xref: /netbsd-src/sys/dev/pci/if_ti.c (revision 1ca5c1b28139779176bd5c13ad7c5f25c0bcd5f8)
1 /* $NetBSD: if_ti.c,v 1.44 2001/11/26 02:41:20 itojun Exp $ */
2 
3 /*
4  * Copyright (c) 1997, 1998, 1999
5  *	Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. All advertising materials mentioning features or use of this software
16  *    must display the following acknowledgement:
17  *	This product includes software developed by Bill Paul.
18  * 4. Neither the name of the author nor the names of any co-contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
26  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32  * THE POSSIBILITY OF SUCH DAMAGE.
33  *
34  *	FreeBSD Id: if_ti.c,v 1.15 1999/08/14 15:45:03 wpaul Exp
35  */
36 
37 /*
38  * Alteon Networks Tigon PCI gigabit ethernet driver for FreeBSD.
39  * Manuals, sample driver and firmware source kits are available
40  * from http://www.alteon.com/support/openkits.
41  *
42  * Written by Bill Paul <wpaul@ctr.columbia.edu>
43  * Electrical Engineering Department
44  * Columbia University, New York City
45  */
46 
47 /*
48  * The Alteon Networks Tigon chip contains an embedded R4000 CPU,
49  * gigabit MAC, dual DMA channels and a PCI interface unit. NICs
50  * using the Tigon may have anywhere from 512K to 2MB of SRAM. The
51  * Tigon supports hardware IP, TCP and UCP checksumming, multicast
52  * filtering and jumbo (9014 byte) frames. The hardware is largely
53  * controlled by firmware, which must be loaded into the NIC during
54  * initialization.
55  *
56  * The Tigon 2 contains 2 R4000 CPUs and requires a newer firmware
57  * revision, which supports new features such as extended commands,
58  * extended jumbo receive ring desciptors and a mini receive ring.
59  *
60  * Alteon Networks is to be commended for releasing such a vast amount
61  * of development material for the Tigon NIC without requiring an NDA
62  * (although they really should have done it a long time ago). With
63  * any luck, the other vendors will finally wise up and follow Alteon's
64  * stellar example.
65  *
66  * The firmware for the Tigon 1 and 2 NICs is compiled directly into
67  * this driver by #including it as a C header file. This bloats the
68  * driver somewhat, but it's the easiest method considering that the
69  * driver code and firmware code need to be kept in sync. The source
70  * for the firmware is not provided with the FreeBSD distribution since
71  * compiling it requires a GNU toolchain targeted for mips-sgi-irix5.3.
72  *
73  * The following people deserve special thanks:
74  * - Terry Murphy of 3Com, for providing a 3c985 Tigon 1 board
75  *   for testing
76  * - Raymond Lee of Netgear, for providing a pair of Netgear
77  *   GA620 Tigon 2 boards for testing
78  * - Ulf Zimmermann, for bringing the GA620 to my attention and
79  *   convincing me to write this driver.
80  * - Andrew Gallatin for providing FreeBSD/Alpha support.
81  */
82 
83 #include <sys/cdefs.h>
84 __KERNEL_RCSID(0, "$NetBSD: if_ti.c,v 1.44 2001/11/26 02:41:20 itojun Exp $");
85 
86 #include "bpfilter.h"
87 #include "opt_inet.h"
88 #include "opt_ns.h"
89 
90 #include <sys/param.h>
91 #include <sys/systm.h>
92 #include <sys/sockio.h>
93 #include <sys/mbuf.h>
94 #include <sys/malloc.h>
95 #include <sys/kernel.h>
96 #include <sys/socket.h>
97 #include <sys/queue.h>
98 #include <sys/device.h>
99 #include <sys/reboot.h>
100 
101 #include <uvm/uvm_extern.h>
102 
103 #include <net/if.h>
104 #include <net/if_arp.h>
105 #include <net/if_ether.h>
106 #include <net/if_dl.h>
107 #include <net/if_media.h>
108 
109 #if NBPFILTER > 0
110 #include <net/bpf.h>
111 #endif
112 
113 #ifdef INET
114 #include <netinet/in.h>
115 #include <netinet/if_inarp.h>
116 #include <netinet/in_systm.h>
117 #include <netinet/ip.h>
118 #endif
119 
120 #ifdef NS
121 #include <netns/ns.h>
122 #include <netns/ns_if.h>
123 #endif
124 
125 #include <machine/bus.h>
126 
127 #include <dev/pci/pcireg.h>
128 #include <dev/pci/pcivar.h>
129 #include <dev/pci/pcidevs.h>
130 
131 #include <dev/pci/if_tireg.h>
132 
133 #include <dev/microcode/tigon/ti_fw.h>
134 #include <dev/microcode/tigon/ti_fw2.h>
135 
136 /*
137  * Various supported device vendors/types and their names.
138  */
139 
140 static const struct ti_type ti_devs[] = {
141 	{ PCI_VENDOR_ALTEON,	PCI_PRODUCT_ALTEON_ACENIC,
142 		"Alteon AceNIC 1000BASE-SX Ethernet" },
143 	{ PCI_VENDOR_ALTEON,	PCI_PRODUCT_ALTEON_ACENIC_COPPER,
144 		"Alteon AceNIC 1000BASE-T Ethernet" },
145 	{ PCI_VENDOR_3COM,	PCI_PRODUCT_3COM_3C985,
146 		"3Com 3c985-SX Gigabit Ethernet" },
147 	{ PCI_VENDOR_NETGEAR, PCI_PRODUCT_NETGEAR_GA620,
148 		"Netgear GA620 1000BASE-SX Ethernet" },
149 	{ PCI_VENDOR_NETGEAR, PCI_PRODUCT_NETGEAR_GA620T,
150 		"Netgear GA620 1000BASE-T Ethernet" },
151 	{ PCI_VENDOR_SGI, PCI_PRODUCT_SGI_TIGON,
152 		"Silicon Graphics Gigabit Ethernet" },
153 	{ 0, 0, NULL }
154 };
155 
156 static const struct ti_type *ti_type_match __P((struct pci_attach_args *));
157 static int ti_probe	__P((struct device *, struct cfdata *, void *));
158 static void ti_attach	__P((struct device *, struct device *, void *));
159 static void ti_shutdown __P((void *));
160 static void ti_txeof_tigon1	__P((struct ti_softc *));
161 static void ti_txeof_tigon2	__P((struct ti_softc *));
162 static void ti_rxeof		__P((struct ti_softc *));
163 
164 static void ti_stats_update	__P((struct ti_softc *));
165 static int ti_encap_tigon1	__P((struct ti_softc *, struct mbuf *,
166 					u_int32_t *));
167 static int ti_encap_tigon2	__P((struct ti_softc *, struct mbuf *,
168 					u_int32_t *));
169 
170 static int ti_intr		__P((void *));
171 static void ti_start		__P((struct ifnet *));
172 static int ti_ioctl		__P((struct ifnet *, u_long, caddr_t));
173 static void ti_init		__P((void *));
174 static void ti_init2		__P((struct ti_softc *));
175 static void ti_stop		__P((struct ti_softc *));
176 static void ti_watchdog		__P((struct ifnet *));
177 static int ti_ifmedia_upd	__P((struct ifnet *));
178 static void ti_ifmedia_sts	__P((struct ifnet *, struct ifmediareq *));
179 
180 static u_int32_t ti_eeprom_putbyte	__P((struct ti_softc *, int));
181 static u_int8_t	ti_eeprom_getbyte	__P((struct ti_softc *,
182 						int, u_int8_t *));
183 static int ti_read_eeprom	__P((struct ti_softc *, caddr_t, int, int));
184 
185 static void ti_add_mcast	__P((struct ti_softc *, struct ether_addr *));
186 static void ti_del_mcast	__P((struct ti_softc *, struct ether_addr *));
187 static void ti_setmulti		__P((struct ti_softc *));
188 
189 static void ti_mem		__P((struct ti_softc *, u_int32_t,
190 					u_int32_t, caddr_t));
191 static void ti_loadfw		__P((struct ti_softc *));
192 static void ti_cmd		__P((struct ti_softc *, struct ti_cmd_desc *));
193 static void ti_cmd_ext		__P((struct ti_softc *, struct ti_cmd_desc *,
194 					caddr_t, int));
195 static void ti_handle_events	__P((struct ti_softc *));
196 static int ti_alloc_jumbo_mem	__P((struct ti_softc *));
197 static void *ti_jalloc		__P((struct ti_softc *));
198 static void ti_jfree		__P((caddr_t, u_int, void *));
199 static int ti_newbuf_std	__P((struct ti_softc *, int, struct mbuf *, bus_dmamap_t));
200 static int ti_newbuf_mini	__P((struct ti_softc *, int, struct mbuf *, bus_dmamap_t));
201 static int ti_newbuf_jumbo	__P((struct ti_softc *, int, struct mbuf *));
202 static int ti_init_rx_ring_std	__P((struct ti_softc *));
203 static void ti_free_rx_ring_std	__P((struct ti_softc *));
204 static int ti_init_rx_ring_jumbo	__P((struct ti_softc *));
205 static void ti_free_rx_ring_jumbo	__P((struct ti_softc *));
206 static int ti_init_rx_ring_mini	__P((struct ti_softc *));
207 static void ti_free_rx_ring_mini	__P((struct ti_softc *));
208 static void ti_free_tx_ring	__P((struct ti_softc *));
209 static int ti_init_tx_ring	__P((struct ti_softc *));
210 
211 static int ti_64bitslot_war	__P((struct ti_softc *));
212 static int ti_chipinit		__P((struct ti_softc *));
213 static int ti_gibinit		__P((struct ti_softc *));
214 
215 static int ti_ether_ioctl __P((struct ifnet *, u_long, caddr_t));
216 
217 struct cfattach ti_ca = {
218 	sizeof(struct ti_softc), ti_probe, ti_attach
219 };
220 
221 /*
222  * Send an instruction or address to the EEPROM, check for ACK.
223  */
224 static u_int32_t ti_eeprom_putbyte(sc, byte)
225 	struct ti_softc		*sc;
226 	int			byte;
227 {
228 	int		i, ack = 0;
229 
230 	/*
231 	 * Make sure we're in TX mode.
232 	 */
233 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN);
234 
235 	/*
236 	 * Feed in each bit and stobe the clock.
237 	 */
238 	for (i = 0x80; i; i >>= 1) {
239 		if (byte & i) {
240 			TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT);
241 		} else {
242 			TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_DOUT);
243 		}
244 		DELAY(1);
245 		TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
246 		DELAY(1);
247 		TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
248 	}
249 
250 	/*
251 	 * Turn off TX mode.
252 	 */
253 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN);
254 
255 	/*
256 	 * Check for ack.
257 	 */
258 	TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
259 	ack = CSR_READ_4(sc, TI_MISC_LOCAL_CTL) & TI_MLC_EE_DIN;
260 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
261 
262 	return(ack);
263 }
264 
265 /*
266  * Read a byte of data stored in the EEPROM at address 'addr.'
267  * We have to send two address bytes since the EEPROM can hold
268  * more than 256 bytes of data.
269  */
270 static u_int8_t ti_eeprom_getbyte(sc, addr, dest)
271 	struct ti_softc		*sc;
272 	int			addr;
273 	u_int8_t		*dest;
274 {
275 	int		i;
276 	u_int8_t		byte = 0;
277 
278 	EEPROM_START;
279 
280 	/*
281 	 * Send write control code to EEPROM.
282 	 */
283 	if (ti_eeprom_putbyte(sc, EEPROM_CTL_WRITE)) {
284 		printf("%s: failed to send write command, status: %x\n",
285 		    sc->sc_dev.dv_xname, CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
286 		return(1);
287 	}
288 
289 	/*
290 	 * Send first byte of address of byte we want to read.
291 	 */
292 	if (ti_eeprom_putbyte(sc, (addr >> 8) & 0xFF)) {
293 		printf("%s: failed to send address, status: %x\n",
294 		    sc->sc_dev.dv_xname, CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
295 		return(1);
296 	}
297 	/*
298 	 * Send second byte address of byte we want to read.
299 	 */
300 	if (ti_eeprom_putbyte(sc, addr & 0xFF)) {
301 		printf("%s: failed to send address, status: %x\n",
302 		    sc->sc_dev.dv_xname, CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
303 		return(1);
304 	}
305 
306 	EEPROM_STOP;
307 	EEPROM_START;
308 	/*
309 	 * Send read control code to EEPROM.
310 	 */
311 	if (ti_eeprom_putbyte(sc, EEPROM_CTL_READ)) {
312 		printf("%s: failed to send read command, status: %x\n",
313 		    sc->sc_dev.dv_xname, CSR_READ_4(sc, TI_MISC_LOCAL_CTL));
314 		return(1);
315 	}
316 
317 	/*
318 	 * Start reading bits from EEPROM.
319 	 */
320 	TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_TXEN);
321 	for (i = 0x80; i; i >>= 1) {
322 		TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
323 		DELAY(1);
324 		if (CSR_READ_4(sc, TI_MISC_LOCAL_CTL) & TI_MLC_EE_DIN)
325 			byte |= i;
326 		TI_CLRBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_EE_CLK);
327 		DELAY(1);
328 	}
329 
330 	EEPROM_STOP;
331 
332 	/*
333 	 * No ACK generated for read, so just return byte.
334 	 */
335 
336 	*dest = byte;
337 
338 	return(0);
339 }
340 
341 /*
342  * Read a sequence of bytes from the EEPROM.
343  */
344 static int ti_read_eeprom(sc, dest, off, cnt)
345 	struct ti_softc		*sc;
346 	caddr_t			dest;
347 	int			off;
348 	int			cnt;
349 {
350 	int			err = 0, i;
351 	u_int8_t		byte = 0;
352 
353 	for (i = 0; i < cnt; i++) {
354 		err = ti_eeprom_getbyte(sc, off + i, &byte);
355 		if (err)
356 			break;
357 		*(dest + i) = byte;
358 	}
359 
360 	return(err ? 1 : 0);
361 }
362 
363 /*
364  * NIC memory access function. Can be used to either clear a section
365  * of NIC local memory or (if buf is non-NULL) copy data into it.
366  */
367 static void ti_mem(sc, addr, len, buf)
368 	struct ti_softc		*sc;
369 	u_int32_t		addr, len;
370 	caddr_t			buf;
371 {
372 	int			segptr, segsize, cnt;
373 	caddr_t			ptr;
374 
375 	segptr = addr;
376 	cnt = len;
377 	ptr = buf;
378 
379 	while(cnt) {
380 		if (cnt < TI_WINLEN)
381 			segsize = cnt;
382 		else
383 			segsize = TI_WINLEN - (segptr % TI_WINLEN);
384 		CSR_WRITE_4(sc, TI_WINBASE, (segptr & ~(TI_WINLEN - 1)));
385 		if (buf == NULL) {
386 			bus_space_set_region_4(sc->ti_btag, sc->ti_bhandle,
387 			    TI_WINDOW + (segptr & (TI_WINLEN - 1)), 0,
388 			    segsize / 4);
389 		} else {
390 			bus_space_write_region_4(sc->ti_btag, sc->ti_bhandle,
391 			    TI_WINDOW + (segptr & (TI_WINLEN - 1)),
392 			    (u_int32_t *)ptr, segsize / 4);
393 			ptr += segsize;
394 		}
395 		segptr += segsize;
396 		cnt -= segsize;
397 	}
398 
399 	return;
400 }
401 
402 /*
403  * Load firmware image into the NIC. Check that the firmware revision
404  * is acceptable and see if we want the firmware for the Tigon 1 or
405  * Tigon 2.
