xref: /netbsd-src/sys/dev/isa/if_cs_isa.c (revision 06be8101a16cc95f40783b3cb7afd12112103a9a)
1 /*	$NetBSD: if_cs_isa.c,v 1.4 2001/11/13 08:01:16 lukem Exp $	*/
2 
3 /*
4  * Copyright 1997
5  * Digital Equipment Corporation. All rights reserved.
6  *
7  * This software is furnished under license and may be used and
8  * copied only in accordance with the following terms and conditions.
9  * Subject to these conditions, you may download, copy, install,
10  * use, modify and distribute this software in source and/or binary
11  * form. No title or ownership is transferred hereby.
12  *
13  * 1) Any source code used, modified or distributed must reproduce
14  *    and retain this copyright notice and list of conditions as
15  *    they appear in the source file.
16  *
17  * 2) No right is granted to use any trade name, trademark, or logo of
18  *    Digital Equipment Corporation. Neither the "Digital Equipment
19  *    Corporation" name nor any trademark or logo of Digital Equipment
20  *    Corporation may be used to endorse or promote products derived
21  *    from this software without the prior written permission of
22  *    Digital Equipment Corporation.
23  *
24  * 3) This software is provided "AS-IS" and any express or implied
25  *    warranties, including but not limited to, any implied warranties
26  *    of merchantability, fitness for a particular purpose, or
27  *    non-infringement are disclaimed. In no event shall DIGITAL be
28  *    liable for any damages whatsoever, and in particular, DIGITAL
29  *    shall not be liable for special, indirect, consequential, or
30  *    incidental damages or damages for lost profits, loss of
31  *    revenue or loss of use, whether such damages arise in contract,
32  *    negligence, tort, under statute, in equity, at law or otherwise,
33  *    even if advised of the possibility of such damage.
34  */
35 
36 #include <sys/cdefs.h>
37 __KERNEL_RCSID(0, "$NetBSD: if_cs_isa.c,v 1.4 2001/11/13 08:01:16 lukem Exp $");
38 
39 #include <sys/param.h>
40 #include <sys/systm.h>
41 #include <sys/socket.h>
42 #include <sys/device.h>
43 
44 #include "rnd.h"
45 #if NRND > 0
46 #include <sys/rnd.h>
47 #endif
48 
49 #include <net/if.h>
50 #include <net/if_ether.h>
51 #include <net/if_media.h>
52 
53 #include <machine/bus.h>
54 #include <machine/intr.h>
55 
56 #include <dev/isa/isareg.h>
57 #include <dev/isa/isavar.h>
58 #include <dev/isa/isadmavar.h>
59 
60 #include <dev/isa/cs89x0reg.h>
61 #include <dev/isa/cs89x0var.h>
62 
63 int	cs_isa_probe __P((struct device *, struct cfdata *, void *));
64 void	cs_isa_attach __P((struct device *, struct device *, void *));
65 
66 struct cfattach cs_isa_ca = {
67 	sizeof(struct cs_softc), cs_isa_probe, cs_isa_attach
68 };
69 
70 int
71 cs_isa_probe(parent, cf, aux)
72 	struct device *parent;
73 	struct cfdata *cf;
74 	void *aux;
75 {
76 	struct isa_attach_args *ia = aux;
77 	bus_space_tag_t iot = ia->ia_iot;
78 	bus_space_tag_t memt = ia->ia_memt;
79 	bus_space_handle_t ioh, memh;
80 	int rv = 0, have_io = 0, have_mem = 0;
81 	u_int16_t isa_cfg, isa_membase;
82 	bus_addr_t maddr = ia->ia_maddr;
83 	int irq = ia->ia_irq;
84 
85 	/*
86 	 * Disallow wildcarded I/O base.
87 	 */
88 	if (ia->ia_iobase == ISACF_PORT_DEFAULT)
89 		return (0);
90 
91 	/*
92 	 * Map the I/O space.
93 	 */
94 	if (bus_space_map(ia->ia_iot, ia->ia_iobase, CS8900_IOSIZE, 0, &ioh))
95 		goto out;
96 	have_io = 1;
97 
98 	/* Verify that it's a Crystal product. */
99 	if (CS_READ_PACKET_PAGE_IO(iot, ioh, PKTPG_EISA_NUM) !=
100 	    EISA_NUM_CRYSTAL)
101 		goto out;
102 
103 	/*
104 	 * Verify that it's a supported chip.
105 	 */
106 	switch (CS_READ_PACKET_PAGE_IO(iot, ioh, PKTPG_PRODUCT_ID) &
107 	    PROD_ID_MASK) {
108 	case PROD_ID_CS8900:
109 #ifdef notyet
110 	case PROD_ID_CS8920:
111 	case PROD_ID_CS8920M:
112 #endif
113 		rv = 1;
114 	}
115 
116 	/*
117 	 * If the IRQ or memory address were not specified, read the
118 	 * ISA_CFG EEPROM location.
