1 /* $NetBSD: if_ti.c,v 1.123 2022/05/23 13:53:37 rin Exp $ */ 2 3 /* 4 * Copyright (c) 1997, 1998, 1999 5 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 * 34 * FreeBSD Id: if_ti.c,v 1.15 1999/08/14 15:45:03 wpaul Exp 35 */ 36 37 /* 38 * Alteon Networks Tigon PCI gigabit ethernet driver for FreeBSD. 39 * Manuals, sample driver and firmware source kits are available 40 * from http://www.alteon.com/support/openkits. 41 * 42 * Written by Bill Paul <wpaul@ctr.columbia.edu> 43 * Electrical Engineering Department 44 * Columbia University, New York City 45 */ 46 47 /* 48 * The Alteon Networks Tigon chip contains an embedded R4000 CPU, 49 * gigabit MAC, dual DMA channels and a PCI interface unit. NICs 50 * using the Tigon may have anywhere from 512K to 2MB of SRAM. The 51 * Tigon supports hardware IP, TCP and UCP checksumming, multicast 52 * filtering and jumbo (9014 byte) frames. The hardware is largely 53 * controlled by firmware, which must be loaded into the NIC during 54 * initialization. 55 * 56 * The Tigon 2 contains 2 R4000 CPUs and requires a newer firmware 57 * revision, which supports new features such as extended commands, 58 * extended jumbo receive ring descriptors and a mini receive ring. 59 * 60 * Alteon Networks is to be commended for releasing such a vast amount 61 * of development material for the Tigon NIC without requiring an NDA 62 * (although they really should have done it a long time ago). With 63 * any luck, the other vendors will finally wise up and follow Alteon's 64 * stellar example. 65 * 66 * The firmware for the Tigon 1 and 2 NICs is compiled directly into 67 * this driver by #including it as a C header file. This bloats the 68 * driver somewhat, but it's the easiest method considering that the 69 * driver code and firmware code need to be kept in sync. The source 70 * for the firmware is not provided with the FreeBSD distribution since 71 * compiling it requires a GNU toolchain targeted for mips-sgi-irix5.3. 72 * 73 * The following people deserve special thanks: 74 * - Terry Murphy of 3Com, for providing a 3c985 Tigon 1 board 75 * for testing 76 * - Raymond Lee of Netgear, for providing a pair of Netgear 77 * GA620 Tigon 2 boards for testing 78 * - Ulf Zimmermann, for bringing the GA620 to my attention and 79 * convincing me to write this driver. 80 * - Andrew Gallatin for providing FreeBSD/Alpha support. 81 */ 82 83 #include <sys/cdefs.h> 84 __KERNEL_RCSID(0, "$NetBSD: if_ti.c,v 1.123 2022/05/23 13:53:37 rin Exp $"); 85 86 #include "opt_inet.h" 87 88 #include <sys/param.h> 89 #include <sys/systm.h> 90 #include <sys/sockio.h> 91 #include <sys/mbuf.h> 92 #include <sys/malloc.h> 93 #include <sys/kernel.h> 94 #include <sys/socket.h> 95 #include <sys/queue.h> 96 #include <sys/device.h> 97 #include <sys/reboot.h> 98 99 #include <net/if.h> 100 #include <net/if_arp.h> 101 #include <net/if_ether.h> 102 #include <net/if_dl.h> 103 #include <net/if_media.h> 104 105 #include <net/bpf.h> 106 107 #ifdef INET 108 #include <netinet/in.h> 109 #include <netinet/if_inarp.h> 110 #include <netinet/in_systm.h> 111 #include <netinet/ip.h> 112 #endif 113 114 115 #include <sys/bus.h> 116 117 #include <dev/pci/pcireg.h> 118 #include <dev/pci/pcivar.h> 119 #include <dev/pci/pcidevs.h> 120 121 #include <dev/pci/if_tireg.h> 122 123 #include <dev/microcode/tigon/ti_fw.h> 124 #include <dev/microcode/tigon/ti_fw2.h> 125 126 /* 127 * Various supported device vendors/types and their names. 128 */ 129 130 static const struct ti_type ti_devs[] = { 131 { PCI_VENDOR_ALTEON, PCI_PRODUCT_ALTEON_ACENIC, 132 "Alteon AceNIC 1000BASE-SX Ethernet" }, 133 { PCI_VENDOR_ALTEON, PCI_PRODUCT_ALTEON_ACENIC_COPPER, 134 "Alteon AceNIC 1000BASE-T Ethernet" }, 135 { PCI_VENDOR_3COM, PCI_PRODUCT_3COM_3C985, 136 "3Com 3c985-SX Gigabit Ethernet" }, 137 { PCI_VENDOR_NETGEAR, PCI_PRODUCT_NETGEAR_GA620, 138 "Netgear GA620 1000BASE-SX Ethernet" }, 139 { PCI_VENDOR_NETGEAR, PCI_PRODUCT_NETGEAR_GA620T, 140 "Netgear GA620 1000BASE-T Ethernet" }, 141 { PCI_VENDOR_SGI, PCI_PRODUCT_SGI_TIGON, 142 "Silicon Graphics Gigabit Ethernet" }, 143 { PCI_VENDOR_DEC, PCI_PRODUCT_DEC_PN9000SX, 144 "Farallon PN9000SX Gigabit Ethernet" }, 145 { 0, 0, NULL } 146 }; 147 148 static const struct ti_type *ti_type_match(struct pci_attach_args *); 149 static int ti_probe(device_t, cfdata_t, void *); 150 static void ti_attach(device_t, device_t, void *); 151 static bool ti_shutdown(device_t, int); 152 static void ti_txeof_tigon1(struct ti_softc *); 153 static void ti_txeof_tigon2(struct ti_softc *); 154 static void ti_rxeof(struct ti_softc *); 155 156 static void ti_stats_update(struct ti_softc *); 157 static int ti_encap_tigon1(struct ti_softc *, struct mbuf *, uint32_t *); 158 static int ti_encap_tigon2(struct ti_softc *, struct mbuf *, uint32_t *); 159 160 static int ti_intr(void *); 161 static void ti_start(struct ifnet *); 162 static int ti_ioctl(struct ifnet *, u_long, void *); 163 static void ti_init(void *); 164 static void ti_init2(struct ti_softc *); 165 static void ti_stop(struct ti_softc *); 166 static void ti_watchdog(struct ifnet *); 167 static int ti_ifmedia_upd(struct ifnet *); 168 static void ti_ifmedia_sts(struct ifnet *, struct ifmediareq *); 169 170 static uint32_t ti_eeprom_putbyte(struct ti_softc *, int); 171 static uint8_t ti_eeprom_getbyte(struct ti_softc *, int, uint8_t *); 172 static int ti_read_eeprom(struct ti_softc *, void *, int, int); 173 174 static void ti_add_mcast(struct ti_softc *, struct ether_addr *); 175 static void ti_del_mcast(struct ti_softc *, struct ether_addr *); 176 static void ti_setmulti(struct ti_softc *); 177 178 static void ti_mem(struct ti_softc *, uint32_t, uint32_t, const void *); 179 static void ti_loadfw(struct ti_softc *); 180 static void ti_cmd(struct ti_softc *, struct ti_cmd_desc *); 181 static void ti_cmd_ext(struct ti_softc *, struct ti_cmd_desc *, void *, int); 182 static void ti_handle_events(struct ti_softc *); 183 static int ti_alloc_jumbo_mem(struct ti_softc *); 184 static void *ti_jalloc(struct ti_softc *); 185 static void ti_jfree(struct mbuf *, void *, size_t, void *); 186 static int ti_newbuf_std(struct ti_softc *, int, struct mbuf *, bus_dmamap_t); 187 static int ti_newbuf_mini(struct ti_softc *, int, struct mbuf *, bus_dmamap_t); 188 static int ti_newbuf_jumbo(struct ti_softc *, int, struct mbuf *); 189 static int ti_init_rx_ring_std(struct ti_softc *); 190 static void ti_free_rx_ring_std(struct ti_softc *); 191 static int ti_init_rx_ring_jumbo(struct ti_softc *); 192 static void ti_free_rx_ring_jumbo(struct ti_softc *); 193 static int ti_init_rx_ring_mini(struct ti_softc *); 194 static void ti_free_rx_ring_mini(struct ti_softc *); 195 static void ti_free_tx_ring(struct ti_softc *); 196 static int ti_init_tx_ring(struct ti_softc *); 197 198 static int ti_64bitslot_war(struct ti_softc *); 199 static int ti_chipinit(struct ti_softc *); 200 static int ti_gibinit(struct ti_softc *); 201 202 static int ti_ether_ioctl(struct ifnet *, u_long, void *); 203 204 CFATTACH_DECL_NEW(ti, sizeof(struct ti_softc), 205 ti_probe, ti_attach, NULL, NULL); 206 207 /* 208 * Send an instruction or address to the EEPROM, check for ACK. 209 */ 210 static uint32_t 211 ti_eeprom_putbyte(struct ti_softc *sc, int byte) 212 { 213 int i, ack = 0; 214 215 /* 216 * Make sure we're in TX mode. 217 */ 218 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); 219 220 /* 221 * Feed in each bit and strobe the clock. 222 */ 223 for (i = 0x80; i; i >>= 1) { 224 if (byte & i) { 225 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); 226 } else { 227 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT); 228 } 229 DELAY(1); 230 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); 231 DELAY(1); 232 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); 233 } 234 235 /* 236 * Turn off TX mode. 237 */ 238 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); 239 240 /* 241 * Check for ack. 242 */ 243 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); 244 ack = CSR_READ_4(sc, TI_MISC_LOCAL_CTL) & TI_MLC_EE_DIN; 245 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); 246 247 return (ack); 248 } 249 250 /* 251 * Read a byte of data stored in the EEPROM at address 'addr.' 252 * We have to send two address bytes since the EEPROM can hold 253 * more than 256 bytes of data. 254 */ 255 static uint8_t 256 ti_eeprom_getbyte(struct ti_softc *sc, int addr, uint8_t *dest) 257 { 258 int i; 259 uint8_t byte = 0; 260 261 EEPROM_START(); 262 263 /* 264 * Send write control code to EEPROM. 265 */ 266 if (ti_eeprom_putbyte(sc, EEPROM_CTL_WRITE)) { 267 printf("%s: failed to send write command, status: %x\n", 268 device_xname(sc->sc_dev), CSR_READ_4(sc, TI_MISC_LOCAL_CTL)); 269 return (1); 270 } 271 272 /* 273 * Send first byte of address of byte we want to read. 274 */ 275 if (ti_eeprom_putbyte(sc, (addr >> 8) & 0xFF)) { 276 printf("%s: failed to send address, status: %x\n", 277 device_xname(sc->sc_dev), CSR_READ_4(sc, TI_MISC_LOCAL_CTL)); 278 return (1); 279 } 280 /* 281 * Send second byte address of byte we want to read. 282 */ 283 if (ti_eeprom_putbyte(sc, addr & 0xFF)) { 284 printf("%s: failed to send address, status: %x\n", 285 device_xname(sc->sc_dev), CSR_READ_4(sc, TI_MISC_LOCAL_CTL)); 286 return (1); 287 } 288 289 EEPROM_STOP(); 290 EEPROM_START(); 291 /* 292 * Send read control code to EEPROM. 293 */ 294 if (ti_eeprom_putbyte(sc, EEPROM_CTL_READ)) { 295 printf("%s: failed to send read command, status: %x\n", 296 device_xname(sc->sc_dev), CSR_READ_4(sc, TI_MISC_LOCAL_CTL)); 297 return (1); 298 } 299 300 /* 301 * Start reading bits from EEPROM. 302 */ 303 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN); 304 for (i = 0x80; i; i >>= 1) { 305 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); 306 DELAY(1); 307 if (CSR_READ_4(sc, TI_MISC_LOCAL_CTL) & TI_MLC_EE_DIN) 308 byte |= i; 309 TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK); 310 DELAY(1); 311 } 312 313 EEPROM_STOP(); 314 315 /* 316 * No ACK generated for read, so just return byte. 317 */ 318 319 *dest = byte; 320 321 return (0); 322 } 323 324 /* 325 * Read a sequence of bytes from the EEPROM. 326 */ 327 static int 328 ti_read_eeprom(struct ti_softc *sc, void *destv, int off, int cnt) 329 { 330 char *dest = destv; 331 int err = 0, i; 332 uint8_t byte = 0; 333 334 for (i = 0; i < cnt; i++) { 335 err = ti_eeprom_getbyte(sc, off + i, &byte); 336 if (err) 337 break; 338 *(dest + i) = byte; 339 } 340 341 return (err ? 