1 /* $NetBSD: ixgbe_82598.c,v 1.15 2020/06/25 06:45:10 msaitoh Exp $ */ 2 3 /****************************************************************************** 4 SPDX-License-Identifier: BSD-3-Clause 5 6 Copyright (c) 2001-2017, Intel Corporation 7 All rights reserved. 8 9 Redistribution and use in source and binary forms, with or without 10 modification, are permitted provided that the following conditions are met: 11 12 1. Redistributions of source code must retain the above copyright notice, 13 this list of conditions and the following disclaimer. 14 15 2. Redistributions in binary form must reproduce the above copyright 16 notice, this list of conditions and the following disclaimer in the 17 documentation and/or other materials provided with the distribution. 18 19 3. Neither the name of the Intel Corporation nor the names of its 20 contributors may be used to endorse or promote products derived from 21 this software without specific prior written permission. 22 23 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 24 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 25 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 26 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 27 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 28 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 29 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 30 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 31 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 32 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 33 POSSIBILITY OF SUCH DAMAGE. 34 35 ******************************************************************************/ 36 /*$FreeBSD: head/sys/dev/ixgbe/ixgbe_82598.c 331224 2018-03-19 20:55:05Z erj $*/ 37 38 #include "ixgbe_type.h" 39 #include "ixgbe_82598.h" 40 #include "ixgbe_api.h" 41 #include "ixgbe_common.h" 42 #include "ixgbe_phy.h" 43 44 #define IXGBE_82598_MAX_TX_QUEUES 32 45 #define IXGBE_82598_MAX_RX_QUEUES 64 46 #define IXGBE_82598_RAR_ENTRIES 16 47 #define IXGBE_82598_MC_TBL_SIZE 128 48 #define IXGBE_82598_VFT_TBL_SIZE 128 49 #define IXGBE_82598_RX_PB_SIZE 512 50 51 static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, 52 ixgbe_link_speed *speed, 53 bool *autoneg); 54 static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw); 55 static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, 56 bool autoneg_wait_to_complete); 57 static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, 58 ixgbe_link_speed *speed, bool *link_up, 59 bool link_up_wait_to_complete); 60 static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, 61 ixgbe_link_speed speed, 62 bool autoneg_wait_to_complete); 63 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, 64 ixgbe_link_speed speed, 65 bool autoneg_wait_to_complete); 66 static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw); 67 static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq); 68 static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw); 69 static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, 70 u32 headroom, int strategy); 71 static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, 72 u8 *sff8472_data); 73 /** 74 * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout 75 * @hw: pointer to the HW structure 76 * 77 * The defaults for 82598 should be in the range of 50us to 50ms, 78 * however the hardware default for these parts is 500us to 1ms which is less 79 * than the 10ms recommended by the pci-e spec. To address this we need to 80 * increase the value to either 10ms to 250ms for capability version 1 config, 81 * or 16ms to 55ms for version 2. 82 **/ 83 void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) 84 { 85 u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR); 86 u16 pcie_devctl2; 87 88 /* only take action if timeout value is defaulted to 0 */ 89 if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK) 90 goto out; 91 92 /* 93 * if capabilities version is type 1 we can write the 94 * timeout of 10ms to 250ms through the GCR register 95 */ 96 if (!(gcr & IXGBE_GCR_CAP_VER2)) { 97 gcr |= IXGBE_GCR_CMPL_TMOUT_10ms; 98 goto out; 99 } 100 101 /* 102 * for version 2 capabilities we need to write the config space 103 * directly in order to set the completion timeout value for 104 * 16ms to 55ms 105 */ 106 pcie_devctl2 = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2); 107 pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms; 108 IXGBE_WRITE_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2); 109 out: 110 /* disable completion timeout resend */ 111 gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND; 112 IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr); 113 } 114 115 /** 116 * ixgbe_init_ops_82598 - Inits func ptrs and MAC type 117 * @hw: pointer to hardware structure 118 * 119 * Initialize the function pointers and assign the MAC type for 82598. 120 * Does not touch the hardware. 121 **/ 122 s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw) 123 { 124 struct ixgbe_mac_info *mac = &hw->mac; 125 struct ixgbe_phy_info *phy = &hw->phy; 126 s32 ret_val; 127 128 DEBUGFUNC("ixgbe_init_ops_82598"); 129 130 ret_val = ixgbe_init_phy_ops_generic(hw); 131 ret_val = ixgbe_init_ops_generic(hw); 132 133 /* PHY */ 134 phy->ops.init = ixgbe_init_phy_ops_82598; 135 136 /* MAC */ 137 mac->ops.start_hw = ixgbe_start_hw_82598; 138 mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_82598; 139 mac->ops.reset_hw = ixgbe_reset_hw_82598; 140 mac->ops.get_media_type = ixgbe_get_media_type_82598; 141 mac->ops.get_supported_physical_layer = 142 ixgbe_get_supported_physical_layer_82598; 143 mac->ops.read_analog_reg8 = ixgbe_read_analog_reg8_82598; 144 mac->ops.write_analog_reg8 = ixgbe_write_analog_reg8_82598; 145 mac->ops.set_lan_id = ixgbe_set_lan_id_multi_port_pcie_82598; 146 mac->ops.enable_rx_dma = ixgbe_enable_rx_dma_82598; 147 148 /* RAR, Multicast, VLAN */ 149 mac->ops.set_vmdq = ixgbe_set_vmdq_82598; 150 mac->ops.clear_vmdq = ixgbe_clear_vmdq_82598; 151 mac->ops.set_vfta = ixgbe_set_vfta_82598; 152 mac->ops.set_vlvf = NULL; 153 mac->ops.clear_vfta = ixgbe_clear_vfta_82598; 154 155 /* Flow Control */ 156 mac->ops.fc_enable = ixgbe_fc_enable_82598; 157 158 mac->mcft_size = IXGBE_82598_MC_TBL_SIZE; 159 mac->vft_size = IXGBE_82598_VFT_TBL_SIZE; 160 mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES; 161 mac->rx_pb_size = IXGBE_82598_RX_PB_SIZE; 162 mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES; 163 mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES; 164 mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); 165 166 /* SFP+ Module */ 167 phy->ops.read_i2c_eeprom = ixgbe_read_i2c_eeprom_82598; 168 phy->ops.read_i2c_sff8472 = ixgbe_read_i2c_sff8472_82598; 169 170 /* Link */ 171 mac->ops.check_link = ixgbe_check_mac_link_82598; 172 mac->ops.setup_link = ixgbe_setup_mac_link_82598; 173 mac->ops.flap_tx_laser = NULL; 174 mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_82598; 175 mac->ops.setup_rxpba = ixgbe_set_rxpba_82598; 176 177 /* Manageability interface */ 178 mac->ops.set_fw_drv_ver = NULL; 179 180 mac->ops.get_rtrup2tc = NULL; 181 182 return ret_val; 183 } 184 185 /** 186 * ixgbe_init_phy_ops_82598 - PHY/SFP specific init 187 * @hw: pointer to hardware structure 188 * 189 * Initialize any function pointers that were not able to be 190 * set during init_shared_code because the PHY/SFP type was 191 * not known. Perform the SFP init if necessary. 192 * 193 **/ 194 s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) 195 { 196 struct ixgbe_mac_info *mac = &hw->mac; 197 struct ixgbe_phy_info *phy = &hw->phy; 198 s32 ret_val = IXGBE_SUCCESS; 199 u16 list_offset, data_offset; 200 201 DEBUGFUNC("ixgbe_init_phy_ops_82598"); 202 203 /* Identify the PHY */ 204 phy->ops.identify(hw); 205 206 /* Overwrite the link function pointers if copper PHY */ 207 if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { 208 mac->ops.setup_link = ixgbe_setup_copper_link_82598; 209 mac->ops.get_link_capabilities = 210 ixgbe_get_copper_link_capabilities_generic; 211 } 212 213 switch (hw->phy.type) { 214 case ixgbe_phy_tn: 215 phy->ops.setup_link = ixgbe_setup_phy_link_tnx; 216 phy->ops.check_link = ixgbe_check_phy_link_tnx; 217 phy->ops.get_firmware_version = 218 ixgbe_get_phy_firmware_version_tnx; 219 break; 220 case ixgbe_phy_nl: 221 phy->ops.reset = ixgbe_reset_phy_nl; 222 223 /* Call SFP+ identify routine to get the SFP+ module type */ 224 ret_val = phy->ops.identify_sfp(hw); 225 if (ret_val != IXGBE_SUCCESS) 226 goto out; 227 else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) { 228 ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; 229 goto out; 230 } 231 232 /* Check to see if SFP+ module is supported */ 233 ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, 234 &list_offset, 235 &data_offset); 236 if (ret_val != IXGBE_SUCCESS) { 237 ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; 238 goto out; 239 } 240 break; 241 default: 242 break; 243 } 244 245 out: 246 return ret_val; 247 } 248 249 /** 250 * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx 251 * @hw: pointer to hardware structure 252 * 253 * Starts the hardware using the generic start_hw function. 254 * Disables relaxed ordering Then set pcie completion timeout 255 * 256 **/ 257 s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) 258 { 259 u32 regval; 260 u32 i; 261 s32 ret_val = IXGBE_SUCCESS; 262 263 DEBUGFUNC("ixgbe_start_hw_82598"); 264 265 ret_val = ixgbe_start_hw_generic(hw); 266 if (ret_val) 267 return ret_val; 268 269 /* Disable relaxed ordering */ 270 for (i = 0; ((i < hw->mac.max_tx_queues) && 271 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 272 regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); 273 regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN; 274 IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); 275 } 276 277 for (i = 0; ((i < hw->mac.max_rx_queues) && 278 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 279 regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); 280 regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN | 281 IXGBE_DCA_RXCTRL_HEAD_WRO_EN); 282 IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); 283 } 284 285 /* set the completion timeout for interface */ 286 ixgbe_set_pcie_completion_timeout(hw); 287 288 return ret_val; 289 } 290 291 /** 292 * ixgbe_get_link_capabilities_82598 - Determines link capabilities 293 * @hw: pointer to hardware structure 294 * @speed: pointer to link speed 295 * @autoneg: boolean auto-negotiation value 296 * 297 * Determines the link capabilities by reading the AUTOC register. 298 **/ 299 static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, 300 ixgbe_link_speed *speed, 301 bool *autoneg) 302 { 303 s32 status = IXGBE_SUCCESS; 304 u32 autoc = 0; 305 306 DEBUGFUNC("ixgbe_get_link_capabilities_82598"); 307 308 /* 309 * Determine link capabilities based on the stored value of AUTOC, 310 * which represents EEPROM defaults. If AUTOC value has not been 311 * stored, use the current register value. 