1 /* $NetBSD: cs4281.c,v 1.17 2004/04/23 21:13:06 itojun Exp $ */ 2 3 /* 4 * Copyright (c) 2000 Tatoku Ogaito. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Tatoku Ogaito 17 * for the NetBSD Project. 18 * 4. The name of the author may not be used to endorse or promote products 19 * derived from this software without specific prior written permission 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * Cirrus Logic CS4281 driver. 35 * Data sheets can be found 36 * http://www.cirrus.com/ftp/pub/4281.pdf 37 * ftp://ftp.alsa-project.org/pub/manuals/cirrus/cs4281tm.pdf 38 * 39 * TODO: 40 * 1: midi and FM support 41 * 2: ... 42 * 43 */ 44 45 #include <sys/cdefs.h> 46 __KERNEL_RCSID(0, "$NetBSD: cs4281.c,v 1.17 2004/04/23 21:13:06 itojun Exp $"); 47 48 #include <sys/param.h> 49 #include <sys/systm.h> 50 #include <sys/kernel.h> 51 #include <sys/malloc.h> 52 #include <sys/fcntl.h> 53 #include <sys/device.h> 54 #include <sys/systm.h> 55 56 #include <dev/pci/pcidevs.h> 57 #include <dev/pci/pcivar.h> 58 #include <dev/pci/cs4281reg.h> 59 #include <dev/pci/cs428xreg.h> 60 61 #include <sys/audioio.h> 62 #include <dev/audio_if.h> 63 #include <dev/midi_if.h> 64 #include <dev/mulaw.h> 65 #include <dev/auconv.h> 66 67 #include <dev/ic/ac97reg.h> 68 #include <dev/ic/ac97var.h> 69 70 #include <dev/pci/cs428x.h> 71 72 #include <machine/bus.h> 73 74 #if defined(ENABLE_SECONDARY_CODEC) 75 #define MAX_CHANNELS (4) 76 #define MAX_FIFO_SIZE 32 /* 128/4channels */ 77 #else 78 #define MAX_CHANNELS (2) 79 #define MAX_FIFO_SIZE 64 /* 128/2channels */ 80 #endif 81 82 /* IF functions for audio driver */ 83 int cs4281_match(struct device *, struct cfdata *, void *); 84 void cs4281_attach(struct device *, struct device *, void *); 85 int cs4281_intr(void *); 86 int cs4281_query_encoding(void *, struct audio_encoding *); 87 int cs4281_set_params(void *, int, int, struct audio_params *, struct audio_params *); 88 int cs4281_halt_output(void *); 89 int cs4281_halt_input(void *); 90 int cs4281_getdev(void *, struct audio_device *); 91 int cs4281_trigger_output(void *, void *, void *, int, void (*)(void *), 92 void *, struct audio_params *); 93 int cs4281_trigger_input(void *, void *, void *, int, void (*)(void *), 94 void *, struct audio_params *); 95 96 void cs4281_reset_codec(void *); 97 98 /* Internal functions */ 99 u_int8_t cs4281_sr2regval(int); 100 void cs4281_set_dac_rate(struct cs428x_softc *, int); 101 void cs4281_set_adc_rate(struct cs428x_softc *, int); 102 int cs4281_init(struct cs428x_softc *, int); 103 104 /* Power Management */ 105 void cs4281_power(int, void *); 106 107 struct audio_hw_if cs4281_hw_if = { 108 cs428x_open, 109 cs428x_close, 110 NULL, 111 cs4281_query_encoding, 112 cs4281_set_params, 113 cs428x_round_blocksize, 114 NULL, 115 NULL, 116 NULL, 117 NULL, 118 NULL, 119 cs4281_halt_output, 120 cs4281_halt_input, 121 NULL, 122 cs4281_getdev, 123 NULL, 124 cs428x_mixer_set_port, 125 cs428x_mixer_get_port, 126 cs428x_query_devinfo, 127 cs428x_malloc, 128 cs428x_free, 129 cs428x_round_buffersize, 130 cs428x_mappage, 131 cs428x_get_props, 132 cs4281_trigger_output, 133 cs4281_trigger_input, 134 NULL, 135 }; 136 137 #if NMIDI > 0 && 0 138 /* Midi Interface */ 139 void cs4281_midi_close(void*); 140 void cs4281_midi_getinfo(void *, struct midi_info *); 141 int cs4281_midi_open(void *, int, void (*)(void *, int), 142 void (*)(void *), void *); 143 int cs4281_midi_output(void *, int); 144 145 struct midi_hw_if cs4281_midi_hw_if = { 146 cs4281_midi_open, 147 cs4281_midi_close, 148 cs4281_midi_output, 149 cs4281_midi_getinfo, 150 0, 151 }; 152 #endif 153 154 CFATTACH_DECL(clct, sizeof(struct cs428x_softc), 155 cs4281_match, cs4281_attach, NULL, NULL); 156 157 struct audio_device cs4281_device = { 158 "CS4281", 159 "", 160 "cs4281" 161 }; 162 163 164 int 165 cs4281_match(parent, match, aux) 166 struct device *parent; 167 struct cfdata *match; 168 void *aux; 169 { 170 struct pci_attach_args *pa = (struct pci_attach_args *)aux; 171 172 if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_CIRRUS) 173 return 0; 174 if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_CIRRUS_CS4281) 175 return 1; 176 return 0; 177 } 178 179 void 180 cs4281_attach(parent, self, aux) 181 struct device *parent; 182 struct device *self; 183 void *aux; 184 { 185 struct cs428x_softc *sc = (struct cs428x_softc *)self; 186 struct pci_attach_args *pa = (struct pci_attach_args *)aux; 187 pci_chipset_tag_t pc = pa->pa_pc; 188 char const *intrstr; 189 pci_intr_handle_t