1 /* $NetBSD: smsc.c,v 1.12 2015/04/23 23:23:00 pgoyette Exp $ */ 2 3 /*- 4 * Copyright (c) 2007 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Brett Lymn. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * This is a driver for the Standard Microsystems Corp (SMSC) 34 * LPC47B397 "super i/o" chip. This driver only handles the environment 35 * monitoring capabilities of the chip, the other functions will be 36 * probed/matched as "normal" PC hardware devices (serial ports, fdc, so on). 37 * SMSC has not deigned to release a datasheet for this particular chip 38 * (though they do for others they make) so this driver was written from 39 * information contained in the comment block for the Linux driver. 40 */ 41 42 #include <sys/cdefs.h> 43 __KERNEL_RCSID(0, "$NetBSD: smsc.c,v 1.12 2015/04/23 23:23:00 pgoyette Exp $"); 44 45 #include <sys/param.h> 46 #include <sys/systm.h> 47 #include <sys/device.h> 48 #include <sys/module.h> 49 #include <sys/bus.h> 50 51 #include <dev/isa/isareg.h> 52 #include <dev/isa/isavar.h> 53 54 #include <dev/sysmon/sysmonvar.h> 55 #include <dev/isa/smscvar.h> 56 57 #if defined(LMDEBUG) 58 #define DPRINTF(x) do { printf x; } while (0) 59 #else 60 #define DPRINTF(x) 61 #endif 62 63 static int smsc_match(device_t, cfdata_t, void *); 64 static void smsc_attach(device_t, device_t, void *); 65 static int smsc_detach(device_t, int); 66 67 static uint8_t smsc_readreg(bus_space_tag_t, bus_space_handle_t, int); 68 static void smsc_writereg(bus_space_tag_t, bus_space_handle_t, int, int); 69 70 static void smsc_refresh(struct sysmon_envsys *, envsys_data_t *); 71 72 CFATTACH_DECL_NEW(smsc, sizeof(struct smsc_softc), 73 smsc_match, smsc_attach, smsc_detach, NULL); 74 75 /* 76 * Probe for the SMSC Super I/O chip 77 */ 78 static int 79 smsc_match(device_t parent, cfdata_t match, void *aux) 80 { 81 bus_space_handle_t ioh; 82 struct isa_attach_args *ia = aux; 83 int rv; 84 uint8_t cr; 85 86 /* Must supply an address */ 87 if (ia->ia_nio < 1) 88 return 0; 89 90 if (ISA_DIRECT_CONFIG(ia)) 91 return 0; 92 93 if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT) 94 return 0; 95 96 if (bus_space_map(ia->ia_iot, ia->ia_io[0].ir_addr, 2, 0, &ioh)) 97 return 0; 98 99 /* To get the device ID we must enter config mode... */ 100 bus_space_write_1(ia->ia_iot, ioh, SMSC_ADDR, SMSC_CONFIG_START); 101 102 /* Then select the device id register */ 103 cr = smsc_readreg(ia->ia_iot, ioh, SMSC_DEVICE_ID); 104 105 /* Exit config mode, apparently this is important to do */ 106 bus_space_write_1(ia->ia_iot, ioh, SMSC_ADDR, SMSC_CONFIG_END); 107 108 switch (cr) { 109 case SMSC_ID_47B397: 110 case SMSC_ID_SCH5307NS: 111 case SMSC_ID_SCH5317: 112 rv = 1; 113 break; 114 default: 115 rv = 0; 116 break; 117 } 118 119 DPRINTF(("smsc: rv = %d, cr = %x\n", rv, cr)); 120 121 bus_space_unmap(ia->ia_iot, ioh, 2); 122 123 if (rv) { 124 ia->ia_nio = 1; 125 ia->ia_io[0].ir_size = 2; 126 127 ia->ia_niomem = 0; 128 ia->ia_nirq = 0; 129 ia->ia_ndrq = 0; 130 } 131 132 return rv; 133 } 134 135 /* 136 * Get the base address for the monitoring registers and set up the 137 * sysmon_envsys(9) framework. 