312 */ 313 if (hw->mac.orig_link_settings_stored) 314 autoc = hw->mac.orig_autoc; 315 else 316 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 317 318 switch (autoc & IXGBE_AUTOC_LMS_MASK) { 319 case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: 320 *speed = IXGBE_LINK_SPEED_1GB_FULL; 321 *autoneg = FALSE; 322 break; 323 324 case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: 325 *speed = IXGBE_LINK_SPEED_10GB_FULL; 326 *autoneg = FALSE; 327 break; 328 329 case IXGBE_AUTOC_LMS_1G_AN: 330 *speed = IXGBE_LINK_SPEED_1GB_FULL; 331 *autoneg = TRUE; 332 break; 333 334 case IXGBE_AUTOC_LMS_KX4_AN: 335 case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: 336 *speed = IXGBE_LINK_SPEED_UNKNOWN; 337 if (autoc & IXGBE_AUTOC_KX4_SUPP) 338 *speed |= IXGBE_LINK_SPEED_10GB_FULL; 339 if (autoc & IXGBE_AUTOC_KX_SUPP) 340 *speed |= IXGBE_LINK_SPEED_1GB_FULL; 341 *autoneg = TRUE; 342 break; 343 344 default: 345 status = IXGBE_ERR_LINK_SETUP; 346 break; 347 } 348 349 return status; 350 } 351 352 /** 353 * ixgbe_get_media_type_82598 - Determines media type 354 * @hw: pointer to hardware structure 355 * 356 * Returns the media type (fiber, copper, backplane) 357 **/ 358 static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) 359 { 360 enum ixgbe_media_type media_type; 361 362 DEBUGFUNC("ixgbe_get_media_type_82598"); 363 364 /* Detect if there is a copper PHY attached. */ 365 switch (hw->phy.type) { 366 case ixgbe_phy_cu_unknown: 367 case ixgbe_phy_tn: 368 media_type = ixgbe_media_type_copper; 369 goto out; 370 default: 371 break; 372 } 373 374 /* Media type for I82598 is based on device ID */ 375 switch (hw->device_id) { 376 case IXGBE_DEV_ID_82598: 377 case IXGBE_DEV_ID_82598_BX: 378 /* Default device ID is mezzanine card KX/KX4 */ 379 media_type = ixgbe_media_type_backplane; 380 break; 381 case IXGBE_DEV_ID_82598AF_DUAL_PORT: 382 case IXGBE_DEV_ID_82598AF_SINGLE_PORT: 383 case IXGBE_DEV_ID_82598_DA_DUAL_PORT: 384 case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: 385 case IXGBE_DEV_ID_82598EB_XF_LR: 386 case IXGBE_DEV_ID_82598EB_SFP_LOM: 387 media_type = ixgbe_media_type_fiber; 388 break; 389 case IXGBE_DEV_ID_82598EB_CX4: 390 case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: 391 media_type = ixgbe_media_type_cx4; 392 break; 393 case IXGBE_DEV_ID_82598AT: 394 case IXGBE_DEV_ID_82598AT2: 395 media_type = ixgbe_media_type_copper; 396 break; 397 default: 398 media_type = ixgbe_media_type_unknown; 399 break; 400 } 401 out: 402 return media_type; 403 } 404 405 /** 406 * ixgbe_fc_enable_82598 - Enable flow control 407 * @hw: pointer to hardware structure 408 * 409 * Enable flow control according to the current settings. 410 **/ 411 s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw) 412 { 413 s32 ret_val = IXGBE_SUCCESS; 414 u32 fctrl_reg; 415 u32 rmcs_reg; 416 u32 reg; 417 u32 fcrtl, fcrth; 418 u32 link_speed = 0; 419 int i; 420 bool link_up; 421 422 DEBUGFUNC("ixgbe_fc_enable_82598"); 423 424 /* Validate the water mark configuration */ 425 if (!hw->fc.pause_time) { 426 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; 427 goto out; 428 } 429 430 /* Low water mark of zero causes XOFF floods */ 431 for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { 432 if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && 433 hw->fc.high_water[i]) { 434 if (!hw->fc.low_water[i] || 435 hw->fc.low_water[i] >= hw->fc.high_water[i]) { 436 DEBUGOUT("Invalid water mark configuration\n"); 437 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; 438 goto out; 439 } 440 } 441 } 442 443 /* 444 * On 82598 having Rx FC on causes resets while doing 1G 445 * so if it's on turn it off once we know link_speed. For 446 * more details see 82598 Specification update. 447 */ 448 hw->mac.ops.check_link(hw, &link_speed, &link_up, FALSE); 449 if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) { 450 switch (hw->fc.requested_mode) { 451 case ixgbe_fc_full: 452 hw->fc.requested_mode = ixgbe_fc_tx_pause; 453 break; 454 case ixgbe_fc_rx_pause: 455 hw->fc.requested_mode = ixgbe_fc_none; 456 break; 457 default: 458 /* no change */ 459 break; 460 } 461 } 462 463 /* Negotiate the fc mode to use */ 464 ixgbe_fc_autoneg(hw); 465 466 /* Disable any previous flow control settings */ 467 fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); 468 fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE); 469 470 rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS); 471 rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X); 472 473 /* 474 * The possible values of fc.current_mode are: 475 * 0: Flow control is completely disabled 476 * 1: Rx flow control is enabled (we can receive pause frames, 477 * but not send pause frames). 478 * 2: Tx flow control is enabled (we can send pause frames but 479 * we do not support receiving pause frames). 480 * 3: Both Rx and Tx flow control (symmetric) are enabled. 481 * other: Invalid. 482 */ 483 switch (hw->fc.current_mode) { 484 case ixgbe_fc_none: 485 /* 486 * Flow control is disabled by software override or autoneg. 487 * The code below will actually disable it in the HW. 488 */ 489 break; 490 case ixgbe_fc_rx_pause: 491 /* 492 * Rx Flow control is enabled and Tx Flow control is 493 * disabled by software override. Since there really 494 * isn't a way to advertise that we are capable of RX 495 * Pause ONLY, we will advertise that we support both 496 * symmetric and asymmetric Rx PAUSE. Later, we will 497 * disable the adapter's ability to send PAUSE frames. 498 */ 499 fctrl_reg |= IXGBE_FCTRL_RFCE; 500 break; 501 case ixgbe_fc_tx_pause: 502 /* 503 * Tx Flow control is enabled, and Rx Flow control is 504 * disabled by software override. 