1 /* $NetBSD: cs4281.c,v 1.7 2001/11/13 07:48:41 lukem Exp $ */ 2 3 /* 4 * Copyright (c) 2000 Tatoku Ogaito. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by Tatoku Ogaito 17 * for the NetBSD Project. 18 * 4. The name of the author may not be used to endorse or promote products 19 * derived from this software without specific prior written permission 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * Cirrus Logic CS4281 driver. 35 * Data sheets can be found 36 * http://www.cirrus.com/ftp/pub/4281.pdf 37 * ftp://ftp.alsa-project.org/pub/manuals/cirrus/cs4281tm.pdf 38 * 39 * TODO: 40 * 1: midi and FM support 41 * 2: ... 42 * 43 */ 44 45 #include <sys/cdefs.h> 46 __KERNEL_RCSID(0, "$NetBSD: cs4281.c,v 1.7 2001/11/13 07:48:41 lukem Exp $"); 47 48 #include <sys/param.h> 49 #include <sys/systm.h> 50 #include <sys/kernel.h> 51 #include <sys/malloc.h> 52 #include <sys/fcntl.h> 53 #include <sys/device.h> 54 #include <sys/types.h> 55 #include <sys/systm.h> 56 57 #include <dev/pci/pcidevs.h> 58 #include <dev/pci/pcivar.h> 59 #include <dev/pci/cs4281reg.h> 60 #include <dev/pci/cs428xreg.h> 61 62 #include <sys/audioio.h> 63 #include <dev/audio_if.h> 64 #include <dev/midi_if.h> 65 #include <dev/mulaw.h> 66 #include <dev/auconv.h> 67 68 #include <dev/ic/ac97reg.h> 69 #include <dev/ic/ac97var.h> 70 71 #include <dev/pci/cs428x.h> 72 73 #include <machine/bus.h> 74 75 #if defined(ENABLE_SECONDARY_CODEC) 76 #define MAX_CHANNELS (4) 77 #define MAX_FIFO_SIZE 32 /* 128/4channels */ 78 #else 79 #define MAX_CHANNELS (2) 80 #define MAX_FIFO_SIZE 64 /* 128/2channels */ 81 #endif 82 83 /* IF functions for audio driver */ 84 int cs4281_match(struct device *, struct cfdata *, void *); 85 void cs4281_attach(struct device *, struct device *, void *); 86 int cs4281_intr(void *); 87 int cs4281_query_encoding(void *, struct audio_encoding *); 88 int cs4281_set_params(void *, int, int, struct audio_params *, struct audio_params *); 89 int cs4281_halt_output(void *); 90 int cs4281_halt_input(void *); 91 int cs4281_getdev(void *, struct audio_device *); 92 int cs4281_trigger_output(void *, void *, void *, int, void (*)(void *), 93 void *, struct audio_params *); 94 int cs4281_trigger_input(void *, void *, void *, int, void (*)(void *), 95 void *, struct audio_params *); 96 97 void cs4281_reset_codec(void *); 98 99 /* Internal functions */ 100 u_int8_t cs4281_sr2regval(int); 101 void cs4281_set_dac_rate(struct cs428x_softc *, int); 102 void cs4281_set_adc_rate(struct cs428x_softc *, int); 103 int cs4281_init(struct cs428x_softc *, int); 104 105 /* Power Management */ 106 void cs4281_power(int, void *); 107 108 struct audio_hw_if cs4281_hw_if = { 109 cs428x_open, 110 cs428x_close, 111 NULL, 112 cs4281_query_encoding, 113 cs4281_set_params, 114 cs428x_round_blocksize, 115 NULL, 116 NULL, 117 NULL, 118 NULL, 119 NULL, 120 cs4281_halt_output, 121 cs4281_halt_input, 122 NULL, 123 cs4281_getdev, 124 NULL, 125 cs428x_mixer_set_port, 126 cs428x_mixer_get_port, 127 cs428x_query_devinfo, 128 cs428x_malloc, 129 cs428x_free, 130 cs428x_round_buffersize, 131 cs428x_mappage, 132 cs428x_get_props, 133 cs4281_trigger_output, 134 cs4281_trigger_input, 135 NULL, 136 }; 137 138 #if NMIDI > 0 && 0 139 /* Midi Interface */ 140 void cs4281_midi_close(void*); 141 void cs4281_midi_getinfo(void *, struct midi_info *); 142 int cs4281_midi_open(void *, int, void (*)(void *, int), 143 void (*)(void *), void *); 144 int cs4281_midi_output(void *, int); 145 146 struct midi_hw_if cs4281_midi_hw_if = { 147 cs4281_midi_open, 148 cs4281_midi_close, 149 cs4281_midi_output, 150 cs4281_midi_getinfo, 151 0, 152 }; 153 #endif 154 155 struct cfattach clct_ca = { 156 sizeof(struct cs428x_softc), cs4281_match, cs4281_attach 157 }; 158 159 struct audio_device cs4281_device = { 160 "CS4281", 161 "", 162 "cs4281" 163 }; 164 165 166 int 167 cs4281_match(parent, match, aux) 168 struct device *parent; 169 struct cfdata *match; 170 void *aux; 171 { 172 struct pci_attach_args *pa = (struct pci_attach_args *)aux; 173 174 if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_CIRRUS) 175 return 0; 176 if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_CIRRUS_CS4281) 177 return 1; 178 return 0; 179 } 180 181 void 182 cs4281_attach(parent, self, aux) 183 struct device *parent; 184 struct device *self; 185 void *aux; 186 { 187 struct cs428x_softc *sc = (struct cs428x_softc *)self; 188 struct pci_attach_args *pa = (struct