1 /* $NetBSD: lpt_isa.c,v 1.67 2008/05/31 14:07:03 jmcneill Exp $ */ 2 3 /* 4 * Copyright (c) 1993, 1994 Charles M. Hannum. 5 * Copyright (c) 1990 William F. Jolitz, TeleMuse 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. All advertising materials mentioning features or use of this software 17 * must display the following acknowledgement: 18 * This software is a component of "386BSD" developed by 19 * William F. Jolitz, TeleMuse. 20 * 4. Neither the name of the developer nor the name "386BSD" 21 * may be used to endorse or promote products derived from this software 22 * without specific prior written permission. 23 * 24 * THIS SOFTWARE IS A COMPONENT OF 386BSD DEVELOPED BY WILLIAM F. JOLITZ 25 * AND IS INTENDED FOR RESEARCH AND EDUCATIONAL PURPOSES ONLY. THIS 26 * SOFTWARE SHOULD NOT BE CONSIDERED TO BE A COMMERCIAL PRODUCT. 27 * THE DEVELOPER URGES THAT USERS WHO REQUIRE A COMMERCIAL PRODUCT 28 * NOT MAKE USE OF THIS WORK. 29 * 30 * FOR USERS WHO WISH TO UNDERSTAND THE 386BSD SYSTEM DEVELOPED 31 * BY WILLIAM F. JOLITZ, WE RECOMMEND THE USER STUDY WRITTEN 32 * REFERENCES SUCH AS THE "PORTING UNIX TO THE 386" SERIES 33 * (BEGINNING JANUARY 1991 "DR. DOBBS JOURNAL", USA AND BEGINNING 34 * JUNE 1991 "UNIX MAGAZIN", GERMANY) BY WILLIAM F. JOLITZ AND 35 * LYNNE GREER JOLITZ, AS WELL AS OTHER BOOKS ON UNIX AND THE 36 * ON-LINE 386BSD USER MANUAL BEFORE USE. A BOOK DISCUSSING THE INTERNALS 37 * OF 386BSD ENTITLED "386BSD FROM THE INSIDE OUT" WILL BE AVAILABLE LATE 1992. 38 * 39 * THIS SOFTWARE IS PROVIDED BY THE DEVELOPER ``AS IS'' AND 40 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 41 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 42 * ARE DISCLAIMED. IN NO EVENT SHALL THE DEVELOPER BE LIABLE 43 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 44 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 45 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 46 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 47 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 48 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 49 * SUCH DAMAGE. 50 */ 51 52 /* 53 * Device Driver for AT parallel printer port 54 */ 55 56 #include <sys/cdefs.h> 57 __KERNEL_RCSID(0, "$NetBSD: lpt_isa.c,v 1.67 2008/05/31 14:07:03 jmcneill Exp $"); 58 59 #include <sys/param.h> 60 #include <sys/systm.h> 61 #include <sys/proc.h> 62 #include <sys/user.h> 63 #include <sys/buf.h> 64 #include <sys/kernel.h> 65 #include <sys/ioctl.h> 66 #include <sys/uio.h> 67 #include <sys/device.h> 68 #include <sys/syslog.h> 69 70 #include <sys/bus.h> 71 #include <sys/intr.h> 72 73 #include <dev/isa/isavar.h> 74 #include <dev/ic/lptreg.h> 75 #include <dev/ic/lptvar.h> 76 77 #define LPTPRI (PZERO+8) 78 #define LPT_BSIZE 1024 79 80 #ifndef LPTDEBUG 81 #define LPRINTF(a) 82 #else 83 #define LPRINTF(a) if (lpt_isa_debug) printf a 84 int lpt_isa_debug = 0; 85 #endif 86 87 struct lpt_isa_softc { 88 struct lpt_softc sc_lpt; 89 int sc_irq; 90 isa_chipset_tag_t sc_ic; 91 92 }; 93 94 int lpt_isa_probe(device_t, cfdata_t, void *); 95 static void lpt_isa_attach(device_t, device_t, void *); 96 static int lpt_isa_detach(device_t, int); 97 98 CFATTACH_DECL_NEW(lpt_isa, sizeof(struct lpt_isa_softc), 99 lpt_isa_probe, lpt_isa_attach, lpt_isa_detach, NULL); 100 101 int lpt_port_test(bus_space_tag_t, bus_space_handle_t, bus_addr_t, 102 bus_size_t, u_char, u_char); 103 104 /* 105 * Internal routine to lptprobe to do port tests of one byte value. 