1 /* $NetBSD: if_ntwoc_pci.c,v 1.28 2012/10/27 17:18:33 chs Exp $ */ 2 3 /* 4 * Copyright (c) 1998 Vixie Enterprises 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. Neither the name of Vixie Enterprises nor the names 17 * of its contributors may be used to endorse or promote products derived 18 * from this software without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY VIXIE ENTERPRISES AND 21 * CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, 22 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 23 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 24 * DISCLAIMED. IN NO EVENT SHALL VIXIE ENTERPRISES OR 25 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 28 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 29 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 * 34 * This software has been written for Vixie Enterprises by Michael Graff 35 * <explorer@flame.org>. To learn more about Vixie Enterprises, see 36 * ``http://www.vix.com''. 37 */ 38 39 #include <sys/cdefs.h> 40 __KERNEL_RCSID(0, "$NetBSD: if_ntwoc_pci.c,v 1.28 2012/10/27 17:18:33 chs Exp $"); 41 42 #include <sys/param.h> 43 #include <sys/systm.h> 44 #include <sys/device.h> 45 #include <sys/mbuf.h> 46 #include <sys/socket.h> 47 48 #include <net/if.h> 49 50 #include <sys/cpu.h> 51 #include <sys/bus.h> 52 #include <sys/intr.h> 53 54 #include <dev/pci/pcivar.h> 55 #include <dev/pci/pcireg.h> 56 #include <dev/pci/pcidevs.h> 57 58 #include <dev/ic/hd64570reg.h> 59 #include <dev/ic/hd64570var.h> 60 61 #include <dev/pci/if_ntwoc_pcireg.h> 62 63 #if 0 64 #define NTWO_DEBUG 65 #endif 66 67 #ifdef NTWO_DEBUG 68 #define NTWO_DPRINTF(x) printf x 69 #else 70 #define NTWO_DPRINTF(x) 71 #endif 72 73 /* 74 * buffers per tx and rx channels, per port, and the size of each. 75 * Don't use these constants directly, as they are really only hints. 76 * Use the calculated values stored in struct sca_softc instead. 77 * 78 * Each must be at least 2, receive would be better at around 20 or so. 79 * 80 * XXX Due to a damned near impossible to track down bug, transmit buffers 81 * MUST be 2, no more, no less. 82 */ 83 #ifndef NTWOC_NtxBUFS 84 #define NTWOC_NtxBUFS 40 85 #endif 86 #ifndef NTWOC_NrxBUFS 87 #define NTWOC_NrxBUFS 20 88 #endif 89 90 #if __NetBSD_Version__ >= 104160000 91 static void ntwoc_pci_config_interrupts(device_t); 92 #else 93 #define SCA_BASECLOCK 16000000 94 #endif 95 96 /* 97 * Card specific config register location 98 */ 99 #define PCI_CBMA_ASIC PCI_BAR(0) /* Configuration Base Memory Address */ 100 #define PCI_CBMA_SCA PCI_BAR(2) 101 102 struct ntwoc_pci_softc { 103 /* Generic device stuff */ 104 device_t sc_dev; /* Common to all devices */ 105 106 /* PCI chipset glue */ 107 pci_intr_handle_t *sc_ih; /* Interrupt handler */ 108 pci_chipset_tag_t sc_sr; /* PCI chipset handle */ 109 110 bus_space_tag_t sc_asic_iot; /* space cookie (for ASIC) */ 111 bus_space_handle_t sc_asic_ioh; /* bus space handle (for ASIC) */ 112 113 struct sca_softc