ih; 190 pcireg_t reg; 191 char devinfo[256]; 192 int pci_pwrmgmt_cap_reg, pci_pwrmgmt_csr_reg; 193 194 aprint_naive(": Audio controller\n"); 195 196 pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo, sizeof(devinfo)); 197 aprint_normal(": %s (rev. 0x%02x)\n", devinfo, 198 PCI_REVISION(pa->pa_class)); 199 200 /* Map I/O register */ 201 if (pci_mapreg_map(pa, PCI_BA0, 202 PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0, 203 &sc->ba0t, &sc->ba0h, NULL, NULL)) { 204 aprint_error("%s: can't map BA0 space\n", sc->sc_dev.dv_xname); 205 return; 206 } 207 if (pci_mapreg_map(pa, PCI_BA1, 208 PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0, 209 &sc->ba1t, &sc->ba1h, NULL, NULL)) { 210 aprint_error("%s: can't map BA1 space\n", sc->sc_dev.dv_xname); 211 return; 212 } 213 214 sc->sc_dmatag = pa->pa_dmat; 215 216 /* 217 * Set Power State D0. 218 * Without do this, 0xffffffff is read from all registers after 219 * using Windows. 220 * On my IBM Thinkpad X20, it is set to D3 after using Windows2000. 221 */ 222 if (pci_get_capability(pa->pa_pc, pa->pa_tag, PCI_CAP_PWRMGMT, 223 &pci_pwrmgmt_cap_reg, 0)) { 224 225 pci_pwrmgmt_csr_reg = pci_pwrmgmt_cap_reg + PCI_PMCSR; 226 reg = pci_conf_read(pa->pa_pc, pa->pa_tag, 227 pci_pwrmgmt_csr_reg); 228 if ((reg & PCI_PMCSR_STATE_MASK) != PCI_PMCSR_STATE_D0) { 229 pci_conf_write(pc, pa->pa_tag, pci_pwrmgmt_csr_reg, 230 (reg & ~PCI_PMCSR_STATE_MASK) | 231 PCI_PMCSR_STATE_D0); 232 } 233 } 234 235 /* Enable the device (set bus master flag) */ 236 reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); 237 pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, 238 reg | PCI_COMMAND_MASTER_ENABLE); 239 240 #if 0 241 /* LATENCY_TIMER setting */ 242 temp1 = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG); 243 if (PCI_LATTIMER(temp1) < 32) { 244 temp1 &= 0xffff00ff; 245 temp1 |= 0x00002000; 246 pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG, temp1); 247 } 248 #endif 249 250 /* Map and establish the interrupt. */ 251 if (pci_intr_map(pa, &ih)) { 252 aprint_error("%s: couldn't map interrupt\n", 253 sc->sc_dev.dv_xname); 254 return; 255 } 256 intrstr = pci_intr_string(pc, ih); 257 258 sc->sc_ih = pci_intr_establish(pc, ih, IPL_AUDIO, cs4281_intr, sc); 259 if (sc->sc_ih == NULL) { 260 aprint_error("%s: couldn't establish interrupt", 261 sc->sc_dev.dv_xname); 262 if (intrstr != NULL) 263 aprint_normal(" at %s", intrstr); 264 aprint_normal("\n"); 265 return; 266 } 267 aprint_normal("%s: interrupting at %s\n", sc->sc_dev.dv_xname, intrstr); 268 269 /* 270 * Sound System start-up 271 */ 272 if (cs4281_init(sc, 1) != 0) 273 return; 274 275 sc->type = TYPE_CS4281; 276 sc->halt_input = cs4281_halt_input; 277 sc->halt_output = cs4281_halt_output; 278 279 sc->dma_size = CS4281_BUFFER_SIZE / MAX_CHANNELS; 280 sc->dma_align = 0x10; 281 sc->hw_blocksize = sc->dma_size / 2; 282 283 /* AC 97 attachment */ 284 sc->host_if.arg = sc; 285 sc->host_if.attach = cs428x_attach_codec; 286 sc->host_if.read = cs428x_read_codec; 287 sc->host_if.write = cs428x_write_codec; 288 sc->host_if.reset = cs4281_reset_codec; 289 if (ac97_attach(&sc->host_if) != 0) { 290 aprint_error("%s: ac97_attach failed\n", sc->sc_dev.dv_xname); 291 return; 292 } 293 audio_attach_mi(&cs4281_hw_if, sc, &sc->sc_dev); 294 295 #if NMIDI > 0 && 0 296 midi_attach_mi(&cs4281_midi_hw_if, sc, &sc->sc_dev); 297 #endif 298 299 sc->sc_suspend = PWR_RESUME; 300 sc->sc_powerhook = powerhook_establish(cs4281_power, sc); 301 } 302 303 int 304 cs4281_intr(p) 305 void *p; 306 { 307 struct cs428x_softc *sc = p; 308 u_int32_t intr, hdsr0, hdsr1; 309 char *empty_dma; 310 int handled = 0; 311 312 hdsr0 = 0; 313 hdsr1 = 0; 314 315 /* grab interrupt register */ 316 intr = BA0READ4(sc, CS4281_HISR); 317 318 DPRINTF(("cs4281_intr:")); 319 /* not for me */ 320 if ((intr & HISR_INTENA) == 0) { 321 /* clear the interrupt register */ 322 BA0WRITE4(sc, CS4281_HICR, HICR_CHGM | HICR_IEV); 323 return 0; 324 } 325 326 if (intr & HISR_DMA0) 327 hdsr0 = BA0READ4(sc, CS4281_HDSR0); /* clear intr condition */ 328 if (intr & HISR_DMA1) 329 hdsr1 = BA0READ4(sc, CS4281_HDSR1); /* clear intr condition */ 330 /* clear the interrupt register */ 331 BA0WRITE4(sc, CS4281_HICR, HICR_CHGM | HICR_IEV); 332 333 DPRINTF(("intr = 0x%08x, hdsr0 = 0x%08x hdsr1 = 0x%08x\n", 334 intr, hdsr0, hdsr1)); 335 336 /* Playback Interrupt */ 337 if (intr & HISR_DMA0) { 338 handled = 1; 339 DPRINTF((" PB DMA 0x%x(%d)", (int)BA0READ4(sc, CS4281_DCA0), 340 (int)BA0READ4(sc, CS4281_DCC0))); 