406  */
407 static void ti_loadfw(sc)
408 	struct ti_softc		*sc;
409 {
410 	switch(sc->ti_hwrev) {
411 	case TI_HWREV_TIGON:
412 		if (tigonFwReleaseMajor != TI_FIRMWARE_MAJOR ||
413 		    tigonFwReleaseMinor != TI_FIRMWARE_MINOR ||
414 		    tigonFwReleaseFix != TI_FIRMWARE_FIX) {
415 			printf("%s: firmware revision mismatch; want "
416 			    "%d.%d.%d, got %d.%d.%d\n", sc->sc_dev.dv_xname,
417 			    TI_FIRMWARE_MAJOR, TI_FIRMWARE_MINOR,
418 			    TI_FIRMWARE_FIX, tigonFwReleaseMajor,
419 			    tigonFwReleaseMinor, tigonFwReleaseFix);
420 			return;
421 		}
422 		ti_mem(sc, tigonFwTextAddr, tigonFwTextLen,
423 		    (caddr_t)tigonFwText);
424 		ti_mem(sc, tigonFwDataAddr, tigonFwDataLen,
425 		    (caddr_t)tigonFwData);
426 		ti_mem(sc, tigonFwRodataAddr, tigonFwRodataLen,
427 		    (caddr_t)tigonFwRodata);
428 		ti_mem(sc, tigonFwBssAddr, tigonFwBssLen, NULL);
429 		ti_mem(sc, tigonFwSbssAddr, tigonFwSbssLen, NULL);
430 		CSR_WRITE_4(sc, TI_CPU_PROGRAM_COUNTER, tigonFwStartAddr);
431 		break;
432 	case TI_HWREV_TIGON_II:
433 		if (tigon2FwReleaseMajor != TI_FIRMWARE_MAJOR ||
434 		    tigon2FwReleaseMinor != TI_FIRMWARE_MINOR ||
435 		    tigon2FwReleaseFix != TI_FIRMWARE_FIX) {
436 			printf("%s: firmware revision mismatch; want "
437 			    "%d.%d.%d, got %d.%d.%d\n", sc->sc_dev.dv_xname,
438 			    TI_FIRMWARE_MAJOR, TI_FIRMWARE_MINOR,
439 			    TI_FIRMWARE_FIX, tigon2FwReleaseMajor,
440 			    tigon2FwReleaseMinor, tigon2FwReleaseFix);
441 			return;
442 		}
443 		ti_mem(sc, tigon2FwTextAddr, tigon2FwTextLen,
444 		    (caddr_t)tigon2FwText);
445 		ti_mem(sc, tigon2FwDataAddr, tigon2FwDataLen,
446 		    (caddr_t)tigon2FwData);
447 		ti_mem(sc, tigon2FwRodataAddr, tigon2FwRodataLen,
448 		    (caddr_t)tigon2FwRodata);
449 		ti_mem(sc, tigon2FwBssAddr, tigon2FwBssLen, NULL);
450 		ti_mem(sc, tigon2FwSbssAddr, tigon2FwSbssLen, NULL);
451 		CSR_WRITE_4(sc, TI_CPU_PROGRAM_COUNTER, tigon2FwStartAddr);
452 		break;
453 	default:
454 		printf("%s: can't load firmware: unknown hardware rev\n",
455 		    sc->sc_dev.dv_xname);
456 		break;
457 	}
458 
459 	return;
460 }
461 
462 /*
463  * Send the NIC a command via the command ring.
464  */
465 static void ti_cmd(sc, cmd)
466 	struct ti_softc		*sc;
467 	struct ti_cmd_desc	*cmd;
468 {
469 	u_int32_t		index;
470 
471 	index = sc->ti_cmd_saved_prodidx;
472 	CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4), *(u_int32_t *)(cmd));
473 	TI_INC(index, TI_CMD_RING_CNT);
474 	CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, index);
475 	sc->ti_cmd_saved_prodidx = index;
476 
477 	return;
478 }
479 
480 /*
481  * Send the NIC an extended command. The 'len' parameter specifies the
482  * number of command slots to include after the initial command.
483  */
484 static void ti_cmd_ext(sc, cmd, arg, len)
485 	struct ti_softc		*sc;
486 	struct ti_cmd_desc	*cmd;
487 	caddr_t			arg;
488 	int			len;
489 {
490 	u_int32_t		index;
491 	int		i;
492 
493 	index = sc->ti_cmd_saved_prodidx;
494 	CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4), *(u_int32_t *)(cmd));
495 	TI_INC(index, TI_CMD_RING_CNT);
496 	for (i = 0; i < len; i++) {
497 		CSR_WRITE_4(sc, TI_GCR_CMDRING + (index * 4),
498 		    *(u_int32_t *)(&arg[i * 4]));
499 		TI_INC(index, TI_CMD_RING_CNT);
500 	}
501 	CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, index);
502 	sc->ti_cmd_saved_prodidx = index;
503 
504 	return;
505 }
506 
507 /*
508  * Handle events that have triggered interrupts.
509  */
510 static void ti_handle_events(sc)
511 	struct ti_softc		*sc;
512 {
513 	struct ti_event_desc	*e;
514 
515 	if (sc->ti_rdata->ti_event_ring == NULL)
516 		return;
517 
518 	while (sc->ti_ev_saved_considx != sc->ti_ev_prodidx.ti_idx) {
519 		e = &sc->ti_rdata->ti_event_ring[sc->ti_ev_saved_considx];
520 		switch(e->ti_event) {
521 		case TI_EV_LINKSTAT_CHANGED:
522 			sc->ti_linkstat = e->ti_code;
523 			if (e->ti_code == TI_EV_CODE_LINK_UP)
524 				printf("%s: 10/100 link up\n",
525 				       sc->sc_dev.dv_xname);
526 			else if (e->ti_code == TI_EV_CODE_GIG_LINK_UP)
527 				printf("%s: gigabit link up\n",
528 				       sc->sc_dev.dv_xname);
529 			else if (e->ti_code == TI_EV_CODE_LINK_DOWN)
530 				printf("%s: link down\n",
531 				       sc->sc_dev.dv_xname);
532 			break;
533 		case TI_EV_ERROR:
534 			if (e->ti_code == TI_EV_CODE_ERR_INVAL_CMD)
535 				printf("%s: invalid command\n",
536 				       sc->sc_dev.dv_xname);
537 			else if (e->ti_code == TI_EV_CODE_ERR_UNIMP_CMD)
538 				printf("%s: unknown command\n",
539 				       sc->sc_dev.dv_xname);
540 			else if (e->ti_code == TI_EV_CODE_ERR_BADCFG)
541 				printf("%s: bad config data\n",
542 				       sc->sc_dev.dv_xname);
543 			break;
544 		case TI_EV_FIRMWARE_UP:
545 			ti_init2(sc);
546 			break;
547 		case TI_EV_STATS_UPDATED:
548 			ti_stats_update(sc);
549 			break;
550 		case TI_EV_RESET_JUMBO_RING:
551 		case TI_EV_MCAST_UPDATED:
552 			/* Who cares. */
553 			break;
554 		default:
555 			printf("%s: unknown event: %d\n",
556 			    sc->sc_dev.dv_xname, e->ti_event);
557 			break;
558 		}
559 		/* Advance the consumer index. */
560 		TI_INC(sc->ti_ev_saved_considx, TI_EVENT_RING_CNT);
561 		CSR_WRITE_4(sc, TI_GCR_EVENTCONS_IDX, sc->ti_ev_saved_considx);
562 	}
563 
564 	return;
565 }
566 
567 /*
568  * Memory management for the jumbo receive ring is a pain in the
569  * butt. We need to allocate at least 9018 bytes of space per frame,
570  * _and_ it has to be contiguous (unless you use the extended
571  * jumbo descriptor format). Using malloc() all the time won't
572  * work: malloc() allocates memory in powers of two, which means we
573  * would end up wasting a considerable amount of space by allocating
574  * 9K chunks. We don't have a jumbo mbuf cluster pool. Thus, we have
575  * to do our own memory management.
576  *
577  * The driver needs to allocate a contiguous chunk of memory at boot
578  * time. We then chop this up ourselves into 9K pieces and use them
579  * as external mbuf storage.
580  *
581  * One issue here is how much memory to allocate. The jumbo ring has
582  * 256 slots in it, but at 9K per slot than can consume over 2MB of
583  * RAM. This is a bit much, especially considering we also need
584  * RAM for the standard ring and mini ring (on the Tigon 2). To
585  * save space, we only actually allocate enough memory for 64 slots
586  * by default, which works out to between 500 and 600K. This can
587  * be tuned by changing a #define in if_tireg.h.
588  */
589 
590 static int ti_alloc_jumbo_mem(sc)
591 	struct ti_softc		*sc;
592 {
593 	caddr_t			ptr;
594 	int		i;
595 	struct ti_jpool_entry   *entry;
596 	bus_dma_segment_t dmaseg;
597 	int error, dmanseg;
598 
599 	/* Grab a big chunk o' storage. */
600 	if ((error = bus_dmamem_alloc(sc->sc_dmat,
601 	    TI_JMEM, PAGE_SIZE, 0, &dmaseg, 1, &dmanseg,
602 	    BUS_DMA_NOWAIT)) != 0) {
603 		printf("%s: can't allocate jumbo buffer, error = %d\n",
604 		       sc->sc_dev.dv_xname, error);
605 		return (error);
606 	}
607 
608 	if ((error = bus_dmamem_map(sc->sc_dmat, &dmaseg, dmanseg,
609 	    TI_JMEM, (caddr_t *)&sc->ti_cdata.ti_jumbo_buf,
610 	    BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
611 		printf("%s: can't map jumbo buffer, error = %d\n",
612 		       sc->sc_dev.dv_xname, error);
613 		return (error);
614 	}
615 
616 	if ((error = bus_dmamap_create(sc->sc_dmat,
617 	    TI_JMEM, 1,
618 	    TI_JMEM, 0, BUS_DMA_NOWAIT,
619 	    &sc->jumbo_dmamap)) != 0) {
620 		printf("%s: can't create jumbo buffer DMA map, error = %d\n",
621 		       sc->sc_dev.dv_xname, error);
622 		return (error);
623 	}
624 
625 	if ((error = bus_dmamap_load(sc->sc_dmat, sc->jumbo_dmamap,
626 	    sc->ti_cdata.ti_jumbo_buf, TI_JMEM, NULL,
627 	    BUS_DMA_NOWAIT)) != 0) {
628 		printf("%s: can't load jumbo buffer DMA map, error = %d\n",
629 		       sc->sc_dev.dv_xname, error);
630 		return (error);
631 	}
632 	sc->jumbo_dmaaddr = sc->jumbo_dmamap->dm_segs[0].ds_addr;
633 
634 	SIMPLEQ_INIT(&sc->ti_jfree_listhead);
635 	SIMPLEQ_INIT(&sc->ti_jinuse_listhead);
636 
637 	/*
638 	 * Now divide it up into 9K pieces and save the addresses
639 	 * in an array.
640 	 */
641 	ptr = sc->ti_cdata.ti_jumbo_buf;
642 	for (i = 0; i < TI_JSLOTS; i++) {
643 		sc->ti_cdata.ti_jslots[i] = ptr;
644 		ptr += TI_JLEN;
645 		entry = malloc(sizeof(struct ti_jpool_entry),
646 			       M_DEVBUF, M_NOWAIT);
647 		if (entry == NULL) {
648 			free(sc->ti_cdata.ti_jumbo_buf, M_DEVBUF);
649 			sc->ti_cdata.ti_jumbo_buf = NULL;
650 			printf("%s: no memory for jumbo "
651 			    "buffer queue!\n", sc->sc_dev.dv_xname);
652 			return(ENOBUFS);
653 		}
654 		entry->slot = i;
655 		SIMPLEQ_INSERT_HEAD(&sc->ti_jfree_listhead, entry,
656 				    jpool_entries);
657 	}
658 
659 	return(0);
660 }
661 
662 /*
663  * Allocate a jumbo buffer.
664  */
665 static void *ti_jalloc(sc)
666 	struct ti_softc		*sc;
667 {
668 	struct ti_jpool_entry   *entry;
669 
670 	entry = SIMPLEQ_FIRST(&sc->ti_jfree_listhead);
671 
672 	if (entry == NULL) {
673 		printf("%s: no free jumbo buffers\n", sc->sc_dev.dv_xname);
674 		return(NULL);
675 	}
676 
677 	SIMPLEQ_REMOVE_HEAD(&sc->ti_jfree_listhead, entry, jpool_entries);
678 	SIMPLEQ_INSERT_HEAD(&sc->ti_jinuse_listhead, entry, jpool_entries);
679 	return(sc->ti_cdata.ti_jslots[entry->slot]);
680 }
681 
682 /*
683  * Release a jumbo buffer.
684  */
685 static void ti_jfree(buf, size, arg)
686 	caddr_t			buf;
687 	u_int			size;
688 	void *arg;
689 {
690 	struct ti_softc		*sc;
691 	int		        i;
692 	struct ti_jpool_entry   *entry;
693 
694 	/* Extract the softc struct pointer. */
695 	sc = (struct ti_softc *)arg;
696 
697 	if (sc == NULL)
698 		panic("ti_jfree: didn't get softc pointer!");
699 
700 	/* calculate the slot this buffer belongs to */
701 
702 	i = ((caddr_t)buf
703 	     - (caddr_t)sc->ti_cdata.ti_jumbo_buf) / TI_JLEN;
704 
705 	if ((i < 0) || (i >= TI_JSLOTS))
706 		panic("ti_jfree: asked to free buffer that we don't manage!");
707 	entry = SIMPLEQ_FIRST(&sc->ti_jinuse_listhead);
708 	if (entry == NULL)
709 		panic("ti_jfree: buffer not in use!");
710 	entry->slot = i;
711 	SIMPLEQ_REMOVE_HEAD(&sc->ti_jinuse_listhead,
712 	    entry, jpool_entries);
713 	SIMPLEQ_INSERT_HEAD(&sc->ti_jfree_listhead,
714 	     entry, jpool_entries);
715 
716 	return;
717 }
718 
719 
720 /*
721  * Intialize a standard receive ring descriptor.
722  */
723 static int ti_newbuf_std(sc, i, m, dmamap)
724 	struct ti_softc		*sc;
725 	int			i;
726 	struct mbuf		*m;
727 	bus_dmamap_t dmamap; /* required if (m != NULL) */
728 {
729 	struct mbuf		*m_new = NULL;
730 	struct ti_rx_desc	*r;
731 	int error;
732 
733 	if (dmamap == NULL) {
734 		/* if (m) panic() */
735 
736 		if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
737 					       MCLBYTES, 0, BUS_DMA_NOWAIT,
738 					       &dmamap)) != 0) {
739 			printf("%s: can't create recv map, error = %d\n",
740 			       sc->sc_dev.dv_xname, error);
741 			return(ENOMEM);
742 		}
743 	}
744 	sc->std_dmamap[i] = dmamap;
745 
746 	if (m == NULL) {
747 		MGETHDR(m_new, M_DONTWAIT, MT_DATA);
748 		if (m_new == NULL) {
749 			printf("%s: mbuf allocation failed "
750 			    "-- packet dropped!\n", sc->sc_dev.dv_xname);
751 			return(ENOBUFS);
752 		}
753 
754 		MCLGET(m_new, M_DONTWAIT);
755 		if (!(m_new->m_flags & M_EXT)) {
756 			printf("%s: cluster allocation failed "
757 			    "-- packet dropped!\n", sc->sc_dev.dv_xname);
758 			m_freem(m_new);
759 			return(ENOBUFS);
760 		}
761 		m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
762 		m_adj(m_new, ETHER_ALIGN);
763 
764 		if ((error = bus_dmamap_load(sc->sc_dmat, dmamap,
765 				mtod(m_new, caddr_t), m_new->m_len, NULL,
766 				BUS_DMA_READ|BUS_DMA_NOWAIT)) != 0) {
767 			printf("%s: can't load recv map, error = %d\n",
768 			       sc->sc_dev.dv_xname, error);
769 			return (ENOMEM);
770 		}
771 	} else {
772 		m_new = m;
773 		m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
774 		m_new->m_data = m_new->m_ext.ext_buf;
775 		m_adj(m_new, ETHER_ALIGN);
776 
777 		/* reuse the dmamap */
778 	}
779 
780 	sc->ti_cdata.ti_rx_std_chain[i] = m_new;
781 	r = &sc->ti_rdata->ti_rx_std_ring[i];
782 	TI_HOSTADDR(r->ti_addr) = dmamap->dm_segs[0].ds_addr;
783 	r->ti_type = TI_BDTYPE_RECV_BD;
784 	r->ti_flags = 0;
785 	if (sc->ethercom.ec_if.if_capenable & IFCAP_CSUM_IPv4)
786 		r->ti_flags |= TI_BDFLAG_IP_CKSUM;
787 	if (sc->ethercom.ec_if.if_capenable &
788 	    (IFCAP_CSUM_TCPv4|IFCAP_CSUM_UDPv4))
789 		r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM;
790 	r->ti_len = m_new->m_len; /* == ds_len */
791 	r->ti_idx = i;
792 
793 	return(0);
794 }
795 
796 /*
797  * Intialize a mini receive ring descriptor. This only applies to
798  * the Tigon 2.