138 */ 139 static void 140 smsc_attach(device_t parent, device_t self, void *aux) 141 { 142 struct smsc_softc *sc = device_private(self); 143 struct isa_attach_args *ia = aux; 144 bus_space_handle_t ioh; 145 uint8_t rev, msb, lsb, chipid; 146 unsigned address; 147 int i; 148 149 sc->sc_iot = ia->ia_iot; 150 151 aprint_naive("\n"); 152 153 /* 154 * To attach we need to find the actual Hardware Monitor 155 * I/O address space. 156 */ 157 if (bus_space_map(ia->ia_iot, ia->ia_io[0].ir_addr, 2, 0, 158 &ioh)) { 159 aprint_error(": can't map base i/o space\n"); 160 return; 161 } 162 163 /* Enter config mode */ 164 bus_space_write_1(ia->ia_iot, ioh, SMSC_ADDR, SMSC_CONFIG_START); 165 166 /* 167 * While we have the base registers mapped, grab the chip 168 * revision and device ID. 169 */ 170 rev = smsc_readreg(ia->ia_iot, ioh, SMSC_DEVICE_REVISION); 171 chipid = smsc_readreg(ia->ia_iot, ioh, SMSC_DEVICE_ID); 172 173 /* Select the Hardware Monitor LDN */ 174 smsc_writereg(ia->ia_iot, ioh, SMSC_LOGICAL_DEV_SEL, 175 SMSC_LOGICAL_DEVICE); 176 177 /* Read the base address for the registers. */ 178 msb = smsc_readreg(ia->ia_iot, ioh, SMSC_IO_BASE_MSB); 179 lsb = smsc_readreg(ia->ia_iot, ioh, SMSC_IO_BASE_LSB); 180 address = (msb << 8) | lsb; 181 182 /* Exit config mode */ 183 bus_space_write_1(ia->ia_iot, ioh, SMSC_ADDR, SMSC_CONFIG_END); 184 bus_space_unmap(ia->ia_iot, ioh, 2); 185 186 /* Map the Hardware Monitor I/O space. */ 187 if (bus_space_map(ia->ia_iot, address, 2, 0, &sc->sc_ioh)) { 188 aprint_error(": can't map register i/o space\n"); 189 return; 190 } 191 192 sc->sc_sme = sysmon_envsys_create(); 193 194 #define INITSENSOR(index, string, reg, type) \ 195 do { \ 196 strlcpy(sc->sc_sensor[index].desc, string, \ 197 sizeof(sc->sc_sensor[index].desc)); \ 198 sc->sc_sensor[index].units = type; \ 199 sc->sc_regs[index] = reg; \ 200 sc->sc_sensor[index].state = ENVSYS_SVALID; \ 201 } while (/* CONSTCOND */ 0) 202 203 /* Temperature sensors */ 204 INITSENSOR(0, "Temp0", SMSC_TEMP1, ENVSYS_STEMP); 205 INITSENSOR(1, "Temp1", SMSC_TEMP2, ENVSYS_STEMP); 206 INITSENSOR(2, "Temp2", SMSC_TEMP3, ENVSYS_STEMP); 207 INITSENSOR(3, "Temp3", SMSC_TEMP4, ENVSYS_STEMP); 208 209 /* Fan sensors */ 210 INITSENSOR(4, "Fan0", SMSC_FAN1_LSB, ENVSYS_SFANRPM); 211 INITSENSOR(5, "Fan1", SMSC_FAN2_LSB, ENVSYS_SFANRPM); 212 INITSENSOR(6, "Fan2", SMSC_FAN3_LSB, ENVSYS_SFANRPM); 213 INITSENSOR(7, "Fan3", SMSC_FAN4_LSB, ENVSYS_SFANRPM); 214 215 for (i = 0; i < SMSC_MAX_SENSORS; i++) { 216 sc->sc_sensor[i].state = ENVSYS_SINVALID; 217 if (sysmon_envsys_sensor_attach(sc->sc_sme, 218 &sc->sc_sensor[i])) { 219 sysmon_envsys_destroy(sc->sc_sme); 220 bus_space_unmap(sc->sc_iot, sc->sc_ioh, 2); 221 return; 222 } 223 } 224 225 sc->sc_sme->sme_name = device_xname(self); 226 sc->sc_sme->sme_cookie = sc; 227 sc->sc_sme->sme_refresh = smsc_refresh; 228 229 if ((i = sysmon_envsys_register(sc->sc_sme)) != 0) { 230 aprint_error(": unable to register with sysmon (%d)\n", i); 231 sysmon_envsys_destroy(sc->sc_sme); 232 bus_space_unmap(sc->sc_iot, sc->sc_ioh, 2); 233 return; 234 } 235 236 switch (chipid) { 237 case SMSC_ID_47B397: 238 aprint_normal(": SMSC LPC47B397 Super I/O"); 239 break; 240 case SMSC_ID_SCH5307NS: 