sc_sca; /* the SCA itself */ 114 }; 115 116 static int ntwoc_pci_match(device_t, cfdata_t, void *); 117 static void ntwoc_pci_attach(device_t, device_t, void *); 118 119 static int ntwoc_pci_alloc_dma(struct sca_softc *); 120 static void ntwoc_pci_clock_callback(void *, int, int); 121 static void ntwoc_pci_dtr_callback(void *, int, int); 122 static void ntwoc_pci_get_clock(struct sca_port *, u_int8_t, u_int8_t, 123 u_int8_t, u_int8_t); 124 static int ntwoc_pci_intr(void *); 125 static void ntwoc_pci_setup_dma(struct sca_softc *); 126 static void ntwoc_pci_shutdown(void *sc); 127 128 CFATTACH_DECL_NEW(ntwoc_pci, sizeof(struct ntwoc_pci_softc), 129 ntwoc_pci_match, ntwoc_pci_attach, NULL, NULL); 130 131 /* 132 * Names for daughter card types. These match the NTWOC_DB_* defines. 133 */ 134 const char *ntwoc_pci_db_names[] = { 135 "V.35", "Unknown 0x01", "Test", "Unknown 0x03", 136 "RS232", "Unknown 0x05", "RS422", "None" 137 }; 138 139 /* 140 * At least one implementation uses a somewhat strange register address 141 * mapping. If a card doesn't, define this to be a pass-through 142 * macro. (The ntwo driver needs this...) 143 */ 144 #define SCA_REG(y) (((y) & 0x0002) ? (((y) & 0x00fd) + 0x100) : (y)) 145 146 /* 147 * functions that read and write to the sca registers 148 */ 149 static void 150 ntwoc_pci_sca_write_1(struct sca_softc *sc, u_int reg, u_int8_t val) 151 { 152 bus_space_write_1(sc->sc_iot, sc->sc_ioh, SCA_REG(reg), val); 153 } 154 155 static void 156 ntwoc_pci_sca_write_2(struct sca_softc *sc, u_int reg, u_int16_t val) 157 { 158 bus_space_write_2(sc->sc_iot, sc->sc_ioh, SCA_REG(reg), val); 159 } 160 161 static u_int8_t 162 ntwoc_pci_sca_read_1(struct sca_softc *sc, u_int reg) 163 { 164 return 165 bus_space_read_1(sc->sc_iot, sc->sc_ioh, SCA_REG(reg)); 166 } 167 168 static u_int16_t 169 ntwoc_pci_sca_read_2(struct sca_softc *sc, u_int reg) 170 { 171 return 172 bus_space_read_2(sc->sc_iot, sc->sc_ioh, SCA_REG(reg)); 173 } 174 175 176 177 static int 178 ntwoc_pci_match(device_t parent, cfdata_t match, void *aux) 179 { 180 struct pci_attach_args *pa = (struct pci_attach_args *)aux; 181 182 if ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_RISCOM) 183 && (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_RISCOM_N2)) 184 return 1; 185 186 return 0; 187 } 188 189 static void 190 ntwoc_pci_attach(device_t parent, device_t self, void *aux) 191 { 192 struct ntwoc_pci_softc *sc = device_private(self); 193 struct pci_attach_args *pa = aux; 194 struct sca_softc *sca = &sc->sc_sca; 195 pci_intr_handle_t ih; 196 const char *intrstr; 197 pcireg_t csr; 198 u_int8_t tmc, rdiv, tdiv; 199 u_int16_t frontend_cr; 200 u_int16_t db0, db1; 201 u_int32_t flags; 202 u_int numports; 203 204 printf(": N2 Serial Interface\n"); 205 flags = device_cfdata(self)->cf_flags; 206 207 /* 208 * Map in the ASIC configuration space 209 */ 210 if (pci_mapreg_map(pa, PCI_CBMA_ASIC, PCI_MAPREG_TYPE_MEM, 0, 211 &sc->sc_asic_iot, &sc->sc_asic_ioh, NULL, NULL)) { 