505 */ 506 rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; 507 break; 508 case ixgbe_fc_full: 509 /* Flow control (both Rx and Tx) is enabled by SW override. */ 510 fctrl_reg |= IXGBE_FCTRL_RFCE; 511 rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; 512 break; 513 default: 514 DEBUGOUT("Flow control param set incorrectly\n"); 515 ret_val = IXGBE_ERR_CONFIG; 516 goto out; 517 break; 518 } 519 520 /* Set 802.3x based flow control settings. */ 521 fctrl_reg |= IXGBE_FCTRL_DPF; 522 IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg); 523 IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); 524 525 /* Set up and enable Rx high/low water mark thresholds, enable XON. */ 526 for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { 527 if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && 528 hw->fc.high_water[i]) { 529 fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE; 530 fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN; 531 IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl); 532 IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth); 533 } else { 534 IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0); 535 IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0); 536 } 537 538 } 539 540 /* Configure pause time (2 TCs per register) */ 541 reg = (u32)hw->fc.pause_time * 0x00010001; 542 for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++) 543 IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); 544 545 /* Configure flow control refresh threshold value */ 546 IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); 547 548 out: 549 return ret_val; 550 } 551 552 /** 553 * ixgbe_start_mac_link_82598 - Configures MAC link settings 554 * @hw: pointer to hardware structure 555 * @autoneg_wait_to_complete: TRUE when waiting for completion is needed 556 * 557 * Configures link settings based on values in the ixgbe_hw struct. 558 * Restarts the link. Performs autonegotiation if needed. 559 **/ 560 static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, 561 bool autoneg_wait_to_complete) 562 { 563 u32 autoc_reg; 564 u32 links_reg; 565 u32 i; 566 s32 status = IXGBE_SUCCESS; 567 568 DEBUGFUNC("ixgbe_start_mac_link_82598"); 569 570 /* Restart link */ 571 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); 572 autoc_reg |= IXGBE_AUTOC_AN_RESTART; 573 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); 574 575 /* Only poll for autoneg to complete if specified to do so */ 576 if (autoneg_wait_to_complete) { 577 if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == 578 IXGBE_AUTOC_LMS_KX4_AN || 579 (autoc_reg & IXGBE_AUTOC_LMS_MASK) == 580 IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { 581 links_reg = 0; /* Just in case Autoneg time = 0 */ 582 for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { 583 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 584 if (links_reg & IXGBE_LINKS_KX_AN_COMP) 585 break; 586 msec_delay(100); 587 } 588 if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { 589 status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; 590 DEBUGOUT("Autonegotiation did not complete.\n"); 591 } 592 } 593 } 594 595 /* Add delay to filter out noises during initial link setup */ 596 msec_delay(50); 597 598 return status; 599 } 600 601 /** 602 * ixgbe_validate_link_ready - Function looks for phy link 603 * @hw: pointer to hardware structure 604 * 605 * Function indicates success when phy link is available. If phy is not ready 606 * within 5 seconds of MAC indicating link, the function returns error. 607 **/ 608 static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw) 609 { 610 u32 timeout; 611 u16 an_reg; 612 613 if (hw->device_id != IXGBE_DEV_ID_82598AT2) 614 return IXGBE_SUCCESS; 615 616 for (timeout = 0; 617 timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) { 618 hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, 619 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &an_reg); 620 621 if ((an_reg & IXGBE_MII_AUTONEG_COMPLETE) && 622 (an_reg & IXGBE_MII_AUTONEG_LINK_UP)) 623 break; 624 625 msec_delay(100); 626 } 627 628 if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) { 629 DEBUGOUT("Link was indicated but link is down\n"); 630 return IXGBE_ERR_LINK_SETUP; 631 } 632 633 return IXGBE_SUCCESS; 634 } 635 636 /** 637 * ixgbe_check_mac_link_82598 - Get link/speed status 638 * @hw: pointer to hardware structure 639 * @speed: pointer to link speed 640 * @link_up: TRUE is link is up, FALSE otherwise 641 * @link_up_wait_to_complete: bool used to wait for link up or not 642 * 643 * Reads the links register to determine if link is up and the current speed 644 **/ 645 static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, 646 ixgbe_link_speed *speed, bool *link_up, 647 bool link_up_wait_to_complete) 648 { 649 u32 links_reg; 650 u32 i; 651 u16 link_reg, adapt_comp_reg; 652 653 DEBUGFUNC("ixgbe_check_mac_link_82598"); 654 655 /* 656 * SERDES PHY requires us to read link status from undocumented 657 * register 0xC79F. Bit 0 set indicates link is up/ready; clear 658 * indicates link down. OxC00C is read to check that the XAUI lanes 659 * are active. Bit 0 clear indicates active; set indicates inactive. 660 */ 661 if (hw->phy.type == ixgbe_phy_nl) { 662 hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); 663 hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); 664 hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV, 665 &adapt_comp_reg); 666 if (link_up_wait_to_complete) { 667 for (i = 0; i < hw->mac.max_link_up_time; i++) { 668 if ((link_reg & 1) && 669 ((adapt_comp_reg & 1) == 0)) { 670 *link_up = TRUE; 671 break; 672 } else { 673 *link_up = FALSE; 674 } 675 msec_delay(100); 676 hw->phy.ops.read_reg(hw, 0xC79F, 677 IXGBE_TWINAX_DEV, 678 &link_reg); 679 hw->phy.ops.read_reg(hw, 0xC00C, 680 IXGBE_TWINAX_DEV, 681 &adapt_comp_reg); 682 } 683 } else { 684 if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0)) 685 *link_up = TRUE; 686 else 687 *link_up = FALSE; 688 } 689 690 if (*link_up == FALSE) 691 goto out; 692 } 693 694 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 695 if (link_up_wait_to_complete) { 696 for (i = 0; i < hw->mac.max_link_up_time; i++) { 697 if (links_reg & IXGBE_LINKS_UP) { 698 *link_up = TRUE; 699 break; 700 } else { 701 *link_up = FALSE; 702 } 703 msec_delay(100); 704 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 705 } 706 } else { 707 if (links_reg & IXGBE_LINKS_UP) 708 *link_up = TRUE; 709 else 710 *link_up = FALSE; 711 } 712 713 if (links_reg & IXGBE_LINKS_SPEED) 714 *speed = IXGBE_LINK_SPEED_10GB_FULL; 715 else 716 *speed = IXGBE_LINK_SPEED_1GB_FULL; 717 718 