241 aprint_normal(": SMSC SCH5307-NS Super I/O"); 242 break; 243 case SMSC_ID_SCH5317: 244 aprint_normal(": SMSC SCH5317 Super I/O"); 245 break; 246 } 247 248 aprint_normal(" (rev %u)\n", rev); 249 aprint_normal_dev(self, "Hardware Monitor registers at 0x%04x\n", 250 address); 251 } 252 253 static int 254 smsc_detach(device_t self, int flags) 255 { 256 struct smsc_softc *sc = device_private(self); 257 258 sysmon_envsys_unregister(sc->sc_sme); 259 bus_space_unmap(sc->sc_iot, sc->sc_ioh, 2); 260 return 0; 261 } 262 263 /* 264 * Read the value of the given register 265 */ 266 static uint8_t 267 smsc_readreg(bus_space_tag_t iot, bus_space_handle_t ioh, int reg) 268 { 269 bus_space_write_1(iot, ioh, SMSC_ADDR, reg); 270 return bus_space_read_1(iot, ioh, SMSC_DATA); 271 } 272 273 /* 274 * Write the given value to the given register. 275 */ 276 static void 277 smsc_writereg(bus_space_tag_t iot, bus_space_handle_t ioh, int reg, int val) 278 { 279 bus_space_write_1(iot, ioh, SMSC_ADDR, reg); 280 bus_space_write_1(iot, ioh, SMSC_DATA, val); 281 } 282 283 /* convert temperature read from the chip to micro kelvin */ 284 static inline int 285 smsc_temp2muk(uint8_t t) 286 { 287 int temp=t; 288 289 return temp * 1000000 + 273150000U; 290 } 291 292 /* 293 * convert register value read from chip into rpm using: 294 * 295 * RPM = 60/(Count * 11.111us) 296 * 297 * 1/1.1111us = 90kHz 298 * 299 */ 300 static inline int 301 smsc_reg2rpm(unsigned int r) 302 { 303 unsigned long rpm; 304 305 if (r == 0x0) 306 return 0; 307 308 rpm = (90000 * 60) / ((unsigned long) r); 309 return (int) rpm; 310 } 311 312 /* min and max temperatures in uK */ 313 #define SMSC_MIN_TEMP_UK ((-127 * 1000000) + 273150000) 314 #define SMSC_MAX_TEMP_UK ((127 * 1000000) + 273150000) 315 316 /* 317 * Get the data for the requested sensor, update the sysmon structure 318 * with the retrieved value. 319 */ 320 static void 321 smsc_refresh(struct sysmon_envsys *sme, envsys_data_t *edata) 322 { 323 struct smsc_softc *sc = sme->sme_cookie; 324 int reg; 325 unsigned int rpm; 326 uint8_t msb, lsb; 327 328 reg = sc->sc_regs[edata->sensor]; 329 330 switch (edata->units) { 331 case ENVSYS_STEMP: 332 edata->value_cur = 333 smsc_temp2muk(smsc_readreg(sc->sc_iot, sc->sc_ioh, reg)); 334 break; 335 336 case ENVSYS_SFANRPM: 337 /* reading lsb first locks msb... */ 338 lsb = smsc_readreg(sc->sc_iot, sc->sc_ioh, reg); 339 msb = smsc_readreg(sc->sc_iot, sc->sc_ioh, reg + 1); 340 rpm = (msb << 8) | lsb; 341 edata->value_cur = smsc_reg2rpm(rpm); 342 break; 343 } 344 } 345 346 MODULE(MODULE_CLASS_DRIVER, smsc, "sysmon_envsys"); 347 348 #ifdef _MODULE 349 #include "ioconf.c" 350 #endif 351 352 static int 353 smsc_modcmd(modcmd_t cmd, void *opaque) 354 { 355 int error = 0; 356 357 switch (cmd) { 358 case MODULE_CMD_INIT: 359 #ifdef _MODULE 360 error = config_init_component(cfdriver_ioconf_smsc, 361 cfattach_ioconf_smsc, cfdata_ioconf_smsc); 362 #endif 363 return error; 364 case MODULE_CMD_FINI: 365 #ifdef _MODULE 366 error = config_fini_component(cfdriver_ioconf_smsc, 367 cfattach_ioconf_smsc, cfdata_ioconf_smsc); 368 #endif 369 return error; 370 default: 371 return ENOTTY; 372 } 373 } 374