1 /* $NetBSD: if_elmc_mca.c,v 1.33 2022/07/12 02:06:07 thorpej Exp $ */ 2 3 /*- 4 * Copyright (c) 2001 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Rafal K. Boni and Jaromir Dolecek. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * 3Com 3c523 EtherLink/MC Ethernet card driver (uses i82586 Ethernet chip). 34 * 35 * The 3c523-specific hooks were derived from Linux driver (file 36 * drivers/net/3c523.[ch]). 37 * 38 * This driver uses generic i82586 stuff. See also ai(4), ef(4), ix(4). 39 */ 40 41 #include <sys/cdefs.h> 42 __KERNEL_RCSID(0, "$NetBSD: if_elmc_mca.c,v 1.33 2022/07/12 02:06:07 thorpej Exp $"); 43 44 #include <sys/param.h> 45 #include <sys/systm.h> 46 #include <sys/mbuf.h> 47 #include <sys/errno.h> 48 #include <sys/device.h> 49 #include <sys/protosw.h> 50 #include <sys/socket.h> 51 52 #include <net/if.h> 53 #include <net/if_types.h> 54 #include <net/if_media.h> 55 #include <net/if_ether.h> 56 57 #include <sys/bus.h> 58 59 #include <dev/ic/i82586reg.h> 60 #include <dev/ic/i82586var.h> 61 #include <dev/mca/mcadevs.h> 62 #include <dev/mca/mcavar.h> 63 64 #include <dev/mca/3c523reg.h> 65 66 struct elmc_mca_softc { 67 struct ie_softc sc_ie; 68 69 bus_space_tag_t sc_regt; /* space tag for registers */ 70 bus_space_handle_t sc_regh; /* space handle for registers */ 71 72 void *sc_ih; /* interrupt handle */ 73 }; 74 75 int elmc_mca_match(device_t, cfdata_t, void *); 76 void elmc_mca_attach(device_t, device_t, void *); 77 78 static void elmc_mca_copyin(struct ie_softc *, void *, int, size_t); 79 static void elmc_mca_copyout(struct ie_softc *, const void *, int, size_t); 80 static u_int16_t elmc_mca_read_16(struct ie_softc *, int); 81 static void elmc_mca_write_16(struct ie_softc *, int, u_int16_t); 82 static void elmc_mca_write_24(struct ie_softc *, int, int); 83 static void elmc_mca_attn(struct ie_softc *, int); 84 static void elmc_mca_hwreset(struct ie_softc *, int); 85 static int elmc_mca_intrhook(struct ie_softc *, int); 86 87 int 88 elmc_mca_match(device_t parent, cfdata_t cf, 89 void *aux) 90 { 91 struct mca_attach_args *ma = aux; 92 93 switch (ma->ma_id) { 94 case MCA_PRODUCT_3C523: 95 return 1; 96 } 97 98 return 0; 99 } 100 101 void 102 elmc_mca_attach(device_t parent, device_t self, void *aux) 103 { 104 struct elmc_mca_softc *asc = device_private(self); 105 struct ie_softc *sc = &asc->sc_ie; 106 struct mca_attach_args *ma = aux; 107 int pos2, pos3, i, revision; 108 int iobase, irq, pbram_addr; 109 bus_space_handle_t ioh, memh; 110 u_int8_t myaddr[ETHER_ADDR_LEN]; 111 112 pos2 = mca_conf_read(ma->ma_mc, ma->ma_slot, 2); 113 pos3 = mca_conf_read(ma->ma_mc, ma->ma_slot, 3); 114 115 /* 116 * POS register 2: (adf pos0) 117 * 118 * 7 6 5 4 3 2 1 0 119 * \ \_/ \_/ \__ enable: 0=adapter disabled, 1=adapter enabled 120 * \ \ \____ I/O Address Range: 00=300-307, 01=1300-1307, 121 * \ \ 10=2300-2307, 11=3300-3307 122 * \ \______ Packet Buffer RAM Address Range: 123 * \ 00=0x0c0000-0x0c5fff 01=0x0c8000-0x0cdfff 124 * \ 10=0x0d0000-0x0d5fff 11=0x0d8000-0x0ddfff 125 * \______ Transceiver Type: 0=onboard(BNC) 1=ext(DIX) 126 * 127 * POS register 3: (adf pos1) 128 * 129 * 7 6 5 4 3 2 1 0 130 * \____/ 131 * \__ Interrupt level: 0100=3, 0010=7, 1000=9, 0001=12 132 */ 133 134 iobase = ELMC_IOADDR_BASE + (0x1000 * ((pos2 & 0x6) >> 1)); 135 136 /* get irq */ 137 switch (pos3 & 0x1f) { 138 case 4: irq = 3; break; 139 case 2: irq = 7; break; 140 case 8: irq = 9; break; 141 case 1: irq = 12; break; 142 default: 143 aprint_error(": cannot determine irq\n"); 144 return; 145 } 146 147 sc->sc_dev = self; 148 pbram_addr = ELMC_MADDR_BASE + (((pos2 & 0x18) >> 3) * 0x8000); 149 150 aprint_normal(" slot %d irq %d: 3Com EtherLink/MC Ethernet Adapter " 151 "(3C523)\n", ma->ma_slot + 1, irq); 152 153 /* map the pio registers */ 154 if (bus_space_map(ma->ma_iot, iobase, ELMC_IOADDR_SIZE, 0, &ioh)) { 155 aprint_error_dev(self, "unable to map i/o space\n"); 156 return; 157 } 158 159 /* 160 * 3c523 has a 24K memory. The first 16K is the shared memory, while 161 * the last 8K is for the EtherStart BIOS ROM, which we don't care 162 * about. Just use the first 16K. 163 */ 164 if (bus_space_map(ma->ma_memt, pbram_addr, ELMC_MADDR_SIZE, 0, &memh)) { 165 aprint_error_dev(self, "unable to map memory space\n"); 166 if (pbram_addr == 0xc0000) { 167 aprint_error_dev(self, 168 "memory space 0xc0000 may conflict with vga\n"); 169 } 170 171 bus_space_unmap(ma->ma_iot, ioh, ELMC_IOADDR_SIZE); 172 return; 173 } 174 175 asc->sc_regt = ma->ma_iot; 176 asc->sc_regh = ioh; 177 178 sc->hwinit = NULL; 179 sc->intrhook = elmc_mca_intrhook; 180 sc->hwreset = elmc_mca_hwreset; 181 sc->chan_attn = elmc_mca_attn; 182 183 sc->ie_bus_barrier = NULL; 184 185 sc->memcopyin = elmc_mca_copyin; 186 sc->memcopyout = elmc_mca_copyout; 187 sc->ie_bus_read16 = elmc_mca_read_16; 188 sc->ie_bus_write16 = elmc_mca_write_16; 189 sc->ie_bus_write24 = elmc_mca_write_24; 190 191 sc->do_xmitnopchain = 0; 192 193 sc->sc_mediachange = NULL; 194 sc->sc_mediastatus = NULL; 195 196 sc->bt = ma->ma_memt; 197 sc->bh = memh; 198 199 /* Map i/o space. */ 200 sc->sc_msize = ELMC_MADDR_SIZE; 201 sc->sc_maddr = (void *)memh; 202 sc->sc_iobase = (char *)sc->sc_maddr + sc->sc_msize - (1 << 24); 203 204 /* set up pointers to important on-card control structures */ 205 sc->iscp = 0; 206 sc->scb = IE_ISCP_SZ; 207 sc->scp = sc->sc_msize + IE_SCP_ADDR - (1 << 24); 208 209 sc->buf_area = sc->scb + IE_SCB_SZ; 210 sc->buf_area_sz = sc->sc_msize - IE_ISCP_SZ - IE_SCB_SZ - IE_SCP_SZ; 211 212 /* 213 * According to docs, we might need to read the interrupt number and 214 * write it back to the IRQ select register, since the POST might not 215 * configure the IRQ properly. 216 */ 217 (void) mca_conf_write(ma->ma_mc, ma->ma_slot, 3, pos3 & 0x1f); 218 219 /* reset the card first */ 220 elmc_mca_hwreset(sc, CARD_RESET); 221 delay(1000000 / ( 1<< 5)); 222 223 /* zero card memory */ 224 bus_space_set_region_1(sc->bt, sc->bh, 0, 0, sc->sc_msize); 225 226 /* set card to 16-bit bus mode */ 227 bus_space_write_1(sc->bt, sc->bh, IE_SCP_BUS_USE((u_long)sc->scp), 228 IE_SYSBUS_16BIT); 229 230 /* set up pointers to key structures */ 231 elmc_mca_write_24(sc, IE_SCP_ISCP((u_long)sc->scp), (u_long) sc->iscp); 232 elmc_mca_write_16(sc, IE_ISCP_SCB((u_long)sc->iscp), (u_long) sc->scb); 233 elmc_mca_write_24(sc, IE_ISCP_BASE((u_long)sc->iscp), 234 (u_long) sc->iscp); 235 236 /* flush setup of pointers, check if chip answers */ 237 if (!i82586_proberam(sc)) { 238 aprint_error_dev(self, "can't talk to i82586!\n"); 239 240 bus_space_unmap(asc->sc_regt, asc->sc_regh, ELMC_IOADDR_SIZE); 241 bus_space_unmap(sc->bt, sc->bh, ELMC_MADDR_SIZE); 242 return; 243 } 244 245 /* revision is stored in the first 4 bits of the revision register */ 246 revision = (int) bus_space_read_1(asc->sc_regt, asc->sc_regh, 247 ELMC_REVISION) & ELMC_REVISION_MASK; 248 249 /* dump known info */ 250 aprint_normal("%s: rev %d, i/o %#04x-%#04x, mem %#06x-%#06x, " 251 "%sternal xcvr\n", 252 device_xname(self), revision, 253 iobase, iobase + ELMC_IOADDR_SIZE - 1, 254 pbram_addr, pbram_addr + ELMC_MADDR_SIZE - 1, 255 (pos2 & 0x20) ? "ex" : "in"); 256 257 /* 258 * Hardware ethernet address is stored in the first six bytes 259 * of the IO space. 