341 if (sc->sc_pintr) { 342 if ((sc->sc_pi%sc->sc_pcount) == 0) 343 sc->sc_pintr(sc->sc_parg); 344 } else { 345 printf("unexpected play intr\n"); 346 } 347 /* copy buffer */ 348 ++sc->sc_pi; 349 empty_dma = sc->sc_pdma->addr; 350 if (sc->sc_pi&1) 351 empty_dma += sc->hw_blocksize; 352 memcpy(empty_dma, sc->sc_pn, sc->hw_blocksize); 353 sc->sc_pn += sc->hw_blocksize; 354 if (sc->sc_pn >= sc->sc_pe) 355 sc->sc_pn = sc->sc_ps; 356 } 357 if (intr & HISR_DMA1) { 358 handled = 1; 359 /* copy from DMA */ 360 DPRINTF((" CP DMA 0x%x(%d)", (int)BA0READ4(sc, CS4281_DCA1), 361 (int)BA0READ4(sc, CS4281_DCC1))); 362 ++sc->sc_ri; 363 empty_dma = sc->sc_rdma->addr; 364 if ((sc->sc_ri & 1) == 0) 365 empty_dma += sc->hw_blocksize; 366 memcpy(sc->sc_rn, empty_dma, sc->hw_blocksize); 367 if (sc->sc_rn >= sc->sc_re) 368 sc->sc_rn = sc->sc_rs; 369 if (sc->sc_rintr) { 370 if ((sc->sc_ri % sc->sc_rcount) == 0) 371 sc->sc_rintr(sc->sc_rarg); 372 } else { 373 printf("unexpected record intr\n"); 374 } 375 } 376 DPRINTF(("\n")); 377 378 return handled; 379 } 380 381 int 382 cs4281_query_encoding(addr, fp) 383 void *addr; 384 struct audio_encoding *fp; 385 { 386 387 switch (fp->index) { 388 case 0: 389 strcpy(fp->name, AudioEulinear); 390 fp->encoding = AUDIO_ENCODING_ULINEAR; 391 fp->precision = 8; 392 fp->flags = 0; 393 break; 394 case 1: 395 strcpy(fp->name, AudioEmulaw); 396 fp->encoding = AUDIO_ENCODING_ULAW; 397 fp->precision = 8; 398 fp->flags = AUDIO_ENCODINGFLAG_EMULATED; 399 break; 400 case 2: 401 strcpy(fp->name, AudioEalaw); 402 fp->encoding = AUDIO_ENCODING_ALAW; 403 fp->precision = 8; 404 fp->flags = AUDIO_ENCODINGFLAG_EMULATED; 405 break; 406 case 3: 407 strcpy(fp->name, AudioEslinear); 408 fp->encoding = AUDIO_ENCODING_SLINEAR; 409 fp->precision = 8; 410 fp->flags = 0; 411 break; 412 case 4: 413 strcpy(fp->name, AudioEslinear_le); 414 fp->encoding = AUDIO_ENCODING_SLINEAR_LE; 415 fp->precision = 16; 416 fp->flags = 0; 417 break; 418 case 5: 419 strcpy(fp->name, AudioEulinear_le); 420 fp->encoding = AUDIO_ENCODING_ULINEAR_LE; 421 fp->precision = 16; 422 fp->flags = 0; 423 break; 424 case 6: 425 strcpy(fp->name, AudioEslinear_be); 426 fp->encoding = AUDIO_ENCODING_SLINEAR_BE; 427 fp->precision = 16; 428 fp->flags = 0; 429 break; 430 case 7: 431 strcpy(fp->name, AudioEulinear_be); 432 fp->encoding = AUDIO_ENCODING_ULINEAR_BE; 433 fp->precision = 16; 434 fp->flags = 0; 435 break; 436 default: 437 return EINVAL; 438 } 439 return 0; 440 } 441 442 int 443 cs4281_set_params(addr, setmode, usemode, play, rec) 444 void *addr; 445 int setmode, usemode; 446 struct audio_params *play, *rec; 447 { 448 struct cs428x_softc *sc = addr; 449 struct audio_params *p; 450 int mode; 451 452 for (mode = AUMODE_RECORD; mode != -1; 453 mode = mode == AUMODE_RECORD ? AUMODE_PLAY : -1) { 454 if ((setmode & mode) == 0) 455 continue; 456 457 p = mode == AUMODE_PLAY ? play : rec; 458 459 if (p == play) { 460 DPRINTFN(5, ("play: sample=%ld precision=%d channels=%d\n", 461 p->sample_rate, p->precision, p->channels)); 462 if (p->sample_rate < 6023 || p->sample_rate > 48000 || 463 (p->precision != 8 && p->precision != 16) || 464 (p->channels != 1 && p->channels != 2)) { 465 return (EINVAL); 466 } 467 } else { 468 DPRINTFN(5, ("rec: sample=%ld precision=%d channels=%d\n", 469 p->sample_rate, p->precision, p->channels)); 470 if (p->sample_rate < 6023 || p->sample_rate > 48000 || 471 (p->precision != 8 && p->precision != 16) || 472 (p->channels != 1 && p->channels != 2)) { 473 return (EINVAL); 474 } 475 } 476 p->factor = 1; 477 p->sw_code = 0; 478 479 switch (p->encoding) { 480 case AUDIO_ENCODING_SLINEAR_BE: 481 break; 482 case AUDIO_ENCODING_SLINEAR_LE: 483 break; 484 case AUDIO_ENCODING_ULINEAR_BE: 485 break; 486 case AUDIO_ENCODING_ULINEAR_LE: 487 break; 488 case AUDIO_ENCODING_ULAW: 489 if (mode == AUMODE_PLAY) { 490 p->sw_code = mulaw_to_slinear8; 491 } else { 492 p->sw_code = slinear8_to_mulaw; 493 } 494 break; 495 case AUDIO_ENCODING_ALAW: 496 if (mode == AUMODE_PLAY) { 497 p->sw_code = alaw_to_slinear8; 498 } else { 499 p->sw_code = slinear8_to_alaw; 500 } 501 break; 502 default: 503 return (EINVAL); 504 } 505 } 506 507 /* set sample rate */ 508 cs4281_set_dac_rate(sc, play->sample_rate); 509 cs4281_set_adc_rate(sc, rec->sample_rate); 510 return 0; 511 } 512 513 int 514 cs4281_halt_output(addr) 515 void *addr; 516 { 517 struct cs428x_softc *sc = addr; 518 519 BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK); 520 sc->sc_prun = 0; 521 return 0; 522 } 523 524 int 525 cs4281_halt_input(addr) 526 void *addr; 527 { 528 struct cs428x_softc *sc = addr; 529 530 BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK); 531 sc->sc_rrun = 0; 532 return 0; 533 } 534 535 int 536 cs4281_getdev(addr, retp) 537 void *addr; 538 struct audio_device *retp; 539 { 540 541 *retp = cs4281_device; 542 return 0; 543 } 544 545 int 546 cs4281_trigger_output(addr, start, end, blksize, intr, arg, param) 547 void *addr; 548 void *start, *end; 549 int blksize; 550 void (*intr) __P((void *)); 551 void *arg; 552 struct audio_params *param; 553 { 554 struct cs428x_softc *sc = addr; 555 u_int32_t fmt=0; 556 struct cs428x_dma *p; 557 int dma_count; 558 559 #ifdef DIAGNOSTIC 560 if (sc->sc_prun) 561 printf("cs4281_trigger_output: already running\n"); 562 #endif 563 sc->sc_prun = 1; 564 565 DPRINTF(("cs4281_trigger_output: sc=%p start=%p end=%p " 566 "blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg)); 567 sc->sc_pintr = intr; 568 sc->sc_parg = arg; 569 570 /* stop playback DMA */ 571 BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK); 572 573 DPRINTF(("param: precision=%d factor=%d channels=%d encoding=%d\n", 574 param->precision, param->factor, param->channels, 575 param->encoding)); 576 for (p = sc->sc_dmas; p != NULL && BUFADDR(p) != start; p = p->next) 577 ; 578 if (p == NULL) { 579 printf("cs4281_trigger_output: bad addr %p\n", start); 580 return (EINVAL); 581 } 582 583 sc->sc_pcount = blksize / sc->hw_blocksize; 584 sc->sc_ps = (char *)start; 585 sc->sc_pe = (char *)end; 586 sc->sc_pdma = p; 587 sc->sc_pbuf = KERNADDR(p); 588 sc->sc_pi = 0; 589 sc->sc_pn = sc->sc_ps; 590 if (blksize >= sc->dma_size) { 591 sc->sc_pn = sc->sc_ps + sc->dma_size; 592 memcpy(sc->sc_pbuf, start, sc->dma_size); 593 ++sc->sc_pi; 594 } else { 595 sc->sc_pn = sc->sc_ps + sc->hw_blocksize; 596 memcpy(sc->sc_pbuf, start, sc->hw_blocksize); 597 } 598 599 dma_count = sc->dma_size; 600 if (param->precision * param->factor != 8) 601 dma_count /= 2; /* 16 bit */ 602 if (param->channels > 1) 603 dma_count /= 2; /* Stereo */ 604 605 DPRINTF(("cs4281_trigger_output: DMAADDR(p)=0x%x count=%d\n", 606 (int)DMAADDR(p), dma_count)); 607 BA0WRITE4(sc, CS4281_DBA0, DMAADDR(p)); 608 BA0WRITE4(sc, CS4281_DBC0, dma_count-1); 609 610 /* set playback format */ 611 fmt = BA0READ4(sc, CS4281_DMR0) & ~DMRn_FMTMSK; 612 if (param->precision * param->factor == 8) 613 fmt |= DMRn_SIZE8; 614 if (param->channels == 1) 615 fmt |= DMRn_MONO; 616 if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || 617 param->encoding == AUDIO_ENCODING_SLINEAR_BE) 618 fmt |= DMRn_BEND; 619 if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || 620 param->encoding == AUDIO_ENCODING_ULINEAR_LE) 621 fmt |= DMRn_USIGN; 622 BA0WRITE4(sc, CS4281_DMR0, fmt); 623 624 /* set sample rate */ 625 sc->sc_prate = param->sample_rate; 626 cs4281_set_dac_rate(sc, param->sample_rate); 627 628 /* start DMA */ 629 BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) & ~DCRn_MSK); 630 /* Enable interrupts */ 631 BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); 632 633 DPRINTF(("HICR =0x%08x(expected 0x00000001)\n", BA0READ4(sc, CS4281_HICR))); 634 DPRINTF(("HIMR =0x%08x(expected 0x00f0fc3f)\n", BA0READ4(sc, CS4281_HIMR))); 635 DPRINTF(("DMR0 =0x%08x(expected 0x2???0018)\n", BA0READ4(sc, CS4281_DMR0))); 636 DPRINTF(("DCR0 =0x%08x(expected 0x00030000)\n", BA0READ4(sc, CS4281_DCR0))); 637 DPRINTF(("FCR0 =0x%08x(expected 0x81000f00)\n", BA0READ4(sc, CS4281_FCR0))); 638 DPRINTF(("DACSR=0x%08x(expected 1 for 44kHz 5 for 8kHz)\n", 639 BA0READ4(sc, CS4281_DACSR))); 640 DPRINTF(("SRCSA=0x%08x(expected 0x0b0a0100)\n", BA0READ4(sc, CS4281_SRCSA))); 641 DPRINTF(("SSPM&SSPM_PSRCEN =0x%08x(expected 0x00000010)\n", 642 BA0READ4(sc, CS4281_SSPM) & SSPM_PSRCEN)); 643 644 return 0; 645 } 646 647 int 648 cs4281_trigger_input(addr, start, end, blksize, intr, arg, param) 649 void *addr; 650 void *start, *end; 651 int blksize; 652 void (*intr) __P((void *)); 653 void *arg; 654 struct audio_params *param; 655 { 656 struct cs428x_softc *sc = addr; 657 struct cs428x_dma *p; 658 u_int32_t fmt=0; 659 int dma_count; 660 661 #ifdef DIAGNOSTIC 662 if (sc->sc_rrun) 663 printf("cs4281_trigger_input: already running\n"); 664 #endif 665 sc->sc_rrun = 1; 666 DPRINTF(("cs4281_trigger_input: sc=%p start=%p end=%p " 667 "blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg)); 668 sc->sc_rintr = intr; 669 sc->sc_rarg = arg; 670 671 /* stop recording DMA */ 672 BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK); 