32_t acer_fifo_udma;
2380 	u_int32_t idedma_ctl;
2381 	struct pciide_channel *cp = (struct pciide_channel*)chp;
2382 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
2383 
2384 	idedma_ctl = 0;
2385 	acer_fifo_udma = pci_conf_read(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA);
2386 	WDCDEBUG_PRINT(("acer_setup_channel: old fifo/udma reg 0x%x\n",
2387 	    acer_fifo_udma), DEBUG_PROBE);
2388 	/* setup DMA if needed */
2389 	pciide_channel_dma_setup(cp);
2390 
2391 	for (drive = 0; drive < 2; drive++) {
2392 		drvp = &chp->ch_drive[drive];
2393 		/* If no drive, skip */
2394 		if ((drvp->drive_flags & DRIVE) == 0)
2395 			continue;
2396 		WDCDEBUG_PRINT(("acer_setup_channel: old timings reg for "
2397 		    "channel %d drive %d 0x%x\n", chp->channel, drive,
2398 		    pciide_pci_read(sc->sc_pc, sc->sc_tag,
2399 		    ACER_IDETIM(chp->channel, drive))), DEBUG_PROBE);
2400 		/* clear FIFO/DMA mode */
2401 		acer_fifo_udma &= ~(ACER_FTH_OPL(chp->channel, drive, 0x3) |
2402 		    ACER_UDMA_EN(chp->channel, drive) |
2403 		    ACER_UDMA_TIM(chp->channel, drive, 0x7));
2404 
2405 		/* add timing values, setup DMA if needed */
2406 		if ((drvp->drive_flags & DRIVE_DMA) == 0 &&
2407 		    (drvp->drive_flags & DRIVE_UDMA) == 0) {
2408 			acer_fifo_udma |=
2409 			    ACER_FTH_OPL(chp->channel, drive, 0x1);
2410 			goto pio;
2411 		}
2412 
2413 		acer_fifo_udma |= ACER_FTH_OPL(chp->channel, drive, 0x2);
2414 		if (drvp->drive_flags & DRIVE_UDMA) {
2415 			/* use Ultra/DMA */
2416 			drvp->drive_flags &= ~DRIVE_DMA;
2417 			acer_fifo_udma |= ACER_UDMA_EN(chp->channel, drive);
2418 			acer_fifo_udma |=
2419 			    ACER_UDMA_TIM(chp->channel, drive,
2420 				acer_udma[drvp->UDMA_mode]);
2421 		} else {
2422 			/*
2423 			 * use Multiword DMA
2424 			 * Timings will be used for both PIO and DMA,
2425 			 * so adjust DMA mode if needed
2426 			 */
2427 			if (drvp->PIO_mode > (drvp->DMA_mode + 2))
2428 				drvp->PIO_mode = drvp->DMA_mode + 2;
2429 			if (drvp->DMA_mode + 2 > (drvp->PIO_mode))
2430 				drvp->DMA_mode = (drvp->PIO_mode > 2) ?