106 */ 107 int 108 lpt_port_test(bus_space_tag_t iot, bus_space_handle_t ioh, 109 bus_addr_t base, bus_size_t off, u_char data, u_char mask) 110 { 111 int timeout; 112 u_char temp; 113 114 data &= mask; 115 bus_space_write_1(iot, ioh, off, data); 116 timeout = 1000; 117 do { 118 delay(10); 119 temp = bus_space_read_1(iot, ioh, off) & mask; 120 } while (temp != data && --timeout); 121 LPRINTF(("lpt: port=0x%x out=0x%x in=0x%x timeout=%d\n", 122 (unsigned)(base + off), (unsigned)data, (unsigned)temp, timeout)); 123 return (temp == data); 124 } 125 126 /* 127 * Logic: 128 * 1) You should be able to write to and read back the same value 129 * to the data port. Do an alternating zeros, alternating ones, 130 * walking zero, and walking one test to check for stuck bits. 131 * 132 * 2) You should be able to write to and read back the same value 133 * to the control port lower 5 bits, the upper 3 bits are reserved 134 * per the IBM PC technical reference manauls and different boards 135 * do different things with them. Do an alternating zeros, alternating 136 * ones, walking zero, and walking one test to check for stuck bits. 137 * 138 * Some printers drag the strobe line down when the are powered off 139 * so this bit has been masked out of the control port test. 140 * 141 * XXX Some printers may not like a fast pulse on init or strobe, I 142 * don't know at this point, if that becomes a problem these bits 143 * should be turned off in the mask byte for the control port test. 144 * 145 * 3) Set the data and control ports to a value of 0 146 */ 147 int 148 lpt_isa_probe(device_t parent, cfdata_t match, void *aux) 149 { 150 struct isa_attach_args *ia = aux; 151 bus_space_tag_t iot; 152 bus_space_handle_t ioh; 153 u_long base; 154 u_char mask, data; 155 int i, rv; 156 157 #ifdef LPT_DEBUG 158 #define ABORT do {printf("lptprobe: mask %x data %x failed\n", mask, data); \ 159 goto out;} while (0) 160 #else 161 #define ABORT goto out 162 #endif 163 164 if (ia->ia_nio < 1) 165 return (0); 166 167 if (ISA_DIRECT_CONFIG(ia)) 168 return (0); 169 170 /* Disallow wildcarded i/o address. */ 171 if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT) 172 return (0); 173 174 iot = ia->ia_iot; 175 base = ia->ia_io[0].ir_addr; 176 if (bus_space_map(iot, base, LPT_NPORTS, 0, &ioh)) 177 return 0; 178 179 rv = 0; 180 mask = 0xff; 181 182 data = 0x55; /* Alternating zeros */ 183 if (!lpt_port_test(iot, ioh, base, lpt_data, data, mask)) 184 ABORT; 185 186 data = 0xaa; /* Alternating ones */ 187 if (!lpt_port_test(iot, ioh, base, lpt_data, data, mask)) 188 ABORT; 189 190 for (i = 0; i < CHAR_BIT; i++) { /* Walking zero */ 191 data = ~(1 << i); 192 if (!lpt_port_test(iot, ioh, base, lpt_data, data, mask)) 193 ABORT; 194 } 195 196 for (i = 0; i < CHAR_BIT; i++) { /* Walking one */ 197 data = (1 << i); 198 if (!lpt_port_test(iot, ioh, base, lpt_data, data, mask)) 199 ABORT; 200 } 201 202 bus_space_write_1(iot, ioh, lpt_data, 0); 203 bus_space_write_1(iot, ioh, lpt_control, 0); 204 205 ia->ia_io[0].ir_size = LPT_NPORTS; 206 207 ia->ia_niomem = 0; 208 ia->ia_ndrq = 0; 209 210 rv = 1; 211 212 out: 213 bus_space_unmap(iot, ioh, LPT_NPORTS); 214 return rv; 215 } 216 217 void 218 lpt_isa_attach(device_t parent, device_t self, void *aux) 219 { 220 struct lpt_isa_softc *sc = device_private(self); 221 struct lpt_softc *lsc = &sc->sc_lpt; 222 struct isa_attach_args *ia = aux; 223 bus_space_tag_t iot; 224 bus_space_handle_t ioh; 225 226 lsc->sc_dev = self; 227 228 if (ia->ia_nirq < 1 || 229 ia->ia_irq[0].ir_irq == ISA_UNKNOWN_IRQ) { 230 sc->sc_irq = -1; 231 aprint_normal(": polled\n"); 232 } else { 233 sc->sc_irq = ia->ia_irq[0].ir_irq; 234 aprint_normal("\n"); 235 } 236 237 if (!pmf_device_register(self, NULL, NULL)) 238 aprint_error_dev(self, "couldn't establish power handler\n"); 239 240 iot = lsc->sc_iot = ia->ia_iot; 241 if (bus_space_map(iot, ia->ia_io[0].ir_addr, LPT_NPORTS, 0, &ioh)) { 242 aprint_normal_dev(self, "can't map i/o space\n"); 243 return; 244 } 245 lsc->sc_ioh = ioh; 246 247 lpt_attach_subr(lsc); 248 249 sc->sc_ic = ia->ia_ic; 250 if (sc->sc_irq != -1) 251 lsc->sc_ih = isa_intr_establish(sc->sc_ic, sc->sc_irq, 252 IST_EDGE, IPL_TTY, lptintr, lsc); 253 } 254 255 static int 256 lpt_isa_detach(device_t self, int flags) 257 { 258 int rc; 259 struct lpt_isa_softc *sc = device_private(self); 260 struct lpt_softc *lsc = &sc->sc_lpt; 261 262 if ((rc = lpt_detach_subr(self, flags)) != 0) 263 return rc; 264 265 if (sc->sc_irq != -1) 266 isa_intr_disestablish(sc->sc_ic, lsc->sc_ih); 267 268 bus_space_unmap(lsc->sc_iot, lsc->sc_ioh, LPT_NPORTS); 269 return 0; 270 } 271