260 */ 261 for(i=0; i < MIN(6, ETHER_ADDR_LEN); i++) 262 myaddr[i] = bus_space_read_1(asc->sc_regt, asc->sc_regh, i); 263 264 printf("%s:", device_xname(self)); 265 i82586_attach(sc, "3C523", myaddr, NULL, 0, 0); 266 267 /* establish interrupt handler */ 268 asc->sc_ih = mca_intr_establish(ma->ma_mc, irq, IPL_NET, i82586_intr, 269 sc); 270 if (asc->sc_ih == NULL) { 271 aprint_error_dev(self, 272 "couldn't establish interrupt handler\n"); 273 return; 274 } 275 } 276 277 static void 278 elmc_mca_copyin (struct ie_softc *sc, void *dst, int offset, size_t size) 279 { 280 int dribble; 281 u_int8_t* bptr = dst; 282 283 if (offset % 2) { 284 *bptr = bus_space_read_1(sc->bt, sc->bh, offset); 285 offset++; bptr++; size--; 286 } 287 288 dribble = size % 2; 289 bus_space_read_region_2(sc->bt, sc->bh, offset, (u_int16_t *) bptr, 290 size >> 1); 291 292 if (dribble) { 293 bptr += size - 1; 294 offset += size - 1; 295 *bptr = bus_space_read_1(sc->bt, sc->bh, offset); 296 } 297 } 298 299 static void 300 elmc_mca_copyout (struct ie_softc *sc, const void *src, int offset, 301 size_t size) 302 { 303 int dribble; 304 const u_int8_t* bptr = src; 305 306 if (offset % 2) { 307 bus_space_write_1(sc->bt, sc->bh, offset, *bptr); 308 offset++; bptr++; size--; 309 } 310 311 dribble = size % 2; 312 bus_space_write_region_2(sc->bt, sc->bh, offset, 313 (const u_int16_t *)bptr, size >> 1); 314 if (dribble) { 315 bptr += size - 1; 316 offset += size - 1; 317 bus_space_write_1(sc->bt, sc->bh, offset, *bptr); 318 } 319 } 320 321 static u_int16_t 322 elmc_mca_read_16 (struct ie_softc *sc, int offset) 323 { 324 return bus_space_read_2(sc->bt, sc->bh, offset); 325 } 326 327 static void 328 elmc_mca_write_16 (struct ie_softc *sc, int offset, u_int16_t value) 329 { 330 bus_space_write_2(sc->bt, sc->bh, offset, value); 331 } 332 333 static void 334 elmc_mca_write_24 (struct ie_softc *sc, int offset, int addr) 335 { 336 bus_space_write_4(sc->bt, sc->bh, offset, addr + 337 (u_long) sc->sc_maddr - (u_long) sc->sc_iobase); 338 } 339 340 /* 341 * Channel attention hook. 342 */ 343 static void 344 elmc_mca_attn(struct ie_softc *sc, int why) 345 { 346 struct elmc_mca_softc* asc = (struct elmc_mca_softc *) sc; 347 int intr = 0; 348 349 switch (why) { 350 case CHIP_PROBE: 351 intr = 0; 352 break; 353 case CARD_RESET: 354 intr = ELMC_CTRL_INT; 355 break; 356 } 357 358 bus_space_write_1(asc->sc_regt, asc->sc_regh, ELMC_CTRL, 359 ELMC_CTRL_RST | ELMC_CTRL_BS3 | ELMC_CTRL_CHA | intr); 360 delay(1); /* should be > 500 ns */ 361 bus_space_write_1(asc->sc_regt, asc->sc_regh, ELMC_CTRL, 362 ELMC_CTRL_RST | ELMC_CTRL_BS3 | intr); 363 } 364 365 /* 366 * Do full card hardware reset. 367 */ 368 static void 369 elmc_mca_hwreset(struct ie_softc *sc, int why) 370 { 371 struct elmc_mca_softc* asc = (struct elmc_mca_softc *) sc; 372 373 /* toggle the RST bit low then high */ 374 bus_space_write_1(asc->sc_regt, asc->sc_regh, ELMC_CTRL, 375 ELMC_CTRL_BS3 | ELMC_CTRL_LOOP); 376 delay(1); /* should be > 500 ns */ 377 bus_space_write_1(asc->sc_regt, asc->sc_regh, ELMC_CTRL, 378 ELMC_CTRL_BS3 | ELMC_CTRL_LOOP | ELMC_CTRL_RST); 379 380 elmc_mca_attn(sc, why); 381 } 382 383 /* 384 * Interrupt hook. 385 */ 386 static int 387 elmc_mca_intrhook(struct ie_softc *sc, int why) 388 { 389 switch (why) { 390 case INTR_ACK: 391 elmc_mca_attn(sc, CHIP_PROBE); 392 break; 393 default: 394 /* do nothing */ 395 break; 396 } 397 398 return (0); 399 } 400 401 CFATTACH_DECL_NEW(elmc_mca, sizeof(struct elmc_mca_softc), 402 elmc_mca_match, elmc_mca_attach, NULL, NULL); 403