799  */
800 static int ti_newbuf_mini(sc, i, m, dmamap)
801 	struct ti_softc		*sc;
802 	int			i;
803 	struct mbuf		*m;
804 	bus_dmamap_t dmamap; /* required if (m != NULL) */
805 {
806 	struct mbuf		*m_new = NULL;
807 	struct ti_rx_desc	*r;
808 	int error;
809 
810 	if (dmamap == NULL) {
811 		/* if (m) panic() */
812 
813 		if ((error = bus_dmamap_create(sc->sc_dmat, MHLEN, 1,
814 					       MHLEN, 0, BUS_DMA_NOWAIT,
815 					       &dmamap)) != 0) {
816 			printf("%s: can't create recv map, error = %d\n",
817 			       sc->sc_dev.dv_xname, error);
818 			return(ENOMEM);
819 		}
820 	}
821 	sc->mini_dmamap[i] = dmamap;
822 
823 	if (m == NULL) {
824 		MGETHDR(m_new, M_DONTWAIT, MT_DATA);
825 		if (m_new == NULL) {
826 			printf("%s: mbuf allocation failed "
827 			    "-- packet dropped!\n", sc->sc_dev.dv_xname);
828 			return(ENOBUFS);
829 		}
830 		m_new->m_len = m_new->m_pkthdr.len = MHLEN;
831 		m_adj(m_new, ETHER_ALIGN);
832 
833 		if ((error = bus_dmamap_load(sc->sc_dmat, dmamap,
834 				mtod(m_new, caddr_t), m_new->m_len, NULL,
835 				BUS_DMA_READ|BUS_DMA_NOWAIT)) != 0) {
836 			printf("%s: can't load recv map, error = %d\n",
837 			       sc->sc_dev.dv_xname, error);
838 			return (ENOMEM);
839 		}
840 	} else {
841 		m_new = m;
842 		m_new->m_data = m_new->m_pktdat;
843 		m_new->m_len = m_new->m_pkthdr.len = MHLEN;
844 		m_adj(m_new, ETHER_ALIGN);
845 
846 		/* reuse the dmamap */
847 	}
848 
849 	r = &sc->ti_rdata->ti_rx_mini_ring[i];
850 	sc->ti_cdata.ti_rx_mini_chain[i] = m_new;
851 	TI_HOSTADDR(r->ti_addr) = dmamap->dm_segs[0].ds_addr;
852 	r->ti_type = TI_BDTYPE_RECV_BD;
853 	r->ti_flags = TI_BDFLAG_MINI_RING;
854 	if (sc->ethercom.ec_if.if_capenable & IFCAP_CSUM_IPv4)
855 		r->ti_flags |= TI_BDFLAG_IP_CKSUM;
856 	if (sc->ethercom.ec_if.if_capenable &
857 	    (IFCAP_CSUM_TCPv4|IFCAP_CSUM_UDPv4))
858 		r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM;
859 	r->ti_len = m_new->m_len; /* == ds_len */
860 	r->ti_idx = i;
861 
862 	return(0);
863 }
864 
865 /*
866  * Initialize a jumbo receive ring descriptor. This allocates
867  * a jumbo buffer from the pool managed internally by the driver.
868  */
869 static int ti_newbuf_jumbo(sc, i, m)
870 	struct ti_softc		*sc;
871 	int			i;
872 	struct mbuf		*m;
873 {
874 	struct mbuf		*m_new = NULL;
875 	struct ti_rx_desc	*r;
876 
877 	if (m == NULL) {
878 		caddr_t			*buf = NULL;
879 
880 		/* Allocate the mbuf. */
881 		MGETHDR(m_new, M_DONTWAIT, MT_DATA);
882 		if (m_new == NULL) {
883 			printf("%s: mbuf allocation failed "
884 			    "-- packet dropped!\n", sc->sc_dev.dv_xname);
885 			return(ENOBUFS);
886 		}
887 
888 		/* Allocate the jumbo buffer */
889 		buf = ti_jalloc(sc);
890 		if (buf == NULL) {
891 			m_freem(m_new);
892 			printf("%s: jumbo allocation failed "
893 			    "-- packet dropped!\n", sc->sc_dev.dv_xname);
894 			return(ENOBUFS);
895 		}
896 
897 		/* Attach the buffer to the mbuf. */
898 		m_new->m_data = m_new->m_ext.ext_buf = (void *)buf;
899 		m_new->m_flags |= M_EXT;
900 		m_new->m_len = m_new->m_pkthdr.len =
901 		    m_new->m_ext.ext_size = ETHER_MAX_LEN_JUMBO;
902 		m_new->m_ext.ext_free = ti_jfree;
903 		m_new->m_ext.ext_arg = sc;
904 		MCLINITREFERENCE(m_new);
905 	} else {
906 		m_new = m;
907 		m_new->m_data = m_new->m_ext.ext_buf;
908 		m_new->m_ext.ext_size = ETHER_MAX_LEN_JUMBO;
909 	}
910 
911 	m_adj(m_new, ETHER_ALIGN);
912 	/* Set up the descriptor. */
913 	r = &sc->ti_rdata->ti_rx_jumbo_ring[i];
914 	sc->ti_cdata.ti_rx_jumbo_chain[i] = m_new;
915 	TI_HOSTADDR(r->ti_addr) = sc->jumbo_dmaaddr +
916 		((caddr_t)mtod(m_new, caddr_t)
917 		 - (caddr_t)sc->ti_cdata.ti_jumbo_buf);
918 	r->ti_type = TI_BDTYPE_RECV_JUMBO_BD;
919 	r->ti_flags = TI_BDFLAG_JUMBO_RING;
920 	if (sc->ethercom.ec_if.if_capenable & IFCAP_CSUM_IPv4)
921 		r->ti_flags |= TI_BDFLAG_IP_CKSUM;
922 	if (sc->ethercom.ec_if.if_capenable &
923 	    (IFCAP_CSUM_TCPv4|IFCAP_CSUM_UDPv4))
924 		r->ti_flags |= TI_BDFLAG_TCP_UDP_CKSUM;
925 	r->ti_len = m_new->m_len;
926 	r->ti_idx = i;
927 
928 	return(0);
929 }
930 
931 /*
932  * The standard receive ring has 512 entries in it. At 2K per mbuf cluster,
933  * that's 1MB or memory, which is a lot. For now, we fill only the first
934  * 256 ring entries and hope that our CPU is fast enough to keep up with
935  * the NIC.
936  */
937 static int ti_init_rx_ring_std(sc)
938 	struct ti_softc		*sc;
939 {
940 	int		i;
941 	struct ti_cmd_desc	cmd;
942 
943 	for (i = 0; i < TI_SSLOTS; i++) {
944 		if (ti_newbuf_std(sc, i, NULL, 0) == ENOBUFS)
945 			return(ENOBUFS);
946 	};
947 
948 	TI_UPDATE_STDPROD(sc, i - 1);
949 	sc->ti_std = i - 1;
950 
951 	return(0);
952 }
953 
954 static void ti_free_rx_ring_std(sc)
955 	struct ti_softc		*sc;
956 {
957 	int		i;
958 
959 	for (i = 0; i < TI_STD_RX_RING_CNT; i++) {
960 		if (sc->ti_cdata.ti_rx_std_chain[i] != NULL) {
961 			m_freem(sc->ti_cdata.ti_rx_std_chain[i]);
962 			sc->ti_cdata.ti_rx_std_chain[i] = NULL;
963 
964 			/* if (sc->std_dmamap[i] == 0) panic() */
965 			bus_dmamap_destroy(sc->sc_dmat, sc->std_dmamap[i]);
966 			sc->std_dmamap[i] = 0;
967 		}
968 		memset((char *)&sc->ti_rdata->ti_rx_std_ring[i], 0,
969 		    sizeof(struct ti_rx_desc));
970 	}
971 
972 	return;
973 }
974 
975 static int ti_init_rx_ring_jumbo(sc)
976 	struct ti_softc		*sc;
977 {
978 	int		i;
979 	struct ti_cmd_desc	cmd;
980 
981 	for (i = 0; i < (TI_JSLOTS - 20); i++) {
982 		if (ti_newbuf_jumbo(sc, i, NULL) == ENOBUFS)
983 			return(ENOBUFS);
984 	};
985 
986 	TI_UPDATE_JUMBOPROD(sc, i - 1);
987 	sc->ti_jumbo = i - 1;
988 
989 	return(0);
990 }
991 
992 static void ti_free_rx_ring_jumbo(sc)
993 	struct ti_softc		*sc;
994 {
995 	int		i;
996 
997 	for (i = 0; i < TI_JUMBO_RX_RING_CNT; i++) {
998 		if (sc->ti_cdata.ti_rx_jumbo_chain[i] != NULL) {
999 			m_freem(sc->ti_cdata.ti_rx_jumbo_chain[i]);
1000 			sc->ti_cdata.ti_rx_jumbo_chain[i] = NULL;
1001 		}
1002 		memset((char *)&sc->ti_rdata->ti_rx_jumbo_ring[i], 0,
1003 		    sizeof(struct ti_rx_desc));
1004 	}
1005 
1006 	return;
1007 }
1008 
1009 static int ti_init_rx_ring_mini(sc)
1010 	struct ti_softc		*sc;
1011 {
1012 	int		i;
1013 
1014 	for (i = 0; i < TI_MSLOTS; i++) {
1015 		if (ti_newbuf_mini(sc, i, NULL, 0) == ENOBUFS)
1016 			return(ENOBUFS);
1017 	};
1018 
1019 	TI_UPDATE_MINIPROD(sc, i - 1);
1020 	sc->ti_mini = i - 1;
1021 
1022 	return(0);
1023 }
1024 
1025 static void ti_free_rx_ring_mini(sc)
1026 	struct ti_softc		*sc;
1027 {
1028 	int		i;
1029 
1030 	for (i = 0; i < TI_MINI_RX_RING_CNT; i++) {
1031 		if (sc->ti_cdata.ti_rx_mini_chain[i] != NULL) {
1032 			m_freem(sc->ti_cdata.ti_rx_mini_chain[i]);
1033 			sc->ti_cdata.ti_rx_mini_chain[i] = NULL;
1034 
1035 			/* if (sc->mini_dmamap[i] == 0) panic() */
1036 			bus_dmamap_destroy(sc->sc_dmat, sc->mini_dmamap[i]);
1037 			sc->mini_dmamap[i] = 0;
1038 		}
1039 		memset((char *)&sc->ti_rdata->ti_rx_mini_ring[i], 0,
1040 		    sizeof(struct ti_rx_desc));
1041 	}
1042 
1043 	return;
1044 }
1045 
1046 static void ti_free_tx_ring(sc)
1047 	struct ti_softc		*sc;
1048 {
1049 	int		i;
1050 	struct txdmamap_pool_entry *dma;
1051 
1052 	if (sc->ti_rdata->ti_tx_ring == NULL)
1053 		return;
1054 
1055 	for (i = 0; i < TI_TX_RING_CNT; i++) {
1056 		if (sc->ti_cdata.ti_tx_chain[i] != NULL) {
1057 			m_freem(sc->ti_cdata.ti_tx_chain[i]);
1058 			sc->ti_cdata.ti_tx_chain[i] = NULL;
1059 
1060 			/* if (sc->txdma[i] == 0) panic() */
1061 			SIMPLEQ_INSERT_HEAD(&sc->txdma_list, sc->txdma[i],
1062 					    link);
1063 			sc->txdma[i] = 0;
1064 		}
1065 		memset((char *)&sc->ti_rdata->ti_tx_ring[i], 0,
1066 		    sizeof(struct ti_tx_desc));
1067 	}
1068 
1069 	while ((dma = SIMPLEQ_FIRST(&sc->txdma_list))) {
1070 		SIMPLEQ_REMOVE_HEAD(&sc->txdma_list, dma, link);
1071 		bus_dmamap_destroy(sc->sc_dmat, dma->dmamap);
1072 		free(dma, M_DEVBUF);
1073 	}
1074 
1075 	return;
1076 }
1077 
1078 static int ti_init_tx_ring(sc)
1079 	struct ti_softc		*sc;
1080 {
1081 	int i, error;
1082 	bus_dmamap_t dmamap;
1083 	struct txdmamap_pool_entry *dma;
1084 
1085 	sc->ti_txcnt = 0;
1086 	sc->ti_tx_saved_considx = 0;
1087 	CSR_WRITE_4(sc, TI_MB_SENDPROD_IDX, 0);
1088 
1089 	SIMPLEQ_INIT(&sc->txdma_list);
1090 	for (i = 0; i < TI_RSLOTS; i++) {
1091 		/* I've seen mbufs with 30 fragments. */
1092 		if ((error = bus_dmamap_create(sc->sc_dmat, ETHER_MAX_LEN_JUMBO,
1093 					       40, ETHER_MAX_LEN_JUMBO, 0,
1094 					       BUS_DMA_NOWAIT, &dmamap)) != 0) {
1095 			printf("%s: can't create tx map, error = %d\n",
1096 			       sc->sc_dev.dv_xname, error);
1097 			return(ENOMEM);
1098 		}
1099 		dma = malloc(sizeof(*dma), M_DEVBUF, M_NOWAIT);
1100 		if (!dma) {
1101 			printf("%s: can't alloc txdmamap_pool_entry\n",
1102 			       sc->sc_dev.dv_xname);
1103 			bus_dmamap_destroy(sc->sc_dmat, dmamap);
1104 			return (ENOMEM);
1105 		}
1106 		dma->dmamap = dmamap;
1107 		SIMPLEQ_INSERT_HEAD(&sc->txdma_list, dma, link);
1108 	}
1109 
1110 	return(0);
1111 }
1112 
1113 /*
1114  * The Tigon 2 firmware has a new way to add/delete multicast addresses,
1115  * but we have to support the old way too so that Tigon 1 cards will
1116  * work.
1117  */
1118 void ti_add_mcast(sc, addr)
1119 	struct ti_softc		*sc;
1120 	struct ether_addr	*addr;
1121 {
1122 	struct ti_cmd_desc	cmd;
1123 	u_int16_t		*m;
1124 	u_int32_t		ext[2] = {0, 0};
1125 
1126 	m = (u_int16_t *)&addr->ether_addr_octet[0]; /* XXX */
1127 
1128 	switch(sc->ti_hwrev) {
1129 	case TI_HWREV_TIGON:
1130 		CSR_WRITE_4(sc, TI_GCR_MAR0, htons(m[0]));
1131 		CSR_WRITE_4(sc, TI_GCR_MAR1, (htons(m[1]) << 16) | htons(m[2]));
1132 		TI_DO_CMD(TI_CMD_ADD_MCAST_ADDR, 0, 0);
1133 		break;
1134 	case TI_HWREV_TIGON_II:
1135 		ext[0] = htons(m[0]);
1136 		ext[1] = (htons(m[1]) << 16) | htons(m[2]);
1137 		TI_DO_CMD_EXT(TI_CMD_EXT_ADD_MCAST, 0, 0, (caddr_t)&ext, 2);
1138 		break;
1139 	default:
1140 		printf("%s: unknown hwrev\n", sc->sc_dev.dv_xname);
1141 		break;
1142 	}
1143 
1144 	return;
1145 }
1146 
1147 void ti_del_mcast(sc, addr)
1148 	struct ti_softc		*sc;
1149 	struct ether_addr	*addr;
1150 {
1151 	struct ti_cmd_desc	cmd;
1152 	u_int16_t		*m;
1153 	u_int32_t		ext[2] = {0, 0};
1154 
1155 	m = (u_int16_t *)&addr->ether_addr_octet[0]; /* XXX */
1156 
1157 	switch(sc->ti_hwrev) {
1158 	case TI_HWREV_TIGON:
1159 		CSR_WRITE_4(sc, TI_GCR_MAR0, htons(m[0]));
1160 		CSR_WRITE_4(sc, TI_GCR_MAR1, (htons(m[1]) << 16) | htons(m[2]));
1161 		TI_DO_CMD(TI_CMD_DEL_MCAST_ADDR, 0, 0);
1162 		break;
1163 	case TI_HWREV_TIGON_II:
1164 		ext[0] = htons(m[0]);
1165 		ext[1] = (htons(m[1]) << 16) | htons(m[2]);
1166 		TI_DO_CMD_EXT(TI_CMD_EXT_DEL_MCAST, 0, 0, (caddr_t)&ext, 2);
1167 		break;
1168 	default:
1169 		printf("%s: unknown hwrev\n", sc->sc_dev.dv_xname);
1170 		break;
1171 	}
1172 
1173 	return;
1174 }
1175 
1176 /*
1177  * Configure the Tigon's multicast address filter.