if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == TRUE) && 719 (ixgbe_validate_link_ready(hw) != IXGBE_SUCCESS)) 720 *link_up = FALSE; 721 722 out: 723 return IXGBE_SUCCESS; 724 } 725 726 /** 727 * ixgbe_setup_mac_link_82598 - Set MAC link speed 728 * @hw: pointer to hardware structure 729 * @speed: new link speed 730 * @autoneg_wait_to_complete: TRUE when waiting for completion is needed 731 * 732 * Set the link speed in the AUTOC register and restarts link. 733 **/ 734 static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, 735 ixgbe_link_speed speed, 736 bool autoneg_wait_to_complete) 737 { 738 bool autoneg = FALSE; 739 s32 status = IXGBE_SUCCESS; 740 ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; 741 u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 742 u32 autoc = curr_autoc; 743 u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; 744 745 DEBUGFUNC("ixgbe_setup_mac_link_82598"); 746 747 /* Check to see if speed passed in is supported. */ 748 ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg); 749 speed &= link_capabilities; 750 751 if (speed == IXGBE_LINK_SPEED_UNKNOWN) 752 status = IXGBE_ERR_LINK_SETUP; 753 754 /* Set KX4/KX support according to speed requested */ 755 else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN || 756 link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { 757 autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK; 758 if (speed & IXGBE_LINK_SPEED_10GB_FULL) 759 autoc |= IXGBE_AUTOC_KX4_SUPP; 760 if (speed & IXGBE_LINK_SPEED_1GB_FULL) 761 autoc |= IXGBE_AUTOC_KX_SUPP; 762 if (autoc != curr_autoc) 763 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); 764 } 765 766 if (status == IXGBE_SUCCESS) { 767 /* 768 * Setup and restart the link based on the new values in 769 * ixgbe_hw This will write the AUTOC register based on the new 770 * stored values 771 */ 772 status = ixgbe_start_mac_link_82598(hw, 773 autoneg_wait_to_complete); 774 } 775 776 return status; 777 } 778 779 780 /** 781 * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field 782 * @hw: pointer to hardware structure 783 * @speed: new link speed 784 * @autoneg_wait_to_complete: TRUE if waiting is needed to complete 785 * 786 * Sets the link speed in the AUTOC register in the MAC and restarts link. 787 **/ 788 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, 789 ixgbe_link_speed speed, 790 bool autoneg_wait_to_complete) 791 { 792 s32 status; 793 794 DEBUGFUNC("ixgbe_setup_copper_link_82598"); 795 796 /* Setup the PHY according to input speed */ 797 status = hw->phy.ops.setup_link_speed(hw, speed, 798 autoneg_wait_to_complete); 799 /* Set up MAC */ 800 ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); 801 802 return status; 803 } 804 805 /** 806 * ixgbe_reset_hw_82598 - Performs hardware reset 807 * @hw: pointer to hardware structure 808 * 809 * Resets the hardware by resetting the transmit and receive units, masks and 810 * clears all interrupts, performing a PHY reset, and performing a link (MAC) 811 * reset. 812 **/ 813 static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) 814 { 815 s32 status = IXGBE_SUCCESS; 816 s32 phy_status = IXGBE_SUCCESS; 817 u32 ctrl; 818 u32 gheccr; 819 u32 i; 820 u32 autoc; 821 u8 analog_val; 822 823 DEBUGFUNC("ixgbe_reset_hw_82598"); 824 825 /* Call adapter stop to disable tx/rx and clear interrupts */ 826 status = hw->mac.ops.stop_adapter(hw); 827 if (status != IXGBE_SUCCESS) 828 goto reset_hw_out; 829 830 /* 831 * Power up the Atlas Tx lanes if they are currently powered down. 832 * Atlas Tx lanes are powered down for MAC loopback tests, but 833 * they are not automatically restored on reset. 834 */ 835 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val); 836 if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) { 837 /* Enable Tx Atlas so packets can be transmitted again */ 838 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, 839 &analog_val); 840 analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN; 841 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, 842 analog_val); 843 844 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, 845 &analog_val); 846 analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL; 847 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, 848 analog_val); 849 850 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, 851 &analog_val); 852 analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL; 853 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, 854 analog_val); 855 856 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, 857 &analog_val); 858 analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL; 859 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, 860 analog_val); 861 } 862 863 /* Reset PHY */ 864 if (hw->phy.reset_disable == FALSE) { 865 /* PHY ops must be identified and initialized prior to reset */ 866 867 /* Init PHY and function pointers, perform SFP setup */ 868 phy_status = hw->phy.ops.init(hw); 869 if ((phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED) || 870 (phy_status == IXGBE_ERR_SFP_NOT_PRESENT)) 871 goto mac_reset_top; 872 873 hw->phy.ops.reset(hw); 874 } 875 876 mac_reset_top: 877 /* 878 * Issue global reset to the MAC. This needs to be a SW reset. 879 * If link reset is used, it might reset the MAC when mng is using it 880 */ 881 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST; 882 IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); 883 IXGBE_WRITE_FLUSH(hw); 884 885 /* Poll for reset bit to self-clear indicating reset is complete */ 886 for (i = 0; i < 10; i++) { 887 usec_delay(1); 888 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); 889 if (!(ctrl & IXGBE_CTRL_RST)) 890 break; 891 } 892 if (ctrl & IXGBE_CTRL_RST) { 893 status = IXGBE_ERR_RESET_FAILED; 894 DEBUGOUT("Reset polling failed to complete.