1 : 0); 342 } 343 344 /* 345 * NIC memory access function. Can be used to either clear a section 346 * of NIC local memory or (if tbuf is non-NULL) copy data into it. 347 */ 348 static void 349 ti_mem(struct ti_softc *sc, uint32_t addr, uint32_t len, const void *xbuf) 350 { 351 int segptr, segsize, cnt; 352 const void *ptr; 353 354 segptr = addr; 355 cnt = len; 356 ptr = xbuf; 357 358 while (cnt) { 359 if (cnt < TI_WINLEN) 360 segsize = cnt; 361 else 362 segsize = TI_WINLEN - (segptr % TI_WINLEN); 363 CSR_WRITE_4(sc, TI_WINBASE, (segptr & ~(TI_WINLEN - 1))); 364 if (xbuf == NULL) { 365 bus_space_set_region_4(sc->ti_btag, sc->ti_bhandle, 366 TI_WINDOW + (segptr & (TI_WINLEN - 1)), 0, 367 segsize / 4); 368 } else { 369 #ifdef __BUS_SPACE_HAS_STREAM_METHODS 370 bus_space_write_region_stream_4(sc->ti_btag, 371 sc->ti_bhandle, 372 TI_WINDOW + (segptr & (TI_WINLEN - 1)), 373 (const uint32_t *)ptr, segsize / 4); 374 #else 375 bus_space_write_region_4(sc->ti_btag, sc->ti_bhandle, 376 TI_WINDOW + (segptr & (TI_WINLEN - 1)), 377 (const uint32_t *)ptr, segsize / 4); 378 #endif 379 ptr = (const char *)ptr + segsize; 380 } 381 segptr += segsize; 382 cnt -= segsize; 383 } 384 385 return; 386 } 387 388 /* 389 * Load firmware image into the NIC. Check that the firmware revision 390 * is acceptable and see if we want the firmware for the Tigon 1 or 391 * Tigon 2. 392 */ 393 static void 394 ti_loadfw(struct ti_softc *sc) 395 { 396 switch (sc->ti_hwrev) { 397 case TI_HWREV_TIGON: 398 if (tigonFwReleaseMajor != TI_FIRMWARE_MAJOR || 399 tigonFwReleaseMinor != TI_FIRMWARE_MINOR || 400 tigonFwReleaseFix != TI_FIRMWARE_FIX) { 401 printf("%s: firmware revision mismatch; want " 402 "%d.%d.%d, got %d.%d.%d\n", device_xname(sc->sc_dev), 403 TI_FIRMWARE_MAJOR, TI_FIRMWARE_MINOR, 404 TI_FIRMWARE_FIX, tigonFwReleaseMajor, 405 tigonFwReleaseMinor, tigonFwReleaseFix); 406 return; 407 } 408 ti_mem(sc, tigonFwTextAddr, tigonFwTextLen, tigonFwText); 409 ti_mem(sc, tigonFwDataAddr, tigonFwDataLen, tigonFwData); 410 ti_mem(sc, tigonFwRodataAddr, tigonFwRodataLen, tigonFwRodata); 411 ti_mem(sc, tigonFwBssAddr, tigonFwBssLen, NULL); 412 ti_mem(sc, tigonFwSbssAddr, tigonFwSbssLen, NULL); 413 CSR_WRITE_4(sc, TI_CPU_PROGRAM_COUNTER, tigonFwStartAddr); 414 break; 415 case TI_HWREV_TIGON_II: 416 if (tigon2FwReleaseMajor != TI_FIRMWARE_MAJOR || 417 tigon2FwReleaseMinor != TI_FIRMWARE_MINOR || 418 tigon2FwReleaseFix != TI_FIRMWARE_FIX) { 419 printf("%s: firmware revision mismatch; want " 420 "%d.%d.%d, got %d.%d.%d\n", device_xname(sc->sc_dev), 421 TI_FIRMWARE_MAJOR, TI_FIRMWARE_MINOR, 422 TI_FIRMWARE_FIX, tigon2FwReleaseMajor, 423 tigon2FwReleaseMinor, tigon2FwReleaseFix); 424 return; 425 } 426 ti_mem(sc, tigon2FwTextAddr, tigon2FwTextLen, tigon2FwText); 427 ti_mem(sc, tigon2FwDataAddr, tigon2FwDataLen, tigon2FwData); 428 ti_mem(sc, tigon2FwRodataAddr, tigon2FwRodataLen, 429 tigon2FwRodata); 430 ti_mem(sc, tigon2FwBssAddr, tigon2FwBssLen, NULL); 431 ti_mem(sc, tigon2FwSbssAddr, tigon2FwSbssLen, NULL); 432 CSR_WRITE_4(sc, TI_CPU_PROGRAM_COUNTER, tigon2FwStartAddr); 433 break; 434 default: 435 printf("%s: can't load firmware: unknown hardware rev\n", 436 device_xname(sc->sc_dev)); 437 break; 438 } 439 440 return; 441 } 442 443 /* 444 * Send the NIC a command via the command ring. 445 */ 446 static void 447 ti_cmd(struct ti_softc *sc, struct ti_cmd_desc *cmd) 448 { 449 uint32_t index; 450 451 index = sc->ti_cmd_saved_prodidx; 452 CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4), *(uint32_t *)(cmd)); 453 TI_INC(index, TI_CMD_RING_CNT); 454 CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, index); 455 sc->ti_cmd_saved_prodidx = index; 456 } 457 458 /* 459 * Send the NIC an extended command. The 'len' parameter specifies the 460 * number of command slots to include after the initial command. 461 */ 462 static void 463 ti_cmd_ext(struct ti_softc *sc, struct ti_cmd_desc *cmd, void *argv, int len) 464 { 465 char *arg = argv; 466 uint32_t index; 467 int i; 468 469 index = sc->ti_cmd_saved_prodidx; 470 CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4), *(uint32_t *)(cmd)); 471 TI_INC(index, TI_CMD_RING_CNT); 472 for (i = 0; i < len; i++) { 473 CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4), 474 *(uint32_t *)(&arg[i * 4])); 475 TI_INC(index, TI_CMD_RING_CNT); 476 } 477 CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, index); 478 sc->ti_cmd_saved_prodidx = index; 479 } 480 481 /* 482 * Handle events that have triggered interrupts. 483 */ 484 static void 485 ti_handle_events(struct ti_softc *sc) 486 { 487 struct ti_event_desc *e; 488 489 while (sc->ti_ev_saved_considx != sc->ti_ev_prodidx.ti_idx) { 490 e = &sc->ti_rdata->ti_event_ring[sc->ti_ev_saved_considx]; 491 switch (TI_EVENT_EVENT(e)) { 492 case TI_EV_LINKSTAT_CHANGED: 493 sc->ti_linkstat = TI_EVENT_CODE(e); 494 if (sc->ti_linkstat == TI_EV_CODE_LINK_UP) 495 printf("%s: 10/100 link up\n", 496 device_xname(sc->sc_dev)); 497 else if (sc->ti_linkstat == TI_EV_CODE_GIG_LINK_UP) 498 printf("%s: gigabit link up\n", 499 device_xname(sc->sc_dev)); 500 else if (sc->ti_linkstat == TI_EV_CODE_LINK_DOWN) 501 printf("%s: link down\n", 502 device_xname(sc->sc_dev)); 503 break; 504 case TI_EV_ERROR: 505 if (TI_EVENT_CODE(e) == TI_EV_CODE_ERR_INVAL_CMD) 506 printf("%s: invalid command\n", 507 device_xname(sc->sc_dev)); 508 else if (TI_EVENT_CODE(e) == TI_EV_CODE_ERR_UNIMP_CMD) 509 printf("%s: unknown command\n", 510 device_xname(sc->sc_dev)); 511 else if (TI_EVENT_CODE(e) == TI_EV_CODE_ERR_BADCFG) 512 printf("%s: bad config data\n", 513 device_xname(sc->sc_dev)); 514 break; 515 case TI_EV_FIRMWARE_UP: 516 ti_init2(sc); 517 break; 518 case TI_EV_STATS_UPDATED: 519 ti_stats_update(sc); 520 break; 521 case TI_EV_RESET_JUMBO_RING: 522 case TI_EV_MCAST_UPDATED: 523 /* Who cares. */ 524 break; 525 default: 526 printf("%s: unknown event: %d\n", 527 device_xname(sc->sc_dev), TI_EVENT_EVENT(e)); 528 break; 529 } 530 /* Advance the consumer index. */ 531 TI_INC(sc->ti_ev_saved_considx, TI_EVENT_RING_CNT); 532 CSR_WRITE_4(sc, TI_GCR_EVENTCONS_IDX, sc->ti_ev_saved_considx); 533 } 534 535 return; 536 } 537 538 /* 539 * Memory management for the jumbo receive ring is a pain in the 540 * butt. We need to allocate at least 9018 bytes of space per frame, 541 * _and_ it has to be contiguous (unless you use the extended 542 * jumbo descriptor format). Using malloc() all the time won't 543 * work: malloc() allocates memory in powers of two, which means we 544 * would end up wasting a considerable amount of space by allocating 545 * 9K chunks. We don't have a jumbo mbuf cluster pool. Thus, we have 546 * to do our own memory management. 547 * 548 * The driver needs to allocate a contiguous chunk of memory at boot 549 * time. We then chop this up ourselves into 9K pieces and use them 550 * as external mbuf storage. 551 * 552 * One issue here is how much memory to allocate. The jumbo ring has 553 * 256 slots in it, but at 9K per slot than can consume over 2MB of 554 * RAM. This is a bit much, especially considering we also need 555 * RAM for the standard ring and mini ring (on the Tigon 2). To 556 * save space, we only actually allocate enough memory for 64 slots 557 * by default, which works out to between 500 and 600K. This can 558 * be tuned by changing a #define in if_tireg.h. 559 */ 560 561 static int 562 ti_alloc_jumbo_mem(struct ti_softc *sc) 563 { 564 char *ptr; 565 int i; 566 struct ti_jpool_entry *entry; 567 bus_dma_segment_t dmaseg; 568 int error, dmanseg; 569 570 /* Grab a big chunk o' storage. */ 571 if ((error = bus_dmamem_alloc(sc->sc_dmat, 572 TI_JMEM, PAGE_SIZE, 0, &dmaseg, 1, &dmanseg, 573 BUS_DMA_NOWAIT)) != 0) { 574 aprint_error_dev(sc->sc_dev, 575 "can't allocate jumbo buffer, error = %d\n", error); 576 return (error); 577 } 578 579 if ((error = bus_dmamem_map(sc->sc_dmat, &dmaseg, dmanseg, 580 TI_JMEM, (void **)&sc->ti_cdata.ti_jumbo_buf, 581 BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) != 0) { 582 aprint_error_dev(sc->sc_dev, 583 "can't map jumbo buffer, error = %d\n", error); 584 return (error); 585 } 586 587 if ((error = bus_dmamap_create(sc->sc_dmat, 588 TI_JMEM, 1, 589 TI_JMEM, 0, BUS_DMA_NOWAIT, 590 &sc->jumbo_dmamap)) != 0) { 591 aprint_error_dev(sc->sc_dev, 592 "can't create jumbo buffer DMA map, error = %d\n", error); 593 return (error); 594 } 595 596 if ((error = bus_dmamap_load(sc->sc_dmat, sc->jumbo_dmamap, 597 sc->ti_cdata.ti_jumbo_buf, TI_JMEM, NULL, 598 BUS_DMA_NOWAIT)) != 0) { 599 aprint_error_dev(sc->sc_dev, 600 "can't load jumbo buffer DMA map, error = %d\n", error); 601 return (error); 602 } 603 sc->jumbo_dmaaddr = sc->jumbo_dmamap->dm_segs[0].ds_addr; 604 605 SIMPLEQ_INIT(&sc->ti_jfree_listhead); 606 SIMPLEQ_INIT(&sc->ti_jinuse_listhead); 607 608 /* 609 * Now divide it up into 9K pieces and save the addresses 610 * in an array. 611 */ 612 ptr = sc->ti_cdata.ti_jumbo_buf; 613 for (i = 0; i < TI_JSLOTS; i++) { 614 sc->ti_cdata.ti_jslots[i] = ptr; 615 ptr += TI_JLEN; 616 entry = malloc(sizeof(struct ti_jpool_entry), 617 M_DEVBUF, M_WAITOK); 618 entry->slot = i; 619 SIMPLEQ_INSERT_HEAD(&sc->ti_jfree_listhead, entry, 620 jpool_entries); 621 } 622 623 return (0); 624 } 625 626 /* 627 * Allocate a jumbo buffer. 628 */ 629 static void * 630 ti_jalloc(struct ti_softc *sc) 631 { 632 struct ti_jpool_entry *entry; 633 634 entry = SIMPLEQ_FIRST(&sc->ti_jfree_listhead); 635 636 if (entry == NULL) { 637 printf("%s: no free jumbo buffers\n", device_xname(sc->sc_dev)); 638 return (NULL); 639 } 640 641 SIMPLEQ_REMOVE_HEAD(&sc->ti_jfree_listhead, jpool_entries); 642 SIMPLEQ_INSERT_HEAD(&sc->ti_jinuse_listhead, entry, jpool_entries); 643 644 return (sc->ti_cdata.ti_jslots[entry->slot]); 645 } 646 647 /* 648 * Release a jumbo buffer. 649 */ 650 static void 651 ti_jfree(struct mbuf *m, void *tbuf, size_t size, void *arg) 652 { 653 struct ti_softc *sc; 654 int i, s; 655 struct ti_jpool_entry *entry; 656 657 /* Extract the softc struct pointer. */ 658 sc = (struct ti_softc *)arg; 659 660 if (sc == NULL) 661 panic("ti_jfree: didn't get softc pointer!"); 662 663 /* calculate the slot this buffer belongs to */ 664 665 i = ((char *)tbuf 666 - (char *)sc->ti_cdata.ti_jumbo_buf) / TI_JLEN; 667 668 if ((i < 0) || (i >= TI_JSLOTS)) 669 panic("ti_jfree: asked to free buffer that we don't manage!"); 670 671 s = splvm(); 672 entry = SIMPLEQ_FIRST(&sc->ti_jinuse_listhead); 673 if (entry == NULL) 674 panic("ti_jfree: buffer not in use!"); 675 entry->slot = i; 676 SIMPLEQ_REMOVE_HEAD(&sc->ti_jinuse_listhead, jpool_entries); 677 SIMPLEQ_INSERT_HEAD(&sc->ti_jfree_listhead, entry, jpool_entries); 678 679 if (__predict_true(m != NULL)) 680 pool_cache_put(mb_cache, m); 681 splx(s); 682 } 683 684 685 /* 686 * Initialize a standard receive ring descriptor. 