1178  *
1179  * The actual multicast table management is a bit of a pain, thanks to
1180  * slight brain damage on the part of both Alteon and us. With our
1181  * multicast code, we are only alerted when the multicast address table
1182  * changes and at that point we only have the current list of addresses:
1183  * we only know the current state, not the previous state, so we don't
1184  * actually know what addresses were removed or added. The firmware has
1185  * state, but we can't get our grubby mits on it, and there is no 'delete
1186  * all multicast addresses' command. Hence, we have to maintain our own
1187  * state so we know what addresses have been programmed into the NIC at
1188  * any given time.
1189  */
1190 static void ti_setmulti(sc)
1191 	struct ti_softc		*sc;
1192 {
1193 	struct ifnet		*ifp;
1194 	struct ti_cmd_desc	cmd;
1195 	struct ti_mc_entry	*mc;
1196 	u_int32_t		intrs;
1197 	struct ether_multi *enm;
1198 	struct ether_multistep step;
1199 
1200 	ifp = &sc->ethercom.ec_if;
1201 
1202 	/* Disable interrupts. */
1203 	intrs = CSR_READ_4(sc, TI_MB_HOSTINTR);
1204 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
1205 
1206 	/* First, zot all the existing filters. */
1207 	while ((mc = SIMPLEQ_FIRST(&sc->ti_mc_listhead)) != NULL) {
1208 		ti_del_mcast(sc, &mc->mc_addr);
1209 		SIMPLEQ_REMOVE_HEAD(&sc->ti_mc_listhead, mc, mc_entries);
1210 		free(mc, M_DEVBUF);
1211 	}
1212 
1213 	/*
1214 	 * Remember all multicast addresses so that we can delete them
1215 	 * later.  Punt if there is a range of addresses or memory shortage.
1216 	 */
1217 	ETHER_FIRST_MULTI(step, &sc->ethercom, enm);
1218 	while (enm != NULL) {
1219 		if (memcmp(enm->enm_addrlo, enm->enm_addrhi,
1220 		    ETHER_ADDR_LEN) != 0)
1221 			goto allmulti;
1222 		if ((mc = malloc(sizeof(struct ti_mc_entry), M_DEVBUF,
1223 		    M_NOWAIT)) == NULL)
1224 			goto allmulti;
1225 		memcpy(&mc->mc_addr, enm->enm_addrlo, ETHER_ADDR_LEN);
1226 		SIMPLEQ_INSERT_HEAD(&sc->ti_mc_listhead, mc, mc_entries);
1227 		ETHER_NEXT_MULTI(step, enm);
1228 	}
1229 
1230 	/* Accept only programmed multicast addresses */
1231 	ifp->if_flags &= ~IFF_ALLMULTI;
1232 	TI_DO_CMD(TI_CMD_SET_ALLMULTI, TI_CMD_CODE_ALLMULTI_DIS, 0);
1233 
1234 	/* Now program new ones. */
1235 	for (mc = SIMPLEQ_FIRST(&sc->ti_mc_listhead); mc != NULL;
1236 	    mc = SIMPLEQ_NEXT(mc, mc_entries))
1237 		ti_add_mcast(sc, &mc->mc_addr);
1238 
1239 	/* Re-enable interrupts. */
1240 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, intrs);
1241 
1242 	return;
1243 
1244 allmulti:
1245 	/* No need to keep individual multicast addresses */
1246 	while ((mc = SIMPLEQ_FIRST(&sc->ti_mc_listhead)) != NULL) {
1247 		SIMPLEQ_REMOVE_HEAD(&sc->ti_mc_listhead, mc,
1248 		    mc_entries);
1249 		free(mc, M_DEVBUF);
1250 	}
1251 
1252 	/* Accept all multicast addresses */
1253 	ifp->if_flags |= IFF_ALLMULTI;
1254 	TI_DO_CMD(TI_CMD_SET_ALLMULTI, TI_CMD_CODE_ALLMULTI_ENB, 0);
1255 
1256 	/* Re-enable interrupts. */
1257 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, intrs);
1258 }
1259 
1260 /*
1261  * Check to see if the BIOS has configured us for a 64 bit slot when
1262  * we aren't actually in one. If we detect this condition, we can work
1263  * around it on the Tigon 2 by setting a bit in the PCI state register,
1264  * but for the Tigon 1 we must give up and abort the interface attach.
1265  */
1266 static int ti_64bitslot_war(sc)
1267 	struct ti_softc		*sc;
1268 {
1269 	if (!(CSR_READ_4(sc, TI_PCI_STATE) & TI_PCISTATE_32BIT_BUS)) {
1270 		CSR_WRITE_4(sc, 0x600, 0);
1271 		CSR_WRITE_4(sc, 0x604, 0);
1272 		CSR_WRITE_4(sc, 0x600, 0x5555AAAA);
1273 		if (CSR_READ_4(sc, 0x604) == 0x5555AAAA) {
1274 			if (sc->ti_hwrev == TI_HWREV_TIGON)
1275 				return(EINVAL);
1276 			else {
1277 				TI_SETBIT(sc, TI_PCI_STATE,
1278 				    TI_PCISTATE_32BIT_BUS);
1279 				return(0);
1280 			}
1281 		}
1282 	}
1283 
1284 	return(0);
1285 }
1286 
1287 /*
1288  * Do endian, PCI and DMA initialization. Also check the on-board ROM
1289  * self-test results.
1290  */
1291 static int ti_chipinit(sc)
1292 	struct ti_softc		*sc;
1293 {
1294 	u_int32_t		cacheline;
1295 	u_int32_t		pci_writemax = 0;
1296 
1297 	/* Initialize link to down state. */
1298 	sc->ti_linkstat = TI_EV_CODE_LINK_DOWN;
1299 
1300 	/* Set endianness before we access any non-PCI registers. */
1301 #if BYTE_ORDER == BIG_ENDIAN
1302 	CSR_WRITE_4(sc, TI_MISC_HOST_CTL,
1303 	    TI_MHC_BIGENDIAN_INIT | (TI_MHC_BIGENDIAN_INIT << 24));
1304 #else
1305 	CSR_WRITE_4(sc, TI_MISC_HOST_CTL,
1306 	    TI_MHC_LITTLEENDIAN_INIT | (TI_MHC_LITTLEENDIAN_INIT << 24));
1307 #endif
1308 
1309 	/* Check the ROM failed bit to see if self-tests passed. */
1310 	if (CSR_READ_4(sc, TI_CPU_STATE) & TI_CPUSTATE_ROMFAIL) {
1311 		printf("%s: board self-diagnostics failed!\n",
1312 		       sc->sc_dev.dv_xname);
1313 		return(ENODEV);
1314 	}
1315 
1316 	/* Halt the CPU. */
1317 	TI_SETBIT(sc, TI_CPU_STATE, TI_CPUSTATE_HALT);
1318 
1319 	/* Figure out the hardware revision. */
1320 	switch(CSR_READ_4(sc, TI_MISC_HOST_CTL) & TI_MHC_CHIP_REV_MASK) {
1321 	case TI_REV_TIGON_I:
1322 		sc->ti_hwrev = TI_HWREV_TIGON;
1323 		break;
1324 	case TI_REV_TIGON_II:
1325 		sc->ti_hwrev = TI_HWREV_TIGON_II;
1326 		break;
1327 	default:
1328 		printf("%s: unsupported chip revision\n", sc->sc_dev.dv_xname);
1329 		return(ENODEV);
1330 	}
1331 
1332 	/* Do special setup for Tigon 2. */
1333 	if (sc->ti_hwrev == TI_HWREV_TIGON_II) {
1334 		TI_SETBIT(sc, TI_CPU_CTL_B, TI_CPUSTATE_HALT);
1335 		TI_SETBIT(sc, TI_MISC_LOCAL_CTL, TI_MLC_SRAM_BANK_256K);
1336 		TI_SETBIT(sc, TI_MISC_CONF, TI_MCR_SRAM_SYNCHRONOUS);
1337 	}
1338 
1339 	/* Set up the PCI state register. */
1340 	CSR_WRITE_4(sc, TI_PCI_STATE, TI_PCI_READ_CMD|TI_PCI_WRITE_CMD);
1341 	if (sc->ti_hwrev == TI_HWREV_TIGON_II) {
1342 		TI_SETBIT(sc, TI_PCI_STATE, TI_PCISTATE_USE_MEM_RD_MULT);
1343 	}
1344 
1345 	/* Clear the read/write max DMA parameters. */
1346 	TI_CLRBIT(sc, TI_PCI_STATE, (TI_PCISTATE_WRITE_MAXDMA|
1347 	    TI_PCISTATE_READ_MAXDMA));
1348 
1349 	/* Get cache line size. */
1350 	cacheline = PCI_CACHELINE(CSR_READ_4(sc, PCI_BHLC_REG));
1351 
1352 	/*
1353 	 * If the system has set enabled the PCI memory write
1354 	 * and invalidate command in the command register, set
1355 	 * the write max parameter accordingly. This is necessary
1356 	 * to use MWI with the Tigon 2.
1357 	 */
1358 	if (CSR_READ_4(sc, PCI_COMMAND_STATUS_REG)
1359 	    & PCI_COMMAND_INVALIDATE_ENABLE) {
1360 		switch(cacheline) {
1361 		case 1:
1362 		case 4:
1363 		case 8:
1364 		case 16:
1365 		case 32:
1366 		case 64:
1367 			break;
1368 		default:
1369 		/* Disable PCI memory write and invalidate. */
1370 			if (bootverbose)
1371 				printf("%s: cache line size %d not "
1372 				    "supported; disabling PCI MWI\n",
1373 				    sc->sc_dev.dv_xname, cacheline);
1374 			CSR_WRITE_4(sc, PCI_COMMAND_STATUS_REG,
1375 				    CSR_READ_4(sc, PCI_COMMAND_STATUS_REG)
1376 				    & ~PCI_COMMAND_INVALIDATE_ENABLE);
1377 			break;
1378 		}
1379 	}
1380 
1381 #ifdef __brokenalpha__
1382 	/*
1383 	 * From the Alteon sample driver:
1384 	 * Must insure that we do not cross an 8K (bytes) boundary
1385 	 * for DMA reads.  Our highest limit is 1K bytes.  This is a
1386 	 * restriction on some ALPHA platforms with early revision
1387 	 * 21174 PCI chipsets, such as the AlphaPC 164lx
1388 	 */
1389 	TI_SETBIT(sc, TI_PCI_STATE, pci_writemax|TI_PCI_READMAX_1024);
1390 #else
1391 	TI_SETBIT(sc, TI_PCI_STATE, pci_writemax);
1392 #endif
1393 
1394 	/* This sets the min dma param all the way up (0xff). */
1395 	TI_SETBIT(sc, TI_PCI_STATE, TI_PCISTATE_MINDMA);
1396 
1397 	/* Configure DMA variables. */
1398 #if BYTE_ORDER == BIG_ENDIAN
1399 	CSR_WRITE_4(sc, TI_GCR_OPMODE, TI_OPMODE_BYTESWAP_BD |
1400 	    TI_OPMODE_BYTESWAP_DATA | TI_OPMODE_WORDSWAP_BD |
1401 	    TI_OPMODE_WARN_ENB | TI_OPMODE_FATAL_ENB |
1402 	    TI_OPMODE_DONT_FRAG_JUMBO);
1403 #else
1404 	CSR_WRITE_4(sc, TI_GCR_OPMODE, TI_OPMODE_BYTESWAP_DATA|
1405 	    TI_OPMODE_WORDSWAP_BD|TI_OPMODE_DONT_FRAG_JUMBO|
1406 	    TI_OPMODE_WARN_ENB|TI_OPMODE_FATAL_ENB);
1407 #endif
1408 
1409 	/*
1410 	 * Only allow 1 DMA channel to be active at a time.
1411 	 * I don't think this is a good idea, but without it
1412 	 * the firmware racks up lots of nicDmaReadRingFull
1413 	 * errors.
1414 	 * Incompatible with hardware assisted checksums.
1415 	 */
1416 	if ((sc->ethercom.ec_if.if_capenable &
1417 	    (IFCAP_CSUM_TCPv4|IFCAP_CSUM_UDPv4|IFCAP_CSUM_IPv4)) == 0)
1418 		TI_SETBIT(sc, TI_GCR_OPMODE, TI_OPMODE_1_DMA_ACTIVE);
1419 
1420 	/* Recommended settings from Tigon manual. */
1421 	CSR_WRITE_4(sc, TI_GCR_DMA_WRITECFG, TI_DMA_STATE_THRESH_8W);
1422 	CSR_WRITE_4(sc, TI_GCR_DMA_READCFG, TI_DMA_STATE_THRESH_8W);
1423 
1424 	if (ti_64bitslot_war(sc)) {
1425 		printf("%s: bios thinks we're in a 64 bit slot, "
1426 		    "but we aren't", sc->sc_dev.dv_xname);
1427 		return(EINVAL);
1428 	}
1429 
1430 	return(0);
1431 }
1432 
1433 /*
1434  * Initialize the general information block and firmware, and
1435  * start the CPU(s) running.
1436  */
1437 static int ti_gibinit(sc)
1438 	struct ti_softc		*sc;
1439 {
1440 	struct ti_rcb		*rcb;
1441 	int			i;
1442 	struct ifnet		*ifp;
1443 
1444 	ifp = &sc->ethercom.ec_if;
1445 
1446 	/* Disable interrupts for now. */
1447 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
1448 
1449 	/* Tell the chip where to find the general information block. */
1450 	CSR_WRITE_4(sc, TI_GCR_GENINFO_HI, 0);
1451 	CSR_WRITE_4(sc, TI_GCR_GENINFO_LO, TI_CDGIBADDR(sc));
1452 
1453 	/* Load the firmware into SRAM. */
1454 	ti_loadfw(sc);
1455 
1456 	/* Set up the contents of the general info and ring control blocks. */
1457 
1458 	/* Set up the event ring and producer pointer. */
1459 	rcb = &sc->ti_rdata->ti_info.ti_ev_rcb;
1460 
1461 	TI_HOSTADDR(rcb->ti_hostaddr) = TI_CDEVENTADDR(sc, 0);
1462 	rcb->ti_flags = 0;
1463 	TI_HOSTADDR(sc->ti_rdata->ti_info.ti_ev_prodidx_ptr) =
1464 	    TI_CDEVPRODADDR(sc);
1465 
1466 	sc->ti_ev_prodidx.ti_idx = 0;
1467 	CSR_WRITE_4(sc, TI_GCR_EVENTCONS_IDX, 0);
1468 	sc->ti_ev_saved_considx = 0;
1469 
1470 	/* Set up the command ring and producer mailbox. */
1471 	rcb = &sc->ti_rdata->ti_info.ti_cmd_rcb;
1472 
1473 	TI_HOSTADDR(rcb->ti_hostaddr) = TI_GCR_NIC_ADDR(TI_GCR_CMDRING);
1474 	rcb->ti_flags = 0;
1475 	rcb->ti_max_len = 0;
1476 	for (i = 0; i < TI_CMD_RING_CNT; i++) {
1477 		CSR_WRITE_4(sc, TI_GCR_CMDRING + (i * 4), 0);
1478 	}
1479 	CSR_WRITE_4(sc, TI_GCR_CMDCONS_IDX, 0);
1480 	CSR_WRITE_4(sc, TI_MB_CMDPROD_IDX, 0);
1481 	sc->ti_cmd_saved_prodidx = 0;
1482 
1483 	/*
1484 	 * Assign the address of the stats refresh buffer.
1485 	 * We re-use the current stats buffer for this to
1486 	 * conserve memory.