pci_attach_args *)aux; 189 pci_chipset_tag_t pc = pa->pa_pc; 190 char const *intrstr; 191 pci_intr_handle_t ih; 192 pcireg_t reg; 193 char devinfo[256]; 194 int pci_pwrmgmt_cap_reg, pci_pwrmgmt_csr_reg; 195 196 pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo); 197 printf(": %s (rev. 0x%02x)\n", devinfo, PCI_REVISION(pa->pa_class)); 198 199 /* Map I/O register */ 200 if (pci_mapreg_map(pa, PCI_BA0, 201 PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0, 202 &sc->ba0t, &sc->ba0h, NULL, NULL)) { 203 printf("%s: can't map BA0 space\n", sc->sc_dev.dv_xname); 204 return; 205 } 206 if (pci_mapreg_map(pa, PCI_BA1, 207 PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0, 208 &sc->ba1t, &sc->ba1h, NULL, NULL)) { 209 printf("%s: can't map BA1 space\n", sc->sc_dev.dv_xname); 210 return; 211 } 212 213 sc->sc_dmatag = pa->pa_dmat; 214 215 /* 216 * Set Power State D0. 217 * Without do this, 0xffffffff is read from all registers after 218 * using Windows. 219 * On my IBM Thinkpad X20, it is set to D3 after using Windows2000. 220 */ 221 if (pci_get_capability(pa->pa_pc, pa->pa_tag, PCI_CAP_PWRMGMT, 222 &pci_pwrmgmt_cap_reg, 0)) { 223 224 pci_pwrmgmt_csr_reg = pci_pwrmgmt_cap_reg + 4; 225 reg = pci_conf_read(pa->pa_pc, pa->pa_tag, 226 pci_pwrmgmt_csr_reg); 227 if ((reg & PCI_PMCSR_STATE_MASK) != PCI_PMCSR_STATE_D0) { 228 pci_conf_write(pc, pa->pa_tag, pci_pwrmgmt_csr_reg, 229 (reg & ~PCI_PMCSR_STATE_MASK) | 230 PCI_PMCSR_STATE_D0); 231 } 232 } 233 234 /* Enable the device (set bus master flag) */ 235 reg = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG); 236 pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, 237 reg | PCI_COMMAND_MASTER_ENABLE); 238 239 #if 0 240 /* LATENCY_TIMER setting */ 241 temp1 = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG); 242 if ( PCI_LATTIMER(temp1) < 32 ) { 243 temp1 &= 0xffff00ff; 244 temp1 |= 0x00002000; 245 pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG, temp1); 246 } 247 #endif 248 249 /* Map and establish the interrupt. */ 250 if (pci_intr_map(pa, &ih)) { 251 printf("%s: couldn't map interrupt\n", sc->sc_dev.dv_xname); 252 return; 253 } 254 intrstr = pci_intr_string(pc, ih); 255 256 sc->sc_ih = pci_intr_establish(pc, ih, IPL_AUDIO, cs4281_intr, sc); 257 if (sc->sc_ih == NULL) { 258 printf("%s: couldn't establish interrupt",sc->sc_dev.dv_xname); 259 if (intrstr != NULL) 260 printf(" at %s", intrstr); 261 printf("\n"); 262 return; 263 } 264 printf("%s: interrupting at %s\n", sc->sc_dev.dv_xname, intrstr); 265 266 /* 267 * Sound System start-up 268 */ 269 if (cs4281_init(sc,1) != 0) 270 return; 271 272 sc->type = TYPE_CS4281; 273 sc->halt_input = cs4281_halt_input; 274 sc->halt_output = cs4281_halt_output; 275 276 sc->dma_size = CS4281_BUFFER_SIZE / MAX_CHANNELS; 277 sc->dma_align = 0x10; 278 sc->hw_blocksize = sc->dma_size / 2; 279 280 /* AC 97 attachment */ 281 sc->host_if.arg = sc; 282 sc->host_if.attach = cs428x_attach_codec; 283 sc->host_if.read = cs428x_read_codec; 284 sc->host_if.write = cs428x_write_codec; 285 sc->host_if.reset = cs4281_reset_codec; 286 if (ac97_attach(&sc->host_if) != 0) { 287 printf("%s: ac97_attach failed\n", sc->sc_dev.dv_xname); 288 return; 289 } 290 audio_attach_mi(&cs4281_hw_if, sc, &sc->sc_dev); 291 292 #if NMIDI > 0 && 0 293 midi_attach_mi(&cs4281_midi_hw_if, sc, &sc->sc_dev); 294 #endif 295 296 sc->sc_suspend = PWR_RESUME; 297 sc->sc_powerhook = powerhook_establish(cs4281_power, sc); 298 } 299 300 int 301 cs4281_intr(p) 302 void *p; 303 { 304 struct cs428x_softc *sc = p; 305 u_int32_t intr, hdsr0, hdsr1; 306 char *empty_dma; 307 int handled = 0; 308 309 hdsr0 = 0; 310 hdsr1 = 0; 311 312 /* grab interrupt register */ 313 intr = BA0READ4(sc, CS4281_HISR); 314 315 DPRINTF(("cs4281_intr:")); 316 /* not for me */ 317 if ((intr & HISR_INTENA) == 0) { 318 /* clear the interrupt register */ 319 BA0WRITE4(sc, CS4281_HICR, HICR_CHGM | HICR_IEV); 320 return 0; 321 } 322 323 if (intr & HISR_DMA0) 324 hdsr0 = BA0READ4(sc, CS4281_HDSR0); /* clear intr condition */ 325 if (intr & HISR_DMA1) 326 hdsr1 = BA0READ4(sc, CS4281_HDSR1); /* clear intr condition */ 327 /* clear the interrupt register */ 328 BA0WRITE4(sc, CS4281_HICR, HICR_CHGM | HICR_IEV); 329 330 DPRINTF(("intr = 0x%08x, hdsr0 = 0x%08x hdsr1 = 0x%08x\n", 331 intr, hdsr0, hdsr1)); 332 333 /* Playback Interrupt */ 334 if (intr & HISR_DMA0) { 335 handled = 1; 336 DPRINTF((" PB DMA 0x%x(%d)", (int)BA0READ4(sc, CS4281_DCA0), 