687 */ 688 static int 689 ti_newbuf_std(struct ti_softc *sc, int i, struct mbuf *m, bus_dmamap_t dmamap) 690 { 691 struct mbuf *m_new = NULL; 692 struct ti_rx_desc *r; 693 int error; 694 695 if (dmamap == NULL) { 696 /* if (m) panic() */ 697 698 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, 699 MCLBYTES, 0, BUS_DMA_NOWAIT, 700 &dmamap)) != 0) { 701 aprint_error_dev(sc->sc_dev, 702 "can't create recv map, error = %d\n", error); 703 return (ENOMEM); 704 } 705 } 706 sc->std_dmamap[i] = dmamap; 707 708 if (m == NULL) { 709 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 710 if (m_new == NULL) { 711 aprint_error_dev(sc->sc_dev, 712 "mbuf allocation failed -- packet dropped!\n"); 713 return (ENOBUFS); 714 } 715 716 MCLGET(m_new, M_DONTWAIT); 717 if (!(m_new->m_flags & M_EXT)) { 718 aprint_error_dev(sc->sc_dev, 719 "cluster allocation failed -- packet dropped!\n"); 720 m_freem(m_new); 721 return (ENOBUFS); 722 } 723 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 724 m_adj(m_new, ETHER_ALIGN); 725 726 if ((error = bus_dmamap_load(sc->sc_dmat, dmamap, 727 mtod(m_new, void *), m_new->m_len, NULL, 728 BUS_DMA_READ | BUS_DMA_NOWAIT)) != 0) { 729 aprint_error_dev(sc->sc_dev, 730 "can't load recv map, error = %d\n", error); 731 m_freem(m_new); 732 return (ENOMEM); 733 } 734 } else { 735 m_new = m; 736 m_new->m_len = m_new->m_pkthdr.len = MCLBYTES; 737 m_new->m_data = m_new->m_ext.ext_buf; 738 m_adj(m_new, ETHER_ALIGN); 739 740 /* reuse the dmamap */ 741 } 742 743 sc->ti_cdata.ti_rx_std_chain[i] = m_new; 744 r = &sc->ti_rdata->ti_rx_std_ring[i]; 745 TI_HOSTADDR(r->ti_addr) = dmamap->dm_segs[0].ds_addr; 746 r->ti_type = TI_BDTYPE_RECV_BD; 747 r->ti_flags = 0; 748 if (sc->ethercom.ec_if.if_capenable & IFCAP_CSUM_IPv4_Rx) 749 r->ti_flags |= TI_BDFLAG_IP_CKSUM; 750 if (sc->ethercom.ec_if.if_capenable & 751 (IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Rx)) 752 r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM; 753 r->ti_len = m_new->m_len; /* == ds_len */ 754 r->ti_idx = i; 755 756 return (0); 757 } 758 759 /* 760 * Initialize a mini receive ring descriptor. This only applies to 761 * the Tigon 2. 762 */ 763 static int 764 ti_newbuf_mini(struct ti_softc *sc, int i, struct mbuf *m, bus_dmamap_t dmamap) 765 { 766 struct mbuf *m_new = NULL; 767 struct ti_rx_desc *r; 768 int error; 769 770 if (dmamap == NULL) { 771 /* if (m) panic() */ 772 773 if ((error = bus_dmamap_create(sc->sc_dmat, MHLEN, 1, 774 MHLEN, 0, BUS_DMA_NOWAIT, 775 &dmamap)) != 0) { 776 aprint_error_dev(sc->sc_dev, 777 "can't create recv map, error = %d\n", error); 778 return (ENOMEM); 779 } 780 } 781 sc->mini_dmamap[i] = dmamap; 782 783 if (m == NULL) { 784 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 785 if (m_new == NULL) { 786 aprint_error_dev(sc->sc_dev, 787 "mbuf allocation failed -- packet dropped!\n"); 788 return (ENOBUFS); 789 } 790 m_new->m_len = m_new->m_pkthdr.len = MHLEN; 791 m_adj(m_new, ETHER_ALIGN); 792 793 if ((error = bus_dmamap_load(sc->sc_dmat, dmamap, 794 mtod(m_new, void *), m_new->m_len, NULL, 795 BUS_DMA_READ | BUS_DMA_NOWAIT)) != 0) { 796 aprint_error_dev(sc->sc_dev, 797 "can't load recv map, error = %d\n", error); 798 m_freem(m_new); 799 return (ENOMEM); 800 } 801 } else { 802 m_new = m; 803 m_new->m_data = m_new->m_pktdat; 804 m_new->m_len = m_new->m_pkthdr.len = MHLEN; 805 m_adj(m_new, ETHER_ALIGN); 806 807 /* reuse the dmamap */ 808 } 809 810 r = &sc->ti_rdata->ti_rx_mini_ring[i]; 811 sc->ti_cdata.ti_rx_mini_chain[i] = m_new; 812 TI_HOSTADDR(r->ti_addr) = dmamap->dm_segs[0].ds_addr; 813 r->ti_type = TI_BDTYPE_RECV_BD; 814 r->ti_flags = TI_BDFLAG_MINI_RING; 815 if (sc->ethercom.ec_if.if_capenable & IFCAP_CSUM_IPv4_Rx) 816 r->ti_flags |= TI_BDFLAG_IP_CKSUM; 817 if (sc->ethercom.ec_if.if_capenable & 818 (IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Rx)) 819 r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM; 820 r->ti_len = m_new->m_len; /* == ds_len */ 821 r->ti_idx = i; 822 823 return (0); 824 } 825 826 /* 827 * Initialize a jumbo receive ring descriptor. This allocates 828 * a jumbo buffer from the pool managed internally by the driver. 829 */ 830 static int 831 ti_newbuf_jumbo(struct ti_softc *sc, int i, struct mbuf *m) 832 { 833 struct mbuf *m_new = NULL; 834 struct ti_rx_desc *r; 835 836 if (m == NULL) { 837 void * tbuf = NULL; 838 839 /* Allocate the mbuf. */ 840 MGETHDR(m_new, M_DONTWAIT, MT_DATA); 841 if (m_new == NULL) { 842 aprint_error_dev(sc->sc_dev, 843 "mbuf allocation failed -- packet dropped!\n"); 844 return (ENOBUFS); 845 } 846 847 /* Allocate the jumbo buffer */ 848 tbuf = ti_jalloc(sc); 849 if (tbuf == NULL) { 850 m_freem(m_new); 851 aprint_error_dev(sc->sc_dev, 852 "jumbo allocation failed -- packet dropped!\n"); 853 return (ENOBUFS); 854 } 855 856 /* Attach the buffer to the mbuf. */ 857 MEXTADD(m_new, tbuf, ETHER_MAX_LEN_JUMBO, 858 M_DEVBUF, ti_jfree, sc); 859 m_new->m_flags |= M_EXT_RW; 860 m_new->m_len = m_new->m_pkthdr.len = ETHER_MAX_LEN_JUMBO; 861 } else { 862 m_new = m; 863 m_new->m_data = m_new->m_ext.ext_buf; 864 m_new->m_ext.ext_size = ETHER_MAX_LEN_JUMBO; 865 } 866 867 m_adj(m_new, ETHER_ALIGN); 868 /* Set up the descriptor. */ 869 r = &sc->ti_rdata->ti_rx_jumbo_ring[i]; 870 sc->ti_cdata.ti_rx_jumbo_chain[i] = m_new; 871 TI_HOSTADDR(r->ti_addr) = sc->jumbo_dmaaddr + 872 (mtod(m_new, char *) - (char *)sc->ti_cdata.ti_jumbo_buf); 873 r->ti_type = TI_BDTYPE_RECV_JUMBO_BD; 874 r->ti_flags = TI_BDFLAG_JUMBO_RING; 875 if (sc->ethercom.ec_if.if_capenable & IFCAP_CSUM_IPv4_Rx) 876 r->ti_flags |= TI_BDFLAG_IP_CKSUM; 877 if (sc->ethercom.ec_if.if_capenable & 878 (IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Rx)) 879 r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM; 880 r->ti_len = m_new->m_len; 881 r->ti_idx = i; 882 883 return (0); 884 } 885 886 /* 887 * The standard receive ring has 512 entries in it. At 2K per mbuf cluster, 888 * that's 1MB or memory, which is a lot. For now, we fill only the first 889 * 256 ring entries and hope that our CPU is fast enough to keep up with 890 * the NIC. 891 */ 892 static int 893 ti_init_rx_ring_std(struct ti_softc *sc) 894 { 895 int i; 896 struct ti_cmd_desc cmd; 897 898 for (i = 0; i < TI_SSLOTS; i++) { 899 if (ti_newbuf_std(sc, i, NULL, 0) == ENOBUFS) 900 return (ENOBUFS); 901 } 902 903 TI_UPDATE_STDPROD(sc, i - 1); 904 sc->ti_std = i - 1; 905 906 return (0); 907 } 908 909 static void 910 ti_free_rx_ring_std(struct ti_softc *sc) 911 { 912 int i; 913 914 for (i = 0; i < TI_STD_RX_RING_CNT; i++) { 915 if (sc->ti_cdata.ti_rx_std_chain[i] != NULL) { 916 /* if (sc->std_dmamap[i] == 0) panic() */ 917 bus_dmamap_destroy(sc->sc_dmat, sc->std_dmamap[i]); 918 sc->std_dmamap[i] = 0; 919 920 m_freem(sc->ti_cdata.ti_rx_std_chain[i]); 921 sc->ti_cdata.ti_rx_std_chain[i] = NULL; 922 } 923 memset((char *)&sc->ti_rdata->ti_rx_std_ring[i], 0, 924 sizeof(struct ti_rx_desc)); 925 } 926 927 return; 928 } 929 930 static int 931 ti_init_rx_ring_jumbo(struct ti_softc *sc) 932 { 933 int i; 934 struct ti_cmd_desc cmd; 935 936 for (i = 0; i < TI_JUMBO_RX_RING_CNT; i++) { 937 if (ti_newbuf_jumbo(sc, i, NULL) == ENOBUFS) 938 return (ENOBUFS); 939 } 940 941 TI_UPDATE_JUMBOPROD(sc, i - 1); 942 sc->ti_jumbo = i - 1; 943 944 return (0); 945 } 946 947 static void 948 ti_free_rx_ring_jumbo(struct ti_softc *sc) 949 { 950 int i; 951 952 for (i = 0; i < TI_JUMBO_RX_RING_CNT; i++) { 953 if (sc->ti_cdata.ti_rx_jumbo_chain[i] != NULL) { 954 m_freem(sc->ti_cdata.ti_rx_jumbo_chain[i]); 955 sc->ti_cdata.ti_rx_jumbo_chain[i] = NULL; 956 } 957 memset((char *)&sc->ti_rdata->ti_rx_jumbo_ring[i], 0, 958 sizeof(struct ti_rx_desc)); 959 } 960 961 return; 962 } 963 964 static int 965 ti_init_rx_ring_mini(struct ti_softc *sc) 966 { 967 int i; 968 969 for (i = 0; i < TI_MSLOTS; i++) { 970 if (ti_newbuf_mini(sc, i, NULL, 0) == ENOBUFS) 971 return (ENOBUFS); 972 } 973 974 TI_UPDATE_MINIPROD(sc, i - 1); 975 sc->ti_mini = i - 1; 976 977 return (0); 978 } 979 980 static void 981 ti_free_rx_ring_mini(struct ti_softc *sc) 982 { 983 int i; 984 985 for (i = 0; i < TI_MINI_RX_RING_CNT; i++) { 986 if (sc->ti_cdata.ti_rx_mini_chain[i] != NULL) { 987 /* if (sc->mini_dmamap[i] == 0) panic() */ 988 bus_dmamap_destroy(sc->sc_dmat, sc->mini_dmamap[i]); 989 sc->mini_dmamap[i] = 0; 990 991 m_freem(sc->ti_cdata.ti_rx_mini_chain[i]); 992 sc->ti_cdata.ti_rx_mini_chain[i] = NULL; 993 } 994 memset((char *)&sc->ti_rdata->ti_rx_mini_ring[i], 0, 995 sizeof(struct ti_rx_desc)); 996 } 997 998 return; 999 } 1000 1001 static void 1002 ti_free_tx_ring(struct ti_softc *sc) 1003 { 1004 int i; 1005 struct txdmamap_pool_entry *dma; 1006 1007 for (i = 0; i < TI_TX_RING_CNT; i++) { 1008 if (sc->ti_cdata.ti_tx_chain[i] != NULL) { 1009 dma = sc->txdma[i]; 1010 KDASSERT(dma != NULL); 1011 bus_dmamap_sync(sc->sc_dmat, dma->dmamap, 0, 1012 dma->dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE); 1013 bus_dmamap_unload(sc->sc_dmat, dma->dmamap); 1014 1015 SIMPLEQ_INSERT_HEAD(&sc->txdma_list, sc->txdma[i], 1016 link); 1017 sc->txdma[i] = NULL; 1018 1019 m_freem(sc->ti_cdata.ti_tx_chain[i]); 1020 sc->ti_cdata.ti_tx_chain[i] = NULL; 1021 } 1022 memset((char *)&sc->ti_rdata->ti_tx_ring[i], 0, 1023 sizeof(struct ti_tx_desc)); 1024 } 1025 1026 while ((dma = SIMPLEQ_FIRST(&sc->txdma_list))) { 1027 SIMPLEQ_REMOVE_HEAD(&sc->txdma_list, link); 1028 bus_dmamap_destroy(sc->sc_dmat, dma->dmamap); 1029 free(dma, M_DEVBUF); 1030 } 1031 1032 return; 1033 } 1034 1035 static int 1036 ti_init_tx_ring(struct ti_softc *sc) 1037 { 1038 int i, error; 1039 bus_dmamap_t dmamap; 1040 struct txdmamap_pool_entry *dma; 1041 1042 sc->ti_txcnt = 0; 1043 sc->ti_tx_saved_considx = 0; 1044 CSR_WRITE_4(sc, TI_MB_SENDPROD_IDX, 0); 1045 1046 SIMPLEQ_INIT(&sc->txdma_list); 1047 for (i = 0; i < TI_RSLOTS; i++) { 1048 /* I've seen mbufs with 30 fragments. */ 1049 if ((error = bus_dmamap_create(sc->sc_dmat, 1050 ETHER_MAX_LEN_JUMBO, 40, ETHER_MAX_LEN_JUMBO, 0, 1051 BUS_DMA_NOWAIT, &dmamap)) != 0) { 1052 aprint_error_dev(sc->sc_dev, 1053 "can't create tx map, error = %d\n", error); 1054 return (ENOMEM); 1055 } 1056 dma = malloc(sizeof(*dma), M_DEVBUF, M_NOWAIT); 1057 if (!dma) { 1058 aprint_error_dev(sc->sc_dev, 1059 "can't alloc txdmamap_pool_entry\n"); 1060 bus_dmamap_destroy(sc->sc_dmat, dmamap); 1061 return (ENOMEM); 1062 } 1063 dma->dmamap = dmamap; 1064 SIMPLEQ_INSERT_HEAD(&sc->txdma_list, dma, link); 1065 } 1066 1067 return (0); 1068 } 1069 1070 /* 1071 * The Tigon 2 firmware has a new way to add/delete multicast addresses, 1072 * but we have to support the old way too so that Tigon 1 cards will 1073 * work. 1074 */ 1075 static void 1076 ti_add_mcast(struct ti_softc *sc, struct ether_addr *addr) 1077 { 1078 struct ti_cmd_desc cmd; 1079 uint16_t *m; 1080 uint32_t ext[2] = {0, 0}; 1081 1082 m = (uint16_t *)&addr->ether_addr_octet[0]; /* XXX */ 1083 1084 switch (sc->ti_hwrev) { 1085 case TI_HWREV_TIGON: 1086 CSR_WRITE_4(sc, TI_GCR_MAR0, htons(m[0])); 1087 CSR_WRITE_4(sc, TI_GCR_MAR1, (htons(m[1]) << 16) | htons(m[2])); 1088 TI_DO_CMD(TI_CMD_ADD_MCAST_ADDR, 0, 0); 1089 break; 1090 case TI_HWREV_TIGON_II: 1091 ext[0] = htons(m[0]); 1092 ext[1] = (htons(m[1]) << 16) | htons(m[2]); 1093 TI_DO_CMD_EXT(TI_CMD_EXT_ADD_MCAST, 0, 0, (void *)&ext, 2); 1094 break; 1095 default: 1096 printf("%s: unknown hwrev\n", device_xname(sc->sc_dev)); 1097 break; 1098 } 1099 1100 return; 1101 } 1102 1103 static void 1104 ti_del_mcast(struct ti_softc *sc, struct ether_addr *addr) 1105 { 1106 struct ti_cmd_desc cmd; 1107 uint16_t *m; 1108 uint32_t ext[2] = {0, 0}; 1109 1110 m = (uint16_t *)&addr->ether_addr_octet[0]; /* XXX */ 1111 1112 switch (sc->ti_hwrev) { 1113 case TI_HWREV_TIGON: 1114 CSR_WRITE_4(sc, TI_GCR_MAR0, htons(m[0])); 1115 CSR_WRITE_4(sc, TI_GCR_MAR1, (htons(m[1]) << 16) | htons(m[2])); 1116 TI_DO_CMD(TI_CMD_DEL_MCAST_ADDR, 0, 0); 1117 break; 1118 case TI_HWREV_TIGON_II: 1119 ext[0] = htons(m[0]); 1120 ext[1] = (htons(m[1]) << 16) | htons(m[2]); 1121 TI_DO_CMD_EXT(TI_CMD_EXT_DEL_MCAST, 0, 0, (void *)&ext, 2); 1122 break; 1123 default: 1124 printf("%s: unknown hwrev\n", device_xname(sc->sc_dev)); 1125 break; 1126 } 1127 1128 return; 1129 } 1130 1131 /* 1132 * Configure the Tigon's multicast address filter. 