1 /* $NetBSD: artsata.c,v 1.26 2014/03/29 19:28:24 christos Exp $ */ 2 3 /*- 4 * Copyright (c) 2003 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of Wasabi Systems, Inc. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 #include <sys/cdefs.h> 33 __KERNEL_RCSID(0, "$NetBSD: artsata.c,v 1.26 2014/03/29 19:28:24 christos Exp $"); 34 35 #include "opt_pciide.h" 36 37 #include <sys/param.h> 38 #include <sys/systm.h> 39 #include <sys/malloc.h> 40 41 #include <dev/pci/pcivar.h> 42 #include <dev/pci/pcidevs.h> 43 #include <dev/pci/pciidereg.h> 44 #include <dev/pci/pciidevar.h> 45 #include <dev/pci/pciide_i31244_reg.h> 46 47 #include <dev/ata/satareg.h> 48 #include <dev/ata/satavar.h> 49 #include <dev/ata/atareg.h> 50 #include <dev/ata/atavar.h> 51 52 static void artisea_chip_map(struct pciide_softc*, 53 const struct pci_attach_args *); 54 55 static int artsata_match(device_t, cfdata_t, void *); 56 static void artsata_attach(device_t, device_t, void *); 57 58 static const struct pciide_product_desc pciide_artsata_products[] = { 59 { PCI_PRODUCT_INTEL_31244, 60 0, 61 "Intel 31244 Serial ATA Controller", 62 artisea_chip_map, 63 }, 64 { 0, 65 0, 66 NULL, 67 NULL 68 } 69 }; 70 71 struct artisea_cmd_map 72 { 73 u_int8_t offset; 74 u_int8_t size; 75 }; 76 77 static const struct artisea_cmd_map artisea_dpa_cmd_map[] = 78 { 79 {ARTISEA_SUPDDR, 4}, /* 0 Data */ 80 {ARTISEA_SUPDER, 1}, /* 1 Error */ 81 {ARTISEA_SUPDCSR, 2}, /* 2 Sector Count */ 82 {ARTISEA_SUPDSNR, 2}, /* 3 Sector Number */ 83 {ARTISEA_SUPDCLR, 2}, /* 4 Cylinder Low */ 84 {ARTISEA_SUPDCHR, 2}, /* 5 Cylinder High */ 85 {ARTISEA_SUPDDHR, 1}, /* 6 Device/Head */ 86 {ARTISEA_SUPDCR, 1}, /* 7 Command */ 87 {ARTISEA_SUPDSR, 1}, /* 8 Status */ 88 {ARTISEA_SUPDFR, 2} /* 9 Feature */ 89 }; 90 91 #define ARTISEA_NUM_CHAN 4 92 93 CFATTACH_DECL_NEW(artsata, sizeof(struct pciide_softc), 94 artsata_match, artsata_attach, pciide_detach, NULL); 95 96 static int 97 artsata_match(device_t parent, cfdata_t match, void *aux) 98 { 99 struct pci_attach_args *pa = aux; 100 101 if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_INTEL) { 102 if (pciide_lookup_product(pa->pa_id, pciide_artsata_products)) 103 return (2); 104 } 105 return (0); 106 } 107 108 static void 109 artsata_attach(device_t parent, device_t self, void *aux) 110 { 111 struct pci_attach_args *pa = aux; 112 struct pciide_softc *sc = device_private(self); 113 114 sc->sc_wdcdev.sc_atac.atac_dev = self; 115 116 pciide_common_attach(sc, pa, 117 pciide_lookup_product(pa->pa_id, pciide_artsata_products)); 118 119 } 120 121 static void 122 artisea_mapregs(const struct pci_attach_args *pa, struct pciide_channel *cp, 123 int (*pci_intr)(void *)) 124 { 125 struct pciide_softc *sc = CHAN_TO_PCIIDE(&cp->ata_channel); 126 struct ata_channel *wdc_cp = &cp->ata_channel; 127 struct wdc_regs *wdr = CHAN_TO_WDC_REGS(wdc_cp); 128 const char *intrstr; 129 pci_intr_handle_t intrhandle; 130 int i; 131 char intrbuf[PCI_INTRSTR_LEN]; 132 133 cp->compat = 0; 134 135 if (sc->sc_pci_ih == NULL) { 136 if (pci_intr_map(pa, &intrhandle) != 0) { 137 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev, 138 "couldn't map native-PCI interrupt\n"); 139 goto bad; 140 } 141 intrstr = pci_intr_string(pa->pa_pc, intrhandle, 142 