1 /* $NetBSD: nsphy.c,v 1.31 2001/06/02 21:39:40 thorpej Exp $ */ 2 3 /*- 4 * Copyright (c) 1998, 1999, 2000 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 9 * NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. All advertising materials mentioning features or use of this software 20 * must display the following acknowledgement: 21 * This product includes software developed by the NetBSD 22 * Foundation, Inc. and its contributors. 23 * 4. Neither the name of The NetBSD Foundation nor the names of its 24 * contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGE. 38 */ 39 40 /* 41 * Copyright (c) 1997 Manuel Bouyer. All rights reserved. 42 * 43 * Redistribution and use in source and binary forms, with or without 44 * modification, are permitted provided that the following conditions 45 * are met: 46 * 1. Redistributions of source code must retain the above copyright 47 * notice, this list of conditions and the following disclaimer. 48 * 2. Redistributions in binary form must reproduce the above copyright 49 * notice, this list of conditions and the following disclaimer in the 50 * documentation and/or other materials provided with the distribution. 51 * 3. All advertising materials mentioning features or use of this software 52 * must display the following acknowledgement: 53 * This product includes software developed by Manuel Bouyer. 54 * 4. The name of the author may not be used to endorse or promote products 55 * derived from this software without specific prior written permission. 56 * 57 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 58 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 59 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 60 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 61 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 62 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 63 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 64 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 65 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 66 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 67 */ 68 69 /* 70 * driver for National Semiconductor's DP83840A ethernet 10/100 PHY 71 * Data Sheet available from www.national.com 72 */ 73 74 #include <sys/param.h> 75 #include <sys/systm.h> 76 #include <sys/kernel.h> 77 #include <sys/device.h> 78 #include <sys/malloc.h> 79 #include <sys/socket.h> 80 #include <sys/errno.h> 81 82 #include <net/if.h> 83 #include <net/if_media.h> 84 85 #include <dev/mii/mii.h> 86 #include <dev/mii/miivar.h> 87 #include <dev/mii/miidevs.h> 88 89 #include <dev/mii/nsphyreg.h> 90 91 int nsphymatch __P((struct device *, struct cfdata *, void *)); 92 void nsphyattach __P((struct device *, struct device *, void *)); 93 94 struct cfattach nsphy_ca = { 95 sizeof(struct mii_softc), nsphymatch, nsphyattach, mii_phy_detach, 96 mii_phy_activate 97 }; 98 99 int nsphy_service __P((struct mii_softc *, struct mii_data *, int)); 100 void nsphy_status __P((struct mii_softc *)); 101 102 const struct mii_phy_funcs nsphy_funcs = { 103 nsphy_service, nsphy_status, mii_phy_reset, 104 }; 105 106 const struct mii_phydesc nsphys[] = { 107 { MII_OUI_xxNATSEMI, MII_MODEL_xxNATSEMI_DP83840, 108 MII_STR_xxNATSEMI_DP83840 }, 109 110 { 0, 0, 111 NULL }, 112 }; 113 114 int 115 nsphymatch(parent, match, aux) 116 struct device *parent; 117 struct cfdata *match; 118 void *aux; 119 { 120 struct mii_attach_args *ma = aux; 121 122 if (mii_phy_match(ma, nsphys) != NULL) 123 return (10); 124 125 return (0); 126 } 127 128 void 129 nsphyattach(parent, self, aux) 130 struct device *parent, *self; 131 void *aux; 132 { 133 struct mii_softc *sc = (struct mii_softc *)self; 134 struct mii_attach_args *ma = aux; 135 struct mii_data *mii = ma->mii_data; 136 const struct mii_phydesc *mpd; 137 138 mpd = mii_phy_match(ma, nsphys); 139 printf(": %s, rev. %d\n", mpd->mpd_name, MII_REV(ma->mii_id2)); 140 141 sc->mii_inst = mii->mii_instance; 142 sc->mii_phy = ma->mii_phyno; 143 sc->mii_funcs = &nsphy_funcs; 144 sc->mii_pdata = mii; 145 sc->mii_flags = mii->mii_flags; 146 sc->mii_anegticks = 5; 147 148 PHY_RESET(sc); 149 150 sc->mii_capabilities = 151 PHY_READ(sc, MII_BMSR) & ma->mii_capmask; 152 printf("%s: ", sc->mii_dev.dv_xname); 153 if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0) 154 printf("no media present"); 155 else 156 mii_phy_add_media(sc); 157 printf("\n"); 158 } 159 160 int 161 nsphy_service(sc, mii, cmd) 162 struct mii_softc *sc; 163 struct mii_data *mii; 164 int cmd; 165 { 166 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 167 int reg; 168 169 if ((sc->mii_dev.dv_flags & DVF_ACTIVE) == 0) 170 return (ENXIO); 171 172 switch (cmd) { 173 case MII_POLLSTAT: 174 /* 175 * If we're not polling our PHY instance, just return. 