1133 * 1134 * The actual multicast table management is a bit of a pain, thanks to 1135 * slight brain damage on the part of both Alteon and us. With our 1136 * multicast code, we are only alerted when the multicast address table 1137 * changes and at that point we only have the current list of addresses: 1138 * we only know the current state, not the previous state, so we don't 1139 * actually know what addresses were removed or added. The firmware has 1140 * state, but we can't get our grubby mits on it, and there is no 'delete 1141 * all multicast addresses' command. Hence, we have to maintain our own 1142 * state so we know what addresses have been programmed into the NIC at 1143 * any given time. 1144 */ 1145 static void 1146 ti_setmulti(struct ti_softc *sc) 1147 { 1148 struct ethercom *ec = &sc->ethercom; 1149 struct ifnet *ifp = &ec->ec_if; 1150 struct ti_cmd_desc cmd; 1151 struct ti_mc_entry *mc; 1152 uint32_t intrs; 1153 struct ether_multi *enm; 1154 struct ether_multistep step; 1155 1156 /* Disable interrupts. */ 1157 intrs = CSR_READ_4(sc, TI_MB_HOSTINTR); 1158 CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1); 1159 1160 /* First, zot all the existing filters. */ 1161 while ((mc = SIMPLEQ_FIRST(&sc->ti_mc_listhead)) != NULL) { 1162 ti_del_mcast(sc, &mc->mc_addr); 1163 SIMPLEQ_REMOVE_HEAD(&sc->ti_mc_listhead, mc_entries); 1164 free(mc, M_DEVBUF); 1165 } 1166 1167 /* 1168 * Remember all multicast addresses so that we can delete them 1169 * later. Punt if there is a range of addresses or memory shortage. 1170 */ 1171 ETHER_LOCK(ec); 1172 ETHER_FIRST_MULTI(step, ec, enm); 1173 while (enm != NULL) { 1174 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, 1175 ETHER_ADDR_LEN) != 0) { 1176 ETHER_UNLOCK(ec); 1177 goto allmulti; 1178 } 1179 if ((mc = malloc(sizeof(struct ti_mc_entry), M_DEVBUF, 1180 M_NOWAIT)) == NULL) { 1181 ETHER_UNLOCK(ec); 1182 goto allmulti; 1183 } 1184 memcpy(&mc->mc_addr, enm->enm_addrlo, ETHER_ADDR_LEN); 1185 SIMPLEQ_INSERT_HEAD(&sc->ti_mc_listhead, mc, mc_entries); 1186 ETHER_NEXT_MULTI(step, enm); 1187 } 1188 ETHER_UNLOCK(ec); 1189 1190 /* Accept only programmed multicast addresses */ 1191 ifp->if_flags &= ~IFF_ALLMULTI; 1192 TI_DO_CMD(TI_CMD_SET_ALLMULTI, TI_CMD_CODE_ALLMULTI_DIS, 0); 1193 1194 /* Now program new ones. */ 1195 SIMPLEQ_FOREACH(mc, &sc->ti_mc_listhead, mc_entries) 1196 ti_add_mcast(sc, &mc->mc_addr); 1197 1198 /* Re-enable interrupts. */ 1199 CSR_WRITE_4(sc, TI_MB_HOSTINTR, intrs); 1200 1201 return; 1202 1203 allmulti: 1204 /* No need to keep individual multicast addresses */ 1205 while ((mc = SIMPLEQ_FIRST(&sc->ti_mc_listhead)) != NULL) { 1206 SIMPLEQ_REMOVE_HEAD(&sc->ti_mc_listhead, mc_entries); 1207 free(mc, M_DEVBUF); 1208 } 1209 1210 /* Accept all multicast addresses */ 1211 ifp->if_flags |= IFF_ALLMULTI; 1212 TI_DO_CMD(TI_CMD_SET_ALLMULTI, TI_CMD_CODE_ALLMULTI_ENB, 0); 1213 1214 /* Re-enable interrupts. */ 1215 CSR_WRITE_4(sc, TI_MB_HOSTINTR, intrs); 1216 } 1217 1218 /* 1219 * Check to see if the BIOS has configured us for a 64 bit slot when 1220 * we aren't actually in one. If we detect this condition, we can work 1221 * around it on the Tigon 2 by setting a bit in the PCI state register, 1222 * but for the Tigon 1 we must give up and abort the interface attach. 1223 */ 1224 static int 1225 ti_64bitslot_war(struct ti_softc *sc) 1226 { 1227 if (!(CSR_READ_4(sc, TI_PCI_STATE) & TI_PCISTATE_32BIT_BUS)) { 1228 CSR_WRITE_4(sc, 0x600, 0); 1229 CSR_WRITE_4(sc, 0x604, 0); 1230 CSR_WRITE_4(sc, 0x600, 0x5555AAAA); 1231 if (CSR_READ_4(sc, 0x604) == 0x5555AAAA) { 1232 if (sc->ti_hwrev == TI_HWREV_TIGON) 1233 return (EINVAL); 1234 else { 1235 TI_SETBIT(sc, TI_PCI_STATE, 1236 TI_PCISTATE_32BIT_BUS); 1237 return (0); 1238 } 1239 } 1240 } 1241 1242 return (0); 1243 } 1244 1245 /* 1246 * Do endian, PCI and DMA initialization. Also check the on-board ROM 1247 * self-test results. 1248 */ 1249 static int 1250 ti_chipinit(struct ti_softc *sc) 1251 { 1252 uint32_t cacheline; 1253 uint32_t pci_writemax = 0; 1254 uint32_t rev; 1255 1256 /* Initialize link to down state. */ 1257 sc->ti_linkstat = TI_EV_CODE_LINK_DOWN; 1258 1259 /* Set endianness before we access any non-PCI registers. */ 1260 #if BYTE_ORDER == BIG_ENDIAN 1261 CSR_WRITE_4(sc, TI_MISC_HOST_CTL, 1262 TI_MHC_BIGENDIAN_INIT | (TI_MHC_BIGENDIAN_INIT << 24)); 1263 #else 1264 CSR_WRITE_4(sc, TI_MISC_HOST_CTL, 1265 TI_MHC_LITTLEENDIAN_INIT | (TI_MHC_LITTLEENDIAN_INIT << 24)); 1266 #endif 1267 1268 /* Check the ROM failed bit to see if self-tests passed. */ 1269 if (CSR_READ_4(sc, TI_CPU_STATE) & TI_CPUSTATE_ROMFAIL) { 1270 printf("%s: board self-diagnostics failed!\n", 1271 device_xname(sc->sc_dev)); 1272 return (ENODEV); 1273 } 1274 1275 /* Halt the CPU. */ 1276 TI_SETBIT(sc, TI_CPU_STATE, TI_CPUSTATE_HALT); 1277 1278 /* Figure out the hardware revision. */ 1279 rev = CSR_READ_4(sc, TI_MISC_HOST_CTL) & TI_MHC_CHIP_REV_MASK; 1280 switch (rev) { 1281 case TI_REV_TIGON_I: 1282 sc->ti_hwrev = TI_HWREV_TIGON; 1283 break; 1284 case TI_REV_TIGON_II: 1285 sc->ti_hwrev = TI_HWREV_TIGON_II; 1286 break; 1287 default: 1288 printf("%s: unsupported chip revision 0x%x\n", 1289 device_xname(sc->sc_dev), rev); 1290 return (ENODEV); 1291 } 1292 1293 /* Do special setup for Tigon 2. */ 1294 if (sc->ti_hwrev == TI_HWREV_TIGON_II) { 1295 TI_SETBIT(sc, TI_CPU_CTL_B, TI_CPUSTATE_HALT); 1296 TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_SRAM_BANK_256K); 1297 TI_SETBIT(sc, TI_MISC_CONF, TI_MCR_SRAM_SYNCHRONOUS); 1298 } 1299 1300 /* Set up the PCI state register. */ 1301 CSR_WRITE_4(sc, TI_PCI_STATE, TI_PCI_READ_CMD | TI_PCI_WRITE_CMD); 1302 if (sc->ti_hwrev == TI_HWREV_TIGON_II) { 1303 TI_SETBIT(sc, TI_PCI_STATE, TI_PCISTATE_USE_MEM_RD_MULT); 1304 } 1305 1306 /* Clear the read/write max DMA parameters. */ 1307 TI_CLRBIT(sc, TI_PCI_STATE, 1308 (TI_PCISTATE_WRITE_MAXDMA | TI_PCISTATE_READ_MAXDMA)); 1309 1310 /* Get cache line size. */ 1311 cacheline = PCI_CACHELINE(CSR_READ_4(sc, PCI_BHLC_REG)); 1312 1313 /* 1314 * If the system has set enabled the PCI memory write 1315 * and invalidate command in the command register, set 1316 * the write max parameter accordingly. This is necessary 1317 * to use MWI with the Tigon 2. 1318 */ 1319 if (CSR_READ_4(sc, PCI_COMMAND_STATUS_REG) 1320 & PCI_COMMAND_INVALIDATE_ENABLE) { 1321 switch (cacheline) { 1322 case 1: 1323 case 4: 1324 case 8: 1325 case 16: 1326 case 32: 1327 case 64: 1328 break; 1329 default: 1330 /* Disable PCI memory write and invalidate. */ 1331 if (bootverbose) 1332 printf("%s: cache line size %d not " 1333 "supported; disabling PCI MWI\n", 1334 device_xname(sc->sc_dev), cacheline); 1335 CSR_WRITE_4(sc, PCI_COMMAND_STATUS_REG, 1336 CSR_READ_4(sc, PCI_COMMAND_STATUS_REG) 1337 & ~PCI_COMMAND_INVALIDATE_ENABLE); 1338 break; 1339 } 1340 } 1341 1342 #ifdef __brokenalpha__ 1343 /* 1344 * From the Alteon sample driver: 1345 * Must insure that we do not cross an 8K (bytes) boundary 1346 * for DMA reads. Our highest limit is 1K bytes. This is a 1347 * restriction on some ALPHA platforms with early revision 1348 * 21174 PCI chipsets, such as the AlphaPC 164lx 1349 */ 1350 TI_SETBIT(sc, TI_PCI_STATE, pci_writemax | TI_PCI_READMAX_1024); 1351 #else 1352 TI_SETBIT(sc, TI_PCI_STATE, pci_writemax); 1353 #endif 1354 1355 /* This sets the min dma param all the way up (0xff). */ 1356 TI_SETBIT(sc, TI_PCI_STATE, TI_PCISTATE_MINDMA); 1357 1358 /* Configure DMA variables. */ 1359 #if BYTE_ORDER == BIG_ENDIAN 1360 CSR_WRITE_4(sc, TI_GCR_OPMODE, TI_OPMODE_BYTESWAP_BD | 1361 TI_OPMODE_BYTESWAP_DATA | TI_OPMODE_WORDSWAP_BD | 1362 TI_OPMODE_WARN_ENB | TI_OPMODE_FATAL_ENB | 1363 TI_OPMODE_DONT_FRAG_JUMBO); 1364 #else 1365 CSR_WRITE_4(sc, TI_GCR_OPMODE, TI_OPMODE_BYTESWAP_DATA | 1366 TI_OPMODE_WORDSWAP_BD | TI_OPMODE_DONT_FRAG_JUMBO | 1367 TI_OPMODE_WARN_ENB | TI_OPMODE_FATAL_ENB); 1368 #endif 1369 1370 /* 1371 * Only allow 1 DMA channel to be active at a time. 1372 * I don't think this is a good idea, but without it 1373 * the firmware racks up lots of nicDmaReadRingFull 1374 * errors. 1375 * Incompatible with hardware assisted checksums. 1376 */ 1377 if ((sc->ethercom.ec_if.if_capenable & 1378 (IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_TCPv4_Rx | 1379 IFCAP_CSUM_UDPv4_Tx | IFCAP_CSUM_UDPv4_Rx | 1380 IFCAP_CSUM_IPv4_Tx | IFCAP_CSUM_IPv4_Rx)) == 0) 1381 TI_SETBIT(sc, TI_GCR_OPMODE, TI_OPMODE_1_DMA_ACTIVE); 1382 1383 /* Recommended settings from Tigon manual. */ 1384 CSR_WRITE_4(sc, TI_GCR_DMA_WRITECFG, TI_DMA_STATE_THRESH_8W); 1385 CSR_WRITE_4(sc, TI_GCR_DMA_READCFG, TI_DMA_STATE_THRESH_8W); 1386 1387 if (ti_64bitslot_war(sc)) { 1388 printf("%s: bios thinks we're in a 64 bit slot, " 1389 "but we aren't", device_xname(sc->sc_dev)); 1390 return (EINVAL); 1391 } 1392 1393 return (0); 1394 } 1395 1396 /* 1397 * Initialize the general information block and firmware, and 1398 * start the CPU(s) running. 