212 aprint_error_dev(self, "Can't map register space (ASIC)\n"); 213 return; 214 } 215 /* 216 * Map in the serial controller configuration space 217 */ 218 if (pci_mapreg_map(pa, PCI_CBMA_SCA, PCI_MAPREG_TYPE_MEM, 0, 219 &sca->sc_iot, &sca->sc_ioh, NULL, NULL)) { 220 aprint_error_dev(self, "Can't map register space (SCA)\n"); 221 return; 222 } 223 224 /* 225 * Enable the card 226 */ 227 csr = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); 228 pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, csr); 229 230 /* 231 * Map and establish the interrupt 232 */ 233 if (pci_intr_map(pa, &ih)) { 234 aprint_error_dev(self, "couldn't map interrupt\n"); 235 return; 236 } 237 intrstr = pci_intr_string(pa->pa_pc, ih); 238 sc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_NET, ntwoc_pci_intr, 239 sc); 240 if (sc->sc_ih == NULL) { 241 aprint_error_dev(self, "couldn't establish interrupt"); 242 if (intrstr != NULL) 243 aprint_error(" at %s", intrstr); 244 aprint_error("\n"); 245 return; 246 } 247 aprint_normal_dev(self, "interrupting at %s\n", intrstr); 248 249 /* 250 * Perform total black magic. This is not only extremely 251 * disgusting, but it should be explained a lot more in the 252 * card's documentation. 253 * 254 * From what I gather, this does nothing more than configure the 255 * PCI to ISA translator ASIC the N2pci card uses. 256 * 257 * From the FreeBSD driver: 258 * offset 259 * 0x00 - Map Range - Mem-mapped to locate anywhere 260 * 0x04 - Re-Map - PCI address decode enable 261 * 0x18 - Bus Region - 32-bit bus, ready enable 262 * 0x1c - Master Range - include all 16 MB 263 * 0x20 - Master RAM - Map SCA Base at 0 264 * 0x28 - Master Remap - direct master memory enable 265 * 0x68 - Interrupt - Enable interrupt (0 to disable) 266 */ 267 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 268 0x00, 0xfffff000); 269 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 270 0x04, 1); 271 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 272 0x18, 0x40030043); 273 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 274 0x1c, 0xff000000); 275 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 276 0x20, 0); 277 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 278 0x28, 0xe9); 279 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 280 0x68, 0x10900); 281 282 /* 283 * pass the DMA tag to the SCA 284 */ 285 sca->sc_usedma = 1; 286 sca->scu_dmat = pa->pa_dmat; 287 288 /* 289 * Read the configuration information off the daughter card. 290 */ 291 frontend_cr = bus_space_read_2(sca->sc_iot, sca->sc_ioh, NTWOC_FECR); 292 NTWO_DPRINTF(("%s: frontend_cr = 0x%04x\n", 293 device_xname(self), frontend_cr)); 294 295 db0 = (frontend_cr & NTWOC_FECR_ID0) >> NTWOC_FECR_ID0_SHIFT; 296 db1 = (frontend_cr & NTWOC_FECR_ID1) >> NTWOC_FECR_ID1_SHIFT; 297 298 /* 299 * Port 1 HAS to be present. If it isn't, don't attach anything. 