\n"); 895 } 896 897 msec_delay(50); 898 899 /* 900 * Double resets are required for recovery from certain error 901 * conditions. Between resets, it is necessary to stall to allow time 902 * for any pending HW events to complete. 903 */ 904 if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { 905 hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; 906 goto mac_reset_top; 907 } 908 909 gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR); 910 gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6)); 911 IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr); 912 913 /* 914 * Store the original AUTOC value if it has not been 915 * stored off yet. Otherwise restore the stored original 916 * AUTOC value since the reset operation sets back to defaults. 917 */ 918 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 919 if (hw->mac.orig_link_settings_stored == FALSE) { 920 hw->mac.orig_autoc = autoc; 921 hw->mac.orig_link_settings_stored = TRUE; 922 } else if (autoc != hw->mac.orig_autoc) { 923 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc); 924 } 925 926 /* Store the permanent mac address */ 927 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); 928 929 /* 930 * Store MAC address from RAR0, clear receive address registers, and 931 * clear the multicast table 932 */ 933 hw->mac.ops.init_rx_addrs(hw); 934 935 reset_hw_out: 936 if (phy_status != IXGBE_SUCCESS) 937 status = phy_status; 938 939 return status; 940 } 941 942 /** 943 * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address 944 * @hw: pointer to hardware struct 945 * @rar: receive address register index to associate with a VMDq index 946 * @vmdq: VMDq set index 947 **/ 948 s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) 949 { 950 u32 rar_high; 951 u32 rar_entries = hw->mac.num_rar_entries; 952 953 DEBUGFUNC("ixgbe_set_vmdq_82598"); 954 955 /* Make sure we are using a valid rar index range */ 956 if (rar >= rar_entries) { 957 DEBUGOUT1("RAR index %d is out of range.\n", rar); 958 return IXGBE_ERR_INVALID_ARGUMENT; 959 } 960 961 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); 962 rar_high &= ~IXGBE_RAH_VIND_MASK; 963 rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK); 964 IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); 965 return IXGBE_SUCCESS; 966 } 967 968 /** 969 * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address 970 * @hw: pointer to hardware struct 971 * @rar: receive address register index to associate with a VMDq index 972 * @vmdq: VMDq clear index (not used in 82598, but elsewhere) 973 **/ 974 static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) 975 { 976 u32 rar_high; 977 u32 rar_entries = hw->mac.num_rar_entries; 978 979 UNREFERENCED_1PARAMETER(vmdq); 980 981 /* Make sure we are using a valid rar index range */ 982 if (rar >= rar_entries) { 983 DEBUGOUT1("RAR index %d is out of range.\n", rar); 984 return IXGBE_ERR_INVALID_ARGUMENT; 985 } 986 987 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); 988 if (rar_high & IXGBE_RAH_VIND_MASK) { 989 rar_high &= ~IXGBE_RAH_VIND_MASK; 990 IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); 991 } 992 993 return IXGBE_SUCCESS; 994 } 995 996 /** 997 * ixgbe_set_vfta_82598 - Set VLAN filter table 998 * @hw: pointer to hardware structure 999 * @vlan: VLAN id to write to VLAN filter 1000 * @vind: VMDq output index that maps queue to VLAN id in VFTA 1001 * @vlan_on: boolean flag to turn on/off VLAN in VFTA 1002 * @vlvf_bypass: boolean flag - unused 1003 * 1004 * Turn on/off specified VLAN in the VLAN filter table. 1005 **/ 1006 s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, 1007 bool vlan_on, bool vlvf_bypass) 1008 { 1009 u32 regindex; 1010 u32 bitindex; 1011 u32 bits; 1012 u32 vftabyte; 1013 1014 UNREFERENCED_1PARAMETER(vlvf_bypass); 1015 1016 DEBUGFUNC("ixgbe_set_vfta_82598"); 1017 1018 if (vlan > 4095) 1019 return IXGBE_ERR_PARAM; 1020 1021 /* Determine 32-bit word position in array */ 1022 regindex = (vlan >> 5) & 0x7F; /* upper seven bits */ 1023 1024 /* Determine the location of the (VMD) queue index */ 1025 vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */ 1026 bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */ 1027 1028 /* Set the nibble for VMD queue index */ 1029 bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex)); 1030 bits &= (~(0x0F << bitindex)); 1031 bits |= (vind << bitindex); 1032 IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits); 1033 1034 /* Determine the location of the bit for this VLAN id */ 1035 bitindex = vlan & 0x1F; /* lower five bits */ 1036 1037 bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); 1038 if (vlan_on) 1039 /* Turn on this VLAN id */ 1040 bits |= (1 << bitindex); 1041 else 1042 /* Turn off this VLAN id */ 1043 bits &= ~(1 << bitindex); 1044 IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); 1045 1046 return IXGBE_SUCCESS; 1047 } 1048 1049 /** 1050 * ixgbe_clear_vfta_82598 - Clear VLAN filter table 1051 * @hw: pointer to hardware structure 1052 * 1053 * Clears the VLAN filer table, and the VMDq index associated with the filter 1054 **/ 1055 static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) 1056 { 1057 u32 offset; 1058 u32 vlanbyte; 1059 1060 DEBUGFUNC("ixgbe_clear_vfta_82598"); 1061 1062 for (offset = 0; offset < hw->mac.vft_size; offset++) 1063 IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); 1064 1065 for (vlanbyte = 0; vlanbyte < 4; vlanbyte++) 1066 for (offset = 0; offset < hw->mac.vft_size; offset++) 1067 IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset), 1068 0); 1069 1070 return IXGBE_SUCCESS; 1071 } 1072 1073 /** 1074 * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register 1075 * @hw: pointer to hardware structure 1076 * @reg: analog register to read 1077 * @val: read value 1078 * 1079 * Performs read operation to Atlas analog register specified. 