1399 */ 1400 static int 1401 ti_gibinit(struct ti_softc *sc) 1402 { 1403 struct ti_rcb *rcb; 1404 int i; 1405 struct ifnet *ifp; 1406 1407 ifp = &sc->ethercom.ec_if; 1408 1409 /* Disable interrupts for now. */ 1410 CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1); 1411 1412 /* Tell the chip where to find the general information block. */ 1413 CSR_WRITE_4(sc, TI_GCR_GENINFO_HI, 0); 1414 CSR_WRITE_4(sc, TI_GCR_GENINFO_LO, TI_CDGIBADDR(sc)); 1415 1416 /* Load the firmware into SRAM. */ 1417 ti_loadfw(sc); 1418 1419 /* Set up the contents of the general info and ring control blocks. */ 1420 1421 /* Set up the event ring and producer pointer. */ 1422 rcb = &sc->ti_rdata->ti_info.ti_ev_rcb; 1423 1424 TI_HOSTADDR(rcb->ti_hostaddr) = TI_CDEVENTADDR(sc, 0); 1425 rcb->ti_flags = 0; 1426 TI_HOSTADDR(sc->ti_rdata->ti_info.ti_ev_prodidx_ptr) = 1427 TI_CDEVPRODADDR(sc); 1428 1429 sc->ti_ev_prodidx.ti_idx = 0; 1430 CSR_WRITE_4(sc, TI_GCR_EVENTCONS_IDX, 0); 1431 sc->ti_ev_saved_considx = 0; 1432 1433 /* Set up the command ring and producer mailbox. */ 1434 rcb = &sc->ti_rdata->ti_info.ti_cmd_rcb; 1435 1436 TI_HOSTADDR(rcb->ti_hostaddr) = TI_GCR_NIC_ADDR(TI_GCR_CMDRING); 1437 rcb->ti_flags = 0; 1438 rcb->ti_max_len = 0; 1439 for (i = 0; i < TI_CMD_RING_CNT; i++) { 1440 CSR_WRITE_4(sc, TI_GCR_CMDRING + (i * 4), 0); 1441 } 1442 CSR_WRITE_4(sc, TI_GCR_CMDCONS_IDX, 0); 1443 CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, 0); 1444 sc->ti_cmd_saved_prodidx = 0; 1445 1446 /* 1447 * Assign the address of the stats refresh buffer. 1448 * We re-use the current stats buffer for this to 1449 * conserve memory. 1450 */ 1451 TI_HOSTADDR(sc->ti_rdata->ti_info.ti_refresh_stats_ptr) = 1452 TI_CDSTATSADDR(sc); 1453 1454 /* Set up the standard receive ring. */ 1455 rcb = &sc->ti_rdata->ti_info.ti_std_rx_rcb; 1456 TI_HOSTADDR(rcb->ti_hostaddr) = TI_CDRXSTDADDR(sc, 0); 1457 rcb->ti_max_len = ETHER_MAX_LEN; 1458 rcb->ti_flags = 0; 1459 if (ifp->if_capenable & IFCAP_CSUM_IPv4_Rx) 1460 rcb->ti_flags |= TI_RCB_FLAG_IP_CKSUM; 1461 if (ifp->if_capenable & (IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Rx)) 1462 rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM; 1463 if (VLAN_ATTACHED(&sc->ethercom)) 1464 rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST; 1465 1466 /* Set up the jumbo receive ring. */ 1467 rcb = &sc->ti_rdata->ti_info.ti_jumbo_rx_rcb; 1468 TI_HOSTADDR(rcb->ti_hostaddr) = TI_CDRXJUMBOADDR(sc, 0); 1469 rcb->ti_max_len = ETHER_MAX_LEN_JUMBO; 1470 rcb->ti_flags = 0; 1471 if (ifp->if_capenable & IFCAP_CSUM_IPv4_Rx) 1472 rcb->ti_flags |= TI_RCB_FLAG_IP_CKSUM; 1473 if (ifp->if_capenable & (IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Rx)) 1474 rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM; 1475 if (VLAN_ATTACHED(&sc->ethercom)) 1476 rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST; 1477 1478 /* 1479 * Set up the mini ring. Only activated on the 1480 * Tigon 2 but the slot in the config block is 1481 * still there on the Tigon 1. 1482 */ 1483 rcb = &sc->ti_rdata->ti_info.ti_mini_rx_rcb; 1484 TI_HOSTADDR(rcb->ti_hostaddr) = TI_CDRXMINIADDR(sc, 0); 1485 rcb->ti_max_len = MHLEN - ETHER_ALIGN; 1486 if (sc->ti_hwrev == TI_HWREV_TIGON) 1487 rcb->ti_flags = TI_RCB_FLAG_RING_DISABLED; 1488 else 1489 rcb->ti_flags = 0; 1490 if (ifp->if_capenable & IFCAP_CSUM_IPv4_Rx) 1491 rcb->ti_flags |= TI_RCB_FLAG_IP_CKSUM; 1492 if (ifp->if_capenable & (IFCAP_CSUM_TCPv4_Rx | IFCAP_CSUM_UDPv4_Rx)) 1493 rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM; 1494 if (VLAN_ATTACHED(&sc->ethercom)) 1495 rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST; 1496 1497 /* 1498 * Set up the receive return ring. 1499 */ 1500 rcb = &sc->ti_rdata->ti_info.ti_return_rcb; 1501 TI_HOSTADDR(rcb->ti_hostaddr) = TI_CDRXRTNADDR(sc, 0); 1502 rcb->ti_flags = 0; 1503 rcb->ti_max_len = TI_RETURN_RING_CNT; 1504 TI_HOSTADDR(sc->ti_rdata->ti_info.ti_return_prodidx_ptr) = 1505 TI_CDRTNPRODADDR(sc); 1506 1507 /* 1508 * Set up the tx ring. Note: for the Tigon 2, we have the option 1509 * of putting the transmit ring in the host's address space and 1510 * letting the chip DMA it instead of leaving the ring in the NIC's 1511 * memory and accessing it through the shared memory region. We 1512 * do this for the Tigon 2, but it doesn't work on the Tigon 1, 1513 * so we have to revert to the shared memory scheme if we detect 1514 * a Tigon 1 chip. 1515 */ 1516 CSR_WRITE_4(sc, TI_WINBASE, TI_TX_RING_BASE); 1517 if (sc->ti_hwrev == TI_HWREV_TIGON) { 1518 sc->ti_tx_ring_nic = 1519 (struct ti_tx_desc *)(sc->ti_vhandle + TI_WINDOW); 1520 } 1521 memset((char *)sc->ti_rdata->ti_tx_ring, 0, 1522 TI_TX_RING_CNT * sizeof(struct ti_tx_desc)); 1523 rcb = &sc->ti_rdata->ti_info.ti_tx_rcb; 1524 if (sc->ti_hwrev == TI_HWREV_TIGON) 1525 rcb->ti_flags = 0; 1526 else 1527 rcb->ti_flags = TI_RCB_FLAG_HOST_RING; 1528 if (ifp->if_capenable & IFCAP_CSUM_IPv4_Tx) 1529 rcb->ti_flags |= TI_RCB_FLAG_IP_CKSUM; 1530 /* 1531 * When we get the packet, there is a pseudo-header seed already 1532 * in the th_sum or uh_sum field. Make sure the firmware doesn't 1533 * compute the pseudo-header checksum again! 1534 */ 1535 if (ifp->if_capenable & (IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_UDPv4_Tx)) 1536 rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM | 1537 TI_RCB_FLAG_NO_PHDR_CKSUM; 1538 if (VLAN_ATTACHED(&sc->ethercom)) 1539 rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST; 1540 rcb->ti_max_len = TI_TX_RING_CNT; 1541 if (sc->ti_hwrev == TI_HWREV_TIGON) 1542 TI_HOSTADDR(rcb->ti_hostaddr) = TI_TX_RING_BASE; 1543 else 1544 TI_HOSTADDR(rcb->ti_hostaddr) = TI_CDTXADDR(sc, 0); 1545 TI_HOSTADDR(sc->ti_rdata->ti_info.ti_tx_considx_ptr) = 1546 TI_CDTXCONSADDR(sc); 1547 1548 /* 1549 * We're done frobbing the General Information Block. Sync 1550 * it. Note we take care of the first stats sync here, as 1551 * well. 1552 */ 1553 TI_CDGIBSYNC(sc, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 1554 1555 /* Set up tuneables */ 1556 if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN) || 1557 (sc->ethercom.ec_capenable & ETHERCAP_VLAN_MTU)) 1558 CSR_WRITE_4(sc, TI_GCR_RX_COAL_TICKS, 1559 (sc->ti_rx_coal_ticks / 10)); 1560 else 1561 CSR_WRITE_4(sc, TI_GCR_RX_COAL_TICKS, sc->ti_rx_coal_ticks); 1562 CSR_WRITE_4(sc, TI_GCR_TX_COAL_TICKS, sc->ti_tx_coal_ticks); 1563 CSR_WRITE_4(sc, TI_GCR_STAT_TICKS, sc->ti_stat_ticks); 1564 CSR_WRITE_4(sc, TI_GCR_RX_MAX_COAL_BD, sc->ti_rx_max_coal_bds); 1565 CSR_WRITE_4(sc, TI_GCR_TX_MAX_COAL_BD, sc->ti_tx_max_coal_bds); 1566 CSR_WRITE_4(sc, TI_GCR_TX_BUFFER_RATIO, sc->ti_tx_buf_ratio); 1567 1568 /* Turn interrupts on. */ 1569 CSR_WRITE_4(sc, TI_GCR_MASK_INTRS, 0); 1570 CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0); 1571 1572 /* Start CPU. */ 1573 TI_CLRBIT(sc, TI_CPU_STATE, (TI_CPUSTATE_HALT | TI_CPUSTATE_STEP)); 1574 1575 return (0); 1576 } 1577 1578 /* 1579 * look for id in the device list, returning the first match 1580 */ 1581 static const struct ti_type * 1582 ti_type_match(struct pci_attach_args *pa) 1583 { 1584 const struct ti_type *t; 1585 1586 t = ti_devs; 1587 while (t->ti_name != NULL) { 1588 if ((PCI_VENDOR(pa->pa_id) == t->ti_vid) && 1589 (PCI_PRODUCT(pa->pa_id) == t->ti_did)) { 1590 return (t); 1591 } 1592 t++; 1593 } 1594 1595 return (NULL); 1596 } 1597 1598 /* 1599 * Probe for a Tigon chip. Check the PCI vendor and device IDs 1600 * against our list and return its name if we find a match. 1601 */ 1602 static int 1603 ti_probe(device_t parent, cfdata_t match, void *aux) 1604 { 1605 struct pci_attach_args *pa = aux; 1606 const struct ti_type *t; 1607 1608 t = ti_type_match(pa); 1609 1610 return ((t == NULL) ? 0 : 1); 1611 } 1612 1613 static void 1614 ti_attach(device_t parent, device_t self, void *aux) 1615 { 1616 uint32_t command; 1617 struct ifnet *ifp; 1618 struct ti_softc *sc; 1619 uint8_t eaddr[ETHER_ADDR_LEN]; 1620 struct pci_attach_args *pa = aux; 1621 pci_chipset_tag_t pc = pa->pa_pc; 1622 pci_intr_handle_t ih; 1623 const char *intrstr = NULL; 1624 bus_dma_segment_t dmaseg; 1625 int error, dmanseg, nolinear; 1626 const struct ti_type *t; 1627 char intrbuf[PCI_INTRSTR_LEN]; 1628 1629 t = ti_type_match(pa); 1630 if (t == NULL) { 1631 aprint_error("ti_attach: were did the card go ?\n"); 1632 return; 1633 } 1634 1635 aprint_normal(": %s (rev. 0x%02x)\n", t->ti_name, 1636 PCI_REVISION(pa->pa_class)); 1637 1638 sc = device_private(self); 1639 sc->sc_dev = self; 1640 1641 /* 1642 * Map control/status registers. 1643 */ 1644 nolinear = 0; 1645 if (pci_mapreg_map(pa, 0x10, 1646 PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT, 1647 BUS_SPACE_MAP_LINEAR , &sc->ti_btag, &sc->ti_bhandle, 1648 NULL, NULL)) { 1649 nolinear = 1; 1650 if (pci_mapreg_map(pa, 0x10, 1651 PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT, 1652 0 , &sc->ti_btag, &sc->ti_bhandle, NULL, NULL)) { 1653 aprint_error_dev(self, "can't map memory space\n"); 1654 return; 1655 } 1656 } 1657 if (nolinear == 0) 1658 sc->ti_vhandle = bus_space_vaddr(sc->ti_btag, sc->ti_bhandle); 1659 else 1660 sc->ti_vhandle = NULL; 1661 1662 command = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); 1663 command |= PCI_COMMAND_MASTER_ENABLE; 1664 pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, command); 1665 1666 /* Allocate interrupt */ 1667 if (pci_intr_map(pa, &ih)) { 1668 aprint_error_dev(sc->sc_dev, "couldn't map interrupt\n"); 1669 return; 1670 } 1671 intrstr = pci_intr_string(pc, ih, intrbuf, sizeof(intrbuf)); 1672 sc->sc_ih = pci_intr_establish_xname(pc, ih, IPL_NET, ti_intr, sc, 1673 device_xname(self)); 1674 if (sc->sc_ih == NULL) { 1675 aprint_error_dev(sc->sc_dev, "couldn't establish interrupt"); 1676 if (intrstr != NULL) 1677 aprint_error(" at %s", intrstr); 1678 aprint_error("\n"); 1679 return; 1680 } 1681 aprint_normal_dev(sc->sc_dev, "interrupting at %s\n", intrstr); 1682 1683 if (ti_chipinit(sc)) { 1684 aprint_error_dev(self, "chip initialization failed\n"); 1685 goto fail2; 1686 } 1687 1688 /* 1689 * Deal with some chip diffrences. 1690 */ 1691 switch (sc->ti_hwrev) { 1692 case TI_HWREV_TIGON: 1693 sc->sc_tx_encap = ti_encap_tigon1; 1694 sc->sc_tx_eof = ti_txeof_tigon1; 1695 if (nolinear == 1) 1696 aprint_error_dev(self, 1697 "memory space not mapped linear\n"); 1698 break; 1699 1700 case TI_HWREV_TIGON_II: 1701 sc->sc_tx_encap = ti_encap_tigon2; 1702 sc->sc_tx_eof = ti_txeof_tigon2; 1703 break; 1704 1705 default: 1706 aprint_error_dev(self, "Unknown chip version: %d\n", 1707 sc->ti_hwrev); 1708 goto fail2; 1709 } 1710 1711 /* Zero out the NIC's on-board SRAM. */ 1712 ti_mem(sc, 0x2000, 0x100000 - 0x2000, NULL); 1713 1714 /* Init again -- zeroing memory may have clobbered some registers. */ 1715 if (ti_chipinit(sc)) { 1716 aprint_error_dev(self, "chip initialization failed\n"); 1717 goto fail2; 1718 } 1719 1720 /* 1721 * Get station address from the EEPROM. Note: the manual states 1722 * that the MAC address is at offset 0x8c, however the data is 1723 * stored as two longwords (since that's how it's loaded into 1724 * the NIC). This means the MAC address is actually preceded 1725 * by two zero bytes. We need to skip over those. 1726 */ 1727 if (ti_read_eeprom(sc, (void *)&eaddr, 1728 TI_EE_MAC_OFFSET + 2, ETHER_ADDR_LEN)) { 1729 aprint_error_dev(self, "failed to read station address\n"); 1730 goto fail2; 1731 } 1732 1733 /* 1734 * A Tigon chip was detected. Inform the world. 