intrbuf, sizeof(intrbuf)); 143 sc->sc_pci_ih = pci_intr_establish(pa->pa_pc, 144 intrhandle, IPL_BIO, pci_intr, sc); 145 if (sc->sc_pci_ih != NULL) { 146 aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev, 147 "using %s for native-PCI interrupt\n", intrstr); 148 } else { 149 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev, 150 "couldn't establish native-PCI interrupt"); 151 if (intrstr != NULL) 152 aprint_error(" at %s", intrstr); 153 aprint_error("\n"); 154 goto bad; 155 } 156 } 157 cp->ih = sc->sc_pci_ih; 158 wdr->cmd_iot = sc->sc_ba5_st; 159 if (bus_space_subregion (sc->sc_ba5_st, sc->sc_ba5_sh, 160 ARTISEA_DPA_PORT_BASE(wdc_cp->ch_channel), 0x200, 161 &wdr->cmd_baseioh) != 0) { 162 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev, 163 "couldn't map %s channel cmd regs\n", cp->name); 164 goto bad; 165 } 166 167 wdr->ctl_iot = sc->sc_ba5_st; 168 if (bus_space_subregion(wdr->cmd_iot, wdr->cmd_baseioh, 169 ARTISEA_SUPDDCTLR, 1, &cp->ctl_baseioh) != 0) { 170 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev, 171 "couldn't map %s channel ctl regs\n", cp->name); 172 goto bad; 173 } 174 wdr->ctl_ioh = cp->ctl_baseioh; 175 176 for (i = 0; i < WDC_NREG + 2; i++) { 177 178 if (bus_space_subregion(wdr->cmd_iot, wdr->cmd_baseioh, 179 artisea_dpa_cmd_map[i].offset, artisea_dpa_cmd_map[i].size, 180 &wdr->cmd_iohs[i]) != 0) { 181 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev, 182 "couldn't subregion %s channel cmd regs\n", 183 cp->name); 184 goto bad; 185 } 186 } 187 wdr->data32iot = wdr->cmd_iot; 188 wdr->data32ioh = wdr->cmd_iohs[0]; 189 190 wdr->sata_iot = wdr->cmd_iot; 191 wdr->sata_baseioh = wdr->cmd_baseioh; 192 193 if (bus_space_subregion(wdr->sata_iot, wdr->sata_baseioh, 194 ARTISEA_SUPERSET_DPA_OFF + ARTISEA_SUPDSSSR, 1, 195 &wdr->sata_status) != 0) { 196 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev, 197 "couldn't map channel %d sata_status regs\n", 198 wdc_cp->ch_channel); 199 goto bad; 200 } 201 if (bus_space_subregion(wdr->sata_iot, wdr->sata_baseioh, 202 ARTISEA_SUPERSET_DPA_OFF + ARTISEA_SUPDSSER, 1, 203 &wdr->sata_error) != 0) { 204 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev, 205 "couldn't map channel %d sata_error regs\n", 206 wdc_cp->ch_channel); 207 goto bad; 208 } 209 if (bus_space_subregion(wdr->sata_iot, wdr->sata_baseioh, 210 ARTISEA_SUPERSET_DPA_OFF + ARTISEA_SUPDSSCR, 1, 211 &wdr->sata_control) != 0) { 212 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev, 213 "couldn't map channel %d sata_control regs\n", 214 wdc_cp->ch_channel); 215 goto bad; 216 } 217 218 wdcattach(wdc_cp); 219 return; 220 221 bad: 222 wdc_cp->ch_flags |= ATACH_DISABLED; 223 return; 224 } 225 226 static int 227 artisea_chansetup(struct pciide_softc *sc, int channel, 228 pcireg_t interface) 229 { 230 struct pciide_channel *cp = &sc->pciide_channels[channel]; 231 sc->wdc_chanarray[channel] = &cp->ata_channel; 232 cp->name = PCIIDE_CHANNEL_NAME(channel); 233 cp->ata_channel.ch_channel = channel; 234 cp->ata_channel.ch_atac = &sc->sc_wdcdev.sc_atac; 235 cp->ata_channel.ch_queue = 236 malloc(sizeof(struct ata_queue), M_DEVBUF, M_NOWAIT); 237 if (cp->ata_channel.ch_queue == NULL) { 238 aprint_error("%s %s channel: " 239 "can't allocate memory for command queue", 240 