1487 	 */
1488 	TI_HOSTADDR(sc->ti_rdata->ti_info.ti_refresh_stats_ptr) =
1489 	    TI_CDSTATSADDR(sc);
1490 
1491 	/* Set up the standard receive ring. */
1492 	rcb = &sc->ti_rdata->ti_info.ti_std_rx_rcb;
1493 	TI_HOSTADDR(rcb->ti_hostaddr) = TI_CDRXSTDADDR(sc, 0);
1494 	rcb->ti_max_len = ETHER_MAX_LEN;
1495 	rcb->ti_flags = 0;
1496 	if (ifp->if_capenable & IFCAP_CSUM_IPv4)
1497 		rcb->ti_flags |= TI_RCB_FLAG_IP_CKSUM;
1498 	if (ifp->if_capenable & (IFCAP_CSUM_TCPv4|IFCAP_CSUM_UDPv4))
1499 		rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM;
1500 	if (sc->ethercom.ec_nvlans != 0)
1501 		rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
1502 
1503 	/* Set up the jumbo receive ring. */
1504 	rcb = &sc->ti_rdata->ti_info.ti_jumbo_rx_rcb;
1505 	TI_HOSTADDR(rcb->ti_hostaddr) = TI_CDRXJUMBOADDR(sc, 0);
1506 	rcb->ti_max_len = ETHER_MAX_LEN_JUMBO;
1507 	rcb->ti_flags = 0;
1508 	if (ifp->if_capenable & IFCAP_CSUM_IPv4)
1509 		rcb->ti_flags |= TI_RCB_FLAG_IP_CKSUM;
1510 	if (ifp->if_capenable & (IFCAP_CSUM_TCPv4|IFCAP_CSUM_UDPv4))
1511 		rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM;
1512 	if (sc->ethercom.ec_nvlans != 0)
1513 		rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
1514 
1515 	/*
1516 	 * Set up the mini ring. Only activated on the
1517 	 * Tigon 2 but the slot in the config block is
1518 	 * still there on the Tigon 1.
1519 	 */
1520 	rcb = &sc->ti_rdata->ti_info.ti_mini_rx_rcb;
1521 	TI_HOSTADDR(rcb->ti_hostaddr) = TI_CDRXMINIADDR(sc, 0);
1522 	rcb->ti_max_len = MHLEN - ETHER_ALIGN;
1523 	if (sc->ti_hwrev == TI_HWREV_TIGON)
1524 		rcb->ti_flags = TI_RCB_FLAG_RING_DISABLED;
1525 	else
1526 		rcb->ti_flags = 0;
1527 	if (ifp->if_capenable & IFCAP_CSUM_IPv4)
1528 		rcb->ti_flags |= TI_RCB_FLAG_IP_CKSUM;
1529 	if (ifp->if_capenable & (IFCAP_CSUM_TCPv4|IFCAP_CSUM_UDPv4))
1530 		rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM;
1531 	if (sc->ethercom.ec_nvlans != 0)
1532 		rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
1533 
1534 	/*
1535 	 * Set up the receive return ring.
1536 	 */
1537 	rcb = &sc->ti_rdata->ti_info.ti_return_rcb;
1538 	TI_HOSTADDR(rcb->ti_hostaddr) = TI_CDRXRTNADDR(sc, 0);
1539 	rcb->ti_flags = 0;
1540 	rcb->ti_max_len = TI_RETURN_RING_CNT;
1541 	TI_HOSTADDR(sc->ti_rdata->ti_info.ti_return_prodidx_ptr) =
1542 	    TI_CDRTNPRODADDR(sc);
1543 
1544 	/*
1545 	 * Set up the tx ring. Note: for the Tigon 2, we have the option
1546 	 * of putting the transmit ring in the host's address space and
1547 	 * letting the chip DMA it instead of leaving the ring in the NIC's
1548 	 * memory and accessing it through the shared memory region. We
1549 	 * do this for the Tigon 2, but it doesn't work on the Tigon 1,
1550 	 * so we have to revert to the shared memory scheme if we detect
1551 	 * a Tigon 1 chip.
1552 	 */
1553 	CSR_WRITE_4(sc, TI_WINBASE, TI_TX_RING_BASE);
1554 	if (sc->ti_hwrev == TI_HWREV_TIGON) {
1555 		sc->ti_tx_ring_nic =
1556 		    (struct ti_tx_desc *)(sc->ti_vhandle + TI_WINDOW);
1557 	}
1558 	memset((char *)sc->ti_rdata->ti_tx_ring, 0,
1559 	    TI_TX_RING_CNT * sizeof(struct ti_tx_desc));
1560 	rcb = &sc->ti_rdata->ti_info.ti_tx_rcb;
1561 	if (sc->ti_hwrev == TI_HWREV_TIGON)
1562 		rcb->ti_flags = 0;
1563 	else
1564 		rcb->ti_flags = TI_RCB_FLAG_HOST_RING;
1565 	if (ifp->if_capenable & IFCAP_CSUM_IPv4)
1566 		rcb->ti_flags |= TI_RCB_FLAG_IP_CKSUM;
1567 	/*
1568 	 * When we get the packet, there is a pseudo-header seed already
1569 	 * in the th_sum or uh_sum field.  Make sure the firmware doesn't
1570 	 * compute the pseudo-header checksum again!
1571 	 */
1572 	if (ifp->if_capenable & (IFCAP_CSUM_TCPv4|IFCAP_CSUM_UDPv4))
1573 		rcb->ti_flags |= TI_RCB_FLAG_TCP_UDP_CKSUM|
1574 		    TI_RCB_FLAG_NO_PHDR_CKSUM;
1575 	if (sc->ethercom.ec_nvlans != 0)
1576 		rcb->ti_flags |= TI_RCB_FLAG_VLAN_ASSIST;
1577 	rcb->ti_max_len = TI_TX_RING_CNT;
1578 	if (sc->ti_hwrev == TI_HWREV_TIGON)
1579 		TI_HOSTADDR(rcb->ti_hostaddr) = TI_TX_RING_BASE;
1580 	else
1581 		TI_HOSTADDR(rcb->ti_hostaddr) = TI_CDTXADDR(sc, 0);
1582 	TI_HOSTADDR(sc->ti_rdata->ti_info.ti_tx_considx_ptr) =
1583 	    TI_CDTXCONSADDR(sc);
1584 
1585 	/*
1586 	 * We're done frobbing the General Information Block.  Sync
1587 	 * it.  Note we take care of the first stats sync here, as
1588 	 * well.
1589 	 */
1590 	TI_CDGIBSYNC(sc, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
1591 
1592 	/* Set up tuneables */
1593 	if (ifp->if_mtu > (ETHERMTU + ETHER_HDR_LEN + ETHER_CRC_LEN) ||
1594 	    (sc->ethercom.ec_capenable & ETHERCAP_VLAN_MTU))
1595 		CSR_WRITE_4(sc, TI_GCR_RX_COAL_TICKS,
1596 		    (sc->ti_rx_coal_ticks / 10));
1597 	else
1598 		CSR_WRITE_4(sc, TI_GCR_RX_COAL_TICKS, sc->ti_rx_coal_ticks);
1599 	CSR_WRITE_4(sc, TI_GCR_TX_COAL_TICKS, sc->ti_tx_coal_ticks);
1600 	CSR_WRITE_4(sc, TI_GCR_STAT_TICKS, sc->ti_stat_ticks);
1601 	CSR_WRITE_4(sc, TI_GCR_RX_MAX_COAL_BD, sc->ti_rx_max_coal_bds);
1602 	CSR_WRITE_4(sc, TI_GCR_TX_MAX_COAL_BD, sc->ti_tx_max_coal_bds);
1603 	CSR_WRITE_4(sc, TI_GCR_TX_BUFFER_RATIO, sc->ti_tx_buf_ratio);
1604 
1605 	/* Turn interrupts on. */
1606 	CSR_WRITE_4(sc, TI_GCR_MASK_INTRS, 0);
1607 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0);
1608 
1609 	/* Start CPU. */
1610 	TI_CLRBIT(sc, TI_CPU_STATE, (TI_CPUSTATE_HALT|TI_CPUSTATE_STEP));
1611 
1612 	return(0);
1613 }
1614 
1615 /*
1616  * look for id in the device list, returning the first match
1617  */
1618 static const struct ti_type *
1619 ti_type_match(pa)
1620 	struct pci_attach_args *pa;
1621 {
1622 	const struct ti_type          *t;
1623 
1624 	t = ti_devs;
1625 	while(t->ti_name != NULL) {
1626 		if ((PCI_VENDOR(pa->pa_id) == t->ti_vid) &&
1627 		    (PCI_PRODUCT(pa->pa_id) == t->ti_did)) {
1628 			return (t);
1629 		}
1630 		t++;
1631 	}
1632 
1633 	return(NULL);
1634 }
1635 
1636 /*
1637  * Probe for a Tigon chip. Check the PCI vendor and device IDs
1638  * against our list and return its name if we find a match.
1639  */
1640 static int ti_probe(parent, match, aux)
1641 	struct device *parent;
1642 	struct cfdata *match;
1643 	void *aux;
1644 {
1645 	struct pci_attach_args *pa = aux;
1646 	const struct ti_type		*t;
1647 
1648 	t = ti_type_match(pa);
1649 
1650 	return((t == NULL) ? 0 : 1);
1651 }
1652 
1653 static void ti_attach(parent, self, aux)
1654 	struct device *parent, *self;
1655 	void *aux;
1656 {
1657 	u_int32_t		command;
1658 	struct ifnet		*ifp;
1659 	struct ti_softc		*sc;
1660 	u_char eaddr[ETHER_ADDR_LEN];
1661 	struct pci_attach_args *pa = aux;
1662 	pci_chipset_tag_t pc = pa->pa_pc;
1663 	pci_intr_handle_t ih;
1664 	const char *intrstr = NULL;
1665 	bus_dma_segment_t dmaseg;
1666 	int error, dmanseg, nolinear;
1667 	const struct ti_type		*t;
1668 
1669 	t = ti_type_match(pa);
1670 	if (t == NULL) {
1671 		printf("ti_attach: were did the card go ?\n");
1672 		return;
1673 	}
1674 
1675 	printf(": %s (rev. 0x%02x)\n", t->ti_name, PCI_REVISION(pa->pa_class));
1676 
1677 	sc = (struct ti_softc *)self;
1678 
1679 	/*
1680 	 * Map control/status registers.
1681 	 */
1682 	nolinear = 0;
1683 	if (pci_mapreg_map(pa, 0x10,
1684 	    PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT,
1685 	    BUS_SPACE_MAP_LINEAR , &sc->ti_btag, &sc->ti_bhandle,
1686 	    NULL, NULL)) {
1687 		nolinear = 1;
1688 		if (pci_mapreg_map(pa, 0x10,
1689 		    PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT,
1690 		    0 , &sc->ti_btag, &sc->ti_bhandle, NULL, NULL)) {
1691 			printf(": can't map memory space\n");
1692 			return;
1693 		}
1694 	}
1695 	if (nolinear == 0)
1696 		sc->ti_vhandle = (void *)(u_long)(sc->ti_bhandle); /* XXX XXX XXX */
1697 	else
1698 		sc->ti_vhandle = NULL;
1699 
1700 	command = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
1701 	command |= PCI_COMMAND_MASTER_ENABLE;
1702 	pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, command);
1703 
1704 	/* Allocate interrupt */
1705 	if (pci_intr_map(pa, &ih)) {
1706 		printf("%s: couldn't map interrupt\n", sc->sc_dev.dv_xname);
1707 		return;;
1708 	}
1709 	intrstr = pci_intr_string(pc, ih);
1710 	sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, ti_intr, sc);
1711 	if (sc->sc_ih == NULL) {
1712 		printf("%s: couldn't establish interrupt",
1713 		    sc->sc_dev.dv_xname);
1714 		if (intrstr != NULL)
1715 			printf(" at %s", intrstr);
1716 		printf("\n");
1717 		return;;
1718 	}
1719 	printf("%s: interrupting at %s\n", sc->sc_dev.dv_xname, intrstr);
1720 	/*
1721 	 * Add shutdown hook so that DMA is disabled prior to reboot. Not
1722 	 * doing do could allow DMA to corrupt kernel memory during the
1723 	 * reboot before the driver initializes.
1724 	 */
1725 	(void) shutdownhook_establish(ti_shutdown, sc);
1726 
1727 	if (ti_chipinit(sc)) {
1728 		printf("%s: chip initialization failed\n", self->dv_xname);
1729 		goto fail2;
1730 	}
1731 
1732 	/*
1733 	 * Deal with some chip diffrences.
1734 	 */
1735 	switch (sc->ti_hwrev) {
1736 	case TI_HWREV_TIGON:
1737 		sc->sc_tx_encap = ti_encap_tigon1;
1738 		sc->sc_tx_eof = ti_txeof_tigon1;
1739 		if (nolinear == 1)
1740 			printf("%s: memory space not mapped linear\n",
1741 			    self->dv_xname);
1742 		break;
1743 
1744 	case TI_HWREV_TIGON_II:
1745 		sc->sc_tx_encap = ti_encap_tigon2;
1746 		sc->sc_tx_eof = ti_txeof_tigon2;
1747 		break;
1748 
1749 	default:
1750 		printf("%s: Unknown chip version: %d\n", self->dv_xname,
1751 		    sc->ti_hwrev);
1752 		goto fail2;
1753 	}
1754 
1755 	/* Zero out the NIC's on-board SRAM. */
1756 	ti_mem(sc, 0x2000, 0x100000 - 0x2000,  NULL);
1757 
1758 	/* Init again -- zeroing memory may have clobbered some registers. */
1759 	if (ti_chipinit(sc)) {
1760 		printf("%s: chip initialization failed\n", self->dv_xname);
1761 		goto fail2;
1762 	}
1763 
1764 	/*
1765 	 * Get station address from the EEPROM. Note: the manual states
1766 	 * that the MAC address is at offset 0x8c, however the data is
1767 	 * stored as two longwords (since that's how it's loaded into
1768 	 * the NIC). This means the MAC address is actually preceded
1769 	 * by two zero bytes. We need to skip over those.
1770 	 */
1771 	if (ti_read_eeprom(sc, (caddr_t)&eaddr,
1772 				TI_EE_MAC_OFFSET + 2, ETHER_ADDR_LEN)) {
1773 		printf("%s: failed to read station address\n", self->dv_xname);
1774 		goto fail2;
1775 	}
1776 
1777 	/*
1778 	 * A Tigon chip was detected. Inform the world.
1779 	 */
1780 	printf("%s: Ethernet address: %s\n", self->dv_xname,
1781 				ether_sprintf(eaddr));
1782 
1783 	sc->sc_dmat = pa->pa_dmat;
1784 
1785 	/* Allocate the general information block and ring buffers. */
1786 	if ((error = bus_dmamem_alloc(sc->sc_dmat,
1787 	    sizeof(struct ti_ring_data), PAGE_SIZE, 0, &dmaseg, 1, &dmanseg,
1788 	    BUS_DMA_NOWAIT)) != 0) {
1789 		printf("%s: can't allocate ring buffer, error = %d\n",
1790 		       sc->sc_dev.dv_xname, error);
1791 		goto fail2;
1792 	}
1793 
1794 	if ((error = bus_dmamem_map(sc->sc_dmat, &dmaseg, dmanseg,
1795 	    sizeof(struct ti_ring_data), (caddr_t *)&sc->ti_rdata,
1796 	    BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
1797 		printf("%s: can't map ring buffer, error = %d\n",
1798 		       sc->sc_dev.dv_xname, error);
1799 		goto fail2;
1800 	}
1801 
1802 	if ((error = bus_dmamap_create(sc->sc_dmat,
1803 	    sizeof(struct ti_ring_data), 1,
1804 	    sizeof(struct ti_ring_data), 0, BUS_DMA_NOWAIT,
1805 	    &sc->info_dmamap)) != 0) {
1806 		printf("%s: can't create ring buffer DMA map, error = %d\n",
1807 		       sc->sc_dev.dv_xname, error);
1808 		goto fail2;
1809 	}
1810 
1811 	if ((error = bus_dmamap_load(sc->sc_dmat, sc->info_dmamap,
1812 	    sc->ti_rdata, sizeof(struct ti_ring_data), NULL,
1813 	    BUS_DMA_NOWAIT)) != 0) {
1814 		printf("%s: can't load ring buffer DMA map, error = %d\n",
1815 		       sc->sc_dev.dv_xname, error);
1816 		goto fail2;
1817 	}
1818 
1819 	sc->info_dmaaddr = sc->info_dmamap->dm_segs[0].ds_addr;
1820 
1821 	memset(sc->ti_rdata, 0, sizeof(struct ti_ring_data));
1822 
1823 	/* Try to allocate memory for jumbo buffers. */
1824 	if (ti_alloc_jumbo_mem(sc)) {
1825 		printf("%s: jumbo buffer allocation failed\n", self->dv_xname);
1826 		goto fail2;
1827 	}
1828 
1829 	SIMPLEQ_INIT(&sc->ti_mc_listhead);
1830 
1831 	/*
1832 	 * We really need a better way to tell a 1000baseT card
1833 	 * from a 1000baseSX one, since in theory there could be
1834 	 * OEMed 1000baseT cards from lame vendors who aren't
1835 	 * clever enough to change the PCI ID. For the moment
1836 	 * though, the AceNIC is the only copper card available.
