1 /* $NetBSD: wireg.h,v 1.18 2002/01/21 11:29:23 ichiro Exp $ */ 2 3 /* 4 * Copyright (c) 1997, 1998, 1999 5 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Bill Paul. 18 * 4. Neither the name of the author nor the names of any co-contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 26 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 27 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 28 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 29 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 30 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 31 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 32 * THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 /* 36 * FreeBSD driver ported to NetBSD by Bill Sommerfeld in the back of the 37 * Oslo IETF plenary meeting. 38 */ 39 40 #define WI_TIMEOUT 65536 41 42 #define WI_PORT0 0 43 #define WI_PORT1 1 44 #define WI_PORT2 2 45 #define WI_PORT3 3 46 #define WI_PORT4 4 47 #define WI_PORT5 5 48 49 /* Default port: 0 (only 0 exists on stations) */ 50 #define WI_DEFAULT_PORT (WI_PORT0 << 8) 51 52 /* Default TX rate: 2Mbps, auto fallback */ 53 #define WI_DEFAULT_TX_RATE 3 54 55 /* Default network name: ANY */ 56 /* 57 * [sommerfeld 1999/07/15] Changed from "ANY" to ""; according to Bill Fenner, 58 * ANY is used in MS driver user interfaces, while "" is used over the 59 * wire.. 60 */ 61 #define WI_DEFAULT_NETNAME "" 62 63 #define WI_DEFAULT_AP_DENSITY 1 64 65 #define WI_DEFAULT_RTS_THRESH 2347 66 67 #define WI_DEFAULT_DATALEN 2304 68 69 #define WI_DEFAULT_CREATE_IBSS 0 70 71 #define WI_DEFAULT_PM_ENABLED 0 72 73 #define WI_DEFAULT_MAX_SLEEP 100 74 75 #define WI_DEFAULT_ROAMING 1 76 77 #define WI_DEFAULT_AUTHTYPE 1 78 79 #ifdef __NetBSD__ 80 #define OS_STRING_NAME "NetBSD" 81 #endif 82 #ifdef __FreeBSD__ 83 #define OS_STRING_NAME "FreeBSD" 84 #endif 85 #ifdef __OpenBSD__ 86 #define OS_STRING_NAME "OpenBSD" 87 #endif 88 89 #define WI_DEFAULT_NODENAME OS_STRING_NAME " WaveLAN/IEEE node" 90 91 #define WI_DEFAULT_IBSS OS_STRING_NAME " IBSS" 92 93 #define WI_DEFAULT_CHAN 3 94 95 /* 96 * register space access macros 97 */ 98 #define CSR_WRITE_4(sc, reg, val) \ 99 bus_space_write_4(sc->sc_iot, sc->sc_ioh, \ 100 (sc->sc_pci? reg * 2: reg) , val) 101 #define CSR_WRITE_2(sc, reg, val) \ 102 bus_space_write_2(sc->sc_iot, sc->sc_ioh, \ 103 (sc->sc_pci? reg * 2: reg), val) 104 #define CSR_WRITE_1(sc, reg, val) \ 105 bus_space_write_1(sc->sc_iot, sc->sc_ioh, \ 106 (sc->sc_pci? reg * 2: reg), val) 107 108 #define CSR_READ_4(sc, reg) \ 109 bus_space_read_4(sc->sc_iot, sc->sc_ioh, \ 110 (sc->sc_pci? reg * 2: reg)) 111 #define CSR_READ_2(sc, reg) \ 112 bus_space_read_2(sc->sc_iot, sc->sc_ioh, \ 113 (sc->sc_pci? reg * 2: reg)) 114 #define CSR_READ_1(sc, reg) \ 115 bus_space_read_1(sc->sc_iot, sc->sc_ioh, \ 