1735 */ 1736 aprint_normal_dev(self, "Ethernet address %s\n", ether_sprintf(eaddr)); 1737 1738 sc->sc_dmat = pa->pa_dmat; 1739 1740 /* Allocate the general information block and ring buffers. */ 1741 if ((error = bus_dmamem_alloc(sc->sc_dmat, 1742 sizeof(struct ti_ring_data), PAGE_SIZE, 0, &dmaseg, 1, &dmanseg, 1743 BUS_DMA_NOWAIT)) != 0) { 1744 aprint_error_dev(self, 1745 "can't allocate ring buffer, error = %d\n", error); 1746 goto fail2; 1747 } 1748 1749 if ((error = bus_dmamem_map(sc->sc_dmat, &dmaseg, dmanseg, 1750 sizeof(struct ti_ring_data), (void **)&sc->ti_rdata, 1751 BUS_DMA_NOWAIT | BUS_DMA_COHERENT)) != 0) { 1752 aprint_error_dev(self, 1753 "can't map ring buffer, error = %d\n", error); 1754 goto fail2; 1755 } 1756 1757 if ((error = bus_dmamap_create(sc->sc_dmat, 1758 sizeof(struct ti_ring_data), 1, 1759 sizeof(struct ti_ring_data), 0, BUS_DMA_NOWAIT, 1760 &sc->info_dmamap)) != 0) { 1761 aprint_error_dev(self, 1762 "can't create ring buffer DMA map, error = %d\n", error); 1763 goto fail2; 1764 } 1765 1766 if ((error = bus_dmamap_load(sc->sc_dmat, sc->info_dmamap, 1767 sc->ti_rdata, sizeof(struct ti_ring_data), NULL, 1768 BUS_DMA_NOWAIT)) != 0) { 1769 aprint_error_dev(self, 1770 "can't load ring buffer DMA map, error = %d\n", error); 1771 goto fail2; 1772 } 1773 1774 sc->info_dmaaddr = sc->info_dmamap->dm_segs[0].ds_addr; 1775 1776 memset(sc->ti_rdata, 0, sizeof(struct ti_ring_data)); 1777 1778 /* Try to allocate memory for jumbo buffers. */ 1779 if (ti_alloc_jumbo_mem(sc)) { 1780 aprint_error_dev(self, "jumbo buffer allocation failed\n"); 1781 goto fail2; 1782 } 1783 1784 SIMPLEQ_INIT(&sc->ti_mc_listhead); 1785 1786 /* 1787 * We really need a better way to tell a 1000baseT card 1788 * from a 1000baseSX one, since in theory there could be 1789 * OEMed 1000baseT cards from lame vendors who aren't 1790 * clever enough to change the PCI ID. For the moment 1791 * though, the AceNIC is the only copper card available. 1792 */ 1793 if ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_ALTEON && 1794 PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ALTEON_ACENIC_COPPER) || 1795 (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_NETGEAR && 1796 PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_NETGEAR_GA620T)) 1797 sc->ti_copper = 1; 1798 else 1799 sc->ti_copper = 0; 1800 1801 /* Set default tuneable values. */ 1802 sc->ti_stat_ticks = 2 * TI_TICKS_PER_SEC; 1803 sc->ti_rx_coal_ticks = TI_TICKS_PER_SEC / 5000; 1804 sc->ti_tx_coal_ticks = TI_TICKS_PER_SEC / 500; 1805 sc->ti_rx_max_coal_bds = 64; 1806 sc->ti_tx_max_coal_bds = 128; 1807 sc->ti_tx_buf_ratio = 21; 1808 1809 /* Set up ifnet structure */ 1810 ifp = &sc->ethercom.ec_if; 1811 ifp->if_softc = sc; 1812 strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); 1813 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 1814 ifp->if_ioctl = ti_ioctl; 1815 ifp->if_start = ti_start; 1816 ifp->if_watchdog = ti_watchdog; 1817 IFQ_SET_READY(&ifp->if_snd); 1818 1819 #if 0 1820 /* 1821 * XXX This is not really correct -- we don't necessarily 1822 * XXX want to queue up as many as we can transmit at the 1823 * XXX upper layer like that. Someone with a board should 1824 * XXX check to see how this affects performance. 1825 */ 1826 ifp->if_snd.ifq_maxlen = TI_TX_RING_CNT - 1; 1827 #endif 1828 1829 /* 1830 * We can support 802.1Q VLAN-sized frames. 1831 */ 1832 sc->ethercom.ec_capabilities |= 1833 ETHERCAP_VLAN_MTU | ETHERCAP_VLAN_HWTAGGING; 1834 sc->ethercom.ec_capenable |= ETHERCAP_VLAN_HWTAGGING; 1835 1836 /* 1837 * We can do IPv4, TCPv4, and UDPv4 checksums in hardware. 1838 */ 1839 ifp->if_capabilities |= 1840 IFCAP_CSUM_IPv4_Tx | IFCAP_CSUM_IPv4_Rx | 1841 IFCAP_CSUM_TCPv4_Tx | IFCAP_CSUM_TCPv4_Rx | 1842 IFCAP_CSUM_UDPv4_Tx | IFCAP_CSUM_UDPv4_Rx; 1843 1844 /* Set up ifmedia support. */ 1845 sc->ethercom.ec_ifmedia = &sc->ifmedia; 1846 ifmedia_init(&sc->ifmedia, IFM_IMASK, ti_ifmedia_upd, ti_ifmedia_sts); 1847 if (sc->ti_copper) { 1848 /* 1849 * Copper cards allow manual 10/100 mode selection, 1850 * but not manual 1000baseT mode selection. Why? 1851 * Because currently there's no way to specify the 1852 * master/slave setting through the firmware interface, 1853 * so Alteon decided to just bag it and handle it 1854 * via autonegotiation. 1855 */ 1856 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_10_T, 0, NULL); 1857 ifmedia_add(&sc->ifmedia, 1858 IFM_ETHER | IFM_10_T | IFM_FDX, 0, NULL); 1859 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_100_TX, 0, NULL); 1860 ifmedia_add(&sc->ifmedia, 1861 IFM_ETHER | IFM_100_TX | IFM_FDX, 0, NULL); 1862 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_1000_T, 0, NULL); 1863 ifmedia_add(&sc->ifmedia, 1864 IFM_ETHER | IFM_1000_T | IFM_FDX, 0, NULL); 1865 } else { 1866 /* Fiber cards don't support 10/100 modes. */ 1867 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_1000_SX, 0, NULL); 1868 ifmedia_add(&sc->ifmedia, 1869 IFM_ETHER | IFM_1000_SX | IFM_FDX, 0, NULL); 1870 } 1871 ifmedia_add(&sc->ifmedia, IFM_ETHER | IFM_AUTO, 0, NULL); 1872 ifmedia_set(&sc->ifmedia, IFM_ETHER | IFM_AUTO); 1873 1874 /* 1875 * Call MI attach routines. 1876 */ 1877 if_attach(ifp); 1878 if_deferred_start_init(ifp, NULL); 1879 ether_ifattach(ifp, eaddr); 1880 1881 /* 1882 * Add shutdown hook so that DMA is disabled prior to reboot. Not 1883 * doing do could allow DMA to corrupt kernel memory during the 1884 * reboot before the driver initializes. 1885 */ 1886 if (pmf_device_register1(self, NULL, NULL, ti_shutdown)) 1887 pmf_class_network_register(self, ifp); 1888 else 1889 aprint_error_dev(self, "couldn't establish power handler\n"); 1890 1891 return; 1892 fail2: 1893 pci_intr_disestablish(pc, sc->sc_ih); 1894 return; 1895 } 1896 1897 /* 1898 * Frame reception handling. This is called if there's a frame 1899 * on the receive return list. 1900 * 1901 * Note: we have to be able to handle three possibilities here: 1902 * 1) the frame is from the mini receive ring (can only happen) 1903 * on Tigon 2 boards) 1904 * 2) the frame is from the jumbo receive ring 1905 * 3) the frame is from the standard receive ring 1906 */ 1907 1908 static void 1909 ti_rxeof(struct ti_softc *sc) 1910 { 1911 struct ifnet *ifp; 1912 struct ti_cmd_desc cmd; 1913 1914 ifp = &sc->ethercom.ec_if; 1915 1916 while (sc->ti_rx_saved_considx != sc->ti_return_prodidx.ti_idx) { 1917 struct ti_rx_desc *cur_rx; 1918 uint32_t rxidx; 1919 struct mbuf *m = NULL; 1920 struct ether_header *eh; 1921 bus_dmamap_t dmamap; 1922 1923 cur_rx = 1924 &sc->ti_rdata->ti_rx_return_ring[sc->ti_rx_saved_considx]; 1925 rxidx = cur_rx->ti_idx; 1926 TI_INC(sc->ti_rx_saved_considx, TI_RETURN_RING_CNT); 1927 1928 if (cur_rx->ti_flags & TI_BDFLAG_JUMBO_RING) { 1929 TI_INC(sc->ti_jumbo, TI_JUMBO_RX_RING_CNT); 1930 m = sc->ti_cdata.ti_rx_jumbo_chain[rxidx]; 1931 sc->ti_cdata.ti_rx_jumbo_chain[rxidx] = NULL; 1932 if (cur_rx->ti_flags & TI_BDFLAG_ERROR) { 1933 if_statinc(ifp, if_ierrors); 1934 ti_newbuf_jumbo(sc, sc->ti_jumbo, m); 1935 continue; 1936 } 1937 if (ti_newbuf_jumbo(sc, sc->ti_jumbo, NULL) 1938 == ENOBUFS) { 1939 if_statinc(ifp, if_ierrors); 1940 ti_newbuf_jumbo(sc, sc->ti_jumbo, m); 1941 continue; 1942 } 1943 } else if (cur_rx->ti_flags & TI_BDFLAG_MINI_RING) { 1944 TI_INC(sc->ti_mini, TI_MINI_RX_RING_CNT); 1945 m = sc->ti_cdata.ti_rx_mini_chain[rxidx]; 1946 sc->ti_cdata.ti_rx_mini_chain[rxidx] = NULL; 1947 dmamap = sc->mini_dmamap[rxidx]; 1948 sc->mini_dmamap[rxidx] = 0; 1949 if (cur_rx->ti_flags & TI_BDFLAG_ERROR) { 1950 if_statinc(ifp, if_ierrors); 1951 ti_newbuf_mini(sc, sc->ti_mini, m, dmamap); 1952 continue; 1953 } 1954 if (ti_newbuf_mini(sc, sc->ti_mini, NULL, dmamap) 1955 == ENOBUFS) { 1956 if_statinc(ifp, if_ierrors); 1957 ti_newbuf_mini(sc, sc->ti_mini, m, dmamap); 1958 continue; 1959 } 1960 } else { 1961 TI_INC(sc->ti_std, TI_STD_RX_RING_CNT); 1962 m = sc->ti_cdata.ti_rx_std_chain[rxidx]; 1963 sc->ti_cdata.ti_rx_std_chain[rxidx] = NULL; 1964 dmamap = sc->std_dmamap[rxidx]; 1965 sc->std_dmamap[rxidx] = 0; 1966 if (cur_rx->ti_flags & TI_BDFLAG_ERROR) { 1967 if_statinc(ifp, if_ierrors); 1968 ti_newbuf_std(sc, sc->ti_std, m, dmamap); 1969 continue; 1970 } 1971 if (ti_newbuf_std(sc, sc->ti_std, NULL, dmamap) 1972 == ENOBUFS) { 1973 if_statinc(ifp, if_ierrors); 1974 ti_newbuf_std(sc, sc->ti_std, m, dmamap); 1975 continue; 1976 } 1977 } 1978 1979 m->m_pkthdr.len = m->m_len = cur_rx->ti_len; 1980 m_set_rcvif(m, ifp); 1981 1982 eh = mtod(m, struct ether_header *); 1983 switch (ntohs(eh->ether_type)) { 1984 #ifdef INET 1985 case ETHERTYPE_IP: 1986 { 1987 struct ip *ip = (struct ip *) (eh + 1); 1988 1989 /* 1990 * Note the Tigon firmware does not invert 1991 * the checksum for us, hence the XOR. 1992 */ 1993 m->m_pkthdr.csum_flags |= M_CSUM_IPv4; 1994 if ((cur_rx->ti_ip_cksum ^ 0xffff) != 0) 1995 m->m_pkthdr.csum_flags |= M_CSUM_IPv4_BAD; 1996 /* 1997 * ntohs() the constant so the compiler can 1998 * optimize... 1999 * 2000 * XXX Figure out a sane way to deal with 2001 * fragmented packets. 2002 */ 2003 if ((ip->ip_off & htons(IP_MF | IP_OFFMASK)) == 0) { 2004 switch (ip->ip_p) { 2005 case IPPROTO_TCP: 2006 m->m_pkthdr.csum_data = 2007 cur_rx->ti_tcp_udp_cksum; 2008 m->m_pkthdr.csum_flags |= 2009 M_CSUM_TCPv4 | M_CSUM_DATA; 2010 break; 2011 case IPPROTO_UDP: 2012 m->m_pkthdr.csum_data = 2013 cur_rx->ti_tcp_udp_cksum; 2014 m->m_pkthdr.csum_flags |= 2015 M_CSUM_UDPv4 | M_CSUM_DATA; 2016 break; 2017 default: 2018 /* Nothing */; 2019 } 2020 } 2021 break; 2022 } 2023 #endif 2024 default: 2025 /* Nothing. */ 2026 break; 2027 } 2028 2029 if (cur_rx->ti_flags & TI_BDFLAG_VLAN_TAG) 2030 vlan_set_tag(m, cur_rx->ti_vlan_tag); 2031 2032 if_percpuq_enqueue(ifp->if_percpuq, m); 2033 } 2034 2035 /* Only necessary on the Tigon 1. */ 2036 if (sc->ti_hwrev == TI_HWREV_TIGON) 2037 CSR_WRITE_4(sc, TI_GCR_RXRETURNCONS_IDX, 2038 sc->ti_rx_saved_considx); 2039 2040 TI_UPDATE_STDPROD(sc, sc->ti_std); 2041 TI_UPDATE_MINIPROD(sc, sc->ti_mini); 2042 TI_UPDATE_JUMBOPROD(sc, sc->ti_jumbo); 2043 } 2044 2045 static void 2046 ti_txeof_tigon1(struct ti_softc *sc) 2047 { 2048 struct ti_tx_desc *cur_tx = NULL; 2049 struct ifnet *ifp; 2050 struct txdmamap_pool_entry *dma; 2051 2052 ifp = &sc->ethercom.ec_if; 2053 2054 /* 2055 * Go through our tx ring and free mbufs for those 2056 * frames that have been sent. 2057 */ 2058 while (sc->ti_tx_saved_considx != sc->ti_tx_considx.ti_idx) { 2059 uint32_t idx = 0; 2060 2061 idx = sc->ti_tx_saved_considx; 2062 if (idx > 383) 2063 CSR_WRITE_4(sc, TI_WINBASE, 2064 TI_TX_RING_BASE + 6144); 2065 else if (idx > 255) 2066 CSR_WRITE_4(sc, TI_WINBASE, 2067 TI_TX_RING_BASE + 4096); 2068 else if (idx > 127) 2069 CSR_WRITE_4(sc, TI_WINBASE, 2070 TI_TX_RING_BASE + 2048); 2071 else 2072 CSR_WRITE_4(sc, TI_WINBASE, 2073 