1 /* $NetBSD: rgephyreg.h,v 1.9 2015/08/21 16:29:48 jmcneill Exp $ */ 2 3 /* 4 * Copyright (c) 2003 5 * Bill Paul <wpaul@windriver.com>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 * 34 * $FreeBSD: /repoman/r/ncvs/src/sys/dev/mii/rgephyreg.h,v 1.1 2003/09/11 03:53:46 wpaul Exp $ 35 */ 36 37 #ifndef _DEV_MII_RGEPHYREG_H_ 38 #define _DEV_MII_RGEPHYREG_H_ 39 40 /* 41 * RealTek 8169S/8110S gigE PHY registers 42 */ 43 44 /* RTL8211B(L)/RTL8211C(L) */ 45 #define RGEPHY_MII_SSR 0x11 /* PHY Specific status register */ 46 #define RGEPHY_SSR_S1000 0x8000 /* 1000Mbps */ 47 #define RGEPHY_SSR_S100 0x4000 /* 100Mbps */ 48 #define RGEPHY_SSR_S10 0x0000 /* 10Mbps */ 49 #define RGEPHY_SSR_SPD_MASK 0xc000 50 #define RGEPHY_SSR_FDX 0x2000 /* full duplex */ 51 #define RGEPHY_SSR_PAGE_RECEIVED 0x1000 /* new page received */ 52 #define RGEPHY_SSR_SPD_DPLX_RESOLVED 0x0800 /* speed/duplex resolved */ 53 #define RGEPHY_SSR_LINK 0x0400 /* link up */ 54 #define RGEPHY_SSR_MDI_XOVER 0x0040 /* MDI crossover */ 55 #define RGEPHY_SSR_ALDPS 0x0008 /* RTL8211C(L) only */ 56 #define RGEPHY_SSR_JABBER 0x0001 /* Jabber */ 57 58 /* RTL8211F */ 59 #define RGEPHY_MII_PHYCR1 0x18 /* PHY Specific control register 1 */ 60 #define RGEPHY_PHYCR1_MDI_MMCE __BIT(9) 61 #define RGEPHY_PHYCR1_ALDPS_EN __BIT(2) 62 #define RGEPHY_MII_MACR 0x0d /* MMD Access control register */ 63 #define RGEPHY_MACR_FUNCTION __BITS(15,14) 64 #define RGEPHY_MACR_DEVAD __BITS(4,0) 65 #define RGEPHY_MII_MAADR 0x0e /* MMD Access address data register */ 66 67 #define RGEPHY_MII_PHYSR 0x1a /* PHY Specific status register */ 68 #define RGEPHY_PHYSR_ALDPS __BIT(14) 69 #define RGEPHY_PHYSR_MDI_PLUG __BIT(13) 70 #define RGEPHY_PHYSR_NWAY_EN __BIT(12) 71 #define RGEPHY_PHYSR_MASTER __BIT(11) 72 #define RGEPHY_PHYSR_EEE __BIT(8) 73 #define RGEPHY_PHYSR_RXFLOW_EN __BIT(7) 74 #define RGEPHY_PHYSR_TXFLOW_EN __BIT(6) 75 #define RGEPHY_PHYSR_SPEED __BITS(5,4) 76 #define RGEPHY_PHYSR_SPEED_10 0 77 #define RGEPHY_PHYSR_SPEED_100 1 78 #define RGEPHY_PHYSR_SPEED_1000 2 79 #define RGEPHY_PHYSR_DUPLEX __BIT(3) 80 #define RGEPHY_PHYSR_LINK __BIT(2) 81 #define RGEPHY_PHYSR_MDI_XOVER __BIT(1) 82 #define RGEPHY_PHYSR_JABBER __BIT(0) 83 84 #endif /* _DEV_MII_RGEPHYREG_H_ */ 85