2431 				    drvp->PIO_mode - 2 : 0;
2432 			if (drvp->DMA_mode == 0)
2433 				drvp->PIO_mode = 0;
2434 		}
2435 		idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
2436 pio:		pciide_pci_write(sc->sc_pc, sc->sc_tag,
2437 		    ACER_IDETIM(chp->channel, drive),
2438 		    acer_pio[drvp->PIO_mode]);
2439 	}
2440 	WDCDEBUG_PRINT(("acer_setup_channel: new fifo/udma reg 0x%x\n",
2441 	    acer_fifo_udma), DEBUG_PROBE);
2442 	pci_conf_write(sc->sc_pc, sc->sc_tag, ACER_FTH_UDMA, acer_fifo_udma);
2443 	if (idedma_ctl != 0) {
2444 		/* Add software bits in status register */
2445 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
2446 		    IDEDMA_CTL, idedma_ctl);
2447 	}
2448 	pciide_print_modes(cp);
2449 }
2450 
2451 int
2452 acer_pci_intr(arg)
2453 	void *arg;
2454 {
2455 	struct pciide_softc *sc = arg;
2456 	struct pciide_channel *cp;
2457 	struct channel_softc *wdc_cp;
2458 	int i, rv, crv;
2459 	u_int32_t chids;
2460 
2461 	rv = 0;
2462 	chids = pciide_pci_read(sc->sc_pc, sc->sc_tag, ACER_CHIDS);
2463 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
2464 		cp = &sc->pciide_channels[i];
2465 		wdc_cp = &cp->wdc_channel;
2466 		/* If a compat channel skip. */
2467 		if (cp->compat)
2468 			continue;
2469 		if (chids & ACER_CHIDS_INT(i)) {
2470 			crv = wdcintr(wdc_cp);
2471 			if (crv == 0)
2472 				printf("%s:%d: bogus intr\n",
2473 				    sc->sc_wdcdev.sc_dev.dv_xname, i);
2474 			else
2475 				rv = 1;
2476 		}
2477 	}
2478 	return rv;
2479 }
2480 
2481 void
2482 pdc202xx_chip_map(sc, pa)
2483         struct pciide_softc *sc;
2484 	struct pci_attach_args *pa;
2485 {
2486 	struct pciide_channel *cp;
2487 	int channel;
2488 	pcireg_t interface, st, mode;
2489 	bus_size_t cmdsize, ctlsize;
2490 
2491 	st = pci_conf_read(sc->sc_pc, sc->sc_tag, PDC2xx_STATE);
2492 	WDCDEBUG_PRINT(("pdc202xx_setup_chip: controller state 0x%x\n", st),
2493 	    DEBUG_PROBE);
2494 	if (pciide_chipen(sc, pa) == 0)
2495 		return;
2496 
2497 	/* turn off  RAID mode */
2498 	st &= ~PDC2xx_STATE_IDERAID;
2499 
2500 	/*
2501 	 * can't rely on the PCI_CLASS_REG content if the chip was in raid
2502 	 * mode. We have to fake interface
2503 	 */
2504 	interface = PCIIDE_INTERFACE_SETTABLE(0) | PCIIDE_INTERFACE_SETTABLE(1);
2505 	if (st & PDC2xx_STATE_NATIVE)
2506 		interface |= PCIIDE_INTERFACE_PCI(0) | PCIIDE_INTERFACE_PCI(1);
2507 
2508 	printf("%s: bus-master DMA support present",
2509 	    sc->sc_wdcdev.sc_dev.dv_xname);
2510 	pciide_mapreg_dma(sc, pa);
2511 	printf("\n");
2512 	sc->sc_wdcdev.cap = WDC_CAPABILITY_DATA16 | WDC_CAPABILITY_DATA32 |
2513 	    WDC_CAPABILITY_MODE;
2514 	if (sc->sc_dma_ok)
2515 		sc->sc_wdcdev.cap |= WDC_CAPABILITY_DMA | WDC_CAPABILITY_UDMA;
2516 	sc->sc_wdcdev.PIO_cap = 4;
2517 	sc->sc_wdcdev.DMA_cap = 2;
2518 	if (sc->sc_pp->ide_product == PCI_PRODUCT_PROMISE_ULTRA66)
2519 		sc->sc_wdcdev.UDMA_cap = 4;
2520 	else
2521 		sc->sc_wdcdev.UDMA_cap = 2;
2522 	sc->sc_wdcdev.set_modes = pdc202xx_setup_channel;
2523 	sc->sc_wdcdev.channels = sc->wdc_chanarray;
2524 	sc->sc_wdcdev.nchannels = PCIIDE_NUM_CHANNELS;