116 (sc->sc_pci? reg * 2: reg)) 117 118 #ifndef __BUS_SPACE_HAS_STREAM_METHODS 119 #define bus_space_write_stream_2 bus_space_write_2 120 #define bus_space_write_multi_stream_2 bus_space_write_multi_2 121 #define bus_space_read_stream_2 bus_space_read_2 122 #define bus_space_read_multi_stream_2 bus_space_read_multi_2 123 #endif 124 125 #define CSR_WRITE_STREAM_2(sc, reg, val) \ 126 bus_space_write_stream_2(sc->sc_iot, sc->sc_ioh, \ 127 (sc->sc_pci? reg * 2: reg), val) 128 #define CSR_WRITE_MULTI_STREAM_2(sc, reg, val, count) \ 129 bus_space_write_multi_stream_2(sc->sc_iot, sc->sc_ioh, \ 130 (sc->sc_pci? reg * 2: reg), val, count) 131 #define CSR_READ_STREAM_2(sc, reg) \ 132 bus_space_read_stream_2(sc->sc_iot, sc->sc_ioh, \ 133 (sc->sc_pci? reg * 2: reg)) 134 #define CSR_READ_MULTI_STREAM_2(sc, reg, buf, count) \ 135 bus_space_read_multi_stream_2(sc->sc_iot, sc->sc_ioh, \ 136 (sc->sc_pci? reg * 2: reg), buf, count) 137 138 /* 139 * The WaveLAN/IEEE cards contain an 802.11 MAC controller which Lucent 140 * calls 'Hermes.' In typical fashion, getting documentation about this 141 * controller is about as easy as squeezing blood from a stone. Here 142 * is more or less what I know: 143 * 144 * - The Hermes controller is firmware driven, and the host interacts 145 * with the Hermes via a firmware interface, which can change. 146 * 147 * - The Hermes is described in a document called: "Hermes Firmware 148 * WaveLAN/IEEE Station Functions," document #010245, which of course 149 * Lucent will not release without an NDA. 150 * 151 * - Lucent has created a library called HCF (Hardware Control Functions) 152 * though which it wants developers to interact with the card. The HCF 153 * is needlessly complex, ill conceived and badly documented. Actually, 154 * the comments in the HCP code itself aren't bad, but the publically 155 * available manual that comes with it is awful, probably due largely to 156 * the fact that it has been emasculated in order to hide information 157 * that Lucent wants to keep proprietary. The purpose of the HCF seems 158 * to be to insulate the driver programmer from the Hermes itself so that 159 * Lucent has an excuse not to release programming in for it. 160 * 161 * - Lucent only makes available documentation and code for 'HCF Light' 162 * which is a stripped down version of HCF with certain features not 163 * implemented, most notably support for 802.11 frames. 164 * 165 * - The HCF code which I have seen blows goats. Whoever decided to 166 * use a 132 column format should be shot. 167 * 168 * Rather than actually use the Lucent HCF library, I have stripped all 169 * the useful information from it and used it to create a driver in the 170 * usual BSD form. Note: I don't want to hear anybody whining about the 171 * fact that the Lucent code is GPLed and mine isn't. I did not actually 172 * put any of Lucent's code in this driver: I only used it as a reference 173 * to obtain information about the underlying hardware. The Hermes 174 * programming interface is not GPLed, so bite me. 175 */ 176 177 /* 178 * Size of Hermes & Prism2 I/O space. 