device_xname(sc->sc_wdcdev.sc_atac.atac_dev), cp->name); 241 return 0; 242 } 243 return 1; 244 } 245 246 static void 247 artisea_mapreg_dma(struct pciide_softc *sc, const struct pci_attach_args *pa) 248 { 249 struct pciide_channel *pc; 250 int chan; 251 u_int32_t dma_ctl; 252 u_int32_t cacheline_len; 253 254 aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev, 255 "bus-master DMA support present"); 256 257 sc->sc_dma_ok = 1; 258 259 /* 260 * Errata #4 says that if the cacheline length is not set correctly, 261 * we can get corrupt MWI and Memory-Block-Write transactions. 262 */ 263 cacheline_len = PCI_CACHELINE(pci_conf_read (pa->pa_pc, pa->pa_tag, 264 PCI_BHLC_REG)); 265 if (cacheline_len == 0) { 266 aprint_verbose(", but unused (cacheline size not set in PCI conf)\n"); 267 sc->sc_dma_ok = 0; 268 return; 269 } 270 271 /* 272 * Final step of the work-around is to force the DMA engine to use 273 * the cache-line length information. 274 */ 275 dma_ctl = pci_conf_read(pa->pa_pc, pa->pa_tag, ARTISEA_PCI_SUDCSCR); 276 dma_ctl |= SUDCSCR_DMA_WCAE | SUDCSCR_DMA_RCAE; 277 pci_conf_write(pa->pa_pc, pa->pa_tag, ARTISEA_PCI_SUDCSCR, dma_ctl); 278 279 sc->sc_wdcdev.dma_arg = sc; 280 sc->sc_wdcdev.dma_init = pciide_dma_init; 281 sc->sc_wdcdev.dma_start = pciide_dma_start; 282 sc->sc_wdcdev.dma_finish = pciide_dma_finish; 283 sc->sc_dma_iot = sc->sc_ba5_st; 284 sc->sc_dmat = pa->pa_dmat; 285 286 if (device_cfdata(sc->sc_wdcdev.sc_atac.atac_dev)->cf_flags & 287 PCIIDE_OPTIONS_NODMA) { 288 aprint_verbose( 289 ", but unused (forced off by config file)\n"); 290 sc->sc_dma_ok = 0; 291 return; 292 } 293 294 /* 295 * Set up the default handles for the DMA registers. 296 * Just reserve 32 bits for each handle, unless space 297 * doesn't permit it. 298 */ 299 for (chan = 0; chan < ARTISEA_NUM_CHAN; chan++) { 300 pc = &sc->pciide_channels[chan]; 301 if (bus_space_subregion(sc->sc_ba5_st, sc->sc_ba5_sh, 302 ARTISEA_DPA_PORT_BASE(chan) + ARTISEA_SUPDDCMDR, 2, 303 &pc->dma_iohs[IDEDMA_CMD]) != 0 || 304 bus_space_subregion(sc->sc_ba5_st, sc->sc_ba5_sh, 305 ARTISEA_DPA_PORT_BASE(chan) + ARTISEA_SUPDDSR, 1, 306 &pc->dma_iohs[IDEDMA_CTL]) != 0 || 307 bus_space_subregion(sc->sc_ba5_st, sc->sc_ba5_sh, 308 ARTISEA_DPA_PORT_BASE(chan) + ARTISEA_SUPDDDTPR, 4, 309 &pc->dma_iohs[IDEDMA_TBL]) != 0) { 310 sc->sc_dma_ok = 0; 311 aprint_verbose(", but can't subregion registers\n"); 312 return; 313 } 314 } 315 316 aprint_verbose("\n"); 317 } 318 319 static void 320 artisea_chip_map_dpa(struct pciide_softc *sc, const struct pci_attach_args *pa) 321 { 322 struct pciide_channel *cp; 323 pcireg_t interface; 324 int channel; 325 326 interface = PCI_INTERFACE(pa->pa_class); 327 328 aprint_normal_dev(sc->sc_wdcdev.sc_atac.atac_dev, 329 "interface wired in DPA mode\n"); 330 331 if (pci_mapreg_map(pa, ARTISEA_PCI_DPA_BASE, PCI_MAPREG_MEM_TYPE_64BIT, 332 0, &sc->sc_ba5_st, &sc->sc_ba5_sh, NULL, &sc->sc_ba5_ss) != 0) 333 return; 334 335 artisea_mapreg_dma(sc, pa); 336 337 sc->sc_wdcdev.cap = WDC_CAPABILITY_WIDEREGS; 338 339 sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DATA16 | ATAC_CAP_DATA32; 340 sc->sc_wdcdev.sc_atac.atac_pio_cap = 4; 341 if (sc->sc_dma_ok) { 342 sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA | ATAC_CAP_UDMA; 343 sc->sc_wdcdev.irqack = pciide_irqack; 344 sc->sc_wdcdev.sc_atac.atac_dma_cap = 2; 345 sc->sc_wdcdev.sc_atac.atac_udma_cap = 6; 346 } 347 sc->sc_wdcdev.sc_atac.atac_set_modes = sata_setup_channel; 348 349 sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray; 350 sc->sc_wdcdev.sc_atac.atac_nchannels = ARTISEA_NUM_CHAN; 351 sc->sc_wdcdev.sc_atac.atac_probe = wdc_sataprobe; 352 sc->sc_wdcdev.wdc_maxdrives = 1; 353 354 wdc_allocate_regs(&sc->sc_wdcdev); 355 356 /* 357 * Perform a quick check to ensure that the device isn't configured 358 * in Spread-spectrum clocking mode. This feature is buggy and has 359 * been removed from the latest documentation. 360 * 361 * Note that although this bit is in the Channel regs, it's the same 362 * for all channels, so we check it just once here. 363 */ 364 if ((bus_space_read_4 (sc->sc_ba5_st, sc->sc_ba5_sh, 365 ARTISEA_DPA_PORT_BASE(0) + ARTISEA_SUPERSET_DPA_OFF + 366 ARTISEA_SUPDPFR) & SUPDPFR_SSCEN) != 0) { 367 aprint_error_dev(sc->sc_wdcdev.sc_atac.atac_dev, 368 "Spread-specturm clocking not supported by device\n"); 369 return; 370 } 371 372 /* Clear the LED0-only bit. */ 373 pci_conf_write (pa->pa_pc, pa->pa_tag, ARTISEA_PCI_SUECSR0, 374 pci_conf_read (pa->pa_pc, pa->pa_tag, ARTISEA_PCI_SUECSR0) & 375 ~SUECSR0_LED0_ONLY); 376 377 for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels; 378 channel++) { 379 cp = &sc->pciide_channels[channel]; 380 if (artisea_chansetup(sc, channel, interface) == 0) 381 continue; 382 /* XXX We can probably do interrupts more efficiently. */ 383 artisea_mapregs(pa, cp, pciide_pci_intr); 384 } 385 } 386 387 static void 388 artisea_chip_map(struct pciide_softc *sc, const struct pci_attach_args *pa) 389 { 390 struct pciide_channel *cp; 391 pcireg_t interface; 392 int channel; 393 394 if (pciide_chipen(sc, pa) == 0) 395 return; 396 397 interface = PCI_INTERFACE(pa->pa_class); 398 399 if (interface == 0) { 400 artisea_chip_map_dpa (sc, pa); 401 return; 402 } 403 404 aprint_verbose_dev(sc->sc_wdcdev.sc_atac.atac_dev, 405 "bus-master DMA support present"); 406 #ifdef PCIIDE_I31244_DISABLEDMA 407 if (sc->sc_pp->ide_product == PCI_PRODUCT_INTEL_31244 && 408 PCI_REVISION(pa->pa_class) == 0) { 409 aprint_verbose(" but disabled due to rev. 0"); 410 sc->sc_dma_ok = 0; 411 } else 412 #endif 413 pciide_mapreg_dma(sc, pa); 414 aprint_verbose("\n"); 415 416 /* 417 * XXX Configure LEDs to show activity. 418 */ 419 420 sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DATA16 | ATAC_CAP_DATA32; 421 sc->sc_wdcdev.sc_atac.atac_pio_cap = 4; 422 if (sc->sc_dma_ok) { 423 sc->sc_wdcdev.sc_atac.atac_cap |= ATAC_CAP_DMA | ATAC_CAP_UDMA; 424 sc->sc_wdcdev.irqack = pciide_irqack; 425 sc->sc_wdcdev.sc_atac.atac_dma_cap = 2; 426 sc->sc_wdcdev.sc_atac.atac_udma_cap = 6; 427 } 428 sc->sc_wdcdev.sc_atac.atac_set_modes = sata_setup_channel; 429 430 sc->sc_wdcdev.sc_atac.atac_channels = sc->wdc_chanarray; 431 sc->sc_wdcdev.sc_atac.atac_nchannels = PCIIDE_NUM_CHANNELS; 432 433 wdc_allocate_regs(&sc->sc_wdcdev); 434 435 for (channel = 0; channel < sc->sc_wdcdev.sc_atac.atac_nchannels; 436 channel++) { 437 cp = &sc->pciide_channels[channel]; 438 if (pciide_chansetup(sc, channel, interface) == 0) 439 continue; 440 pciide_mapchan(pa, cp, interface, pciide_pci_intr); 441 } 442 } 443