300 */ 301 if (db0 == NTWOC_FE_ID_NONE) { 302 printf("%s: no ports available\n", device_xname(self)); 303 return; 304 } 305 306 /* 307 * Port 1 is present. Now, check to see if port 2 is also 308 * present. 309 */ 310 numports = 1; 311 if (db1 != NTWOC_FE_ID_NONE) 312 numports++; 313 314 printf("%s: %d port%s\n", device_xname(self), numports, 315 (numports > 1 ? "s" : "")); 316 printf("%s: port 0 interface card: %s\n", device_xname(self), 317 ntwoc_pci_db_names[db0]); 318 if (numports > 1) 319 printf("%s: port 1 interface card: %s\n", device_xname(self), 320 ntwoc_pci_db_names[db1]); 321 322 /* 323 * enable the RS422 tristate transmit 324 * diable clock output (use receiver clock for both) 325 */ 326 frontend_cr |= (NTWOC_FECR_TE0 | NTWOC_FECR_TE1); 327 frontend_cr &= ~(NTWOC_FECR_ETC0 | NTWOC_FECR_ETC1); 328 bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh, 329 NTWOC_FECR, frontend_cr); 330 331 /* 332 * initialize the SCA. This will allocate DMAable memory based 333 * on the number of ports we passed in, the size of each 334 * buffer, and the number of buffers per port. 335 */ 336 sca->sc_parent = self; 337 sca->sc_read_1 = ntwoc_pci_sca_read_1; 338 sca->sc_read_2 = ntwoc_pci_sca_read_2; 339 sca->sc_write_1 = ntwoc_pci_sca_write_1; 340 sca->sc_write_2 = ntwoc_pci_sca_write_2; 341 sca->sc_dtr_callback = ntwoc_pci_dtr_callback; 342 sca->sc_clock_callback = ntwoc_pci_clock_callback; 343 sca->sc_aux = sc; 344 sca->sc_numports = numports; 345 346 /* 347 * get clock information from user 348 */ 349 rdiv = (flags & NTWOC_FLAGS_RXDIV_MASK) >> NTWOC_FLAGS_RXDIV_SHIFT; 350 if (rdiv > 9) 351 panic("bad rx divisor in flags"); 352 353 tdiv = (flags & NTWOC_FLAGS_TXDIV_MASK) >> NTWOC_FLAGS_TXDIV_SHIFT; 354 if (tdiv > 9) 355 panic("bad tx divisor in flags"); 356 tmc = (flags & NTWOC_FLAGS_TMC_MASK) >> NTWOC_FLAGS_TMC_SHIFT; 357 358 ntwoc_pci_get_clock(&sca->sc_ports[0], flags & NTWOC_FLAGS_CLK0_MASK, 359 tmc, rdiv, tdiv); 360 if (sca->sc_numports > 1) 361 ntwoc_pci_get_clock(&sca->sc_ports[1], 362 (flags & NTWOC_FLAGS_CLK1_MASK) >> NTWOC_FLAGS_CLK1_SHIFT, 363 tmc, rdiv, tdiv); 364 365 /* allocate DMA'able memory for card to use */ 366 ntwoc_pci_alloc_dma(sca); 367 ntwoc_pci_setup_dma(sca); 368 369 sca_init(sca); 370 371 /* 372 * always initialize port 0, since we have to have found it to 373 * get this far. If we have two ports, attach the second 374 * as well. 375 */ 376 sca_port_attach(sca, 0); 377 if (numports == 2) 378 sca_port_attach(sca, 1); 379 380 /* 381 * Add shutdown hook so that DMA is disabled prior to reboot. Not 382 * doing do could allow DMA to corrupt kernel memory during the 383 * reboot before the driver initializes. 