179 */ 180 #define WI_IOSIZE 0x40 181 #define WI_PCI_CBMA 0x10 /* Configuration Base Memory Address */ 182 183 /* 184 * Hermes & Prism2 register definitions 185 */ 186 187 /* Hermes command/status registers. */ 188 #define WI_COMMAND 0x00 189 #define WI_PARAM0 0x02 190 #define WI_PARAM1 0x04 191 #define WI_PARAM2 0x06 192 #define WI_STATUS 0x08 193 #define WI_RESP0 0x0A 194 #define WI_RESP1 0x0C 195 #define WI_RESP2 0x0E 196 197 /* Command register values. */ 198 #define WI_CMD_BUSY 0x8000 /* busy bit */ 199 #define WI_CMD_INI 0x0000 /* initialize */ 200 #define WI_CMD_ENABLE 0x0001 /* enable */ 201 #define WI_CMD_DISABLE 0x0002 /* disable */ 202 #define WI_CMD_DIAG 0x0003 203 #define WI_CMD_ALLOC_MEM 0x000A /* allocate NIC memory */ 204 #define WI_CMD_TX 0x000B /* transmit */ 205 #define WI_CMD_NOTIFY 0x0010 206 #define WI_CMD_INQUIRE 0x0011 207 #define WI_CMD_ACCESS 0x0021 208 #define WI_CMD_PROGRAM 0x0022 209 210 #define WI_CMD_CODE_MASK 0x003F 211 212 /* 213 * Reclaim qualifier bit, applicable to the 214 * TX and INQUIRE commands. 215 */ 216 #define WI_RECLAIM 0x0100 /* reclaim NIC memory */ 217 218 /* 219 * ACCESS command qualifier bits. 220 */ 221 #define WI_ACCESS_READ 0x0000 222 #define WI_ACCESS_WRITE 0x0100 223 224 /* 225 * PROGRAM command qualifier bits. 226 */ 227 #define WI_PROGRAM_DISABLE 0x0000 228 #define WI_PROGRAM_ENABLE_RAM 0x0100 229 #define WI_PROGRAM_ENABLE_NVRAM 0x0200 230 #define WI_PROGRAM_NVRAM 0x0300 231 232 /* Status register values */ 233 #define WI_STAT_CMD_CODE 0x003F 234 #define WI_STAT_DIAG_ERR 0x0100 235 #define WI_STAT_INQ_ERR 0x0500 236 #define WI_STAT_CMD_RESULT 0x7F00 237 238 /* memory handle management registers */ 239 #define WI_INFO_FID 0x10 240 #define WI_RX_FID 0x20 241 #define WI_ALLOC_FID 0x22 242 #define WI_TX_CMP_FID 0x24 243 244 /* 245 * Buffer Access Path (BAP) registers. 246 * These are I/O channels. I believe you can use each one for 247 * any desired purpose independently of the other. In general 248 * though, we use BAP1 for reading and writing LTV records and 249 * reading received data frames, and BAP0 for writing transmit 250 * frames. This is a convention though, not a rule. 251 */ 252 #define WI_SEL0 0x18 253 #define WI_SEL1 0x1A 254 #define WI_OFF0 0x1C 255 #define WI_OFF1 0x1E 256 #define WI_DATA0 0x36 257 #define WI_DATA1 0x38 258 #define WI_BAP0 WI_DATA0 259 #define WI_BAP1 WI_DATA1 260 261 #define WI_OFF_BUSY 0x8000 262 #define WI_OFF_ERR 0x4000 263 #define WI_OFF_DATAOFF 