337 (int)BA0READ4(sc, CS4281_DCC0))); 338 if (sc->sc_pintr) { 339 if ((sc->sc_pi%sc->sc_pcount) == 0) 340 sc->sc_pintr(sc->sc_parg); 341 } else { 342 printf("unexpected play intr\n"); 343 } 344 /* copy buffer */ 345 ++sc->sc_pi; 346 empty_dma = sc->sc_pdma->addr; 347 if (sc->sc_pi&1) 348 empty_dma += sc->hw_blocksize; 349 memcpy(empty_dma, sc->sc_pn, sc->hw_blocksize); 350 sc->sc_pn += sc->hw_blocksize; 351 if (sc->sc_pn >= sc->sc_pe) 352 sc->sc_pn = sc->sc_ps; 353 } 354 if (intr & HISR_DMA1) { 355 handled = 1; 356 /* copy from dma */ 357 DPRINTF((" CP DMA 0x%x(%d)", (int)BA0READ4(sc, CS4281_DCA1), 358 (int)BA0READ4(sc, CS4281_DCC1))); 359 ++sc->sc_ri; 360 empty_dma = sc->sc_rdma->addr; 361 if ((sc->sc_ri & 1) == 0) 362 empty_dma += sc->hw_blocksize; 363 memcpy(sc->sc_rn, empty_dma, sc->hw_blocksize); 364 if (sc->sc_rn >= sc->sc_re) 365 sc->sc_rn = sc->sc_rs; 366 if (sc->sc_rintr) { 367 if ((sc->sc_ri % sc->sc_rcount) == 0) 368 sc->sc_rintr(sc->sc_rarg); 369 } else { 370 printf("unexpected record intr\n"); 371 } 372 } 373 DPRINTF(("\n")); 374 375 return handled; 376 } 377 378 int 379 cs4281_query_encoding(addr, fp) 380 void *addr; 381 struct audio_encoding *fp; 382 { 383 switch (fp->index) { 384 case 0: 385 strcpy(fp->name, AudioEulinear); 386 fp->encoding = AUDIO_ENCODING_ULINEAR; 387 fp->precision = 8; 388 fp->flags = 0; 389 break; 390 case 1: 391 strcpy(fp->name, AudioEmulaw); 392 fp->encoding = AUDIO_ENCODING_ULAW; 393 fp->precision = 8; 394 fp->flags = AUDIO_ENCODINGFLAG_EMULATED; 395 break; 396 case 2: 397 strcpy(fp->name, AudioEalaw); 398 fp->encoding = AUDIO_ENCODING_ALAW; 399 fp->precision = 8; 400 fp->flags = AUDIO_ENCODINGFLAG_EMULATED; 401 break; 402 case 3: 403 strcpy(fp->name, AudioEslinear); 404 fp->encoding = AUDIO_ENCODING_SLINEAR; 405 fp->precision = 8; 406 fp->flags = 0; 407 break; 408 case 4: 409 strcpy(fp->name, AudioEslinear_le); 410 fp->encoding = AUDIO_ENCODING_SLINEAR_LE; 411 fp->precision = 16; 412 fp->flags = 0; 413 break; 414 case 5: 415 strcpy(fp->name, AudioEulinear_le); 416 fp->encoding = AUDIO_ENCODING_ULINEAR_LE; 417 fp->precision = 16; 418 fp->flags = 0; 419 break; 420 case 6: 421 strcpy(fp->name, AudioEslinear_be); 422 fp->encoding = AUDIO_ENCODING_SLINEAR_BE; 423 fp->precision = 16; 424 fp->flags = 0; 425 break; 426 case 7: 427 strcpy(fp->name, AudioEulinear_be); 428 fp->encoding = AUDIO_ENCODING_ULINEAR_BE; 429 fp->precision = 16; 430 fp->flags = 0; 431 break; 432 default: 433 return EINVAL; 434 } 435 return 0; 436 } 437 438 int 439 cs4281_set_params(addr, setmode, usemode, play, rec) 440 void *addr; 441 int setmode, usemode; 442 struct audio_params *play, *rec; 443 { 444 struct cs428x_softc *sc = addr; 445 struct audio_params *p; 446 int mode; 447 448 for (mode = AUMODE_RECORD; mode != -1; 449 mode = mode == AUMODE_RECORD ? AUMODE_PLAY : -1) { 450 if ((setmode & mode) == 0) 451 continue; 452 453 p = mode == AUMODE_PLAY ? play : rec; 454 455 if (p == play) { 456 DPRINTFN(5,("play: sample=%ld precision=%d channels=%d\n", 457 p->sample_rate, p->precision, p->channels)); 458 if (p->sample_rate < 6023 || p->sample_rate > 48000 || 459 (p->precision != 8 && p->precision != 16) || 460 (p->channels != 1 && p->channels != 2)) { 461 return (EINVAL); 462 } 463 } else { 464 DPRINTFN(5,("rec: sample=%ld precision=%d channels=%d\n", 465 p->sample_rate, p->precision, p->channels)); 466 if (p->sample_rate < 6023 || p->sample_rate > 48000 || 467 (p->precision != 8 && p->precision != 16) || 468 (p->channels != 1 && p->channels != 2)) { 469 return (EINVAL); 470 } 471 } 472 p->factor = 1; 473 p->sw_code = 0; 474 475 switch (p->encoding) { 476 case AUDIO_ENCODING_SLINEAR_BE: 477 break; 478 case AUDIO_ENCODING_SLINEAR_LE: 479 break; 480 case AUDIO_ENCODING_ULINEAR_BE: 481 break; 482 case AUDIO_ENCODING_ULINEAR_LE: 483 break; 484 case AUDIO_ENCODING_ULAW: 485 if (mode == AUMODE_PLAY) { 486 p->sw_code = mulaw_to_slinear8; 487 } else { 488 p->sw_code = slinear8_to_mulaw; 489 } 490 break; 491 case AUDIO_ENCODING_ALAW: 492 if (mode == AUMODE_PLAY) { 493 p->sw_code = alaw_to_slinear8; 494 } else { 495 p->sw_code = slinear8_to_alaw; 496 } 497 break; 498 default: 499 return (EINVAL); 500 } 501 } 502 503 /* set sample rate */ 504 cs4281_set_dac_rate(sc, play->sample_rate); 505 cs4281_set_adc_rate(sc, rec->sample_rate); 506 return 0; 507 } 508 509 int 510 cs4281_halt_output(addr) 511 void *addr; 512 { 513 struct cs428x_softc *sc = addr; 514 