384 */ 385 shutdownhook_establish(ntwoc_pci_shutdown, sc); 386 387 #if __NetBSD_Version__ >= 104160000 388 /* 389 * defer getting the base clock until interrupts are enabled 390 * (and thus we have microtime()) 391 */ 392 config_interrupts(self, ntwoc_pci_config_interrupts); 393 #else 394 sca->sc_baseclock = SCA_BASECLOCK; 395 sca_print_clock_info(&sc->sc_sca); 396 #endif 397 } 398 399 /* 400 * extract the clock information for a port from the flags field 401 */ 402 static void 403 ntwoc_pci_get_clock(struct sca_port *scp, u_int8_t flags, u_int8_t tmc, 404 u_int8_t rdiv, u_int8_t tdiv) 405 { 406 scp->sp_eclock = 407 (flags & NTWOC_FLAGS_ECLOCK_MASK) >> NTWOC_FLAGS_ECLOCK_SHIFT; 408 scp->sp_rxs = rdiv; 409 scp->sp_txs = tdiv; 410 scp->sp_tmc = tmc; 411 412 /* get rx source */ 413 switch ((flags & NTWOC_FLAGS_RXS_MASK) >> NTWOC_FLAGS_RXS_SHIFT) { 414 case NTWOC_FLAGS_RXS_LINE: 415 scp->sp_rxs = 0; 416 break; 417 case NTWOC_FLAGS_RXS_LINE_SN: 418 scp->sp_rxs |= SCA_RXS_CLK_LINE_SN; 419 break; 420 case NTWOC_FLAGS_RXS_INTERNAL: 421 scp->sp_rxs |= SCA_RXS_CLK_INTERNAL; 422 break; 423 case NTWOC_FLAGS_RXS_ADPLL_OUT: 424 scp->sp_rxs |= SCA_RXS_CLK_ADPLL_OUT; 425 break; 426 case NTWOC_FLAGS_RXS_ADPLL_IN: 427 scp->sp_rxs |= SCA_RXS_CLK_ADPLL_IN; 428 break; 429 default: 430 panic("bad rx source in flags"); 431 } 432 433 /* get tx source */ 434 switch ((flags & NTWOC_FLAGS_TXS_MASK) >> NTWOC_FLAGS_TXS_SHIFT) { 435 case NTWOC_FLAGS_TXS_LINE: 436 scp->sp_txs = 0; 437 break; 438 case NTWOC_FLAGS_TXS_INTERNAL: 439 scp->sp_txs |= SCA_TXS_CLK_INTERNAL; 440 break; 441 case NTWOC_FLAGS_TXS_RXCLOCK: 442 scp->sp_txs |= SCA_TXS_CLK_RXCLK; 443 break; 444 default: 445 panic("bad rx source in flags"); 446 } 447 } 448 449 450 static int 451 ntwoc_pci_intr(void *arg) 452 { 453 struct ntwoc_pci_softc *sc = (struct ntwoc_pci_softc *)arg; 454 455 return sca_hardintr(&sc->sc_sca); 456 } 457 458 /* 459 * shut down interrupts and DMA, so we don't trash the kernel on warm 460 * boot. Also, lower DTR on each port and disable card interrupts. 461 */ 462 static void 463 ntwoc_pci_shutdown(void *aux) 464 { 465 struct ntwoc_pci_softc *sc = aux; 466 u_int16_t fecr; 467 468 /* 469 * shut down the SCA ports 470 */ 471 sca_shutdown(&sc->sc_sca); 472 473 /* 474 * disable interrupts for the whole card. Black magic, see comment 475 * above. 476 */ 477 bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh, 478 0x68, 0x10900); 479 480 /* 481 * lower DTR on both ports 482 */ 483 fecr = bus_space_read_2(sc->sc_sca.sc_iot, 484 sc->sc_sca.sc_ioh, NTWOC_FECR); 485 fecr |= (NTWOC_FECR_DTR0 | NTWOC_FECR_DTR1); 486 bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh, 487 NTWOC_FECR, fecr); 488 } 489 490 static void 491 ntwoc_pci_dtr_callback(void *aux, int port, int state) 492 { 493 struct ntwoc_pci_softc *sc = aux; 494 u_int16_t fecr; 495 496 fecr = bus_space_read_2(sc->sc_sca.sc_iot, 497 sc->sc_sca.sc_ioh, NTWOC_FECR); 498 499 NTWO_DPRINTF(("dtr: port == %d, state == %d, old fecr: 0x%04x\n", 500 port, state, fecr)); 501 502 if (port == 0) { 503 if (state == 0) 504 fecr |= NTWOC_FECR_DTR0; 505 else 506 fecr &= ~NTWOC_FECR_DTR0; 507 } else { 508 if (state == 0) 509 fecr |= NTWOC_FECR_DTR1; 510 else 511 fecr &= ~NTWOC_FECR_DTR1; 512 } 513 514 NTWO_DPRINTF(("new fecr: 0x%04x\n", fecr)); 515 516 bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh, 517 NTWOC_FECR, fecr); 518 } 519 520 