0x0FFF 264 265 /* Event registers */ 266 #define WI_EVENT_STAT 0x30 /* Event status */ 267 #define WI_INT_EN 0x32 /* Interrupt enable/disable */ 268 #define WI_EVENT_ACK 0x34 /* Ack event */ 269 270 /* Events */ 271 #define WI_EV_TICK 0x8000 /* aux timer tick */ 272 #define WI_EV_RES 0x4000 /* controller h/w error (time out) */ 273 #define WI_EV_INFO_DROP 0x2000 /* no RAM to build unsolicited frame */ 274 #define WI_EV_NO_CARD 0x0800 /* card removed (hunh?) */ 275 #define WI_EV_DUIF_RX 0x0400 /* wavelan management packet received */ 276 #define WI_EV_INFO 0x0080 /* async info frame */ 277 #define WI_EV_CMD 0x0010 /* command completed */ 278 #define WI_EV_ALLOC 0x0008 /* async alloc/reclaim completed */ 279 #define WI_EV_TX_EXC 0x0004 /* async xmit completed with failure */ 280 #define WI_EV_TX 0x0002 /* async xmit completed succesfully */ 281 #define WI_EV_RX 0x0001 /* async rx completed */ 282 283 #define WI_INTRS \ 284 (WI_EV_RX|WI_EV_TX|WI_EV_TX_EXC|WI_EV_ALLOC|WI_EV_INFO|WI_EV_INFO_DROP) 285 286 /* Host software registers */ 287 #define WI_SW0 0x28 288 #define WI_SW1 0x2A 289 #define WI_SW2 0x2C 290 #define WI_SW3 0x2E /* does not appear in Prism2 */ 291 292 #define WI_CNTL 0x14 293 294 #define WI_CNTL_AUX_ENA 0xC000 295 #define WI_CNTL_AUX_ENA_STAT 0xC000 296 #define WI_CNTL_AUX_DIS_STAT 0x0000 297 #define WI_CNTL_AUX_ENA_CNTL 0x8000 298 #define WI_CNTL_AUX_DIS_CNTL 0x4000 299 300 #define WI_AUX_PAGE 0x3A 301 #define WI_AUX_OFFSET 0x3C 302 #define WI_AUX_DATA 0x3E 303 304 /* 305 * PCI Host Interface Registers (HFA3842 Specific) 306 * The value of all Register's Offset, such as WI_INFO_FID and WI_PARAM0, 307 * has doubled. 308 * About WI_PCI_COR: In this Register, only soft-reset bit implement; Bit(7). 309 */ 310 #define WI_PCI_COR 0x4C 311 #define WI_PCI_HCR 0x5C 312 #define WI_PCI_MASTER0_ADDRH 0x80 313 #define WI_PCI_MASTER0_ADDRL 0x84 314 #define WI_PCI_MASTER0_LEN 0x88 315 #define WI_PCI_MASTER0_CON 0x8C 316 317 #define WI_PCI_STATUS 0x98 318 319 #define WI_PCI_MASTER1_ADDRH 0xA0 320 #define WI_PCI_MASTER1_ADDRL 0xA4 321 #define WI_PCI_MASTER1_LEN 0xA8 322 #define WI_PCI_MASTER1_CON 0xAC 323 324 #define WI_PCI_SOFT_RESET (1 << 7) 325 326 /* 327 * One form of communication with the Hermes is with what Lucent calls 328 * LTV records, where LTV stands for Length, Type and Value. The length 329 * and type are 16 bits and are in native byte order. The value is in 330 * multiples of 16 bits and is in little endian byte order. 