515 BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK); 516 sc->sc_prun = 0; 517 return 0; 518 } 519 520 int 521 cs4281_halt_input(addr) 522 void *addr; 523 { 524 struct cs428x_softc *sc = addr; 525 526 BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK); 527 sc->sc_rrun = 0; 528 return 0; 529 } 530 531 int 532 cs4281_getdev(addr, retp) 533 void *addr; 534 struct audio_device *retp; 535 { 536 *retp = cs4281_device; 537 return 0; 538 } 539 540 int 541 cs4281_trigger_output(addr, start, end, blksize, intr, arg, param) 542 void *addr; 543 void *start, *end; 544 int blksize; 545 void (*intr) __P((void *)); 546 void *arg; 547 struct audio_params *param; 548 { 549 struct cs428x_softc *sc = addr; 550 u_int32_t fmt=0; 551 struct cs428x_dma *p; 552 int dma_count; 553 554 #ifdef DIAGNOSTIC 555 if (sc->sc_prun) 556 printf("cs4281_trigger_output: already running\n"); 557 #endif 558 sc->sc_prun = 1; 559 560 DPRINTF(("cs4281_trigger_output: sc=%p start=%p end=%p " 561 "blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg)); 562 sc->sc_pintr = intr; 563 sc->sc_parg = arg; 564 565 /* stop playback DMA */ 566 BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK); 567 568 DPRINTF(("param: precision=%d factor=%d channels=%d encoding=%d\n", 569 param->precision, param->factor, param->channels, 570 param->encoding)); 571 for (p = sc->sc_dmas; p != NULL && BUFADDR(p) != start; p = p->next) 572 ; 573 if (p == NULL) { 574 printf("cs4281_trigger_output: bad addr %p\n", start); 575 return (EINVAL); 576 } 577 578 sc->sc_pcount = blksize / sc->hw_blocksize; 579 sc->sc_ps = (char *)start; 580 sc->sc_pe = (char *)end; 581 sc->sc_pdma = p; 582 sc->sc_pbuf = KERNADDR(p); 583 sc->sc_pi = 0; 584 sc->sc_pn = sc->sc_ps; 585 if (blksize >= sc->dma_size) { 586 sc->sc_pn = sc->sc_ps + sc->dma_size; 587 memcpy(sc->sc_pbuf, start, sc->dma_size); 588 ++sc->sc_pi; 589 } else { 590 sc->sc_pn = sc->sc_ps + sc->hw_blocksize; 591 memcpy(sc->sc_pbuf, start, sc->hw_blocksize); 592 } 593 594 dma_count = sc->dma_size; 595 if (param->precision * param->factor != 8) 596 dma_count /= 2; /* 16 bit */ 597 if (param->channels > 1) 598 dma_count /= 2; /* Stereo */ 599 600 DPRINTF(("cs4281_trigger_output: DMAADDR(p)=0x%x count=%d\n", 601 (int)DMAADDR(p), dma_count)); 602 BA0WRITE4(sc, CS4281_DBA0, DMAADDR(p)); 603 BA0WRITE4(sc, CS4281_DBC0, dma_count-1); 604 605 /* set playback format */ 606 fmt = BA0READ4(sc, CS4281_DMR0) & ~DMRn_FMTMSK; 607 if (param->precision * param->factor == 8) 608 fmt |= DMRn_SIZE8; 609 if (param->channels == 1) 610 fmt |= DMRn_MONO; 611 if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || 612 param->encoding == AUDIO_ENCODING_SLINEAR_BE) 613 fmt |= DMRn_BEND; 614 if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || 615 param->encoding == AUDIO_ENCODING_ULINEAR_LE) 616 fmt |= DMRn_USIGN; 617 BA0WRITE4(sc, CS4281_DMR0, fmt); 618 619 /* set sample rate */ 620 sc->sc_prate = param->sample_rate; 621 cs4281_set_dac_rate(sc, param->sample_rate); 622 623 /* start DMA */ 624 BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) & ~DCRn_MSK); 625 /* Enable interrupts */ 626 BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); 627 628 DPRINTF(("HICR =0x%08x(expected 0x00000001)\n", BA0READ4(sc, CS4281_HICR))); 629 DPRINTF(("HIMR =0x%08x(expected 0x00f0fc3f)\n", BA0READ4(sc, CS4281_HIMR))); 630 DPRINTF(("DMR0 =0x%08x(expected 0x2???0018)\n", BA0READ4(sc, CS4281_DMR0))); 631 DPRINTF(("DCR0 =0x%08x(expected 0x00030000)\n", BA0READ4(sc, CS4281_DCR0))); 632 DPRINTF(("FCR0 =0x%08x(expected 0x81000f00)\n", BA0READ4(sc, CS4281_FCR0))); 633 DPRINTF(("DACSR=0x%08x(expected 1 for 44kHz 5 for 8kHz)\n", 634 BA0READ4(sc, CS4281_DACSR))); 635 DPRINTF(("SRCSA=0x%08x(expected 0x0b0a0100)\n", BA0READ4(sc, CS4281_SRCSA))); 636 DPRINTF(("SSPM&SSPM_PSRCEN =0x%08x(expected 0x00000010)\n", 637 BA0READ4(sc, CS4281_SSPM) & SSPM_PSRCEN)); 638 639 return 0; 640 } 641 642 int 643 cs4281_trigger_input(addr, start, end, blksize, intr, arg, param) 644 void *addr; 645 void *start, *end; 646 int blksize; 647 void (*intr) __P((void *)); 648 void *arg; 649 struct audio_params *param; 650 { 651 struct cs428x_softc *sc = addr; 652 struct cs428x_dma *p; 653 u_int32_t fmt=0; 654 int dma_count; 655 656 printf("cs4281_trigger_input: not implemented yet\n"); 657 #ifdef DIAGNOSTIC 658 if (sc->sc_rrun) 659 printf("cs4281_trigger_input: already running\n"); 660 #endif 661 sc->sc_rrun = 1; 662 