673 674 for (p = sc->sc_dmas; p && BUFADDR(p) != start; p = p->next) 675 ; 676 if (!p) { 677 printf("cs4281_trigger_input: bad addr %p\n", start); 678 return (EINVAL); 679 } 680 681 sc->sc_rcount = blksize / sc->hw_blocksize; 682 sc->sc_rs = (char *)start; 683 sc->sc_re = (char *)end; 684 sc->sc_rdma = p; 685 sc->sc_rbuf = KERNADDR(p); 686 sc->sc_ri = 0; 687 sc->sc_rn = sc->sc_rs; 688 689 dma_count = sc->dma_size; 690 if (param->precision * param->factor == 8) 691 dma_count /= 2; 692 if (param->channels > 1) 693 dma_count /= 2; 694 695 DPRINTF(("cs4281_trigger_input: DMAADDR(p)=0x%x count=%d\n", 696 (int)DMAADDR(p), dma_count)); 697 BA0WRITE4(sc, CS4281_DBA1, DMAADDR(p)); 698 BA0WRITE4(sc, CS4281_DBC1, dma_count-1); 699 700 /* set recording format */ 701 fmt = BA0READ4(sc, CS4281_DMR1) & ~DMRn_FMTMSK; 702 if (param->precision * param->factor == 8) 703 fmt |= DMRn_SIZE8; 704 if (param->channels == 1) 705 fmt |= DMRn_MONO; 706 if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || 707 param->encoding == AUDIO_ENCODING_SLINEAR_BE) 708 fmt |= DMRn_BEND; 709 if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || 710 param->encoding == AUDIO_ENCODING_ULINEAR_LE) 711 fmt |= DMRn_USIGN; 712 BA0WRITE4(sc, CS4281_DMR1, fmt); 713 714 /* set sample rate */ 715 sc->sc_rrate = param->sample_rate; 716 cs4281_set_adc_rate(sc, param->sample_rate); 717 718 /* Start DMA */ 719 BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) & ~DCRn_MSK); 720 /* Enable interrupts */ 721 BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); 722 723 DPRINTF(("HICR=0x%08x\n", BA0READ4(sc, CS4281_HICR))); 724 DPRINTF(("HIMR=0x%08x\n", BA0READ4(sc, CS4281_HIMR))); 725 DPRINTF(("DMR1=0x%08x\n", BA0READ4(sc, CS4281_DMR1))); 726 DPRINTF(("DCR1=0x%08x\n", BA0READ4(sc, CS4281_DCR1))); 727 728 return 0; 729 } 730 731 /* Power Hook */ 732 void 733 cs4281_power(why, v) 734 int why; 735 void *v; 736 { 737 struct cs428x_softc *sc = (struct cs428x_softc *)v; 738 static u_int32_t dba0 = 0, dbc0 = 0, dmr0 = 0, dcr0 = 0; 739 static u_int32_t dba1 = 0, dbc1 = 0, dmr1 = 0, dcr1 = 0; 740 741 DPRINTF(("%s: cs4281_power why=%d\n", sc->sc_dev.dv_xname, why)); 742 switch (why) { 743 case PWR_SUSPEND: 744 case PWR_STANDBY: 745 sc->sc_suspend = why; 746 747 /* save current playback status */ 748 if (sc->sc_prun) { 749 dcr0 = BA0READ4(sc, CS4281_DCR0); 750 dmr0 = BA0READ4(sc, CS4281_DMR0); 751 dbc0 = BA0READ4(sc, CS4281_DBC0); 752 dba0 = BA0READ4(sc, CS4281_DBA0); 753 } 754 755 /* save current capture status */ 756 if (sc->sc_rrun) { 757 dcr1 = BA0READ4(sc, CS4281_DCR1); 758 dmr1 = BA0READ4(sc, CS4281_DMR1); 759 dbc1 = BA0READ4(sc, CS4281_DBC1); 760 dba1 = BA0READ4(sc, CS4281_DBA1); 761 } 762 /* Stop DMA */ 763 BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK); 764 BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK); 765 break; 766 case PWR_RESUME: 767 if (sc->sc_suspend == PWR_RESUME) { 768 printf("cs4281_power: odd, resume without suspend.\n"); 769 sc->sc_suspend = why; 770 return; 771 } 772 sc->sc_suspend = why; 773 cs4281_init(sc, 0); 774 cs4281_reset_codec(sc); 775 776 /* restore ac97 registers */ 777 (*sc->codec_if->vtbl->restore_ports)(sc->codec_if); 778 779 /* restore DMA related status */ 780 if (sc->sc_prun) { 781 cs4281_set_dac_rate(sc, sc->sc_prate); 782 BA0WRITE4(sc, CS4281_DBA0, dba0); 783 BA0WRITE4(sc, CS4281_DBC0, dbc0); 784 BA0WRITE4(sc, CS4281_DMR0, dmr0); 785 BA0WRITE4(sc, CS4281_DCR0, dcr0); 786 } 787 if (sc->sc_rrun) { 788 cs4281_set_adc_rate(sc, sc->sc_rrate); 789 BA0WRITE4(sc, CS4281_DBA1, dba1); 790 BA0WRITE4(sc, CS4281_DBC1, dbc1); 791 BA0WRITE4(sc, CS4281_DMR1, dmr1); 792 BA0WRITE4(sc, CS4281_DCR1, dcr1); 793 } 794 /* enable intterupts */ 795 if (sc->sc_prun || sc->sc_rrun) 796 BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); 797 break; 798 case PWR_SOFTSUSPEND: 799 case PWR_SOFTSTANDBY: 800 case PWR_SOFTRESUME: 801 break; 802 } 803 } 804 805 /* control AC97 codec */ 806 void 807 cs4281_reset_codec(void *addr) 808 { 809 struct cs428x_softc *sc; 810 u_int16_t data; 811 u_int32_t dat32; 812 int n; 813 814 sc = addr; 815 816 DPRINTFN(3, ("cs4281_reset_codec\n")); 817 818 /* Reset codec */ 819 BA0WRITE4(sc, CS428X_ACCTL, 0); 820 delay(50); /* delay 50us */ 821 822 BA0WRITE4(sc, CS4281_SPMC, 0); 823 delay(100); /* delay 100us */ 824 BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN); 825 #if defined(ENABLE_SECONDARY_CODEC) 826 BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E); 827 BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID); 828 #endif 829 delay(50000); /* XXX: delay 50ms */ 830 831 /* Enable ASYNC generation */ 832 BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN); 833 834 /* Wait for codec ready. Linux driver waits 50ms here */ 835 n = 0; 836 while ((BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY) == 0) { 837 delay(100); 838 if (++n > 1000) { 839 printf("reset_codec: AC97 codec ready timeout\n"); 840 return; 841 } 842 } 843 #if defined(ENABLE_SECONDARY_CODEC) 844 /* secondary codec ready*/ 845 n = 0; 846 while ((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) { 847 delay(100); 848 if (++n > 1000) 849 return; 850 } 851 #endif 852 /* Set the serial timing configuration */ 853 /* XXX: undocumented but the Linux driver do this */ 854 BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); 855 856 /* Wait for codec ready signal */ 857 n = 0; 858 do { 859 delay(1000); 860 if (++n > 1000) { 861 printf("%s: timeout waiting for codec ready\n", 862 sc->sc_dev.dv_xname); 863 return; 864 } 865 dat32 = BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY; 866 } while (dat32 == 0); 867 868 /* Enable Valid Frame output on ASDOUT */ 869 BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN | ACCTL_VFRM); 870 871 /* Wait until codec calibration is finished. Codec register 26h */ 872 n = 0; 873 do { 874 delay(1); 875 if (++n > 1000) { 876 printf("%s: timeout waiting for codec calibration\n", 877 sc->sc_dev.dv_xname); 878 return ; 879 } 880 cs428x_read_codec(sc, AC97_REG_POWER, &data); 881 } while ((data & 0x0f) != 0x0f); 882 883 /* Set the serial timing configuration again */ 884 /* XXX: undocumented but the Linux driver do this */ 885 BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); 886 887 /* Wait until we've sampled input slots 3 & 4 as valid */ 888 n = 0; 889 do { 890 delay(1000); 891 if (++n > 1000) { 892 printf("%s: timeout waiting for sampled input slots as valid\n", 893 sc->sc_dev.dv_xname); 894 return; 895 } 896 dat32 = BA0READ4(sc, CS428X_ACISV) & (ACISV_ISV3 | ACISV_ISV4) ; 897 } while (dat32 != (ACISV_ISV3 | ACISV_ISV4)); 898 899 /* Start digital data transfer of audio data to the codec */ 900 BA0WRITE4(sc, CS428X_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4)); 901 } 902 903 904 /* Internal functions */ 905 906 /* convert sample rate to register value */ 907 u_int8_t 908 cs4281_sr2regval(rate) 909 int rate; 910 { 911 u_int8_t retval; 912 913 /* We don't have to change here. but anyway ... */ 914 if (rate > 48000) 915 rate = 48000; 916 if (rate < 6023) 917 rate = 6023; 918 919 switch (rate) { 920 case 8000: 921 retval = 5; 922 break; 923 case 11025: 924 retval = 4; 925 break; 926 case 16000: 927 retval = 3; 928 break; 929 case 22050: 930 retval = 2; 931 break; 932 case 44100: 933 retval = 1; 934 break; 935 case 48000: 936 retval = 0; 937 break; 938 default: 939 retval = 1536000/rate; /* == 24576000/(rate*16) */ 940 } 941 return retval; 942 } 943 944 void 945 cs4281_set_adc_rate(sc, rate) 946 struct cs428x_softc *sc; 947 int rate; 948 { 949 950 BA0WRITE4(sc, CS4281_ADCSR, cs4281_sr2regval(rate)); 951 } 952 953 void 954 cs4281_set_dac_rate(sc, rate) 955 struct cs428x_softc *sc; 956 int rate; 957 { 958 959 BA0WRITE4(sc, CS4281_DACSR, cs4281_sr2regval(rate)); 960 } 961 962 int 963 cs4281_init(sc, init) 964 struct cs428x_softc *sc; 965 int init; 966 { 967 int n; 968 u_int16_t data; 969 u_int32_t dat32; 970 971 /* set "Configuration Write Protect" register to 972 * 0x4281 to allow to write */ 973 BA0WRITE4(sc, CS4281_CWPR, 0x4281); 974 975 /* 976 * Unset "Full Power-Down bit of Extended PCI Power Management 977 * Control" register to release the reset state. 978 */ 979 dat32 = BA0READ4(sc, CS4281_EPPMC); 980 if (dat32 & EPPMC_FPDN) { 981 BA0WRITE4(sc, CS4281_EPPMC, dat32 & ~EPPMC_FPDN); 982 } 983 984 /* Start PLL out in known state */ 985 BA0WRITE4(sc, CS4281_CLKCR1, 0); 986 /* Start serial ports out in known state */ 987 BA0WRITE4(sc, CS4281_SERMC, 0); 988 989 /* Reset codec */ 990 BA0WRITE4(sc, CS428X_ACCTL, 0); 991 delay(50); /* delay 50us */ 992 993 BA0WRITE4(sc, CS4281_SPMC, 0); 994 delay(100); /* delay 100us */ 995 BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN); 996 #if defined(ENABLE_SECONDARY_CODEC) 997 BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E); 998 BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID); 999 #endif 1000 delay(50000); /* XXX: delay 50ms */ 1001 1002 /* Turn on Sound System clocks based on ABITCLK */ 1003 BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_DLLP); 1004 delay(50000); /* XXX: delay 50ms */ 1005 BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_SWCE | CLKCR1_DLLP); 1006 1007 /* Set enables for sections that are needed in the SSPM registers */ 1008 BA0WRITE4(sc, CS4281_SSPM, 1009 SSPM_MIXEN | /* Mixer */ 1010 SSPM_CSRCEN | /* Capture SRC */ 1011 SSPM_PSRCEN | /* Playback SRC */ 1012 SSPM_JSEN | /* Joystick */ 1013 SSPM_ACLEN | /* AC LINK */ 1014 SSPM_FMEN /* FM */ 1015 ); 1016 1017 /* Wait for clock stabilization */ 1018 n = 0; 1019 #if 1 1020 /* what document says */ 1021 while ((BA0READ4(sc, CS4281_CLKCR1)& (CLKCR1_DLLRDY | CLKCR1_CLKON)) 1022 != (CLKCR1_DLLRDY | CLKCR1_CLKON)) { 1023 delay(100); 1024 if (++n > 1000) { 1025 printf("%s: timeout waiting for clock stabilization\n", 1026 sc->sc_dev.dv_xname); 1027 return -1; 1028 } 1029 } 1030 #else 1031 /* Cirrus driver for Linux does */ 1032 while (!(BA0READ4(sc, CS4281_CLKCR1) & CLKCR1_DLLRDY)) { 1033 delay(1000); 1034 if (++n > 1000) { 1035 printf("%s: timeout waiting for clock stabilization\n", 1036 sc->sc_dev.dv_xname); 1037 return -1; 1038 } 1039 } 1040 #endif 1041 1042 /* Enable ASYNC generation */ 1043 BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN); 1044 1045 /* Wait for codec ready. Linux driver waits 50ms here */ 1046 n = 0; 1047 while ((BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY) == 0) { 1048 delay(100); 1049 if (++n > 1000) { 1050 printf("%s: timeout waiting for codec ready\n", 1051 sc->sc_dev.dv_xname); 1052 return -1; 1053 } 1054 } 1055 1056 #if defined(ENABLE_SECONDARY_CODEC) 1057 /* secondary codec ready*/ 1058 n = 0; 1059 while ((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) { 1060 delay(100); 1061 if (++n > 1000) { 1062 printf("%s: timeout waiting for secondary codec ready\n", 1063 sc->sc_dev.dv_xname); 1064 return -1; 1065 } 1066 } 1067 #endif 1068 1069 /* Set the serial timing configuration */ 1070 /* XXX: undocumented but the Linux driver do this */ 1071 BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); 1072 1073 /* Wait for codec ready signal */ 1074 n = 0; 1075 do { 1076 delay(1000); 1077 if (++n > 1000) { 1078 printf("%s: timeout waiting for codec ready\n", 1079 sc->sc_dev.dv_xname); 1080 return -1; 1081 } 1082 dat32 = BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY; 1083 } while (dat32 == 0); 1084 1085 /* Enable Valid Frame output on ASDOUT */ 1086 BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN | ACCTL_VFRM); 1087 1088 /* Wait until codec calibration is finished. codec register 26h */ 1089 n = 0; 1090 do { 1091 delay(1); 1092 if (++n > 1000) { 1093 printf("%s: timeout waiting for codec calibration\n", 1094 sc->sc_dev.dv_xname); 1095 return -1; 1096 } 1097 cs428x_read_codec(sc, AC97_REG_POWER, &data); 1098 } while ((data & 0x0f) != 0x0f); 1099 1100 /* Set the serial timing configuration again */ 1101 /* XXX: undocumented but the Linux driver do this */ 1102 BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); 1103 1104 /* Wait until we've sampled input slots 3 & 4 as valid */ 1105 n = 0; 1106 do { 1107 delay(1000); 1108 if (++n > 1000) { 1109 printf("%s: timeout waiting for sampled input slots as valid\n", 1110 sc->sc_dev.dv_xname); 1111 return -1; 1112 } 1113 dat32 = BA0READ4(sc, CS428X_ACISV) & (ACISV_ISV3 | ACISV_ISV4); 1114 } while (dat32 != (ACISV_ISV3 | ACISV_ISV4)); 1115 1116 /* Start digital data transfer of audio data to the codec */ 1117 BA0WRITE4(sc, CS428X_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4)); 1118 1119 cs428x_write_codec(sc, AC97_REG_HEADPHONE_VOLUME, 0); 1120 cs428x_write_codec(sc, AC97_REG_MASTER_VOLUME, 0); 1121 1122 /* Power on the DAC */ 1123 cs428x_read_codec(sc, AC97_REG_POWER, &data); 1124 cs428x_write_codec(sc, AC97_REG_POWER, data & 0xfdff); 1125 1126 /* Wait until we sample a DAC ready state. 1127 * Not documented, but Linux driver does. 1128 */ 1129 for (n = 0; n < 32; ++n) { 1130 delay(1000); 1131 cs428x_read_codec(sc, AC97_REG_POWER, &data); 1132 if (data & 0x02) 1133 break; 1134 } 1135 1136 /* Power on the ADC */ 1137 cs428x_read_codec(sc, AC97_REG_POWER, &data); 1138 cs428x_write_codec(sc, AC97_REG_POWER, data & 0xfeff); 1139 1140 /* Wait until we sample ADC ready state. 