331 */ 332 struct wi_ltv_gen { 333 u_int16_t wi_len; 334 u_int16_t wi_type; 335 u_int16_t wi_val; 336 }; 337 338 struct wi_ltv_str { 339 u_int16_t wi_len; 340 u_int16_t wi_type; 341 u_int16_t wi_str[17]; 342 }; 343 344 #define WI_SETVAL(recno, val) \ 345 do { \ 346 struct wi_ltv_gen g; \ 347 \ 348 g.wi_len = 2; \ 349 g.wi_type = recno; \ 350 g.wi_val = htole16(val); \ 351 wi_write_record(sc, &g); \ 352 } while (0) 353 354 #define WI_SETSTR(recno, str) \ 355 do { \ 356 struct wi_ltv_str s; \ 357 int l; \ 358 \ 359 l = (strlen(str) + 1) & ~0x1; \ 360 memset((char *)&s, 0, sizeof(s)); \ 361 s.wi_len = (l / 2) + 2; \ 362 s.wi_type = recno; \ 363 s.wi_str[0] = htole16(strlen(str)); \ 364 memcpy((char *)&s.wi_str[1], str, strlen(str)); \ 365 wi_write_record(sc, (struct wi_ltv_gen *)&s); \ 366 } while (0) 367 368 /* 369 * Download buffer location and length (0xFD01). 370 */ 371 struct wi_ltv_dnld_buf { 372 u_int16_t wi_len; 373 u_int16_t wi_type; 374 u_int16_t wi_buf_pg; /* page addr of intermediate dl buf*/ 375 u_int16_t wi_buf_off; /* offset of idb */ 376 u_int16_t wi_buf_len; /* len of idb */ 377 }; 378 379 /* 380 * Mem sizes (0xFD02). 381 */ 382 struct wi_ltv_memsz { 383 u_int16_t wi_len; 384 u_int16_t wi_type; 385 u_int16_t wi_mem_ram; 386 u_int16_t wi_mem_nvram; 387 }; 388 389 /* 390 * NIC Identification (0xFD0B, 0xFD20) 391 */ 392 struct wi_ltv_ver { 393 u_int16_t wi_len; 394 u_int16_t wi_type; 395 u_int16_t wi_ver[4]; 396 #define WI_NIC_EVB2 0x8000 397 #define WI_NIC_HWB3763 0x8001 398 #define WI_NIC_HWB3163 0x8002 399 #define WI_NIC_HWB3163B 0x8003 400 #define WI_NIC_EVB3 0x8004 401 #define WI_NIC_HWB1153 0x8007 402 #define WI_NIC_P2_SST 0x8008 /* Prism2 with SST flush */ 403 #define WI_NIC_PRISM2_5 0x800C 404 #define WI_NIC_3874A 0x8013 /* Prism2.5 Mini-PCI */ 405 }; 406 407 /* 408 * List of intended regulatory domains (0xFD11). 409 */ 410 struct wi_ltv_domains { 411 u_int16_t wi_len; 412 u_int16_t wi_type; 413 u_int16_t wi_domains[6]; 414 }; 415 416 /* 417 * CIS struct (0xFD13). 418 */ 419 struct wi_ltv_cis { 420 u_int16_t wi_len; 421 u_int16_t wi_type; 422 u_int16_t wi_cis[240]; 423 }; 424 425 /* 426 * Communications quality (0xFD43). 427 */ 428 struct wi_ltv_commqual { 429 u_int16_t wi_len; 430 u_int16_t wi_type; 431 u_int16_t wi_coms_qual; 432 u_int16_t wi_sig_lvl; 433 u_int16_t wi_noise_lvl; 434 }; 435 436 /* 437 * Actual system scale thresholds (0xFC06, 0xFD46). 438 */ 439 struct wi_ltv_scalethresh { 440 u_int16_t wi_len; 441 u_int16_t wi_type; 442 u_int16_t wi_energy_detect; 443 u_int16_t wi_carrier_detect; 444 u_int16_t wi_defer; 445 u_int16_t wi_cell_search; 446 u_int16_t wi_out_of_range; 447 u_int16_t wi_delta_snr; 448 }; 449 450 /* 451 * PCF info struct (0xFD87). 