1 /* $NetBSD: nsphy.c,v 1.32 2001/08/25 18:04:01 thorpej Exp $ */ 2 3 /*- 4 * Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 9 * NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. All advertising materials mentioning features or use of this software 20 * must display the following acknowledgement: 21 * This product includes software developed by the NetBSD 22 * Foundation, Inc. and its contributors. 23 * 4. Neither the name of The NetBSD Foundation nor the names of its 24 * contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGE. 38 */ 39 40 /* 41 * Copyright (c) 1997 Manuel Bouyer. All rights reserved. 42 * 43 * Redistribution and use in source and binary forms, with or without 44 * modification, are permitted provided that the following conditions 45 * are met: 46 * 1. Redistributions of source code must retain the above copyright 47 * notice, this list of conditions and the following disclaimer. 48 * 2. Redistributions in binary form must reproduce the above copyright 49 * notice, this list of conditions and the following disclaimer in the 50 * documentation and/or other materials provided with the distribution. 51 * 3. All advertising materials mentioning features or use of this software 52 * must display the following acknowledgement: 53 * This product includes software developed by Manuel Bouyer. 54 * 4. The name of the author may not be used to endorse or promote products 55 * derived from this software without specific prior written permission. 56 * 57 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 58 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 59 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 60 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 61 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 62 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 63 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 64 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 65 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 66 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 67 */ 68 69 /* 70 * driver for National Semiconductor's DP83840A ethernet 10/100 PHY 71 * Data Sheet available from www.national.com 72 */ 73 74 #include <sys/param.h> 75 #include <sys/systm.h> 76 #include <sys/kernel.h> 77 #include <sys/device.h> 78 #include <sys/malloc.h> 79 #include <sys/socket.h> 80 #include <sys/errno.h> 81 82 #include <net/if.h> 83 #include <net/if_media.h> 84 85 #include <dev/mii/mii.h> 86 #include <dev/mii/miivar.h> 87 #include <dev/mii/miidevs.h> 88 89 #include <dev/mii/nsphyreg.h> 90 91 int nsphymatch(struct device *, struct cfdata *, void *); 92 void nsphyattach(struct device *, struct device *, void *); 93 94 struct cfattach nsphy_ca = { 95 sizeof(struct mii_softc), nsphymatch, nsphyattach, mii_phy_detach, 96 mii_phy_activate 97 }; 98 99 int nsphy_service(struct mii_softc *, struct mii_data *, int); 100 void nsphy_status(struct mii_softc *); 101 102 const struct mii_phy_funcs nsphy_funcs = { 103 nsphy_service, nsphy_status, mii_phy_reset, 104 }; 105 106 const struct mii_phydesc nsphys[] = { 107 { MII_OUI_xxNATSEMI, MII_MODEL_xxNATSEMI_DP83840, 108 MII_STR_xxNATSEMI_DP83840 }, 109 110 { 0, 0, 111 NULL }, 112 }; 113 114 int 115 nsphymatch(struct device *parent, struct cfdata *match, void *aux) 116 { 117 struct mii_attach_args *ma = aux; 118 119 if (mii_phy_match(ma, nsphys) != NULL) 120 return (10); 121 122 return (0); 123 } 124 125 void 126 nsphyattach(struct device *parent, struct device *self, void *aux) 127 { 128 struct mii_softc *sc = (struct mii_softc *)self; 129 struct mii_attach_args *ma = aux; 130 struct mii_data *mii = ma->mii_data; 131 const struct mii_phydesc *mpd; 132 133 mpd = mii_phy_match(ma, nsphys); 134 printf(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2)); 135 136 sc->mii_inst = mii->mii_instance; 137 sc->mii_phy = ma->mii_phyno; 138 sc->mii_funcs = &nsphy_funcs; 139 sc->mii_pdata = mii; 140 sc->mii_flags = mii->mii_flags; 141 sc->mii_anegticks = 5; 142 143 PHY_RESET(sc); 144 145 sc->mii_capabilities = 146 PHY_READ(sc, MII_BMSR) & ma->mii_capmask; 147 printf("%s: ", sc->mii_dev.dv_xname); 148 if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0) 149 printf("no media present"); 150 else 151 mii_phy_add_media(sc); 152 printf("\n"); 153 } 154 155 int 156 nsphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd) 157 { 158 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 159 int reg; 160 161 if ((sc->mii_dev.dv_flags & DVF_ACTIVE) == 0) 162 return (ENXIO); 163 164 switch (cmd) { 165 case MII_POLLSTAT: 166 /* 167 * If we're not polling our PHY instance, just return. 