1141 * Not documented, but Linux driver does. 1142 */ 1143 for (n = 0; n < 32; ++n) { 1144 delay(1000); 1145 cs428x_read_codec(sc, AC97_REG_POWER, &data); 1146 if (data & 0x01) 1147 break; 1148 } 1149 1150 #if 0 1151 /* Initialize AC-Link features */ 1152 /* variable sample-rate support */ 1153 mem = BA0READ4(sc, CS4281_SERMC); 1154 mem |= (SERMC_ODSEN1 | SERMC_ODSEN2); 1155 BA0WRITE4(sc, CS4281_SERMC, mem); 1156 /* XXX: more... */ 1157 1158 /* Initialize SSCR register features */ 1159 /* XXX: hardware volume setting */ 1160 BA0WRITE4(sc, CS4281_SSCR, ~SSCR_HVC); /* disable HW volume setting */ 1161 #endif 1162 1163 /* disable Sound Blaster Pro emulation */ 1164 /* XXX: 1165 * Cannot set since the documents does not describe which bit is 1166 * correspond to SSCR_SB. Since the reset value of SSCR is 0, 1167 * we can ignore it.*/ 1168 #if 0 1169 BA0WRITE4(sc, CS4281_SSCR, SSCR_SB); 1170 #endif 1171 1172 /* map AC97 PCM playback to DMA Channel 0 */ 1173 /* Reset FEN bit to setup first */ 1174 BA0WRITE4(sc, CS4281_FCR0, (BA0READ4(sc, CS4281_FCR0) & ~FCRn_FEN)); 1175 /* 1176 *| RS[4:0]/| | 1177 *| LS[4:0] | AC97 | Slot Function 1178 *|---------+--------+-------------------- 1179 *| 0 | 3 | Left PCM Playback 1180 *| 1 | 4 | Right PCM Playback 1181 *| 2 | 5 | Phone Line 1 DAC 1182 *| 3 | 6 | Center PCM Playback 1183 *.... 1184 * quoted from Table 29(p109) 1185 */ 1186 dat32 = 0x01 << 24 | /* RS[4:0] = 1 see above */ 1187 0x00 << 16 | /* LS[4:0] = 0 see above */ 1188 0x0f << 8 | /* SZ[6:0] = 15 size of buffer */ 1189 0x00 << 0 ; /* OF[6:0] = 0 offset */ 1190 BA0WRITE4(sc, CS4281_FCR0, dat32); 1191 BA0WRITE4(sc, CS4281_FCR0, dat32 | FCRn_FEN); 1192 1193 /* map AC97 PCM record to DMA Channel 1 */ 1194 /* Reset FEN bit to setup first */ 1195 BA0WRITE4(sc, CS4281_FCR1, (BA0READ4(sc, CS4281_FCR1) & ~FCRn_FEN)); 1196 /* 1197 *| RS[4:0]/| 1198 *| LS[4:0] | AC97 | Slot Function 1199 *|---------+------+------------------- 1200 *| 10 | 3 | Left PCM Record 1201 *| 11 | 4 | Right PCM Record 1202 *| 12 | 5 | Phone Line 1 ADC 1203 *| 13 | 6 | Mic ADC 1204 *.... 1205 * quoted from Table 30(p109) 1206 */ 1207 dat32 = 0x0b << 24 | /* RS[4:0] = 11 See above */ 1208 0x0a << 16 | /* LS[4:0] = 10 See above */ 1209 0x0f << 8 | /* SZ[6:0] = 15 Size of buffer */ 1210 0x10 << 0 ; /* OF[6:0] = 16 offset */ 1211 1212 /* XXX: I cannot understand why FCRn_PSH is needed here. */ 1213 BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_PSH); 1214 BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_FEN); 1215 1216 #if 0 1217 /* Disable DMA Channel 2, 3 */ 1218 BA0WRITE4(sc, CS4281_FCR2, (BA0READ4(sc, CS4281_FCR2) & ~FCRn_FEN)); 1219 BA0WRITE4(sc, CS4281_FCR3, (BA0READ4(sc, CS4281_FCR3) & ~FCRn_FEN)); 1220 #endif 1221 1222 /* Set the SRC Slot Assignment accordingly */ 1223 /*| PLSS[4:0]/ 1224 *| PRSS[4:0] | AC97 | Slot Function 1225 *|-----------+------+---------------- 1226 *| 0 | 3 | Left PCM Playback 1227 *| 1 | 4 | Right PCM Playback 1228 *| 2 | 5 | phone line 1 DAC 1229 *| 3 | 6 | Center PCM Playback 1230 *| 4 | 7 | Left Surround PCM Playback 1231 *| 5 | 8 | Right Surround PCM Playback 1232 *...... 1233 * 1234 *| CLSS[4:0]/ 1235 *| CRSS[4:0] | AC97 | Codec |Slot Function 1236 *|-----------+------+-------+----------------- 1237 *| 10 | 3 |Primary| Left PCM Record 1238 *| 11 | 4 |Primary| Right PCM Record 1239 *| 12 | 5 |Primary| Phone Line 1 ADC 1240 *| 13 | 6 |Primary| Mic ADC 1241 *|..... 1242 *| 20 | 3 | Sec. | Left PCM Record 1243 *| 21 | 4 | Sec. | Right PCM Record 1244 *| 22 | 5 | Sec. | Phone Line 1 ADC 1245 *| 23 | 6 | Sec. | Mic ADC 1246 */ 1247 dat32 = 0x0b << 24 | /* CRSS[4:0] Right PCM Record(primary) */ 1248 0x0a << 16 | /* CLSS[4:0] Left PCM Record(primary) */ 1249 0x01 << 8 | /* PRSS[4:0] Right PCM Playback */ 1250 0x00 << 0; /* PLSS[4:0] Left PCM Playback */ 1251 BA0WRITE4(sc, CS4281_SRCSA, dat32); 1252 1253 /* Set interrupt to occurred at Half and Full terminal 1254 * count interrupt enable for DMA channel 0 and 1. 1255 * To keep DMA stop, set MSK. 1256 */ 1257 dat32 = DCRn_HTCIE | DCRn_TCIE | DCRn_MSK; 1258 BA0WRITE4(sc, CS4281_DCR0, dat32); 1259 BA0WRITE4(sc, CS4281_DCR1, dat32); 1260 1261 /* Set Auto-Initialize Contorl enable */ 1262 BA0WRITE4(sc, CS4281_DMR0, 1263 DMRn_DMA | DMRn_AUTO | DMRn_TR_READ); 1264 BA0WRITE4(sc, CS4281_DMR1, 1265 DMRn_DMA | DMRn_AUTO | DMRn_TR_WRITE); 1266 1267 /* Clear DMA Mask in HIMR */ 1268 dat32 = ~HIMR_DMAIM & ~HIMR_D1IM & ~HIMR_D0IM; 1269 BA0WRITE4(sc, CS4281_HIMR, 1270 BA0READ4(sc, CS4281_HIMR) & dat32); 1271 1272 /* set current status */ 1273 if (init != 0) { 1274 sc->sc_prun = 0; 1275 sc->sc_rrun = 0; 1276 } 1277 1278 /* setup playback volume */ 1279 BA0WRITE4(sc, CS4281_PPRVC, 7); 1280 BA0WRITE4(sc, CS4281_PPLVC, 7); 1281 1282 return 0; 1283 } 1284