DPRINTF(("cs4281_trigger_input: sc=%p start=%p end=%p " 663 "blksize=%d intr=%p(%p)\n", addr, start, end, blksize, intr, arg)); 664 sc->sc_rintr = intr; 665 sc->sc_rarg = arg; 666 667 /* stop recording DMA */ 668 BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK); 669 670 for (p = sc->sc_dmas; p && BUFADDR(p) != start; p = p->next) 671 ; 672 if (!p) { 673 printf("cs4281_trigger_input: bad addr %p\n", start); 674 return (EINVAL); 675 } 676 677 sc->sc_rcount = blksize / sc->hw_blocksize; 678 sc->sc_rs = (char *)start; 679 sc->sc_re = (char *)end; 680 sc->sc_rdma = p; 681 sc->sc_rbuf = KERNADDR(p); 682 sc->sc_ri = 0; 683 sc->sc_rn = sc->sc_rs; 684 685 dma_count = sc->dma_size; 686 if (param->precision * param->factor == 8) 687 dma_count /= 2; 688 if (param->channels > 1) 689 dma_count /= 2; 690 691 DPRINTF(("cs4281_trigger_input: DMAADDR(p)=0x%x count=%d\n", 692 (int)DMAADDR(p), dma_count)); 693 BA0WRITE4(sc, CS4281_DBA1, DMAADDR(p)); 694 BA0WRITE4(sc, CS4281_DBC1, dma_count-1); 695 696 /* set recording format */ 697 fmt = BA0READ4(sc, CS4281_DMR1) & ~DMRn_FMTMSK; 698 if (param->precision * param->factor == 8) 699 fmt |= DMRn_SIZE8; 700 if (param->channels == 1) 701 fmt |= DMRn_MONO; 702 if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || 703 param->encoding == AUDIO_ENCODING_SLINEAR_BE) 704 fmt |= DMRn_BEND; 705 if (param->encoding == AUDIO_ENCODING_ULINEAR_BE || 706 param->encoding == AUDIO_ENCODING_ULINEAR_LE) 707 fmt |= DMRn_USIGN; 708 BA0WRITE4(sc, CS4281_DMR1, fmt); 709 710 /* set sample rate */ 711 sc->sc_rrate = param->sample_rate; 712 cs4281_set_adc_rate(sc, param->sample_rate); 713 714 /* Start DMA */ 715 BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) & ~DCRn_MSK); 716 /* Enable interrupts */ 717 BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); 718 719 DPRINTF(("HICR=0x%08x\n", BA0READ4(sc, CS4281_HICR))); 720 DPRINTF(("HIMR=0x%08x\n", BA0READ4(sc, CS4281_HIMR))); 721 DPRINTF(("DMR1=0x%08x\n", BA0READ4(sc, CS4281_DMR1))); 722 DPRINTF(("DCR1=0x%08x\n", BA0READ4(sc, CS4281_DCR1))); 723 724 return 0; 725 } 726 727 /* Power Hook */ 728 void 729 cs4281_power(why, v) 730 int why; 731 void *v; 732 { 733 struct cs428x_softc *sc = (struct cs428x_softc *)v; 734 static u_int32_t dba0 = 0, dbc0 = 0, dmr0 = 0, dcr0 = 0; 735 static u_int32_t dba1 = 0, dbc1 = 0, dmr1 = 0, dcr1 = 0; 736 737 DPRINTF(("%s: cs4281_power why=%d\n", sc->sc_dev.dv_xname, why)); 738 switch (why) { 739 case PWR_SUSPEND: 740 case PWR_STANDBY: 741 sc->sc_suspend = why; 742 743 /* save current playback status */ 744 if (sc->sc_prun) { 745 dcr0 = BA0READ4(sc, CS4281_DCR0); 746 dmr0 = BA0READ4(sc, CS4281_DMR0); 747 dbc0 = BA0READ4(sc, CS4281_DBC0); 748 dba0 = BA0READ4(sc, CS4281_DBA0); 749 } 750 751 /* save current capture status */ 752 if (sc->sc_rrun) { 753 dcr1 = BA0READ4(sc, CS4281_DCR1); 754 dmr1 = BA0READ4(sc, CS4281_DMR1); 755 dbc1 = BA0READ4(sc, CS4281_DBC1); 756 dba1 = BA0READ4(sc, CS4281_DBA1); 757 } 758 /* Stop DMA */ 759 BA0WRITE4(sc, CS4281_DCR0, BA0READ4(sc, CS4281_DCR0) | DCRn_MSK); 760 BA0WRITE4(sc, CS4281_DCR1, BA0READ4(sc, CS4281_DCR1) | DCRn_MSK); 761 break; 762 case PWR_RESUME: 763 if (sc->sc_suspend == PWR_RESUME) { 764 printf("cs4281_power: odd, resume without suspend.\n"); 765 sc->sc_suspend = why; 766 return; 767 } 768 sc->sc_suspend = why; 769 cs4281_init(sc,0); 770 cs4281_reset_codec(sc); 771 772 /* restore ac97 registers */ 773 (*sc->codec_if->vtbl->restore_ports)(sc->codec_if); 774 775 /* restore DMA related status */ 776 if (sc->sc_prun) { 777 cs4281_set_dac_rate(sc, sc->sc_prate); 778 BA0WRITE4(sc, CS4281_DBA0, dba0); 779 BA0WRITE4(sc, CS4281_DBC0, dbc0); 780 BA0WRITE4(sc, CS4281_DMR0, dmr0); 781 BA0WRITE4(sc, CS4281_DCR0, dcr0); 782 } 783 if (sc->sc_rrun) { 784 cs4281_set_adc_rate(sc, sc->sc_rrate); 785 BA0WRITE4(sc, CS4281_DBA1, dba1); 786 BA0WRITE4(sc, CS4281_DBC1, dbc1); 787 BA0WRITE4(sc, CS4281_DMR1, dmr1); 788 BA0WRITE4(sc, CS4281_DCR1, dcr1); 789 } 790 /* enable intterupts */ 791 if (sc->sc_prun || sc->sc_rrun) 792 BA0WRITE4(sc, CS4281_HICR, HICR_IEV | HICR_CHGM); 793 break; 794 case PWR_SOFTSUSPEND: 795 case PWR_SOFTSTANDBY: 796 case PWR_SOFTRESUME: 797 break; 798 } 799 } 800 801 /* control AC97 codec */ 802 void 803 cs4281_reset_codec(void *addr) 804 { 805 struct cs428x_softc *sc; 806 u_int16_t data; 807 u_int32_t dat32; 808 int n; 809 810 sc = addr; 811 812 DPRINTFN(3,("cs4281_reset_codec\n")); 813 814 /* Reset codec */ 815 