168 */ 169 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 170 return (0); 171 break; 172 173 case MII_MEDIACHG: 174 /* 175 * If the media indicates a different PHY instance, 176 * isolate ourselves. 177 */ 178 if (IFM_INST(ife->ifm_media) != sc->mii_inst) { 179 reg = PHY_READ(sc, MII_BMCR); 180 PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO); 181 return (0); 182 } 183 184 /* 185 * If the interface is not up, don't do anything. 186 */ 187 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 188 break; 189 190 reg = PHY_READ(sc, MII_NSPHY_PCR); 191 192 /* 193 * Set up the PCR to use LED4 to indicate full-duplex 194 * in both 10baseT and 100baseTX modes. 195 */ 196 reg |= PCR_LED4MODE; 197 198 /* 199 * Make sure Carrier Intgrity Monitor function is 200 * disabled (normal for Node operation, but sometimes 201 * it's not set?!) 202 */ 203 reg |= PCR_CIMDIS; 204 205 /* 206 * Make sure "force link good" is set to normal mode. 207 * It's only intended for debugging. 208 */ 209 reg |= PCR_FLINK100; 210 211 /* 212 * Mystery bits which are supposedly `reserved', 213 * but we seem to need to set them when the PHY 214 * is connected to some interfaces: 215 * 216 * 0x0400 is needed for fxp 217 * (Intel EtherExpress Pro 10+/100B, 82557 chip) 218 * (nsphy with a DP83840 chip) 219 * 0x0100 may be needed for some other card 220 */ 221 reg |= 0x0100 | 0x0400; 222 223 PHY_WRITE(sc, MII_NSPHY_PCR, reg); 224 225 mii_phy_setmedia(sc); 226 break; 227 228 case MII_TICK: 229 /* 230 * If we're not currently selected, just return. 231 */ 232 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 233 return (0); 234 235 if (mii_phy_tick(sc) == EJUSTRETURN) 236 return (0); 237 break; 238 239 case MII_DOWN: 240 mii_phy_down(sc); 241 return (0); 242 } 243 244 /* Update the media status. */ 245 mii_phy_status(sc); 246 247 /* Callback if something changed. */ 248 mii_phy_update(sc, cmd); 249 return (0); 250 } 251 252 void 253 nsphy_status(struct mii_softc *sc) 254 { 255 struct mii_data *mii = sc->mii_pdata; 256 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 257 int bmsr, bmcr, par, anlpar; 258 259 mii->mii_media_status = IFM_AVALID; 260 mii->mii_media_active = IFM_ETHER; 261 262 bmsr = PHY_READ(sc, MII_BMSR) | 263 PHY_READ(sc, MII_BMSR); 264 if (bmsr & BMSR_LINK) 265 mii->mii_media_status |= IFM_ACTIVE; 266 267 bmcr = PHY_READ(sc, MII_BMCR); 268 if (bmcr & BMCR_ISO) { 269 mii->mii_media_active |= IFM_NONE; 270 mii->mii_media_status = 0; 271 return; 272 } 273 274 if (bmcr & BMCR_LOOP) 275 mii->mii_media_active |= IFM_LOOP; 276 277 if (bmcr & BMCR_AUTOEN) { 278 /* 279 * The PAR status bits are only valid of autonegotiation 280 * has completed (or it's disabled). 281 */ 282 if ((bmsr & BMSR_ACOMP) == 0) { 283 /* Erg, still trying, I guess... */ 284 mii->mii_media_active |= IFM_NONE; 285 return; 286 } 287 288 /* 289 * Argh. The PAR doesn't seem to indicate duplex mode 290 * properly! Determine media based on link partner's 291 * advertised capabilities. 292 */ 293 if (PHY_READ(sc, MII_ANER) & ANER_LPAN) { 294 anlpar = PHY_READ(sc, MII_ANAR) & 295 PHY_READ(sc, MII_ANLPAR); 296 if (anlpar & ANLPAR_T4) 297 mii->mii_media_active |= IFM_100_T4; 298 else if (anlpar & ANLPAR_TX_FD) 299 mii->mii_media_active |= IFM_100_TX|IFM_FDX; 300 else if (anlpar & ANLPAR_TX) 301 mii->mii_media_active |= IFM_100_TX; 302 else if (anlpar & ANLPAR_10_FD) 303 mii->mii_media_active |= IFM_10_T|IFM_FDX; 304 else if (anlpar & ANLPAR_10) 305 mii->mii_media_active |= IFM_10_T; 306 else 307 mii->mii_media_active |= IFM_NONE; 308 return; 309 } 310 311 /* 312 * Link partner is not capable of autonegotiation. 313 * We will never be in full-duplex mode if this is 314 * the case, so reading the PAR is OK. 315 */ 316 par = PHY_READ(sc, MII_NSPHY_PAR); 317 if (par & PAR_10) 318 mii->mii_media_active |= IFM_10_T; 319 else 320 mii->mii_media_active |= IFM_100_TX; 321 #if 0 322 if (par & PAR_FDX) 323 mii->mii_media_active |= IFM_FDX; 324 #endif 325 } else 326 mii->mii_media_active = ife->ifm_media; 327 } 328