176 */ 177 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 178 return (0); 179 break; 180 181 case MII_MEDIACHG: 182 /* 183 * If the media indicates a different PHY instance, 184 * isolate ourselves. 185 */ 186 if (IFM_INST(ife->ifm_media) != sc->mii_inst) { 187 reg = PHY_READ(sc, MII_BMCR); 188 PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO); 189 return (0); 190 } 191 192 /* 193 * If the interface is not up, don't do anything. 194 */ 195 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 196 break; 197 198 reg = PHY_READ(sc, MII_NSPHY_PCR); 199 200 /* 201 * Set up the PCR to use LED4 to indicate full-duplex 202 * in both 10baseT and 100baseTX modes. 203 */ 204 reg |= PCR_LED4MODE; 205 206 /* 207 * Make sure Carrier Intgrity Monitor function is 208 * disabled (normal for Node operation, but sometimes 209 * it's not set?!) 210 */ 211 reg |= PCR_CIMDIS; 212 213 /* 214 * Make sure "force link good" is set to normal mode. 215 * It's only intended for debugging. 216 */ 217 reg |= PCR_FLINK100; 218 219 /* 220 * Mystery bits which are supposedly `reserved', 221 * but we seem to need to set them when the PHY 222 * is connected to some interfaces: 223 * 224 * 0x0400 is needed for fxp 225 * (Intel EtherExpress Pro 10+/100B, 82557 chip) 226 * (nsphy with a DP83840 chip) 227 * 0x0100 may be needed for some other card 228 */ 229 reg |= 0x0100 | 0x0400; 230 231 PHY_WRITE(sc, MII_NSPHY_PCR, reg); 232 233 mii_phy_setmedia(sc); 234 break; 235 236 case MII_TICK: 237 /* 238 * If we're not currently selected, just return. 239 */ 240 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 241 return (0); 242 243 if (mii_phy_tick(sc) == EJUSTRETURN) 244 return (0); 245 break; 246 247 case MII_DOWN: 248 mii_phy_down(sc); 249 return (0); 250 } 251 252 /* Update the media status. */ 253 mii_phy_status(sc); 254 255 /* Callback if something changed. */ 256 mii_phy_update(sc, cmd); 257 return (0); 258 } 259 260 void 261 nsphy_status(sc) 262 struct mii_softc *sc; 263 { 264 struct mii_data *mii = sc->mii_pdata; 265 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 266 int bmsr, bmcr, par, anlpar; 267 268 mii->mii_media_status = IFM_AVALID; 269 mii->mii_media_active = IFM_ETHER; 270 271 bmsr = PHY_READ(sc, MII_BMSR) | 272 PHY_READ(sc, MII_BMSR); 273 if (bmsr & BMSR_LINK) 274 mii->mii_media_status |= IFM_ACTIVE; 275 276 bmcr = PHY_READ(sc, MII_BMCR); 277 if (bmcr & BMCR_ISO) { 278 mii->mii_media_active |= IFM_NONE; 279 mii->mii_media_status = 0; 280 return; 281 } 282 283 if (bmcr & BMCR_LOOP) 284 mii->mii_media_active |= IFM_LOOP; 285 286 if (bmcr & BMCR_AUTOEN) { 287 /* 288 * The PAR status bits are only valid of autonegotiation 289 * has completed (or it's disabled). 290 */ 291 if ((bmsr & BMSR_ACOMP) == 0) { 292 /* Erg, still trying, I guess... */ 293 mii->mii_media_active |= IFM_NONE; 294 return; 295 } 296 297 /* 298 * Argh. The PAR doesn't seem to indicate duplex mode 299 * properly! Determine media based on link partner's 300 * advertised capabilities. 301 */ 302 if (PHY_READ(sc, MII_ANER) & ANER_LPAN) { 303 anlpar = PHY_READ(sc, MII_ANAR) & 304 PHY_READ(sc, MII_ANLPAR); 305 if (anlpar & ANLPAR_T4) 306 mii->mii_media_active |= IFM_100_T4; 307 else if (anlpar & ANLPAR_TX_FD) 308 mii->mii_media_active |= IFM_100_TX|IFM_FDX; 309 else if (anlpar & ANLPAR_TX) 310 mii->mii_media_active |= IFM_100_TX; 311 else if (anlpar & ANLPAR_10_FD) 312 mii->mii_media_active |= IFM_10_T|IFM_FDX; 313 else if (anlpar & ANLPAR_10) 314 mii->mii_media_active |= IFM_10_T; 315 else 316 mii->mii_media_active |= IFM_NONE; 317 return; 318 } 319 320 /* 321 * Link partner is not capable of autonegotiation. 322 * We will never be in full-duplex mode if this is 323 * the case, so reading the PAR is OK. 324 */ 325 par = PHY_READ(sc, MII_NSPHY_PAR); 326 if (par & PAR_10) 327 mii->mii_media_active |= IFM_10_T; 328 else 329 mii->mii_media_active |= IFM_100_TX; 330 #if 0 331 if (par & PAR_FDX) 332 mii->mii_media_active |= IFM_FDX; 333 #endif 334 } else 335 mii->mii_media_active = ife->ifm_media; 336 } 337