BA0WRITE4(sc, CS428X_ACCTL, 0); 816 delay(50); /* delay 50us */ 817 818 BA0WRITE4(sc, CS4281_SPMC, 0); 819 delay(100); /* delay 100us */ 820 BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN); 821 #if defined(ENABLE_SECONDARY_CODEC) 822 BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E); 823 BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID); 824 #endif 825 delay(50000); /* XXX: delay 50ms */ 826 827 /* Enable ASYNC generation */ 828 BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN); 829 830 /* Wait for Codec ready. Linux driver wait 50ms here */ 831 n = 0; 832 while((BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY) == 0) { 833 delay(100); 834 if (++n > 1000) { 835 printf("reset_codec: AC97 codec ready timeout\n"); 836 return; 837 } 838 } 839 #if defined(ENABLE_SECONDARY_CODEC) 840 /* secondary codec ready*/ 841 n = 0; 842 while((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) { 843 delay(100); 844 if (++n > 1000) 845 return; 846 } 847 #endif 848 /* Set the serial timing configuration */ 849 /* XXX: undocumented but the Linux driver do this */ 850 BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); 851 852 /* Wait for Codec ready signal */ 853 n = 0; 854 do { 855 delay(1000); 856 if (++n > 1000) { 857 printf("%s: Timeout waiting for Codec ready\n", 858 sc->sc_dev.dv_xname); 859 return; 860 } 861 dat32 = BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY; 862 } while (dat32 == 0); 863 864 /* Enable Valid Frame output on ASDOUT */ 865 BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN | ACCTL_VFRM); 866 867 /* Wait until Codec Calibration is finished. Codec register 26h */ 868 n = 0; 869 do { 870 delay(1); 871 if (++n > 1000) { 872 printf("%s: Timeout waiting for Codec calibration\n", 873 sc->sc_dev.dv_xname); 874 return ; 875 } 876 cs428x_read_codec(sc, AC97_REG_POWER, &data); 877 } while ((data & 0x0f) != 0x0f); 878 879 /* Set the serial timing configuration again */ 880 /* XXX: undocumented but the Linux driver do this */ 881 BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); 882 883 /* Wait until we've sampled input slots 3 & 4 as valid */ 884 n = 0; 885 do { 886 delay(1000); 887 if (++n > 1000) { 888 printf("%s: Timeout waiting for sampled input slots as valid\n", 889 sc->sc_dev.dv_xname); 890 return; 891 } 892 dat32 = BA0READ4(sc, CS428X_ACISV) & (ACISV_ISV3 | ACISV_ISV4) ; 893 } while (dat32 != (ACISV_ISV3 | ACISV_ISV4)); 894 895 /* Start digital data transfer of audio data to the codec */ 896 BA0WRITE4(sc, CS428X_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4)); 897 } 898 899 900 /* Internal functions */ 901 902 /* convert sample rate to register value */ 903 u_int8_t 904 cs4281_sr2regval(rate) 905 int rate; 906 { 907 u_int8_t retval; 908 909 /* We don't have to change here. but anyway ... */ 910 if (rate > 48000) 911 rate = 48000; 912 if (rate < 6023) 913 rate = 6023; 914 915 switch (rate) { 916 case 8000: 917 retval = 5; 918 break; 919 case 11025: 920 retval = 4; 921 break; 922 case 16000: 923 retval = 3; 924 break; 925 case 22050: 926 retval = 2; 927 break; 928 case 44100: 929 retval = 1; 930 break; 931 case 48000: 932 retval = 0; 933 break; 934 default: 935 retval = 1536000/rate; /* == 24576000/(rate*16) */ 936 } 937 return retval; 938 } 939 940 void 941 cs4281_set_adc_rate(sc, rate) 942 struct cs428x_softc *sc; 943 int rate; 944 { 945 BA0WRITE4(sc, CS4281_ADCSR, cs4281_sr2regval(rate)); 946 } 947 948 void 949 cs4281_set_dac_rate(sc, rate) 950 struct cs428x_softc *sc; 951 int rate; 952 { 953 BA0WRITE4(sc, CS4281_DACSR, cs4281_sr2regval(rate)); 954 } 955 956 int 957 cs4281_init(sc, init) 958 struct cs428x_softc *sc; 959 int init; 960 { 961 int n; 962 u_int16_t data; 963 u_int32_t dat32; 964 965 /* set "Configuration Write Protect" register to 966 * 0x4281 to allow to write */ 967 BA0WRITE4(sc, CS4281_CWPR, 0x4281); 968 969 /* 970 * Unset "Full Power-Down bit of Extended PCI Power Management 971 * Control" register to release the reset state. 