xref: /netbsd-src/sys/dev/isa/if_cs_isa.c (revision 3b01aba77a7a698587faaae455bbfe740923c1f5)
1 /*	$NetBSD: if_cs_isa.c,v 1.3 2000/12/26 09:42:21 mycroft Exp $	*/
2 
3 /*
4  * Copyright 1997
5  * Digital Equipment Corporation. All rights reserved.
6  *
7  * This software is furnished under license and may be used and
8  * copied only in accordance with the following terms and conditions.
9  * Subject to these conditions, you may download, copy, install,
10  * use, modify and distribute this software in source and/or binary
11  * form. No title or ownership is transferred hereby.
12  *
13  * 1) Any source code used, modified or distributed must reproduce
14  *    and retain this copyright notice and list of conditions as
15  *    they appear in the source file.
16  *
17  * 2) No right is granted to use any trade name, trademark, or logo of
18  *    Digital Equipment Corporation. Neither the "Digital Equipment
19  *    Corporation" name nor any trademark or logo of Digital Equipment
20  *    Corporation may be used to endorse or promote products derived
21  *    from this software without the prior written permission of
22  *    Digital Equipment Corporation.
23  *
24  * 3) This software is provided "AS-IS" and any express or implied
25  *    warranties, including but not limited to, any implied warranties
26  *    of merchantability, fitness for a particular purpose, or
27  *    non-infringement are disclaimed. In no event shall DIGITAL be
28  *    liable for any damages whatsoever, and in particular, DIGITAL
29  *    shall not be liable for special, indirect, consequential, or
30  *    incidental damages or damages for lost profits, loss of
31  *    revenue or loss of use, whether such damages arise in contract,
32  *    negligence, tort, under statute, in equity, at law or otherwise,
33  *    even if advised of the possibility of such damage.
34  */
35 
36 #include <sys/param.h>
37 #include <sys/systm.h>
38 #include <sys/socket.h>
39 #include <sys/device.h>
40 
41 #include "rnd.h"
42 #if NRND > 0
43 #include <sys/rnd.h>
44 #endif
45 
46 #include <net/if.h>
47 #include <net/if_ether.h>
48 #include <net/if_media.h>
49 
50 #include <machine/bus.h>
51 #include <machine/intr.h>
52 
53 #include <dev/isa/isareg.h>
54 #include <dev/isa/isavar.h>
55 #include <dev/isa/isadmavar.h>
56 
57 #include <dev/isa/cs89x0reg.h>
58 #include <dev/isa/cs89x0var.h>
59 
60 int	cs_isa_probe __P((struct device *, struct cfdata *, void *));
61 void	cs_isa_attach __P((struct device *, struct device *, void *));
62 
63 struct cfattach cs_isa_ca = {
64 	sizeof(struct cs_softc), cs_isa_probe, cs_isa_attach
65 };
66 
67 int
68 cs_isa_probe(parent, cf, aux)
69 	struct device *parent;
70 	struct cfdata *cf;
71 	void *aux;
72 {
73 	struct isa_attach_args *ia = aux;
74 	bus_space_tag_t iot = ia->ia_iot;
75 	bus_space_tag_t memt = ia->ia_memt;
76 	bus_space_handle_t ioh, memh;
77 	int rv = 0, have_io = 0, have_mem = 0;
78 	u_int16_t isa_cfg, isa_membase;
79 	bus_addr_t maddr = ia->ia_maddr;
80 	int irq = ia->ia_irq;
81 
82 	/*
83 	 * Disallow wildcarded I/O base.
84 	 */
85 	if (ia->ia_iobase == ISACF_PORT_DEFAULT)
86 		return (0);
87 
88 	/*
89 	 * Map the I/O space.
90 	 */
91 	if (bus_space_map(ia->ia_iot, ia->ia_iobase, CS8900_IOSIZE, 0, &ioh))
92 		goto out;
93 	have_io = 1;
94 
95 	/* Verify that it's a Crystal product. */
96 	if (CS_READ_PACKET_PAGE_IO(iot, ioh, PKTPG_EISA_NUM) !=
97 	    EISA_NUM_CRYSTAL)
98 		goto out;
99 
100 	/*
101 	 * Verify that it's a supported chip.
102 	 */
103 	switch (CS_READ_PACKET_PAGE_IO(iot, ioh, PKTPG_PRODUCT_ID) &
104 	    PROD_ID_MASK) {
105 	case PROD_ID_CS8900:
106 #ifdef notyet
107 	case PROD_ID_CS8920:
108 	case PROD_ID_CS8920M:
109 #endif
110 		rv = 1;
111 	}
112 
113 	/*
114 	 * If the IRQ or memory address were not specified, read the
115 	 * ISA_CFG EEPROM location.