452 */ 453 struct wi_ltv_pcf { 454 u_int16_t wi_len; 455 u_int16_t wi_type; 456 u_int16_t wi_medium_occupancy_limit; 457 u_int16_t wi_cfp_period; 458 u_int16_t wi_cfp_max_duration; 459 }; 460 461 /* 462 * Connection control characteristics. (0xFC00) 463 * 1 == Basic Service Set (BSS) 464 * 2 == Wireless Distribudion System (WDS) 465 * 3 == Pseudo IBSS 466 */ 467 #define WI_PORTTYPE_BSS 0x1 468 #define WI_PORTTYPE_WDS 0x2 469 #define WI_PORTTYPE_ADHOC 0x3 470 471 /* 472 * Mac addresses. (0xFC01, 0xFC08) 473 */ 474 struct wi_ltv_macaddr { 475 u_int16_t wi_len; 476 u_int16_t wi_type; 477 u_int8_t wi_mac_addr[6]; 478 }; 479 480 /* 481 * Station set identification (SSID). (0xFC02, 0xFC04) 482 */ 483 struct wi_ltv_ssid { 484 u_int16_t wi_len; 485 u_int16_t wi_type; 486 u_int16_t wi_id[17]; 487 }; 488 489 /* 490 * Set our station name. (0xFC0E) 491 */ 492 struct wi_ltv_nodename { 493 u_int16_t wi_len; 494 u_int16_t wi_type; 495 u_int16_t wi_nodename[17]; 496 }; 497 498 /* 499 * Multicast addresses to be put in filter. We're 500 * allowed up to 16 addresses in the filter. (0xFC80) 501 */ 502 struct wi_ltv_mcast { 503 u_int16_t wi_len; 504 u_int16_t wi_type; 505 struct ether_addr wi_mcast[16]; 506 }; 507 508 /* 509 * Information frame types. 510 */ 511 #define WI_INFO_NOTIFY 0xF000 /* Handover address */ 512 #define WI_INFO_COUNTERS 0xF100 /* Statistics counters */ 513 #define WI_INFO_SCAN_RESULTS 0xF101 /* Scan results */ 514 #define WI_INFO_LINK_STAT 0xF200 /* Link status */ 515 #define WI_INFO_ASSOC_STAT 0xF201 /* Association status */ 516 struct wi_assoc { 517 u_int16_t wi_assoc_stat; /* Association Status */ 518 #define ASSOC 1 519 #define REASSOC 2 520 #define DISASSOC 3 521 #define ASSOCFAIL 4 522 #define AUTHFAIL 5 523 u_int8_t wi_assoc_sta[6]; /* Station Address */ 524 u_int8_t wi_assoc_osta[6]; /* OLD Station Address */ 525 u_int16_t wi_assoc_reason; /* Reason */ 526 u_int16_t wi_assoc_reserve; /* Reserved */ 527 }; 528 529 #define WI_INFO_AUTH_REQUEST 0xF202 /* Authentication Request (AP) */ 530 #define WI_INFO_POWERSAVE_COUNT 0xF203 /* PowerSave User Count (AP) */ 531 532 /* 533 * Scan Results of Prism2 chip 534 */ 535 536 #define MAXAPINFO 30 537 struct wi_scan_header { 538 u_int16_t wi_reserve; /* future use */ 539 u_int16_t wi_reason; /* The reason this scan was initiated 540 1: Host initiated 541 2: Firmware initiated 542 3: Inquiry request from host */ 543 }; 544 545 struct wi_scan_data_p2 { 546 u_int16_t wi_chid; /* BSS Channel ID from Probe Res.(PR)*/ 547 u_int16_t wi_noise; /* Average Noise Level of the PR */ 548 u_int16_t wi_signal; /* Signal Level on the PR */ 549 u_int8_t wi_bssid[6]; /* MACaddress of BSS responder from PR */ 550 u_int16_t wi_interval; /* BSS beacon interval */ 551 u_int16_t wi_capinfo; /* BSS Capability Information 552 IEEE Std 802.11(1997) ,see 7.3.1.4 */ 553 u_int16_t wi_namelen; /* Length of SSID strings */ 554 u_int8_t wi_name[32]; /* SSID strings */ 555 u_int16_t wi_suprate[5]; /* Supported Rates element from the PR 556 IEEE Std 802.11(1997) ,see 7.3.2.2 */ 557 u_int16_t wi_rate; /* Data rate of the PR */ 558 #define WI_APRATE_1 0x0A /* 1 Mbps */ 559 #define WI_APRATE_2 0x14 /* 2 Mbps */ 