2525 
2526 	/* setup failsafe defaults */
2527 	mode = 0;
2528 	mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[0]);
2529 	mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[0]);
2530 	mode = PDC2xx_TIM_SET_MB(mode, pdc2xx_dma_mb[0]);
2531 	mode = PDC2xx_TIM_SET_MC(mode, pdc2xx_dma_mc[0]);
2532 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
2533 		WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d drive 0 "
2534 		    "initial timings  0x%x, now 0x%x\n", channel,
2535 		    pci_conf_read(sc->sc_pc, sc->sc_tag,
2536 		    PDC2xx_TIM(channel, 0)), mode | PDC2xx_TIM_IORDYp),
2537 		    DEBUG_PROBE);
2538 		pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_TIM(channel, 0),
2539 		    mode | PDC2xx_TIM_IORDYp);
2540 		WDCDEBUG_PRINT(("pdc202xx_setup_chip: channel %d drive 1 "
2541 		    "initial timings  0x%x, now 0x%x\n", channel,
2542 		    pci_conf_read(sc->sc_pc, sc->sc_tag,
2543 		    PDC2xx_TIM(channel, 1)), mode), DEBUG_PROBE);
2544 		pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_TIM(channel, 1),
2545 		    mode);
2546 	}
2547 
2548 	mode = PDC2xx_SCR_DMA;
2549 	mode = PDC2xx_SCR_SET_GEN(mode, 0x1); /* the BIOS set it up this way */
2550 	mode = PDC2xx_SCR_SET_I2C(mode, 0x3); /* ditto */
2551 	mode = PDC2xx_SCR_SET_POLL(mode, 0x1); /* ditto */
2552 	WDCDEBUG_PRINT(("pdc202xx_setup_chip: initial SCR  0x%x, now 0x%x\n",
2553 	    bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR), mode),
2554 	    DEBUG_PROBE);
2555 	bus_space_write_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR, mode);
2556 
2557 	/* controller initial state register is OK even without BIOS */
2558 	/* The Linux driver does this */
2559 	mode = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM);
2560 	WDCDEBUG_PRINT(("pdc202xx_setup_chip: primary mode 0x%x", mode ),
2561 	    DEBUG_PROBE);
2562 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_PM,
2563 	    mode | 0x1);
2564 	mode = bus_space_read_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM);
2565 	WDCDEBUG_PRINT((", secondary mode 0x%x\n", mode ), DEBUG_PROBE);
2566 	bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SM,
2567 	    mode | 0x1);
2568 
2569 	for (channel = 0; channel < sc->sc_wdcdev.nchannels; channel++) {
2570 		cp = &sc->pciide_channels[channel];
2571 		if (pciide_chansetup(sc, channel, interface) == 0)
2572 			continue;
2573 		if ((st & PDC2xx_STATE_EN(channel)) == 0) {
2574 			printf("%s: %s channel ignored (disabled)\n",
2575 			    sc->sc_wdcdev.sc_dev.dv_xname, cp->name);
2576 			continue;
2577 		}
2578 		pciide_mapchan(pa, cp, interface, &cmdsize, &ctlsize,
2579 		    pdc202xx_pci_intr);
2580 		if (cp->hw_ok == 0)
2581 			continue;
2582 		if (pciiide_chan_candisable(cp))
2583 			st &= ~PDC2xx_STATE_EN(channel);
2584 		pciide_map_compat_intr(pa, cp, channel, interface);
2585 		pdc202xx_setup_channel(&cp->wdc_channel);
2586 	}
2587 	WDCDEBUG_PRINT(("pdc202xx_setup_chip: new controller state 0x%x\n", st),
2588 	    DEBUG_PROBE);
2589 	pci_conf_write(sc->sc_pc, sc->sc_tag, PDC2xx_STATE, st);
2590 	return;