116 	 */
117 	if (maddr == ISACF_IOMEM_DEFAULT || irq == ISACF_IRQ_DEFAULT) {
118 		if (cs_verify_eeprom(iot, ioh) == CS_ERROR) {
119 			printf("cs_isa_probe: EEPROM bad or missing\n");
120 			goto out;
121 		}
122 		if (cs_read_eeprom(iot, ioh, EEPROM_ISA_CFG, &isa_cfg)
123 		    == CS_ERROR) {
124 			printf("cs_isa_probe: unable to read ISA_CFG\n");
125 			goto out;
126 		}
127 	}
128 
129 	/*
130 	 * If the IRQ wasn't specified, get it from the EEPROM.
131 	 */
132 	if (irq == ISACF_IRQ_DEFAULT) {
133 		irq = isa_cfg & ISA_CFG_IRQ_MASK;
134 		if (irq == 3)
135 			irq = 5;
136 		else
137 			irq += 10;
138 	}
139 
140 	/*
141 	 * If the memory address wasn't specified, get it from the EEPROM.
142 	 */
143 	if (maddr == ISACF_IOMEM_DEFAULT) {
144 		if ((isa_cfg & ISA_CFG_MEM_MODE) == 0) {
145 			/* EEPROM says don't use memory mode. */
146 			goto out;
147 		}
148 		if (cs_read_eeprom(iot, ioh, EEPROM_MEM_BASE, &isa_membase)
149 		    == CS_ERROR) {
150 			printf("cs_isa_probe: unable to read MEM_BASE\n");
151 			goto out;
152 		}
153 
154 		isa_membase &= MEM_BASE_MASK;
155 		maddr = (int)isa_membase << 8;
156 	}
157 
158 	/*
159 	 * We now have a valid mem address; attempt to map it.
160 	 */
161 	if (bus_space_map(ia->ia_memt, maddr, CS8900_MEMSIZE, 0, &memh)) {
162 		/* Can't map it; fall back on i/o-only mode. */
163 		printf("cs_isa_probe: unable to map memory space\n");
164 		maddr = ISACF_IOMEM_DEFAULT;
165 	} else
166 		have_mem = 1;
167 
168  out:
169 	if (have_io)
170 		bus_space_unmap(iot, ioh, CS8900_IOSIZE);
171 	if (have_mem)
172 		bus_space_unmap(memt, memh, CS8900_MEMSIZE);
173 
174 	if (rv) {
175 		ia->ia_iosize = CS8900_IOSIZE;
176 		ia->ia_maddr = maddr;
177 		ia->ia_irq = irq;
178 		if (ia->ia_maddr != ISACF_IOMEM_DEFAULT)
179 			ia->ia_msize = CS8900_MEMSIZE;
180 	}
181 	return (rv);
182 }
183 
184 void
185 cs_isa_attach(parent, self, aux)
186 	struct device *parent, *self;
187 	void *aux;
188 {
189 	struct cs_softc *sc = (struct cs_softc *) self;
190 	struct isa_attach_args *ia = aux;
191 
192 	sc->sc_ic = ia->ia_ic;
193 	sc->sc_iot = ia->ia_iot;
194 	sc->sc_memt = ia->ia_memt;
195 
196 	sc->sc_drq = ia->ia_drq;
197 	sc->sc_irq = ia->ia_irq;
198 
199 	printf("\n");
200 
201 	/*
202 	 * Map the device.
203 	 */
204 	if (bus_space_map(sc->sc_iot, ia->ia_iobase, ia->ia_iosize,
205 	    0, &sc->sc_ioh)) {
206 		printf("%s: unable to map i/o space\n", sc->sc_dev.dv_xname);
207 		return;
208 	}
209 
210 	/*
211 	 * Validate IRQ.
212 	 */
213 	if (CS8900_IRQ_ISVALID(sc->sc_irq) == 0) {
214 		printf("%s: invalid IRQ %d\n", sc->sc_dev.dv_xname, sc->sc_irq);
215 		return;
216 	}
217 
218 	/*
219 	 * Map the memory space if it was specified.  If we can do this,
220 	 * we set ourselves up to use memory mode forever.  Otherwise,
221 	 * we fall back on I/O mode.
222 	 */
223 	if (ia->ia_maddr != ISACF_IOMEM_DEFAULT &&
224 	    ia->ia_msize == CS8900_MEMSIZE &&
225 	    CS8900_MEMBASE_ISVALID(ia->ia_maddr)) {
226 		if (bus_space_map(sc->sc_memt, ia->ia_maddr, ia->ia_msize,
227 		    0, &sc->sc_memh)) {
228 			printf("%s: unable to map memory space\n",
229 			    sc->sc_dev.dv_xname);
230 		} else {
231 			sc->sc_cfgflags |= CFGFLG_MEM_MODE;
232 			sc->sc_pktpgaddr = ia->ia_maddr;
233 		}
234 	}
235 
236 	sc->sc_ih = isa_intr_establish(ia->ia_ic, sc->sc_irq, IST_EDGE,
237 	    IPL_NET, cs_intr, sc);
238 	if (sc->sc_ih == NULL) {
239 		printf("%s: unable to establish interrupt\n",
240 		    sc->sc_dev.dv_xname);
241 		return;
242 	}
243 
244 	cs_attach(sc, NULL, NULL, 0, 0);
245 }
246