972 */ 973 dat32 = BA0READ4(sc, CS4281_EPPMC); 974 if (dat32 & EPPMC_FPDN) { 975 BA0WRITE4(sc, CS4281_EPPMC, dat32 & ~EPPMC_FPDN); 976 } 977 978 /* Start PLL out in known state */ 979 BA0WRITE4(sc, CS4281_CLKCR1, 0); 980 /* Start serial ports out in known state */ 981 BA0WRITE4(sc, CS4281_SERMC, 0); 982 983 /* Reset codec */ 984 BA0WRITE4(sc, CS428X_ACCTL, 0); 985 delay(50); /* delay 50us */ 986 987 BA0WRITE4(sc, CS4281_SPMC, 0); 988 delay(100); /* delay 100us */ 989 BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN); 990 #if defined(ENABLE_SECONDARY_CODEC) 991 BA0WRITE4(sc, CS4281_SPMC, SPMC_RSTN | SPCM_ASDIN2E); 992 BA0WRITE4(sc, CS4281_SERMC, SERMC_TCID); 993 #endif 994 delay(50000); /* XXX: delay 50ms */ 995 996 /* Turn on Sound System clocks based on ABITCLK */ 997 BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_DLLP); 998 delay(50000); /* XXX: delay 50ms */ 999 BA0WRITE4(sc, CS4281_CLKCR1, CLKCR1_SWCE | CLKCR1_DLLP); 1000 1001 /* Set enables for sections that are needed in the SSPM registers */ 1002 BA0WRITE4(sc, CS4281_SSPM, 1003 SSPM_MIXEN | /* Mixer */ 1004 SSPM_CSRCEN | /* Capture SRC */ 1005 SSPM_PSRCEN | /* Playback SRC */ 1006 SSPM_JSEN | /* Joystick */ 1007 SSPM_ACLEN | /* AC LINK */ 1008 SSPM_FMEN /* FM */ 1009 ); 1010 1011 /* Wait for clock stabilization */ 1012 n = 0; 1013 #if 1 1014 /* what document says */ 1015 while ( ( BA0READ4(sc, CS4281_CLKCR1)& (CLKCR1_DLLRDY | CLKCR1_CLKON)) 1016 != (CLKCR1_DLLRDY | CLKCR1_CLKON )) { 1017 delay(100); 1018 if ( ++n > 1000 ) 1019 return -1; 1020 } 1021 #else 1022 /* Cirrus driver for Linux does */ 1023 while ( !(BA0READ4(sc, CS4281_CLKCR1) & CLKCR1_DLLRDY)) { 1024 delay(1000); 1025 if ( ++n > 1000 ) 1026 return -1; 1027 } 1028 #endif 1029 1030 /* Enable ASYNC generation */ 1031 BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN); 1032 1033 /* Wait for Codec ready. Linux driver wait 50ms here */ 1034 n = 0; 1035 while((BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY) == 0) { 1036 delay(100); 1037 if (++n > 1000) 1038 return -1; 1039 } 1040 1041 #if defined(ENABLE_SECONDARY_CODEC) 1042 /* secondary codec ready*/ 1043 n = 0; 1044 while((BA0READ4(sc, CS4281_ACSTS2) & ACSTS2_CRDY2) == 0) { 1045 delay(100); 1046 if (++n > 1000) 1047 return -1; 1048 } 1049 #endif 1050 1051 /* Set the serial timing configuration */ 1052 /* XXX: undocumented but the Linux driver do this */ 1053 BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); 1054 1055 /* Wait for Codec ready signal */ 1056 n = 0; 1057 do { 1058 delay(1000); 1059 if (++n > 1000) { 1060 printf("%s: Timeout waiting for Codec ready\n", 1061 sc->sc_dev.dv_xname); 1062 return -1; 1063 } 1064 dat32 = BA0READ4(sc, CS428X_ACSTS) & ACSTS_CRDY; 1065 } while (dat32 == 0); 1066 1067 /* Enable Valid Frame output on ASDOUT */ 1068 BA0WRITE4(sc, CS428X_ACCTL, ACCTL_ESYN | ACCTL_VFRM); 1069 1070 /* Wait until Codec Calibration is finished. Codec register 26h */ 1071 n = 0; 1072 do { 1073 delay(1); 1074 if (++n > 1000) { 1075 printf("%s: Timeout waiting for Codec calibration\n", 1076 sc->sc_dev.dv_xname); 1077 return -1; 1078 } 1079 cs428x_read_codec(sc, AC97_REG_POWER, &data); 1080 } while ((data & 0x0f) != 0x0f); 1081 1082 /* Set the serial timing configuration again */ 1083 /* XXX: undocumented but the Linux driver do this */ 1084 BA0WRITE4(sc, CS4281_SERMC, SERMC_PTCAC97); 1085 1086 /* Wait until we've sampled input slots 3 & 4 as valid */ 1087 n = 0; 1088 do { 1089 delay(1000); 1090 if (++n > 1000) { 1091 printf("%s: Timeout waiting for sampled input slots as valid\n", 1092 sc->sc_dev.dv_xname); 1093 return -1; 1094 } 1095 dat32 = BA0READ4(sc, CS428X_ACISV) & (ACISV_ISV3 | ACISV_ISV4); 1096 } while (dat32 != (ACISV_ISV3 | ACISV_ISV4)); 1097 1098 /* Start digital data transfer of audio data to the codec */ 1099 BA0WRITE4(sc, CS428X_ACOSV, (ACOSV_SLV3 | ACOSV_SLV4)); 1100 1101 cs428x_write_codec(sc, AC97_REG_HEADPHONE_VOLUME, 0); 1102 cs428x_write_codec(sc, AC97_REG_MASTER_VOLUME, 0); 1103 1104 /* Power on the DAC */ 1105 cs428x_read_codec(sc, AC97_REG_POWER, &data); 1106 cs428x_write_codec(sc, AC97_REG_POWER, data & 0xfdff); 1107 1108 /* Wait until we sample a DAC ready state. 1109 * Not documented, but Linux driver does. 1110 */ 1111 for (n = 0; n < 32; ++n) { 1112 delay(1000); 1113 cs428x_read_codec(sc, AC97_REG_POWER, &data); 1114 if (data & 0x02) 1115 break; 1116 } 1117 1118 /* Power on the ADC */ 1119 cs428x_read_codec(sc, AC97_REG_POWER, &data); 1120 cs428x_write_codec(sc, AC97_REG_POWER, data & 0xfeff); 1121 1122 /* Wait until we sample ADC ready state. 