TI_TX_RING_BASE); 2074 cur_tx = &sc->ti_tx_ring_nic[idx % 128]; 2075 if (cur_tx->ti_flags & TI_BDFLAG_END) 2076 if_statinc(ifp, if_opackets); 2077 if (sc->ti_cdata.ti_tx_chain[idx] != NULL) { 2078 dma = sc->txdma[idx]; 2079 KDASSERT(dma != NULL); 2080 bus_dmamap_sync(sc->sc_dmat, dma->dmamap, 0, 2081 dma->dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE); 2082 bus_dmamap_unload(sc->sc_dmat, dma->dmamap); 2083 2084 SIMPLEQ_INSERT_HEAD(&sc->txdma_list, dma, link); 2085 sc->txdma[idx] = NULL; 2086 2087 m_freem(sc->ti_cdata.ti_tx_chain[idx]); 2088 sc->ti_cdata.ti_tx_chain[idx] = NULL; 2089 } 2090 sc->ti_txcnt--; 2091 TI_INC(sc->ti_tx_saved_considx, TI_TX_RING_CNT); 2092 ifp->if_timer = 0; 2093 } 2094 2095 if (cur_tx != NULL) 2096 ifp->if_flags &= ~IFF_OACTIVE; 2097 } 2098 2099 static void 2100 ti_txeof_tigon2(struct ti_softc *sc) 2101 { 2102 struct ti_tx_desc *cur_tx = NULL; 2103 struct ifnet *ifp; 2104 struct txdmamap_pool_entry *dma; 2105 int firstidx, cnt; 2106 2107 ifp = &sc->ethercom.ec_if; 2108 2109 /* 2110 * Go through our tx ring and free mbufs for those 2111 * frames that have been sent. 2112 */ 2113 firstidx = sc->ti_tx_saved_considx; 2114 cnt = 0; 2115 while (sc->ti_tx_saved_considx != sc->ti_tx_considx.ti_idx) { 2116 uint32_t idx = 0; 2117 2118 idx = sc->ti_tx_saved_considx; 2119 cur_tx = &sc->ti_rdata->ti_tx_ring[idx]; 2120 if (cur_tx->ti_flags & TI_BDFLAG_END) 2121 if_statinc(ifp, if_opackets); 2122 if (sc->ti_cdata.ti_tx_chain[idx] != NULL) { 2123 dma = sc->txdma[idx]; 2124 KDASSERT(dma != NULL); 2125 bus_dmamap_sync(sc->sc_dmat, dma->dmamap, 0, 2126 dma->dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE); 2127 bus_dmamap_unload(sc->sc_dmat, dma->dmamap); 2128 2129 SIMPLEQ_INSERT_HEAD(&sc->txdma_list, dma, link); 2130 sc->txdma[idx] = NULL; 2131 2132 m_freem(sc->ti_cdata.ti_tx_chain[idx]); 2133 sc->ti_cdata.ti_tx_chain[idx] = NULL; 2134 } 2135 cnt++; 2136 sc->ti_txcnt--; 2137 TI_INC(sc->ti_tx_saved_considx, TI_TX_RING_CNT); 2138 ifp->if_timer = 0; 2139 } 2140 2141 if (cnt != 0) 2142 TI_CDTXSYNC(sc, firstidx, cnt, BUS_DMASYNC_POSTWRITE); 2143 2144 if (cur_tx != NULL) 2145 ifp->if_flags &= ~IFF_OACTIVE; 2146 } 2147 2148 static int 2149 ti_intr(void *xsc) 2150 { 2151 struct ti_softc *sc; 2152 struct ifnet *ifp; 2153 2154 sc = xsc; 2155 ifp = &sc->ethercom.ec_if; 2156 2157 #ifdef notdef 2158 /* Avoid this for now -- checking this register is expensive. */ 2159 /* Make sure this is really our interrupt. */ 2160 if (!(CSR_READ_4(sc, TI_MISC_HOST_CTL) & TI_MHC_INTSTATE)) 2161 return (0); 2162 #endif 2163 2164 /* Ack interrupt and stop others from occurring. */ 2165 CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1); 2166 2167 if (ifp->if_flags & IFF_RUNNING) { 2168 /* Check RX return ring producer/consumer */ 2169 ti_rxeof(sc); 2170 2171 /* Check TX ring producer/consumer */ 2172 (*sc->sc_tx_eof)(sc); 2173 } 2174 2175 ti_handle_events(sc); 2176 2177 /* Re-enable interrupts. */ 2178 CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0); 2179 2180 if ((ifp->if_flags & IFF_RUNNING) != 0) 2181 if_schedule_deferred_start(ifp); 2182 2183 return (1); 2184 } 2185 2186 static void 2187 ti_stats_update(struct ti_softc *sc) 2188 { 2189 struct ifnet *ifp = &sc->ethercom.ec_if; 2190 2191 TI_CDSTATSSYNC(sc, BUS_DMASYNC_POSTREAD); 2192 2193 uint64_t collisions = 2194 (sc->ti_rdata->ti_info.ti_stats.dot3StatsSingleCollisionFrames + 2195 sc->ti_rdata->ti_info.ti_stats.dot3StatsMultipleCollisionFrames + 2196 sc->ti_rdata->ti_info.ti_stats.dot3StatsExcessiveCollisions + 2197 sc->ti_rdata->ti_info.ti_stats.dot3StatsLateCollisions); 2198 if_statadd(ifp, if_collisions, collisions - sc->ti_if_collisions); 2199 sc->ti_if_collisions = collisions; 2200 2201 TI_CDSTATSSYNC(sc, BUS_DMASYNC_PREREAD); 2202 } 2203 2204 /* 2205 * Encapsulate an mbuf chain in the tx ring by coupling the mbuf data 2206 * pointers to descriptors. 2207 */ 2208 static int 2209 ti_encap_tigon1(struct ti_softc *sc, struct mbuf *m_head, uint32_t *txidx) 2210 { 2211 struct ti_tx_desc *f = NULL; 2212 uint32_t frag, cur, cnt = 0; 2213 struct txdmamap_pool_entry *dma; 2214 bus_dmamap_t dmamap; 2215 int error, i; 2216 uint16_t csum_flags = 0; 2217 2218 dma = SIMPLEQ_FIRST(&sc->txdma_list); 2219 if (dma == NULL) { 2220 return ENOMEM; 2221 } 2222 dmamap = dma->dmamap; 2223 2224 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m_head, 2225 BUS_DMA_WRITE | BUS_DMA_NOWAIT); 2226 if (error) { 2227 struct mbuf *m; 2228 int j = 0; 2229 for (m = m_head; m; m = m->m_next) 2230 j++; 2231 printf("ti_encap: bus_dmamap_load_mbuf (len %d, %d frags) " 2232 "error %d\n", m_head->m_pkthdr.len, j, error); 2233 return (ENOMEM); 2234 } 2235 2236 cur = frag = *txidx; 2237 2238 if (m_head->m_pkthdr.csum_flags & M_CSUM_IPv4) { 2239 /* IP header checksum field must be 0! */ 2240 csum_flags |= TI_BDFLAG_IP_CKSUM; 2241 } 2242 if (m_head->m_pkthdr.csum_flags & (M_CSUM_TCPv4 | M_CSUM_UDPv4)) 2243 csum_flags |= TI_BDFLAG_TCP_UDP_CKSUM; 2244 2245 /* XXX fragmented packet checksum capability? */ 2246 2247 /* 2248 * Start packing the mbufs in this chain into 2249 * the fragment pointers. Stop when we run out 2250 * of fragments or hit the end of the mbuf chain. 2251 */ 2252 for (i = 0; i < dmamap->dm_nsegs; i++) { 2253 if (frag > 383) 2254 CSR_WRITE_4(sc, TI_WINBASE, 2255 TI_TX_RING_BASE + 6144); 2256 else if (frag > 255) 2257 CSR_WRITE_4(sc, TI_WINBASE, 2258 TI_TX_RING_BASE + 4096); 2259 else if (frag > 127) 2260 CSR_WRITE_4(sc, TI_WINBASE, 2261 TI_TX_RING_BASE + 2048); 2262 else 2263 CSR_WRITE_4(sc, TI_WINBASE, 2264 TI_TX_RING_BASE); 2265 f = &sc->ti_tx_ring_nic[frag % 128]; 2266 if (sc->ti_cdata.ti_tx_chain[frag] != NULL) 2267 break; 2268 TI_HOSTADDR(f->ti_addr) = dmamap->dm_segs[i].ds_addr; 2269 f->ti_len = dmamap->dm_segs[i].ds_len; 2270 f->ti_flags = csum_flags; 2271 if (vlan_has_tag(m_head)) { 2272 f->ti_flags |= TI_BDFLAG_VLAN_TAG; 2273 f->ti_vlan_tag = vlan_get_tag(m_head); 2274 } else { 2275 f->ti_vlan_tag = 0; 2276 } 2277 /* 2278 * Sanity check: avoid coming within 16 descriptors 2279 * of the end of the ring. 2280 */ 2281 if ((TI_TX_RING_CNT - (sc->ti_txcnt + cnt)) < 16) 2282 return (ENOBUFS); 2283 cur = frag; 2284 TI_INC(frag, TI_TX_RING_CNT); 2285 cnt++; 2286 } 2287 2288 if (i < dmamap->dm_nsegs) 2289 return (ENOBUFS); 2290 2291 if (frag == sc->ti_tx_saved_considx) 2292 return (ENOBUFS); 2293 2294 sc->ti_tx_ring_nic[cur % 128].ti_flags |= 2295 TI_BDFLAG_END; 2296 2297 /* Sync the packet's DMA map. */ 2298 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, 2299 BUS_DMASYNC_PREWRITE); 2300 2301 sc->ti_cdata.ti_tx_chain[cur] = m_head; 2302 SIMPLEQ_REMOVE_HEAD(&sc->txdma_list, link); 2303 sc->txdma[cur] = dma; 2304 sc->ti_txcnt += cnt; 2305 2306 *txidx = frag; 2307 2308 return (0); 2309 } 2310 2311 static int 2312 ti_encap_tigon2(struct ti_softc *sc, struct mbuf *m_head, uint32_t *txidx) 2313 { 2314 struct ti_tx_desc *f = NULL; 2315 uint32_t frag, firstfrag, cur, cnt = 0; 2316 struct txdmamap_pool_entry *dma; 2317 bus_dmamap_t dmamap; 2318 int error, i; 2319 uint16_t csum_flags = 0; 2320 2321 dma = SIMPLEQ_FIRST(&sc->txdma_list); 2322 if (dma == NULL) { 2323 return ENOMEM; 2324 } 2325 dmamap = dma->dmamap; 2326 2327 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m_head, 2328 BUS_DMA_WRITE | BUS_DMA_NOWAIT); 2329 if (error) { 2330 struct mbuf *m; 2331 int j = 0; 2332 for (m = m_head; m; m = m->m_next) 2333 j++; 2334 printf("ti_encap: bus_dmamap_load_mbuf (len %d, %d frags) " 2335 "error %d\n", m_head->m_pkthdr.len, j, error); 2336 return (ENOMEM); 2337 } 2338 2339 cur = firstfrag = frag = *txidx; 2340 2341 if (m_head->m_pkthdr.csum_flags & M_CSUM_IPv4) { 2342 /* IP header checksum field must be 0! */ 2343 csum_flags |= TI_BDFLAG_IP_CKSUM; 2344 } 2345 if (m_head->m_pkthdr.csum_flags & (M_CSUM_TCPv4 | M_CSUM_UDPv4)) 2346 csum_flags |= TI_BDFLAG_TCP_UDP_CKSUM; 2347 2348 /* XXX fragmented packet checksum capability? */ 2349 2350 /* 2351 * Start packing the mbufs in this chain into 2352 * the fragment pointers. Stop when we run out 2353 * of fragments or hit the end of the mbuf chain. 2354 */ 2355 for (i = 0; i < dmamap->dm_nsegs; i++) { 2356 f = &sc->ti_rdata->ti_tx_ring[frag]; 2357 if (sc->ti_cdata.ti_tx_chain[frag] != NULL) 2358 break; 2359 TI_HOSTADDR(f->ti_addr) = dmamap->dm_segs[i].ds_addr; 2360 f->ti_len = dmamap->dm_segs[i].ds_len; 2361 f->ti_flags = csum_flags; 2362 if (vlan_has_tag(m_head)) { 2363 f->ti_flags |= TI_BDFLAG_VLAN_TAG; 2364 f->ti_vlan_tag = vlan_get_tag(m_head); 2365 } else { 2366 f->ti_vlan_tag = 0; 2367 } 2368 /* 2369 * Sanity check: avoid coming within 16 descriptors 2370 * of the end of the ring. 2371 */ 2372 if ((TI_TX_RING_CNT - (sc->ti_txcnt + cnt)) < 16) 2373 return (ENOBUFS); 2374 cur = frag; 2375 TI_INC(frag, TI_TX_RING_CNT); 2376 cnt++; 2377 } 2378 2379 if (i < dmamap->dm_nsegs) 2380 return (ENOBUFS); 2381 2382 if (frag == sc->ti_tx_saved_considx) 2383 return (ENOBUFS); 2384 2385 sc->ti_rdata->ti_tx_ring[cur].ti_flags |= TI_BDFLAG_END; 2386 2387 /* Sync the packet's DMA map. */ 2388 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, 2389 BUS_DMASYNC_PREWRITE); 2390 2391 /* Sync the descriptors we are using. */ 2392 TI_CDTXSYNC(sc, firstfrag, cnt, BUS_DMASYNC_PREWRITE); 2393 2394 sc->ti_cdata.ti_tx_chain[cur] = m_head; 2395 SIMPLEQ_REMOVE_HEAD(&sc->txdma_list, link); 2396 sc->txdma[cur] = dma; 2397 sc->ti_txcnt += cnt; 2398 2399 *txidx = frag; 2400 2401 return (0); 2402 } 2403 2404 /* 2405 * Main transmit routine. To avoid having to do mbuf copies, we put pointers 2406 * to the mbuf data regions directly in the transmit descriptors. 