1080 **/ 1081 s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) 1082 { 1083 u32 atlas_ctl; 1084 1085 DEBUGFUNC("ixgbe_read_analog_reg8_82598"); 1086 1087 IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, 1088 IXGBE_ATLASCTL_WRITE_CMD | (reg << 8)); 1089 IXGBE_WRITE_FLUSH(hw); 1090 usec_delay(10); 1091 atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); 1092 *val = (u8)atlas_ctl; 1093 1094 return IXGBE_SUCCESS; 1095 } 1096 1097 /** 1098 * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register 1099 * @hw: pointer to hardware structure 1100 * @reg: atlas register to write 1101 * @val: value to write 1102 * 1103 * Performs write operation to Atlas analog register specified. 1104 **/ 1105 s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) 1106 { 1107 u32 atlas_ctl; 1108 1109 DEBUGFUNC("ixgbe_write_analog_reg8_82598"); 1110 1111 atlas_ctl = (reg << 8) | val; 1112 IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl); 1113 IXGBE_WRITE_FLUSH(hw); 1114 usec_delay(10); 1115 1116 return IXGBE_SUCCESS; 1117 } 1118 1119 /** 1120 * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface. 1121 * @hw: pointer to hardware structure 1122 * @dev_addr: address to read from 1123 * @byte_offset: byte offset to read from dev_addr 1124 * @eeprom_data: value read 1125 * 1126 * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. 1127 **/ 1128 static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, 1129 u8 byte_offset, u8 *eeprom_data) 1130 { 1131 s32 status = IXGBE_SUCCESS; 1132 u16 sfp_addr = 0; 1133 u16 sfp_data = 0; 1134 u16 sfp_stat = 0; 1135 u16 gssr; 1136 u32 i; 1137 1138 DEBUGFUNC("ixgbe_read_i2c_phy_82598"); 1139 1140 if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) 1141 gssr = IXGBE_GSSR_PHY1_SM; 1142 else 1143 gssr = IXGBE_GSSR_PHY0_SM; 1144 1145 if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS) 1146 return IXGBE_ERR_SWFW_SYNC; 1147 1148 if (hw->phy.type == ixgbe_phy_nl) { 1149 /* 1150 * NetLogic phy SDA/SCL registers are at addresses 0xC30A to 1151 * 0xC30D. These registers are used to talk to the SFP+ 1152 * module's EEPROM through the SDA/SCL (I2C) interface. 1153 */ 1154 sfp_addr = (dev_addr << 8) + byte_offset; 1155 sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); 1156 hw->phy.ops.write_reg_mdi(hw, 1157 IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, 1158 IXGBE_MDIO_PMA_PMD_DEV_TYPE, 1159 sfp_addr); 1160 1161 /* Poll status */ 1162 for (i = 0; i < 100; i++) { 1163 hw->phy.ops.read_reg_mdi(hw, 1164 IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, 1165 IXGBE_MDIO_PMA_PMD_DEV_TYPE, 1166 &sfp_stat); 1167 sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK; 1168 if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS) 1169 break; 1170 msec_delay(10); 1171 } 1172 1173 if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) { 1174 DEBUGOUT("EEPROM read did not pass.\n"); 1175 status = IXGBE_ERR_SFP_NOT_PRESENT; 1176 goto out; 1177 } 1178 1179 /* Read data */ 1180 hw->phy.ops.read_reg_mdi(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, 1181 IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data); 1182 1183 *eeprom_data = (u8)(sfp_data >> 8); 1184 } else { 1185 status = IXGBE_ERR_PHY; 1186 } 1187 1188 out: 1189 hw->mac.ops.release_swfw_sync(hw, gssr); 1190 return status; 1191 } 1192 1193 /** 1194 * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. 1195 * @hw: pointer to hardware structure 1196 * @byte_offset: EEPROM byte offset to read 1197 * @eeprom_data: value read 1198 * 1199 * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. 1200 **/ 1201 s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, 1202 u8 *eeprom_data) 1203 { 1204 return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR, 1205 byte_offset, eeprom_data); 1206 } 1207 1208 /** 1209 * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface. 1210 * @hw: pointer to hardware structure 1211 * @byte_offset: byte offset at address 0xA2 1212 * @sff8472_data: value read 1213 * 1214 * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C 1215 **/ 1216 static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, 1217 u8 *sff8472_data) 1218 { 1219 return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR2, 1220 byte_offset, sff8472_data); 1221 } 1222 1223 /** 1224 * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type 1225 * @hw: pointer to hardware structure 1226 * 1227 * Determines physical layer capabilities of the current configuration. 1228 **/ 1229 u64 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) 1230 { 1231 u64 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; 1232 u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 1233 u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; 1234 u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; 1235 u16 ext_ability = 0; 1236 1237 DEBUGFUNC("ixgbe_get_supported_physical_layer_82598"); 1238 1239 hw->phy.ops.identify(hw); 1240 1241 /* Copper PHY must be checked before AUTOC LMS to determine correct 1242 * physical layer because 10GBase-T PHYs use LMS = KX4/KX */ 1243 switch (hw->phy.type) { 1244 case ixgbe_phy_tn: 1245 case ixgbe_phy_cu_unknown: 1246 hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, 1247 IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); 1248 if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) 1249 physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; 1250 if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) 1251 physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; 1252 if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) 1253 physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; 1254 goto out; 1255 default: 1256 break; 1257 } 1258 1259 switch (autoc & IXGBE_AUTOC_LMS_MASK) { 1260 case IXGBE_AUTOC_LMS_1G_AN: 1261 case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: 