1123 * Not documented, but Linux driver does. 1124 */ 1125 for (n = 0; n < 32; ++n) { 1126 delay(1000); 1127 cs428x_read_codec(sc, AC97_REG_POWER, &data); 1128 if (data & 0x01) 1129 break; 1130 } 1131 1132 #if 0 1133 /* Initialize AC-Link features */ 1134 /* variable sample-rate support */ 1135 mem = BA0READ4(sc, CS4281_SERMC); 1136 mem |= (SERMC_ODSEN1 | SERMC_ODSEN2); 1137 BA0WRITE4(sc, CS4281_SERMC, mem); 1138 /* XXX: more... */ 1139 1140 /* Initialize SSCR register features */ 1141 /* XXX: hardware volume setting */ 1142 BA0WRITE4(sc, CS4281_SSCR, ~SSCR_HVC); /* disable HW volume setting */ 1143 #endif 1144 1145 /* disable Sound Blaster Pro emulation */ 1146 /* XXX: 1147 * Cannot set since the documents does not describe which bit is 1148 * correspond to SSCR_SB. Since the reset value of SSCR is 0, 1149 * we can ignore it.*/ 1150 #if 0 1151 BA0WRITE4(sc, CS4281_SSCR, SSCR_SB); 1152 #endif 1153 1154 /* map AC97 PCM playback to DMA Channel 0 */ 1155 /* Reset FEN bit to setup first */ 1156 BA0WRITE4(sc, CS4281_FCR0, (BA0READ4(sc,CS4281_FCR0) & ~FCRn_FEN)); 1157 /* 1158 *| RS[4:0]/| | 1159 *| LS[4:0] | AC97 | Slot Function 1160 *|---------+--------+-------------------- 1161 *| 0 | 3 | Left PCM Playback 1162 *| 1 | 4 | Right PCM Playback 1163 *| 2 | 5 | Phone Line 1 DAC 1164 *| 3 | 6 | Center PCM Playback 1165 *.... 1166 * quoted from Table 29(p109) 1167 */ 1168 dat32 = 0x01 << 24 | /* RS[4:0] = 1 see above */ 1169 0x00 << 16 | /* LS[4:0] = 0 see above */ 1170 0x0f << 8 | /* SZ[6:0] = 15 size of buffer */ 1171 0x00 << 0 ; /* OF[6:0] = 0 offset */ 1172 BA0WRITE4(sc, CS4281_FCR0, dat32); 1173 BA0WRITE4(sc, CS4281_FCR0, dat32 | FCRn_FEN); 1174 1175 /* map AC97 PCM record to DMA Channel 1 */ 1176 /* Reset FEN bit to setup first */ 1177 BA0WRITE4(sc, CS4281_FCR1, (BA0READ4(sc,CS4281_FCR1) & ~FCRn_FEN)); 1178 /* 1179 *| RS[4:0]/| 1180 *| LS[4:0] | AC97 | Slot Function 1181 *|---------+------+------------------- 1182 *| 10 | 3 | Left PCM Record 1183 *| 11 | 4 | Right PCM Record 1184 *| 12 | 5 | Phone Line 1 ADC 1185 *| 13 | 6 | Mic ADC 1186 *.... 1187 * quoted from Table 30(p109) 1188 */ 1189 dat32 = 0x0b << 24 | /* RS[4:0] = 11 See above */ 1190 0x0a << 16 | /* LS[4:0] = 10 See above */ 1191 0x0f << 8 | /* SZ[6:0] = 15 Size of buffer */ 1192 0x10 << 0 ; /* OF[6:0] = 16 offset */ 1193 1194 /* XXX: I cannot understand why FCRn_PSH is needed here. */ 1195 BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_PSH); 1196 BA0WRITE4(sc, CS4281_FCR1, dat32 | FCRn_FEN); 1197 1198 #if 0 1199 /* Disable DMA Channel 2, 3 */ 1200 BA0WRITE4(sc, CS4281_FCR2, (BA0READ4(sc,CS4281_FCR2) & ~FCRn_FEN)); 1201 BA0WRITE4(sc, CS4281_FCR3, (BA0READ4(sc,CS4281_FCR3) & ~FCRn_FEN)); 1202 #endif 1203 1204 /* Set the SRC Slot Assignment accordingly */ 1205 /*| PLSS[4:0]/ 1206 *| PRSS[4:0] | AC97 | Slot Function 1207 *|-----------+------+---------------- 1208 *| 0 | 3 | Left PCM Playback 1209 *| 1 | 4 | Right PCM Playback 1210 *| 2 | 5 | phone line 1 DAC 1211 *| 3 | 6 | Center PCM Playback 1212 *| 4 | 7 | Left Surround PCM Playback 1213 *| 5 | 8 | Right Surround PCM Playback 1214 *...... 1215 * 1216 *| CLSS[4:0]/ 1217 *| CRSS[4:0] | AC97 | Codec |Slot Function 1218 *|-----------+------+-------+----------------- 1219 *| 10 | 3 |Primary| Left PCM Record 1220 *| 11 | 4 |Primary| Right PCM Record 1221 *| 12 | 5 |Primary| Phone Line 1 ADC 1222 *| 13 | 6 |Primary| Mic ADC 1223 *|..... 1224 *| 20 | 3 | Sec. | Left PCM Record 1225 *| 21 | 4 | Sec. | Right PCM Record 1226 *| 22 | 5 | Sec. | Phone Line 1 ADC 1227 *| 23 | 6 | Sec. | Mic ADC 1228 */ 1229 dat32 = 0x0b << 24 | /* CRSS[4:0] Right PCM Record(primary) */ 1230 0x0a << 16 | /* CLSS[4:0] Left PCM Record(primary) */ 1231 0x01 << 8 | /* PRSS[4:0] Right PCM Playback */ 1232 0x00 << 0; /* PLSS[4:0] Left PCM Playback */ 1233 BA0WRITE4(sc, CS4281_SRCSA, dat32); 1234 1235 /* Set interrupt to occurred at Half and Full terminal 1236 * count interrupt enable for DMA channel 0 and 1. 1237 * To keep DMA stop, set MSK. 1238 */ 1239 dat32 = DCRn_HTCIE | DCRn_TCIE | DCRn_MSK; 1240 BA0WRITE4(sc, CS4281_DCR0, dat32); 1241 BA0WRITE4(sc, CS4281_DCR1, dat32); 1242 1243 /* Set Auto-Initialize Contorl enable */ 1244 BA0WRITE4(sc, CS4281_DMR0, 1245 DMRn_DMA | DMRn_AUTO | DMRn_TR_READ); 1246 BA0WRITE4(sc, CS4281_DMR1, 1247 DMRn_DMA | DMRn_AUTO | DMRn_TR_WRITE); 1248 1249 /* Clear DMA Mask in HIMR */ 1250 dat32 = ~HIMR_DMAIM & ~HIMR_D1IM & ~HIMR_D0IM; 1251 BA0WRITE4(sc, CS4281_HIMR, 1252 BA0READ4(sc, CS4281_HIMR) & dat32); 1253 1254 /* set current status */ 1255 if (init != 0) { 1256 sc->sc_prun = 0; 1257 sc->sc_rrun = 0; 1258 } 1259 1260 /* setup playback volume */ 1261 BA0WRITE4(sc, CS4281_PPRVC, 7); 1262 BA0WRITE4(sc, CS4281_PPLVC, 7); 1263 1264 return 0; 1265 } 1266