119 	 */
120 	if (maddr == ISACF_IOMEM_DEFAULT || irq == ISACF_IRQ_DEFAULT) {
121 		if (cs_verify_eeprom(iot, ioh) == CS_ERROR) {
122 			printf("cs_isa_probe: EEPROM bad or missing\n");
123 			goto out;
124 		}
125 		if (cs_read_eeprom(iot, ioh, EEPROM_ISA_CFG, &isa_cfg)
126 		    == CS_ERROR) {
127 			printf("cs_isa_probe: unable to read ISA_CFG\n");
128 			goto out;
129 		}
130 	}
131 
132 	/*
133 	 * If the IRQ wasn't specified, get it from the EEPROM.
134 	 */
135 	if (irq == ISACF_IRQ_DEFAULT) {
136 		irq = isa_cfg & ISA_CFG_IRQ_MASK;
137 		if (irq == 3)
138 			irq = 5;
139 		else
140 			irq += 10;
141 	}
142 
143 	/*
144 	 * If the memory address wasn't specified, get it from the EEPROM.
145 	 */
146 	if (maddr == ISACF_IOMEM_DEFAULT) {
147 		if ((isa_cfg & ISA_CFG_MEM_MODE) == 0) {
148 			/* EEPROM says don't use memory mode. */
149 			goto out;
150 		}
151 		if (cs_read_eeprom(iot, ioh, EEPROM_MEM_BASE, &isa_membase)
152 		    == CS_ERROR) {
153 			printf("cs_isa_probe: unable to read MEM_BASE\n");
154 			goto out;
155 		}
156 
157 		isa_membase &= MEM_BASE_MASK;
158 		maddr = (int)isa_membase << 8;
159 	}
160 
161 	/*
162 	 * We now have a valid mem address; attempt to map it.
163 	 */
164 	if (bus_space_map(ia->ia_memt, maddr, CS8900_MEMSIZE, 0, &memh)) {
165 		/* Can't map it; fall back on i/o-only mode. */
166 		printf("cs_isa_probe: unable to map memory space\n");
167 		maddr = ISACF_IOMEM_DEFAULT;
168 	} else
169 		have_mem = 1;
170 
171  out:
172 	if (have_io)
173 		bus_space_unmap(iot, ioh, CS8900_IOSIZE);
174 	if (have_mem)
175 		bus_space_unmap(memt, memh, CS8900_MEMSIZE);
176 
177 	if (rv) {
178 		ia->ia_iosize = CS8900_IOSIZE;
179 		ia->ia_maddr = maddr;
180 		ia->ia_irq = irq;
181 		if (ia->ia_maddr != ISACF_IOMEM_DEFAULT)
182 			ia->ia_msize = CS8900_MEMSIZE;
183 	}
184 	return (rv);
185 }
186 
187 void
188 cs_isa_attach(parent, self, aux)
189 	struct device *parent, *self;
190 	void *aux;
191 {
192 	struct cs_softc *sc = (struct cs_softc *) self;
193 	struct isa_attach_args *ia = aux;
194 
195 	sc->sc_ic = ia->ia_ic;
196 	sc->sc_iot = ia->ia_iot;
197 	sc->sc_memt = ia->ia_memt;
198 
199 	sc->sc_drq = ia->ia_drq;
200 	sc->sc_irq = ia->ia_irq;
201 
202 	printf("\n");
203 
204 	/*
205 	 * Map the device.
206 	 */
207 	if (bus_space_map(sc->sc_iot, ia->ia_iobase, ia->ia_iosize,
208 	    0, &sc->sc_ioh)) {
209 		printf("%s: unable to map i/o space\n", sc->sc_dev.dv_xname);
210 		return;
211 	}
212 
213 	/*
214 	 * Validate IRQ.
215 	 */
216 	if (CS8900_IRQ_ISVALID(sc->sc_irq) == 0) {
217 		printf("%s: invalid IRQ %d\n", sc->sc_dev.dv_xname, sc->sc_irq);
218 		return;
219 	}
220 
221 	/*
222 	 * Map the memory space if it was specified.  If we can do this,
223 	 * we set ourselves up to use memory mode forever.  Otherwise,
224 	 * we fall back on I/O mode.
225 	 */
226 	if (ia->ia_maddr != ISACF_IOMEM_DEFAULT &&
227 	    ia->ia_msize == CS8900_MEMSIZE &&
228 	    CS8900_MEMBASE_ISVALID(ia->ia_maddr)) {
229 		if (bus_space_map(sc->sc_memt, ia->ia_maddr, ia->ia_msize,
230 		    0, &sc->sc_memh)) {
231 			printf("%s: unable to map memory space\n",
232 			    sc->sc_dev.dv_xname);
233 		} else {
234 			sc->sc_cfgflags |= CFGFLG_MEM_MODE;
235 			sc->sc_pktpgaddr = ia->ia_maddr;
236 		}
237 	}
238 
239 	sc->sc_ih = isa_intr_establish(ia->ia_ic, sc->sc_irq, IST_EDGE,
240 	    IPL_NET, cs_intr, sc);
241 	if (sc->sc_ih == NULL) {
242 		printf("%s: unable to establish interrupt\n",
243 		    sc->sc_dev.dv_xname);
244 		return;
245 	}
246 
247 	cs_attach(sc, NULL, NULL, 0, 0);
248 }
249