1262 if (pma_pmd_1g == IXGBE_AUTOC_1G_KX) 1263 physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX; 1264 else 1265 physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX; 1266 break; 1267 case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: 1268 if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4) 1269 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; 1270 else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4) 1271 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; 1272 else /* XAUI */ 1273 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; 1274 break; 1275 case IXGBE_AUTOC_LMS_KX4_AN: 1276 case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: 1277 if (autoc & IXGBE_AUTOC_KX_SUPP) 1278 physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; 1279 if (autoc & IXGBE_AUTOC_KX4_SUPP) 1280 physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; 1281 break; 1282 default: 1283 break; 1284 } 1285 1286 if (hw->phy.type == ixgbe_phy_nl) { 1287 hw->phy.ops.identify_sfp(hw); 1288 1289 switch (hw->phy.sfp_type) { 1290 case ixgbe_sfp_type_da_cu: 1291 physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; 1292 break; 1293 case ixgbe_sfp_type_sr: 1294 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; 1295 break; 1296 case ixgbe_sfp_type_lr: 1297 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; 1298 break; 1299 default: 1300 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; 1301 break; 1302 } 1303 } 1304 1305 switch (hw->device_id) { 1306 case IXGBE_DEV_ID_82598_DA_DUAL_PORT: 1307 physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; 1308 break; 1309 case IXGBE_DEV_ID_82598AF_DUAL_PORT: 1310 case IXGBE_DEV_ID_82598AF_SINGLE_PORT: 1311 case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: 1312 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; 1313 break; 1314 case IXGBE_DEV_ID_82598EB_XF_LR: 1315 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; 1316 break; 1317 default: 1318 break; 1319 } 1320 1321 out: 1322 return physical_layer; 1323 } 1324 1325 /** 1326 * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple 1327 * port devices. 1328 * @hw: pointer to the HW structure 1329 * 1330 * Calls common function and corrects issue with some single port devices 1331 * that enable LAN1 but not LAN0. 1332 **/ 1333 void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw) 1334 { 1335 struct ixgbe_bus_info *bus = &hw->bus; 1336 u16 pci_gen = 0; 1337 u16 pci_ctrl2 = 0; 1338 1339 DEBUGFUNC("ixgbe_set_lan_id_multi_port_pcie_82598"); 1340 1341 ixgbe_set_lan_id_multi_port_pcie(hw); 1342 1343 /* check if LAN0 is disabled */ 1344 hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen); 1345 if ((pci_gen != 0) && (pci_gen != 0xFFFF)) { 1346 1347 hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2); 1348 1349 /* if LAN0 is completely disabled force function to 0 */ 1350 if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) && 1351 !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) && 1352 !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) { 1353 1354 bus->func = 0; 1355 } 1356 } 1357 } 1358 1359 /** 1360 * ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering 1361 * @hw: pointer to hardware structure 1362 * 1363 **/ 1364 void ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw *hw) 1365 { 1366 u32 regval; 1367 u32 i; 1368 1369 DEBUGFUNC("ixgbe_enable_relaxed_ordering_82598"); 1370 1371 /* Enable relaxed ordering */ 1372 for (i = 0; ((i < hw->mac.max_tx_queues) && 1373 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 1374 regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); 1375 regval |= IXGBE_DCA_TXCTRL_DESC_WRO_EN; 1376 IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); 1377 } 1378 1379 for (i = 0; ((i < hw->mac.max_rx_queues) && 1380 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 1381 regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); 1382 regval |= IXGBE_DCA_RXCTRL_DATA_WRO_EN | 1383 IXGBE_DCA_RXCTRL_HEAD_WRO_EN; 1384 IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); 1385 } 1386 1387 } 1388 1389 /** 1390 * ixgbe_set_rxpba_82598 - Initialize RX packet buffer 1391 * @hw: pointer to hardware structure 1392 * @num_pb: number of packet buffers to allocate 1393 * @headroom: reserve n KB of headroom 1394 * @strategy: packet buffer allocation strategy 1395 **/ 1396 static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, 1397 u32 headroom, int strategy) 1398 { 1399 u32 rxpktsize = IXGBE_RXPBSIZE_64KB; 1400 u8 i = 0; 1401 UNREFERENCED_1PARAMETER(headroom); 1402 1403 if (!num_pb) 1404 return; 1405 1406 /* Setup Rx packet buffer sizes */ 1407 switch (strategy) { 1408 case PBA_STRATEGY_WEIGHTED: 1409 /* Setup the first four at 80KB */ 1410 rxpktsize = IXGBE_RXPBSIZE_80KB; 1411 for (; i < 4; i++) 1412 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); 1413 /* Setup the last four at 48KB...don't re-init i */ 1414 rxpktsize = IXGBE_RXPBSIZE_48KB; 1415 /* Fall Through */ 1416 case PBA_STRATEGY_EQUAL: 1417 default: 1418 /* Divide the remaining Rx packet buffer evenly among the TCs */ 1419 for (; i < IXGBE_MAX_PACKET_BUFFERS; i++) 1420 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); 1421 break; 1422 } 1423 1424 /* Setup Tx packet buffer sizes */ 1425 for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) 1426 IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB); 1427 } 1428 1429 /** 1430 * ixgbe_enable_rx_dma_82598 - Enable the Rx DMA unit 1431 * @hw: pointer to hardware structure 1432 * @regval: register value to write to RXCTRL 1433 * 1434 * Enables the Rx DMA unit 1435 **/ 1436 s32 ixgbe_enable_rx_dma_82598(struct ixgbe_hw *hw, u32 regval) 1437 { 1438 DEBUGFUNC("ixgbe_enable_rx_dma_82598"); 1439 1440 IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); 1441 1442 return IXGBE_SUCCESS; 1443 } 1444