static void 521 ntwoc_pci_clock_callback(void *aux, int port, int enable) 522 { 523 struct ntwoc_pci_softc *sc = aux; 524 u_int16_t fecr; 525 526 fecr = bus_space_read_2(sc->sc_sca.sc_iot, 527 sc->sc_sca.sc_ioh, NTWOC_FECR); 528 529 NTWO_DPRINTF(("clk: port == %d, enable == %d, old fecr: 0x%04x\n", 530 port, enable, fecr)); 531 532 if (port == 0) { 533 if (enable) 534 fecr |= NTWOC_FECR_ETC0; 535 else 536 fecr &= ~NTWOC_FECR_ETC0; 537 } else { 538 if (enable) 539 fecr |= NTWOC_FECR_ETC1; 540 else 541 fecr &= ~NTWOC_FECR_ETC1; 542 } 543 544 NTWO_DPRINTF(("new fecr: 0x%04x\n", fecr)); 545 546 bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh, 547 NTWOC_FECR, fecr); 548 } 549 550 static int 551 ntwoc_pci_alloc_dma(struct sca_softc *sc) 552 { 553 u_int allocsize; 554 int err; 555 int rsegs; 556 u_int bpp; 557 558 /* first initialize the number of descriptors */ 559 sc->sc_ports[0].sp_nrxdesc = NTWOC_NrxBUFS; 560 sc->sc_ports[0].sp_ntxdesc = NTWOC_NtxBUFS; 561 if (sc->sc_numports == 2) { 562 sc->sc_ports[1].sp_nrxdesc = NTWOC_NrxBUFS; 563 sc->sc_ports[1].sp_ntxdesc = NTWOC_NtxBUFS; 564 } 565 566 NTWO_DPRINTF(("sizeof sca_desc_t: %d bytes\n", sizeof (sca_desc_t))); 567 568 bpp = sc->sc_numports * (NTWOC_NtxBUFS + NTWOC_NrxBUFS); 569 570 allocsize = bpp * (SCA_BSIZE + sizeof (sca_desc_t)); 571 572 /* 573 * sanity checks: 574 * 575 * Check the total size of the data buffers, and so on. The total 576 * DMAable space needs to fit within a single 16M region, and the 577 * descriptors need to fit within a 64K region. 578 */ 579 if (allocsize > 16 * 1024 * 1024) 580 return 1; 581 if (bpp * sizeof (sca_desc_t) > 64 * 1024) 582 return 1; 583 584 sc->scu_allocsize = allocsize; 585 586 /* 587 * Allocate one huge chunk of memory. 588 */ 589 if (bus_dmamem_alloc(sc->scu_dmat, 590 allocsize, 591 SCA_DMA_ALIGNMENT, 592 SCA_DMA_BOUNDARY, 593 &sc->scu_seg, 1, &rsegs, BUS_DMA_NOWAIT) != 0) { 594 printf("Could not allocate DMA memory\n"); 595 return 1; 596 } 597 NTWO_DPRINTF(("DMA memory allocated: %d bytes\n", allocsize)); 598 599 if (bus_dmamem_map(sc->scu_dmat, &sc->scu_seg, 1, allocsize, 600 &sc->scu_dma_addr, BUS_DMA_NOWAIT) != 0) { 601 printf("Could not map DMA memory into kernel space\n"); 602 return 1; 603 } 604 NTWO_DPRINTF(("DMA memory mapped\n")); 605 606 if (bus_dmamap_create(sc->scu_dmat, allocsize, 2, 607 allocsize, SCA_DMA_BOUNDARY, 608 BUS_DMA_NOWAIT, &sc->scu_dmam) != 0) { 609 printf("Could not create DMA map\n"); 610 return 1; 611 } 612 NTWO_DPRINTF(("DMA map created\n")); 613 614 err = bus_dmamap_load(sc->scu_dmat, sc->scu_dmam, sc->scu_dma_addr, 615 allocsize, NULL, BUS_DMA_NOWAIT); 616 if (err != 0) { 617 printf("Could not load DMA segment: %d\n", err); 618 return 1; 619 } 620 NTWO_DPRINTF(("DMA map loaded\n")); 621 622 return 0; 623 } 624 625 /* 626 * Take the memory allocated with sca_alloc_dma() and divide it among the 627 * two ports. 