1837 	 */
1838 	if ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_ALTEON &&
1839 	    PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_ALTEON_ACENIC_COPPER) ||
1840 	    (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_NETGEAR &&
1841 	    PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_NETGEAR_GA620T))
1842 		sc->ti_copper = 1;
1843 	else
1844 		sc->ti_copper = 0;
1845 
1846 	/* Set default tuneable values. */
1847 	sc->ti_stat_ticks = 2 * TI_TICKS_PER_SEC;
1848 	sc->ti_rx_coal_ticks = TI_TICKS_PER_SEC / 5000;
1849 	sc->ti_tx_coal_ticks = TI_TICKS_PER_SEC / 500;
1850 	sc->ti_rx_max_coal_bds = 64;
1851 	sc->ti_tx_max_coal_bds = 128;
1852 	sc->ti_tx_buf_ratio = 21;
1853 
1854 	/* Set up ifnet structure */
1855 	ifp = &sc->ethercom.ec_if;
1856 	ifp->if_softc = sc;
1857 	strcpy(ifp->if_xname, sc->sc_dev.dv_xname);
1858 	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
1859 	ifp->if_ioctl = ti_ioctl;
1860 	ifp->if_start = ti_start;
1861 	ifp->if_watchdog = ti_watchdog;
1862 	IFQ_SET_READY(&ifp->if_snd);
1863 
1864 #if 0
1865 	/*
1866 	 * XXX This is not really correct -- we don't necessarily
1867 	 * XXX want to queue up as many as we can transmit at the
1868 	 * XXX upper layer like that.  Someone with a board should
1869 	 * XXX check to see how this affects performance.
1870 	 */
1871 	ifp->if_snd.ifq_maxlen = TI_TX_RING_CNT - 1;
1872 #endif
1873 
1874 	/*
1875 	 * We can support 802.1Q VLAN-sized frames.
1876 	 */
1877 	sc->ethercom.ec_capabilities |=
1878 	    ETHERCAP_VLAN_MTU | ETHERCAP_VLAN_HWTAGGING;
1879 
1880 	/*
1881 	 * We can do IPv4, TCPv4, and UDPv4 checksums in hardware.
1882 	 */
1883 	ifp->if_capabilities |= IFCAP_CSUM_IPv4 | IFCAP_CSUM_TCPv4 |
1884 	    IFCAP_CSUM_UDPv4;
1885 
1886 	/* Set up ifmedia support. */
1887 	ifmedia_init(&sc->ifmedia, IFM_IMASK, ti_ifmedia_upd, ti_ifmedia_sts);
1888 	if (sc->ti_copper) {
1889                 /*
1890                  * Copper cards allow manual 10/100 mode selection,
1891                  * but not manual 1000baseT mode selection. Why?
1892                  * Becuase currently there's no way to specify the
1893                  * master/slave setting through the firmware interface,
1894                  * so Alteon decided to just bag it and handle it
1895                  * via autonegotiation.
1896                  */
1897                 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL);
1898                 ifmedia_add(&sc->ifmedia,
1899                     IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
1900                 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX, 0, NULL);
1901                 ifmedia_add(&sc->ifmedia,
1902                     IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL);
1903                 ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_1000_T, 0, NULL);
1904                 ifmedia_add(&sc->ifmedia,
1905                     IFM_ETHER|IFM_1000_T|IFM_FDX, 0, NULL);
1906 	} else {
1907 		/* Fiber cards don't support 10/100 modes. */
1908 		ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_1000_SX, 0, NULL);
1909 		ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_1000_SX|IFM_FDX, 0, NULL);
1910 	}
1911 	ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL);
1912 	ifmedia_set(&sc->ifmedia, IFM_ETHER|IFM_AUTO);
1913 
1914 	/*
1915 	 * Call MI attach routines.
1916 	 */
1917 	if_attach(ifp);
1918 	ether_ifattach(ifp, eaddr);
1919 
1920 	return;
1921 fail2:
1922 	pci_intr_disestablish(pc, sc->sc_ih);
1923 	return;
1924 }
1925 
1926 /*
1927  * Frame reception handling. This is called if there's a frame
1928  * on the receive return list.
1929  *
1930  * Note: we have to be able to handle three possibilities here:
1931  * 1) the frame is from the mini receive ring (can only happen)
1932  *    on Tigon 2 boards)
1933  * 2) the frame is from the jumbo receive ring
1934  * 3) the frame is from the standard receive ring
1935  */
1936 
1937 static void ti_rxeof(sc)
1938 	struct ti_softc		*sc;
1939 {
1940 	struct ifnet		*ifp;
1941 	struct ti_cmd_desc	cmd;
1942 
1943 	ifp = &sc->ethercom.ec_if;
1944 
1945 	while(sc->ti_rx_saved_considx != sc->ti_return_prodidx.ti_idx) {
1946 		struct ti_rx_desc	*cur_rx;
1947 		u_int32_t		rxidx;
1948 		struct mbuf		*m = NULL;
1949 		u_int16_t		vlan_tag = 0;
1950 		int			have_tag = 0;
1951 		struct ether_header	*eh;
1952 		bus_dmamap_t dmamap;
1953 
1954 		cur_rx =
1955 		    &sc->ti_rdata->ti_rx_return_ring[sc->ti_rx_saved_considx];
1956 		rxidx = cur_rx->ti_idx;
1957 		TI_INC(sc->ti_rx_saved_considx, TI_RETURN_RING_CNT);
1958 
1959 		if (cur_rx->ti_flags & TI_BDFLAG_VLAN_TAG) {
1960 			have_tag = 1;
1961 			vlan_tag = cur_rx->ti_vlan_tag;
1962 		}
1963 
1964 		if (cur_rx->ti_flags & TI_BDFLAG_JUMBO_RING) {
1965 			TI_INC(sc->ti_jumbo, TI_JUMBO_RX_RING_CNT);
1966 			m = sc->ti_cdata.ti_rx_jumbo_chain[rxidx];
1967 			sc->ti_cdata.ti_rx_jumbo_chain[rxidx] = NULL;
1968 			if (cur_rx->ti_flags & TI_BDFLAG_ERROR) {
1969 				ifp->if_ierrors++;
1970 				ti_newbuf_jumbo(sc, sc->ti_jumbo, m);
1971 				continue;
1972 			}
1973 			if (ti_newbuf_jumbo(sc, sc->ti_jumbo, NULL)
1974 			    == ENOBUFS) {
1975 				ifp->if_ierrors++;
1976 				ti_newbuf_jumbo(sc, sc->ti_jumbo, m);
1977 				continue;
1978 			}
1979 		} else if (cur_rx->ti_flags & TI_BDFLAG_MINI_RING) {
1980 			TI_INC(sc->ti_mini, TI_MINI_RX_RING_CNT);
1981 			m = sc->ti_cdata.ti_rx_mini_chain[rxidx];
1982 			sc->ti_cdata.ti_rx_mini_chain[rxidx] = NULL;
1983 			dmamap = sc->mini_dmamap[rxidx];
1984 			sc->mini_dmamap[rxidx] = 0;
1985 			if (cur_rx->ti_flags & TI_BDFLAG_ERROR) {
1986 				ifp->if_ierrors++;
1987 				ti_newbuf_mini(sc, sc->ti_mini, m, dmamap);
1988 				continue;
1989 			}
1990 			if (ti_newbuf_mini(sc, sc->ti_mini, NULL, dmamap)
1991 			    == ENOBUFS) {
1992 				ifp->if_ierrors++;
1993 				ti_newbuf_mini(sc, sc->ti_mini, m, dmamap);
1994 				continue;
1995 			}
1996 		} else {
1997 			TI_INC(sc->ti_std, TI_STD_RX_RING_CNT);
1998 			m = sc->ti_cdata.ti_rx_std_chain[rxidx];
1999 			sc->ti_cdata.ti_rx_std_chain[rxidx] = NULL;
2000 			dmamap = sc->std_dmamap[rxidx];
2001 			sc->std_dmamap[rxidx] = 0;
2002 			if (cur_rx->ti_flags & TI_BDFLAG_ERROR) {
2003 				ifp->if_ierrors++;
2004 				ti_newbuf_std(sc, sc->ti_std, m, dmamap);
2005 				continue;
2006 			}
2007 			if (ti_newbuf_std(sc, sc->ti_std, NULL, dmamap)
2008 			    == ENOBUFS) {
2009 				ifp->if_ierrors++;
2010 				ti_newbuf_std(sc, sc->ti_std, m, dmamap);
2011 				continue;
2012 			}
2013 		}
2014 
2015 		m->m_pkthdr.len = m->m_len = cur_rx->ti_len;
2016 		ifp->if_ipackets++;
2017 		m->m_pkthdr.rcvif = ifp;
2018 
2019 #if NBPFILTER > 0
2020 		/*
2021 	 	 * Handle BPF listeners. Let the BPF user see the packet, but
2022 	 	 * don't pass it up to the ether_input() layer unless it's
2023 	 	 * a broadcast packet, multicast packet, matches our ethernet
2024 	 	 * address or the interface is in promiscuous mode.
2025 	 	 */
2026 		if (ifp->if_bpf)
2027 			bpf_mtap(ifp->if_bpf, m);
2028 #endif
2029 
2030 		eh = mtod(m, struct ether_header *);
2031 		switch (ntohs(eh->ether_type)) {
2032 #ifdef INET
2033 		case ETHERTYPE_IP:
2034 		    {
2035 			struct ip *ip = (struct ip *) (eh + 1);
2036 
2037 			/*
2038 			 * Note the Tigon firmware does not invert
2039 			 * the checksum for us, hence the XOR.
2040 			 */
2041 			m->m_pkthdr.csum_flags |= M_CSUM_IPv4;
2042 			if ((cur_rx->ti_ip_cksum ^ 0xffff) != 0)
2043 				m->m_pkthdr.csum_flags |= M_CSUM_IPv4_BAD;
2044 			/*
2045 			 * ntohs() the constant so the compiler can
2046 			 * optimize...
2047 			 *
2048 			 * XXX Figure out a sane way to deal with
2049 			 * fragmented packets.
2050 			 */
2051 			if ((ip->ip_off & htons(IP_MF|IP_OFFMASK)) == 0) {
2052 				switch (ip->ip_p) {
2053 				case IPPROTO_TCP:
2054 					m->m_pkthdr.csum_data =
2055 					    cur_rx->ti_tcp_udp_cksum;
2056 					m->m_pkthdr.csum_flags |=
2057 					    M_CSUM_TCPv4|M_CSUM_DATA;
2058 					break;
2059 				case IPPROTO_UDP:
2060 					m->m_pkthdr.csum_data =
2061 					    cur_rx->ti_tcp_udp_cksum;
2062 					m->m_pkthdr.csum_flags |=
2063 					    M_CSUM_UDPv4|M_CSUM_DATA;
2064 					break;
2065 				default:
2066 					/* Nothing */;
2067 				}
2068 			}
2069 			break;
2070 		    }
2071 #endif
2072 		default:
2073 			/* Nothing. */
2074 			break;
2075 		}
2076 
2077 		if (have_tag) {
2078 			struct mbuf *n;
2079 			n = m_aux_add(m, AF_LINK, ETHERTYPE_VLAN);
2080 			if (n) {
2081 				*mtod(n, int *) = vlan_tag;
2082 				n->m_len = sizeof(int);
2083 			} else {
2084 				printf("%s: no mbuf for tag\n", ifp->if_xname);
2085 				m_freem(m);
2086 				continue;
2087 			}
2088 			have_tag = vlan_tag = 0;
2089 		}
2090 		(*ifp->if_input)(ifp, m);
2091 	}
2092 
2093 	/* Only necessary on the Tigon 1. */
2094 	if (sc->ti_hwrev == TI_HWREV_TIGON)
2095 		CSR_WRITE_4(sc, TI_GCR_RXRETURNCONS_IDX,
2096 		    sc->ti_rx_saved_considx);
2097 
2098 	TI_UPDATE_STDPROD(sc, sc->ti_std);
2099 	TI_UPDATE_MINIPROD(sc, sc->ti_mini);
2100 	TI_UPDATE_JUMBOPROD(sc, sc->ti_jumbo);
2101 
2102 	return;
2103 }
2104 
2105 static void ti_txeof_tigon1(sc)
2106 	struct ti_softc		*sc;
2107 {
2108 	struct ti_tx_desc	*cur_tx = NULL;
2109 	struct ifnet		*ifp;
2110 	struct txdmamap_pool_entry *dma;
2111 
2112 	ifp = &sc->ethercom.ec_if;
2113 
2114 	/*
2115 	 * Go through our tx ring and free mbufs for those
2116 	 * frames that have been sent.
2117 	 */
2118 	while (sc->ti_tx_saved_considx != sc->ti_tx_considx.ti_idx) {
2119 		u_int32_t		idx = 0;
2120 
2121 		idx = sc->ti_tx_saved_considx;
2122 		if (idx > 383)
2123 			CSR_WRITE_4(sc, TI_WINBASE,
2124 			    TI_TX_RING_BASE + 6144);
2125 		else if (idx > 255)
2126 			CSR_WRITE_4(sc, TI_WINBASE,
2127 			    TI_TX_RING_BASE + 4096);
2128 		else if (idx > 127)
2129 			CSR_WRITE_4(sc, TI_WINBASE,
2130 			    TI_TX_RING_BASE + 2048);
2131 		else
2132 			CSR_WRITE_4(sc, TI_WINBASE,
2133 			    TI_TX_RING_BASE);
2134 		cur_tx = &sc->ti_tx_ring_nic[idx % 128];
2135 		if (cur_tx->ti_flags & TI_BDFLAG_END)
2136 			ifp->if_opackets++;
2137 		if (sc->ti_cdata.ti_tx_chain[idx] != NULL) {
2138 			m_freem(sc->ti_cdata.ti_tx_chain[idx]);
2139 			sc->ti_cdata.ti_tx_chain[idx] = NULL;
2140 
2141 			dma = sc->txdma[idx];
2142 			KDASSERT(dma != NULL);
2143 			bus_dmamap_sync(sc->sc_dmat, dma->dmamap, 0,
2144 			    dma->dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE);
2145 			bus_dmamap_unload(sc->sc_dmat, dma->dmamap);
2146 
2147 			SIMPLEQ_INSERT_HEAD(&sc->txdma_list, dma, link);
2148 			sc->txdma[idx] = NULL;
2149 		}
2150 		sc->ti_txcnt--;
2151 		TI_INC(sc->ti_tx_saved_considx, TI_TX_RING_CNT);
2152 		ifp->if_timer = 0;
2153 	}
2154 
2155 	if (cur_tx != NULL)
2156 		ifp->if_flags &= ~IFF_OACTIVE;
2157 
2158 	return;
2159 }
2160 
2161 static void ti_txeof_tigon2(sc)
2162 	struct ti_softc		*sc;
2163 {
2164 	struct ti_tx_desc	*cur_tx = NULL;
2165 	struct ifnet		*ifp;
2166 	struct txdmamap_pool_entry *dma;
2167 	int firstidx, cnt;
2168 
2169 	ifp = &sc->ethercom.ec_if;
2170 
2171 	/*
2172 	 * Go through our tx ring and free mbufs for those
2173 	 * frames that have been sent.