2407 */ 2408 static void 2409 ti_start(struct ifnet *ifp) 2410 { 2411 struct ti_softc *sc; 2412 struct mbuf *m_head = NULL; 2413 uint32_t prodidx = 0; 2414 2415 sc = ifp->if_softc; 2416 2417 prodidx = CSR_READ_4(sc, TI_MB_SENDPROD_IDX); 2418 2419 while (sc->ti_cdata.ti_tx_chain[prodidx] == NULL) { 2420 IFQ_POLL(&ifp->if_snd, m_head); 2421 if (m_head == NULL) 2422 break; 2423 2424 /* 2425 * Pack the data into the transmit ring. If we 2426 * don't have room, set the OACTIVE flag and wait 2427 * for the NIC to drain the ring. 2428 */ 2429 if ((*sc->sc_tx_encap)(sc, m_head, &prodidx)) { 2430 ifp->if_flags |= IFF_OACTIVE; 2431 break; 2432 } 2433 2434 IFQ_DEQUEUE(&ifp->if_snd, m_head); 2435 2436 /* 2437 * If there's a BPF listener, bounce a copy of this frame 2438 * to him. 2439 */ 2440 bpf_mtap(ifp, m_head, BPF_D_OUT); 2441 } 2442 2443 /* Transmit */ 2444 CSR_WRITE_4(sc, TI_MB_SENDPROD_IDX, prodidx); 2445 2446 /* Set a timeout in case the chip goes out to lunch. */ 2447 ifp->if_timer = 5; 2448 } 2449 2450 static void 2451 ti_init(void *xsc) 2452 { 2453 struct ti_softc *sc = xsc; 2454 int s; 2455 2456 s = splnet(); 2457 2458 /* Cancel pending I/O and flush buffers. */ 2459 ti_stop(sc); 2460 2461 /* Init the gen info block, ring control blocks and firmware. */ 2462 if (ti_gibinit(sc)) { 2463 aprint_error_dev(sc->sc_dev, "initialization failure\n"); 2464 splx(s); 2465 return; 2466 } 2467 2468 splx(s); 2469 } 2470 2471 static void 2472 ti_init2(struct ti_softc *sc) 2473 { 2474 struct ti_cmd_desc cmd; 2475 struct ifnet *ifp; 2476 const uint8_t *m; 2477 struct ifmedia *ifm; 2478 int tmp; 2479 2480 ifp = &sc->ethercom.ec_if; 2481 2482 /* Specify MTU and interface index. */ 2483 CSR_WRITE_4(sc, TI_GCR_IFINDEX, device_unit(sc->sc_dev)); /* ??? */ 2484 2485 tmp = ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN; 2486 if (sc->ethercom.ec_capenable & ETHERCAP_VLAN_MTU) 2487 tmp += ETHER_VLAN_ENCAP_LEN; 2488 CSR_WRITE_4(sc, TI_GCR_IFMTU, tmp); 2489 2490 TI_DO_CMD(TI_CMD_UPDATE_GENCOM, 0, 0); 2491 2492 /* Load our MAC address. */ 2493 m = (const uint8_t *)CLLADDR(ifp->if_sadl); 2494 CSR_WRITE_4(sc, TI_GCR_PAR0, (m[0] << 8) | m[1]); 2495 CSR_WRITE_4(sc, TI_GCR_PAR1, (m[2] << 24) | (m[3] << 16) 2496 | (m[4] << 8) | m[5]); 2497 TI_DO_CMD(TI_CMD_SET_MAC_ADDR, 0, 0); 2498 2499 /* Enable or disable promiscuous mode as needed. */ 2500 if (ifp->if_flags & IFF_PROMISC) { 2501 TI_DO_CMD(TI_CMD_SET_PROMISC_MODE, TI_CMD_CODE_PROMISC_ENB, 0); 2502 } else { 2503 TI_DO_CMD(TI_CMD_SET_PROMISC_MODE, TI_CMD_CODE_PROMISC_DIS, 0); 2504 } 2505 2506 /* Program multicast filter. */ 2507 ti_setmulti(sc); 2508 2509 /* 2510 * If this is a Tigon 1, we should tell the 2511 * firmware to use software packet filtering. 2512 */ 2513 if (sc->ti_hwrev == TI_HWREV_TIGON) { 2514 TI_DO_CMD(TI_CMD_FDR_FILTERING, TI_CMD_CODE_FILT_ENB, 0); 2515 } 2516 2517 /* Init RX ring. */ 2518 ti_init_rx_ring_std(sc); 2519 2520 /* Init jumbo RX ring. */ 2521 if (ifp->if_mtu > (MCLBYTES - ETHER_HDR_LEN - ETHER_CRC_LEN)) 2522 ti_init_rx_ring_jumbo(sc); 2523 2524 /* 2525 * If this is a Tigon 2, we can also configure the 2526 * mini ring. 2527 */ 2528 if (sc->ti_hwrev == TI_HWREV_TIGON_II) 2529 ti_init_rx_ring_mini(sc); 2530 2531 CSR_WRITE_4(sc, TI_GCR_RXRETURNCONS_IDX, 0); 2532 sc->ti_rx_saved_considx = 0; 2533 2534 /* Init TX ring. */ 2535 ti_init_tx_ring(sc); 2536 2537 /* Tell firmware we're alive. */ 2538 TI_DO_CMD(TI_CMD_HOST_STATE, TI_CMD_CODE_STACK_UP, 0); 2539 2540 /* Enable host interrupts. */ 2541 CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0); 2542 2543 ifp->if_flags |= IFF_RUNNING; 2544 ifp->if_flags &= ~IFF_OACTIVE; 2545 2546 /* 2547 * Make sure to set media properly. We have to do this 2548 * here since we have to issue commands in order to set 2549 * the link negotiation and we can't issue commands until 2550 * the firmware is running. 2551 */ 2552 ifm = &sc->ifmedia; 2553 tmp = ifm->ifm_media; 2554 ifm->ifm_media = ifm->ifm_cur->ifm_media; 2555 ti_ifmedia_upd(ifp); 2556 ifm->ifm_media = tmp; 2557 } 2558 2559 /* 2560 * Set media options. 2561 */ 2562 static int 2563 ti_ifmedia_upd(struct ifnet *ifp) 2564 { 2565 struct ti_softc *sc; 2566 struct ifmedia *ifm; 2567 struct ti_cmd_desc cmd; 2568 2569 sc = ifp->if_softc; 2570 ifm = &sc->ifmedia; 2571 2572 if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) 2573 return (EINVAL); 2574 2575 switch (IFM_SUBTYPE(ifm->ifm_media)) { 2576 case IFM_AUTO: 2577 CSR_WRITE_4(sc, TI_GCR_GLINK, TI_GLNK_PREF | TI_GLNK_1000MB | 2578 TI_GLNK_FULL_DUPLEX | TI_GLNK_RX_FLOWCTL_Y | 2579 TI_GLNK_AUTONEGENB | TI_GLNK_ENB); 2580 CSR_WRITE_4(sc, TI_GCR_LINK, TI_LNK_100MB | TI_LNK_10MB | 2581 TI_LNK_FULL_DUPLEX | TI_LNK_HALF_DUPLEX | 2582 TI_LNK_AUTONEGENB | TI_LNK_ENB); 2583 TI_DO_CMD(TI_CMD_LINK_NEGOTIATION, 2584 TI_CMD_CODE_NEGOTIATE_BOTH, 0); 2585 break; 2586 case IFM_1000_SX: 2587 case IFM_1000_T: 2588 if ((ifm->ifm_media & IFM_FDX) != 0) { 2589 CSR_WRITE_4(sc, TI_GCR_GLINK, 2590 TI_GLNK_PREF | TI_GLNK_1000MB | TI_GLNK_FULL_DUPLEX 2591 | TI_GLNK_RX_FLOWCTL_Y | TI_GLNK_ENB); 2592 } else { 2593 CSR_WRITE_4(sc, TI_GCR_GLINK, 2594 TI_GLNK_PREF | TI_GLNK_1000MB | 2595 TI_GLNK_RX_FLOWCTL_Y | TI_GLNK_ENB); 2596 } 2597 CSR_WRITE_4(sc, TI_GCR_LINK, 0); 2598 TI_DO_CMD(TI_CMD_LINK_NEGOTIATION, 2599 TI_CMD_CODE_NEGOTIATE_GIGABIT, 0); 2600 break; 2601 case IFM_100_FX: 2602 case IFM_10_FL: 2603 case IFM_100_TX: 2604 case IFM_10_T: 2605 CSR_WRITE_4(sc, TI_GCR_GLINK, 0); 2606 CSR_WRITE_4(sc, TI_GCR_LINK, TI_LNK_ENB | TI_LNK_PREF); 2607 if (IFM_SUBTYPE(ifm->ifm_media) == IFM_100_FX || 2608 IFM_SUBTYPE(ifm->ifm_media) == IFM_100_TX) { 2609 TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_100MB); 2610 } else { 2611 TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_10MB); 2612 } 2613 if ((ifm->ifm_media & IFM_FDX) != 0) { 2614 TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_FULL_DUPLEX); 2615 } else { 2616 TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_HALF_DUPLEX); 2617 } 2618 TI_DO_CMD(TI_CMD_LINK_NEGOTIATION, 2619 TI_CMD_CODE_NEGOTIATE_10_100, 0); 2620 break; 2621 } 2622 2623 sc->ethercom.ec_if.if_baudrate = 2624 ifmedia_baudrate(ifm->ifm_media); 2625 2626 return (0); 2627 } 2628 2629 /* 2630 * Report current media status. 2631 */ 2632 static void 2633 ti_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) 2634 { 2635 struct ti_softc *sc; 2636 uint32_t media = 0; 2637 2638 sc = ifp->if_softc; 2639 2640 ifmr->ifm_status = IFM_AVALID; 2641 ifmr->ifm_active = IFM_ETHER; 2642 2643 if (sc->ti_linkstat == TI_EV_CODE_LINK_DOWN) 2644 return; 2645 2646 ifmr->ifm_status |= IFM_ACTIVE; 2647 2648 if (sc->ti_linkstat == TI_EV_CODE_GIG_LINK_UP) { 2649 media = CSR_READ_4(sc, TI_GCR_GLINK_STAT); 2650 if (sc->ti_copper) 2651 ifmr->ifm_active |= IFM_1000_T; 2652 else 2653 ifmr->ifm_active |= IFM_1000_SX; 2654 if (media & TI_GLNK_FULL_DUPLEX) 2655 ifmr->ifm_active |= IFM_FDX; 2656 else 2657 ifmr->ifm_active |= IFM_HDX; 2658 } else if (sc->ti_linkstat == TI_EV_CODE_LINK_UP) { 2659 media = CSR_READ_4(sc, TI_GCR_LINK_STAT); 2660 if (sc->ti_copper) { 2661 if (media & TI_LNK_100MB) 2662 ifmr->ifm_active |= IFM_100_TX; 2663 if (media & TI_LNK_10MB) 2664 ifmr->ifm_active |= IFM_10_T; 2665 } else { 2666 if (media & TI_LNK_100MB) 2667 ifmr->ifm_active |= IFM_100_FX; 2668 if (media & TI_LNK_10MB) 2669 ifmr->ifm_active |= IFM_10_FL; 2670 } 2671 if (media & TI_LNK_FULL_DUPLEX) 2672 ifmr->ifm_active |= IFM_FDX; 2673 if (media & TI_LNK_HALF_DUPLEX) 2674 ifmr->ifm_active |= IFM_HDX; 2675 } 2676 2677 sc->ethercom.ec_if.if_baudrate = 2678 ifmedia_baudrate(sc->ifmedia.ifm_media); 2679 } 2680 2681 static int 2682 ti_ether_ioctl(struct ifnet *ifp, u_long cmd, void *data) 2683 { 2684 struct ifaddr *ifa = (struct ifaddr *)data; 2685 struct ti_softc *sc = ifp->if_softc; 2686 2687 if ((ifp->if_flags & IFF_UP) == 0) { 2688 ifp->if_flags |= IFF_UP; 2689 ti_init(sc); 2690 } 2691 2692 switch (cmd) { 2693 case SIOCINITIFADDR: 2694 2695 switch (ifa->ifa_addr->sa_family) { 2696 #ifdef INET 2697 case AF_INET: 2698 arp_ifinit(ifp, ifa); 2699 break; 2700 #endif 2701 default: 2702 break; 2703 } 2704 break; 2705 2706 default: 2707 return (EINVAL); 2708 } 2709 2710 return (0); 2711 } 2712 2713 static int 2714 ti_ioctl(struct ifnet *ifp, u_long command, void *data) 2715 { 2716 struct ti_softc *sc = ifp->if_softc; 2717 struct ifreq *ifr = (struct ifreq *)data; 2718 int s, error = 0; 2719 struct ti_cmd_desc cmd; 2720 2721 s = splnet(); 2722 2723 switch (command) { 2724 case SIOCINITIFADDR: 2725 error = ti_ether_ioctl(ifp, command, data); 2726 break; 2727 case SIOCSIFMTU: 2728 if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > ETHERMTU_JUMBO) 2729 error = EINVAL; 2730 else if ((error = ifioctl_common(ifp, command, data)) 2731 == ENETRESET) { 2732 ti_init(sc); 2733 error = 0; 2734 } 2735 break; 2736 case SIOCSIFFLAGS: 2737 if ((error = ifioctl_common(ifp, command, data)) != 0) 2738 break; 2739 if (ifp->if_flags & IFF_UP) { 2740 /* 2741 * If only the state of the PROMISC flag changed, 2742 * then just use the 'set promisc mode' command 2743 * instead of reinitializing the entire NIC. Doing 2744 * a full re-init means reloading the firmware and 2745 * waiting for it to start up, which may take a 2746 * second or two. 2747 */ 2748 if (ifp->if_flags & IFF_RUNNING && 2749 ifp->if_flags & IFF_PROMISC && 2750 !(sc->ti_if_flags & IFF_PROMISC)) { 2751 TI_DO_CMD(TI_CMD_SET_PROMISC_MODE, 2752 TI_CMD_CODE_PROMISC_ENB, 0); 2753 } else if (ifp->if_flags & IFF_RUNNING && 2754 !(ifp->if_flags & IFF_PROMISC) && 2755 sc->ti_if_flags & IFF_PROMISC) { 2756 TI_DO_CMD(TI_CMD_SET_PROMISC_MODE, 2757 TI_CMD_CODE_PROMISC_DIS, 0); 2758 } else 2759 ti_init(sc); 2760 } else { 2761 if (ifp->if_flags & IFF_RUNNING) { 2762 ti_stop(sc); 2763 } 2764 } 2765 sc->ti_if_flags = ifp->if_flags; 2766 error = 0; 2767 break; 2768 default: 2769 if ((error = ether_ioctl(ifp, command, data)) != ENETRESET) 2770 break; 2771 2772 error = 0; 2773 2774 if (command == SIOCSIFCAP) 2775 ti_init(sc); 2776 else if (command != SIOCADDMULTI && command != SIOCDELMULTI) 2777 ; 2778 else if (ifp->if_flags & IFF_RUNNING) 2779 ti_setmulti(sc); 2780 break; 2781 } 2782 2783 (void)splx(s); 2784 2785 return (error); 2786 } 2787 2788 static void 2789 ti_watchdog(struct ifnet *ifp) 2790 { 2791 struct ti_softc *sc; 2792 2793 sc = ifp->if_softc; 2794 2795 aprint_error_dev(sc->sc_dev, "watchdog timeout -- resetting\n"); 2796 ti_stop(sc); 2797 ti_init(sc); 2798 2799 if_statinc(ifp, if_oerrors); 2800 } 2801 2802 /* 2803 * Stop the adapter and free any mbufs allocated to the 2804 * RX and TX lists. 2805 */ 2806 static void 2807 ti_stop(struct ti_softc *sc) 2808 { 2809 struct ifnet *ifp; 2810 struct ti_cmd_desc cmd; 2811 2812 ifp = &sc->ethercom.ec_if; 2813 2814 /* Disable host interrupts. */ 2815 CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1); 2816 /* 2817 * Tell firmware we're shutting down. 2818 */ 2819 TI_DO_CMD(TI_CMD_HOST_STATE, TI_CMD_CODE_STACK_DOWN, 0); 2820 2821 /* Halt and reinitialize. */ 2822 ti_chipinit(sc); 2823 ti_mem(sc, 0x2000, 0x100000 - 0x2000, NULL); 2824 ti_chipinit(sc); 2825 2826 /* Free the RX lists. */ 2827 ti_free_rx_ring_std(sc); 2828 2829 /* Free jumbo RX list. */ 2830 ti_free_rx_ring_jumbo(sc); 2831 2832 /* Free mini RX list. */ 2833 ti_free_rx_ring_mini(sc); 2834 2835 /* Free TX buffers. */ 2836 ti_free_tx_ring(sc); 2837 2838 sc->ti_ev_prodidx.ti_idx = 0; 2839 sc->ti_return_prodidx.ti_idx = 0; 2840 sc->ti_tx_considx.ti_idx = 0; 2841 sc->ti_tx_saved_considx = TI_TXCONS_UNSET; 2842 2843 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); 2844 } 2845 2846 /* 2847 * Stop all chip I/O so that the kernel's probe routines don't 2848 * get confused by errant DMAs when rebooting. 2849 */ 2850 static bool 2851 ti_shutdown(device_t self, int howto) 2852 { 2853 struct ti_softc *sc; 2854 2855 sc = device_private(self); 2856 ti_chipinit(sc); 2857 2858 return true; 2859 } 2860