628 */ 629 static void 630 ntwoc_pci_setup_dma(struct sca_softc *sc) 631 { 632 sca_port_t *scp0, *scp1; 633 u_int8_t *vaddr0; 634 u_int32_t paddr0; 635 u_long addroff; 636 637 /* 638 * remember the physical address to 24 bits only, since the upper 639 * 8 bits is programed into the device at a different layer. 640 */ 641 paddr0 = (sc->scu_dmam->dm_segs[0].ds_addr & 0x00ffffff); 642 vaddr0 = sc->scu_dma_addr; 643 644 /* 645 * if we have only one port it gets the full range. If we have 646 * two we need to do a little magic to divide things up. 647 * 648 * The descriptors will all end up in the front of the area, while 649 * the remainder of the buffer is used for transmit and receive 650 * data. 651 * 652 * -------------------- start of memory 653 * tx desc port 0 654 * rx desc port 0 655 * tx desc port 1 656 * rx desc port 1 657 * tx buffer port 0 658 * rx buffer port 0 659 * tx buffer port 1 660 * rx buffer port 1 661 * -------------------- end of memory 662 */ 663 scp0 = &sc->sc_ports[0]; 664 scp1 = &sc->sc_ports[1]; 665 666 scp0->sp_txdesc_p = paddr0; 667 scp0->sp_txdesc = (sca_desc_t *)vaddr0; 668 addroff = sizeof(sca_desc_t) * scp0->sp_ntxdesc; 669 670 /* 671 * point to the range following the tx descriptors, and 672 * set the rx descriptors there. 673 */ 674 scp0->sp_rxdesc_p = paddr0 + addroff; 675 scp0->sp_rxdesc = (sca_desc_t *)(vaddr0 + addroff); 676 addroff += sizeof(sca_desc_t) * scp0->sp_nrxdesc; 677 678 if (sc->sc_numports == 2) { 679 scp1->sp_txdesc_p = paddr0 + addroff; 680 scp1->sp_txdesc = (sca_desc_t *)(vaddr0 + addroff); 681 addroff += sizeof(sca_desc_t) * scp1->sp_ntxdesc; 682 683 scp1->sp_rxdesc_p = paddr0 + addroff; 684 scp1->sp_rxdesc = (sca_desc_t *)(vaddr0 + addroff); 685 addroff += sizeof(sca_desc_t) * scp1->sp_nrxdesc; 686 } 687 688 /* 689 * point to the memory following the descriptors, and set the 690 * transmit buffer there. 691 */ 692 scp0->sp_txbuf_p = paddr0 + addroff; 693 scp0->sp_txbuf = vaddr0 + addroff; 694 addroff += SCA_BSIZE * scp0->sp_ntxdesc; 695 696 /* 697 * lastly, skip over the transmit buffer and set up pointers into 698 * the receive buffer. 699 */ 700 scp0->sp_rxbuf_p = paddr0 + addroff; 701 scp0->sp_rxbuf = vaddr0 + addroff; 702 addroff += SCA_BSIZE * scp0->sp_nrxdesc; 703 704 if (sc->sc_numports == 2) { 705 scp1->sp_txbuf_p = paddr0 + addroff; 706 scp1->sp_txbuf = vaddr0 + addroff; 707 addroff += SCA_BSIZE * scp1->sp_ntxdesc; 708 709 scp1->sp_rxbuf_p = paddr0 + addroff; 710 scp1->sp_rxbuf = vaddr0 + addroff; 711 addroff += SCA_BSIZE * scp1->sp_nrxdesc; 712 } 713 714 /* 715 * as a consistancy check, addroff should be equal to the allocation 716 * size. 717 */ 718 if (sc->scu_allocsize != addroff) 719 printf("ERROR: scu_allocsize != addroff: %lu != %lu\n", 720 (u_long)sc->scu_allocsize, addroff); 721 } 722 723 #if __NetBSD_Version__ >= 104160000 724 static void 725 ntwoc_pci_config_interrupts(device_t self) 726 { 727 struct ntwoc_pci_softc *sc; 728 729 sc = device_private(self); 730 sca_get_base_clock(&sc->sc_sca); 731 sca_print_clock_info(&sc->sc_sca); 732 } 733 #endif 734