2174 	 */
2175 	firstidx = sc->ti_tx_saved_considx;
2176 	cnt = 0;
2177 	while (sc->ti_tx_saved_considx != sc->ti_tx_considx.ti_idx) {
2178 		u_int32_t		idx = 0;
2179 
2180 		idx = sc->ti_tx_saved_considx;
2181 		cur_tx = &sc->ti_rdata->ti_tx_ring[idx];
2182 		if (cur_tx->ti_flags & TI_BDFLAG_END)
2183 			ifp->if_opackets++;
2184 		if (sc->ti_cdata.ti_tx_chain[idx] != NULL) {
2185 			m_freem(sc->ti_cdata.ti_tx_chain[idx]);
2186 			sc->ti_cdata.ti_tx_chain[idx] = NULL;
2187 
2188 			dma = sc->txdma[idx];
2189 			KDASSERT(dma != NULL);
2190 			bus_dmamap_sync(sc->sc_dmat, dma->dmamap, 0,
2191 			    dma->dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE);
2192 			bus_dmamap_unload(sc->sc_dmat, dma->dmamap);
2193 
2194 			SIMPLEQ_INSERT_HEAD(&sc->txdma_list, dma, link);
2195 			sc->txdma[idx] = NULL;
2196 		}
2197 		cnt++;
2198 		sc->ti_txcnt--;
2199 		TI_INC(sc->ti_tx_saved_considx, TI_TX_RING_CNT);
2200 		ifp->if_timer = 0;
2201 	}
2202 
2203 	if (cnt != 0)
2204 		TI_CDTXSYNC(sc, firstidx, cnt, BUS_DMASYNC_POSTWRITE);
2205 
2206 	if (cur_tx != NULL)
2207 		ifp->if_flags &= ~IFF_OACTIVE;
2208 
2209 	return;
2210 }
2211 
2212 static int ti_intr(xsc)
2213 	void			*xsc;
2214 {
2215 	struct ti_softc		*sc;
2216 	struct ifnet		*ifp;
2217 
2218 	sc = xsc;
2219 	ifp = &sc->ethercom.ec_if;
2220 
2221 #ifdef notdef
2222 	/* Avoid this for now -- checking this register is expensive. */
2223 	/* Make sure this is really our interrupt. */
2224 	if (!(CSR_READ_4(sc, TI_MISC_HOST_CTL) & TI_MHC_INTSTATE))
2225 		return (0);
2226 #endif
2227 
2228 	/* Ack interrupt and stop others from occuring. */
2229 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
2230 
2231 	if (ifp->if_flags & IFF_RUNNING) {
2232 		/* Check RX return ring producer/consumer */
2233 		ti_rxeof(sc);
2234 
2235 		/* Check TX ring producer/consumer */
2236 		(*sc->sc_tx_eof)(sc);
2237 	}
2238 
2239 	ti_handle_events(sc);
2240 
2241 	/* Re-enable interrupts. */
2242 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0);
2243 
2244 	if ((ifp->if_flags & IFF_RUNNING) != 0 &&
2245 	    IFQ_IS_EMPTY(&ifp->if_snd) == 0)
2246 		ti_start(ifp);
2247 
2248 	return (1);
2249 }
2250 
2251 static void ti_stats_update(sc)
2252 	struct ti_softc		*sc;
2253 {
2254 	struct ifnet		*ifp;
2255 
2256 	ifp = &sc->ethercom.ec_if;
2257 
2258 	TI_CDSTATSSYNC(sc, BUS_DMASYNC_POSTREAD);
2259 
2260 	ifp->if_collisions +=
2261 	   (sc->ti_rdata->ti_info.ti_stats.dot3StatsSingleCollisionFrames +
2262 	   sc->ti_rdata->ti_info.ti_stats.dot3StatsMultipleCollisionFrames +
2263 	   sc->ti_rdata->ti_info.ti_stats.dot3StatsExcessiveCollisions +
2264 	   sc->ti_rdata->ti_info.ti_stats.dot3StatsLateCollisions) -
2265 	   ifp->if_collisions;
2266 
2267 	TI_CDSTATSSYNC(sc, BUS_DMASYNC_PREREAD);
2268 }
2269 
2270 /*
2271  * Encapsulate an mbuf chain in the tx ring  by coupling the mbuf data
2272  * pointers to descriptors.
2273  */
2274 static int ti_encap_tigon1(sc, m_head, txidx)
2275 	struct ti_softc		*sc;
2276 	struct mbuf		*m_head;
2277 	u_int32_t		*txidx;
2278 {
2279 	struct ti_tx_desc	*f = NULL;
2280 	u_int32_t		frag, cur, cnt = 0;
2281 	struct txdmamap_pool_entry *dma;
2282 	bus_dmamap_t dmamap;
2283 	int error, i;
2284 	struct mbuf *n;
2285 	u_int16_t csum_flags = 0;
2286 
2287 	dma = SIMPLEQ_FIRST(&sc->txdma_list);
2288 	if (dma == NULL) {
2289 		return ENOMEM;
2290 	}
2291 	dmamap = dma->dmamap;
2292 
2293 	error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m_head,
2294 	    BUS_DMA_WRITE);
2295 	if (error) {
2296 		struct mbuf *m;
2297 		int i = 0;
2298 		for (m = m_head; m; m = m->m_next)
2299 			i++;
2300 		printf("ti_encap: bus_dmamap_load_mbuf (len %d, %d frags) "
2301 		       "error %d\n", m_head->m_pkthdr.len, i, error);
2302 		return (ENOMEM);
2303 	}
2304 
2305 	cur = frag = *txidx;
2306 
2307 	if (m_head->m_pkthdr.csum_flags & M_CSUM_IPv4) {
2308 		/* IP header checksum field must be 0! */
2309 		csum_flags |= TI_BDFLAG_IP_CKSUM;
2310 	}
2311 	if (m_head->m_pkthdr.csum_flags & (M_CSUM_TCPv4|M_CSUM_UDPv4))
2312 		csum_flags |= TI_BDFLAG_TCP_UDP_CKSUM;
2313 
2314 	/* XXX fragmented packet checksum capability? */
2315 
2316 	/*
2317  	 * Start packing the mbufs in this chain into
2318 	 * the fragment pointers. Stop when we run out
2319  	 * of fragments or hit the end of the mbuf chain.
2320 	 */
2321 	for (i = 0; i < dmamap->dm_nsegs; i++) {
2322 		if (frag > 383)
2323 			CSR_WRITE_4(sc, TI_WINBASE,
2324 			    TI_TX_RING_BASE + 6144);
2325 		else if (frag > 255)
2326 			CSR_WRITE_4(sc, TI_WINBASE,
2327 			    TI_TX_RING_BASE + 4096);
2328 		else if (frag > 127)
2329 			CSR_WRITE_4(sc, TI_WINBASE,
2330 			    TI_TX_RING_BASE + 2048);
2331 		else
2332 			CSR_WRITE_4(sc, TI_WINBASE,
2333 			    TI_TX_RING_BASE);
2334 		f = &sc->ti_tx_ring_nic[frag % 128];
2335 		if (sc->ti_cdata.ti_tx_chain[frag] != NULL)
2336 			break;
2337 		TI_HOSTADDR(f->ti_addr) = dmamap->dm_segs[i].ds_addr;
2338 		f->ti_len = dmamap->dm_segs[i].ds_len;
2339 		f->ti_flags = csum_flags;
2340 		n = m_aux_find(m_head, AF_LINK, ETHERTYPE_VLAN);
2341 		if (n) {
2342 			f->ti_flags |= TI_BDFLAG_VLAN_TAG;
2343 			f->ti_vlan_tag = *mtod(n, int *);
2344 		} else {
2345 			f->ti_vlan_tag = 0;
2346 		}
2347 		/*
2348 		 * Sanity check: avoid coming within 16 descriptors
2349 		 * of the end of the ring.
2350 		 */
2351 		if ((TI_TX_RING_CNT - (sc->ti_txcnt + cnt)) < 16)
2352 			return(ENOBUFS);
2353 		cur = frag;
2354 		TI_INC(frag, TI_TX_RING_CNT);
2355 		cnt++;
2356 	}
2357 
2358 	if (i < dmamap->dm_nsegs)
2359 		return(ENOBUFS);
2360 
2361 	if (frag == sc->ti_tx_saved_considx)
2362 		return(ENOBUFS);
2363 
2364 	sc->ti_tx_ring_nic[cur % 128].ti_flags |=
2365 	    TI_BDFLAG_END;
2366 
2367 	/* Sync the packet's DMA map. */
2368 	bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize,
2369 	    BUS_DMASYNC_PREWRITE);
2370 
2371 	sc->ti_cdata.ti_tx_chain[cur] = m_head;
2372 	SIMPLEQ_REMOVE_HEAD(&sc->txdma_list, dma, link);
2373 	sc->txdma[cur] = dma;
2374 	sc->ti_txcnt += cnt;
2375 
2376 	*txidx = frag;
2377 
2378 	return(0);
2379 }
2380 
2381 static int ti_encap_tigon2(sc, m_head, txidx)
2382 	struct ti_softc		*sc;
2383 	struct mbuf		*m_head;
2384 	u_int32_t		*txidx;
2385 {
2386 	struct ti_tx_desc	*f = NULL;
2387 	u_int32_t		frag, firstfrag, cur, cnt = 0;
2388 	struct txdmamap_pool_entry *dma;
2389 	bus_dmamap_t dmamap;
2390 	int error, i;
2391 	struct mbuf *n;
2392 	u_int16_t csum_flags = 0;
2393 
2394 	dma = SIMPLEQ_FIRST(&sc->txdma_list);
2395 	if (dma == NULL) {
2396 		return ENOMEM;
2397 	}
2398 	dmamap = dma->dmamap;
2399 
2400 	error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m_head,
2401 	    BUS_DMA_WRITE);
2402 	if (error) {
2403 		struct mbuf *m;
2404 		int i = 0;
2405 		for (m = m_head; m; m = m->m_next)
2406 			i++;
2407 		printf("ti_encap: bus_dmamap_load_mbuf (len %d, %d frags) "
2408 		       "error %d\n", m_head->m_pkthdr.len, i, error);
2409 		return (ENOMEM);
2410 	}
2411 
2412 	cur = firstfrag = frag = *txidx;
2413 
2414 	if (m_head->m_pkthdr.csum_flags & M_CSUM_IPv4) {
2415 		/* IP header checksum field must be 0! */
2416 		csum_flags |= TI_BDFLAG_IP_CKSUM;
2417 	}
2418 	if (m_head->m_pkthdr.csum_flags & (M_CSUM_TCPv4|M_CSUM_UDPv4))
2419 		csum_flags |= TI_BDFLAG_TCP_UDP_CKSUM;
2420 
2421 	/* XXX fragmented packet checksum capability? */
2422 
2423 	/*
2424  	 * Start packing the mbufs in this chain into
2425 	 * the fragment pointers. Stop when we run out
2426  	 * of fragments or hit the end of the mbuf chain.
2427 	 */
2428 	for (i = 0; i < dmamap->dm_nsegs; i++) {
2429 		f = &sc->ti_rdata->ti_tx_ring[frag];
2430 		if (sc->ti_cdata.ti_tx_chain[frag] != NULL)
2431 			break;
2432 		TI_HOSTADDR(f->ti_addr) = dmamap->dm_segs[i].ds_addr;
2433 		f->ti_len = dmamap->dm_segs[i].ds_len;
2434 		f->ti_flags = csum_flags;
2435 		n = m_aux_find(m_head, AF_LINK, ETHERTYPE_VLAN);
2436 		if (n) {
2437 			f->ti_flags |= TI_BDFLAG_VLAN_TAG;
2438 			f->ti_vlan_tag = *mtod(n, int *);
2439 		} else {
2440 			f->ti_vlan_tag = 0;
2441 		}
2442 		/*
2443 		 * Sanity check: avoid coming within 16 descriptors
2444 		 * of the end of the ring.
2445 		 */
2446 		if ((TI_TX_RING_CNT - (sc->ti_txcnt + cnt)) < 16)
2447 			return(ENOBUFS);
2448 		cur = frag;
2449 		TI_INC(frag, TI_TX_RING_CNT);
2450 		cnt++;
2451 	}
2452 
2453 	if (i < dmamap->dm_nsegs)
2454 		return(ENOBUFS);
2455 
2456 	if (frag == sc->ti_tx_saved_considx)
2457 		return(ENOBUFS);
2458 
2459 	sc->ti_rdata->ti_tx_ring[cur].ti_flags |= TI_BDFLAG_END;
2460 
2461 	/* Sync the packet's DMA map. */
2462 	bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize,
2463 	    BUS_DMASYNC_PREWRITE);
2464 
2465 	/* Sync the descriptors we are using. */
2466 	TI_CDTXSYNC(sc, firstfrag, cnt, BUS_DMASYNC_PREWRITE);
2467 
2468 	sc->ti_cdata.ti_tx_chain[cur] = m_head;
2469 	SIMPLEQ_REMOVE_HEAD(&sc->txdma_list, dma, link);
2470 	sc->txdma[cur] = dma;
2471 	sc->ti_txcnt += cnt;
2472 
2473 	*txidx = frag;
2474 
2475 	return(0);
2476 }
2477 
2478 /*
2479  * Main transmit routine. To avoid having to do mbuf copies, we put pointers
2480  * to the mbuf data regions directly in the transmit descriptors.
2481  */
2482 static void ti_start(ifp)
2483 	struct ifnet		*ifp;
2484 {
2485 	struct ti_softc		*sc;
2486 	struct mbuf		*m_head = NULL;
2487 	u_int32_t		prodidx = 0;
2488 
2489 	sc = ifp->if_softc;
2490 
2491 	prodidx = CSR_READ_4(sc, TI_MB_SENDPROD_IDX);
2492 
2493 	while (sc->ti_cdata.ti_tx_chain[prodidx] == NULL) {
2494 		IFQ_POLL(&ifp->if_snd, m_head);
2495 		if (m_head == NULL)
2496 			break;
2497 
2498 		/*
2499 		 * Pack the data into the transmit ring. If we
2500 		 * don't have room, set the OACTIVE flag and wait
2501 		 * for the NIC to drain the ring.
2502 		 */
2503 		if ((*sc->sc_tx_encap)(sc, m_head, &prodidx)) {
2504 			ifp->if_flags |= IFF_OACTIVE;
2505 			break;
2506 		}
2507 
2508 		IFQ_DEQUEUE(&ifp->if_snd, m_head);
2509 
2510 		/*
2511 		 * If there's a BPF listener, bounce a copy of this frame
2512 		 * to him.
2513 		 */
2514 #if NBPFILTER > 0
2515 		if (ifp->if_bpf)
2516 			bpf_mtap(ifp->if_bpf, m_head);
2517 #endif
2518 	}
2519 
2520 	/* Transmit */
2521 	CSR_WRITE_4(sc, TI_MB_SENDPROD_IDX, prodidx);
2522 
2523 	/*
2524 	 * Set a timeout in case the chip goes out to lunch.
2525 	 */
2526 	ifp->if_timer = 5;
2527 
2528 	return;
2529 }
2530 
2531 static void ti_init(xsc)
2532 	void			*xsc;
2533 {
2534 	struct ti_softc		*sc = xsc;
2535         int			s;
2536 
2537 	s = splnet();
2538 
2539 	/* Cancel pending I/O and flush buffers. */
2540 	ti_stop(sc);
2541 
2542 	/* Init the gen info block, ring control blocks and firmware. */
2543 	if (ti_gibinit(sc)) {
2544 		printf("%s: initialization failure\n", sc->sc_dev.dv_xname);
2545 		splx(s);
2546 		return;
2547 	}
2548 
2549 	splx(s);
2550 
2551 	return;
2552 }
2553 
2554 static void ti_init2(sc)
2555 	struct ti_softc		*sc;
2556 {
2557 	struct ti_cmd_desc	cmd;
2558 	struct ifnet		*ifp;
2559 	u_int8_t		*m;
2560 	struct ifmedia		*ifm;
2561 	int			tmp;
2562 
2563 	ifp = &sc->ethercom.ec_if;
2564 
2565 	/* Specify MTU and interface index. */
2566 	CSR_WRITE_4(sc, TI_GCR_IFINDEX, sc->sc_dev.dv_unit); /* ??? */
2567 
2568 	tmp = ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
2569 	if (sc->ethercom.ec_capenable & ETHERCAP_VLAN_MTU)
2570 		tmp += ETHER_VLAN_ENCAP_LEN;
2571 	CSR_WRITE_4(sc, TI_GCR_IFMTU, tmp);
2572 
2573 	TI_DO_CMD(TI_CMD_UPDATE_GENCOM, 0, 0);
2574 
2575 	/* Load our MAC address. */
2576 	m = (u_int8_t *)LLADDR(ifp->if_sadl);
2577 	CSR_WRITE_4(sc, TI_GCR_PAR0, (m[0] << 8) | m[1]);
2578 	CSR_WRITE_4(sc, TI_GCR_PAR1, (m[2] << 24) | (m[3] << 16)
2579 		    | (m[4] << 8) | m[5]);
2580 	TI_DO_CMD(TI_CMD_SET_MAC_ADDR, 0, 0);
2581 
2582 	/* Enable or disable promiscuous mode as needed. */
2583 	if (ifp->if_flags & IFF_PROMISC) {
2584 		TI_DO_CMD(TI_CMD_SET_PROMISC_MODE, TI_CMD_CODE_PROMISC_ENB, 0);
2585 	} else {
2586 		TI_DO_CMD(TI_CMD_SET_PROMISC_MODE, TI_CMD_CODE_PROMISC_DIS, 0);
2587 	}
2588 
2589 	/* Program multicast filter. */
2590 	ti_setmulti(sc);
2591 
2592 	/*
2593 	 * If this is a Tigon 1, we should tell the
2594 	 * firmware to use software packet filtering.