560 #define WI_APRATE_5 0x37 /* 5.5 Mbps */ 561 #define WI_APRATE_11 0x6E /* 11 Mbps */ 562 }; 563 564 /* 565 * Scan Results of Lucent chip 566 */ 567 struct wi_scan_data { 568 u_int16_t wi_chid; /* BSS Channel ID from PR */ 569 u_int16_t wi_noise; /* Average Noise Level of the PR */ 570 u_int16_t wi_signal; /* Signal Level on the PR */ 571 u_int8_t wi_bssid[6]; /* MACaddress of BSS responder from PR */ 572 u_int16_t wi_interval; /* BSS beacon interval */ 573 u_int16_t wi_capinfo; /* BSS Capability Information 574 IEEE Std 802.11(1997) ,see 7.3.1.4 */ 575 u_int16_t wi_namelen; /* Length of SSID strings */ 576 u_int8_t wi_name[32]; /* SSID strings */ 577 }; 578 579 /* 580 * Hermes transmit/receive frame structure 581 */ 582 struct wi_frame { 583 u_int16_t wi_status; /* 0x00 */ 584 u_int16_t wi_rsvd0; /* 0x02 */ 585 u_int16_t wi_rsvd1; /* 0x04 */ 586 u_int16_t wi_q_info; /* 0x06 */ 587 u_int16_t wi_rsvd2; /* 0x08 */ 588 u_int16_t wi_rsvd3; /* 0x0A */ 589 u_int16_t wi_tx_ctl; /* 0x0C */ 590 u_int16_t wi_frame_ctl; /* 0x0E */ 591 u_int16_t wi_id; /* 0x10 */ 592 u_int8_t wi_addr1[6]; /* 0x12 */ 593 u_int8_t wi_addr2[6]; /* 0x18 */ 594 u_int8_t wi_addr3[6]; /* 0x1E */ 595 u_int16_t wi_seq_ctl; /* 0x24 */ 596 u_int8_t wi_addr4[6]; /* 0x26 */ 597 u_int16_t wi_dat_len; /* 0x2C */ 598 u_int8_t wi_dst_addr[6]; /* 0x2E */ 599 u_int8_t wi_src_addr[6]; /* 0x34 */ 600 u_int16_t wi_len; /* 0x3A */ 601 u_int16_t wi_dat[3]; /* 0x3C */ /* SNAP header */ 602 u_int16_t wi_type; /* 0x42 */ 603 }; 604 605 #define WI_802_3_OFFSET 0x2E 606 #define WI_802_11_OFFSET 0x44 607 #define WI_802_11_OFFSET_RAW 0x3C 608 609 #define WI_STAT_BADCRC 0x0001 610 #define WI_STAT_UNDECRYPTABLE 0x0002 611 #define WI_STAT_ERRSTAT 0x0003 612 #define WI_STAT_MAC_PORT 0x0700 613 #define WI_STAT_1042 0x2000 /* RFC1042 encoded */ 614 #define WI_STAT_TUNNEL 0x4000 /* Bridge-tunnel encoded */ 615 #define WI_STAT_WMP_MSG 0x6000 /* WaveLAN-II management protocol */ 616 #define WI_RXSTAT_MSG_TYPE 0xE000 617 618 #define WI_ENC_TX_802_3 0x00 619 #define WI_ENC_TX_802_11 0x11 620 #define WI_ENC_TX_E_II 0x0E 621 622 #define WI_ENC_TX_1042 0x00 623 #define WI_ENC_TX_TUNNEL 0xF8 624 625 #define WI_TXCNTL_MACPORT 0x00FF 626 #define WI_TXCNTL_STRUCTTYPE 0xFF00 627 628 /* 629 * SNAP (sub-network access protocol) constants for transmission 630 * of IP datagrams over IEEE 802 networks, taken from RFC1042. 631 * We need these for the LLC/SNAP header fields in the TX/RX frame 632 * structure. 633 */ 634 #define WI_SNAP_K1 0xaa /* assigned global SAP for SNAP */ 635 #define WI_SNAP_K2 0x00 636 #define WI_SNAP_CONTROL 0x03 /* unnumbered information format */ 637 #define WI_SNAP_WORD0 (WI_SNAP_K1 | (WI_SNAP_K1 << 8)) 638 #define WI_SNAP_WORD1 (WI_SNAP_K2 | (WI_SNAP_CONTROL << 8)) 639 #define WI_SNAPHDR_LEN 0x6 640