2591 }
2592 
2593 void
2594 pdc202xx_setup_channel(chp)
2595 	struct channel_softc *chp;
2596 {
2597         struct ata_drive_datas *drvp;
2598 	int drive;
2599 	pcireg_t mode;
2600 	u_int32_t idedma_ctl;
2601 	struct pciide_channel *cp = (struct pciide_channel*)chp;
2602 	struct pciide_softc *sc = (struct pciide_softc *)cp->wdc_channel.wdc;
2603 
2604 	/* setup DMA if needed */
2605 	pciide_channel_dma_setup(cp);
2606 
2607 	idedma_ctl = 0;
2608 	for (drive = 0; drive < 2; drive++) {
2609 		drvp = &chp->ch_drive[drive];
2610 		/* If no drive, skip */
2611 		if ((drvp->drive_flags & DRIVE) == 0)
2612 			continue;
2613 		mode = PDC2xx_TIM_IORDY;
2614 		if (drvp->drive_flags & DRIVE_ATA)
2615 			mode |= PDC2xx_TIM_PRE;
2616 		if (drvp->drive_flags & DRIVE_UDMA) {
2617 			mode = PDC2xx_TIM_SET_MB(mode,
2618 			    pdc2xx_udma_mb[drvp->UDMA_mode]);
2619 			mode = PDC2xx_TIM_SET_MC(mode,
2620 			    pdc2xx_udma_mc[drvp->UDMA_mode]);
2621 			drvp->drive_flags &= ~DRIVE_DMA;
2622 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
2623 		} else if (drvp->drive_flags & DRIVE_DMA) {
2624 			mode = PDC2xx_TIM_SET_MB(mode,
2625 			    pdc2xx_dma_mb[drvp->DMA_mode]);
2626 			mode = PDC2xx_TIM_SET_MC(mode,
2627 			    pdc2xx_dma_mc[drvp->DMA_mode]);
2628 			idedma_ctl |= IDEDMA_CTL_DRV_DMA(drive);
2629 		} else {
2630 			mode = PDC2xx_TIM_SET_MB(mode,
2631 			    pdc2xx_dma_mb[0]);
2632 			mode = PDC2xx_TIM_SET_MC(mode,
2633 			    pdc2xx_dma_mc[0]);
2634 		}
2635 		mode = PDC2xx_TIM_SET_PA(mode, pdc2xx_pa[drvp->PIO_mode]);
2636 		mode = PDC2xx_TIM_SET_PB(mode, pdc2xx_pb[drvp->PIO_mode]);
2637 		mode |= PDC2xx_TIM_SYNC;
2638 		if (drvp->PIO_mode >= 3 &&(drvp->drive_flags & DRIVE_ATA))
2639 			mode |= PDC2xx_TIM_ERRDY;
2640 		if (drive == 0)
2641 			mode |= PDC2xx_TIM_IORDYp;
2642 		WDCDEBUG_PRINT(("pdc202xx_setup_channel: %s:%d:%d "
2643 		    "timings 0x%x\n",
2644 		    sc->sc_wdcdev.sc_dev.dv_xname,
2645 		    chp->channel, drive, mode), DEBUG_PROBE);
2646 		pci_conf_write(sc->sc_pc, sc->sc_tag,
2647 		    PDC2xx_TIM(chp->channel, drive), mode);
2648 	}
2649 	if (idedma_ctl != 0) {
2650 		/* Add software bits in status register */
2651 		bus_space_write_1(sc->sc_dma_iot, sc->sc_dma_ioh,
2652 		    IDEDMA_CTL, idedma_ctl);
2653 	}
2654 	pciide_print_modes(cp);
2655 }
2656 
2657 int
2658 pdc202xx_pci_intr(arg)
2659 	void *arg;
2660 {
2661 	struct pciide_softc *sc = arg;
2662 	struct pciide_channel *cp;
2663 	struct channel_softc *wdc_cp;
2664 	int i, rv, crv;
2665 	u_int32_t scr;
2666 
2667 	rv = 0;
2668 	scr = bus_space_read_4(sc->sc_dma_iot, sc->sc_dma_ioh, PDC2xx_SCR);
2669 	for (i = 0; i < sc->sc_wdcdev.nchannels; i++) {
2670 		cp = &sc->pciide_channels[i];
2671 		wdc_cp = &cp->wdc_channel;
2672 		/* If a compat channel skip. */
2673 		if (cp->compat)
2674 			continue;
2675 		if (scr & PDC2xx_SCR_INT(i)) {
2676 			crv = wdcintr(wdc_cp);
2677 			if (crv == 0)
2678 				printf("%s:%d: bogus intr\n",
2679 				    sc->sc_wdcdev.sc_dev.dv_xname, i);
2680 			else
2681 				rv = 1;
2682 		}
2683 	}
2684 	return rv;
2685 }
2686