2595 	 */
2596 	if (sc->ti_hwrev == TI_HWREV_TIGON) {
2597 		TI_DO_CMD(TI_CMD_FDR_FILTERING, TI_CMD_CODE_FILT_ENB, 0);
2598 	}
2599 
2600 	/* Init RX ring. */
2601 	ti_init_rx_ring_std(sc);
2602 
2603 	/* Init jumbo RX ring. */
2604 	if (ifp->if_mtu > (MCLBYTES - ETHER_HDR_LEN - ETHER_CRC_LEN))
2605 		ti_init_rx_ring_jumbo(sc);
2606 
2607 	/*
2608 	 * If this is a Tigon 2, we can also configure the
2609 	 * mini ring.
2610 	 */
2611 	if (sc->ti_hwrev == TI_HWREV_TIGON_II)
2612 		ti_init_rx_ring_mini(sc);
2613 
2614 	CSR_WRITE_4(sc, TI_GCR_RXRETURNCONS_IDX, 0);
2615 	sc->ti_rx_saved_considx = 0;
2616 
2617 	/* Init TX ring. */
2618 	ti_init_tx_ring(sc);
2619 
2620 	/* Tell firmware we're alive. */
2621 	TI_DO_CMD(TI_CMD_HOST_STATE, TI_CMD_CODE_STACK_UP, 0);
2622 
2623 	/* Enable host interrupts. */
2624 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 0);
2625 
2626 	ifp->if_flags |= IFF_RUNNING;
2627 	ifp->if_flags &= ~IFF_OACTIVE;
2628 
2629 	/*
2630 	 * Make sure to set media properly. We have to do this
2631 	 * here since we have to issue commands in order to set
2632 	 * the link negotiation and we can't issue commands until
2633 	 * the firmware is running.
2634 	 */
2635 	ifm = &sc->ifmedia;
2636 	tmp = ifm->ifm_media;
2637 	ifm->ifm_media = ifm->ifm_cur->ifm_media;
2638 	ti_ifmedia_upd(ifp);
2639 	ifm->ifm_media = tmp;
2640 
2641 	return;
2642 }
2643 
2644 /*
2645  * Set media options.
2646  */
2647 static int ti_ifmedia_upd(ifp)
2648 	struct ifnet		*ifp;
2649 {
2650 	struct ti_softc		*sc;
2651 	struct ifmedia		*ifm;
2652 	struct ti_cmd_desc	cmd;
2653 
2654 	sc = ifp->if_softc;
2655 	ifm = &sc->ifmedia;
2656 
2657 	if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
2658 		return(EINVAL);
2659 
2660 	switch(IFM_SUBTYPE(ifm->ifm_media)) {
2661 	case IFM_AUTO:
2662 		CSR_WRITE_4(sc, TI_GCR_GLINK, TI_GLNK_PREF|TI_GLNK_1000MB|
2663 		    TI_GLNK_FULL_DUPLEX|TI_GLNK_RX_FLOWCTL_Y|
2664 		    TI_GLNK_AUTONEGENB|TI_GLNK_ENB);
2665 		CSR_WRITE_4(sc, TI_GCR_LINK, TI_LNK_100MB|TI_LNK_10MB|
2666 		    TI_LNK_FULL_DUPLEX|TI_LNK_HALF_DUPLEX|
2667 		    TI_LNK_AUTONEGENB|TI_LNK_ENB);
2668 		TI_DO_CMD(TI_CMD_LINK_NEGOTIATION,
2669 		    TI_CMD_CODE_NEGOTIATE_BOTH, 0);
2670 		break;
2671 	case IFM_1000_SX:
2672 	case IFM_1000_T:
2673 		if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) {
2674 			CSR_WRITE_4(sc, TI_GCR_GLINK,
2675 			    TI_GLNK_PREF|TI_GLNK_1000MB|TI_GLNK_FULL_DUPLEX|
2676 			    TI_GLNK_RX_FLOWCTL_Y|TI_GLNK_ENB);
2677 		} else {
2678 			CSR_WRITE_4(sc, TI_GCR_GLINK,
2679 			    TI_GLNK_PREF|TI_GLNK_1000MB|
2680 			    TI_GLNK_RX_FLOWCTL_Y|TI_GLNK_ENB);
2681 		}
2682 		CSR_WRITE_4(sc, TI_GCR_LINK, 0);
2683 		TI_DO_CMD(TI_CMD_LINK_NEGOTIATION,
2684 		    TI_CMD_CODE_NEGOTIATE_GIGABIT, 0);
2685 		break;
2686 	case IFM_100_FX:
2687 	case IFM_10_FL:
2688 	case IFM_100_TX:
2689 	case IFM_10_T:
2690 		CSR_WRITE_4(sc, TI_GCR_GLINK, 0);
2691 		CSR_WRITE_4(sc, TI_GCR_LINK, TI_LNK_ENB|TI_LNK_PREF);
2692 		if (IFM_SUBTYPE(ifm->ifm_media) == IFM_100_FX ||
2693 		    IFM_SUBTYPE(ifm->ifm_media) == IFM_100_TX) {
2694 			TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_100MB);
2695 		} else {
2696 			TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_10MB);
2697 		}
2698 		if ((ifm->ifm_media & IFM_GMASK) == IFM_FDX) {
2699 			TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_FULL_DUPLEX);
2700 		} else {
2701 			TI_SETBIT(sc, TI_GCR_LINK, TI_LNK_HALF_DUPLEX);
2702 		}
2703 		TI_DO_CMD(TI_CMD_LINK_NEGOTIATION,
2704 		    TI_CMD_CODE_NEGOTIATE_10_100, 0);
2705 		break;
2706 	}
2707 
2708 	sc->ethercom.ec_if.if_baudrate =
2709 	    ifmedia_baudrate(ifm->ifm_media);
2710 
2711 	return(0);
2712 }
2713 
2714 /*
2715  * Report current media status.
2716  */
2717 static void ti_ifmedia_sts(ifp, ifmr)
2718 	struct ifnet		*ifp;
2719 	struct ifmediareq	*ifmr;
2720 {
2721 	struct ti_softc		*sc;
2722 	u_int32_t               media = 0;
2723 
2724 	sc = ifp->if_softc;
2725 
2726 	ifmr->ifm_status = IFM_AVALID;
2727 	ifmr->ifm_active = IFM_ETHER;
2728 
2729 	if (sc->ti_linkstat == TI_EV_CODE_LINK_DOWN)
2730 		return;
2731 
2732 	ifmr->ifm_status |= IFM_ACTIVE;
2733 
2734 	if (sc->ti_linkstat == TI_EV_CODE_GIG_LINK_UP) {
2735 		media = CSR_READ_4(sc, TI_GCR_GLINK_STAT);
2736 		if (sc->ti_copper)
2737 			ifmr->ifm_active |= IFM_1000_T;
2738 		else
2739 			ifmr->ifm_active |= IFM_1000_SX;
2740 		if (media & TI_GLNK_FULL_DUPLEX)
2741 			ifmr->ifm_active |= IFM_FDX;
2742 		else
2743 			ifmr->ifm_active |= IFM_HDX;
2744 	} else if (sc->ti_linkstat == TI_EV_CODE_LINK_UP) {
2745 		media = CSR_READ_4(sc, TI_GCR_LINK_STAT);
2746 		if (sc->ti_copper) {
2747 			if (media & TI_LNK_100MB)
2748 				ifmr->ifm_active |= IFM_100_TX;
2749 			if (media & TI_LNK_10MB)
2750 				ifmr->ifm_active |= IFM_10_T;
2751 		} else {
2752 			if (media & TI_LNK_100MB)
2753 				ifmr->ifm_active |= IFM_100_FX;
2754 			if (media & TI_LNK_10MB)
2755 				ifmr->ifm_active |= IFM_10_FL;
2756 		}
2757 		if (media & TI_LNK_FULL_DUPLEX)
2758 			ifmr->ifm_active |= IFM_FDX;
2759 		if (media & TI_LNK_HALF_DUPLEX)
2760 			ifmr->ifm_active |= IFM_HDX;
2761 	}
2762 
2763 	sc->ethercom.ec_if.if_baudrate =
2764 	    ifmedia_baudrate(sc->ifmedia.ifm_media);
2765 
2766 	return;
2767 }
2768 
2769 static int
2770 ti_ether_ioctl(ifp, cmd, data)
2771 	struct ifnet *ifp;
2772 	u_long cmd;
2773 	caddr_t data;
2774 {
2775 	struct ifaddr *ifa = (struct ifaddr *) data;
2776 	struct ti_softc *sc = ifp->if_softc;
2777 
2778 	if ((ifp->if_flags & IFF_UP) == 0) {
2779 		ifp->if_flags |= IFF_UP;
2780 		ti_init(sc);
2781 	}
2782 
2783 	switch (cmd) {
2784 	case SIOCSIFADDR:
2785 
2786 		switch (ifa->ifa_addr->sa_family) {
2787 #ifdef INET
2788 		case AF_INET:
2789 			arp_ifinit(ifp, ifa);
2790 			break;
2791 #endif
2792 #ifdef NS
2793 		case AF_NS:
2794 		    {
2795 			 struct ns_addr *ina = &IA_SNS(ifa)->sns_addr;
2796 
2797 			 if (ns_nullhost(*ina))
2798 				ina->x_host = *(union ns_host *)
2799 				    LLADDR(ifp->if_sadl);
2800 			 else
2801 				memcpy(LLADDR(ifp->if_sadl), ina->x_host.c_host,
2802 				    ifp->if_addrlen);
2803 			 break;
2804 		    }
2805 #endif
2806 		default:
2807 			break;
2808 		}
2809 		break;
2810 
2811 	default:
2812 		return (EINVAL);
2813 	}
2814 
2815 	return (0);
2816 }
2817 
2818 static int ti_ioctl(ifp, command, data)
2819 	struct ifnet		*ifp;
2820 	u_long			command;
2821 	caddr_t			data;
2822 {
2823 	struct ti_softc		*sc = ifp->if_softc;
2824 	struct ifreq		*ifr = (struct ifreq *) data;
2825 	int			s, error = 0;
2826 	struct ti_cmd_desc	cmd;
2827 
2828 	s = splnet();
2829 
2830 	switch(command) {
2831 	case SIOCSIFADDR:
2832 	case SIOCGIFADDR:
2833 		error = ti_ether_ioctl(ifp, command, data);
2834 		break;
2835 	case SIOCSIFMTU:
2836 		if (ifr->ifr_mtu > ETHERMTU_JUMBO)
2837 			error = EINVAL;
2838 		else {
2839 			ifp->if_mtu = ifr->ifr_mtu;
2840 			ti_init(sc);
2841 		}
2842 		break;
2843 	case SIOCSIFFLAGS:
2844 		if (ifp->if_flags & IFF_UP) {
2845 			/*
2846 			 * If only the state of the PROMISC flag changed,
2847 			 * then just use the 'set promisc mode' command
2848 			 * instead of reinitializing the entire NIC. Doing
2849 			 * a full re-init means reloading the firmware and
2850 			 * waiting for it to start up, which may take a
2851 			 * second or two.
2852 			 */
2853 			if (ifp->if_flags & IFF_RUNNING &&
2854 			    ifp->if_flags & IFF_PROMISC &&
2855 			    !(sc->ti_if_flags & IFF_PROMISC)) {
2856 				TI_DO_CMD(TI_CMD_SET_PROMISC_MODE,
2857 				    TI_CMD_CODE_PROMISC_ENB, 0);
2858 			} else if (ifp->if_flags & IFF_RUNNING &&
2859 			    !(ifp->if_flags & IFF_PROMISC) &&
2860 			    sc->ti_if_flags & IFF_PROMISC) {
2861 				TI_DO_CMD(TI_CMD_SET_PROMISC_MODE,
2862 				    TI_CMD_CODE_PROMISC_DIS, 0);
2863 			} else
2864 				ti_init(sc);
2865 		} else {
2866 			if (ifp->if_flags & IFF_RUNNING) {
2867 				ti_stop(sc);
2868 			}
2869 		}
2870 		sc->ti_if_flags = ifp->if_flags;
2871 		error = 0;
2872 		break;
2873 	case SIOCADDMULTI:
2874 	case SIOCDELMULTI:
2875 		error = (command == SIOCADDMULTI) ?
2876 		    ether_addmulti(ifr, &sc->ethercom) :
2877 		    ether_delmulti(ifr, &sc->ethercom);
2878 		if (error == ENETRESET) {
2879 			if (ifp->if_flags & IFF_RUNNING)
2880 				ti_setmulti(sc);
2881 			error = 0;
2882 		}
2883 		break;
2884 	case SIOCSIFMEDIA:
2885 	case SIOCGIFMEDIA:
2886 		error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command);
2887 		break;
2888 	default:
2889 		error = EINVAL;
2890 		break;
2891 	}
2892 
2893 	(void)splx(s);
2894 
2895 	return(error);
2896 }
2897 
2898 static void ti_watchdog(ifp)
2899 	struct ifnet		*ifp;
2900 {
2901 	struct ti_softc		*sc;
2902 
2903 	sc = ifp->if_softc;
2904 
2905 	printf("%s: watchdog timeout -- resetting\n", sc->sc_dev.dv_xname);
2906 	ti_stop(sc);
2907 	ti_init(sc);
2908 
2909 	ifp->if_oerrors++;
2910 
2911 	return;
2912 }
2913 
2914 /*
2915  * Stop the adapter and free any mbufs allocated to the
2916  * RX and TX lists.
2917  */
2918 static void ti_stop(sc)
2919 	struct ti_softc		*sc;
2920 {
2921 	struct ifnet		*ifp;
2922 	struct ti_cmd_desc	cmd;
2923 
2924 	ifp = &sc->ethercom.ec_if;
2925 
2926 	/* Disable host interrupts. */
2927 	CSR_WRITE_4(sc, TI_MB_HOSTINTR, 1);
2928 	/*
2929 	 * Tell firmware we're shutting down.
2930 	 */
2931 	TI_DO_CMD(TI_CMD_HOST_STATE, TI_CMD_CODE_STACK_DOWN, 0);
2932 
2933 	/* Halt and reinitialize. */
2934 	ti_chipinit(sc);
2935 	ti_mem(sc, 0x2000, 0x100000 - 0x2000, NULL);
2936 	ti_chipinit(sc);
2937 
2938 	/* Free the RX lists. */
2939 	ti_free_rx_ring_std(sc);
2940 
2941 	/* Free jumbo RX list. */
2942 	ti_free_rx_ring_jumbo(sc);
2943 
2944 	/* Free mini RX list. */
2945 	ti_free_rx_ring_mini(sc);
2946 
2947 	/* Free TX buffers. */
2948 	ti_free_tx_ring(sc);
2949 
2950 	sc->ti_ev_prodidx.ti_idx = 0;
2951 	sc->ti_return_prodidx.ti_idx = 0;
2952 	sc->ti_tx_considx.ti_idx = 0;
2953 	sc->ti_tx_saved_considx = TI_TXCONS_UNSET;
2954 
2955 	ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
2956 
2957 	return;
2958 }
2959 
2960 /*
2961  * Stop all chip I/O so that the kernel's probe routines don't
2962  * get confused by errant DMAs when rebooting.
2963  */
2964 static void ti_shutdown(v)
2965 	void *v;
2966 {
2967 	struct ti_softc		*sc = v;
2968 
2969 	ti_chipinit(sc);
2970 
2971 	return;
2972 }
2973